blob: 7e068d182c3ddbb8b0bd50f5b84e490742c296df [file] [log] [blame]
/* arch/arm/plat-samsung/include/plat/uncompress.h
*
* Copyright 2003, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_UNCOMPRESS_H
#define __ASM_PLAT_UNCOMPRESS_H
typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
/* uart setup */
unsigned int fifo_mask;
unsigned int fifo_max;
/* forward declerations */
static void arch_detect_cpu(void);
/* defines for UART registers */
#include <plat/regs-serial.h>
#include <plat/regs-watchdog.h>
/* working in physical space... */
#undef S3C2410_WDOGREG
#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
#ifdef S3C_PA_UART
#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
#endif
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
{
volatile unsigned int *ptr;
ptr = (volatile unsigned int *)(reg + uart_base);
*ptr = val;
}
static __inline__ unsigned int
uart_rd(unsigned int reg)
{
volatile unsigned int *ptr;
ptr = (volatile unsigned int *)(reg + uart_base);
return *ptr;
}
/* we can deal with the case the UARTs are being run
* in FIFO mode, so that we don't hold up our execution
* waiting for tx to happen...
*/
static void putc(int ch)
{
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
int level;
while (1) {
level = uart_rd(S3C2410_UFSTAT);
level &= fifo_mask;
if (level < fifo_max)
break;
}
} else {
/* not using fifos */
while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
barrier();
}
/* write byte to transmission register */
uart_wr(S3C2410_UTXH, ch);
}
static inline void flush(void)
{
}
#define __raw_writel(d, ad) \
do { \
*((volatile unsigned int __force *)(ad)) = (d); \
} while (0)
/* CONFIG_S3C_BOOT_WATCHDOG
*
* Simple boot-time watchdog setup, to reboot the system if there is
* any problem with the boot process
*/
#ifdef CONFIG_S3C_BOOT_WATCHDOG
#define WDOG_COUNT (0xff00)
static inline void arch_decomp_wdog(void)
{
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
}
static void arch_decomp_wdog_start(void)
{
__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
}
#else
#define arch_decomp_wdog_start()
#define arch_decomp_wdog()
#endif
#ifdef CONFIG_S3C_BOOT_ERROR_RESET
static void arch_decomp_error(const char *x)
{
putstr("\n\n");
putstr(x);
putstr("\n\n -- System resetting\n");
__raw_writel(0x4000, S3C2410_WTDAT);
__raw_writel(0x4000, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
while(1);
}
#define arch_error arch_decomp_error
#endif
#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
static inline void arch_enable_uart_fifo(void)
{
u32 fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
fifocon |= S3C2410_UFCON_RESETBOTH;
uart_wr(S3C2410_UFCON, fifocon);
/* wait for fifo reset to complete */
while (1) {
fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_RESETBOTH))
break;
}
}
}
#else
#define arch_enable_uart_fifo() do { } while(0)
#endif
static void
arch_decomp_setup(void)
{
/* we may need to setup the uart(s) here if we are not running
* on an BAST... the BAST will have left the uarts configured
* after calling linux.
*/
arch_detect_cpu();
arch_decomp_wdog_start();
/* Enable the UART FIFOs if they where not enabled and our
* configuration says we should turn them on.
*/
arch_enable_uart_fifo();
}
#endif /* __ASM_PLAT_UNCOMPRESS_H */