blob: 3151b580dbd64093fec8c9007b8ff1b8dc30ffcf [file] [log] [blame]
/*
* Blackfin Infra-red Driver
*
* Copyright 2006-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*
*/
#include "bfin_sir.h"
#ifdef CONFIG_SIR_BFIN_DMA
#define DMA_SIR_RX_XCNT 10
#define DMA_SIR_RX_YCNT (PAGE_SIZE / DMA_SIR_RX_XCNT)
#define DMA_SIR_RX_FLUSH_JIFS (HZ * 4 / 250)
#endif
#if ANOMALY_05000447
static int max_rate = 57600;
#else
static int max_rate = 115200;
#endif
static void turnaround_delay(int mtt)
{
long ticks;
mtt = mtt < 10000 ? 10000 : mtt;
ticks = 1 + mtt / (USEC_PER_SEC / HZ);
schedule_timeout_uninterruptible(ticks);
}
static void bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
{
int i;
struct resource *res;
for (i = 0; i < pdev->num_resources; i++) {
res = &pdev->resource[i];
switch (res->flags) {
case IORESOURCE_MEM:
sp->membase = (void __iomem *)res->start;
break;
case IORESOURCE_IRQ:
sp->irq = res->start;
break;
case IORESOURCE_DMA:
sp->rx_dma_channel = res->start;
sp->tx_dma_channel = res->end;
break;
default:
break;
}
}
sp->clk = get_sclk();
#ifdef CONFIG_SIR_BFIN_DMA
sp->tx_done = 1;
init_timer(&(sp->rx_dma_timer));
#endif
}
static void bfin_sir_stop_tx(struct bfin_sir_port *port)
{
#ifdef CONFIG_SIR_BFIN_DMA
disable_dma(port->tx_dma_channel);
#endif
while (!(UART_GET_LSR(port) & THRE)) {
cpu_relax();
continue;
}
UART_CLEAR_IER(port, ETBEI);
}
static void bfin_sir_enable_tx(struct bfin_sir_port *port)
{
UART_SET_IER(port, ETBEI);
}
static void bfin_sir_stop_rx(struct bfin_sir_port *port)
{
UART_CLEAR_IER(port, ERBFI);
}
static void bfin_sir_enable_rx(struct bfin_sir_port *port)
{
UART_SET_IER(port, ERBFI);
}
static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
{
int ret = -EINVAL;
unsigned int quot;
unsigned short val, lsr, lcr;
static int utime;
int count = 10;
lcr = WLS(8);
switch (speed) {
case 9600:
case 19200:
case 38400:
case 57600:
case 115200:
/*
* IRDA is not affected by anomaly 05000230, so there is no
* need to tweak the divisor like he UART driver (which will
* slightly speed up the baud rate on us).
*/
quot = (port->clk + (8 * speed)) / (16 * speed);
do {
udelay(utime);
lsr = UART_GET_LSR(port);
} while (!(lsr & TEMT) && count--);
/* The useconds for 1 bits to transmit */
utime = 1000000 / speed + 1;
/* Clear UCEN bit to reset the UART state machine
* and control registers
*/
val = UART_GET_GCTL(port);
val &= ~UCEN;
UART_PUT_GCTL(port, val);
/* Set DLAB in LCR to Access THR RBR IER */
UART_SET_DLAB(port);
SSYNC();
UART_PUT_DLL(port, quot & 0xFF);
UART_PUT_DLH(port, (quot >> 8) & 0xFF);
SSYNC();
/* Clear DLAB in LCR */
UART_CLEAR_DLAB(port);
SSYNC();
UART_PUT_LCR(port, lcr);
val = UART_GET_GCTL(port);
val |= UCEN;
UART_PUT_GCTL(port, val);
ret = 0;
break;
default:
printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
break;
}
val = UART_GET_GCTL(port);
/* If not add the 'RPOLC', we can't catch the receive interrupt.
* It's related with the HW layout and the IR transiver.
*/
val |= UMOD_IRDA | RPOLC;
UART_PUT_GCTL(port, val);
return ret;
}
static int bfin_sir_is_receiving(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (!(UART_GET_IER(port) & ERBFI))
return 0;
return self->rx_buff.state != OUTSIDE_FRAME;
}
#ifdef CONFIG_SIR_BFIN_PIO
static void bfin_sir_tx_chars(struct net_device *dev)
{
unsigned int chr;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (self->tx_buff.len != 0) {
chr = *(self->tx_buff.data);
UART_PUT_CHAR(port, chr);
self->tx_buff.data++;
self->tx_buff.len--;
} else {
self->stats.tx_packets++;
self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
if (self->newspeed) {
bfin_sir_set_speed(port, self->newspeed);
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_stop_tx(port);
bfin_sir_enable_rx(port);
/* I'm hungry! */
netif_wake_queue(dev);
}
}
static void bfin_sir_rx_chars(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
unsigned char ch;
UART_CLEAR_LSR(port);
ch = UART_GET_CHAR(port);
async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
}
static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
while ((UART_GET_LSR(port) & DR))
bfin_sir_rx_chars(dev);
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
if (UART_GET_LSR(port) & THRE)
bfin_sir_tx_chars(dev);
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
#endif /* CONFIG_SIR_BFIN_PIO */
#ifdef CONFIG_SIR_BFIN_DMA
static void bfin_sir_dma_tx_chars(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (!port->tx_done)
return;
port->tx_done = 0;
if (self->tx_buff.len == 0) {
self->stats.tx_packets++;
if (self->newspeed) {
bfin_sir_set_speed(port, self->newspeed);
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_enable_rx(port);
port->tx_done = 1;
netif_wake_queue(dev);
return;
}
blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
(unsigned long)(self->tx_buff.data+self->tx_buff.len));
set_dma_config(port->tx_dma_channel,
set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
DMA_SYNC_RESTART));
set_dma_start_addr(port->tx_dma_channel,
(unsigned long)(self->tx_buff.data));
set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
set_dma_x_modify(port->tx_dma_channel, 1);
enable_dma(port->tx_dma_channel);
}
static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
clear_dma_irqstat(port->tx_dma_channel);
bfin_sir_stop_tx(port);
self->stats.tx_packets++;
self->stats.tx_bytes += self->tx_buff.len;
self->tx_buff.len = 0;
if (self->newspeed) {
bfin_sir_set_speed(port, self->newspeed);
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_enable_rx(port);
/* I'm hungry! */
netif_wake_queue(dev);
port->tx_done = 1;
}
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
static void bfin_sir_dma_rx_chars(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int i;
UART_CLEAR_LSR(port);
for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
}
void bfin_sir_rx_dma_timeout(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int x_pos, pos;
unsigned long flags;
spin_lock_irqsave(&self->lock, flags);
x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
if (x_pos == DMA_SIR_RX_XCNT)
x_pos = 0;
pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
if (pos > port->rx_dma_buf.tail) {
port->rx_dma_buf.tail = pos;
bfin_sir_dma_rx_chars(dev);
port->rx_dma_buf.head = port->rx_dma_buf.tail;
}
spin_unlock_irqrestore(&self->lock, flags);
}
static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
unsigned short irqstat;
spin_lock(&self->lock);
port->rx_dma_nrows++;
port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
bfin_sir_dma_rx_chars(dev);
if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
port->rx_dma_nrows = 0;
port->rx_dma_buf.tail = 0;
}
port->rx_dma_buf.head = port->rx_dma_buf.tail;
irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
clear_dma_irqstat(port->rx_dma_channel);
spin_unlock(&self->lock);
mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
return IRQ_HANDLED;
}
#endif /* CONFIG_SIR_BFIN_DMA */
static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
{
#ifdef CONFIG_SIR_BFIN_DMA
dma_addr_t dma_handle;
#endif /* CONFIG_SIR_BFIN_DMA */
if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
return -EBUSY;
}
if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
free_dma(port->rx_dma_channel);
return -EBUSY;
}
#ifdef CONFIG_SIR_BFIN_DMA
set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
port->rx_dma_buf.buf = dma_alloc_coherent(NULL, PAGE_SIZE,
&dma_handle, GFP_DMA);
port->rx_dma_buf.head = 0;
port->rx_dma_buf.tail = 0;
port->rx_dma_nrows = 0;
set_dma_config(port->rx_dma_channel,
set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
INTR_ON_ROW, DIMENSION_2D,
DATA_SIZE_8, DMA_SYNC_RESTART));
set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
set_dma_x_modify(port->rx_dma_channel, 1);
set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
set_dma_y_modify(port->rx_dma_channel, 1);
set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
enable_dma(port->rx_dma_channel);
port->rx_dma_timer.data = (unsigned long)(dev);
port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout;
#else
if (request_irq(port->irq, bfin_sir_rx_int, 0, "BFIN_SIR_RX", dev)) {
dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
return -EBUSY;
}
if (request_irq(port->irq+1, bfin_sir_tx_int, 0, "BFIN_SIR_TX", dev)) {
dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
free_irq(port->irq, dev);
return -EBUSY;
}
#endif
return 0;
}
static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
{
unsigned short val;
bfin_sir_stop_rx(port);
val = UART_GET_GCTL(port);
val &= ~(UCEN | UMOD_MASK | RPOLC);
UART_PUT_GCTL(port, val);
#ifdef CONFIG_SIR_BFIN_DMA
disable_dma(port->tx_dma_channel);
disable_dma(port->rx_dma_channel);
del_timer(&(port->rx_dma_timer));
dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
#else
free_irq(port->irq+1, dev);
free_irq(port->irq, dev);
#endif
free_dma(port->tx_dma_channel);
free_dma(port->rx_dma_channel);
}
#ifdef CONFIG_PM
static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
{
struct bfin_sir_port *sir_port;
struct net_device *dev;
struct bfin_sir_self *self;
sir_port = platform_get_drvdata(pdev);
if (!sir_port)
return 0;
dev = sir_port->dev;
self = netdev_priv(dev);
if (self->open) {
flush_work(&self->work);
bfin_sir_shutdown(self->sir_port, dev);
netif_device_detach(dev);
}
return 0;
}
static int bfin_sir_resume(struct platform_device *pdev)
{
struct bfin_sir_port *sir_port;
struct net_device *dev;
struct bfin_sir_self *self;
struct bfin_sir_port *port;
sir_port = platform_get_drvdata(pdev);
if (!sir_port)
return 0;
dev = sir_port->dev;
self = netdev_priv(dev);
port = self->sir_port;
if (self->open) {
if (self->newspeed) {
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_startup(port, dev);
bfin_sir_set_speed(port, 9600);
bfin_sir_enable_rx(port);
netif_device_attach(dev);
}
return 0;
}
#else
#define bfin_sir_suspend NULL
#define bfin_sir_resume NULL
#endif
static void bfin_sir_send_work(struct work_struct *work)
{
struct bfin_sir_self *self = container_of(work, struct bfin_sir_self, work);
struct net_device *dev = self->sir_port->dev;
struct bfin_sir_port *port = self->sir_port;
unsigned short val;
int tx_cnt = 10;
while (bfin_sir_is_receiving(dev) && --tx_cnt)
turnaround_delay(self->mtt);
bfin_sir_stop_rx(port);
/* To avoid losting RX interrupt, we reset IR function before
* sending data. We also can set the speed, which will
* reset all the UART.
*/
val = UART_GET_GCTL(port);
val &= ~(UMOD_MASK | RPOLC);
UART_PUT_GCTL(port, val);
SSYNC();
val |= UMOD_IRDA | RPOLC;
UART_PUT_GCTL(port, val);
SSYNC();
/* bfin_sir_set_speed(port, self->speed); */
#ifdef CONFIG_SIR_BFIN_DMA
bfin_sir_dma_tx_chars(dev);
#endif
bfin_sir_enable_tx(port);
netif_trans_update(dev);
}
static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
int speed = irda_get_next_speed(skb);
netif_stop_queue(dev);
self->mtt = irda_get_mtt(skb);
if (speed != self->speed && speed != -1)
self->newspeed = speed;
self->tx_buff.data = self->tx_buff.head;
if (skb->len == 0)
self->tx_buff.len = 0;
else
self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
schedule_work(&self->work);
dev_kfree_skb(skb);
return 0;
}
static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
{
struct if_irda_req *rq = (struct if_irda_req *)ifreq;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int ret = 0;
switch (cmd) {
case SIOCSBANDWIDTH:
if (capable(CAP_NET_ADMIN)) {
if (self->open) {
ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
bfin_sir_enable_rx(port);
} else {
dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
ret = 0;
}
}
break;
case SIOCSMEDIABUSY:
ret = -EPERM;
if (capable(CAP_NET_ADMIN)) {
irda_device_set_media_busy(dev, TRUE);
ret = 0;
}
break;
case SIOCGRECEIVING:
rq->ifr_receiving = bfin_sir_is_receiving(dev);
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
return &self->stats;
}
static int bfin_sir_open(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int err;
self->newspeed = 0;
self->speed = 9600;
spin_lock_init(&self->lock);
err = bfin_sir_startup(port, dev);
if (err)
goto err_startup;
bfin_sir_set_speed(port, 9600);
self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
if (!self->irlap) {
err = -ENOMEM;
goto err_irlap;
}
INIT_WORK(&self->work, bfin_sir_send_work);
/*
* Now enable the interrupt then start the queue
*/
self->open = 1;
bfin_sir_enable_rx(port);
netif_start_queue(dev);
return 0;
err_irlap:
self->open = 0;
bfin_sir_shutdown(port, dev);
err_startup:
return err;
}
static int bfin_sir_stop(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
flush_work(&self->work);
bfin_sir_shutdown(self->sir_port, dev);
if (self->rxskb) {
dev_kfree_skb(self->rxskb);
self->rxskb = NULL;
}
/* Stop IrLAP */
if (self->irlap) {
irlap_close(self->irlap);
self->irlap = NULL;
}
netif_stop_queue(dev);
self->open = 0;
return 0;
}
static int bfin_sir_init_iobuf(iobuff_t *io, int size)
{
io->head = kmalloc(size, GFP_KERNEL);
if (!io->head)
return -ENOMEM;
io->truesize = size;
io->in_frame = FALSE;
io->state = OUTSIDE_FRAME;
io->data = io->head;
return 0;
}
static const struct net_device_ops bfin_sir_ndo = {
.ndo_open = bfin_sir_open,
.ndo_stop = bfin_sir_stop,
.ndo_start_xmit = bfin_sir_hard_xmit,
.ndo_do_ioctl = bfin_sir_ioctl,
.ndo_get_stats = bfin_sir_stats,
};
static int bfin_sir_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct bfin_sir_self *self;
unsigned int baudrate_mask;
struct bfin_sir_port *sir_port;
int err;
if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
per[pdev->id][3] == pdev->id) {
err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
if (err)
return err;
} else {
dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
return -ENODEV;
}
err = -ENOMEM;
sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
if (!sir_port)
goto err_mem_0;
bfin_sir_init_ports(sir_port, pdev);
dev = alloc_irdadev(sizeof(*self));
if (!dev)
goto err_mem_1;
self = netdev_priv(dev);
self->dev = &pdev->dev;
self->sir_port = sir_port;
sir_port->dev = dev;
err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
if (err)
goto err_mem_2;
err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
if (err)
goto err_mem_3;
dev->netdev_ops = &bfin_sir_ndo;
dev->irq = sir_port->irq;
irda_init_max_qos_capabilies(&self->qos);
baudrate_mask = IR_9600;
switch (max_rate) {
case 115200:
baudrate_mask |= IR_115200;
case 57600:
baudrate_mask |= IR_57600;
case 38400:
baudrate_mask |= IR_38400;
case 19200:
baudrate_mask |= IR_19200;
case 9600:
break;
default:
dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
}
self->qos.baud_rate.bits &= baudrate_mask;
self->qos.min_turn_time.bits = 1; /* 10 ms or more */
irda_qos_bits_to_value(&self->qos);
err = register_netdev(dev);
if (err) {
kfree(self->tx_buff.head);
err_mem_3:
kfree(self->rx_buff.head);
err_mem_2:
free_netdev(dev);
err_mem_1:
kfree(sir_port);
err_mem_0:
peripheral_free_list(per[pdev->id]);
} else
platform_set_drvdata(pdev, sir_port);
return err;
}
static int bfin_sir_remove(struct platform_device *pdev)
{
struct bfin_sir_port *sir_port;
struct net_device *dev = NULL;
struct bfin_sir_self *self;
sir_port = platform_get_drvdata(pdev);
if (!sir_port)
return 0;
dev = sir_port->dev;
self = netdev_priv(dev);
unregister_netdev(dev);
kfree(self->tx_buff.head);
kfree(self->rx_buff.head);
free_netdev(dev);
kfree(sir_port);
return 0;
}
static struct platform_driver bfin_ir_driver = {
.probe = bfin_sir_probe,
.remove = bfin_sir_remove,
.suspend = bfin_sir_suspend,
.resume = bfin_sir_resume,
.driver = {
.name = DRIVER_NAME,
},
};
module_platform_driver(bfin_ir_driver);
module_param(max_rate, int, 0);
MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
MODULE_AUTHOR("Graf Yang <graf.yang@analog.com>");
MODULE_DESCRIPTION("Blackfin IrDA driver");
MODULE_LICENSE("GPL");