blob: 21ab517417fc63be52eb174d4810a5b1d421a247 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/* dvb-usb.h is part of the DVB USB library.
*
* Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* the headerfile, all dvb-usb-drivers have to include.
*
* TODO: clean-up the structures for unused fields and update the comments
*/
#ifndef __DVB_USB_H__
#define __DVB_USB_H__
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
#include <media/rc-core.h>
#include "dvb_frontend.h"
#include "dvb_demux.h"
#include "dvb_net.h"
#include "dmxdev.h"
#include "dvb-pll.h"
#include "dvb-usb-ids.h"
/* debug */
#ifdef CONFIG_DVB_USB_DEBUG
#define dprintk(var,level,args...) \
do { if ((var & level)) { printk(args); } } while (0)
#define debug_dump(b,l,func) {\
int loop_; \
for (loop_ = 0; loop_ < l; loop_++) func("%02x ", b[loop_]); \
func("\n");\
}
#define DVB_USB_DEBUG_STATUS
#else
#define dprintk(args...)
#define debug_dump(b,l,func)
#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)"
#endif
/* generic log methods - taken from usb.h */
#ifndef DVB_USB_LOG_PREFIX
#define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)"
#endif
#undef err
#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
#undef info
#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
#undef warn
#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
/**
* struct dvb_usb_device_description - name and its according USB IDs
* @name: real name of the box, regardless which DVB USB device class is in use
* @cold_ids: array of struct usb_device_id which describe the device in
* pre-firmware state
* @warm_ids: array of struct usb_device_id which describe the device in
* post-firmware state
*
* Each DVB USB device class can have one or more actual devices, this struct
* assigns a name to it.
*/
struct dvb_usb_device_description {
const char *name;
#define DVB_USB_ID_MAX_NUM 15
struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM];
struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM];
};
static inline u8 rc5_custom(struct rc_map_table *key)
{
return (key->scancode >> 8) & 0xff;
}
static inline u8 rc5_data(struct rc_map_table *key)
{
return key->scancode & 0xff;
}
static inline u16 rc5_scan(struct rc_map_table *key)
{
return key->scancode & 0xffff;
}
struct dvb_usb_device;
struct dvb_usb_adapter;
struct usb_data_stream;
/**
* Properties of USB streaming - TODO this structure should be somewhere else
* describes the kind of USB transfer used for data-streaming.
* (BULK or ISOC)
*/
struct usb_data_stream_properties {
#define USB_BULK 1
#define USB_ISOC 2
int type;
int count;
int endpoint;
union {
struct {
int buffersize; /* per URB */
} bulk;
struct {
int framesperurb;
int framesize;
int interval;
} isoc;
} u;
};
/**
* struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter.
* A DVB-USB-Adapter is basically a dvb_adapter which is present on a USB-device.
* @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
* @num_frontends: number of frontends of the DVB USB adapter.
* @frontend_ctrl: called to power on/off active frontend.
* @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the
* device (not URB submitting/killing).
* @pid_filter_ctrl: called to en/disable the PID filter, if any.
* @pid_filter: called to set/unset a PID for filtering.
* @frontend_attach: called to attach the possible frontends (fill fe-field
* of struct dvb_usb_device).
* @tuner_attach: called to attach the correct tuner and to fill pll_addr,
* pll_desc and pll_init_buf of struct dvb_usb_device).
* @stream: configuration of the USB streaming
*/
struct dvb_usb_adapter_fe_properties {
#define DVB_USB_ADAP_HAS_PID_FILTER 0x01
#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04
#define DVB_USB_ADAP_RECEIVES_204_BYTE_TS 0x08
#define DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD 0x10
int caps;
int pid_filter_count;
int (*streaming_ctrl) (struct dvb_usb_adapter *, int);
int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int);
int (*frontend_attach) (struct dvb_usb_adapter *);
int (*tuner_attach) (struct dvb_usb_adapter *);
struct usb_data_stream_properties stream;
int size_of_priv;
};
#define MAX_NO_OF_FE_PER_ADAP 3
struct dvb_usb_adapter_properties {
int size_of_priv;
int (*frontend_ctrl) (struct dvb_frontend *, int);
int num_frontends;
struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP];
};
/**
* struct dvb_rc_legacy - old properties of remote controller
* @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable
* remote control handling).
* @rc_map_size: number of items in @rc_map_table.
* @rc_query: called to query an event event.
* @rc_interval: time in ms between two queries.
*/
struct dvb_rc_legacy {
/* remote control properties */
#define REMOTE_NO_KEY_PRESSED 0x00
#define REMOTE_KEY_PRESSED 0x01
#define REMOTE_KEY_REPEAT 0x02
struct rc_map_table *rc_map_table;
int rc_map_size;
int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
int rc_interval;
};
/**
* struct dvb_rc properties of remote controller, using rc-core
* @rc_codes: name of rc codes table
* @protocol: type of protocol(s) currently used by the driver
* @allowed_protos: protocol(s) supported by the driver
* @driver_type: Used to point if a device supports raw mode
* @change_protocol: callback to change protocol
* @rc_query: called to query an event event.
* @rc_interval: time in ms between two queries.
* @bulk_mode: device supports bulk mode for RC (disable polling mode)
*/
struct dvb_rc {
char *rc_codes;
u64 protocol;
u64 allowed_protos;
enum rc_driver_type driver_type;
int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
char *module_name;
int (*rc_query) (struct dvb_usb_device *d);
int rc_interval;
bool bulk_mode; /* uses bulk mode */
};
/**
* enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one
* based on rc-core
* This is initialized/used only inside dvb-usb-remote.c.
* It shouldn't be set by the drivers.
*/
enum dvb_usb_mode {
DVB_RC_LEGACY,
DVB_RC_CORE,
};
/**
* struct dvb_usb_device_properties - properties of a dvb-usb-device
* @usb_ctrl: which USB device-side controller is in use. Needed for firmware
* download.
* @firmware: name of the firmware file.
* @download_firmware: called to download the firmware when the usb_ctrl is
* DEVICE_SPECIFIC.
* @no_reconnect: device doesn't do a reconnect after downloading the firmware,
* so do the warm initialization right after it
*
* @size_of_priv: how many bytes shall be allocated for the private field
* of struct dvb_usb_device.
*
* @power_ctrl: called to enable/disable power of the device.
* @read_mac_address: called to read the MAC address of the device.
* @identify_state: called to determine the state (cold or warm), when it
* is not distinguishable by the USB IDs.
*
* @rc: remote controller properties
*
* @i2c_algo: i2c_algorithm if the device has I2CoverUSB.
*
* @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic
* endpoint which received control messages with bulk transfers. When this
* is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write-
* helper functions.
*
* @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate
* endpoint for responses to control messages sent with bulk transfers via
* the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used
* instead of the generic_bulk_ctrl_endpoint when reading usb responses in
* the dvb_usb_generic_rw helper function.
*
* @num_device_descs: number of struct dvb_usb_device_description in @devices
* @devices: array of struct dvb_usb_device_description compatibles with these
* properties.
*/
#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
struct dvb_usb_device_properties {
#define DVB_USB_IS_AN_I2C_ADAPTER 0x01
int caps;
#define DEVICE_SPECIFIC 0
#define CYPRESS_AN2135 1
#define CYPRESS_AN2235 2
#define CYPRESS_FX2 3
int usb_ctrl;
int (*download_firmware) (struct usb_device *, const struct firmware *);
const char *firmware;
int no_reconnect;
int size_of_priv;
int num_adapters;
struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
int (*power_ctrl) (struct dvb_usb_device *, int);
int (*read_mac_address) (struct dvb_usb_device *, u8 []);
int (*identify_state) (struct usb_device *, struct dvb_usb_device_properties *,
struct dvb_usb_device_description **, int *);
struct {
enum dvb_usb_mode mode; /* Drivers shouldn't touch on it */
struct dvb_rc_legacy legacy;
struct dvb_rc core;
} rc;
struct i2c_algorithm *i2c_algo;
int generic_bulk_ctrl_endpoint;
int generic_bulk_ctrl_endpoint_response;
int num_device_descs;
struct dvb_usb_device_description devices[12];
};
/**
* struct usb_data_stream - generic object of an USB stream
* @buf_num: number of buffer allocated.
* @buf_size: size of each buffer in buf_list.
* @buf_list: array containing all allocate buffers for streaming.
* @dma_addr: list of dma_addr_t for each buffer in buf_list.
*
* @urbs_initialized: number of URBs initialized.
* @urbs_submitted: number of URBs submitted.
*/
#define MAX_NO_URBS_FOR_DATA_STREAM 10
struct usb_data_stream {
struct usb_device *udev;
struct usb_data_stream_properties props;
#define USB_STATE_INIT 0x00
#define USB_STATE_URB_BUF 0x01
int state;
void (*complete) (struct usb_data_stream *, u8 *, size_t);
struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
int buf_num;
unsigned long buf_size;
u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
int urbs_initialized;
int urbs_submitted;
void *user_priv;
};
/**
* struct dvb_usb_adapter - a DVB adapter on a USB device
* @id: index of this adapter (starting with 0).
*
* @feedcount: number of reqested feeds (used for streaming-activation)
* @pid_filtering: is hardware pid_filtering used or not.
*
* @pll_addr: I2C address of the tuner for programming
* @pll_init: array containing the initialization buffer
* @pll_desc: pointer to the appropriate struct dvb_pll_desc
* @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board
*
* @dvb_adap: device's dvb_adapter.
* @dmxdev: device's dmxdev.
* @demux: device's software demuxer.
* @dvb_net: device's dvb_net interfaces.
* @dvb_frontend: device's frontend.
* @max_feed_count: how many feeds can be handled simultaneously by this
* device
*
* @fe_init: rerouted frontend-init (wakeup) function.
* @fe_sleep: rerouted frontend-sleep function.
*
* @stream: the usb data stream.
*/
struct dvb_usb_fe_adapter {
struct dvb_frontend *fe;
int (*fe_init) (struct dvb_frontend *);
int (*fe_sleep) (struct dvb_frontend *);
struct usb_data_stream stream;
int pid_filtering;
int max_feed_count;
void *priv;
};
struct dvb_usb_adapter {
struct dvb_usb_device *dev;
struct dvb_usb_adapter_properties props;
#define DVB_USB_ADAP_STATE_INIT 0x000
#define DVB_USB_ADAP_STATE_DVB 0x001
int state;
u8 id;
int feedcount;
/* dvb */
struct dvb_adapter dvb_adap;
struct dmxdev dmxdev;
struct dvb_demux demux;
struct dvb_net dvb_net;
struct dvb_usb_fe_adapter fe_adap[MAX_NO_OF_FE_PER_ADAP];
int active_fe;
int num_frontends_initialized;
void *priv;
};
/**
* struct dvb_usb_device - object of a DVB USB device
* @props: copy of the struct dvb_usb_properties this device belongs to.
* @desc: pointer to the device's struct dvb_usb_device_description.
* @state: initialization and runtime state of the device.
*
* @powered: indicated whether the device is power or not.
* Powered is in/decremented for each call to modify the state.
* @udev: pointer to the device's struct usb_device.
*
* @data_mutex: mutex to protect the data structure used to store URB data
* @usb_mutex: mutex of USB control messages (reading needs two messages).
* Please notice that this mutex is used internally at the generic
* URB control functions. So, drivers using dvb_usb_generic_rw() and
* derivated functions should not lock it internally.
* @i2c_mutex: mutex for i2c-transfers
*
* @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
*
* @rc_dev: rc device for the remote control (rc-core mode)
* @input_dev: input device for the remote control (legacy mode)
* @rc_query_work: struct work_struct frequent rc queries
* @last_event: last triggered event
* @last_state: last state (no, pressed, repeat)
* @owner: owner of the dvb_adapter
* @priv: private data of the actual driver (allocate by dvb-usb, size defined
* in size_of_priv of dvb_usb_properties).
*/
struct dvb_usb_device {
struct dvb_usb_device_properties props;
struct dvb_usb_device_description *desc;
struct usb_device *udev;
#define DVB_USB_STATE_INIT 0x000
#define DVB_USB_STATE_I2C 0x001
#define DVB_USB_STATE_DVB 0x002
#define DVB_USB_STATE_REMOTE 0x004
int state;
int powered;
/* locking */
struct mutex data_mutex;
struct mutex usb_mutex;
/* i2c */
struct mutex i2c_mutex;
struct i2c_adapter i2c_adap;
int num_adapters_initialized;
struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
/* remote control */
struct rc_dev *rc_dev;
struct input_dev *input_dev;
char rc_phys[64];
struct delayed_work rc_query_work;
u32 last_event;
int last_state;
struct module *owner;
void *priv;
};
extern int dvb_usb_device_init(struct usb_interface *,
struct dvb_usb_device_properties *,
struct module *, struct dvb_usb_device **,
short *adapter_nums);
extern void dvb_usb_device_exit(struct usb_interface *);
/* the generic read/write method for device control */
extern int __must_check
dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16, int);
extern int __must_check
dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16);
/* commonly used remote control parsing */
extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[5], u32 *, int *);
/* commonly used firmware download types and function */
struct hexline {
u8 len;
u32 addr;
u8 type;
u8 data[255];
u8 chk;
};
extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
extern int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos);
#endif