blob: 0e392ccbdd3f1be35d8377d7033de722d423ba1b [file] [log] [blame] [edit]
/*
* (C) Copyright 2006
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <x0khasim@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _OMAP3_SYS_H_
#define _OMAP3_SYS_H_
#include <asm/arch/sizes.h>
/*
* OMAP3 specific Section
*/
/* Stuff on L3 Interconnect */
#define SMX_APE_BASE 0x68000000
/* L3 Firewall */
#define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048)
#define A_READPERM0 (SMX_APE_BASE + 0x05050)
#define A_WRITEPERM0 (SMX_APE_BASE + 0x05058)
/* GPMC */
#define OMAP34XX_GPMC_BASE (0x6E000000)
/* SMS */
#define OMAP34XX_SMS_BASE 0x6C000000
/* SDRC */
#define OMAP34XX_SDRC_BASE 0x6D000000
/*
* L4 Peripherals - L4 Wakeup and L4 Core now
*/
#define OMAP34XX_CORE_L4_IO_BASE 0x48000000
#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000
#define OMAP34XX_L4_PER 0x49000000
#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE
/* CONTROL */
#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE+0x2000)
/* TAP information dont know for 3430*/
#define OMAP34XX_TAP_BASE (0x49000000) /*giving some junk for virtio */
/* UART */
#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE+0x6a000)
#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE+0x6c000)
#define OMAP34XX_UART3 (OMAP34XX_L4_PER+0x20000)
/* General Purpose Timers */
#define OMAP34XX_GPT1 0x48318000
#define OMAP34XX_GPT2 0x49032000
#define OMAP34XX_GPT3 0x49034000
#define OMAP34XX_GPT4 0x49036000
#define OMAP34XX_GPT5 0x49038000
#define OMAP34XX_GPT6 0x4903A000
#define OMAP34XX_GPT7 0x4903C000
#define OMAP34XX_GPT8 0x4903E000
#define OMAP34XX_GPT9 0x49040000
#define OMAP34XX_GPT10 0x48086000
#define OMAP34XX_GPT11 0x48088000
#define OMAP34XX_GPT12 0x48304000
/* WatchDog Timers (1 secure, 3 GP) */
#define WD1_BASE (0x4830C000)
#define WD2_BASE (0x48314000)
#define WD3_BASE (0x49030000)
/* 32KTIMER */
#define SYNC_32KTIMER_BASE (0x48320000)
#define S32K_CR (SYNC_32KTIMER_BASE+0x10)
/*
* SDP3430 specific Section
*/
/*
* The 343x's chip selects are programmable. The mask ROM
* does configure CS0 to 0x08000000 before dispatch. So, if
* you want your code to live below that address, you have to
* be prepared to jump though hoops, to reset the base address.
* Same as in SDP3430
*/
/* base address for indirect vectors (internal boot mode) */
#define SRAM_OFFSET0 0x40000000
#define SRAM_OFFSET1 0x00200000
#define SRAM_OFFSET2 0x0000F800
#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
/*
* TODO: Are they required for AM3517?
*/
#if defined(CONFIG_3430SDP) || defined(CONFIG_OMAP3EVM)
/* FPGA on Debug board.*/
#define ETH_CONTROL_REG (DEBUG_BASE+0x30b)
#define LAN_RESET_REGISTER (DEBUG_BASE+0x1c)
#define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60)
#define LED_REGISTER (DEBUG_BASE+0x40)
#define FPGA_REV_REGISTER (DEBUG_BASE+0x10)
#define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800)
#define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900)
#define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00)
#define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00)
#define ENHANCED_UI_EE_NAME "750-2075"
#endif
#endif /* _OMAP3430_SYS_H_ */