blob: eea7f8f070cf8b2f82e9f95468d7186060e360a5 [file] [log] [blame]
/*
* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3399-puma.dtsi"
/ {
model = "Theobroma Systems RK3399-Q7 SoM";
compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
chosen {
stdout-path = "serial0:115200n8";
};
leds {
pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
sd-card-led {
label = "sd_card_led";
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc3v3_baseboard: vcc3v3-baseboard {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_baseboard";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_otg: vcc5v0-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
};
&i2c2 {
status = "okay";
clock-frequency = <400000>;
};
&i2c3 {
i2c-scl-rising-time-ns = <450>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
};
&i2c4 {
status = "okay";
clock-frequency = <400000>;
};
&i2c6 {
status = "okay";
clock-frequency = <400000>;
};
&i2s0 {
status = "okay";
rockchip,playback-channels = <8>;
rockchip,capture-channels = <8>;
#sound-dai-cells = <0>;
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pcie0 {
ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
status = "okay";
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&haikou_pin_hog>;
hog {
haikou_pin_hog: haikou-pin-hog {
rockchip,pins =
/* LID_BTN */
<RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
/* BATLOW# */
<RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
/* SLP_BTN# */
<RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
/* BIOS_DISABLE# */
<RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
led_sd_haikou: led-sd-gpio {
rockchip,pins =
<RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb2 {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins =
<RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm0 {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc3v3_baseboard>;
status = "okay";
};
&spi5 {
status = "okay";
};
&u2phy0 {
status = "okay";
};
&usbdrd3_0 {
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "otg";
status = "okay";
};
&u2phy0_host {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};