drivers/power/supply/Kconfig

# SPDX-License-Identifier: GPL-2.0-only

config MTK_CHARGER
	tristate "MediaTek Charging Driver"
	depends on MTK_USB_TYPEC
	help
	  Say yes here to enable MediaTek charging driver.
	  This driver contains charging control flow and
	  maintains charging status.
	  Say no if not using MediaTek charging driver.

config MTK_PUMP_EXPRESS_PLUS_SUPPORT
	tristate "MediaTek PUMP EXPRESS PLUS"
	depends on MTK_CHARGER
	help
	  Fast charging technology using switch charger and current pattern
	  to achive better charging ability.
	  Set Yes to enable PE+
	  Set No to disable PE+

config MTK_PUMP_EXPRESS_PLUS_20_SUPPORT
	tristate "MediaTek PUMP EXPRESS PLUS 2.0"
	depends on MTK_CHARGER
	help
	  Fast charging technology using switch charger and current pattern
	  to achive better charging ability. It has higher charging efficiency
	  and has better thermal performance than PE+.
	  Set Yes to enable PE+2.0
	  Set No to disable PE+2.0

config MTK_PUMP_EXPRESS_40_SUPPORT
	tristate "MediaTek PUMP EXPRESS 4.0"
	depends on MTK_CHARGER
	help
	  Fast charging technology supports request adjustments of source output
	  voltage in increments as small as 50 mV to achive better charging ability.
	  It has higher charging efficiency and has better thermal performance than
	  PE+/PE+2.0.
	  Set Yes to enable PE 4.0
	  Set No to disable PE 4.0

config MTK_PUMP_EXPRESS_50_SUPPORT
	tristate "MediaTek PUMP EXPRESS 5.0"
	depends on MTK_CHARGER
	help
	  Fast charging technology using divider charger
	  to achive better charging ability. It has higher charging efficiency
	  and has better thermal performance than PE+.
	  Set Yes to enable PE 5.0
	  Set No to disable PE 5.0

config MTK_PUMP_EXPRESS_50_PLUS_SUPPORT
	tristate "MediaTek PUMP EXPRESS 5.0 PLUS"
	depends on MTK_CHARGER
	help
	  Fast charging technology using divider charger
	  to achive better charging ability. It has higher charging efficiency
	  and has better thermal performance than PE+.
	  Set Yes to enable PE 5.0 PLUS
	  Set No to disable PE 5.0 PLUS

config MTK_HVBP_SUPPORT
	tristate "MediaTek High Voltage Bypass Charging"
	depends on MTK_CHARGER
	help
	  Fast charging technology using high voltage direct charger
	  to achive better charging ability. It has higher charging efficiency
	  and has better thermal performance than PE+.
	  Set Yes to enable HVBP charging
	  Set No to disable HVBP charging

config CHARGER_RT9759
	tristate "Charger Driver for Richtek RT9759 Charger IC"
	default n
	depends on MTK_CHARGER
	help
	  Say Yes to enable Richtek RT9759 driver.
	  It is mainly used as cap divider charger
	  for Mediatek Pump Express 5.0.
	  It depends on config MTK_CHARGER

config CHARGER_RT9490
	tristate "Richtek RT9490 charger support"
	depends on MFD_RT9490
	depends on MTK_CHARGER
	help
	  Say Y here to enable support for Richtek RT9490 charger.
	  Richtek RT9490 is a buck-boost switch type charger, and can support
	  1-4 cell battery with up to 5A charging current.
	  Say N to disable.

config CHARGER_RT9758
	tristate "Richtek RT9758 HV DV2 charger support"
	depends on I2C
	depends on MTK_CHARGER
	select REGMAP_I2C
	select LINEAR_RANGES
	help
	  Say Y here to enable support for Richtek RT9758 HV DV2 charger.
	  RT9758 is a high efficiency, and high charge current charger for
	  high voltage application. The maximum charge current is up to 5A.
	  Say N to disable.

config BATTERY_MT6359P
	tristate "MT6359P fuel gauge support"
	depends on DEVICE_MODULES_MFD_MT6397
	default m
	help
	  Say Y to enable support for MT6359P battery driver.
	  it measure battery current and temperature to provide
	  battery information , It issues interrupt when trigger
	  threshold is met.

config DEVICE_MODULES_CHARGER_MT6360
	tristate "Mediatek MT6360 Charger Driver"
	depends on DEVICE_MODULES_MFD_MT6360
	depends on MTK_USB_TYPEC
	depends on REGULATOR
	select LINEAR_RANGES
	help
	  Say Y here to enable MT6360 Charger Part.
	  The device supports High-Accuracy Voltage/Current Regulation,
	  Average Input Current Regulation, Battery Temperature Sensing,
	  Over-Temperature Protection, DPDM Detection for BC1.2.

config CHARGER_MT6362
	tristate "MT6362 SPMI CHG driver"
	depends on MFD_MT6362
	help
	  Say yes here to have support for the MT6362 CHG
	  It supports BC1.2 and OTG boost.
	  The driver can also be build as a module.
	  If so, the module will be called mt6362_chg

config CHARGER_MT6375
	tristate "MT6375 charger driver"
	depends on MFD_MT6375
	depends on MTK_CHARGER
	help
	  Say Y to enable support for the MT6375 charger.
	  The driver supports controlling switching charger and OTG
	  with high-accuracy current and voltage regulation.
	  The device is compliant with the USB Battery Charging Specification
	  Revision 1.2.

config GAUGE_MT6375
	tristate "MT6375 fuel gauge driver"
	depends on MFD_MT6375
	help
	  Say Y to enable support for the MT6375 gauge.
	  This adds support for battery fuel gauge in Mediatek MT6375 PMIC.
	  The fuelgauge calculates and determines the battery state of charge
	  according to battery open circuit voltage.

config MTK_CHARGER_TYPE_DETECT
	tristate "Mediatek Charger Type Detect Driver"
	depends on TCPC_CLASS
	help
	  Say Y here to enable Mediatek Charger Type Detect.
	  Support enable charger type detect when receiving
	  typec attach notify.
	  Say N to disable.