| /* | |
| * (C) Copyright 2006 | |
| * Texas Instruments <www.ti.com> | |
| * Richard Woodruff <r-woodruff2@ti.com> | |
| * | |
| * X-Loader Configuation settings for the TI OMAP SDP3430 board. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #ifndef __CONFIG_H | |
| #define __CONFIG_H | |
| /* serial printf facility takes about 3.5K */ | |
| #define CFG_PRINTF | |
| //#undef CFG_PRINTF | |
| /* | |
| * High Level Configuration Options | |
| */ | |
| #define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ | |
| #define CONFIG_OMAP 1 /* in a TI OMAP core */ | |
| #define CONFIG_OMAP34XX 1 /* which is a 34XX */ | |
| #define CONFIG_OMAP3430 1 /* which is in a 3430 */ | |
| #define CONFIG_3430SDP 1 /* working with SDP */ | |
| //#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */ | |
| /* Enable the below macro if MMC boot support is required */ | |
| //#define CONFIG_MMC 1 | |
| #if defined(CONFIG_MMC) | |
| #define CFG_CMD_MMC 1 | |
| #define CFG_CMD_FAT 1 | |
| #endif | |
| #include <asm/arch/cpu.h> /* get chip and board defs */ | |
| /* uncomment it if you need timer based udelay(). it takes about 250 bytes */ | |
| //#define CFG_UDELAY | |
| /* Clock Defines */ | |
| #define V_OSCK 19200000 /* Clock output from T2 */ | |
| #if (V_OSCK > 19200000) | |
| #define V_SCLK (V_OSCK >> 1) | |
| #else | |
| #define V_SCLK V_OSCK | |
| #endif | |
| //#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */ | |
| #define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */ | |
| #define PRCM_PCLK_OPP2 1 /* ARM=381MHz - VDD1=1.20v */ | |
| /* Memory type */ | |
| #define CFG_3430SDRAM_DDR 1 | |
| /* The actual register values are defined in u-boot- mem.h */ | |
| /* SDRAM Bank Allocation method */ | |
| //#define SDRC_B_R_C 1 | |
| //#define SDRC_B1_R_B0_C 1 | |
| #define SDRC_R_B_C 1 | |
| /* Boot type */ | |
| #define CFG_NAND 1 | |
| //#define CFG_ONENAND 1 | |
| # define NAND_BASE_ADR NAND_BASE /* NAND flash */ | |
| # define ONENAND_BASE ONENAND_MAP /* OneNand flash */ | |
| #ifdef CFG_NAND | |
| #define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M | |
| #define OMAP34XX_GPMC_CS0_MAP NAND_BASE_ADR | |
| #else | |
| #define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M | |
| #define OMAP34XX_GPMC_CS0_MAP ONENAND_BASE | |
| #define ONENAND_ADDR ONENAND_BASE /* physical address of OneNAND at CS0*/ | |
| #endif | |
| #ifdef CFG_PRINTF | |
| #define CFG_NS16550 | |
| #define CFG_NS16550_SERIAL | |
| #define CFG_NS16550_REG_SIZE (-4) | |
| #define CFG_NS16550_CLK (48000000) | |
| #define CFG_NS16550_COM1 OMAP34XX_UART1 | |
| /* | |
| * select serial console configuration | |
| */ | |
| #define CONFIG_SERIAL1 1 /* UART1 on 3430SDP */ | |
| #define CONFIG_CONS_INDEX 1 | |
| #define CONFIG_BAUDRATE 115200 | |
| #define CFG_PBSIZE 256 | |
| #endif /* CFG_PRINTF */ | |
| /* | |
| * Miscellaneous configurable options | |
| */ | |
| #define CFG_LOADADDR 0x80008000 | |
| #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ | |
| /*----------------------------------------------------------------------- | |
| * Stack sizes | |
| * | |
| * The stack sizes are set up in start.S using the settings below | |
| */ | |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ | |
| #ifdef CFG_NAND | |
| /*----------------------------------------------------------------------- | |
| * Board NAND Info. | |
| */ | |
| #define CFG_NAND_K9F1G08R0A /* Samsung 8-bit 128MB chip large page NAND chip*/ | |
| #define NAND_8BIT | |
| /* NAND is partitioned: | |
| * 0x00000000 - 0x0007FFFF Booting Image | |
| * 0x00080000 - 0x000BFFFF U-Boot Image | |
| * 0x000C0000 - 0x000FFFFF U-Boot Env Data (X-loader doesn't care) | |
| * 0x00100000 - 0x002FFFFF Kernel Image | |
| * 0x00300000 - 0x08000000 depends on application | |
| */ | |
| #define NAND_UBOOT_START 0x0080000 /* Leaving first 4 blocks for x-load */ | |
| #define NAND_UBOOT_END 0x00C0000 /* Giving a space of 2 blocks = 256KB */ | |
| #define NAND_BLOCK_SIZE 0x20000 | |
| #define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50) | |
| #define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE+0x7C) | |
| #define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE+0x80) | |
| #define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE+0x84) | |
| #ifdef NAND_16BIT | |
| #define WRITE_NAND_COMMAND(d, adr) \ | |
| do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d;} while(0) | |
| #define WRITE_NAND_ADDRESS(d, adr) \ | |
| do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d;} while(0) | |
| #define WRITE_NAND(d, adr) \ | |
| do {*(volatile u16 *)GPMC_NAND_DATA_0 = d;} while(0) | |
| #define READ_NAND(adr) \ | |
| (*(volatile u16 *)GPMC_NAND_DATA_0) | |
| #define NAND_WAIT_READY() | |
| #define NAND_WP_OFF() \ | |
| do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) | |
| #define NAND_WP_ON() \ | |
| do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) | |
| #else /* to support 8-bit NAND devices */ | |
| #define WRITE_NAND_COMMAND(d, adr) \ | |
| do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d;} while(0) | |
| #define WRITE_NAND_ADDRESS(d, adr) \ | |
| do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d;} while(0) | |
| #define WRITE_NAND(d, adr) \ | |
| do {*(volatile u8 *)GPMC_NAND_DATA_0 = d;} while(0) | |
| #define READ_NAND(adr) \ | |
| (*(volatile u8 *)GPMC_NAND_DATA_0); | |
| #define NAND_WAIT_READY() | |
| #define NAND_WP_OFF() \ | |
| do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) | |
| #define NAND_WP_ON() \ | |
| do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) | |
| #endif | |
| #define NAND_CTL_CLRALE(adr) | |
| #define NAND_CTL_SETALE(adr) | |
| #define NAND_CTL_CLRCLE(adr) | |
| #define NAND_CTL_SETCLE(adr) | |
| #define NAND_DISABLE_CE() | |
| #define NAND_ENABLE_CE() | |
| #else | |
| /*----------------------------------------------------------------------- | |
| * Board oneNAND Info. | |
| */ | |
| #define CFG_SYNC_BURST_READ 1 | |
| /* OneNAND is partitioned: | |
| * 0x0000000 - 0x0080000 X-Loader | |
| * 0x0080000 - 0x00c0000 U-boot Image | |
| * 0x00c0000 - 0x00e0000 U-Boot Env Data (X-loader doesn't care) | |
| * 0x00e0000 - 0x0120000 Kernel Image | |
| * 0x0120000 - 0x4000000 depends on application | |
| */ | |
| #define ONENAND_START_BLOCK 4 | |
| #define ONENAND_END_BLOCK 6 | |
| #define ONENAND_PAGE_SIZE 2048 /* 2KB */ | |
| #define ONENAND_BLOCK_SIZE 0x20000 /* 128KB */ | |
| #endif /* oneNAND */ | |
| #endif /* __CONFIG_H */ | |