blob: d8383170d2fadab375d1eba2cc5064dd8a6f6e12 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 DENX Software Engineering
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
*/
#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/sys_proto.h>
#include <errno.h>
#include <asm/gpio.h>
#include <malloc.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/spi.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
#include <i2c.h>
#include <environment.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <dm/platdata.h>
#ifndef CONFIG_MXC_SPI
#error "CONFIG_SPI must be set for this board"
#error "Please check your config file"
#endif
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
static bool hw_ids_valid;
static bool sw_ids_valid;
static u32 cpu_id;
static u32 unit_id;
#define EM_PAD IMX_GPIO_NR(3, 29)
#define SW0 IMX_GPIO_NR(2, 4)
#define SW1 IMX_GPIO_NR(2, 5)
#define SW2 IMX_GPIO_NR(2, 6)
#define SW3 IMX_GPIO_NR(2, 7)
#define HW0 IMX_GPIO_NR(6, 7)
#define HW1 IMX_GPIO_NR(6, 9)
#define HW2 IMX_GPIO_NR(6, 10)
#define HW3 IMX_GPIO_NR(6, 11)
#define HW4 IMX_GPIO_NR(4, 7)
#define HW5 IMX_GPIO_NR(4, 11)
#define HW6 IMX_GPIO_NR(4, 13)
#define HW7 IMX_GPIO_NR(4, 15)
int gpio_table_sw_ids[] = {
SW0, SW1, SW2, SW3
};
const char *gpio_table_sw_ids_names[] = {
"sw0", "sw1", "sw2", "sw3"
};
int gpio_table_hw_ids[] = {
HW0, HW1, HW2, HW3, HW4, HW5, HW6, HW7
};
const char *gpio_table_hw_ids_names[] = {
"hw0", "hw1", "hw2", "hw3", "hw4", "hw5", "hw6", "hw7"
};
static int get_board_id(int *ids, const char **c, int size,
bool *valid, u32 *id)
{
int i, ret, val;
*valid = false;
for (i = 0; i < size; i++) {
ret = gpio_request(ids[i], c[i]);
if (ret) {
printf("Can't request SWx gpios\n");
return ret;
}
}
for (i = 0; i < size; i++) {
ret = gpio_direction_input(ids[i]);
if (ret) {
printf("Can't set SWx gpios direction\n");
return ret;
}
}
for (i = 0; i < size; i++) {
val = gpio_get_value(ids[i]);
if (val < 0) {
printf("Can't get SW%d ID\n", i);
*id = 0;
return val;
}
*id |= val << i;
}
*valid = true;
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1: TFA9879 */
struct i2c_pads_info i2c_pad_info0 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
.gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
/* I2C2: TIVO TM4C123 */
struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
.gp = IMX_GPIO_NR(2, 30)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
.gp = IMX_GPIO_NR(3, 16)
}
};
/* I2C3: PMIC PF0100, EEPROM AT24C256C */
struct i2c_pads_info i2c_pad_info2 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
.gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
.gp = IMX_GPIO_NR(3, 17)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
.gp = IMX_GPIO_NR(3, 18)
}
};
iomux_v3_cfg_t const misc_pads[] = {
/* Prod ID GPIO pins */
MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_D7__GPIO2_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* HW revision GPIO pins */
MX6_PAD_NANDF_CLE__GPIO6_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_KEY_ROW3__GPIO4_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* XTALOSC */
MX6_PAD_GPIO_3__XTALOSC_REF_CLK_24M | MUX_PAD_CTRL(NO_PAD_CTRL),
/* Emergency recovery pin */
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg usdhc_cfg[1] = {
{ USDHC4_BASE_ADDR, 0, 8, },
};
int board_mmc_getcd(struct mmc *mmc)
{
return 1;
}
int board_mmc_init(bd_t *bis)
{
displ5_set_iomux_usdhc();
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
#endif /* CONFIG_FSL_ESDHC */
static void displ5_setup_ecspi(void)
{
int ret;
displ5_set_iomux_ecspi();
ret = gpio_request(IMX_GPIO_NR(5, 29), "spi2_cs0");
if (!ret)
gpio_direction_output(IMX_GPIO_NR(5, 29), 1);
ret = gpio_request(IMX_GPIO_NR(7, 0), "spi2_#wp");
if (!ret)
gpio_direction_output(IMX_GPIO_NR(7, 0), 1);
}
#ifdef CONFIG_FEC_MXC
iomux_v3_cfg_t const enet_pads[] = {
MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
/* for old evalboard with R159 present and R160 not populated */
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
/*INT#_GBE*/
MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_enet(void)
{
SETUP_IOMUX_PADS(enet_pads);
gpio_direction_input(IMX_GPIO_NR(1, 28)); /*INT#_GBE*/
}
static int setup_mac_from_fuse(void)
{
unsigned char enetaddr[6];
int ret;
ret = eth_env_get_enetaddr("ethaddr", enetaddr);
if (ret) /* ethaddr is already set */
return 0;
imx_get_mac_from_fuse(0, enetaddr);
if (is_valid_ethaddr(enetaddr)) {
eth_env_set_enetaddr("ethaddr", enetaddr);
return 0;
}
return 0;
}
int board_eth_init(bd_t *bd)
{
struct phy_device *phydev;
struct mii_dev *bus;
int ret;
setup_iomux_enet();
iomuxc_set_rgmii_io_voltage(DDR_SEL_1P5V_IO);
ret = enable_fec_anatop_clock(0, ENET_125MHZ);
if (ret)
return ret;
setup_mac_from_fuse();
bus = fec_get_miibus(IMX_FEC_BASE, -1);
if (!bus)
return -ENODEV;
/*
* We use here the "rgmii-id" mode of operation and allow M88E1512
* PHY to use its internally callibrated RX/TX delays
*/
phydev = phy_find_by_mask(bus, 0xffffffff /* (0xf << 4) */,
PHY_INTERFACE_MODE_RGMII_ID);
if (!phydev) {
ret = -ENODEV;
goto err_phy;
}
/* display5 due to PCB routing can only work with 100 Mbps */
phydev->advertising &= ~(ADVERTISED_1000baseX_Half |
ADVERTISED_1000baseX_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ret = fec_probe(bd, -1, IMX_FEC_BASE, bus, phydev);
if (ret)
goto err_sw;
return 0;
err_sw:
free(phydev);
err_phy:
mdio_unregister(bus);
free(bus);
return ret;
}
#endif /* CONFIG_FEC_MXC */
/*
* Do not overwrite the console
* Always use serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
fdt_fixup_ethernet(blob);
return 0;
}
#endif
int board_init(void)
{
debug("board init\n");
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/* Setup iomux for non console UARTS */
displ5_set_iomux_uart();
displ5_setup_ecspi();
SETUP_IOMUX_PADS(misc_pads);
get_board_id(gpio_table_sw_ids, &gpio_table_sw_ids_names[0],
ARRAY_SIZE(gpio_table_sw_ids), &sw_ids_valid, &unit_id);
debug("SWx unit_id 0x%x\n", unit_id);
get_board_id(gpio_table_hw_ids, &gpio_table_hw_ids_names[0],
ARRAY_SIZE(gpio_table_hw_ids), &hw_ids_valid, &cpu_id);
debug("HWx cpu_id 0x%x\n", cpu_id);
if (hw_ids_valid && sw_ids_valid)
printf("ID: unit type 0x%x rev 0x%x\n", unit_id, cpu_id);
udelay(25);
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
return 0;
}
#ifdef CONFIG_CMD_BMODE
static const struct boot_mode board_boot_modes[] = {
/* eMMC, USDHC-4, 8-bit bus width */
/* SPI-NOR, ECSPI-2 SS0, 3-bytes addressing */
{"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
{"spinor", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x09)},
{NULL, 0},
};
static void setup_boot_modes(void)
{
add_board_boot_modes(board_boot_modes);
}
#else
static inline void setup_boot_modes(void) {}
#endif
int misc_init_r(void)
{
int ret;
setup_boot_modes();
ret = gpio_request(EM_PAD, "Emergency_PAD");
if (ret) {
printf("Can't request emergency PAD gpio\n");
return ret;
}
ret = gpio_direction_input(EM_PAD);
if (ret) {
printf("Can't set emergency PAD direction\n");
return ret;
}
return 0;
}
static struct mxc_serial_platdata mxc_serial_plat = {
.reg = (struct mxc_uart *)UART5_BASE,
};
U_BOOT_DEVICE(mxc_serial) = {
.name = "serial_mxc",
.platdata = &mxc_serial_plat,
};