| /* |
| * sound/soc/amlogic/auge/spdif_match_table.c |
| * |
| * Copyright (C) 2019 Amlogic, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #define SPDIF_A 0 |
| #define SPDIF_B 1 |
| |
| struct spdif_chipinfo { |
| unsigned int id; |
| |
| /* add ch_cnt to ch_num */ |
| bool chnum_en; |
| /* |
| * axg, clear all irq bits |
| * after axg, such as g12a, clear each bits |
| * Reg_clr_interrupt[7:0] for each bit of irq_status[7:0]; |
| */ |
| bool clr_irq_all_bits; |
| /* no PaPb irq */ |
| bool irq_no_papb; |
| /* reg_hold_start_en; 1: add delay to match TDM out when share buff; */ |
| bool hold_start; |
| /* eq/drc */ |
| bool eq_drc_en; |
| /* pc, pd interrupt is separated. */ |
| bool pcpd_separated; |
| /* same source, spdif re-enable */ |
| bool same_src_spdif_reen; |
| }; |
| |
| struct spdif_chipinfo axg_spdif_chipinfo = { |
| .id = SPDIF_A, |
| .irq_no_papb = true, |
| .clr_irq_all_bits = true, |
| .pcpd_separated = true, |
| }; |
| |
| struct spdif_chipinfo g12a_spdif_a_chipinfo = { |
| .id = SPDIF_A, |
| .chnum_en = true, |
| .hold_start = true, |
| .eq_drc_en = true, |
| .pcpd_separated = true, |
| }; |
| |
| struct spdif_chipinfo g12a_spdif_b_chipinfo = { |
| .id = SPDIF_B, |
| .chnum_en = true, |
| .hold_start = true, |
| .eq_drc_en = true, |
| .pcpd_separated = true, |
| }; |
| |
| struct spdif_chipinfo tl1_spdif_a_chipinfo = { |
| .id = SPDIF_A, |
| .chnum_en = true, |
| .hold_start = true, |
| .eq_drc_en = true, |
| }; |
| |
| struct spdif_chipinfo tl1_spdif_b_chipinfo = { |
| .id = SPDIF_B, |
| .chnum_en = true, |
| .hold_start = true, |
| .eq_drc_en = true, |
| }; |
| |
| struct spdif_chipinfo sm1_spdif_a_chipinfo = { |
| .id = SPDIF_A, |
| .chnum_en = true, |
| .hold_start = true, |
| .eq_drc_en = true, |
| }; |
| |
| struct spdif_chipinfo sm1_spdif_b_chipinfo = { |
| .id = SPDIF_B, |
| .chnum_en = true, |
| .hold_start = true, |
| .eq_drc_en = true, |
| }; |
| |
| static const struct of_device_id aml_spdif_device_id[] = { |
| { |
| .compatible = "amlogic, axg-snd-spdif", |
| .data = &axg_spdif_chipinfo, |
| }, |
| { |
| .compatible = "amlogic, g12a-snd-spdif-a", |
| .data = &g12a_spdif_a_chipinfo, |
| }, |
| { |
| .compatible = "amlogic, g12a-snd-spdif-b", |
| .data = &g12a_spdif_b_chipinfo, |
| }, |
| { |
| .compatible = "amlogic, tl1-snd-spdif-a", |
| .data = &tl1_spdif_a_chipinfo, |
| }, |
| { |
| .compatible = "amlogic, tl1-snd-spdif-b", |
| .data = &tl1_spdif_b_chipinfo, |
| }, |
| { |
| .compatible = "amlogic, sm1-snd-spdif-a", |
| .data = &sm1_spdif_a_chipinfo, |
| }, |
| { |
| .compatible = "amlogic, sm1-snd-spdif-b", |
| .data = &sm1_spdif_b_chipinfo, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, aml_spdif_device_id); |