| # bcmdhd |
| ##################### |
| # SDIO Basic feature |
| ##################### |
| |
| DHDCFLAGS += -Wall -Wstrict-prototypes -Dlinux -DLINUX -DBCMDRIVER \ |
| -DBCMDONGLEHOST -DUNRELEASEDCHIP -DBCMDMA32 -DBCMFILEIMAGE \ |
| -DDHDTHREAD -DSHOW_EVENTS -DBCMDBG -DWLP2P \ |
| -DWIFI_ACT_FRAME -DARP_OFFLOAD_SUPPORT \ |
| -DKEEP_ALIVE -DCSCAN -DPKT_FILTER_SUPPORT \ |
| -DEMBEDDED_PLATFORM -DPNO_SUPPORT \ |
| -DDHD_DONOT_FORWARD_BCMEVENT_AS_NETWORK_PKT \ |
| -DCUSTOMER_HW2 -DGET_CUSTOM_MAC_ENABLE |
| |
| ################# |
| # Common feature |
| ################# |
| DHDCFLAGS += -DWL_CFG80211 |
| # Print out kernel panic point of file and line info when assertion happened |
| DHDCFLAGS += -DBCMASSERT_LOG |
| |
| # keepalive |
| DHDCFLAGS += -DCUSTOM_KEEP_ALIVE_SETTING=28000 |
| |
| DHDCFLAGS += -DVSDB |
| DHDCFLAGS += -DPROP_TXSTATUS |
| |
| # For p2p connection issue |
| DHDCFLAGS += -DWL_SCB_TIMEOUT=10 |
| |
| # TDLS enable |
| DHDCFLAGS += -DWLTDLS -DWLTDLS_AUTO_ENABLE |
| # For TDLS tear down inactive time 40 sec |
| DHDCFLAGS += -DCUSTOM_TDLS_IDLE_MODE_SETTING=40000 |
| # for TDLS RSSI HIGH for establishing TDLS link |
| DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_HIGH=-60 |
| # for TDLS RSSI HIGH for tearing down TDLS link |
| DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_LOW=-70 |
| |
| # Roaming |
| DHDCFLAGS += -DROAM_AP_ENV_DETECTION |
| DHDCFLAGS += -DROAM_ENABLE -DROAM_CHANNEL_CACHE -DROAM_API |
| DHDCFLAGS += -DENABLE_FW_ROAM_SUSPEND |
| # Roaming trigger |
| DHDCFLAGS += -DCUSTOM_ROAM_TRIGGER_SETTING=-75 |
| DHDCFLAGS += -DCUSTOM_ROAM_DELTA_SETTING=10 |
| # Set PM 2 always regardless suspend/resume |
| DHDCFLAGS += -DSUPPORT_PM2_ONLY |
| |
| # For special PNO Event keep wake lock for 10sec |
| DHDCFLAGS += -DCUSTOM_PNO_EVENT_LOCK_xTIME=10 |
| DHDCFLAGS += -DMIRACAST_AMPDU_SIZE=8 |
| |
| # Early suspend |
| DHDCFLAGS += -DDHD_USE_EARLYSUSPEND |
| |
| # For Scan result patch |
| DHDCFLAGS += -DESCAN_RESULT_PATCH |
| |
| # For Static Buffer |
| ifeq ($(CONFIG_BROADCOM_WIFI_RESERVED_MEM),y) |
| DHDCFLAGS += -DCONFIG_DHD_USE_STATIC_BUF |
| DHDCFLAGS += -DENHANCED_STATIC_BUF |
| DHDCFLAGS += -DSTATIC_WL_PRIV_STRUCT |
| endif |
| ifneq ($(CONFIG_DHD_USE_SCHED_SCAN),) |
| DHDCFLAGS += -DWL_SCHED_SCAN |
| endif |
| |
| # Ioctl timeout 5000ms |
| DHDCFLAGS += -DIOCTL_RESP_TIMEOUT=5000 |
| |
| # Prevent rx thread monopolize |
| DHDCFLAGS += -DWAIT_DEQUEUE |
| |
| # Config PM Control |
| DHDCFLAGS += -DCONFIG_CONTROL_PM |
| |
| # idle count |
| DHDCFLAGS += -DDHD_USE_IDLECOUNT |
| |
| # Wi-Fi Direct |
| DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST |
| DHDCFLAGS += -DWL_CFG80211_STA_EVENT |
| DHDCFLAGS += -DWL_IFACE_COMB_NUM_CHANNELS |
| # DHDCFLAGS += -DWL_ENABLE_P2P_IF |
| |
| # For APSTA virtual interface |
| DHDCFLAGS += -DWL_VIRTUAL_APSTA |
| |
| ########################## |
| # platform type |
| # imx: NXP iMX platform |
| ########################## |
| DHDPLATFORM ?= imx |
| ifeq ($(DHDPLATFORM), imx) |
| DHDCFLAGS += -DCONFIG_DTS -DCUSTOMER_IMX |
| else |
| # XXX Disable for NXP-iMX platforms |
| # SKB TAILPAD to avoid out of boundary memory access |
| DHDCFLAGS += -DDHDENABLE_TAILPAD |
| endif |
| |
| ########################## |
| # driver type |
| # m: module type driver |
| # y: built-in type driver |
| ########################## |
| #DRIVER_TYPE ?= y |
| |
| ifeq ($(CONFIG_BCMDHD_SDIO), y) |
| DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD |
| else |
| DHDCFLAGS += -DNO_SDIO_RESET |
| endif |
| |
| ######################### |
| # Chip dependent feature |
| ######################### |
| ifneq ($(CONFIG_BCM4354),) |
| DHDCFLAGS += -DBCM4354_CHIP -DHW_OOB |
| |
| # tput enhancement |
| DHDTXGLOM ?= y |
| MAX_TXGLOM ?= 40 |
| DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128 |
| DHDCFLAGS += -DDHDTCPACK_SUPPRESS |
| DHDCFLAGS += -DUSE_WL_TXBF |
| DHDCFLAGS += -DUSE_WL_FRAMEBURST |
| DHDCFLAGS += -DRXFRAME_THREAD |
| DHDCFLAGS += -DREPEAT_READFRAME |
| DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64 |
| DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0 |
| # DHDCFLAGS += -DPROP_TXSTATUS_VSDB |
| DHDCFLAGS += -DMAX_HDR_READ=128 |
| DHDCFLAGS += -DDHD_FIRSTREAD=128 |
| DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=16 |
| |
| # New Features |
| DHDCFLAGS += -DWL11U -DPMF |
| DHDCFLAGS += -DDHD_ENABLE_LPC |
| DHDCFLAGS += -DSAR_SUPPORT |
| DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30 |
| endif |
| |
| ifneq ($(CONFIG_BCM4339),) |
| DHDCFLAGS += -DBCM4339_CHIP -DHW_OOB |
| |
| # tput enhancement |
| DHDTXGLOM ?= y |
| DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128 |
| DHDCFLAGS += -DDHDTCPACK_SUPPRESS |
| DHDCFLAGS += -DUSE_WL_TXBF |
| DHDCFLAGS += -DUSE_WL_FRAMEBURST |
| DHDCFLAGS += -DRXFRAME_THREAD |
| DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64 |
| DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0 |
| # DHDCFLAGS += -DPROP_TXSTATUS_VSDB |
| |
| # New Features |
| DHDCFLAGS += -DWL11U |
| DHDCFLAGS += -DDHD_ENABLE_LPC |
| DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30 |
| endif |
| |
| ########################## |
| # SDIO TX glomming |
| # y: enable |
| # n: disable |
| ########################## |
| DHDTXGLOM ?= n |
| ifeq ($(DHDTXGLOM), y) |
| MAX_TXGLOM ?= 32 |
| DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1 |
| DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED |
| DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=$(MAX_TXGLOM) |
| endif |
| |
| # Murata: need the following define to handle BCM43340 edge interrupt (vs level interrupt on other chipsets). |
| # Define is in imx_v7_defconfig. |
| ifeq ($(CONFIG_BCM43340),) |
| DHDCFLAGS += -DHW_OOB |
| endif |
| |
| ifneq ($(CONFIG_BCMDHD_SDIO),) |
| DHDCFLAGS += -DBDC -DOOB_INTR_ONLY -DDHD_BCMEVENTS -DMMC_SDIO_ABORT -DOOB_PARAM |
| DHDCFLAGS += -DBCMSDIO -DBCMLXSDMMC -DUSE_SDIOFIFO_IOVAR -DDHD_VERSION_NO_DATE_TIME |
| endif |
| |
| ifneq ($(CONFIG_BCMDHD_PCIE),) |
| DHDCFLAGS += -DPCIE_FULL_DONGLE -DBCMPCIE -DCUSTOM_DPC_PRIO_SETTING=-1 |
| endif |
| |
| #EXTRA_LDFLAGS += --strip-debug |
| |
| EXTRA_CFLAGS += $(DHDCFLAGS) -DDHD_DEBUG |
| EXTRA_CFLAGS += -DSRCBASE=\"$(src)\" |
| EXTRA_CFLAGS += -I$(src)/include/ -I$(src)/ |
| KBUILD_CFLAGS += -I$(LINUXDIR)/include -I$(shell pwd) |
| |
| DHDOFILES := dhd_pno.o dhd_common.o dhd_ip.o dhd_custom_gpio.o \ |
| dhd_linux.o dhd_linux_sched.o dhd_cfg80211.o dhd_linux_wq.o aiutils.o bcmevent.o \ |
| bcmutils.o bcmwifi_channels.o hndpmu.o linux_osl.o sbutils.o siutils.o \ |
| wl_android.o wl_cfg80211.o wl_cfgp2p.o wl_cfg_btcoex.o wldev_common.o wl_linux_mon.o \ |
| dhd_linux_platdev.o dhd_pno.o dhd_linux_wq.o wl_cfg_btcoex.o wl_cfgvendor.o |
| |
| ifneq ($(CONFIG_BCMDHD_SDIO),) |
| DHDOFILES += bcmsdh.o bcmsdh_linux.o bcmsdh_sdmmc.o bcmsdh_sdmmc_linux.o |
| DHDOFILES += dhd_cdc.o dhd_wlfc.o dhd_sdio.o |
| endif |
| |
| ifneq ($(CONFIG_BCMDHD_PCIE),) |
| DHDOFILES += dhd_pcie.o dhd_pcie_linux.o dhd_msgbuf.o dhd_log.o circularbuf.o |
| endif |
| |
| bcmdhd-objs := $(DHDOFILES) |
| obj-$(CONFIG_BCMDHD_SDIO) += bcmdhd.o |
| |
| all: |
| @echo "$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules" |
| @$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules |
| |
| clean: |
| rm -rf *.o *.ko *.mod.c *~ .*.cmd *.o.cmd .*.o.cmd \ |
| Module.symvers modules.order .tmp_versions modules.builtin |
| |
| install: |
| @$(MAKE) --no-print-directory -C $(KDIR) \ |
| SUBDIRS=$(CURDIR) modules_install |
