blob: 62763b9ebd5698b454280a6d4b62cd23a7312786 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
*
* Authors: Igor Grinberg <grinberg@compulab.co.il>
*/
#include <common.h>
#include <bmp_layout.h>
#include <errno.h>
#include <fs.h>
#include <fdt_support.h>
#include <image.h>
#include <nand.h>
#include <sata.h>
#include <spi.h>
#include <spi_flash.h>
#include <splash.h>
#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPI_FLASH
static struct spi_flash *sf;
static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
{
if (!sf) {
sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED,
CONFIG_SF_DEFAULT_MODE);
if (!sf)
return -ENODEV;
}
return spi_flash_read(sf, offset, read_size, (void *)bmp_load_addr);
}
#else
static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
{
debug("%s: sf support not available\n", __func__);
return -ENOSYS;
}
#endif
#ifdef CONFIG_CMD_NAND
static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
{
struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device);
return nand_read_skip_bad(mtd, offset,
&read_size, NULL,
mtd->size,
(u_char *)bmp_load_addr);
}
#else
static int splash_nand_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
{
debug("%s: nand support not available\n", __func__);
return -ENOSYS;
}
#endif
static int splash_storage_read_raw(struct splash_location *location,
u32 bmp_load_addr, size_t read_size)
{
u32 offset;
if (!location)
return -EINVAL;
offset = location->offset;
switch (location->storage) {
case SPLASH_STORAGE_NAND:
return splash_nand_read_raw(bmp_load_addr, offset, read_size);
case SPLASH_STORAGE_SF:
return splash_sf_read_raw(bmp_load_addr, offset, read_size);
default:
printf("Unknown splash location\n");
}
return -EINVAL;
}
static int splash_load_raw(struct splash_location *location, u32 bmp_load_addr)
{
struct bmp_header *bmp_hdr;
int res;
size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
goto splash_address_too_high;
res = splash_storage_read_raw(location, bmp_load_addr, bmp_header_size);
if (res < 0)
return res;
bmp_hdr = (struct bmp_header *)bmp_load_addr;
bmp_size = le32_to_cpu(bmp_hdr->file_size);
if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
goto splash_address_too_high;
return splash_storage_read_raw(location, bmp_load_addr, bmp_size);
splash_address_too_high:
printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n");
return -EFAULT;
}
static int splash_select_fs_dev(struct splash_location *location)
{
int res;
switch (location->storage) {
case SPLASH_STORAGE_MMC:
res = fs_set_blk_dev("mmc", location->devpart, FS_TYPE_ANY);
break;
case SPLASH_STORAGE_USB:
res = fs_set_blk_dev("usb", location->devpart, FS_TYPE_ANY);
break;
case SPLASH_STORAGE_SATA:
res = fs_set_blk_dev("sata", location->devpart, FS_TYPE_ANY);
break;
case SPLASH_STORAGE_NAND:
if (location->ubivol != NULL)
res = fs_set_blk_dev("ubi", NULL, FS_TYPE_UBIFS);
else
res = -ENODEV;
break;
default:
printf("Error: unsupported location storage.\n");
return -ENODEV;
}
if (res)
printf("Error: could not access storage.\n");
return res;
}
#ifdef CONFIG_USB_STORAGE
static int splash_init_usb(void)
{
int err;
err = usb_init();
if (err)
return err;
#ifndef CONFIG_DM_USB
err = usb_stor_scan(1) < 0 ? -ENODEV : 0;
#endif
return err;
}
#else
static inline int splash_init_usb(void)
{
printf("Cannot load splash image: no USB support\n");
return -ENOSYS;
}
#endif
#ifdef CONFIG_SATA
static int splash_init_sata(void)
{
return sata_probe(0);
}
#else
static inline int splash_init_sata(void)
{
printf("Cannot load splash image: no SATA support\n");
return -ENOSYS;
}
#endif
#ifdef CONFIG_CMD_UBIFS
static int splash_mount_ubifs(struct splash_location *location)
{
int res;
char cmd[32];
sprintf(cmd, "ubi part %s", location->mtdpart);
res = run_command(cmd, 0);
if (res)
return res;
sprintf(cmd, "ubifsmount %s", location->ubivol);
res = run_command(cmd, 0);
return res;
}
static inline int splash_umount_ubifs(void)
{
return run_command("ubifsumount", 0);
}
#else
static inline int splash_mount_ubifs(struct splash_location *location)
{
printf("Cannot load splash image: no UBIFS support\n");
return -ENOSYS;
}
static inline int splash_umount_ubifs(void)
{
printf("Cannot unmount UBIFS: no UBIFS support\n");
return -ENOSYS;
}
#endif
#define SPLASH_SOURCE_DEFAULT_FILE_NAME "splash.bmp"
static int splash_load_fs(struct splash_location *location, u32 bmp_load_addr)
{
int res = 0;
loff_t bmp_size;
loff_t actread;
char *splash_file;
splash_file = env_get("splashfile");
if (!splash_file)
splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME;
if (location->storage == SPLASH_STORAGE_USB)
res = splash_init_usb();
if (location->storage == SPLASH_STORAGE_SATA)
res = splash_init_sata();
if (location->ubivol != NULL)
res = splash_mount_ubifs(location);
if (res)
return res;
res = splash_select_fs_dev(location);
if (res)
goto out;
res = fs_size(splash_file, &bmp_size);
if (res) {
printf("Error (%d): cannot determine file size\n", res);
goto out;
}
if (bmp_load_addr + bmp_size >= gd->start_addr_sp) {
printf("Error: splashimage address too high. Data overwrites U-Boot and/or placed beyond DRAM boundaries.\n");
res = -EFAULT;
goto out;
}
splash_select_fs_dev(location);
res = fs_read(splash_file, bmp_load_addr, 0, 0, &actread);
out:
if (location->ubivol != NULL)
splash_umount_ubifs();
return res;
}
/**
* select_splash_location - return the splash location based on board support
* and env variable "splashsource".
*
* @locations: An array of supported splash locations.
* @size: Size of splash_locations array.
*
* @return: If a null set of splash locations is given, or
* splashsource env variable is set to unsupported value
* return NULL.
* If splashsource env variable is not defined
* return the first entry in splash_locations as default.
* If splashsource env variable contains a supported value
* return the location selected by splashsource.
*/
static struct splash_location *select_splash_location(
struct splash_location *locations, uint size)
{
int i;
char *env_splashsource;
if (!locations || size == 0)
return NULL;
env_splashsource = env_get("splashsource");
if (env_splashsource == NULL)
return &locations[0];
for (i = 0; i < size; i++) {
if (!strcmp(locations[i].name, env_splashsource))
return &locations[i];
}
printf("splashsource env variable set to unsupported value\n");
return NULL;
}
#ifdef CONFIG_FIT
static int splash_load_fit(struct splash_location *location, u32 bmp_load_addr)
{
int res;
int node_offset;
int splash_offset;
int splash_size;
struct image_header *img_header;
const u32 *fit_header;
u32 fit_size;
const size_t header_size = sizeof(struct image_header);
/* Read in image header */
res = splash_storage_read_raw(location, bmp_load_addr, header_size);
if (res < 0)
return res;
img_header = (struct image_header *)bmp_load_addr;
if (image_get_magic(img_header) != FDT_MAGIC) {
printf("Could not find FDT magic\n");
return -EINVAL;
}
fit_size = fdt_totalsize(img_header);
/* Read in entire FIT */
fit_header = (const u32 *)(bmp_load_addr + header_size);
res = splash_storage_read_raw(location, (u32)fit_header, fit_size);
if (res < 0)
return res;
res = fit_check_format(fit_header);
if (!res) {
debug("Could not find valid FIT image\n");
return -EINVAL;
}
node_offset = fit_image_get_node(fit_header, location->name);
if (node_offset < 0) {
debug("Could not find splash image '%s' in FIT\n",
location->name);
return -ENOENT;
}
res = fit_image_get_data_offset(fit_header, node_offset,
&splash_offset);
if (res < 0) {
printf("Failed to load splash image (err=%d)\n", res);
return res;
}
res = fit_image_get_data_size(fit_header, node_offset, &splash_size);
if (res < 0) {
printf("Failed to load splash image (err=%d)\n", res);
return res;
}
/* Align data offset to 4-byte boundrary */
fit_size = fdt_totalsize(fit_header);
fit_size = (fit_size + 3) & ~3;
/* Read in the splash data */
location->offset = (location->offset + fit_size + splash_offset);
res = splash_storage_read_raw(location, bmp_load_addr , splash_size);
if (res < 0)
return res;
return 0;
}
#endif /* CONFIG_FIT */
/**
* splash_source_load - load splash image from a supported location.
*
* Select a splash image location based on the value of splashsource environment
* variable and the board supported splash source locations, and load a
* splashimage to the address pointed to by splashimage environment variable.
*
* @locations: An array of supported splash locations.
* @size: Size of splash_locations array.
*
* @return: 0 on success, negative value on failure.
*/
int splash_source_load(struct splash_location *locations, uint size)
{
struct splash_location *splash_location;
char *env_splashimage_value;
u32 bmp_load_addr;
env_splashimage_value = env_get("splashimage");
if (env_splashimage_value == NULL)
return -ENOENT;
bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
if (bmp_load_addr == 0) {
printf("Error: bad splashimage address specified\n");
return -EFAULT;
}
splash_location = select_splash_location(locations, size);
if (!splash_location)
return -EINVAL;
if (splash_location->flags == SPLASH_STORAGE_RAW)
return splash_load_raw(splash_location, bmp_load_addr);
else if (splash_location->flags == SPLASH_STORAGE_FS)
return splash_load_fs(splash_location, bmp_load_addr);
#ifdef CONFIG_FIT
else if (splash_location->flags == SPLASH_STORAGE_FIT)
return splash_load_fit(splash_location, bmp_load_addr);
#endif
return -EINVAL;
}