blob: 5febbdbc2569f2473de92da1435472dff1ecfad7 [file] [log] [blame]
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
/*
* arch/arm/include/asm/arch-gxl/uart.h
*
* Copyright (C) 2020 Amlogic, Inc. All rights reserved.
*
*/
#ifndef __MESON_FIRM_UART_H_
#define __MESON_FIRM_UART_H_
#include <config.h>
#include <common.h>
#include "register.h"
//#include "io.h"
#include <asm/arch/secure_apb.h>
#ifndef CONFIG_CONS_INDEX
#error Please define CONFIG_CONS_INDEX==[0|1]
#endif
#if CONFIG_CONS_INDEX==0
#define UART_PORT_CONS UART_PORT_0
#elif CONFIG_CONS_INDEX==1
#define UART_PORT_CONS UART_PORT_1
#elif CONFIG_CONS_INDEX==2
#define UART_PORT_CONS UART_PORT_AO
#define USE_AO_UART 1
#else
#error Please define CONFIG_CONS_INDEX==[0|1]
#endif
/*
#define UART_PORT_0 CBUS_REG_ADDR(UART0_WFIFO)
#define UART_PORT_1 CBUS_REG_ADDR(UART1_WFIFO)
#define UART_PORT_2 CBUS_REG_ADDR(UART2_WFIFO)
#define UART_PORT_AO P_AO_UART_WFIFO
#define UART_WFIFO (0<<2)
#define UART_RFIFO (1<<2)
#define UART_CONTROL (2<<2)
#define UART_STATUS (3<<2)
#define UART_MISC (4<<2)
*/
#include "clock.h"
#define UART_CLK_SRC CLK81
#define UART_PORT_0 UART0_WFIFO
#define UART_PORT_1 UART1_WFIFO
#define UART_PORT_AO AO_UART_WFIFO
#define UART_WFIFO 0
#define UART_RFIFO 1
#define UART_CONTROL 2
#define UART_STATUS 3
#define UART_MISC 4
#if USE_AO_UART == 1
#define P_UART(uart_base,reg) (uart_base + (reg<<2))
#else
#define P_UART(uart_base,reg) CBUS_REG_ADDR(uart_base+reg)
#endif
#define P_UART_WFIFO(uart_base) P_UART(uart_base,UART_WFIFO)
#define P_UART_RFIFO(uart_base) P_UART(uart_base,UART_RFIFO)
#define P_UART_CONTROL(uart_base) P_UART(uart_base,UART_CONTROL)
#define UART_CNTL_MASK_BAUD_RATE (0xfff)
#define UART_CNTL_MASK_TX_EN (1<<12)
#define UART_CNTL_MASK_RX_EN (1<<13)
#define UART_CNTL_MASK_2WIRE (1<<15)
#define UART_CNTL_MASK_STP_BITS (3<<16)
#define UART_CNTL_MASK_STP_1BIT (0<<16)
#define UART_CNTL_MASK_STP_2BIT (1<<16)
#define UART_CNTL_MASK_PRTY_EVEN (0<<18)
#define UART_CNTL_MASK_PRTY_ODD (1<<18)
#define UART_CNTL_MASK_PRTY_TYPE (1<<18)
#define UART_CNTL_MASK_PRTY_EN (1<<19)
#define UART_CNTL_MASK_CHAR_LEN (3<<20)
#define UART_CNTL_MASK_CHAR_8BIT (0<<20)
#define UART_CNTL_MASK_CHAR_7BIT (1<<20)
#define UART_CNTL_MASK_CHAR_6BIT (2<<20)
#define UART_CNTL_MASK_CHAR_5BIT (3<<20)
#define UART_CNTL_MASK_RST_TX (1<<22)
#define UART_CNTL_MASK_RST_RX (1<<23)
#define UART_CNTL_MASK_CLR_ERR (1<<24)
#define UART_CNTL_MASK_INV_RX (1<<25)
#define UART_CNTL_MASK_INV_TX (1<<26)
#define UART_CNTL_MASK_RINT_EN (1<<27)
#define UART_CNTL_MASK_TINT_EN (1<<28)
#define UART_CNTL_MASK_INV_CTS (1<<29)
#define UART_CNTL_MASK_MASK_ERR (1<<30)
#define UART_CNTL_MASK_INV_RTS (1<<31)
#define P_UART_STATUS(uart_base) P_UART(uart_base,UART_STATUS )
#define UART_STAT_MASK_RFIFO_CNT (0x7f<<0)
#define UART_STAT_MASK_TFIFO_CNT (0x7f<<8)
#define UART_STAT_MASK_PRTY_ERR (1<<16)
#define UART_STAT_MASK_FRAM_ERR (1<<17)
#define UART_STAT_MASK_WFULL_ERR (1<<18)
#define UART_STAT_MASK_RFIFO_FULL (1<<19)
#define UART_STAT_MASK_RFIFO_EMPTY (1<<20)
#define UART_STAT_MASK_TFIFO_FULL (1<<21)
#define UART_STAT_MASK_TFIFO_EMPTY (1<<22)
#define UART_STAT_MASK_XMIT_BUSY (1<<25)
#define UART_STAT_MASK_RECV_BUSY (1<<26)
#define P_UART_MISC(uart_base) P_UART(uart_base,UART_MISC )
#ifndef CONFIG_SERIAL_STP_BITS
#define CONFIG_SERIAL_STP_BITS 1 // 1 , 2
#endif
#if CONFIG_SERIAL_STP_BITS==1
#define UART_STP_BIT UART_CNTL_MASK_STP_1BIT
#elif CONFIG_SERIAL_STP_BITS==2
#define UART_STP_BIT UART_CNTL_MASK_STP_2BIT
#else
#error CONFIG_SERIAL_STP_BITS wrong
#endif
#ifndef CONFIG_SERIAL_PRTY_TYPE
#define CONFIG_SERIAL_PRTY_TYPE 0 //0 ,2 ,3
#endif
#if CONFIG_SERIAL_PRTY_TYPE==0
#define UART_PRTY_BIT 0
#elif CONFIG_SERIAL_PRTY_TYPE==2
#define UART_PRTY_BIT (UART_CNTL_MASK_PRTY_EN|UART_CNTL_MASK_PRTY_EVEN)
#elif CONFIG_SERIAL_PRTY_TYPE==3
#define UART_PRTY_BIT (UART_CNTL_MASK_PRTY_EN|UART_CNTL_MASK_PRTY_ODD)
#else
#error CONFIG_SERIAL_PRTY_TYPE wrong
#endif
#ifndef CONFIG_SERIAL_CHAR_LEN
#define CONFIG_SERIAL_CHAR_LEN 8 //5,6,7,8
#endif
#if CONFIG_SERIAL_CHAR_LEN==5
#define UART_CHAR_LEN UART_CNTL_MASK_CHAR_5BIT
#elif CONFIG_SERIAL_CHAR_LEN==6
#define UART_CHAR_LEN UART_CNTL_MASK_CHAR_6BIT
#elif CONFIG_SERIAL_CHAR_LEN==7
#define UART_CHAR_LEN UART_CNTL_MASK_CHAR_7BIT
#elif CONFIG_SERIAL_CHAR_LEN==8
#define UART_CHAR_LEN UART_CNTL_MASK_CHAR_8BIT
#else
#error CONFIG_SERIAL_CHAR_LEN wrong
#endif
#define UART_CONTROL_SET(baud,clk81) \
(((clk81)/(baud*4) -1) \
| UART_STP_BIT \
| UART_PRTY_BIT \
| UART_CHAR_LEN \
| UART_CNTL_MASK_TX_EN \
| UART_CNTL_MASK_RX_EN \
| UART_CNTL_MASK_RST_TX \
| UART_CNTL_MASK_RST_RX \
| UART_CNTL_MASK_CLR_ERR )
#endif