| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2019 Amlogic, Inc. All rights reserved. |
| */ |
| |
| /dts-v1/; |
| |
| #include "meson-c1.dtsi" |
| |
| / { |
| compatible = "amlogic,c1"; |
| model = "Amlogic Meson c1 Development Board"; |
| |
| aliases { |
| serial0 = &uart_B; |
| serial1 = &uart_A; |
| serial2 = &uart_C; |
| serial3 = &uart_D; |
| serial4 = &uart_E; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| spi0 = &spifc; |
| spi1 = &spicc0; |
| spi2 = &spicc1; |
| tsensor0 = &tsensor; |
| }; |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| memory@0 { |
| device_type = "memory"; |
| linux,usable-memory = <0x0 0x80000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| secmon_reserved:linux,secmon { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x400000>; |
| alignment = <0x400000>; |
| alloc-ranges = <0x05000000 0x400000>; |
| }; |
| |
| dsp_fw_reserved:linux,dsp_fw { |
| compatible = "amlogic, aml_dsp_memory"; |
| reusable; |
| size = <0x800000>; |
| alignment = <0x400000>; |
| alloc-ranges = <0x3400000 0x800000>; |
| }; |
| |
| autocap_reserved:linux,autocap_reserved { |
| compatible = "amlogic, aml_autocap_memory"; |
| status = "okay"; |
| size = <0x25800000>; |
| alloc-ranges = <0x40000000 0x25800000>; |
| }; |
| |
| fb_reserved:linux,meson-fb { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x800000>; |
| alignment = <0x400000>; |
| }; |
| |
| isp_cma_reserved:linux,isp_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| status = "okay"; |
| size = <0x0 0x10000000>; |
| alignment = <0x0 0x400000>; |
| }; |
| |
| adapt_cma_reserved:linux,adapt_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| status = "okay"; |
| size = <0x0 0x1800000>; |
| alignment = <0x0 0x400000>; |
| }; |
| |
| ion_cma_reserved:linux,ion-dev { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x8000000>; |
| alignment = <0x400000>; |
| }; |
| |
| gdc_cma_reserved:linux,gdc_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| status = "okay"; |
| size = <0x04000000>; |
| alignment = <0x400000>; |
| }; |
| |
| jpegenc_cma_reserved:linux,jpegenc_cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x2400000>; |
| alignment = <0x400000>; |
| }; |
| }; |
| |
| free_reserved { |
| compatible = "amlogic, free_reserved"; |
| memory-region = <&autocap_reserved>; |
| status = "okay"; |
| }; |
| |
| main_12v: regulator-main_12v { |
| compatible = "regulator-fixed"; |
| regulator-name = "12V"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| regulator-always-on; |
| }; |
| |
| vcc_5v: regulator-vcc_5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_5V"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&main_12v>; |
| regulator-always-on; |
| }; |
| |
| vddq_1v2: regulator-vddq_1v2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDQ_1V2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| vin-supply = <&main_12v>; |
| regulator-always-on; |
| }; |
| |
| vddao_3v3: regulator-vddao_3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDAO_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&main_12v>; |
| regulator-always-on; |
| }; |
| |
| vcc_3v3: regulator-vcc_3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-always-on; |
| }; |
| |
| vddio_1v8: regulator-vddio_1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDIO_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-always-on; |
| }; |
| |
| vcc_1v8: regulator-vcc_1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_3v3>; |
| regulator-always-on; |
| }; |
| |
| vddio_card: gpio-regulator { |
| compatible = "regulator-gpio"; |
| |
| regulator-name = "VDDIO_CARD"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpios = <&gpio GPIOC_7 GPIO_ACTIVE_LOW>; |
| gpios-states = <1>; |
| |
| /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ |
| states = <1800000 1 |
| 3300000 0>; |
| }; |
| |
| /* Audio Related start */ |
| pdm_codec:pdm_codec{ |
| #sound-dai-cells = <0>; |
| compatible = "amlogic, pdm_dummy_codec"; |
| status = "okay"; |
| }; |
| |
| dummy_codec:dummy_codec{ |
| #sound-dai-cells = <0>; |
| compatible = "amlogic, aml_dummy_codec"; |
| status = "okay"; |
| }; |
| |
| a1_codec:a1_codec { |
| #sound-dai-cells = <0>; |
| compatible = "amlogic, a1_acodec"; |
| status = "okay"; |
| reg = <0xFE004800 0x20>; |
| tdmout_index = <1>; |
| tdmin_index = <1>; |
| dat0_ch_sel = <0>; |
| dacr_output_inv = <0>; |
| }; |
| |
| partitions: partitions{ |
| parts = <16>; |
| part-0 = <&rtos>; |
| part-1 = <&NBG>; |
| part-2 = <&dspA>; |
| part-3 = <&dspB>; |
| part-4 = <&recovery>; |
| part-5 = <&misc>; |
| part-6 = <&dto>; |
| part-7 = <&cri_data>; |
| part-8 = <¶m>; |
| part-9 = <&boot>; |
| part-10 = <&rsv>; |
| part-11= <&tee>; |
| part-12 = <&vendor>; |
| part-13 = <&odm>; |
| part-14 = <&system>; |
| part-15 = <&data>; |
| |
| rtos:rtos{ |
| pname = "rtos-0"; |
| size = <0x0 0x800000>; |
| mask = <8>; |
| }; |
| NBG:NBG{ |
| pname = "NBG"; |
| size = <0x0 0x200000>; |
| mask = <8>; |
| }; |
| dspA:dspA{ |
| pname = "dspA"; |
| size = <0x0 0x200000>; |
| mask = <1>; |
| }; |
| dspB:dspB{ |
| pname = "dspB"; |
| size = <0x0 0x200000>; |
| mask = <1>; |
| }; |
| recovery:recovery{ |
| pname = "recovery"; |
| size = <0x0 0x2800000>; |
| mask = <1>; |
| }; |
| misc:misc{ |
| pname = "misc"; |
| size = <0x0 0x800000>; |
| mask = <1>; |
| }; |
| dto:dto{ |
| pname = "dto"; |
| size = <0x0 0x800000>; |
| mask = <1>; |
| }; |
| cri_data:cri_data{ |
| pname = "cri_data"; |
| size = <0x0 0x800000>; |
| mask = <2>; |
| }; |
| rsv:rsv{ |
| pname = "rsv"; |
| size = <0x0 0x1000000>; |
| mask = <1>; |
| }; |
| param:param{ |
| pname = "param"; |
| size = <0x0 0x1000000>; |
| mask = <2>; |
| }; |
| boot:boot{ |
| pname = "boot"; |
| size = <0x0 0x2800000>; |
| mask = <1>; |
| }; |
| tee:tee{ |
| pname = "tee"; |
| size = <0x0 0x2000000>; |
| mask = <1>; |
| }; |
| vendor:vendor{ |
| pname = "vendor"; |
| size = <0x0 0x10000000>; |
| mask = <1>; |
| }; |
| odm:odm{ |
| pname = "odm"; |
| size = <0x0 0x10000000>; |
| mask = <1>; |
| }; |
| system:system{ |
| pname = "system"; |
| size = <0x0 0x80000000>; |
| mask = <1>; |
| }; |
| data:data{ |
| pname = "data"; |
| size = <0xffffffff 0xffffffff>; |
| mask = <4>; |
| }; |
| }; |
| |
| auge_sound { |
| compatible = "amlogic, a1-sound-card"; |
| aml-audio-card,name = "AML-AUGESOUND"; |
| |
| /*avout mute gpio*/ |
| avout_mute-gpios = <&gpio GPIOD_11 GPIO_ACTIVE_HIGH>; |
| |
| aml-audio-card,dai-link@0 { |
| format = "dsp_a"; |
| mclk-fs = <512>; |
| //continuous-clock; |
| //bitclock-inversion; |
| //frame-inversion; |
| /* master mode */ |
| bitclock-master = <&tdma>; |
| frame-master = <&tdma>; |
| /* slave mode */ |
| /* |
| * bitclock-master = <&tdmacodec>; |
| * frame-master = <&tdmacodec>; |
| */ |
| suffix-name = "alsaPORT-pcm"; |
| tdmacpu: cpu { |
| sound-dai = <&tdma>; |
| dai-tdm-slot-tx-mask = |
| <1 1 1 1 1 1 1 1>; |
| dai-tdm-slot-rx-mask = |
| <1 1 1 1 1 1 1 1>; |
| dai-tdm-slot-num = <8>; |
| dai-tdm-slot-width = <32>; |
| system-clock-frequency = <24576000>; |
| }; |
| tdmacodec: codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| |
| aml-audio-card,dai-link@1 { |
| format = "i2s";// "dsp_a"; |
| mclk-fs = <256>; |
| //continuous-clock; |
| //bitclock-inversion; |
| //frame-inversion; |
| /* master mode */ |
| bitclock-master = <&tdmb>; |
| frame-master = <&tdmb>; |
| /* slave mode */ |
| //bitclock-master = <&tdmbcodec>; |
| //frame-master = <&tdmbcodec>; |
| /* suffix-name, sync with android audio hal |
| * what's the dai link used for |
| */ |
| suffix-name = "alsaPORT-i2s"; |
| tdmbcpu: cpu { |
| sound-dai = <&tdmb>; |
| dai-tdm-slot-tx-mask = <1 1>; |
| dai-tdm-slot-rx-mask = <1 1>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <32>; |
| system-clock-frequency = <12288000>; |
| }; |
| tdmbcodec: codec { |
| sound-dai = <&a1_codec>; |
| }; |
| }; |
| |
| #if 0 |
| aml-audio-card,dai-link@2 { |
| format = "i2s";// "dsp_a"; |
| mclk-fs = <256>; |
| //continuous-clock; |
| //bitclock-inversion; |
| //frame-inversion; |
| /* master mode */ |
| bitclock-master = <&tdmlb>; |
| frame-master = <&tdmlb>; |
| /* slave mode */ |
| //bitclock-master = <&tdmlbcodec>; |
| //frame-master = <&tdmlbcodec>; |
| /* suffix-name, sync with android audio hal |
| * what's the dai link used for |
| */ |
| suffix-name = "alsaPORT-i2s"; |
| cpu { |
| sound-dai = <&tdmlb>; |
| dai-tdm-slot-tx-mask = <1 1>; |
| dai-tdm-slot-rx-mask = <1 1>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <32>; |
| system-clock-frequency = <12288000>; |
| }; |
| tdmlbcodec: codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| #endif |
| |
| aml-audio-card,dai-link@2 { |
| mclk-fs = <64>; |
| /* suffix-name, sync with android audio hal |
| * what's the dai link used for |
| */ |
| suffix-name = "alsaPORT-pdm"; |
| cpu { |
| sound-dai = <&pdm>; |
| }; |
| codec { |
| sound-dai = <&pdm_codec>; |
| }; |
| }; |
| |
| #if 0 |
| aml-audio-card,dai-link@3 { |
| mclk-fs = <128>; |
| /* suffix-name, sync with android audio hal used for */ |
| suffix-name = "alsaPORT-spdif"; |
| cpu { |
| sound-dai = <&spdifa>; |
| system-clock-frequency = <6144000>; |
| }; |
| codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| #endif |
| |
| aml-audio-card,dai-link@4 { |
| mclk-fs = <256>; |
| continuous-clock; |
| suffix-name = "alsaPORT-loopback"; |
| cpu { |
| sound-dai = <&loopback>; |
| system-clock-frequency = <12288000>; |
| }; |
| codec { |
| sound-dai = <&dummy_codec>; |
| }; |
| }; |
| }; |
| audiolocker: locker { |
| compatible = "amlogic, audiolocker"; |
| clocks = <&clkaudio CLKID_AUDIO_LOCKER_OUT |
| &clkaudio CLKID_AUDIO_LOCKER_IN |
| &clkaudio CLKID_AUDIO_MCLK_C |
| &clkaudio CLKID_AUDIO_MCLK_D |
| &clkc CLKID_FCLK_DIV2 |
| &clkc CLKID_FCLK_DIV3>; |
| clock-names = "lock_out", "lock_in", "out_src", |
| "in_src", "out_calc", "in_ref"; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "irq"; |
| frequency = <49000000>; /* pll */ |
| dividor = <49>; /* locker's parent */ |
| status = "okay"; |
| }; |
| /* Audio Related end */ |
| aml_enc { |
| compatible = "cnm, MultiEnc"; |
| dev_name = "amvenc_multi"; |
| status = "okay"; |
| config_mm_sz_mb = <256>; |
| clocks = <&clkc CLKID_SYS_DOS |
| &clkc CLKID_DOS_APB |
| &clkc CLKID_WAVE_A_GATE |
| &clkc CLKID_WAVE_B_GATE |
| &clkc CLKID_WAVE_C_GATE>; |
| clock-names = "clk_dos", |
| "clk_apb_dos", |
| "clk_MultiEnc_A", |
| "clk_MultiEnc_B", |
| "clk_MultiEnc_C"; |
| interrupts = <0 82 1 |
| 0 83 1>; |
| interrupt-names = "multienc_irq", |
| "multienc_idle_irq"; |
| #address-cells=<1>; |
| #size-cells=<1>; |
| ranges; |
| io_reg_base { |
| reg = <0xfe070000 0x10000>; |
| }; |
| }; |
| sensor: sensor { |
| compatible = "soc, sensor"; |
| status = "okay"; |
| sensor-name = "os08a10"; /*imx290;os08a10;imx227*/ |
| pinctrl-names= "default"; |
| pinctrl-0= <&clk12_24_m13_pins>; |
| clocks = <&clkc CLKID_24M>; |
| clock-names = "g12a_24m"; |
| reset = <&gpio GPIOM_12 GPIO_ACTIVE_HIGH>; |
| ir_cut_gpio = <&gpio GPIOA_10 GPIO_ACTIVE_HIGH |
| &gpio GPIOA_12 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| iq: iq { |
| compatible = "soc, iq"; |
| status = "okay"; |
| sensor-name = "os08a10"; /*imx290;os08a10;imx227*/ |
| }; |
| |
| cpu_opp_table0: cpu_opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp00 { |
| opp-hz = /bits/ 64 <100000000>; |
| opp-microvolt = <730000>; |
| }; |
| opp01 { |
| opp-hz = /bits/ 64 <250000000>; |
| opp-microvolt = <730000>; |
| }; |
| opp02 { |
| opp-hz = /bits/ 64 <500000000>; |
| opp-microvolt = <730000>; |
| }; |
| opp03 { |
| opp-hz = /bits/ 64 <667000000>; |
| opp-microvolt = <750000>; |
| }; |
| opp04 { |
| opp-hz = /bits/ 64 <1000000000>; |
| opp-microvolt = <770000>; |
| }; |
| opp05 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <850000>; |
| }; |
| opp06 { |
| opp-hz = /bits/ 64 <1416000000>; |
| opp-microvolt = <900000>; |
| }; |
| opp07 { |
| opp-hz = /bits/ 64 <1512000000>; |
| opp-microvolt = <940000>; |
| }; |
| }; |
| |
| cpufreq-meson { |
| compatible = "amlogic, cpufreq-meson"; |
| status = "okay"; |
| }; |
| |
| gpio_keypad{ |
| compatible = "amlogic, gpio_keypad"; |
| status = "okay"; |
| scan_period = <20>; |
| key_num = <1>; |
| key_name = "power"; |
| key_code = <116>; |
| key-gpios = <&gpio GPIOD_3 GPIO_ACTIVE_HIGH>; |
| detect_mode = <0>;/*0:polling mode, 1:irq mode*/ |
| }; |
| |
| adc_keypad { |
| compatible = "amlogic, adc_keypad"; |
| status = "okay"; |
| key_name = "update", "vol-", "vol+", "ok"; |
| key_num = <4>; |
| io-channels = <&saradc 2>; |
| io-channel-names = "key-chan-2"; |
| key_chan = <2 2 2 2>; |
| key_code = <141 114 115 28>; |
| key_val = <0 143 266 389>; //val=voltage/1800mV*1023 |
| key_tolerance = <40 40 40 40>; |
| }; |
| }; |
| |
| &cpu0 { |
| cpu-supply = <&vddcpu0>; |
| operating-points-v2 = <&cpu_opp_table0>; |
| }; |
| |
| &cpu1 { |
| cpu-supply = <&vddcpu0>; |
| operating-points-v2 = <&cpu_opp_table0>; |
| }; |
| |
| &pwm_ab { |
| status = "okay"; |
| }; |
| |
| &vddcpu0 { |
| status = "okay"; |
| }; |
| |
| /* Audio Related start */ |
| &audiobus { |
| tdma: tdm@0 { |
| compatible = "amlogic, a1-snd-tdma"; |
| #sound-dai-cells = <0>; |
| dai-tdm-lane-slot-mask-in = <0 1>; |
| dai-tdm-lane-oe-slot-mask-out = <1 0>; |
| dai-tdm-clk-sel = <0>; |
| clocks = <&clkaudio CLKID_AUDIO_MCLK_A |
| &clkc CLKID_FCLK_DIV3>; |
| clock-names = "mclk", "clk_srcpll"; |
| pinctrl-names = "tdm_pins"; |
| pinctrl-0 = <&tdmout_a &tdmin_a>; |
| |
| status = "okay"; |
| }; |
| |
| tdmb: tdm@1 { |
| compatible = "amlogic, a1-snd-tdmb"; |
| #sound-dai-cells = <0>; |
| dai-tdm-lane-slot-mask-in = <1 0 0 0>; |
| dai-tdm-lane-slot-mask-out = <1 0 0 0>; |
| /* dai-tdm-lane-oe-slot-mask-in = <0 1>; */ |
| dai-tdm-clk-sel = <1>; |
| clocks = <&clkaudio CLKID_AUDIO_MCLK_B |
| &clkc CLKID_FCLK_DIV3>; |
| //&clkaudio CLKID_AUDIO_SPDIFOUT_A>; |
| clock-names = "mclk", "clk_srcpll"; |
| pinctrl-names = "tdm_pins"; |
| pinctrl-0 = <&tdmb_mclk &tdmout_b /*&tdmin_b*/>; |
| |
| mclk_pad = <0>; /* 0: mclk_0; 1: mclk_1 */ |
| |
| /* tdmin data comes from ACODEC adc */ |
| acodec_adc = <1>; |
| |
| /* |
| * 0: tdmout_a; |
| * 1: tdmout_b; |
| * 2: tdmout_c; |
| * 3: spdifout; |
| * 4: spdifout_b; |
| */ |
| //samesource_sel = <3>; |
| start_clk_enable = <1>; |
| |
| status = "okay"; |
| }; |
| |
| tdmlb:tdm@3 { |
| compatible = "amlogic, a1-snd-tdmlb"; |
| #sound-dai-cells = <0>; |
| |
| dai-tdm-lane-lb-slot-mask-in = <1 0 0 0>; |
| dai-tdm-clk-sel = <1>; |
| |
| clocks = <&clkaudio CLKID_AUDIO_MCLK_B |
| &clkc CLKID_FCLK_DIV3>; |
| clock-names = "mclk", "clk_srcpll"; |
| |
| /* |
| * select tdmin_lb src; |
| * AXG |
| * 0: TDMOUTA |
| * 1: TDMOUTB |
| * 2: TDMOUTC |
| * 3: PAD_TDMINA |
| * 4: PAD_TDMINB |
| * 5: PAD_TDMINC |
| * |
| * G12A/G12B |
| * 0: TDMOUTA |
| * 1: TDMOUTB |
| * 2: TDMOUTC |
| * 3: PAD_TDMINA_DIN* |
| * 4: PAD_TDMINB_DIN* |
| * 5: PAD_TDMINC_DIN* |
| * 6: PAD_TDMINA_D*, oe pin |
| * 7: PAD_TDMINB_D*, oe pin |
| * |
| * TL1/SM1 |
| * 0: TDMOUTA |
| * 1: TDMOUTB |
| * 2: TDMOUTC |
| * 3: PAD_TDMINA_DIN* |
| * 4: PAD_TDMINB_DIN* |
| * 5: PAD_TDMINC_DIN* |
| * 6: PAD_TDMINA_D* |
| * 7: PAD_TDMINB_D* |
| * 8: PAD_TDMINC_D* |
| * 9: HDMIRX_I2S |
| * 10: ACODEC_ADC |
| * |
| * A1 |
| * 0: TDMOUTA |
| * 1: TDMOUTB |
| * 3: PAD_TDMINA_DIN* |
| * 4: PAD_TDMINB_DIN* |
| */ |
| |
| lb-src-sel = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| spdifa: spdif@0 { |
| compatible = "amlogic, a1-snd-spdif-a"; |
| #sound-dai-cells = <0>; |
| clocks = <&clkc CLKID_FCLK_DIV3 |
| &clkaudio CLKID_AUDIO_GATE_SPDIFIN |
| &clkaudio CLKID_AUDIO_SPDIFIN>; |
| clock-names = "fixed_clk", "gate_spdifin", "clk_spdifin"; |
| interrupts = |
| <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "irq_spdifin"; |
| pinctrl-names = "spdif_pins"; |
| pinctrl-0 = <&spdifin>; |
| |
| status = "disabled"; |
| }; |
| |
| pdm: pdm { |
| compatible = "amlogic, a1-snd-pdm"; |
| #sound-dai-cells = <0>; |
| |
| clocks = <&clkaudio CLKID_AUDIO2_GATE_PDM |
| &clkc CLKID_FCLK_DIV2 |
| &clkaudio CLKID_AUDIO2_PDM_DCLK |
| &clkaudio CLKID_AUDIO2_PDM_SYSCLK>; |
| clock-names = "gate", |
| "sysclk_srcpll", |
| "pdm_dclk", |
| "pdm_sysclk"; |
| |
| pinctrl-names = "pdm_pins"; |
| pinctrl-0 = <&pdmin>; |
| |
| /* mode 0~4, defalut:1 */ |
| filter_mode = <1>; |
| lane-mask-in = <1 1 0 0>; |
| |
| status = "okay"; |
| }; |
| |
| loopback: loopback { |
| compatible = "amlogic, a1-loopbacka"; |
| #sound-dai-cells = <0>; |
| |
| original-src = <&tdmb>; |
| //tdmin_lb-src = <&tdmin_lb>; |
| |
| clocks = <&clkaudio CLKID_AUDIO2_GATE_PDM |
| &clkc CLKID_FCLK_DIV2 |
| &clkc CLKID_FCLK_DIV2 |
| &clkaudio CLKID_AUDIO2_PDM_DCLK |
| &clkaudio CLKID_AUDIO2_PDM_SYSCLK |
| &clkc CLKID_FCLK_DIV3 |
| &clkaudio CLKID_AUDIO_MCLK_B>; |
| clock-names = "pdm_gate", |
| "pdm_sysclk_srcpll", |
| "pdm_dclk_srcpll", |
| "pdm_dclk", |
| "pdm_sysclk", |
| "tdminlb_mpll", |
| "tdminlb_mclk"; |
| |
| /* datain src |
| * 0: tdmin_a; |
| * 1: tdmin_b; |
| * 2: tdmin_c; |
| * 3: spdifin; |
| * 4: pdmin; |
| */ |
| datain_src = <4>; |
| datain_chnum = <2>; |
| datain_chmask = <0x3>; |
| /* config which data pin for loopback */ |
| datain-lane-mask-in = <1 0 0 0>; |
| |
| /* calc mclk for datalb */ |
| mclk-fs = <256>; |
| |
| /* tdmin_lb src |
| * 0: tdmoutA |
| * 1: tdmoutB |
| * 2: tdmoutC |
| * 3: PAD_TDMINA_DIN*, refer to core pinmux |
| * 4: PAD_TDMINB_DIN*, refer to core pinmux |
| * 5: PAD_TDMINC_DIN*, refer to core pinmux |
| * 6: PAD_TDMINA_D*, oe, refer to core pinmux |
| * 7: PAD_TDMINB_D*, oe, refer to core pinmux |
| */ |
| /* if tdmin_lb >= 3, use external loopback */ |
| datalb_src = <1>; |
| datalb_chnum = <2>; |
| datalb_chmask = <0x3>; |
| /* config which data pin as loopback */ |
| datalb-lane-mask-in = <1 0 0 0>; |
| |
| status = "okay"; |
| }; |
| }; /* end of audiobus */ |
| /* Audio Related end */ |
| |
| &i2c2 { |
| status = "okay"; |
| pinctrl-names="default"; |
| pinctrl-0=<&i2c2_master_pins2>; |
| clock-frequency = <100000>; /* default 100k */ |
| sensor-i2c@6c { |
| compatible = "arm, i2c-sensor"; |
| reg = <0x6c>; |
| reg-names = "i2c-sensor"; |
| slave-addr = <0x6c>; |
| reg-type = <2>; |
| reg-data-type = <1>; |
| link-device = <&phycsi>; |
| }; |
| }; |
| |
| &isp { |
| status = "okay"; |
| memory-region = <&isp_cma_reserved>; |
| }; |
| |
| &adapter { |
| status = "okay"; |
| memory-region = <&adapt_cma_reserved>; |
| }; |
| |
| &pinctrl_periphs { |
| /* Audio Related start */ |
| tdmout_a: tdmout_a { |
| mux { /* GPIOX_11, GPIOX_10, GPIOX_9 */ |
| groups = "tdm_a_sclk", |
| "tdm_a_fs", |
| "tdm_a_dout0"; |
| function = "tdm_a"; |
| }; |
| }; |
| |
| tdmin_a: tdmin_a { |
| mux { /* GPIOX_8 */ |
| groups = "tdm_a_din1"; |
| function = "tdm_a"; |
| }; |
| }; |
| |
| tdmb_mclk: tdmb_mclk { |
| mux { |
| groups = "mclk_0"; |
| function = "mclk_0"; |
| drive-strength = <2>; |
| }; |
| }; |
| |
| tdmout_b: tdmout_b { |
| mux { /* GPIOA_1, GPIOA_2, GPIOA_3 */ |
| groups = "tdm_b_sclk", |
| "tdm_b_fs", |
| "tdm_b_dout0"; |
| function = "tdm_b"; |
| drive-strength = <2>; |
| }; |
| }; |
| |
| tdmin_b:tdmin_b { |
| mux { /* GPIOA_7 */ |
| groups = "tdm_b_din0"; |
| function = "tdm_b"; |
| drive-strength = <2>; |
| }; |
| }; |
| |
| spdifin: spdifin { |
| mux {/* GPIOF_6 */ |
| groups = "spdif_in_f6"; |
| function = "spdif_in"; |
| }; |
| }; |
| |
| pdmin: pdmin { |
| mux { /* GPIOA_6, GPIOA_7, GPIOA_8, GPIOA_9 */ |
| groups = |
| "pdm_din1_m", |
| "pdm_din0_m", |
| "pdm_dclk_m"; |
| function = "pdm"; |
| }; |
| }; |
| |
| /* Audio Related end */ |
| clk12_24_m13_pins:clk12_24_m13_pins { |
| mux { |
| groups = "clk12_24_m13"; |
| function = "clk12_24"; |
| drive-strength = <4>; |
| }; |
| }; |
| }; /* end of pinctrl_periphs */ |
| |
| &gdc { |
| status = "okay"; |
| memory-region = <&gdc_cma_reserved>; |
| }; |
| |
| /* emmc storage */ |
| &sd_emmc_c { |
| status = "okay"; |
| pinctrl-0 = <&emmc_pins>; |
| pinctrl-1 = <&emmc_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| bus-width = <8>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| max-frequency = <50000000>; |
| non-removable; |
| disable-wp; |
| //mmc-ddr-1_8v; |
| // mmc-hs200-1_8v; |
| // mmc-hs400-1_8v; |
| card_type = <1>;/*emmc:1,sdcard:2,sdio:3*/ |
| vmmc-supply = <&vcc_3v3>; |
| vqmmc-supply = <&vcc_1v8>; |
| }; |
| |
| /* SD card */ |
| &sd_emmc_b { |
| status = "okay"; |
| pinctrl-0 = <&sdcard_pins>; |
| pinctrl-1 = <&sdcard_clk_gate_pins>; |
| pinctrl-2 = <&sd_1bit_pins>; |
| pinctrl-3 = <&b_uart_pins1 |
| &sdcard_clk_gate_pins &ao_to_sd_uart_pins>; |
| pinctrl-4 = <&b_uart_pins1 |
| &sd_1bit_pins &ao_to_sd_uart_pins>; |
| pinctrl-5 = <&sdcard_pins &b_uart_enable_pins1>; |
| pinctrl-6 = <&b_uart_pins1 |
| &ao_to_sd_uart_pins>; |
| pinctrl-7 = <&sdcard_pins &b_uart_enable_pins1>; |
| pinctrl-8 = <&b_uart_pins1 |
| &ao_to_sd_uart_pins>; |
| pinctrl-names = "sd_default", |
| "clk-gate", |
| "sd_1bit_pins", |
| "sd_clk_cmd_uart_pins", |
| "sd_1bit_uart_pins", |
| "sd_to_ao_uart_pins", |
| "ao_to_sd_uart_pins", |
| "sd_to_ao_jtag_pins", |
| "ao_to_sd_jtag_pins"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| max-frequency = <200000000>; |
| disable-wp; |
| cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_HIGH>; |
| dat1-gpios = <&gpio GPIOC_1 GPIO_ACTIVE_HIGH>; |
| cd-inverted; |
| card_type = <5>; |
| vmmc-supply = <&vcc_3v3>; |
| vqmmc-supply = <&vddio_card>; |
| }; |
| |
| /*sdio*/ |
| &sd_emmc_a { |
| status = "okay"; |
| pinctrl-0 = <&sdio_pins>; |
| pinctrl-1 = <&sdio_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| non-removable; |
| max-frequency = <200000000>; |
| disable-wp; |
| cap-sdio-irq; |
| keep-power-in-suspend; |
| card_type = <3>; |
| vmmc-supply = <&vcc_3v3>; |
| vqmmc-supply = <&vcc_1v8>; |
| }; |
| |
| &dwc2_a { |
| status = "okay"; |
| /** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/ |
| controller-type = <3>; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |
| |
| &usb2_phy_v2 { |
| status = "okay"; |
| portnum = <1>; |
| otg-phy-index = <0>; |
| }; |
| |
| &usb3_phy_v2 { |
| status = "okay"; |
| portnum = <0>; |
| otg = <1>; |
| gpio-vbus-power = "GPIOD_9"; |
| gpios = <&gpio GPIOD_9 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &uart_B { |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| pinctrl-names="default"; |
| pinctrl-0=<&i2c3_master_pins2>; |
| clock-frequency = <400000>; /* max supported freq */ |
| |
| pcf8536@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &spifc { |
| status = "disabled"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spifc_pins>; |
| spi-nor@1 { |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <96000000>; |
| }; |
| spi-nand@0 { |
| compatible = "spi-nand"; |
| status = "okay"; |
| reg = <0>; |
| spi-max-frequency = <96000000>; |
| bl_mode = <1>; |
| fip_copies = <4>; |
| fip_size = <0x200000>; |
| partition = <&snand_partitions>; |
| snand_partitions: snand_partitions{ |
| bootloader{ |
| offset=<0x0 0x0>; |
| size=<0x0 0x0>; |
| }; |
| tpl{ |
| offset=<0x0 0x0>; |
| size=<0x0 0x0>; |
| }; |
| logo{ |
| offset=<0x0 0x0>; |
| size=<0x0 0x200000>; |
| }; |
| recovery{ |
| offset=<0x0 0x0>; |
| size=<0x0 0x1000000>; |
| }; |
| boot{ |
| offset=<0x0 0x0>; |
| size=<0x0 0x1000000>; |
| }; |
| system{ |
| offset=<0x0 0x0>; |
| size=<0x0 0x4000000>; |
| }; |
| data{ |
| offset=<0xffffffff 0xffffffff>; |
| size=<0x0 0x0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &spicc0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spicc0_pins1>; |
| cs-gpios = <&gpio GPIOA_8 0>, |
| <&gpio GPIOA_9 0>; |
| }; |
| |
| &spicc1 { |
| status = "disabled"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spicc1_pins1>; |
| cs-gpios = <&gpio GPIOA_14 0>; |
| }; |
| |
| &uart_A { |
| status = "okay"; |
| }; |
| |
| &aml_wifi { |
| status = "okay"; |
| }; |
| |
| &aml_bt { |
| status = "okay"; |
| }; |
| |
| &pwm_ef { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm_e_pins1>; |
| }; |
| |
| ðmac { |
| status = "okay"; |
| pinctrl-names = "internal_eth_pins"; |
| pinctrl-0 = <&internal_eth_pins>; |
| mc_val = <0x4be04>; |
| internal_phy=<1>; |
| }; |
| |
| &freertos { |
| status = "okay"; |
| }; |
| |
| &saradc { |
| status = "okay"; |
| vref-supply = <&vcc_1v8>; |
| }; |
| |
| &meson_fb { |
| status = "okay"; |
| display_size_default = <1920 1080 1920 1080 32>; |
| mem_size = <0x00800000>; |
| }; |
