| #[cfg(all(test, not(target_os = "emscripten")))] |
| mod tests; |
| |
| use crate::cmp::Ordering; |
| use crate::fmt::{self, Write}; |
| use crate::hash; |
| use crate::io; |
| use crate::iter; |
| use crate::mem; |
| use crate::net::{IpAddr, Ipv4Addr, Ipv6Addr}; |
| use crate::option; |
| use crate::slice; |
| use crate::sys::net::netc as c; |
| use crate::sys_common::net::LookupHost; |
| use crate::sys_common::{FromInner, IntoInner}; |
| use crate::vec; |
| |
| use super::display_buffer::DisplayBuffer; |
| |
| /// An internet socket address, either IPv4 or IPv6. |
| /// |
| /// Internet socket addresses consist of an [IP address], a 16-bit port number, as well |
| /// as possibly some version-dependent additional information. See [`SocketAddrV4`]'s and |
| /// [`SocketAddrV6`]'s respective documentation for more details. |
| /// |
| /// The size of a `SocketAddr` instance may vary depending on the target operating |
| /// system. |
| /// |
| /// [IP address]: IpAddr |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// |
| /// assert_eq!("127.0.0.1:8080".parse(), Ok(socket)); |
| /// assert_eq!(socket.port(), 8080); |
| /// assert_eq!(socket.is_ipv4(), true); |
| /// ``` |
| #[derive(Copy, Clone, PartialEq, Eq, Hash, PartialOrd, Ord)] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| pub enum SocketAddr { |
| /// An IPv4 socket address. |
| #[stable(feature = "rust1", since = "1.0.0")] |
| V4(#[stable(feature = "rust1", since = "1.0.0")] SocketAddrV4), |
| /// An IPv6 socket address. |
| #[stable(feature = "rust1", since = "1.0.0")] |
| V6(#[stable(feature = "rust1", since = "1.0.0")] SocketAddrV6), |
| } |
| |
| /// An IPv4 socket address. |
| /// |
| /// IPv4 socket addresses consist of an [`IPv4` address] and a 16-bit port number, as |
| /// stated in [IETF RFC 793]. |
| /// |
| /// See [`SocketAddr`] for a type encompassing both IPv4 and IPv6 socket addresses. |
| /// |
| /// The size of a `SocketAddrV4` struct may vary depending on the target operating |
| /// system. Do not assume that this type has the same memory layout as the underlying |
| /// system representation. |
| /// |
| /// [IETF RFC 793]: https://tools.ietf.org/html/rfc793 |
| /// [`IPv4` address]: Ipv4Addr |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{Ipv4Addr, SocketAddrV4}; |
| /// |
| /// let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080); |
| /// |
| /// assert_eq!("127.0.0.1:8080".parse(), Ok(socket)); |
| /// assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1)); |
| /// assert_eq!(socket.port(), 8080); |
| /// ``` |
| #[derive(Copy, Clone, Eq, PartialEq)] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| pub struct SocketAddrV4 { |
| ip: Ipv4Addr, |
| port: u16, |
| } |
| |
| /// An IPv6 socket address. |
| /// |
| /// IPv6 socket addresses consist of an [`IPv6` address], a 16-bit port number, as well |
| /// as fields containing the traffic class, the flow label, and a scope identifier |
| /// (see [IETF RFC 2553, Section 3.3] for more details). |
| /// |
| /// See [`SocketAddr`] for a type encompassing both IPv4 and IPv6 socket addresses. |
| /// |
| /// The size of a `SocketAddrV6` struct may vary depending on the target operating |
| /// system. Do not assume that this type has the same memory layout as the underlying |
| /// system representation. |
| /// |
| /// [IETF RFC 2553, Section 3.3]: https://tools.ietf.org/html/rfc2553#section-3.3 |
| /// [`IPv6` address]: Ipv6Addr |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{Ipv6Addr, SocketAddrV6}; |
| /// |
| /// let socket = SocketAddrV6::new(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 1), 8080, 0, 0); |
| /// |
| /// assert_eq!("[2001:db8::1]:8080".parse(), Ok(socket)); |
| /// assert_eq!(socket.ip(), &Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 1)); |
| /// assert_eq!(socket.port(), 8080); |
| /// ``` |
| #[derive(Copy, Clone, Eq, PartialEq)] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| pub struct SocketAddrV6 { |
| ip: Ipv6Addr, |
| port: u16, |
| flowinfo: u32, |
| scope_id: u32, |
| } |
| |
| impl SocketAddr { |
| /// Creates a new socket address from an [IP address] and a port number. |
| /// |
| /// [IP address]: IpAddr |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// assert_eq!(socket.ip(), IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1))); |
| /// assert_eq!(socket.port(), 8080); |
| /// ``` |
| #[stable(feature = "ip_addr", since = "1.7.0")] |
| #[must_use] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn new(ip: IpAddr, port: u16) -> SocketAddr { |
| match ip { |
| IpAddr::V4(a) => SocketAddr::V4(SocketAddrV4::new(a, port)), |
| IpAddr::V6(a) => SocketAddr::V6(SocketAddrV6::new(a, port, 0, 0)), |
| } |
| } |
| |
| /// Returns the IP address associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// assert_eq!(socket.ip(), IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1))); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "ip_addr", since = "1.7.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn ip(&self) -> IpAddr { |
| match *self { |
| SocketAddr::V4(ref a) => IpAddr::V4(*a.ip()), |
| SocketAddr::V6(ref a) => IpAddr::V6(*a.ip()), |
| } |
| } |
| |
| /// Changes the IP address associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let mut socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// socket.set_ip(IpAddr::V4(Ipv4Addr::new(10, 10, 0, 1))); |
| /// assert_eq!(socket.ip(), IpAddr::V4(Ipv4Addr::new(10, 10, 0, 1))); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_ip(&mut self, new_ip: IpAddr) { |
| // `match (*self, new_ip)` would have us mutate a copy of self only to throw it away. |
| match (self, new_ip) { |
| (&mut SocketAddr::V4(ref mut a), IpAddr::V4(new_ip)) => a.set_ip(new_ip), |
| (&mut SocketAddr::V6(ref mut a), IpAddr::V6(new_ip)) => a.set_ip(new_ip), |
| (self_, new_ip) => *self_ = Self::new(new_ip, self_.port()), |
| } |
| } |
| |
| /// Returns the port number associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// assert_eq!(socket.port(), 8080); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn port(&self) -> u16 { |
| match *self { |
| SocketAddr::V4(ref a) => a.port(), |
| SocketAddr::V6(ref a) => a.port(), |
| } |
| } |
| |
| /// Changes the port number associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let mut socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// socket.set_port(1025); |
| /// assert_eq!(socket.port(), 1025); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_port(&mut self, new_port: u16) { |
| match *self { |
| SocketAddr::V4(ref mut a) => a.set_port(new_port), |
| SocketAddr::V6(ref mut a) => a.set_port(new_port), |
| } |
| } |
| |
| /// Returns [`true`] if the [IP address] in this `SocketAddr` is an |
| /// [`IPv4` address], and [`false`] otherwise. |
| /// |
| /// [IP address]: IpAddr |
| /// [`IPv4` address]: IpAddr::V4 |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv4Addr, SocketAddr}; |
| /// |
| /// let socket = SocketAddr::new(IpAddr::V4(Ipv4Addr::new(127, 0, 0, 1)), 8080); |
| /// assert_eq!(socket.is_ipv4(), true); |
| /// assert_eq!(socket.is_ipv6(), false); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "sockaddr_checker", since = "1.16.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn is_ipv4(&self) -> bool { |
| matches!(*self, SocketAddr::V4(_)) |
| } |
| |
| /// Returns [`true`] if the [IP address] in this `SocketAddr` is an |
| /// [`IPv6` address], and [`false`] otherwise. |
| /// |
| /// [IP address]: IpAddr |
| /// [`IPv6` address]: IpAddr::V6 |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{IpAddr, Ipv6Addr, SocketAddr}; |
| /// |
| /// let socket = SocketAddr::new(IpAddr::V6(Ipv6Addr::new(0, 0, 0, 0, 0, 65535, 0, 1)), 8080); |
| /// assert_eq!(socket.is_ipv4(), false); |
| /// assert_eq!(socket.is_ipv6(), true); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "sockaddr_checker", since = "1.16.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn is_ipv6(&self) -> bool { |
| matches!(*self, SocketAddr::V6(_)) |
| } |
| } |
| |
| impl SocketAddrV4 { |
| /// Creates a new socket address from an [`IPv4` address] and a port number. |
| /// |
| /// [`IPv4` address]: Ipv4Addr |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV4, Ipv4Addr}; |
| /// |
| /// let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080); |
| /// ``` |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[must_use] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn new(ip: Ipv4Addr, port: u16) -> SocketAddrV4 { |
| SocketAddrV4 { ip, port } |
| } |
| |
| /// Returns the IP address associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV4, Ipv4Addr}; |
| /// |
| /// let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080); |
| /// assert_eq!(socket.ip(), &Ipv4Addr::new(127, 0, 0, 1)); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn ip(&self) -> &Ipv4Addr { |
| &self.ip |
| } |
| |
| /// Changes the IP address associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV4, Ipv4Addr}; |
| /// |
| /// let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080); |
| /// socket.set_ip(Ipv4Addr::new(192, 168, 0, 1)); |
| /// assert_eq!(socket.ip(), &Ipv4Addr::new(192, 168, 0, 1)); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_ip(&mut self, new_ip: Ipv4Addr) { |
| self.ip = new_ip; |
| } |
| |
| /// Returns the port number associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV4, Ipv4Addr}; |
| /// |
| /// let socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080); |
| /// assert_eq!(socket.port(), 8080); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn port(&self) -> u16 { |
| self.port |
| } |
| |
| /// Changes the port number associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV4, Ipv4Addr}; |
| /// |
| /// let mut socket = SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 8080); |
| /// socket.set_port(4242); |
| /// assert_eq!(socket.port(), 4242); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_port(&mut self, new_port: u16) { |
| self.port = new_port; |
| } |
| } |
| |
| impl SocketAddrV6 { |
| /// Creates a new socket address from an [`IPv6` address], a 16-bit port number, |
| /// and the `flowinfo` and `scope_id` fields. |
| /// |
| /// For more information on the meaning and layout of the `flowinfo` and `scope_id` |
| /// parameters, see [IETF RFC 2553, Section 3.3]. |
| /// |
| /// [IETF RFC 2553, Section 3.3]: https://tools.ietf.org/html/rfc2553#section-3.3 |
| /// [`IPv6` address]: Ipv6Addr |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0); |
| /// ``` |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[must_use] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn new(ip: Ipv6Addr, port: u16, flowinfo: u32, scope_id: u32) -> SocketAddrV6 { |
| SocketAddrV6 { ip, port, flowinfo, scope_id } |
| } |
| |
| /// Returns the IP address associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0); |
| /// assert_eq!(socket.ip(), &Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1)); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn ip(&self) -> &Ipv6Addr { |
| &self.ip |
| } |
| |
| /// Changes the IP address associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0); |
| /// socket.set_ip(Ipv6Addr::new(76, 45, 0, 0, 0, 0, 0, 0)); |
| /// assert_eq!(socket.ip(), &Ipv6Addr::new(76, 45, 0, 0, 0, 0, 0, 0)); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_ip(&mut self, new_ip: Ipv6Addr) { |
| self.ip = new_ip; |
| } |
| |
| /// Returns the port number associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0); |
| /// assert_eq!(socket.port(), 8080); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn port(&self) -> u16 { |
| self.port |
| } |
| |
| /// Changes the port number associated with this socket address. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 0); |
| /// socket.set_port(4242); |
| /// assert_eq!(socket.port(), 4242); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_port(&mut self, new_port: u16) { |
| self.port = new_port; |
| } |
| |
| /// Returns the flow information associated with this address. |
| /// |
| /// This information corresponds to the `sin6_flowinfo` field in C's `netinet/in.h`, |
| /// as specified in [IETF RFC 2553, Section 3.3]. |
| /// It combines information about the flow label and the traffic class as specified |
| /// in [IETF RFC 2460], respectively [Section 6] and [Section 7]. |
| /// |
| /// [IETF RFC 2553, Section 3.3]: https://tools.ietf.org/html/rfc2553#section-3.3 |
| /// [IETF RFC 2460]: https://tools.ietf.org/html/rfc2460 |
| /// [Section 6]: https://tools.ietf.org/html/rfc2460#section-6 |
| /// [Section 7]: https://tools.ietf.org/html/rfc2460#section-7 |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 10, 0); |
| /// assert_eq!(socket.flowinfo(), 10); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn flowinfo(&self) -> u32 { |
| self.flowinfo |
| } |
| |
| /// Changes the flow information associated with this socket address. |
| /// |
| /// See [`SocketAddrV6::flowinfo`]'s documentation for more details. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 10, 0); |
| /// socket.set_flowinfo(56); |
| /// assert_eq!(socket.flowinfo(), 56); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_flowinfo(&mut self, new_flowinfo: u32) { |
| self.flowinfo = new_flowinfo; |
| } |
| |
| /// Returns the scope ID associated with this address. |
| /// |
| /// This information corresponds to the `sin6_scope_id` field in C's `netinet/in.h`, |
| /// as specified in [IETF RFC 2553, Section 3.3]. |
| /// |
| /// [IETF RFC 2553, Section 3.3]: https://tools.ietf.org/html/rfc2553#section-3.3 |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 78); |
| /// assert_eq!(socket.scope_id(), 78); |
| /// ``` |
| #[must_use] |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_socketaddr", issue = "82485")] |
| pub const fn scope_id(&self) -> u32 { |
| self.scope_id |
| } |
| |
| /// Changes the scope ID associated with this socket address. |
| /// |
| /// See [`SocketAddrV6::scope_id`]'s documentation for more details. |
| /// |
| /// # Examples |
| /// |
| /// ``` |
| /// use std::net::{SocketAddrV6, Ipv6Addr}; |
| /// |
| /// let mut socket = SocketAddrV6::new(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1), 8080, 0, 78); |
| /// socket.set_scope_id(42); |
| /// assert_eq!(socket.scope_id(), 42); |
| /// ``` |
| #[stable(feature = "sockaddr_setters", since = "1.9.0")] |
| pub fn set_scope_id(&mut self, new_scope_id: u32) { |
| self.scope_id = new_scope_id; |
| } |
| } |
| |
| impl FromInner<c::sockaddr_in> for SocketAddrV4 { |
| fn from_inner(addr: c::sockaddr_in) -> SocketAddrV4 { |
| SocketAddrV4 { ip: Ipv4Addr::from_inner(addr.sin_addr), port: u16::from_be(addr.sin_port) } |
| } |
| } |
| |
| impl FromInner<c::sockaddr_in6> for SocketAddrV6 { |
| fn from_inner(addr: c::sockaddr_in6) -> SocketAddrV6 { |
| SocketAddrV6 { |
| ip: Ipv6Addr::from_inner(addr.sin6_addr), |
| port: u16::from_be(addr.sin6_port), |
| flowinfo: addr.sin6_flowinfo, |
| scope_id: addr.sin6_scope_id, |
| } |
| } |
| } |
| |
| impl IntoInner<c::sockaddr_in> for SocketAddrV4 { |
| fn into_inner(self) -> c::sockaddr_in { |
| c::sockaddr_in { |
| sin_family: c::AF_INET as c::sa_family_t, |
| sin_port: self.port.to_be(), |
| sin_addr: self.ip.into_inner(), |
| ..unsafe { mem::zeroed() } |
| } |
| } |
| } |
| |
| impl IntoInner<c::sockaddr_in6> for SocketAddrV6 { |
| fn into_inner(self) -> c::sockaddr_in6 { |
| c::sockaddr_in6 { |
| sin6_family: c::AF_INET6 as c::sa_family_t, |
| sin6_port: self.port.to_be(), |
| sin6_addr: self.ip.into_inner(), |
| sin6_flowinfo: self.flowinfo, |
| sin6_scope_id: self.scope_id, |
| ..unsafe { mem::zeroed() } |
| } |
| } |
| } |
| |
| #[stable(feature = "ip_from_ip", since = "1.16.0")] |
| impl From<SocketAddrV4> for SocketAddr { |
| /// Converts a [`SocketAddrV4`] into a [`SocketAddr::V4`]. |
| fn from(sock4: SocketAddrV4) -> SocketAddr { |
| SocketAddr::V4(sock4) |
| } |
| } |
| |
| #[stable(feature = "ip_from_ip", since = "1.16.0")] |
| impl From<SocketAddrV6> for SocketAddr { |
| /// Converts a [`SocketAddrV6`] into a [`SocketAddr::V6`]. |
| fn from(sock6: SocketAddrV6) -> SocketAddr { |
| SocketAddr::V6(sock6) |
| } |
| } |
| |
| #[stable(feature = "addr_from_into_ip", since = "1.17.0")] |
| impl<I: Into<IpAddr>> From<(I, u16)> for SocketAddr { |
| /// Converts a tuple struct (Into<[`IpAddr`]>, `u16`) into a [`SocketAddr`]. |
| /// |
| /// This conversion creates a [`SocketAddr::V4`] for an [`IpAddr::V4`] |
| /// and creates a [`SocketAddr::V6`] for an [`IpAddr::V6`]. |
| /// |
| /// `u16` is treated as port of the newly created [`SocketAddr`]. |
| fn from(pieces: (I, u16)) -> SocketAddr { |
| SocketAddr::new(pieces.0.into(), pieces.1) |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl fmt::Display for SocketAddr { |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { |
| match *self { |
| SocketAddr::V4(ref a) => a.fmt(f), |
| SocketAddr::V6(ref a) => a.fmt(f), |
| } |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl fmt::Debug for SocketAddr { |
| fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result { |
| fmt::Display::fmt(self, fmt) |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl fmt::Display for SocketAddrV4 { |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { |
| // If there are no alignment requirements, write the socket address directly to `f`. |
| // Otherwise, write it to a local buffer and then use `f.pad`. |
| if f.precision().is_none() && f.width().is_none() { |
| write!(f, "{}:{}", self.ip(), self.port()) |
| } else { |
| const LONGEST_IPV4_SOCKET_ADDR: &str = "255.255.255.255:65536"; |
| |
| let mut buf = DisplayBuffer::<{ LONGEST_IPV4_SOCKET_ADDR.len() }>::new(); |
| // Buffer is long enough for the longest possible IPv4 socket address, so this should never fail. |
| write!(buf, "{}:{}", self.ip(), self.port()).unwrap(); |
| |
| f.pad(buf.as_str()) |
| } |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl fmt::Debug for SocketAddrV4 { |
| fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result { |
| fmt::Display::fmt(self, fmt) |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl fmt::Display for SocketAddrV6 { |
| fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { |
| // If there are no alignment requirements, write the socket address directly to `f`. |
| // Otherwise, write it to a local buffer and then use `f.pad`. |
| if f.precision().is_none() && f.width().is_none() { |
| match self.scope_id() { |
| 0 => write!(f, "[{}]:{}", self.ip(), self.port()), |
| scope_id => write!(f, "[{}%{}]:{}", self.ip(), scope_id, self.port()), |
| } |
| } else { |
| const LONGEST_IPV6_SOCKET_ADDR: &str = |
| "[ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff%4294967296]:65536"; |
| |
| let mut buf = DisplayBuffer::<{ LONGEST_IPV6_SOCKET_ADDR.len() }>::new(); |
| match self.scope_id() { |
| 0 => write!(buf, "[{}]:{}", self.ip(), self.port()), |
| scope_id => write!(buf, "[{}%{}]:{}", self.ip(), scope_id, self.port()), |
| } |
| // Buffer is long enough for the longest possible IPv6 socket address, so this should never fail. |
| .unwrap(); |
| |
| f.pad(buf.as_str()) |
| } |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl fmt::Debug for SocketAddrV6 { |
| fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result { |
| fmt::Display::fmt(self, fmt) |
| } |
| } |
| |
| #[stable(feature = "socketaddr_ordering", since = "1.45.0")] |
| impl PartialOrd for SocketAddrV4 { |
| fn partial_cmp(&self, other: &SocketAddrV4) -> Option<Ordering> { |
| Some(self.cmp(other)) |
| } |
| } |
| |
| #[stable(feature = "socketaddr_ordering", since = "1.45.0")] |
| impl PartialOrd for SocketAddrV6 { |
| fn partial_cmp(&self, other: &SocketAddrV6) -> Option<Ordering> { |
| Some(self.cmp(other)) |
| } |
| } |
| |
| #[stable(feature = "socketaddr_ordering", since = "1.45.0")] |
| impl Ord for SocketAddrV4 { |
| fn cmp(&self, other: &SocketAddrV4) -> Ordering { |
| self.ip().cmp(other.ip()).then(self.port().cmp(&other.port())) |
| } |
| } |
| |
| #[stable(feature = "socketaddr_ordering", since = "1.45.0")] |
| impl Ord for SocketAddrV6 { |
| fn cmp(&self, other: &SocketAddrV6) -> Ordering { |
| self.ip().cmp(other.ip()).then(self.port().cmp(&other.port())) |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl hash::Hash for SocketAddrV4 { |
| fn hash<H: hash::Hasher>(&self, s: &mut H) { |
| (self.port, self.ip).hash(s) |
| } |
| } |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl hash::Hash for SocketAddrV6 { |
| fn hash<H: hash::Hasher>(&self, s: &mut H) { |
| (self.port, &self.ip, self.flowinfo, self.scope_id).hash(s) |
| } |
| } |
| |
| /// A trait for objects which can be converted or resolved to one or more |
| /// [`SocketAddr`] values. |
| /// |
| /// This trait is used for generic address resolution when constructing network |
| /// objects. By default it is implemented for the following types: |
| /// |
| /// * [`SocketAddr`]: [`to_socket_addrs`] is the identity function. |
| /// |
| /// * [`SocketAddrV4`], [`SocketAddrV6`], <code>([IpAddr], [u16])</code>, |
| /// <code>([Ipv4Addr], [u16])</code>, <code>([Ipv6Addr], [u16])</code>: |
| /// [`to_socket_addrs`] constructs a [`SocketAddr`] trivially. |
| /// |
| /// * <code>(&[str], [u16])</code>: <code>&[str]</code> should be either a string representation |
| /// of an [`IpAddr`] address as expected by [`FromStr`] implementation or a host |
| /// name. [`u16`] is the port number. |
| /// |
| /// * <code>&[str]</code>: the string should be either a string representation of a |
| /// [`SocketAddr`] as expected by its [`FromStr`] implementation or a string like |
| /// `<host_name>:<port>` pair where `<port>` is a [`u16`] value. |
| /// |
| /// This trait allows constructing network objects like [`TcpStream`] or |
| /// [`UdpSocket`] easily with values of various types for the bind/connection |
| /// address. It is needed because sometimes one type is more appropriate than |
| /// the other: for simple uses a string like `"localhost:12345"` is much nicer |
| /// than manual construction of the corresponding [`SocketAddr`], but sometimes |
| /// [`SocketAddr`] value is *the* main source of the address, and converting it to |
| /// some other type (e.g., a string) just for it to be converted back to |
| /// [`SocketAddr`] in constructor methods is pointless. |
| /// |
| /// Addresses returned by the operating system that are not IP addresses are |
| /// silently ignored. |
| /// |
| /// [`FromStr`]: crate::str::FromStr "std::str::FromStr" |
| /// [`TcpStream`]: crate::net::TcpStream "net::TcpStream" |
| /// [`to_socket_addrs`]: ToSocketAddrs::to_socket_addrs |
| /// [`UdpSocket`]: crate::net::UdpSocket "net::UdpSocket" |
| /// |
| /// # Examples |
| /// |
| /// Creating a [`SocketAddr`] iterator that yields one item: |
| /// |
| /// ``` |
| /// use std::net::{ToSocketAddrs, SocketAddr}; |
| /// |
| /// let addr = SocketAddr::from(([127, 0, 0, 1], 443)); |
| /// let mut addrs_iter = addr.to_socket_addrs().unwrap(); |
| /// |
| /// assert_eq!(Some(addr), addrs_iter.next()); |
| /// assert!(addrs_iter.next().is_none()); |
| /// ``` |
| /// |
| /// Creating a [`SocketAddr`] iterator from a hostname: |
| /// |
| /// ```no_run |
| /// use std::net::{SocketAddr, ToSocketAddrs}; |
| /// |
| /// // assuming 'localhost' resolves to 127.0.0.1 |
| /// let mut addrs_iter = "localhost:443".to_socket_addrs().unwrap(); |
| /// assert_eq!(addrs_iter.next(), Some(SocketAddr::from(([127, 0, 0, 1], 443)))); |
| /// assert!(addrs_iter.next().is_none()); |
| /// |
| /// // assuming 'foo' does not resolve |
| /// assert!("foo:443".to_socket_addrs().is_err()); |
| /// ``` |
| /// |
| /// Creating a [`SocketAddr`] iterator that yields multiple items: |
| /// |
| /// ``` |
| /// use std::net::{SocketAddr, ToSocketAddrs}; |
| /// |
| /// let addr1 = SocketAddr::from(([0, 0, 0, 0], 80)); |
| /// let addr2 = SocketAddr::from(([127, 0, 0, 1], 443)); |
| /// let addrs = vec![addr1, addr2]; |
| /// |
| /// let mut addrs_iter = (&addrs[..]).to_socket_addrs().unwrap(); |
| /// |
| /// assert_eq!(Some(addr1), addrs_iter.next()); |
| /// assert_eq!(Some(addr2), addrs_iter.next()); |
| /// assert!(addrs_iter.next().is_none()); |
| /// ``` |
| /// |
| /// Attempting to create a [`SocketAddr`] iterator from an improperly formatted |
| /// socket address `&str` (missing the port): |
| /// |
| /// ``` |
| /// use std::io; |
| /// use std::net::ToSocketAddrs; |
| /// |
| /// let err = "127.0.0.1".to_socket_addrs().unwrap_err(); |
| /// assert_eq!(err.kind(), io::ErrorKind::InvalidInput); |
| /// ``` |
| /// |
| /// [`TcpStream::connect`] is an example of an function that utilizes |
| /// `ToSocketAddrs` as a trait bound on its parameter in order to accept |
| /// different types: |
| /// |
| /// ```no_run |
| /// use std::net::{TcpStream, Ipv4Addr}; |
| /// |
| /// let stream = TcpStream::connect(("127.0.0.1", 443)); |
| /// // or |
| /// let stream = TcpStream::connect("127.0.0.1:443"); |
| /// // or |
| /// let stream = TcpStream::connect((Ipv4Addr::new(127, 0, 0, 1), 443)); |
| /// ``` |
| /// |
| /// [`TcpStream::connect`]: crate::net::TcpStream::connect |
| #[stable(feature = "rust1", since = "1.0.0")] |
| pub trait ToSocketAddrs { |
| /// Returned iterator over socket addresses which this type may correspond |
| /// to. |
| #[stable(feature = "rust1", since = "1.0.0")] |
| type Iter: Iterator<Item = SocketAddr>; |
| |
| /// Converts this object to an iterator of resolved [`SocketAddr`]s. |
| /// |
| /// The returned iterator might not actually yield any values depending on the |
| /// outcome of any resolution performed. |
| /// |
| /// Note that this function may block the current thread while resolution is |
| /// performed. |
| #[stable(feature = "rust1", since = "1.0.0")] |
| fn to_socket_addrs(&self) -> io::Result<Self::Iter>; |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for SocketAddr { |
| type Iter = option::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<option::IntoIter<SocketAddr>> { |
| Ok(Some(*self).into_iter()) |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for SocketAddrV4 { |
| type Iter = option::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<option::IntoIter<SocketAddr>> { |
| SocketAddr::V4(*self).to_socket_addrs() |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for SocketAddrV6 { |
| type Iter = option::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<option::IntoIter<SocketAddr>> { |
| SocketAddr::V6(*self).to_socket_addrs() |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for (IpAddr, u16) { |
| type Iter = option::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<option::IntoIter<SocketAddr>> { |
| let (ip, port) = *self; |
| match ip { |
| IpAddr::V4(ref a) => (*a, port).to_socket_addrs(), |
| IpAddr::V6(ref a) => (*a, port).to_socket_addrs(), |
| } |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for (Ipv4Addr, u16) { |
| type Iter = option::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<option::IntoIter<SocketAddr>> { |
| let (ip, port) = *self; |
| SocketAddrV4::new(ip, port).to_socket_addrs() |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for (Ipv6Addr, u16) { |
| type Iter = option::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<option::IntoIter<SocketAddr>> { |
| let (ip, port) = *self; |
| SocketAddrV6::new(ip, port, 0, 0).to_socket_addrs() |
| } |
| } |
| |
| fn resolve_socket_addr(lh: LookupHost) -> io::Result<vec::IntoIter<SocketAddr>> { |
| let p = lh.port(); |
| let v: Vec<_> = lh |
| .map(|mut a| { |
| a.set_port(p); |
| a |
| }) |
| .collect(); |
| Ok(v.into_iter()) |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for (&str, u16) { |
| type Iter = vec::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<vec::IntoIter<SocketAddr>> { |
| let (host, port) = *self; |
| |
| // try to parse the host as a regular IP address first |
| if let Ok(addr) = host.parse::<Ipv4Addr>() { |
| let addr = SocketAddrV4::new(addr, port); |
| return Ok(vec![SocketAddr::V4(addr)].into_iter()); |
| } |
| if let Ok(addr) = host.parse::<Ipv6Addr>() { |
| let addr = SocketAddrV6::new(addr, port, 0, 0); |
| return Ok(vec![SocketAddr::V6(addr)].into_iter()); |
| } |
| |
| resolve_socket_addr((host, port).try_into()?) |
| } |
| } |
| |
| #[stable(feature = "string_u16_to_socket_addrs", since = "1.46.0")] |
| impl ToSocketAddrs for (String, u16) { |
| type Iter = vec::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<vec::IntoIter<SocketAddr>> { |
| (&*self.0, self.1).to_socket_addrs() |
| } |
| } |
| |
| // accepts strings like 'localhost:12345' |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl ToSocketAddrs for str { |
| type Iter = vec::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<vec::IntoIter<SocketAddr>> { |
| // try to parse as a regular SocketAddr first |
| if let Ok(addr) = self.parse() { |
| return Ok(vec![addr].into_iter()); |
| } |
| |
| resolve_socket_addr(self.try_into()?) |
| } |
| } |
| |
| #[stable(feature = "slice_to_socket_addrs", since = "1.8.0")] |
| impl<'a> ToSocketAddrs for &'a [SocketAddr] { |
| type Iter = iter::Cloned<slice::Iter<'a, SocketAddr>>; |
| |
| fn to_socket_addrs(&self) -> io::Result<Self::Iter> { |
| Ok(self.iter().cloned()) |
| } |
| } |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| impl<T: ToSocketAddrs + ?Sized> ToSocketAddrs for &T { |
| type Iter = T::Iter; |
| fn to_socket_addrs(&self) -> io::Result<T::Iter> { |
| (**self).to_socket_addrs() |
| } |
| } |
| |
| #[stable(feature = "string_to_socket_addrs", since = "1.16.0")] |
| impl ToSocketAddrs for String { |
| type Iter = vec::IntoIter<SocketAddr>; |
| fn to_socket_addrs(&self) -> io::Result<vec::IntoIter<SocketAddr>> { |
| (&**self).to_socket_addrs() |
| } |
| } |