qca-nss-clients/exports/nss_capwap_user.h

/*
 **************************************************************************
 * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all copies.
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
 * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 **************************************************************************
 */

/**
 * nss_capwap_user.h
 *	NSS CAPWAP definitions for kernel and user space
 */

#ifndef __NSS_CAPWAP_USER_H
#define __NSS_CAPWAP_USER_H

/**
 * Maxmimum values for rule configuration parameters
 */
#define NSS_CAPWAP_MAX_MTU			9000
				/**< maximum MTU supported by NSS FW */
#define NSS_CAPWAP_MAX_BUFFER_SIZE		9000
				/**< maximum buffer-size supported by NSS FW */
#define NSS_CAPWAP_MAX_FRAGMENTS		10
				/**< maximum fragments for reassembly */
#define NSS_CAPWAP_MAX_REASSEMBLY_TIMEOUT	(10 * 1000)
				/**< maximum timeout for reassembly - 10 seconds */

/**
 * CAPWAP Rule configure message flags
 */
#define NSS_CAPWAP_TUNNEL_IPV4		2
				/**< IPv4 tunnel */
#define NSS_CAPWAP_TUNNEL_IPV6		3
				/**< IPv6 tunnel */
#define NSS_CAPWAP_TUNNEL_UDP		4
				/**< UDP tunnel */
#define NSS_CAPWAP_TUNNEL_UDPLite	5
				/**< UDPLite tunnel */

/**
 * CAPWAP tunnel create and type flags. These flags are used
 * to determine packet header size during encapsulation.
 */
#define NSS_CAPWAP_RULE_CREATE_VLAN_CONFIGURED	0x1
				/**< VLAN Configured for CAPWAP tunnel */
#define NSS_CAPWAP_RULE_CREATE_PPPOE_CONFIGURED	0x2
				/**< PPPoE configured for CAPWAP tunnel */
#define NSS_CAPWAP_ENCAP_UDPLITE_HDR_CSUM	0x4
				/**< Generate only UDP-Lite header checksum. Otherwise whole UDP-Lite payload */

/**
 * CAPWAP version
 */
#define NSS_CAPWAP_VERSION_V1		0x1
				/**< RFC CAPWAP version */
#define NSS_CAPWAP_VERSION_V2		0x2
				/**< Initial CAPWAP version for a customer */

/**
 * Type of packet. These are mutually exclusive fields.
 */
#define NSS_CAPWAP_PKT_TYPE_UNKNOWN	0x0000
				/**< Don't know the type of CAPWAP packet */
#define NSS_CAPWAP_PKT_TYPE_CONTROL	0x0001
				/** It's a control CAPWAP packet src_port=5247 */
#define NSS_CAPWAP_PKT_TYPE_DATA	0x0002
				/**< It's a data CAPWAP packet src_port=5246 */

/**
 * Addtional fields for identifying what's there in the packet.
 */
#define NSS_CAPWAP_PKT_TYPE_DTLS_ENABLED	0x0004
				/**< It's a DTLS packet. */
#define NSS_CAPWAP_PKT_TYPE_WIRELESS_INFO	0x0008
				/**< W=1, wireless info present */
#define NSS_CAPWAP_PKT_TYPE_802_11		0x0010
				/**< T=1, then set wbid=1 */
#define NSS_CAPWAP_PKT_TYPE_802_3		0x0020
				/**< Data is in 802.3 format */

/**
 * CAPWAP metaheader per-packet for both encap (TX) and decap (RX).
 */
struct nss_capwap_metaheader {
	uint8_t version;	/**< CAPWAP version */
	uint8_t rid;		/**< Radio ID */
	uint16_t tunnel_id;	/**< Tunnel-ID */
	uint8_t dscp;		/**< DSCP value */
	uint8_t vlan_pcp;	/**< VLAN priority .P marking */
	uint16_t type;		/**< Type of CAPWAP packet & What was there in CAPWAP header */
	uint16_t nwireless;	/**< Number of wireless info sections in CAPWAP header */
	uint16_t wireless_qos;	/**< 802.11e qos info */
	uint16_t outer_sgt;	/**< Security Group Tag value in the TrustSec header */
	uint16_t inner_sgt;	/**< Security Group Tag value in the TrustSec header */
	uint32_t flow_id;	/**< Flow identification */
	uint16_t vapid;		/**< VAP ID info */

	uint16_t magic;		/**< Magic for verification purpose. Use only for debugging */

	/*
	 * Put the wl_info at last so we don't have to do copy if 802.11 to 802.3 conversion did not happen.
	 */
	uint8_t wl_info[8];	/* Wireless info preserved from the original packet */
} __packed __aligned(4);

#endif /* __NSS_CAPWAP_USER_H */