| /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ |
| /* |
| * Copyright (c) 2019 Amlogic, Inc. All rights reserved. |
| */ |
| |
| #ifndef _CPU_H |
| #define _CPU_H |
| /* #include <config.h> */ |
| /* #include <asm/plat-cpu.h> */ |
| /* #include <asm/arch/ddr.h> */ |
| |
| #if 0 |
| #define CONFIG_AML_MESON 1 |
| #define CONFIG_AML_MESON_GX 1 |
| #define CONFIG_AML_MESON_G12A 1 |
| #endif |
| |
| /*enable viu probe*/ |
| #if 0 |
| #define CONFIG_CMD_VIU_PROBE 1 |
| #endif |
| |
| /* for uboot envrionment use */ |
| /* #define CONFIG_DDR_SIZE 256 */ |
| |
| /* dram */ |
| #ifdef CONFIG_UBOOT_RUN_IN_SRAM |
| #define PHYS_SDRAM_1_BASE 0xFFE00000UL |
| #define PHYS_SDRAM_1_SIZE 0x00180000UL |
| #else |
| #define PHYS_SDRAM_1_BASE 0x00000000UL |
| #define PHYS_SDRAM_1_SIZE 0x10000000UL |
| #endif |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1_BASE |
| |
| #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1_BASE + CONFIG_SYS_TEXT_BASE) |
| |
| /* console/print buffer */ |
| #define CONFIG_SYS_CBSIZE 512 |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| |
| /* Generic Timer Definitions */ |
| #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ |
| |
| /* use "hush" command parser */ |
| #if 0 |
| #define CONFIG_SYS_HUSH_PARSER |
| #endif |
| |
| #if 0 |
| #define CONFIG_DTB_MEM_ADDR 0x1000000 |
| #endif |
| |
| #if 0 |
| #define CONFIG_AML_CUSTOMER_ID (0) |
| #endif |
| |
| #define AML_CUSTOMER_ID (0) |
| |
| /* #define CONFIG_SILENT_CONSOLE */ |
| #define CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC |
| #define CONFIG_SILENT_U_BOOT_ONLY |
| |
| /* 2018.03.19 new compress solution, only support BL33 LZ4 compress */ |
| #define CONFIG_AML_BL33_COMPRESS_ENABLE 1 |
| |
| /* 2018.03.19 G12A only support v3 format for normal & secure boot */ |
| #define CONFIG_AML_SECURE_BOOT_V3 1 |
| |
| #define NR_CPUS 4 |
| |
| #define CPU_ID_REG SYSCTRL_SEC_STATUS_REG0 |
| #define PACKAGE_ID_MASK 0xFF |
| |
| /*A1 SoC has problem to support AES for secure boot, here just disable it*/ |
| //#define CONFIG_AML_CRYPTO_AES 1 |
| |
| |
| /*Flag for enable AES key generate to EFUSE pattern, with this flag only |
| AES key will be generated to EFUSE pattern, it can be used for use case |
| like the AES key not ready when secure boot enabled for the first time. |
| */ |
| |
| //#define CONFIG_AML_EFUSE_GEN_AES_ONLY 1 |
| |
| #endif /* _CPU_H */ |
