| # SPDX-License-Identifier: GPL-2.0-only |
| |
| config DEVICE_MODULES_REGULATOR_MT6315 |
| tristate "MediaTek MT6315 PMIC" |
| depends on SPMI |
| select REGMAP_SPMI |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6315 PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| config REGULATOR_MT6359P |
| tristate "MediaTek MT6359P PMIC" |
| depends on DEVICE_MODULES_MFD_MT6397 |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6359P PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| config DEVICE_MODULES_REGULATOR_MT6360 |
| tristate "MT6360 SubPMIC Regulator" |
| depends on DEVICE_MODULES_MFD_MT6360 |
| help |
| Say Y here to enable MT6360 regulator support. |
| This is support MT6360 PMIC/LDO part include |
| 2-channel buck with Thermal Shutdown and Overload Protection |
| 6-channel High PSRR and Low Dropout LDO. |
| |
| config REGULATOR_MT6362 |
| tristate "MT6362 SPMI Regulator driver" |
| depends on MFD_MT6362 |
| help |
| Say yes here to have support for the MT6362 Regulator |
| Include six BUCKs and seven LDOs. |
| |
| The driver can also be build as a module. |
| If so, the module will be called mt6362_regulator |
| |
| config REGULATOR_MT6363 |
| tristate "MT6363 SPMI Regulator driver" |
| depends on MFD_MTK_SPMI_PMIC |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6363 PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| The driver can also be build as a module. |
| If so, the module will be called mt6363_regulator |
| |
| config REGULATOR_MT6368 |
| tristate "MT6368 SPMI Regulator driver" |
| depends on MFD_MTK_SPMI_PMIC |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6368 PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| The driver can also be build as a module. |
| If so, the module will be called mt6368_regulator |
| |
| config REGULATOR_MT6369 |
| tristate "MT6369 SPMI Regulator driver" |
| depends on MFD_MTK_SPMI_PMIC |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6369 PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| The driver can also be build as a module. |
| If so, the module will be called mt6369_regulator |
| |
| config REGULATOR_MT6373 |
| tristate "MT6373 SPMI Regulator driver" |
| depends on MFD_MTK_SPMI_PMIC |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6373 PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| The driver can also be build as a module. |
| If so, the module will be called mt6373_regulator |
| |
| config REGULATOR_MT6395 |
| tristate "MediaTek MT6395 PMIC" |
| depends on MTK_PMIC_WRAP |
| help |
| Say y here to select this option to enable the power regulator of |
| MediaTek MT6380 PMIC. |
| This driver supports the control of different power rails of device |
| through regulator interface. |
| |
| config DEVICE_MODULES_REGULATOR_MTK_DVFSRC |
| tristate "MediaTek DVFSRC regulator driver" |
| depends on MTK_DVFSRC |
| help |
| Say y here to control regulator by DVFSRC (dynamic voltage |
| and frequency scaling resource collector). |
| This driver supports to control regulators via the DVFSRC |
| of Mediatek. It allows for voting on regulator state |
| between multiple users. |
| |
| config REGULATOR_MTK_VMM_ISP71 |
| tristate "MediaTek ISPDVFS regulator driver" |
| depends on MTK_CCU_RPROC |
| help |
| Say y here to control regulator by ISPDVFS (dynamic voltage |
| and frequency scaling resource collector). |
| This driver supports to control regulators via the ISPDVFS |
| of Mediatek. It allows for voting on regulator state |
| between multiple users. |
| |
| config REGULATOR_RT5738 |
| tristate "Richtek RT5738 Regulators" |
| depends on I2C |
| select REGMAP_I2C |
| help |
| This driver supports RT5738 voltage regulator. |
| The chip supports 3A output current. |
| The operation mode and output voltage is configurable |
| via I2C bus. |
| |
| config REGULATOR_RT5133 |
| tristate "Richtek RT5133 regulator driver" |
| depends on I2C && GPIOLIB |
| select REGMAP |
| select CRC8 |
| select OF_GPIO |
| select REGULATOR_FIXED_VOLTAGE |
| select MTK_SUBPMIC_MISC |
| help |
| RT5133 is an integrated chip. It includes 8 LDOs and 3 GPIOs that |
| can be used to drive output high/low purpose. The dependency of the |
| GPIO block is internally LDO1 voltage. If LDO1 voltage output disabled, |
| GPIO cannot be used to drive output high. It need to pay more |
| attention on the usage. |
| |
| config DEVICE_MODULES_REGULATOR_RT6160 |
| tristate "Richtek RT6160 BuckBoost voltage regulator" |
| depends on I2C |
| select REGMAP_I2C |
| help |
| This adds support for voltage regulator in Richtek RT6160. |
| This device automatically change voltage output mode from |
| Buck or Boost. The mode transition depend on the input source voltage. |
| The wide output range is from 2025mV to 5200mV and can be used on most |
| common application scenario. |
