blob: 1fc60864e20c888057a89e7d23dae78ba8c96490 [file] [log] [blame]
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
/*
* arch/arm/include/asm/arch-gxb/register.h
*
* Copyright (C) 2020 Amlogic, Inc. All rights reserved.
*
*/
#ifndef __REGISTER_H__
#define __REGISTER_H__
#define IO_CBUS_BASE 0xc1100000
#define IO_AXI_BUS_BASE 0xc1300000
#define IO_AHB_BUS_BASE 0xc9000000
#define IO_APB_BUS_BASE 0xc8000000
#define IO_APB_HDMI_BUS_BASE 0xd0040000
#define IO_VPU_BUS_BASE 0xd0100000
#define CBUS_REG_OFFSET(reg) ((reg) << 2)
#define CBUS_REG_ADDR(reg) (IO_CBUS_BASE + CBUS_REG_OFFSET(reg))
/* secure_apb.h redefined, move to asm/arch/regs.h */
#if 0
/* below UART0,UART1,AO_UART is m8 addr,it is placed is for compiling pass */
/* -------------------------------
// UART0
// ---------------------------- */
#define UART0_WFIFO 0x2130
#define UART0_RFIFO 0x2131
#define UART0_CONTROL 0x2132
#define UART0_STATUS 0x2133
#define UART0_MISC 0x2134
#define UART0_REG5 0x2135
/* ----------------------------
// UART1
----------------------------*/
#define UART1_WFIFO 0x2137
#define UART1_RFIFO 0x2138
#define UART1_CONTROL 0x2139
#define UART1_STATUS 0x213a
#define UART1_MISC 0x213b
#define UART1_REG5 0x213c
/* ------------------------------------------------------
The following are handled by $periphs/rtl/periphs_reg.v
---------------------------------------- */
#define PREG_CTLREG0_ADDR 0x2000
#define P_PREG_CTLREG0_ADDR CBUS_REG_ADDR(PREG_CTLREG0_ADDR)
/* ----------------------------
clock measure (4)
---------------------------- */
#define MSR_CLK_DUTY 0x21d6
#define MSR_CLK_REG0 0x21d7
#define MSR_CLK_REG1 0x21d8
#define MSR_CLK_REG2 0x21d9
#define P_MSR_CLK_DUTY CBUS_REG_ADDR(MSR_CLK_DUTY)
#define P_MSR_CLK_REG0 CBUS_REG_ADDR(MSR_CLK_REG0)
#define P_MSR_CLK_REG1 CBUS_REG_ADDR(MSR_CLK_REG1)
#define P_MSR_CLK_REG2 CBUS_REG_ADDR(MSR_CLK_REG2)
/* --------------------------------
* AO uart
* -------------------------------*/
#define IO_AOBUS_BASE 0xc8100000 ///1M
#define AOBUS_REG_OFFSET(reg) ((reg) )
#define AOBUS_REG_ADDR(reg) (IO_AOBUS_BASE + AOBUS_REG_OFFSET(reg))
#define AO_UART_WFIFO ((0x01 << 10) | (0x30 << 2)) ///../ucode/c_always_on_pointer.h:89
#define P_AO_UART_WFIFO AOBUS_REG_ADDR(AO_UART_WFIFO)
#define AO_UART_RFIFO ((0x01 << 10) | (0x31 << 2)) ///../ucode/c_always_on_pointer.h:90
#define P_AO_UART_RFIFO AOBUS_REG_ADDR(AO_UART_RFIFO)
#define AO_UART_CONTROL ((0x01 << 10) | (0x32 << 2)) ///../ucode/c_always_on_pointer.h:91
#define P_AO_UART_CONTROL AOBUS_REG_ADDR(AO_UART_CONTROL)
#define AO_UART_STATUS ((0x01 << 10) | (0x33 << 2)) ///../ucode/c_always_on_pointer.h:92
#define P_AO_UART_STATUS AOBUS_REG_ADDR(AO_UART_STATUS)
#define AO_UART_MISC ((0x01 << 10) | (0x34 << 2)) ///../ucode/c_always_on_pointer.h:93
#define P_AO_UART_MISC AOBUS_REG_ADDR(AO_UART_MISC)
#define AO_UART_REG5 ((0x01 << 10) | (0x35 << 2)) ///../ucode/c_always_on_pointer.h:94
#define P_AO_UART_REG5 AOBUS_REG_ADDR(AO_UART_REG5)
#endif
#endif //__REGISTER_H__