include/configs/brppt1.h - manifest_repos/u-boot - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * brtpp1.h
  *
  * specific parts for B&R T-Series Motherboard
  *
  * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
  */

 #ifndef __CONFIG_BRPPT1_H__
 #define __CONFIG_BRPPT1_H__

 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
 /* ------------------------------------------------------------------------- */
 /* memory */
 #define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
 #define CONFIG_SYS_BOOTM_LEN		SZ_32M

 /* Clock Defines */
 #define V_OSCK				26000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)

 #define CONFIG_POWER_TPS65217

 /* Support both device trees and ATAGs. */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 /*#define CONFIG_MACH_TYPE		3589*/
 #define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/

 /* MMC/SD IP block */
 #if defined(CONFIG_EMMC_BOOT)
  #define CONFIG_SUPPORT_EMMC_BOOT
 #endif /* CONFIG_EMMC_BOOT */

 /*
  * When we have NAND flash we expect to be making use of mtdparts,
  * both for ease of use in U-Boot and for passing information on to
  * the Linux kernel.
  */

 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000

 /* RAW SD card / eMMC */
 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */

 /* NAND */
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS		0x140000
 #endif /* CONFIG_NAND */
 #endif /* CONFIG_SPL_OS_BOOT */

 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #endif /* CONFIG_NAND */

 /* Always 64 KiB env size */
 #define CONFIG_ENV_SIZE			(64 << 10)

 #ifdef CONFIG_NAND
 #define NANDTGTS \
 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 "cfgscr=nand read ${cfgaddr} cfgscr && source ${cfgaddr}\0" \
 "nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
 	"root=mtd6 rootfstype=jffs2 b_mode=${b_mode}\0" \
 "b_nand=nand read ${loadaddr} kernel; nand read ${dtbaddr} dtb; " \
 	"run nandargs; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \
 "b_tgts_std=usb0 nand net\0" \
 "b_tgts_rcy=net usb0 nand\0" \
 "b_tgts_pme=usb0 nand net\0"
 #else
 #define NANDTGTS ""
 #endif /* CONFIG_NAND */

 #define MMCSPI_TGTS \
 "t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
 	"b_mode=${b_mode} root=/dev/mmcblk0p2 rootfstype=ext4\0" \
 "b_t30lgcy#0=" \
 	"load ${loaddev}:2 ${loadaddr} /boot/PPTImage.md5 && " \
 	"load ${loaddev}:2 ${loadaddr} /boot/zImage && " \
 	"load ${loaddev}:2 ${dtbaddr} /boot/am335x-ppt30.dtb || " \
 	"load ${loaddev}:1 ${dtbaddr} am335x-ppt30-legacy.dtb; "\
 	"run t30args#0; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \
 "t30args#1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
 	"b_mode=${b_mode}\0" \
 "b_t30lgcy#1=" \
 	"load ${loaddev}:1 ${loadaddr} zImage && " \
 	"load ${loaddev}:1 ${dtbaddr} am335x-ppt30.dtb && " \
 	"load ${loaddev}:1 ${ramaddr} rootfsPPT30.uboot && " \
 	"run t30args#1; run cfgscr; bootz ${loadaddr} ${ramaddr} ${dtbaddr}\0" \
 "b_mmc0=load ${loaddev}:1 ${scraddr} bootscr.img && source ${scraddr}\0" \
 "b_mmc1=load ${loaddev}:1 ${scraddr} /boot/bootscr.img && source ${scraddr}\0" \
 "b_tgts_std=mmc0 mmc1 t30lgcy#0 t30lgcy#1 usb0 net\0" \
 "b_tgts_rcy=t30lgcy#1 usb0 net\0" \
 "b_tgts_pme=net usb0 mmc0 mmc1\0" \
 "loaddev=mmc 1\0"

 #ifdef CONFIG_ENV_IS_IN_MMC
 #define MMCTGTS \
 MMCSPI_TGTS \
 "cfgscr=mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr}\0"
 #else
 #define MMCTGTS ""
 #endif /* CONFIG_MMC */

 #ifdef CONFIG_SPI
 #define SPITGTS \
 MMCSPI_TGTS \
 "cfgscr=sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr}\0"
 #else
 #define SPITGTS ""
 #endif /* CONFIG_SPI */

 #define LOAD_OFFSET(x)			0x8##x

 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 BUR_COMMON_ENV \
 "verify=no\0" \
 "autoload=0\0" \
 "scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \
 "cfgaddr=" __stringify(LOAD_OFFSET(0020000)) "\0" \
 "dtbaddr=" __stringify(LOAD_OFFSET(0040000)) "\0" \
 "loadaddr=" __stringify(LOAD_OFFSET(0100000)) "\0" \
 "ramaddr=" __stringify(LOAD_OFFSET(2000000)) "\0" \
 "console=ttyO0,115200n8\0" \
 "optargs=consoleblank=0 quiet panic=2\0" \
 "b_break=0\0" \
 "b_usb0=usb start && load usb 0 ${scraddr} bootscr.img && source ${scraddr}\0" \
 "b_net=tftp ${scraddr} netscript.img && source ${scraddr}\0" \
 MMCTGTS \
 SPITGTS \
 NANDTGTS \
 "b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
 " elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
 " else setenv b_tgts ${b_tgts_std}; fi\0" \
 "b_default=run b_deftgts; for target in ${b_tgts};"\
 " do echo \"### booting ${target} ###\"; run b_${target};" \
 " if test ${b_break} = 1; then; exit; fi; done\0"
 #endif /* !CONFIG_SPL_BUILD*/

 #ifdef CONFIG_NAND
 /*
  * GPMC  block.  We support 1 device and the physical address to
  * access CS0 at is 0x8000000.
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x8000000
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
 					CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, \
 					10, 11, 12, 13, 14, 15, 16, 17, \
 					18, 19, 20, 21, 22, 23, 24, 25, \
 					26, 27, 28, 29, 30, 31, 32, 33, \
 					34, 35, 36, 37, 38, 39, 40, 41, \
 					42, 43, 44, 45, 46, 47, 48, 49, \
 					50, 51, 52, 53, 54, 55, 56, 57, }

 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14

 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE

 #define CONFIG_NAND_OMAP_GPMC_WSCFG	1
 #endif /* CONFIG_NAND */

 /* USB configuration */
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT

 #if defined(CONFIG_SPI)
 /* SPI Flash */
 #define CONFIG_SF_DEFAULT_SPEED			24000000
 #define CONFIG_SYS_SPI_U_BOOT_OFFS		0x40000
 /* Environment */
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_MAX_HZ			CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SECT_SIZE			CONFIG_ENV_SIZE
 #define CONFIG_ENV_OFFSET			0x20000
 #define CONFIG_ENV_OFFSET_REDUND		(CONFIG_ENV_OFFSET + \
 						 CONFIG_ENV_SECT_SIZE)
 #elif defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV		1
 #define CONFIG_SYS_MMC_ENV_PART		2
 #define CONFIG_ENV_OFFSET		0x40000	/* TODO: Adresse definieren */
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT

 #elif defined(CONFIG_ENV_IS_IN_NAND)
 /* No NAND env support in SPL */
 #define CONFIG_ENV_OFFSET		0x60000
 #define CONFIG_SYS_ENV_SECT_SIZE	CONFIG_ENV_SIZE
 #else
 #error "no storage for Environment defined!"
 #endif

 #endif	/* ! __CONFIG_BRPPT1_H__ */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* brtpp1.h
	*
	* specific parts for B&R T-Series Motherboard
	*
	* Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
	* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
	*/

	#ifndef __CONFIG_BRPPT1_H__
	#define __CONFIG_BRPPT1_H__

	#include <configs/bur_cfg_common.h>
	#include <configs/bur_am335x_common.h>
	/* ------------------------------------------------------------------------- */
	/* memory */
	#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
	#define CONFIG_SYS_BOOTM_LEN SZ_32M

	/* Clock Defines */
	#define V_OSCK 26000000 /* Clock output from T2 */
	#define V_SCLK (V_OSCK)

	#define CONFIG_POWER_TPS65217

	/* Support both device trees and ATAGs. */
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	/#define CONFIG_MACH_TYPE 3589/
	#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/

	/* MMC/SD IP block */
	#if defined(CONFIG_EMMC_BOOT)
	#define CONFIG_SUPPORT_EMMC_BOOT
	#endif /* CONFIG_EMMC_BOOT */

	/*
	* When we have NAND flash we expect to be making use of mtdparts,
	* both for ease of use in U-Boot and for passing information on to
	* the Linux kernel.
	*/

	#ifdef CONFIG_SPL_OS_BOOT
	#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000

	/* RAW SD card / eMMC */
	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */

	/* NAND */
	#ifdef CONFIG_NAND
	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000
	#endif /* CONFIG_NAND */
	#endif /* CONFIG_SPL_OS_BOOT */

	#ifdef CONFIG_NAND
	#define CONFIG_SPL_NAND_BASE
	#define CONFIG_SPL_NAND_DRIVERS
	#define CONFIG_SPL_NAND_ECC
	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	#endif /* CONFIG_NAND */

	/* Always 64 KiB env size */
	#define CONFIG_ENV_SIZE (64 << 10)

	#ifdef CONFIG_NAND
	#define NANDTGTS \
	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"cfgscr=nand read ${cfgaddr} cfgscr && source ${cfgaddr}\0" \
	"nandargs=setenv bootargs console=${console} ${optargs} ${optargs_rot} " \
	"root=mtd6 rootfstype=jffs2 b_mode=${b_mode}\0" \
	"b_nand=nand read ${loadaddr} kernel; nand read ${dtbaddr} dtb; " \
	"run nandargs; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \
	"b_tgts_std=usb0 nand net\0" \
	"b_tgts_rcy=net usb0 nand\0" \
	"b_tgts_pme=usb0 nand net\0"
	#else
	#define NANDTGTS ""
	#endif /* CONFIG_NAND */

	#define MMCSPI_TGTS \
	"t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
	"b_mode=${b_mode} root=/dev/mmcblk0p2 rootfstype=ext4\0" \
	"b_t30lgcy#0=" \
	"load ${loaddev}:2 ${loadaddr} /boot/PPTImage.md5 && " \
	"load ${loaddev}:2 ${loadaddr} /boot/zImage && " \
	"load ${loaddev}:2 ${dtbaddr} /boot/am335x-ppt30.dtb \|\| " \
	"load ${loaddev}:1 ${dtbaddr} am335x-ppt30-legacy.dtb; "\
	"run t30args#0; run cfgscr; bootz ${loadaddr} - ${dtbaddr}\0" \
	"t30args#1=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
	"b_mode=${b_mode}\0" \
	"b_t30lgcy#1=" \
	"load ${loaddev}:1 ${loadaddr} zImage && " \
	"load ${loaddev}:1 ${dtbaddr} am335x-ppt30.dtb && " \
	"load ${loaddev}:1 ${ramaddr} rootfsPPT30.uboot && " \
	"run t30args#1; run cfgscr; bootz ${loadaddr} ${ramaddr} ${dtbaddr}\0" \
	"b_mmc0=load ${loaddev}:1 ${scraddr} bootscr.img && source ${scraddr}\0" \
	"b_mmc1=load ${loaddev}:1 ${scraddr} /boot/bootscr.img && source ${scraddr}\0" \
	"b_tgts_std=mmc0 mmc1 t30lgcy#0 t30lgcy#1 usb0 net\0" \
	"b_tgts_rcy=t30lgcy#1 usb0 net\0" \
	"b_tgts_pme=net usb0 mmc0 mmc1\0" \
	"loaddev=mmc 1\0"

	#ifdef CONFIG_ENV_IS_IN_MMC
	#define MMCTGTS \
	MMCSPI_TGTS \
	"cfgscr=mmc dev 1; mmc read ${cfgaddr} 200 80; source ${cfgaddr}\0"
	#else
	#define MMCTGTS ""
	#endif /* CONFIG_MMC */

	#ifdef CONFIG_SPI
	#define SPITGTS \
	MMCSPI_TGTS \
	"cfgscr=sf probe; sf read ${cfgaddr} 0xC0000 10000; source ${cfgaddr}\0"
	#else
	#define SPITGTS ""
	#endif /* CONFIG_SPI */

	#define LOAD_OFFSET(x) 0x8##x

	#ifndef CONFIG_SPL_BUILD
	#define CONFIG_EXTRA_ENV_SETTINGS \
	BUR_COMMON_ENV \
	"verify=no\0" \
	"autoload=0\0" \
	"scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \
	"cfgaddr=" __stringify(LOAD_OFFSET(0020000)) "\0" \
	"dtbaddr=" __stringify(LOAD_OFFSET(0040000)) "\0" \
	"loadaddr=" __stringify(LOAD_OFFSET(0100000)) "\0" \
	"ramaddr=" __stringify(LOAD_OFFSET(2000000)) "\0" \
	"console=ttyO0,115200n8\0" \
	"optargs=consoleblank=0 quiet panic=2\0" \
	"b_break=0\0" \
	"b_usb0=usb start && load usb 0 ${scraddr} bootscr.img && source ${scraddr}\0" \
	"b_net=tftp ${scraddr} netscript.img && source ${scraddr}\0" \
	MMCTGTS \
	SPITGTS \
	NANDTGTS \
	"b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
	" elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
	" else setenv b_tgts ${b_tgts_std}; fi\0" \
	"b_default=run b_deftgts; for target in ${b_tgts};"\
	" do echo \"### booting ${target} ###\"; run b_${target};" \
	" if test ${b_break} = 1; then; exit; fi; done\0"
	#endif /* !CONFIG_SPL_BUILD*/

	#ifdef CONFIG_NAND
	/*
	* GPMC block. We support 1 device and the physical address to
	* access CS0 at is 0x8000000.
	*/
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x8000000
	/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	CONFIG_SYS_NAND_PAGE_SIZE)
	#define CONFIG_SYS_NAND_OOBSIZE 64
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
	10, 11, 12, 13, 14, 15, 16, 17, \
	18, 19, 20, 21, 22, 23, 24, 25, \
	26, 27, 28, 29, 30, 31, 32, 33, \
	34, 35, 36, 37, 38, 39, 40, 41, \
	42, 43, 44, 45, 46, 47, 48, 49, \
	50, 51, 52, 53, 54, 55, 56, 57, }

	#define CONFIG_SYS_NAND_ECCSIZE 512
	#define CONFIG_SYS_NAND_ECCBYTES 14

	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE

	#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
	#endif /* CONFIG_NAND */

	/* USB configuration */
	#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT

	#if defined(CONFIG_SPI)
	/* SPI Flash */
	#define CONFIG_SF_DEFAULT_SPEED 24000000
	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
	/* Environment */
	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
	#define CONFIG_ENV_OFFSET 0x20000
	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	CONFIG_ENV_SECT_SIZE)
	#elif defined(CONFIG_ENV_IS_IN_MMC)
	#define CONFIG_SYS_MMC_ENV_DEV 1
	#define CONFIG_SYS_MMC_ENV_PART 2
	#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */
	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT

	#elif defined(CONFIG_ENV_IS_IN_NAND)
	/* No NAND env support in SPL */
	#define CONFIG_ENV_OFFSET 0x60000
	#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
	#else
	#error "no storage for Environment defined!"
	#endif

	#endif /* ! __CONFIG_BRPPT1_H__ */