| /** @file mlan_hostcmd_ids.h |
| * |
| * @brief This file contains host command ID definitions. |
| * |
| * |
| * Copyright 2023-2024 NXP |
| * |
| * NXP CONFIDENTIAL |
| * The source code contained or described herein and all documents related to |
| * the source code (Materials) are owned by NXP, its |
| * suppliers and/or its licensors. Title to the Materials remains with NXP, |
| * its suppliers and/or its licensors. The Materials contain |
| * trade secrets and proprietary and confidential information of NXP, its |
| * suppliers and/or its licensors. The Materials are protected by worldwide |
| * copyright and trade secret laws and treaty provisions. No part of the |
| * Materials may be used, copied, reproduced, modified, published, uploaded, |
| * posted, transmitted, distributed, or disclosed in any way without NXP's |
| * prior express written permission. |
| * |
| * No license under any patent, copyright, trade secret or other intellectual |
| * property right is granted to or conferred upon you by disclosure or delivery |
| * of the Materials, either expressly, by implication, inducement, estoppel or |
| * otherwise. Any license under such intellectual property rights must be |
| * express and approved by NXP in writing. |
| * |
| * Alternatively, this software may be distributed under the terms of GPL v2. |
| * SPDX-License-Identifier: GPL-2.0 |
| * |
| * |
| */ |
| |
| /* include guard is absent intentionally */ |
| |
| /** Firmware Host Command ID Constants */ |
| /** Host Command ID : Get hardware specifications */ |
| ENUM_ELEMENT(HostCmd_CMD_GET_HW_SPEC, 0x0003), |
| /** Host Command ID : 802.11 scan */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_SCAN, 0x0006), |
| /** Host Command ID : 802.11 get log */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_GET_LOG, 0x000b), |
| |
| /** Host Command id: GET_TX_RX_PKT_STATS */ |
| ENUM_ELEMENT(HostCmd_CMD_TX_RX_PKT_STATS, 0x008d), |
| |
| /** Host Command ID : 802.11 get/set link layer statistic */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_LINK_STATS, 0x0256), |
| |
| /** Host Command ID : MAC multicast address */ |
| ENUM_ELEMENT(HostCmd_CMD_MAC_MULTICAST_ADR, 0x0010), |
| /** Host Command ID : 802.11 EEPROM access */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_EEPROM_ACCESS, 0x0059), |
| /** Host Command ID : 802.11 associate */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_ASSOCIATE, 0x0012), |
| |
| /** Host Command ID : 802.11 SNMP MIB */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_SNMP_MIB, 0x0016), |
| /** Host Command ID : MAC register access */ |
| ENUM_ELEMENT(HostCmd_CMD_MAC_REG_ACCESS, 0x0019), |
| /** Host Command ID : BBP register access */ |
| ENUM_ELEMENT(HostCmd_CMD_BBP_REG_ACCESS, 0x001a), |
| /** Host Command ID : RF register access */ |
| ENUM_ELEMENT(HostCmd_CMD_RF_REG_ACCESS, 0x001b), |
| |
| /** Host Command ID : 802.11 radio control */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_RADIO_CONTROL, 0x001c), |
| /** Host Command ID : 802.11 RF channel */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_RF_CHANNEL, 0x001d), |
| /** Host Command ID : 802.11 RF Tx power */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_RF_TX_POWER, 0x001e), |
| |
| /** Host Command ID : 802.11 RF antenna */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_RF_ANTENNA, 0x0020), |
| |
| /** Host Command ID : 802.11 deauthenticate */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_DEAUTHENTICATE, 0x0024), |
| /** Host Command ID: 802.11 disassoicate */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_DISASSOCIATE, 0x0026), |
| /** Host Command ID : MAC control */ |
| ENUM_ELEMENT(HostCmd_CMD_MAC_CONTROL, 0x0028), |
| |
| /** Host Command ID : 802.11 key material */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_KEY_MATERIAL, 0x005e), |
| |
| /** Host Command ID : GPIO Configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_GPIO_CFG, 0x0041), |
| |
| /** Host Command ID : 802.22 MAC address */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_MAC_ADDRESS, 0x004D), |
| |
| /** Host Command ID : LED control config */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_LED_CONTROL, 0x004E), |
| |
| /** Host Command ID : WMM Traffic Stream Status */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_TS_STATUS, 0x005d), |
| |
| /** Host Command ID : 802.11 D domain information */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11D_DOMAIN_INFO, 0x005b), |
| |
| /*This command gets/sets the Transmit Rate-based Power Control (TRPC) |
| * channel configuration.*/ |
| ENUM_ELEMENT(HostCmd_CMD_CHANNEL_TRPC_CONFIG, 0x00fb), |
| |
| /** Host Command ID : 802.11 TPC information */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_TPC_INFO, 0x005f), |
| /** Host Command ID : 802.11 TPC adapt req */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_TPC_ADAPT_REQ, 0x0060), |
| /** Host Command ID : 802.11 channel SW ann */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_CHAN_SW_ANN, 0x0061), |
| |
| /** Host Command ID : Measurement request */ |
| ENUM_ELEMENT(HostCmd_CMD_MEASUREMENT_REQUEST, 0x0062), |
| /** Host Command ID : Measurement report */ |
| ENUM_ELEMENT(HostCmd_CMD_MEASUREMENT_REPORT, 0x0063), |
| |
| /** Host Command ID : 802.11 sleep parameters */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_SLEEP_PARAMS, 0x0066), |
| |
| /** Host Command ID : 802.11 ps inactivity timeout */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_PS_INACTIVITY_TIMEOUT, 0x0067), |
| |
| /** Host Command ID : 802.11 sleep period */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_SLEEP_PERIOD, 0x0068), |
| |
| /** Host Command ID: 802.11 BG scan config */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_BG_SCAN_CONFIG, 0x006b), |
| /** Host Command ID : 802.11 BG scan query */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_BG_SCAN_QUERY, 0x006c), |
| |
| /** Host Command ID : WMM ADDTS req */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_ADDTS_REQ, 0x006E), |
| /** Host Command ID : WMM DELTS req */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_DELTS_REQ, 0x006F), |
| /** Host Command ID : WMM queue configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_QUEUE_CONFIG, 0x0070), |
| /** Host Command ID : 802.11 get status */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_GET_STATUS, 0x0071), |
| |
| /** Host Command ID : 802.11 firmware wakeup method */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_FW_WAKE_METHOD, 0x0074), |
| /** Host Command ID : 802.11 subscribe event */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_SUBSCRIBE_EVENT, 0x0075), |
| |
| /** Host Command ID : 802.11 Tx rate query */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_TX_RATE_QUERY, 0x007f), |
| /** Host Command ID :Get timestamp value */ |
| ENUM_ELEMENT(HostCmd_CMD_GET_TSF, 0x0080), |
| |
| /** Host Command ID : WMM queue stats */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_QUEUE_STATS, 0x0081), |
| |
| /** Host Command ID : KEEP ALIVE command */ |
| ENUM_ELEMENT(HostCmd_CMD_AUTO_TX, 0x0082), |
| |
| /** Host Command ID : Memory access */ |
| ENUM_ELEMENT(HostCmd_CMD_MEM_ACCESS, 0x0086), |
| |
| #if defined(SDIO) |
| /** Host Command ID : SDIO GPIO interrupt configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_SDIO_GPIO_INT_CONFIG, 0x0088), |
| #endif |
| |
| /** Host Command ID : Mfg command */ |
| ENUM_ELEMENT(HostCmd_CMD_MFG_COMMAND, 0x0089), |
| /** Host Command ID : Inactivity timeout ext */ |
| ENUM_ELEMENT(HostCmd_CMD_INACTIVITY_TIMEOUT_EXT, 0x008a), |
| |
| /** Host Command ID : DBGS configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_DBGS_CFG, 0x008b), |
| /** Host Command ID : Get memory */ |
| ENUM_ELEMENT(HostCmd_CMD_GET_MEM, 0x008c), |
| |
| /** Host Command ID : Cal data dnld */ |
| ENUM_ELEMENT(HostCmd_CMD_CFG_DATA, 0x008f), |
| |
| /** Host Command ID : SDIO pull control */ |
| ENUM_ELEMENT(HostCmd_CMD_SDIO_PULL_CTRL, 0x0093), |
| |
| /** Host Command ID : ECL system clock configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_ECL_SYSTEM_CLOCK_CONFIG, 0x0094), |
| |
| /** Host Command ID : Extended version */ |
| ENUM_ELEMENT(HostCmd_CMD_VERSION_EXT, 0x0097), |
| |
| /** Host Command ID : MEF configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_MEF_CFG, 0x009a), |
| /** Host Command ID : 802.11 RSSI INFO*/ |
| ENUM_ELEMENT(HostCmd_CMD_RSSI_INFO, 0x00a4), |
| /** Host Command ID : Function initialization */ |
| ENUM_ELEMENT(HostCmd_CMD_FUNC_INIT, 0x00a9), |
| /** Host Command ID : Function shutdown */ |
| ENUM_ELEMENT(HostCmd_CMD_FUNC_SHUTDOWN, 0x00aa), |
| |
| #ifdef OPCHAN |
| ENUM_ELEMENT(HostCmd_CMD_OPCHAN_CONFIG, 0x00f8), |
| ENUM_ELEMENT(HostCmd_CMD_OPCHAN_CHANGROUP_CONFIG, 0x00f9), |
| #endif |
| |
| /** Host Command ID : Robustcoex */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_ROBUSTCOEX, 0x00e0), |
| |
| /** Host Command ID :EAPOL PKT */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_EAPOL_PKT, 0x012e), |
| |
| ENUM_ELEMENT(HostCmd_CMD_EDMAC_CFG, 0x0130), |
| |
| /** Host Command ID :MIMO SWITCH **/ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_MIMO_SWITCH, 0x0235), |
| |
| /** Host Command ID : 802.11 RSSI INFO EXT*/ |
| ENUM_ELEMENT(HostCmd_CMD_RSSI_INFO_EXT, 0x0237), |
| /** Host Command ID : ROAMING OFFLOAD TO FW*/ |
| ENUM_ELEMENT(HostCmd_CMD_ROAM_OFFLOAD, 0x0245), |
| |
| /** Host Command ID: Multi chan config */ |
| ENUM_ELEMENT(HostCmd_CMD_MULTI_CHAN_CONFIG, 0x011e), |
| /** Host Command ID: Multi chan policy */ |
| ENUM_ELEMENT(HostCmd_CMD_MULTI_CHAN_POLICY, 0x0121), |
| /** Host Command ID: DRCS config */ |
| ENUM_ELEMENT(HostCmd_CMD_DRCS_CONFIG, 0x024a), |
| |
| /** Host Command ID : Channel report request */ |
| ENUM_ELEMENT(HostCmd_CMD_CHAN_REPORT_REQUEST, 0x00dd), |
| |
| /** Host Command ID: SUPPLICANT_PMK */ |
| ENUM_ELEMENT(HostCmd_CMD_SUPPLICANT_PMK, 0x00c4), |
| /** Host Command ID: SUPPLICANT_PROFILE */ |
| ENUM_ELEMENT(HostCmd_CMD_SUPPLICANT_PROFILE, 0x00c5), |
| |
| /** Host Command ID : Add Block Ack Request */ |
| ENUM_ELEMENT(HostCmd_CMD_11N_ADDBA_REQ, 0x00ce), |
| /** Host Command ID : Delete a Block Ack Request */ |
| ENUM_ELEMENT(HostCmd_CMD_11N_CFG, 0x00cd), |
| /** Host Command ID : Add Block Ack Response */ |
| ENUM_ELEMENT(HostCmd_CMD_11N_ADDBA_RSP, 0x00cf), |
| /** Host Command ID : Delete a Block Ack Request */ |
| ENUM_ELEMENT(HostCmd_CMD_11N_DELBA, 0x00d0), |
| /** Host Command ID: Configure Tx Buf size */ |
| ENUM_ELEMENT(HostCmd_CMD_RECONFIGURE_TX_BUFF, 0x00d9), |
| /** Host Command ID: AMSDU Aggr Ctrl */ |
| ENUM_ELEMENT(HostCmd_CMD_AMSDU_AGGR_CTRL, 0x00df), |
| /** Host Command ID: 11AC config */ |
| ENUM_ELEMENT(HostCmd_CMD_11AC_CFG, 0x0112), |
| /** Host Command ID: Configure TX Beamforming capability */ |
| ENUM_ELEMENT(HostCmd_CMD_TX_BF_CFG, 0x0104), |
| |
| /** Host Command ID : 802.11 TX power configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_TXPWR_CFG, 0x00d1), |
| |
| /** Host Command ID : Soft Reset */ |
| ENUM_ELEMENT(HostCmd_CMD_SOFT_RESET, 0x00d5), |
| |
| /** Host Command ID : 802.11 b/g/n rate configration */ |
| ENUM_ELEMENT(HostCmd_CMD_TX_RATE_CFG, 0x00d6), |
| |
| /** Host Command ID : Enhanced PS mode */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_PS_MODE_ENH, 0x00e4), |
| |
| /** Host command action : Host sleep configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_HS_CFG_ENH, 0x00e5), |
| |
| /** Host Command ID : CAU register access */ |
| ENUM_ELEMENT(HostCmd_CMD_CAU_REG_ACCESS, 0x00ed), |
| |
| /** Host Command ID : mgmt IE list */ |
| ENUM_ELEMENT(HostCmd_CMD_MGMT_IE_LIST, 0x00f2), |
| |
| ENUM_ELEMENT(HostCmd_CMD_802_11_BAND_STEERING, 0x026f), |
| /*** Host Command ID " MC_AGGR_CFG */ |
| ENUM_ELEMENT(HostCmd_CMD_MC_AGGR_CFG, 0x027a), |
| ENUM_ELEMENT(HostCmd_CMD_802_11_STATS, 0x0014), |
| ENUM_ELEMENT(HostCmd_CMD_GET_CH_LOAD, 0x027b), |
| |
| /** Host Command ID: CROSS CHIP SYNCH */ |
| ENUM_ELEMENT(HostCmd_CMD_CROSS_CHIP_SYNCH, 0x027d), |
| |
| ENUM_ELEMENT(HostCmd_CMD_TSP_CFG, 0x0280), |
| |
| /** Host Command ID : TDLS configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_TDLS_CONFIG, 0x0100), |
| /** Host Command ID : TDLS operation */ |
| ENUM_ELEMENT(HostCmd_CMD_TDLS_OPERATION, 0x0122), |
| |
| /** Host Command ID : Packet aggregation over host interface */ |
| ENUM_ELEMENT(HostCmd_CMD_PACKET_AGGR_OVER_HOST_INTERFACE, 0x0117), |
| |
| #ifdef SDIO |
| /** Host Command ID : SDIO single port RX aggr */ |
| ENUM_ELEMENT(HostCmd_CMD_SDIO_SP_RX_AGGR_CFG, 0x0223), |
| #endif |
| |
| /** Host Command ID : Extended scan support */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_SCAN_EXT, 0x0107), |
| |
| /** Host Command ID : Forward mgmt frame */ |
| ENUM_ELEMENT(HostCmd_CMD_RX_MGMT_IND, 0x010c), |
| |
| #ifdef PCIE |
| /** Host Command ID: Host buffer description */ |
| ENUM_ELEMENT(HostCmd_CMD_PCIE_HOST_BUF_DETAILS, 0x00fa), |
| #endif |
| |
| /** Host Command ID : Set BSS_MODE */ |
| ENUM_ELEMENT(HostCmd_CMD_SET_BSS_MODE, 0x00f7), |
| |
| #ifdef UAP_SUPPORT |
| /** Host Command id: SYS_INFO */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_SYS_INFO, 0x00ae), |
| /** Host Command id: sys_reset */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_SYS_RESET, 0x00af), |
| /** Host Command id: SYS_CONFIGURE */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_SYS_CONFIGURE, 0x00b0), |
| /** Host Command id: BSS_START */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_BSS_START, 0x00b1), |
| /** Host Command id: BSS_STOP */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_BSS_STOP, 0x00b2), |
| /** Host Command id: sta_list */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_STA_LIST, 0x00b3), |
| /** Host Command id: STA_DEAUTH */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_STA_DEAUTH, 0x00b5), |
| |
| /** Host Command id: REPORT_MIC */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_REPORT_MIC, 0x00ee), |
| /** Host Command id: UAP_OPER_CTRL */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_OPER_CTRL, 0x0233), |
| #endif /* UAP_SUPPORT */ |
| |
| /** Host Command id: PMIC CONFIGURE*/ |
| ENUM_ELEMENT(HostCmd_CMD_PMIC_CONFIGURE, 0x23E), |
| |
| /** Host Command ID: 802.11 Network Monitor */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_NET_MONITOR, 0x0102), |
| |
| /** Host Command ID: Tx data pause */ |
| ENUM_ELEMENT(HostCmd_CMD_CFG_TX_DATA_PAUSE, 0x0103), |
| |
| #ifdef WIFI_DIRECT_SUPPORT |
| /** Host Command ID: P2P PARAMS CONFIG */ |
| ENUM_ELEMENT(HostCmd_CMD_P2P_PARAMS_CONFIG, 0x00ea), |
| /** Host Command ID: WIFI_DIRECT_MODE_CONFIG */ |
| ENUM_ELEMENT(HostCmd_CMD_WIFI_DIRECT_MODE_CONFIG, 0x00eb), |
| #endif |
| |
| /** Host Command ID: GPIO TSF LATCH */ |
| ENUM_ELEMENT(HostCmd_CMD_GPIO_TSF_LATCH_PARAM_CONFIG, 0x0278), |
| /** Host Command ID: Remain On Channel */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_REMAIN_ON_CHANNEL, 0x010d), |
| |
| ENUM_ELEMENT(HostCmd_CMD_COALESCE_CFG, 0x010a), |
| |
| /** Host Command ID: GTK REKEY OFFLOAD CFG */ |
| ENUM_ELEMENT(HostCmd_CMD_GTK_REKEY_OFFLOAD_CFG, 0x010f), |
| |
| /** Host Command ID : OTP user data */ |
| ENUM_ELEMENT(HostCmd_CMD_OTP_READ_USER_DATA, 0x0114), |
| |
| /** Host Command ID: fw auto reconnect */ |
| ENUM_ELEMENT(HostCmd_CMD_FW_AUTO_RECONNECT, 0x0115), |
| |
| /** Host Command ID: HS wakeup reason */ |
| ENUM_ELEMENT(HostCmd_CMD_HS_WAKEUP_REASON, 0x0116), |
| |
| /** Host Command ID: reject addba request */ |
| ENUM_ELEMENT(HostCmd_CMD_REJECT_ADDBA_REQ, 0x0119), |
| |
| ENUM_ELEMENT(HostCmd_CMD_FW_DUMP_EVENT, 0x0125), |
| |
| ENUM_ELEMENT(HostCmd_CMD_CONFIG_LOW_POWER_MODE, 0x0128), |
| |
| /** Host Command ID : Target device access */ |
| ENUM_ELEMENT(HostCmd_CMD_TARGET_ACCESS, 0x012a), |
| |
| /** Host Command ID: BCA device access */ |
| ENUM_ELEMENT(HostCmd_CMD_BCA_REG_ACCESS, 0x0272), |
| /** Host Command ID: register device access */ |
| ENUM_ELEMENT(HostCmd_CMD_REG_ACCESS, 0x027C), |
| |
| /** Host Command ID: DFS repeater mode */ |
| ENUM_ELEMENT(HostCmd_CMD_DFS_REPEATER_MODE, 0x012b), |
| |
| /** Host Command ID: ACS scan */ |
| ENUM_ELEMENT(HostCmd_CMD_APCMD_ACS_SCAN, 0x0224), |
| |
| /** Host Command ID: Get sensor temp*/ |
| ENUM_ELEMENT(HostCmd_CMD_DS_GET_SENSOR_TEMP, 0x0227), |
| |
| /** Host Command ID: NAN Parameters cofiguration */ |
| ENUM_ELEMENT(HostCmd_CMD_NAN_PARAMS_CONFIG, 0x0228), |
| /** Host Command ID: NAN mode cofiguration */ |
| ENUM_ELEMENT(HostCmd_CMD_NAN_MODE_CONFIG, 0x0229), |
| /** Host Command ID: NAN service discovery functionality */ |
| ENUM_ELEMENT(HostCmd_CMD_NAN_SDF, 0x022a), |
| /** Host Command ID: NAN service hash */ |
| ENUM_ELEMENT(HostCmd_CMD_NAN_SERVICE_HASH, 0x022b), |
| /** Host Command ID: NAN service state info (get/set) */ |
| ENUM_ELEMENT(HostCmd_CMD_NAN_STATE_INFO, 0x022c), |
| |
| /** Host Command ID : Configure ADHOC_OVER_IP parameters */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_PARAM_CONFIG, 0x023a), |
| |
| ENUM_ELEMENT(HostCmd_CMD_IPV6_RA_OFFLOAD_CFG, 0x0238), |
| |
| #ifdef STA_SUPPORT |
| /** Host Command ID : set/get sta configure */ |
| ENUM_ELEMENT(HostCmd_CMD_STA_CONFIGURE, 0x023f), |
| #endif |
| |
| /** Host Command ID : GPIO independent reset configure */ |
| ENUM_ELEMENT(HostCmd_CMD_INDEPENDENT_RESET_CFG, 0x0243), |
| |
| /** use to query chan region cfg setting in firmware */ |
| ENUM_ELEMENT(HostCmd_CMD_CHAN_REGION_CFG, 0x0242), |
| /** used in hostcmd to download region power cfg setting to firmware */ |
| ENUM_ELEMENT(HostCmd_CMD_REGION_POWER_CFG, 0x0249), |
| |
| /** Host Command ID : Packet aggregation CTRL */ |
| ENUM_ELEMENT(HostCmd_CMD_PACKET_AGGR_CTRL, 0x0251), |
| |
| ENUM_ELEMENT(HostCmd_CMD_DYN_BW, 0x0252), |
| |
| ENUM_ELEMENT(HostCmd_CMD_BOOT_SLEEP, 0x0258), |
| |
| ENUM_ELEMENT(HostCmd_CMD_RX_ABORT_CFG, 0x0261), |
| ENUM_ELEMENT(HostCmd_CMD_RX_ABORT_CFG_EXT, 0x0262), |
| ENUM_ELEMENT(HostCmd_CMD_TX_AMPDU_PROT_MODE, 0x0263), |
| ENUM_ELEMENT(HostCmd_CMD_RATE_ADAPT_CFG, 0x0264), |
| ENUM_ELEMENT(HostCmd_CMD_CCK_DESENSE_CFG, 0x0265), |
| |
| ENUM_ELEMENT(HostCmd_CMD_FTM_CONFIG_SESSION_PARAMS, 0x024d), |
| ENUM_ELEMENT(HostCmd_CMD_FTM_SESSION_CTRL, 0x024e), |
| ENUM_ELEMENT(HostCmd_CMD_FTM_FEATURE_CTRL, 0x024f), |
| ENUM_ELEMENT(HostCmd_CMD_WLS_REQ_FTM_RANGE, 0x0250), |
| |
| ENUM_ELEMENT(HostCmd_CMD_FTM_CONFIG_RESPONDER, 0x0255), |
| |
| ENUM_ELEMENT(HostCmd_CMD_VDLL, 0x0240), |
| #if defined(PCIE) |
| ENUM_ELEMENT(HostCmd_CMD_SSU, 0x0259), |
| #endif |
| ENUM_ELEMENT(HostCmd_CMD_CSI, 0x025b), |
| |
| #if defined(UAP_SUPPORT) |
| /** Host Command ID : Add New Station */ |
| ENUM_ELEMENT(HostCmd_CMD_ADD_NEW_STATION, 0x025f), |
| #endif |
| |
| ENUM_ELEMENT(HostCmd_CMD_DMCS_CONFIG, 0x0260), |
| |
| /** Host Command ID: 11AX config */ |
| ENUM_ELEMENT(HostCmd_CMD_11AX_CFG, 0x0266), |
| /** Host Command ID: 11AX command */ |
| ENUM_ELEMENT(HostCmd_CMD_11AX_CMD, 0x026d), |
| /** Host Command ID: Range ext command */ |
| ENUM_ELEMENT(HostCmd_CMD_RANGE_EXT, 0x0274), |
| /** Host Command ID: TWT cfg command */ |
| ENUM_ELEMENT(HostCmd_CMD_TWT_CFG, 0x0270), |
| |
| ENUM_ELEMENT(HostCmd_CMD_LOW_POWER_MODE_CFG, 0x026e), |
| ENUM_ELEMENT(HostCmd_CMD_UAP_BEACON_STUCK_CFG, 0x0271), |
| ENUM_ELEMENT(HostCmd_CMD_ARB_CONFIG, 0x0273), |
| ENUM_ELEMENT(HostCmd_CMD_DOT11MC_UNASSOC_FTM_CFG, 0x0275), |
| ENUM_ELEMENT(HostCmd_CMD_HAL_PHY_CFG, 0x0276), |
| |
| /** Host Command ID : IPS Config */ |
| ENUM_ELEMENT(HostCmd_CMD_IPS_CONFIG, 0x0279), |
| ENUM_ELEMENT(HostCmd_CMD_OFDM_DESENSE_CFG, 0x027f), |
| ENUM_ELEMENT(HostCmd_CMD_NAV_MITIGATION_CFG, 0x0282), |
| |
| /** Host Command ID: Tx Frame */ |
| ENUM_ELEMENT(HostCmd_CMD_802_11_TX_FRAME, 0x0283), |
| /** Host Command ID: PCIE ADMA INIT */ |
| ENUM_ELEMENT(HostCmd_CMD_PCIE_ADMA_INIT, 0x0284), |
| |
| /** Host Command ID: query of current TX rate to the peer */ |
| ENUM_ELEMENT(HostCmd_CMD_PEER_TX_RATE_QUERY, 0x0285), |
| |
| /** Host Command ID: multi-client TX scheduling configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_MCLIENT_SCHEDULE_CFG, 0x0286), |
| |
| /** Host Command ID : WMM HOST ADDTS req */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_HOST_ADDTS_REQ, 0x0287), |
| /** Host Command ID : WMM HOST DELTS req */ |
| ENUM_ELEMENT(HostCmd_CMD_WMM_HOST_DELTS_REQ, 0x0288), |
| |
| /** Host Command ID : Auth, Assoc timeout configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_AUTH_ASSOC_TIMEOUT_CFG, 0x0289), |
| |
| /** Host Command ID : HS Event masking configuration */ |
| ENUM_ELEMENT(HostCmd_CMD_HS_EVENT_MASK, 0x028a), |
| /* Always keep this last */ |
| ENUM_ELEMENT_LAST(__HostCmd_CMD_Last) |
