| MIPS Malta board | |
| How to flash using a MIPS Navigator Probe: | |
| - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will | |
| be unable to flash your Malta using a Navigator Probe. | |
| - Connect Navigator Console to your probe and Malta as usual. | |
| - Within Navigator Console run the following commands: | |
| source /path/to/u-boot/board/imgtec/malta/flash-malta-boot.tcl | |
| reset | |
| flash-boot /path/to/u-boot/u-boot.bin | |
| - You should now be able to reboot your Malta to a U-boot shell. |