| This is a introduction for flashlight chip MT6336 |
| |
| [Scope] |
| - Two channel for two LEDs |
| |
| |
| [Hardware Interface] |
| - I2C |
| * For general control |
| * Slave address 0x55, 0x56, 0x57, 0x58 |
| |
| |
| [Limit] |
| - Channel couple: |
| * Flash/Torch enable |
| * Flash/Torch LED current source |
| * Flash mode watchdog timer |
| * Torch mode watchdog timer |
| * Flash/Torch timeout |
| * Flash mode step up/down timing (default: 10 us) |
| * Flash mode output regulation voltage (default: 5.0 V) |
| |
| - Channel decouple: |
| * Flash/Torch mode enable |
| * Brightness level |
| |
| - Torch Mode |
| * Step current: 12.5 mA |
| * Min currnet: 12.5 mA |
| * Max current: 200 mA |
| |
| - Flash Mode |
| * Step current: 12.5 mA |
| * Min currnet: 12.5 mA |
| * Max current: 1500 mA |
| * Max current for two channel: 2500 mA |
| * Min protected timeout: 200 ms |
| * Max protected timeout: 800 ms |
| |
