| # SPDX-License-Identifier: GPL-2.0+ | |
| obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ | |
| obj-$(CONFIG_$(SPL_TPL_)DM) += core/ | |
| obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/ | |
| obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ | |
| obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ | |
| obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ | |
| obj-$(CONFIG_$(SPL_TPL_)LED) += led/ | |
| obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/ | |
| obj-$(CONFIG_$(SPL_TPL_)CMD_JTAG) += jtag/ | |
| obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/ | |
| obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/ | |
| obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/ | |
| obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ | |
| obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ | |
| obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ | |
| obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/ | |
| obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ | |
| obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/ | |
| obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ | |
| obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ | |
| obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/ | |
| obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/ | |
| obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/ | |
| obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ | |
| obj-$(CONFIG_AML_V2_FACTORY_BURN) += usb/gadget/v2_burning/ | |
| obj-$(CONFIG_AML_V3_FACTORY_BURN) += usb/gadget/v3_burning/ | |
| obj-$(CONFIG_AML_NAND) += nand/ | |
| obj-$(CONFIG_AML_DRIVER) += amlogic/ | |
| obj-$(CONFIG_SPI_NAND) += mtd/nand/spi-nand/ | |
| obj-$(CONFIG_MESON_NFC) += mtd/nand/raw/aml_nand/ | |
| obj-$(CONFIG_TYPEC) += usb/typec/ | |
| obj-$(CONFIG_USB_ROLE_SWITCH) += usb/roles/ | |
| ifndef CONFIG_TPL_BUILD | |
| ifdef CONFIG_SPL_BUILD | |
| obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/ | |
| obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/ | |
| obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/ | |
| obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ | |
| obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ | |
| obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ | |
| obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ | |
| obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/ | |
| obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ | |
| obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ | |
| obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/ | |
| obj-$(CONFIG_SPL_DM_RESET) += reset/ | |
| obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ | |
| obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ | |
| obj-$(CONFIG_SPL_UBI) += mtd/ubispl/ | |
| obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ | |
| obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ | |
| obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ | |
| obj-$(CONFIG_SPL_USB_ETHER) += net/phy/ | |
| obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ | |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/ | |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/common/ | |
| obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/ | |
| obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/ | |
| obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ | |
| obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ | |
| obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ | |
| obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/ | |
| obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/ | |
| obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/ | |
| obj-$(CONFIG_SPL_THERMAL) += thermal/ | |
| endif | |
| endif | |
| ifdef CONFIG_TPL_BUILD | |
| obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ | |
| endif | |
| ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) | |
| obj-y += adc/ | |
| obj-y += ata/ | |
| obj-$(CONFIG_DM_DEMO) += demo/ | |
| obj-$(CONFIG_BIOSEMU) += bios_emulator/ | |
| obj-y += block/ | |
| obj-y += board/ | |
| obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ | |
| obj-$(CONFIG_CPU) += cpu/ | |
| obj-y += crypto/ | |
| obj-$(CONFIG_FASTBOOT) += fastboot/ | |
| obj-y += firmware/ | |
| obj-$(CONFIG_FPGA) += fpga/ | |
| obj-y += misc/ | |
| obj-$(CONFIG_MMC) += mmc/ | |
| obj-$(CONFIG_NVME) += nvme/ | |
| obj-y += pcmcia/ | |
| obj-y += dfu/ | |
| obj-$(CONFIG_X86) += pch/ | |
| obj-y += phy/allwinner/ | |
| obj-y += phy/marvell/ | |
| obj-y += rtc/ | |
| obj-y += scsi/ | |
| obj-y += sound/ | |
| obj-y += spmi/ | |
| obj-y += sysreset/ | |
| obj-y += video/ | |
| obj-y += watchdog/ | |
| obj-$(CONFIG_QE) += qe/ | |
| obj-$(CONFIG_U_QE) += qe/ | |
| obj-y += mailbox/ | |
| obj-y += memory/ | |
| obj-y += pwm/ | |
| obj-y += reset/ | |
| obj-y += input/ | |
| # SOC specific infrastructure drivers. | |
| obj-y += smem/ | |
| obj-y += soc/ | |
| obj-y += thermal/ | |
| obj-$(CONFIG_TEE) += tee/ | |
| obj-y += axi/ | |
| obj-$(CONFIG_W1) += w1/ | |
| obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ | |
| obj-$(CONFIG_EFUSE) += efuse/ | |
| obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ | |
| obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/ | |
| endif |