blob: 7a510505e0c252778dbf787dfdbb9b9340718cbc [file] [log] [blame]
/*
* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include "apq8096-db820c-pins.dtsi"
#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
serial0 = &blsp2_uart1;
serial1 = &blsp2_uart2;
i2c0 = &blsp1_i2c2;
i2c1 = &blsp2_i2c1;
i2c2 = &blsp2_i2c0;
spi0 = &blsp1_spi0;
spi1 = &blsp2_spi5;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
serial@75b0000 {
label = "LS-UART1";
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart1_2pins_default>;
pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
};
serial@75b1000 {
label = "LS-UART0";
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_4pins_default>;
pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
};
i2c@07577000 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
i2c@075b6000 {
/* On Low speed expansion */
label = "LS-I2C1";
status = "okay";
};
spi@07575000 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
i2c@075b5000 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
};
spi@075ba000{
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
sdhci@74a4900 {
/* External SD card */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
cd-gpios = <&msmgpio 38 0x1>;
status = "okay";
};
phy@34000 {
status = "okay";
};
phy@7410000 {
status = "okay";
};
phy@7411000 {
status = "okay";
};
phy@7412000 {
status = "okay";
};
usb@6a00000 {
status = "okay";
dwc3@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
};
usb3_id: usb3-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_det_gpio>;
};
usb@7600000 {
status = "okay";
dwc3@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
};
};
usb2_id: usb2-id {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_det_gpio>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
button@0 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
};
};
rpm-glink {
rpm_requests {
pm8994-regulators {
vdd_l1-supply = <&pm8994_s3>;
vdd_l2_l26_l28-supply = <&pm8994_s3>;
vdd_l3_l11-supply = <&pm8994_s3>;
vdd_l4_l27_l31-supply = <&pm8994_s3>;
vdd_l5_l7-supply = <&pm8994_s5>;
vdd_l14_l15-supply = <&pm8994_s5>;
vdd_l20_l21-supply = <&pm8994_s5>;
vdd_l25-supply = <&pm8994_s3>;
s3 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
s5 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
s7 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
l1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
l2 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
};
l3 {
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
};
l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l11 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
l17 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
};
l19 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l22 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
l25 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
l27 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
l28 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-allow-set-load;
};
l29 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
l30 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l32 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
};
};