blob: 95fcd361322b06149ff0f7b95aa70ba08f6da181 [file] [log] [blame]
/*
* Copyright (c) 2012 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/sched.h>
#include <linux/ieee80211.h>
#include <linux/wireless.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include "wil6210.h"
/*
* Due to a hardware issue,
* one has to read/write to/from NIC in 32-bit chunks;
* regular memcpy_fromio and siblings will
* not work on 64-bit platform - it uses 64-bit transactions
*
* Force 32-bit transactions to enable NIC on 64-bit platforms
*
* To avoid byte swap on big endian host, __raw_{read|write}l
* should be used - {read|write}l would swap bytes to provide
* little endian on PCI value in host endianness.
*/
void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
size_t count)
{
u32 *d = dst;
const volatile u32 __iomem *s = src;
/* size_t is unsigned, if (count%4 != 0) it will wrap */
for (count += 4; count > 4; count -= 4)
*d++ = __raw_readl(s++);
}
void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
size_t count)
{
volatile u32 __iomem *d = dst;
const u32 *s = src;
for (count += 4; count > 4; count -= 4)
__raw_writel(*s++, d++);
}
static void _wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
{
uint i;
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
wil_dbg(wil, "%s()\n", __func__);
wil_link_off(wil);
clear_bit(wil_status_fwconnected, &wil->status);
switch (wdev->sme_state) {
case CFG80211_SME_CONNECTED:
cfg80211_disconnected(ndev, WLAN_STATUS_UNSPECIFIED_FAILURE,
NULL, 0, GFP_KERNEL);
break;
case CFG80211_SME_CONNECTING:
cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
GFP_KERNEL);
break;
default:
;
}
for (i = 0; i < ARRAY_SIZE(wil->vring_tx); i++)
wil_vring_fini_tx(wil, i);
}
static void wil_disconnect_worker(struct work_struct *work)
{
struct wil6210_priv *wil = container_of(work,
struct wil6210_priv, disconnect_worker);
_wil6210_disconnect(wil, NULL);
}
static void wil_connect_timer_fn(ulong x)
{
struct wil6210_priv *wil = (void *)x;
wil_dbg(wil, "Connect timeout\n");
/* reschedule to thread context - disconnect won't
* run from atomic context
*/
schedule_work(&wil->disconnect_worker);
}
int wil_priv_init(struct wil6210_priv *wil)
{
wil_dbg(wil, "%s()\n", __func__);
mutex_init(&wil->mutex);
mutex_init(&wil->wmi_mutex);
init_completion(&wil->wmi_ready);
wil->pending_connect_cid = -1;
setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker);
INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
INIT_LIST_HEAD(&wil->pending_wmi_ev);
spin_lock_init(&wil->wmi_ev_lock);
wil->wmi_wq = create_singlethread_workqueue(WIL_NAME"_wmi");
if (!wil->wmi_wq)
return -EAGAIN;
wil->wmi_wq_conn = create_singlethread_workqueue(WIL_NAME"_connect");
if (!wil->wmi_wq_conn) {
destroy_workqueue(wil->wmi_wq);
return -EAGAIN;
}
/* make shadow copy of registers that should not change on run time */
wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
sizeof(struct wil6210_mbox_ctl));
wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
return 0;
}
void wil6210_disconnect(struct wil6210_priv *wil, void *bssid)
{
del_timer_sync(&wil->connect_timer);
_wil6210_disconnect(wil, bssid);
}
void wil_priv_deinit(struct wil6210_priv *wil)
{
cancel_work_sync(&wil->disconnect_worker);
wil6210_disconnect(wil, NULL);
wmi_event_flush(wil);
destroy_workqueue(wil->wmi_wq_conn);
destroy_workqueue(wil->wmi_wq);
}
static void wil_target_reset(struct wil6210_priv *wil)
{
wil_dbg(wil, "Resetting...\n");
/* register write */
#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
/* register set = read, OR, write */
#define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \
wil->csr + HOSTADDR(a))
/* hpal_perst_from_pad_src_n_mask */
S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
/* car_perst_rst_src_n_mask */
S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7));
W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
msleep(100);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
msleep(100);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
msleep(2000);
W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */
msleep(2000);
wil_dbg(wil, "Reset completed\n");
#undef W
#undef S
}
void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
{
le32_to_cpus(&r->base);
le16_to_cpus(&r->entry_size);
le16_to_cpus(&r->size);
le32_to_cpus(&r->tail);
le32_to_cpus(&r->head);
}
static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
{
ulong to = msecs_to_jiffies(1000);
ulong left = wait_for_completion_timeout(&wil->wmi_ready, to);
if (0 == left) {
wil_err(wil, "Firmware not ready\n");
return -ETIME;
} else {
wil_dbg(wil, "FW ready after %d ms\n",
jiffies_to_msecs(to-left));
}
return 0;
}
/*
* We reset all the structures, and we reset the UMAC.
* After calling this routine, you're expected to reload
* the firmware.
*/
int wil_reset(struct wil6210_priv *wil)
{
int rc;
cancel_work_sync(&wil->disconnect_worker);
wil6210_disconnect(wil, NULL);
wmi_event_flush(wil);
flush_workqueue(wil->wmi_wq);
flush_workqueue(wil->wmi_wq_conn);
wil6210_disable_irq(wil);
wil->status = 0;
/* TODO: put MAC in reset */
wil_target_reset(wil);
/* init after reset */
wil->pending_connect_cid = -1;
INIT_COMPLETION(wil->wmi_ready);
/* make shadow copy of registers that should not change on run time */
wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
sizeof(struct wil6210_mbox_ctl));
wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
/* TODO: release MAC reset */
wil6210_enable_irq(wil);
/* we just started MAC, wait for FW ready */
rc = wil_wait_for_fw_ready(wil);
return rc;
}
void wil_link_on(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
wil_dbg(wil, "%s()\n", __func__);
netif_carrier_on(ndev);
netif_tx_wake_all_queues(ndev);
}
void wil_link_off(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
wil_dbg(wil, "%s()\n", __func__);
netif_tx_stop_all_queues(ndev);
netif_carrier_off(ndev);
}
static int __wil_up(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
struct ieee80211_channel *channel = wdev->preset_chandef.chan;
int rc;
int bi;
u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
rc = wil_reset(wil);
if (rc)
return rc;
/* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */
wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC);
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
wil_dbg(wil, "type: STATION\n");
bi = 0;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_AP:
wil_dbg(wil, "type: AP\n");
bi = 100;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_P2P_CLIENT:
wil_dbg(wil, "type: P2P_CLIENT\n");
bi = 0;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_P2P_GO:
wil_dbg(wil, "type: P2P_GO\n");
bi = 100;
ndev->type = ARPHRD_ETHER;
break;
case NL80211_IFTYPE_MONITOR:
wil_dbg(wil, "type: Monitor\n");
bi = 0;
ndev->type = ARPHRD_IEEE80211_RADIOTAP;
/* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */
break;
default:
return -EOPNOTSUPP;
}
/* Apply profile in the following order: */
/* SSID and channel for the AP */
switch (wdev->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (wdev->ssid_len == 0) {
wil_err(wil, "SSID not set\n");
return -EINVAL;
}
wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
if (channel)
wmi_set_channel(wil, channel->hw_value);
break;
default:
;
}
/* MAC address - pre-requisite for other commands */
wmi_set_mac_address(wil, ndev->dev_addr);
/* Set up beaconing if required. */
rc = wmi_set_bcon(wil, bi, wmi_nettype);
if (rc)
return rc;
/* Rx VRING. After MAC and beacon */
wil_rx_init(wil);
return 0;
}
int wil_up(struct wil6210_priv *wil)
{
int rc;
mutex_lock(&wil->mutex);
rc = __wil_up(wil);
mutex_unlock(&wil->mutex);
return rc;
}
static int __wil_down(struct wil6210_priv *wil)
{
if (wil->scan_request) {
cfg80211_scan_done(wil->scan_request, true);
wil->scan_request = NULL;
}
wil6210_disconnect(wil, NULL);
wil_rx_fini(wil);
return 0;
}
int wil_down(struct wil6210_priv *wil)
{
int rc;
mutex_lock(&wil->mutex);
rc = __wil_down(wil);
mutex_unlock(&wil->mutex);
return rc;
}