| Overview |
| -------- |
| The T1040RDB is a Freescale reference board that hosts the T1040 SoC |
| (and variants). Variants inclued T1042 presonality of T1040, in which |
| case T1040RDB can also be called T1042RDB. |
| |
| The T1042RDB is a Freescale reference board that hosts the T1042 SoC |
| (and variants). The board is similar to T1040RDB, T1040 is a reduced |
| personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). |
| |
| The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. |
| (a personality of T1040 SoC). The board is similar to T1040RDB but is |
| designed specially with low power features targeted for Printing Image Market. |
| |
| Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB |
| ------------------------------------------------------------------------- |
| Board Si Protocol Targeted Market |
| ------------------------------------------------------------------------- |
| T1040RDB T1040 0x66 Networking |
| T1040RDB T1042 0x86 Networking |
| T1042RDB_PI T1042 0x06 Printing & Imaging |
| |
| |
| T1040 SoC Overview |
| ------------------ |
| The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA |
| processor cores with high-performance data path acceleration architecture |
| and network peripheral interfaces required for networking & telecommunications. |
| |
| The T1040/T1042 SoC includes the following function and features: |
| |
| - Four e5500 cores, each with a private 256 KB L2 cache |
| - 256 KB shared L3 CoreNet platform cache (CPC) |
| - Interconnect CoreNet platform |
| - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving |
| support |
| - Data Path Acceleration Architecture (DPAA) incorporating acceleration |
| for the following functions: |
| - Packet parsing, classification, and distribution |
| - Queue management for scheduling, packet sequencing, and congestion |
| management |
| - Cryptography Acceleration (SEC 5.0) |
| - RegEx Pattern Matching Acceleration (PME 2.2) |
| - IEEE Std 1588 support |
| - Hardware buffer management for buffer allocation and deallocation |
| - Ethernet interfaces |
| - Integrated 8-port Gigabit Ethernet switch (T1040 only) |
| - Four 1 Gbps Ethernet controllers |
| - Two RGMII interfaces or one RGMII and one MII interfaces |
| - High speed peripheral interfaces |
| - Four PCI Express 2.0 controllers running at up to 5 GHz |
| - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation |
| - Upto two QSGMII interface |
| - Upto six SGMII interface supporting 1000 Mbps |
| - One SGMII interface supporting upto 2500 Mbps |
| - Additional peripheral interfaces |
| - Two USB 2.0 controllers with integrated PHY |
| - SD/eSDHC/eMMC |
| - eSPI controller |
| - Four I2C controllers |
| - Four UARTs |
| - Four GPIO controllers |
| - Integrated flash controller (IFC) |
| - LCD and HDMI interface (DIU) with 12 bit dual data rate |
| - TDM interface |
| - Multicore programmable interrupt controller (PIC) |
| - Two 8-channel DMA engines |
| - Single source clocking implementation |
| - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) |
| |
| T1040 SoC Personalities |
| ------------------------- |
| |
| T1022 Personality: |
| T1022 is a reduced personality of T1040 with less core/clusters. |
| |
| T1042 Personality: |
| T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit |
| Ethernet switch. Rest of the blocks are same as T1040 |
| |
| |
| T1040RDB board Overview |
| ------------------------- |
| - SERDES Connections, 8 lanes information: |
| 1: None |
| 2: SGMII |
| 3: QSGMII |
| 4: QSGMII |
| 5: PCIe1 x1 slot |
| 6: mini PCIe connector |
| 7: mini PCIe connector |
| 8: SATA connector |
| - DDR Controller |
| - Supports rates of up to 1600 MHz data-rate |
| - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. |
| - IFC/Local Bus |
| - NAND flash: 1GB 8-bit NAND flash |
| - NOR: 128MB 16-bit NOR Flash |
| - Ethernet |
| - Two on-board RGMII 10/100/1G ethernet ports. |
| - CPLD |
| - Clocks |
| - System and DDR clock (SYSCLK, “DDRCLK”) |
| - SERDES clocks |
| - Power Supplies |
| - USB |
| - Supports two USB 2.0 ports with integrated PHYs |
| - Two type A ports with 5V@1.5A per port. |
| - SDHC |
| - SDHC/SDXC connector |
| - SPI |
| - On-board 64MB SPI flash |
| - Other IO |
| - Two Serial ports |
| - Four I2C ports |
| |
| T1042RDB_PI board Overview |
| ------------------------- |
| - SERDES Connections, 8 lanes information: |
| 1, 2, 3, 4 : PCIe x4 slot |
| 5: mini PCIe connector |
| 6: mini PCIe connector |
| 7: NA |
| 8: SATA connector |
| - DDR Controller |
| - Supports rates of up to 1600 MHz data-rate |
| - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. |
| - IFC/Local Bus |
| - NAND flash: 1GB 8-bit NAND flash |
| - NOR: 128MB 16-bit NOR Flash |
| - Ethernet |
| - Two on-board RGMII 10/100/1G ethernet ports. |
| - CPLD |
| - Clocks |
| - System and DDR clock (SYSCLK, “DDRCLK”) |
| - SERDES clocks |
| - Video |
| - DIU supports video at up to 1280x1024x32bpp |
| - Power Supplies |
| - USB |
| - Supports two USB 2.0 ports with integrated PHYs |
| - Two type A ports with 5V@1.5A per port. |
| - SDHC |
| - SDHC/SDXC connector |
| - SPI |
| - On-board 64MB SPI flash |
| - Other IO |
| - Two Serial ports |
| - Four I2C ports |
| |
| Memory map |
| ----------- |
| The addresses in brackets are physical addresses. |
| |
| Start Address End Address Description Size |
| 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB |
| 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB |
| 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB |
| 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB |
| 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB |
| 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB |
| 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB |
| 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB |
| 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB |
| 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB |
| 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB |
| 0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB |
| 0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB |
| 0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB |
| 0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB |
| 0x0_0000_0000 0x0_ffff_ffff DDR 2GB |
| |
| |
| NOR Flash memory Map |
| --------------------- |
| Start End Definition Size |
| 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB |
| 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB |
| 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB |
| 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB |
| 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB |
| 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB |
| 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB |
| 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB |
| 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB |
| 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB |
| 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB |
| 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB |
| 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB |
| 0xE8000000 0xE801FFFF RCW (current bank) 128KB |
| |
| |
| Various Software configurations/environment variables/commands |
| -------------------------------------------------------------- |
| The below commands apply to the board |
| |
| 1. U-boot environment variable hwconfig |
| The default hwconfig is: |
| hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: |
| dr_mode=host,phy_type=utmi |
| Note: For USB gadget set "dr_mode=peripheral" |
| |
| 2. FMAN Ucode versions |
| fsl_fman_ucode_t1040.bin |
| |
| 3. Switching to alternate bank |
| Commands for switching to alternate bank. |
| |
| 1. To change from vbank0 to vbank4 |
| => cpld reset altbank (it will boot using vbank4) |
| |
| 2.To change from vbank4 to vbank0 |
| => cpld reset (it will boot using vbank0) |
| |
| NAND boot with 2 Stage boot loader |
| ---------------------------------- |
| PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. |
| SPL further initialise DDR using SPD and environment variables and copy |
| u-boot(768 KB) from flash to DDR. |
| Finally SPL transer control to u-boot for futher booting. |
| |
| SPL has following features: |
| - Executes within 256K |
| - No relocation required |
| |
| Run time view of SPL framework during boot :- |
| ----------------------------------------------- |
| Area | Address | |
| ----------------------------------------------- |
| Secure boot | 0xFFFC0000 (32KB) | |
| headers | | |
| ----------------------------------------------- |
| GD, BD | 0xFFFC8000 (4KB) | |
| ----------------------------------------------- |
| ENV | 0xFFFC9000 (8KB) | |
| ----------------------------------------------- |
| HEAP | 0xFFFCB000 (30KB) | |
| ----------------------------------------------- |
| STACK | 0xFFFD8000 (22KB) | |
| ----------------------------------------------- |
| U-boot SPL | 0xFFFD8000 (160KB) | |
| ----------------------------------------------- |
| |
| NAND Flash memory Map on T104xRDB |
| ------------------------------------------ |
| Start End Definition Size |
| 0x000000 0x0FFFFF u-boot 1MB |
| 0x180000 0x19FFFF u-boot env 128KB |
| 0x280000 0x29FFFF FMAN Ucode 128KB |
| 0x380000 0x39FFFF QE Firmware 128KB |
| |
| SD Card memory Map on T104xRDB |
| ------------------------------------------ |
| Block #blocks Definition Size |
| 0x008 2048 u-boot 1MB |
| 0x800 0024 u-boot env 8KB |
| 0x820 0256 FMAN Ucode 128KB |
| 0x920 0256 QE Firmware 128KB |
| |
| SPI Flash memory Map on T104xRDB |
| ------------------------------------------ |
| Start End Definition Size |
| 0x000000 0x0FFFFF u-boot 1MB |
| 0x100000 0x101FFF u-boot env 8KB |
| 0x110000 0x12FFFF FMAN Ucode 128KB |
| 0x130000 0x14FFFF QE Firmware 128KB |
| |
| Please note QE Firmware is only valid for T1040RDB |
| |
| |
| Switch Settings: (ON is 0, OFF is 1) |
| =============== |
| NAND boot SW setting: |
| SW1: 10001000 |
| SW2: 00111011 |
| SW3: 11110001 |
| |
| SPI boot SW setting: |
| SW1: 00100010 |
| SW2: 10111011 |
| SW3: 11100001 |
| |
| SD boot SW setting: |
| SW1: 00100000 |
| SW2: 00111011 |
| SW3: 11100001 |
