blob: adf9d933dbc465ada61ed2addb2bdb509f0111d2 [file] [log] [blame]
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am mdate-sh \
$(srcdir)/version.texi $(srcdir)/stamp-vti texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \
$(top_srcdir)/m4/ax_append_flag.m4 \
$(top_srcdir)/m4/ax_check_compile_flag.m4 \
$(top_srcdir)/m4/ax_check_link_flag.m4 \
$(top_srcdir)/m4/ax_check_openssl.m4 \
$(top_srcdir)/m4/ax_count_cpus.m4 \
$(top_srcdir)/m4/ax_have_epoll.m4 \
$(top_srcdir)/m4/ax_pthread.m4 \
$(top_srcdir)/m4/ax_require_defined.m4 \
$(top_srcdir)/m4/libcurl.m4 $(top_srcdir)/m4/libgcrypt.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/MHD_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo " DVIPS " $@;
am__v_DVIPS_1 =
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
am__v_MAKEINFO_1 =
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo " INFOHTML" $@;
am__v_INFOHTML_1 =
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
am__v_TEXI2DVI_1 =
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
am__v_TEXI2PDF_1 =
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 =
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 =
INFO_DEPS = $(srcdir)/libmicrohttpd.info \
$(srcdir)/libmicrohttpd-tutorial.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = libmicrohttpd.dvi libmicrohttpd-tutorial.dvi
PDFS = libmicrohttpd.pdf libmicrohttpd-tutorial.pdf
PSS = libmicrohttpd.ps libmicrohttpd-tutorial.ps
HTMLS = libmicrohttpd.html libmicrohttpd-tutorial.html
TEXINFOS = libmicrohttpd.texi libmicrohttpd-tutorial.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man3dir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man3dir = $(mandir)/man3
NROFF = nroff
MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_COUNT = @CPU_COUNT@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
GNUTLS_CPPFLAGS = @GNUTLS_CPPFLAGS@
GNUTLS_LDFLAGS = @GNUTLS_LDFLAGS@
GNUTLS_LIBS = @GNUTLS_LIBS@
GREP = @GREP@
HAVE_CURL_BINARY = @HAVE_CURL_BINARY@
HAVE_MAKEINFO_BINARY = @HAVE_MAKEINFO_BINARY@
HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBCURL = @LIBCURL@
LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSPDY_VERSION_AGE = @LIBSPDY_VERSION_AGE@
LIBSPDY_VERSION_CURRENT = @LIBSPDY_VERSION_CURRENT@
LIBSPDY_VERSION_REVISION = @LIBSPDY_VERSION_REVISION@
LIBTOOL = @LIBTOOL@
LIB_VERSION_AGE = @LIB_VERSION_AGE@
LIB_VERSION_CURRENT = @LIB_VERSION_CURRENT@
LIB_VERSION_REVISION = @LIB_VERSION_REVISION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MHD_LIBDEPS = @MHD_LIBDEPS@
MHD_LIBDEPS_PKGCFG = @MHD_LIBDEPS_PKGCFG@
MHD_LIB_CFLAGS = @MHD_LIB_CFLAGS@
MHD_LIB_CPPFLAGS = @MHD_LIB_CPPFLAGS@
MHD_LIB_LDFLAGS = @MHD_LIB_LDFLAGS@
MHD_REQ_PRIVATE = @MHD_REQ_PRIVATE@
MKDIR_P = @MKDIR_P@
MS_LIB_TOOL = @MS_LIB_TOOL@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPENSSL_INCLUDES = @OPENSSL_INCLUDES@
OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@
OPENSSL_LIBS = @OPENSSL_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
PACKAGE_VERSION_SUBMINOR = @PACKAGE_VERSION_SUBMINOR@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
RC = @RC@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPDY_LIBDEPS = @SPDY_LIBDEPS@
SPDY_LIB_CFLAGS = @SPDY_LIB_CFLAGS@
SPDY_LIB_CPPFLAGS = @SPDY_LIB_CPPFLAGS@
SPDY_LIB_LDFLAGS = @SPDY_LIB_LDFLAGS@
STRIP = @STRIP@
VERSION = @VERSION@
_libcurl_config = @_libcurl_config@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
have_socat = @have_socat@
have_zzuf = @have_zzuf@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_cv_objdir = @lt_cv_objdir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# This Makefile.am is in the public domain
man_MANS = libmicrohttpd.3
SUBDIRS = . examples doxygen
DISTCLEANFILES = \
libmicrohttpd.cps \
libmicrohttpd.dvi \
libmicrohttpd-tutorial.cps \
libmicrohttpd-tutorial.dvi
info_TEXINFOS = \
libmicrohttpd.texi \
libmicrohttpd-tutorial.texi
microhttpd_TEXINFOS = \
chapters/basicauthentication.inc \
chapters/bibliography.inc \
chapters/exploringrequests.inc \
chapters/hellobrowser.inc \
chapters/introduction.inc \
chapters/largerpost.inc \
chapters/processingpost.inc \
chapters/responseheaders.inc \
chapters/tlsauthentication.inc \
chapters/sessions.inc \
fdl-1.3.texi \
lgpl.texi \
ecos.texi
EXTRA_DIST = $(man_MANS) $(microhttpd_TEXINFOS) performance_data.png performance_data.eps
all: all-recursive
.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
.texi.info:
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
$<
.texi.pdf:
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
$<
.texi.html:
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
$(srcdir)/libmicrohttpd.info: libmicrohttpd.texi $(srcdir)/version.texi
libmicrohttpd.dvi: libmicrohttpd.texi $(srcdir)/version.texi
libmicrohttpd.pdf: libmicrohttpd.texi $(srcdir)/version.texi
libmicrohttpd.html: libmicrohttpd.texi $(srcdir)/version.texi
$(srcdir)/version.texi: $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: libmicrohttpd.texi $(top_srcdir)/configure
@(dir=.; test -f ./libmicrohttpd.texi || dir=$(srcdir); \
set `$(SHELL) $(srcdir)/mdate-sh $$dir/libmicrohttpd.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp
@cmp -s vti.tmp $(srcdir)/version.texi \
|| (echo "Updating $(srcdir)/version.texi"; \
cp vti.tmp $(srcdir)/version.texi)
-@rm -f vti.tmp
@cp $(srcdir)/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp
maintainer-clean-vti:
-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
$(srcdir)/libmicrohttpd-tutorial.info: libmicrohttpd-tutorial.texi
libmicrohttpd-tutorial.dvi: libmicrohttpd-tutorial.texi
libmicrohttpd-tutorial.pdf: libmicrohttpd-tutorial.texi
libmicrohttpd-tutorial.html: libmicrohttpd-tutorial.texi
.dvi.ps:
$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) $(AM_V_texinfo) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf libmicrohttpd.t2d libmicrohttpd.t2p libmicrohttpd-tutorial.t2d \
libmicrohttpd-tutorial.t2p
clean-aminfo:
-test -z "libmicrohttpd.dvi libmicrohttpd.pdf libmicrohttpd.ps \
libmicrohttpd.html libmicrohttpd-tutorial.dvi \
libmicrohttpd-tutorial.pdf libmicrohttpd-tutorial.ps \
libmicrohttpd-tutorial.html" \
|| rm -rf libmicrohttpd.dvi libmicrohttpd.pdf libmicrohttpd.ps \
libmicrohttpd.html libmicrohttpd-tutorial.dvi \
libmicrohttpd-tutorial.pdf libmicrohttpd-tutorial.ps \
libmicrohttpd-tutorial.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
install-man3: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man3dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.3[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
done; }
uninstall-man3:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man3dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.3[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man3dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am: $(DVIS)
html: html-recursive
html-am: $(HTMLS)
info: info-recursive
info-am: $(INFO_DEPS)
install-data-am: install-info-am install-man
install-dvi: install-dvi-recursive
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am:
install-html: install-html-recursive
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man: install-man3
install-pdf: install-pdf-recursive
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
mostlyclean-libtool mostlyclean-vti
pdf: pdf-recursive
pdf-am: $(PDFS)
ps: ps-recursive
ps-am: $(PSS)
uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-man uninstall-pdf-am uninstall-ps-am
uninstall-man: uninstall-man3
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
check-am clean clean-aminfo clean-generic clean-libtool \
cscopelist-am ctags ctags-am dist-info distclean \
distclean-generic distclean-libtool distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-man3 \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti mostlyclean \
mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \
mostlyclean-vti pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-dvi-am uninstall-html-am \
uninstall-info-am uninstall-man uninstall-man3 \
uninstall-pdf-am uninstall-ps-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: