| Changes since 2.5.0: | |
| --- | |
| [recommended] | |
| New helpers: sb_bread(), sb_getblk(), sb_find_get_block(), set_bh(), | |
| sb_set_blocksize() and sb_min_blocksize(). | |
| Use them. | |
| (sb_find_get_block() replaces 2.4's get_hash_table()) | |
| --- | |
| [recommended] | |
| New methods: ->alloc_inode() and ->destroy_inode(). | |
| Remove inode->u.foo_inode_i | |
| Declare | |
| struct foo_inode_info { | |
| /* fs-private stuff */ | |
| struct inode vfs_inode; | |
| }; | |
| static inline struct foo_inode_info *FOO_I(struct inode *inode) | |
| { | |
| return list_entry(inode, struct foo_inode_info, vfs_inode); | |
| } | |
| Use FOO_I(inode) instead of &inode->u.foo_inode_i; | |
| Add foo_alloc_inode() and foo_destroy_inode() - the former should allocate | |
| foo_inode_info and return the address of ->vfs_inode, the latter should free | |
| FOO_I(inode) (see in-tree filesystems for examples). | |
| Make them ->alloc_inode and ->destroy_inode in your super_operations. | |
| Keep in mind that now you need explicit initialization of private data | |
| typically between calling iget_locked() and unlocking the inode. | |
| At some point that will become mandatory. | |
| --- | |
| [mandatory] | |
| Change of file_system_type method (->read_super to ->get_sb) | |
| ->read_super() is no more. Ditto for DECLARE_FSTYPE and DECLARE_FSTYPE_DEV. | |
| Turn your foo_read_super() into a function that would return 0 in case of | |
| success and negative number in case of error (-EINVAL unless you have more | |
| informative error value to report). Call it foo_fill_super(). Now declare | |
| int foo_get_sb(struct file_system_type *fs_type, | |
| int flags, const char *dev_name, void *data, struct vfsmount *mnt) | |
| { | |
| return get_sb_bdev(fs_type, flags, dev_name, data, foo_fill_super, | |
| mnt); | |
| } | |
| (or similar with s/bdev/nodev/ or s/bdev/single/, depending on the kind of | |
| filesystem). | |
| Replace DECLARE_FSTYPE... with explicit initializer and have ->get_sb set as | |
| foo_get_sb. | |
| --- | |
| [mandatory] | |
| Locking change: ->s_vfs_rename_sem is taken only by cross-directory renames. | |
| Most likely there is no need to change anything, but if you relied on | |
| global exclusion between renames for some internal purpose - you need to | |
| change your internal locking. Otherwise exclusion warranties remain the | |
| same (i.e. parents and victim are locked, etc.). | |
| --- | |
| [informational] | |
| Now we have the exclusion between ->lookup() and directory removal (by | |
| ->rmdir() and ->rename()). If you used to need that exclusion and do | |
| it by internal locking (most of filesystems couldn't care less) - you | |
| can relax your locking. | |
| --- | |
| [mandatory] | |
| ->lookup(), ->truncate(), ->create(), ->unlink(), ->mknod(), ->mkdir(), | |
| ->rmdir(), ->link(), ->lseek(), ->symlink(), ->rename() | |
| and ->readdir() are called without BKL now. Grab it on entry, drop upon return | |
| - that will guarantee the same locking you used to have. If your method or its | |
| parts do not need BKL - better yet, now you can shift lock_kernel() and | |
| unlock_kernel() so that they would protect exactly what needs to be | |
| protected. | |
| --- | |
| [mandatory] | |
| BKL is also moved from around sb operations. BKL should have been shifted into | |
| individual fs sb_op functions. If you don't need it, remove it. | |
| --- | |
| [informational] | |
| check for ->link() target not being a directory is done by callers. Feel | |
| free to drop it... | |
| --- | |
| [informational] | |
| ->link() callers hold ->i_mutex on the object we are linking to. Some of your | |
| problems might be over... | |
| --- | |
| [mandatory] | |
| new file_system_type method - kill_sb(superblock). If you are converting | |
| an existing filesystem, set it according to ->fs_flags: | |
| FS_REQUIRES_DEV - kill_block_super | |
| FS_LITTER - kill_litter_super | |
| neither - kill_anon_super | |
| FS_LITTER is gone - just remove it from fs_flags. | |
| --- | |
| [mandatory] | |
| FS_SINGLE is gone (actually, that had happened back when ->get_sb() | |
| went in - and hadn't been documented ;-/). Just remove it from fs_flags | |
| (and see ->get_sb() entry for other actions). | |
| --- | |
| [mandatory] | |
| ->setattr() is called without BKL now. Caller _always_ holds ->i_mutex, so | |
| watch for ->i_mutex-grabbing code that might be used by your ->setattr(). | |
| Callers of notify_change() need ->i_mutex now. | |
| --- | |
| [recommended] | |
| New super_block field "struct export_operations *s_export_op" for | |
| explicit support for exporting, e.g. via NFS. The structure is fully | |
| documented at its declaration in include/linux/fs.h, and in | |
| Documentation/filesystems/nfs/Exporting. | |
| Briefly it allows for the definition of decode_fh and encode_fh operations | |
| to encode and decode filehandles, and allows the filesystem to use | |
| a standard helper function for decode_fh, and provide file-system specific | |
| support for this helper, particularly get_parent. | |
| It is planned that this will be required for exporting once the code | |
| settles down a bit. | |
| [mandatory] | |
| s_export_op is now required for exporting a filesystem. | |
| isofs, ext2, ext3, resierfs, fat | |
| can be used as examples of very different filesystems. | |
| --- | |
| [mandatory] | |
| iget4() and the read_inode2 callback have been superseded by iget5_locked() | |
| which has the following prototype, | |
| struct inode *iget5_locked(struct super_block *sb, unsigned long ino, | |
| int (*test)(struct inode *, void *), | |
| int (*set)(struct inode *, void *), | |
| void *data); | |
| 'test' is an additional function that can be used when the inode | |
| number is not sufficient to identify the actual file object. 'set' | |
| should be a non-blocking function that initializes those parts of a | |
| newly created inode to allow the test function to succeed. 'data' is | |
| passed as an opaque value to both test and set functions. | |
| When the inode has been created by iget5_locked(), it will be returned with the | |
| I_NEW flag set and will still be locked. The filesystem then needs to finalize | |
| the initialization. Once the inode is initialized it must be unlocked by | |
| calling unlock_new_inode(). | |
| The filesystem is responsible for setting (and possibly testing) i_ino | |
| when appropriate. There is also a simpler iget_locked function that | |
| just takes the superblock and inode number as arguments and does the | |
| test and set for you. | |
| e.g. | |
| inode = iget_locked(sb, ino); | |
| if (inode->i_state & I_NEW) { | |
| err = read_inode_from_disk(inode); | |
| if (err < 0) { | |
| iget_failed(inode); | |
| return err; | |
| } | |
| unlock_new_inode(inode); | |
| } | |
| Note that if the process of setting up a new inode fails, then iget_failed() | |
| should be called on the inode to render it dead, and an appropriate error | |
| should be passed back to the caller. | |
| --- | |
| [recommended] | |
| ->getattr() finally getting used. See instances in nfs, minix, etc. | |
| --- | |
| [mandatory] | |
| ->revalidate() is gone. If your filesystem had it - provide ->getattr() | |
| and let it call whatever you had as ->revlidate() + (for symlinks that | |
| had ->revalidate()) add calls in ->follow_link()/->readlink(). | |
| --- | |
| [mandatory] | |
| ->d_parent changes are not protected by BKL anymore. Read access is safe | |
| if at least one of the following is true: | |
| * filesystem has no cross-directory rename() | |
| * we know that parent had been locked (e.g. we are looking at | |
| ->d_parent of ->lookup() argument). | |
| * we are called from ->rename(). | |
| * the child's ->d_lock is held | |
| Audit your code and add locking if needed. Notice that any place that is | |
| not protected by the conditions above is risky even in the old tree - you | |
| had been relying on BKL and that's prone to screwups. Old tree had quite | |
| a few holes of that kind - unprotected access to ->d_parent leading to | |
| anything from oops to silent memory corruption. | |
| --- | |
| [mandatory] | |
| FS_NOMOUNT is gone. If you use it - just set MS_NOUSER in flags | |
| (see rootfs for one kind of solution and bdev/socket/pipe for another). | |
| --- | |
| [recommended] | |
| Use bdev_read_only(bdev) instead of is_read_only(kdev). The latter | |
| is still alive, but only because of the mess in drivers/s390/block/dasd.c. | |
| As soon as it gets fixed is_read_only() will die. | |
| --- | |
| [mandatory] | |
| ->permission() is called without BKL now. Grab it on entry, drop upon | |
| return - that will guarantee the same locking you used to have. If | |
| your method or its parts do not need BKL - better yet, now you can | |
| shift lock_kernel() and unlock_kernel() so that they would protect | |
| exactly what needs to be protected. | |
| --- | |
| [mandatory] | |
| ->statfs() is now called without BKL held. BKL should have been | |
| shifted into individual fs sb_op functions where it's not clear that | |
| it's safe to remove it. If you don't need it, remove it. | |
| --- | |
| [mandatory] | |
| is_read_only() is gone; use bdev_read_only() instead. | |
| --- | |
| [mandatory] | |
| destroy_buffers() is gone; use invalidate_bdev(). | |
| --- | |
| [mandatory] | |
| fsync_dev() is gone; use fsync_bdev(). NOTE: lvm breakage is | |
| deliberate; as soon as struct block_device * is propagated in a reasonable | |
| way by that code fixing will become trivial; until then nothing can be | |
| done. | |
| [mandatory] | |
| block truncatation on error exit from ->write_begin, and ->direct_IO | |
| moved from generic methods (block_write_begin, cont_write_begin, | |
| nobh_write_begin, blockdev_direct_IO*) to callers. Take a look at | |
| ext2_write_failed and callers for an example. | |
| [mandatory] | |
| ->truncate is gone. The whole truncate sequence needs to be | |
| implemented in ->setattr, which is now mandatory for filesystems | |
| implementing on-disk size changes. Start with a copy of the old inode_setattr | |
| and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to | |
| be in order of zeroing blocks using block_truncate_page or similar helpers, | |
| size update and on finally on-disk truncation which should not fail. | |
| inode_change_ok now includes the size checks for ATTR_SIZE and must be called | |
| in the beginning of ->setattr unconditionally. | |
| [mandatory] | |
| ->clear_inode() and ->delete_inode() are gone; ->evict_inode() should | |
| be used instead. It gets called whenever the inode is evicted, whether it has | |
| remaining links or not. Caller does *not* evict the pagecache or inode-associated | |
| metadata buffers; getting rid of those is responsibility of method, as it had | |
| been for ->delete_inode(). Caller makes sure async writeback cannot be running | |
| for the inode while (or after) ->evict_inode() is called. | |
| ->drop_inode() returns int now; it's called on final iput() with | |
| inode->i_lock held and it returns true if filesystems wants the inode to be | |
| dropped. As before, generic_drop_inode() is still the default and it's been | |
| updated appropriately. generic_delete_inode() is also alive and it consists | |
| simply of return 1. Note that all actual eviction work is done by caller after | |
| ->drop_inode() returns. | |
| As before, clear_inode() must be called exactly once on each call of | |
| ->evict_inode() (as it used to be for each call of ->delete_inode()). Unlike | |
| before, if you are using inode-associated metadata buffers (i.e. | |
| mark_buffer_dirty_inode()), it's your responsibility to call | |
| invalidate_inode_buffers() before clear_inode(). | |
| NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out | |
| if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput() | |
| may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly | |
| free the on-disk inode, you may end up doing that while ->write_inode() is writing | |
| to it. | |
| --- | |
| [mandatory] | |
| .d_delete() now only advises the dcache as to whether or not to cache | |
| unreferenced dentries, and is now only called when the dentry refcount goes to | |
| 0. Even on 0 refcount transition, it must be able to tolerate being called 0, | |
| 1, or more times (eg. constant, idempotent). | |
| --- | |
| [mandatory] | |
| .d_compare() calling convention and locking rules are significantly | |
| changed. Read updated documentation in Documentation/filesystems/vfs.txt (and | |
| look at examples of other filesystems) for guidance. | |
| --- | |
| [mandatory] | |
| .d_hash() calling convention and locking rules are significantly | |
| changed. Read updated documentation in Documentation/filesystems/vfs.txt (and | |
| look at examples of other filesystems) for guidance. | |
| --- | |
| [mandatory] | |
| dcache_lock is gone, replaced by fine grained locks. See fs/dcache.c | |
| for details of what locks to replace dcache_lock with in order to protect | |
| particular things. Most of the time, a filesystem only needs ->d_lock, which | |
| protects *all* the dcache state of a given dentry. | |
| -- | |
| [mandatory] | |
| Filesystems must RCU-free their inodes, if they can have been accessed | |
| via rcu-walk path walk (basically, if the file can have had a path name in the | |
| vfs namespace). | |
| Even though i_dentry and i_rcu share storage in a union, we will | |
| initialize the former in inode_init_always(), so just leave it alone in | |
| the callback. It used to be necessary to clean it there, but not anymore | |
| (starting at 3.2). | |
| -- | |
| [recommended] | |
| vfs now tries to do path walking in "rcu-walk mode", which avoids | |
| atomic operations and scalability hazards on dentries and inodes (see | |
| Documentation/filesystems/path-lookup.txt). d_hash and d_compare changes | |
| (above) are examples of the changes required to support this. For more complex | |
| filesystem callbacks, the vfs drops out of rcu-walk mode before the fs call, so | |
| no changes are required to the filesystem. However, this is costly and loses | |
| the benefits of rcu-walk mode. We will begin to add filesystem callbacks that | |
| are rcu-walk aware, shown below. Filesystems should take advantage of this | |
| where possible. | |
| -- | |
| [mandatory] | |
| d_revalidate is a callback that is made on every path element (if | |
| the filesystem provides it), which requires dropping out of rcu-walk mode. This | |
| may now be called in rcu-walk mode (nd->flags & LOOKUP_RCU). -ECHILD should be | |
| returned if the filesystem cannot handle rcu-walk. See | |
| Documentation/filesystems/vfs.txt for more details. | |
| permission and check_acl are inode permission checks that are called | |
| on many or all directory inodes on the way down a path walk (to check for | |
| exec permission). These must now be rcu-walk aware (flags & IPERM_FLAG_RCU). | |
| See Documentation/filesystems/vfs.txt for more details. | |
| -- | |
| [mandatory] | |
| In ->fallocate() you must check the mode option passed in. If your | |
| filesystem does not support hole punching (deallocating space in the middle of a | |
| file) you must return -EOPNOTSUPP if FALLOC_FL_PUNCH_HOLE is set in mode. | |
| Currently you can only have FALLOC_FL_PUNCH_HOLE with FALLOC_FL_KEEP_SIZE set, | |
| so the i_size should not change when hole punching, even when puching the end of | |
| a file off. | |
| -- | |
| [mandatory] | |
| ->get_sb() is gone. Switch to use of ->mount(). Typically it's just | |
| a matter of switching from calling get_sb_... to mount_... and changing the | |
| function type. If you were doing it manually, just switch from setting ->mnt_root | |
| to some pointer to returning that pointer. On errors return ERR_PTR(...). | |
| -- | |
| [mandatory] | |
| ->permission() and generic_permission()have lost flags | |
| argument; instead of passing IPERM_FLAG_RCU we add MAY_NOT_BLOCK into mask. | |
| generic_permission() has also lost the check_acl argument; ACL checking | |
| has been taken to VFS and filesystems need to provide a non-NULL ->i_op->get_acl | |
| to read an ACL from disk. | |
| -- | |
| [mandatory] | |
| If you implement your own ->llseek() you must handle SEEK_HOLE and | |
| SEEK_DATA. You can hanle this by returning -EINVAL, but it would be nicer to | |
| support it in some way. The generic handler assumes that the entire file is | |
| data and there is a virtual hole at the end of the file. So if the provided | |
| offset is less than i_size and SEEK_DATA is specified, return the same offset. | |
| If the above is true for the offset and you are given SEEK_HOLE, return the end | |
| of the file. If the offset is i_size or greater return -ENXIO in either case. | |
| [mandatory] | |
| If you have your own ->fsync() you must make sure to call | |
| filemap_write_and_wait_range() so that all dirty pages are synced out properly. | |
| You must also keep in mind that ->fsync() is not called with i_mutex held | |
| anymore, so if you require i_mutex locking you must make sure to take it and | |
| release it yourself. | |
| -- | |
| [mandatory] | |
| d_alloc_root() is gone, along with a lot of bugs caused by code | |
| misusing it. Replacement: d_make_root(inode). The difference is, | |
| d_make_root() drops the reference to inode if dentry allocation fails. | |
| -- | |
| [mandatory] | |
| The witch is dead! Well, 2/3 of it, anyway. ->d_revalidate() and | |
| ->lookup() do *not* take struct nameidata anymore; just the flags. | |
| -- | |
| [mandatory] | |
| ->create() doesn't take struct nameidata *; unlike the previous | |
| two, it gets "is it an O_EXCL or equivalent?" boolean argument. Note that | |
| local filesystems can ignore tha argument - they are guaranteed that the | |
| object doesn't exist. It's remote/distributed ones that might care... | |
| -- | |
| [mandatory] | |
| FS_REVAL_DOT is gone; if you used to have it, add ->d_weak_revalidate() | |
| in your dentry operations instead. |