| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2019 Amlogic, Inc. All rights reserved. |
| */ |
| |
| #include <common.h> |
| #include <amlogic/media/vout/lcd/aml_lcd.h> |
| #ifdef CONFIG_AML_LCD_EXTERN |
| //#include "lcd_extern.h" |
| #endif |
| |
| static char lcd_cpu_gpio[LCD_CPU_GPIO_NUM_MAX][LCD_CPU_GPIO_NAME_MAX] = { |
| "GPIOZ_9", /* panel rst */ |
| "GPIOZ_8", /* panel power */ |
| "invalid", /* ending flag */ |
| }; |
| |
| static struct lcd_power_step_s lcd_power_on_step[] = { |
| {LCD_POWER_TYPE_CPU, 1,0,100,}, /* lcd power */ |
| {LCD_POWER_TYPE_CPU, 0,0,10,}, /* lcd_reset */ |
| {LCD_POWER_TYPE_CPU, 0,1,20,}, /* lcd_reset */ |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| static struct lcd_power_step_s lcd_power_off_step[] = { |
| {LCD_POWER_TYPE_SIGNAL,0,0,50,}, /* signal */ |
| {LCD_POWER_TYPE_CPU, 0,0,10,}, /* lcd_reset */ |
| {LCD_POWER_TYPE_CPU, 1,1,100,}, /* power off */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| |
| static struct lcd_power_step_s lcd_power_on_step_P070ACB[] = { |
| {LCD_POWER_TYPE_CPU, 1,0,200,}, /* lcd power */ |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| static struct lcd_power_step_s lcd_power_off_step_P070ACB[] = { |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_CPU, 0,0,20,}, /* lcd_reset */ |
| {LCD_POWER_TYPE_CPU, 1,1,100,}, /* power off */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| |
| static struct lcd_power_step_s lcd_power_on_step_TL050FHV02CT[] = { |
| {LCD_POWER_TYPE_CPU, 1,0,200,}, /* lcd power */ |
| {LCD_POWER_TYPE_CPU, 0,1,20,}, /* lcd reset: 1 */ |
| {LCD_POWER_TYPE_CPU, 0,0,10,}, /* lcd reset: 0 */ |
| {LCD_POWER_TYPE_CPU, 0,1,20,}, /* lcd reset: 1 */ |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| static struct lcd_power_step_s lcd_power_off_step_TL050FHV02CT[] = { |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_CPU, 0,0,20,}, /* lcd_reset */ |
| {LCD_POWER_TYPE_CPU, 1,1,100,}, /* power off */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| |
| static struct lcd_power_step_s lcd_power_on_step_TL070WSH27[] = { |
| {LCD_POWER_TYPE_CPU, 1,0,100,}, /* lcd power */ |
| {LCD_POWER_TYPE_CPU, 0,0,10,}, /* lcd reset: 0 */ |
| {LCD_POWER_TYPE_CPU, 0,1,20,}, /* lcd reset: 1 */ |
| {LCD_POWER_TYPE_SIGNAL,0,0,0,}, /* signal */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| static struct lcd_power_step_s lcd_power_off_step_TL070WSH27[] = { |
| {LCD_POWER_TYPE_SIGNAL,0,0,10,}, /* signal */ |
| {LCD_POWER_TYPE_CPU, 0,0,10,}, /* lcd_reset */ |
| {LCD_POWER_TYPE_CPU, 1,1,100,}, /* power off */ |
| {LCD_POWER_TYPE_MAX, 0,0,0,}, /* ending flag */ |
| }; |
| |
| static unsigned char mipi_init_on_table[DSI_INIT_ON_MAX] = {//table size < 100 |
| 0x05, 1, 0x11, |
| 0xfd, 1, 20, |
| 0x05, 1, 0x29, |
| 0xfd, 1, 20, |
| 0xff, 0, //ending |
| }; |
| static unsigned char mipi_init_off_table[DSI_INIT_OFF_MAX] = {//table size < 50 |
| 0x05, 1, 0x28, |
| 0xfd, 1, 10, |
| 0x05, 1, 0x10, |
| 0xfd, 1, 10, |
| 0xff, 0, //ending |
| }; |
| |
| static unsigned char mipi_init_on_table_P070ACB[DSI_INIT_ON_MAX] = {//table size < 100 |
| 0xfd, 1, 10, |
| 0xf0, 3, 0, 1, 30, /* reset high, delay 30ms */ |
| 0xf0, 3, 0, 0, 10, /* reset low, delay 10ms */ |
| 0xf0, 3, 0, 1, 30, /* reset high, delay 30ms */ |
| 0xfc, 2, 0x04, 3, /* check_reg, check_cnt */ |
| 0xff, 0, //ending |
| }; |
| static unsigned char mipi_init_off_table_P070ACB[DSI_INIT_OFF_MAX] = {//table size < 50 |
| 0xff, 0, //ending |
| }; |
| |
| static unsigned char mipi_init_on_table_TL050FHV02CT[DSI_INIT_ON_MAX] = {//table size < 100 |
| 0xff, 0, //ending |
| }; |
| static unsigned char mipi_init_off_table_TL050FHV02CT[DSI_INIT_OFF_MAX] = {//table size < 50 |
| 0xff, 0, //ending |
| }; |
| |
| static unsigned char mipi_init_on_table_TL070WSH27[DSI_INIT_ON_MAX] = {//table size < 100 |
| 0x05, 1, 0x11, |
| 0xfd, 1, 100, |
| 0x05, 1, 0x29, |
| 0xfd, 1, 20, |
| 0xff, 0, //ending |
| }; |
| static unsigned char mipi_init_off_table_TL070WSH27[DSI_INIT_OFF_MAX] = {//table size < 50 |
| 0x05, 1, 0x28, |
| 0xfd, 1, 100, |
| 0x05, 1, 0x10, |
| 0xfd, 1, 10, |
| 0xff, 0, //ending |
| }; |
| |
| static char lcd_bl_gpio[BL_GPIO_NUM_MAX][LCD_CPU_GPIO_NAME_MAX] = { |
| "GPIOH_4", /* BL_EN */ |
| "GPIOH_5", /* BL_PWM */ |
| "invalid", /* ending flag */ |
| }; |
| |
| struct ext_lcd_config_s ext_lcd_config[LCD_NUM_MAX] = { |
| {/* B080XAN01*/ |
| "lcd_0",LCD_MIPI,8, |
| /* basic timing */ |
| 768,1024,948,1140,64,56,0,50,30,0, |
| /* clk_attr */ |
| 0,0,1,64843200,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* mipi_attr */ |
| 4,550,0,1,0,2,1,0,Rsv_val,Rsv_val, |
| /* cmd init */ |
| mipi_init_on_table, mipi_init_off_table, |
| /* power step */ |
| lcd_power_on_step, lcd_power_off_step, |
| /* backlight */ |
| 100,255,10,128,128, |
| BL_CTRL_PWM,0,1,0,200,200, |
| BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {/* P070ACB_FT*/ |
| "lcd_1",LCD_MIPI,8, |
| /* basic timing */ |
| 600,1024,770,1070,10,80,0,6,20,0, |
| /* clk_attr */ |
| 0,0,1,49434000,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* mipi_attr */ |
| 4,400,0,1,0,2,0,0,Rsv_val,1, |
| /* cmd init */ |
| mipi_init_on_table_P070ACB, mipi_init_off_table_P070ACB, |
| /* power step */ |
| lcd_power_on_step_P070ACB, lcd_power_off_step_P070ACB, |
| /* backlight */ |
| 100,255,10,128,128, |
| BL_CTRL_PWM,0,1,0,200,200, |
| BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {/* TL050FHV02CT*/ |
| "lcd_2",LCD_MIPI,8, |
| /* basic timing */ |
| 1080,1920,1125,2100,5,30,0,44,108,0, |
| /* clk_attr */ |
| 0,0,1,118125000,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* mipi_attr */ |
| 4,960,0,1,0,2,1,0,Rsv_val,2, |
| /* cmd init */ |
| mipi_init_on_table_TL050FHV02CT, mipi_init_off_table_TL050FHV02CT, |
| /* power step */ |
| lcd_power_on_step_TL050FHV02CT, lcd_power_off_step_TL050FHV02CT, |
| /* backlight */ |
| 100,255,10,128,128, |
| BL_CTRL_PWM,0,1,0,200,200, |
| BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {/* TL070WSH27*/ |
| "lcd_3",LCD_MIPI,8, |
| /* basic timing */ |
| 1024,600,1250,630,80,100,0,5,20,0, |
| /* clk_attr */ |
| 0,0,1,47250000,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| /* mipi_attr */ |
| 4,300,0,1,0,2,1,0,Rsv_val,Rsv_val, |
| /* cmd init */ |
| mipi_init_on_table_TL070WSH27, mipi_init_off_table_TL070WSH27, |
| /* power step */ |
| lcd_power_on_step_TL070WSH27, lcd_power_off_step_TL070WSH27, |
| /* backlight */ |
| 100,255,10,128,128, |
| BL_CTRL_PWM,0,1,0,200,200, |
| BL_PWM_NEGATIVE,BL_PWM_F,180,100,25,1,1, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| Rsv_val,Rsv_val,Rsv_val,Rsv_val, |
| 10,10,Rsv_val}, |
| |
| {.panel_type = "invalid"}, |
| }; |
| |
| static struct lcd_pinmux_ctrl_s lcd_pinmux_ctrl[LCD_PINMX_MAX] = { |
| { |
| .name = "lcd_pin", |
| .pinmux_set = {{LCD_PINMUX_END, 0x0}}, |
| .pinmux_clr = {{LCD_PINMUX_END, 0x0}}, |
| }, |
| { |
| .name = "invalid", |
| }, |
| }; |
| |
| static struct lcd_pinmux_ctrl_s lcd_bl_pinmux_ctrl[BL_PINMUX_MAX] = { |
| { |
| .name = "bl_pwm_on_pin", //GPIOH_5 |
| .pinmux_set = {{11, 0x00400000}, {LCD_PINMUX_END, 0x0}}, |
| .pinmux_clr = {{11, 0x00f00000}, {LCD_PINMUX_END, 0x0}}, |
| }, |
| { |
| .name = "invalid", |
| }, |
| }; |
| |
| #ifdef CONFIG_AML_LCD_EXTERN |
| static char lcd_ext_gpio[LCD_EXTERN_GPIO_NUM_MAX][LCD_CPU_GPIO_NAME_MAX] = { |
| "invalid", /* ending flag */ |
| }; |
| |
| static unsigned char init_on_table[LCD_EXTERN_INIT_ON_MAX] = { |
| 0xc0, 2, 0x01, 0x2b, |
| 0xc0, 2, 0x02, 0x05, |
| 0xc0, 2, 0x03, 0x00, |
| 0xc0, 2, 0x04, 0x00, |
| 0xc0, 2, 0x05, 0x0c, |
| 0xc0, 2, 0x06, 0x04, |
| 0xc0, 2, 0x07, 0x21, |
| 0xc0, 2, 0x08, 0x0f, |
| 0xc0, 2, 0x09, 0x04, |
| 0xc0, 2, 0x0a, 0x00, |
| 0xc0, 2, 0x0b, 0x04, |
| 0xc0, 2, 0xff, 0x00, |
| 0xfd, 1, 100, /* delay 100ms */ |
| 0xff, 0, /* ending */ |
| }; |
| |
| static unsigned char init_off_table[LCD_EXTERN_INIT_OFF_MAX] = { |
| 0xff, 0, /* ending */ |
| }; |
| |
| struct lcd_extern_common_s ext_common_dft = { |
| .lcd_ext_key_valid = 0, |
| .lcd_ext_num = 1, |
| .pinmux_set = {{LCD_PINMUX_END, 0x0} }, |
| .pinmux_clr = {{LCD_PINMUX_END, 0x0} }, |
| }; |
| |
| struct lcd_extern_config_s ext_config_dtf[LCD_EXTERN_NUM_MAX] = { |
| { |
| .index = 0, |
| .name = "invalid", |
| /* LCD_EXTERN_I2C, LCD_EXTERN_SPI, LCD_EXTERN_MAX */ |
| .type = LCD_EXTERN_MAX, |
| .status = 0, /* 0=disable, 1=enable */ |
| .i2c_addr = 0x20, /* 7bit i2c address */ |
| .i2c_addr2 = 0x74, /* 7bit i2c address, 0xff for none */ |
| /* LCD_EXTERN_I2C_BUS_0/1/2/3/4 */ |
| .i2c_bus = LCD_EXTERN_I2C_BUS_1, |
| .cmd_size = 0xff, |
| .table_init_on = init_on_table, |
| .table_init_off = init_off_table, |
| }, |
| { |
| .index = LCD_EXTERN_INDEX_INVALID, |
| }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_AML_BL_EXTERN |
| static unsigned char bl_ext_init_on[BL_EXTERN_INIT_ON_MAX] = { |
| 0xff, 0, //ending flag |
| }; |
| |
| static unsigned char bl_ext_init_off[BL_EXTERN_INIT_OFF_MAX] = { |
| 0xff, 0, //ending flag |
| }; |
| |
| struct bl_extern_config_s bl_extern_config_dtf = { |
| .index = BL_EXTERN_INDEX_INVALID, |
| .name = "none", |
| .type = BL_EXTERN_MAX, |
| .i2c_addr = 0xff, |
| .i2c_bus = BL_EXTERN_I2C_BUS_MAX, |
| .dim_min = 10, |
| .dim_max = 255, |
| |
| .init_loaded = 0, |
| .cmd_size = 0xff, |
| .init_on = bl_ext_init_on, |
| .init_off = bl_ext_init_off, |
| .init_on_cnt = sizeof(bl_ext_init_on), |
| .init_off_cnt = sizeof(bl_ext_init_off), |
| }; |
| #endif |
| |
| /*************************************************** |
| * lcd default config |
| ***************************************************/ |
| static struct lcd_dft_config_s lcd_dft_conf = { |
| .lcd_gpio = lcd_cpu_gpio, |
| .key_valid = 0, |
| .clk_path = 0, |
| .mode = LCD_MODE_TABLET, |
| .ext_lcd = ext_lcd_config, |
| .lcd_pinmux = lcd_pinmux_ctrl, |
| |
| #ifdef CONFIG_AML_LCD_EXTERN |
| .ext_gpio = lcd_ext_gpio[0], |
| .ext_common = &ext_common_dft, |
| .ext_conf = ext_config_dtf, |
| #endif |
| .bl_gpio = lcd_bl_gpio, |
| .bl_pinmux = lcd_bl_pinmux_ctrl, |
| }; |
| |
| void lcd_config_bsp_init(void) |
| { |
| struct aml_lcd_data_s *pdata = aml_lcd_get_data(); |
| |
| if (pdata) |
| pdata->dft_conf[0] = &lcd_dft_conf; |
| } |
| |