u-boot-imx/include/configs/mx7d_19x19_ddr3_arm2.h

/*
 * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX7D 19x19 DDR3 ARM2 board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MX7D_19X19_DDR3_ARM2_CONFIG_H
#define __MX7D_19X19_DDR3_ARM2_CONFIG_H

#define CONFIG_SYS_FSL_USDHC_NUM    3
#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */

#define PHYS_SDRAM_SIZE			SZ_1G


#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE             RGMII
#define CONFIG_ETHPRIME                 "FEC"
#define CONFIG_FEC_MXC_PHYADDR          0

#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
#define CONFIG_FEC_DMA_MINALIGN		64

/* ENET2 */
#define IMX_FEC_BASE			ENET2_IPS_BASE_ADDR
#define CONFIG_FEC_MXC_MDIO_BASE	ENET_IPS_BASE_ADDR

#ifdef CONFIG_SYS_BOOT_QSPI
#define CONFIG_SYS_USE_QSPI
#define CONFIG_ENV_IS_IN_SPI_FLASH
#elif defined CONFIG_SYS_BOOT_SPINOR
#define CONFIG_SYS_USE_SPINOR
#define CONFIG_ENV_IS_IN_SPI_FLASH
#else
#define CONFIG_SYS_USE_QSPI   /* Enable the QSPI flash at default */
#define CONFIG_ENV_IS_IN_MMC
#endif

/* I2C configs */
#define CONFIG_CMD_I2C
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE300
#define CONFIG_POWER_PFUZE300_I2C_ADDR	0x08
#endif

#ifdef CONFIG_SYS_USE_SPINOR
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#define CONFIG_SF_DEFAULT_CS   0
#endif

#define CONFIG_VIDEO

#include "mx7d_arm2.h"

#endif