| config ATH_COMMON |
| tristate |
| |
| config WLAN_VENDOR_ATH |
| bool "Atheros/Qualcomm devices" |
| default y |
| ---help--- |
| If you have a wireless card belonging to this class, say Y. |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about cards. If you say Y, you will be asked for |
| your specific card in the following questions. |
| |
| For more information and documentation on this module you can visit: |
| |
| http://wireless.kernel.org/en/users/Drivers/ath |
| |
| For information on all Atheros wireless drivers visit: |
| |
| http://wireless.kernel.org/en/users/Drivers/Atheros |
| |
| if WLAN_VENDOR_ATH |
| |
| config ATH_DEBUG |
| bool "Atheros wireless debugging" |
| ---help--- |
| Say Y, if you want to debug atheros wireless drivers. |
| Right now only ath9k makes use of this. |
| |
| config ATH_TRACEPOINTS |
| bool "Atheros wireless tracing" |
| depends on ATH_DEBUG |
| depends on EVENT_TRACING |
| ---help--- |
| This option enables tracepoints for atheros wireless drivers. |
| Currently, ath9k makes use of this facility. |
| |
| config ATH_REG_DYNAMIC_USER_REG_HINTS |
| bool "Atheros dynamic user regulatory hints" |
| depends on CFG80211_CERTIFICATION_ONUS |
| default n |
| ---help--- |
| Say N. This should only be enabled in countries where |
| this feature is explicitly allowed and only on cards that |
| specifically have been tested for this. |
| |
| config ATH_REG_DYNAMIC_USER_CERT_TESTING |
| bool "Atheros dynamic user regulatory testing" |
| depends on ATH_REG_DYNAMIC_USER_REG_HINTS && CFG80211_CERTIFICATION_ONUS |
| default n |
| ---help--- |
| Say N. This should only be enabled on systems |
| undergoing certification testing. |
| |
| # Moved from ATH10K Kconfig (./ath10k/Kconfig) |
| config ATH10K |
| tristate "Atheros 802.11ac wireless cards support" |
| depends on MAC80211 && HAS_DMA |
| select ATH_COMMON |
| select CRC32 |
| select WANT_DEV_COREDUMP |
| select ATH10K_CE |
| ---help--- |
| This module adds support for wireless adapters based on |
| Atheros IEEE 802.11ac family of chipsets. |
| |
| If you choose to build a module, it'll be called ath10k. |
| |
| config ATH10K_CE |
| bool |
| |
| config ATH10K_PCI |
| tristate "Atheros ath10k PCI support" |
| depends on ATH10K && PCI |
| ---help--- |
| This module adds support for PCIE bus |
| |
| config ATH10K_AHB |
| bool "Atheros ath10k AHB support" |
| depends on ATH10K_PCI && OF && RESET_CONTROLLER |
| ---help--- |
| This module adds support for AHB bus |
| |
| config ATH10K_SDIO |
| tristate "Atheros ath10k SDIO support (EXPERIMENTAL)" |
| depends on ATH10K && MMC |
| ---help--- |
| This module adds experimental support for SDIO/MMC bus. Currently |
| work in progress and will not fully work. |
| |
| config ATH10K_USB |
| tristate "Atheros ath10k USB support (EXPERIMENTAL)" |
| depends on ATH10K && USB |
| ---help--- |
| This module adds experimental support for USB bus. Currently |
| work in progress and will not fully work. |
| |
| config ATH10K_DEBUG |
| bool "Atheros ath10k debugging" |
| depends on ATH10K |
| ---help--- |
| Enables debug support |
| |
| If unsure, say Y to make it easier to debug problems. |
| |
| config ATH10K_DEBUGFS |
| bool "Atheros ath10k debugfs support" |
| depends on ATH10K && DEBUG_FS |
| ---help--- |
| Enabled debugfs support |
| |
| If unsure, say Y to make it easier to debug problems. |
| |
| config ATH10K_SPECTRAL |
| bool "Atheros ath10k spectral scan support" |
| depends on ATH10K_DEBUGFS |
| select RELAY |
| default n |
| ---help--- |
| Say Y to enable access to the FFT/spectral data via debugfs. |
| |
| config ATH10K_TRACING |
| bool "Atheros ath10k tracing support" |
| depends on ATH10K |
| depends on EVENT_TRACING |
| ---help--- |
| Select this to ath10k use tracing infrastructure. |
| |
| config ATH10K_DFS_CERTIFIED |
| bool "Atheros DFS support for certified platforms" |
| depends on ATH10K && CFG80211_CERTIFICATION_ONUS |
| default n |
| ---help--- |
| This option enables DFS support for initiating radiation on |
| ath10k. |
| |
| source "drivers/net/wireless/ath/ath5k/Kconfig" |
| source "drivers/net/wireless/ath/ath9k/Kconfig" |
| source "drivers/net/wireless/ath/carl9170/Kconfig" |
| source "drivers/net/wireless/ath/ath6kl/Kconfig" |
| source "drivers/net/wireless/ath/ar5523/Kconfig" |
| source "drivers/net/wireless/ath/wil6210/Kconfig" |
| source "drivers/net/wireless/ath/wcn36xx/Kconfig" |
| |
| endif |