blob: e617415368d72a52af6432de7951bca743ee199c [file] [edit]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2019 MediaTek Inc.
*/
#ifndef _UFS_MEDIATEK_H
#define _UFS_MEDIATEK_H
#include <linux/bitops.h>
#include <linux/pm_qos.h>
#ifdef CONFIG_UFSFEATURE
#include "ufshcd.h"
#include "ufsfeature.h"
#endif
/*
* Vendor specific UFSHCI Registers
*/
#define REG_UFS_XOUFS_CTRL 0x140
#define REG_UFS_REFCLK_CTRL 0x144
#define REG_UFS_EXTREG 0x2100
#define REG_UFS_MPHYCTRL 0x2200
#define REG_UFS_MTK_IP_VER 0x2240
#define REG_UFS_REJECT_MON 0x22AC
#define REG_UFS_DEBUG_SEL 0x22C0
#define REG_UFS_PROBE 0x22C8
#define REG_UFS_DEBUG_SEL_B0 0x22D0
#define REG_UFS_DEBUG_SEL_B1 0x22D4
#define REG_UFS_DEBUG_SEL_B2 0x22D8
#define REG_UFS_DEBUG_SEL_B3 0x22DC
/*
* Ref-clk control
*
* Values for register REG_UFS_REFCLK_CTRL
*/
#define REFCLK_RELEASE 0x0
#define REFCLK_REQUEST BIT(0)
#define REFCLK_ACK BIT(1)
#define REFCLK_REQ_TIMEOUT_US 3000
/*
* Other attributes
*/
#define VS_DEBUGCLOCKENABLE 0xD0A1
#define VS_SAVEPOWERCONTROL 0xD0A6
#define VS_UNIPROPOWERDOWNCONTROL 0xD0A8
/*
* Vendor specific link state
*/
enum {
VS_LINK_DISABLED = 0,
VS_LINK_DOWN = 1,
VS_LINK_UP = 2,
VS_LINK_HIBERN8 = 3,
VS_LINK_LOST = 4,
VS_LINK_CFG = 5,
};
/*
* Vendor specific host controller state
*/
enum {
VS_HCE_RESET = 0,
VS_HCE_BASE = 1,
VS_HCE_OOCPR_WAIT = 2,
VS_HCE_DME_RESET = 3,
VS_HCE_MIDDLE = 4,
VS_HCE_DME_ENABLE = 5,
VS_HCE_DEFAULTS = 6,
VS_HIB_IDLEEN = 7,
VS_HIB_ENTER = 8,
VS_HIB_ENTER_CONF = 9,
VS_HIB_MIDDLE = 10,
VS_HIB_WAITTIMER = 11,
VS_HIB_EXIT_CONF = 12,
VS_HIB_EXIT = 13,
};
/*
* VS_DEBUGCLOCKENABLE
*/
enum {
TX_SYMBOL_CLK_REQ_FORCE = 5,
};
/*
* VS_SAVEPOWERCONTROL
*/
enum {
RX_SYMBOL_CLK_GATE_EN = 0,
SYS_CLK_GATE_EN = 2,
TX_CLK_GATE_EN = 3,
};
/*
* Host capability
*/
enum ufs_mtk_host_caps {
UFS_MTK_CAP_BOOST_CRYPT_ENGINE = 1 << 0,
UFS_MTK_CAP_VA09_PWR_CTRL = 1 << 1,
UFS_MTK_CAP_DISABLE_AH8 = 1 << 2,
UFS_MTK_CAP_BROKEN_VCC = 1 << 3,
/* Override UFS_MTK_CAP_BROKEN_VCC's behavior to
* allow vccqx upstream to enter LPM
*/
UFS_MTK_CAP_FORCE_VSx_LPM = 1 << 5,
UFS_MTK_CAP_PMC_VIA_FASTAUTO = 1 << 6,
};
struct ufs_mtk_crypt_cfg {
struct regulator *reg_vcore;
struct clk *clk_crypt_perf;
struct clk *clk_crypt_mux;
struct clk *clk_crypt_lp;
int vcore_volt;
};
struct ufs_mtk_clk {
struct ufs_clk_info *ufs_sel_clki; // mux
struct ufs_clk_info *ufs_sel_max_clki; // max src
struct ufs_clk_info *ufs_sel_min_clki; // min src
};
struct ufs_mtk_hw_ver {
u8 step;
u8 minor;
u8 major;
};
struct ufs_mtk_host {
struct phy *mphy;
struct regulator *reg_va09;
struct reset_control *hci_reset;
struct reset_control *unipro_reset;
struct reset_control *crypto_reset;
struct ufs_hba *hba;
struct ufs_mtk_crypt_cfg *crypt;
struct ufs_mtk_hw_ver hw_ver;
enum ufs_mtk_host_caps caps;
bool mphy_powered_on;
bool unipro_lpm;
bool ref_clk_enabled;
u16 ref_clk_ungating_wait_us;
u16 ref_clk_gating_wait_us;
u32 ip_ver;
struct ufs_mtk_clk mclk;
bool pm_qos_init;
struct pm_qos_request pm_qos_req;
bool qos_allowed;
bool qos_enabled;
bool boot_device;
struct semaphore rpmb_sem;
#if defined(CONFIG_UFSFEATURE)
struct ufsf_feature ufsf;
#endif
};
/*
* IOCTL opcode for ufs queries has the following opcode after
* SCSI_IOCTL_GET_PCI
*/
#define UFS_IOCTL_QUERY 0x5388
/**
* struct ufs_ioctl_query_data - used to transfer data to and from user via
* ioctl
* @opcode: type of data to query (descriptor/attribute/flag)
* @idn: id of the data structure
* @buf_size: number of allocated bytes/data size on return
* @buffer: data location
*
* Received: buffer and buf_size (available space for transferred data)
* Submitted: opcode, idn, length, buf_size
*/
struct ufs_ioctl_query_data {
/*
* User should select one of the opcode defined in "enum query_opcode".
* Please check include/uapi/scsi/ufs/ufs.h for the definition of it.
* Note that only UPIU_QUERY_OPCODE_READ_DESC,
* UPIU_QUERY_OPCODE_READ_ATTR & UPIU_QUERY_OPCODE_READ_FLAG are
* supported as of now. All other query_opcode would be considered
* invalid.
* As of now only read query operations are supported.
*/
__u32 opcode;
/*
* User should select one of the idn from "enum flag_idn" or "enum
* attr_idn" or "enum desc_idn" based on whether opcode above is
* attribute, flag or descriptor.
* Please check include/uapi/scsi/ufs/ufs.h for the definition of it.
*/
__u8 idn;
/*
* User should specify the size of the buffer (buffer[0] below) where
* it wants to read the query data (attribute/flag/descriptor).
* As we might end up reading less data then what is specified in
* buf_size. So we are updating buf_size to what exactly we have read.
*/
__u16 buf_size;
/*
* placeholder for the start of the data buffer where kernel will copy
* the query data (attribute/flag/descriptor) read from the UFS device
* Note:
* For Read/Write Attribute you will have to allocate 4 bytes
* For Read/Write Flag you will have to allocate 1 byte
*/
__u8 buffer[0];
};
enum {
BOOTDEV_SDMMC = 1,
BOOTDEV_UFS = 2
};
struct tag_bootmode {
u32 size;
u32 tag;
u32 bootmode;
u32 boottype;
};
#if IS_ENABLED(CONFIG_RPMB)
struct rpmb_dev *ufs_mtk_rpmb_get_raw_dev(void);
#endif
#if defined(CONFIG_UFSFEATURE)
static inline struct ufsf_feature *ufs_mtk_get_ufsf(struct ufs_hba *hba)
{
struct ufs_mtk_host *host = ufshcd_get_variant(hba);
return &host->ufsf;
}
#endif
#endif /* !_UFS_MEDIATEK_H */