blob: 6bc8404bf6784cfee3751eed9e6fdd0f24b18152 [file] [log] [blame]
/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/dm9000.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
};
static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
.setup_gpio = s5pv210_ide_setup_gpio,
};
static uint32_t smdkv210_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
.keymap = smdkv210_keymap,
.keymap_size = ARRAY_SIZE(smdkv210_keymap),
};
static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
.keymap_data = &smdkv210_keymap_data,
.rows = 8,
.cols = 8,
};
static struct resource smdkv210_dm9000_resources[] = {
[0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1),
[1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1),
[2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct dm9000_plat_data smdkv210_dm9000_platdata = {
.flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
.dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
};
static struct platform_device smdkv210_dm9000 = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(smdkv210_dm9000_resources),
.resource = smdkv210_dm9000_resources,
.dev = {
.platform_data = &smdkv210_dm9000_platdata,
},
};
static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0");
gpio_free(S5PV210_GPD0(3));
#endif
/* fire nRESET on power up */
gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0");
gpio_set_value(S5PV210_GPH0(6), 0);
mdelay(10);
gpio_set_value(S5PV210_GPH0(6), 1);
mdelay(10);
gpio_free(S5PV210_GPH0(6));
} else {
#if !defined(CONFIG_BACKLIGHT_PWM)
gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0");
gpio_free(S5PV210_GPD0(3));
#endif
}
}
static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
.set_power = smdkv210_lte480wv_set_power,
};
static struct platform_device smdkv210_lcd_lte480wv = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &smdkv210_lcd_lte480wv_data,
};
static struct s3c_fb_pd_win smdkv210_fb_win0 = {
.max_bpp = 32,
.default_bpp = 24,
.xres = 800,
.yres = 480,
};
static struct fb_videomode smdkv210_lcd_timing = {
.left_margin = 13,
.right_margin = 8,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
.win[0] = &smdkv210_fb_win0,
.vtiming = &smdkv210_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
/* USB OTG */
static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_fb,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc_md,
&s5p_device_jpeg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5pv210_device_ac97,
&s5pv210_device_iis0,
&s5pv210_device_spdif,
&samsung_asoc_idma,
&samsung_device_keypad,
&smdkv210_dm9000,
&smdkv210_lcd_lte480wv,
};
static void __init smdkv210_dm9000_init(void)
{
unsigned int tmp;
gpio_request(S5PV210_MP01(5), "nCS5");
s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
gpio_free(S5PV210_MP01(5));
tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
__raw_writel(tmp, S5P_SROM_BC5);
tmp = __raw_readl(S5P_SROM_BW);
tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
__raw_writel(tmp, S5P_SROM_BW);
}
static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
{ I2C_BOARD_INFO("wm8580", 0x1b), },
};
static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
/* To Be Updated */
};
static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
/* To Be Updated */
};
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
.no = S5PV210_GPD0(3),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdkv210_bl_data = {
.pwm_id = 3,
.pwm_period_ns = 1000,
};
static void __init smdkv210_map_io(void)
{
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
static void __init smdkv210_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkv210_i2c_devs0,
ARRAY_SIZE(smdkv210_i2c_devs0));
i2c_register_board_info(1, smdkv210_i2c_devs1,
ARRAY_SIZE(smdkv210_i2c_devs1));
i2c_register_board_info(2, smdkv210_i2c_devs2,
ARRAY_SIZE(smdkv210_i2c_devs2));
s3c_ide_set_platdata(&smdkv210_ide_pdata);
s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
MACHINE_START(SMDKV210, "SMDKV210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.handle_irq = vic_handle_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
.timer = &s5p_timer,
.restart = s5pv210_restart,
.reserve = &smdkv210_reserve,
MACHINE_END