blob: e6cde8aa7ffff5c3a2b670e2584c7475a8419525 [file] [log] [blame]
/*
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "SchulerControl GmbH, SC SPS 1";
compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
hog_pins_a: hog-gpios@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a>;
bus-width = <4>;
status = "okay";
};
ssp2: ssp@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "everspin,mr25h256", "mr25h256";
spi-max-frequency = <40000000>;
reg = <0>;
};
};
};
apbx@80040000 {
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
clock-frequency = <400000>;
status = "okay";
rtc: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
eeprom: eeprom@52 {
compatible = "atmel,24c64";
reg = <0x52>;
pagesize = <32>;
};
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
usbphy0: usbphy@8007c000 {
status = "okay";
};
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
};
};
ahb@80080000 {
usb0: usb@80080000 {
vbus-supply = <&reg_usb0_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&usbphy0_pins_b>;
status = "okay";
};
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
status = "okay";
};
mac1: ethernet@800f4000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac1_pins_a>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_usb0_vbus: usb0_vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 9 0>;
};
};
leds {
#address-cells = <1>;
#size-cells = <0>;
compatible = "gpio-leds";
status = "okay";
led@1 {
label = "sps1-1:yellow:user";
gpios = <&gpio0 6 0>;
linux,default-trigger = "heartbeat";
reg = <0>;
};
led@2 {
label = "sps1-2:red:user";
gpios = <&gpio0 3 0>;
linux,default-trigger = "heartbeat";
reg = <1>;
};
led@3 {
label = "sps1-3:red:user";
gpios = <&gpio0 0 0>;
default-trigger = "heartbeat";
reg = <2>;
};
};
};