board/amlogic/configs/c1_gq_p2.h - manifest_repos/u-boot - Git at Google


 /*
  * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 */

 #ifndef __BOARD_CFG_H__
 #define __BOARD_CFG_H__

 #include <asm/arch/cpu.h>

 /* UBOOT Facotry usb burning config */
 #ifndef AML_DISABLE_UPDATE_MODE
 #define CONFIG_AML_V3_FACTORY_BURN 1
 #define CONFIG_AML_V3_USB_TOOl 1
 #define CONFIG_USB_GADGET_DOWNLOAD 1
 #define CONFIG_FASTBOOT_DWC_PCD 1
 #define CONFIG_USB_DEVICE_V2 1
 #endif

 /*
  * platform power init config
  */

 #define AML_VCCK_INIT_VOLTAGE	  980 	    //VCCK power up voltage
 #define AML_VDDEE_INIT_VOLTAGE    811       // VDDEE power up voltage

 /* SMP Definitinos */
 #define CPU_RELEASE_ADDR		secondary_boot_func

 /* Bootloader Control Block function
    That is used for recovery and the bootloader to talk to each other
   */

 /* Serial config */
 #define CONFIG_CONS_INDEX 2
 #define CONFIG_BAUDRATE  115200

 /*config the default parameters for adc power key*/
 #define AML_ADC_POWER_KEY_CHAN   2  /*channel range: 0-7*/
 #define AML_ADC_POWER_KEY_VAL    0  /*sample value range: 0-1023*/

 /* args/envs */
 #define CONFIG_SYS_MAXARGS  64
 #define CONFIG_EXTRA_ENV_SETTINGS \
         "firstboot=1\0"\
         "jtag=disable\0"\
         "loadaddr=0x00020000\0"\
         "os_ident_addr=0x00500000\0"\
         "loadaddr_rtos=0x00001000\0"\
         "loadaddr_kernel=0x07000000\0"\
         "loadaddr_dspa=0x06000000\0"\
         "ringtone_addr=0x06800000\0"\
         "otg_device=1\0" \
         "usb_burning=adnl\0" \
         "fdt_high=0x10000000\0"\
         "active_slot=_a\0"\
         "boot_part=boot_a\0"\
         "Irq_check_en=0\0"\
         /* partition number in hex */\
         "ringtone_part=1:D\0"\
         "fatload_dev=usb\0"\
         "fs_type=""rootfstype=ramfs""\0"\
         "initargs="\
             "\0"\
         "run_dspa="\
             "unzip 0x6400000 ${loadaddr_dspa};"\
             "if ext4load mmc ${ringtone_part} ${ringtone_addr} ringtone.wav; then ;"\
             "else echo ringtone file not found!;"\
             "fi;"\
             "dspset 0 1 1;dsprun 0 ${loadaddr_dspa}; "\
             "\0"\
         "storeargs="\
             "get_rebootmode;"\
             "get_wake_args;"\
             "get_chiptype;"\
             "if test ${reboot_mode} = fastboot; then "\
                 "setenv reboot_mode warm_reboot;"\
             "fi;"\
             "setenv bootargs ${initargs} otg_device=${otg_device} "\
                 "gpt "\
                 "irq_check_en=${Irq_check_en} "\
                 "hw_id=${hw_id} "\
                 "androidboot.reboot_mode=${reboot_mode} "\
                 "chip_type=${chip_type} "\
                 "androidboot.hardware="__stringify(BOARD_NAME)" "\
                 "androidboot.slot_suffix=${active_slot} "\
                 "androidboot.firstboot=${firstboot} "\
                 "${wake_args} "\
                 "jtag=${jtag};"\
             "setenv bootargs ${bootargs};"\
             "\0"\
         "switch_bootmode="\
             "get_rebootmode;"\
             "if test ${reboot_mode} = factory_boot; then " \
                     "setenv loadaddr ${loadaddr_kernel};"\
                     "if imgread kernel system_b ${loadaddr}; then " \
                         "bootm ${loadaddr};"\
                     "fi;" \
                     "run update;"\
             "else if test ${reboot_mode} = update; then "\
                     "run update;"\
             "else if test ${reboot_mode} = quiescent; then "\
                     "setenv bootargs ${bootargs} androidboot.quiescent=1;"\
             "else if test ${reboot_mode} = cold_boot; then "\
             "fi;fi;fi;fi;"\
             "\0" \
         "storeboot="\
             "setenv loadaddr ${loadaddr_kernel};"\
             "if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;"\
             "echo try upgrade as booting failure; run update;"\
             "\0" \
          "update="\
             /*first usb burning, then udisk recovery(for factory)*/\
             "run usb_burning; "\
             "run recovery_from_udisk;"\
             "\0"\
         "recovery_from_fat_dev="\
             "setenv loadaddr ${loadaddr_kernel};"\
             "if fatload ${fatload_dev} 0 ${loadaddr} recovery.img; then "\
                 "bootm ${loadaddr};fi;"\
             "\0"\
         "recovery_from_udisk="\
             "setenv fatload_dev usb;"\
             "if usb start 0; then run recovery_from_fat_dev; fi;"\
             "\0"\
         "bcb_cmd="\
             "get_valid_slot;"\
             "\0"\
 	"get_hw_id=" \
 	    "get_gq_hw_id;" \
 	    "\0" \
         "oqc_check="\
             "setenv test_mode false;"\
             "setenv fatload_dev usb;"\
             "if usb start 0; then "\
                 "if fatload ${fatload_dev} 0 ${loadaddr} OQC.txt; then "\
                     "setenv test_mode true;"\
                 "fi;"\
             "fi;"\
             "setenv bootargs ${bootargs} androidboot.test_mode=${test_mode};"\
             "\0"\
         "upgrade_and_oqc_key_check="\
             "if gpio input GPIOX_11; then "\
 		"setenv boot_external_image 1;"\
                 "run recovery_from_udisk;"\
 		"setenv boot_external_image 0;"\
                 "run oqc_check;"\
             "fi;"\
             "\0"\

 #ifdef CONFIG_G_AB_SYSTEM
 #define CONFIG_PREBOOT  \
             "run bcb_cmd; "\
             "run run_dspa; "\
             "run get_hw_id;" \
             "run storeargs;"\
             "run upgrade_and_oqc_key_check;"\
             "run switch_bootmode;"

 #else
 #define CONFIG_PREBOOT  \
             "run get_hw_id;" \
             "run storeargs;"\
             "run upgrade_key;"\
             "run switch_bootmode;"
 #endif

 /* #define CONFIG_ENV_IS_NOWHERE  1 */
 #define CONFIG_ENV_SIZE   (8*1024)
 #define CONFIG_FIT 1
 #define CONFIG_OF_LIBFDT 1
 #define CONFIG_ANDROID_BOOT_IMAGE 1
 #define CONFIG_SYS_BOOTM_LEN (64<<20) /* Increase max gunzip size*/

 /* ATTENTION */
 /* DDR configs move to board/amlogic/[board]/firmware/timing.c */

 /* running in sram */
 //#define UBOOT_RUN_IN_SRAM
 #ifdef UBOOT_RUN_IN_SRAM
 #define CONFIG_SYS_INIT_SP_ADDR				(0x00200000)
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN				(256*1024)
 #else
 #define CONFIG_SYS_INIT_SP_ADDR				(0x00200000)
 #define CONFIG_SYS_MALLOC_LEN				(64*1024*1024)
 #endif

 //#define CONFIG_NR_DRAM_BANKS			1
 /* ddr functions */
 #define DDR_FULL_TEST            0 //0:disable, 1:enable. ddr full test
 #define DDR_LOW_POWER            0 //0:disable, 1:enable. ddr clk gate for lp
 #define DDR_ZQ_PD                0 //0:disable, 1:enable. ddr zq power down
 #define DDR_USE_EXT_VREF         0 //0:disable, 1:enable. ddr use external vref
 #define DDR4_TIMING_TEST         0 //0:disable, 1:enable. ddr4 timing test function
 #define DDR_PLL_BYPASS           0 //0:disable, 1:enable. ddr pll bypass function

 /* storage: emmc/nand/sd */
 #define CONFIG_ENV_OVERWRITE
 //#define CONFIG_MESON_NFC
 /* #define 	CONFIG_CMD_SAVEENV */
 /* fixme, need fix*/

 #if (defined(CONFIG_ENV_IS_IN_AMLNAND) || defined(CONFIG_ENV_IS_IN_MMC)) && defined(CONFIG_STORE_COMPATIBLE)
 #error env in amlnand/mmc already be compatible;
 #endif

 /*
 *				storage
 *		|---------|---------|
 *		|					|
 *		emmc<--Compatible-->nand
 *					|-------|-------|
 *					|				|
 *					MTD<-Exclusive->NFTL
 */
 /* axg only support slc nand */
 /* swither for mtd nand which is for slc only. */


 #if defined(CONFIG_AML_NAND) && defined(CONFIG_MESON_NFC)
 #error CONFIG_AML_NAND/CONFIG_MESON_NFC can not support at the sametime;
 #endif

 #if defined(CONFIG_SPI_NAND) && defined(CONFIG_MESON_NFC)
 #error CONFIG_SPI_NAND/CONFIG_MESON_NFC can not support at the sametime;
 #endif

 /* #define		CONFIG_AML_SD_EMMC 1 */
 #ifdef		CONFIG_AML_SD_EMMC
 	#define 	CONFIG_GENERIC_MMC 1
 	#define 	CONFIG_CMD_MMC 1
 	#define CONFIG_CMD_GPT 1
 	#define	CONFIG_SYS_MMC_ENV_DEV 1
 	#define CONFIG_EMMC_DDR52_EN 0
 	#define CONFIG_EMMC_DDR52_CLK 35000000
 #endif
 #define		CONFIG_PARTITIONS 1
 #if 0
 #define 	CONFIG_SYS_NO_FLASH  1
 #endif

 #if defined CONFIG_MESON_NFC || defined CONFIG_SPI_NAND
 	#define CONFIG_CMD_NAND 1
 	#define CONFIG_MTD_DEVICE 1
 	/* #define CONFIG_RBTREE */
 	#define CONFIG_CMD_NAND_TORTURE 1
 	#define CONFIG_CMD_MTDPARTS   1
 	#define CONFIG_MTD_PARTITIONS 1
 	#define CONFIG_SYS_MAX_NAND_DEVICE  2
 	#define CONFIG_SYS_NAND_BASE_LIST   {0}
 #endif

 /* vpu */
 #define AML_VPU_CLK_LEVEL_DFT 7

 /* osd */
 #define OSD_SCALE_ENABLE
 #define AML_OSD_HIGH_VERSION

 /* USB
  * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
  * Enable CONFIG_MUSB_UDD for Device functionalities.
  */
 /* #define CONFIG_MUSB_UDC		1 */
 /* #define CONFIG_CMD_USB 1 */

 #define USB_PHY2_PLL_PARAMETER_1	0x09400414
 #define USB_PHY2_PLL_PARAMETER_2	0x927e0000
 #define USB_PHY2_PLL_PARAMETER_3	0xAC5F49E5

 #define USB_G12x_PHY_PLL_SETTING_1	(0xfe18)
 #define USB_G12x_PHY_PLL_SETTING_2	(0xfff)
 #define USB_G12x_PHY_PLL_SETTING_3	(0x78000)
 #define USB_G12x_PHY_PLL_SETTING_4	(0xe0004)
 #define USB_G12x_PHY_PLL_SETTING_5	(0xe000c)

 #define AML_TXLX_USB        1
 #define AML_USB_V2             1
 #define USB_GENERAL_BIT         3
 #define USB_PHY21_BIT           4

 /* other devices */

 /* commands */

 /*file system*/
 #define CONFIG_DOS_PARTITION 1
 #define CONFIG_EFI_PARTITION 1
 /* #define CONFIG_MMC 1 */
 #define CONFIG_FS_FAT 1
 #define CONFIG_FS_EXT4 1

 /* Cache Definitions */
 /* #define CONFIG_SYS_DCACHE_OFF */
 /* #define CONFIG_SYS_ICACHE_OFF */

 /* other functions */
 #define CONFIG_LIBAVB		1
 /* top hide for NBG file */
 #define CONFIG_SYS_MEM_TOP_HIDE		0x00400000

 #define CONFIG_CPU_ARMV8

 /* #define CONFIG_MULTI_DTB    1 */

 /* support secure boot */
 #define CONFIG_AML_SECURE_UBOOT   1

 #if defined(CONFIG_AML_SECURE_UBOOT)

 /* unify build for generate encrypted bootloader "u-boot.bin.encrypt" */
 #define CONFIG_AML_CRYPTO_UBOOT   1

 /* unify build for generate encrypted kernel image
    SRC : "board/amlogic/(board)/boot.img"
    DST : "fip/boot.img.encrypt" */
 /* #define CONFIG_AML_CRYPTO_IMG       1 */

 #endif /* CONFIG_AML_SECURE_UBOOT */

 #define CONFIG_FIP_IMG_SUPPORT  1

 #endif

	/*
	* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
	*/

	#ifndef __BOARD_CFG_H__
	#define __BOARD_CFG_H__

	#include <asm/arch/cpu.h>

	/* UBOOT Facotry usb burning config */
	#ifndef AML_DISABLE_UPDATE_MODE
	#define CONFIG_AML_V3_FACTORY_BURN 1
	#define CONFIG_AML_V3_USB_TOOl 1
	#define CONFIG_USB_GADGET_DOWNLOAD 1
	#define CONFIG_FASTBOOT_DWC_PCD 1
	#define CONFIG_USB_DEVICE_V2 1
	#endif

	/*
	* platform power init config
	*/

	#define AML_VCCK_INIT_VOLTAGE 980 //VCCK power up voltage
	#define AML_VDDEE_INIT_VOLTAGE 811 // VDDEE power up voltage

	/* SMP Definitinos */
	#define CPU_RELEASE_ADDR secondary_boot_func

	/* Bootloader Control Block function
	That is used for recovery and the bootloader to talk to each other
	*/

	/* Serial config */
	#define CONFIG_CONS_INDEX 2
	#define CONFIG_BAUDRATE 115200

	/config the default parameters for adc power key/
	#define AML_ADC_POWER_KEY_CHAN 2 /channel range: 0-7/
	#define AML_ADC_POWER_KEY_VAL 0 /sample value range: 0-1023/

	/* args/envs */
	#define CONFIG_SYS_MAXARGS 64
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"firstboot=1\0"\
	"jtag=disable\0"\
	"loadaddr=0x00020000\0"\
	"os_ident_addr=0x00500000\0"\
	"loadaddr_rtos=0x00001000\0"\
	"loadaddr_kernel=0x07000000\0"\
	"loadaddr_dspa=0x06000000\0"\
	"ringtone_addr=0x06800000\0"\
	"otg_device=1\0" \
	"usb_burning=adnl\0" \
	"fdt_high=0x10000000\0"\
	"active_slot=_a\0"\
	"boot_part=boot_a\0"\
	"Irq_check_en=0\0"\
	/* partition number in hex */\
	"ringtone_part=1:D\0"\
	"fatload_dev=usb\0"\
	"fs_type=""rootfstype=ramfs""\0"\
	"initargs="\
	"\0"\
	"run_dspa="\
	"unzip 0x6400000 ${loadaddr_dspa};"\
	"if ext4load mmc ${ringtone_part} ${ringtone_addr} ringtone.wav; then ;"\
	"else echo ringtone file not found!;"\
	"fi;"\
	"dspset 0 1 1;dsprun 0 ${loadaddr_dspa}; "\
	"\0"\
	"storeargs="\
	"get_rebootmode;"\
	"get_wake_args;"\
	"get_chiptype;"\
	"if test ${reboot_mode} = fastboot; then "\
	"setenv reboot_mode warm_reboot;"\
	"fi;"\
	"setenv bootargs ${initargs} otg_device=${otg_device} "\
	"gpt "\
	"irq_check_en=${Irq_check_en} "\
	"hw_id=${hw_id} "\
	"androidboot.reboot_mode=${reboot_mode} "\
	"chip_type=${chip_type} "\
	"androidboot.hardware="__stringify(BOARD_NAME)" "\
	"androidboot.slot_suffix=${active_slot} "\
	"androidboot.firstboot=${firstboot} "\
	"${wake_args} "\
	"jtag=${jtag};"\
	"setenv bootargs ${bootargs};"\
	"\0"\
	"switch_bootmode="\
	"get_rebootmode;"\
	"if test ${reboot_mode} = factory_boot; then " \
	"setenv loadaddr ${loadaddr_kernel};"\
	"if imgread kernel system_b ${loadaddr}; then " \
	"bootm ${loadaddr};"\
	"fi;" \
	"run update;"\
	"else if test ${reboot_mode} = update; then "\
	"run update;"\
	"else if test ${reboot_mode} = quiescent; then "\
	"setenv bootargs ${bootargs} androidboot.quiescent=1;"\
	"else if test ${reboot_mode} = cold_boot; then "\
	"fi;fi;fi;fi;"\
	"\0" \
	"storeboot="\
	"setenv loadaddr ${loadaddr_kernel};"\
	"if imgread kernel ${boot_part} ${loadaddr}; then bootm ${loadaddr}; fi;"\
	"echo try upgrade as booting failure; run update;"\
	"\0" \
	"update="\
	/first usb burning, then udisk recovery(for factory)/\
	"run usb_burning; "\
	"run recovery_from_udisk;"\
	"\0"\
	"recovery_from_fat_dev="\
	"setenv loadaddr ${loadaddr_kernel};"\
	"if fatload ${fatload_dev} 0 ${loadaddr} recovery.img; then "\
	"bootm ${loadaddr};fi;"\
	"\0"\
	"recovery_from_udisk="\
	"setenv fatload_dev usb;"\
	"if usb start 0; then run recovery_from_fat_dev; fi;"\
	"\0"\
	"bcb_cmd="\
	"get_valid_slot;"\
	"\0"\
	"get_hw_id=" \
	"get_gq_hw_id;" \
	"\0" \
	"oqc_check="\
	"setenv test_mode false;"\
	"setenv fatload_dev usb;"\
	"if usb start 0; then "\
	"if fatload ${fatload_dev} 0 ${loadaddr} OQC.txt; then "\
	"setenv test_mode true;"\
	"fi;"\
	"fi;"\
	"setenv bootargs ${bootargs} androidboot.test_mode=${test_mode};"\
	"\0"\
	"upgrade_and_oqc_key_check="\
	"if gpio input GPIOX_11; then "\
	"setenv boot_external_image 1;"\
	"run recovery_from_udisk;"\
	"setenv boot_external_image 0;"\
	"run oqc_check;"\
	"fi;"\
	"\0"\

	#ifdef CONFIG_G_AB_SYSTEM
	#define CONFIG_PREBOOT \
	"run bcb_cmd; "\
	"run run_dspa; "\
	"run get_hw_id;" \
	"run storeargs;"\
	"run upgrade_and_oqc_key_check;"\
	"run switch_bootmode;"

	#else
	#define CONFIG_PREBOOT \
	"run get_hw_id;" \
	"run storeargs;"\
	"run upgrade_key;"\
	"run switch_bootmode;"
	#endif

	/* #define CONFIG_ENV_IS_NOWHERE 1 */
	#define CONFIG_ENV_SIZE (8*1024)
	#define CONFIG_FIT 1
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_ANDROID_BOOT_IMAGE 1
	#define CONFIG_SYS_BOOTM_LEN (64<<20) /* Increase max gunzip size*/

	/* ATTENTION */
	/* DDR configs move to board/amlogic/[board]/firmware/timing.c */

	/* running in sram */
	//#define UBOOT_RUN_IN_SRAM
	#ifdef UBOOT_RUN_IN_SRAM
	#define CONFIG_SYS_INIT_SP_ADDR (0x00200000)
	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (256*1024)
	#else
	#define CONFIG_SYS_INIT_SP_ADDR (0x00200000)
	#define CONFIG_SYS_MALLOC_LEN (6410241024)
	#endif

	//#define CONFIG_NR_DRAM_BANKS 1
	/* ddr functions */
	#define DDR_FULL_TEST 0 //0:disable, 1:enable. ddr full test
	#define DDR_LOW_POWER 0 //0:disable, 1:enable. ddr clk gate for lp
	#define DDR_ZQ_PD 0 //0:disable, 1:enable. ddr zq power down
	#define DDR_USE_EXT_VREF 0 //0:disable, 1:enable. ddr use external vref
	#define DDR4_TIMING_TEST 0 //0:disable, 1:enable. ddr4 timing test function
	#define DDR_PLL_BYPASS 0 //0:disable, 1:enable. ddr pll bypass function

	/* storage: emmc/nand/sd */
	#define CONFIG_ENV_OVERWRITE
	//#define CONFIG_MESON_NFC
	/* #define CONFIG_CMD_SAVEENV */
	/* fixme, need fix*/

	#if (defined(CONFIG_ENV_IS_IN_AMLNAND) \|\| defined(CONFIG_ENV_IS_IN_MMC)) && defined(CONFIG_STORE_COMPATIBLE)
	#error env in amlnand/mmc already be compatible;
	#endif

	/*
	* storage
	* \|---------\|---------\|
	* \| \|
	* emmc<--Compatible-->nand
	* \|-------\|-------\|
	* \| \|
	* MTD<-Exclusive->NFTL
	*/
	/* axg only support slc nand */
	/* swither for mtd nand which is for slc only. */


	#if defined(CONFIG_AML_NAND) && defined(CONFIG_MESON_NFC)
	#error CONFIG_AML_NAND/CONFIG_MESON_NFC can not support at the sametime;
	#endif

	#if defined(CONFIG_SPI_NAND) && defined(CONFIG_MESON_NFC)
	#error CONFIG_SPI_NAND/CONFIG_MESON_NFC can not support at the sametime;
	#endif

	/* #define CONFIG_AML_SD_EMMC 1 */
	#ifdef CONFIG_AML_SD_EMMC
	#define CONFIG_GENERIC_MMC 1
	#define CONFIG_CMD_MMC 1
	#define CONFIG_CMD_GPT 1
	#define CONFIG_SYS_MMC_ENV_DEV 1
	#define CONFIG_EMMC_DDR52_EN 0
	#define CONFIG_EMMC_DDR52_CLK 35000000
	#endif
	#define CONFIG_PARTITIONS 1
	#if 0
	#define CONFIG_SYS_NO_FLASH 1
	#endif

	#if defined CONFIG_MESON_NFC \|\| defined CONFIG_SPI_NAND
	#define CONFIG_CMD_NAND 1
	#define CONFIG_MTD_DEVICE 1
	/* #define CONFIG_RBTREE */
	#define CONFIG_CMD_NAND_TORTURE 1
	#define CONFIG_CMD_MTDPARTS 1
	#define CONFIG_MTD_PARTITIONS 1
	#define CONFIG_SYS_MAX_NAND_DEVICE 2
	#define CONFIG_SYS_NAND_BASE_LIST {0}
	#endif

	/* vpu */
	#define AML_VPU_CLK_LEVEL_DFT 7

	/* osd */
	#define OSD_SCALE_ENABLE
	#define AML_OSD_HIGH_VERSION

	/* USB
	* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
	* Enable CONFIG_MUSB_UDD for Device functionalities.
	*/
	/* #define CONFIG_MUSB_UDC 1 */
	/* #define CONFIG_CMD_USB 1 */

	#define USB_PHY2_PLL_PARAMETER_1 0x09400414
	#define USB_PHY2_PLL_PARAMETER_2 0x927e0000
	#define USB_PHY2_PLL_PARAMETER_3 0xAC5F49E5

	#define USB_G12x_PHY_PLL_SETTING_1 (0xfe18)
	#define USB_G12x_PHY_PLL_SETTING_2 (0xfff)
	#define USB_G12x_PHY_PLL_SETTING_3 (0x78000)
	#define USB_G12x_PHY_PLL_SETTING_4 (0xe0004)
	#define USB_G12x_PHY_PLL_SETTING_5 (0xe000c)

	#define AML_TXLX_USB 1
	#define AML_USB_V2 1
	#define USB_GENERAL_BIT 3
	#define USB_PHY21_BIT 4

	/* other devices */

	/* commands */

	/file system/
	#define CONFIG_DOS_PARTITION 1
	#define CONFIG_EFI_PARTITION 1
	/* #define CONFIG_MMC 1 */
	#define CONFIG_FS_FAT 1
	#define CONFIG_FS_EXT4 1

	/* Cache Definitions */
	/* #define CONFIG_SYS_DCACHE_OFF */
	/* #define CONFIG_SYS_ICACHE_OFF */

	/* other functions */
	#define CONFIG_LIBAVB 1
	/* top hide for NBG file */
	#define CONFIG_SYS_MEM_TOP_HIDE 0x00400000

	#define CONFIG_CPU_ARMV8

	/* #define CONFIG_MULTI_DTB 1 */

	/* support secure boot */
	#define CONFIG_AML_SECURE_UBOOT 1

	#if defined(CONFIG_AML_SECURE_UBOOT)

	/* unify build for generate encrypted bootloader "u-boot.bin.encrypt" */
	#define CONFIG_AML_CRYPTO_UBOOT 1

	/* unify build for generate encrypted kernel image
	SRC : "board/amlogic/(board)/boot.img"
	DST : "fip/boot.img.encrypt" */
	/* #define CONFIG_AML_CRYPTO_IMG 1 */

	#endif /* CONFIG_AML_SECURE_UBOOT */

	#define CONFIG_FIP_IMG_SUPPORT 1

	#endif