| # Makefile.in generated by automake 1.11.6 from Makefile.am. |
| # Makefile. Generated from Makefile.in by configure. |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software |
| # Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| |
| |
| |
| am__make_dryrun = \ |
| { \ |
| am__dry=no; \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ |
| | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ |
| *) \ |
| for am__flg in $$MAKEFLAGS; do \ |
| case $$am__flg in \ |
| *=*|--*) ;; \ |
| *n*) am__dry=yes; break;; \ |
| esac; \ |
| done;; \ |
| esac; \ |
| test $$am__dry = yes; \ |
| } |
| pkgdatadir = $(datadir)/libnetfilter_queue |
| pkgincludedir = $(includedir)/libnetfilter_queue |
| pkglibdir = $(libdir)/libnetfilter_queue |
| pkglibexecdir = $(libexecdir)/libnetfilter_queue |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = x86_64-unknown-linux-gnu |
| host_triplet = x86_64-unknown-linux-gnu |
| subdir = . |
| DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/config.h.in \ |
| $(srcdir)/doxygen.cfg.in $(srcdir)/libnetfilter_queue.pc.in \ |
| $(top_srcdir)/configure COPYING build-aux/compile \ |
| build-aux/config.guess build-aux/config.sub build-aux/depcomp \ |
| build-aux/install-sh build-aux/ltmain.sh build-aux/missing \ |
| config.guess config.sub depcomp install-sh ltmain.sh missing |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/gcc4_visibility.m4 \ |
| $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ |
| $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ |
| $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = libnetfilter_queue.pc doxygen.cfg |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_GEN = $(am__v_GEN_$(V)) |
| am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) |
| am__v_GEN_0 = @echo " GEN " $@; |
| AM_V_at = $(am__v_at_$(V)) |
| am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) |
| am__v_at_0 = @ |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(pkgconfigdir)" |
| DATA = $(pkgconfig_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ |
| $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ |
| distdir dist dist-all distcheck |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| GZIP_ENV = --best |
| DIST_ARCHIVES = $(distdir).tar.bz2 |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = ${SHELL} /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue/build-aux/missing --run aclocal-1.11 |
| AMTAR = $${TAR-tar} |
| AM_DEFAULT_VERBOSITY = 0 |
| AR = ar |
| AUTOCONF = ${SHELL} /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue/build-aux/missing --run autoconf |
| AUTOHEADER = ${SHELL} /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue/build-aux/missing --run autoheader |
| AUTOMAKE = ${SHELL} /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue/build-aux/missing --run automake-1.11 |
| AWK = gawk |
| CC = gcc |
| CCDEPMODE = depmode=gcc3 |
| CFLAGS = -g -O2 |
| CPP = gcc -E |
| CPPFLAGS = |
| CYGPATH_W = echo |
| DEFS = -DHAVE_CONFIG_H |
| DEPDIR = .deps |
| DLLTOOL = false |
| DSYMUTIL = |
| DUMPBIN = |
| ECHO_C = |
| ECHO_N = -n |
| ECHO_T = |
| EGREP = /bin/grep -E |
| EXEEXT = |
| FGREP = /bin/grep -F |
| GCC_FVISIBILITY_HIDDEN = -fvisibility=hidden |
| GREP = /bin/grep |
| INSTALL = /usr/bin/install -c |
| INSTALL_DATA = ${INSTALL} -m 644 |
| INSTALL_PROGRAM = ${INSTALL} |
| INSTALL_SCRIPT = ${INSTALL} |
| INSTALL_STRIP_PROGRAM = $(install_sh) -c -s |
| LD = /usr/bin/ld -m elf_x86_64 |
| LDFLAGS = |
| LIBMNL_CFLAGS = |
| LIBMNL_LIBS = -lmnl |
| LIBNFNETLINK_CFLAGS = ../libnfnetlink |
| LIBNFNETLINK_LIBS = libnfnetlink |
| LIBOBJS = |
| LIBS = |
| LIBTOOL = $(SHELL) $(top_builddir)/libtool |
| LIPO = |
| LN_S = ln -s |
| LTLIBOBJS = |
| MAKEINFO = ${SHELL} /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue/build-aux/missing --run makeinfo |
| MANIFEST_TOOL = : |
| MKDIR_P = /bin/mkdir -p |
| NM = /usr/bin/nm -B |
| NMEDIT = |
| OBJDUMP = objdump |
| OBJEXT = o |
| OTOOL = |
| OTOOL64 = |
| PACKAGE = libnetfilter_queue |
| PACKAGE_BUGREPORT = |
| PACKAGE_NAME = libnetfilter_queue |
| PACKAGE_STRING = libnetfilter_queue 1.0.2 |
| PACKAGE_TARNAME = libnetfilter_queue |
| PACKAGE_URL = |
| PACKAGE_VERSION = 1.0.2 |
| PATH_SEPARATOR = : |
| PKG_CONFIG = /usr/bin/pkg-config |
| PKG_CONFIG_LIBDIR = |
| PKG_CONFIG_PATH = |
| RANLIB = ranlib |
| SED = /bin/sed |
| SET_MAKE = |
| SHELL = /bin/sh |
| STRIP = strip |
| VERSION = 1.0.2 |
| abs_builddir = /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue |
| abs_srcdir = /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue |
| abs_top_builddir = /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue |
| abs_top_srcdir = /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue |
| ac_ct_AR = ar |
| ac_ct_CC = gcc |
| ac_ct_DUMPBIN = |
| am__include = include |
| am__leading_dot = . |
| am__quote = |
| am__tar = tar --format=posix -chf - "$$tardir" |
| am__untar = tar -xf - |
| bindir = ${exec_prefix}/bin |
| build = x86_64-unknown-linux-gnu |
| build_alias = |
| build_cpu = x86_64 |
| build_os = linux-gnu |
| build_vendor = unknown |
| builddir = . |
| datadir = ${datarootdir} |
| datarootdir = ${prefix}/share |
| docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} |
| dvidir = ${docdir} |
| exec_prefix = ${prefix} |
| host = x86_64-unknown-linux-gnu |
| host_alias = |
| host_cpu = x86_64 |
| host_os = linux-gnu |
| host_vendor = unknown |
| htmldir = ${docdir} |
| includedir = ${prefix}/include |
| infodir = ${datarootdir}/info |
| install_sh = ${SHELL} /usr/local/google/home/xdsun/work/eureka_1210/external/libnetfilter_queue/build-aux/install-sh |
| libdir = ${exec_prefix}/lib |
| libexecdir = ${exec_prefix}/libexec |
| localedir = ${datarootdir}/locale |
| localstatedir = ${prefix}/var |
| mandir = ${datarootdir}/man |
| mkdir_p = /bin/mkdir -p |
| oldincludedir = /usr/include |
| pdfdir = ${docdir} |
| prefix = /usr/local |
| program_transform_name = s,x,x, |
| psdir = ${docdir} |
| sbindir = ${exec_prefix}/sbin |
| sharedstatedir = ${prefix}/com |
| srcdir = . |
| sysconfdir = ${prefix}/etc |
| target_alias = |
| top_build_prefix = |
| top_builddir = . |
| top_srcdir = . |
| ACLOCAL_AMFLAGS = -I m4 |
| EXTRA_DIST = $(man_MANS) include/linux Make_global.am |
| SUBDIRS = src utils include examples |
| man_MANS = #nfnetlink_queue.3 nfnetlink_queue.7 |
| pkgconfigdir = $(libdir)/pkgconfig |
| pkgconfig_DATA = libnetfilter_queue.pc |
| all: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @if test ! -f $@; then rm -f stamp-h1; else :; fi |
| @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| libnetfilter_queue.pc: $(top_builddir)/config.status $(srcdir)/libnetfilter_queue.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| doxygen.cfg: $(top_builddir)/config.status $(srcdir)/doxygen.cfg.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-pkgconfigDATA: $(pkgconfig_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
| done |
| |
| uninstall-pkgconfigDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__remove_distdir) |
| |
| dist-lzma: distdir |
| tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma |
| $(am__remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__remove_distdir) |
| |
| dist-tarZ: distdir |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__remove_distdir) |
| |
| dist-shar: distdir |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lzma*) \ |
| lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir); chmod u+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(DATA) config.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-pkgconfigDATA |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-pkgconfigDATA |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ |
| ctags-recursive install-am install-strip tags-recursive |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am am--refresh check check-am clean clean-generic \ |
| clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ |
| dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \ |
| dist-zip distcheck distclean distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags distcleancheck distdir \ |
| distuninstallcheck dvi dvi-am html html-am info info-am \ |
| install install-am install-data install-data-am install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-pkgconfigDATA install-ps \ |
| install-ps-am install-strip installcheck installcheck-am \ |
| installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ |
| uninstall uninstall-am uninstall-pkgconfigDATA |
| |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |