blob: f3c077d82e4d4c726ef99c32189f759571feb46e [file] [log] [blame]
/*
* SAMSUNG EXYNOS USB HOST EHCI Controller
*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* Vivek Gautam <gautam.vivek@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ehci.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
#include <asm/gpio.h>
#include <asm-generic/errno.h>
#include <linux/compat.h>
#include "ehci.h"
/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;
/**
* Contains pointers to register base addresses
* for the usb controller.
*/
struct exynos_ehci {
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
struct gpio_desc vbus_gpio;
};
static struct exynos_ehci exynos;
#ifdef CONFIG_OF_CONTROL
static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
{
fdt_addr_t addr;
unsigned int node;
int depth;
node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
if (node <= 0) {
debug("EHCI: Can't get device node for ehci\n");
return -ENODEV;
}
/*
* Get the base address for EHCI controller from the device node
*/
addr = fdtdec_get_addr(blob, node, "reg");
if (addr == FDT_ADDR_T_NONE) {
debug("Can't get the EHCI register address\n");
return -ENXIO;
}
exynos->hcd = (struct ehci_hccr *)addr;
/* Vbus gpio */
gpio_request_by_name_nodev(blob, node, "samsung,vbus-gpio", 0,
&exynos->vbus_gpio, GPIOD_IS_OUT);
depth = 0;
node = fdtdec_next_compatible_subnode(blob, node,
COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
if (node <= 0) {
debug("EHCI: Can't get device node for usb-phy controller\n");
return -ENODEV;
}
/*
* Get the base address for usbphy from the device node
*/
exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
"reg");
if (exynos->usb == NULL) {
debug("Can't get the usbphy register address\n");
return -ENXIO;
}
return 0;
}
#endif
static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
{
u32 hsic_ctrl;
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
setbits_le32(&usb->usbphyctrl0,
/* Setting up the ref freq */
(CLK_24MHZ << 16) |
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(10);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
/* HSIC Phy Setting */
hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
HSIC_CTRL_FORCESLEEP |
HSIC_CTRL_SIDDQ);
clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
<< HSIC_CTRL_REFCLKDIV_SHIFT)
| ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
<< HSIC_CTRL_REFCLKSEL_SHIFT)
| HSIC_CTRL_UTMISWRST);
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
udelay(10);
clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
HSIC_CTRL_UTMISWRST);
clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
HSIC_CTRL_UTMISWRST);
udelay(20);
/* EHCI Ctrl setting */
setbits_le32(&usb->ehcictrl,
EHCICTRL_ENAINCRXALIGN |
EHCICTRL_ENAINCR4 |
EHCICTRL_ENAINCR8 |
EHCICTRL_ENAINCR16);
}
static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
{
writel(CLK_24MHZ, &usb->usbphyclk);
clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
PHYPWR_NORMAL_MASK_PHY0));
setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
udelay(10);
clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
}
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
if (cpu_is_exynos5())
exynos5_setup_usb_phy(usb);
else if (cpu_is_exynos4())
if (proid_is_exynos4412())
exynos4412_setup_usb_phy((struct exynos4412_usb_phy *)
usb);
}
static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb)
{
u32 hsic_ctrl;
/* HOST_PHY reset */
setbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
/* HSIC Phy reset */
hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
HSIC_CTRL_FORCESLEEP |
HSIC_CTRL_SIDDQ |
HSIC_CTRL_PHYSWRST);
setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
}
static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb)
{
setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 |
PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 |
PHYPWR_NORMAL_MASK_PHY0));
}
/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
if (cpu_is_exynos5())
exynos5_reset_usb_phy(usb);
else if (cpu_is_exynos4())
if (proid_is_exynos4412())
exynos4412_reset_usb_phy((struct exynos4412_usb_phy *)
usb);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
/*
* EHCI-initialization
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct exynos_ehci *ctx = &exynos;
#ifdef CONFIG_OF_CONTROL
if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) {
debug("Unable to parse device tree for ehci-exynos\n");
return -ENODEV;
}
#else
ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci();
#endif
#ifdef CONFIG_OF_CONTROL
/* setup the Vbus gpio here */
if (dm_gpio_is_valid(&ctx->vbus_gpio))
dm_gpio_set_value(&ctx->vbus_gpio, 1);
#endif
setup_usb_phy(ctx->usb);
board_usb_init(index, init);
*hccr = ctx->hcd;
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
(uint32_t)*hccr, (uint32_t)*hcor,
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the EHCI host controller.
*/
int ehci_hcd_stop(int index)
{
struct exynos_ehci *ctx = &exynos;
reset_usb_phy(ctx->usb);
return 0;
}