blob: 836515d17820f581fcc2b708c7cf7961d1f3efca [file] [log] [blame]
/*
* Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
*
* Based on dockstar.h originally written by
* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
*
* Based on sheevaplug.h originally written by
* Prafulla Wadaskar <prafulla@marvell.com>
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_GOFLEXHOME_H
#define _CONFIG_GOFLEXHOME_H
#define CONFIG_SYS_GENERIC_BOARD
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_MACH_GOFLEXHOME /* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Default GPIO configuration and LED status
*/
#define GOFLEXHOME_OE_LOW (~(0))
#define GOFLEXHOME_OE_HIGH (~(0))
#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
/* PHY related */
#define MV88E1116_LED_FCTRL_REG 10
#define MV88E1116_CPRSP_CR3_REG 21
#define MV88E1116_MAC_CTRL_REG 21
#define MV88E1116_PGADR_REG 22
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
/*
* Commands configuration
*/
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_EXT4
#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
#endif
/*
* max 4k env size is enough, but in case of nand
* it has to be rounded to sector size
*/
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
#define CONFIG_ENV_ADDR 0xC0000
#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
"ubi part root; " \
"ubifsmount ubi:root; " \
"ubifsload 0x800000 ${kernel}; " \
"bootm 0x800000"
#define CONFIG_MTDPARTS \
"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"mtdparts="CONFIG_MTDPARTS \
"kernel=/boot/uImage\0" \
"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
/*
* * SATA Driver configuration
* */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/
/*
* * RTC driver configuration
* */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */
#endif /* _CONFIG_GOFLEXHOME_H */