| * Amlogic Meson G12A USB3 PHY and OTG detection binding |
| |
| Required properties: |
| - compatible: Should be "amlogic,amlogic-new-usb3-v2"" |
| - #phys-cells: must be 0 (see phy-bindings.txt in this directory) |
| - reg: The base address and length of the registers |
| - interrupts: the interrupt specifier for the OTG detection |
| - clocks: phandles to the clocks for |
| - the USB3 PHY |
| - and peripheral mode/OTG detection |
| - clock-names: must contain "phy" and "peripheral" |
| |
| Optional properties: |
| - phy-supply: see phy-bindings.txt in this directory |
| |
| |
| Example: |
| usb3_phy0: phy@78080 { |
| compatible = "amlogic,amlogic-new-usb3-v2""; |
| #phy-cells = <0>; |
| reg = <0x0 0x78080 0x0 0x20>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; |
| clock-names = "phy", "peripheral"; |
| }; |
