| /* |
| * drivers/amlogic/media/vout/backlight/bl_extern/i2c_lp8556.c |
| * |
| * Copyright (C) 2017 Amlogic, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/amlogic/media/vout/lcd/aml_bl_extern.h> |
| #include "bl_extern.h" |
| |
| |
| #define BL_EXTERN_NAME "i2c_lp8556" |
| #define BL_EXTERN_TYPE BL_EXTERN_I2C |
| |
| static struct bl_extern_config_s *ext_config; |
| static struct aml_bl_extern_i2c_dev_s *i2c_dev; |
| |
| #define BL_EXTERN_CMD_SIZE LCD_EXT_CMD_SIZE_DYNAMIC |
| static unsigned char init_on_table[] = { |
| 0xc0, 2, 0xa2, 0x20, |
| 0xc0, 2, 0xa5, 0x54, |
| 0xc0, 2, 0x00, 0xff, |
| 0xc0, 2, 0x01, 0x05, |
| 0xc0, 2, 0xa2, 0x20, |
| 0xc0, 2, 0xa5, 0x54, |
| 0xc0, 2, 0xa1, 0xb7, |
| 0xc0, 2, 0xa0, 0xff, |
| 0xc0, 2, 0x00, 0x80, |
| 0xff, 0, /*ending*/ |
| }; |
| |
| static unsigned char init_off_table[] = { |
| 0xff, 0, /*ending*/ |
| }; |
| |
| static int bl_extern_power_cmd_dynamic_size(unsigned char *table, int flag) |
| { |
| int i = 0, j, step = 0, max_len = 0; |
| unsigned char type, cmd_size; |
| int delay_ms, ret = 0; |
| |
| if (flag) |
| max_len = ext_config->init_on_cnt; |
| else |
| max_len = ext_config->init_off_cnt; |
| |
| while ((i + 1) < max_len) { |
| type = table[i]; |
| if (type == LCD_EXT_CMD_TYPE_END) |
| break; |
| if (bl_debug_print_flag) { |
| BLEX("%s: step %d: type=0x%02x, cmd_size=%d\n", |
| __func__, step, type, table[i+1]); |
| } |
| cmd_size = table[i+1]; |
| if (cmd_size == 0) |
| goto power_cmd_dynamic_next; |
| if ((i + 2 + cmd_size) > max_len) |
| break; |
| |
| if (type == LCD_EXT_CMD_TYPE_NONE) { |
| /* do nothing */ |
| } else if (type == LCD_EXT_CMD_TYPE_DELAY) { |
| delay_ms = 0; |
| for (j = 0; j < cmd_size; j++) |
| delay_ms += table[i+2+j]; |
| if (delay_ms > 0) |
| mdelay(delay_ms); |
| } else if (type == LCD_EXT_CMD_TYPE_CMD) { |
| ret = bl_extern_i2c_write(i2c_dev->client, |
| &table[i+2], cmd_size); |
| } else if (type == LCD_EXT_CMD_TYPE_CMD_DELAY) { |
| ret = bl_extern_i2c_write(i2c_dev->client, |
| &table[i+2], (cmd_size-1)); |
| if (table[i+cmd_size+1] > 0) |
| mdelay(table[i+cmd_size+1]); |
| } else { |
| BLEXERR("%s: %s(%d): type 0x%02x invalid\n", |
| __func__, ext_config->name, |
| ext_config->index, type); |
| } |
| power_cmd_dynamic_next: |
| i += (cmd_size + 2); |
| step++; |
| } |
| |
| return ret; |
| } |
| |
| static int bl_extern_power_cmd_fixed_size(unsigned char *table, int flag) |
| { |
| int i = 0, j, step = 0, max_len = 0; |
| unsigned char type, cmd_size; |
| int delay_ms, ret = 0; |
| |
| cmd_size = ext_config->cmd_size; |
| if (cmd_size < 2) { |
| BLEXERR("%s: invalid cmd_size %d\n", __func__, cmd_size); |
| return -1; |
| } |
| |
| if (flag) |
| max_len = ext_config->init_on_cnt; |
| else |
| max_len = ext_config->init_off_cnt; |
| |
| while ((i + cmd_size) <= max_len) { |
| type = table[i]; |
| if (type == LCD_EXT_CMD_TYPE_END) |
| break; |
| if (bl_debug_print_flag) { |
| BLEX("%s: step %d: type=0x%02x, cmd_size=%d\n", |
| __func__, step, type, cmd_size); |
| } |
| if (type == LCD_EXT_CMD_TYPE_NONE) { |
| /* do nothing */ |
| } else if (type == LCD_EXT_CMD_TYPE_DELAY) { |
| delay_ms = 0; |
| for (j = 0; j < (cmd_size - 1); j++) |
| delay_ms += table[i+1+j]; |
| if (delay_ms > 0) |
| mdelay(delay_ms); |
| } else if (type == LCD_EXT_CMD_TYPE_CMD) { |
| ret = bl_extern_i2c_write(i2c_dev->client, |
| &table[i+1], (cmd_size-1)); |
| } else if (type == LCD_EXT_CMD_TYPE_CMD_DELAY) { |
| ret = bl_extern_i2c_write(i2c_dev->client, |
| &table[i+1], (cmd_size-2)); |
| if (table[i+cmd_size-1] > 0) |
| mdelay(table[i+cmd_size-1]); |
| } else { |
| BLEXERR("%s: %s(%d): type 0x%02x invalid\n", |
| __func__, ext_config->name, |
| ext_config->index, type); |
| } |
| i += cmd_size; |
| step++; |
| } |
| |
| return ret; |
| } |
| |
| static int i2c_lp8556_power_ctrl(int flag) |
| { |
| unsigned char *table; |
| unsigned char cmd_size; |
| int ret = 0; |
| |
| if (ext_config == NULL) { |
| BLEXERR("invalid ext_config\n"); |
| return -1; |
| } |
| |
| cmd_size = ext_config->cmd_size; |
| if (flag) |
| table = ext_config->init_on; |
| else |
| table = ext_config->init_off; |
| if (cmd_size < 1) { |
| BLEXERR("%s: cmd_size %d is invalid\n", __func__, cmd_size); |
| return -1; |
| } |
| if (i2c_dev == NULL) { |
| BLEXERR("invalid i2c device\n"); |
| return -1; |
| } |
| |
| if (cmd_size == LCD_EXT_CMD_SIZE_DYNAMIC) |
| ret = bl_extern_power_cmd_dynamic_size(table, flag); |
| else |
| ret = bl_extern_power_cmd_fixed_size(table, flag); |
| |
| BLEX("%s: %s(%d): %d\n", |
| __func__, ext_config->name, ext_config->index, flag); |
| return ret; |
| } |
| |
| static int i2c_lp8556_power_on(void) |
| { |
| int ret; |
| |
| BLEX("%s\n", __func__); |
| |
| ret = i2c_lp8556_power_ctrl(1); |
| |
| return ret; |
| } |
| |
| static int i2c_lp8556_power_off(void) |
| { |
| int ret; |
| |
| ret = i2c_lp8556_power_ctrl(0); |
| return ret; |
| } |
| |
| static int i2c_lp8556_set_level(unsigned int level) |
| { |
| unsigned char tData[3]; |
| int ret = 0; |
| |
| if (i2c_dev == NULL) { |
| BLEXERR("invalid i2c device\n"); |
| return -1; |
| } |
| |
| tData[0] = 0x0; |
| tData[1] = level & 0xff; |
| ret = bl_extern_i2c_write(i2c_dev->client, tData, 2); |
| return ret; |
| } |
| |
| static int i2c_lp8556_update(void) |
| { |
| struct aml_bl_extern_driver_s *bl_extern = aml_bl_extern_get_driver(); |
| |
| if (bl_extern == NULL) { |
| BLEXERR("%s driver is null\n", BL_EXTERN_NAME); |
| return -1; |
| } |
| |
| ext_config = &bl_extern->config; |
| i2c_dev = aml_bl_extern_i2c_get_dev(); |
| |
| bl_extern->device_power_on = i2c_lp8556_power_on; |
| bl_extern->device_power_off = i2c_lp8556_power_off; |
| bl_extern->device_bri_update = i2c_lp8556_set_level; |
| |
| bl_extern->config.cmd_size = BL_EXTERN_CMD_SIZE; |
| bl_extern->config.init_on = init_on_table; |
| bl_extern->config.init_on_cnt = sizeof(init_on_table); |
| bl_extern->config.init_off = init_off_table; |
| bl_extern->config.init_off_cnt = sizeof(init_off_table); |
| |
| return 0; |
| } |
| |
| int i2c_lp8556_probe(void) |
| { |
| int ret = 0; |
| |
| ret = i2c_lp8556_update(); |
| |
| BLEX("%s: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| int i2c_lp8556_remove(void) |
| { |
| i2c_dev = NULL; |
| ext_config = NULL; |
| |
| return 0; |
| } |
| |