| # |
| # Accelerometer drivers |
| # |
| menu "Accelerometers" |
| |
| config ADIS16201 |
| tristate "Analog Devices ADIS16201 Dual-Axis Digital Inclinometer and Accelerometer" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Analog Devices adis16201 dual-axis |
| digital inclinometer and accelerometer. |
| |
| config ADIS16203 |
| tristate "Analog Devices ADIS16203 Programmable 360 Degrees Inclinometer" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Analog Devices adis16203 Programmable |
| 360 Degrees Inclinometer. |
| |
| config ADIS16204 |
| tristate "Analog Devices ADIS16204 Programmable High-g Digital Impact Sensor and Recorder" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Analog Devices adis16204 Programmable |
| High-g Digital Impact Sensor and Recorder. |
| |
| config ADIS16209 |
| tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Analog Devices adis16209 dual-axis digital inclinometer |
| and accelerometer. |
| |
| config ADIS16220 |
| tristate "Analog Devices ADIS16220 Programmable Digital Vibration Sensor" |
| depends on SPI |
| select IIO_ADIS_LIB |
| help |
| Say yes here to build support for Analog Devices adis16220 programmable |
| digital vibration sensor. |
| |
| config ADIS16240 |
| tristate "Analog Devices ADIS16240 Programmable Impact Sensor and Recorder" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Analog Devices adis16240 programmable |
| impact Sensor and recorder. |
| |
| config KXSD9 |
| tristate "Kionix KXSD9 Accelerometer Driver" |
| depends on SPI |
| help |
| Say yes here to build support for the Kionix KXSD9 accelerometer. |
| Currently this only supports the device via an SPI interface. |
| |
| config LIS3L02DQ |
| tristate "ST Microelectronics LIS3L02DQ Accelerometer Driver" |
| depends on SPI |
| select IIO_TRIGGER if IIO_BUFFER |
| depends on !IIO_BUFFER || IIO_KFIFO_BUF || IIO_SW_RING |
| depends on GENERIC_GPIO |
| help |
| Say yes here to build SPI support for the ST microelectronics |
| accelerometer. The driver supplies direct access via sysfs files |
| and an event interface via a character device. |
| |
| choice |
| prompt "Buffer type" |
| depends on LIS3L02DQ && IIO_BUFFER |
| |
| config LIS3L02DQ_BUF_KFIFO |
| depends on IIO_KFIFO_BUF |
| bool "Simple FIFO" |
| help |
| Kfifo based FIFO. Does not provide any events so it is up |
| to userspace to ensure it reads often enough that data is not |
| lost. |
| |
| config LIS3L02DQ_BUF_RING_SW |
| depends on IIO_SW_RING |
| bool "IIO Software Ring" |
| help |
| Original IIO ring buffer implementation. Provides simple |
| buffer events, half full etc. |
| |
| endchoice |
| |
| config SCA3000 |
| depends on IIO_BUFFER |
| depends on SPI |
| tristate "VTI SCA3000 series accelerometers" |
| help |
| Say yes here to build support for the VTI SCA3000 series of SPI |
| accelerometers. These devices use a hardware ring buffer. |
| |
| endmenu |
