| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2020 MediaTek Inc. |
| * |
| */ |
| /dts-v1/; |
| |
| /plugin/; |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/memory/mt8696-larb-port.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/clock/mt8696-clk.h> |
| #include <dt-bindings/power/mt8696-power.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/gce/mt8696-gce.h> |
| #include <dt-bindings/pinctrl/mt8696-pinfunc.h> |
| #include <dt-bindings/soc/mediatek,boot-mode.h> |
| #include <dt-bindings/usb/pd.h> |
| |
| / { |
| board_id = <0x3>; |
| }; |
| |
| &odm { |
| extcon_usb: extcon-iddig { |
| compatible = "linux,extcon-usb-gpio"; |
| status = "disabled"; |
| }; |
| |
| extcon_kirkwood_usb: extcon-kirkwood { |
| compatible = "linux,extcon-usb-kirkwood"; |
| status = "disabled"; |
| }; |
| |
| gpio_keys: gpio_keys { |
| compatible = "gpio-keys"; |
| }; |
| |
| /* WOW IRQ : GPIO0 => EINT11 */ |
| mediatek,mt7921-wifi { |
| compatible = "mediatek,mt7663_wifi_ctrl"; |
| interrupt-parent = <&pio>; |
| interrupts = <11 IRQ_TYPE_LEVEL_LOW 0 0x0>; |
| status = "okay"; |
| }; |
| |
| /* WOBLE IRQ GPIO1 => EINT12*/ |
| mediatek,mt7668-bt { |
| compatible = "mediatek,mt7668_bt_ctrl"; |
| interrupt-parent = <&pio>; |
| interrupts = <12 IRQ_TYPE_LEVEL_LOW 1 0x0>; |
| status = "okay"; |
| }; |
| mmc_fixed_3v3: fixedregulator@0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "mmc_power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| }; |
| |
| mmc_fixed_1v8_io: fixedregulator@1 { |
| compatible = "regulator-fixed"; |
| regulator-name = "mmc_io"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| enable-active-high; |
| }; |
| |
| mmc2_fixed_pwr: fixedregulator@2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "sdio_power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| mmc2_fixed_pmu: fixedregulator@3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "sdio_pmu"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| startup-delay-us = <200000>; |
| gpio = <&pio 26 0>; |
| enable-active-high; |
| }; |
| |
| rt-pd-manager { |
| compatible = "mediatek,rt-pd-manager"; |
| }; |
| |
| sound: sound { |
| compatible = "mediatek,mt8696-evb"; |
| mediatek,platform = <&afe>; |
| status = "okay"; |
| }; |
| |
| sound1: sound1 { |
| compatible = "mediatek,mt8696-card1"; |
| mediatek,platform = <&afe32>; |
| mediatek,multi-in-audio-codec = <&earc_rx_codec>; |
| mediatek,multi-in-codec-dai-name = "mtk-earc-rx-codec-dai"; |
| status = "okay"; |
| }; |
| |
| ntc_ddr: thermal-sensor@0 { |
| compatible = "murata,ncp03wf104"; |
| pullup-uv = <1800000>; |
| pullup-ohm = <100000>; |
| pulldown-ohm = <0>; |
| io-channels = <&auxadc 0>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| ntc_wifi: thermal-sensor@1 { |
| compatible = "murata,ncp03wf104"; |
| pullup-uv = <1800000>; |
| pullup-ohm = <100000>; |
| pulldown-ohm = <0>; |
| io-channels = <&auxadc 2>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| ntc_soc_bottom: thermal-sensor@2 { |
| compatible = "murata,ncp03wf104"; |
| pullup-uv = <1800000>; |
| pullup-ohm = <100000>; |
| pulldown-ohm = <0>; |
| io-channels = <&auxadc 3>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| usb_vbus_5v0: fixedregulator@4 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-type = "voltage"; |
| regulator-always-on; |
| }; |
| |
| usb_vbus_3v3: fixedregulator@5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb vbus"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &afe { |
| mediatek,etdm-clock-modes = <0 1>; |
| mediatek,etdm-out-data-modes = <1 1>; |
| mediatek,etdm-in-data-modes = <1 1>; |
| mediatek,hdmi-clk-force-on = <1>; |
| status = "okay"; |
| }; |
| |
| &afe32 { |
| mediatek,etdm-in-data-modes = <1 1 0>; |
| mediatek,etdm-out-data-modes = <1 1 1>; |
| mediatek,spdif-in-arc-mux = <2>; |
| status = "okay"; |
| }; |
| |
| &auxadc { |
| status = "okay"; |
| }; |
| |
| &dramc { |
| support_ch_cnt = <2>; |
| ch_cnt = <2>; |
| mr_cnt = <4>; |
| }; |
| |
| ðernet { |
| pinctrl-names = "default","sleep"; |
| pinctrl-0 = <ð_pins_default>; |
| pinctrl-1 = <ð_pins_sleep>; |
| phy-handle = <ð_phy>; |
| mac-address = [00 00 00 00 00 00]; |
| phy-mode = "rgmii-rxid"; |
| status = "okay"; |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eth_phy: ethernet-phy@1 { |
| compatible = "ethernet-phy-id001c.c916"; |
| realtek,aldps-enable; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &gpio_keys{ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_keys_default>; |
| status = "okay"; |
| |
| connect_button: button@0 { |
| debounce_interval = <50>; |
| wakeup-source; |
| gpio-key,wakeup = <1>; |
| gpios = <&pio 97 1>; |
| label = "KEY_CONNECT"; |
| linux,input-type = <0x1>; |
| linux,code = <218>; |
| }; |
| }; |
| |
| &hdmitx { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_default>; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| rt1711h@4e { |
| compatible = "richtek,rt1711h"; |
| reg = <0x4e>; |
| gpios = <&pio 76 GPIO_ACTIVE_LOW>; |
| |
| /* port to connect with remote usb-role-switch endpoint */ |
| port { |
| usb_role: endpoint { |
| remote-endpoint = <&tcpc_drd_switch>; |
| }; |
| }; |
| |
| usb_con: connector { |
| compatible = "usb-c-connector"; |
| label = "USB-C"; |
| power-role = "sink"; |
| data-role = "dual"; |
| sink-pdos = <PDO_FIXED(5000, 900, PDO_FIXED_USB_COMM)>; |
| op-sink-microwatt = <4500000>; |
| no-vconn = "true"; |
| no-send-disc = "true"; |
| send-initial-get-src-cap = "true"; |
| initial-get-src-cap-delay-ms = <200>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* port@0 for USB2 */ |
| port@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| mt6395: mt6395@62 { |
| compatible = "mediatek,mt6395-regulator"; |
| mt6395,irq-gpios = <&pio 4 0x0>; |
| reg = <0x62>; |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmic_pins_eint>; |
| }; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| ina231: ina231@40 { |
| compatible = "ti,ina231"; |
| reg = <0x40>; |
| shunt-resistor = <10000>; |
| }; |
| }; |
| |
| &irrx { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&irrx_pins_ir_input>; |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| status = "okay"; |
| pinctrl-names = "default", "state_uhs"; |
| pinctrl-0 = <&mmc0_pins_default>; |
| pinctrl-1 = <&mmc0_pins_uhs>; |
| bus-width = <8>; |
| max-frequency = <200000000>; |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| mmc-hs400-1_8v; |
| supports-cqe; |
| hs400-ds-delay = <0x13014>; |
| vmmc-supply = <&mmc_fixed_3v3>; |
| vqmmc-supply = <&mmc_fixed_1v8_io>; |
| non-removable; |
| no-sd; |
| no-sdio; |
| }; |
| |
| &mmc2 { |
| status = "okay"; |
| pinctrl-names = "default", "state_uhs", "state_eint", |
| "state_dat1", "state_low"; |
| pinctrl-0 = <&mmc2_pins_default>; |
| pinctrl-1 = <&mmc2_pins_uhs>; |
| pinctrl-2 = <&mmc2_pins_eint>; |
| pinctrl-3 = <&mmc2_pins_dat1>; |
| pinctrl-4 = <&mmc2_pins_low>; |
| eint-gpios = <&pio 44 0>; |
| bus-width = <4>; |
| max-frequency = <200000000>; |
| cap-sd-highspeed; |
| /*sd-uhs-ddr208;*/ |
| sd-uhs-sdr104; |
| sd-uhs-sdr50; |
| sd-uhs-sdr25; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| cap-sdio-irq; |
| cap-sdio-async-int; |
| no-mmc; |
| no-sd; |
| non-removable; |
| vmmc-supply = <&mmc2_fixed_pwr>; |
| vqmmc-supply = <&mmc2_fixed_pmu>; |
| }; |
| |
| &pio { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pins_default>; |
| |
| eth_pins_default: eth-default-pins { |
| tx-pins { |
| pinmux = <PINMUX_GPIO133__FUNC_GBE_TXD3>, |
| <PINMUX_GPIO134__FUNC_GBE_TXD2>, |
| <PINMUX_GPIO135__FUNC_GBE_TXD1>, |
| <PINMUX_GPIO136__FUNC_GBE_TXD0>, |
| <PINMUX_GPIO137__FUNC_GBE_TXC>, |
| <PINMUX_GPIO138__FUNC_GBE_TXEN>; |
| drive-strength = <MTK_DRIVE_8mA>; |
| }; |
| rx-pins { |
| pinmux = <PINMUX_GPIO139__FUNC_GBE_RXD3>, |
| <PINMUX_GPIO140__FUNC_GBE_RXD2>, |
| <PINMUX_GPIO141__FUNC_GBE_RXD1>, |
| <PINMUX_GPIO142__FUNC_GBE_RXD0>, |
| <PINMUX_GPIO143__FUNC_GBE_RXDV>, |
| <PINMUX_GPIO145__FUNC_GBE_RXC>; |
| drive-strength = <MTK_DRIVE_8mA>; |
| }; |
| mdio-pins { |
| pinmux = <PINMUX_GPIO146__FUNC_GBE_MDC>, |
| <PINMUX_GPIO147__FUNC_GBE_MDIO>; |
| drive-strength = <MTK_DRIVE_8mA>; |
| input-enable; |
| }; |
| phy-rstb { |
| pinmux = <PINMUX_GPIO29__FUNC_GPIO29>; |
| output-high; |
| }; |
| gbe-vio33-en { |
| pinmux = <PINMUX_GPIO150__FUNC_GPIO150>; |
| output-high; |
| }; |
| }; |
| |
| eth_pins_sleep: eth-sleep-pins { |
| tx-pins { |
| pinmux = <PINMUX_GPIO133__FUNC_GPIO133>, |
| <PINMUX_GPIO134__FUNC_GPIO134>, |
| <PINMUX_GPIO135__FUNC_GPIO135>, |
| <PINMUX_GPIO136__FUNC_GPIO136>, |
| <PINMUX_GPIO137__FUNC_GPIO137>, |
| <PINMUX_GPIO138__FUNC_GPIO138>; |
| }; |
| rx-pins { |
| pinmux = <PINMUX_GPIO139__FUNC_GPIO139>, |
| <PINMUX_GPIO140__FUNC_GPIO140>, |
| <PINMUX_GPIO141__FUNC_GPIO141>, |
| <PINMUX_GPIO142__FUNC_GPIO142>, |
| <PINMUX_GPIO143__FUNC_GPIO143>, |
| <PINMUX_GPIO145__FUNC_GPIO145>; |
| }; |
| mdio-pins { |
| pinmux = <PINMUX_GPIO146__FUNC_GPIO146>, |
| <PINMUX_GPIO147__FUNC_GPIO147>; |
| input-disable; |
| bias-disable; |
| }; |
| }; |
| |
| hdmi_default: hdmi { |
| hdmi_cec { |
| pinmux = <PINMUX_GPIO110__FUNC_HDMITX20_CEC>; |
| bias-disable; |
| }; |
| hdmi_pins { |
| pinmux = <PINMUX_GPIO112__FUNC_HDMITX20_SCL>, |
| <PINMUX_GPIO113__FUNC_HDMITX20_SDA>; |
| bias-disable; |
| }; |
| hdmi_hotplug { |
| pinmux = <PINMUX_GPIO111__FUNC_HDMITX20_HTPLG>; |
| bias-pull-down; |
| }; |
| hdmi_5vctl { |
| pinmux = <PINMUX_GPIO2__FUNC_GPIO2>; |
| }; |
| }; |
| |
| irrx_pins_ir_input: irrx_pin_ir { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO63__FUNC_IR_IN>; |
| bias-disable; |
| }; |
| }; |
| |
| mmc0_pins_default: mmc0default { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO56__FUNC_MSDC0_DAT0>, |
| <PINMUX_GPIO55__FUNC_MSDC0_DAT1>, |
| <PINMUX_GPIO54__FUNC_MSDC0_DAT2>, |
| <PINMUX_GPIO53__FUNC_MSDC0_DAT3>, |
| <PINMUX_GPIO52__FUNC_MSDC0_DAT4>, |
| <PINMUX_GPIO51__FUNC_MSDC0_DAT5>, |
| <PINMUX_GPIO50__FUNC_MSDC0_DAT6>, |
| <PINMUX_GPIO49__FUNC_MSDC0_DAT7>, |
| <PINMUX_GPIO57__FUNC_MSDC0_CMD>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins_clk { |
| pinmux = <PINMUX_GPIO48__FUNC_MSDC0_CLK>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins_rst { |
| pinmux = <PINMUX_GPIO58__FUNC_MSDC0_RSTB>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc0_pins_uhs: mmc0 { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO56__FUNC_MSDC0_DAT0>, |
| <PINMUX_GPIO55__FUNC_MSDC0_DAT1>, |
| <PINMUX_GPIO54__FUNC_MSDC0_DAT2>, |
| <PINMUX_GPIO53__FUNC_MSDC0_DAT3>, |
| <PINMUX_GPIO52__FUNC_MSDC0_DAT4>, |
| <PINMUX_GPIO51__FUNC_MSDC0_DAT5>, |
| <PINMUX_GPIO50__FUNC_MSDC0_DAT6>, |
| <PINMUX_GPIO49__FUNC_MSDC0_DAT7>, |
| <PINMUX_GPIO57__FUNC_MSDC0_CMD>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins_clk { |
| pinmux = <PINMUX_GPIO48__FUNC_MSDC0_CLK>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins_ds { |
| pinmux = <PINMUX_GPIO47__FUNC_MSDC0_DSL>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins_rst { |
| pinmux = <PINMUX_GPIO58__FUNC_MSDC0_RSTB>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_pins_default: mmc2default { |
| pins_clk { |
| pinmux = <PINMUX_GPIO40__FUNC_MSDC2_CLK>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO45__FUNC_MSDC2_DAT0>, |
| <PINMUX_GPIO44__FUNC_MSDC2_DAT1>, |
| <PINMUX_GPIO43__FUNC_MSDC2_DAT2>, |
| <PINMUX_GPIO42__FUNC_MSDC2_DAT3>, |
| <PINMUX_GPIO46__FUNC_MSDC2_CMD>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_4mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_pins_uhs: mmc2 { |
| pins_clk { |
| pinmux = <PINMUX_GPIO40__FUNC_MSDC2_CLK>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO45__FUNC_MSDC2_DAT0>, |
| <PINMUX_GPIO44__FUNC_MSDC2_DAT1>, |
| <PINMUX_GPIO43__FUNC_MSDC2_DAT2>, |
| <PINMUX_GPIO42__FUNC_MSDC2_DAT3>, |
| <PINMUX_GPIO46__FUNC_MSDC2_CMD>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_4mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins_ds { |
| pinmux = <PINMUX_GPIO41__FUNC_MSDC2_DSL>; |
| drive-strength = <MTK_DRIVE_4mA>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| }; |
| |
| mmc2_pins_eint: dat1_eint { |
| pins_dat1 { |
| pinmux = <PINMUX_GPIO44__FUNC_GPIO44>; |
| input-enable; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_pins_dat1: sdio_dat1 { |
| pins_dat1 { |
| pinmux = <PINMUX_GPIO44__FUNC_MSDC2_DAT1>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_4mA>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_pins_low: sdio_low { |
| pins_low { |
| pinmux = <PINMUX_GPIO45__FUNC_GPIO45>, |
| <PINMUX_GPIO43__FUNC_GPIO43>, |
| <PINMUX_GPIO42__FUNC_GPIO42>, |
| <PINMUX_GPIO46__FUNC_GPIO46>, |
| <PINMUX_GPIO41__FUNC_GPIO41>; |
| input-disable; |
| bias-disable; |
| }; |
| }; |
| |
| pmic_pins_eint: pmic_pins_eint{ |
| pmic_pins { |
| pinmux = <PINMUX_GPIO4__FUNC_GPIO4>; |
| bias-disable; |
| }; |
| }; |
| |
| spi2_pins: spi2_pins { |
| pins_spi { |
| pinmux = <PINMUX_GPIO156__FUNC_SPI_CS>, |
| <PINMUX_GPIO151__FUNC_SPI_CK>, |
| <PINMUX_GPIO155__FUNC_SPI_IO0>, |
| <PINMUX_GPIO153__FUNC_SPI_IO1>, |
| <PINMUX_GPIO154__FUNC_SPI_IO2>, |
| <PINMUX_GPIO152__FUNC_SPI_IO3>; |
| bias-disable; |
| }; |
| }; |
| |
| pinctrl_pins_default: gpios-default { |
| pins-chgaln { |
| pinmux = <PINMUX_GPIO92__FUNC_GPIO92>; |
| input-enable; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins-swopen { |
| pinmux = <PINMUX_GPIO93__FUNC_GPIO93>; |
| input-enable; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins-chgdet { |
| pinmux = <PINMUX_GPIO94__FUNC_GPIO94>; |
| input-enable; |
| }; |
| |
| pins-rt1716intr { |
| pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; |
| input-enable; |
| bias-pull-up; |
| }; |
| }; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| }; |
| |
| &pio { |
| gpio_keys_default: gpiodefault { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO97__FUNC_GPIO97>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| input-enable; |
| }; |
| }; |
| }; |
| |
| &pwm1 { |
| status = "okay"; |
| }; |
| |
| &spi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_pins>; |
| status = "okay"; |
| |
| spidev: spi@0 { |
| compatible = "mediatek,spi-mt65xx-test"; |
| reg = <0>; |
| spi-max-frequency = <2000000>; |
| cs-setup-ns = <90>; |
| }; |
| }; |
| |
| &extcon_kirkwood_usb { |
| fsa831a,good-bat-fixed; |
| usb-role-switch; |
| |
| chg-aln-gpio = <&pio 92 0>; |
| chgaln-gpio-pin = <92>; |
| chgaln-polarity = <1>; |
| |
| sw-open-gpio = <&pio 93 0>; |
| swopen-gpio-pin = <93>; |
| swopen-polarity = <1>; |
| |
| chg-det-gpio = <&pio 94 0>; |
| chgdet-gpio-pin = <94>; |
| chgdet-polarity = <1>; |
| |
| android,usb-hal-ver = <0x13>; |
| |
| status = "okay"; |
| |
| port { |
| tcpc_drd_switch: endpoint { |
| remote-endpoint = <&usb_role>; |
| }; |
| }; |
| }; |
| |
| &ssusb { |
| vusb33-supply = <&usb_vbus_3v3>; |
| vbus-supply = <&usb_vbus_5v0>; |
| mediatek,force-vbus; |
| /* valid string: "host", "peripheral", "otg" */ |
| dr_mode = "otg"; |
| |
| /*usb3-lpm-capable;*/ |
| /* wakeup-source; */ |
| maximum-speed = "high-speed"; |
| u3-should-port = <0>; |
| mediatek,clk-mgr; |
| /* TYPE-C: Both Host and Device are used as USB 2.0 */ |
| extcon = <&extcon_kirkwood_usb>; |
| y-cable = "2"; |
| usb-extconn = "2"; |
| |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |
| |
| &usb_host0 { |
| vusb33-supply = <&usb_vbus_3v3>; |
| vbus-supply = <&usb_vbus_5v0>; |
| status = "okay"; |
| }; |
| |
| &u2port0 { |
| mediatek,discth = <0xf>; |
| mediatek,rev6 = <0x2>; |
| mediatek,eye-vrt = <0x5>; |
| mediatek,eye-term = <0x5>; |
| mediatek,eye-src = <0x4>; |
| status = "okay"; |
| }; |
| |
| &thermal_zones { |
| soc_max { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <200>; /* milliseconds */ |
| thermal-sensors = <&thermal 255>; |
| |
| trips { |
| core_soc_trip0: trip-point@0 { |
| temperature = <95000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| core_soc_trip1: target@1 { |
| temperature = <97000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| core_soc_trip2: target@2 { |
| temperature = <99000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| core_soc_trip3: target@3 { |
| temperature = <101000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| core_soc_critical: soc-max-crit@0 { |
| temperature = <105000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&core_soc_trip0>; |
| cooling-device = <&cpu0 3 3>; |
| }; |
| map1 { |
| trip = <&core_soc_trip1>; |
| cooling-device = <&cpu0 4 6>; |
| }; |
| map2 { |
| trip = <&core_soc_trip2>; |
| cooling-device = <&cpu0 7 9>; |
| }; |
| map3 { |
| trip = <&core_soc_trip3>; |
| cooling-device = <&cpu0 10 15>; |
| }; |
| map4 { |
| trip = <&core_soc_trip1>; |
| cooling-device = <&clovelly 1 1>; |
| }; |
| map5 { |
| trip = <&core_soc_trip2>; |
| cooling-device = <&clovelly 2 2>; |
| }; |
| map6 { |
| trip = <&core_soc_trip3>; |
| cooling-device = <&clovelly 3 3>; |
| }; |
| }; |
| }; |
| |
| cpu-little0 { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <1000>; /* milliseconds */ |
| thermal-sensors = <&thermal 0>; |
| trips { |
| cpu_little0_crit: cpu-little0-crit@0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| MFG-TEMP { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <1000>; /* milliseconds */ |
| thermal-sensors = <&thermal 1>; |
| trips { |
| mfg_crit: mfg-crit@0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| }; |
| |
| MMSYS-TEMP { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <1000>; /* milliseconds */ |
| thermal-sensors = <&thermal 2>; |
| trips { |
| mmsys_crit: mmsys-crit@0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-little1 { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <1000>; /* milliseconds */ |
| thermal-sensors = <&thermal 3>; |
| trips { |
| cpu_little1_crit: cpu-little1-crit@0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-little2 { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <1000>; /* milliseconds */ |
| thermal-sensors = <&thermal 4>; |
| trips { |
| cpu_little2_crit: cpu-little2-crit@0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-little3 { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <1000>; /* milliseconds */ |
| thermal-sensors = <&thermal 5>; |
| trips { |
| cpu_little3_crit: cpu-little3-crit@0 { |
| temperature = <105000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| board_ddr: board_ddr { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <100>; /* milliseconds */ |
| thermal-sensors = <&ntc_ddr>; |
| trips { |
| board_ddr_trip0: trip-point@0 { |
| temperature = <75200>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_ddr_trip1: trip-point@1 { |
| temperature = <75400>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_ddr_trip2: trip-point@2 { |
| temperature = <75600>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_ddr_trip3: trip-point@3 { |
| temperature = <75800>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_ddr_critical: trip-point@4 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| cpufreq_cooling_map0 { |
| trip = <&board_ddr_trip0>; |
| cooling-device = <&cpu0 3 3>; |
| }; |
| cpufreq_cooling_map1 { |
| trip = <&board_ddr_trip1>; |
| cooling-device = <&cpu0 4 6>; |
| }; |
| cpufreq_cooling_map2 { |
| trip = <&board_ddr_trip2>; |
| cooling-device = <&cpu0 7 9>; |
| }; |
| cpufreq_cooling_map3 { |
| trip = <&board_ddr_trip3>; |
| cooling-device = <&cpu0 10 15>; |
| }; |
| gpufreq_cooling_map0 { |
| trip = <&board_ddr_trip1>; |
| cooling-device = <&clovelly 1 1>; |
| }; |
| gpufreq_cooling_map1 { |
| trip = <&board_ddr_trip2>; |
| cooling-device = <&clovelly 2 2>; |
| }; |
| gpufreq_cooling_map2 { |
| trip = <&board_ddr_trip3>; |
| cooling-device = <&clovelly 3 3>; |
| }; |
| }; |
| }; |
| |
| board_wifi: board_wifi { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <100>; /* milliseconds */ |
| thermal-sensors = <&ntc_wifi>; |
| trips { |
| board_wifi_trip0: trip-point@0 { |
| temperature = <69200>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_wifi_trip1: trip-point@1 { |
| temperature = <69400>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_wifi_trip2: trip-point@2 { |
| temperature = <69600>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_wifi_trip3: trip-point@3 { |
| temperature = <69800>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_wifi_critical: trip-point@4 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| cpufreq_cooling_map0 { |
| trip = <&board_wifi_trip0>; |
| cooling-device = <&cpu0 3 3>; |
| }; |
| cpufreq_cooling_map1 { |
| trip = <&board_wifi_trip1>; |
| cooling-device = <&cpu0 4 6>; |
| }; |
| cpufreq_cooling_map2 { |
| trip = <&board_wifi_trip2>; |
| cooling-device = <&cpu0 7 9>; |
| }; |
| cpufreq_cooling_map3 { |
| trip = <&board_wifi_trip3>; |
| cooling-device = <&cpu0 10 15>; |
| }; |
| gpufreq_cooling_map0 { |
| trip = <&board_wifi_trip1>; |
| cooling-device = <&clovelly 1 1>; |
| }; |
| gpufreq_cooling_map1 { |
| trip = <&board_wifi_trip2>; |
| cooling-device = <&clovelly 2 2>; |
| }; |
| gpufreq_cooling_map2 { |
| trip = <&board_wifi_trip3>; |
| cooling-device = <&clovelly 3 3>; |
| }; |
| }; |
| }; |
| |
| board_soc_bottom: board_soc_bottom { |
| polling-delay = <1000>; /* milliseconds */ |
| polling-delay-passive = <100>; /* milliseconds */ |
| thermal-sensors = <&ntc_soc_bottom>; |
| trips { |
| board_soc_bottom_trip0: trip-point@0 { |
| temperature = <74200>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_soc_bottom_trip1: trip-point@1 { |
| temperature = <74400>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_soc_bottom_trip2: trip-point@2 { |
| temperature = <74600>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_soc_bottom_trip3: trip-point@3 { |
| temperature = <74800>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| board_soc_bottom_critical: trip-point@4 { |
| temperature = <85000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| cpufreq_cooling_map0 { |
| trip = <&board_soc_bottom_trip0>; |
| cooling-device = <&cpu0 3 3>; |
| }; |
| cpufreq_cooling_map1 { |
| trip = <&board_soc_bottom_trip1>; |
| cooling-device = <&cpu0 4 6>; |
| }; |
| cpufreq_cooling_map2 { |
| trip = <&board_soc_bottom_trip2>; |
| cooling-device = <&cpu0 7 9>; |
| }; |
| cpufreq_cooling_map3 { |
| trip = <&board_soc_bottom_trip3>; |
| cooling-device = <&cpu0 10 15>; |
| }; |
| gpufreq_cooling_map0 { |
| trip = <&board_soc_bottom_trip1>; |
| cooling-device = <&clovelly 1 1>; |
| }; |
| gpufreq_cooling_map1 { |
| trip = <&board_soc_bottom_trip2>; |
| cooling-device = <&clovelly 2 2>; |
| }; |
| gpufreq_cooling_map2 { |
| trip = <&board_soc_bottom_trip3>; |
| cooling-device = <&clovelly 3 3>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwmleds { |
| yellow_led { |
| pwms = <&pwm1 1 12300>; |
| pwm-names = "pwm1"; |
| }; |
| white_led { |
| pwms = <&pwm1 0 12300>; |
| pwm-names = "pwm0"; |
| }; |
| }; |
| |
| #include "mediatek/mt6395.dtsi" |
