| This is a introduction for flashlight chip MT6336 | |
| [Scope] | |
| - Two channel for two LEDs | |
| [Hardware Interface] | |
| - I2C | |
| * For general control | |
| * Slave address 0x55, 0x56, 0x57, 0x58 | |
| [Limit] | |
| - Channel couple: | |
| * Flash/Torch enable | |
| * Flash/Torch LED current source | |
| * Flash mode watchdog timer | |
| * Torch mode watchdog timer | |
| * Flash/Torch timeout | |
| * Flash mode step up/down timing (default: 10 us) | |
| * Flash mode output regulation voltage (default: 5.0 V) | |
| - Channel decouple: | |
| * Flash/Torch mode enable | |
| * Brightness level | |
| - Torch Mode | |
| * Step current: 12.5 mA | |
| * Min currnet: 12.5 mA | |
| * Max current: 200 mA | |
| - Flash Mode | |
| * Step current: 12.5 mA | |
| * Min currnet: 12.5 mA | |
| * Max current: 1500 mA | |
| * Max current for two channel: 2500 mA | |
| * Min protected timeout: 200 ms | |
| * Max protected timeout: 800 ms | |