| This is a introduction for flashlight chip RT5081 | |
| [Scope] | |
| - Two channel for two LEDs | |
| [Hardware Interface] | |
| - I2C | |
| * For general control | |
| * Slave address 0x34 | |
| [Limit] | |
| - Channel couple: | |
| * Torch/Strobe mode | |
| * Strobe mode watchdog timer | |
| - Channel decouple: | |
| * Current source | |
| * Brightness level | |
| - Torch Mode | |
| * Step current: 12.5 mA | |
| * Min currnet: 25 mA | |
| * Max current: 400 mA | |
| - Strobe Mode | |
| * Step current: 12.5 mA | |
| * Min currnet: 25 mA | |
| * Max current: 1500 mA | |
| * Max current for two channel: 2500 mA | |
| * Min protected timeout: 64 ms | |
| * Max protected timeout: 2432 ms | |