| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * (C) Copyright 2015 Rockchip Electronics Co., Ltd | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <clk.h> | 
 | #include <dm.h> | 
 | #include <ram.h> | 
 | #include <asm/io.h> | 
 | #include <asm/arch/clock.h> | 
 | #include <asm/arch/periph.h> | 
 | #include <asm/arch/grf_rk3036.h> | 
 | #include <asm/arch/boot_mode.h> | 
 | #include <asm/arch/sdram_rk3036.h> | 
 | #include <asm/gpio.h> | 
 | #include <dm/pinctrl.h> | 
 |  | 
 | DECLARE_GLOBAL_DATA_PTR; | 
 |  | 
 | __weak int rk_board_late_init(void) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | int board_late_init(void) | 
 | { | 
 | 	setup_boot_mode(); | 
 |  | 
 | 	return rk_board_late_init(); | 
 | } | 
 |  | 
 | int board_init(void) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | #if !CONFIG_IS_ENABLED(RAM) | 
 | /* | 
 |  * When CONFIG_RAM is enabled, the dram_init() function is implemented | 
 |  * in sdram_common.c. | 
 |  */ | 
 | int dram_init(void) | 
 | { | 
 | 	gd->ram_size = sdram_size(); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | #ifndef CONFIG_SYS_DCACHE_OFF | 
 | void enable_caches(void) | 
 | { | 
 | 	/* Enable D-cache. I-cache is already enabled in start.S */ | 
 | 	dcache_enable(); | 
 | } | 
 | #endif | 
 |  | 
 | #if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) | 
 | #include <usb.h> | 
 | #include <usb/dwc2_udc.h> | 
 |  | 
 | static struct dwc2_plat_otg_data rk3036_otg_data = { | 
 | 	.rx_fifo_sz	= 512, | 
 | 	.np_tx_fifo_sz	= 16, | 
 | 	.tx_fifo_sz	= 128, | 
 | }; | 
 |  | 
 | int board_usb_init(int index, enum usb_init_type init) | 
 | { | 
 | 	int node; | 
 | 	const char *mode; | 
 | 	bool matched = false; | 
 | 	const void *blob = gd->fdt_blob; | 
 |  | 
 | 	/* find the usb_otg node */ | 
 | 	node = fdt_node_offset_by_compatible(blob, -1, | 
 | 					"rockchip,rk3288-usb"); | 
 |  | 
 | 	while (node > 0) { | 
 | 		mode = fdt_getprop(blob, node, "dr_mode", NULL); | 
 | 		if (mode && strcmp(mode, "otg") == 0) { | 
 | 			matched = true; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		node = fdt_node_offset_by_compatible(blob, node, | 
 | 					"rockchip,rk3288-usb"); | 
 | 	} | 
 | 	if (!matched) { | 
 | 		debug("Not found usb_otg device\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	rk3036_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); | 
 |  | 
 | 	return dwc2_udc_probe(&rk3036_otg_data); | 
 | } | 
 |  | 
 | int board_usb_cleanup(int index, enum usb_init_type init) | 
 | { | 
 | 	return 0; | 
 | } | 
 | #endif |