Project import generated by Copybara.
GitOrigin-RevId: 4778e278076279e3ec24136c2aeab57b1c199d13
diff --git a/ABOUT-NLS b/ABOUT-NLS
new file mode 100644
index 0000000..b1de1b6
--- /dev/null
+++ b/ABOUT-NLS
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. Installers may use special
+options at configuration time for changing the default behaviour. The
+command:
+
+ ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it. If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of June
+2010. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca
+ +--------------------------------------------------+
+ a2ps | [] [] |
+ aegis | |
+ ant-phone | |
+ anubis | |
+ aspell | [] [] |
+ bash | |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | |
+ bison-runtime | [] |
+ bluez-pin | [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] |
+ cryptsetup | |
+ dfarc | |
+ dialog | [] [] |
+ dico | |
+ diffutils | [] |
+ dink | |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ exif | |
+ fetchmail | [] |
+ findutils | [] |
+ flex | [] |
+ freedink | |
+ gas | |
+ gawk | [] [] |
+ gcal | [] |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gjay | |
+ gliv | [] |
+ glunarclock | [] [] |
+ gnubiff | |
+ gnucash | [] |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gold | |
+ gpe-aerial | |
+ gpe-beam | |
+ gpe-bluetooth | |
+ gpe-calendar | |
+ gpe-clock | [] |
+ gpe-conf | |
+ gpe-contacts | |
+ gpe-edit | |
+ gpe-filemanager | |
+ gpe-go | |
+ gpe-login | |
+ gpe-ownerinfo | [] |
+ gpe-package | |
+ gpe-sketchbook | |
+ gpe-su | [] |
+ gpe-taskmanager | [] |
+ gpe-timesheet | [] |
+ gpe-today | [] |
+ gpe-todo | |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | [] [] |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] [] [] |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] |
+ gutenprint | |
+ hello | [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | |
+ iso_639 | [] [] [] [] |
+ iso_639_3 | |
+ jwhois | |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] |
+ libc | [] [] |
+ libexif | () |
+ libextractor | |
+ libgnutls | |
+ libgpewidget | |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | [] |
+ libidn | |
+ lifelines | |
+ liferea | [] [] |
+ lilypond | |
+ linkdr | [] |
+ lordsawar | |
+ lprng | |
+ lynx | [] |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | |
+ man-db | |
+ man-db-manpages | |
+ minicom | |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | |
+ psmisc | |
+ pspp | [] |
+ pwdutils | |
+ radius | [] |
+ recode | [] [] |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | |
+ tar | [] |
+ texinfo | |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] |
+ +--------------------------------------------------+
+ af am an ar as ast az be be@latin bg bn_IN bs ca
+ 6 0 1 2 3 19 1 10 3 28 3 1 38
+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ +-------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] () |
+ anubis | [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] [] |
+ bfd | [] |
+ bibshelf | [] [] [] |
+ binutils | [] |
+ bison | [] [] |
+ bison-runtime | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] [] [] |
+ cflow | [] [] |
+ clisp | [] [] [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cppi | |
+ cpplib | [] [] [] |
+ cryptsetup | [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] |
+ dink | [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ exif | () [] [] |
+ fetchmail | [] [] () [] [] [] |
+ findutils | [] [] [] |
+ flex | [] [] |
+ freedink | [] [] [] |
+ gas | [] |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gip | [] [] [] [] |
+ gjay | [] |
+ gliv | [] [] [] |
+ glunarclock | [] [] |
+ gnubiff | () |
+ gnucash | [] () () () () |
+ gnuedu | [] [] |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] |
+ gpe-aerial | [] [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] [] [] |
+ gpe-edit | [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] () [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] |
+ grub | [] [] |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] () [] |
+ gtkam | [] [] () [] [] |
+ gtkorphan | [] [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] |
+ hello | [] [] [] [] |
+ help2man | [] |
+ hylafax | [] [] |
+ idutils | [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] [] [] [] () [] [] [] () |
+ iso_3166_2 | () |
+ iso_4217 | [] [] [] () [] [] |
+ iso_639 | [] [] [] [] () [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] [] [] [] |
+ latrine | [] () |
+ ld | [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] () |
+ libgphoto2_port | [] () [] |
+ libgsasl | |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ liferea | [] [] [] [] [] |
+ lilypond | [] [] [] |
+ linkdr | [] [] [] |
+ lordsawar | [] |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] [] [] [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] |
+ pies | |
+ popt | [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] |
+ pwdutils | [] |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rosegarden | () () () |
+ rpm | [] [] [] |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] |
+ sed | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | |
+ skencil | [] () [] |
+ solfege | [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ sysstat | [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] |
+ vice | () () |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] |
+ wyslij-po | |
+ xchat | [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] [] |
+ +-------------------------------------------------+
+ crh cs da de el en en_GB en_ZA eo es et eu fa
+ 5 64 105 117 18 1 8 0 28 89 18 19 0
+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ +----------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] [] |
+ aspell | [] [] [] [] |
+ bash | [] [] [] [] |
+ bfd | [] [] [] |
+ bibshelf | [] [] [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] |
+ bison-runtime | [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] |
+ buzztard | [] |
+ cflow | [] [] [] |
+ clisp | [] |
+ coreutils | [] [] [] [] [] |
+ cpio | [] [] [] [] |
+ cppi | [] [] |
+ cpplib | [] [] [] |
+ cryptsetup | [] [] [] |
+ dfarc | [] [] [] |
+ dialog | [] [] [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ dink | [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ exif | [] [] [] [] [] [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] |
+ freedink | [] [] [] |
+ gas | [] [] |
+ gawk | [] [] [] [] () [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] [] [] |
+ gjay | [] |
+ gliv | [] () |
+ glunarclock | [] [] [] [] |
+ gnubiff | () [] () |
+ gnucash | () () () () () [] |
+ gnuedu | [] [] |
+ gnulib | [] [] [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gold | [] [] |
+ gpe-aerial | [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-bluetooth | [] [] [] [] |
+ gpe-calendar | [] [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] [] [] |
+ gpe-contacts | [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] [] |
+ gpe-go | [] [] [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] [] |
+ gpsdrive | [] [] [] |
+ gramadoir | [] [] [] |
+ grep | [] [] |
+ grub | [] [] [] [] |
+ gsasl | [] [] [] [] [] |
+ gss | [] [] [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] [] [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] [] [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] [] [] |
+ hello | [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] |
+ iso_15924 | [] () [] [] |
+ iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | () [] [] [] |
+ iso_4217 | [] () [] [] [] [] |
+ iso_639 | [] () [] [] [] [] [] [] [] |
+ iso_639_3 | () [] [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] [] [] [] |
+ keytouch-editor | [] [] [] [] [] |
+ keytouch-keyboa... | [] [] [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] [] () |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] [] |
+ libidn | [] [] [] [] |
+ lifelines | () |
+ liferea | [] [] [] [] |
+ lilypond | [] [] |
+ linkdr | [] [] [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] [] [] |
+ m4 | [] [] [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] [] |
+ man-db | [] [] |
+ man-db-manpages | [] |
+ minicom | [] [] [] [] [] |
+ mkisofs | [] [] [] [] |
+ myserver | |
+ nano | [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] [] |
+ pies | |
+ popt | [] [] [] [] [] [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | |
+ pwdutils | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () () () () |
+ rpm | [] [] |
+ rush | |
+ sarg | [] |
+ screem | [] [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] |
+ soundtracker | [] [] |
+ sp | [] () |
+ sysstat | [] [] [] [] [] |
+ tar | [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux-ng | [] [] [] [] [] [] |
+ vice | () () () |
+ vmm | [] |
+ vorbis-tools | [] |
+ wastesedge | () () |
+ wdiff | [] |
+ wget | [] [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] [] |
+ +----------------------------------------------------+
+ fi fr ga gl gu he hi hr hu hy id is it ja ka kn
+ 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ +-----------------------------------------------+
+ a2ps | [] |
+ aegis | |
+ ant-phone | |
+ anubis | [] [] |
+ aspell | [] |
+ bash | |
+ bfd | |
+ bibshelf | [] [] |
+ binutils | |
+ bison | [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ bombono-dvd | |
+ buzztard | |
+ cflow | |
+ clisp | |
+ coreutils | [] |
+ cpio | |
+ cppi | |
+ cpplib | |
+ cryptsetup | |
+ dfarc | [] |
+ dialog | [] [] [] [] [] |
+ dico | |
+ diffutils | [] [] |
+ dink | |
+ doodle | |
+ e2fsprogs | |
+ enscript | |
+ exif | [] |
+ fetchmail | |
+ findutils | |
+ flex | |
+ freedink | [] |
+ gas | |
+ gawk | |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] |
+ gettext-tools | [] |
+ gip | [] [] |
+ gjay | |
+ gliv | |
+ glunarclock | [] |
+ gnubiff | |
+ gnucash | () () () () |
+ gnuedu | |
+ gnulib | |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gold | |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] |
+ gpe-timesheet | [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | |
+ gramadoir | |
+ grep | |
+ grub | |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] [] [] |
+ gstreamer | |
+ gtick | |
+ gtkam | [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | |
+ hello | [] [] [] |
+ help2man | |
+ hylafax | |
+ idutils | |
+ indent | |
+ iso_15924 | [] [] |
+ iso_3166 | [] [] () [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] |
+ iso_639 | [] [] |
+ iso_639_3 | [] |
+ jwhois | [] |
+ kbd | |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ klavaro | [] |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] [] |
+ libc | [] |
+ libexif | |
+ libextractor | |
+ libgnutls | [] |
+ libgpewidget | [] [] |
+ libgpg-error | |
+ libgphoto2 | |
+ libgphoto2_port | |
+ libgsasl | |
+ libiconv | |
+ libidn | |
+ lifelines | |
+ liferea | |
+ lilypond | |
+ linkdr | |
+ lordsawar | |
+ lprng | |
+ lynx | |
+ m4 | |
+ mailfromd | |
+ mailutils | |
+ make | [] |
+ man-db | |
+ man-db-manpages | |
+ minicom | [] |
+ mkisofs | |
+ myserver | |
+ nano | [] [] |
+ opcodes | |
+ parted | |
+ pies | |
+ popt | [] [] [] |
+ psmisc | |
+ pspp | |
+ pwdutils | |
+ radius | |
+ recode | |
+ rosegarden | |
+ rpm | |
+ rush | |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] |
+ sed | |
+ sharutils | |
+ shishi | |
+ skencil | |
+ solfege | [] |
+ solfege-manual | |
+ soundtracker | |
+ sp | |
+ sysstat | [] |
+ tar | [] |
+ texinfo | [] |
+ tin | |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | |
+ vice | |
+ vmm | |
+ vorbis-tools | |
+ wastesedge | |
+ wdiff | |
+ wget | [] |
+ wyslij-po | |
+ xchat | [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +-----------------------------------------------+
+ ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+ 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] [] [] [] |
+ aegis | [] [] [] |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ aspell | [] [] [] [] [] |
+ bash | [] [] |
+ bfd | [] |
+ bibshelf | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] |
+ bombono-dvd | [] () |
+ buzztard | [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cppi | [] |
+ cpplib | [] |
+ cryptsetup | [] |
+ dfarc | [] |
+ dialog | [] [] [] [] |
+ dico | [] |
+ diffutils | [] [] [] [] [] [] |
+ dink | () |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ exif | [] [] [] () [] |
+ fetchmail | [] [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ freedink | [] [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] |
+ gip | [] [] [] [] [] |
+ gjay | |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] |
+ gnubiff | [] () |
+ gnucash | [] () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] [] |
+ gold | |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-bluetooth | [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ grub | [] [] [] |
+ gsasl | [] [] [] [] |
+ gss | [] [] [] |
+ gst-plugins-bad | [] [] [] [] [] [] |
+ gst-plugins-base | [] [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] [] [] |
+ gstreamer | [] [] [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] [] [] |
+ gutenprint | [] [] |
+ hello | [] [] [] [] |
+ help2man | [] [] |
+ hylafax | [] |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | [] [] [] [] |
+ iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] [] [] |
+ iso_4217 | [] [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] [] [] |
+ iso_639_3 | [] [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] [] [] |
+ keytouch-keyboa... | [] [] [] |
+ klavaro | [] [] |
+ latrine | [] [] |
+ ld | |
+ leafpad | [] [] [] [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] () [] |
+ libextractor | |
+ libgnutls | [] [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] [] [] [] |
+ libgsasl | [] [] [] [] [] |
+ libiconv | [] [] [] [] [] |
+ libidn | [] [] |
+ lifelines | [] [] |
+ liferea | [] [] [] [] [] () () [] |
+ lilypond | [] |
+ linkdr | [] [] [] |
+ lordsawar | |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] |
+ man-db-manpages | [] [] [] |
+ minicom | [] [] [] [] |
+ mkisofs | [] [] [] |
+ myserver | |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] |
+ pies | [] |
+ popt | [] [] [] [] |
+ psmisc | [] [] [] |
+ pspp | [] [] |
+ pwdutils | [] |
+ radius | [] [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rosegarden | () () |
+ rpm | [] [] [] |
+ rush | [] [] |
+ sarg | |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] [] [] [] |
+ solfege-manual | [] [] [] |
+ soundtracker | [] |
+ sp | |
+ sysstat | [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux-ng | [] [] [] [] [] |
+ vice | [] |
+ vmm | [] |
+ vorbis-tools | [] [] |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] [] [] [] [] [] |
+ wyslij-po | [] [] [] |
+ xchat | [] [] [] [] [] [] [] [] [] |
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ +---------------------------------------------------+
+ nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
+ 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
+
+ sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ +---------------------------------------------------+
+ a2ps | [] [] [] [] [] | 27
+ aegis | [] | 9
+ ant-phone | [] [] [] [] | 9
+ anubis | [] [] [] [] | 15
+ aspell | [] [] [] | 20
+ bash | [] [] [] | 12
+ bfd | [] | 6
+ bibshelf | [] [] [] | 16
+ binutils | [] [] | 8
+ bison | [] [] | 12
+ bison-runtime | [] [] [] [] [] [] | 29
+ bluez-pin | [] [] [] [] [] [] [] [] | 37
+ bombono-dvd | [] | 4
+ buzztard | [] | 7
+ cflow | [] [] [] | 9
+ clisp | | 10
+ coreutils | [] [] [] [] | 22
+ cpio | [] [] [] [] [] [] | 13
+ cppi | [] [] | 5
+ cpplib | [] [] [] [] [] [] | 14
+ cryptsetup | [] [] | 7
+ dfarc | [] | 9
+ dialog | [] [] [] [] [] [] [] | 30
+ dico | [] | 2
+ diffutils | [] [] [] [] [] [] | 30
+ dink | | 4
+ doodle | [] [] | 7
+ e2fsprogs | [] [] [] | 11
+ enscript | [] [] [] [] | 17
+ exif | [] [] [] | 16
+ fetchmail | [] [] [] | 17
+ findutils | [] [] [] [] [] | 20
+ flex | [] [] [] [] | 15
+ freedink | [] | 10
+ gas | [] | 4
+ gawk | [] [] [] [] | 18
+ gcal | [] [] | 5
+ gcc | [] [] [] | 7
+ gettext-examples | [] [] [] [] [] [] [] | 34
+ gettext-runtime | [] [] [] [] [] [] [] | 29
+ gettext-tools | [] [] [] [] [] [] | 22
+ gip | [] [] [] [] | 22
+ gjay | [] | 3
+ gliv | [] [] [] | 14
+ glunarclock | [] [] [] [] [] | 19
+ gnubiff | [] [] | 4
+ gnucash | () [] () [] () | 10
+ gnuedu | [] [] | 7
+ gnulib | [] [] [] [] | 16
+ gnunet | [] | 1
+ gnunet-gtk | [] [] [] | 5
+ gnutls | [] [] [] | 10
+ gold | [] | 4
+ gpe-aerial | [] [] [] | 18
+ gpe-beam | [] [] [] | 19
+ gpe-bluetooth | [] [] [] | 13
+ gpe-calendar | [] [] [] [] | 12
+ gpe-clock | [] [] [] [] [] | 28
+ gpe-conf | [] [] [] [] | 20
+ gpe-contacts | [] [] [] | 17
+ gpe-edit | [] [] [] | 12
+ gpe-filemanager | [] [] [] [] | 16
+ gpe-go | [] [] [] [] [] | 25
+ gpe-login | [] [] [] | 11
+ gpe-ownerinfo | [] [] [] [] [] | 25
+ gpe-package | [] [] [] | 13
+ gpe-sketchbook | [] [] [] | 20
+ gpe-su | [] [] [] [] [] | 30
+ gpe-taskmanager | [] [] [] [] [] | 29
+ gpe-timesheet | [] [] [] [] [] | 25
+ gpe-today | [] [] [] [] [] [] | 30
+ gpe-todo | [] [] [] [] | 17
+ gphoto2 | [] [] [] [] [] | 24
+ gprof | [] [] [] | 15
+ gpsdrive | [] [] [] | 11
+ gramadoir | [] [] [] | 11
+ grep | [] [] [] | 10
+ grub | [] [] [] | 14
+ gsasl | [] [] [] [] | 14
+ gss | [] [] [] | 11
+ gst-plugins-bad | [] [] [] [] | 26
+ gst-plugins-base | [] [] [] [] [] | 24
+ gst-plugins-good | [] [] [] [] | 24
+ gst-plugins-ugly | [] [] [] [] [] | 29
+ gstreamer | [] [] [] [] | 22
+ gtick | [] [] [] | 13
+ gtkam | [] [] [] | 20
+ gtkorphan | [] [] [] | 14
+ gtkspell | [] [] [] [] [] [] [] [] [] | 45
+ gutenprint | [] | 10
+ hello | [] [] [] [] [] [] | 21
+ help2man | [] [] | 7
+ hylafax | [] | 5
+ idutils | [] [] [] [] | 17
+ indent | [] [] [] [] [] [] | 30
+ iso_15924 | () [] () [] [] | 16
+ iso_3166 | [] [] () [] [] () [] [] [] () | 53
+ iso_3166_2 | () [] () [] | 9
+ iso_4217 | [] () [] [] () [] [] | 26
+ iso_639 | [] [] [] () [] () [] [] [] [] | 38
+ iso_639_3 | [] () | 8
+ jwhois | [] [] [] [] [] | 16
+ kbd | [] [] [] [] [] | 15
+ keytouch | [] [] [] | 16
+ keytouch-editor | [] [] [] | 14
+ keytouch-keyboa... | [] [] [] | 14
+ klavaro | [] | 11
+ latrine | [] [] [] | 10
+ ld | [] [] [] [] | 11
+ leafpad | [] [] [] [] [] [] | 33
+ libc | [] [] [] [] [] | 21
+ libexif | [] () | 7
+ libextractor | [] | 1
+ libgnutls | [] [] [] | 9
+ libgpewidget | [] [] [] | 14
+ libgpg-error | [] [] [] | 9
+ libgphoto2 | [] [] | 8
+ libgphoto2_port | [] [] [] [] | 14
+ libgsasl | [] [] [] | 13
+ libiconv | [] [] [] [] | 21
+ libidn | () [] [] | 11
+ lifelines | [] | 4
+ liferea | [] [] [] | 21
+ lilypond | [] | 7
+ linkdr | [] [] [] [] [] | 17
+ lordsawar | | 1
+ lprng | [] | 3
+ lynx | [] [] [] [] | 17
+ m4 | [] [] [] [] | 19
+ mailfromd | [] [] | 3
+ mailutils | [] | 5
+ make | [] [] [] [] | 21
+ man-db | [] [] [] | 8
+ man-db-manpages | | 4
+ minicom | [] [] | 16
+ mkisofs | [] [] | 9
+ myserver | | 0
+ nano | [] [] [] [] | 21
+ opcodes | [] [] [] | 11
+ parted | [] [] [] [] [] | 15
+ pies | [] [] | 3
+ popt | [] [] [] [] [] [] | 27
+ psmisc | [] [] | 11
+ pspp | | 4
+ pwdutils | [] [] | 6
+ radius | [] [] | 9
+ recode | [] [] [] [] | 28
+ rosegarden | () | 0
+ rpm | [] [] [] | 11
+ rush | [] [] | 4
+ sarg | | 1
+ screem | [] | 3
+ scrollkeeper | [] [] [] [] [] | 27
+ sed | [] [] [] [] [] | 30
+ sharutils | [] [] [] [] [] | 22
+ shishi | [] | 3
+ skencil | [] [] | 7
+ solfege | [] [] [] [] | 16
+ solfege-manual | [] | 8
+ soundtracker | [] [] [] | 9
+ sp | [] | 3
+ sysstat | [] [] | 15
+ tar | [] [] [] [] [] [] | 23
+ texinfo | [] [] [] [] [] | 17
+ tin | | 4
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux-ng | [] [] [] [] | 20
+ vice | () () | 1
+ vmm | [] | 4
+ vorbis-tools | [] | 6
+ wastesedge | | 2
+ wdiff | [] [] | 7
+ wget | [] [] [] [] [] | 26
+ wyslij-po | [] [] | 8
+ xchat | [] [] [] [] [] [] | 36
+ xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63
+ xkeyboard-config | [] [] [] | 22
+ +---------------------------------------------------+
+ 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
+ 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
diff --git a/Android.mk b/Android.mk
new file mode 100644
index 0000000..870bf33
--- /dev/null
+++ b/Android.mk
@@ -0,0 +1,9 @@
+LOCAL_PATH := $(call my-dir)
+
+SUB_MAKEFILES := $(call all-subdir-makefiles)
+COMMON_ALSA_UTILS_INCLUDES := $(LOCAL_PATH)/include \
+ $(call include-path-for, libasound)
+COMMON_ALSA_UTILS_CFLAGS := -D_GNU_SOURCE
+COMMON_ALSA_UTILS_LIBS := asound
+
+include $(SUB_MAKEFILES)
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..06849ec
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,43 @@
+2005-08-13 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.am (EXTRA_DIST): Add config.rpath, mkinstalldirs.
+ * configure.in (AM_GNU_GETTEXT_VERSION): Bump to 0.14.4.
+
+0.0.7 -> 0.2.0
+
+* removed error message from alsamixer
+* fixes in alsactl program
+* version is now compatible with driver
+
+0.0.6 -> 0.0.7
+
+* added alsactl control program
+* updated alsamixer by Carl van Schaik <carl@dreamcoat.che.uct.ac.za>
+ - stereo record source select
+ - left/right route support
+
+0.0.5 -> 0.0.6
+
+* updates for new alsa-lib
+* fixed compilation problems with config.h header file
+* updated output 'aplay -l'
+
+0.0.3 -> 0.0.4
+
+* added check for alsa-lib package
+* added spec file for RPM
+
+0.0.2 -> 0.0.3
+
+* included great ncurses alsamixer from Tim Janik <timj@gtk.org>
+* enhanced Mixer from Andy Lo A Foe <arloafoe@cs.vu.nl> renamed to amixer
+
+0.0.1 -> 0.0.2
+
+* fixed small bug in aplay in command line parsing
+* fixed fragment size allocation for low rate files in aplay
+* a little bit corrected output from Mixer
+
+0.0.1
+
+* initial release (aplay, broken Mixer)
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..544d5d2
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,46 @@
+
+ ALSA utils installation
+ =======================
+
+Requirements
+------------
+
+alsamixer requires the ncurses library. Some systems need to install
+the develop package additionally to link with this library.
+
+alsaconf requires dialog or whiptail program to run properly.
+
+Installation
+------------
+
+For installation you can use these commands:
+
+ ./configure
+ make install
+
+If ./configure command complain that alsa-lib package isn't installed,
+please, check if --prefix option is same for alsa-lib and alsa-utils
+package. The configure script from alsa-utils package probably cannot find
+header file asoundlib.h in $prefix/include/alsa directory (usually in
+/usr/include/alsa directory).
+
+Compilation from git sources
+---------------------------
+
+You need also GNU packages autoconf and automake installed in your system
+to compile git sources of alsa-utils package.
+
+For compilation you can use these commands:
+
+ aclocal
+ gettextize
+ autoheader
+ automake --foreign --copy --add-missing
+ autoconf
+ ./configure
+ make
+
+The included gitcompile script does this job for you.
+
+Note: Some automake packages have missing aclocal program. Use newer version
+ in the case.
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..5d5c38e
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,45 @@
+INCLUDES=-I$(top_srcdir)/include
+
+SUBDIRS = include alsactl alsaucm utils m4 po
+if ALSAMIXER
+SUBDIRS += alsamixer
+endif
+if HAVE_MIXER
+SUBDIRS += amixer
+endif
+if HAVE_RAWMIDI
+SUBDIRS += amidi
+endif
+if ALSACONF
+SUBDIRS += alsaconf
+endif
+if HAVE_PCM
+SUBDIRS += aplay iecset speaker-test
+if ALSALOOP
+SUBDIRS += alsaloop
+endif
+endif
+if HAVE_SEQ
+SUBDIRS += seq
+endif
+
+EXTRA_DIST= config.rpath TODO gitcompile
+AUTOMAKE_OPTIONS=foreign
+ACLOCAL_AMFLAGS = -I m4
+
+rpm: dist
+ $(MAKE) -C $@
+
+dist-hook:
+ -chmod -R a+r $(distdir)
+ @if ! test -z "$(AMTAR)"; then \
+ $(AMTAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
+ else \
+ $(TAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
+ fi
+
+install-data-hook:
+ $(MKDIR_P) -m 0755 $(DESTDIR)$(ASOUND_STATE_DIR)
+
+DISTCHECK_CONFIGURE_FLAGS = \
+ --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..89c668d
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,797 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@ALSAMIXER_TRUE@am__append_1 = alsamixer
+@HAVE_MIXER_TRUE@am__append_2 = amixer
+@HAVE_RAWMIDI_TRUE@am__append_3 = amidi
+@ALSACONF_TRUE@am__append_4 = alsaconf
+@HAVE_PCM_TRUE@am__append_5 = aplay iecset speaker-test
+@ALSALOOP_TRUE@@HAVE_PCM_TRUE@am__append_6 = alsaloop
+@HAVE_SEQ_TRUE@am__append_7 = seq
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/alsaconf/po/Makefile.in \
+ $(top_srcdir)/configure ABOUT-NLS COPYING ChangeLog INSTALL \
+ TODO config.guess config.rpath config.sub install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES = alsaconf/po/Makefile
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ cscope distdir dist dist-all distcheck
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = include alsactl alsaucm utils m4 po alsamixer amixer \
+ amidi alsaconf aplay iecset speaker-test alsaloop seq
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+SUBDIRS = include alsactl alsaucm utils m4 po $(am__append_1) \
+ $(am__append_2) $(am__append_3) $(am__append_4) \
+ $(am__append_5) $(am__append_6) $(am__append_7)
+EXTRA_DIST = config.rpath TODO gitcompile
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
+DISTCHECK_CONFIGURE_FLAGS = \
+ --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
+
+all: all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+alsaconf/po/Makefile: $(top_builddir)/config.status $(top_srcdir)/alsaconf/po/Makefile.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+ -rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am \
+ install-data-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-cscope \
+ clean-generic cscope cscopelist cscopelist-recursive ctags \
+ ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
+ dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
+ distclean distclean-generic distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+rpm: dist
+ $(MAKE) -C $@
+
+dist-hook:
+ -chmod -R a+r $(distdir)
+ @if ! test -z "$(AMTAR)"; then \
+ $(AMTAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
+ else \
+ $(TAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
+ fi
+
+install-data-hook:
+ $(MKDIR_P) -m 0755 $(DESTDIR)$(ASOUND_STATE_DIR)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/NOTICE b/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/README b/README
new file mode 100644
index 0000000..c7e0681
--- /dev/null
+++ b/README
@@ -0,0 +1,20 @@
+
+ Advanced Linux Sound Architecture - Utilities
+ =============================================
+
+This package contains the command line utilities for the ALSA project.
+The package can be compiled only with the installed ALSA driver and
+the ALSA C library.
+
+alsaconf - the ALSA driver configurator script
+alsactl - an utility for soundcard settings management
+aplay/arecord - an utility for the playback / capture of .wav,.voc,.au files
+amixer - a command line mixer
+alsamixer - a ncurses mixer
+amidi - a utility to send/receive sysex dumps or other MIDI data
+iecset - a utility to show/set the IEC958 status bits
+
+You may give a look for more information about the ALSA project to URL
+http://www.alsa-project.org.
+
+ Jaroslav Kysela <perex@perex.cz>
diff --git a/TODO b/TODO
new file mode 100644
index 0000000..a1d880f
--- /dev/null
+++ b/TODO
@@ -0,0 +1,4 @@
+H add options to aplay to avoid xrun using arecord | aplay
+M Rewrite aplay/arecord tool and separate the experimental stuff
+M Write a *good* mixer
+L Add support for OSS setups to alsactl
diff --git a/acinclude.m4 b/acinclude.m4
new file mode 100644
index 0000000..49550f1
--- /dev/null
+++ b/acinclude.m4
@@ -0,0 +1,12 @@
+AC_DEFUN([SAVE_UTIL_VERSION], [
+SND_UTIL_VERSION=$VERSION
+echo $VERSION > $srcdir/version
+AC_DEFINE_UNQUOTED(VERSION, "$SND_UTIL_VERSION", [ALSA util version])
+AC_SUBST(SND_UTIL_VERSION)
+SND_UTIL_MAJOR=`echo $VERSION | cut -d . -f 1`
+AC_SUBST(SND_UTIL_MAJOR)
+SND_UTIL_MINOR=`echo $VERSION | cut -d . -f 2`
+AC_SUBST(SND_UTIL_MINOR)
+SND_UTIL_SUBMINOR=`echo $VERSION | cut -d . -f 3 | sed -e 's/pre[[0-9]]*//g'`
+AC_SUBST(SND_UTIL_SUBMINOR)
+])
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..2d6f36a
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1409 @@
+# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+dnl Configure Paths for Alsa
+dnl Some modifications by Richard Boulton <richard-alsa@tartarus.org>
+dnl Christopher Lansdown <lansdoct@cs.alfred.edu>
+dnl Jaroslav Kysela <perex@perex.cz>
+dnl Last modification: $Id: alsa.m4,v 1.24 2004/09/15 18:48:07 tiwai Exp $
+dnl AM_PATH_ALSA([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for libasound, and define ALSA_CFLAGS and ALSA_LIBS as appropriate.
+dnl enables arguments --with-alsa-prefix=
+dnl --with-alsa-enc-prefix=
+dnl --disable-alsatest
+dnl
+dnl For backwards compatibility, if ACTION_IF_NOT_FOUND is not specified,
+dnl and the alsa libraries are not found, a fatal AC_MSG_ERROR() will result.
+dnl
+AC_DEFUN([AM_PATH_ALSA],
+[dnl Save the original CFLAGS, LDFLAGS, and LIBS
+alsa_save_CFLAGS="$CFLAGS"
+alsa_save_LDFLAGS="$LDFLAGS"
+alsa_save_LIBS="$LIBS"
+alsa_found=yes
+
+dnl
+dnl Get the cflags and libraries for alsa
+dnl
+AC_ARG_WITH(alsa-prefix,
+[ --with-alsa-prefix=PFX Prefix where Alsa library is installed(optional)],
+[alsa_prefix="$withval"], [alsa_prefix=""])
+
+AC_ARG_WITH(alsa-inc-prefix,
+[ --with-alsa-inc-prefix=PFX Prefix where include libraries are (optional)],
+[alsa_inc_prefix="$withval"], [alsa_inc_prefix=""])
+
+dnl FIXME: this is not yet implemented
+AC_ARG_ENABLE(alsatest,
+[ --disable-alsatest Do not try to compile and run a test Alsa program],
+[enable_alsatest="$enableval"],
+[enable_alsatest=yes])
+
+dnl Add any special include directories
+AC_MSG_CHECKING(for ALSA CFLAGS)
+if test "$alsa_inc_prefix" != "" ; then
+ ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix"
+ CFLAGS="$CFLAGS -I$alsa_inc_prefix"
+fi
+AC_MSG_RESULT($ALSA_CFLAGS)
+
+dnl add any special lib dirs
+AC_MSG_CHECKING(for ALSA LDFLAGS)
+if test "$alsa_prefix" != "" ; then
+ ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix"
+ LDFLAGS="$LDFLAGS $ALSA_LIBS"
+fi
+
+dnl add the alsa library
+ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl -lpthread"
+LIBS="$ALSA_LIBS $LIBS"
+AC_MSG_RESULT($ALSA_LIBS)
+
+dnl Check for a working version of libasound that is of the right version.
+if test "x$enable_alsatest" = "xyes"; then
+min_alsa_version=ifelse([$1], ,0.1.1,$1)
+AC_MSG_CHECKING(for libasound headers version >= $min_alsa_version)
+no_alsa=""
+ alsa_min_major_version=`echo $min_alsa_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ alsa_min_minor_version=`echo $min_alsa_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ alsa_min_micro_version=`echo $min_alsa_version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+
+AC_LANG_SAVE
+AC_LANG_C
+AC_TRY_COMPILE([
+#include <alsa/asoundlib.h>
+], [
+/* ensure backward compatibility */
+#if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
+#define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
+#endif
+#if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
+#define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
+#endif
+#if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
+#define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
+#endif
+
+# if(SND_LIB_MAJOR > $alsa_min_major_version)
+ exit(0);
+# else
+# if(SND_LIB_MAJOR < $alsa_min_major_version)
+# error not present
+# endif
+
+# if(SND_LIB_MINOR > $alsa_min_minor_version)
+ exit(0);
+# else
+# if(SND_LIB_MINOR < $alsa_min_minor_version)
+# error not present
+# endif
+
+# if(SND_LIB_SUBMINOR < $alsa_min_micro_version)
+# error not present
+# endif
+# endif
+# endif
+exit(0);
+],
+ [AC_MSG_RESULT(found.)],
+ [AC_MSG_RESULT(not present.)
+ ifelse([$3], , [AC_MSG_ERROR(Sufficiently new version of libasound not found.)])
+ alsa_found=no]
+)
+AC_LANG_RESTORE
+fi
+
+dnl Now that we know that we have the right version, let's see if we have the library and not just the headers.
+if test "x$enable_alsatest" = "xyes"; then
+AC_CHECK_LIB([asound], [snd_ctl_open],,
+ [ifelse([$3], , [AC_MSG_ERROR(No linkable libasound was found.)])
+ alsa_found=no]
+)
+fi
+
+if test "x$alsa_found" = "xyes" ; then
+ ifelse([$2], , :, [$2])
+ LIBS=`echo $LIBS | sed 's/-lasound//g'`
+ LIBS=`echo $LIBS | sed 's/ //'`
+ LIBS="-lasound $LIBS"
+fi
+if test "x$alsa_found" = "xno" ; then
+ ifelse([$3], , :, [$3])
+ CFLAGS="$alsa_save_CFLAGS"
+ LDFLAGS="$alsa_save_LDFLAGS"
+ LIBS="$alsa_save_LIBS"
+ ALSA_CFLAGS=""
+ ALSA_LIBS=""
+fi
+
+dnl That should be it. Now just export out symbols:
+AC_SUBST(ALSA_CFLAGS)
+AC_SUBST(ALSA_LIBS)
+])
+
+
+# intlmacosx.m4 serial 3 (gettext-0.18)
+dnl Copyright (C) 2004-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Checks for special options needed on MacOS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+ dnl Check for API introduced in MacOS X 10.2.
+ AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+ [gt_cv_func_CFPreferencesCopyAppValue],
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
+ [CFPreferencesCopyAppValue(NULL, NULL)],
+ [gt_cv_func_CFPreferencesCopyAppValue=yes],
+ [gt_cv_func_CFPreferencesCopyAppValue=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
+ [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+ fi
+ dnl Check for API introduced in MacOS X 10.3.
+ AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
+ [gt_cv_func_CFLocaleCopyCurrent=yes],
+ [gt_cv_func_CFLocaleCopyCurrent=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
+ [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+ AC_SUBST([INTL_MACOSX_LIBS])
+])
+
+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+#
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=m4_default([$1], [0.9.0])
+ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ PKG_CONFIG=""
+ fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists. Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+ m4_default([$2], [:])
+m4_ifvaln([$3], [else
+ $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+ pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+ PKG_CHECK_EXISTS([$3],
+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+ [pkg_failed=yes])
+ else
+ pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+ AC_MSG_RESULT([no])
+ _PKG_SHORT_ERRORS_SUPPORTED
+ if test $_pkg_short_errors_supported = yes; then
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+ else
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+ m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])
+ ])
+elif test $pkg_failed = untried; then
+ AC_MSG_RESULT([no])
+ m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old. Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
+ ])
+else
+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+ AC_MSG_RESULT([yes])
+ $3
+fi[]dnl
+])# PKG_CHECK_MODULES
+
+# Copyright (C) 2002-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.12'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.12.2], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.12.2])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 17
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 19
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+[$0: two- and three-arguments forms are deprecated. For more info, see:
+http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+dnl Support for Objective C++ was only introduced in Autoconf 2.65,
+dnl but we still cater to Autoconf 2.62.
+m4_ifdef([AC_PROG_OBJCXX],
+[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for 'mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl FIXME to be removed in Automake 1.13.
+AC_DIAGNOSE([obsolete],
+[$0: this macro is deprecated, and will soon be removed.
+You should use the Autoconf-provided 'AC][_PROG_MKDIR_P' macro instead,
+and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.])
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2001-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of '-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/gettext.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/nls.m4])
+m4_include([m4/po.m4])
+m4_include([m4/progtest.m4])
+m4_include([acinclude.m4])
diff --git a/alsaconf/Makefile.am b/alsaconf/Makefile.am
new file mode 100644
index 0000000..a4f5e4a
--- /dev/null
+++ b/alsaconf/Makefile.am
@@ -0,0 +1,37 @@
+sbin_SCRIPTS = alsaconf
+man_MANS = alsaconf.8 alsaconf.fr.8
+EXTRA_DIST = $(man_MANS)
+SUBDIRS = po
+
+install-man8:
+ @for i in $(man_MANS); do \
+ ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
+ inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
+ case $$inst in \
+ *.[a-za-z]*)\
+ loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
+ loc="/$$loc"; \
+ inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
+ *)\
+ loc="";; \
+ esac; \
+ $(mkinstalldirs) $(DESTDIR)$(mandir)$$loc/man$$ext; \
+ echo " $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
+ $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
+ done
+
+uninstall-man8:
+ @for i in $(man_MANS); do \
+ ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
+ inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
+ case $$inst in \
+ *.[a-za-z]*)\
+ loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
+ loc="/$$loc"; \
+ inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
+ *)\
+ loc="";; \
+ esac; \
+ echo " rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
+ rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
+ done
diff --git a/alsaconf/Makefile.in b/alsaconf/Makefile.in
new file mode 100644
index 0000000..fafabbf
--- /dev/null
+++ b/alsaconf/Makefile.in
@@ -0,0 +1,719 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = alsaconf
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(srcdir)/alsaconf.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES = alsaconf
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
+SCRIPTS = $(sbin_SCRIPTS)
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+sbin_SCRIPTS = alsaconf
+man_MANS = alsaconf.8 alsaconf.fr.8
+EXTRA_DIST = $(man_MANS)
+SUBDIRS = po
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaconf/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign alsaconf/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+alsaconf: $(top_builddir)/config.status $(srcdir)/alsaconf.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-sbinSCRIPTS: $(sbin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(SCRIPTS) $(MANS)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-sbinSCRIPTS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinSCRIPTS
+
+uninstall-man: uninstall-man8
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic cscopelist \
+ cscopelist-recursive ctags ctags-recursive distclean \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man8 install-pdf \
+ install-pdf-am install-ps install-ps-am install-sbinSCRIPTS \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
+ tags-recursive uninstall uninstall-am uninstall-man \
+ uninstall-man8 uninstall-sbinSCRIPTS
+
+
+install-man8:
+ @for i in $(man_MANS); do \
+ ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
+ inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
+ case $$inst in \
+ *.[a-za-z]*)\
+ loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
+ loc="/$$loc"; \
+ inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
+ *)\
+ loc="";; \
+ esac; \
+ $(mkinstalldirs) $(DESTDIR)$(mandir)$$loc/man$$ext; \
+ echo " $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
+ $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
+ done
+
+uninstall-man8:
+ @for i in $(man_MANS); do \
+ ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
+ inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
+ case $$inst in \
+ *.[a-za-z]*)\
+ loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
+ loc="/$$loc"; \
+ inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
+ *)\
+ loc="";; \
+ esac; \
+ echo " rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
+ rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
+ done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/alsaconf/alsaconf.8 b/alsaconf/alsaconf.8
new file mode 100644
index 0000000..a3e1296
--- /dev/null
+++ b/alsaconf/alsaconf.8
@@ -0,0 +1,102 @@
+.\" Hey, EMACS: -*- nroff -*-
+.\" alsaconf.8 is copyright 2003 by Jordi Mallach <jordi@debian.org>
+.\"
+.\" This is free documentation, see the latest version of the GNU
+.\" General Public License for copying conditions. There is NO warranty.
+.TH ALSACONF 8 "February 23, 2003"
+
+.SH NAME
+alsaconf \- configuration tool for the Advanced Linux Sound Architecture
+
+.SH SYNOPSIS
+.B alsaconf
+.RI [ options ]
+
+.SH DESCRIPTION
+This manual page documents briefly the
+.B alsaconf
+command.
+This manual page was written for the Debian distribution because the
+original program does not have a manual page.
+.PP
+\fBAlsaconf\fP is a simple shell script which tries to detect the sound cards
+on your system and writes a suitable configuration file for ALSA. It will try
+to guess what GNU/Linux distribution you're running, and will act accordingly
+to the standards of that distribution, if specific support is available.
+.PP
+Alsaconf will write a module-init-tools (or modutils) snippet which can be then used by module-init-tools (or modutils)
+to load the correct parameters for your sound card.
+
+.SH OPTIONS
+Alsaconf accepts the following options:
+.TP
+.B \-c, \-\-config file
+Specify the module config file.
+As default,
+.B alsaconf
+probes the available config file automatically.
+.TP
+.B \-d, \-\-devmode mode
+Set the device mode for the ALSA devices (default = 0666).
+This option is obsolete in the recent ALSA version.
+.TP
+.B \-g, \-\-gid gid
+Set the gid for the ALSA devices (default = 0).
+This option is obsolete in the recent ALSA version.
+.TP
+.B \-h, \-\-help
+Displays this help text.
+.TP
+.B \-L, \-\-log file
+Logging on the given file. The log is appended to the file.
+This option is for debugging purpose only.
+.TP
+.B \-l, \-\-legacy
+Check only for legacy non-isapnp cards.
+.TP
+.B \-m, \-\-modinfo
+Read module descriptions instead of reading a card database.
+.TP
+.B \-P, \-\-listprobe
+List the supported legacy card modules.
+.TP
+.B \-p, \-\-probe card-name
+Probe a legacy non-isapnp card and print module options.
+.TP
+.B \-r, \-\-strict
+Set strict device mode (equiv. with \-g 17 \-d 0660).
+This option is obsolete in the recent ALSA version.
+.TP
+.B \-s, \-\-sound\-wav\-file
+Use the specified wav file as a test sound.
+.TP
+.B \-u, \-\-uid uid
+Set the uid for the ALSA devices (default = 0).
+This option is obsolete in the recent ALSA version.
+
+.SH DEBIAN SPECIFIC
+In Debian, the default gid of the device files is 29 (corresponding to the
+audio group) and the default device mode is 0660.
+
+For the ALSA base package, see also
+.I /usr/share/doc/alsa\-base/
+
+.SH SEE ALSO
+\fB
+alsamixer(1),
+amixer(1),
+aplay(1),
+arecord(1)
+\fP
+
+.SH HOMEPAGE
+http://www.alsa\-project.org/
+
+.SH AUTHOR
+The alsaconf script was written by
+Takashi Iwai <tiwai@suse.de>,
+Bernd Kaindl <bk@suse.de> and
+Jan Ondrej (SAL) <ondrejj@salstar.sk>
+
+This manual page was written by Jordi Mallach <jordi@debian.org>,
+for the Debian system (but may be used by others).
diff --git a/alsaconf/alsaconf.fr.8 b/alsaconf/alsaconf.fr.8
new file mode 100644
index 0000000..14bbea8
--- /dev/null
+++ b/alsaconf/alsaconf.fr.8
@@ -0,0 +1,111 @@
+.\" Hey, EMACS: -*- nroff -*-
+.\" alsaconf.8 is copyright 2003 by Jordi Mallach <jordi@debian.org>
+.\"
+.\" This is free documentation, see the latest version of the GNU
+.\" General Public License for copying conditions. There is NO warranty.
+.TH ALSACONF 8 "15 mars 2005"
+
+.SH NOM
+alsaconf \- outil de configuration pour ALSA (architecture de son avancée de Linux)
+.\" configuration tool for the Advanced Linux Sound Architecture
+
+.SH SYNOPSIS
+.B alsaconf
+.RI [ options ]
+
+.SH DESCRIPTION
+Cette page de manuel documente brièvement la commande
+.B alsaconf.
+
+.PP
+\fBAlsaconf\fP
+est un simple script shell qui essaye de détecter les cartes son sur votre
+système et écrit un fichier de configuration adéquat pour ALSA. Il va
+essayer de deviner quelle distribution GNU/Linux vous utilisez, et agira
+conformément aux standards de cette distribution, si un support spécifique
+est disponible.
+
+.PP
+Alsaconf va écrire un fragment de code modutils qui peut être ensuite
+utilisé par modutils pour charger les paramètres corrects de votre carte
+son.
+
+.SH OPTIONS
+Alsaconf accepte les options suivantes\ :
+
+.TP
+.B \-l, \-\-legacy
+Cherche seulement les anciennes cartes non-isapnp
+
+.TP
+.B \-m, \-\-modinfo
+Lit les descriptions de modules au lieu de lire une base de données de
+carte
+
+.TP
+.B \-s, \-\-sound\-wav\-file
+Utilise le fichier wav spécifié comme son de test
+
+.TP
+.B \-u, \-\-uid uid
+Choisit l'uid pour les périphériques ALSA (valeur par défaut\ = 0)
+
+.TP
+.B \-g, \-\-gid gid
+Choisit le gid pour les périphériques ALSA (valeur par défaut\ = 0)
+
+.TP
+.B \-d, \-\-devmode mode
+Choisit le mode du périphérique pour les périphériques ALSA (valeur par
+défaut\ : 0666)
+
+.TP
+.B \-r, \-\-strict
+Choisit le mode de périphérique strict (équivaut à -g\ 17 -d\ 0660)
+
+.TP
+.B \-L, \-\-log
+Mise en journal dans /tmp/alsaconf.log
+
+.TP
+.B \-p, \-\-probe card-name
+Teste une ancienne carte non-isapnp et affiche les options du module
+
+.TP
+.B \-h, \-\-help
+Affiche ce message d'aide
+
+
+.SH POUR DEBIAN EXCLUSIVEMENT
+Sous Debian, le gid par défaut des fichiers de périphériques est 29 (qui
+correspond au groupe audio) et le mode par défaut des périphériques est
+0660.
+
+Pour le paquetage de base ALSA, voir aussi
+.I /usr/share/doc/alsa-base/
+
+.SH VOIR AUSSI
+\fB
+alsamixer(1),
+amixer(1),
+aplay(1),
+arecord(1)
+\fP
+
+.SH PAGE D'ACCUEIL
+http://www.alsa-project.org/
+
+.SH AUTEUR
+Le script alsaconf fut écrit par
+Takashi Iwai <tiwai@suse.de>,
+Bernd Kaindl <bk@suse.de> et
+Jan Ondrej (SAL) <ondrejj@salstar.sk>
+
+Cette page de manuel fut écrite par Jordi Mallach <jordi@debian.org>, pour
+le système Debian (mais elle peut être utilisée par d'autres).
+
+.SH TRADUCTION
+Baptiste Mélès 2005.
+
+N'hésitez pas à signaler à l'auteur ou au traducteur, selon le cas, toute
+erreur dans cette page de manuel.
diff --git a/alsaconf/alsaconf.in b/alsaconf/alsaconf.in
new file mode 100644
index 0000000..5c23787
--- /dev/null
+++ b/alsaconf/alsaconf.in
@@ -0,0 +1,1451 @@
+#!/bin/bash
+#
+# ALSA Configurator
+#
+# Copyright (c) 1999-2002 SuSE GmbH
+# Jan ONDREJ
+#
+# written by Takashi Iwai <tiwai@suse.de>
+# Bernd Kaindl <bk@suse.de>
+# Jan ONDREJ (SAL) <ondrejj@salstar.sk>
+#
+# based on the original version of Jan ONDREJ's alsaconf for ALSA 0.4.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+
+export TEXTDOMAIN=alsaconf
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+bindir=@bindir@
+sbindir=@sbindir@
+version=@VERSION@
+USE_NLS=@USE_NLS@
+
+# Useful for debugging
+PROCFS="/proc"
+SYSFS="/sys"
+
+# i18n stuff
+if test "$USE_NLS" = "yes" && type -p gettext > /dev/null; then
+ xecho() {
+ gettext -s "$*"
+ }
+else
+ xecho() {
+ echo "$*"
+ }
+ gettext() {
+ echo -n "$*"
+ }
+fi
+xmsg() {
+ msg=$(gettext "$1")
+ shift
+ printf "$msg" $*
+}
+
+# Check for GNU/Linux distributions
+if [ -f /etc/SuSE-release ]; then
+ distribution="suse"
+ suse_version=$(grep 'VERSION = ' /etc/SuSE-release | sed -e s/'VERSION = '//)
+elif [ -f /etc/UnitedLinux-release ]; then
+ distribution="suse"
+elif [ -f /etc/gentoo-release ]; then
+ distribution="gentoo"
+elif [ -f /etc/debian_version ]; then
+ distribution="debian"
+elif [ -f /etc/mandrake-release ]; then
+ distribution="mandrake"
+elif test -f /etc/redhat-release && grep -q "Red Hat" /etc/redhat-release; then
+ distribution="redhat"
+elif test -f /etc/fedora-release && grep -q "Fedora" /etc/fedora-release; then
+ distribution="fedora"
+elif [ -f /etc/slackware-version -o -f /etc/slamd64-version ]; then
+ distribution="slackware"
+else
+ distribution="unknown"
+fi
+
+for prog in lspci lsmod; do
+ for path in /sbin /usr/sbin /bin /usr/bin;do
+ test -x $path/$prog && eval $prog=$path/$prog
+ done
+done
+unset prog path
+
+usage() {
+ xecho "ALSA configurator"
+ echo " version $version"
+ xecho "usage: alsaconf [options]
+ -l|--legacy check only legacy non-isapnp cards
+ -m|--modinfo read module descriptions instead of reading card db
+ -s|--sound wav-file
+ use the specified wav file as a test sound
+ -u|--uid uid set the uid for the ALSA devices (default = 0) [obsoleted]
+ -g|--gid gid set the gid for the ALSA devices (default = 0) [obsoleted]
+ -d|--devmode mode
+ set the permission for ALSA devices (default = 0666) [obs.]
+ -r|--strict set strict device mode (equiv. with -g 17 -d 0660) [obsoleted]
+ -L|--log file logging on the specified file (for debugging purpose only)
+ -p|--probe card-name
+ probe a legacy non-isapnp card and print module options
+ -P|--listprobe list the supported legacy card modules
+ -c|--config file
+ specify the module config file
+ -R|--resources list available DMA and IRQ resources with debug for legacy
+ -h|--help what you're reading"
+}
+
+OPTS=`getopt -o lmL:hp:Pu:g:d:rs:c:R --long legacy,modinfo,log:,help,probe:,listprobe,uid:,gid:,devmode:,strict,sound:,config:,resources -n alsaconf -- "$@"` || exit 1
+eval set -- "$OPTS"
+
+do_legacy_only=0
+use_modinfo_db=0
+alsa_uid=0
+alsa_gid=0
+alsa_mode=0666
+legacy_probe_card=""
+LOGFILE=""
+TESTSOUND="@TESTSOUND@"
+try_all_combination=0
+resources="false"
+
+# legacy support
+LEGACY_CARDS="opl3sa2 cs4236 cs4232 cs4231 es18xx es1688 sb16 sb8"
+
+while true ; do
+ case "$1" in
+ -l|--legacy)
+ do_legacy_only=1; shift ;;
+ -m|--modinfo)
+ use_modinfo_db=1; shift ;;
+ -s|--sound)
+ TESTSOUND=$2; shift 2;;
+ -h|--help)
+ usage; exit 0 ;;
+ -L|--log)
+ LOGFILE="$2"; shift 2;;
+ -p|--probe)
+ legacy_probe_card="$2"; shift 2;;
+ -P|--listprobe)
+ echo "$LEGACY_CARDS"; exit 0;;
+ -u|--uid)
+ alsa_uid="$2"; shift 2;;
+ -g|--gid)
+ alsa_gid="$2"; shift 2;;
+ -d|--devmode)
+ alsa_mode="$2"; shift 2;;
+ -r|--strict)
+ alsa_uid=0; alsa_gid=17; alsa_mode=0660; shift;;
+ -c|--config)
+ cfgfile="$2"; shift 2;;
+ -R|--resources)
+ resources="true"; shift;;
+ --) shift ; break ;;
+ *) usage ; exit 1 ;;
+ esac
+done
+
+#
+# probe legacy ISA cards
+#
+
+check_dma_avail () {
+ list=""
+ if [ -d $SYSFS/bus/pnp/devices ]; then
+ for dma in $*; do
+ ok="true"
+ for i in $SYSFS/bus/pnp/devices/??:* ; do
+ if grep -q "state = active" $i/resources ; then
+ if grep -q '^dma '$dma'$' $i/resources; then
+ ok="false"
+ fi
+ fi
+ done
+ if [ -r $PROCFS/dma ]; then
+ if grep -q '^ *'$dma': ' $PROCFS/dma ; then
+ ok="false"
+ fi
+ fi
+ if [ "$ok" = "true" ]; then
+ list="$list $dma"
+ fi
+ done
+ else
+ if [ -r $PROCFS/dma ]; then
+ for dma in $*; do
+ grep -q '^ *'$dma': ' $PROCFS/dma || list="$list $dma"
+ done
+ fi
+ fi
+ if [ ! -z "$list" ]; then
+ echo $list
+ fi
+}
+
+check_irq_avail () {
+ list=""
+ if [ -d $SYSFS/bus/pnp/devices ]; then
+ for irq in $*; do
+ ok="true"
+ for i in $SYSFS/bus/pnp/devices/??:* ; do
+ if grep -q "state = active" $i/resources ; then
+ if grep -q '^irq '$irq'$' $i/resources; then
+ ok="false"
+ fi
+ fi
+ done
+ if [ -r $PROCFS/interrupts ]; then
+ if grep -q '^ *'$irq': ' $PROCFS/interrupts ; then
+ ok="false"
+ fi
+ fi
+ if [ "$ok" = "true" ]; then
+ list="$list $irq"
+ fi
+ done
+ else
+ if [ -r $PROCFS/interrupts ]; then
+ for irq in $*; do
+ grep -q '^ *'$irq': ' $PROCFS/interrupts || list="$list $irq"
+ done
+ fi
+ fi
+ if [ ! -z "$list" ]; then
+ echo $list
+ fi
+}
+
+#
+#
+#
+
+if [ "$resources" = "true" ]; then
+ if [ -d $SYSFS/bus/pnp/devices ]; then
+ for i in $SYSFS/bus/pnp/devices/??:* ; do
+ if [ "$resources" = "true" ]; then
+ echo ">>>>> PnP file: $i/resources"
+ cat $i/resources
+ fi
+ done
+ fi
+ if [ -r $PROCFS/dma ]; then
+ echo ">>>>> Allocated dma channels:"
+ cat $PROCFS/dma
+ fi
+ if [ -r $PROCFS/interrupts ]; then
+ echo ">>>>> Allocated interrupt channels:"
+ cat $PROCFS/interrupts
+ fi
+ echo -n "Valid DMA channels: "
+ check_dma_avail 0 1 2 3 4 5 6 7
+ echo -n "Valid IRQ channels: "
+ check_irq_avail 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+ exit 0
+fi
+
+# Check for root privileges
+if [ `id -u` -ne 0 ]; then
+ xecho "You must be root to use this script."
+ exit 1
+fi
+
+#
+# check the snd_ prefix for ALSA module options
+# snd_ prefix is obsoleted since 0.9.0rc4.
+#
+if /sbin/modinfo -p snd | grep -q snd_ ; then
+ mpfx="snd_"
+else
+ mpfx=""
+fi
+
+alsa_device_opts=""
+if /sbin/modinfo -p snd | grep -q uid ; then
+ if [ x"$alsa_uid" != x0 ]; then
+ alsa_device_opts="$alsa_device_opts ${mpfx}device_uid=$alsa_uid"
+ fi
+ if [ x"$alsa_gid" != x0 ]; then
+ alsa_device_opts="$alsa_device_opts ${mpfx}device_gid=$alsa_gid"
+ fi
+fi
+if /sbin/modinfo -p snd | grep -q device_mode ; then
+ if [ x"$alsa_mode" != x0 ]; then
+ alsa_device_opts="$alsa_device_opts ${mpfx}device_mode=$alsa_mode"
+ fi
+fi
+
+case `uname -r` in
+2.6.*)
+ kernel="new"
+ ;;
+*)
+ kernel="old"
+ ;;
+esac
+
+# cfgfile = base config file to remove/update the sound setting
+# cfgout = new config file to write the sound setting (if different from $cfgfile)
+cfgout=""
+cfgoldout=""
+if [ -n "$cfgfile" ]; then
+ if [ ! -r "$cfgfile" ]; then
+ xecho "ERROR: The config file doesn't exist: "
+ echo $cfgfile
+ exit 1
+ fi
+else
+if [ "$distribution" = "gentoo" ]; then
+ cfgfile="/etc/modules.d/alsa"
+elif [ "$kernel" = "new" ]; then
+ cfgfile="/etc/modprobe.conf"
+ if [ -d /etc/modprobe.d ]; then
+ cfgout="/etc/modprobe.d/50-sound.conf"
+ cfgoldout="/etc/modprobe.d/sound"
+ if [ ! -f $cfgout ]; then
+ modver=$(modprobe -V | sed -e's/^module-init-tools version //')
+ case "$modver" in
+ 3.[789]*)
+ ;;
+ *)
+ cfgout="/etc/modprobe.d/sound"
+ cfgoldout=""
+ ;;
+ esac
+ fi
+ fi
+elif [ "$distribution" = "debian" ]; then
+ cfgfile="/etc/modutils/sound"
+elif [ -e /etc/modules.conf ]; then
+ cfgfile="/etc/modules.conf"
+elif [ -e /etc/conf.modules ]; then
+ cfgfile="/etc/conf.modules"
+else
+ cfgfile="/etc/modules.conf"
+ touch /etc/modules.conf
+fi
+fi
+
+# Check for dialog, whiptail, gdialog, awk, ... ?
+if type -p dialog > /dev/null; then
+ DIALOG=dialog
+else
+ if type -p whiptail > /dev/null; then
+ whiptail_wrapper() {
+ X1="$1"
+ X2="$2"
+ if [ $1 = --yesno ]; then
+ X3=`expr $3 + 2`
+ else
+ X3=$3
+ fi
+ shift 3
+ whiptail "$X1" "$X2" $X3 "$@"
+ }
+ DIALOG=whiptail_wrapper
+ else
+ xecho "Error, dialog or whiptail not found."
+ exit 1
+ fi
+fi
+if type -p awk > /dev/null; then :
+else
+ xecho "Error, awk not found. Can't continue."
+ exit 1
+fi
+
+#
+# remove entries by yast2 sound configurator
+#
+remove_y2_block() {
+ awk '
+ /^alias sound-slot-[0-9]/ { next }
+ /^alias char-major-116 / { next }
+ /^alias char-major-14 / { next }
+ /^alias snd-card-[0-9] / { next }
+ /^options snd / { next }
+ /^options snd-/ { next }
+ /^options off / { next }
+ /^alias sound-service-[0-9]/ { next }
+ /^# YaST2: sound / { next }
+ { print }'
+}
+
+#
+# remove entries by sndconfig sound configurator
+#
+# found strings to search for in WriteConfModules,
+# from sndconfig 0.68-4 (rawhide version)
+
+remove_sndconfig_block() {
+ awk '
+ /^alias sound-slot-0/ { modulename = $3 ; next }
+ /^alias sound-slot-[0-9]/ { next }
+ /^post-install sound-slot-[0-9] / { next }
+ /^pre-remove sound-slot-[0-9] / { next }
+ /^options sound / { next }
+ /^alias synth0 opl3/ { next }
+ /^options opl3 / { next }
+ /^alias midi / { mididev = $3 ; next }
+ /^options / { if ($2 == mididev) next }
+ /^pre-install / { if ($2 == mididev) next }
+ /^alias synth0 / { synth = $3 ; next }
+ /^post-install / { if ($2 == synth) next }
+ /^options sb / { next }
+ /^post-install .+ \/bin\/modprobe "aci"/ { if ($2 == modulename) next }
+ /^options adlib_card / { next }
+ /^options .+ isapnp=1/ { if ($2 == modulename) next }
+ /^options i810_audio / { next }
+ /^options / {if ($2 == modulename) next }
+ { print }'
+}
+
+#
+# remove the previous configuration by alsaconf
+#
+remove_ac_block() {
+ awk '/^'"$ACB"'$/,/^'"$ACE"'$/ { next } { print }'
+}
+
+#
+# set default mixer volumes
+#
+set_mixers() {
+ amixer -s -q <<EOF
+set Master 75% unmute
+set Master -12dB
+set 'Master Mono' 75% unmute
+set 'Master Mono' -12dB
+set Front 75% unmute
+set Front -12dB
+set PCM 90% unmute
+set PCM 0dB
+mixer Synth 90% unmute
+mixer Synth 0dB
+mixer CD 90% unmute
+mixer CD 0dB
+# mute mic
+set Mic 0% mute
+# ESS 1969 chipset has 2 PCM channels
+set PCM,1 90% unmute
+set PCM,1 0dB
+# Trident/YMFPCI/emu10k1
+set Wave 100% unmute
+set Music 100% unmute
+set AC97 100% unmute
+# CS4237B chipset:
+set 'Master Digital' 75% unmute
+# Envy24 chips with analog outs
+set DAC 90% unmute
+set DAC -12dB
+set DAC,0 90% unmute
+set DAC,0 -12dB
+set DAC,1 90% unmute
+set DAC,1 -12dB
+# some notebooks use headphone instead of master
+set Headphone 75% unmute
+set Headphone -12dB
+set Playback 100% unmute
+# turn off digital switches
+set "SB Live Analog/Digital Output Jack" off
+set "Audigy Analog/Digital Output Jack" off
+EOF
+}
+
+
+# INTRO
+intro() {
+ local msg=$(xmsg "
+ ALSA CONFIGURATOR
+ version %s
+
+ This script is a configurator for
+ Advanced Linux Sound Architecture (ALSA) driver.
+
+
+ If ALSA is already running, you should close all sound
+ apps now and stop the sound driver.
+ alsaconf will try to do this, but it's not 100%% sure." $version)
+ $DIALOG --msgbox "$msg" 20 63 || acex 0
+}
+
+# FAREWELL
+farewell() {
+ local msg=$(gettext "
+
+ OK, sound driver is configured.
+
+ ALSA CONFIGURATOR
+
+ will prepare the card for playing now.
+
+ Now I'll run alsasound init script, then I'll use
+ amixer to raise the default volumes.
+ You can change the volume later via a mixer
+ program such as alsamixer or gamix.
+
+ ")
+ $DIALOG --msgbox "$msg" 17 60 || acex 0
+}
+
+# Exit function
+acex() {
+ cleanup
+ clear
+ exit $1
+}
+
+#
+# search for alsasound init script
+#
+
+if [ "$distribution" = "debian" ]; then
+ rcalsasound=/etc/init.d/alsa
+elif [ -x /etc/rc.d/rc.alsa ]; then
+ rcalsasound=/etc/rc.d/rc.alsa
+elif [ -x /etc/init.d/alsasound ]; then
+ rcalsasound=/etc/init.d/alsasound
+elif [ -x /usr/sbin/rcalsasound ]; then
+ rcalsasound=/usr/sbin/rcalsasound
+elif [ -x /sbin/rcalsasound ]; then
+ rcalsasound=/sbin/rcalsasound
+elif [ -x /etc/rc.d/init.d/alsasound ]; then
+ rcalsasound=/etc/rc.d/init.d/alsasound
+elif [ -x /etc/init.d/alsa ]; then
+ rcalsasound=/etc/init.d/alsa
+else
+ rcalsasound=rcalsasound
+fi
+
+
+# MAIN
+if [ -d $PROCFS/asound ]; then
+ $rcalsasound stop >/dev/null 2>&1
+ $rcalsasound unload >/dev/null 2>&1
+ /sbin/rmmod dmasound dmasound_awacs 2>/dev/null
+fi
+
+
+cleanup () {
+ killall -9 aplay arecord >/dev/null 2>&1
+ /sbin/modprobe -r isapnp >/dev/null 2>&1
+ /sbin/modprobe -r isa-pnp >/dev/null 2>&1
+ rm -f "$TMP" "$addcfg" "$FOUND" "$DUMP"
+}
+trap cleanup 0
+
+TMP=`mktemp -q /tmp/alsaconf.XXXXXX`
+if [ $? -ne 0 ]; then
+ xecho "Can't create temp file, exiting..."
+ exit 1
+fi
+addcfg=`mktemp -q /tmp/alsaconf.XXXXXX`
+if [ $? -ne 0 ]; then
+ xecho "Can't create temp file, exiting..."
+ exit 1
+fi
+FOUND=`mktemp -q /tmp/alsaconf.XXXXXX`
+if [ $? -ne 0 ]; then
+ xecho "Can't create temp file, exiting..."
+ exit 1
+fi
+DUMP=`mktemp -q /tmp/alsaconf.XXXXXX`
+if [ $? -ne 0 ]; then
+ xecho "Can't create temp file, exiting..."
+ exit 1
+fi
+
+# convert ISA PnP id number to string 'ABC'
+convert_isapnp_id () {
+ if [ -z "$1" ]; then
+ echo "XXXX"
+ return
+ fi
+ let a='('$1'>>2) & 0x3f'
+ let b='(('$1' & 0x03) << 3) | (('$1' >> 13) & 0x07)'
+ let c='('$1'>> 8) & 0x1f'
+ strs='@ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+ echo ${strs:$a:1}${strs:$b:1}${strs:$c:1}
+}
+
+# swap high & low bytes
+swap_number () {
+ if [ -z "$1" ]; then
+ echo "0000"
+ return
+ fi
+ let v='(('$1'>>8)&0xff)|(('$1'&0xff)<<8)'
+ printf "%04x" $v
+}
+
+# build card database
+# build_card_db filename
+build_card_db () {
+ MODDIR=/lib/modules/`uname -r`
+ last_driver=""
+ echo -n > $1
+
+ # list pci cards
+ while read driver vendor device dummy; do
+ if expr $driver : 'snd-.*' >/dev/null ; then
+ if [ "$last_driver" != "$driver" ]; then
+ echo $driver.o
+ last_driver=$driver
+ fi
+ id1=`printf '0x%04x' $vendor`
+ id2=`printf '0x%04x' $device`
+ echo "PCI: $id1=$id2"
+ fi
+ done < $MODDIR/modules.pcimap >> $1
+
+ # list isapnp cards
+ while read driver cardvendor carddevice data vendor func; do
+ if expr $driver : 'snd-.*' >/dev/null ; then
+ if [ "$last_driver" != "$driver" ]; then
+ echo $driver.o
+ last_driver=$driver
+ fi
+ id1=`convert_isapnp_id $cardvendor`
+ dev1=`swap_number $carddevice`
+ id2=`convert_isapnp_id $vendor`
+ dev2=`swap_number $func`
+ echo "ISAPNP: $id1$dev1=$id2$dev2"
+ fi
+ done < $MODDIR/modules.isapnpmap >> $1
+}
+
+#
+# probe cards
+#
+probe_cards () {
+ found="0"
+ test -r $PROCFS/isapnp || /sbin/modprobe isapnp >/dev/null 2>&1
+ test -r $PROCFS/isapnp || /sbin/modprobe isa-pnp >/dev/null 2>&1
+ if [ -r $PROCFS/isapnp ]; then
+ cat $PROCFS/isapnp >"$DUMP"
+ found="1"
+ elif [ -d $SYSFS/bus/pnp/devices ]; then
+ # use 2.6 kernel's sysfs output
+ # fake the isapnp dump
+ index=0
+ bindex=0
+ for d1 in $SYSFS/devices/pnp* ; do
+ for d2 in $d1/*:* ; do
+ if [ -r $d2/card_id ]; then
+ id=`cat $d2/card_id`
+ name=`cat $d2/name`
+ echo "Card $index '$id:$name' " >> "$DUMP"
+ index=$[$index+1]
+ found="1"
+ else if [ -r $d2/id ]; then
+ # FIXME: multiple id might be present (separated with new-line)
+ id=`head -n 1 $d2/id`
+ echo "BIOS $bindex '$id' " >> "$DUMP"
+ bindex=$[$bindex+1]
+ found="1"
+ fi
+ fi
+ done
+ done
+ fi
+ if [ "$found" = "0" ]; then
+ echo -n >"$DUMP"
+ fi
+ CARDID_DB=/var/tmp/alsaconf.cards
+ if [ ! -r $CARDID_DB ]; then
+ use_modinfo_db=1
+ fi
+ if [ $use_modinfo_db != 1 ]; then
+ if [ $CARDID_DB -ot /lib/modules/`uname -r`/modules.dep ]; then
+ use_modinfo_db=1
+ fi
+ fi
+ if [ $use_modinfo_db = 1 ]; then
+ xecho "Building card database.."
+ build_card_db $CARDID_DB
+ fi
+ if [ ! -r $CARDID_DB ]; then
+ xecho "No card database is found.."
+ exit 1
+ fi
+ ncards=`grep '^snd-.*\.o$' $CARDID_DB | wc -w`
+
+ msg=$(gettext "Searching sound cards")
+ awk '
+BEGIN {
+ format="%-40s %s\n";
+ ncards='"$ncards"';
+ idx=0;
+}
+/^snd-.*\.o$/{
+ sub(/.o$/, "");
+ driver=$0;
+ perc=(idx * 100) / (ncards + 1);
+ print int(perc);
+ idx++;
+}
+/^[<literal space><literal tab>]*PCI: /{
+ gsub(/0x/, "");
+ gsub(/=/, ":");
+ x = sprintf ("'$lspci' -n 2>/dev/null| grep '"' 04..: '"' | grep %s", $2);
+ if (system (x) == 0)
+ printf "%s %s\n", $2, driver >>"'"$FOUND"'"
+}
+/^[<literal space><literal tab>]*ISAPNP: /{
+ id2 = substr($0, index($0, "=")+1);
+ gsub(/=.*/, "");
+ x = sprintf ("grep '\''^Card [0-9] .%s:'\'' '"$DUMP"'", $2);
+ if (system (x) == 0)
+ printf "%s %s\n", $2, driver >>"'"$FOUND"'"
+ else if (index($2, "ffff") > 0) {
+ x = sprintf ("grep '\''^BIOS [0-9]* .%s.'\'' '"$DUMP"'", id2);
+ if (system (x) == 0)
+ printf "%s %s\n", id2, driver >>"'"$FOUND"'"
+ }
+}' < $CARDID_DB |\
+ $DIALOG --gauge "$msg" 6 40 0
+
+ #
+ # PowerMac
+ #
+ if grep -q MacRISC $PROCFS/cpuinfo; then
+ MODDIR=/lib/modules/`uname -r`
+ find $MODDIR -name 'snd-powermac*' -print | \
+ while read i; do
+ i=${i##*/}
+ i=${i%%.o}
+ i=${i%%.ko}
+ echo "PowerMac $i" >> $FOUND
+ done
+ fi
+
+ #
+ # Sparc
+ #
+ if grep -q Sparc $PROCFS/cpuinfo; then
+ test -r $PROCFS/openprom/name || /bin/mount -t openpromfs none $PROCFS/openprom >/dev/null 2>&1
+ # Check for an "audio" device
+ audio=
+ compat=
+ if test -r $PROCFS/openprom; then
+ audio=`find $PROCFS/openprom -follow -type d -name "audio*" -print`
+ fi
+ if test -n "$audio"; then
+ compat=`cat $audio/compatible`
+ compat=${compat#\'}
+ compat=${compat%\'}
+ compat=${compat#SUNW,}
+ fi
+ # Go through all cards we have
+ MODDIR=/lib/modules/`uname -r`
+ find $MODDIR -name 'snd-sun-*' -print | \
+ while read i; do
+ i=${i##*/}
+ i=${i%%.o}
+ i=${i%%.ko}
+ sdev=`echo ${i#snd-sun-} | tr "[a-z]" "[A-Z]"`
+
+ if test "$sdev" = "$compat"; then
+ echo "$sdev $i" >> $FOUND
+ elif test -r $PROCFS/openprom; then
+ find $PROCFS/openprom -follow -type d -name "SUNW,${sdev}*" \
+ -exec echo "$sdev $i" \; 2>/dev/null >> $FOUND
+ else
+ echo "$sdev $i" >> $FOUND
+ fi
+ done
+ fi
+}
+
+#
+# look for a descriptive device name from the given device id
+#
+find_device_name () {
+ if expr "$1" : '[0-9a-f][0-9a-f][0-9a-f][0-9a-f]:[0-9a-f][0-9a-f][0-9a-f][0-9a-f]' >/dev/null; then
+ $lspci -d $1 2>/dev/null| sed -e 's/^.*:..\.. [^:]*: //g'
+ return
+ elif expr "$1" : '[A-Z@][A-Z@][A-Z@][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' >/dev/null; then
+ cardname=`grep '^Card [0-9]\+ .'$1':' $DUMP | head -n 1 | sed -e 's/^Card [0-9]\+ '\''.*:\(.*\)'\'' .*$/\1/'`
+ echo $cardname
+ else
+ echo $1
+ fi
+}
+
+# get hwcfg file type from the given driver name
+get_hwcfg_type () {
+ while read dev driver; do
+ if [ "$driver" = "$1" ]; then
+ case "$dev" in
+ *:*)
+ # FIXME: need to look around /sys/bus/pci/* (or use vpid-* ?)
+ devid=`$lspci -d "$dev" | head -n 1 | sed -e 's/ .*$//'`
+ case "$devid" in
+ *:*:*.*) ;;
+ *) devid="0000:$devid" ;;
+ esac
+ echo bus-pci-$devid
+ ;;
+ *)
+ echo $driver
+ ;;
+ esac
+ break
+ fi
+ done
+}
+
+# clean up all hwcfg-* files containing ALSA modules
+# alsaconf sets up exclusively
+cleanup_hwcfg () {
+ for i in /etc/sysconfig/hardware/hwcfg-*; do
+ grep -q "MODULE='snd-" $i && rm -f $i
+ done
+}
+
+#
+# set up /etc/sysconfig/hardware/hwcfg-* stuff
+#
+setup_hwcfg () {
+ card=$1
+ cleanup_hwcfg
+ cfg=`echo "$devs_olist" | get_hwcfg_type $card`
+ echo "MODULE='$card'" > /etc/sysconfig/hardware/hwcfg-$cfg
+ echo "STARTMODE='auto'" >> /etc/sysconfig/hardware/hwcfg-$cfg
+}
+
+
+#
+# configure and try test sound
+#
+ac_config_card () {
+
+ CARD_DRIVER=snd-$1
+ CARD_OPTS="${*:2}"
+
+ if [ -n "$cfgout" ]; then
+ msg=$(xmsg "
+Configuring %s
+Do you want to modify %s (and %s if present)?" $CARD_DRIVER $cfgout $cfgfile)
+ $DIALOG --yesno "$msg" 10 50 || acex 0
+ else
+ msg=$(xmsg "
+Configuring %s
+Do you want to modify %s?" $CARD_DRIVER $cfgfile)
+ $DIALOG --yesno "$msg" 8 50 || acex 0
+ fi
+ clear
+
+ # Copy conf.modules and make changes.
+ ACB="# --- BEGIN: Generated by ALSACONF, do not edit. ---"
+ ACE="# --- END: Generated by ALSACONF, do not edit. ---"
+
+ # Detect 2.2.X kernel
+ KVER=`uname -r | tr ".-" " "`
+ KVER1=`echo $KVER | cut -d" " -f1`
+ KVER2=`echo $KVER | cut -d" " -f2`
+ if [ $KVER1 -ge 2 ] && [ $KVER2 -ge 2 ]; then
+ SOUND_CORE="soundcore"
+ else
+ SOUND_CORE="snd"
+ fi
+
+ if [ -r $cfgfile ] ; then
+ if [ "$distribution" = "redhat" -o "$distribution" = "fedora" ] ; then
+ remove_ac_block < $cfgfile | remove_sndconfig_block | uniq > $TMP
+ else
+ remove_ac_block < $cfgfile | remove_y2_block | uniq > $TMP
+ fi
+ fi
+
+ if [ -z "$have_alias" -a "$kernel" = "new" ]; then
+ if grep -q char-major-116 /lib/modules/`uname -r`/modules.alias; then
+ have_alias="yes"
+ fi
+ fi
+ if [ -z "$have_alias" ]; then
+echo "alias char-major-116 snd
+alias char-major-14 $SOUND_CORE
+alias sound-service-0-0 snd-mixer-oss
+alias sound-service-0-1 snd-seq-oss
+alias sound-service-0-3 snd-pcm-oss
+alias sound-service-0-8 snd-seq-oss
+alias sound-service-0-12 snd-pcm-oss" >> $addcfg
+ fi
+ if [ -n "$alsa_device_opts" ]; then
+ echo "options snd $alsa_device_opts" >> $addcfg
+ fi
+echo "alias snd-card-0 $CARD_DRIVER
+alias sound-slot-0 $CARD_DRIVER" >> $addcfg
+ if [ -n "$CARD_OPTS" ]; then
+ echo "options $CARD_DRIVER $CARD_OPTS" >> $addcfg
+ fi
+
+ if [ -n "$cfgout" ]; then
+ [ ! -r "$cfgfile" ] || cmp -s "$TMP" "$cfgfile" || cat "$TMP" > "$cfgfile"
+ cmp -s "$addcfg" "$cfgout" || cat "$addcfg" > "$cfgout"
+ test -n "$cfgoldout" && rm -f "$cfgoldout"
+ else
+ echo "$ACB
+# --- ALSACONF version $version ---" >> $TMP
+ cat "$addcfg" >> "$TMP"
+ echo "$ACE
+" >> $TMP
+ cmp -s "$TMP" "$cfgfile" || cat "$TMP" > "$cfgfile"
+ fi
+
+ /sbin/depmod -a 2>/dev/null
+
+ # remove yast2 entries (- only for suse distro)
+ if [ -f /var/lib/YaST/unique.inf ]; then
+ awk '
+BEGIN { in_sound=0; }
+/^\[sound\]$/ { print; in_sound=1; next; }
+/^\[.+\]$/ { print; in_sound=0; next; }
+{ if (in_sound == 0) { print; } }
+' < /var/lib/YaST/unique.inf > $TMP
+ cp -f $TMP /var/lib/YaST/unique.inf
+ fi
+
+ # set up /etc/sysconfig/hardware/*
+ if [ "$distribution" = "suse" ]; then
+ case "$suse_version" in
+ 10.[012]*|10)
+ setup_hwcfg $CARD_DRIVER
+ ;;
+ esac
+ fi
+
+ farewell
+ clear
+ case "$distribution" in
+ gentoo | debian)
+ xecho "Running update-modules..."
+ update-modules
+ ;;
+ esac
+ if [ -x $rcalsasound ] ; then
+ echo Loading driver...
+ $rcalsasound restart
+ fi
+ echo Setting default volumes...
+ if [ -x $bindir/set_default_volume ]; then
+ $bindir/set_default_volume -f
+ else
+ set_mixers
+ fi
+ if [ -f $TESTSOUND ]; then
+ msg=$(gettext "
+ The mixer is set up now for for playing.
+ Shall I try to play a sound sample now?
+
+ NOTE:
+If you have a big amplifier, lower your volumes or say no.
+ Otherwise check that your speaker volume is open,
+ and look if you can hear test sound.
+")
+ if $DIALOG --yesno "$msg" 13 65
+ then
+ clear
+ echo
+ aplay -N $TESTSOUND
+ fi
+ fi
+ mkdir -p -m 0755 @ASOUND_STATE_DIR@
+ if [ ! -r @ASOUND_STATE_DIR@/asound.state ]; then
+ xecho "Saving the mixer setup used for this in @ASOUND_STATE_DIR@/asound.state."
+ $sbindir/alsactl store
+ fi
+ clear
+ xecho "
+===============================================================================
+
+ Now ALSA is ready to use.
+ For adjustment of volumes, use your favorite mixer.
+
+ Have a lot of fun!
+
+"
+}
+
+# check playback
+# return 0 - OK, 1 - NG, 2 - not working (irq/dma problem)
+ac_try_load () {
+ test -n "$LOGFILE" && echo "$1 ${*:2}" >> "$LOGFILE"
+ /sbin/modprobe snd-$1 ${*:2} >/dev/null 2>&1
+ if $lsmod | grep -q -E '^(snd-|snd_)'$1' '; then
+ : ;
+ else
+ /sbin/modprobe -r snd-$1 >/dev/null 2>&1
+ return 1
+ fi
+
+ # mute mixers
+ amixer set Master 0% mute >/dev/null 2>&1
+ amixer set PCM 0% mute >/dev/null 2>&1
+
+ # output 0.5 sec
+ head -c 4000 < /dev/zero | aplay -N -r8000 -fS16_LE -traw -c1 > /dev/null 2>&1 &
+ # remember pid
+ pp=$!
+ # sleep for 2 seconds (to be sure -- 1 sec would be enough)
+ sleep 2
+ # kill the child process if still exists.
+ kill -9 $pp > /dev/null 2>&1
+ st=$?
+ ac_cardname=`head -n 1 $PROCFS/asound/cards | sed -e 's/^[0-9].* - \(.*\)$/\1/'`
+ /sbin/modprobe -r snd-$1 >/dev/null 2>&1
+ if [ $st = 0 ]; then
+ # irq problem?
+ test -n "$LOGFILE" && echo "no playback return" >> "$LOGFILE"
+ return 2
+ else
+ # seems ok!
+ test -n "$LOGFILE" && echo "playback OK" >> "$LOGFILE"
+ return 0
+ fi
+}
+
+# check capture
+# return 0 - OK, 1 - NG, 2 - not working (irq/dma problem)
+# ac_try_capture card duplex opts
+ac_try_capture () {
+ test -n "$LOGFILE" && echo "$1 ${*:2}" >> "$LOGFILE"
+ /sbin/modprobe snd-$1 ${*:3} >/dev/null 2>&1
+ if $lsmod | grep -q -E '^(snd-|snd_)'$1' '; then
+ : ;
+ else
+ /sbin/modprobe -r snd-$1 >/dev/null 2>&1
+ return 1
+ fi
+
+ # mute mixers
+ amixer set Master 0% mute >/dev/null 2>&1
+ amixer set PCM 0% mute >/dev/null 2>&1
+
+ play_pid=0
+ if [ $2 = yes ]; then
+ # try duplex - start dummy playing
+ aplay -N -r8000 -fS16_LE -traw -c1 < /dev/zero > /dev/null 2>&1 &
+ play_pid=$!
+ fi
+ # record 1sec
+ arecord -N -d1 > /dev/null 2>&1 &
+ # remember pid
+ pp=$!
+ # sleep for 2 seconds
+ sleep 2
+ # kill the child process if still exists.
+ kill -9 $pp > /dev/null 2>&1
+ st=$?
+ # kill playback process if any
+ test $play_pid != 0 && kill -9 $play_pid
+ /sbin/modprobe -r snd-$1 >/dev/null 2>&1
+ if [ $st = 0 ]; then
+ test -n "$LOGFILE" && echo "capture no return" >> "$LOGFILE"
+ return 2
+ else
+ test -n "$LOGFILE" && echo "capture OK" >> "$LOGFILE"
+ return 0
+ fi
+}
+
+get_dma_pair () {
+ case $1 in
+ 0)
+ echo 1 3 5;;
+ 1)
+ echo 0 3 5;;
+ 3)
+ echo 1 0 5;;
+ 5)
+ echo 3 1 0;;
+ esac
+}
+
+#
+# check playback on specified irqs
+#
+# ac_try_irq card opts irqs...
+# return 0 - OK, 1 - NG, 2 - not working (dma problem?)
+#
+ac_try_irq () {
+ card=$1
+ opts="$2 ${mpfx}irq=$3"
+ ac_try_load $card $opts >/dev/null 2>&1
+ result=$?
+ case $result in
+ 0)
+ ac_opts="$opts"
+ return 0
+ ;;
+ 2)
+ for irq in ${*:4}; do
+ opts="$2 ${mpfx}irq=$irq"
+ ac_try_load $card $opts >/dev/null 2>&1
+ if [ $? = 0 ]; then
+ ac_opts="$opts"
+ return 0
+ fi
+ done
+ return 2
+ ;;
+ esac
+ return 1
+}
+
+#
+# check playback/capture on dma1 & dma2 & specified irqs
+#
+# ac_try_dmas card opts irqs...
+# return 0 - OK, 1 - NG
+#
+ac_try_dmas () {
+ dma_list=`check_dma_avail 1 0 3 5`
+ for irq in ${*:3}; do
+ for dma1 in $dma_list; do
+ for dma2 in `get_dma_pair $dma1`; do
+ opts="$2 ${mpfx}dma1=$dma1 ${mpfx}dma2=$dma2 ${mpfx}irq=$irq"
+ ac_try_load $1 $opts >/dev/null 2>&1
+ result=$?
+ if [ $result = 1 ]; then
+ if [ $try_all_combination = 1 ]; then
+ continue
+ else
+ return 1
+ fi
+ elif [ $result = 0 ]; then
+ test -n "$LOGFILE" && echo "Now checking capture..." >> "$LOGFILE"
+ ac_opts="$opts"
+ ac_try_capture $1 yes $opts >/dev/null 2>&1 && return 0
+ for d in yes no; do
+ for dma2 in $dma_list; do
+ if [ $dma1 != $dma2 ]; then
+ opts="$2 ${mpfx}dma1=$dma1 ${mpfx}dma2=$dma2 ${mpfx}irq=$irq"
+ ac_opts="$opts"
+ ac_try_capture $1 $d $opts >/dev/null 2>&1 && return 0
+ fi
+ done
+ done
+ return 0
+ fi
+ done
+ done
+ done
+ return 1
+}
+
+# check if the option $2 exists in card $1: set value $3
+ac_check_option () {
+ if /sbin/modinfo -p snd-$1 | grep -q $2; then
+ echo "$2=$3"
+ fi
+}
+
+ac_try_card_sb8 () {
+ card=sb8
+ irq_list=`check_irq_avail 5 3 9 10 7`
+ for dma8 in `check_dma_avail 1 3`; do
+ opts="${mpfx}dma8=$dma8"
+ ac_try_irq $card "$opts" $irq_list && return 0
+ done
+ return 1
+}
+
+ac_try_card_sb16 () {
+ card=sb16
+ isapnp=`ac_check_option $card ${mpfx}isapnp 0`
+ opts="$isapnp"
+ irq_list=`check_irq_avail 5 9 10 7 3`
+ dma_list=`check_dma_avail 0 1 3`
+ dma16_list=`check_dma_avail 5 6 7`
+ # at first try auto-probing by driver itself
+ ac_try_load $card $opts >/dev/null 2>&1
+ result=$?
+ case $result in
+ 0)
+ ac_opts="$opts"
+ ac_try_capture $card yes $opts >/dev/null 2>&1 && return 0
+ for d in yes no; do
+ for dma8 in $dma_list; do
+ for irq in $irq_list; do
+ opts="${mpfx}dma8=$dma8 ${mpfx}irq=$irq $isapnp"
+ ac_try_capture $card $d $opts >/dev/null 2>&1 && return 0
+ done
+ done
+ done
+ return 0
+ ;;
+ 2)
+ for dma16 in $dma16_list; do
+ opts="${mpfx}dma16=$dma16 $isapnp"
+ if ac_try_irq $card "$opts" $irq_list ; then
+ ac_try_capture $card yes $ac_opts >/dev/null 2>&1 && return 0
+ ac_opts_saved="$ac_opts"
+ for d in yes no; do
+ for dma8 in $dma_list; do
+ ac_opts="$ac_opts_saved ${mpfx}dma8=$dma8"
+ ac_try_capture $card $d $ac_opts >/dev/null 2>&1 && return 0
+ done
+ done
+ # return anyway here..
+ return 0
+ fi
+ done
+ ;;
+ esac
+ return 1
+}
+
+ac_try_card_es1688 () {
+ card=es1688
+ opts=""
+ irq_list=`check_irq_avail 5 9 10 7`
+ for dma8 in `check_dma_avail 1 3 0`; do
+ opts="${mpfx}dma8=$dma8 ${mpfx}mpu_irq=-1"
+ ac_try_irq $card "$opts" $irq_list && return 0
+ done
+ return 1
+}
+
+ac_try_card_es18xx () {
+ card=es18xx
+ opts=`ac_check_option $card ${mpfx}isapnp 0`
+ ac_try_dmas $card "$opts" `check_irq_avail 5 9 10 7` && return 0
+ return 1
+}
+
+ac_try_card_cs4236 () {
+ card=cs4236
+ irq_list=`check_irq_avail 5 7 9 11 12 15`
+ isapnp=`ac_check_option $card ${mpfx}isapnp 0`
+ for cport in 0x538 0x210 0xf00; do
+ for port in 0x530 0x534; do
+ opts="${mpfx}port=$port ${mpfx}cport=$cport $isapnp"
+ ac_try_dmas $card "$opts" $irq_list && return 0
+ done
+ done
+ return 1
+}
+
+ac_try_card_cs4232 () {
+ card=cs4232
+ irq_list=`check_irq_avail 5 7 9 11 12 15`
+ isapnp=`ac_check_option $card ${mpfx}isapnp 0`
+ for cport in 0x538 0x210 0xf00; do
+ for port in 0x530 0x534; do
+ opts="${mpfx}port=$port ${mpfx}cport=$cport $isapnp"
+ ac_try_dmas $card "$opts" $irq_list && return 0
+ done
+ done
+ return 1
+}
+
+ac_try_card_cs4231 () {
+ card=cs4231
+ irq_list=`check_irq_avail 5 7 9 11 12 15`
+ for port in 0x530 0x534; do
+ opts="${mpfx}port=$port"
+ ac_try_dmas $card "$opts" $irq_list && return 0
+ done
+ return 1
+}
+
+ac_try_card_opl3sa2 () {
+ card=opl3sa2
+ irq_list=`check_irq_avail 5 9 3 1 11 12 15 0`
+ isapnp=`ac_check_option $card ${mpfx}isapnp 0`
+ for port in 0x370 0x538 0xf86 0x100; do
+ for wss_port in 0x530 0xe80 0xf40 0x604; do
+ opts="${mpfx}fm_port=-1 ${mpfx}midi_port=-1 ${mpfx}port=$port ${mpfx}wss_port=$wss_port $isapnp"
+ ac_try_dmas $card "$opts" $irq_list && return 0
+ done
+ done
+ return 1
+}
+
+ac_config_legacy () {
+ title=$(gettext "WARNING")
+ msg=$(gettext "
+ Probing legacy ISA cards might make
+ your system unstable.
+
+ Do you want to proceed?
+
+")
+ $DIALOG --title "$title" --yesno "$msg" 10 50 || acex 0
+
+ if [ x"$1" = x ]; then
+ probe_list="$LEGACY_CARDS"
+ else
+ probe_list=$*
+ fi
+ menu_args=()
+
+ for card in $probe_list; do
+ cardname=`/sbin/modinfo -d snd-$card | sed -e 's/^\"\(.*\)\"$/\1/g'`
+ if [ x"$cardname" != x ]; then
+ menu_args=("${menu_args[@]}" "$card" "$cardname" "on")
+ fi
+ done
+ if [ x$menu_args = x ]; then
+ msg=$(gettext "No legacy drivers are available
+ for your machine")
+ $DIALOG --msgbox "$msg" 5 50
+ return 1
+ fi
+ title=$(gettext "Driver Selection")
+ msg=$(gettext " Probing legacy ISA cards
+
+ Please select the drivers to probe:")
+ $DIALOG --title "$title" --checklist "$msg" \
+ 17 64 8 "${menu_args[@]}" 2> $FOUND || acex 0
+
+ if [ $try_all_combination != 1 ]; then
+ msg=$(gettext "
+ Shall I try all possible DMA and IRQ combinations?
+ With this option, some unconventional configuration
+ might be found, but it will take much longer time.")
+ if $DIALOG --yesno "$msg" 10 60
+ then
+ try_all_combination=1
+ fi
+ fi
+
+ xecho "Probing legacy cards.. This may take a few minutes.."
+ echo -n $(gettext "Probing: ")
+ cards=`cat $FOUND | tr -d \"`
+ for card in $cards; do
+ echo -n " $card"
+ ac_opts=""
+ if eval ac_try_card_$card ; then
+ xecho " : FOUND!!"
+ ac_config_card $card $ac_opts
+ return 0
+ fi
+ done
+ echo
+ title=$(gettext "Result")
+ msg=$(gettext "No legacy cards found")
+ $DIALOG --title "$title" --msgbox "$msg" 5 50
+ return 1
+}
+
+#
+# main part continued..
+#
+
+if test -n "$LOGFILE" ; then
+ touch "$LOGFILE"
+ echo -n "Starting alsaconf: " >> "$LOGFILE"
+ date >> "$LOGFILE"
+fi
+
+if [ x"$legacy_probe_card" != x ]; then
+ ac_opts=""
+ if eval ac_try_card_$legacy_probe_card >/dev/null 2>&1; then
+ echo "$ac_opts"
+ echo "$ac_cardname"
+ exit 0
+ else
+ echo "FAILED"
+ exit 1
+ fi
+fi
+
+intro
+
+if [ $do_legacy_only = 1 ]; then
+ ac_config_legacy
+ exit 0
+fi
+
+probe_cards
+
+devs_found=()
+devs_olist=""
+
+if [ -s "$FOUND" ]; then
+ while read dev card ; do
+ MODDIR=/lib/modules/`uname -r`
+ find $MODDIR -type f | grep -q -E $card'\.(o|ko)' || continue
+ cardname=`find_device_name $dev | cut -c 1-64`
+ if [ -z "$cardname" ]; then
+ cardname="$card"
+ fi
+ card=${card##snd-}
+ devs_found=("${devs_found[@]}" "$card" "$cardname")
+ devs_devs=("${devs_devs[@]}" "$card" "$dev")
+ done <"$FOUND"
+ devs_olist=`cat $FOUND`
+fi
+if [ x$devs_found != x ]; then
+ #
+ # check for TP600E
+ #
+ if [ ${devs_found[0]} = cs46xx ]; then
+ if $lspci -nv 2>/dev/null| grep -q "Subsystem: 1014:1010"; then
+ msg=$(gettext "
+ Looks like you having a Thinkpad 600E or 770 notebook.
+ On this notebook, CS4236 driver should be used
+ although CS46xx chip is detected.
+
+ Shall I try to snd-cs4236 driver and probe
+ the legacy ISA configuration?")
+ if $DIALOG --yesno "$msg" 13 60
+ then
+ try_all_combination=1
+ ac_config_legacy cs4236
+ exit 0
+ fi
+ elif $lspci -nv 2>/dev/null| grep -q "Subsystem: 8086:8080"; then
+ msg=$(gettext "
+ Looks like you having a Dell Dimension machine.
+ On this machine, CS4232 driver should be used
+ although CS46xx chip is detected.
+
+ Shall I try to snd-cs4232 driver and probe
+ the legacy ISA configuration?")
+ if $DIALOG --yesno "$msg" 13 60
+ then
+ try_all_combination=1
+ ac_config_legacy cs4232
+ exit 0
+ fi
+ fi
+ fi
+
+ devs_found=("${devs_found[@]}" "legacy" "Probe legacy ISA (non-PnP) chips")
+ title=$(gettext "Soundcard Selection")
+ msg=$(gettext "
+ Following card(s) are found on your system.
+ Choose a soundcard to configure:
+")
+ $DIALOG --title "$title" --menu "$msg" 17 76 8 "${devs_found[@]}" --output-fd 3 3> $FOUND || acex 0
+ card=`head -n 1 $FOUND`
+ if [ "$card" = "legacy" ]; then
+ ac_config_legacy
+ else
+ ac_config_card "$card"
+ fi
+ exit 0
+else
+ msg=$(gettext "
+ No supported PnP or PCI card found.
+
+ Would you like to probe legacy ISA sound cards/chips?
+
+")
+ if $DIALOG --yesno "$msg" 9 60 ; then
+ ac_config_legacy
+ exit 0
+ fi
+fi
+
+rm -f "$FOUND" "$DUMP"
+exit 0
diff --git a/alsaconf/po/Makefile.in b/alsaconf/po/Makefile.in
new file mode 100644
index 0000000..f1fa9aa
--- /dev/null
+++ b/alsaconf/po/Makefile.in
@@ -0,0 +1,91 @@
+POFILES = ja.po ru.po
+
+DOMAIN = alsaconf
+GETTEXT_SRC = ../alsaconf.in
+
+XGETTEXT_OPTIONS = -kxmsg -kxecho
+
+top_builddir = ../..
+
+srcdir = @srcdir@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+prefix = @prefix@
+localedir = $(datadir)/locale
+
+USE_NLS = @USE_NLS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+# mkdir_p = @mkdir_p@
+mkdir_p = mkdir -p --
+XGETTEXT = @XGETTEXT@
+MSGFMT = @MSGFMT@
+GMSGFMT = @GMSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+
+DISTFILES = $(POFILES) Makefile.in
+CATALOGS = $(POFILES:.po=.gmo)
+
+all: all-@USE_NLS@
+
+all-yes: $(CATALOGS)
+all-no:
+
+.SUFFIXES: .po .gmo .mo
+
+%.mo : $(srcdir)/%.po
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+%.gmo : $(srcdir)/%.po
+ @lang=`echo $(srcdir)/$* | sed -e 's,.*/,,'`; \
+ rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $(srcdir)/$${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+$(DOMAIN).pot: $(GETTEXT_SRC)
+ $(XGETTEXT) -o$@ --default-domain=$(DOMAIN) \
+ --add-comments=TRANSLATORS: --language=Shell \
+ $(XGETTEXT_OPTIONS) $<
+
+check check_recursive:
+
+clean:
+ rm -f $(CATALOGS) $(POFILES:.po=.mo) $(DOMAIN).pot
+
+update-po: $(DOMAIN).pot
+ @for po in $(POFILES); do \
+ $(MSGMERGE_UPDATE) $(srcdir)/$$po $(DOMAIN).pot; \
+ done
+
+install-data-no:
+install-data-yes: all
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ done
+
+install-data: install-data-@USE_NLS@
+install: install-data
+
+uninstall-data-no:
+uninstall-data-yes:
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo; \
+ done
+
+uninstall-data: uninstall-data-@USE_NLS@
+uninstall: uninstall-data
+
+dist distdir: $(DISTFILES)
+ @for file in $(DISTFILES); do \
+ cp -p $$file $(distdir); \
+ done
+
+distclean: clean
+ rm -f Makefile *~
diff --git a/alsaconf/po/ja.po b/alsaconf/po/ja.po
new file mode 100644
index 0000000..170f708
--- /dev/null
+++ b/alsaconf/po/ja.po
@@ -0,0 +1,362 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: alsaconf\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-12-02 12:37+0100\n"
+"PO-Revision-Date: 2005-12-02 12:39+0100\n"
+"Last-Translator: Takashi Iwai <tiwai@suse.de>\n"
+"Language-Team: Japanese <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../alsaconf.in:36
+msgid "-s"
+msgstr ""
+
+#: ../alsaconf.in:80
+msgid "ALSA configurator"
+msgstr "ALSA 設定ツール"
+
+#: ../alsaconf.in:82
+msgid ""
+"usage: alsaconf [options]\n"
+" -l|--legacy check only legacy non-isapnp cards\n"
+" -m|--modinfo read module descriptions instead of reading card db\n"
+" -s|--sound wav-file\n"
+" use the specified wav file as a test sound\n"
+" -u|--uid uid set the uid for the ALSA devices (default = 0) [obsoleted]\n"
+" -g|--gid gid set the gid for the ALSA devices (default = 0) [obsoleted]\n"
+" -d|--devmode mode\n"
+" set the permission for ALSA devices (default = 0666) "
+"[obs.]\n"
+" -r|--strict set strict device mode (equiv. with -g 17 -d 0660) "
+"[obsoleted]\n"
+" -L|--log file logging on the specified file (for debugging purpose only)\n"
+" -p|--probe card-name\n"
+" probe a legacy non-isapnp card and print module options\n"
+" -P|--listprobe list the supported legacy card modules\n"
+" -c|--config file\n"
+" specify the module config file\n"
+" -R|--resources list available DMA and IRQ resources with debug for legacy\n"
+" -h|--help what you're reading"
+msgstr ""
+"使用法: alsaconf [オプション]\n"
+" -l|--legacy 非 ISAPnP カードのみチェックする\n"
+" -m|--modinfo カード DB を読む代わりにモジュール記述を読み込み\n"
+" -s|--sound WAVファイル\n"
+" 指定の WAV ファイルをテスト音として用いる\n"
+" -u|--uid uid ALSA デバイスの uid (デフォルト = 0) [旧オプション・無視されます]\n"
+" -g|--gid gid ALSA デバイスの gid (デフォルト = 0) [旧]\\n\"\n"
+" -d|--devmode モード\n"
+" ALSA デバイスのパーミッション(デフォルト = 0666) [旧]\n"
+" -r|--strict 厳格なモード (-g 17 -d 0660 と同等) [旧]\n"
+" -L|--log file 指定のファイルにログを記録する (デバッグ用途)\n"
+" -p|--probe カード名\n"
+" 指定の 非IsaPnP カードを検索しモジュールオプションを表示する\n"
+" -P|--listprobe サポートされている旧式の(非isapnp)カードのモジュール一覧表示\n"
+" -c|--config ファイル\n"
+" 指定のモジュール設定ファイルを用いる\n"
+" -R|--resources レガシーデバイスのデバッグ用: 可能な DMA と IRQ を表示する\n"
+" -h|--help 今見ています"
+
+#: ../alsaconf.in:252
+msgid "You must be root to use this script."
+msgstr "ルートのみ実行可能です"
+
+#: ../alsaconf.in:294
+msgid "ERROR: The config file doesn't exist: "
+msgstr "エラー: 設定ファイルが存在しません: "
+
+#: ../alsaconf.in:336
+msgid "Error, dialog or whiptail not found."
+msgstr "エラー: dialog または whiptail が見つかりません"
+
+#: ../alsaconf.in:342
+msgid "Error, awk not found. Can't continue."
+msgstr "エラー: awk が見つかりません"
+
+#: ../alsaconf.in:439
+msgid ""
+"\n"
+" ALSA CONFIGURATOR\n"
+" version %s\n"
+"\n"
+" This script is a configurator for\n"
+" Advanced Linux Sound Architecture (ALSA) driver.\n"
+"\n"
+"\n"
+" If ALSA is already running, you should close all sound\n"
+" apps now and stop the sound driver.\n"
+" alsaconf will try to do this, but it's not 100%% sure."
+msgstr ""
+"\n"
+" ALSA 設定ツール\n"
+" バージョン %s\n"
+"\n"
+" このスクリプトは、Advanced Linux Sound Architecture\n"
+" (ALSA) ドライバの設定を行うツールです。\n"
+"\n"
+"\n"
+" もし既に ALSA が起動している場合は、実行前に\n"
+" 全てのサウンドアプリケーションを閉じて、サウンド\n"
+" ドライバを停止してください。\n"
+" alsaconf の動作は 100%% 保証できません。"
+
+#: ../alsaconf.in:455
+msgid ""
+"\n"
+"\n"
+" OK, sound driver is configured.\n"
+"\n"
+" ALSA CONFIGURATOR\n"
+"\n"
+" will prepare the card for playing now.\n"
+"\n"
+" Now I'll run alsasound init script, then I'll use\n"
+" amixer to raise the default volumes.\n"
+" You can change the volume later via a mixer\n"
+" program such as alsamixer or gamix.\n"
+" \n"
+" "
+msgstr ""
+"\n"
+"\n"
+" サウンドドライバが設定されました。\n"
+"\n"
+" これからカードの再生の準備を行います。\n"
+"\n"
+"\n"
+" alsasound スクリプトを実行し、その後 amixer で\n"
+" デフォルトの音量に設定します。\n"
+" 後で、alsamixer や gamix などのミキサープログラム\n"
+" を用いて、音量を変更することが可能です。\n"
+" "
+
+#: ../alsaconf.in:518 ../alsaconf.in:523 ../alsaconf.in:528 ../alsaconf.in:533
+msgid "Can't create temp file, exiting..."
+msgstr "一時ファイルを作成できませんでした。中止します..."
+
+#: ../alsaconf.in:643
+msgid "Building card database.."
+msgstr "カードデータベースを作成中..."
+
+#: ../alsaconf.in:647
+msgid "No card database is found.."
+msgstr "カードが見つかりませんでした..."
+
+#: ../alsaconf.in:652
+msgid "Searching sound cards"
+msgstr "サウンドカードを検索中"
+
+#: ../alsaconf.in:806
+msgid ""
+"\n"
+"Configuring %s\n"
+"Do you want to modify %s (and %s if present)?"
+msgstr ""
+"\n"
+"%s を設定します\n"
+"%s (および %s) を変更しますか？"
+
+#: ../alsaconf.in:811
+msgid ""
+"\n"
+"Configuring %s\n"
+"Do you want to modify %s?"
+msgstr ""
+"\n"
+"%s を設定します\n"
+"%s を変更しますか？"
+
+#: ../alsaconf.in:900
+msgid "Running modules-update..."
+msgstr "modules-update を実行中..."
+
+#: ../alsaconf.in:903
+msgid "Running update-modules..."
+msgstr "update-modules を実行中..."
+
+#: ../alsaconf.in:915
+msgid ""
+"\n"
+" The mixer is set up now for for playing.\n"
+" Shall I try to play a sound sample now?\n"
+"\n"
+" NOTE:\n"
+"If you have a big amplifier, lower your volumes or say no.\n"
+" Otherwise check that your speaker volume is open,\n"
+" and look if you can hear test sound.\n"
+msgstr ""
+"\n"
+" 音量を再生用に準備し終えました。\n"
+" サンプルのサウンドを再生しますか？\n"
+"\n"
+" 注意:\n"
+" 大容量アンプの場合は、音量を下げておくか、ここで「いいえ」\n"
+" を選択してください。スピーカーの音量をチェックして、\n"
+" テスト音が聞こえるかどうか確認してください。\n"
+
+#: ../alsaconf.in:932
+msgid "Saving the mixer setup used for this in /etc/asound.state."
+msgstr "ミキサーの設定を /etc/asound.state に保存します"
+
+#: ../alsaconf.in:936
+msgid ""
+"\n"
+"===============================================================================\n"
+"\n"
+" Now ALSA is ready to use.\n"
+" For adjustment of volumes, use your favorite mixer.\n"
+"\n"
+" Have a lot of fun!\n"
+"\n"
+msgstr ""
+"\n"
+"===============================================================================\n"
+"\n"
+" これで ALSA が使用可能になりました。\n"
+" 音量の調整には、ミキサープログラムをご使用下さい。\n"
+"\n"
+
+#: ../alsaconf.in:1244
+msgid "WARNING"
+msgstr "注意"
+
+#: ../alsaconf.in:1245
+msgid ""
+"\n"
+" Probing legacy ISA cards might make\n"
+" your system unstable.\n"
+"\n"
+" Do you want to proceed?\n"
+"\n"
+msgstr ""
+"\n"
+" 旧式の ISA カードの検索を行うと\n"
+" システムが不安定になる場合があります。\n"
+"\n"
+" このまま続けますか？\n"
+"\n"
+
+#: ../alsaconf.in:1268
+msgid ""
+"No legacy drivers are available\n"
+" for your machine"
+msgstr ""
+"旧式の ISA カードは\n"
+"検出されませんでした"
+
+#: ../alsaconf.in:1273
+msgid "Driver Selection"
+msgstr "ドライバの選択"
+
+#: ../alsaconf.in:1274
+msgid ""
+" Probing legacy ISA cards\n"
+"\n"
+" Please select the drivers to probe:"
+msgstr ""
+" 旧式の ISA カードの検出\n"
+"\n"
+" 検出するドライバを選択してください:"
+
+#: ../alsaconf.in:1281
+msgid ""
+"\n"
+" Shall I try all possible DMA and IRQ combinations?\n"
+" With this option, some unconventional configuration\n"
+" might be found, but it will take much longer time."
+msgstr ""
+"\n"
+" 可能な DMA と IRQ の全ての組合せを試みますか？\n"
+" このオプションでは、まれな設定も検出されることが\n"
+" 可能ですが、より長い時間がかかります。"
+
+#: ../alsaconf.in:1291
+msgid "Probing legacy cards.. This may take a few minutes.."
+msgstr "旧式カードの検出中... 長時間がかかることがあります..."
+
+#: ../alsaconf.in:1292
+msgid "Probing: "
+msgstr "検出中: "
+
+#: ../alsaconf.in:1298
+msgid " : FOUND!!"
+msgstr " : 発見!!"
+
+#: ../alsaconf.in:1304
+msgid "Result"
+msgstr "結果"
+
+#: ../alsaconf.in:1305
+msgid "No legacy cards found"
+msgstr "旧式カードが見つかりませんでした"
+
+#: ../alsaconf.in:1364
+msgid ""
+"\n"
+" Looks like you having a Thinkpad 600E or 770 notebook.\n"
+" On this notebook, CS4236 driver should be used\n"
+" although CS46xx chip is detected.\n"
+"\n"
+" Shall I try to snd-cs4236 driver and probe\n"
+" the legacy ISA configuration?"
+msgstr ""
+"\n"
+" Thinkpad 600E または 770 をご使用のようです。\n"
+" このマシンでは、CS46xx チップが検出されますが\n"
+" CS4236 ドライバを用いる必要があります。\n"
+"\n"
+" snd-cs4236 ドライバを試用して、旧式の ISA 設定\n"
+" の検出を行いますか？"
+
+#: ../alsaconf.in:1378
+msgid ""
+"\n"
+" Looks like you having a Dell Dimension machine.\n"
+" On this machine, CS4232 driver should be used\n"
+" although CS46xx chip is detected.\n"
+"\n"
+" Shall I try to snd-cs4232 driver and probe\n"
+" the legacy ISA configuration?"
+msgstr ""
+"\n"
+" Dell Dimension マシンをご使用のようです。\n"
+" このマシンでは、CS46xx チップが検出されますが\n"
+" CS4232 ドライバを用いる必要があります。\n"
+"\n"
+" snd-cs4232 ドライバを試用して、旧式の ISA 設定\n"
+" の検出を行いますか？"
+
+#: ../alsaconf.in:1395
+msgid "Soundcard Selection"
+msgstr "サウンドカードの選択"
+
+#: ../alsaconf.in:1396
+msgid ""
+"\n"
+" Following card(s) are found on your system.\n"
+" Choose a soundcard to configure:\n"
+msgstr ""
+"\n"
+" 以下のカードがシステムから検出されました。\n"
+" 設定するカードを選択してください:\n"
+
+#: ../alsaconf.in:1409
+msgid ""
+"\n"
+" No supported PnP or PCI card found.\n"
+"\n"
+" Would you like to probe legacy ISA sound cards/chips?\n"
+"\n"
+msgstr ""
+"\n"
+" PnP または PCI カードが検出されませんでした。\n"
+"\n"
+" 旧式の ISA サウンドカードの検出を行いますか？\n"
diff --git a/alsaconf/po/ru.po b/alsaconf/po/ru.po
new file mode 100644
index 0000000..af4fa0d
--- /dev/null
+++ b/alsaconf/po/ru.po
@@ -0,0 +1,373 @@
+# Russian translations for alsa-utils package
+# Английские переводы для пакета alsa-utils.
+# Copyright (C) 2005 THE alsa-utils'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the alsa-utils package.
+# <dushistov@mail.ru>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: alsa-utils 1.0.9rc4a\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-12-02 12:37+0100\n"
+"PO-Revision-Date: 2005-12-02 12:39+0100\n"
+"Last-Translator: <dushistov@mail.ru>\n"
+"Language-Team: Russian <ru@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: ../alsaconf.in:36
+msgid "-s"
+msgstr ""
+
+#: ../alsaconf.in:80
+msgid "ALSA configurator"
+msgstr "Найстройщик ALSA"
+
+#: ../alsaconf.in:82
+#, fuzzy
+msgid ""
+"usage: alsaconf [options]\n"
+" -l|--legacy check only legacy non-isapnp cards\n"
+" -m|--modinfo read module descriptions instead of reading card db\n"
+" -s|--sound wav-file\n"
+" use the specified wav file as a test sound\n"
+" -u|--uid uid set the uid for the ALSA devices (default = 0) [obsoleted]\n"
+" -g|--gid gid set the gid for the ALSA devices (default = 0) [obsoleted]\n"
+" -d|--devmode mode\n"
+" set the permission for ALSA devices (default = 0666) "
+"[obs.]\n"
+" -r|--strict set strict device mode (equiv. with -g 17 -d 0660) "
+"[obsoleted]\n"
+" -L|--log file logging on the specified file (for debugging purpose only)\n"
+" -p|--probe card-name\n"
+" probe a legacy non-isapnp card and print module options\n"
+" -P|--listprobe list the supported legacy card modules\n"
+" -c|--config file\n"
+" specify the module config file\n"
+" -R|--resources list available DMA and IRQ resources with debug for legacy\n"
+" -h|--help what you're reading"
+msgstr ""
+"использование: alsaconf [опции]\n"
+" -l|--legacy проверять только не ISAPnP карты\n"
+" -m|--modinfo читать описание модулей вместо чтения бызы данных карт\n"
+" -s|--sound WAV файл\n"
+" использовать указанный WAV файл в качестве тестового\n"
+" -u|--uid uid устанавливает uid для ALSA(по умолчанию = 0) [устарело]\n"
+" -g|--gid gid устанавливает gid для ALSA(по умолчанию = 0) [устарело]\n"
+" -d|--devmode режим\n"
+" устанавливает права доступа для ALSA (по умолчанию = 0666) "
+"[уст.]\n"
+" -r|--strict устанавливает строгие права для ALSA (экв. -g 17 -d 0660) "
+"[уст.]\n"
+" -L|--log файл записывать события в определенный файл (в целях отладки)\n"
+" -p|--probe имя звуковой карты\n"
+" проверить обычную не IsaPnP карту и вывести опции модуля\n"
+" -P|--listprobe вывести список поддерживаемых не IsaPnP карт\n"
+" -c|--config файл\n"
+" указывает файл с настройками модуля\n"
+" -h|--help вывести это сообщение"
+
+#: ../alsaconf.in:252
+msgid "You must be root to use this script."
+msgstr "Вы должны быть суперпользователем, чтобы использовать этот скрипт."
+
+#: ../alsaconf.in:294
+msgid "ERROR: The config file doesn't exist: "
+msgstr "ОШИБКА: Файл с настройками не существует: "
+
+#: ../alsaconf.in:336
+msgid "Error, dialog or whiptail not found."
+msgstr "Ошибка, dialog или whiptail не найдены."
+
+#: ../alsaconf.in:342
+msgid "Error, awk not found. Can't continue."
+msgstr "Ошибка, awk не найден. Не могу продолжить работу."
+
+#: ../alsaconf.in:439
+msgid ""
+"\n"
+" ALSA CONFIGURATOR\n"
+" version %s\n"
+"\n"
+" This script is a configurator for\n"
+" Advanced Linux Sound Architecture (ALSA) driver.\n"
+"\n"
+"\n"
+" If ALSA is already running, you should close all sound\n"
+" apps now and stop the sound driver.\n"
+" alsaconf will try to do this, but it's not 100%% sure."
+msgstr ""
+"\n"
+" Настройщик ALSA\n"
+" версия %s\n"
+"\n"
+" Этот скрипт настраивает Advanced Linux Sound Architecture\n"
+"\n"
+"\n"
+" Если какие-нибудь приложения входящие в пакет ALSA уже запущены,\n"
+" вы должны закрыть все приложения работающие со звуком\n"
+" и остановаить звуковой драйвер.\n"
+" alsaconf попытается это сделать, но результат не гарантируется на все 100%"
+"%."
+
+#: ../alsaconf.in:455
+msgid ""
+"\n"
+"\n"
+" OK, sound driver is configured.\n"
+"\n"
+" ALSA CONFIGURATOR\n"
+"\n"
+" will prepare the card for playing now.\n"
+"\n"
+" Now I'll run alsasound init script, then I'll use\n"
+" amixer to raise the default volumes.\n"
+" You can change the volume later via a mixer\n"
+" program such as alsamixer or gamix.\n"
+" \n"
+" "
+msgstr ""
+"\n"
+"\n"
+" Хорошо, драйвер звуковой карты настроен.\n"
+"\n"
+" Сейчас Настройщик ALSA\n"
+"\n"
+" подготовит звуковую карту для проигрования.\n"
+"\n"
+" Сейчас я запущу скрипт, инициализирующий alsasound, потом использую "
+"amixer\n"
+" для увеличения уровня громкости по умолчания.\n"
+" Вы можете изменить уровень громкости по умолчания позже\n"
+" с помощью таких программ как alsamixer или gamix.\n"
+" "
+
+#: ../alsaconf.in:518 ../alsaconf.in:523 ../alsaconf.in:528 ../alsaconf.in:533
+msgid "Can't create temp file, exiting..."
+msgstr "Не могу создать временный файл, прекращаю работу..."
+
+#: ../alsaconf.in:643
+msgid "Building card database.."
+msgstr "Создаю базу данных с информацией о звуковых карточках.."
+
+#: ../alsaconf.in:647
+msgid "No card database is found.."
+msgstr "База данных, содержащая информацию о звуковых карточках, не найдена.."
+
+#: ../alsaconf.in:652
+msgid "Searching sound cards"
+msgstr "Ищем звуковые карточки"
+
+#: ../alsaconf.in:806
+msgid ""
+"\n"
+"Configuring %s\n"
+"Do you want to modify %s (and %s if present)?"
+msgstr ""
+"\n"
+"Настраиваем %s\n"
+"Вы хотите изменить %s (и %s, если существует)?"
+
+#: ../alsaconf.in:811
+msgid ""
+"\n"
+"Configuring %s\n"
+"Do you want to modify %s?"
+msgstr ""
+"\n"
+"Настраиваем %s\n"
+"Вы хотите изменить %s?"
+
+#: ../alsaconf.in:900
+msgid "Running modules-update..."
+msgstr "Запускаем modules-update..."
+
+#: ../alsaconf.in:903
+msgid "Running update-modules..."
+msgstr "Запускаем update-modules..."
+
+#: ../alsaconf.in:915
+msgid ""
+"\n"
+" The mixer is set up now for for playing.\n"
+" Shall I try to play a sound sample now?\n"
+"\n"
+" NOTE:\n"
+"If you have a big amplifier, lower your volumes or say no.\n"
+" Otherwise check that your speaker volume is open,\n"
+" and look if you can hear test sound.\n"
+msgstr ""
+"\n"
+" Микшер настроен для проигровования.\n"
+" Проиграть тестовый пример?\n"
+"\n"
+" Примечание:\n"
+" Если у вас большой усилитель, уменьшите уровень громкости или скажите "
+"нет.\n"
+" В противном случае проверьте, что ваши колонки включены,\n"
+" и удостоверьтесь что вы слышите тестовый пример.\n"
+
+#: ../alsaconf.in:932
+msgid "Saving the mixer setup used for this in /etc/asound.state."
+msgstr "Сохраняем настройки микшера в /etc/asound.state."
+
+#: ../alsaconf.in:936
+msgid ""
+"\n"
+"===============================================================================\n"
+"\n"
+" Now ALSA is ready to use.\n"
+" For adjustment of volumes, use your favorite mixer.\n"
+"\n"
+" Have a lot of fun!\n"
+"\n"
+msgstr ""
+"\n"
+"===============================================================================\n"
+"\n"
+" Теперь ALSA готова к использованию.\n"
+" Для регулировки уровня громкости, используйте ваш любимый микшер.\n"
+"\n"
+" Оторвись по полной!\n"
+"\n"
+
+#: ../alsaconf.in:1244
+msgid "WARNING"
+msgstr "ПРЕДУПРЕЖДЕНИЕ"
+
+#: ../alsaconf.in:1245
+msgid ""
+"\n"
+" Probing legacy ISA cards might make\n"
+" your system unstable.\n"
+"\n"
+" Do you want to proceed?\n"
+"\n"
+msgstr ""
+"\n"
+" Поиск ISA звуковых карточек может сделать\n"
+" вашу систему нестабильной.\n"
+"\n"
+" Вы уверены?\n"
+"\n"
+
+#: ../alsaconf.in:1268
+msgid ""
+"No legacy drivers are available\n"
+" for your machine"
+msgstr ""
+"Нету подходяшего драйвера для\n"
+" вашей машины"
+
+#: ../alsaconf.in:1273
+msgid "Driver Selection"
+msgstr "Выбор Драйвера"
+
+#: ../alsaconf.in:1274
+msgid ""
+" Probing legacy ISA cards\n"
+"\n"
+" Please select the drivers to probe:"
+msgstr ""
+" Поиск ISA звуковых карт\n"
+"\n"
+" Пожалуйста, выберите драйверы для проверки:"
+
+#: ../alsaconf.in:1281
+msgid ""
+"\n"
+" Shall I try all possible DMA and IRQ combinations?\n"
+" With this option, some unconventional configuration\n"
+" might be found, but it will take much longer time."
+msgstr ""
+"\n"
+" Попробовать все доступные DMA и IRQ комбинации?\n"
+" С этой опцией, могут быть найдены некоторые нестандартные\n"
+" конфигураии, но это займет намного больше времени."
+
+#: ../alsaconf.in:1291
+msgid "Probing legacy cards.. This may take a few minutes.."
+msgstr "Поиск звуковых карточек.. Это может занять несколько минут.."
+
+#: ../alsaconf.in:1292
+msgid "Probing: "
+msgstr "Проверка: "
+
+#: ../alsaconf.in:1298
+msgid " : FOUND!!"
+msgstr " : НАШЕЛ!!"
+
+#: ../alsaconf.in:1304
+msgid "Result"
+msgstr "Результат"
+
+#: ../alsaconf.in:1305
+msgid "No legacy cards found"
+msgstr "Звуковых карточек не найдено"
+
+#: ../alsaconf.in:1364
+msgid ""
+"\n"
+" Looks like you having a Thinkpad 600E or 770 notebook.\n"
+" On this notebook, CS4236 driver should be used\n"
+" although CS46xx chip is detected.\n"
+"\n"
+" Shall I try to snd-cs4236 driver and probe\n"
+" the legacy ISA configuration?"
+msgstr ""
+"\n"
+" Кажется, мы имеем дело с ноутбуком Thinkpad 600E или 770.\n"
+" На этом ноутбуке, драйвер CS4236 должен использоваться\n"
+" хотя определяется CS46xx\n"
+"\n"
+" Использовать snd-cs4236 и проверить правильность ISA\n"
+" конфигурации?"
+
+#: ../alsaconf.in:1378
+msgid ""
+"\n"
+" Looks like you having a Dell Dimension machine.\n"
+" On this machine, CS4232 driver should be used\n"
+" although CS46xx chip is detected.\n"
+"\n"
+" Shall I try to snd-cs4232 driver and probe\n"
+" the legacy ISA configuration?"
+msgstr ""
+"\n"
+" Похоже что вы имеем дело с машиной Dell Dimension.\n"
+" На этой машине CS4232 драйвер должен исползьовать, チップが検出されますが\n"
+" хотя чип звуковой карты определяется как CS46xx.\n"
+"\n"
+" Использовать snd-cs4232 и проверить ISA валидность\n"
+" этой конфигурации?"
+
+#: ../alsaconf.in:1395
+msgid "Soundcard Selection"
+msgstr "Выбор Звуковой карты"
+
+#: ../alsaconf.in:1396
+msgid ""
+"\n"
+" Following card(s) are found on your system.\n"
+" Choose a soundcard to configure:\n"
+msgstr ""
+"\n"
+" Следущее звуковая(ые) карта(ы) найдены в вашей системе.\n"
+" Выберите звуковую карту для настройки:\n"
+
+#: ../alsaconf.in:1409
+msgid ""
+"\n"
+" No supported PnP or PCI card found.\n"
+"\n"
+" Would you like to probe legacy ISA sound cards/chips?\n"
+"\n"
+msgstr ""
+"\n"
+" Найдена не поддерживаемая PnP или PCI карта.\n"
+"\n"
+" Желаете проверить ISA звуковые карты/чипы?\n"
+"\n"
diff --git a/alsactl/90-alsa-restore.rules.in b/alsactl/90-alsa-restore.rules.in
new file mode 100644
index 0000000..88e12e0
--- /dev/null
+++ b/alsactl/90-alsa-restore.rules.in
@@ -0,0 +1,8 @@
+ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS!="card*", GOTO="alsa_restore_go"
+GOTO="alsa_restore_end"
+
+LABEL="alsa_restore_go"
+TEST!="@daemonswitch@", RUN+="@sbindir@/alsactl restore $attr{number}"
+TEST=="@daemonswitch@", RUN+="@sbindir@/alsactl nrestore $attr{number}"
+
+LABEL="alsa_restore_end"
diff --git a/alsactl/Android.mk b/alsactl/Android.mk
new file mode 100644
index 0000000..7a16ccd
--- /dev/null
+++ b/alsactl/Android.mk
@@ -0,0 +1,17 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := alsactl
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := alsactl.c \
+ daemon.c \
+ init_parse.c \
+ lock.c \
+ state.c \
+ utils.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/alsactl/Makefile.am b/alsactl/Makefile.am
new file mode 100644
index 0000000..bac84eb
--- /dev/null
+++ b/alsactl/Makefile.am
@@ -0,0 +1,68 @@
+SUBDIRS = init
+
+sbin_PROGRAMS=alsactl
+man_MANS=alsactl.1
+if USE_XMLTO
+man_MANS += alsactl_init.7
+endif
+EXTRA_DIST=alsactl.1 alsactl_init.xml
+
+alsactl_SOURCES=alsactl.c state.c lock.c utils.c init_parse.c daemon.c
+alsactl_CFLAGS=$(AM_CFLAGS) -D__USE_GNU -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" -DSYS_PIDFILE=\"$(ALSACTL_PIDFILE_DIR)/alsactl.pid\"
+noinst_HEADERS=alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
+
+udevrules_DATA = \
+ 90-alsa-restore.rules
+
+if HAVE_SYSTEMD
+
+systemdsystemunit_DATA = \
+ alsa-state.service \
+ alsa-restore.service \
+ alsa-store.service
+
+install-data-hook:
+ $(MKDIR_P) -m 0755 \
+ $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \
+ $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants
+ ( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \
+ rm -f alsa-state.service alsa-restore.service && \
+ $(LN_S) ../alsa-state.service alsa-state.service && \
+ $(LN_S) ../alsa-restore.service alsa-restore.service)
+ ( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \
+ rm -f alsa-store.service && \
+ $(LN_S) ../alsa-store.service alsa-store.service )
+
+endif
+
+edit = \
+ $(SED) -r -e 's,@sbindir\@,$(sbindir),g' \
+ -e 's,@daemonswitch\@,$(ALSACTL_DAEMONSWITCH),g' \
+ < $< > $@ || rm $@
+
+alsa-state.service: alsa-state.service.in
+ $(edit)
+
+alsa-restore.service: alsa-restore.service.in
+ $(edit)
+
+alsa-store.service: alsa-store.service.in
+ $(edit)
+
+90-alsa-restore.rules: 90-alsa-restore.rules.in
+ $(edit)
+
+EXTRA_DIST += \
+ alsa-state.service.in \
+ alsa-restore.service.in \
+ alsa-store.service.in \
+ 90-alsa-restore.rules.in
+
+CLEANFILES = \
+ alsa-state.service \
+ alsa-restore.service \
+ alsa-store.service \
+ 90-alsa-restore.rules
+
+%.7: %.xml
+ xmlto man $?
diff --git a/alsactl/Makefile.in b/alsactl/Makefile.in
new file mode 100644
index 0000000..73f442a
--- /dev/null
+++ b/alsactl/Makefile.in
@@ -0,0 +1,1018 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = alsactl$(EXEEXT)
+@USE_XMLTO_TRUE@am__append_1 = alsactl_init.7
+subdir = alsactl
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
+ "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(systemdsystemunitdir)" \
+ "$(DESTDIR)$(udevrulesdir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am_alsactl_OBJECTS = alsactl-alsactl.$(OBJEXT) alsactl-state.$(OBJEXT) \
+ alsactl-lock.$(OBJEXT) alsactl-utils.$(OBJEXT) \
+ alsactl-init_parse.$(OBJEXT) alsactl-daemon.$(OBJEXT)
+alsactl_OBJECTS = $(am_alsactl_OBJECTS)
+alsactl_LDADD = $(LDADD)
+alsactl_LINK = $(CCLD) $(alsactl_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(alsactl_SOURCES)
+DIST_SOURCES = $(alsactl_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+man7dir = $(mandir)/man7
+NROFF = nroff
+MANS = $(man_MANS)
+DATA = $(systemdsystemunit_DATA) $(udevrules_DATA)
+HEADERS = $(noinst_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+SUBDIRS = init
+man_MANS = alsactl.1 $(am__append_1)
+EXTRA_DIST = alsactl.1 alsactl_init.xml alsa-state.service.in \
+ alsa-restore.service.in alsa-store.service.in \
+ 90-alsa-restore.rules.in
+alsactl_SOURCES = alsactl.c state.c lock.c utils.c init_parse.c daemon.c
+alsactl_CFLAGS = $(AM_CFLAGS) -D__USE_GNU -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" -DSYS_PIDFILE=\"$(ALSACTL_PIDFILE_DIR)/alsactl.pid\"
+noinst_HEADERS = alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
+udevrules_DATA = \
+ 90-alsa-restore.rules
+
+@HAVE_SYSTEMD_TRUE@systemdsystemunit_DATA = \
+@HAVE_SYSTEMD_TRUE@ alsa-state.service \
+@HAVE_SYSTEMD_TRUE@ alsa-restore.service \
+@HAVE_SYSTEMD_TRUE@ alsa-store.service
+
+edit = \
+ $(SED) -r -e 's,@sbindir\@,$(sbindir),g' \
+ -e 's,@daemonswitch\@,$(ALSACTL_DAEMONSWITCH),g' \
+ < $< > $@ || rm $@
+
+CLEANFILES = \
+ alsa-state.service \
+ alsa-restore.service \
+ alsa-store.service \
+ 90-alsa-restore.rules
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsactl/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign alsactl/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+ -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
+alsactl$(EXEEXT): $(alsactl_OBJECTS) $(alsactl_DEPENDENCIES) $(EXTRA_alsactl_DEPENDENCIES)
+ @rm -f alsactl$(EXEEXT)
+ $(alsactl_LINK) $(alsactl_OBJECTS) $(alsactl_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-alsactl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-daemon.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-init_parse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-lock.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-state.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-utils.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+alsactl-alsactl.o: alsactl.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-alsactl.o -MD -MP -MF $(DEPDIR)/alsactl-alsactl.Tpo -c -o alsactl-alsactl.o `test -f 'alsactl.c' || echo '$(srcdir)/'`alsactl.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-alsactl.Tpo $(DEPDIR)/alsactl-alsactl.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='alsactl.c' object='alsactl-alsactl.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-alsactl.o `test -f 'alsactl.c' || echo '$(srcdir)/'`alsactl.c
+
+alsactl-alsactl.obj: alsactl.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-alsactl.obj -MD -MP -MF $(DEPDIR)/alsactl-alsactl.Tpo -c -o alsactl-alsactl.obj `if test -f 'alsactl.c'; then $(CYGPATH_W) 'alsactl.c'; else $(CYGPATH_W) '$(srcdir)/alsactl.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-alsactl.Tpo $(DEPDIR)/alsactl-alsactl.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='alsactl.c' object='alsactl-alsactl.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-alsactl.obj `if test -f 'alsactl.c'; then $(CYGPATH_W) 'alsactl.c'; else $(CYGPATH_W) '$(srcdir)/alsactl.c'; fi`
+
+alsactl-state.o: state.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-state.o -MD -MP -MF $(DEPDIR)/alsactl-state.Tpo -c -o alsactl-state.o `test -f 'state.c' || echo '$(srcdir)/'`state.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-state.Tpo $(DEPDIR)/alsactl-state.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='state.c' object='alsactl-state.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-state.o `test -f 'state.c' || echo '$(srcdir)/'`state.c
+
+alsactl-state.obj: state.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-state.obj -MD -MP -MF $(DEPDIR)/alsactl-state.Tpo -c -o alsactl-state.obj `if test -f 'state.c'; then $(CYGPATH_W) 'state.c'; else $(CYGPATH_W) '$(srcdir)/state.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-state.Tpo $(DEPDIR)/alsactl-state.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='state.c' object='alsactl-state.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-state.obj `if test -f 'state.c'; then $(CYGPATH_W) 'state.c'; else $(CYGPATH_W) '$(srcdir)/state.c'; fi`
+
+alsactl-lock.o: lock.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-lock.o -MD -MP -MF $(DEPDIR)/alsactl-lock.Tpo -c -o alsactl-lock.o `test -f 'lock.c' || echo '$(srcdir)/'`lock.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-lock.Tpo $(DEPDIR)/alsactl-lock.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lock.c' object='alsactl-lock.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-lock.o `test -f 'lock.c' || echo '$(srcdir)/'`lock.c
+
+alsactl-lock.obj: lock.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-lock.obj -MD -MP -MF $(DEPDIR)/alsactl-lock.Tpo -c -o alsactl-lock.obj `if test -f 'lock.c'; then $(CYGPATH_W) 'lock.c'; else $(CYGPATH_W) '$(srcdir)/lock.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-lock.Tpo $(DEPDIR)/alsactl-lock.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lock.c' object='alsactl-lock.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-lock.obj `if test -f 'lock.c'; then $(CYGPATH_W) 'lock.c'; else $(CYGPATH_W) '$(srcdir)/lock.c'; fi`
+
+alsactl-utils.o: utils.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-utils.o -MD -MP -MF $(DEPDIR)/alsactl-utils.Tpo -c -o alsactl-utils.o `test -f 'utils.c' || echo '$(srcdir)/'`utils.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-utils.Tpo $(DEPDIR)/alsactl-utils.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='utils.c' object='alsactl-utils.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-utils.o `test -f 'utils.c' || echo '$(srcdir)/'`utils.c
+
+alsactl-utils.obj: utils.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-utils.obj -MD -MP -MF $(DEPDIR)/alsactl-utils.Tpo -c -o alsactl-utils.obj `if test -f 'utils.c'; then $(CYGPATH_W) 'utils.c'; else $(CYGPATH_W) '$(srcdir)/utils.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-utils.Tpo $(DEPDIR)/alsactl-utils.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='utils.c' object='alsactl-utils.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-utils.obj `if test -f 'utils.c'; then $(CYGPATH_W) 'utils.c'; else $(CYGPATH_W) '$(srcdir)/utils.c'; fi`
+
+alsactl-init_parse.o: init_parse.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-init_parse.o -MD -MP -MF $(DEPDIR)/alsactl-init_parse.Tpo -c -o alsactl-init_parse.o `test -f 'init_parse.c' || echo '$(srcdir)/'`init_parse.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-init_parse.Tpo $(DEPDIR)/alsactl-init_parse.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='init_parse.c' object='alsactl-init_parse.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-init_parse.o `test -f 'init_parse.c' || echo '$(srcdir)/'`init_parse.c
+
+alsactl-init_parse.obj: init_parse.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-init_parse.obj -MD -MP -MF $(DEPDIR)/alsactl-init_parse.Tpo -c -o alsactl-init_parse.obj `if test -f 'init_parse.c'; then $(CYGPATH_W) 'init_parse.c'; else $(CYGPATH_W) '$(srcdir)/init_parse.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-init_parse.Tpo $(DEPDIR)/alsactl-init_parse.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='init_parse.c' object='alsactl-init_parse.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-init_parse.obj `if test -f 'init_parse.c'; then $(CYGPATH_W) 'init_parse.c'; else $(CYGPATH_W) '$(srcdir)/init_parse.c'; fi`
+
+alsactl-daemon.o: daemon.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-daemon.o -MD -MP -MF $(DEPDIR)/alsactl-daemon.Tpo -c -o alsactl-daemon.o `test -f 'daemon.c' || echo '$(srcdir)/'`daemon.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-daemon.Tpo $(DEPDIR)/alsactl-daemon.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='daemon.c' object='alsactl-daemon.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-daemon.o `test -f 'daemon.c' || echo '$(srcdir)/'`daemon.c
+
+alsactl-daemon.obj: daemon.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-daemon.obj -MD -MP -MF $(DEPDIR)/alsactl-daemon.Tpo -c -o alsactl-daemon.obj `if test -f 'daemon.c'; then $(CYGPATH_W) 'daemon.c'; else $(CYGPATH_W) '$(srcdir)/daemon.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-daemon.Tpo $(DEPDIR)/alsactl-daemon.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='daemon.c' object='alsactl-daemon.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-daemon.obj `if test -f 'daemon.c'; then $(CYGPATH_W) 'daemon.c'; else $(CYGPATH_W) '$(srcdir)/daemon.c'; fi`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-man7: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man7dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.7[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man7:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man7dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.7[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
+install-systemdsystemunitDATA: $(systemdsystemunit_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(systemdsystemunitdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(systemdsystemunitdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systemdsystemunitdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(systemdsystemunitdir)" || exit $$?; \
+ done
+
+uninstall-systemdsystemunitDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(systemdsystemunitdir)'; $(am__uninstall_files_from_dir)
+install-udevrulesDATA: $(udevrules_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(udevrules_DATA)'; test -n "$(udevrulesdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(udevrulesdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(udevrulesdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(udevrulesdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(udevrulesdir)" || exit $$?; \
+ done
+
+uninstall-udevrulesDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(udevrules_DATA)'; test -n "$(udevrulesdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(udevrulesdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(systemdsystemunitdir)" "$(DESTDIR)$(udevrulesdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+@HAVE_SYSTEMD_FALSE@install-data-hook:
+clean: clean-recursive
+
+clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-man install-systemdsystemunitDATA \
+ install-udevrulesDATA
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man1 install-man7
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS \
+ uninstall-systemdsystemunitDATA uninstall-udevrulesDATA
+
+uninstall-man: uninstall-man1 uninstall-man7
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am \
+ install-data-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic \
+ clean-sbinPROGRAMS cscopelist cscopelist-recursive ctags \
+ ctags-recursive distclean distclean-compile distclean-generic \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man1 install-man7 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-sbinPROGRAMS install-strip \
+ install-systemdsystemunitDATA install-udevrulesDATA \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am uninstall-man \
+ uninstall-man1 uninstall-man7 uninstall-sbinPROGRAMS \
+ uninstall-systemdsystemunitDATA uninstall-udevrulesDATA
+
+
+@HAVE_SYSTEMD_TRUE@install-data-hook:
+@HAVE_SYSTEMD_TRUE@ $(MKDIR_P) -m 0755 \
+@HAVE_SYSTEMD_TRUE@ $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \
+@HAVE_SYSTEMD_TRUE@ $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants
+@HAVE_SYSTEMD_TRUE@ ( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \
+@HAVE_SYSTEMD_TRUE@ rm -f alsa-state.service alsa-restore.service && \
+@HAVE_SYSTEMD_TRUE@ $(LN_S) ../alsa-state.service alsa-state.service && \
+@HAVE_SYSTEMD_TRUE@ $(LN_S) ../alsa-restore.service alsa-restore.service)
+@HAVE_SYSTEMD_TRUE@ ( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \
+@HAVE_SYSTEMD_TRUE@ rm -f alsa-store.service && \
+@HAVE_SYSTEMD_TRUE@ $(LN_S) ../alsa-store.service alsa-store.service )
+
+alsa-state.service: alsa-state.service.in
+ $(edit)
+
+alsa-restore.service: alsa-restore.service.in
+ $(edit)
+
+alsa-store.service: alsa-store.service.in
+ $(edit)
+
+90-alsa-restore.rules: 90-alsa-restore.rules.in
+ $(edit)
+
+%.7: %.xml
+ xmlto man $?
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/alsactl/NOTICE b/alsactl/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/alsactl/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/alsactl/alsa-restore.service.in b/alsactl/alsa-restore.service.in
new file mode 100644
index 0000000..245a439
--- /dev/null
+++ b/alsactl/alsa-restore.service.in
@@ -0,0 +1,17 @@
+#
+# Note that two different ALSA card state management schemes exist and they
+# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
+#
+
+[Unit]
+Description=Restore Sound Card State
+ConditionPathExists=!@daemonswitch@
+DefaultDependencies=no
+After=alsa-state.service
+Before=shutdown.target
+Conflicts=shutdown.target
+
+[Service]
+Type=oneshot
+ExecStart=-@sbindir@/alsactl restore
+StandardOutput=syslog
diff --git a/alsactl/alsa-state.service.in b/alsactl/alsa-state.service.in
new file mode 100644
index 0000000..768c5a8
--- /dev/null
+++ b/alsactl/alsa-state.service.in
@@ -0,0 +1,17 @@
+#
+# Note that two different ALSA card state management schemes exist and they
+# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
+#
+
+[Unit]
+Description=Manage Sound Card State (restore and store)
+ConditionPathExists=@daemonswitch@
+DefaultDependencies=no
+After=sysinit.target
+Before=shutdown.target
+Conflicts=shutdown.target
+
+[Service]
+Type=simple
+ExecStart=-@sbindir@/alsactl -s -n 19 -c rdaemon
+ExecStop=-@sbindir@/alsactl -s rkill save_and_quit
diff --git a/alsactl/alsa-store.service.in b/alsactl/alsa-store.service.in
new file mode 100644
index 0000000..f1a56bb
--- /dev/null
+++ b/alsactl/alsa-store.service.in
@@ -0,0 +1,15 @@
+#
+# Note that two different ALSA card state management schemes exist and they
+# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
+#
+
+[Unit]
+Description=Store Sound Card State
+ConditionPathExists=!@daemonswitch@
+DefaultDependencies=no
+Before=shutdown.target
+
+[Service]
+Type=oneshot
+ExecStart=@sbindir@/alsactl store
+StandardOutput=syslog
diff --git a/alsactl/alsactl.1 b/alsactl/alsactl.1
new file mode 100644
index 0000000..45ac8a6
--- /dev/null
+++ b/alsactl/alsactl.1
@@ -0,0 +1,153 @@
+.TH ALSACTL 1 "05 Apr 2013"
+.SH NAME
+alsactl \- advanced controls for ALSA soundcard driver
+
+.SH SYNOPSIS
+
+\fBalsactl\fP [\fIoptions\fP] [\fIstore\fP|\fIrestore\fP|\fIinit\fP] <card # or id or device>
+
+.SH DESCRIPTION
+\fBalsactl\fP is used to control advanced settings for the ALSA
+soundcard drivers. It supports multiple soundcards. If your card has
+features that you can't seem to control from a mixer application,
+you have come to the right place.
+
+.SH COMMANDS
+
+\fIstore\fP saves the current driver state for the selected soundcard
+to the configuration file.
+
+\fIrestore\fP loads driver state for the selected soundcard from the
+configuration file. If restoring fails (eventually partly), the init
+action is called.
+
+\fInrestore\fP is like \fIrestore\fP, but it notifies also the daemon
+to do new rescan for available soundcards.
+
+\fIinit\fP tries to initialize all devices to a default state. If device
+is not known, error code 99 is returned.
+
+\fIdaemon\fP manages to save periodically the sound state.
+
+\fIrdaemon\fP like \fIdaemon\fP but restore the sound state at first.
+
+\fIkill\fP notifies the daemon to do the specified operation (quit,
+rescan, save_and_quit).
+
+If no soundcards are specified, setup for all cards will be saved or
+loaded.
+
+.SH OPTIONS
+
+.TP
+\fI\-h, \-\-help\fP
+Help: show available flags and commands.
+
+.TP
+\fI\-d, \-\-debug\fP
+Use debug mode: a bit more verbose.
+
+.TP
+\fI\-v, \-\-version\fP
+Print alsactl version number.
+
+.TP
+\fI\-f, \-\-file\fP
+Select the configuration file to use. The default is /var/lib/alsa/asound.state.
+
+.TP
+\fI\-F, \-\-force\fP
+Used with restore command. Try to restore the matching control elements
+as much as possible. This option is set as default now.
+
+.TP
+\fI\-g, \-\-ignore\fP
+Used with store and restore commands. Do not show 'No soundcards found'
+and do not set an error exit code when soundcards are not installed.
+
+.TP
+\fI\-P, \-\-pedantic\fP
+Used with restore command. Don't restore mismatching control elements.
+This option was the old default behavior.
+
+.TP
+\fI\-I, \-\-no\-init\-fallback\fP
+Don't initialize cards if restore fails. Since version 1.0.18,
+\fBalsactl\fP tries to initialize the card with the restore operation
+as default. But this can cause incompatibility with the older version.
+The caller may expect that the state won't be touched if no state file
+exists. This option takes the restore behavior back to the older
+version by suppressing the initialization.
+
+.TP
+\fI\-r, \-\-runstate\fP
+Save restore and init state to this file. The file will contain only errors.
+Errors are appended with the soundcard id to the end of file.
+
+.TP
+\fI\-R, \-\-remove\fP
+Remove runstate file at first.
+
+.TP
+\fI\-E, \-\-env\fP #=#
+Set environment variable (useful for init action or you may override
+ALSA_CONFIG_PATH to read different or optimized configuration - may be
+useful for "boot" scripts).
+
+.TP
+\fI\-i, \-\-initfile\fP
+The configuration file for init. By default, PREFIX/share/alsa/init/00main
+is used.
+
+.TP
+\fI\-p, \-\-period\fP
+The store period in seconds for the daemon command.
+
+.TP
+\fI\-e, \-\-pid-file\fP
+The pathname to store the process-id file in the HDB UUCP format (ASCII).
+
+.TP
+\fI\-b, \-\-background\fP
+Run the task in background.
+
+.TP
+\fI\-s, \-\-syslog\fP
+Use syslog for messages.
+
+.TP
+\fI\-n, \-\-nice\fP
+Set the process priority (see 'man nice')
+
+.TP
+\fI\-c, \-\-sched-idle\fP
+Set the process scheduling policy to idle (SCHED_IDLE).
+
+.SH FILES
+\fI/var/lib/alsa/asound.state\fP (or whatever file you specify with the
+\fB\-f\fP flag) is used to store current settings for your
+soundcards. The settings include all the usual soundcard mixer
+settings. More importantly, alsactl is
+capable of controlling other card-specific features that mixer apps
+usually don't know about.
+
+The configuration file is generated automatically by running
+\fBalsactl store\fP. Editing the configuration file by hand may be
+necessary for some soundcard features (e.g. enabling/disabling
+automatic mic gain, digital output, joystick/game ports, some future MIDI
+routing options, etc).
+
+.SH SEE ALSO
+\fB
+amixer(1),
+alsamixer(1),
+aplay(1),
+alsactl_init(7)
+\fP
+
+.SH BUGS
+None known.
+
+.SH AUTHOR
+\fBalsactl\fP is by Jaroslav Kysela <perex@perex.cz> and Abramo Bagnara
+<abramo@alsa\-project.org>. This document is by Paul Winkler <zarmzarm@erols.com>.
diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c
new file mode 100644
index 0000000..75baad8
--- /dev/null
+++ b/alsactl/alsactl.c
@@ -0,0 +1,383 @@
+/*
+ * Advanced Linux Sound Architecture Control Program
+ * Copyright (c) by Abramo Bagnara <abramo@alsa-project.org>
+ * Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "aconfig.h"
+#include "version.h"
+#include <getopt.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <assert.h>
+#include <errno.h>
+#include <syslog.h>
+#include <sched.h>
+#include <alsa/asoundlib.h>
+#include "alsactl.h"
+
+#ifndef SYS_ASOUNDRC
+#define SYS_ASOUNDRC "/var/lib/alsa/asound.state"
+#endif
+#ifndef SYS_PIDFILE
+#define SYS_PIDFILE "/var/run/alsactl.pid"
+#endif
+
+int debugflag = 0;
+int force_restore = 1;
+int ignore_nocards = 0;
+int do_lock = 0;
+int use_syslog = 0;
+char *command;
+char *statefile = NULL;
+
+#define TITLE 0x0100
+#define HEADER 0x0200
+#define FILEARG 0x0400
+#define ENVARG 0x0800
+#define INTARG 0x1000
+#define EMPCMD 0x2000
+#define CARDCMD 0x4000
+#define KILLCMD 0x8000
+
+struct arg {
+ int sarg;
+ char *larg;
+ char *comment;
+};
+
+static struct arg args[] = {
+{ TITLE, NULL, "Usage: alsactl <options> command" },
+{ HEADER, NULL, "global options:" },
+{ 'h', "help", "this help" },
+{ 'd', "debug", "debug mode" },
+{ 'v', "version", "print version of this program" },
+{ HEADER, NULL, "Available state options:" },
+{ FILEARG | 'f', "file", "configuration file (default " SYS_ASOUNDRC ")" },
+{ 'l', "lock", "use file locking to serialize concurrent access" },
+{ 'F', "force", "try to restore the matching controls as much as possible" },
+{ 0, NULL, " (default mode)" },
+{ 'g', "ignore", "ignore 'No soundcards found' error" },
+{ 'P', "pedantic", "do not restore mismatching controls (old default)" },
+{ 'I', "no-init-fallback", "" },
+{ 0, NULL, "don't initialize even if restore fails" },
+{ FILEARG | 'r', "runstate", "save restore and init state to this file (only errors)" },
+{ 0, NULL, " default settings is 'no file set'" },
+{ 'R', "remove", "remove runstate file at first, otherwise append errors" },
+{ INTARG | 'p', "period", "store period in seconds for the daemon command" },
+{ FILEARG | 'e', "pid-file", "pathname for the process id (daemon mode)" },
+{ HEADER, NULL, "Available init options:" },
+{ ENVARG | 'E', "env", "set environment variable for init phase (NAME=VALUE)" },
+{ FILEARG | 'i', "initfile", "main configuation file for init phase" },
+{ 0, NULL, " (default " DATADIR "/init/00main)" },
+{ 'b', "background", "run daemon in background" },
+{ 's', "syslog", "use syslog for messages" },
+{ INTARG | 'n', "nice", "set the process priority (see 'man nice')" },
+{ 'c', "sched-idle", "set the process scheduling policy to idle (SCHED_IDLE)" },
+{ HEADER, NULL, "Available commands:" },
+{ CARDCMD, "store", "save current driver setup for one or each soundcards" },
+{ EMPCMD, NULL, " to configuration file" },
+{ CARDCMD, "restore", "load current driver setup for one or each soundcards" },
+{ EMPCMD, NULL, " from configuration file" },
+{ CARDCMD, "nrestore", "like restore, but notify the daemon to rescan soundcards" },
+{ CARDCMD, "init", "initialize driver to a default state" },
+{ CARDCMD, "daemon", "store state periodically for one or each soundcards" },
+{ CARDCMD, "rdaemon", "like daemon but do the state restore at first" },
+{ KILLCMD, "kill", "notify daemon to quit, rescan or save_and_quit" },
+{ 0, NULL, NULL }
+};
+
+static void help(void)
+{
+ struct arg *n = args, *a;
+ char *larg, sa[4], buf[32];
+ int sarg;
+
+ sa[0] = '-';
+ sa[2] = ',';
+ sa[3] = '\0';
+ while (n->comment) {
+ a = n;
+ n++;
+ sarg = a->sarg;
+ if (sarg & (HEADER|TITLE)) {
+ printf("%s%s\n", (sarg & HEADER) != 0 ? "\n" : "",
+ a->comment);
+ continue;
+ }
+ buf[0] = '\0';
+ larg = a->larg;
+ if (sarg & (EMPCMD|CARDCMD|KILLCMD)) {
+ if (sarg & CARDCMD)
+ strcat(buf, "<card>");
+ else if (sarg & KILLCMD)
+ strcat(buf, "<cmd>");
+ printf(" %-8s %-6s %s\n", larg ? larg : "",
+ buf, a->comment);
+ continue;
+ }
+ sa[1] = a->sarg;
+ sprintf(buf, "%s%s%s", sa[1] ? sa : "",
+ larg ? "--" : "", larg ? larg : "");
+ if (sarg & ENVARG)
+ strcat(buf, " #=#");
+ else if (sarg & (FILEARG|INTARG))
+ strcat(buf, " #");
+ printf(" %-15s %s\n", buf, a->comment);
+ }
+}
+
+#define NO_NICE (-100000)
+
+static void do_nice(int use_nice, int sched_idle)
+{
+ struct sched_param sched_param;
+
+ if (use_nice != NO_NICE && nice(use_nice) < 0)
+ error("nice(%i): %s", use_nice, strerror(errno));
+ if (sched_idle) {
+ if (sched_getparam(0, &sched_param) >= 0) {
+ sched_param.sched_priority = 0;
+ if (!sched_setscheduler(0, SCHED_RR, &sched_param))
+ error("sched_setparam failed: %s", strerror(errno));
+ } else {
+ error("sched_getparam failed: %s", strerror(errno));
+ }
+ }
+}
+
+int main(int argc, char *argv[])
+{
+ static const char *const devfiles[] = {
+ "/dev/snd/controlC",
+ "/dev/snd/pcmC",
+ "/dev/snd/midiC",
+ "/dev/snd/hwC",
+ NULL
+ };
+ char *cfgfile = SYS_ASOUNDRC;
+ char *initfile = DATADIR "/init/00main";
+ char *pidfile = SYS_PIDFILE;
+ char *cardname, ncardname[16];
+ char *cmd;
+ const char *const *tmp;
+ int removestate = 0;
+ int init_fallback = 1; /* new default behavior */
+ int period = 5*60;
+ int background = 0;
+ int daemoncmd = 0;
+ int use_nice = NO_NICE;
+ int sched_idle = 0;
+ struct arg *a;
+ struct option *o;
+ int i, j, k, res;
+ struct option *long_option;
+ char *short_option;
+
+ long_option = calloc(ARRAY_SIZE(args), sizeof(struct option));
+ if (long_option == NULL)
+ exit(EXIT_FAILURE);
+ short_option = malloc(128);
+ if (short_option == NULL) {
+ free(long_option);
+ exit(EXIT_FAILURE);
+ }
+ for (i = j = k = 0; i < ARRAY_SIZE(args); i++) {
+ a = &args[i];
+ if ((a->sarg & 0xff) == 0)
+ continue;
+ o = &long_option[j];
+ o->name = a->larg;
+ o->has_arg = (a->sarg & (ENVARG|FILEARG|INTARG)) != 0;
+ o->flag = NULL;
+ o->val = a->sarg & 0xff;
+ j++;
+ short_option[k++] = o->val;
+ if (o->has_arg)
+ short_option[k++] = ':';
+ }
+ short_option[k] = '\0';
+ command = argv[0];
+ while (1) {
+ int c;
+
+ if ((c = getopt_long(argc, argv, short_option, long_option,
+ NULL)) < 0)
+ break;
+ switch (c) {
+ case 'h':
+ help();
+ res = EXIT_SUCCESS;
+ goto out;
+ case 'f':
+ cfgfile = optarg;
+ break;
+ case 'l':
+ do_lock = 1;
+ break;
+ case 'F':
+ force_restore = 1;
+ break;
+ case 'g':
+ ignore_nocards = 1;
+ break;
+ case 'E':
+ if (putenv(optarg)) {
+ fprintf(stderr, "environment string '%s' is wrong\n", optarg);
+ res = EXIT_FAILURE;
+ goto out;
+ }
+ break;
+ case 'i':
+ initfile = optarg;
+ break;
+ case 'I':
+ init_fallback = 0;
+ break;
+ case 'r':
+ statefile = optarg;
+ break;
+ case 'R':
+ removestate = 1;
+ break;
+ case 'P':
+ force_restore = 0;
+ break;
+ case 'p':
+ period = atoi(optarg);
+ if (period < 10)
+ period = 5*60;
+ else if (period > 24*60*60)
+ period = 24*60*60;
+ break;
+ case 'e':
+ pidfile = optarg;
+ break;
+ case 'b':
+ background = 1;
+ break;
+ case 's':
+ use_syslog = 1;
+ break;
+ case 'n':
+ use_nice = atoi(optarg);
+ if (use_nice < -20)
+ use_nice = -20;
+ else if (use_nice > 19)
+ use_nice = 19;
+ break;
+ case 'c':
+ sched_idle = 1;
+ break;
+ case 'd':
+ debugflag = 1;
+ break;
+ case 'v':
+ printf("alsactl version " SND_UTIL_VERSION_STR "\n");
+ res = EXIT_SUCCESS;
+ goto out;
+ case '?': // error msg already printed
+ help();
+ res = EXIT_FAILURE;
+ goto out;
+ default: // should never happen
+ fprintf(stderr,
+ "Invalid option '%c' (%d) not handled??\n", c, c);
+ }
+ }
+ free(short_option);
+ short_option = NULL;
+ free(long_option);
+ long_option = NULL;
+ if (argc - optind <= 0) {
+ fprintf(stderr, "alsactl: Specify command...\n");
+ res = 0;
+ goto out;
+ }
+
+ cardname = argc - optind > 1 ? argv[optind + 1] : NULL;
+ for (tmp = devfiles; cardname != NULL && *tmp != NULL; tmp++) {
+ int len = strlen(*tmp);
+ if (!strncmp(cardname, *tmp, len)) {
+ long l = strtol(cardname + len, NULL, 0);
+ sprintf(ncardname, "%li", l);
+ cardname = ncardname;
+ break;
+ }
+ }
+
+ /* the global system file should be always locked */
+ if (strcmp(cfgfile, SYS_ASOUNDRC) == 0)
+ do_lock = 1;
+
+ /* when running in background, use syslog for reports */
+ if (background) {
+ use_syslog = 1;
+ daemon(0, 0);
+ }
+
+ cmd = argv[optind];
+ daemoncmd = strcmp(cmd, "daemon") == 0 || strcmp(cmd, "rdaemon") == 0;
+
+ if (use_syslog) {
+ openlog("alsactl", LOG_CONS|LOG_PID, LOG_DAEMON);
+ if (daemoncmd)
+ syslog(LOG_INFO, "alsactl " SND_UTIL_VERSION_STR " daemon started");
+ }
+
+ if (!strcmp(cmd, "init")) {
+ res = init(initfile, cardname);
+ snd_config_update_free_global();
+ } else if (!strcmp(cmd, "store")) {
+ res = save_state(cfgfile, cardname);
+ } else if (!strcmp(cmd, "restore") ||
+ !strcmp(cmd, "rdaemon") ||
+ !strcmp(cmd, "nrestore")) {
+ if (removestate)
+ remove(statefile);
+ res = load_state(cfgfile, initfile, cardname, init_fallback);
+ if (!strcmp(cmd, "rdaemon")) {
+ do_nice(use_nice, sched_idle);
+ res = state_daemon(cfgfile, cardname, period, pidfile);
+ }
+ if (!strcmp(cmd, "nrestore"))
+ res = state_daemon_kill(pidfile, "rescan");
+ } else if (!strcmp(cmd, "daemon")) {
+ do_nice(use_nice, sched_idle);
+ res = state_daemon(cfgfile, cardname, period, pidfile);
+ } else if (!strcmp(cmd, "kill")) {
+ res = state_daemon_kill(pidfile, cardname);
+ } else {
+ fprintf(stderr, "alsactl: Unknown command '%s'...\n", cmd);
+ res = -ENODEV;
+ }
+
+ snd_config_update_free_global();
+ if (use_syslog) {
+ if (daemoncmd)
+ syslog(LOG_INFO, "alsactl daemon stopped");
+ closelog();
+ }
+ return res < 0 ? -res : 0;
+
+out:
+ free(short_option);
+ free(long_option);
+ return res;
+}
diff --git a/alsactl/alsactl.h b/alsactl/alsactl.h
new file mode 100644
index 0000000..9109a70
--- /dev/null
+++ b/alsactl/alsactl.h
@@ -0,0 +1,56 @@
+extern int debugflag;
+extern int force_restore;
+extern int ignore_nocards;
+extern int do_lock;
+extern int use_syslog;
+extern char *command;
+extern char *statefile;
+
+void info_(const char *fcn, long line, const char *fmt, ...);
+void error_(const char *fcn, long line, const char *fmt, ...);
+void cerror_(const char *fcn, long line, int cond, const char *fmt, ...);
+void dbg_(const char *fcn, long line, const char *fmt, ...);
+
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define info(...) do { info_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
+#define error(...) do { error_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
+#define cerror(cond, ...) do { cerror_(__FUNCTION__, __LINE__, (cond) != 0, __VA_ARGS__); } while (0)
+#define dbg(...) do { dbg_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
+#else
+#define info(args...) do { info_(__FUNCTION__, __LINE__, ##args); } while (0)
+#define error(args...) do { error_(__FUNCTION__, __LINE__, ##args); } while (0)
+#define cerror(cond, ...) do { error_(__FUNCTION__, __LINE__, (cond) != 0, ##args); } while (0)
+#define dbg(args...) do { dbg_(__FUNCTION__, __LINE__, ##args); } while (0)
+#endif
+
+int init(const char *file, const char *cardname);
+int state_lock(const char *file, int lock, int timeout);
+int save_state(const char *file, const char *cardname);
+int load_state(const char *file, const char *initfile, const char *cardname,
+ int do_init);
+int power(const char *argv[], int argc);
+int state_daemon(const char *file, const char *cardname, int period,
+ const char *pidfile);
+int state_daemon_kill(const char *pidfile, const char *cmd);
+
+/* utils */
+
+int file_map(const char *filename, char **buf, size_t *bufsize);
+void file_unmap(void *buf, size_t bufsize);
+size_t line_width(const char *buf, size_t bufsize, size_t pos);
+void initfailed(int cardnumber, const char *reason, int exitcode);
+
+static inline int hextodigit(int c)
+{
+ if (c >= '0' && c <= '9')
+ c -= '0';
+ else if (c >= 'a' && c <= 'f')
+ c = c - 'a' + 10;
+ else if (c >= 'A' && c <= 'F')
+ c = c - 'A' + 10;
+ else
+ return -1;
+ return c;
+}
+
+#define ARRAY_SIZE(a) (sizeof (a) / sizeof (a)[0])
diff --git a/alsactl/alsactl_init.xml b/alsactl/alsactl_init.xml
new file mode 100644
index 0000000..bce26f5
--- /dev/null
+++ b/alsactl/alsactl_init.xml
@@ -0,0 +1,633 @@
+<?xml version='1.0'?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<article>
+ <section>
+ <title>alsactl init</title>
+ <refentry>
+ <refentryinfo>
+ <title>alsactl init</title>
+ <date>July 2008</date>
+ <productname>alsactl</productname>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>alsactl_init</refentrytitle>
+ <manvolnum>7</manvolnum>
+ <refmiscinfo class="version"></refmiscinfo>
+ </refmeta>
+
+ <refnamediv>
+ <refname>alsactl init</refname>
+ <refpurpose>alsa control management - initialization</refpurpose>
+ </refnamediv>
+
+ <refsect1><title>DESCRIPTION</title>
+ <para>"alsactl init" provides soundcard specific initialization.</para>
+ </refsect1>
+
+ <refsect1><title>CONFIGURATION</title>
+ <para>All "alsactl init" configuration files are placed in
+ <filename>/usr/share/alsa/init/</filename> directory. The top level
+ configuration file is <filename>/usr/share/alsa/init/00main</filename>.
+ The default top-level file can be also specified using -i or
+ --initfile parameter for the alsactl tool.
+ Every file consists of a set of lines of text. All empty lines or
+ lines beginning with '#' will be ignored.</para>
+
+ <refsect2><title>Rules files</title>
+ <para>The "alsactl init" rules are read from the files located
+ in the <filename>/usr/share/alsa/init/*</filename>. The top
+ level configuration file is <filename>/usr/share/alsa/init/00main</filename>.
+ Every line in the rules file contains at least one key value pair.
+ There are two kind of keys, match and assignment keys. If all match
+ keys are matching against its value, the rule gets applied and the
+ assign keys get the specified value assigned.</para>
+
+ <para>A rule may consists of a list of one or more key value pairs
+ separated by a comma. Each key has a distinct operation, depending
+ on the used operator. Valid operators are:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>==</option></term>
+ <listitem>
+ <para>Compare for equality.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>!=</option></term>
+ <listitem>
+ <para>Compare for non-equality.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>=</option></term>
+ <listitem>
+ <para>Assign a value to a key. Keys that represent a list,
+ are reset and only this single value is assigned.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>+=</option></term>
+ <listitem>
+ <para>Add the value to a key that holds a list
+ of entries.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>:=</option></term>
+ <listitem>
+ <para>Assign a value to a key finally; disallow any
+ later changes, which may be used to prevent changes by
+ any later rules.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+
+ <para>The following key names can be used to match against device
+ properties:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>CARDINDEX</option></term>
+ <listitem>
+ <para>Match the card index of the ALSA driver.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>CTL{<replaceable>attribute</replaceable>}</option></term>
+ <listitem>
+ <para>Set or test universal control attribute. Possible
+ attributes:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>numid</option></term>
+ <listitem>
+ <para>Numeric control identification.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>iface</option>, <option>interface</option></term>
+ <listitem>
+ <para>Control interface name (CARD, HWEDEP, MIXER, PCM, RAWMIDI, TIMER, SEQUENCER)</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>subdev</option>, <option>subdevice</option></term>
+ <listitem>
+ <para>Subdevice number.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>name</option></term>
+ <listitem>
+ <para>Control name</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>index</option></term>
+ <listitem>
+ <para>Control index</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>type</option></term>
+ <listitem>
+ <para>Control type (BOOLEAN, INTEGER, INTEGER64, ENUMERATED, BYTES, IEC958)</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>attr</option>, <option>attribute</option></term>
+ <listitem>
+ <para>Attributes (stored in a string - use match characters * and ?):</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>r</option></term>
+ <listitem>
+ <para>control is readable</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>w</option></term>
+ <listitem>
+ <para>control is writable</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>v</option></term>
+ <listitem>
+ <para>control is volatile</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>i</option></term>
+ <listitem>
+ <para>control is inactive</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>l</option></term>
+ <listitem>
+ <para>control is locked</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>R</option></term>
+ <listitem>
+ <para>control is TLV readable</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>W</option></term>
+ <listitem>
+ <para>control is TLV writable</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>C</option></term>
+ <listitem>
+ <para>control is TLV commandable</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>o</option></term>
+ <listitem>
+ <para>process is owner of this control</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>u</option></term>
+ <listitem>
+ <para>control created in user space</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>owner</option></term>
+ <listitem>
+ <para>Control owner process PID number</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>count</option></term>
+ <listitem>
+ <para>Control count of values</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>min</option></term>
+ <listitem>
+ <para>Value range - minimum value</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>max</option></term>
+ <listitem>
+ <para>Value range - maximum value</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>step</option></term>
+ <listitem>
+ <para>Value range - step value</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>dBmin</option></term>
+ <listitem>
+ <para>Value range - minimum dB value</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>dBmax</option></term>
+ <listitem>
+ <para>Value range - maximum dB value</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>items</option></term>
+ <listitem>
+ <para>Enumerated value - number of text items</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>enums</option></term>
+ <listitem>
+ <para>Enumerated value - list of text names stored between '|' character</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>value</option></term>
+ <listitem>
+ <para>Value of control stored to a string delimited by
+ comma (,).</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>do_search</option></term>
+ <listitem>
+ <para>Search for a control. Value "1" is returned
+ if a control was found. The CTL{name} key might
+ contain match characters * and ?. An control index
+ might be specified as first argument starting from
+ zero (e.g. CTL{do_search 2}="1").</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>do_count</option></term>
+ <listitem>
+ <para>Search for a controls and return total count
+ of matched ones. The CTL{name} key might contain match
+ characters * and ?.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>CONFIG{sysfs_device}</option></term>
+ <listitem>
+ <para>The relative path to sysfs subsystem specifying
+ the root directory of a soundcard device. Usually,
+ it should be set to "/class/sound/card$cardinfo{card}/device".
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>ATTR{<replaceable>filename</replaceable>}</option></term>
+ <listitem>
+ <para>Match sysfs attribute values of the soundcard device.
+ The relative path to sysfs tree must be defined by
+ CONFIG{sysfs_device} key. Trailing whitespace in the attribute
+ values is ignored, if the specified match value does
+ not contain trailing whitespace itself. Depending on
+ the type of operator, this key is also used to set
+ the value of a sysfs attribute.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>ENV{<replaceable>key</replaceable>}</option></term>
+ <listitem>
+ <para>Match against the value of an environment variable. Up
+ to five <option>ENV</option> keys can be specified per rule.
+ Depending on the type of operator, this key is also used
+ to export a variable to the environment.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>PROGRAM</option></term>
+ <listitem>
+ <para>Execute external program. The key is true, if
+ the program returns without exit code zero. The whole event
+ environment is available to the executed program. The
+ program's output printed to stdout is available for
+ the RESULT key.</para>
+ <para>Several buildin commands are available:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>__ctl_search</option></term>
+ <listitem>
+ <para>Search for a control. The CTL{name} key might
+ contain match characters * and ?. An control index
+ might be specified as first argument starting from
+ zero (e.g. PROGRAM="__ctl_search 2").</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>__ctl_count</option></term>
+ <listitem>
+ <para>Search for a controls and return total count
+ of matched ones. The CTL{name} key might contain match
+ characters * and ?.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>RESULT</option></term>
+ <listitem>
+ <para>Match the returned string of the last PROGRAM call.
+ This key can be used in the same or in any later rule
+ after a PROGRAM call.</para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>Most of the fields support a shell style pattern matching.
+ The following pattern characters are supported:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>*</option></term>
+ <listitem>
+ <para>Matches zero, or any number of characters.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>?</option></term>
+ <listitem>
+ <para>Matches any single character.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>[]</option></term>
+ <listitem>
+ <para>Matches any single character specified within
+ the brackets. For example, the pattern string 'tty[SR]'
+ would match either 'ttyS' or 'ttyR'. Ranges are also
+ supported within this match with the '-' character.
+ For example, to match on the range of all digits,
+ the pattern [0-9] would be used. If the first character
+ following the '[' is a '!', any characters
+ not enclosed are matched.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+
+ <para>The following keys can get values assigned:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>CTL{numid}</option>, <option>CTL{iface}</option>,
+ <option>CTL{device}</option>, <option>CTL{subdev}</option>,
+ <option>CTL{name}</option>, <option>CTL{index}</option>,
+ </term>
+ <listitem>
+ <para>Select universal control element.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>CTL{value}</option></term>
+ <listitem>
+ <para>Value is set (written) also to soundcard's control
+ device and RESULT key is set to errno code. The result of
+ set operation is always true (it means continue with
+ next key on line).</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>CTL{values}</option></term>
+ <listitem>
+ <para>Value is set (written) also to soundcard's control
+ device (all control values are set to specified value) and
+ RESULT key is set to errno code. The result of
+ set operation is always true (it means continue with
+ next key on line).</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><option>CTL{write}</option></term>
+ <listitem>
+ <para>Value is set (written) also to soundcard's control
+ device (all control values are set to specified value).
+ The result of set operation is true when operation
+ succeed (it means continue with next key on line).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>ENV{<replaceable>key</replaceable>}</option></term>
+ <listitem>
+ <para>Export a variable to the environment. Depending on the type of operator,
+ this key is also to match against an environment variable.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>RESULT</option></term>
+ <listitem>
+ <para>Set RESULT variable. Note that PROGRAM also sets
+ this variable, but setting this variable manually
+ might be useful to change code execution order (included
+ files).</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>LABEL</option></term>
+ <listitem>
+ <para>Named label where a GOTO can jump to.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>GOTO</option></term>
+ <listitem>
+ <para>Jumps to the next LABEL with a matching name.
+ The goto cannot jump backward.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>INCLUDE</option></term>
+ <listitem>
+ <para>Include the specified filename or files in specified directory.
+ </para>
+ <para>
+ When a directory is specified, only the files with the
+ extension ".conf" are read.
+ Also they are read in the alphabetical order.
+ Thus it's highly recommended to use some number prefix
+ (e.g. "01-something.conf") to assure the order of execucions.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>ACCESS</option></term>
+ <listitem>
+ <para>Check if specified file or directory exists</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>CONFIG{sysfs_device}</option></term>
+ <listitem>
+ <para>The relative path to sysfs subsystem specifying
+ the root directory of a soundcard device. Usually,
+ it should be set to "/class/sound/card$cardinfo{card}/device".
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>PRINT</option></term>
+ <listitem>
+ <para>PRINT value to stdout.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>ERROR</option></term>
+ <listitem>
+ <para>PRINT value to stderr.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>EXIT</option></term>
+ <listitem>
+ <para>Exit immediately and set program exit code to value
+ (should be integer). If value is "return" string,
+ parser leaves current included file and returns to parent
+ configuration file.</para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ <para>The <option>PROGRAM</option>, <option>RESULT</option>,
+ <option>CTL{value}</option>,
+ <option>PRINT</option>, <option>ERROR</option>,
+ <option>EXIT</option>, <option>CONFIG{}</option>
+ fields support simple printf-like string substitutions.
+ It allows the use of the complete environment set by earlier matching
+ rules. For all other fields, substitutions are applied while the individual rule is
+ being processed. The available substitutions are:</para>
+ <variablelist>
+ <varlistentry>
+ <term><option>$cardinfo{<replaceable>attribute</replaceable>}</option>, <option>%i{<replaceable>attribute</replaceable>}</option></term>
+ <listitem>
+ <para>See CARDINFO{} for more details.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$ctl{<replaceable>attribute</replaceable>}</option>, <option>%C{<replaceable>attribute</replaceable>}</option></term>
+ <listitem>
+ <para>See CTL{} for more details.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$attr{<replaceable>file</replaceable>}</option>, <option>%s{<replaceable>file</replaceable>}</option></term>
+ <listitem>
+ <para>The value of a sysfs attribute found at the device, where
+ all keys of the rule have matched.
+ If the attribute is a symlink, the last element of the symlink target is
+ returned as the value.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$env{<replaceable>key</replaceable>}</option>, <option>%E{<replaceable>key</replaceable>}</option></term>
+ <listitem>
+ <para>The value of an environment variable.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$result</option>, <option>%c</option></term>
+ <listitem>
+ <para>The string returned by the external program requested with PROGRAM.
+ A single part of the string, separated by a space character may be selected
+ by specifying the part number as an attribute: <option>%c{N}</option>.
+ If the number is followed by the '+' char this part plus all remaining parts
+ of the result string are substituted: <option>%c{N+}</option></para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$sysfsroot</option>, <option>%r</option></term>
+ <listitem>
+ <para>Root directory where sysfs file-system is mounted.
+ Ususally, this value is just "/sys".</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$config{<replaceable>key</replaceable>}</option>, <option>%g{<replaceable>key</replaceable>}</option></term>
+ <listitem>
+ <para>The value of a configuration variable. See CONFIG{} for more details.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>%%</option></term>
+ <listitem>
+ <para>The '%' character itself.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>$$</option></term>
+ <listitem>
+ <para>The '$' character itself.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>The count of characters to be substituted may be limited
+ by specifying the format length value. For example, '%3s{file}'
+ will only insert the first three characters of the sysfs
+ attribute</para>
+ </refsect2>
+ </refsect1>
+
+ <refsect1><title>AUTHOR</title>
+ <para>Written by Jaroslav Kysela <email>perex@perex.cz</email></para>
+ <para>Some portions are written by Greg Kroah-Hartman <email>greg@kroah.com</email> and
+ Kay Sievers <email>kay.sievers@vrfy.org</email>.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>SEE ALSO</title>
+ <para><citerefentry>
+ <refentrytitle>alsactl</refentrytitle><manvolnum>1</manvolnum>
+ </citerefentry></para>
+ </refsect1>
+ </refentry>
+ </section>
+</article>
diff --git a/alsactl/daemon.c b/alsactl/daemon.c
new file mode 100644
index 0000000..127701e
--- /dev/null
+++ b/alsactl/daemon.c
@@ -0,0 +1,458 @@
+/*
+ * Advanced Linux Sound Architecture Control Program
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "aconfig.h"
+#include "version.h"
+#include <getopt.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include <time.h>
+#include <poll.h>
+#include <alsa/asoundlib.h>
+#include "alsactl.h"
+
+struct id_list {
+ snd_ctl_elem_id_t **list;
+ int size;
+};
+
+struct card {
+ int index;
+ int pfds;
+ snd_ctl_t *handle;
+ struct id_list whitelist;
+ struct id_list blacklist;
+};
+
+static int quit = 0;
+static int rescan = 0;
+static int save_now = 0;
+
+static void signal_handler_quit(int sig)
+{
+ quit = 1;
+ signal(sig, signal_handler_quit);
+}
+
+static void signal_handler_save_and_quit(int sig)
+{
+ quit = save_now = 1;
+ signal(sig, signal_handler_quit);
+}
+
+static void signal_handler_rescan(int sig)
+{
+ rescan = 1;
+ signal(sig, signal_handler_rescan);
+}
+
+static void free_list(struct id_list *list)
+{
+ int i;
+
+ for (i = 0; i < list->size; i++)
+ free(list->list[i]);
+ free(list->list);
+}
+
+static void card_free(struct card **card)
+{
+ struct card *c = *card;
+
+ free_list(&c->blacklist);
+ free_list(&c->whitelist);
+ if (c->handle)
+ snd_ctl_close(c->handle);
+ free(c);
+ *card = NULL;
+}
+
+static void add_card(struct card ***cards, int *count, const char *cardname)
+{
+ struct card *card, **cc;
+ int i, index, findex;
+ char device[16];
+
+ index = snd_card_get_index(cardname);
+ if (index < 0)
+ return;
+ for (i = 0, findex = -1; i < *count; i++) {
+ if ((*cards)[i] == NULL) {
+ findex = i;
+ } else {
+ if ((*cards)[i]->index == index)
+ return;
+ }
+ }
+ card = calloc(1, sizeof(*card));
+ if (card == NULL)
+ return;
+ card->index = index;
+ sprintf(device, "hw:%i", index);
+ if (snd_ctl_open(&card->handle, device, SND_CTL_READONLY|SND_CTL_NONBLOCK) < 0) {
+ card_free(&card);
+ return;
+ }
+ card->pfds = snd_ctl_poll_descriptors_count(card->handle);
+ if (card->pfds < 0) {
+ card_free(&card);
+ return;
+ }
+ if (snd_ctl_subscribe_events(card->handle, 1) < 0) {
+ card_free(&card);
+ return;
+ }
+ if (findex >= 0) {
+ (*cards)[findex] = card;
+ } else {
+ cc = realloc(*cards, sizeof(void *) * (*count + 1));
+ if (cc == NULL) {
+ card_free(&card);
+ return;
+ }
+ cc[*count] = card;
+ *count = *count + 1;
+ *cards = cc;
+ }
+}
+
+static void add_cards(struct card ***cards, int *count)
+{
+ int card = -1;
+ char cardname[16];
+
+ while (1) {
+ if (snd_card_next(&card) < 0)
+ break;
+ if (card < 0)
+ break;
+ if (card >= 0) {
+ sprintf(cardname, "%i", card);
+ add_card(cards, count, cardname);
+ }
+ }
+}
+
+static int compare_ids(snd_ctl_elem_id_t *id1, snd_ctl_elem_id_t *id2)
+{
+ if (id1 == NULL || id2 == NULL)
+ return 0;
+ return snd_ctl_elem_id_get_interface(id1) == snd_ctl_elem_id_get_interface(id2) &&
+ snd_ctl_elem_id_get_index(id1) == snd_ctl_elem_id_get_index(id2) &&
+ strcmp(snd_ctl_elem_id_get_name(id1), snd_ctl_elem_id_get_name(id2)) == 0 &&
+ snd_ctl_elem_id_get_device(id1) == snd_ctl_elem_id_get_device(id2) &&
+ snd_ctl_elem_id_get_subdevice(id1) == snd_ctl_elem_id_get_subdevice(id2);
+}
+
+static int in_list(struct id_list *list, snd_ctl_elem_id_t *id)
+{
+ int i;
+ snd_ctl_elem_id_t *id1;
+
+ for (i = 0; i < list->size; i++) {
+ id1 = list->list[i];
+ if (id1 == NULL)
+ continue;
+ if (compare_ids(id, id1))
+ return 1;
+ }
+ return 0;
+}
+
+static void remove_from_list(struct id_list *list, snd_ctl_elem_id_t *id)
+{
+ int i;
+
+ for (i = 0; i < list->size; i++) {
+ if (compare_ids(id, list->list[i])) {
+ free(list->list[i]);
+ list->list[i] = NULL;
+ }
+ }
+}
+
+static void add_to_list(struct id_list *list, snd_ctl_elem_id_t *id)
+{
+ snd_ctl_elem_id_t *id1;
+ snd_ctl_elem_id_t **n;
+ int i;
+
+ if (snd_ctl_elem_id_malloc(&id1))
+ return;
+ snd_ctl_elem_id_copy(id1, id);
+ for (i = 0; i < list->size; i++) {
+ if (list->list[i] == NULL) {
+ list->list[i] = id1;
+ return;
+ }
+ }
+ n = realloc(list->list, sizeof(void *) * (list->size + 1));
+ if (n == NULL)
+ return;
+ n[list->size] = id1;
+ list->size++;
+ list->list = n;
+}
+
+static int check_lists(struct card *card, snd_ctl_elem_id_t *id)
+{
+ snd_ctl_elem_info_t *info;
+ snd_ctl_elem_info_alloca(&info);
+
+ if (in_list(&card->blacklist, id))
+ return 0;
+ if (in_list(&card->whitelist, id))
+ return 1;
+ snd_ctl_elem_info_set_id(info, id);
+ if (snd_ctl_elem_info(card->handle, info) < 0)
+ return 0;
+ if (snd_ctl_elem_info_is_writable(info) ||
+ snd_ctl_elem_info_is_tlv_writable(info)) {
+ add_to_list(&card->whitelist, id);
+ return 1;
+ } else {
+ add_to_list(&card->blacklist, id);
+ return 0;
+ }
+}
+
+static int card_events(struct card *card)
+{
+ int res = 0;
+ snd_ctl_event_t *ev;
+ snd_ctl_event_type_t type;
+ unsigned int mask;
+ snd_ctl_elem_id_t *id;
+ snd_ctl_event_alloca(&ev);
+ snd_ctl_elem_id_alloca(&id);
+
+ while (snd_ctl_read(card->handle, ev) == 1) {
+ type = snd_ctl_event_get_type(ev);
+ if (type != SND_CTL_EVENT_ELEM)
+ continue;
+ mask = snd_ctl_event_elem_get_mask(ev);
+ snd_ctl_event_elem_get_id(ev, id);
+ if (mask == SND_CTL_EVENT_MASK_REMOVE) {
+ remove_from_list(&card->whitelist, id);
+ remove_from_list(&card->blacklist, id);
+ continue;
+ }
+ if (mask & SND_CTL_EVENT_MASK_INFO) {
+ remove_from_list(&card->whitelist, id);
+ remove_from_list(&card->blacklist, id);
+ }
+ if (mask & (SND_CTL_EVENT_MASK_VALUE|
+ SND_CTL_EVENT_MASK_ADD|
+ SND_CTL_EVENT_MASK_TLV)) {
+ if (check_lists(card, id))
+ res = 1;
+ }
+ }
+ return res;
+}
+
+static long read_pid_file(const char *pidfile)
+{
+ int fd, err;
+ char pid_txt[12];
+
+ fd = open(pidfile, O_RDONLY);
+ if (fd >= 0) {
+ err = read(fd, pid_txt, 11);
+ if (err != 11)
+ err = err < 0 ? -errno : -EIO;
+ close(fd);
+ pid_txt[11] = '\0';
+ return atol(pid_txt);
+ } else {
+ return -errno;
+ }
+}
+
+static int write_pid_file(const char *pidfile)
+{
+ int fd, err;
+ char pid_txt[12];
+
+ sprintf(pid_txt, "%10li\n", (long)getpid());
+ fd = open(pidfile, O_WRONLY|O_CREAT|O_EXCL, 0600);
+ if (fd >= 0) {
+ err = write(fd, pid_txt, 11);
+ if (err != 11) {
+ err = err < 0 ? -errno : -EIO;
+ unlink(pidfile);
+ } else {
+ err = 0;
+ }
+ close(fd);
+ } else {
+ err = -errno;
+ }
+ return err;
+}
+
+int state_daemon_kill(const char *pidfile, const char *cmd)
+{
+ long pid;
+ int sig = SIGHUP;
+
+ if (cmd == NULL) {
+ error("Specify kill command (quit, rescan or save_and_quit)");
+ return -EINVAL;
+ }
+ if (strcmp(cmd, "rescan") == 0)
+ sig = SIGUSR1;
+ else if (strcmp(cmd, "save_and_quit") == 0)
+ sig = SIGUSR2;
+ else if (strcmp(cmd, "quit") == 0)
+ sig = SIGTERM;
+ if (sig == SIGHUP) {
+ error("Unknown kill command '%s'", cmd);
+ return -EINVAL;
+ }
+ pid = read_pid_file(pidfile);
+ if (pid > 0) {
+ if (kill(pid, sig) >= 0)
+ return 0;
+ return -errno;
+ }
+ return 0;
+}
+
+static int check_another_instance(const char *pidfile)
+{
+ long pid;
+
+ pid = read_pid_file(pidfile);
+ if (pid >= 0) {
+ /* invoke new card rescan */
+ if (kill(pid, SIGUSR1) >= 0) {
+ usleep(1000);
+ pid = read_pid_file(pidfile);
+ if (pid >= 0)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+int state_daemon(const char *file, const char *cardname, int period,
+ const char *pidfile)
+{
+ int count = 0, pcount, psize = 0, i, j, k, changed = 0;
+ time_t last_write, now;
+ unsigned short revents;
+ struct card **cards = NULL;
+ struct pollfd *pfd = NULL, *pfdn;
+
+ if (check_another_instance(pidfile))
+ return 0;
+ rescan = 1;
+ signal(SIGABRT, signal_handler_quit);
+ signal(SIGTERM, signal_handler_quit);
+ signal(SIGINT, signal_handler_quit);
+ signal(SIGUSR1, signal_handler_rescan);
+ signal(SIGUSR2, signal_handler_save_and_quit);
+ write_pid_file(pidfile);
+ time(&last_write);
+ while (!quit || save_now) {
+ if (save_now)
+ goto save;
+ if (rescan) {
+ if (cardname) {
+ add_card(&cards, &count, cardname);
+ } else {
+ add_cards(&cards, &count);
+ }
+ snd_config_update_free_global();
+ rescan = 0;
+ }
+ for (i = pcount = 0; i < count; i++) {
+ if (cards[i] == NULL)
+ continue;
+ pcount += cards[i]->pfds;
+ }
+ if (pcount > psize) {
+ pfdn = realloc(pfd, sizeof(struct pollfd) * pcount);
+ if (pfdn) {
+ psize = pcount;
+ pfd = pfdn;
+ } else {
+ error("No enough memory...");
+ goto out;
+ }
+ }
+ for (i = j = 0; i < count; i++) {
+ if (cards[i] == NULL)
+ continue;
+ k = snd_ctl_poll_descriptors(cards[i]->handle, pfd + j, pcount - j);
+ if (k != cards[i]->pfds) {
+ error("poll prepare failed: %i", k);
+ goto out;
+ }
+ j += k;
+ }
+ i = poll(pfd, j, (period / 2) * 1000);
+ if (i < 0 && errno == EINTR)
+ continue;
+ if (i < 0) {
+ error("poll failed: %s", strerror(errno));
+ break;
+ }
+ time(&now);
+ for (i = j = 0; i < count; i++) {
+ if (cards[i] == NULL)
+ continue;
+ k = snd_ctl_poll_descriptors_revents(cards[i]->handle,
+ pfd + j, cards[i]->pfds, &revents);
+ if (k < 0) {
+ error("poll post failed: %i\n", k);
+ goto out;
+ }
+ j += cards[i]->pfds;
+ if (revents & (POLLERR|POLLNVAL)) {
+ card_free(&cards[i]);
+ } else if (revents & POLLIN) {
+ if (card_events(cards[i])) {
+ /* delay the write */
+ if (!changed)
+ last_write = now;
+ changed = 1;
+ }
+ }
+ }
+ if ((now - last_write >= period && changed) || save_now) {
+save:
+ changed = save_now = 0;
+ save_state(file, cardname);
+ }
+ }
+out:
+ free(pfd);
+ remove(pidfile);
+ for (i = 0; i < count; i++)
+ card_free(&cards[i]);
+ free(cards);
+ return 0;
+}
diff --git a/alsactl/init/00main b/alsactl/init/00main
new file mode 100644
index 0000000..660df38
--- /dev/null
+++ b/alsactl/init/00main
@@ -0,0 +1,49 @@
+# This is toplevel configuration for for 'alsactl init'.
+# See 'man alsactl_init' for syntax.
+
+# set root device directory in sysfs for soundcard for ATTR{} command
+CONFIG{sysfs_device}="/class/sound/card$cardinfo{card}/device"
+ACCESS!="$sysfsroot$config{sysfs_device}", \
+ CONFIG{sysfs_device}="/class/sound/controlC$cardinfo{card}/device"
+
+# test for extra commands
+ENV{CMD}=="help", INCLUDE="help", GOTO="00main_end"
+ENV{CMD}=="info", INCLUDE="info", GOTO="00main_end"
+ENV{CMD}=="default", INCLUDE="default", GOTO="00main_end"
+ENV{CMD}=="test", INCLUDE="test", GOTO="00main_end"
+ENV{CMD}=="*", ERROR="Unknown command '$env{CMD}'\n", GOTO="00main_end"
+
+# include files with real configuration
+#
+# steps are:
+# 1) look for preinit subdirectory and parse all files in it
+# 2) if RESULT=="skip", skip ALSA standard configuration files
+# 3) do ALSA standard configuration
+# 4) look for postinit subdirectory and parse all files in it
+# 5) if RESULT!="true", initialize hardware using a guess method,
+# print an error message and return with exit code 99
+# 6) return with exit code 0 (success)
+#
+
+RESULT="unknown"
+ACCESS=="preinit", INCLUDE="preinit"
+RESULT=="skip", GOTO="init_end"
+
+# real ALSA configuration database
+CARDINFO{driver}=="HDA-Intel", INCLUDE="hda", GOTO="init_end"
+CARDINFO{driver}=="CA0106", INCLUDE="ca0106", GOTO="init_end"
+CARDINFO{driver}=="Test", INCLUDE="test", GOTO="init_end"
+
+LABEL="init_end"
+ACCESS=="postinit", INCLUDE="postinit"
+RESULT=="true", GOTO="00_mainend"
+ERROR="Found hardware: \"$cardinfo{driver}\" \"$cardinfo{mixername}\" \"$cardinfo{components}\" \"$attr{subsystem_vendor}\" \"$attr{subsystem_device}\"\n"
+ERROR="Hardware is initialized using a generic method\n"
+INCLUDE="default"
+EXIT="99"
+
+#
+# label identifying end of main file
+#
+
+LABEL="00main_end"
diff --git a/alsactl/init/Makefile.am b/alsactl/init/Makefile.am
new file mode 100644
index 0000000..64dac41
--- /dev/null
+++ b/alsactl/init/Makefile.am
@@ -0,0 +1,7 @@
+
+init_files = \
+ 00main default help info test \
+ hda ca0106
+EXTRA_DIST = $(init_files)
+alsainitdir = $(datadir)/alsa/init
+alsainit_DATA = $(init_files)
diff --git a/alsactl/init/Makefile.in b/alsactl/init/Makefile.in
new file mode 100644
index 0000000..7488c2a
--- /dev/null
+++ b/alsactl/init/Makefile.in
@@ -0,0 +1,464 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = alsactl/init
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(alsainitdir)"
+DATA = $(alsainit_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+init_files = \
+ 00main default help info test \
+ hda ca0106
+
+EXTRA_DIST = $(init_files)
+alsainitdir = $(datadir)/alsa/init
+alsainit_DATA = $(init_files)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsactl/init/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign alsactl/init/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-alsainitDATA: $(alsainit_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(alsainit_DATA)'; test -n "$(alsainitdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(alsainitdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(alsainitdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(alsainitdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(alsainitdir)" || exit $$?; \
+ done
+
+uninstall-alsainitDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(alsainit_DATA)'; test -n "$(alsainitdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(alsainitdir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(alsainitdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-alsainitDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-alsainitDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-alsainitDATA install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am uninstall uninstall-alsainitDATA uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/alsactl/init/ca0106 b/alsactl/init/ca0106
new file mode 100644
index 0000000..7afd4df
--- /dev/null
+++ b/alsactl/init/ca0106
@@ -0,0 +1,31 @@
+# Configuration for CA0106 driver
+
+CTL{reset}="mixer"
+CTL{name}="Master Playback Volume", CTL{value}="-20dB"
+CTL{name}="Master Playback Switch", CTL{value}="on"
+CTL{name}="Analog Front Playback Volume", CTL{value}="0dB"
+CTL{name}="Analog Front Playback Switch", CTL{value}="on"
+CTL{name}="Analog Rear Playback Volume", CTL{value}="0dB"
+CTL{name}="Analog Rear Playback Switch", CTL{value}="on"
+CTL{name}="Analog Center/LFE Playback Volume", CTL{value}="0dB"
+CTL{name}="Analog Center/LFE Playback Switch", CTL{value}="on"
+CTL{name}="Analog Side Playback Volume", CTL{value}="0dB"
+CTL{name}="Analog Side Playback Switch", CTL{value}="on"
+CTL{name}="IEC958 Front Playback Volume", CTL{value}="0dB"
+CTL{name}="IEC958 Rear Playback Volume", CTL{value}="0dB"
+CTL{name}="IEC958 Center/LFE Playback Volume", CTL{value}="0dB"
+# capture
+CTL{name}="Analog Source Capture Enum", CTL{value}="Mic"
+CTL{name}="Mic Capture Volume", CTL{value}="6dB"
+CTL{name}="Shared Mic/Line in Capture Switch", CTL{value}="Mic in"
+
+# some variants have also AC97 mixer
+
+CTL{reset}="mixer"
+CTL{name}="AC97 Line Capture Volume",PROGRAM!="__ctl_search",GOTO="ac97_end"
+CTL{name}="Analog Source Capture Enum", CTL{value}="AC97 in"
+CTL{name}="AC97 Mic Capture Switch", "on"
+CTL{name}="AC97 Mic Capture Value", "6dB"
+LABEL="ac97_end"
+
+RESULT="true", EXIT="return"
diff --git a/alsactl/init/default b/alsactl/init/default
new file mode 100644
index 0000000..5fb0113
--- /dev/null
+++ b/alsactl/init/default
@@ -0,0 +1,274 @@
+#
+# Default ALSA volume levels and setting when initialization database fails.
+#
+# Basic rules are:
+# - keep volumes at minimal level, but sound should be hearable
+# - enable just main speakers for playback and main microphone for recording
+#
+
+# **************************************************************************
+# playback
+# **************************************************************************
+
+ENV{ppercent}:="75%"
+ENV{cpercent}:="75%"
+ENV{pvolume}:="-20dB"
+ENV{cvolume}:="12dB"
+ENV{has_pmaster_vol}:="false"
+
+CTL{reset}="mixer"
+CTL{name}="Playback Volume",CTL{do_search}=="1", \
+ CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+CTL{name}="Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Master Playback Volume",CTL{do_search}=="1", \
+ ENV{has_pmaster_vol}:="true", \
+ CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+CTL{name}="Master Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Master Front Playback Volume",CTL{do_search}=="1", \
+ ENV{has_pmaster_vol}:="true", \
+ CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+CTL{name}="Master Front Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Master Digital Playback Volume",CTL{do_search}=="1", \
+ CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+CTL{name}="Master Digital Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Front Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn front volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Front Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Surround Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn front volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Surround Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Center Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn front volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Center Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="LFE Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn front volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="LFE Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Headphone Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn headphone volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Headphone Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Headphone Playback Volume",CTL{index}="1",PROGRAM!="__ctl_search",\
+ GOTO=""
+# if master volume control is present, turn headphone volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Headphone Playback Switch",CTL{index}="1",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Speaker Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn speaker volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Speaker Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Front Speaker Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn speaker volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Front Speaker Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Surround Speaker Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn speaker volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Surround Speaker Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Center Speaker Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn speaker volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="Center Speaker Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="LFE Speaker Playback Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn speaker volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+LABEL=""
+CTL{name}="LFE Speaker Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="PC Speaker Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="$env{pvolume}",RESULT!="0",CTL{values}="$env{ppercent}"
+CTL{name}="PC Speaker Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="PCM Playback Volume",PROGRAM!="__ctl_search", \
+ CTL{name}="PCM Volume",PROGRAM!="__ctl_search", GOTO=""
+# if master volume control is present, turn PCM volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+# exception - some HDA codecs have shifted dB range
+CTL{dBmin}=="-34.50dB",CTL{dBmax}=="12.00dB",CTL{write}=="0dB",GOTO=""
+CTL{dBmin}=="-30.00dB",CTL{dBmax}=="0dB",CTL{write}=="0dB",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="75%"
+LABEL=""
+CTL{name}="PCM Playback Switch",CTL{do_search}=="1", CTL{values}="on"
+CTL{name}="PCM Switch",CTL{do_search}=="1",CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="PCM Playback Volume",CTL{index}="1",PROGRAM!="__ctl_search", \
+ CTL{name}="PCM Volume",PROGRAM!="__ctl_search",GOTO=""
+# if master volume control is present, turn PCM volume to max
+ENV{has_pmaster_vol}=="true",CTL{write}=="0dB",GOTO=""
+ENV{has_pmaster_vol}=="true",CTL{write}=="100%",GOTO=""
+# exception - some HDA codecs have shifted dB range
+CTL{dBmin}=="-34.50dB",CTL{dBmax}=="12.00dB",CTL{write}=="0dB",GOTO=""
+CTL{dBmin}=="-30.00dB",CTL{dBmax}=="0dB",CTL{write}=="0dB",GOTO=""
+CTL{write}!="$env{pvolume}",CTL{values}="75%"
+LABEL=""
+CTL{name}="PCM Playback Switch",CTL{index}="1",CTL{do_search}=="1", \
+ CTL{values}="on"
+CTL{name}="PCM Switch",CTL{index}="1",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="DAC Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="$env{pvolume}",RESULT!="0",CTL{values}="$env{ppercent}"
+CTL{name}="DAC Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Synth Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="$env{pvolume}",RESULT!="0",CTL{values}="$env{ppercent}"
+CTL{name}="Synth Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Wave Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="100%"
+CTL{name}="Wave Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Music Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="100%"
+CTL{name}="Music Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="CD Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="0%"
+CTL{name}="CD Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="off"
+
+CTL{reset}="mixer"
+CTL{name}="Mono Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="$env{pvolume}",RESULT!="0",CTL{values}="$env{ppercent}"
+CTL{name}="Mono Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="Master Mono Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="$env{pvolume}",RESULT!="0",CTL{values}="$env{ppercent}"
+CTL{name}="Master Mono Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{reset}="mixer"
+CTL{name}="AC97 Playback Volume",CTL{do_search}=="1", \
+ CTL{values}="100%"
+CTL{name}="AC97 Playback Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+#
+# Powermacs
+#
+
+CTL{reset}="mixer"
+CTL{name}="DRC Range",CTL{do_search}=="1", \
+ CTL{write}!="$env{pvolume}",CTL{values}="$env{ppercent}"
+
+# **************************************************************************
+# capture
+# **************************************************************************
+
+CTL{reset}="mixer"
+CTL{name}="Capture Volume",CTL{do_search}=="1", \
+ CTL{write}!="$env{cvolume}",CTL{values}="$env{cpercent}"
+CTL{name}="Capture Switch",CTL{do_search}=="1", \
+ CTL{values}="on"
+
+CTL{name}="Capture Source",PROGRAM!="__ctl_search", GOTO=""
+CTL{enums}=="*|Internal Mic|*",CTL{values}="Internal Mic", GOTO=""
+CTL{enums}=="*|Mic|*",CTL{values}="Mic"
+LABEL=""
+
+CTL{name}="Input Source",PROGRAM!="__ctl_search", GOTO=""
+CTL{enums}=="*|Internal Mic|*",CTL{values}="Internal Mic", GOTO=""
+CTL{enums}=="*|Mic|*",CTL{values}="Mic"
+LABEL=""
+
+CTL{name}="Digital Input Source",PROGRAM!="__ctl_search", GOTO=""
+CTL{enums}=="*|Digital Mic 1|*",CTL{values}="Digital Mic 1", GOTO=""
+CTL{enums}=="*|Mic|*",CTL{values}="Mic"
+LABEL=""
+
+CTL{name}="Mic Boost",CTL{do_search}=="1", CTL{values}="on"
+CTL{name}="Internal Mic Boost",CTL{do_search}=="1", CTL{values}="on"
diff --git a/alsactl/init/hda b/alsactl/init/hda
new file mode 100644
index 0000000..a6919f1
--- /dev/null
+++ b/alsactl/init/hda
@@ -0,0 +1,39 @@
+# Configuration for HDA Intel driver (High Definition Audio - Azalia)
+
+CARDINFO{mixername}=="Realtek ALC880", \
+ ATTR{subsystem_vendor}=="0x1025", ATTR{subsystem_device}=="0x0070", \
+ GOTO="Acer Travelmate 8100"
+CARDINFO{mixername}=="Analog Devices AD1984", \
+ ATTR{subsystem_vendor}=="0x17aa", ATTR{subsystem_device}=="0x20ac", \
+ GOTO="Lenovo T61"
+RESULT="false", EXIT="return"
+
+LABEL="Acer Travelmate 8100"
+# playback
+CTL{reset}="mixer"
+CTL{name}="Master Playback Volume", CTL{value}="-21dB"
+CTL{name}="Master Playback Switch", CTL{value}="on"
+CTL{name}="Headphone Playback Switch", CTL{value}="on,on"
+CTL{name}="Front Playback Volume", CTL{value}="-29dB,-29dB"
+CTL{name}="Front Playback Switch", CTL{value}="on,on"
+CTL{name}="PCM Playback Volume", CTL{value}="0dB,0dB"
+# capture
+CTL{name}="Input Source", CTL{value}="Mic"
+CTL{name}="Capture Volume", CTL{value}="20dB,20dB"
+CTL{name}="Capture Switch", CTL{value}="on,on"
+RESULT="true", EXIT="return"
+
+LABEL="Lenovo T61"
+# playback
+CTL{reset}="mixer"
+CTL{name}="Master Playback Volume", CTL{value}="-13.5dB"
+CTL{name}="Master Playback Switch", CTL{value}="on"
+CTL{name}="Headphone Playback Switch", CTL{value}="on,on"
+CTL{name}="Speaker Playback Switch", CTL{value}="on,on"
+CTL{name}="PCM Playback Volume", CTL{value}="0dB,0dB"
+# capture
+CTL{name}="Input Source", CTL{value}="Internal Mic"
+CTL{name}="Internal Mic Boost", CTL{value}="1"
+CTL{name}="Capture Volume", CTL{value}="9dB,9dB"
+CTL{name}="Capture Switch", CTL{value}="on,on"
+RESULT="true", EXIT="return"
diff --git a/alsactl/init/help b/alsactl/init/help
new file mode 100644
index 0000000..4f0ba70
--- /dev/null
+++ b/alsactl/init/help
@@ -0,0 +1,8 @@
+# help page
+
+PRINT="Available commands (identified by the environment variable CMD):\n\n"
+PRINT=" (not set) Do a soundcard initialization\n"
+PRINT=" default Do a default (guess method) initialization\n"
+PRINT=" help Show this information\n"
+PRINT=" info Print all available hardware identification\n"
+PRINT=" test Do alsactl utility parser tests\n"
diff --git a/alsactl/init/info b/alsactl/init/info
new file mode 100644
index 0000000..a4fea19
--- /dev/null
+++ b/alsactl/init/info
@@ -0,0 +1,22 @@
+# show information about card
+
+PRINT="CARDINFO:\n"
+PRINT=" CARDINFO{id}=\"$CARDINFO{id}\"\n"
+PRINT=" CARDINFO{card}=\"$CARDINFO{card}\"\n"
+PRINT=" CARDINFO{driver}=\"$CARDINFO{driver}\"\n"
+PRINT=" CARDINFO{name}=\"$CARDINFO{name}\"\n"
+PRINT=" CARDINFO{longname}=\"$CARDINFO{longname}\"\n"
+PRINT=" CARDINFO{mixername}=\"$CARDINFO{mixername}\"\n"
+PRINT=" CARDINFO{components}=\"$CARDINFO{components}\"\n"
+
+# sysfs stuff
+PRINT="sysfs:\n"
+ATTR{bus}=="*", PRINT=" ATTR{bus}=\"$ATTR{bus}\"\n"
+ATTR{class}=="*", PRINT=" ATTR{class}=\"$ATTR{class}\"\n"
+ATTR{driver}=="*", PRINT=" ATTR{driver}=\"$ATTR{driver}\"\n"
+ATTR{vendor}=="*", PRINT=" ATTR{vendor}=\"$ATTR{vendor}\"\n"
+ATTR{device}=="*", PRINT=" ATTR{device}=\"$ATTR{device}\"\n"
+ATTR{subsystem_vendor}=="*", \
+ PRINT=" ATTR{subsystem_vendor}=\"$ATTR{subsystem_vendor}\"\n"
+ATTR{subsystem_device}=="*", \
+ PRINT=" ATTR{subsystem_device}=\"$ATTR{subsystem_device}\"\n"
diff --git a/alsactl/init/test b/alsactl/init/test
new file mode 100644
index 0000000..56659f8
--- /dev/null
+++ b/alsactl/init/test
@@ -0,0 +1,270 @@
+# Test code
+# Just for debugging purposes
+
+PRINT="Default CTL:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+
+CTL{reset}="mixer"
+
+PRINT="After CTL{reset}=\"mixer\":\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+
+CTL{numid}="987"
+CTL{iface}="sequencer"
+CTL{device}="10"
+CTL{subdevice}="20"
+CTL{name}="Just Test"
+CTL{index}="999"
+
+PRINT="After test sequence:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+
+ERROR="Ignore following error:\n "
+PROGRAM="__just_test"
+
+PRINT="CTL{do_count} test:\n"
+CTL{search}="mixer", CTL{name}="*Switch*", \
+ PRINT=" *Switch* count result: $ctl{do_count}\n"
+
+PRINT="__ctl_search test:\n"
+CTL{search}="mixer", CTL{name}="*Switch*", PROGRAM!="__ctl_search", GOTO="skip_switch_search"
+PRINT=" *Switch 0* search result: $result\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+CTL{search}="mixer", CTL{name}="*Switch*", PROGRAM!="__ctl_search 1", GOTO="skip_switch_search"
+PRINT=" *Switch 1* search result: $result\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+
+PRINT="First ten elements:\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 0}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #0:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 1}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #1:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 2}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #2:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 3}!="3", GOTO="skip_first_ten_search"
+PRINT=" Element #3:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 4}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #4:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 5}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #5:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 6}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #6:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 7}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #7:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 8}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #8:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+CTL{search}="mixer", CTL{name}="*", CTL{do_search 9}!="1", GOTO="skip_first_ten_search"
+PRINT=" Element #9:\n"
+PRINT=" CTL{numid}=\"$ctl{numid}\"\n"
+PRINT=" CTL{iface}=\"$ctl{iface}\"\n"
+PRINT=" CTL{device}=\"$ctl{device}\"\n"
+PRINT=" CTL{subdevice}=\"$ctl{subdevice}\"\n"
+PRINT=" CTL{name}=\"$ctl{name}\"\n"
+PRINT=" CTL{index}=\"$ctl{index}\"\n"
+PRINT=" CTL{type}=\"$ctl{type}\"\n"
+PRINT=" CTL{attr}=\"$ctl{attr}\"\n"
+PRINT=" CTL{owner}=\"$ctl{owner}\"\n"
+PRINT=" CTL{count}=\"$ctl{count}\"\n"
+PRINT=" CTL{min}=\"$ctl{min}\"\n"
+PRINT=" CTL{max}=\"$ctl{max}\"\n"
+PRINT=" CTL{step}=\"$ctl{step}\"\n"
+PRINT=" CTL{dBmin}=\"$ctl{dBmin}\"\n"
+PRINT=" CTL{dBmax}=\"$ctl{dBmax}\"\n"
+PRINT=" CTL{items}=\"$ctl{items}\"\n"
+PRINT=" CTL{value}=\"$ctl{value}\"\n"
+LABEL="skip_first_ten_search"
+
+PRINT="Elements write test #1:\n", \
+ CTL{search}="mixer", CTL{name}="Front Playback Switch", \
+ CTL{do_search}=="1", CTL{value}="on,on", \
+ PRINT=" result=$result\n"
+PRINT="Elements write test #2:\n", \
+ CTL{search}="mixer", CTL{name}="Front Playback Volume", \
+ CTL{do_search}=="1", CTL{value}="32,32", \
+ PRINT=" result=$result\n"
+PRINT="Elements write test #3:\n", \
+ CTL{search}="mixer", CTL{name}="Front Playback Volume Error", \
+ CTL{do_search}=="1", \
+PRINT=" result=$result\n"
+
+#CTL{reset}="mixer", CTL{name}="Input Source", PRINT="***$ctl{enums}\n"
+
+PRINT="\nAll tests done..\n"
diff --git a/alsactl/init_parse.c b/alsactl/init_parse.c
new file mode 100644
index 0000000..8a7173b
--- /dev/null
+++ b/alsactl/init_parse.c
@@ -0,0 +1,1792 @@
+/*
+ * Advanced Linux Sound Architecture Control Program - Parse initialization files
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ * Greg Kroah-Hartman <greg@kroah.com>,
+ * Kay Sievers <kay.sievers@vrfy.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <string.h>
+#include <fcntl.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fnmatch.h>
+#include <sys/stat.h>
+#include <sys/un.h>
+#include <sys/wait.h>
+#include <sys/select.h>
+#include <sys/types.h>
+#include <dirent.h>
+#include <math.h>
+#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "alsactl.h"
+#include "list.h"
+
+#define PATH_SIZE 512
+#define NAME_SIZE 128
+#define EJUSTRETURN 0x7fffffff
+
+enum key_op {
+ KEY_OP_UNSET,
+ KEY_OP_MATCH,
+ KEY_OP_NOMATCH,
+ KEY_OP_ADD,
+ KEY_OP_ASSIGN,
+ KEY_OP_ASSIGN_FINAL
+};
+
+struct pair {
+ char *key;
+ char *value;
+ struct pair *next;
+};
+
+struct space {
+ struct pair *pairs;
+ char *rootdir;
+ char *go_to;
+ char *program_result;
+ const char *filename;
+ int linenum;
+ int log_run;
+ int exit_code;
+ int quit;
+ unsigned int ctl_id_changed;
+ snd_hctl_t *ctl_handle;
+ snd_ctl_card_info_t *ctl_card_info;
+ snd_ctl_elem_id_t *ctl_id;
+ snd_ctl_elem_info_t *ctl_info;
+ snd_ctl_elem_value_t *ctl_value;
+};
+
+static void Perror(struct space *space, const char *fmt, ...)
+{
+ va_list arg;
+ va_start(arg, fmt);
+ fprintf(stderr, "%s:%i: ", space->filename, space->linenum);
+ vfprintf(stderr, fmt, arg);
+ putc('\n', stderr);
+ va_end(arg);
+}
+
+#include "init_sysdeps.c"
+#include "init_utils_string.c"
+#include "init_utils_run.c"
+#include "init_sysfs.c"
+
+static void free_space(struct space *space)
+{
+ struct pair *pair = space->pairs;
+ struct pair *next = pair;
+
+ while (next) {
+ pair = next;
+ next = pair->next;
+ free(pair->value);
+ free(pair->key);
+ free(pair);
+ }
+ space->pairs = NULL;
+ if (space->ctl_value) {
+ snd_ctl_elem_value_free(space->ctl_value);
+ space->ctl_value = NULL;
+ }
+ if (space->ctl_info) {
+ snd_ctl_elem_info_free(space->ctl_info);
+ space->ctl_info = NULL;
+ }
+ if (space->ctl_id) {
+ snd_ctl_elem_id_free(space->ctl_id);
+ space->ctl_id = NULL;
+ }
+ if (space->ctl_card_info) {
+ snd_ctl_card_info_free(space->ctl_card_info);
+ space->ctl_card_info = NULL;
+ }
+ if (space->ctl_handle) {
+ snd_hctl_close(space->ctl_handle);
+ space->ctl_handle = NULL;
+ }
+ if (space->rootdir)
+ free(space->rootdir);
+ if (space->program_result)
+ free(space->program_result);
+ if (space->go_to)
+ free(space->go_to);
+ free(space);
+}
+
+static struct pair *value_find(struct space *space, const char *key)
+{
+ struct pair *pair = space->pairs;
+
+ while (pair && strcmp(pair->key, key) != 0)
+ pair = pair->next;
+ return pair;
+}
+
+static int value_set(struct space *space, const char *key, const char *value)
+{
+ struct pair *pair;
+
+ pair = value_find(space, key);
+ if (pair) {
+ free(pair->value);
+ pair->value = strdup(value);
+ if (pair->value == NULL)
+ return -ENOMEM;
+ } else {
+ pair = malloc(sizeof(struct pair));
+ if (pair == NULL)
+ return -ENOMEM;
+ pair->key = strdup(key);
+ if (pair->key == NULL) {
+ free(pair);
+ return -ENOMEM;
+ }
+ pair->value = strdup(value);
+ if (pair->value == NULL) {
+ free(pair->key);
+ free(pair);
+ return -ENOMEM;
+ }
+ pair->next = space->pairs;
+ space->pairs = pair;
+ }
+ return 0;
+}
+
+static int init_space(struct space **space, int card)
+{
+ struct space *res;
+ char device[16];
+ int err;
+
+ res = calloc(1, sizeof(struct space));
+ if (res == NULL)
+ return -ENOMEM;
+ res->ctl_id_changed = ~0;
+ res->linenum = -1;
+ sprintf(device, "hw:%u", card);
+ err = snd_hctl_open(&res->ctl_handle, device, 0);
+ if (err < 0)
+ goto error;
+ err = snd_hctl_load(res->ctl_handle);
+ if (err < 0)
+ goto error;
+ err = snd_ctl_card_info_malloc(&res->ctl_card_info);
+ if (err < 0)
+ goto error;
+ err = snd_ctl_card_info(snd_hctl_ctl(res->ctl_handle), res->ctl_card_info);
+ if (err < 0)
+ goto error;
+ err = snd_ctl_elem_id_malloc(&res->ctl_id);
+ if (err < 0)
+ goto error;
+ err = snd_ctl_elem_info_malloc(&res->ctl_info);
+ if (err < 0)
+ goto error;
+ err = snd_ctl_elem_value_malloc(&res->ctl_value);
+ if (err < 0)
+ goto error;
+ *space = res;
+ return 0;
+ error:
+ free_space(res);
+ return err;
+}
+
+static const char *cardinfo_get(struct space *space, const char *attr)
+{
+ if (strncasecmp(attr, "CARD", 4) == 0) {
+ static char res[16];
+ sprintf(res, "%u", snd_ctl_card_info_get_card(space->ctl_card_info));
+ return res;
+ }
+ if (strncasecmp(attr, "ID", 2) == 0)
+ return snd_ctl_card_info_get_id(space->ctl_card_info);
+ if (strncasecmp(attr, "DRIVER", 6) == 0)
+ return snd_ctl_card_info_get_driver(space->ctl_card_info);
+ if (strncasecmp(attr, "NAME", 4) == 0)
+ return snd_ctl_card_info_get_name(space->ctl_card_info);
+ if (strncasecmp(attr, "LONGNAME", 8) == 0)
+ return snd_ctl_card_info_get_longname(space->ctl_card_info);
+ if (strncasecmp(attr, "MIXERNAME", 9) == 0)
+ return snd_ctl_card_info_get_mixername(space->ctl_card_info);
+ if (strncasecmp(attr, "COMPONENTS", 10) == 0)
+ return snd_ctl_card_info_get_components(space->ctl_card_info);
+ Perror(space, "unknown cardinfo{} attribute '%s'", attr);
+ return NULL;
+}
+
+static int check_id_changed(struct space *space, unsigned int what)
+{
+ snd_hctl_elem_t *elem;
+ int err;
+
+ if ((space->ctl_id_changed & what & 1) != 0) {
+ snd_ctl_elem_id_set_numid(space->ctl_id, 0);
+ elem = snd_hctl_find_elem(space->ctl_handle, space->ctl_id);
+ if (!elem)
+ return -ENOENT;
+ err = snd_hctl_elem_info(elem, space->ctl_info);
+ if (err == 0)
+ space->ctl_id_changed &= ~1;
+ return err;
+ }
+ if ((space->ctl_id_changed & what & 2) != 0) {
+ snd_ctl_elem_id_set_numid(space->ctl_id, 0);
+ elem = snd_hctl_find_elem(space->ctl_handle, space->ctl_id);
+ if (!elem)
+ return -ENOENT;
+ err = snd_hctl_elem_read(elem, space->ctl_value);
+ if (err == 0)
+ space->ctl_id_changed &= ~2;
+ return err;
+ }
+ return 0;
+}
+
+static const char *get_ctl_value(struct space *space)
+{
+ snd_ctl_elem_type_t type;
+ unsigned int idx, count;
+ static char res[1024], tmp[16];
+ static const char hex[] = "0123456789abcdef";
+ char *pos;
+ const char *pos1;
+
+ type = snd_ctl_elem_info_get_type(space->ctl_info);
+ count = snd_ctl_elem_info_get_count(space->ctl_info);
+ res[0] = '\0';
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ for (idx = 0; idx < count; idx++) {
+ if (idx > 0)
+ strlcat(res, ",", sizeof(res));
+ strlcat(res, snd_ctl_elem_value_get_boolean(space->ctl_value, idx) ? "on" : "off", sizeof(res));
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ for (idx = 0; idx < count; idx++) {
+ if (idx > 0)
+ strlcat(res, ",", sizeof(res));
+ snprintf(tmp, sizeof(tmp), "%li", snd_ctl_elem_value_get_integer(space->ctl_value, idx));
+ strlcat(res, tmp, sizeof(res));
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ for (idx = 0; idx < count; idx++) {
+ if (idx > 0)
+ strlcat(res, ",", sizeof(res));
+ snprintf(tmp, sizeof(tmp), "%lli", snd_ctl_elem_value_get_integer64(space->ctl_value, idx));
+ strlcat(res, tmp, sizeof(res));
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ for (idx = 0; idx < count; idx++) {
+ if (idx > 0)
+ strlcat(res, ",", sizeof(res));
+ snprintf(tmp, sizeof(tmp), "%u", snd_ctl_elem_value_get_enumerated(space->ctl_value, idx));
+ strlcat(res, tmp, sizeof(res));
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_BYTES:
+ case SND_CTL_ELEM_TYPE_IEC958:
+ if (type == SND_CTL_ELEM_TYPE_IEC958)
+ count = sizeof(snd_aes_iec958_t);
+ if (count > (sizeof(res)-1)/2)
+ count = (sizeof(res)-1/2);
+ pos = res;
+ pos1 = snd_ctl_elem_value_get_bytes(space->ctl_value);
+ while (count > 0) {
+ idx = *pos1++;
+ *pos++ = hex[idx >> 4];
+ *pos++ = hex[idx & 0x0f];
+ count++;
+ }
+ *pos++ = '\0';
+ break;
+ default:
+ Perror(space, "unknown element type '%i'", type);
+ return NULL;
+ }
+ return res;
+}
+
+/* Function to convert from percentage to volume. val = percentage */
+#define convert_prange1(val, min, max) \
+ ceil((val) * ((max) - (min)) * 0.01 + (min))
+
+static int set_ctl_value(struct space *space, const char *value, int all)
+{
+ snd_ctl_elem_type_t type;
+ unsigned int idx, idx2, count, items;
+ const char *pos, *pos2;
+ snd_hctl_elem_t *elem;
+ int val;
+ long lval;
+
+ type = snd_ctl_elem_info_get_type(space->ctl_info);
+ count = snd_ctl_elem_info_get_count(space->ctl_info);
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ for (idx = 0; idx < count; idx++) {
+ while (*value == ' ')
+ value++;
+ if (*value == '\0')
+ goto missing;
+ val = strncasecmp(value, "true", 4) == 0 ||
+ strncasecmp(value, "yes", 3) == 0 ||
+ strncasecmp(value, "on", 2) == 0 ||
+ strncasecmp(value, "1", 1) == 0;
+ snd_ctl_elem_value_set_boolean(space->ctl_value, idx, val);
+ if (all)
+ continue;
+ pos = strchr(value, ',');
+ value = pos ? pos + 1 : value + strlen(value) - 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ for (idx = 0; idx < count; idx++) {
+ while (*value == ' ')
+ value++;
+ pos = strchr(value, ',');
+ if (pos)
+ *(char *)pos = '\0';
+ remove_trailing_chars((char *)value, ' ');
+ items = pos ? pos - value : strlen(value);
+ if (items > 1 && value[items-1] == '%') {
+ val = convert_prange1(strtol(value, NULL, 0), snd_ctl_elem_info_get_min(space->ctl_info), snd_ctl_elem_info_get_max(space->ctl_info));
+ snd_ctl_elem_value_set_integer(space->ctl_value, idx, val);
+ } else if (items > 2 && value[items-2] == 'd' && value[items-1] == 'B') {
+ val = strtol(value, NULL, 0) * 100;
+ if ((pos2 = strchr(value, '.')) != NULL) {
+ if (isdigit(*(pos2-1)) && isdigit(*(pos2-2))) {
+ if (val < 0)
+ val -= strtol(pos2 + 1, NULL, 0);
+ else
+ val += strtol(pos2 + 1, NULL, 0);
+ } else if (isdigit(*(pos2-1))) {
+ if (val < 0)
+ val -= strtol(pos2 + 1, NULL, 0) * 10;
+ else
+ val += strtol(pos2 + 1, NULL, 0) * 10;
+ }
+ }
+ val = snd_ctl_convert_from_dB(snd_hctl_ctl(space->ctl_handle), space->ctl_id, val, &lval, -1);
+ if (val < 0) {
+ dbg("unable to convert dB value '%s' to internal integer range", value);
+ return val;
+ }
+ snd_ctl_elem_value_set_integer(space->ctl_value, idx, lval);
+ } else {
+ snd_ctl_elem_value_set_integer(space->ctl_value, idx, strtol(value, NULL, 0));
+ }
+ if (all)
+ continue;
+ value = pos ? pos + 1 : value + strlen(value) - 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ for (idx = 0; idx < count; idx++) {
+ while (*value == ' ')
+ value++;
+ snd_ctl_elem_value_set_integer64(space->ctl_value, idx, strtoll(value, NULL, 0));
+ if (all)
+ continue;
+ pos = strchr(value, ',');
+ value = pos ? pos + 1 : value + strlen(value) - 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ for (idx = 0; idx < count; idx++) {
+ while (*value == ' ')
+ value++;
+ pos = strchr(value, ',');
+ if (isdigit(value[0]) || value[0] == '-') {
+ snd_ctl_elem_value_set_enumerated(space->ctl_value, idx, strtol(value, NULL, 0));
+ } else {
+ if (pos)
+ *(char *)pos = '\0';
+ remove_trailing_chars((char *)value, ' ');
+ items = snd_ctl_elem_info_get_items(space->ctl_info);
+ for (idx2 = 0; idx2 < items; idx2++) {
+ snd_ctl_elem_info_set_item(space->ctl_info, idx2);
+ elem = snd_hctl_find_elem(space->ctl_handle, space->ctl_id);
+ if (elem == NULL)
+ return -ENOENT;
+ val = snd_hctl_elem_info(elem, space->ctl_info);
+ if (val < 0)
+ return val;
+ if (strcasecmp(snd_ctl_elem_info_get_item_name(space->ctl_info), value) == 0) {
+ snd_ctl_elem_value_set_enumerated(space->ctl_value, idx, idx2);
+ break;
+ }
+ }
+ if (idx2 >= items) {
+ Perror(space, "wrong enum identifier '%s'", value);
+ return -EINVAL;
+ }
+ }
+ if (all)
+ continue;
+ value = pos ? pos + 1 : value + strlen(value) - 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_BYTES:
+ case SND_CTL_ELEM_TYPE_IEC958:
+ if (type == SND_CTL_ELEM_TYPE_IEC958)
+ count = sizeof(snd_aes_iec958_t);
+ while (*value == ' ')
+ value++;
+ if (strlen(value) != count * 2) {
+ Perror(space, "bad ctl value hexa length (should be %u bytes)", count);
+ return -EINVAL;
+ }
+ for (idx = 0; idx < count; idx += 2) {
+ val = hextodigit(*(value++)) << 4;
+ val |= hextodigit(*(value++));
+ if (val > 255) {
+ Perror(space, "bad ctl hexa value");
+ return -EINVAL;
+ }
+ snd_ctl_elem_value_set_byte(space->ctl_value, idx, val);
+ }
+ break;
+ default:
+ Perror(space, "unknown element type '%i'", type);
+ return -EINVAL;
+ }
+ return 0;
+ missing:
+ printf("%i %i\n", type, count);
+ Perror(space, "missing some ctl values (line %i)", space->linenum);
+ return -EINVAL;
+}
+
+static int do_match(const char *key, enum key_op op,
+ const char *key_value, const char *value)
+{
+ int match;
+
+ if (value == NULL)
+ return 0;
+ dbg("match %s '%s' <-> '%s'", key, key_value, value);
+ match = fnmatch(key_value, value, 0) == 0;
+ if (match && op == KEY_OP_MATCH) {
+ dbg("%s is true (matching value)", key);
+ return 1;
+ }
+ if (!match && op == KEY_OP_NOMATCH) {
+ dbg("%s is true (non-matching value)", key);
+ return 1;
+ }
+ dbg("%s is false", key);
+ return 0;
+}
+
+static int ctl_match(snd_ctl_elem_id_t *pattern, snd_ctl_elem_id_t *id)
+{
+ if (snd_ctl_elem_id_get_interface(pattern) != -1 &&
+ snd_ctl_elem_id_get_interface(pattern) != snd_ctl_elem_id_get_interface(id))
+ return 0;
+ if (snd_ctl_elem_id_get_device(pattern) != -1 &&
+ snd_ctl_elem_id_get_device(pattern) != snd_ctl_elem_id_get_device(id))
+ return 0;
+ if (snd_ctl_elem_id_get_subdevice(pattern) != -1 &&
+ snd_ctl_elem_id_get_subdevice(pattern) != snd_ctl_elem_id_get_subdevice(id))
+ return 0;
+ if (snd_ctl_elem_id_get_index(pattern) != -1 &&
+ snd_ctl_elem_id_get_index(pattern) != snd_ctl_elem_id_get_index(id))
+ return 0;
+ if (fnmatch(snd_ctl_elem_id_get_name(pattern), snd_ctl_elem_id_get_name(id), 0) != 0)
+ return 0;
+ return 1;
+}
+
+static const char *elemid_get(struct space *space, const char *attr)
+{
+ long long val;
+ snd_ctl_elem_type_t type;
+ static char res[256];
+
+ if (strncasecmp(attr, "numid", 5) == 0) {
+ val = snd_ctl_elem_id_get_numid(space->ctl_id);
+ goto value;
+ }
+ if (strncasecmp(attr, "iface", 5) == 0 ||
+ strncasecmp(attr, "interface", 9) == 0)
+ return snd_ctl_elem_iface_name(snd_ctl_elem_id_get_interface(space->ctl_id));
+ if (strncasecmp(attr, "device", 6) == 0) {
+ val = snd_ctl_elem_id_get_device(space->ctl_id);
+ goto value;
+ }
+ if (strncasecmp(attr, "subdev", 6) == 0) {
+ val = snd_ctl_elem_id_get_subdevice(space->ctl_id);
+ goto value;
+ }
+ if (strncasecmp(attr, "name", 4) == 0)
+ return snd_ctl_elem_id_get_name(space->ctl_id);
+ if (strncasecmp(attr, "index", 5) == 0) {
+ val = snd_ctl_elem_id_get_index(space->ctl_id);
+ goto value;
+ }
+ if (strncasecmp(attr, "type", 4) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ return snd_ctl_elem_type_name(snd_ctl_elem_info_get_type(space->ctl_info));
+ }
+ if (strncasecmp(attr, "attr", 4) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ res[0] = '\0';
+ if (snd_ctl_elem_info_is_readable(space->ctl_info))
+ strcat(res, "r");
+ if (snd_ctl_elem_info_is_writable(space->ctl_info))
+ strcat(res, "w");
+ if (snd_ctl_elem_info_is_volatile(space->ctl_info))
+ strcat(res, "v");
+ if (snd_ctl_elem_info_is_inactive(space->ctl_info))
+ strcat(res, "i");
+ if (snd_ctl_elem_info_is_locked(space->ctl_info))
+ strcat(res, "l");
+ if (snd_ctl_elem_info_is_tlv_readable(space->ctl_info))
+ strcat(res, "R");
+ if (snd_ctl_elem_info_is_tlv_writable(space->ctl_info))
+ strcat(res, "W");
+ if (snd_ctl_elem_info_is_tlv_commandable(space->ctl_info))
+ strcat(res, "C");
+ if (snd_ctl_elem_info_is_owner(space->ctl_info))
+ strcat(res, "o");
+ if (snd_ctl_elem_info_is_user(space->ctl_info))
+ strcat(res, "u");
+ return res;
+ }
+ if (strncasecmp(attr, "owner", 5) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ val = snd_ctl_elem_info_get_owner(space->ctl_info);
+ goto value;
+ }
+ if (strncasecmp(attr, "count", 5) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ val = snd_ctl_elem_info_get_count(space->ctl_info);
+ goto value;
+ }
+ if (strncasecmp(attr, "min", 3) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ type = snd_ctl_elem_info_get_type(space->ctl_info);
+ if (type == SND_CTL_ELEM_TYPE_INTEGER64)
+ val = snd_ctl_elem_info_get_min64(space->ctl_info);
+ else if (type == SND_CTL_ELEM_TYPE_INTEGER)
+ val = snd_ctl_elem_info_get_min(space->ctl_info);
+ else
+ goto empty;
+ goto value;
+ }
+ if (strncasecmp(attr, "max", 3) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ type = snd_ctl_elem_info_get_type(space->ctl_info);
+ if (type == SND_CTL_ELEM_TYPE_INTEGER64)
+ val = snd_ctl_elem_info_get_max64(space->ctl_info);
+ else if (type == SND_CTL_ELEM_TYPE_INTEGER)
+ val = snd_ctl_elem_info_get_max(space->ctl_info);
+ else
+ goto empty;
+ goto value;
+ }
+ if (strncasecmp(attr, "step", 3) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ type = snd_ctl_elem_info_get_type(space->ctl_info);
+ if (type == SND_CTL_ELEM_TYPE_INTEGER64)
+ val = snd_ctl_elem_info_get_step64(space->ctl_info);
+ else if (type == SND_CTL_ELEM_TYPE_INTEGER)
+ val = snd_ctl_elem_info_get_step(space->ctl_info);
+ else
+ goto empty;
+ goto value;
+ }
+ if (strncasecmp(attr, "items", 5) == 0) {
+ if (check_id_changed(space, 1))
+ return NULL;
+ if (snd_ctl_elem_info_get_type(space->ctl_info) == SND_CTL_ELEM_TYPE_ENUMERATED)
+ val = snd_ctl_elem_info_get_items(space->ctl_info);
+ else {
+ empty:
+ res[0] = '\0';
+ return res;
+ }
+ goto value;
+ }
+ if (strncasecmp(attr, "value", 5) == 0) {
+ if (check_id_changed(space, 3))
+ return NULL;
+ return get_ctl_value(space);
+ }
+ if (strncasecmp(attr, "dBmin", 5) == 0) {
+ long min, max;
+ if (check_id_changed(space, 1))
+ return NULL;
+ if (snd_ctl_get_dB_range(snd_hctl_ctl(space->ctl_handle), space->ctl_id, &min, &max) < 0)
+ goto empty;
+ val = min;
+dbvalue:
+ sprintf(res, "%li.%02idB", (long)(val / 100), (int)abs(val % 100));
+ return res;
+ }
+ if (strncasecmp(attr, "dBmax", 5) == 0) {
+ long min, max;
+ if (check_id_changed(space, 1))
+ return NULL;
+ if (snd_ctl_get_dB_range(snd_hctl_ctl(space->ctl_handle), space->ctl_id, &min, &max) < 0)
+ goto empty;
+ val = max;
+ goto dbvalue;
+ }
+ if (strncasecmp(attr, "enums", 5) == 0) {
+ unsigned int idx, items;
+ snd_hctl_elem_t *elem;
+ if (check_id_changed(space, 1))
+ return NULL;
+ if (snd_ctl_elem_info_get_type(space->ctl_info) != SND_CTL_ELEM_TYPE_ENUMERATED)
+ goto empty;
+ items = snd_ctl_elem_info_get_items(space->ctl_info);
+ strcpy(res, "|");
+ for (idx = 0; idx < items; idx++) {
+ snd_ctl_elem_info_set_item(space->ctl_info, idx);
+ elem = snd_hctl_find_elem(space->ctl_handle, space->ctl_id);
+ if (elem == NULL)
+ break;
+ if (snd_hctl_elem_info(elem, space->ctl_info) < 0)
+ break;
+ strlcat(res, snd_ctl_elem_info_get_item_name(space->ctl_info), sizeof(res));
+ strlcat(res, "|", sizeof(res));
+ }
+ return res;
+ }
+ if (strncasecmp(attr, "do_search", 9) == 0) {
+ int err, index = 0;
+ snd_hctl_elem_t *elem;
+ snd_ctl_elem_id_t *id;
+ char *pos = strchr(attr, ' ');
+ if (pos)
+ index = strtol(pos, NULL, 0);
+ err = snd_ctl_elem_id_malloc(&id);
+ if (err < 0)
+ return NULL;
+ elem = snd_hctl_first_elem(space->ctl_handle);
+ while (elem) {
+ snd_hctl_elem_get_id(elem, id);
+ if (!ctl_match(space->ctl_id, id))
+ goto next_search;
+ if (index > 0) {
+ index--;
+ goto next_search;
+ }
+ strcpy(res, "1");
+ snd_ctl_elem_id_copy(space->ctl_id, id);
+ snd_ctl_elem_id_free(id);
+ dbg("do_ctl_search found a control");
+ return res;
+ next_search:
+ elem = snd_hctl_elem_next(elem);
+ }
+ snd_ctl_elem_id_free(id);
+ strcpy(res, "0");
+ return res;
+ }
+ if (strncasecmp(attr, "do_count", 8) == 0) {
+ int err, index = 0;
+ snd_hctl_elem_t *elem;
+ snd_ctl_elem_id_t *id;
+ err = snd_ctl_elem_id_malloc(&id);
+ if (err < 0)
+ return NULL;
+ elem = snd_hctl_first_elem(space->ctl_handle);
+ while (elem) {
+ snd_hctl_elem_get_id(elem, id);
+ if (ctl_match(space->ctl_id, id))
+ index++;
+ elem = snd_hctl_elem_next(elem);
+ }
+ snd_ctl_elem_id_free(id);
+ sprintf(res, "%u", index);
+ dbg("do_ctl_count found %s controls", res);
+ return res;
+ }
+ Perror(space, "unknown ctl{} attribute '%s'", attr);
+ return NULL;
+ value:
+ sprintf(res, "%lli", val);
+ return res;
+}
+
+static int elemid_set(struct space *space, const char *attr, const char *value)
+{
+ unsigned int val;
+ void (*fcn)(snd_ctl_elem_id_t *, unsigned int);
+ snd_ctl_elem_iface_t iface;
+ int err;
+
+ if (strncasecmp(attr, "numid", 5) == 0) {
+ fcn = snd_ctl_elem_id_set_numid;
+ goto value;
+ }
+ if (strncasecmp(attr, "iface", 5) == 0 ||
+ strncasecmp(attr, "interface", 9) == 0 ||
+ strncasecmp(attr, "reset", 5) == 0 ||
+ strncasecmp(attr, "search", 6) == 0) {
+ if (strlen(value) == 0 && strncasecmp(attr, "search", 6) == 0) {
+ iface = 0;
+ goto search;
+ }
+ for (iface = 0; iface <= SND_CTL_ELEM_IFACE_LAST; iface++) {
+ if (strcasecmp(value, snd_ctl_elem_iface_name(iface)) == 0) {
+ if (strncasecmp(attr, "reset", 5) == 0)
+ snd_ctl_elem_id_clear(space->ctl_id);
+ if (strncasecmp(attr, "search", 5) == 0) {
+ search:
+ snd_ctl_elem_id_clear(space->ctl_id);
+ /* -1 means all */
+ snd_ctl_elem_id_set_interface(space->ctl_id, -1);
+ snd_ctl_elem_id_set_device(space->ctl_id, -1);
+ snd_ctl_elem_id_set_subdevice(space->ctl_id, -1);
+ snd_ctl_elem_id_set_name(space->ctl_id, "*");
+ snd_ctl_elem_id_set_index(space->ctl_id, -1);
+ if (strlen(value) == 0)
+ return 0;
+ }
+ snd_ctl_elem_id_set_interface(space->ctl_id, iface);
+ space->ctl_id_changed = ~0;
+ return 0;
+ }
+ }
+ Perror(space, "unknown control interface name '%s'", value);
+ return -EINVAL;
+ }
+ if (strncasecmp(attr, "device", 6) == 0) {
+ fcn = snd_ctl_elem_id_set_device;
+ goto value;
+ }
+ if (strncasecmp(attr, "subdev", 6) == 0) {
+ fcn = snd_ctl_elem_id_set_subdevice;
+ goto value;
+ }
+ if (strncasecmp(attr, "name", 4) == 0) {
+ snd_ctl_elem_id_set_name(space->ctl_id, value);
+ space->ctl_id_changed = ~0;
+ return 0;
+ }
+ if (strncasecmp(attr, "index", 5) == 0) {
+ fcn = snd_ctl_elem_id_set_index;
+ goto value;
+ }
+ if (strncasecmp(attr, "values", 6) == 0 ||
+ strncasecmp(attr, "value", 5) == 0) {
+ err = check_id_changed(space, 1);
+ if (err < 0) {
+ Perror(space, "control element not found");
+ return err;
+ }
+ err = set_ctl_value(space, value, strncasecmp(attr, "values", 6) == 0);
+ if (err < 0) {
+ space->ctl_id_changed |= 2;
+ } else {
+ space->ctl_id_changed &= ~2;
+ snd_ctl_elem_value_set_id(space->ctl_value, space->ctl_id);
+ err = snd_ctl_elem_write(snd_hctl_ctl(space->ctl_handle), space->ctl_value);
+ if (err < 0) {
+ Perror(space, "value write error: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ return err;
+ }
+ Perror(space, "unknown CTL{} attribute '%s'", attr);
+ return -EINVAL;
+ value:
+ val = (unsigned int)strtol(value, NULL, 0);
+ fcn(space->ctl_id, val);
+ space->ctl_id_changed = ~0;
+ return 0;
+}
+
+static int get_key(char **line, char **key, enum key_op *op, char **value)
+{
+ char *linepos;
+ char *temp;
+
+ linepos = *line;
+ if (linepos == NULL && linepos[0] == '\0')
+ return -EINVAL;
+
+ /* skip whitespace */
+ while (isspace(linepos[0]) || linepos[0] == ',')
+ linepos++;
+
+ /* get the key */
+ if (linepos[0] == '\0')
+ return -EINVAL;
+ *key = linepos;
+
+ while (1) {
+ linepos++;
+ if (linepos[0] == '\0')
+ return -1;
+ if (isspace(linepos[0]))
+ break;
+ if (linepos[0] == '=')
+ break;
+ if (linepos[0] == '+')
+ break;
+ if (linepos[0] == '!')
+ break;
+ if (linepos[0] == ':')
+ break;
+ }
+
+ /* remember end of key */
+ temp = linepos;
+
+ /* skip whitespace after key */
+ while (isspace(linepos[0]))
+ linepos++;
+ if (linepos[0] == '\0')
+ return -EINVAL;
+
+ /* get operation type */
+ if (linepos[0] == '=' && linepos[1] == '=') {
+ *op = KEY_OP_MATCH;
+ linepos += 2;
+ dbg("operator=match");
+ } else if (linepos[0] == '!' && linepos[1] == '=') {
+ *op = KEY_OP_NOMATCH;
+ linepos += 2;
+ dbg("operator=nomatch");
+ } else if (linepos[0] == '+' && linepos[1] == '=') {
+ *op = KEY_OP_ADD;
+ linepos += 2;
+ dbg("operator=add");
+ } else if (linepos[0] == '=') {
+ *op = KEY_OP_ASSIGN;
+ linepos++;
+ dbg("operator=assign");
+ } else if (linepos[0] == ':' && linepos[1] == '=') {
+ *op = KEY_OP_ASSIGN_FINAL;
+ linepos += 2;
+ dbg("operator=assign_final");
+ } else
+ return -EINVAL;
+
+ /* terminate key */
+ temp[0] = '\0';
+ dbg("key='%s'", *key);
+
+ /* skip whitespace after operator */
+ while (isspace(linepos[0]))
+ linepos++;
+ if (linepos[0] == '\0')
+ return -EINVAL;
+
+ /* get the value*/
+ if (linepos[0] != '"')
+ return -EINVAL;
+ linepos++;
+ *value = linepos;
+
+ while (1) {
+ temp = strchr(linepos, '"');
+ if (temp && temp[-1] == '\\') {
+ linepos = temp + 1;
+ continue;
+ }
+ break;
+ }
+ if (!temp)
+ return -EINVAL;
+ temp[0] = '\0';
+ temp++;
+ dbg("value='%s'", *value);
+
+ /* move line to next key */
+ *line = temp;
+
+ return 0;
+}
+
+/* extract possible KEY{attr} */
+static char *get_key_attribute(struct space *space, char *str, char *res, size_t ressize)
+{
+ char *pos;
+ char *attr;
+
+ attr = strchr(str, '{');
+ if (attr != NULL) {
+ attr++;
+ pos = strchr(attr, '}');
+ if (pos == NULL) {
+ Perror(space, "missing closing brace for format");
+ return NULL;
+ }
+ pos[0] = '\0';
+ strlcpy(res, attr, ressize);
+ pos[0] = '}';
+ dbg("attribute='%s'", res);
+ return res;
+ }
+
+ return NULL;
+}
+
+/* extract possible {attr} and move str behind it */
+static char *get_format_attribute(struct space *space, char **str)
+{
+ char *pos;
+ char *attr = NULL;
+
+ if (*str[0] == '{') {
+ pos = strchr(*str, '}');
+ if (pos == NULL) {
+ Perror(space, "missing closing brace for format");
+ return NULL;
+ }
+ pos[0] = '\0';
+ attr = *str+1;
+ *str = pos+1;
+ dbg("attribute='%s', str='%s'", attr, *str);
+ }
+ return attr;
+}
+
+/* extract possible format length and move str behind it*/
+static int get_format_len(struct space *space, char **str)
+{
+ int num;
+ char *tail;
+
+ if (isdigit(*str[0])) {
+ num = (int) strtoul(*str, &tail, 10);
+ if (num > 0) {
+ *str = tail;
+ dbg("format length=%i", num);
+ return num;
+ } else {
+ Perror(space, "format parsing error '%s'", *str);
+ }
+ }
+ return -1;
+}
+
+static void apply_format(struct space *space, char *string, size_t maxsize)
+{
+ char temp[PATH_SIZE];
+ char temp2[PATH_SIZE];
+ char *head, *tail, *pos, *cpos, *attr, *rest;
+ struct pair *pair;
+ int len;
+ int i;
+ int count;
+ enum subst_type {
+ SUBST_UNKNOWN,
+ SUBST_CARDINFO,
+ SUBST_CTL,
+ SUBST_RESULT,
+ SUBST_ATTR,
+ SUBST_SYSFSROOT,
+ SUBST_ENV,
+ SUBST_CONFIG,
+ };
+ static const struct subst_map {
+ char *name;
+ char fmt;
+ enum subst_type type;
+ } map[] = {
+ { .name = "cardinfo", .fmt = 'i', .type = SUBST_CARDINFO },
+ { .name = "ctl", .fmt = 'C', .type = SUBST_CTL },
+ { .name = "result", .fmt = 'c', .type = SUBST_RESULT },
+ { .name = "attr", .fmt = 's', .type = SUBST_ATTR },
+ { .name = "sysfsroot", .fmt = 'r', .type = SUBST_SYSFSROOT },
+ { .name = "env", .fmt = 'E', .type = SUBST_ENV },
+ { .name = "config", .fmt = 'g', .type = SUBST_CONFIG },
+ { NULL, '\0', 0 }
+ };
+ enum subst_type type;
+ const struct subst_map *subst;
+
+ head = string;
+ while (1) {
+ len = -1;
+ while (head[0] != '\0') {
+ if (head[0] == '$') {
+ /* substitute named variable */
+ if (head[1] == '\0')
+ break;
+ if (head[1] == '$') {
+ strlcpy(temp, head+2, sizeof(temp));
+ strlcpy(head+1, temp, maxsize);
+ head++;
+ continue;
+ }
+ head[0] = '\0';
+ for (subst = map; subst->name; subst++) {
+ if (strncasecmp(&head[1], subst->name, strlen(subst->name)) == 0) {
+ type = subst->type;
+ tail = head + strlen(subst->name)+1;
+ dbg("will substitute format name '%s'", subst->name);
+ goto found;
+ }
+ }
+ } else if (head[0] == '%') {
+ /* substitute format char */
+ if (head[1] == '\0')
+ break;
+ if (head[1] == '%') {
+ strlcpy(temp, head+2, sizeof(temp));
+ strlcpy(head+1, temp, maxsize);
+ head++;
+ continue;
+ }
+ head[0] = '\0';
+ tail = head+1;
+ len = get_format_len(space, &tail);
+ for (subst = map; subst->name; subst++) {
+ if (tail[0] == subst->fmt) {
+ type = subst->type;
+ tail++;
+ dbg("will substitute format char '%c'", subst->fmt);
+ goto found;
+ }
+ }
+ }
+ head++;
+ }
+ break;
+found:
+ attr = get_format_attribute(space, &tail);
+ strlcpy(temp, tail, sizeof(temp));
+ dbg("format=%i, string='%s', tail='%s'", type ,string, tail);
+
+ switch (type) {
+ case SUBST_CARDINFO:
+ if (attr == NULL)
+ Perror(space, "missing identification parametr for cardinfo");
+ else {
+ const char *value = cardinfo_get(space, attr);
+ if (value == NULL)
+ break;
+ strlcat(string, value, maxsize);
+ dbg("substitute cardinfo{%s} '%s'", attr, value);
+ }
+ break;
+ case SUBST_CTL:
+ if (attr == NULL)
+ Perror(space, "missing identification parametr for ctl");
+ else {
+ const char *value = elemid_get(space, attr);
+ if (value == NULL)
+ break;
+ strlcat(string, value, maxsize);
+ dbg("substitute ctl{%s} '%s'", attr, value);
+ }
+ break;
+ case SUBST_RESULT:
+ if (space->program_result == NULL)
+ break;
+ /* get part part of the result string */
+ i = 0;
+ if (attr != NULL)
+ i = strtoul(attr, &rest, 10);
+ if (i > 0) {
+ dbg("request part #%d of result string", i);
+ cpos = space->program_result;
+ while (--i) {
+ while (cpos[0] != '\0' && !isspace(cpos[0]))
+ cpos++;
+ while (isspace(cpos[0]))
+ cpos++;
+ }
+ if (i > 0) {
+ Perror(space, "requested part of result string not found");
+ break;
+ }
+ strlcpy(temp2, cpos, sizeof(temp2));
+ /* %{2+}c copies the whole string from the second part on */
+ if (rest[0] != '+') {
+ cpos = strchr(temp2, ' ');
+ if (cpos)
+ cpos[0] = '\0';
+ }
+ strlcat(string, temp2, maxsize);
+ dbg("substitute part of result string '%s'", temp2);
+ } else {
+ strlcat(string, space->program_result, maxsize);
+ dbg("substitute result string '%s'", space->program_result);
+ }
+ break;
+ case SUBST_ATTR:
+ if (attr == NULL)
+ Perror(space, "missing file parameter for attr");
+ else {
+ const char *value = NULL;
+ size_t size;
+
+ pair = value_find(space, "sysfs_device");
+ if (pair == NULL)
+ break;
+ value = sysfs_attr_get_value(pair->value, attr);
+
+ if (value == NULL)
+ break;
+
+ /* strip trailing whitespace and replace untrusted characters of sysfs value */
+ size = strlcpy(temp2, value, sizeof(temp2));
+ if (size >= sizeof(temp2))
+ size = sizeof(temp2)-1;
+ while (size > 0 && isspace(temp2[size-1]))
+ temp2[--size] = '\0';
+ count = replace_untrusted_chars(temp2);
+ if (count > 0)
+ Perror(space, "%i untrusted character(s) replaced" , count);
+ strlcat(string, temp2, maxsize);
+ dbg("substitute sysfs value '%s'", temp2);
+ }
+ break;
+ case SUBST_SYSFSROOT:
+ strlcat(string, sysfs_path, maxsize);
+ dbg("substitute sysfs_path '%s'", sysfs_path);
+ break;
+ case SUBST_ENV:
+ if (attr == NULL) {
+ dbg("missing attribute");
+ break;
+ }
+ pos = getenv(attr);
+ if (pos == NULL) {
+ dbg("env '%s' not available", attr);
+ break;
+ }
+ dbg("substitute env '%s=%s'", attr, pos);
+ strlcat(string, pos, maxsize);
+ break;
+ case SUBST_CONFIG:
+ if (attr == NULL) {
+ dbg("missing attribute");
+ break;
+ }
+ pair = value_find(space, attr);
+ if (pair == NULL)
+ break;
+ strlcat(string, pair->value, maxsize);
+ break;
+ default:
+ Perror(space, "unknown substitution type=%i", type);
+ break;
+ }
+ /* possibly truncate to format-char specified length */
+ if (len != -1) {
+ head[len] = '\0';
+ dbg("truncate to %i chars, subtitution string becomes '%s'", len, head);
+ }
+ strlcat(string, temp, maxsize);
+ }
+ /* unescape strings */
+ head = tail = string;
+ while (*head != '\0') {
+ if (*head == '\\') {
+ head++;
+ if (*head == '\0')
+ break;
+ switch (*head) {
+ case 'a': *tail++ = '\a'; break;
+ case 'b': *tail++ = '\b'; break;
+ case 'n': *tail++ = '\n'; break;
+ case 'r': *tail++ = '\r'; break;
+ case 't': *tail++ = '\t'; break;
+ case 'v': *tail++ = '\v'; break;
+ case '\\': *tail++ = '\\'; break;
+ default: *tail++ = *head; break;
+ }
+ head++;
+ continue;
+ }
+ if (*head)
+ *tail++ = *head++;
+ }
+ *tail = 0;
+}
+
+static
+int run_program1(struct space *space,
+ const char *command0, char *result,
+ size_t ressize, size_t *reslen, int log)
+{
+ if (strncmp(command0, "__ctl_search", 12) == 0) {
+ const char *res = elemid_get(space, "do_search");
+ if (res == NULL || strcmp(res, "1") != 0)
+ return EXIT_FAILURE;
+ return EXIT_SUCCESS;
+ }
+ if (strncmp(command0, "__ctl_count", 11) == 0) {
+ const char *res = elemid_get(space, "do_count");
+ if (res == NULL || strcmp(res, "0") == 0)
+ return EXIT_FAILURE;
+ strlcpy(result, res, ressize);
+ return EXIT_SUCCESS;
+ }
+ Perror(space, "unknown buildin command '%s'", command0);
+ return EXIT_FAILURE;
+}
+
+static int parse(struct space *space, const char *filename);
+
+static char *new_root_dir(const char *filename)
+{
+ char *res, *tmp;
+
+ res = strdup(filename);
+ if (res) {
+ tmp = strrchr(res, '/');
+ if (tmp)
+ *tmp = '\0';
+ }
+ dbg("new_root_dir '%s' '%s'", filename, res);
+ return res;
+}
+
+/* return non-zero if the file name has the extension ".conf" */
+static int conf_name_filter(const struct dirent *d)
+{
+ char *ext = strrchr(d->d_name, '.');
+ return ext && !strcmp(ext, ".conf");
+}
+
+static int parse_line(struct space *space, char *line, size_t linesize)
+{
+ char *linepos;
+ char *key, *value, *attr, *temp;
+ struct pair *pair;
+ enum key_op op;
+ int err = 0, count;
+ char string[PATH_SIZE];
+ char result[PATH_SIZE];
+
+ linepos = line;
+ while (*linepos != '\0') {
+ op = KEY_OP_UNSET;
+
+ err = get_key(&linepos, &key, &op, &value);
+ if (err < 0)
+ goto invalid;
+
+ if (strncasecmp(key, "LABEL", 5) == 0) {
+ if (op != KEY_OP_ASSIGN) {
+ Perror(space, "invalid LABEL operation");
+ goto invalid;
+ }
+ if (space->go_to && strcmp(space->go_to, value) == 0) {
+ free(space->go_to);
+ space->go_to = NULL;
+ }
+ continue;
+ }
+
+ if (space->go_to) {
+ dbg("skip (GOTO '%s')", space->go_to);
+ break; /* not for us */
+ }
+
+ if (strncasecmp(key, "CTL{", 4) == 0) {
+ attr = get_key_attribute(space, key + 3, string, sizeof(string));
+ if (attr == NULL) {
+ Perror(space, "error parsing CTL attribute");
+ goto invalid;
+ }
+ if (op == KEY_OP_ASSIGN) {
+ strlcpy(result, value, sizeof(result));
+ apply_format(space, result, sizeof(result));
+ dbg("ctl assign: '%s' '%s'", value, attr);
+ err = elemid_set(space, attr, result);
+ if (space->program_result) {
+ free(space->program_result);
+ space->program_result = NULL;
+ }
+ snprintf(string, sizeof(string), "%i", err);
+ space->program_result = strdup(string);
+ err = 0;
+ if (space->program_result == NULL)
+ break;
+ } else if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ if (strncmp(attr, "write", 5) == 0) {
+ strlcpy(result, value, sizeof(result));
+ apply_format(space, result, sizeof(result));
+ dbg("ctl write: '%s' '%s'", value, attr);
+ err = elemid_set(space, "values", result);
+ if (err == 0 && op == KEY_OP_NOMATCH)
+ break;
+ if (err != 0 && op == KEY_OP_MATCH)
+ break;
+ } else {
+ temp = (char *)elemid_get(space, attr);
+ dbg("ctl match: '%s' '%s' '%s'", attr, value, temp);
+ if (!do_match(key, op, value, temp))
+ break;
+ }
+ } else {
+ Perror(space, "invalid CTL{} operation");
+ goto invalid;
+ }
+ continue;
+ }
+ if (strcasecmp(key, "RESULT") == 0) {
+ if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ if (!do_match(key, op, value, space->program_result))
+ break;
+ } else if (op == KEY_OP_ASSIGN) {
+ if (space->program_result) {
+ free(space->program_result);
+ space->program_result = NULL;
+ }
+ strlcpy(string, value, sizeof(string));
+ apply_format(space, string, sizeof(string));
+ space->program_result = strdup(string);
+ if (space->program_result == NULL)
+ break;
+ } else {
+ Perror(space, "invalid RESULT operation");
+ goto invalid;
+ }
+ continue;
+ }
+ if (strcasecmp(key, "PROGRAM") == 0) {
+ if (op == KEY_OP_UNSET)
+ continue;
+ strlcpy(string, value, sizeof(string));
+ apply_format(space, string, sizeof(string));
+ if (space->program_result) {
+ free(space->program_result);
+ space->program_result = NULL;
+ }
+ if (run_program(space, string, result, sizeof(result), NULL, space->log_run) != 0) {
+ dbg("PROGRAM '%s' is false", string);
+ if (op != KEY_OP_NOMATCH)
+ break;
+ } else {
+ remove_trailing_chars(result, '\n');
+ count = replace_untrusted_chars(result);
+ if (count)
+ info("%i untrusted character(s) replaced", count);
+ dbg("PROGRAM '%s' result is '%s'", string, result);
+ space->program_result = strdup(result);
+ if (space->program_result == NULL)
+ break;
+ dbg("PROGRAM returned successful");
+ if (op == KEY_OP_NOMATCH)
+ break;
+ }
+ dbg("PROGRAM key is true");
+ continue;
+ }
+ if (strncasecmp(key, "CARDINFO{", 9) == 0) {
+ attr = get_key_attribute(space, key + 8, string, sizeof(string));
+ if (attr == NULL) {
+ Perror(space, "error parsing CARDINFO attribute");
+ goto invalid;
+ }
+ if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ dbg("cardinfo: '%s' '%s'", value, attr);
+ temp = (char *)cardinfo_get(space, attr);
+ if (!do_match(key, op, value, temp))
+ break;
+ } else {
+ Perror(space, "invalid CARDINFO{} operation");
+ goto invalid;
+ }
+ continue;
+ }
+ if (strncasecmp(key, "ATTR{", 5) == 0) {
+ attr = get_key_attribute(space, key + 4, string, sizeof(string));
+ if (attr == NULL) {
+ Perror(space, "error parsing ATTR attribute");
+ goto invalid;
+ }
+ if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ pair = value_find(space, "sysfs_device");
+ if (pair == NULL)
+ break;
+ dbg("sysfs_attr: '%s' '%s'", pair->value, attr);
+ temp = sysfs_attr_get_value(pair->value, attr);
+ if (!do_match(key, op, value, temp))
+ break;
+ } else {
+ Perror(space, "invalid ATTR{} operation");
+ goto invalid;
+ }
+ continue;
+ }
+ if (strncasecmp(key, "ENV{", 4) == 0) {
+ attr = get_key_attribute(space, key + 3, string, sizeof(string));
+ if (attr == NULL) {
+ Perror(space, "error parsing ENV attribute");
+ goto invalid;
+ }
+ if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ temp = getenv(attr);
+ dbg("env: '%s' '%s'", attr, temp);
+ if (!do_match(key, op, value, temp))
+ break;
+ } else if (op == KEY_OP_ASSIGN ||
+ op == KEY_OP_ASSIGN_FINAL) {
+ strlcpy(result, value, sizeof(result));
+ apply_format(space, result, sizeof(result));
+ dbg("env set: '%s' '%s'", attr, result);
+ if (setenv(attr, result, op == KEY_OP_ASSIGN_FINAL))
+ break;
+ } else {
+ Perror(space, "invalid ENV{} operation");
+ goto invalid;
+ }
+ continue;
+ }
+ if (strcasecmp(key, "GOTO") == 0) {
+ if (op != KEY_OP_ASSIGN) {
+ Perror(space, "invalid GOTO operation");
+ goto invalid;
+ }
+ space->go_to = strdup(value);
+ if (space->go_to == NULL) {
+ err = -ENOMEM;
+ break;
+ }
+ continue;
+ }
+ if (strcasecmp(key, "INCLUDE") == 0) {
+ char *rootdir, *go_to;
+ const char *filename;
+ struct stat st;
+ int linenum;
+ if (op != KEY_OP_ASSIGN) {
+ Perror(space, "invalid INCLUDE operation");
+ goto invalid;
+ }
+ if (value[0] == '/')
+ strlcpy(string, value, sizeof(string));
+ else {
+ strlcpy(string, space->rootdir, sizeof(string));
+ strlcat(string, "/", sizeof(string));
+ strlcat(string, value, sizeof(string));
+ }
+ rootdir = space->rootdir;
+ go_to = space->go_to;
+ filename = space->filename;
+ linenum = space->linenum;
+ if (stat(string, &st)) {
+ Perror(space, "invalid filename '%s'", string);
+ continue;
+ }
+ if (S_ISDIR(st.st_mode)) {
+ struct dirent **list;
+ int i, num;
+ num = scandir(string, &list, conf_name_filter,
+ alphasort);
+ if (num < 0) {
+ Perror(space, "invalid directory '%s'", string);
+ continue;
+ }
+ count = strlen(string);
+ for (i = 0; i < num; i++) {
+ string[count] = '\0';
+ strlcat(string, "/", sizeof(string));
+ strlcat(string, list[i]->d_name, sizeof(string));
+ space->go_to = NULL;
+ space->rootdir = new_root_dir(string);
+ free(list[i]);
+ if (space->rootdir) {
+ err = parse(space, string);
+ free(space->rootdir);
+ } else
+ err = -ENOMEM;
+ if (space->go_to) {
+ Perror(space, "unterminated GOTO '%s'", space->go_to);
+ free(space->go_to);
+ }
+ if (err)
+ break;
+ }
+ free(list);
+ } else {
+ space->go_to = NULL;
+ space->rootdir = new_root_dir(string);
+ if (space->rootdir) {
+ err = parse(space, string);
+ free(space->rootdir);
+ } else
+ err = -ENOMEM;
+ if (space->go_to) {
+ Perror(space, "unterminated GOTO '%s'", space->go_to);
+ free(space->go_to);
+ }
+ }
+ space->go_to = go_to;
+ space->rootdir = rootdir;
+ space->filename = filename;
+ space->linenum = linenum;
+ if (space->quit)
+ break;
+ if (err)
+ break;
+ continue;
+ }
+ if (strncasecmp(key, "ACCESS", 6) == 0) {
+ if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ if (value[0] == '$') {
+ strlcpy(string, value, sizeof(string));
+ apply_format(space, string, sizeof(string));
+ if (string[0] == '/')
+ goto __access1;
+ }
+ if (value[0] != '/') {
+ strlcpy(string, space->rootdir, sizeof(string));
+ strlcat(string, "/", sizeof(string));
+ strlcat(string, value, sizeof(string));
+ } else {
+ strlcpy(string, value, sizeof(string));
+ }
+ apply_format(space, string, sizeof(string));
+ __access1:
+ count = access(string, F_OK);
+ dbg("access(%s) = %i (%s)", string, count, value);
+ if (op == KEY_OP_MATCH && count != 0)
+ break;
+ if (op == KEY_OP_NOMATCH && count == 0)
+ break;
+ } else {
+ Perror(space, "invalid ACCESS operation");
+ goto invalid;
+ }
+ continue;
+ }
+ if (strncasecmp(key, "PRINT", 5) == 0) {
+ if (op != KEY_OP_ASSIGN) {
+ Perror(space, "invalid PRINT operation");
+ goto invalid;
+ }
+ strlcpy(string, value, sizeof(string));
+ apply_format(space, string, sizeof(string));
+ fwrite(string, strlen(string), 1, stdout);
+ continue;
+ }
+ if (strncasecmp(key, "ERROR", 5) == 0) {
+ if (op != KEY_OP_ASSIGN) {
+ Perror(space, "invalid ERROR operation");
+ goto invalid;
+ }
+ strlcpy(string, value, sizeof(string));
+ apply_format(space, string, sizeof(string));
+ fwrite(string, strlen(string), 1, stderr);
+ continue;
+ }
+ if (strncasecmp(key, "EXIT", 4) == 0) {
+ if (op != KEY_OP_ASSIGN) {
+ Perror(space, "invalid EXIT operation");
+ goto invalid;
+ }
+ strlcpy(string, value, sizeof(string));
+ apply_format(space, string, sizeof(string));
+ if (strcmp(string, "return") == 0)
+ return -EJUSTRETURN;
+ space->exit_code = strtol(string, NULL, 0);
+ space->quit = 1;
+ break;
+ }
+ if (strncasecmp(key, "CONFIG{", 7) == 0) {
+ attr = get_key_attribute(space, key + 6, string, sizeof(string));
+ if (attr == NULL) {
+ Perror(space, "error parsing CONFIG attribute");
+ goto invalid;
+ }
+ strlcpy(result, value, sizeof(result));
+ apply_format(space, result, sizeof(result));
+ if (op == KEY_OP_ASSIGN) {
+ err = value_set(space, attr, result);
+ dbg("CONFIG{%s}='%s'", attr, result);
+ break;
+ } else if (op == KEY_OP_MATCH || op == KEY_OP_NOMATCH) {
+ pair = value_find(space, attr);
+ if (pair == NULL)
+ break;
+ if (!do_match(key, op, result, pair->value))
+ break;
+ } else {
+ Perror(space, "invalid CONFIG{} operation");
+ goto invalid;
+ }
+ }
+
+ Perror(space, "unknown key '%s'", key);
+ }
+ return err;
+
+invalid:
+ Perror(space, "invalid rule");
+ return -EINVAL;
+}
+
+static int parse(struct space *space, const char *filename)
+{
+ char *buf, *bufline, *line;
+ size_t bufsize, pos, count, linesize;
+ unsigned int linenum, i, j, linenum_adj;
+ int err;
+
+ dbg("start of file '%s'", filename);
+
+ if (file_map(filename, &buf, &bufsize) != 0) {
+ err = errno;
+ error("Unable to open file '%s': %s", filename, strerror(err));
+ return -err;
+ }
+
+ err = 0;
+ pos = 0;
+ linenum = 0;
+ linesize = 128;
+ line = malloc(linesize);
+ if (line == NULL)
+ return -ENOMEM;
+ space->filename = filename;
+ while (!err && pos < bufsize && !space->quit) {
+ count = line_width(buf, bufsize, pos);
+ bufline = buf + pos;
+ pos += count + 1;
+ linenum++;
+
+ /* skip whitespaces */
+ while (count > 0 && isspace(bufline[0])) {
+ bufline++;
+ count--;
+ }
+ if (count == 0)
+ continue;
+
+ /* comment check */
+ if (bufline[0] == '#')
+ continue;
+
+ if (count > linesize - 1) {
+ free(line);
+ linesize = (count + 127 + 1) & ~127;
+ if (linesize > 2048) {
+ error("file %s, line %i too long", filename, linenum);
+ err = -EINVAL;
+ break;
+ }
+ line = malloc(linesize);
+ if (line == NULL) {
+ err = -EINVAL;
+ break;
+ }
+ }
+
+ /* skip backslash and newline from multiline rules */
+ linenum_adj = 0;
+ for (i = j = 0; i < count; i++) {
+ if (bufline[i] == '\\' && bufline[i+1] == '\n') {
+ linenum_adj++;
+ continue;
+ }
+ line[j++] = bufline[i];
+ }
+ line[j] = '\0';
+
+ dbg("read (%i) '%s'", linenum, line);
+ space->linenum = linenum;
+ err = parse_line(space, line, linesize);
+ if (err == -EJUSTRETURN) {
+ err = 0;
+ break;
+ }
+ linenum += linenum_adj;
+ }
+
+ free(line);
+ space->filename = NULL;
+ space->linenum = -1;
+ file_unmap(buf, bufsize);
+ dbg("end of file '%s'", filename);
+ return err ? err : -abs(space->exit_code);
+}
+
+int init(const char *filename, const char *cardname)
+{
+ struct space *space;
+ int err = 0, card, first;
+
+ sysfs_init();
+ if (!cardname) {
+ first = 1;
+ card = -1;
+ while (1) {
+ if (snd_card_next(&card) < 0)
+ break;
+ if (card < 0) {
+ if (first) {
+ error("No soundcards found...");
+ return -ENODEV;
+ }
+ break;
+ }
+ first = 0;
+ err = init_space(&space, card);
+ if (err == 0) {
+ space->rootdir = new_root_dir(filename);
+ if (space->rootdir != NULL)
+ err = parse(space, filename);
+ free_space(space);
+ }
+ if (err < 0)
+ break;
+ }
+ } else {
+ card = snd_card_get_index(cardname);
+ if (card < 0) {
+ error("Cannot find soundcard '%s'...", cardname);
+ goto error;
+ }
+ memset(&space, 0, sizeof(space));
+ err = init_space(&space, card);
+ if (err == 0) {
+ space->rootdir = new_root_dir(filename);
+ if (space->rootdir != NULL)
+ err = parse(space, filename);
+ free_space(space);
+ }
+ }
+ error:
+ sysfs_cleanup();
+ return err;
+}
diff --git a/alsactl/init_sysdeps.c b/alsactl/init_sysdeps.c
new file mode 100644
index 0000000..3aca1b4
--- /dev/null
+++ b/alsactl/init_sysdeps.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2005-2006 Kay Sievers <kay.sievers@vrfy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#if defined(__GLIBC__) && !(defined(__UCLIBC__) && defined(__USE_BSD))
+static size_t strlcpy(char *dst, const char *src, size_t size)
+{
+ size_t bytes = 0;
+ char *q = dst;
+ const char *p = src;
+ char ch;
+
+ while ((ch = *p++)) {
+ if (bytes+1 < size)
+ *q++ = ch;
+ bytes++;
+ }
+
+ /* If size == 0 there is no space for a final null... */
+ if (size)
+ *q = '\0';
+ return bytes;
+}
+
+static size_t strlcat(char *dst, const char *src, size_t size)
+{
+ size_t bytes = 0;
+ char *q = dst;
+ const char *p = src;
+ char ch;
+
+ while (bytes < size && *q) {
+ q++;
+ bytes++;
+ }
+ if (bytes == size)
+ return (bytes + strlen(src));
+
+ while ((ch = *p++)) {
+ if (bytes+1 < size)
+ *q++ = ch;
+ bytes++;
+ }
+
+ *q = '\0';
+ return bytes;
+}
+#endif /* __GLIBC__ */
diff --git a/alsactl/init_sysfs.c b/alsactl/init_sysfs.c
new file mode 100644
index 0000000..0cbada2
--- /dev/null
+++ b/alsactl/init_sysfs.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2005-2006 Kay Sievers <kay.sievers@vrfy.org>
+ * 2008 Jaroslav Kysela <perex@perex.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+
+static char sysfs_path[PATH_SIZE];
+
+/* attribute value cache */
+static LIST_HEAD(attr_list);
+struct sysfs_attr {
+ struct list_head node;
+ char path[PATH_SIZE];
+ char *value; /* points to value_local if value is cached */
+ char value_local[NAME_SIZE];
+};
+
+static int sysfs_init(void)
+{
+ const char *env;
+ char sysfs_test[PATH_SIZE];
+
+ env = getenv("SYSFS_PATH");
+ if (env) {
+ strlcpy(sysfs_path, env, sizeof(sysfs_path));
+ remove_trailing_chars(sysfs_path, '/');
+ } else
+ strlcpy(sysfs_path, "/sys", sizeof(sysfs_path));
+ dbg("sysfs_path='%s'", sysfs_path);
+
+ strlcpy(sysfs_test, sysfs_path, sizeof(sysfs_test));
+ strlcat(sysfs_test, "/kernel/uevent_helper", sizeof(sysfs_test));
+ if (access(sysfs_test, F_OK)) {
+ error("sysfs path '%s' is invalid\n", sysfs_path);
+ return -errno;
+ }
+
+ INIT_LIST_HEAD(&attr_list);
+ return 0;
+}
+
+static void sysfs_cleanup(void)
+{
+ struct sysfs_attr *attr_loop;
+ struct sysfs_attr *attr_temp;
+
+ list_for_each_entry_safe(attr_loop, attr_temp, &attr_list, node) {
+ list_del(&attr_loop->node);
+ free(attr_loop);
+ }
+}
+
+static char *sysfs_attr_get_value(const char *devpath, const char *attr_name)
+{
+ char path_full[PATH_SIZE];
+ const char *path;
+ char value[NAME_SIZE];
+ struct sysfs_attr *attr_loop;
+ struct sysfs_attr *attr;
+ struct stat statbuf;
+ int fd;
+ ssize_t size;
+ size_t sysfs_len;
+
+ dbg("open '%s'/'%s'", devpath, attr_name);
+ sysfs_len = strlcpy(path_full, sysfs_path, sizeof(path_full));
+ path = &path_full[sysfs_len];
+ strlcat(path_full, devpath, sizeof(path_full));
+ strlcat(path_full, "/", sizeof(path_full));
+ strlcat(path_full, attr_name, sizeof(path_full));
+
+ /* look for attribute in cache */
+ list_for_each_entry(attr_loop, &attr_list, node) {
+ if (strcmp(attr_loop->path, path) == 0) {
+ dbg("found in cache '%s'", attr_loop->path);
+ return attr_loop->value;
+ }
+ }
+
+ /* store attribute in cache (also negatives are kept in cache) */
+ dbg("new uncached attribute '%s'", path_full);
+ attr = malloc(sizeof(struct sysfs_attr));
+ if (attr == NULL)
+ return NULL;
+ memset(attr, 0x00, sizeof(struct sysfs_attr));
+ strlcpy(attr->path, path, sizeof(attr->path));
+ dbg("add to cache '%s'", path_full);
+ list_add(&attr->node, &attr_list);
+
+ if (lstat(path_full, &statbuf) != 0) {
+ dbg("stat '%s' failed: %s", path_full, strerror(errno));
+ goto out;
+ }
+
+ if (S_ISLNK(statbuf.st_mode)) {
+ /* links return the last element of the target path */
+ char link_target[PATH_SIZE];
+ int len;
+ const char *pos;
+
+ len = readlink(path_full, link_target, sizeof(link_target));
+ if (len > 0) {
+ link_target[len] = '\0';
+ pos = strrchr(link_target, '/');
+ if (pos != NULL) {
+ dbg("cache '%s' with link value '%s'", path_full, pos+1);
+ strlcpy(attr->value_local, &pos[1], sizeof(attr->value_local));
+ attr->value = attr->value_local;
+ }
+ }
+ goto out;
+ }
+
+ /* skip directories */
+ if (S_ISDIR(statbuf.st_mode))
+ goto out;
+
+ /* skip non-readable files */
+ if ((statbuf.st_mode & S_IRUSR) == 0)
+ goto out;
+
+ /* read attribute value */
+ fd = open(path_full, O_RDONLY);
+ if (fd < 0) {
+ dbg("attribute '%s' does not exist", path_full);
+ goto out;
+ }
+ size = read(fd, value, sizeof(value));
+ close(fd);
+ if (size < 0)
+ goto out;
+ if (size == sizeof(value))
+ goto out;
+
+ /* got a valid value, store and return it */
+ value[size] = '\0';
+ remove_trailing_chars(value, '\n');
+ dbg("cache '%s' with attribute value '%s'", path_full, value);
+ strlcpy(attr->value_local, value, sizeof(attr->value_local));
+ attr->value = attr->value_local;
+
+out:
+ return attr->value;
+}
diff --git a/alsactl/init_utils_run.c b/alsactl/init_utils_run.c
new file mode 100644
index 0000000..dde490b
--- /dev/null
+++ b/alsactl/init_utils_run.c
@@ -0,0 +1,247 @@
+/*
+ * Copyright (C) 2004-2005 Kay Sievers <kay.sievers@vrfy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#define MY_MAX(a,b) ((a) > (b) ? (a) : (b))
+
+#define READ_END 0
+#define WRITE_END 1
+
+static
+int run_program1(struct space *space,
+ const char *command0, char *result,
+ size_t ressize, size_t *reslen, int log);
+
+static
+int run_program0(struct space *space,
+ const char *command0, char *result,
+ size_t ressize, size_t *reslen, int log)
+{
+ int retval = 0;
+ int status;
+ int outpipe[2] = {-1, -1};
+ int errpipe[2] = {-1, -1};
+ pid_t pid;
+ char arg[PATH_SIZE];
+ char program[PATH_SIZE];
+ char *argv[(sizeof(arg) / 2) + 1];
+ int devnull;
+ int i;
+
+ /* build argv from comand */
+ strlcpy(arg, command0, sizeof(arg));
+ i = 0;
+ if (strchr(arg, ' ') != NULL) {
+ char *pos = arg;
+
+ while (pos != NULL) {
+ if (pos[0] == '\'') {
+ /* don't separate if in apostrophes */
+ pos++;
+ argv[i] = strsep(&pos, "\'");
+ while (pos != NULL && pos[0] == ' ')
+ pos++;
+ } else {
+ argv[i] = strsep(&pos, " ");
+ }
+ dbg("arg[%i] '%s'", i, argv[i]);
+ i++;
+ }
+ argv[i] = NULL;
+ } else {
+ argv[0] = arg;
+ argv[1] = NULL;
+ }
+ info("'%s'", command0);
+
+ /* prepare pipes from child to parent */
+ if (result || log) {
+ if (pipe(outpipe) != 0) {
+ Perror(space, "pipe failed: %s", strerror(errno));
+ return -1;
+ }
+ }
+ if (log) {
+ if (pipe(errpipe) != 0) {
+ Perror(space, "pipe failed: %s", strerror(errno));
+ return -1;
+ }
+ }
+
+ /* allow programs in /lib/alsa called without the path */
+ if (strchr(argv[0], '/') == NULL) {
+ strlcpy(program, "/lib/alsa/", sizeof(program));
+ strlcat(program, argv[0], sizeof(program));
+ argv[0] = program;
+ }
+
+ pid = fork();
+ switch(pid) {
+ case 0:
+ /* child closes parent ends of pipes */
+ if (outpipe[READ_END] > 0)
+ close(outpipe[READ_END]);
+ if (errpipe[READ_END] > 0)
+ close(errpipe[READ_END]);
+
+ /* discard child output or connect to pipe */
+ devnull = open("/dev/null", O_RDWR);
+ if (devnull > 0) {
+ dup2(devnull, STDIN_FILENO);
+ if (outpipe[WRITE_END] < 0)
+ dup2(devnull, STDOUT_FILENO);
+ if (errpipe[WRITE_END] < 0)
+ dup2(devnull, STDERR_FILENO);
+ close(devnull);
+ } else
+ Perror(space, "open /dev/null failed: %s", strerror(errno));
+ if (outpipe[WRITE_END] > 0) {
+ dup2(outpipe[WRITE_END], STDOUT_FILENO);
+ close(outpipe[WRITE_END]);
+ }
+ if (errpipe[WRITE_END] > 0) {
+ dup2(errpipe[WRITE_END], STDERR_FILENO);
+ close(errpipe[WRITE_END]);
+ }
+ execv(argv[0], argv);
+
+ /* we should never reach this */
+ Perror(space, "exec of program '%s' failed", argv[0]);
+ _exit(1);
+ case -1:
+ Perror(space, "fork of '%s' failed: %s", argv[0], strerror(errno));
+ return -1;
+ default:
+ /* read from child if requested */
+ if (outpipe[READ_END] > 0 || errpipe[READ_END] > 0) {
+ ssize_t count;
+ size_t respos = 0;
+
+ /* parent closes child ends of pipes */
+ if (outpipe[WRITE_END] > 0)
+ close(outpipe[WRITE_END]);
+ if (errpipe[WRITE_END] > 0)
+ close(errpipe[WRITE_END]);
+
+ /* read child output */
+ while (outpipe[READ_END] > 0 || errpipe[READ_END] > 0) {
+ int fdcount;
+ fd_set readfds;
+
+ FD_ZERO(&readfds);
+ if (outpipe[READ_END] > 0)
+ FD_SET(outpipe[READ_END], &readfds);
+ if (errpipe[READ_END] > 0)
+ FD_SET(errpipe[READ_END], &readfds);
+ fdcount = select(MY_MAX(outpipe[READ_END], errpipe[READ_END])+1, &readfds, NULL, NULL, NULL);
+ if (fdcount < 0) {
+ if (errno == EINTR)
+ continue;
+ retval = -1;
+ break;
+ }
+
+ /* get stdout */
+ if (outpipe[READ_END] > 0 && FD_ISSET(outpipe[READ_END], &readfds)) {
+ char inbuf[1024];
+ char *pos;
+ char *line;
+
+ count = read(outpipe[READ_END], inbuf, sizeof(inbuf)-1);
+ if (count <= 0) {
+ close(outpipe[READ_END]);
+ outpipe[READ_END] = -1;
+ if (count < 0) {
+ Perror(space, "stdin read failed: %s", strerror(errno));
+ retval = -1;
+ }
+ continue;
+ }
+ inbuf[count] = '\0';
+
+ /* store result for rule processing */
+ if (result) {
+ if (respos + count < ressize) {
+ memcpy(&result[respos], inbuf, count);
+ respos += count;
+ } else {
+ Perror(space, "ressize %ld too short", (long)ressize);
+ retval = -1;
+ }
+ }
+ pos = inbuf;
+ while ((line = strsep(&pos, "\n")))
+ if (pos || line[0] != '\0')
+ info("'%s' (stdout) '%s'", argv[0], line);
+ }
+
+ /* get stderr */
+ if (errpipe[READ_END] > 0 && FD_ISSET(errpipe[READ_END], &readfds)) {
+ char errbuf[1024];
+ char *pos;
+ char *line;
+
+ count = read(errpipe[READ_END], errbuf, sizeof(errbuf)-1);
+ if (count <= 0) {
+ close(errpipe[READ_END]);
+ errpipe[READ_END] = -1;
+ if (count < 0)
+ Perror(space, "stderr read failed: %s", strerror(errno));
+ continue;
+ }
+ errbuf[count] = '\0';
+ pos = errbuf;
+ while ((line = strsep(&pos, "\n")))
+ if (pos || line[0] != '\0')
+ info("'%s' (stderr) '%s'", argv[0], line);
+ }
+ }
+ if (outpipe[READ_END] > 0)
+ close(outpipe[READ_END]);
+ if (errpipe[READ_END] > 0)
+ close(errpipe[READ_END]);
+
+ /* return the childs stdout string */
+ if (result) {
+ result[respos] = '\0';
+ dbg("result='%s'", result);
+ if (reslen)
+ *reslen = respos;
+ }
+ }
+ waitpid(pid, &status, 0);
+ if (WIFEXITED(status)) {
+ info("'%s' returned with status %i", argv[0], WEXITSTATUS(status));
+ if (WEXITSTATUS(status) != 0)
+ retval = -1;
+ } else {
+ Perror(space, "'%s' abnormal exit", argv[0]);
+ retval = -1;
+ }
+ }
+
+ return retval;
+}
+
+static
+int run_program(struct space *space, const char *command0, char *result,
+ size_t ressize, size_t *reslen, int log)
+{
+ if (command0[0] == '_' && command0[1] == '_')
+ return run_program1(space, command0, result, ressize, reslen, log);
+ return run_program0(space, command0, result, ressize, reslen, log);
+}
diff --git a/alsactl/init_utils_string.c b/alsactl/init_utils_string.c
new file mode 100644
index 0000000..01ea800
--- /dev/null
+++ b/alsactl/init_utils_string.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2004-2005 Kay Sievers <kay.sievers@vrfy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+
+static void remove_trailing_chars(char *path, char c)
+{
+ size_t len;
+
+ len = strlen(path);
+ while (len > 0 && path[len-1] == c)
+ path[--len] = '\0';
+}
+
+/* count of characters used to encode one unicode char */
+static int utf8_encoded_expected_len(const char *str)
+{
+ unsigned char c = (unsigned char)str[0];
+
+ if (c < 0x80)
+ return 1;
+ if ((c & 0xe0) == 0xc0)
+ return 2;
+ if ((c & 0xf0) == 0xe0)
+ return 3;
+ if ((c & 0xf8) == 0xf0)
+ return 4;
+ if ((c & 0xfc) == 0xf8)
+ return 5;
+ if ((c & 0xfe) == 0xfc)
+ return 6;
+ return 0;
+}
+
+/* decode one unicode char */
+static int utf8_encoded_to_unichar(const char *str)
+{
+ int unichar;
+ int len;
+ int i;
+
+ len = utf8_encoded_expected_len(str);
+ switch (len) {
+ case 1:
+ return (int)str[0];
+ case 2:
+ unichar = str[0] & 0x1f;
+ break;
+ case 3:
+ unichar = (int)str[0] & 0x0f;
+ break;
+ case 4:
+ unichar = (int)str[0] & 0x07;
+ break;
+ case 5:
+ unichar = (int)str[0] & 0x03;
+ break;
+ case 6:
+ unichar = (int)str[0] & 0x01;
+ break;
+ default:
+ return -1;
+ }
+
+ for (i = 1; i < len; i++) {
+ if (((int)str[i] & 0xc0) != 0x80)
+ return -1;
+ unichar <<= 6;
+ unichar |= (int)str[i] & 0x3f;
+ }
+
+ return unichar;
+}
+
+/* expected size used to encode one unicode char */
+static int utf8_unichar_to_encoded_len(int unichar)
+{
+ if (unichar < 0x80)
+ return 1;
+ if (unichar < 0x800)
+ return 2;
+ if (unichar < 0x10000)
+ return 3;
+ if (unichar < 0x200000)
+ return 4;
+ if (unichar < 0x4000000)
+ return 5;
+ return 6;
+}
+
+/* check if unicode char has a valid numeric range */
+static int utf8_unichar_valid_range(int unichar)
+{
+ if (unichar > 0x10ffff)
+ return 0;
+ if ((unichar & 0xfffff800) == 0xd800)
+ return 0;
+ if ((unichar > 0xfdcf) && (unichar < 0xfdf0))
+ return 0;
+ if ((unichar & 0xffff) == 0xffff)
+ return 0;
+ return 1;
+}
+
+/* validate one encoded unicode char and return its length */
+static int utf8_encoded_valid_unichar(const char *str)
+{
+ int len;
+ int unichar;
+ int i;
+
+ len = utf8_encoded_expected_len(str);
+ if (len == 0)
+ return -1;
+
+ /* ascii is valid */
+ if (len == 1)
+ return 1;
+
+ /* check if expected encoded chars are available */
+ for (i = 0; i < len; i++)
+ if ((str[i] & 0x80) != 0x80)
+ return -1;
+
+ unichar = utf8_encoded_to_unichar(str);
+
+ /* check if encoded length matches encoded value */
+ if (utf8_unichar_to_encoded_len(unichar) != len)
+ return -1;
+
+ /* check if value has valid range */
+ if (!utf8_unichar_valid_range(unichar))
+ return -1;
+
+ return len;
+}
+
+/* replace everything but whitelisted plain ascii and valid utf8 */
+static int replace_untrusted_chars(char *str)
+{
+ size_t i = 0;
+ int replaced = 0;
+
+ while (str[i] != '\0') {
+ int len;
+
+ /* valid printable ascii char */
+ if ((str[i] >= '0' && str[i] <= '9') ||
+ (str[i] >= 'A' && str[i] <= 'Z') ||
+ (str[i] >= 'a' && str[i] <= 'z') ||
+ strchr(" #$%+-./:=?@_,", str[i])) {
+ i++;
+ continue;
+ }
+ /* valid utf8 is accepted */
+ len = utf8_encoded_valid_unichar(&str[i]);
+ if (len > 1) {
+ i += len;
+ continue;
+ }
+
+ /* everything else is garbage */
+ str[i] = '_';
+ i++;
+ replaced++;
+ }
+
+ return replaced;
+}
diff --git a/alsactl/list.h b/alsactl/list.h
new file mode 100644
index 0000000..8626630
--- /dev/null
+++ b/alsactl/list.h
@@ -0,0 +1,289 @@
+/*
+ * Copied from the Linux kernel source tree, version 2.6.0-test1.
+ *
+ * Licensed under the GPL v2 as per the whole kernel source tree.
+ *
+ */
+
+#ifndef _LIST_H
+#define _LIST_H
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ *
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
+/*
+ * These are non-NULL pointers that will result in page faults
+ * under normal circumstances, used to verify that nobody uses
+ * non-initialized list entries.
+ */
+#define LIST_POISON1 ((void *) 0x00100100)
+#define LIST_POISON2 ((void *) 0x00200200)
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct list_head {
+ struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+ struct list_head name = LIST_HEAD_INIT(name)
+
+#define INIT_LIST_HEAD(ptr) do { \
+ (ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *new,
+ struct list_head *prev,
+ struct list_head *next)
+{
+ next->prev = new;
+ new->next = next;
+ new->prev = prev;
+ prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+ __list_add(new, head, head->next);
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+ __list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+ next->prev = prev;
+ prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static inline void list_del(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+ entry->next = LIST_POISON1;
+ entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static inline void list_del_init(struct list_head *entry)
+{
+ __list_del(entry->prev, entry->next);
+ INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_move - delete from one list and add as another's head
+ * @list: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+ __list_del(list->prev, list->next);
+ list_add(list, head);
+}
+
+/**
+ * list_move_tail - delete from one list and add as another's tail
+ * @list: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void list_move_tail(struct list_head *list,
+ struct list_head *head)
+{
+ __list_del(list->prev, list->next);
+ list_add_tail(list, head);
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(struct list_head *head)
+{
+ return head->next == head;
+}
+
+static inline void __list_splice(struct list_head *list,
+ struct list_head *head)
+{
+ struct list_head *first = list->next;
+ struct list_head *last = list->prev;
+ struct list_head *at = head->next;
+
+ first->prev = head;
+ head->next = first;
+
+ last->next = at;
+ at->prev = last;
+}
+
+/**
+ * list_splice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice(struct list_head *list, struct list_head *head)
+{
+ if (!list_empty(list))
+ __list_splice(list, head);
+}
+
+/**
+ * list_splice_init - join two lists and reinitialise the emptied list.
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_init(struct list_head *list,
+ struct list_head *head)
+{
+ if (!list_empty(list)) {
+ __list_splice(list, head);
+ INIT_LIST_HEAD(list);
+ }
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr: the &struct list_head pointer.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+ container_of(ptr, type, member)
+
+/**
+ * list_for_each - iterate over a list
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ */
+#define list_for_each(pos, head) \
+ for (pos = (head)->next; pos != (head); \
+ pos = pos->next)
+
+/**
+ * __list_for_each - iterate over a list
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ *
+ * This variant differs from list_for_each() in that it's the
+ * simplest possible list iteration code.
+ * Use this for code that knows the list to be very short (empty
+ * or 1 entry) most of the time.
+ */
+#define __list_for_each(pos, head) \
+ for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_prev - iterate over a list backwards
+ * @pos: the &struct list_head to use as a loop counter.
+ * @head: the head for your list.
+ */
+#define list_for_each_prev(pos, head) \
+ for (pos = (head)->prev; pos != (head); pos = pos->prev)
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos: the &struct list_head to use as a loop counter.
+ * @n: another &struct list_head to use as temporary storage
+ * @head: the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+ for (pos = (head)->next, n = pos->next; pos != (head); \
+ pos = n, n = pos->next)
+
+/**
+ * list_for_each_entry - iterate over list of given type
+ * @pos: the type * to use as a loop counter.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member) \
+ for (pos = list_entry((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos: the type * to use as a loop counter.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member) \
+ for (pos = list_entry((head)->prev, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos: the type * to use as a loop counter.
+ * @n: another type * to use as temporary storage
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_safe(pos, n, head, member) \
+ for (pos = list_entry((head)->next, typeof(*pos), member), \
+ n = list_entry(pos->member.next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+#endif /* _LIST_H */
diff --git a/alsactl/lock.c b/alsactl/lock.c
new file mode 100644
index 0000000..587a109
--- /dev/null
+++ b/alsactl/lock.c
@@ -0,0 +1,123 @@
+/*
+ * Advanced Linux Sound Architecture Control Program
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "aconfig.h"
+#include "version.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/stat.h>
+#include "alsactl.h"
+
+static int state_lock_(const char *file, int lock, int timeout)
+{
+ int fd = -1, err = 0;
+ struct flock lck;
+ struct stat st;
+ char lcktxt[12];
+ char *nfile;
+
+ if (!do_lock)
+ return 0;
+ nfile = malloc(strlen(file) + 6);
+ if (nfile == NULL) {
+ error("No enough memory...");
+ return -ENOMEM;
+ }
+ strcpy(nfile, file);
+ strcat(nfile, ".lock");
+ lck.l_type = lock ? F_WRLCK : F_UNLCK;
+ lck.l_whence = SEEK_SET;
+ lck.l_start = 0;
+ lck.l_len = 11;
+ lck.l_pid = 0;
+ if (lock) {
+ snprintf(lcktxt, sizeof(lcktxt), "%10li\n", (long)getpid());
+ } else {
+ snprintf(lcktxt, sizeof(lcktxt), "%10s\n", "");
+ }
+ while (fd < 0 && timeout-- > 0) {
+ fd = open(nfile, O_RDWR);
+ if (fd < 0) {
+ fd = open(nfile, O_RDWR|O_CREAT|O_EXCL, 0644);
+ if (fd < 0) {
+ if (errno == EBUSY || errno == EAGAIN) {
+ sleep(1);
+ timeout--;
+ } else {
+ err = -errno;
+ goto out;
+ }
+ }
+ }
+ }
+ if (fd < 0 && timeout <= 0) {
+ err = -EBUSY;
+ goto out;
+ }
+ if (fstat(fd, &st) < 0) {
+ err = -errno;
+ goto out;
+ }
+ if (st.st_size != 11) {
+ if (write(fd, lcktxt, 11) != 11) {
+ err = -EIO;
+ goto out;
+ }
+ if (lseek(fd, 0, SEEK_SET)) {
+ err = -errno;
+ goto out;
+ }
+ }
+ while (timeout > 0) {
+ if (fcntl(fd, F_SETLK, &lck) < 0) {
+ sleep(1);
+ timeout--;
+ } else {
+ break;
+ }
+ }
+ if (timeout <= 0) {
+ err = -EBUSY;
+ goto out;
+ }
+ if (write(fd, lcktxt, 11) != 11) {
+ err = -EIO;
+ goto out;
+ }
+out:
+ free(nfile);
+ return err;
+}
+
+int state_lock(const char *file, int lock, int timeout)
+{
+ int err;
+
+ err = state_lock_(file, lock, timeout);
+ if (err < 0)
+ error("file %s %slock error: %s", file,
+ lock ? "" : "un", strerror(-err));
+ return err;
+}
diff --git a/alsactl/state.c b/alsactl/state.c
new file mode 100644
index 0000000..c33f501
--- /dev/null
+++ b/alsactl/state.c
@@ -0,0 +1,1780 @@
+/*
+ * Advanced Linux Sound Architecture Control Program
+ * Copyright (c) by Abramo Bagnara <abramo@alsa-project.org>
+ * Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "aconfig.h"
+#include "version.h"
+#include <getopt.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <assert.h>
+#include <errno.h>
+#include <alsa/asoundlib.h>
+#include "alsactl.h"
+
+
+static char *id_str(snd_ctl_elem_id_t *id)
+{
+ static char str[128];
+ assert(id);
+ sprintf(str, "%i,%i,%i,%s,%i",
+ snd_ctl_elem_id_get_interface(id),
+ snd_ctl_elem_id_get_device(id),
+ snd_ctl_elem_id_get_subdevice(id),
+ snd_ctl_elem_id_get_name(id),
+ snd_ctl_elem_id_get_index(id));
+ return str;
+}
+
+static char *num_str(long n)
+{
+ static char str[32];
+ sprintf(str, "%ld", n);
+ return str;
+}
+
+static int snd_config_integer_add(snd_config_t *father, char *id, long integer)
+{
+ int err;
+ snd_config_t *leaf;
+ err = snd_config_imake_integer(&leaf, id, integer);
+ if (err < 0)
+ return err;
+ err = snd_config_add(father, leaf);
+ if (err < 0) {
+ snd_config_delete(leaf);
+ return err;
+ }
+ return 0;
+}
+
+static int snd_config_integer64_add(snd_config_t *father, char *id, long long integer)
+{
+ int err;
+ snd_config_t *leaf;
+ err = snd_config_imake_integer64(&leaf, id, integer);
+ if (err < 0)
+ return err;
+ err = snd_config_add(father, leaf);
+ if (err < 0) {
+ snd_config_delete(leaf);
+ return err;
+ }
+ return 0;
+}
+
+static int snd_config_string_add(snd_config_t *father, const char *id, const char *string)
+{
+ int err;
+ snd_config_t *leaf;
+ err = snd_config_imake_string(&leaf, id, string);
+ if (err < 0)
+ return err;
+ err = snd_config_add(father, leaf);
+ if (err < 0) {
+ snd_config_delete(leaf);
+ return err;
+ }
+ return 0;
+}
+
+static int snd_config_compound_add(snd_config_t *father, const char *id, int join,
+ snd_config_t **node)
+{
+ int err;
+ snd_config_t *leaf;
+ err = snd_config_make_compound(&leaf, id, join);
+ if (err < 0)
+ return err;
+ err = snd_config_add(father, leaf);
+ if (err < 0) {
+ snd_config_delete(leaf);
+ return err;
+ }
+ *node = leaf;
+ return 0;
+}
+
+#define MAX_USER_TLV_SIZE 64
+
+static char *tlv_to_str(unsigned int *tlv)
+{
+ int i, len = tlv[1] / 4 + 2;
+ char *s, *p;
+
+ if (len >= MAX_USER_TLV_SIZE)
+ return NULL;
+ s = malloc(len * 8 + 1);
+ if (! s)
+ return NULL;
+ p = s;
+ for (i = 0; i < len; i++) {
+ sprintf(p, "%08x", tlv[i]);
+ p += 8;
+ }
+ return s;
+}
+
+static unsigned int *str_to_tlv(const char *s)
+{
+ int i, j, c, len;
+ unsigned int *tlv;
+
+ len = strlen(s);
+ if (len % 8) /* aligned to 4 bytes (= 8 letters) */
+ return NULL;
+ len /= 8;
+ if (len > MAX_USER_TLV_SIZE)
+ return NULL;
+ tlv = malloc(sizeof(int) * len);
+ if (! tlv)
+ return NULL;
+ for (i = 0; i < len; i++) {
+ tlv[i] = 0;
+ for (j = 0; j < 8; j++) {
+ if ((c = hextodigit(*s++)) < 0) {
+ free(tlv);
+ return NULL;
+ }
+ tlv[i] = (tlv[i] << 4) | c;
+ }
+ }
+ return tlv;
+}
+
+/*
+ * add the TLV string, dB ranges, and dB values to comment fields
+ */
+static int add_tlv_comments(snd_ctl_t *handle, snd_ctl_elem_id_t *id,
+ snd_ctl_elem_info_t *info, snd_ctl_elem_value_t *ctl,
+ snd_config_t *comment)
+{
+ unsigned int tlv[MAX_USER_TLV_SIZE];
+ unsigned int *db;
+ long rangemin, rangemax;
+ long dbmin, dbmax, dbgain;
+ snd_config_t *value;
+ unsigned int i, count;
+ int err;
+
+ if (snd_ctl_elem_tlv_read(handle, id, tlv, sizeof(tlv)) < 0)
+ return 0; /* ignore error */
+
+ if (snd_ctl_elem_info_is_tlv_writable(info)) {
+ char *s = tlv_to_str(tlv);
+ if (s) {
+ err = snd_config_string_add(comment, "tlv", s);
+ free(s);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ }
+
+ err = snd_tlv_parse_dB_info(tlv, sizeof(tlv), &db);
+ if (err <= 0)
+ return 0;
+
+ rangemin = snd_ctl_elem_info_get_min(info);
+ rangemax = snd_ctl_elem_info_get_max(info);
+ snd_tlv_get_dB_range(db, rangemin, rangemax, &dbmin, &dbmax);
+ if (err < 0)
+ return err;
+ snd_config_integer_add(comment, "dbmin", dbmin);
+ snd_config_integer_add(comment, "dbmax", dbmax);
+
+ if (snd_ctl_elem_info_get_type(info) == SND_CTL_ELEM_TYPE_INTEGER) {
+ err = snd_config_compound_add(comment, "dbvalue", 1, &value);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ return err;
+ }
+ count = snd_ctl_elem_info_get_count(info);
+ for (i = 0; i < count; i++) {
+ err = snd_tlv_convert_to_dB(db, rangemin, rangemax,
+ snd_ctl_elem_value_get_integer(ctl, i), &dbgain);
+ if (err < 0) {
+ error("snd_tlv_convert_to_dB: %s", snd_strerror(err));
+ return err;
+ }
+ err = snd_config_integer_add(value, num_str(i), dbgain);
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ }
+ return 0;
+}
+
+static int get_control(snd_ctl_t *handle, snd_ctl_elem_id_t *id, snd_config_t *top)
+{
+ snd_ctl_elem_value_t *ctl;
+ snd_ctl_elem_info_t *info;
+ snd_config_t *control, *comment, *item, *value;
+ const char *s;
+ char buf[256];
+ unsigned int idx;
+ int err;
+ unsigned int device, subdevice, index;
+ const char *name;
+ snd_ctl_elem_type_t type;
+ unsigned int count;
+ snd_ctl_elem_value_alloca(&ctl);
+ snd_ctl_elem_info_alloca(&info);
+ snd_ctl_elem_info_set_id(info, id);
+ err = snd_ctl_elem_info(handle, info);
+ if (err < 0) {
+ error("Cannot read control info '%s': %s", id_str(id), snd_strerror(err));
+ return err;
+ }
+
+ if (!snd_ctl_elem_info_is_readable(info))
+ return 0;
+ snd_ctl_elem_value_set_id(ctl, id);
+ err = snd_ctl_elem_read(handle, ctl);
+ if (err < 0) {
+ error("Cannot read control '%s': %s", id_str(id), snd_strerror(err));
+ return err;
+ }
+
+ err = snd_config_compound_add(top, num_str(snd_ctl_elem_info_get_numid(info)), 0, &control);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ return err;
+ }
+ err = snd_config_make_compound(&comment, "comment", 0);
+ if (err < 0) {
+ error("snd_config_make_compound: %s", snd_strerror(err));
+ return err;
+ }
+
+ buf[0] = '\0';
+ buf[1] = '\0';
+ if (snd_ctl_elem_info_is_readable(info))
+ strcat(buf, " read");
+ if (snd_ctl_elem_info_is_writable(info))
+ strcat(buf, " write");
+ if (snd_ctl_elem_info_is_inactive(info))
+ strcat(buf, " inactive");
+ if (snd_ctl_elem_info_is_volatile(info))
+ strcat(buf, " volatile");
+ if (snd_ctl_elem_info_is_locked(info))
+ strcat(buf, " locked");
+ if (snd_ctl_elem_info_is_user(info))
+ strcat(buf, " user");
+ err = snd_config_string_add(comment, "access", buf + 1);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+
+ type = snd_ctl_elem_info_get_type(info);
+ device = snd_ctl_elem_info_get_device(info);
+ subdevice = snd_ctl_elem_info_get_subdevice(info);
+ index = snd_ctl_elem_info_get_index(info);
+ name = snd_ctl_elem_info_get_name(info);
+ count = snd_ctl_elem_info_get_count(info);
+ s = snd_ctl_elem_type_name(type);
+ err = snd_config_string_add(comment, "type", s);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ err = snd_config_integer_add(comment, "count", count);
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ {
+ long min = snd_ctl_elem_info_get_min(info);
+ long max = snd_ctl_elem_info_get_max(info);
+ long step = snd_ctl_elem_info_get_step(info);
+ if (step)
+ sprintf(buf, "%li - %li (step %li)", min, max, step);
+ else
+ sprintf(buf, "%li - %li", min, max);
+ err = snd_config_string_add(comment, "range", buf);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ if (snd_ctl_elem_info_is_tlv_readable(info)) {
+ err = add_tlv_comments(handle, id, info, ctl, comment);
+ if (err < 0)
+ return err;
+ }
+ break;
+ }
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ {
+ long long min = snd_ctl_elem_info_get_min64(info);
+ long long max = snd_ctl_elem_info_get_max64(info);
+ long long step = snd_ctl_elem_info_get_step64(info);
+ if (step)
+ sprintf(buf, "%Li - %Li (step %Li)", min, max, step);
+ else
+ sprintf(buf, "%Li - %Li", min, max);
+ err = snd_config_string_add(comment, "range", buf);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ break;
+ }
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ {
+ unsigned int items;
+ err = snd_config_compound_add(comment, "item", 1, &item);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ return err;
+ }
+ items = snd_ctl_elem_info_get_items(info);
+ for (idx = 0; idx < items; idx++) {
+ snd_ctl_elem_info_set_item(info, idx);
+ err = snd_ctl_elem_info(handle, info);
+ if (err < 0) {
+ error("snd_ctl_card_info: %s", snd_strerror(err));
+ return err;
+ }
+ err = snd_config_string_add(item, num_str(idx), snd_ctl_elem_info_get_item_name(info));
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ break;
+ }
+ default:
+ break;
+ }
+ s = snd_ctl_elem_iface_name(snd_ctl_elem_info_get_interface(info));
+ err = snd_config_string_add(control, "iface", s);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ if (device != 0) {
+ err = snd_config_integer_add(control, "device", device);
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ if (subdevice != 0) {
+ err = snd_config_integer_add(control, "subdevice", subdevice);
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ err = snd_config_string_add(control, "name", name);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ if (index != 0) {
+ err = snd_config_integer_add(control, "index", index);
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BYTES:
+ case SND_CTL_ELEM_TYPE_IEC958:
+ {
+ size_t size = type == SND_CTL_ELEM_TYPE_BYTES ?
+ count : sizeof(snd_aes_iec958_t);
+ char buf[size * 2 + 1];
+ char *p = buf;
+ char *hex = "0123456789abcdef";
+ const unsigned char *bytes =
+ (const unsigned char *)snd_ctl_elem_value_get_bytes(ctl);
+ for (idx = 0; idx < size; idx++) {
+ int v = bytes[idx];
+ *p++ = hex[v >> 4];
+ *p++ = hex[v & 0x0f];
+ }
+ *p = '\0';
+ err = snd_config_string_add(control, "value", buf);
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ goto finish;
+ }
+ default:
+ break;
+ }
+
+ if (count == 1) {
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ err = snd_config_string_add(control, "value", snd_ctl_elem_value_get_boolean(ctl, 0) ? "true" : "false");
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ goto finish;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ err = snd_config_integer_add(control, "value", snd_ctl_elem_value_get_integer(ctl, 0));
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+ goto finish;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ err = snd_config_integer64_add(control, "value", snd_ctl_elem_value_get_integer64(ctl, 0));
+ if (err < 0) {
+ error("snd_config_integer64_add: %s", snd_strerror(err));
+ return err;
+ }
+ goto finish;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ {
+ unsigned int v = snd_ctl_elem_value_get_enumerated(ctl, 0);
+ snd_config_t *c;
+ err = snd_config_search(item, num_str(v), &c);
+ if (err == 0) {
+ err = snd_config_get_string(c, &s);
+ assert(err == 0);
+ err = snd_config_string_add(control, "value", s);
+ } else {
+ err = snd_config_integer_add(control, "value", v);
+ }
+ if (err < 0)
+ error("snd_config add: %s", snd_strerror(err));
+ goto finish;
+ }
+ default:
+ error("Unknown control type: %d\n", type);
+ return -EINVAL;
+ }
+ }
+
+ err = snd_config_compound_add(control, "value", 1, &value);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ return err;
+ }
+
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ for (idx = 0; idx < count; idx++) {
+ err = snd_config_string_add(value, num_str(idx), snd_ctl_elem_value_get_boolean(ctl, idx) ? "true" : "false");
+ if (err < 0) {
+ error("snd_config_string_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ for (idx = 0; idx < count; idx++) {
+ err = snd_config_integer_add(value, num_str(idx), snd_ctl_elem_value_get_integer(ctl, idx));
+ if (err < 0) {
+ error("snd_config_integer_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ for (idx = 0; idx < count; idx++) {
+ err = snd_config_integer64_add(value, num_str(idx), snd_ctl_elem_value_get_integer64(ctl, idx));
+ if (err < 0) {
+ error("snd_config_integer64_add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ for (idx = 0; idx < count; idx++) {
+ unsigned int v = snd_ctl_elem_value_get_enumerated(ctl, idx);
+ snd_config_t *c;
+ err = snd_config_search(item, num_str(v), &c);
+ if (err == 0) {
+ err = snd_config_get_string(c, &s);
+ assert(err == 0);
+ err = snd_config_string_add(value, num_str(idx), s);
+ } else {
+ err = snd_config_integer_add(value, num_str(idx), v);
+ }
+ if (err < 0) {
+ error("snd_config add: %s", snd_strerror(err));
+ return err;
+ }
+ }
+ break;
+ default:
+ error("Unknown control type: %d\n", type);
+ return -EINVAL;
+ }
+
+finish:
+ err = snd_config_add(control, comment);
+ if (err < 0) {
+ error("snd_config_add: %s", snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+static int get_controls(int cardno, snd_config_t *top)
+{
+ snd_ctl_t *handle;
+ snd_ctl_card_info_t *info;
+ snd_config_t *state, *card, *control;
+ snd_ctl_elem_list_t *list;
+ snd_ctl_elem_id_t *elem_id;
+ unsigned int idx;
+ int err;
+ char name[32];
+ unsigned int count;
+ const char *id;
+ snd_ctl_card_info_alloca(&info);
+ snd_ctl_elem_list_alloca(&list);
+ snd_ctl_elem_id_alloca(&elem_id);
+
+ sprintf(name, "hw:%d", cardno);
+ err = snd_ctl_open(&handle, name, SND_CTL_READONLY);
+ if (err < 0) {
+ error("snd_ctl_open error: %s", snd_strerror(err));
+ return err;
+ }
+ err = snd_ctl_card_info(handle, info);
+ if (err < 0) {
+ error("snd_ctl_card_info error: %s", snd_strerror(err));
+ goto _close;
+ }
+ id = snd_ctl_card_info_get_id(info);
+ err = snd_config_search(top, "state", &state);
+ if (err == 0 &&
+ snd_config_get_type(state) != SND_CONFIG_TYPE_COMPOUND) {
+ error("config state node is not a compound");
+ err = -EINVAL;
+ goto _close;
+ }
+ if (err < 0) {
+ err = snd_config_compound_add(top, "state", 1, &state);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ goto _close;
+ }
+ }
+ err = snd_config_search(state, id, &card);
+ if (err == 0 &&
+ snd_config_get_type(card) != SND_CONFIG_TYPE_COMPOUND) {
+ error("config state.%s node is not a compound", id);
+ err = -EINVAL;
+ goto _close;
+ }
+ if (err < 0) {
+ err = snd_config_compound_add(state, id, 0, &card);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ goto _close;
+ }
+ }
+ err = snd_config_search(card, "control", &control);
+ if (err == 0) {
+ err = snd_config_delete(control);
+ if (err < 0) {
+ error("snd_config_delete: %s", snd_strerror(err));
+ goto _close;
+ }
+ }
+ err = snd_ctl_elem_list(handle, list);
+ if (err < 0) {
+ error("Cannot determine controls: %s", snd_strerror(err));
+ goto _close;
+ }
+ count = snd_ctl_elem_list_get_count(list);
+ err = snd_config_compound_add(card, "control", count > 0, &control);
+ if (err < 0) {
+ error("snd_config_compound_add: %s", snd_strerror(err));
+ goto _close;
+ }
+ if (count == 0) {
+ err = 0;
+ goto _close;
+ }
+ snd_ctl_elem_list_set_offset(list, 0);
+ if (snd_ctl_elem_list_alloc_space(list, count) < 0) {
+ error("No enough memory...");
+ goto _close;
+ }
+ if ((err = snd_ctl_elem_list(handle, list)) < 0) {
+ error("Cannot determine controls (2): %s", snd_strerror(err));
+ goto _free;
+ }
+ for (idx = 0; idx < count; ++idx) {
+ snd_ctl_elem_list_get_id(list, idx, elem_id);
+ err = get_control(handle, elem_id, control);
+ if (err < 0)
+ goto _free;
+ }
+
+ err = 0;
+ _free:
+ snd_ctl_elem_list_free_space(list);
+ _close:
+ snd_ctl_close(handle);
+ return err;
+}
+
+static long config_iface(snd_config_t *n)
+{
+ long i;
+ long long li;
+ snd_ctl_elem_iface_t idx;
+ const char *str;
+ switch (snd_config_get_type(n)) {
+ case SND_CONFIG_TYPE_INTEGER:
+ snd_config_get_integer(n, &i);
+ return i;
+ case SND_CONFIG_TYPE_INTEGER64:
+ snd_config_get_integer64(n, &li);
+ return li;
+ case SND_CONFIG_TYPE_STRING:
+ snd_config_get_string(n, &str);
+ break;
+ default:
+ return -1;
+ }
+ for (idx = 0; idx <= SND_CTL_ELEM_IFACE_LAST; idx++) {
+ if (strcasecmp(snd_ctl_elem_iface_name(idx), str) == 0)
+ return idx;
+ }
+ return -1;
+}
+
+static int config_bool(snd_config_t *n, int doit)
+{
+ const char *str;
+ long val;
+ long long lval;
+
+ switch (snd_config_get_type(n)) {
+ case SND_CONFIG_TYPE_INTEGER:
+ snd_config_get_integer(n, &val);
+ if (val < 0 || val > 1)
+ return -1;
+ return val;
+ case SND_CONFIG_TYPE_INTEGER64:
+ snd_config_get_integer64(n, &lval);
+ if (lval < 0 || lval > 1)
+ return -1;
+ return (int) lval;
+ case SND_CONFIG_TYPE_STRING:
+ snd_config_get_string(n, &str);
+ break;
+ case SND_CONFIG_TYPE_COMPOUND:
+ if (!force_restore || !doit)
+ return -1;
+ n = snd_config_iterator_entry(snd_config_iterator_first(n));
+ return config_bool(n, doit);
+ default:
+ return -1;
+ }
+ if (strcmp(str, "on") == 0 || strcmp(str, "true") == 0)
+ return 1;
+ if (strcmp(str, "off") == 0 || strcmp(str, "false") == 0)
+ return 0;
+ return -1;
+}
+
+static int config_enumerated(snd_config_t *n, snd_ctl_t *handle,
+ snd_ctl_elem_info_t *info, int doit)
+{
+ const char *str;
+ long val;
+ long long lval;
+ unsigned int idx, items;
+
+ switch (snd_config_get_type(n)) {
+ case SND_CONFIG_TYPE_INTEGER:
+ snd_config_get_integer(n, &val);
+ return val;
+ case SND_CONFIG_TYPE_INTEGER64:
+ snd_config_get_integer64(n, &lval);
+ return (int) lval;
+ case SND_CONFIG_TYPE_STRING:
+ snd_config_get_string(n, &str);
+ break;
+ case SND_CONFIG_TYPE_COMPOUND:
+ if (!force_restore || !doit)
+ return -1;
+ n = snd_config_iterator_entry(snd_config_iterator_first(n));
+ return config_enumerated(n, handle, info, doit);
+ default:
+ return -1;
+ }
+ items = snd_ctl_elem_info_get_items(info);
+ for (idx = 0; idx < items; idx++) {
+ int err;
+ snd_ctl_elem_info_set_item(info, idx);
+ err = snd_ctl_elem_info(handle, info);
+ if (err < 0) {
+ error("snd_ctl_elem_info: %s", snd_strerror(err));
+ return err;
+ }
+ if (strcmp(str, snd_ctl_elem_info_get_item_name(info)) == 0)
+ return idx;
+ }
+ return -1;
+}
+
+static int config_integer(snd_config_t *n, long *val, int doit)
+{
+ int err = snd_config_get_integer(n, val);
+ if (err < 0 && force_restore && doit) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_COMPOUND)
+ return err;
+ n = snd_config_iterator_entry(snd_config_iterator_first(n));
+ return config_integer(n, val, doit);
+ }
+ return err;
+}
+
+static int config_integer64(snd_config_t *n, long long *val, int doit)
+{
+ int err = snd_config_get_integer64(n, val);
+ if (err < 0 && force_restore && doit) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_COMPOUND)
+ return err;
+ n = snd_config_iterator_entry(snd_config_iterator_first(n));
+ return config_integer64(n, val, doit);
+ }
+ return err;
+}
+
+static int check_comment_access(snd_config_t *conf, const char *str)
+{
+ snd_config_iterator_t i, next;
+
+ snd_config_for_each(i, next, conf) {
+ snd_config_t *n = snd_config_iterator_entry(i);
+ const char *id, *s;
+ if (snd_config_get_id(n, &id) < 0)
+ continue;
+ if (strcmp(id, "access") == 0) {
+ if (snd_config_get_string(n, &s) < 0)
+ return 0;
+ if (strstr(s, str))
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * get the item type from the given comment config
+ */
+static int get_comment_type(snd_config_t *n)
+{
+ static const snd_ctl_elem_type_t types[] = {
+ SND_CTL_ELEM_TYPE_BOOLEAN,
+ SND_CTL_ELEM_TYPE_INTEGER,
+ SND_CTL_ELEM_TYPE_ENUMERATED,
+ SND_CTL_ELEM_TYPE_BYTES,
+ SND_CTL_ELEM_TYPE_IEC958,
+ SND_CTL_ELEM_TYPE_INTEGER64,
+ };
+ const char *type;
+ unsigned int i;
+
+ if (snd_config_get_string(n, &type) < 0)
+ return -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(types); ++i)
+ if (strcmp(type, snd_ctl_elem_type_name(types[i])) == 0)
+ return types[i];
+ return -EINVAL;
+}
+
+/*
+ * get the value range from the given comment config
+ */
+static int get_comment_range(snd_config_t *n, int ctype,
+ long *imin, long *imax, long *istep)
+{
+ const char *s;
+ int err;
+
+ if (snd_config_get_string(n, &s) < 0)
+ return -EINVAL;
+ switch (ctype) {
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ err = sscanf(s, "%li - %li (step %li)", imin, imax, istep);
+ if (err != 3) {
+ istep = 0;
+ err = sscanf(s, "%li - %li", imin, imax);
+ if (err != 2)
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+struct string_array {
+ unsigned int count;
+ const char **strings;
+};
+
+static int get_comment_items(snd_config_t *n, struct string_array *items)
+{
+ snd_config_iterator_t it, next;
+ unsigned int i;
+ int err;
+
+ snd_config_for_each(it, next, n) {
+ snd_config_t *item = snd_config_iterator_entry(it);
+ const char *id;
+ unsigned int numid;
+
+ if (snd_config_get_id(item, &id) < 0)
+ return -EINVAL;
+ numid = atoi(id);
+ if (numid > 999999)
+ return -EINVAL;
+
+ if (numid >= items->count) {
+ const char **strings = realloc(items->strings, (numid + 1) * sizeof(char *));
+ if (!strings)
+ return -ENOMEM;
+ for (i = items->count; i < numid + 1; ++i)
+ strings[i] = NULL;
+ items->count = numid + 1;
+ items->strings = strings;
+ }
+ err = snd_config_get_string(item, &items->strings[numid]);
+ if (err < 0)
+ return err;
+ }
+
+ for (i = 0; i < items->count; ++i)
+ if (!items->strings[i])
+ return -EINVAL;
+
+ return 0;
+}
+
+static int add_user_control(snd_ctl_t *handle, snd_ctl_elem_info_t *info, snd_config_t *conf)
+{
+ snd_ctl_elem_id_t *id;
+ snd_config_iterator_t i, next;
+ long imin, imax, istep;
+ snd_ctl_elem_type_t ctype;
+ unsigned int count;
+ struct string_array enum_items;
+ int err;
+ unsigned int *tlv;
+
+ imin = imax = istep = 0;
+ count = 0;
+ ctype = SND_CTL_ELEM_TYPE_NONE;
+ enum_items.count = 0;
+ enum_items.strings = NULL;
+ tlv = NULL;
+ snd_config_for_each(i, next, conf) {
+ snd_config_t *n = snd_config_iterator_entry(i);
+ const char *id;
+ if (snd_config_get_id(n, &id) < 0)
+ continue;
+ if (strcmp(id, "type") == 0) {
+ err = get_comment_type(n);
+ if (err < 0)
+ goto error;
+ ctype = err;
+ continue;
+ }
+ if (strcmp(id, "range") == 0) {
+ err = get_comment_range(n, ctype, &imin, &imax, &istep);
+ if (err < 0)
+ goto error;
+ continue;
+ }
+ if (strcmp(id, "count") == 0) {
+ long v;
+ if ((err = snd_config_get_integer(n, &v)) < 0)
+ goto error;
+ count = v;
+ continue;
+ }
+ if (strcmp(id, "item") == 0) {
+ err = get_comment_items(n, &enum_items);
+ if (err < 0)
+ goto error;
+ continue;
+ }
+ if (strcmp(id, "tlv") == 0) {
+ const char *s;
+ if ((err = snd_config_get_string(n, &s)) < 0)
+ goto error;
+ if (tlv)
+ free(tlv);
+ if ((tlv = str_to_tlv(s)) == NULL) {
+ err = -EINVAL;
+ goto error;
+ }
+ continue;
+ }
+ }
+
+ snd_ctl_elem_id_alloca(&id);
+ snd_ctl_elem_info_get_id(info, id);
+ if (count <= 0)
+ count = 1;
+ switch (ctype) {
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ if (imin > imax || istep > imax - imin) {
+ err = -EINVAL;
+ goto error;
+ }
+ err = snd_ctl_elem_add_integer(handle, id, count, imin, imax, istep);
+ if (err < 0)
+ goto error;
+ if (tlv)
+ snd_ctl_elem_tlv_write(handle, id, tlv);
+ break;
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ err = snd_ctl_elem_add_boolean(handle, id, count);
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ err = snd_ctl_elem_add_enumerated(handle, id, count,
+ enum_items.count, enum_items.strings);
+ break;
+ case SND_CTL_ELEM_TYPE_IEC958:
+ err = snd_ctl_elem_add_iec958(handle, id);
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+
+ error:
+ free(tlv);
+ free(enum_items.strings);
+ if (err < 0)
+ return err;
+ return snd_ctl_elem_info(handle, info);
+}
+
+/*
+ * check whether the config item has the same of compatible type
+ */
+static int check_comment_type(snd_config_t *conf, int type)
+{
+ snd_config_t *n;
+ int ctype;
+
+ if (snd_config_search(conf, "type", &n) < 0)
+ return 0; /* not defined */
+ ctype = get_comment_type(n);
+ if (ctype == type)
+ return 0;
+ if ((ctype == SND_CTL_ELEM_TYPE_BOOLEAN ||
+ ctype == SND_CTL_ELEM_TYPE_INTEGER ||
+ ctype == SND_CTL_ELEM_TYPE_INTEGER64 ||
+ ctype == SND_CTL_ELEM_TYPE_ENUMERATED) &&
+ (type == SND_CTL_ELEM_TYPE_BOOLEAN ||
+ type == SND_CTL_ELEM_TYPE_INTEGER ||
+ type == SND_CTL_ELEM_TYPE_INTEGER64 ||
+ type == SND_CTL_ELEM_TYPE_ENUMERATED))
+ return 0; /* OK, compatible */
+ return -EINVAL;
+}
+
+/*
+ * convert from an old value to a new value with the same dB level
+ */
+static int convert_to_new_db(snd_config_t *value, long omin, long omax,
+ long nmin, long nmax,
+ long odbmin, long odbmax,
+ snd_config_t *comment, const char *index,
+ snd_ctl_t *device, snd_ctl_elem_id_t *id,
+ int doit)
+{
+ snd_config_t *db_node;
+ long db, val;
+ int err;
+
+ if (snd_config_searchv(comment, &db_node, "dbvalue", index, NULL) < 0 ||
+ snd_config_get_integer(db_node, &db) < 0) {
+ err = config_integer(value, &val, doit);
+ if (err < 0)
+ return err;
+ if (val < omin || val > omax)
+ return -EINVAL;
+ db = ((val - omin) * (odbmax - odbmin)) / (omax - omin) + odbmin;
+ }
+
+ err = snd_ctl_convert_from_dB(device, id, db, &val, db > 0);
+ if (err < 0)
+ return err;
+ if (val < nmin)
+ val = nmin;
+ else if (val > nmax)
+ val = nmax;
+ return snd_config_set_integer(value, val);
+}
+
+/*
+ * compare the current value range with the old range in comments.
+ * also, if dB information is available, try to compare them.
+ * if any change occurs, try to keep the same dB level.
+ */
+static int check_comment_range(snd_ctl_t *handle, snd_config_t *conf,
+ snd_ctl_elem_info_t *info, snd_config_t *value,
+ int doit)
+{
+ snd_config_t *n;
+ long omin, omax, ostep;
+ long nmin, nmax;
+ long odbmin, odbmax;
+ long ndbmin, ndbmax;
+ snd_ctl_elem_id_t *id;
+
+ if (snd_config_search(conf, "range", &n) < 0)
+ return 0;
+ if (get_comment_range(n, SND_CTL_ELEM_TYPE_INTEGER,
+ &omin, &omax, &ostep) < 0)
+ return 0;
+ nmin = snd_ctl_elem_info_get_min(info);
+ nmax = snd_ctl_elem_info_get_max(info);
+ if (omin != nmin && omax != nmax) {
+ /* Hey, the range mismatches */
+ if (!force_restore || !doit)
+ return -EINVAL;
+ }
+ if (omin >= omax || nmin >= nmax)
+ return 0; /* invalid values */
+
+ if (snd_config_search(conf, "dbmin", &n) < 0)
+ return 0;
+ if (config_integer(n, &odbmin, doit) < 0)
+ return 0;
+ if (snd_config_search(conf, "dbmax", &n) < 0)
+ return 0;
+ if (config_integer(n, &odbmax, doit) < 0)
+ return 0;
+ if (odbmin >= odbmax)
+ return 0; /* invalid values */
+ snd_ctl_elem_id_alloca(&id);
+ snd_ctl_elem_info_get_id(info, id);
+ if (snd_ctl_get_dB_range(handle, id, &ndbmin, &ndbmax) < 0)
+ return 0;
+ if (ndbmin >= ndbmax)
+ return 0; /* invalid values */
+ if (omin == nmin && omax == nmax &&
+ odbmin == ndbmin && odbmax == ndbmax)
+ return 0; /* OK, identical one */
+
+ /* Let's guess the current value from dB range */
+ if (snd_config_get_type(value) == SND_CONFIG_TYPE_COMPOUND) {
+ snd_config_iterator_t i, next;
+ snd_config_for_each(i, next, value) {
+ snd_config_t *n = snd_config_iterator_entry(i);
+ const char *idxstr;
+ if (snd_config_get_id(n, &idxstr) < 0)
+ continue;
+ convert_to_new_db(n, omin, omax, nmin, nmax,
+ odbmin, odbmax, conf, idxstr,
+ handle, id, doit);
+ }
+ } else
+ convert_to_new_db(value, omin, omax, nmin, nmax,
+ odbmin, odbmax, conf, "0",
+ handle, id, doit);
+ return 0;
+}
+
+static int restore_config_value(snd_ctl_t *handle, snd_ctl_elem_info_t *info,
+ snd_ctl_elem_iface_t type,
+ snd_config_t *value,
+ snd_ctl_elem_value_t *ctl, int idx,
+ int doit)
+{
+ long val;
+ long long lval;
+ int err;
+
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ val = config_bool(value, doit);
+ if (val >= 0) {
+ snd_ctl_elem_value_set_boolean(ctl, idx, val);
+ return 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ err = config_integer(value, &val, doit);
+ if (err == 0) {
+ snd_ctl_elem_value_set_integer(ctl, idx, val);
+ return 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ err = config_integer64(value, &lval, doit);
+ if (err == 0) {
+ snd_ctl_elem_value_set_integer64(ctl, idx, lval);
+ return 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ val = config_enumerated(value, handle, info, doit);
+ if (val >= 0) {
+ snd_ctl_elem_value_set_enumerated(ctl, idx, val);
+ return 1;
+ }
+ break;
+ case SND_CTL_ELEM_TYPE_BYTES:
+ case SND_CTL_ELEM_TYPE_IEC958:
+ break;
+ default:
+ cerror(doit, "Unknow control type: %d", type);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int restore_config_value2(snd_ctl_t *handle, snd_ctl_elem_info_t *info,
+ snd_ctl_elem_iface_t type,
+ snd_config_t *value,
+ snd_ctl_elem_value_t *ctl, int idx,
+ unsigned int numid, int doit)
+{
+ int err = restore_config_value(handle, info, type, value, ctl, idx, doit);
+ long val;
+
+ if (err != 0)
+ return err;
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BYTES:
+ case SND_CTL_ELEM_TYPE_IEC958:
+ err = snd_config_get_integer(value, &val);
+ if (err < 0 || val < 0 || val > 255) {
+ cerror(doit, "bad control.%d.value.%d content", numid, idx);
+ return force_restore && doit ? 0 : -EINVAL;
+ }
+ snd_ctl_elem_value_set_byte(ctl, idx, val);
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static int set_control(snd_ctl_t *handle, snd_config_t *control,
+ int *maxnumid, int doit)
+{
+ snd_ctl_elem_value_t *ctl;
+ snd_ctl_elem_info_t *info;
+ snd_config_iterator_t i, next;
+ unsigned int numid1;
+ snd_ctl_elem_iface_t iface = -1;
+ int iface1;
+ const char *name1;
+ unsigned int numid;
+ snd_ctl_elem_type_t type;
+ unsigned int count;
+ long device = -1;
+ long device1;
+ long subdevice = -1;
+ long subdevice1;
+ const char *name = NULL;
+ long index1;
+ long index = -1;
+ snd_config_t *value = NULL;
+ snd_config_t *comment = NULL;
+ unsigned int idx;
+ int err;
+ char *set;
+ const char *id;
+ snd_ctl_elem_value_alloca(&ctl);
+ snd_ctl_elem_info_alloca(&info);
+ if (snd_config_get_type(control) != SND_CONFIG_TYPE_COMPOUND) {
+ cerror(doit, "control is not a compound");
+ return -EINVAL;
+ }
+ err = snd_config_get_id(control, &id);
+ if (err < 0) {
+ cerror(doit, "unable to get id");
+ return -EINVAL;
+ }
+ numid = atoi(id);
+ if ((int)numid > *maxnumid)
+ *maxnumid = numid;
+ snd_config_for_each(i, next, control) {
+ snd_config_t *n = snd_config_iterator_entry(i);
+ const char *fld;
+ if (snd_config_get_id(n, &fld) < 0)
+ continue;
+ if (strcmp(fld, "comment") == 0) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_COMPOUND) {
+ cerror(doit, "control.%d.%s is invalid", numid, fld);
+ return -EINVAL;
+ }
+ comment = n;
+ continue;
+ }
+ if (strcmp(fld, "iface") == 0) {
+ iface = (snd_ctl_elem_iface_t)config_iface(n);
+ continue;
+ }
+ if (strcmp(fld, "device") == 0) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_INTEGER) {
+ cerror(doit, "control.%d.%s is invalid", numid, fld);
+ return -EINVAL;
+ }
+ snd_config_get_integer(n, &device);
+ continue;
+ }
+ if (strcmp(fld, "subdevice") == 0) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_INTEGER) {
+ cerror(doit, "control.%d.%s is invalid", numid, fld);
+ return -EINVAL;
+ }
+ snd_config_get_integer(n, &subdevice);
+ continue;
+ }
+ if (strcmp(fld, "name") == 0) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_STRING) {
+ cerror(doit, "control.%d.%s is invalid", numid, fld);
+ return -EINVAL;
+ }
+ snd_config_get_string(n, &name);
+ continue;
+ }
+ if (strcmp(fld, "index") == 0) {
+ if (snd_config_get_type(n) != SND_CONFIG_TYPE_INTEGER) {
+ cerror(doit, "control.%d.%s is invalid", numid, fld);
+ return -EINVAL;
+ }
+ snd_config_get_integer(n, &index);
+ continue;
+ }
+ if (strcmp(fld, "value") == 0) {
+ value = n;
+ continue;
+ }
+ cerror(doit, "unknown control.%d.%s field", numid, fld);
+ }
+ if (!value) {
+ cerror(doit, "missing control.%d.value", numid);
+ return -EINVAL;
+ }
+ if (device < 0)
+ device = 0;
+ if (subdevice < 0)
+ subdevice = 0;
+ if (index < 0)
+ index = 0;
+
+ err = -EINVAL;
+ if (!force_restore) {
+ snd_ctl_elem_info_set_numid(info, numid);
+ err = snd_ctl_elem_info(handle, info);
+ }
+ if (err < 0 && name) {
+ snd_ctl_elem_info_set_numid(info, 0);
+ snd_ctl_elem_info_set_interface(info, iface);
+ snd_ctl_elem_info_set_device(info, device);
+ snd_ctl_elem_info_set_subdevice(info, subdevice);
+ snd_ctl_elem_info_set_name(info, name);
+ snd_ctl_elem_info_set_index(info, index);
+ err = snd_ctl_elem_info(handle, info);
+ if (err < 0 && comment && check_comment_access(comment, "user")) {
+ err = add_user_control(handle, info, comment);
+ if (err < 0) {
+ cerror(doit, "failed to add user control #%d (%s)",
+ numid, snd_strerror(err));
+ return err;
+ }
+ }
+ }
+ if (err < 0) {
+ cerror(doit, "failed to obtain info for control #%d (%s)", numid, snd_strerror(err));
+ return -ENOENT;
+ }
+ numid1 = snd_ctl_elem_info_get_numid(info);
+ iface1 = snd_ctl_elem_info_get_interface(info);
+ device1 = snd_ctl_elem_info_get_device(info);
+ subdevice1 = snd_ctl_elem_info_get_subdevice(info);
+ name1 = snd_ctl_elem_info_get_name(info);
+ index1 = snd_ctl_elem_info_get_index(info);
+ count = snd_ctl_elem_info_get_count(info);
+ type = snd_ctl_elem_info_get_type(info);
+ if (err |= numid != numid1 && !force_restore)
+ cerror(doit, "warning: numid mismatch (%d/%d) for control #%d",
+ numid, numid1, numid);
+ if (err |= iface != iface1)
+ cerror(doit, "warning: iface mismatch (%d/%d) for control #%d", iface, iface1, numid);
+ if (err |= device != device1)
+ cerror(doit, "warning: device mismatch (%ld/%ld) for control #%d", device, device1, numid);
+ if (err |= subdevice != subdevice1)
+ cerror(doit, "warning: subdevice mismatch (%ld/%ld) for control #%d", subdevice, subdevice1, numid);
+ if (err |= strcmp(name, name1))
+ cerror(doit, "warning: name mismatch (%s/%s) for control #%d", name, name1, numid);
+ if (err |= index != index1)
+ cerror(doit, "warning: index mismatch (%ld/%ld) for control #%d", index, index1, numid);
+ if (err < 0) {
+ cerror(doit, "failed to obtain info for control #%d (%s)", numid, snd_strerror(err));
+ return -ENOENT;
+ }
+
+ if (comment) {
+ if (check_comment_type(comment, type) < 0)
+ cerror(doit, "incompatible field type for control #%d", numid);
+ if (type == SND_CTL_ELEM_TYPE_INTEGER) {
+ if (check_comment_range(handle, comment, info, value, doit) < 0) {
+ cerror(doit, "value range mismatch for control #%d",
+ numid);
+ return -EINVAL;
+ }
+ }
+ /* inactive controls are not restored */
+ if (comment && check_comment_access(comment, "inactive"))
+ return 0;
+ }
+
+ if (snd_ctl_elem_info_is_inactive(info) ||
+ !snd_ctl_elem_info_is_writable(info))
+ return 0;
+ snd_ctl_elem_value_set_numid(ctl, numid1);
+
+ if (count == 1) {
+ err = restore_config_value(handle, info, type, value, ctl, 0, doit);
+ if (err < 0)
+ return err;
+ if (err > 0)
+ goto _ok;
+ }
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BYTES:
+ case SND_CTL_ELEM_TYPE_IEC958:
+ {
+ const char *buf;
+ err = snd_config_get_string(value, &buf);
+ if (err >= 0) {
+ int c1 = 0;
+ int len = strlen(buf);
+ unsigned int idx = 0;
+ int size = type == SND_CTL_ELEM_TYPE_BYTES ?
+ count : sizeof(snd_aes_iec958_t);
+ if (size * 2 != len) {
+ cerror(doit, "bad control.%d.value contents\n", numid);
+ return -EINVAL;
+ }
+ while (*buf) {
+ int c = *buf++;
+ if ((c = hextodigit(c)) < 0) {
+ cerror(doit, "bad control.%d.value contents\n", numid);
+ return -EINVAL;
+ }
+ if (idx % 2 == 1)
+ snd_ctl_elem_value_set_byte(ctl, idx / 2, c1 << 4 | c);
+ else
+ c1 = c;
+ idx++;
+ }
+ goto _ok;
+ }
+ }
+ default:
+ break;
+ }
+ if (snd_config_get_type(value) != SND_CONFIG_TYPE_COMPOUND) {
+ if (!force_restore || !doit) {
+ cerror(doit, "bad control.%d.value type", numid);
+ return -EINVAL;
+ }
+ for (idx = 0; idx < count; ++idx) {
+ err = restore_config_value2(handle, info, type, value,
+ ctl, idx, numid, doit);
+ if (err < 0)
+ return err;
+ }
+ goto _ok;
+ }
+
+ set = (char*) alloca(count);
+ memset(set, 0, count);
+ snd_config_for_each(i, next, value) {
+ snd_config_t *n = snd_config_iterator_entry(i);
+ const char *id;
+ if (snd_config_get_id(n, &id) < 0)
+ continue;
+ idx = atoi(id);
+ if (idx >= count || set[idx]) {
+ cerror(doit, "bad control.%d.value index", numid);
+ if (!force_restore || !doit)
+ return -EINVAL;
+ continue;
+ }
+ err = restore_config_value2(handle, info, type, n,
+ ctl, idx, numid, doit);
+ if (err < 0)
+ return err;
+ if (err > 0)
+ set[idx] = 1;
+ }
+ for (idx = 0; idx < count; ++idx) {
+ if (!set[idx]) {
+ cerror(doit, "control.%d.value.%d is not specified", numid, idx);
+ if (!force_restore || !doit)
+ return -EINVAL;
+ }
+ }
+
+ _ok:
+ err = doit ? snd_ctl_elem_write(handle, ctl) : 0;
+ if (err < 0) {
+ error("Cannot write control '%d:%ld:%ld:%s:%ld' : %s", (int)iface, device, subdevice, name, index, snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+static int set_controls(int card, snd_config_t *top, int doit)
+{
+ snd_ctl_t *handle;
+ snd_ctl_card_info_t *info;
+ snd_config_t *control;
+ snd_config_iterator_t i, next;
+ int err, maxnumid = -1;
+ char name[32], tmpid[16];
+ const char *id;
+ snd_ctl_card_info_alloca(&info);
+
+ sprintf(name, "hw:%d", card);
+ dbg("device='%s', doit=%i", name, doit);
+ err = snd_ctl_open(&handle, name, 0);
+ if (err < 0) {
+ error("snd_ctl_open error: %s", snd_strerror(err));
+ return err;
+ }
+ err = snd_ctl_card_info(handle, info);
+ if (err < 0) {
+ error("snd_ctl_card_info error: %s", snd_strerror(err));
+ goto _close;
+ }
+ id = snd_ctl_card_info_get_id(info);
+ dbg("card-info-id: '%s'", id);
+ err = snd_config_searchv(top, &control, "state", id, "control", 0);
+ if (err < 0) {
+ if (force_restore) {
+ sprintf(tmpid, "card%d", card);
+ err = snd_config_searchv(top, &control, "state", tmpid, "control", 0);
+ if (! err)
+ id = tmpid;
+ }
+ if (err < 0) {
+ fprintf(stderr, "No state is present for card %s\n", id);
+ goto _close;
+ }
+ id = tmpid;
+ }
+ if (snd_config_get_type(control) != SND_CONFIG_TYPE_COMPOUND) {
+ cerror(doit, "state.%s.control is not a compound\n", id);
+ return -EINVAL;
+ }
+ snd_config_for_each(i, next, control) {
+ snd_config_t *n = snd_config_iterator_entry(i);
+ err = set_control(handle, n, &maxnumid, doit);
+ if (err < 0 && (!force_restore || !doit))
+ goto _close;
+ }
+
+ dbg("maxnumid=%i", maxnumid);
+ /* check if we have additional controls in driver */
+ /* in this case we should go through init procedure */
+ if (!doit && maxnumid >= 0) {
+ snd_ctl_elem_info_t *info;
+ snd_ctl_elem_info_alloca(&info);
+ snd_ctl_elem_info_set_numid(info, maxnumid+1);
+ if (snd_ctl_elem_info(handle, info) == 0) {
+ /* not very informative */
+ /* but value is used for check only */
+ err = -EAGAIN;
+ dbg("more controls than maxnumid?");
+ goto _close;
+ }
+ }
+
+ _close:
+ snd_ctl_close(handle);
+ dbg("result code: %i", err);
+ return err;
+}
+
+int save_state(const char *file, const char *cardname)
+{
+ int err;
+ snd_config_t *config;
+ snd_input_t *in;
+ snd_output_t *out;
+ int stdio;
+ char *nfile = NULL;
+
+ err = snd_config_top(&config);
+ if (err < 0) {
+ error("snd_config_top error: %s", snd_strerror(err));
+ return err;
+ }
+ stdio = !strcmp(file, "-");
+ if (!stdio) {
+ nfile = malloc(strlen(file) + 5);
+ if (nfile == NULL) {
+ error("No enough memory...");
+ goto out;
+ }
+ strcpy(nfile, file);
+ strcat(nfile, ".new");
+ if (state_lock(file, 1, 10) != 0)
+ goto out;
+ }
+ if (!stdio && (err = snd_input_stdio_open(&in, file, "r")) >= 0) {
+ err = snd_config_load(config, in);
+ snd_input_close(in);
+#if 0
+ if (err < 0) {
+ error("snd_config_load error: %s", snd_strerror(err));
+ goto out;
+ }
+#endif
+ }
+
+ if (!cardname) {
+ int card, first = 1;
+
+ card = -1;
+ /* find each installed soundcards */
+ while (1) {
+ if (snd_card_next(&card) < 0)
+ break;
+ if (card < 0) {
+ if (first) {
+ if (ignore_nocards) {
+ err = 0;
+ goto out;
+ } else {
+ error("No soundcards found...");
+ err = -ENODEV;
+ goto out;
+ }
+ }
+ break;
+ }
+ first = 0;
+ if ((err = get_controls(card, config)))
+ goto out;
+ }
+ } else {
+ int cardno;
+
+ cardno = snd_card_get_index(cardname);
+ if (cardno < 0) {
+ error("Cannot find soundcard '%s'...", cardname);
+ err = cardno;
+ goto out;
+ }
+ if ((err = get_controls(cardno, config))) {
+ goto out;
+ }
+ }
+
+ if (stdio) {
+ err = snd_output_stdio_attach(&out, stdout, 0);
+ } else {
+ err = snd_output_stdio_open(&out, nfile, "w");
+ }
+ if (err < 0) {
+ error("Cannot open %s for writing: %s", file, snd_strerror(err));
+ err = -errno;
+ goto out;
+ }
+ err = snd_config_save(config, out);
+ snd_output_close(out);
+ if (err < 0) {
+ error("snd_config_save: %s", snd_strerror(err));
+ } else {
+ err = rename(nfile, file);
+ if (err < 0)
+ error("rename failed: %s (%s)", strerror(-err), file);
+ }
+out:
+ if (!stdio)
+ state_lock(file, 0, 10);
+ free(nfile);
+ snd_config_delete(config);
+ snd_config_update_free_global();
+ return err;
+}
+
+int load_state(const char *file, const char *initfile, const char *cardname,
+ int do_init)
+{
+ int err, finalerr = 0;
+ snd_config_t *config;
+ snd_input_t *in;
+ int stdio, locked = 0;
+
+ err = snd_config_top(&config);
+ if (err < 0) {
+ error("snd_config_top error: %s", snd_strerror(err));
+ return err;
+ }
+ stdio = !strcmp(file, "-");
+ if (stdio) {
+ err = snd_input_stdio_attach(&in, stdin, 0);
+ } else {
+ err = state_lock(file, 1, 10);
+ locked = err >= 0;
+ err = err >= 0 ? snd_input_stdio_open(&in, file, "r") : err;
+ }
+ if (err >= 0) {
+ err = snd_config_load(config, in);
+ snd_input_close(in);
+ if (locked)
+ state_lock(file, 0, 10);
+ if (err < 0) {
+ error("snd_config_load error: %s", snd_strerror(err));
+ goto out;
+ }
+ } else {
+ int card, first = 1;
+ char cardname1[16];
+
+ error("Cannot open %s for reading: %s", file, snd_strerror(err));
+ finalerr = err;
+ if (cardname) {
+ card = snd_card_get_index(cardname);
+ if (card < 0) {
+ error("Cannot find soundcard '%s'...", cardname);
+ err = -ENODEV;
+ goto out;
+ }
+ goto single;
+ } else {
+ card = -1;
+ }
+ /* find each installed soundcards */
+ while (!cardname) {
+ if (snd_card_next(&card) < 0)
+ break;
+ if (card < 0)
+ break;
+single:
+ first = 0;
+ if (!do_init)
+ break;
+ sprintf(cardname1, "%i", card);
+ err = init(initfile, cardname1);
+ if (err < 0) {
+ finalerr = err;
+ initfailed(card, "init", err);
+ }
+ initfailed(card, "restore", -ENOENT);
+ }
+ if (first)
+ finalerr = 0; /* no cards, no error code */
+ err = finalerr;
+ goto out;
+ }
+
+ if (!cardname) {
+ int card, first = 1;
+ char cardname1[16];
+
+ card = -1;
+ /* find each installed soundcards */
+ while (1) {
+ if (snd_card_next(&card) < 0)
+ break;
+ if (card < 0) {
+ if (first) {
+ if (ignore_nocards) {
+ err = 0;
+ goto out;
+ } else {
+ error("No soundcards found...");
+ err = -ENODEV;
+ goto out;
+ }
+ }
+ break;
+ }
+ first = 0;
+ /* do a check if controls matches state file */
+ if (do_init && set_controls(card, config, 0)) {
+ sprintf(cardname1, "%i", card);
+ err = init(initfile, cardname1);
+ if (err < 0) {
+ initfailed(card, "init", err);
+ finalerr = err;
+ }
+ }
+ if ((err = set_controls(card, config, 1))) {
+ if (!force_restore)
+ finalerr = err;
+ initfailed(card, "restore", err);
+ }
+ }
+ } else {
+ int cardno;
+
+ cardno = snd_card_get_index(cardname);
+ if (cardno < 0) {
+ error("Cannot find soundcard '%s'...", cardname);
+ err = -ENODEV;
+ goto out;
+ }
+ /* do a check if controls matches state file */
+ if (do_init && set_controls(cardno, config, 0)) {
+ err = init(initfile, cardname);
+ if (err < 0) {
+ initfailed(cardno, "init", err);
+ finalerr = err;
+ }
+ }
+ if ((err = set_controls(cardno, config, 1))) {
+ initfailed(cardno, "restore", err);
+ if (!force_restore)
+ goto out;
+ }
+ }
+ err = finalerr;
+out:
+ snd_config_delete(config);
+ snd_config_update_free_global();
+ return err;
+}
diff --git a/alsactl/utils.c b/alsactl/utils.c
new file mode 100644
index 0000000..072c239
--- /dev/null
+++ b/alsactl/utils.c
@@ -0,0 +1,179 @@
+/*
+ * Advanced Linux Sound Architecture Control Program - Support routines
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stddef.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <ctype.h>
+#include <dirent.h>
+#include <syslog.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+
+#include <alsa/asoundlib.h>
+#include "alsactl.h"
+
+int file_map(const char *filename, char **buf, size_t *bufsize)
+{
+ struct stat stats;
+ int fd;
+
+ fd = open(filename, O_RDONLY);
+ if (fd < 0) {
+ return -1;
+ }
+
+ if (fstat(fd, &stats) < 0) {
+ close(fd);
+ return -1;
+ }
+
+ *buf = mmap(NULL, stats.st_size, PROT_READ, MAP_SHARED, fd, 0);
+ if (*buf == MAP_FAILED) {
+ close(fd);
+ return -1;
+ }
+ *bufsize = stats.st_size;
+
+ close(fd);
+
+ return 0;
+}
+
+void file_unmap(void *buf, size_t bufsize)
+{
+ munmap(buf, bufsize);
+}
+
+size_t line_width(const char *buf, size_t bufsize, size_t pos)
+{
+ int esc = 0;
+ size_t count;
+
+ for (count = pos; count < bufsize; count++) {
+ if (!esc && buf[count] == '\n')
+ break;
+ esc = buf[count] == '\\';
+ }
+
+ return count - pos;
+}
+
+void initfailed(int cardnumber, const char *reason, int exitcode)
+{
+ int fp;
+ char *str;
+ char sexitcode[16];
+
+ if (statefile == NULL)
+ return;
+ if (snd_card_get_name(cardnumber, &str) < 0)
+ return;
+ sprintf(sexitcode, "%i", exitcode);
+ fp = open(statefile, O_WRONLY|O_CREAT|O_APPEND, 0644);
+ write(fp, str, strlen(str));
+ write(fp, ":", 1);
+ write(fp, reason, strlen(reason));
+ write(fp, ":", 1);
+ write(fp, sexitcode, strlen(sexitcode));
+ write(fp, "\n", 1);
+ close(fp);
+ free(str);
+}
+
+static void syslog_(int prio, const char *fcn, long line,
+ const char *fmt, va_list ap)
+{
+ char buf[1024];
+
+ snprintf(buf, sizeof(buf), "%s: %s:%ld", command, fcn, line);
+ buf[sizeof(buf)-1] = '\0';
+ vsnprintf(buf + strlen(buf), sizeof(buf)-strlen(buf), fmt, ap);
+ buf[sizeof(buf)-1] = '\0';
+ syslog(LOG_INFO, "%s", buf);
+}
+
+void info_(const char *fcn, long line, const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ if (use_syslog) {
+ syslog_(LOG_INFO, fcn, line, fmt, ap);
+ } else {
+ fprintf(stdout, "%s: %s:%ld: ", command, fcn, line);
+ vfprintf(stdout, fmt, ap);
+ putc('\n', stdout);
+ }
+ va_end(ap);
+}
+
+void error_(const char *fcn, long line, const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ if (use_syslog) {
+ syslog_(LOG_ERR, fcn, line, fmt, ap);
+ } else {
+ fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
+ vfprintf(stderr, fmt, ap);
+ putc('\n', stderr);
+ }
+ va_end(ap);
+}
+
+void cerror_(const char *fcn, long line, int cond, const char *fmt, ...)
+{
+ va_list ap;
+
+ if (!cond && !debugflag)
+ return;
+ if (use_syslog) {
+ syslog_(LOG_ERR, fcn, line, fmt, ap);
+ } else {
+ va_start(ap, fmt);
+ fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
+ vfprintf(stderr, fmt, ap);
+ putc('\n', stderr);
+ va_end(ap);
+ }
+}
+
+void dbg_(const char *fcn, long line, const char *fmt, ...)
+{
+ va_list ap;
+
+ if (!debugflag)
+ return;
+ if (use_syslog) {
+ syslog_(LOG_DEBUG, fcn, line, fmt, ap);
+ } else {
+ va_start(ap, fmt);
+ fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
+ vfprintf(stderr, fmt, ap);
+ putc('\n', stderr);
+ va_end(ap);
+ }
+}
diff --git a/alsaloop/Android.mk b/alsaloop/Android.mk
new file mode 100644
index 0000000..c42964c
--- /dev/null
+++ b/alsaloop/Android.mk
@@ -0,0 +1,14 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := alsaloop
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := alsaloop.c \
+ control.c \
+ pcmjob.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/alsaloop/Makefile.am b/alsaloop/Makefile.am
new file mode 100644
index 0000000..a694911
--- /dev/null
+++ b/alsaloop/Makefile.am
@@ -0,0 +1,14 @@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = -lm
+AM_CFLAGS = -D_GNU_SOURCE
+if HAVE_SAMPLERATE
+LDADD += -lsamplerate
+endif
+# LDFLAGS = -static
+# CFLAGS += -g -Wall
+
+bin_PROGRAMS = alsaloop
+alsaloop_SOURCES = alsaloop.c pcmjob.c control.c
+noinst_HEADERS = alsaloop.h
+man_MANS = alsaloop.1
+EXTRA_DIST = alsaloop.1
diff --git a/alsaloop/Makefile.in b/alsaloop/Makefile.in
new file mode 100644
index 0000000..7d8b83b
--- /dev/null
+++ b/alsaloop/Makefile.in
@@ -0,0 +1,657 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@HAVE_SAMPLERATE_TRUE@am__append_1 = -lsamplerate
+bin_PROGRAMS = alsaloop$(EXEEXT)
+subdir = alsaloop
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_alsaloop_OBJECTS = alsaloop.$(OBJEXT) pcmjob.$(OBJEXT) \
+ control.$(OBJEXT)
+alsaloop_OBJECTS = $(am_alsaloop_OBJECTS)
+alsaloop_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+alsaloop_DEPENDENCIES = $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(alsaloop_SOURCES)
+DIST_SOURCES = $(alsaloop_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = -lm $(am__append_1)
+AM_CFLAGS = -D_GNU_SOURCE
+alsaloop_SOURCES = alsaloop.c pcmjob.c control.c
+noinst_HEADERS = alsaloop.h
+man_MANS = alsaloop.1
+EXTRA_DIST = alsaloop.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaloop/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign alsaloop/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+alsaloop$(EXEEXT): $(alsaloop_OBJECTS) $(alsaloop_DEPENDENCIES) $(EXTRA_alsaloop_DEPENDENCIES)
+ @rm -f alsaloop$(EXEEXT)
+ $(LINK) $(alsaloop_OBJECTS) $(alsaloop_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsaloop.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/control.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcmjob.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/alsaloop/NOTICE b/alsaloop/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/alsaloop/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/alsaloop/alsaloop.1 b/alsaloop/alsaloop.1
new file mode 100644
index 0000000..33fa4d1
--- /dev/null
+++ b/alsaloop/alsaloop.1
@@ -0,0 +1,206 @@
+.TH ALSALOOP 1 "5 Aug 2010"
+.SH NAME
+alsaloop \- command\-line PCM loopback
+.SH SYNOPSIS
+\fBalsaloop\fP [\fI\-option\fP] [\fIcmd\fP]
+.SH DESCRIPTION
+
+\fBalsaloop\fP allows create a PCM loopback between a PCM capture device
+and a PCM playback device.
+
+\fBalsaloop\fP supports multiple soundcards, adaptive clock synchronization,
+adaptive rate resampling using the samplerate library (if available in
+the system). Also, mixer controls can be redirected from one card to
+another (for example Master and PCM).
+
+.SH OPTIONS
+
+.TP
+\fI\-h\fP | \fI\-\-help\fP
+
+Prints the help information.
+
+.TP
+\fI\-g <file>\fP | \fI\-\-config=<file>\fP
+
+Use given configuration file. The syntax of this file is simple: one line
+contains the command line options for one job. The '#' means comment and
+rest of line is ignored. Example:
+
+ # First line \- comment, second line \- first job
+ \-C hw:1,0 \-P hw:0,0 \-t 50000 \-T 1
+ # Third line \- comment, fourth line \- second job
+ \-C hw:1,1 \-P hw:0,1 \-t 40000 \-T 2
+
+.TP
+\fI\-d\fP | \fI\-\-daemonize\fP
+
+Daemonize the main process and use syslog for messages.
+
+.TP
+\fI\-P <device>\fP | \fI\-\-pdevice=<device>\fP
+
+Use given playback device.
+
+.TP
+\fI\-C <device>\fP | \fI\-\-cdevice=<device>\fP
+
+Use given capture device.
+
+.TP
+\fI\-X <device>\fP | \fI\-\-pctl=<device>\fP
+
+Use given CTL device for playback.
+
+.TP
+\fI\-Y <device>\fP | \fI\-\-cctl=<device>\fP
+
+Use given CTL device for capture.
+
+.TP
+\fI\-l <latency>\fP | \fI\-\-latency=<frames>\fP
+
+Requested latency in frames.
+
+.TP
+\fI\-t <usec>\fP | \fI\-\-tlatency=<usec>\fP
+
+Requested latency in usec (1/1000000sec).
+
+.TP
+\fI\-f <format>\fP | \fI\-\-format=<format>\fP
+
+Format specification (usually S16_LE S32_LE). Use \-h to list all formats.
+Default format is S16_LE.
+
+.TP
+\fI\-c <channels>\fP | \fI\-\-channels=<channels>\fP
+
+Channel count specification. Default value is 2.
+
+.TP
+\fI\-c <rate>\fP | \fI\-\-rate=<rate>\fP
+
+Rate specification. Default value is 48000 (Hz).
+
+.TP
+\fI\-n\fP | \fI\-\-resample\fP
+
+Allow rate resampling using alsa\-lib.
+
+.TP
+\fI\-A <converter>\fP | \fI\-\-samplerate=<converter>\fP
+
+Use libsamplerate and choose a converter:
+
+ 0 or sincbest \- best quality
+ 1 or sincmedium \- medium quality
+ 2 or sincfastest \- lowest quality
+ 3 or zerohold \- hold zero samples
+ 4 or linear \- worst quality - linear resampling
+ 5 or auto \- choose best method
+
+.TP
+\fI\-B <size>\fP | \fI\-\-buffer=<size>\fP
+
+Buffer size in frames.
+
+.TP
+\fI\-E <size>\fP | \fI\-\-period=<size>\fP
+
+Period size in frames.
+
+.TP
+\fI\-s <secs>\fP | \fI\-\-seconds=<secs>\fP
+
+Duration of loop in seconds.
+
+.TP
+\fI\-b\fP | \fI\-\-nblock\fP
+
+Non\-block mode (very early process wakeup). Eats more CPU.
+
+.TP
+\fI\-S <mode>\fP | \fI\-\-sync=<mode>\fP
+
+Sync mode specification for capture to playback stream:
+ 0 or none \- do not touch the stream
+ 1 or simple \- add or remove samples to keep
+ both streams synchronized
+ 2 or captshift \- use driver for the capture device
+ (if supported) to compensate
+ the rate shift
+ 3 or playshift \- use driver for the playback device
+ (if supported) to compensate
+ the rate shift
+ 4 or samplerate \- use samplerate library to do rate resampling
+ 5 or auto \- automatically selects the best method
+ in this order: captshift, playshift,
+ samplerate, simple
+
+.TP
+\fI\-T <num>\fP | \fI\-\-thread=<num>\fP
+
+Thread number (\-1 means create a unique thread). All jobs with same
+thread numbers are run within one thread.
+
+.TP
+\fI\-m <mixid>\fP | \fI\-\-mixer=<midid>\fP
+
+Redirect mixer control from the playback card to the capture card. Format of
+\fImixid\fP is SRCID(PLAYBACK)[@DSTID(PLAYBACK)]:
+
+ "name='Master Playback Switch'@name='Another Switch'"
+ "name='PCM Playback Volume'"
+
+Known attributes:
+
+ name \- control ID name
+ index \- control ID index
+ device \- control ID device
+ subdevice \- control ID subdevice
+ iface \- control ID interface
+ numid \- control ID numid
+
+.TP
+\fI\-O <ossmixid>\fP | \fI\-\-ossmixer=<midid>\fP
+
+Redirect mixer control from the OSS Mixer emulation layer (capture card)
+to the ALSA layer (capture card). Format of \fIossmixid\fP is
+ALSAID[,INDEX]@OSSID:
+
+ "Master@VOLUME"
+ "PCM,1@ALTPCM"
+
+Known OSS attributes:
+
+ VOLUME, BASS, TREBLE, SYNTH, PCM, SPEAKER, LINE, MIC, CD, IMIX, ALTPCM,
+ RECLEV, IGAIN, OGAIN, LINE1, LINE2, LINE3, DIGITAL1, DIGITAL2, DIGITAL3,
+ PHONEIN, PHONEOUT, VIDEO, RADIO, MONITOR
+
+.TP
+\fI\-v\fP | \fI\-\-verbose\fP
+
+Verbose mode. Use multiple times to increase verbosity.
+
+
+.TP
+\fI\-U\fP | \fI\-\-xrun\fP
+
+Verbose xrun profiling.
+
+.TP
+\fI\-W <timeout>\fP | \fI\-\-wake=<timeout>\fP
+
+Set process wake timeout.
+
+.SH EXAMPLES
+
+.TP
+\fBalsaloop \-C hw:0,0 \-P hw:1,0 \-t 50000\fR
+
+.SH BUGS
+None known.
+.SH AUTHOR
+\fBalsaloop\fP is by Jaroslav Kysela <perex@perex.cz>.
+This document is by Jaroslav Kysela <perex@perex.cz>.
diff --git a/alsaloop/alsaloop.c b/alsaloop/alsaloop.c
new file mode 100644
index 0000000..e1a36d2
--- /dev/null
+++ b/alsaloop/alsaloop.c
@@ -0,0 +1,922 @@
+/*
+ * A simple PCM loopback utility with adaptive sample rate support
+ *
+ * Author: Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sched.h>
+#include <errno.h>
+#include <getopt.h>
+#include <alsa/asoundlib.h>
+#include <sys/time.h>
+#include <math.h>
+#include <pthread.h>
+#include <syslog.h>
+#include <sys/signal.h>
+#include "alsaloop.h"
+
+struct loopback_thread {
+ int threaded;
+ pthread_t thread;
+ int exitcode;
+ struct loopback **loopbacks;
+ int loopbacks_count;
+ snd_output_t *output;
+};
+
+int quit = 0;
+int verbose = 0;
+int workarounds = 0;
+int daemonize = 0;
+int use_syslog = 0;
+struct loopback **loopbacks = NULL;
+int loopbacks_count = 0;
+char **my_argv = NULL;
+int my_argc = 0;
+struct loopback_thread *threads;
+int threads_count = 0;
+pthread_t main_job;
+int arg_default_xrun = 0;
+int arg_default_wake = 0;
+
+static void my_exit(struct loopback_thread *thread, int exitcode)
+{
+ int i;
+
+ for (i = 0; i < thread->loopbacks_count; i++)
+ pcmjob_done(thread->loopbacks[i]);
+ if (thread->threaded) {
+ thread->exitcode = exitcode;
+ pthread_exit(0);
+ }
+ exit(exitcode);
+}
+
+static int create_loopback_handle(struct loopback_handle **_handle,
+ const char *device,
+ const char *ctldev,
+ const char *id)
+{
+ char idbuf[1024];
+ struct loopback_handle *handle;
+
+ handle = calloc(1, sizeof(*handle));
+ if (handle == NULL)
+ return -ENOMEM;
+ if (device == NULL)
+ device = "hw:0,0";
+ handle->device = strdup(device);
+ if (handle->device == NULL)
+ return -ENOMEM;
+ if (ctldev) {
+ handle->ctldev = strdup(ctldev);
+ if (handle->ctldev == NULL)
+ return -ENOMEM;
+ } else {
+ handle->ctldev = NULL;
+ }
+ snprintf(idbuf, sizeof(idbuf)-1, "%s %s", id, device);
+ idbuf[sizeof(idbuf)-1] = '\0';
+ handle->id = strdup(idbuf);
+ handle->access = SND_PCM_ACCESS_RW_INTERLEAVED;
+ handle->format = SND_PCM_FORMAT_S16_LE;
+ handle->rate = handle->rate_req = 48000;
+ handle->channels = 2;
+ handle->resample = 0;
+ *_handle = handle;
+ return 0;
+}
+
+static int create_loopback(struct loopback **_handle,
+ struct loopback_handle *play,
+ struct loopback_handle *capt,
+ snd_output_t *output)
+{
+ struct loopback *handle;
+
+ handle = calloc(1, sizeof(*handle));
+ if (handle == NULL)
+ return -ENOMEM;
+ handle->play = play;
+ handle->capt = capt;
+ play->loopback = handle;
+ capt->loopback = handle;
+ handle->latency_req = 0;
+ handle->latency_reqtime = 10000;
+ handle->loop_time = ~0UL;
+ handle->loop_limit = ~0ULL;
+ handle->output = output;
+ handle->state = output;
+#ifdef USE_SAMPLERATE
+ handle->src_enable = 1;
+ handle->src_converter_type = SRC_SINC_BEST_QUALITY;
+#endif
+ *_handle = handle;
+ return 0;
+}
+
+static void set_loop_time(struct loopback *loop, unsigned long loop_time)
+{
+ loop->loop_time = loop_time;
+ loop->loop_limit = loop->capt->rate * loop_time;
+}
+
+static void setscheduler(void)
+{
+ struct sched_param sched_param;
+
+ if (sched_getparam(0, &sched_param) < 0) {
+ logit(LOG_WARNING, "Scheduler getparam failed.\n");
+ return;
+ }
+ sched_param.sched_priority = sched_get_priority_max(SCHED_RR);
+ if (!sched_setscheduler(0, SCHED_RR, &sched_param)) {
+ if (verbose)
+ logit(LOG_WARNING, "Scheduler set to Round Robin with priority %i\n", sched_param.sched_priority);
+ return;
+ }
+ if (verbose)
+ logit(LOG_INFO, "!!!Scheduler set to Round Robin with priority %i FAILED!\n", sched_param.sched_priority);
+}
+
+void help(void)
+{
+ int k;
+ printf(
+"Usage: alsaloop [OPTION]...\n\n"
+"-h,--help help\n"
+"-g,--config configuration file (one line = one job specified)\n"
+"-d,--daemonize daemonize the main process and use syslog for errors\n"
+"-P,--pdevice playback device\n"
+"-C,--cdevice capture device\n"
+"-X,--pctl playback ctl device\n"
+"-Y,--cctl capture ctl device\n"
+"-l,--latency requested latency in frames\n"
+"-t,--tlatency requested latency in usec (1/1000000sec)\n"
+"-f,--format sample format\n"
+"-c,--channels channels\n"
+"-r,--rate rate\n"
+"-n,--resample resample in alsa-lib\n"
+"-A,--samplerate use converter (0=sincbest,1=sincmedium,2=sincfastest,\n"
+" 3=zerohold,4=linear)\n"
+"-B,--buffer buffer size in frames\n"
+"-E,--period period size in frames\n"
+"-s,--seconds duration of loop in seconds\n"
+"-b,--nblock non-block mode (very early process wakeup)\n"
+"-S,--sync sync mode(0=none,1=simple,2=captshift,3=playshift,4=samplerate,\n"
+" 5=auto)\n"
+"-a,--slave stream parameters slave mode (0=auto, 1=on, 2=off)\n"
+"-T,--thread thread number (-1 = create unique)\n"
+"-m,--mixer redirect mixer, argument is:\n"
+" SRC_SLAVE_ID(PLAYBACK)[@DST_SLAVE_ID(CAPTURE)]\n"
+"-O,--ossmixer rescan and redirect oss mixer, argument is:\n"
+" ALSA_ID@OSS_ID (for example: \"Master@VOLUME\")\n"
+"-e,--effect apply an effect (bandpass filter sweep)\n"
+"-v,--verbose verbose mode (more -v means more verbose)\n"
+"-w,--workaround use workaround (serialopen)\n"
+"-U,--xrun xrun profiling\n"
+"-W,--wake process wake timeout in ms\n"
+);
+ printf("\nRecognized sample formats are:");
+ for (k = 0; k < SND_PCM_FORMAT_LAST; ++k) {
+ const char *s = snd_pcm_format_name(k);
+ if (s)
+ printf(" %s", s);
+ }
+ printf("\n\n");
+ printf(
+"Tip #1 (usable 500ms latency, good CPU usage, superb xrun prevention):\n"
+" alsaloop -t 500000\n"
+"Tip #2 (superb 1ms latency, but heavy CPU usage):\n"
+" alsaloop -t 1000\n"
+);
+}
+
+static long timediff(struct timeval t1, struct timeval t2)
+{
+ signed long l;
+
+ t1.tv_sec -= t2.tv_sec;
+ l = (signed long) t1.tv_usec - (signed long) t2.tv_usec;
+ if (l < 0) {
+ t1.tv_sec--;
+ l = 1000000 + l;
+ l %= 1000000;
+ }
+ return (t1.tv_sec * 1000000) + l;
+}
+
+static void add_loop(struct loopback *loop)
+{
+ loopbacks = realloc(loopbacks, (loopbacks_count + 1) *
+ sizeof(struct loopback *));
+ if (loopbacks == NULL) {
+ logit(LOG_CRIT, "No enough memory\n");
+ exit(EXIT_FAILURE);
+ }
+ loopbacks[loopbacks_count++] = loop;
+}
+
+static int init_mixer_control(struct loopback_control *control,
+ char *id)
+{
+ int err;
+
+ err = snd_ctl_elem_id_malloc(&control->id);
+ if (err < 0)
+ return err;
+ err = snd_ctl_elem_info_malloc(&control->info);
+ if (err < 0)
+ return err;
+ err = snd_ctl_elem_value_malloc(&control->value);
+ if (err < 0)
+ return err;
+ err = control_parse_id(id, control->id);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int add_mixers(struct loopback *loop,
+ char **mixers,
+ int mixers_count)
+{
+ struct loopback_mixer *mixer, *last = NULL;
+ char *str1;
+ int err;
+
+ while (mixers_count > 0) {
+ mixer = calloc(1, sizeof(*mixer));
+ if (mixer == NULL)
+ return -ENOMEM;
+ if (last)
+ last->next = mixer;
+ else
+ loop->controls = mixer;
+ last = mixer;
+ str1 = strchr(*mixers, '@');
+ if (str1)
+ *str1 = '\0';
+ err = init_mixer_control(&mixer->src, *mixers);
+ if (err < 0) {
+ logit(LOG_CRIT, "Wrong mixer control ID syntax '%s'\n", *mixers);
+ return -EINVAL;
+ }
+ err = init_mixer_control(&mixer->dst, str1 ? str1 + 1 : *mixers);
+ if (err < 0) {
+ logit(LOG_CRIT, "Wrong mixer control ID syntax '%s'\n", str1 ? str1 + 1 : *mixers);
+ return -EINVAL;
+ }
+ if (str1)
+ *str1 = '@';
+ mixers++;
+ mixers_count--;
+ }
+ return 0;
+}
+
+static int add_oss_mixers(struct loopback *loop,
+ char **mixers,
+ int mixers_count)
+{
+ struct loopback_ossmixer *mixer, *last = NULL;
+ char *str1, *str2;
+
+ while (mixers_count > 0) {
+ mixer = calloc(1, sizeof(*mixer));
+ if (mixer == NULL)
+ return -ENOMEM;
+ if (last)
+ last->next = mixer;
+ else
+ loop->oss_controls = mixer;
+ last = mixer;
+ str1 = strchr(*mixers, ',');
+ if (str1)
+ *str1 = '\0';
+ str2 = strchr(str1 ? str1 + 1 : *mixers, '@');
+ if (str2)
+ *str2 = '\0';
+ mixer->alsa_id = strdup(*mixers);
+ if (str1)
+ mixer->alsa_index = atoi(str1);
+ mixer->oss_id = strdup(str2 ? str2 + 1 : *mixers);
+ if (mixer->alsa_id == NULL || mixer->oss_id == NULL) {
+ logit(LOG_CRIT, "Not enough memory");
+ return -ENOMEM;
+ }
+ if (str1)
+ *str1 = ',';
+ if (str2)
+ *str2 = ',';
+ mixers++;
+ mixers_count--;
+ }
+ return 0;
+}
+
+static int parse_config_file(const char *file, snd_output_t *output);
+
+static int parse_config(int argc, char *argv[], snd_output_t *output,
+ int cmdline)
+{
+ struct option long_option[] =
+ {
+ {"help", 0, NULL, 'h'},
+ {"config", 1, NULL, 'g'},
+ {"daemonize", 0, NULL, 'd'},
+ {"pdevice", 1, NULL, 'P'},
+ {"cdevice", 1, NULL, 'C'},
+ {"pctl", 1, NULL, 'X'},
+ {"cctl", 1, NULL, 'Y'},
+ {"latency", 1, NULL, 'l'},
+ {"tlatency", 1, NULL, 't'},
+ {"format", 1, NULL, 'f'},
+ {"channels", 1, NULL, 'c'},
+ {"rate", 1, NULL, 'r'},
+ {"buffer", 1, NULL, 'B'},
+ {"period", 1, NULL, 'E'},
+ {"seconds", 1, NULL, 's'},
+ {"nblock", 0, NULL, 'b'},
+ {"effect", 0, NULL, 'e'},
+ {"verbose", 0, NULL, 'v'},
+ {"resample", 0, NULL, 'n'},
+ {"samplerate", 1, NULL, 'A'},
+ {"sync", 1, NULL, 'S'},
+ {"slave", 1, NULL, 'a'},
+ {"thread", 1, NULL, 'T'},
+ {"mixer", 1, NULL, 'm'},
+ {"ossmixer", 1, NULL, 'O'},
+ {"workaround", 1, NULL, 'w'},
+ {"xrun", 0, NULL, 'U'},
+ {NULL, 0, NULL, 0},
+ };
+ int err, morehelp;
+ char *arg_config = NULL;
+ char *arg_pdevice = NULL;
+ char *arg_cdevice = NULL;
+ char *arg_pctl = NULL;
+ char *arg_cctl = NULL;
+ unsigned int arg_latency_req = 0;
+ unsigned int arg_latency_reqtime = 10000;
+ snd_pcm_format_t arg_format = SND_PCM_FORMAT_S16_LE;
+ unsigned int arg_channels = 2;
+ unsigned int arg_rate = 48000;
+ snd_pcm_uframes_t arg_buffer_size = 0;
+ snd_pcm_uframes_t arg_period_size = 0;
+ unsigned long arg_loop_time = ~0UL;
+ int arg_nblock = 0;
+ int arg_effect = 0;
+ int arg_resample = 0;
+#ifdef USE_SAMPLERATE
+ int arg_samplerate = SRC_SINC_FASTEST + 1;
+#endif
+ int arg_sync = SYNC_TYPE_AUTO;
+ int arg_slave = SLAVE_TYPE_AUTO;
+ int arg_thread = 0;
+ struct loopback *loop = NULL;
+ char *arg_mixers[MAX_MIXERS];
+ int arg_mixers_count = 0;
+ char *arg_ossmixers[MAX_MIXERS];
+ int arg_ossmixers_count = 0;
+ int arg_xrun = arg_default_xrun;
+ int arg_wake = arg_default_wake;
+
+ morehelp = 0;
+ while (1) {
+ int c;
+ if ((c = getopt_long(argc, argv,
+ "hdg:P:C:X:Y:l:t:F:f:c:r:s:benvA:S:a:m:T:O:w:UW:",
+ long_option, NULL)) < 0)
+ break;
+ switch (c) {
+ case 'h':
+ morehelp++;
+ break;
+ case 'g':
+ arg_config = strdup(optarg);
+ break;
+ case 'd':
+ daemonize = 1;
+ use_syslog = 1;
+ openlog("alsaloop", LOG_NDELAY|LOG_PID, LOG_DAEMON);
+ break;
+ case 'P':
+ arg_pdevice = strdup(optarg);
+ break;
+ case 'C':
+ arg_cdevice = strdup(optarg);
+ break;
+ case 'X':
+ arg_pctl = strdup(optarg);
+ break;
+ case 'Y':
+ arg_cctl = strdup(optarg);
+ break;
+ case 'l':
+ err = atoi(optarg);
+ arg_latency_req = err >= 4 ? err : 4;
+ break;
+ case 't':
+ err = atoi(optarg);
+ arg_latency_reqtime = err >= 500 ? err : 500;
+ break;
+ case 'f':
+ arg_format = snd_pcm_format_value(optarg);
+ if (arg_format == SND_PCM_FORMAT_UNKNOWN) {
+ logit(LOG_WARNING, "Unknown format, setting to default S16_LE\n");
+ arg_format = SND_PCM_FORMAT_S16_LE;
+ }
+ break;
+ case 'c':
+ err = atoi(optarg);
+ arg_channels = err >= 1 && err < 1024 ? err : 1;
+ break;
+ case 'r':
+ err = atoi(optarg);
+ arg_rate = err >= 4000 && err < 200000 ? err : 44100;
+ break;
+ case 'B':
+ err = atoi(optarg);
+ arg_buffer_size = err >= 32 && err < 200000 ? err : 0;
+ break;
+ case 'E':
+ err = atoi(optarg);
+ arg_period_size = err >= 32 && err < 200000 ? err : 0;
+ break;
+ case 's':
+ err = atoi(optarg);
+ arg_loop_time = err >= 1 && err <= 100000 ? err : 30;
+ break;
+ case 'b':
+ arg_nblock = 1;
+ break;
+ case 'e':
+ arg_effect = 1;
+ break;
+ case 'n':
+ arg_resample = 1;
+ break;
+#ifdef USE_SAMPLERATE
+ case 'A':
+ if (strcasecmp(optarg, "sincbest") == 0)
+ arg_samplerate = SRC_SINC_BEST_QUALITY;
+ else if (strcasecmp(optarg, "sincmedium") == 0)
+ arg_samplerate = SRC_SINC_MEDIUM_QUALITY;
+ else if (strcasecmp(optarg, "sincfastest") == 0)
+ arg_samplerate = SRC_SINC_FASTEST;
+ else if (strcasecmp(optarg, "zerohold") == 0)
+ arg_samplerate = SRC_ZERO_ORDER_HOLD;
+ else if (strcasecmp(optarg, "linear") == 0)
+ arg_samplerate = SRC_LINEAR;
+ else
+ arg_samplerate = atoi(optarg);
+ if (arg_samplerate < 0 || arg_samplerate > SRC_LINEAR)
+ arg_sync = SRC_SINC_FASTEST;
+ arg_samplerate += 1;
+ break;
+#endif
+ case 'S':
+ if (strcasecmp(optarg, "samplerate") == 0)
+ arg_sync = SYNC_TYPE_SAMPLERATE;
+ else if (optarg[0] == 'n')
+ arg_sync = SYNC_TYPE_NONE;
+ else if (optarg[0] == 's')
+ arg_sync = SYNC_TYPE_SIMPLE;
+ else if (optarg[0] == 'c')
+ arg_sync = SYNC_TYPE_CAPTRATESHIFT;
+ else if (optarg[0] == 'p')
+ arg_sync = SYNC_TYPE_PLAYRATESHIFT;
+ else if (optarg[0] == 'r')
+ arg_sync = SYNC_TYPE_SAMPLERATE;
+ else
+ arg_sync = atoi(optarg);
+ if (arg_sync < 0 || arg_sync > SYNC_TYPE_LAST)
+ arg_sync = SYNC_TYPE_AUTO;
+ break;
+ case 'a':
+ if (optarg[0] == 'a')
+ arg_slave = SLAVE_TYPE_AUTO;
+ else if (strcasecmp(optarg, "on") == 0)
+ arg_slave = SLAVE_TYPE_ON;
+ else if (strcasecmp(optarg, "off") == 0)
+ arg_slave = SLAVE_TYPE_OFF;
+ else
+ arg_slave = atoi(optarg);
+ if (arg_slave < 0 || arg_slave > SLAVE_TYPE_LAST)
+ arg_slave = SLAVE_TYPE_AUTO;
+ break;
+ case 'T':
+ arg_thread = atoi(optarg);
+ if (arg_thread < 0)
+ arg_thread = 10000000 + loopbacks_count;
+ break;
+ case 'm':
+ if (arg_mixers_count >= MAX_MIXERS) {
+ logit(LOG_CRIT, "Maximum redirected mixer controls reached (max %i)\n", (int)MAX_MIXERS);
+ exit(EXIT_FAILURE);
+ }
+ arg_mixers[arg_mixers_count++] = optarg;
+ break;
+ case 'O':
+ if (arg_ossmixers_count >= MAX_MIXERS) {
+ logit(LOG_CRIT, "Maximum redirected mixer controls reached (max %i)\n", (int)MAX_MIXERS);
+ exit(EXIT_FAILURE);
+ }
+ arg_ossmixers[arg_ossmixers_count++] = optarg;
+ break;
+ case 'v':
+ verbose++;
+ break;
+ case 'w':
+ if (strcasecmp(optarg, "serialopen") == 0)
+ workarounds |= WORKAROUND_SERIALOPEN;
+ break;
+ case 'U':
+ arg_xrun = 1;
+ if (cmdline)
+ arg_default_xrun = 1;
+ break;
+ case 'W':
+ arg_wake = atoi(optarg);
+ if (cmdline)
+ arg_default_wake = arg_wake;
+ break;
+ }
+ }
+
+ if (morehelp) {
+ help();
+ exit(EXIT_SUCCESS);
+ }
+ if (arg_config == NULL) {
+ struct loopback_handle *play;
+ struct loopback_handle *capt;
+ err = create_loopback_handle(&play, arg_pdevice, arg_pctl, "playback");
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to create playback handle.\n");
+ exit(EXIT_FAILURE);
+ }
+ err = create_loopback_handle(&capt, arg_cdevice, arg_cctl, "capture");
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to create capture handle.\n");
+ exit(EXIT_FAILURE);
+ }
+ err = create_loopback(&loop, play, capt, output);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to create loopback handle.\n");
+ exit(EXIT_FAILURE);
+ }
+ play->format = capt->format = arg_format;
+ play->rate = play->rate_req = capt->rate = capt->rate_req = arg_rate;
+ play->channels = capt->channels = arg_channels;
+ play->buffer_size_req = capt->buffer_size_req = arg_buffer_size;
+ play->period_size_req = capt->period_size_req = arg_period_size;
+ play->resample = capt->resample = arg_resample;
+ play->nblock = capt->nblock = arg_nblock ? 1 : 0;
+ loop->latency_req = arg_latency_req;
+ loop->latency_reqtime = arg_latency_reqtime;
+ loop->sync = arg_sync;
+ loop->slave = arg_slave;
+ loop->thread = arg_thread;
+ loop->xrun = arg_xrun;
+ loop->wake = arg_wake;
+ err = add_mixers(loop, arg_mixers, arg_mixers_count);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to add mixer controls.\n");
+ exit(EXIT_FAILURE);
+ }
+ err = add_oss_mixers(loop, arg_ossmixers, arg_ossmixers_count);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to add ossmixer controls.\n");
+ exit(EXIT_FAILURE);
+ }
+#ifdef USE_SAMPLERATE
+ loop->src_enable = arg_samplerate > 0;
+ if (loop->src_enable)
+ loop->src_converter_type = arg_samplerate - 1;
+#endif
+ set_loop_time(loop, arg_loop_time);
+ add_loop(loop);
+ return 0;
+ }
+
+ return parse_config_file(arg_config, output);
+}
+
+static int parse_config_file(const char *file, snd_output_t *output)
+{
+ FILE *fp;
+ char line[2048], word[2048];
+ char *str, *ptr;
+ int argc, c, err = 0;
+ char **argv;
+
+ fp = fopen(file, "r");
+ if (fp == NULL) {
+ logit(LOG_CRIT, "Unable to open file '%s': %s\n", file, strerror(errno));
+ return -EIO;
+ }
+ while (!feof(fp)) {
+ if (fgets(line, sizeof(line)-1, fp) == NULL)
+ break;
+ line[sizeof(line)-1] = '\0';
+ my_argv = realloc(my_argv, my_argc + MAX_ARGS * sizeof(char *));
+ if (my_argv == NULL)
+ return -ENOMEM;
+ argv = my_argv + my_argc;
+ argc = 0;
+ argv[argc++] = strdup("<prog>");
+ my_argc++;
+ str = line;
+ while (*str) {
+ ptr = word;
+ while (*str && (*str == ' ' || *str < ' '))
+ str++;
+ if (*str == '#')
+ goto __next;
+ if (*str == '\'' || *str == '\"') {
+ c = *str++;
+ while (*str && *str != c)
+ *ptr++ = *str++;
+ if (*str == c)
+ str++;
+ } else {
+ while (*str && *str != ' ' && *str != '\t')
+ *ptr++ = *str++;
+ }
+ if (ptr != word) {
+ if (*(ptr-1) == '\n')
+ ptr--;
+ *ptr = '\0';
+ if (argc >= MAX_ARGS) {
+ logit(LOG_CRIT, "Too many arguments.");
+ goto __error;
+ }
+ argv[argc++] = strdup(word);
+ my_argc++;
+ }
+ }
+ /* erase runtime variables for getopt */
+ optarg = NULL;
+ optind = opterr = 1;
+ optopt = '?';
+
+ err = parse_config(argc, argv, output, 0);
+ __next:
+ if (err < 0)
+ break;
+ err = 0;
+ }
+ __error:
+ fclose(fp);
+
+ return err;
+}
+
+static void thread_job1(void *_data)
+{
+ struct loopback_thread *thread = _data;
+ snd_output_t *output = thread->output;
+ struct pollfd *pfds = NULL;
+ int pfds_count = 0;
+ int i, j, err, wake = 1000000;
+
+ setscheduler();
+
+ for (i = 0; i < thread->loopbacks_count; i++) {
+ err = pcmjob_init(thread->loopbacks[i]);
+ if (err < 0) {
+ logit(LOG_CRIT, "Loopback initialization failure.\n");
+ my_exit(thread, EXIT_FAILURE);
+ }
+ }
+ for (i = 0; i < thread->loopbacks_count; i++) {
+ err = pcmjob_start(thread->loopbacks[i]);
+ if (err < 0) {
+ logit(LOG_CRIT, "Loopback start failure.\n");
+ my_exit(thread, EXIT_FAILURE);
+ }
+ pfds_count += thread->loopbacks[i]->pollfd_count;
+ j = thread->loopbacks[i]->wake;
+ if (j > 0 && j < wake)
+ wake = j;
+ }
+ if (wake >= 1000000)
+ wake = -1;
+ pfds = calloc(pfds_count, sizeof(struct pollfd));
+ if (pfds == NULL || pfds_count <= 0) {
+ logit(LOG_CRIT, "Poll FDs allocation failed.\n");
+ my_exit(thread, EXIT_FAILURE);
+ }
+ while (!quit) {
+ struct timeval tv1, tv2;
+ for (i = j = 0; i < thread->loopbacks_count; i++) {
+ err = pcmjob_pollfds_init(thread->loopbacks[i], &pfds[j]);
+ if (err < 0) {
+ logit(LOG_CRIT, "Poll FD initialization failed.\n");
+ my_exit(thread, EXIT_FAILURE);
+ }
+ j += err;
+ }
+ if (verbose > 10)
+ gettimeofday(&tv1, NULL);
+ err = poll(pfds, j, wake);
+ if (err < 0)
+ err = -errno;
+ if (verbose > 10) {
+ gettimeofday(&tv2, NULL);
+ snd_output_printf(output, "pool took %lius\n", timediff(tv2, tv1));
+ }
+ if (err < 0) {
+ if (err == -EINTR || err == -ERESTART)
+ continue;
+ logit(LOG_CRIT, "Poll failed: %s\n", strerror(-err));
+ my_exit(thread, EXIT_FAILURE);
+ }
+ for (i = j = 0; i < thread->loopbacks_count; i++) {
+ struct loopback *loop = thread->loopbacks[i];
+ if (j < loop->active_pollfd_count) {
+ err = pcmjob_pollfds_handle(loop, &pfds[j]);
+ if (err < 0) {
+ logit(LOG_CRIT, "pcmjob failed.\n");
+ exit(EXIT_FAILURE);
+ }
+ }
+ j += loop->active_pollfd_count;
+ }
+ }
+
+ my_exit(thread, EXIT_SUCCESS);
+}
+
+static void thread_job(struct loopback_thread *thread)
+{
+ if (!thread->threaded) {
+ thread_job1(thread);
+ return;
+ }
+ pthread_create(&thread->thread, NULL, (void *) &thread_job1,
+ (void *) thread);
+}
+
+static void send_to_all(int sig)
+{
+ struct loopback_thread *thread;
+ int i;
+
+ for (i = 0; i < threads_count; i++) {
+ thread = &threads[i];
+ if (thread->threaded)
+ pthread_kill(thread->thread, sig);
+ }
+}
+
+static void signal_handler(int sig)
+{
+ quit = 1;
+ send_to_all(SIGUSR2);
+}
+
+static void signal_handler_state(int sig)
+{
+ pthread_t self = pthread_self();
+ struct loopback_thread *thread;
+ int i, j;
+
+ if (pthread_equal(main_job, self))
+ send_to_all(SIGUSR1);
+ for (i = 0; i < threads_count; i++) {
+ thread = &threads[i];
+ if (thread->thread == self) {
+ for (j = 0; j < thread->loopbacks_count; j++)
+ pcmjob_state(thread->loopbacks[j]);
+ }
+ }
+ signal(sig, signal_handler_state);
+}
+
+static void signal_handler_ignore(int sig)
+{
+ signal(sig, signal_handler_ignore);
+}
+
+int main(int argc, char *argv[])
+{
+ snd_output_t *output;
+ int i, j, k, l, err;
+
+ err = snd_output_stdio_attach(&output, stdout, 0);
+ if (err < 0) {
+ logit(LOG_CRIT, "Output failed: %s\n", snd_strerror(err));
+ exit(EXIT_FAILURE);
+ }
+ err = parse_config(argc, argv, output, 1);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to parse arguments or configuration...\n");
+ exit(EXIT_FAILURE);
+ }
+ while (my_argc > 0)
+ free(my_argv[--my_argc]);
+ free(my_argv);
+
+ if (loopbacks_count <= 0) {
+ logit(LOG_CRIT, "No loopback defined...\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (daemonize) {
+ if (daemon(0, 0) < 0) {
+ logit(LOG_CRIT, "daemon() failed: %s\n", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ i = fork();
+ if (i < 0) {
+ logit(LOG_CRIT, "fork() failed: %s\n", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ if (i > 0) {
+ /* wait(&i); */
+ exit(EXIT_SUCCESS);
+ }
+ }
+
+ /* we must sort thread IDs */
+ j = -1;
+ do {
+ k = 0x7fffffff;
+ for (i = 0; i < loopbacks_count; i++) {
+ if (loopbacks[i]->thread < k &&
+ loopbacks[i]->thread > j)
+ k = loopbacks[i]->thread;
+ }
+ j++;
+ for (i = 0; i < loopbacks_count; i++) {
+ if (loopbacks[i]->thread == k)
+ loopbacks[i]->thread = j;
+ }
+ } while (k != 0x7fffffff);
+ /* fix maximum thread id */
+ for (i = 0, j = -1; i < loopbacks_count; i++) {
+ if (loopbacks[i]->thread > j)
+ j = loopbacks[i]->thread;
+ }
+ j += 1;
+ threads = calloc(1, sizeof(struct loopback_thread) * j);
+ if (threads == NULL) {
+ logit(LOG_CRIT, "No enough memory\n");
+ exit(EXIT_FAILURE);
+ }
+ /* sort all threads */
+ for (k = 0; k < j; k++) {
+ for (i = l = 0; i < loopbacks_count; i++)
+ if (loopbacks[i]->thread == k)
+ l++;
+ threads[k].loopbacks = malloc(l * sizeof(struct loopback *));
+ threads[k].loopbacks_count = l;
+ threads[k].output = output;
+ threads[k].threaded = j > 1;
+ for (i = l = 0; i < loopbacks_count; i++)
+ if (loopbacks[i]->thread == k)
+ threads[k].loopbacks[l++] = loopbacks[i];
+ }
+ threads_count = j;
+ main_job = pthread_self();
+
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+ signal(SIGABRT, signal_handler);
+ signal(SIGUSR1, signal_handler_state);
+ signal(SIGUSR2, signal_handler_ignore);
+
+ for (k = 0; k < threads_count; k++)
+ thread_job(&threads[k]);
+
+ if (j > 1) {
+ for (k = 0; k < threads_count; k++)
+ pthread_join(threads[k].thread, NULL);
+ }
+
+ if (use_syslog)
+ closelog();
+ exit(EXIT_SUCCESS);
+}
diff --git a/alsaloop/alsaloop.h b/alsaloop/alsaloop.h
new file mode 100644
index 0000000..8dc445a
--- /dev/null
+++ b/alsaloop/alsaloop.h
@@ -0,0 +1,218 @@
+/*
+ * A simple PCM loopback utility
+ * Copyright (c) 2010 by Jaroslav Kysela <perex@perex.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "aconfig.h"
+#ifdef HAVE_SAMPLERATE_H
+#define USE_SAMPLERATE
+#include <samplerate.h>
+#else
+enum {
+ SRC_SINC_BEST_QUALITY = 0,
+ SRC_SINC_MEDIUM_QUALITY = 1,
+ SRC_SINC_FASTEST = 2,
+ SRC_ZERO_ORDER_HOLD = 3,
+ SRC_LINEAR = 4
+};
+#endif
+
+#define MAX_ARGS 128
+#define MAX_MIXERS 64
+
+#if 0
+#define FILE_PWRITE "/tmp/alsaloop.praw"
+#define FILE_CWRITE "/tmp/alsaloop.craw"
+#endif
+
+#define WORKAROUND_SERIALOPEN (1<<0)
+
+typedef enum _sync_type {
+ SYNC_TYPE_NONE = 0,
+ SYNC_TYPE_SIMPLE, /* add or remove samples */
+ SYNC_TYPE_CAPTRATESHIFT,
+ SYNC_TYPE_PLAYRATESHIFT,
+ SYNC_TYPE_SAMPLERATE,
+ SYNC_TYPE_AUTO, /* order: CAPTRATESHIFT, PLAYRATESHIFT, */
+ /* SAMPLERATE, SIMPLE */
+ SYNC_TYPE_LAST = SYNC_TYPE_AUTO
+} sync_type_t;
+
+typedef enum _slave_type {
+ SLAVE_TYPE_AUTO = 0,
+ SLAVE_TYPE_ON = 1,
+ SLAVE_TYPE_OFF = 2,
+ SLAVE_TYPE_LAST = SLAVE_TYPE_OFF
+} slave_type_t;
+
+struct loopback_control {
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_info_t *info;
+ snd_ctl_elem_value_t *value;
+};
+
+struct loopback_mixer {
+ unsigned int skip:1;
+ struct loopback_control src;
+ struct loopback_control dst;
+ struct loopback_mixer *next;
+};
+
+struct loopback_ossmixer {
+ unsigned int skip:1;
+ const char *alsa_id;
+ int alsa_index;
+ const char *oss_id;
+ struct loopback_ossmixer *next;
+};
+
+struct loopback_handle {
+ struct loopback *loopback;
+ char *device;
+ char *ctldev;
+ char *id;
+ int card_number;
+ snd_pcm_t *handle;
+ snd_pcm_access_t access;
+ snd_pcm_format_t format;
+ unsigned int rate;
+ unsigned int rate_req;
+ unsigned int channels;
+ unsigned int buffer_size;
+ unsigned int period_size;
+ snd_pcm_uframes_t avail_min;
+ unsigned int buffer_size_req;
+ unsigned int period_size_req;
+ unsigned int frame_size;
+ unsigned int resample:1; /* do resample */
+ unsigned int nblock:1; /* do block (period size) transfers */
+ unsigned int xrun_pending:1;
+ unsigned int pollfd_count;
+ /* I/O job */
+ char *buf; /* I/O buffer */
+ snd_pcm_uframes_t buf_pos; /* I/O position */
+ snd_pcm_uframes_t buf_count; /* filled samples */
+ snd_pcm_uframes_t buf_size; /* buffer size in frames */
+ snd_pcm_uframes_t buf_over; /* capture buffer overflow */
+ /* statistics */
+ snd_pcm_uframes_t max;
+ unsigned long long counter;
+ unsigned long sync_point; /* in samples */
+ snd_pcm_sframes_t last_delay;
+ double pitch;
+ snd_pcm_uframes_t total_queued;
+ /* control */
+ snd_ctl_t *ctl;
+ unsigned int ctl_pollfd_count;
+ snd_ctl_elem_value_t *ctl_notify;
+ snd_ctl_elem_value_t *ctl_rate_shift;
+ snd_ctl_elem_value_t *ctl_active;
+ snd_ctl_elem_value_t *ctl_format;
+ snd_ctl_elem_value_t *ctl_rate;
+ snd_ctl_elem_value_t *ctl_channels;
+};
+
+struct loopback {
+ char *id;
+ struct loopback_handle *capt;
+ struct loopback_handle *play;
+ snd_pcm_uframes_t latency; /* final latency in frames */
+ unsigned int latency_req; /* in frames */
+ unsigned int latency_reqtime; /* in us */
+ unsigned long loop_time; /* ~0 = unlimited (in seconds) */
+ unsigned long long loop_limit; /* ~0 = unlimited (in frames) */
+ snd_output_t *output;
+ snd_output_t *state;
+ int pollfd_count;
+ int active_pollfd_count;
+ unsigned int linked:1; /* linked streams */
+ unsigned int reinit:1;
+ unsigned int running:1;
+ unsigned int stop_pending:1;
+ snd_pcm_uframes_t stop_count;
+ sync_type_t sync; /* type of sync */
+ slave_type_t slave;
+ int thread; /* thread number */
+ unsigned int wake;
+ /* statistics */
+ double pitch;
+ double pitch_delta;
+ snd_pcm_sframes_t pitch_diff;
+ snd_pcm_sframes_t pitch_diff_min;
+ snd_pcm_sframes_t pitch_diff_max;
+ unsigned int total_queued_count;
+ snd_timestamp_t tstamp_start;
+ snd_timestamp_t tstamp_end;
+ /* xrun profiling */
+ unsigned int xrun:1; /* xrun profiling */
+ snd_timestamp_t xrun_last_update;
+ snd_timestamp_t xrun_last_wake0;
+ snd_timestamp_t xrun_last_wake;
+ snd_timestamp_t xrun_last_check0;
+ snd_timestamp_t xrun_last_check;
+ snd_pcm_sframes_t xrun_last_pdelay;
+ snd_pcm_sframes_t xrun_last_cdelay;
+ snd_pcm_uframes_t xrun_buf_pcount;
+ snd_pcm_uframes_t xrun_buf_ccount;
+ unsigned int xrun_out_frames;
+ long xrun_max_proctime;
+ double xrun_max_missing;
+ /* control mixer */
+ struct loopback_mixer *controls;
+ struct loopback_ossmixer *oss_controls;
+ /* sample rate */
+ unsigned int use_samplerate:1;
+#ifdef USE_SAMPLERATE
+ unsigned int src_enable:1;
+ int src_converter_type;
+ SRC_STATE *src_state;
+ SRC_DATA src_data;
+ unsigned int src_out_frames;
+#endif
+#ifdef FILE_CWRITE
+ FILE *cfile;
+#endif
+#ifdef FILE_PWRITE
+ FILE *pfile;
+#endif
+};
+
+extern int verbose;
+extern int workarounds;
+extern int use_syslog;
+
+#define logit(priority, fmt, args...) do { \
+ if (use_syslog) \
+ syslog(priority, fmt, ##args); \
+ else \
+ fprintf(stderr, fmt, ##args); \
+} while (0)
+
+int pcmjob_init(struct loopback *loop);
+int pcmjob_done(struct loopback *loop);
+int pcmjob_start(struct loopback *loop);
+int pcmjob_stop(struct loopback *loop);
+int pcmjob_pollfds_init(struct loopback *loop, struct pollfd *fds);
+int pcmjob_pollfds_handle(struct loopback *loop, struct pollfd *fds);
+void pcmjob_state(struct loopback *loop);
+
+int control_parse_id(const char *str, snd_ctl_elem_id_t *id);
+int control_id_match(snd_ctl_elem_id_t *id1, snd_ctl_elem_id_t *id2);
+int control_init(struct loopback *loop);
+int control_done(struct loopback *loop);
+int control_event(struct loopback_handle *lhandle, snd_ctl_event_t *ev);
diff --git a/alsaloop/control.c b/alsaloop/control.c
new file mode 100644
index 0000000..8383d79
--- /dev/null
+++ b/alsaloop/control.c
@@ -0,0 +1,424 @@
+/*
+ * A simple PCM loopback utility
+ * Copyright (c) 2010 by Jaroslav Kysela <perex@perex.cz>
+ *
+ * Author: Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <ctype.h>
+#include <syslog.h>
+#include <alsa/asoundlib.h>
+#include "alsaloop.h"
+
+static char *id_str(snd_ctl_elem_id_t *id)
+{
+ static char str[128];
+
+ sprintf(str, "%i,%s,%i,%i,%s,%i",
+ snd_ctl_elem_id_get_numid(id),
+ snd_ctl_elem_iface_name(snd_ctl_elem_id_get_interface(id)),
+ snd_ctl_elem_id_get_device(id),
+ snd_ctl_elem_id_get_subdevice(id),
+ snd_ctl_elem_id_get_name(id),
+ snd_ctl_elem_id_get_index(id));
+ return str;
+}
+
+int control_parse_id(const char *str, snd_ctl_elem_id_t *id)
+{
+ int c, size, numid;
+ char *ptr;
+
+ while (*str == ' ' || *str == '\t')
+ str++;
+ if (!(*str))
+ return -EINVAL;
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER); /* default */
+ while (*str) {
+ if (!strncasecmp(str, "numid=", 6)) {
+ str += 6;
+ numid = atoi(str);
+ if (numid <= 0) {
+ logit(LOG_CRIT, "Invalid numid %d\n", numid);
+ return -EINVAL;
+ }
+ snd_ctl_elem_id_set_numid(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ } else if (!strncasecmp(str, "iface=", 6)) {
+ str += 6;
+ if (!strncasecmp(str, "card", 4)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_CARD);
+ str += 4;
+ } else if (!strncasecmp(str, "mixer", 5)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER);
+ str += 5;
+ } else if (!strncasecmp(str, "pcm", 3)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_PCM);
+ str += 3;
+ } else if (!strncasecmp(str, "rawmidi", 7)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_RAWMIDI);
+ str += 7;
+ } else if (!strncasecmp(str, "timer", 5)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_TIMER);
+ str += 5;
+ } else if (!strncasecmp(str, "sequencer", 9)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_SEQUENCER);
+ str += 9;
+ } else {
+ return -EINVAL;
+ }
+ } else if (!strncasecmp(str, "name=", 5)) {
+ char buf[64];
+ str += 5;
+ ptr = buf;
+ size = 0;
+ if (*str == '\'' || *str == '\"') {
+ c = *str++;
+ while (*str && *str != c) {
+ if (size < (int)sizeof(buf)) {
+ *ptr++ = *str;
+ size++;
+ }
+ str++;
+ }
+ if (*str == c)
+ str++;
+ } else {
+ while (*str && *str != ',') {
+ if (size < (int)sizeof(buf)) {
+ *ptr++ = *str;
+ size++;
+ }
+ str++;
+ }
+ }
+ *ptr = '\0';
+ snd_ctl_elem_id_set_name(id, buf);
+ } else if (!strncasecmp(str, "index=", 6)) {
+ str += 6;
+ snd_ctl_elem_id_set_index(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ } else if (!strncasecmp(str, "device=", 7)) {
+ str += 7;
+ snd_ctl_elem_id_set_device(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ } else if (!strncasecmp(str, "subdevice=", 10)) {
+ str += 10;
+ snd_ctl_elem_id_set_subdevice(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ }
+ if (*str == ',') {
+ str++;
+ } else {
+ if (*str)
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+int control_id_match(snd_ctl_elem_id_t *id1, snd_ctl_elem_id_t *id2)
+{
+ if (snd_ctl_elem_id_get_interface(id1) !=
+ snd_ctl_elem_id_get_interface(id2))
+ return 0;
+ if (snd_ctl_elem_id_get_device(id1) !=
+ snd_ctl_elem_id_get_device(id2))
+ return 0;
+ if (snd_ctl_elem_id_get_subdevice(id1) !=
+ snd_ctl_elem_id_get_subdevice(id2))
+ return 0;
+ if (strcmp(snd_ctl_elem_id_get_name(id1),
+ snd_ctl_elem_id_get_name(id2)) != 0)
+ return 0;
+ if (snd_ctl_elem_id_get_index(id1) !=
+ snd_ctl_elem_id_get_index(id2))
+ return 0;
+ return 1;
+}
+
+static int control_init1(struct loopback_handle *lhandle,
+ struct loopback_control *ctl)
+{
+ int err;
+
+ snd_ctl_elem_info_set_id(ctl->info, ctl->id);
+ snd_ctl_elem_value_set_id(ctl->value, ctl->id);
+ if (lhandle->ctl == NULL) {
+ logit(LOG_WARNING, "Unable to read control info for '%s'\n", id_str(ctl->id));
+ return -EIO;
+ }
+ err = snd_ctl_elem_info(lhandle->ctl, ctl->info);
+ if (err < 0) {
+ logit(LOG_WARNING, "Unable to read control info '%s': %s\n", id_str(ctl->id), snd_strerror(err));
+ return err;
+ }
+ err = snd_ctl_elem_read(lhandle->ctl, ctl->value);
+ if (err < 0) {
+ logit(LOG_WARNING, "Unable to read control value (init1) '%s': %s\n", id_str(ctl->id), snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+static int copy_value(struct loopback_control *dst,
+ struct loopback_control *src)
+{
+ snd_ctl_elem_type_t type;
+ unsigned int count;
+ int i;
+
+ type = snd_ctl_elem_info_get_type(dst->info);
+ count = snd_ctl_elem_info_get_count(dst->info);
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ for (i = 0; i < count; i++)
+ snd_ctl_elem_value_set_boolean(dst->value,
+ i, snd_ctl_elem_value_get_boolean(src->value, i));
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ for (i = 0; i < count; i++) {
+ snd_ctl_elem_value_set_integer(dst->value,
+ i, snd_ctl_elem_value_get_integer(src->value, i));
+ }
+ break;
+ default:
+ logit(LOG_CRIT, "Unable to copy control value for type %s\n", snd_ctl_elem_type_name(type));
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int oss_set(struct loopback *loop,
+ struct loopback_ossmixer *ossmix,
+ int enable)
+{
+ char buf[128], file[128];
+ int fd;
+
+ if (loop->capt->card_number < 0)
+ return 0;
+ if (!enable) {
+ sprintf(buf, "%s \"\" 0\n", ossmix->oss_id);
+ } else {
+ sprintf(buf, "%s \"%s\" %i\n", ossmix->oss_id, ossmix->alsa_id, ossmix->alsa_index);
+ }
+ sprintf(file, "/proc/asound/card%i/oss_mixer", loop->capt->card_number);
+ if (verbose)
+ snd_output_printf(loop->output, "%s: Initialize OSS volume %s: %s", loop->id, file, buf);
+ fd = open(file, O_WRONLY);
+ if (fd >= 0 && write(fd, buf, strlen(buf)) == strlen(buf)) {
+ close(fd);
+ return 0;
+ }
+ if (fd >= 0)
+ close(fd);
+ logit(LOG_INFO, "%s: Unable to initialize OSS Mixer ID '%s'\n", loop->id, ossmix->oss_id);
+ return -1;
+}
+
+static int control_init2(struct loopback *loop,
+ struct loopback_mixer *mix)
+{
+ snd_ctl_elem_type_t type;
+ unsigned int count;
+ int err;
+
+ snd_ctl_elem_info_copy(mix->dst.info, mix->src.info);
+ snd_ctl_elem_info_set_id(mix->dst.info, mix->dst.id);
+ snd_ctl_elem_value_clear(mix->dst.value);
+ snd_ctl_elem_value_set_id(mix->dst.value, mix->dst.id);
+ type = snd_ctl_elem_info_get_type(mix->dst.info);
+ count = snd_ctl_elem_info_get_count(mix->dst.info);
+ snd_ctl_elem_remove(loop->capt->ctl, mix->dst.id);
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ err = snd_ctl_elem_add_boolean(loop->capt->ctl,
+ mix->dst.id, count);
+ copy_value(&mix->dst, &mix->src);
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ err = snd_ctl_elem_add_integer(loop->capt->ctl,
+ mix->dst.id, count,
+ snd_ctl_elem_info_get_min(mix->dst.info),
+ snd_ctl_elem_info_get_max(mix->dst.info),
+ snd_ctl_elem_info_get_step(mix->dst.info));
+ copy_value(&mix->dst, &mix->src);
+ break;
+ default:
+ logit(LOG_CRIT, "Unable to handle control type %s\n", snd_ctl_elem_type_name(type));
+ err = -EINVAL;
+ break;
+ }
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to create control '%s': %s\n", id_str(mix->dst.id), snd_strerror(err));
+ return err;
+ }
+ err = snd_ctl_elem_unlock(loop->capt->ctl, mix->dst.id);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to unlock control info '%s': %s\n", id_str(mix->dst.id), snd_strerror(err));
+ return err;
+ }
+ err = snd_ctl_elem_info(loop->capt->ctl, mix->dst.info);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to read control info '%s': %s\n", id_str(mix->dst.id), snd_strerror(err));
+ return err;
+ }
+ if (snd_ctl_elem_info_is_tlv_writable(mix->dst.info)) {
+ unsigned int tlv[64];
+ err = snd_ctl_elem_tlv_read(loop->play->ctl,
+ mix->src.id,
+ tlv, sizeof(tlv));
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to read TLV for '%s': %s\n", id_str(mix->src.id), snd_strerror(err));
+ tlv[0] = tlv[1] = 0;
+ }
+ err = snd_ctl_elem_tlv_write(loop->capt->ctl,
+ mix->dst.id,
+ tlv);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to write TLV for '%s': %s\n", id_str(mix->src.id), snd_strerror(err));
+ return err;
+ }
+ }
+ err = snd_ctl_elem_write(loop->capt->ctl, mix->dst.value);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to write control value '%s': %s\n", id_str(mix->dst.id), snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+int control_init(struct loopback *loop)
+{
+ struct loopback_mixer *mix;
+ struct loopback_ossmixer *ossmix;
+ int err;
+
+ for (ossmix = loop->oss_controls; ossmix; ossmix = ossmix->next)
+ oss_set(loop, ossmix, 0);
+ for (mix = loop->controls; mix; mix = mix->next) {
+ err = control_init1(loop->play, &mix->src);
+ if (err < 0) {
+ logit(LOG_WARNING, "%s: Disabling playback control '%s'\n", loop->id, id_str(mix->src.id));
+ mix->skip = 1;
+ continue;
+ }
+ err = control_init2(loop, mix);
+ if (err < 0)
+ return err;
+ }
+ for (ossmix = loop->oss_controls; ossmix; ossmix = ossmix->next) {
+ err = oss_set(loop, ossmix, 1);
+ if (err < 0) {
+ ossmix->skip = 1;
+ logit(LOG_WARNING, "%s: Disabling OSS mixer ID '%s'\n", loop->id, ossmix->oss_id);
+ }
+ }
+ return 0;
+}
+
+int control_done(struct loopback *loop)
+{
+ struct loopback_mixer *mix;
+ struct loopback_ossmixer *ossmix;
+ int err;
+
+ if (loop->capt->ctl == NULL)
+ return 0;
+ for (ossmix = loop->oss_controls; ossmix; ossmix = ossmix->next) {
+ err = oss_set(loop, ossmix, 0);
+ if (err < 0)
+ logit(LOG_WARNING, "%s: Unable to remove OSS control '%s'\n", loop->id, ossmix->oss_id);
+ }
+ for (mix = loop->controls; mix; mix = mix->next) {
+ if (mix->skip)
+ continue;
+ err = snd_ctl_elem_remove(loop->capt->ctl, mix->dst.id);
+ if (err < 0)
+ logit(LOG_WARNING, "%s: Unable to remove control '%s': %s\n", loop->id, id_str(mix->dst.id), snd_strerror(err));
+ }
+ return 0;
+}
+
+static int control_event1(struct loopback *loop,
+ struct loopback_mixer *mix,
+ snd_ctl_event_t *ev,
+ int capture)
+{
+ unsigned int mask = snd_ctl_event_elem_get_mask(ev);
+ int err;
+
+ if (mask == SND_CTL_EVENT_MASK_REMOVE)
+ return 0;
+ if ((mask & SND_CTL_EVENT_MASK_VALUE) == 0)
+ return 0;
+ if (!capture) {
+ snd_ctl_elem_value_set_id(mix->src.value, mix->src.id);
+ err = snd_ctl_elem_read(loop->play->ctl, mix->src.value);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to read control value (event1) '%s': %s\n", id_str(mix->src.id), snd_strerror(err));
+ return err;
+ }
+ copy_value(&mix->dst, &mix->src);
+ err = snd_ctl_elem_write(loop->capt->ctl, mix->dst.value);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to write control value (event1) '%s': %s\n", id_str(mix->dst.id), snd_strerror(err));
+ return err;
+ }
+ } else {
+ err = snd_ctl_elem_read(loop->capt->ctl, mix->dst.value);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to read control value (event2) '%s': %s\n", id_str(mix->dst.id), snd_strerror(err));
+ return err;
+ }
+ copy_value(&mix->src, &mix->dst);
+ err = snd_ctl_elem_write(loop->play->ctl, mix->src.value);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to write control value (event2) '%s': %s\n", id_str(mix->src.id), snd_strerror(err));
+ return err;
+ }
+ }
+ return 0;
+}
+
+int control_event(struct loopback_handle *lhandle, snd_ctl_event_t *ev)
+{
+ snd_ctl_elem_id_t *id2;
+ struct loopback_mixer *mix;
+ int capt = lhandle == lhandle->loopback->capt;
+ int err;
+
+ snd_ctl_elem_id_alloca(&id2);
+ snd_ctl_event_elem_get_id(ev, id2);
+ for (mix = lhandle->loopback->controls; mix; mix = mix->next) {
+ if (mix->skip)
+ continue;
+ if (control_id_match(id2, capt ? mix->dst.id : mix->src.id)) {
+ err = control_event1(lhandle->loopback, mix, ev, capt);
+ if (err < 0)
+ return err;
+ }
+ }
+ return 0;
+}
diff --git a/alsaloop/pcmjob.c b/alsaloop/pcmjob.c
new file mode 100644
index 0000000..139b6fd
--- /dev/null
+++ b/alsaloop/pcmjob.c
@@ -0,0 +1,1966 @@
+/*
+ * A simple PCM loopback utility
+ * Copyright (c) 2010 by Jaroslav Kysela <perex@perex.cz>
+ *
+ * Author: Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sched.h>
+#include <errno.h>
+#include <getopt.h>
+#include <alsa/asoundlib.h>
+#include <sys/time.h>
+#include <math.h>
+#include <syslog.h>
+#include <pthread.h>
+#include "alsaloop.h"
+
+#define XRUN_PROFILE_UNKNOWN (-10000000)
+
+static int set_rate_shift(struct loopback_handle *lhandle, double pitch);
+static int get_rate(struct loopback_handle *lhandle);
+
+#define SYNCTYPE(v) [SYNC_TYPE_##v] = #v
+
+static const char *sync_types[] = {
+ SYNCTYPE(NONE),
+ SYNCTYPE(SIMPLE),
+ SYNCTYPE(CAPTRATESHIFT),
+ SYNCTYPE(PLAYRATESHIFT),
+ SYNCTYPE(SAMPLERATE),
+ SYNCTYPE(AUTO)
+};
+
+#define SRCTYPE(v) [SRC_##v] = "SRC_" #v
+
+#ifdef USE_SAMPLERATE
+static const char *src_types[] = {
+ SRCTYPE(SINC_BEST_QUALITY),
+ SRCTYPE(SINC_MEDIUM_QUALITY),
+ SRCTYPE(SINC_FASTEST),
+ SRCTYPE(ZERO_ORDER_HOLD),
+ SRCTYPE(LINEAR)
+};
+#endif
+
+static pthread_mutex_t pcm_open_mutex =
+ PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP;
+
+static inline void pcm_open_lock(void)
+{
+ if (workarounds & WORKAROUND_SERIALOPEN)
+ pthread_mutex_lock(&pcm_open_mutex);
+}
+
+static inline void pcm_open_unlock(void)
+{
+ if (workarounds & WORKAROUND_SERIALOPEN)
+ pthread_mutex_unlock(&pcm_open_mutex);
+}
+
+static inline snd_pcm_uframes_t get_whole_latency(struct loopback *loop)
+{
+ return loop->latency;
+}
+
+static inline unsigned long long
+ frames_to_time(unsigned int rate,
+ snd_pcm_uframes_t frames)
+{
+ return (frames * 1000000ULL) / rate;
+}
+
+static inline snd_pcm_uframes_t time_to_frames(unsigned int rate,
+ unsigned long long time)
+{
+ return (time * rate) / 1000000ULL;
+}
+
+static int setparams_stream(struct loopback_handle *lhandle,
+ snd_pcm_hw_params_t *params)
+{
+ snd_pcm_t *handle = lhandle->handle;
+ int err;
+ unsigned int rrate;
+
+ err = snd_pcm_hw_params_any(handle, params);
+ if (err < 0) {
+ logit(LOG_CRIT, "Broken configuration for %s PCM: no configurations available: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ err = snd_pcm_hw_params_set_rate_resample(handle, params, lhandle->resample);
+ if (err < 0) {
+ logit(LOG_CRIT, "Resample setup failed for %s (val %i): %s\n", lhandle->id, lhandle->resample, snd_strerror(err));
+ return err;
+ }
+ err = snd_pcm_hw_params_set_access(handle, params, lhandle->access);
+ if (err < 0) {
+ logit(LOG_CRIT, "Access type not available for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ err = snd_pcm_hw_params_set_format(handle, params, lhandle->format);
+ if (err < 0) {
+ logit(LOG_CRIT, "Sample format not available for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ err = snd_pcm_hw_params_set_channels(handle, params, lhandle->channels);
+ if (err < 0) {
+ logit(LOG_CRIT, "Channels count (%i) not available for %s: %s\n", lhandle->channels, lhandle->id, snd_strerror(err));
+ return err;
+ }
+ rrate = lhandle->rate_req;
+ err = snd_pcm_hw_params_set_rate_near(handle, params, &rrate, 0);
+ if (err < 0) {
+ logit(LOG_CRIT, "Rate %iHz not available for %s: %s\n", lhandle->rate_req, lhandle->id, snd_strerror(err));
+ return err;
+ }
+ rrate = 0;
+ snd_pcm_hw_params_get_rate(params, &rrate, 0);
+ lhandle->rate = rrate;
+ if (
+#ifdef USE_SAMPLERATE
+ !lhandle->loopback->src_enable &&
+#endif
+ (int)rrate != lhandle->rate) {
+ logit(LOG_CRIT, "Rate does not match (requested %iHz, got %iHz, resample %i)\n", lhandle->rate, rrate, lhandle->resample);
+ return -EINVAL;
+ }
+ lhandle->pitch = (double)lhandle->rate_req / (double)lhandle->rate;
+ return 0;
+}
+
+static int setparams_bufsize(struct loopback_handle *lhandle,
+ snd_pcm_hw_params_t *params,
+ snd_pcm_hw_params_t *tparams,
+ snd_pcm_uframes_t bufsize)
+{
+ snd_pcm_t *handle = lhandle->handle;
+ int err;
+ snd_pcm_uframes_t periodsize;
+ snd_pcm_uframes_t buffersize;
+ snd_pcm_uframes_t last_bufsize = 0;
+
+ if (lhandle->buffer_size_req > 0) {
+ bufsize = lhandle->buffer_size_req;
+ last_bufsize = bufsize;
+ goto __set_it;
+ }
+ __again:
+ if (lhandle->buffer_size_req > 0) {
+ logit(LOG_CRIT, "Unable to set buffer size %li for %s\n", (long)lhandle->buffer_size, lhandle->id);
+ return -EIO;
+ }
+ if (last_bufsize == bufsize)
+ bufsize += 4;
+ last_bufsize = bufsize;
+ if (bufsize > 10*1024*1024) {
+ logit(LOG_CRIT, "Buffer size too big\n");
+ return -EIO;
+ }
+ __set_it:
+ snd_pcm_hw_params_copy(params, tparams);
+ periodsize = bufsize * 8;
+ err = snd_pcm_hw_params_set_buffer_size_near(handle, params, &periodsize);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to set buffer size %li for %s: %s\n", periodsize, lhandle->id, snd_strerror(err));
+ goto __again;
+ }
+ snd_pcm_hw_params_get_buffer_size(params, &periodsize);
+ if (verbose > 6)
+ snd_output_printf(lhandle->loopback->output, "%s: buffer_size=%li\n", lhandle->id, periodsize);
+ if (lhandle->period_size_req > 0)
+ periodsize = lhandle->period_size_req;
+ else
+ periodsize /= 8;
+ err = snd_pcm_hw_params_set_period_size_near(handle, params, &periodsize, 0);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to set period size %li for %s: %s\n", periodsize, lhandle->id, snd_strerror(err));
+ goto __again;
+ }
+ snd_pcm_hw_params_get_period_size(params, &periodsize, NULL);
+ if (verbose > 6)
+ snd_output_printf(lhandle->loopback->output, "%s: period_size=%li\n", lhandle->id, periodsize);
+ if (periodsize != bufsize)
+ bufsize = periodsize;
+ snd_pcm_hw_params_get_buffer_size(params, &buffersize);
+ if (periodsize * 2 > buffersize)
+ goto __again;
+ lhandle->period_size = periodsize;
+ lhandle->buffer_size = buffersize;
+ return 0;
+}
+
+static int setparams_set(struct loopback_handle *lhandle,
+ snd_pcm_hw_params_t *params,
+ snd_pcm_sw_params_t *swparams,
+ snd_pcm_uframes_t bufsize)
+{
+ snd_pcm_t *handle = lhandle->handle;
+ int err;
+ snd_pcm_uframes_t val, period_size, buffer_size;
+
+ err = snd_pcm_hw_params(handle, params);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to set hw params for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ err = snd_pcm_sw_params_current(handle, swparams);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to determine current swparams for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ err = snd_pcm_sw_params_set_start_threshold(handle, swparams, 0x7fffffff);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to set start threshold mode for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ snd_pcm_hw_params_get_period_size(params, &period_size, NULL);
+ snd_pcm_hw_params_get_buffer_size(params, &buffer_size);
+ if (lhandle->nblock) {
+ if (lhandle == lhandle->loopback->play) {
+ val = buffer_size - (2 * period_size - 4);
+ } else {
+ val = 4;
+ }
+ if (verbose > 6)
+ snd_output_printf(lhandle->loopback->output, "%s: avail_min1=%li\n", lhandle->id, val);
+ } else {
+ if (lhandle == lhandle->loopback->play) {
+ val = bufsize + bufsize / 2;
+ if (val > (buffer_size * 3) / 4)
+ val = (buffer_size * 3) / 4;
+ val = buffer_size - val;
+ } else {
+ val = bufsize / 2;
+ if (val > buffer_size / 4)
+ val = buffer_size / 4;
+ }
+ if (verbose > 6)
+ snd_output_printf(lhandle->loopback->output, "%s: avail_min2=%li\n", lhandle->id, val);
+ }
+ err = snd_pcm_sw_params_set_avail_min(handle, swparams, val);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to set avail min for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ snd_pcm_sw_params_get_avail_min(swparams, &lhandle->avail_min);
+ err = snd_pcm_sw_params(handle, swparams);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to set sw params for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+static int setparams(struct loopback *loop, snd_pcm_uframes_t bufsize)
+{
+ int err;
+ snd_pcm_hw_params_t *pt_params, *ct_params; /* templates with rate, format and channels */
+ snd_pcm_hw_params_t *p_params, *c_params;
+ snd_pcm_sw_params_t *p_swparams, *c_swparams;
+
+ snd_pcm_hw_params_alloca(&p_params);
+ snd_pcm_hw_params_alloca(&c_params);
+ snd_pcm_hw_params_alloca(&pt_params);
+ snd_pcm_hw_params_alloca(&ct_params);
+ snd_pcm_sw_params_alloca(&p_swparams);
+ snd_pcm_sw_params_alloca(&c_swparams);
+ if ((err = setparams_stream(loop->play, pt_params)) < 0) {
+ logit(LOG_CRIT, "Unable to set parameters for %s stream: %s\n", loop->play->id, snd_strerror(err));
+ return err;
+ }
+ if ((err = setparams_stream(loop->capt, ct_params)) < 0) {
+ logit(LOG_CRIT, "Unable to set parameters for %s stream: %s\n", loop->capt->id, snd_strerror(err));
+ return err;
+ }
+
+ if ((err = setparams_bufsize(loop->play, p_params, pt_params, bufsize / loop->play->pitch)) < 0) {
+ logit(LOG_CRIT, "Unable to set buffer parameters for %s stream: %s\n", loop->play->id, snd_strerror(err));
+ return err;
+ }
+ if ((err = setparams_bufsize(loop->capt, c_params, ct_params, bufsize / loop->capt->pitch)) < 0) {
+ logit(LOG_CRIT, "Unable to set buffer parameters for %s stream: %s\n", loop->capt->id, snd_strerror(err));
+ return err;
+ }
+
+ if ((err = setparams_set(loop->play, p_params, p_swparams, bufsize / loop->play->pitch)) < 0) {
+ logit(LOG_CRIT, "Unable to set sw parameters for %s stream: %s\n", loop->play->id, snd_strerror(err));
+ return err;
+ }
+ if ((err = setparams_set(loop->capt, c_params, c_swparams, bufsize / loop->capt->pitch)) < 0) {
+ logit(LOG_CRIT, "Unable to set sw parameters for %s stream: %s\n", loop->capt->id, snd_strerror(err));
+ return err;
+ }
+
+#if 0
+ if (!loop->linked)
+ if (snd_pcm_link(loop->capt->handle, loop->play->handle) >= 0)
+ loop->linked = 1;
+#endif
+ if ((err = snd_pcm_prepare(loop->play->handle)) < 0) {
+ logit(LOG_CRIT, "Prepare %s error: %s\n", loop->play->id, snd_strerror(err));
+ return err;
+ }
+ if (!loop->linked && (err = snd_pcm_prepare(loop->capt->handle)) < 0) {
+ logit(LOG_CRIT, "Prepare %s error: %s\n", loop->capt->id, snd_strerror(err));
+ return err;
+ }
+
+ if (verbose) {
+ snd_pcm_dump(loop->play->handle, loop->output);
+ snd_pcm_dump(loop->capt->handle, loop->output);
+ }
+ return 0;
+}
+
+static void showlatency(snd_output_t *out, size_t latency, unsigned int rate,
+ char *prefix)
+{
+ double d;
+ d = (double)latency / (double)rate;
+ snd_output_printf(out, "%s %li frames, %.3fus, %.6fms (%.4fHz)\n", prefix, (long)latency, d * 1000000, d * 1000, (double)1 / d);
+}
+
+static long timediff(snd_timestamp_t t1, snd_timestamp_t t2)
+{
+ signed long l;
+
+ t1.tv_sec -= t2.tv_sec;
+ if (t1.tv_usec < t2.tv_usec) {
+ l = ((t1.tv_usec + 1000000) - t2.tv_usec) % 1000000;
+ t1.tv_sec--;
+ } else {
+ l = t1.tv_usec - t2.tv_usec;
+ }
+ return (t1.tv_sec * 1000000) + l;
+}
+
+static int getcurtimestamp(snd_timestamp_t *ts)
+{
+ struct timeval tv;
+ gettimeofday(&tv, NULL);
+ ts->tv_sec = tv.tv_sec;
+ ts->tv_usec = tv.tv_usec;
+ return 0;
+}
+
+static void xrun_profile0(struct loopback *loop)
+{
+ snd_pcm_sframes_t pdelay, cdelay;
+
+ if (snd_pcm_delay(loop->play->handle, &pdelay) >= 0 &&
+ snd_pcm_delay(loop->capt->handle, &cdelay) >= 0) {
+ getcurtimestamp(&loop->xrun_last_update);
+ loop->xrun_last_pdelay = pdelay;
+ loop->xrun_last_cdelay = cdelay;
+ loop->xrun_buf_pcount = loop->play->buf_count;
+ loop->xrun_buf_ccount = loop->capt->buf_count;
+#ifdef USE_SAMPLERATE
+ loop->xrun_out_frames = loop->src_out_frames;
+#endif
+ }
+}
+
+static inline void xrun_profile(struct loopback *loop)
+{
+ if (loop->xrun)
+ xrun_profile0(loop);
+}
+
+static void xrun_stats0(struct loopback *loop)
+{
+ snd_timestamp_t t;
+ double expected, last, wake, check, queued = -1, proc, missing = -1;
+ double maxbuf, pfilled, cfilled, cqueued = -1, avail_min;
+ double sincejob;
+
+ expected = ((double)loop->latency /
+ (double)loop->play->rate_req) * 1000;
+ getcurtimestamp(&t);
+ last = (double)timediff(t, loop->xrun_last_update) / 1000;
+ wake = (double)timediff(t, loop->xrun_last_wake) / 1000;
+ check = (double)timediff(t, loop->xrun_last_check) / 1000;
+ sincejob = (double)timediff(t, loop->tstamp_start) / 1000;
+ if (loop->xrun_last_pdelay != XRUN_PROFILE_UNKNOWN)
+ queued = ((double)loop->xrun_last_pdelay /
+ (double)loop->play->rate) * 1000;
+ if (loop->xrun_last_cdelay != XRUN_PROFILE_UNKNOWN)
+ cqueued = ((double)loop->xrun_last_cdelay /
+ (double)loop->capt->rate) * 1000;
+ maxbuf = ((double)loop->play->buffer_size /
+ (double)loop->play->rate) * 1000;
+ proc = (double)loop->xrun_max_proctime / 1000;
+ pfilled = ((double)(loop->xrun_buf_pcount + loop->xrun_out_frames) /
+ (double)loop->play->rate) * 1000;
+ cfilled = ((double)loop->xrun_buf_ccount /
+ (double)loop->capt->rate) * 1000;
+ avail_min = (((double)loop->play->buffer_size -
+ (double)loop->play->avail_min ) /
+ (double)loop->play->rate) * 1000;
+ avail_min = expected - avail_min;
+ if (queued >= 0)
+ missing = last - queued;
+ if (missing >= 0 && loop->xrun_max_missing < missing)
+ loop->xrun_max_missing = missing;
+ loop->xrun_max_proctime = 0;
+ getcurtimestamp(&t);
+ logit(LOG_INFO, " last write before %.4fms, queued %.4fms/%.4fms -> missing %.4fms\n", last, queued, cqueued, missing);
+ logit(LOG_INFO, " expected %.4fms, processing %.4fms, max missing %.4fms\n", expected, proc, loop->xrun_max_missing);
+ logit(LOG_INFO, " last wake %.4fms, last check %.4fms, avail_min %.4fms\n", wake, check, avail_min);
+ logit(LOG_INFO, " max buf %.4fms, pfilled %.4fms, cfilled %.4fms\n", maxbuf, pfilled, cfilled);
+ logit(LOG_INFO, " job started before %.4fms\n", sincejob);
+}
+
+static inline void xrun_stats(struct loopback *loop)
+{
+ if (loop->xrun)
+ xrun_stats0(loop);
+}
+
+static inline snd_pcm_uframes_t buf_avail(struct loopback_handle *lhandle)
+{
+ return lhandle->buf_size - lhandle->buf_count;
+}
+
+static void buf_remove(struct loopback *loop, snd_pcm_uframes_t count)
+{
+ /* remove samples from the capture buffer */
+ if (count <= 0)
+ return;
+ if (loop->play->buf == loop->capt->buf) {
+ if (count < loop->capt->buf_count)
+ loop->capt->buf_count -= count;
+ else
+ loop->capt->buf_count = 0;
+ }
+}
+
+#if 0
+static void buf_add_copy(struct loopback *loop)
+{
+ struct loopback_handle *capt = loop->capt;
+ struct loopback_handle *play = loop->play;
+ snd_pcm_uframes_t count, count1, cpos, ppos;
+
+ count = capt->buf_count;
+ cpos = capt->buf_pos - count;
+ if (cpos > capt->buf_size)
+ cpos += capt->buf_size;
+ ppos = (play->buf_pos + play->buf_count) % play->buf_size;
+ while (count > 0) {
+ count1 = count;
+ if (count1 + cpos > capt->buf_size)
+ count1 = capt->buf_size - cpos;
+ if (count1 > buf_avail(play))
+ count1 = buf_avail(play);
+ if (count1 + ppos > play->buf_size)
+ count1 = play->buf_size - ppos;
+ if (count1 == 0)
+ break;
+ memcpy(play->buf + ppos * play->frame_size,
+ capt->buf + cpos * capt->frame_size,
+ count1 * capt->frame_size);
+ play->buf_count += count1;
+ capt->buf_count -= count1;
+ ppos += count1;
+ ppos %= play->buf_size;
+ cpos += count1;
+ cpos %= capt->buf_size;
+ count -= count1;
+ }
+}
+#endif
+
+#ifdef USE_SAMPLERATE
+static void buf_add_src(struct loopback *loop)
+{
+ struct loopback_handle *capt = loop->capt;
+ struct loopback_handle *play = loop->play;
+ float *old_data_out;
+ snd_pcm_uframes_t count, pos, count1, pos1;
+ count = capt->buf_count;
+ pos = 0;
+ pos1 = capt->buf_pos - count;
+ if (pos1 > capt->buf_size)
+ pos1 += capt->buf_size;
+ while (count > 0) {
+ count1 = count;
+ if (count1 + pos1 > capt->buf_size)
+ count1 = capt->buf_size - pos1;
+ if (capt->format == SND_PCM_FORMAT_S32)
+ src_int_to_float_array((int *)(capt->buf +
+ pos1 * capt->frame_size),
+ loop->src_data.data_in +
+ pos * capt->channels,
+ count1 * capt->channels);
+ else
+ src_short_to_float_array((short *)(capt->buf +
+ pos1 * capt->frame_size),
+ loop->src_data.data_in +
+ pos * capt->channels,
+ count1 * capt->channels);
+ count -= count1;
+ pos += count1;
+ pos1 += count1;
+ pos1 %= capt->buf_size;
+ }
+ loop->src_data.input_frames = pos;
+ loop->src_data.output_frames = play->buf_size -
+ loop->src_out_frames;
+ loop->src_data.end_of_input = 0;
+ old_data_out = loop->src_data.data_out;
+ loop->src_data.data_out = old_data_out + loop->src_out_frames;
+ src_process(loop->src_state, &loop->src_data);
+ loop->src_data.data_out = old_data_out;
+ capt->buf_count -= loop->src_data.input_frames_used;
+ count = loop->src_data.output_frames_gen +
+ loop->src_out_frames;
+ pos = 0;
+ pos1 = (play->buf_pos + play->buf_count) % play->buf_size;
+ while (count > 0) {
+ count1 = count;
+ if (count1 + pos1 > play->buf_size)
+ count1 = play->buf_size - pos1;
+ if (count1 > buf_avail(play))
+ count1 = buf_avail(play);
+ if (count1 == 0)
+ break;
+ if (capt->format == SND_PCM_FORMAT_S32)
+ src_float_to_int_array(loop->src_data.data_out +
+ pos * play->channels,
+ (int *)(play->buf +
+ pos1 * play->frame_size),
+ count1 * play->channels);
+ else
+ src_float_to_short_array(loop->src_data.data_out +
+ pos * play->channels,
+ (short *)(play->buf +
+ pos1 * play->frame_size),
+ count1 * play->channels);
+ play->buf_count += count1;
+ count -= count1;
+ pos += count1;
+ pos1 += count1;
+ pos1 %= play->buf_size;
+ }
+#if 0
+ printf("src: pos = %li, gen = %li, out = %li, count = %li\n",
+ (long)pos, (long)loop->src_data.output_frames_gen,
+ (long)loop->src_out_frames, play->buf_count);
+#endif
+ loop->src_out_frames = (loop->src_data.output_frames_gen +
+ loop->src_out_frames) - pos;
+ if (loop->src_out_frames > 0) {
+ memmove(loop->src_data.data_out,
+ loop->src_data.data_out + pos * play->channels,
+ loop->src_out_frames * play->channels * sizeof(float));
+ }
+}
+#else
+static void buf_add_src(struct loopback *loop)
+{
+}
+#endif
+
+static void buf_add(struct loopback *loop, snd_pcm_uframes_t count)
+{
+ /* copy samples from capture to playback buffer */
+ if (count <= 0)
+ return;
+ if (loop->play->buf == loop->capt->buf) {
+ loop->play->buf_count += count;
+ } else {
+ buf_add_src(loop);
+ }
+}
+
+static int xrun(struct loopback_handle *lhandle)
+{
+ int err;
+
+ if (lhandle == lhandle->loopback->play) {
+ logit(LOG_DEBUG, "underrun for %s\n", lhandle->id);
+ xrun_stats(lhandle->loopback);
+ if ((err = snd_pcm_prepare(lhandle->handle)) < 0)
+ return err;
+ lhandle->xrun_pending = 1;
+ } else {
+ logit(LOG_DEBUG, "overrun for %s\n", lhandle->id);
+ xrun_stats(lhandle->loopback);
+ if ((err = snd_pcm_prepare(lhandle->handle)) < 0)
+ return err;
+ lhandle->xrun_pending = 1;
+ }
+ return 0;
+}
+
+static int suspend(struct loopback_handle *lhandle)
+{
+ int err;
+
+ while ((err = snd_pcm_resume(lhandle->handle)) == -EAGAIN)
+ usleep(1);
+ if (err < 0)
+ return xrun(lhandle);
+ return 0;
+}
+
+static int readit(struct loopback_handle *lhandle)
+{
+ snd_pcm_sframes_t r, res = 0;
+ snd_pcm_sframes_t avail;
+ int err;
+
+ avail = snd_pcm_avail_update(lhandle->handle);
+ if (avail == -EPIPE) {
+ return xrun(lhandle);
+ } else if (avail == -ESTRPIPE) {
+ if ((err = suspend(lhandle)) < 0)
+ return err;
+ }
+ if (avail > buf_avail(lhandle)) {
+ lhandle->buf_over += avail - buf_avail(lhandle);
+ avail = buf_avail(lhandle);
+ } else if (avail == 0) {
+ if (snd_pcm_state(lhandle->handle) == SND_PCM_STATE_DRAINING) {
+ lhandle->loopback->reinit = 1;
+ return 0;
+ }
+ }
+ while (avail > 0) {
+ r = buf_avail(lhandle);
+ if (r + lhandle->buf_pos > lhandle->buf_size)
+ r = lhandle->buf_size - lhandle->buf_pos;
+ if (r > avail)
+ r = avail;
+ r = snd_pcm_readi(lhandle->handle,
+ lhandle->buf +
+ lhandle->buf_pos *
+ lhandle->frame_size, r);
+ if (r == 0)
+ return res;
+ if (r < 0) {
+ if (r == -EPIPE) {
+ err = xrun(lhandle);
+ return res > 0 ? res : err;
+ } else if (r == -ESTRPIPE) {
+ if ((err = suspend(lhandle)) < 0)
+ return res > 0 ? res : err;
+ r = 0;
+ } else {
+ return res > 0 ? res : r;
+ }
+ }
+#ifdef FILE_CWRITE
+ if (lhandle->loopback->cfile)
+ fwrite(lhandle->buf + lhandle->buf_pos * lhandle->frame_size,
+ r, lhandle->frame_size, lhandle->loopback->cfile);
+#endif
+ res += r;
+ if (lhandle->max < res)
+ lhandle->max = res;
+ lhandle->counter += r;
+ lhandle->buf_count += r;
+ lhandle->buf_pos += r;
+ lhandle->buf_pos %= lhandle->buf_size;
+ avail -= r;
+ }
+ return res;
+}
+
+static int writeit(struct loopback_handle *lhandle)
+{
+ snd_pcm_sframes_t avail;
+ snd_pcm_sframes_t r, res = 0;
+ int err;
+
+ __again:
+ avail = snd_pcm_avail_update(lhandle->handle);
+ if (avail == -EPIPE) {
+ if ((err = xrun(lhandle)) < 0)
+ return err;
+ return res;
+ } else if (avail == -ESTRPIPE) {
+ if ((err = suspend(lhandle)) < 0)
+ return err;
+ goto __again;
+ }
+ while (avail > 0 && lhandle->buf_count > 0) {
+ r = lhandle->buf_count;
+ if (r + lhandle->buf_pos > lhandle->buf_size)
+ r = lhandle->buf_size - lhandle->buf_pos;
+ if (r > avail)
+ r = avail;
+ r = snd_pcm_writei(lhandle->handle,
+ lhandle->buf +
+ lhandle->buf_pos *
+ lhandle->frame_size, r);
+ if (r <= 0) {
+ if (r == -EPIPE) {
+ if ((err = xrun(lhandle)) < 0)
+ return err;
+ return res;
+ } else if (r == -ESTRPIPE) {
+ }
+ return res > 0 ? res : r;
+ }
+#ifdef FILE_PWRITE
+ if (lhandle->loopback->pfile)
+ fwrite(lhandle->buf + lhandle->buf_pos * lhandle->frame_size,
+ r, lhandle->frame_size, lhandle->loopback->pfile);
+#endif
+ res += r;
+ lhandle->counter += r;
+ lhandle->buf_count -= r;
+ lhandle->buf_pos += r;
+ lhandle->buf_pos %= lhandle->buf_size;
+ xrun_profile(lhandle->loopback);
+ if (lhandle->loopback->stop_pending) {
+ lhandle->loopback->stop_count += r;
+ if (lhandle->loopback->stop_count * lhandle->pitch >
+ lhandle->loopback->latency * 3) {
+ lhandle->loopback->stop_pending = 0;
+ lhandle->loopback->reinit = 1;
+ break;
+ }
+ }
+ }
+ return res;
+}
+
+static snd_pcm_sframes_t remove_samples(struct loopback *loop,
+ int capture_preferred,
+ snd_pcm_sframes_t count)
+{
+ struct loopback_handle *play = loop->play;
+ struct loopback_handle *capt = loop->capt;
+
+ if (loop->play->buf == loop->capt->buf) {
+ if (count > loop->play->buf_count)
+ count = loop->play->buf_count;
+ if (count > loop->capt->buf_count)
+ count = loop->capt->buf_count;
+ capt->buf_count -= count;
+ play->buf_pos += count;
+ play->buf_pos %= play->buf_size;
+ play->buf_count -= count;
+ return count;
+ }
+ if (capture_preferred) {
+ if (count > capt->buf_count)
+ count = capt->buf_count;
+ capt->buf_count -= count;
+ } else {
+ if (count > play->buf_count)
+ count = play->buf_count;
+ play->buf_count -= count;
+ }
+ return count;
+}
+
+static int xrun_sync(struct loopback *loop)
+{
+ struct loopback_handle *play = loop->play;
+ struct loopback_handle *capt = loop->capt;
+ snd_pcm_uframes_t fill = get_whole_latency(loop);
+ snd_pcm_sframes_t pdelay, cdelay, delay1, pdelay1, cdelay1, diff;
+ int err;
+
+ __again:
+ if (verbose > 5)
+ snd_output_printf(loop->output, "%s: xrun sync %i %i\n", loop->id, capt->xrun_pending, play->xrun_pending);
+ if (capt->xrun_pending) {
+ __pagain:
+ capt->xrun_pending = 0;
+ if ((err = snd_pcm_prepare(capt->handle)) < 0) {
+ logit(LOG_CRIT, "%s prepare failed: %s\n", capt->id, snd_strerror(err));
+ return err;
+ }
+ if ((err = snd_pcm_start(capt->handle)) < 0) {
+ logit(LOG_CRIT, "%s start failed: %s\n", capt->id, snd_strerror(err));
+ return err;
+ }
+ } else {
+ diff = readit(capt);
+ buf_add(loop, diff);
+ if (capt->xrun_pending)
+ goto __pagain;
+ }
+ /* skip additional playback samples */
+ if ((err = snd_pcm_delay(capt->handle, &cdelay)) < 0) {
+ if (err == -EPIPE) {
+ capt->xrun_pending = 1;
+ goto __again;
+ }
+ if (err == -ESTRPIPE) {
+ err = suspend(capt);
+ if (err < 0)
+ return err;
+ goto __again;
+ }
+ logit(LOG_CRIT, "%s capture delay failed: %s\n", capt->id, snd_strerror(err));
+ return err;
+ }
+ if ((err = snd_pcm_delay(play->handle, &pdelay)) < 0) {
+ if (err == -EPIPE) {
+ pdelay = 0;
+ play->xrun_pending = 1;
+ } else if (err == -ESTRPIPE) {
+ err = suspend(play);
+ if (err < 0)
+ return err;
+ goto __again;
+ } else {
+ logit(LOG_CRIT, "%s playback delay failed: %s\n", play->id, snd_strerror(err));
+ return err;
+ }
+ }
+ capt->counter = cdelay;
+ play->counter = pdelay;
+ if (play->buf != capt->buf)
+ cdelay += capt->buf_count;
+ pdelay += play->buf_count;
+#ifdef USE_SAMPLERATE
+ pdelay += loop->src_out_frames;
+#endif
+ cdelay1 = cdelay * capt->pitch;
+ pdelay1 = pdelay * play->pitch;
+ delay1 = cdelay1 + pdelay1;
+ capt->total_queued = 0;
+ play->total_queued = 0;
+ loop->total_queued_count = 0;
+ loop->pitch_diff = loop->pitch_diff_min = loop->pitch_diff_max = 0;
+ if (verbose > 6) {
+ snd_output_printf(loop->output,
+ "sync: cdelay=%li(%li), pdelay=%li(%li), fill=%li (delay=%li)"
+#ifdef USE_SAMPLERATE
+ ", src_out=%li"
+#endif
+ "\n",
+ (long)cdelay, (long)cdelay1, (long)pdelay, (long)pdelay1,
+ (long)fill, (long)delay1
+#ifdef USE_SAMPLERATE
+ , (long)loop->src_out_frames
+#endif
+ );
+ snd_output_printf(loop->output,
+ "sync: cbufcount=%li, pbufcount=%li\n",
+ (long)capt->buf_count, (long)play->buf_count);
+ }
+ if (delay1 > fill && capt->counter > 0) {
+ if ((err = snd_pcm_drop(capt->handle)) < 0)
+ return err;
+ if ((err = snd_pcm_prepare(capt->handle)) < 0)
+ return err;
+ if ((err = snd_pcm_start(capt->handle)) < 0)
+ return err;
+ diff = remove_samples(loop, 1, (delay1 - fill) / capt->pitch);
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: capt stop removed %li samples\n", (long)diff);
+ goto __again;
+ }
+ if (delay1 > fill) {
+ diff = (delay1 - fill) / play->pitch;
+ if (diff > play->buf_count)
+ diff = play->buf_count;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: removing %li playback samples, delay1=%li\n", (long)diff, (long)delay1);
+ diff = remove_samples(loop, 0, diff);
+ pdelay -= diff;
+ pdelay1 = pdelay * play->pitch;
+ delay1 = cdelay1 + pdelay1;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: removed %li playback samples, delay1=%li\n", (long)diff, (long)delay1);
+ }
+ if (delay1 > fill) {
+ diff = (delay1 - fill) / capt->pitch;
+ if (diff > capt->buf_count)
+ diff = capt->buf_count;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: removing %li captured samples, delay1=%li\n", (long)diff, (long)delay1);
+ diff -= remove_samples(loop, 1, diff);
+ cdelay -= diff;
+ cdelay1 = cdelay * capt->pitch;
+ delay1 = cdelay1 + pdelay1;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: removed %li captured samples, delay1=%li\n", (long)diff, (long)delay1);
+ }
+ if (play->xrun_pending) {
+ play->xrun_pending = 0;
+ diff = (fill - delay1) / play->pitch;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: xrun_pending, silence filling %li / buf_count=%li\n", (long)diff, play->buf_count);
+ if (fill > delay1 && play->buf_count < diff) {
+ diff = diff - play->buf_count;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: playback silence added %li samples\n", (long)diff);
+ play->buf_pos -= diff;
+ play->buf_pos %= play->buf_size;
+ if ((err = snd_pcm_format_set_silence(play->format, play->buf + play->buf_pos * play->channels, diff)) < 0)
+ return err;
+ play->buf_count += diff;
+ }
+ if ((err = snd_pcm_prepare(play->handle)) < 0) {
+ logit(LOG_CRIT, "%s prepare failed: %s\n", play->id, snd_strerror(err));
+
+ return err;
+ }
+ delay1 = writeit(play);
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: playback wrote %li samples\n", (long)delay1);
+ if (delay1 > diff) {
+ buf_remove(loop, delay1 - diff);
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: playback buf_remove %li samples\n", (long)(delay1 - diff));
+ }
+ if ((err = snd_pcm_start(play->handle)) < 0) {
+ logit(LOG_CRIT, "%s start failed: %s\n", play->id, snd_strerror(err));
+ return err;
+ }
+ } else if (delay1 < fill) {
+ diff = (fill - delay1) / play->pitch;
+ while (diff > 0) {
+ delay1 = play->buf_size - play->buf_pos;
+ if (verbose > 6)
+ snd_output_printf(loop->output,
+ "sync: playback short, silence filling %li / buf_count=%li\n", (long)delay1, play->buf_count);
+ if (delay1 > diff)
+ delay1 = diff;
+ if ((err = snd_pcm_format_set_silence(play->format, play->buf + play->buf_pos * play->channels, delay1)) < 0)
+ return err;
+ play->buf_pos += delay1;
+ play->buf_pos %= play->buf_size;
+ play->buf_count += delay1;
+ diff -= delay1;
+ }
+ writeit(play);
+ }
+ if (verbose > 5) {
+ snd_output_printf(loop->output, "%s: xrun sync ok\n", loop->id);
+ if (verbose > 6) {
+ if (snd_pcm_delay(capt->handle, &cdelay) < 0)
+ cdelay = -1;
+ if (snd_pcm_delay(play->handle, &pdelay) < 0)
+ pdelay = -1;
+ if (play->buf != capt->buf)
+ cdelay += capt->buf_count;
+ pdelay += play->buf_count;
+#ifdef USE_SAMPLERATE
+ pdelay += loop->src_out_frames;
+#endif
+ cdelay1 = cdelay * capt->pitch;
+ pdelay1 = pdelay * play->pitch;
+ delay1 = cdelay1 + pdelay1;
+ snd_output_printf(loop->output, "%s: sync verify: %li\n", loop->id, delay1);
+ }
+ }
+ loop->xrun_max_proctime = 0;
+ return 0;
+}
+
+static int set_notify(struct loopback_handle *lhandle, int enable)
+{
+ int err;
+
+ if (lhandle->ctl_notify == NULL)
+ return 0;
+ snd_ctl_elem_value_set_boolean(lhandle->ctl_notify, 0, enable);
+ err = snd_ctl_elem_write(lhandle->ctl, lhandle->ctl_notify);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot set PCM Notify element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ err = snd_ctl_elem_read(lhandle->ctl, lhandle->ctl_notify);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot get PCM Notify element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+static int set_rate_shift(struct loopback_handle *lhandle, double pitch)
+{
+ int err;
+
+ if (lhandle->ctl_rate_shift == NULL)
+ return 0;
+ snd_ctl_elem_value_set_integer(lhandle->ctl_rate_shift, 0, pitch * 100000);
+ err = snd_ctl_elem_write(lhandle->ctl, lhandle->ctl_rate_shift);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot set PCM Rate Shift element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return 0;
+}
+
+void update_pitch(struct loopback *loop)
+{
+ double pitch = loop->pitch;
+
+#ifdef USE_SAMPLERATE
+ if (loop->sync == SYNC_TYPE_SAMPLERATE) {
+ loop->src_data.src_ratio = (double)1.0 / (pitch *
+ loop->play->pitch * loop->capt->pitch);
+ if (verbose > 2)
+ snd_output_printf(loop->output, "%s: Samplerate src_ratio update1: %.8f\n", loop->id, loop->src_data.src_ratio);
+ } else
+#endif
+ if (loop->sync == SYNC_TYPE_CAPTRATESHIFT) {
+ set_rate_shift(loop->capt, pitch);
+#ifdef USE_SAMPLERATE
+ if (loop->use_samplerate) {
+ loop->src_data.src_ratio =
+ (double)1.0 /
+ (loop->play->pitch * loop->capt->pitch);
+ if (verbose > 2)
+ snd_output_printf(loop->output, "%s: Samplerate src_ratio update2: %.8f\n", loop->id, loop->src_data.src_ratio);
+ }
+#endif
+ }
+ else if (loop->sync == SYNC_TYPE_PLAYRATESHIFT) {
+ set_rate_shift(loop->play, pitch);
+#ifdef USE_SAMPLERATE
+ if (loop->use_samplerate) {
+ loop->src_data.src_ratio =
+ (double)1.0 /
+ (loop->play->pitch * loop->capt->pitch);
+ if (verbose > 2)
+ snd_output_printf(loop->output, "%s: Samplerate src_ratio update3: %.8f\n", loop->id, loop->src_data.src_ratio);
+ }
+#endif
+ }
+ if (verbose)
+ snd_output_printf(loop->output, "New pitch for %s: %.8f (min/max samples = %li/%li)\n", loop->id, pitch, loop->pitch_diff_min, loop->pitch_diff_max);
+}
+
+static int get_active(struct loopback_handle *lhandle)
+{
+ int err;
+
+ if (lhandle->ctl_active == NULL)
+ return 0;
+ err = snd_ctl_elem_read(lhandle->ctl, lhandle->ctl_active);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot get PCM Slave Active element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return snd_ctl_elem_value_get_boolean(lhandle->ctl_active, 0);
+}
+
+static int get_format(struct loopback_handle *lhandle)
+{
+ int err;
+
+ if (lhandle->ctl_format == NULL)
+ return 0;
+ err = snd_ctl_elem_read(lhandle->ctl, lhandle->ctl_format);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot get PCM Format element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return snd_ctl_elem_value_get_integer(lhandle->ctl_format, 0);
+}
+
+static int get_rate(struct loopback_handle *lhandle)
+{
+ int err;
+
+ if (lhandle->ctl_rate == NULL)
+ return 0;
+ err = snd_ctl_elem_read(lhandle->ctl, lhandle->ctl_rate);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot get PCM Rate element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return snd_ctl_elem_value_get_integer(lhandle->ctl_rate, 0);
+}
+
+static int get_channels(struct loopback_handle *lhandle)
+{
+ int err;
+
+ if (lhandle->ctl_channels == NULL)
+ return 0;
+ err = snd_ctl_elem_read(lhandle->ctl, lhandle->ctl_channels);
+ if (err < 0) {
+ logit(LOG_CRIT, "Cannot get PCM Channels element for %s: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ return snd_ctl_elem_value_get_integer(lhandle->ctl_channels, 0);
+}
+
+static void openctl_elem(struct loopback_handle *lhandle,
+ int device, int subdevice,
+ const char *name,
+ snd_ctl_elem_value_t **elem)
+{
+ int err;
+
+ if (snd_ctl_elem_value_malloc(elem) < 0) {
+ *elem = NULL;
+ } else {
+ snd_ctl_elem_value_set_interface(*elem,
+ SND_CTL_ELEM_IFACE_PCM);
+ snd_ctl_elem_value_set_device(*elem, device);
+ snd_ctl_elem_value_set_subdevice(*elem, subdevice);
+ snd_ctl_elem_value_set_name(*elem, name);
+ err = snd_ctl_elem_read(lhandle->ctl, *elem);
+ if (err < 0) {
+ snd_ctl_elem_value_free(*elem);
+ *elem = NULL;
+ }
+ }
+}
+
+static int openctl(struct loopback_handle *lhandle, int device, int subdevice)
+{
+ int err;
+
+ lhandle->ctl_rate_shift = NULL;
+ if (lhandle->loopback->play == lhandle) {
+ if (lhandle->loopback->controls)
+ goto __events;
+ return 0;
+ }
+ openctl_elem(lhandle, device, subdevice, "PCM Notify",
+ &lhandle->ctl_notify);
+ openctl_elem(lhandle, device, subdevice, "PCM Rate Shift 100000",
+ &lhandle->ctl_rate_shift);
+ set_rate_shift(lhandle, 1);
+ openctl_elem(lhandle, device, subdevice, "PCM Slave Active",
+ &lhandle->ctl_active);
+ openctl_elem(lhandle, device, subdevice, "PCM Slave Format",
+ &lhandle->ctl_format);
+ openctl_elem(lhandle, device, subdevice, "PCM Slave Rate",
+ &lhandle->ctl_rate);
+ openctl_elem(lhandle, device, subdevice, "PCM Slave Channels",
+ &lhandle->ctl_channels);
+ if ((lhandle->ctl_active &&
+ lhandle->ctl_format &&
+ lhandle->ctl_rate &&
+ lhandle->ctl_channels) ||
+ lhandle->loopback->controls) {
+ __events:
+ if ((err = snd_ctl_poll_descriptors_count(lhandle->ctl)) < 0)
+ lhandle->ctl_pollfd_count = 0;
+ else
+ lhandle->ctl_pollfd_count = err;
+ if (snd_ctl_subscribe_events(lhandle->ctl, 1) < 0)
+ lhandle->ctl_pollfd_count = 0;
+ }
+ return 0;
+}
+
+static int openit(struct loopback_handle *lhandle)
+{
+ snd_pcm_info_t *info;
+ int stream = lhandle == lhandle->loopback->play ?
+ SND_PCM_STREAM_PLAYBACK :
+ SND_PCM_STREAM_CAPTURE;
+ int err, card, device, subdevice;
+ pcm_open_lock();
+ err = snd_pcm_open(&lhandle->handle, lhandle->device, stream, SND_PCM_NONBLOCK);
+ pcm_open_unlock();
+ if (err < 0) {
+ logit(LOG_CRIT, "%s open error: %s\n", lhandle->id, snd_strerror(err));
+ return err;
+ }
+ if ((err = snd_pcm_info_malloc(&info)) < 0)
+ return err;
+ if ((err = snd_pcm_info(lhandle->handle, info)) < 0) {
+ snd_pcm_info_free(info);
+ return err;
+ }
+ card = snd_pcm_info_get_card(info);
+ device = snd_pcm_info_get_device(info);
+ subdevice = snd_pcm_info_get_subdevice(info);
+ snd_pcm_info_free(info);
+ lhandle->card_number = card;
+ lhandle->ctl = NULL;
+ if (card >= 0 || lhandle->ctldev) {
+ char name[16], *dev = lhandle->ctldev;
+ if (dev == NULL) {
+ sprintf(name, "hw:%i", card);
+ dev = name;
+ }
+ pcm_open_lock();
+ err = snd_ctl_open(&lhandle->ctl, dev, SND_CTL_NONBLOCK);
+ pcm_open_unlock();
+ if (err < 0) {
+ logit(LOG_CRIT, "%s [%s] ctl open error: %s\n", lhandle->id, dev, snd_strerror(err));
+ lhandle->ctl = NULL;
+ }
+ if (lhandle->ctl)
+ openctl(lhandle, device, subdevice);
+ }
+ return 0;
+}
+
+static int freeit(struct loopback_handle *lhandle)
+{
+ free(lhandle->buf);
+ lhandle->buf = NULL;
+ return 0;
+}
+
+static int closeit(struct loopback_handle *lhandle)
+{
+ int err = 0;
+
+ set_rate_shift(lhandle, 1);
+ if (lhandle->ctl_rate_shift)
+ snd_ctl_elem_value_free(lhandle->ctl_rate_shift);
+ lhandle->ctl_rate_shift = NULL;
+ if (lhandle->ctl)
+ err = snd_ctl_close(lhandle->ctl);
+ lhandle->ctl = NULL;
+ if (lhandle->handle)
+ err = snd_pcm_close(lhandle->handle);
+ lhandle->handle = NULL;
+ return err;
+}
+
+static int init_handle(struct loopback_handle *lhandle, int alloc)
+{
+ snd_pcm_uframes_t lat;
+ lhandle->frame_size = (snd_pcm_format_physical_width(lhandle->format)
+ / 8) * lhandle->channels;
+ lhandle->sync_point = lhandle->rate * 15; /* every 15 seconds */
+ lat = lhandle->loopback->latency;
+ if (lhandle->buffer_size > lat)
+ lat = lhandle->buffer_size;
+ lhandle->buf_size = lat * 2;
+ if (alloc) {
+ lhandle->buf = calloc(1, lhandle->buf_size * lhandle->frame_size);
+ if (lhandle->buf == NULL)
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+int pcmjob_init(struct loopback *loop)
+{
+ int err;
+ char id[128];
+
+#ifdef FILE_CWRITE
+ loop->cfile = fopen(FILE_CWRITE, "w+");
+#endif
+#ifdef FILE_PWRITE
+ loop->pfile = fopen(FILE_PWRITE, "w+");
+#endif
+ if ((err = openit(loop->play)) < 0)
+ goto __error;
+ if ((err = openit(loop->capt)) < 0)
+ goto __error;
+ snprintf(id, sizeof(id), "%s/%s", loop->play->id, loop->capt->id);
+ id[sizeof(id)-1] = '\0';
+ loop->id = strdup(id);
+ if (loop->sync == SYNC_TYPE_AUTO && loop->capt->ctl_rate_shift)
+ loop->sync = SYNC_TYPE_CAPTRATESHIFT;
+ if (loop->sync == SYNC_TYPE_AUTO && loop->play->ctl_rate_shift)
+ loop->sync = SYNC_TYPE_PLAYRATESHIFT;
+#ifdef USE_SAMPLERATE
+ if (loop->sync == SYNC_TYPE_AUTO && loop->src_enable)
+ loop->sync = SYNC_TYPE_SAMPLERATE;
+#endif
+ if (loop->sync == SYNC_TYPE_AUTO)
+ loop->sync = SYNC_TYPE_SIMPLE;
+ if (loop->slave == SLAVE_TYPE_AUTO &&
+ loop->capt->ctl_notify &&
+ loop->capt->ctl_active &&
+ loop->capt->ctl_format &&
+ loop->capt->ctl_rate &&
+ loop->capt->ctl_channels)
+ loop->slave = SLAVE_TYPE_ON;
+ if (loop->slave == SLAVE_TYPE_ON) {
+ err = set_notify(loop->capt, 1);
+ if (err < 0)
+ goto __error;
+ if (loop->capt->ctl_notify == NULL ||
+ snd_ctl_elem_value_get_boolean(loop->capt->ctl_notify, 0) == 0) {
+ logit(LOG_CRIT, "unable to enable slave mode for %s\n", loop->id);
+ err = -EINVAL;
+ goto __error;
+ }
+ }
+ err = control_init(loop);
+ if (err < 0)
+ goto __error;
+ return 0;
+ __error:
+ pcmjob_done(loop);
+ return err;
+}
+
+static void freeloop(struct loopback *loop)
+{
+#ifdef USE_SAMPLERATE
+ if (loop->use_samplerate) {
+ if (loop->src_state)
+ src_delete(loop->src_state);
+ loop->src_state = NULL;
+ free(loop->src_data.data_in);
+ loop->src_data.data_in = NULL;
+ free(loop->src_data.data_out);
+ loop->src_data.data_out = NULL;
+ }
+#endif
+ if (loop->play->buf == loop->capt->buf)
+ loop->play->buf = NULL;
+ freeit(loop->play);
+ freeit(loop->capt);
+}
+
+int pcmjob_done(struct loopback *loop)
+{
+ control_done(loop);
+ closeit(loop->play);
+ closeit(loop->capt);
+ freeloop(loop);
+ free(loop->id);
+ loop->id = NULL;
+#ifdef FILE_PWRITE
+ if (loop->pfile) {
+ fclose(loop->pfile);
+ loop->pfile = NULL;
+ }
+#endif
+#ifdef FILE_CWRITE
+ if (loop->cfile) {
+ fclose(loop->cfile);
+ loop->cfile = NULL;
+ }
+#endif
+ return 0;
+}
+
+static void lhandle_start(struct loopback_handle *lhandle)
+{
+ lhandle->buf_pos = 0;
+ lhandle->buf_count = 0;
+ lhandle->counter = 0;
+ lhandle->total_queued = 0;
+}
+
+static void fix_format(struct loopback *loop, int force)
+{
+ snd_pcm_format_t format = loop->capt->format;
+
+ if (!force && loop->sync != SYNC_TYPE_SAMPLERATE)
+ return;
+ if (format == SND_PCM_FORMAT_S16 ||
+ format == SND_PCM_FORMAT_S32)
+ return;
+ if (snd_pcm_format_width(format) > 16)
+ format = SND_PCM_FORMAT_S32;
+ else
+ format = SND_PCM_FORMAT_S16;
+ loop->capt->format = format;
+ loop->play->format = format;
+}
+
+int pcmjob_start(struct loopback *loop)
+{
+ snd_pcm_uframes_t count;
+ int err;
+
+ loop->pollfd_count = loop->play->ctl_pollfd_count +
+ loop->capt->ctl_pollfd_count;
+ if ((err = snd_pcm_poll_descriptors_count(loop->play->handle)) < 0)
+ goto __error;
+ loop->play->pollfd_count = err;
+ loop->pollfd_count += err;
+ if ((err = snd_pcm_poll_descriptors_count(loop->capt->handle)) < 0)
+ goto __error;
+ loop->capt->pollfd_count = err;
+ loop->pollfd_count += err;
+ if (loop->slave == SLAVE_TYPE_ON) {
+ err = get_active(loop->capt);
+ if (err < 0)
+ goto __error;
+ if (err == 0) /* stream is not active */
+ return 0;
+ err = get_format(loop->capt);
+ if (err < 0)
+ goto __error;
+ loop->play->format = loop->capt->format = err;
+ fix_format(loop, 0);
+ err = get_rate(loop->capt);
+ if (err < 0)
+ goto __error;
+ loop->play->rate_req = loop->capt->rate_req = err;
+ err = get_channels(loop->capt);
+ if (err < 0)
+ goto __error;
+ loop->play->channels = loop->capt->channels = err;
+ }
+ loop->reinit = 0;
+ loop->use_samplerate = 0;
+__again:
+ if (loop->latency_req) {
+ loop->latency_reqtime = frames_to_time(loop->play->rate_req,
+ loop->latency_req);
+ loop->latency_req = 0;
+ }
+ loop->latency = time_to_frames(loop->play->rate_req, loop->latency_reqtime);
+ if ((err = setparams(loop, loop->latency/2)) < 0)
+ goto __error;
+ if (verbose)
+ showlatency(loop->output, loop->latency, loop->play->rate_req, "Latency");
+ if (loop->play->access == loop->capt->access &&
+ loop->play->format == loop->capt->format &&
+ loop->play->rate == loop->capt->rate &&
+ loop->play->channels == loop->play->channels &&
+ loop->sync != SYNC_TYPE_SAMPLERATE) {
+ if (verbose > 1)
+ snd_output_printf(loop->output, "shared buffer!!!\n");
+ if ((err = init_handle(loop->play, 1)) < 0)
+ goto __error;
+ if ((err = init_handle(loop->capt, 0)) < 0)
+ goto __error;
+ if (loop->play->buf_size < loop->capt->buf_size) {
+ char *nbuf = realloc(loop->play->buf,
+ loop->capt->buf_size *
+ loop->capt->frame_size);
+ if (nbuf == NULL) {
+ err = -ENOMEM;
+ goto __error;
+ }
+ loop->play->buf = nbuf;
+ loop->play->buf_size = loop->capt->buf_size;
+ } else if (loop->capt->buf_size < loop->play->buf_size) {
+ char *nbuf = realloc(loop->capt->buf,
+ loop->play->buf_size *
+ loop->play->frame_size);
+ if (nbuf == NULL) {
+ err = -ENOMEM;
+ goto __error;
+ }
+ loop->capt->buf = nbuf;
+ loop->capt->buf_size = loop->play->buf_size;
+ }
+ loop->capt->buf = loop->play->buf;
+ } else {
+ if ((err = init_handle(loop->play, 1)) < 0)
+ goto __error;
+ if ((err = init_handle(loop->capt, 1)) < 0)
+ goto __error;
+ if (loop->play->rate_req != loop->play->rate ||
+ loop->capt->rate_req != loop->capt->rate) {
+ snd_pcm_format_t format1, format2;
+ loop->use_samplerate = 1;
+ format1 = loop->play->format;
+ format2 = loop->capt->format;
+ fix_format(loop, 1);
+ if (loop->play->format != format1 ||
+ loop->capt->format != format2) {
+ pcmjob_stop(loop);
+ goto __again;
+ }
+ }
+ }
+#ifdef USE_SAMPLERATE
+ if (loop->sync == SYNC_TYPE_SAMPLERATE)
+ loop->use_samplerate = 1;
+ if (loop->use_samplerate && !loop->src_enable) {
+ logit(LOG_CRIT, "samplerate conversion required but disabled\n");
+ loop->use_samplerate = 0;
+ err = -EIO;
+ goto __error;
+ }
+ if (loop->use_samplerate) {
+ if ((loop->capt->format != SND_PCM_FORMAT_S16 ||
+ loop->play->format != SND_PCM_FORMAT_S16) &&
+ (loop->capt->format != SND_PCM_FORMAT_S32 ||
+ loop->play->format != SND_PCM_FORMAT_S32)) {
+ logit(LOG_CRIT, "samplerate conversion supports only %s or %s formats (play=%s, capt=%s)\n", snd_pcm_format_name(SND_PCM_FORMAT_S16), snd_pcm_format_name(SND_PCM_FORMAT_S32), snd_pcm_format_name(loop->play->format), snd_pcm_format_name(loop->capt->format));
+ loop->use_samplerate = 0;
+ err = -EIO;
+ goto __error;
+ }
+ loop->src_state = src_new(loop->src_converter_type,
+ loop->play->channels, &err);
+ loop->src_data.data_in = calloc(1, sizeof(float)*loop->capt->channels*loop->capt->buf_size);
+ if (loop->src_data.data_in == NULL) {
+ err = -ENOMEM;
+ goto __error;
+ }
+ loop->src_data.data_out = calloc(1, sizeof(float)*loop->play->channels*loop->play->buf_size);
+ if (loop->src_data.data_out == NULL) {
+ err = -ENOMEM;
+ goto __error;
+ }
+ loop->src_data.src_ratio = (double)loop->play->rate /
+ (double)loop->capt->rate;
+ loop->src_data.end_of_input = 0;
+ loop->src_out_frames = 0;
+ } else {
+ loop->src_state = NULL;
+ }
+#else
+ if (loop->sync == SYNC_TYPE_SAMPLERATE || loop->use_samplerate) {
+ logit(LOG_CRIT, "alsaloop is compiled without libsamplerate support\n");
+ err = -EIO;
+ goto __error;
+ }
+#endif
+ if (verbose) {
+ snd_output_printf(loop->output, "%s sync type: %s", loop->id, sync_types[loop->sync]);
+#ifdef USE_SAMPLERATE
+ if (loop->sync == SYNC_TYPE_SAMPLERATE)
+ snd_output_printf(loop->output, " (%s)", src_types[loop->src_converter_type]);
+#endif
+ snd_output_printf(loop->output, "\n");
+ }
+ lhandle_start(loop->play);
+ lhandle_start(loop->capt);
+ if ((err = snd_pcm_format_set_silence(loop->play->format,
+ loop->play->buf,
+ loop->play->buf_size * loop->play->channels)) < 0) {
+ logit(LOG_CRIT, "%s: silence error\n", loop->id);
+ goto __error;
+ }
+ if (verbose > 4)
+ snd_output_printf(loop->output, "%s: capt->buffer_size = %li, play->buffer_size = %li\n", loop->id, loop->capt->buf_size, loop->play->buf_size);
+ loop->pitch = 1.0;
+ update_pitch(loop);
+ loop->pitch_delta = 1.0 / ((double)loop->capt->rate * 4);
+ loop->total_queued_count = 0;
+ loop->pitch_diff = 0;
+ count = get_whole_latency(loop) / loop->play->pitch;
+ loop->play->buf_count = count;
+ if (loop->play->buf == loop->capt->buf)
+ loop->capt->buf_pos = count;
+ err = writeit(loop->play);
+ if (verbose > 4)
+ snd_output_printf(loop->output, "%s: silence queued %i samples\n", loop->id, err);
+ if (count > loop->play->buffer_size)
+ count = loop->play->buffer_size;
+ if (err != count) {
+ logit(LOG_CRIT, "%s: initial playback fill error (%i/%i/%i)\n", loop->id, err, (int)count, loop->play->buffer_size);
+ err = -EIO;
+ goto __error;
+ }
+ loop->running = 1;
+ loop->stop_pending = 0;
+ if (loop->xrun) {
+ getcurtimestamp(&loop->xrun_last_update);
+ loop->xrun_last_pdelay = XRUN_PROFILE_UNKNOWN;
+ loop->xrun_last_cdelay = XRUN_PROFILE_UNKNOWN;
+ loop->xrun_max_proctime = 0;
+ }
+ if ((err = snd_pcm_start(loop->capt->handle)) < 0) {
+ logit(LOG_CRIT, "pcm start %s error: %s\n", loop->capt->id, snd_strerror(err));
+ goto __error;
+ }
+ if (!loop->linked) {
+ if ((err = snd_pcm_start(loop->play->handle)) < 0) {
+ logit(LOG_CRIT, "pcm start %s error: %s\n", loop->play->id, snd_strerror(err));
+ goto __error;
+ }
+ }
+ return 0;
+ __error:
+ pcmjob_stop(loop);
+ return err;
+}
+
+int pcmjob_stop(struct loopback *loop)
+{
+ int err;
+
+ if (loop->running) {
+ if ((err = snd_pcm_drop(loop->capt->handle)) < 0)
+ logit(LOG_WARNING, "pcm drop %s error: %s\n", loop->capt->id, snd_strerror(err));
+ if ((err = snd_pcm_drop(loop->play->handle)) < 0)
+ logit(LOG_WARNING, "pcm drop %s error: %s\n", loop->play->id, snd_strerror(err));
+ if ((err = snd_pcm_hw_free(loop->capt->handle)) < 0)
+ logit(LOG_WARNING, "pcm hw_free %s error: %s\n", loop->capt->id, snd_strerror(err));
+ if ((err = snd_pcm_hw_free(loop->play->handle)) < 0)
+ logit(LOG_WARNING, "pcm hw_free %s error: %s\n", loop->play->id, snd_strerror(err));
+ loop->running = 0;
+ }
+ freeloop(loop);
+ return 0;
+}
+
+int pcmjob_pollfds_init(struct loopback *loop, struct pollfd *fds)
+{
+ int err, idx = 0;
+
+ if (loop->running) {
+ err = snd_pcm_poll_descriptors(loop->play->handle, fds + idx, loop->play->pollfd_count);
+ if (err < 0)
+ return err;
+ idx += loop->play->pollfd_count;
+ err = snd_pcm_poll_descriptors(loop->capt->handle, fds + idx, loop->capt->pollfd_count);
+ if (err < 0)
+ return err;
+ idx += loop->capt->pollfd_count;
+ }
+ if (loop->play->ctl_pollfd_count > 0 &&
+ (loop->slave == SLAVE_TYPE_ON || loop->controls)) {
+ err = snd_ctl_poll_descriptors(loop->play->ctl, fds + idx, loop->play->ctl_pollfd_count);
+ if (err < 0)
+ return err;
+ idx += loop->play->ctl_pollfd_count;
+ }
+ if (loop->capt->ctl_pollfd_count > 0 &&
+ (loop->slave == SLAVE_TYPE_ON || loop->controls)) {
+ err = snd_ctl_poll_descriptors(loop->capt->ctl, fds + idx, loop->capt->ctl_pollfd_count);
+ if (err < 0)
+ return err;
+ idx += loop->capt->ctl_pollfd_count;
+ }
+ loop->active_pollfd_count = idx;
+ return idx;
+}
+
+static snd_pcm_sframes_t get_queued_playback_samples(struct loopback *loop)
+{
+ snd_pcm_sframes_t delay;
+ int err;
+
+ if ((err = snd_pcm_delay(loop->play->handle, &delay)) < 0)
+ return 0;
+ loop->play->last_delay = delay;
+ delay += loop->play->buf_count;
+#ifdef USE_SAMPLERATE
+ delay += loop->src_out_frames;
+#endif
+ return delay;
+}
+
+static snd_pcm_sframes_t get_queued_capture_samples(struct loopback *loop)
+{
+ snd_pcm_sframes_t delay;
+ int err;
+
+ if ((err = snd_pcm_delay(loop->capt->handle, &delay)) < 0)
+ return 0;
+ loop->capt->last_delay = delay;
+ delay += loop->capt->buf_count;
+ return delay;
+}
+
+static int ctl_event_check(snd_ctl_elem_value_t *val, snd_ctl_event_t *ev)
+{
+ snd_ctl_elem_id_t *id1, *id2;
+ snd_ctl_elem_id_alloca(&id1);
+ snd_ctl_elem_id_alloca(&id2);
+ snd_ctl_elem_value_get_id(val, id1);
+ snd_ctl_event_elem_get_id(ev, id2);
+ if (snd_ctl_event_elem_get_mask(ev) == SND_CTL_EVENT_MASK_REMOVE)
+ return 0;
+ if ((snd_ctl_event_elem_get_mask(ev) & SND_CTL_EVENT_MASK_VALUE) == 0)
+ return 0;
+ return control_id_match(id1, id2);
+}
+
+static int handle_ctl_events(struct loopback_handle *lhandle,
+ unsigned short events)
+{
+ struct loopback *loop = lhandle->loopback;
+ snd_ctl_event_t *ev;
+ int err, restart = 0;
+
+ snd_ctl_event_alloca(&ev);
+ while ((err = snd_ctl_read(lhandle->ctl, ev)) != 0 && err != -EAGAIN) {
+ if (err < 0)
+ break;
+ if (snd_ctl_event_get_type(ev) != SND_CTL_EVENT_ELEM)
+ continue;
+ if (lhandle == loop->play)
+ goto __ctl_check;
+ if (verbose > 6)
+ snd_output_printf(loop->output, "%s: ctl event!!!! %s\n", lhandle->id, snd_ctl_event_elem_get_name(ev));
+ if (ctl_event_check(lhandle->ctl_active, ev)) {
+ continue;
+ } else if (ctl_event_check(lhandle->ctl_format, ev)) {
+ err = get_format(lhandle);
+ if (lhandle->format != err)
+ restart = 1;
+ continue;
+ } else if (ctl_event_check(lhandle->ctl_rate, ev)) {
+ err = get_rate(lhandle);
+ if (lhandle->rate != err)
+ restart = 1;
+ continue;
+ } else if (ctl_event_check(lhandle->ctl_channels, ev)) {
+ err = get_channels(lhandle);
+ if (lhandle->channels != err)
+ restart = 1;
+ continue;
+ }
+ __ctl_check:
+ control_event(lhandle, ev);
+ }
+ err = get_active(lhandle);
+ if (verbose > 7)
+ snd_output_printf(loop->output, "%s: ctl event active %i\n", lhandle->id, err);
+ if (!err) {
+ if (lhandle->loopback->running) {
+ loop->stop_pending = 1;
+ loop->stop_count = 0;
+ }
+ } else {
+ loop->stop_pending = 0;
+ if (loop->running == 0)
+ restart = 1;
+ }
+ if (restart) {
+ pcmjob_stop(loop);
+ err = pcmjob_start(loop);
+ if (err < 0)
+ return err;
+ }
+ return 1;
+}
+
+int pcmjob_pollfds_handle(struct loopback *loop, struct pollfd *fds)
+{
+ struct loopback_handle *play = loop->play;
+ struct loopback_handle *capt = loop->capt;
+ unsigned short prevents, crevents, events;
+ snd_pcm_uframes_t ccount, pcount;
+ int err, loopcount = 10, idx;
+
+ if (verbose > 11)
+ snd_output_printf(loop->output, "%s: pollfds handle\n", loop->id);
+ if (verbose > 13 || loop->xrun)
+ getcurtimestamp(&loop->tstamp_start);
+ if (verbose > 12) {
+ snd_pcm_sframes_t pdelay, cdelay;
+ if ((err = snd_pcm_delay(play->handle, &pdelay)) < 0)
+ snd_output_printf(loop->output, "%s: delay error: %s / %li / %li\n", play->id, snd_strerror(err), play->buf_size, play->buf_count);
+ else
+ snd_output_printf(loop->output, "%s: delay %li / %li / %li\n", play->id, pdelay, play->buf_size, play->buf_count);
+ if ((err = snd_pcm_delay(capt->handle, &cdelay)) < 0)
+ snd_output_printf(loop->output, "%s: delay error: %s / %li / %li\n", capt->id, snd_strerror(err), capt->buf_size, capt->buf_count);
+ else
+ snd_output_printf(loop->output, "%s: delay %li / %li / %li\n", capt->id, cdelay, capt->buf_size, capt->buf_count);
+ }
+ idx = 0;
+ if (loop->running) {
+ err = snd_pcm_poll_descriptors_revents(play->handle, fds,
+ play->pollfd_count,
+ &prevents);
+ if (err < 0)
+ return err;
+ idx += play->pollfd_count;
+ err = snd_pcm_poll_descriptors_revents(capt->handle, fds + idx,
+ capt->pollfd_count,
+ &crevents);
+ if (err < 0)
+ return err;
+ idx += capt->pollfd_count;
+ if (loop->xrun) {
+ if (prevents || crevents) {
+ loop->xrun_last_wake = loop->xrun_last_wake0;
+ loop->xrun_last_wake0 = loop->tstamp_start;
+ }
+ loop->xrun_last_check = loop->xrun_last_check0;
+ loop->xrun_last_check0 = loop->tstamp_start;
+ }
+ } else {
+ prevents = crevents = 0;
+ }
+ if (play->ctl_pollfd_count > 0 &&
+ (loop->slave == SLAVE_TYPE_ON || loop->controls)) {
+ err = snd_ctl_poll_descriptors_revents(play->ctl, fds + idx,
+ play->ctl_pollfd_count,
+ &events);
+ if (err < 0)
+ return err;
+ if (events) {
+ err = handle_ctl_events(play, events);
+ if (err == 1)
+ return 0;
+ if (err < 0)
+ return err;
+ }
+ idx += play->ctl_pollfd_count;
+ }
+ if (capt->ctl_pollfd_count > 0 &&
+ (loop->slave == SLAVE_TYPE_ON || loop->controls)) {
+ err = snd_ctl_poll_descriptors_revents(capt->ctl, fds + idx,
+ capt->ctl_pollfd_count,
+ &events);
+ if (err < 0)
+ return err;
+ if (events) {
+ err = handle_ctl_events(capt, events);
+ if (err == 1)
+ return 0;
+ if (err < 0)
+ return err;
+ }
+ idx += capt->ctl_pollfd_count;
+ }
+ if (verbose > 9)
+ snd_output_printf(loop->output, "%s: prevents = 0x%x, crevents = 0x%x\n", loop->id, prevents, crevents);
+ if (!loop->running)
+ goto __pcm_end;
+ do {
+ ccount = readit(capt);
+ buf_add(loop, ccount);
+ if (capt->xrun_pending || loop->reinit)
+ break;
+ /* we read new samples, if we have a room in the playback
+ buffer, feed them there */
+ pcount = writeit(play);
+ buf_remove(loop, pcount);
+ if (play->xrun_pending || loop->reinit)
+ break;
+ loopcount--;
+ } while ((ccount > 0 || pcount > 0) && loopcount > 0);
+ if (play->xrun_pending || capt->xrun_pending) {
+ if ((err = xrun_sync(loop)) < 0)
+ return err;
+ }
+ if (loop->reinit) {
+ err = pcmjob_stop(loop);
+ if (err < 0)
+ return err;
+ err = pcmjob_start(loop);
+ if (err < 0)
+ return err;
+ }
+ if (loop->sync != SYNC_TYPE_NONE &&
+ play->counter >= play->sync_point &&
+ capt->counter >= play->sync_point) {
+ snd_pcm_sframes_t diff, lat = get_whole_latency(loop);
+ diff = ((double)(((double)play->total_queued * play->pitch) +
+ ((double)capt->total_queued * capt->pitch)) /
+ (double)loop->total_queued_count) - lat;
+ /* FIXME: this algorithm may be slightly better */
+ if (verbose > 3)
+ snd_output_printf(loop->output, "%s: sync diff %li old diff %li\n", loop->id, diff, loop->pitch_diff);
+ if (diff > 0) {
+ if (diff == loop->pitch_diff)
+ loop->pitch += loop->pitch_delta;
+ else if (diff > loop->pitch_diff)
+ loop->pitch += loop->pitch_delta*2;
+ } else if (diff < 0) {
+ if (diff == loop->pitch_diff)
+ loop->pitch -= loop->pitch_delta;
+ else if (diff < loop->pitch_diff)
+ loop->pitch -= loop->pitch_delta*2;
+ }
+ loop->pitch_diff = diff;
+ if (loop->pitch_diff_min > diff)
+ loop->pitch_diff_min = diff;
+ if (loop->pitch_diff_max < diff)
+ loop->pitch_diff_max = diff;
+ update_pitch(loop);
+ play->counter -= play->sync_point;
+ capt->counter -= play->sync_point;
+ play->total_queued = 0;
+ capt->total_queued = 0;
+ loop->total_queued_count = 0;
+ }
+ if (loop->sync != SYNC_TYPE_NONE) {
+ snd_pcm_sframes_t pqueued, cqueued;
+ pqueued = get_queued_playback_samples(loop);
+ cqueued = get_queued_capture_samples(loop);
+ if (verbose > 4)
+ snd_output_printf(loop->output, "%s: queued %li/%li samples\n", loop->id, pqueued, cqueued);
+ if (pqueued > 0)
+ play->total_queued += pqueued;
+ if (cqueued > 0)
+ capt->total_queued += cqueued;
+ if (pqueued > 0 || cqueued > 0)
+ loop->total_queued_count += 1;
+ }
+ if (verbose > 12) {
+ snd_pcm_sframes_t pdelay, cdelay;
+ if ((err = snd_pcm_delay(play->handle, &pdelay)) < 0)
+ snd_output_printf(loop->output, "%s: end delay error: %s / %li / %li\n", play->id, snd_strerror(err), play->buf_size, play->buf_count);
+ else
+ snd_output_printf(loop->output, "%s: end delay %li / %li / %li\n", play->id, pdelay, play->buf_size, play->buf_count);
+ if ((err = snd_pcm_delay(capt->handle, &cdelay)) < 0)
+ snd_output_printf(loop->output, "%s: end delay error: %s / %li / %li\n", capt->id, snd_strerror(err), capt->buf_size, capt->buf_count);
+ else
+ snd_output_printf(loop->output, "%s: end delay %li / %li / %li\n", capt->id, cdelay, capt->buf_size, capt->buf_count);
+ }
+ __pcm_end:
+ if (verbose > 13 || loop->xrun) {
+ long diff;
+ getcurtimestamp(&loop->tstamp_end);
+ diff = timediff(loop->tstamp_end, loop->tstamp_start);
+ if (verbose > 13)
+ snd_output_printf(loop->output, "%s: processing time %lius\n", loop->id, diff);
+ if (loop->xrun && loop->xrun_max_proctime < diff)
+ loop->xrun_max_proctime = diff;
+ }
+ return 0;
+}
+
+#define OUT(args...) \
+ snd_output_printf(loop->state, ##args)
+
+static pthread_mutex_t state_mutex = PTHREAD_MUTEX_INITIALIZER;
+
+static void show_handle(struct loopback_handle *lhandle, const char *id)
+{
+ struct loopback *loop = lhandle->loopback;
+
+ OUT(" %s: %s:\n", id, lhandle->id);
+ OUT(" device = '%s', ctldev '%s'\n", lhandle->device, lhandle->ctldev);
+ OUT(" card_number = %i\n", lhandle->card_number);
+ if (!loop->running)
+ return;
+ OUT(" access = %s, format = %s, rate = %u, channels = %u\n", snd_pcm_access_name(lhandle->access), snd_pcm_format_name(lhandle->format), lhandle->rate, lhandle->channels);
+ OUT(" buffer_size = %u, period_size = %u, avail_min = %li\n", lhandle->buffer_size, lhandle->period_size, lhandle->avail_min);
+ OUT(" xrun_pending = %i\n", lhandle->xrun_pending);
+ OUT(" buf_size = %li, buf_pos = %li, buf_count = %li, buf_over = %li\n", lhandle->buf_size, lhandle->buf_pos, lhandle->buf_count, lhandle->buf_over);
+ OUT(" pitch = %.8f\n", lhandle->pitch);
+}
+
+void pcmjob_state(struct loopback *loop)
+{
+ pthread_t self = pthread_self();
+ pthread_mutex_lock(&state_mutex);
+ OUT("State dump for thread %p job %i: %s:\n", (void *)self, loop->thread, loop->id);
+ OUT(" running = %i\n", loop->running);
+ OUT(" sync = %i\n", loop->sync);
+ OUT(" slave = %i\n", loop->slave);
+ if (!loop->running)
+ goto __skip;
+ OUT(" pollfd_count = %i\n", loop->pollfd_count);
+ OUT(" pitch = %.8f, delta = %.8f, diff = %li, min = %li, max = %li\n", loop->pitch, loop->pitch_delta, loop->pitch_diff, loop->pitch_diff_min, loop->pitch_diff_max);
+ OUT(" use_samplerate = %i\n", loop->use_samplerate);
+ __skip:
+ show_handle(loop->play, "playback");
+ show_handle(loop->capt, "capture");
+ pthread_mutex_unlock(&state_mutex);
+}
diff --git a/alsamixer/Makefile.am b/alsamixer/Makefile.am
new file mode 100644
index 0000000..8a82323
--- /dev/null
+++ b/alsamixer/Makefile.am
@@ -0,0 +1,25 @@
+AM_CFLAGS = @CURSES_CFLAGS@ -DCURSESINC="@CURSESINC@"
+LDADD = @CURSESLIB@
+
+bin_PROGRAMS = alsamixer
+alsamixer_SOURCES = card_select.c card_select.h \
+ cli.c \
+ colors.c colors.h \
+ device_name.c device_name.h \
+ die.c die.h \
+ mainloop.c mainloop.h \
+ mem.c mem.h \
+ mixer_controls.c mixer_controls.h \
+ mixer_display.c mixer_display.h \
+ mixer_widget.c mixer_widget.h \
+ proc_files.c proc_files.h \
+ textbox.c textbox.h \
+ utils.c utils.h \
+ volume_mapping.c volume_mapping.h \
+ widget.c widget.h
+man_MANS = alsamixer.1
+EXTRA_DIST = alsamixer.1
+alsamixer_INCLUDES = -I$(top_srcdir)/include
+
+#LDFLAGS = -static
+#CFLAGS += -g -Wall
diff --git a/alsamixer/Makefile.in b/alsamixer/Makefile.in
new file mode 100644
index 0000000..185544d
--- /dev/null
+++ b/alsamixer/Makefile.in
@@ -0,0 +1,686 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = alsamixer$(EXEEXT)
+subdir = alsamixer
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_alsamixer_OBJECTS = card_select.$(OBJEXT) cli.$(OBJEXT) \
+ colors.$(OBJEXT) device_name.$(OBJEXT) die.$(OBJEXT) \
+ mainloop.$(OBJEXT) mem.$(OBJEXT) mixer_controls.$(OBJEXT) \
+ mixer_display.$(OBJEXT) mixer_widget.$(OBJEXT) \
+ proc_files.$(OBJEXT) textbox.$(OBJEXT) utils.$(OBJEXT) \
+ volume_mapping.$(OBJEXT) widget.$(OBJEXT)
+alsamixer_OBJECTS = $(am_alsamixer_OBJECTS)
+alsamixer_LDADD = $(LDADD)
+alsamixer_DEPENDENCIES =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(alsamixer_SOURCES)
+DIST_SOURCES = $(alsamixer_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+AM_CFLAGS = @CURSES_CFLAGS@ -DCURSESINC="@CURSESINC@"
+LDADD = @CURSESLIB@
+alsamixer_SOURCES = card_select.c card_select.h \
+ cli.c \
+ colors.c colors.h \
+ device_name.c device_name.h \
+ die.c die.h \
+ mainloop.c mainloop.h \
+ mem.c mem.h \
+ mixer_controls.c mixer_controls.h \
+ mixer_display.c mixer_display.h \
+ mixer_widget.c mixer_widget.h \
+ proc_files.c proc_files.h \
+ textbox.c textbox.h \
+ utils.c utils.h \
+ volume_mapping.c volume_mapping.h \
+ widget.c widget.h
+
+man_MANS = alsamixer.1
+EXTRA_DIST = alsamixer.1
+alsamixer_INCLUDES = -I$(top_srcdir)/include
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsamixer/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign alsamixer/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+alsamixer$(EXEEXT): $(alsamixer_OBJECTS) $(alsamixer_DEPENDENCIES) $(EXTRA_alsamixer_DEPENDENCIES)
+ @rm -f alsamixer$(EXEEXT)
+ $(LINK) $(alsamixer_OBJECTS) $(alsamixer_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/card_select.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cli.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/colors.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/device_name.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/die.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mainloop.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mem.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_controls.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_display.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_widget.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proc_files.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/textbox.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/volume_mapping.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/widget.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+#LDFLAGS = -static
+#CFLAGS += -g -Wall
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/alsamixer/alsamixer.1 b/alsamixer/alsamixer.1
new file mode 100644
index 0000000..8d34680
--- /dev/null
+++ b/alsamixer/alsamixer.1
@@ -0,0 +1,191 @@
+.TH ALSAMIXER 1 "22 May 2009"
+.SH NAME
+alsamixer \- soundcard mixer for ALSA soundcard driver, with ncurses interface
+.SH SYNOPSIS
+
+\fBalsamixer\fP [\fIoptions\fP]
+
+.SH DESCRIPTION
+\fBalsamixer\fP is an ncurses mixer program for use with the ALSA
+soundcard drivers. It supports multiple soundcards with multiple devices.
+
+.SH OPTIONS
+
+.TP
+\fI\-h, \-\-help\fP
+Help: show available flags.
+
+.TP
+\fI\-c, \-\-card\fP <card number or identification>
+Select the soundcard to use, if you have more than one. Cards are
+numbered from 0 (the default).
+
+.TP
+\fI\-D, \-\-device\fP <device identification>
+Select the mixer device to control.
+
+.TP
+\fI\-V, \-\-view\fP <mode>
+Select the starting view mode, either \fIplayback\fP, \fIcapture\fP or \fIall\fP.
+
+.TP
+\fI\-g, \-\-no\-color\fP
+Toggle the using of colors.
+
+.SH MIXER VIEWS
+
+The top-left corner of \fBalsamixer\fP is the are to show some basic
+information: the card name, the mixer chip name, the current view
+mode and the currently selected mixer item.
+When the mixer item is switched off, \fI[Off]\fP is displayed in its
+name.
+
+Volume bars are located below the basic information area. You can
+scroll left/right when all controls can't be put in a single screen.
+The name of each control is shown in the bottom below the volume bars.
+The currently selected item is drawn in red and/of emphasized.
+
+Each mixer control with volume capability shows a box and the current
+volume filled in that box. The volume percentages are displayed below
+the volume bar for left and right channels. For a mono control, only
+one value is shown there.
+
+When a mixer control is turned off, \fIM\fP (mute) appears below the
+volume bar. When it's turned on, \fIO\fP in green appears instead.
+You can toggle the switch via \fIm\fP key.
+
+When a mixer control has capture capability, the capture flag appears
+below the volume bar, too. When the capture is turned off,
+\-\-\-\-\-\-\- is shown. \fICAPTURE\fP in red appears when the
+capture switch is turned on. In addition, \fIL\fP and \fIR\fP letters
+appear in left and right side to indicate that left and the right
+channels are turned on.
+
+Some controls have the enumeration list, and don't show boxes but only
+texts which indicate the currently active item. You can change the
+item via up/down keys.
+
+.SH VIEW MODES
+\fBalsamixer\fP has three view modes: playback, capture and all.
+In the playback view, only the controls related with playback are shown.
+Similarly, only the controls for capture (recording) are shown in the capture
+view. The all view mode shows all controls. The current view mode is displayed
+in the top-left position together with the mixer name, etc.
+
+The default view mode is the playback view. You can change it via
+\fI-V\fP option.
+
+Each view mode can be switched via keyboard commands, too.
+See the next section.
+
+.SH KEYBOARD COMMANDS
+\fBalsamixer\fP recognizes the following keyboard commands to control the soundcard.
+Commands shown here in upper case can also be given in lower case.
+To be reminded of these keystrokes, hit the \fIh\fP key.
+
+.SS
+General Controls
+
+The \fILeft\fP and \fIright arrow\fP keys are used to select the
+channel (or device, depending on your preferred terminology). You can
+also use \fIn\fP ("next") and \fIp\fP ("previous").
+
+The \fIUp\fP and \fIDown Arrows\fP control the volume for the
+currently selected device. You can also use \fI+\fP or \fI\-\fP for the
+same purpose. Both the left and right signals are affected. For
+independent left and right control, see below.
+
+The \fIB\fP or \fI=\fP key adjusts the balance of volumes on left and
+right channels.
+
+\fIM\fP toggles muting for the current channel (both left and right).
+If the hardware supports it, you can
+mute left and right independently by using \fI,\fP (or \fI<\fP) and
+\fI.\fP (or \fI>\fP) respectively.
+
+\fISPACE\fP enables recording for the current channel. If any other
+channels have recording enabled, they will have their recording function
+disabled first. This only works for valid input channels, of course.
+
+\fIL\fP re-draws the screen.
+
+.SS
+View Mode Controls
+Function keys are used to change view modes.
+You can switch to the help mode and the proc info mode via \fIF1\fP and
+\fIF2\fP keys, respectively.
+On terminals that can't use function keys like gnome\-terminal, \fI?\fP and
+\fI/\fP keys can be used alternatively for help and proc modes.
+
+\fIF3\fP, \fIF4\fP and \fIF5\fP keys are used to switch to playback, capture
+and all view mode, respectively. \fITAB\fP key toggles the
+current view mode circularly.
+
+.SS
+Quick Volume Changes
+
+\fIPageUp\fP increases volume by 5.
+
+\fIPageDown\fP decreases volume by 5.
+
+\fIEnd\fP sets volume to 0.
+
+You can also control left & right levels for the current channel
+independently, as follows:
+
+[\fIQ\fP | \fIW\fP | \fIE\fP ] -- turn UP [ left | both | right ]
+
+[\fIZ\fP | \fIX\fP | \fIC\fP ] -- turn DOWN [ left | both | right ]
+
+If the currently selected mixer channel is not a stereo channel, then
+all UP keys will work like \fIW\fP, and all DOWN keys will work like \fIX\fP.
+
+The number keys from \fI0\fP to \fI9\fP are to change the absolute volume
+quickly. They correspond to 0 to 90% volume.
+
+.SS
+Selecting the Sound Card
+
+You can select another sound card by pressing the \fIF6\fP or \fIS\fP keys.
+This will show a list of available sound cards to choose from,
+and an entry to enter the mixer device name by hand.
+
+.SS
+Exiting
+
+Quit the program with \fIALT Q\fP, or by hitting \fIESC\fP.
+Please note that you might need to hit \fIESC\fP twice on some terminals
+since it's regarded as a prefix key.
+
+.SH VOLUME MAPPING
+In \fBalsamixer\fP, the volume is mapped to a value that is more natural
+for a human ear. The mapping is designed so that the position in the
+interval is proportional to the volume as a human ear would perceive
+it, i.e. the position is the cubic root of the linear sample
+multiplication factor. For controls with a small range (24 dB or
+less), the mapping is linear in the dB values so that each step has
+the same size visually.
+
+Only for controls without dB information, a linear mapping of the
+hardware volume register values is used (this is the same algorithm as
+used in the old \fBalsamixer\fP).
+
+.SH SEE ALSO
+\fB
+amixer(1),
+aplay(1),
+arecord(1)
+\fP
+
+.SH BUGS
+Some terminal emulators (e.g. \fBnxterm\fP) may not
+work quite right with ncurses, but that's their own damn
+fault. Plain old \fBxterm\fP seems to be fine.
+
+.SH AUTHOR
+.B alsamixer
+has been written by Tim Janik and
+been further improved by Jaroslav Kysela <perex@perex.cz>
+and Clemens Ladisch <clemens@ladisch.de>.
+
+This manual page was provided by Paul Winkler <zarmzarm@erols.com>.
diff --git a/alsamixer/card_select.c b/alsamixer/card_select.c
new file mode 100644
index 0000000..b473dcf
--- /dev/null
+++ b/alsamixer/card_select.c
@@ -0,0 +1,268 @@
+/*
+ * card_select.c - select a card by list or device name
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <alsa/asoundlib.h>
+#include <menu.h>
+#include "gettext_curses.h"
+#include "die.h"
+#include "mem.h"
+#include "utils.h"
+#include "colors.h"
+#include "widget.h"
+#include "mixer_widget.h"
+#include "device_name.h"
+#include "card_select.h"
+
+struct card {
+ struct card *next;
+ char *indexstr;
+ char *name;
+ char *device_name;
+};
+
+static struct widget list_widget;
+static struct card first_card;
+static ITEM **items;
+static MENU *menu;
+static ITEM *initial_item;
+
+static void on_key_enter(void)
+{
+ ITEM *item = current_item(menu);
+ if (item) {
+ struct card *card = item_userptr(item);
+ if (card->device_name) {
+ if (select_card_by_name(card->device_name))
+ list_widget.close();
+ } else {
+ create_device_name_form();
+ }
+ }
+}
+
+static void on_menu_key(int key)
+{
+ static const struct {
+ int key;
+ int request;
+ } key_map[] = {
+ { KEY_DOWN, REQ_DOWN_ITEM },
+ { KEY_UP, REQ_UP_ITEM },
+ { KEY_HOME, REQ_FIRST_ITEM },
+ { KEY_NPAGE, REQ_SCR_DPAGE },
+ { KEY_PPAGE, REQ_SCR_UPAGE },
+ { KEY_BEG, REQ_FIRST_ITEM },
+ { KEY_END, REQ_LAST_ITEM },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(key_map); ++i)
+ if (key_map[i].key == key) {
+ menu_driver(menu, key_map[i].request);
+ break;
+ }
+}
+
+static void on_handle_key(int key)
+{
+ switch (key) {
+ case 27:
+ case KEY_CANCEL:
+ case 'q':
+ case 'Q':
+ list_widget.close();
+ break;
+ case 10:
+ case 13:
+ case KEY_ENTER:
+ on_key_enter();
+ break;
+ default:
+ on_menu_key(key);
+ break;
+ }
+}
+
+static bool create(void)
+{
+ int rows, columns;
+ const char *title;
+
+ if (screen_lines < 3 || screen_cols < 10) {
+ beep();
+ list_widget.close();
+ return FALSE;
+ }
+ scale_menu(menu, &rows, &columns);
+ rows += 2;
+ columns += 2;
+ if (rows > screen_lines)
+ rows = screen_lines;
+ if (columns > screen_cols)
+ columns = screen_cols;
+
+ widget_init(&list_widget, rows, columns, SCREEN_CENTER, SCREEN_CENTER,
+ attr_menu, WIDGET_BORDER | WIDGET_SUBWINDOW);
+
+ title = _("Sound Card");
+ mvwprintw(list_widget.window, 0, (columns - 2 - get_mbs_width(title)) / 2, " %s ", title);
+ set_menu_win(menu, list_widget.window);
+ set_menu_sub(menu, list_widget.subwindow);
+ return TRUE;
+}
+
+static void on_window_size_changed(void)
+{
+ unpost_menu(menu);
+ if (!create())
+ return;
+ post_menu(menu);
+}
+
+static void on_close(void)
+{
+ unsigned int i;
+ struct card *card, *next_card;
+
+ unpost_menu(menu);
+ free_menu(menu);
+ for (i = 0; items[i]; ++i)
+ free_item(items[i]);
+ free(items);
+ for (card = first_card.next; card; card = next_card) {
+ next_card = card->next;
+ free(card->indexstr);
+ free(card->name);
+ free(card->device_name);
+ free(card);
+ }
+ widget_free(&list_widget);
+}
+
+void close_card_select_list(void)
+{
+ on_close();
+}
+
+static struct widget list_widget = {
+ .handle_key = on_handle_key,
+ .window_size_changed = on_window_size_changed,
+ .close = on_close,
+};
+
+static int get_cards(void)
+{
+ int count, number, err;
+ snd_ctl_t *ctl;
+ snd_ctl_card_info_t *info;
+ char buf[16];
+ struct card *card, *prev_card;
+
+ first_card.indexstr = "-";
+ first_card.name = _("(default)");
+ first_card.device_name = "default";
+ count = 1;
+
+ snd_ctl_card_info_alloca(&info);
+ prev_card = &first_card;
+ number = -1;
+ for (;;) {
+ err = snd_card_next(&number);
+ if (err < 0)
+ fatal_alsa_error(_("cannot enumerate sound cards"), err);
+ if (number < 0)
+ break;
+ sprintf(buf, "hw:%d", number);
+ err = snd_ctl_open(&ctl, buf, 0);
+ if (err < 0)
+ continue;
+ err = snd_ctl_card_info(ctl, info);
+ snd_ctl_close(ctl);
+ if (err < 0)
+ continue;
+ card = ccalloc(1, sizeof *card);
+ sprintf(buf, "%d", number);
+ card->indexstr = cstrdup(buf);
+ card->name = cstrdup(snd_ctl_card_info_get_name(info));
+ sprintf(buf, "hw:%d", number);
+ card->device_name = cstrdup(buf);
+ prev_card->next = card;
+ prev_card = card;
+ ++count;
+ }
+
+ card = ccalloc(1, sizeof *card);
+ card->indexstr = cstrdup(" ");
+ card->name = cstrdup(_("enter device name..."));
+ prev_card->next = card;
+ ++count;
+
+ return count;
+}
+
+static void create_list_items(int cards)
+{
+ int i;
+ struct card *card;
+ ITEM *item;
+
+ initial_item = NULL;
+ items = ccalloc(cards + 1, sizeof(ITEM*));
+ i = 0;
+ for (card = &first_card; card; card = card->next) {
+ item = new_item(card->indexstr, card->name);
+ if (!item)
+ fatal_error("cannot create menu item");
+ set_item_userptr(item, card);
+ items[i++] = item;
+ if (!initial_item &&
+ mixer_device_name &&
+ (!card->device_name ||
+ !strcmp(card->device_name, mixer_device_name)))
+ initial_item = item;
+ }
+ assert(i == cards);
+}
+
+void create_card_select_list(void)
+{
+ int cards;
+
+ cards = get_cards();
+ create_list_items(cards);
+
+ menu = new_menu(items);
+ if (!menu)
+ fatal_error("cannot create menu");
+ set_menu_fore(menu, attr_menu_selected);
+ set_menu_back(menu, attr_menu);
+ set_menu_mark(menu, NULL);
+ if (initial_item)
+ set_current_item(menu, initial_item);
+ set_menu_spacing(menu, 2, 1, 1);
+ menu_opts_on(menu, O_SHOWDESC);
+
+ if (!create())
+ return;
+
+ post_menu(menu);
+}
diff --git a/alsamixer/card_select.h b/alsamixer/card_select.h
new file mode 100644
index 0000000..4ba15fc
--- /dev/null
+++ b/alsamixer/card_select.h
@@ -0,0 +1,7 @@
+#ifndef CARD_SELECT_H_INCLUDED
+#define CARD_SELECT_H_INCLUDED
+
+void create_card_select_list(void);
+void close_card_select_list(void);
+
+#endif
diff --git a/alsamixer/cli.c b/alsamixer/cli.c
new file mode 100644
index 0000000..3f8f52f
--- /dev/null
+++ b/alsamixer/cli.c
@@ -0,0 +1,138 @@
+/*
+ * alsamixer - curses mixer for the ALSA project
+ * Copyright (c) 1998,1999 Tim Janik
+ * Jaroslav Kysela <perex@perex.cz>
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <locale.h>
+#include <getopt.h>
+#include <alsa/asoundlib.h>
+#include "gettext_curses.h"
+#include "mixer_widget.h"
+#include "mainloop.h"
+
+static int use_color = 1;
+static struct snd_mixer_selem_regopt selem_regopt = {
+ .ver = 1,
+ .abstract = SND_MIXER_SABSTRACT_NONE,
+ .device = "default",
+};
+
+static void show_help(void)
+{
+ puts(_("Usage: alsamixer [options]"));
+ puts(_("Useful options:\n"
+ " -h, --help this help\n"
+ " -c, --card=NUMBER sound card number or id\n"
+ " -D, --device=NAME mixer device name\n"
+ " -V, --view=MODE starting view mode: playback/capture/all"));
+ puts(_("Debugging options:\n"
+ " -g, --no-color toggle using of colors\n"
+ " -a, --abstraction=NAME mixer abstraction level: none/basic"));
+}
+
+static void parse_options(int argc, char *argv[])
+{
+ static const char short_options[] = "hc:D:V:gsa:";
+ static const struct option long_options[] = {
+ { .name = "help", .val = 'h' },
+ { .name = "card", .has_arg = 1, .val = 'c' },
+ { .name = "device", .has_arg = 1, .val = 'D' },
+ { .name = "view", .has_arg = 1, .val = 'V' },
+ { .name = "no-color", .val = 'g' },
+ { .name = "abstraction", .has_arg = 1, .val = 'a' },
+ { }
+ };
+ int option;
+ int card_index;
+ static char name_buf[16];
+
+ while ((option = getopt_long(argc, argv, short_options,
+ long_options, NULL)) != -1) {
+ switch (option) {
+ case '?':
+ case 'h':
+ show_help();
+ exit(EXIT_SUCCESS);
+ case 'c':
+ card_index = snd_card_get_index(optarg);
+ if (card_index < 0) {
+ fprintf(stderr, _("invalid card index: %s\n"), optarg);
+ goto fail;
+ }
+ sprintf(name_buf, "hw:%d", card_index);
+ selem_regopt.device = name_buf;
+ break;
+ case 'D':
+ selem_regopt.device = optarg;
+ break;
+ case 'V':
+ if (*optarg == 'p' || *optarg == 'P')
+ view_mode = VIEW_MODE_PLAYBACK;
+ else if (*optarg == 'c' || *optarg == 'C')
+ view_mode = VIEW_MODE_CAPTURE;
+ else
+ view_mode = VIEW_MODE_ALL;
+ break;
+ case 'g':
+ use_color = !use_color;
+ break;
+ case 'a':
+ if (!strcmp(optarg, "none"))
+ selem_regopt.abstract = SND_MIXER_SABSTRACT_NONE;
+ else if (!strcmp(optarg, "basic"))
+ selem_regopt.abstract = SND_MIXER_SABSTRACT_BASIC;
+ else {
+ fprintf(stderr, _("unknown abstraction level: %s\n"), optarg);
+ goto fail;
+ }
+ break;
+ default:
+ fprintf(stderr, _("unknown option: %c\n"), option);
+fail:
+ fputs(_("try `alsamixer --help' for more information\n"), stderr);
+ exit(EXIT_FAILURE);
+ }
+ }
+}
+
+int main(int argc, char *argv[])
+{
+ if (!isatty(fileno(stdin)))
+ return 0;
+
+ setlocale(LC_ALL, "");
+#ifdef ENABLE_NLS_IN_CURSES
+ textdomain(PACKAGE);
+#endif
+
+ parse_options(argc, argv);
+
+ create_mixer_object(&selem_regopt);
+
+ initialize_curses(use_color);
+
+ create_mixer_widget();
+
+ mainloop();
+
+ app_shutdown();
+ return 0;
+}
diff --git a/alsamixer/colors.c b/alsamixer/colors.c
new file mode 100644
index 0000000..b4b98e5
--- /dev/null
+++ b/alsamixer/colors.c
@@ -0,0 +1,119 @@
+/*
+ * colors.c - color and attribute definitions
+ * Copyright (c) 1998,1999 Tim Janik
+ * Jaroslav Kysela <perex@perex.cz>
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include CURSESINC
+#include "colors.h"
+
+int attr_mixer_frame;
+int attr_mixer_text;
+int attr_mixer_active;
+int attr_ctl_frame;
+int attr_ctl_mute;
+int attr_ctl_nomute;
+int attr_ctl_capture;
+int attr_ctl_nocapture;
+int attr_ctl_label;
+int attr_ctl_label_focus;
+int attr_ctl_mark_focus;
+int attr_ctl_bar_lo;
+#ifdef TRICOLOR_VOLUME_BAR
+int attr_ctl_bar_mi;
+int attr_ctl_bar_hi;
+#endif
+int attr_ctl_inactive;
+int attr_ctl_label_inactive;
+int attr_errormsg;
+int attr_infomsg;
+int attr_textbox;
+int attr_textfield;
+int attr_menu;
+int attr_menu_selected;
+
+void init_colors(int use_color)
+{
+ if (!!has_colors() == !!use_color) {
+ start_color();
+
+ init_pair(1, COLOR_CYAN, COLOR_BLACK);
+ init_pair(2, COLOR_YELLOW, COLOR_BLACK);
+ init_pair(3, COLOR_WHITE, COLOR_GREEN);
+ init_pair(4, COLOR_RED, COLOR_BLACK);
+ init_pair(5, COLOR_WHITE, COLOR_BLACK);
+ init_pair(6, COLOR_WHITE, COLOR_BLUE);
+ init_pair(7, COLOR_RED, COLOR_BLUE);
+ init_pair(8, COLOR_GREEN, COLOR_GREEN);
+ init_pair(9, COLOR_WHITE, COLOR_RED);
+#ifdef TRICOLOR_VOLUME_BAR
+ init_pair(10, COLOR_WHITE, COLOR_WHITE);
+ init_pair(11, COLOR_RED, COLOR_RED);
+#endif
+
+ attr_mixer_frame = COLOR_PAIR(1);
+ attr_mixer_text = COLOR_PAIR(1);
+ attr_mixer_active = A_BOLD | COLOR_PAIR(2);
+ attr_ctl_frame = A_BOLD | COLOR_PAIR(1);
+ attr_ctl_mute = COLOR_PAIR(1);
+ attr_ctl_nomute = A_BOLD | COLOR_PAIR(3);
+ attr_ctl_capture = A_BOLD | COLOR_PAIR(4);
+ attr_ctl_nocapture = COLOR_PAIR(5);
+ attr_ctl_label = A_BOLD | COLOR_PAIR(6);
+ attr_ctl_label_focus = A_BOLD | COLOR_PAIR(7);
+ attr_ctl_mark_focus = A_BOLD | COLOR_PAIR(4);
+ attr_ctl_bar_lo = A_BOLD | COLOR_PAIR(8);
+#ifdef TRICOLOR_VOLUME_BAR
+ attr_ctl_bar_mi = A_BOLD | COLOR_PAIR(10);
+ attr_ctl_bar_hi = A_BOLD | COLOR_PAIR(11);
+#endif
+ attr_ctl_inactive = COLOR_PAIR(5);
+ attr_ctl_label_inactive = A_REVERSE | COLOR_PAIR(5);
+ attr_errormsg = A_BOLD | COLOR_PAIR(9);
+ attr_infomsg = A_BOLD | COLOR_PAIR(6);
+ attr_textbox = A_BOLD | COLOR_PAIR(6);
+ attr_textfield = A_REVERSE | COLOR_PAIR(5);
+ attr_menu = A_BOLD | COLOR_PAIR(6);
+ attr_menu_selected = A_REVERSE | COLOR_PAIR(6);
+ } else {
+ attr_mixer_frame = A_NORMAL;
+ attr_mixer_text = A_NORMAL;
+ attr_mixer_active = A_BOLD;
+ attr_ctl_frame = A_BOLD;
+ attr_ctl_mute = A_NORMAL;
+ attr_ctl_nomute = A_BOLD;
+ attr_ctl_capture = A_BOLD;
+ attr_ctl_nocapture = A_NORMAL;
+ attr_ctl_label = A_REVERSE;
+ attr_ctl_label_focus = A_REVERSE | A_BOLD;
+ attr_ctl_mark_focus = A_BOLD;
+ attr_ctl_bar_lo = A_BOLD;
+#ifdef TRICOLOR_VOLUME_BAR
+ attr_ctl_bar_mi = A_BOLD;
+ attr_ctl_bar_hi = A_BOLD;
+#endif
+ attr_ctl_inactive = A_NORMAL;
+ attr_ctl_label_inactive = A_REVERSE;
+ attr_errormsg = A_STANDOUT;
+ attr_infomsg = A_NORMAL;
+ attr_textbox = A_NORMAL;
+ attr_textfield = A_REVERSE;
+ attr_menu = A_NORMAL;
+ attr_menu_selected = A_REVERSE;
+ }
+}
diff --git a/alsamixer/colors.h b/alsamixer/colors.h
new file mode 100644
index 0000000..9396004
--- /dev/null
+++ b/alsamixer/colors.h
@@ -0,0 +1,33 @@
+#ifndef COLORS_H_INCLUDED
+#define COLORS_H_INCLUDED
+
+#define TRICOLOR_VOLUME_BAR
+
+extern int attr_mixer_frame;
+extern int attr_mixer_text;
+extern int attr_mixer_active;
+extern int attr_ctl_frame;
+extern int attr_ctl_mute;
+extern int attr_ctl_nomute;
+extern int attr_ctl_capture;
+extern int attr_ctl_nocapture;
+extern int attr_ctl_label;
+extern int attr_ctl_label_focus;
+extern int attr_ctl_mark_focus;
+extern int attr_ctl_bar_lo;
+#ifdef TRICOLOR_VOLUME_BAR
+extern int attr_ctl_bar_mi;
+extern int attr_ctl_bar_hi;
+#endif
+extern int attr_ctl_inactive;
+extern int attr_ctl_label_inactive;
+extern int attr_errormsg;
+extern int attr_infomsg;
+extern int attr_textbox;
+extern int attr_textfield;
+extern int attr_menu;
+extern int attr_menu_selected;
+
+void init_colors(int use_color);
+
+#endif
diff --git a/alsamixer/device_name.c b/alsamixer/device_name.c
new file mode 100644
index 0000000..c58e652
--- /dev/null
+++ b/alsamixer/device_name.c
@@ -0,0 +1,197 @@
+/*
+ * device_name_form.c - ask for sound control device name
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdlib.h>
+#include <string.h>
+#include CURSESINC
+#include <form.h>
+#include "gettext_curses.h"
+#include "die.h"
+#include "mem.h"
+#include "utils.h"
+#include "colors.h"
+#include "widget.h"
+#include "mixer_widget.h"
+#include "card_select.h"
+#include "device_name.h"
+
+static struct widget form_widget;
+static FIELD *fields[3];
+static FORM *form;
+
+static char *dup_current_name(void)
+{
+ int rows, cols, max, i;
+ char *s;
+
+ if (form_driver(form, REQ_VALIDATION) == E_OK) {
+ dynamic_field_info(fields[1], &rows, &cols, &max);
+ s = ccalloc(1, cols + 1);
+ memcpy(s, field_buffer(fields[1], 0), cols);
+ for (i = strlen(s) - 1; i >= 0 && s[i] == ' '; --i)
+ s[i] = '\0';
+ return s;
+ } else {
+ return cstrdup("");
+ }
+}
+
+static void on_key_enter(void)
+{
+ char *s;
+ bool ok;
+
+ s = dup_current_name();
+ ok = select_card_by_name(s);
+ free(s);
+ if (ok) {
+ form_widget.close();
+ close_card_select_list();
+ }
+}
+
+static void on_form_key(int key)
+{
+ static const struct {
+ int key;
+ int request;
+ } key_map[] = {
+ { KEY_LEFT, REQ_PREV_CHAR },
+ { KEY_RIGHT, REQ_NEXT_CHAR },
+ { KEY_HOME, REQ_BEG_FIELD },
+ { KEY_BACKSPACE, REQ_DEL_PREV },
+ { KEY_DC, REQ_DEL_CHAR },
+ { KEY_BEG, REQ_BEG_FIELD },
+ { KEY_END, REQ_END_FIELD },
+ };
+ unsigned int i;
+
+ if (key >= 32 && key < 256) {
+ form_driver(form, key);
+ return;
+ }
+ for (i = 0; i < ARRAY_SIZE(key_map); ++i)
+ if (key_map[i].key == key) {
+ form_driver(form, key_map[i].request);
+ break;
+ }
+}
+
+static void on_handle_key(int key)
+{
+ switch (key) {
+ case 27:
+ case KEY_CANCEL:
+ form_widget.close();
+ break;
+ case 10:
+ case 13:
+ case KEY_ENTER:
+ on_key_enter();
+ break;
+ default:
+ on_form_key(key);
+ break;
+ }
+}
+
+static bool create(void)
+{
+ const char *title;
+
+ if (screen_lines < 6 || screen_cols < 36) {
+ form_widget.close();
+ beep();
+ return FALSE;
+ }
+ widget_init(&form_widget,
+ 6, 36, SCREEN_CENTER, SCREEN_CENTER,
+ attr_textbox, WIDGET_BORDER | WIDGET_SUBWINDOW | WIDGET_CURSOR_VISIBLE);
+ title = _("Sound Card");
+ mvwprintw(form_widget.window, 0, (36 - 2 - get_mbs_width(title)) / 2, " %s ", title);
+
+ set_form_win(form, form_widget.window);
+ set_form_sub(form, form_widget.subwindow);
+ return TRUE;
+}
+
+static void on_window_size_changed(void)
+{
+ form_driver(form, REQ_VALIDATION); /* save field value */
+ unpost_form(form);
+
+ if (!create())
+ return;
+
+ /*
+ * This call fails because ncurses does not allow changing options of
+ * the current field, and we cannot change the current field because
+ * there is only one. The only way to make this work would be to throw
+ * away and recreate all fields.
+ */
+ field_opts_off(fields[1], O_BLANK);
+
+ post_form(form);
+}
+
+static void on_close(void)
+{
+ unpost_form(form);
+ free_form(form);
+ free_field(fields[0]);
+ free_field(fields[1]);
+ widget_free(&form_widget);
+}
+
+static struct widget form_widget = {
+ .handle_key = on_handle_key,
+ .window_size_changed = on_window_size_changed,
+ .close = on_close,
+};
+
+void create_device_name_form(void)
+{
+ fields[0] = new_field(1, 32, 1, 1, 0, 0);
+ if (!fields[0])
+ fatal_error("cannot create field");
+ field_opts_off(fields[0], O_ACTIVE);
+ field_opts_off(fields[0], O_EDIT);
+ set_field_fore(fields[0], attr_textbox);
+ set_field_back(fields[0], attr_textbox);
+ set_field_buffer(fields[0], 0, _("Device name:"));
+
+ fields[1] = new_field(1, 32, 2, 1, 0, 0);
+ if (!fields[1])
+ fatal_error("cannot create field");
+ field_opts_off(fields[1], O_AUTOSKIP);
+ field_opts_off(fields[1], O_NULLOK);
+ field_opts_off(fields[1], O_STATIC);
+ set_field_fore(fields[1], attr_textfield);
+ set_field_back(fields[1], attr_textfield);
+ set_field_buffer(fields[1], 0, mixer_device_name);
+
+ form = new_form(fields);
+ if (!form)
+ fatal_error("cannot create form");
+
+ if (!create())
+ return;
+
+ post_form(form);
+}
diff --git a/alsamixer/device_name.h b/alsamixer/device_name.h
new file mode 100644
index 0000000..f4a1f3f
--- /dev/null
+++ b/alsamixer/device_name.h
@@ -0,0 +1,6 @@
+#ifndef DEVICE_NAME_FORM_H_INCLUDED
+#define DEVICE_NAME_FORM_H_INCLUDED
+
+void create_device_name_form(void);
+
+#endif
diff --git a/alsamixer/die.c b/alsamixer/die.c
new file mode 100644
index 0000000..899a501
--- /dev/null
+++ b/alsamixer/die.c
@@ -0,0 +1,39 @@
+/*
+ * die.c - error handlers
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <alsa/asoundlib.h>
+#include "gettext_curses.h"
+#include "mainloop.h"
+#include "die.h"
+
+void fatal_error(const char *msg)
+{
+ app_shutdown();
+ fprintf(stderr, "%s\n", msg);
+ exit(EXIT_FAILURE);
+}
+
+void fatal_alsa_error(const char *msg, int err)
+{
+ app_shutdown();
+ fprintf(stderr, _("%s: %s\n"), msg, snd_strerror(err));
+ exit(EXIT_FAILURE);
+}
diff --git a/alsamixer/die.h b/alsamixer/die.h
new file mode 100644
index 0000000..39ef1c0
--- /dev/null
+++ b/alsamixer/die.h
@@ -0,0 +1,7 @@
+#ifndef DIE_H_INCLUDED
+#define DIE_H_INCLUDED
+
+void fatal_error(const char *msg) __attribute__((__noreturn__));
+void fatal_alsa_error(const char *msg, int err) __attribute__((__noreturn__));
+
+#endif
diff --git a/alsamixer/mainloop.c b/alsamixer/mainloop.c
new file mode 100644
index 0000000..351f57f
--- /dev/null
+++ b/alsamixer/mainloop.c
@@ -0,0 +1,142 @@
+/*
+ * mainloop.c - main loop
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <poll.h>
+#include <panel.h>
+#include <alsa/asoundlib.h>
+#include "mem.h"
+#include "die.h"
+#include "colors.h"
+#include "widget.h"
+#include "mixer_widget.h"
+#include "mixer_display.h"
+#include "mainloop.h"
+
+static WINDOW *curses_initialized;
+
+static void black_hole_error_handler(const char *file, int line,
+ const char *function, int err,
+ const char *fmt, ...)
+{
+}
+
+void initialize_curses(bool use_color)
+{
+ curses_initialized = initscr();
+ cbreak();
+ noecho();
+#ifdef HAVE_CURSES_ESCDELAY
+ set_escdelay(100);
+#endif
+ window_size_changed(); /* update screen_lines/cols */
+ init_colors(use_color);
+ snd_lib_error_set_handler(black_hole_error_handler);
+}
+
+void app_shutdown(void)
+{
+ if (curses_initialized) {
+ clear();
+ refresh();
+ curs_set(1);
+ endwin();
+ }
+ mixer_shutdown();
+}
+
+void mainloop(void)
+{
+ struct pollfd *pollfds = NULL;
+ int nfds = 0, n;
+ struct widget *active_widget;
+ unsigned short revents;
+ int key;
+ int err;
+
+ for (;;) {
+ update_panels();
+ doupdate();
+
+ active_widget = get_active_widget();
+ if (!active_widget)
+ break;
+
+ n = 1 + snd_mixer_poll_descriptors_count(mixer);
+ if (n != nfds) {
+ free(pollfds);
+ nfds = n;
+ pollfds = ccalloc(nfds, sizeof *pollfds);
+ pollfds[0].fd = fileno(stdin);
+ pollfds[0].events = POLLIN;
+ }
+ err = snd_mixer_poll_descriptors(mixer, &pollfds[1], nfds - 1);
+ if (err < 0)
+ fatal_alsa_error("cannot get poll descriptors", err);
+ n = poll(pollfds, nfds, -1);
+ if (n < 0) {
+ if (errno == EINTR) {
+ pollfds[0].revents = 0;
+ doupdate(); /* handle SIGWINCH */
+ } else {
+ fatal_error("poll error");
+ }
+ }
+ if (pollfds[0].revents & (POLLERR | POLLHUP | POLLNVAL))
+ break;
+ if (pollfds[0].revents & POLLIN)
+ --n;
+ if (n > 0) {
+ err = snd_mixer_poll_descriptors_revents(mixer, &pollfds[1], nfds - 1, &revents);
+ if (err < 0)
+ fatal_alsa_error("cannot get poll events", err);
+ if (revents & (POLLERR | POLLNVAL))
+ close_mixer_device();
+ else if (revents & POLLIN)
+ snd_mixer_handle_events(mixer);
+ }
+ key = wgetch(active_widget->window);
+ while (key != ERR) {
+#ifdef KEY_RESIZE
+ if (key == KEY_RESIZE)
+ window_size_changed();
+ else
+#endif
+ active_widget->handle_key(key);
+ active_widget = get_active_widget();
+ if (!active_widget)
+ break;
+ key = wgetch(active_widget->window);
+ }
+ if (!active_widget)
+ break;
+ if (controls_changed) {
+ controls_changed = FALSE;
+ create_controls();
+ control_values_changed = FALSE;
+ display_controls();
+ } else if (control_values_changed) {
+ control_values_changed = FALSE;
+ display_controls();
+ }
+ }
+ free(pollfds);
+}
diff --git a/alsamixer/mainloop.h b/alsamixer/mainloop.h
new file mode 100644
index 0000000..22317be
--- /dev/null
+++ b/alsamixer/mainloop.h
@@ -0,0 +1,10 @@
+#ifndef MAINLOOP_H_INCLUDED
+#define MAINLOOP_H_INCLUDED
+
+#include CURSESINC
+
+void initialize_curses(bool use_color);
+void mainloop(void);
+void app_shutdown(void);
+
+#endif
diff --git a/alsamixer/mem.c b/alsamixer/mem.c
new file mode 100644
index 0000000..fa03a89
--- /dev/null
+++ b/alsamixer/mem.c
@@ -0,0 +1,68 @@
+/*
+ * mem.c - memory allocation checkers
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define _GNU_SOURCE
+#include "aconfig.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+#include "die.h"
+#include "mem.h"
+
+static void check(void *p)
+{
+ if (!p)
+ fatal_error("out of memory");
+}
+
+void *ccalloc(size_t n, size_t size)
+{
+ void *mem = calloc(n, size);
+ if (n && size)
+ check(mem);
+ return mem;
+}
+
+void *crealloc(void *ptr, size_t new_size)
+{
+ ptr = realloc(ptr, new_size);
+ if (new_size)
+ check(ptr);
+ return ptr;
+}
+
+char *cstrdup(const char *s)
+{
+ char *str = strdup(s);
+ check(str);
+ return str;
+}
+
+char *casprintf(const char *fmt, ...)
+{
+ va_list ap;
+ char *str;
+
+ va_start(ap, fmt);
+ if (vasprintf(&str, fmt, ap) < 0)
+ check(NULL);
+ va_end(ap);
+ return str;
+}
diff --git a/alsamixer/mem.h b/alsamixer/mem.h
new file mode 100644
index 0000000..d0e5f54
--- /dev/null
+++ b/alsamixer/mem.h
@@ -0,0 +1,11 @@
+#ifndef MEM_H_INCLUDED
+#define MEM_H_INCLUDED
+
+#include <stddef.h>
+
+void *ccalloc(size_t n, size_t size);
+void *crealloc(void *ptr, size_t new_size);
+char *cstrdup(const char *s);
+char *casprintf(const char *fmt, ...) __attribute__((__format__(printf, 1, 2)));
+
+#endif
diff --git a/alsamixer/mixer_controls.c b/alsamixer/mixer_controls.c
new file mode 100644
index 0000000..cc98b64
--- /dev/null
+++ b/alsamixer/mixer_controls.c
@@ -0,0 +1,521 @@
+/*
+ * mixer_controls.c - handles mixer controls and mapping from selems
+ * Copyright (c) 1998,1999 Tim Janik
+ * Jaroslav Kysela <perex@perex.cz>
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include CURSESINC
+#include <alsa/asoundlib.h>
+#include "utils.h"
+#include "mem.h"
+#include "mixer_display.h"
+#include "mixer_widget.h"
+#include "mixer_controls.h"
+
+struct control *controls;
+unsigned int controls_count;
+
+static const snd_mixer_selem_channel_id_t supported_channels[] = {
+ SND_MIXER_SCHN_FRONT_LEFT,
+ SND_MIXER_SCHN_FRONT_RIGHT,
+ SND_MIXER_SCHN_REAR_LEFT,
+ SND_MIXER_SCHN_REAR_RIGHT,
+ SND_MIXER_SCHN_FRONT_CENTER,
+ SND_MIXER_SCHN_WOOFER,
+ SND_MIXER_SCHN_SIDE_LEFT,
+ SND_MIXER_SCHN_SIDE_RIGHT,
+};
+#define LAST_SUPPORTED_CHANNEL SND_MIXER_SCHN_SIDE_RIGHT
+
+static const snd_mixer_selem_channel_id_t control_channels[][2] = {
+ { SND_MIXER_SCHN_FRONT_LEFT, SND_MIXER_SCHN_FRONT_RIGHT },
+ { SND_MIXER_SCHN_REAR_LEFT, SND_MIXER_SCHN_REAR_RIGHT },
+ { SND_MIXER_SCHN_FRONT_CENTER, SND_MIXER_SCHN_UNKNOWN },
+ { SND_MIXER_SCHN_WOOFER, SND_MIXER_SCHN_UNKNOWN },
+ { SND_MIXER_SCHN_SIDE_LEFT, SND_MIXER_SCHN_SIDE_RIGHT },
+};
+
+bool are_there_any_controls(void)
+{
+ snd_mixer_elem_t *elem;
+ unsigned int i;
+
+ for (elem = snd_mixer_first_elem(mixer);
+ elem;
+ elem = snd_mixer_elem_next(elem)) {
+ if (snd_mixer_elem_get_type(elem) != SND_MIXER_ELEM_SIMPLE)
+ continue;
+ if (snd_mixer_selem_is_enumerated(elem))
+ return TRUE;
+ if (snd_mixer_selem_has_playback_volume_joined(elem) ||
+ snd_mixer_selem_has_capture_volume_joined(elem) ||
+ snd_mixer_selem_has_playback_switch_joined(elem) ||
+ snd_mixer_selem_has_capture_switch_joined(elem))
+ return TRUE;
+ for (i = 0; i < ARRAY_SIZE(supported_channels); ++i)
+ if (snd_mixer_selem_has_playback_channel(elem, supported_channels[i]) ||
+ snd_mixer_selem_has_capture_channel(elem, supported_channels[i]))
+ return TRUE;
+ }
+ return FALSE;
+}
+
+static bool has_more_than_front_capture_channels(snd_mixer_elem_t *elem)
+{
+ unsigned int i;
+
+ for (i = 2; i < ARRAY_SIZE(supported_channels); ++i)
+ if (snd_mixer_selem_has_capture_channel(elem, supported_channels[i]))
+ return TRUE;
+ return FALSE;
+}
+
+static bool has_any_control_channel(snd_mixer_elem_t *elem,
+ const snd_mixer_selem_channel_id_t channels[2],
+ int (*has_channel)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t))
+{
+ return has_channel(elem, channels[0]) ||
+ (channels[1] != SND_MIXER_SCHN_UNKNOWN && has_channel(elem, channels[1]));
+}
+
+static bool has_merged_cswitch(snd_mixer_elem_t *elem)
+{
+ bool pvol, psw;
+ unsigned int i;
+
+ pvol = snd_mixer_selem_has_playback_volume(elem);
+ psw = snd_mixer_selem_has_playback_switch(elem);
+ if ((pvol || psw) &&
+ snd_mixer_selem_has_capture_switch(elem) &&
+ !snd_mixer_selem_has_capture_volume(elem)) {
+ if (snd_mixer_selem_has_capture_switch_joined(elem))
+ return TRUE;
+ else if (((pvol && snd_mixer_selem_has_playback_volume_joined(elem)) ||
+ (psw && snd_mixer_selem_has_playback_switch_joined(elem))) &&
+ has_more_than_front_capture_channels(elem))
+ return FALSE;
+ for (i = 0; i < ARRAY_SIZE(control_channels); ++i) {
+ if (has_any_control_channel(elem, control_channels[i], snd_mixer_selem_has_capture_channel) &&
+ !has_any_control_channel(elem, control_channels[i], snd_mixer_selem_has_playback_channel))
+ return FALSE;
+ }
+ return TRUE;
+ }
+ return FALSE;
+}
+
+static unsigned int get_playback_controls_count(snd_mixer_elem_t *elem)
+{
+ unsigned int count = 0;
+ unsigned int i;
+ int has_vol, has_sw;
+
+ has_vol = snd_mixer_selem_has_playback_volume(elem);
+ has_sw = snd_mixer_selem_has_playback_switch(elem);
+ if (!has_vol && !has_sw)
+ return 0;
+ if ((!has_vol || snd_mixer_selem_has_playback_volume_joined(elem)) &&
+ (!has_sw || snd_mixer_selem_has_playback_switch_joined(elem)))
+ return 1;
+ for (i = 0; i < ARRAY_SIZE(control_channels); ++i) {
+ if (snd_mixer_selem_has_playback_channel(elem, control_channels[i][0]) ||
+ (control_channels[i][1] != SND_MIXER_SCHN_UNKNOWN &&
+ snd_mixer_selem_has_playback_channel(elem, control_channels[i][1])))
+ ++count;
+ }
+ return count;
+}
+
+static unsigned int get_capture_controls_count(snd_mixer_elem_t *elem)
+{
+ unsigned int count = 0;
+ unsigned int i;
+ int has_vol, has_sw;
+
+ has_vol = snd_mixer_selem_has_capture_volume(elem);
+ has_sw = snd_mixer_selem_has_capture_switch(elem);
+ if ((!has_vol && !has_sw) ||
+ (view_mode == VIEW_MODE_ALL && has_merged_cswitch(elem)))
+ return 0;
+ if ((!has_vol || snd_mixer_selem_has_capture_volume_joined(elem)) &&
+ (!has_sw || snd_mixer_selem_has_capture_switch_joined(elem)))
+ return 1;
+ for (i = 0; i < ARRAY_SIZE(control_channels); ++i) {
+ if (snd_mixer_selem_has_capture_channel(elem, control_channels[i][0]) ||
+ (control_channels[i][1] != SND_MIXER_SCHN_UNKNOWN &&
+ snd_mixer_selem_has_capture_channel(elem, control_channels[i][1])))
+ ++count;
+ }
+ return count;
+}
+
+static unsigned int get_controls_count_for_elem(snd_mixer_elem_t *elem)
+{
+ unsigned int p, c;
+
+ if (snd_mixer_elem_get_type(elem) != SND_MIXER_ELEM_SIMPLE)
+ return 0;
+ if (snd_mixer_selem_is_enumerated(elem)) {
+ switch (view_mode) {
+ case VIEW_MODE_PLAYBACK:
+ return snd_mixer_selem_is_enum_capture(elem) ? 0 : 1;
+ case VIEW_MODE_CAPTURE:
+ return snd_mixer_selem_is_enum_capture(elem) ? 1 : 0;
+ case VIEW_MODE_ALL:
+ default:
+ return 1;
+ }
+ }
+ switch (view_mode) {
+ case VIEW_MODE_PLAYBACK:
+ return get_playback_controls_count(elem);
+ case VIEW_MODE_CAPTURE:
+ return get_capture_controls_count(elem);
+ case VIEW_MODE_ALL:
+ default:
+ p = get_playback_controls_count(elem);
+ c = get_capture_controls_count(elem);
+ return has_merged_cswitch(elem) ? p : p + c;
+ }
+}
+
+static void create_name(struct control *control)
+{
+ unsigned int index;
+ char *s;
+
+ index = snd_mixer_selem_get_index(control->elem);
+ if (index > 0)
+ control->name = casprintf("%s %u", snd_mixer_selem_get_name(control->elem), index);
+ else
+ control->name = cstrdup(snd_mixer_selem_get_name(control->elem));
+
+ while ((s = strstr(control->name, "IEC958")) != NULL)
+ memcpy(s, "S/PDIF", 6);
+}
+
+static unsigned int create_controls_for_elem(snd_mixer_elem_t *elem, struct control *control)
+{
+ unsigned int count = 0;
+ unsigned int i;
+ unsigned int multich_flag;
+ unsigned int enum_index;
+ struct control *front_control = NULL;
+ bool has_pvol, has_psw;
+ bool has_cvol, has_csw;
+ bool has_channel[LAST_SUPPORTED_CHANNEL + 1];
+ bool merged_cswitch;
+ bool has_ch0, has_ch1;
+
+ if (snd_mixer_elem_get_type(elem) != SND_MIXER_ELEM_SIMPLE)
+ return 0;
+ if (snd_mixer_selem_is_enumerated(elem)) {
+ if ((view_mode == VIEW_MODE_PLAYBACK && snd_mixer_selem_is_enum_capture(elem)) ||
+ (view_mode == VIEW_MODE_CAPTURE && !snd_mixer_selem_is_enum_capture(elem)))
+ return 0;
+ control->elem = elem;
+ control->flags = TYPE_ENUM;
+ control->enum_channel_bits = 0;
+ for (i = 0; i <= SND_MIXER_SCHN_LAST; ++i)
+ if (snd_mixer_selem_get_enum_item(control->elem, (snd_mixer_selem_channel_id_t)i, &enum_index) >= 0)
+ control->enum_channel_bits |= 1 << i;
+ if (snd_mixer_selem_is_active(control->elem))
+ control->flags |= IS_ACTIVE;
+ create_name(control);
+ return 1;
+ }
+ has_pvol = snd_mixer_selem_has_playback_volume(elem);
+ has_psw = snd_mixer_selem_has_playback_switch(elem);
+ has_cvol = snd_mixer_selem_has_capture_volume(elem);
+ has_csw = snd_mixer_selem_has_capture_switch(elem);
+ merged_cswitch = view_mode == VIEW_MODE_ALL && has_merged_cswitch(elem);
+ if (view_mode != VIEW_MODE_CAPTURE && (has_pvol || has_psw)) {
+ if ((!has_pvol || snd_mixer_selem_has_playback_volume_joined(elem)) &&
+ (!has_psw || snd_mixer_selem_has_playback_switch_joined(elem))) {
+ control->elem = elem;
+ if (has_pvol) {
+ control->flags |= TYPE_PVOLUME | HAS_VOLUME_0;
+ control->volume_channels[0] = 0;
+ }
+ if (has_psw) {
+ control->flags |= TYPE_PSWITCH | HAS_PSWITCH_0;
+ control->pswitch_channels[0] = 0;
+ }
+ if (merged_cswitch) {
+ control->flags |= TYPE_CSWITCH;
+ if (snd_mixer_selem_has_capture_switch_joined(elem)) {
+ control->flags |= HAS_CSWITCH_0;
+ control->cswitch_channels[0] = 0;
+ } else {
+ if (snd_mixer_selem_has_capture_channel(elem, control_channels[0][0])) {
+ control->flags |= HAS_CSWITCH_0;
+ control->cswitch_channels[0] = control_channels[0][0];
+ }
+ if (control_channels[0][1] != SND_MIXER_SCHN_UNKNOWN &&
+ snd_mixer_selem_has_capture_channel(elem, control_channels[0][1])) {
+ control->flags |= HAS_CSWITCH_1;
+ control->cswitch_channels[1] = control_channels[0][1];
+ }
+ }
+ if ((control->flags & (HAS_CSWITCH_0 | HAS_CSWITCH_1)) == HAS_CSWITCH_1) {
+ control->flags ^= HAS_CSWITCH_0 | HAS_CSWITCH_1;
+ control->cswitch_channels[0] = control->cswitch_channels[1];
+ }
+ }
+ if (snd_mixer_selem_is_active(control->elem))
+ control->flags |= IS_ACTIVE;
+ create_name(control);
+ ++control;
+ ++count;
+ } else {
+ multich_flag = 0;
+ for (i = 0; i < ARRAY_SIZE(supported_channels); ++i)
+ has_channel[supported_channels[i]] =
+ snd_mixer_selem_has_playback_channel(elem, supported_channels[i]);
+ for (i = 0; i < ARRAY_SIZE(control_channels); ++i) {
+ has_ch0 = has_channel[control_channels[i][0]];
+ has_ch1 = control_channels[i][1] != SND_MIXER_SCHN_UNKNOWN &&
+ has_channel[control_channels[i][1]];
+ if (!has_ch0 && !has_ch1)
+ continue;
+ control->elem = elem;
+ if (has_pvol) {
+ control->flags |= TYPE_PVOLUME;
+ if (snd_mixer_selem_has_playback_volume_joined(elem)) {
+ control->flags |= HAS_VOLUME_0;
+ control->volume_channels[0] = 0;
+ } else {
+ if (has_ch0) {
+ control->flags |= HAS_VOLUME_0;
+ control->volume_channels[0] = control_channels[i][0];
+ }
+ if (has_ch1) {
+ control->flags |= HAS_VOLUME_1;
+ control->volume_channels[1] = control_channels[i][1];
+ }
+ }
+ }
+ if (has_psw) {
+ control->flags |= TYPE_PSWITCH;
+ if (snd_mixer_selem_has_playback_switch_joined(elem)) {
+ control->flags |= HAS_PSWITCH_0;
+ control->pswitch_channels[0] = 0;
+ } else {
+ if (has_ch0) {
+ control->flags |= HAS_PSWITCH_0;
+ control->pswitch_channels[0] = control_channels[i][0];
+ }
+ if (has_ch1) {
+ control->flags |= HAS_PSWITCH_1;
+ control->pswitch_channels[1] = control_channels[i][1];
+ }
+ }
+ }
+ if (merged_cswitch) {
+ control->flags |= TYPE_CSWITCH;
+ if (snd_mixer_selem_has_capture_switch_joined(elem)) {
+ control->flags |= HAS_CSWITCH_0;
+ control->cswitch_channels[0] = 0;
+ } else {
+ if (snd_mixer_selem_has_capture_channel(elem, control_channels[i][0])) {
+ control->flags |= HAS_CSWITCH_0;
+ control->cswitch_channels[0] = control_channels[i][0];
+ }
+ if (control_channels[i][1] != SND_MIXER_SCHN_UNKNOWN &&
+ snd_mixer_selem_has_capture_channel(elem, control_channels[i][1])) {
+ control->flags |= HAS_CSWITCH_1;
+ control->cswitch_channels[1] = control_channels[i][1];
+ }
+ }
+ }
+ if ((control->flags & (HAS_VOLUME_0 | HAS_VOLUME_1)) == HAS_VOLUME_1) {
+ control->flags ^= HAS_VOLUME_0 | HAS_VOLUME_1;
+ control->volume_channels[0] = control->volume_channels[1];
+ }
+ if ((control->flags & (HAS_PSWITCH_0 | HAS_PSWITCH_1)) == HAS_PSWITCH_1) {
+ control->flags ^= HAS_PSWITCH_0 | HAS_PSWITCH_1;
+ control->pswitch_channels[0] = control->pswitch_channels[1];
+ }
+ if ((control->flags & (HAS_CSWITCH_0 | HAS_CSWITCH_1)) == HAS_CSWITCH_1) {
+ control->flags ^= HAS_CSWITCH_0 | HAS_CSWITCH_1;
+ control->cswitch_channels[0] = control->cswitch_channels[1];
+ }
+ if (snd_mixer_selem_is_active(control->elem))
+ control->flags |= IS_ACTIVE;
+ create_name(control);
+ if (i == 0)
+ front_control = control;
+ else {
+ front_control->flags |= IS_MULTICH | 0;
+ control->flags |= IS_MULTICH | i;
+ }
+ ++control;
+ ++count;
+ }
+ }
+ }
+ if (view_mode != VIEW_MODE_PLAYBACK && (has_cvol || has_csw) && !merged_cswitch) {
+ if ((!has_cvol || snd_mixer_selem_has_capture_volume_joined(elem)) &&
+ (!has_csw || snd_mixer_selem_has_capture_switch_joined(elem))) {
+ control->elem = elem;
+ if (has_cvol) {
+ control->flags |= TYPE_CVOLUME | HAS_VOLUME_0;
+ control->volume_channels[0] = 0;
+ }
+ if (has_csw) {
+ control->flags |= TYPE_CSWITCH | HAS_CSWITCH_0;
+ control->cswitch_channels[0] = 0;
+ }
+ if (snd_mixer_selem_is_active(control->elem))
+ control->flags |= IS_ACTIVE;
+ create_name(control);
+ ++control;
+ ++count;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(supported_channels); ++i)
+ has_channel[supported_channels[i]] =
+ snd_mixer_selem_has_capture_channel(elem, supported_channels[i]);
+ for (i = 0; i < ARRAY_SIZE(control_channels); ++i) {
+ has_ch0 = has_channel[control_channels[i][0]];
+ has_ch1 = control_channels[i][1] != SND_MIXER_SCHN_UNKNOWN &&
+ has_channel[control_channels[i][1]];
+ if (!has_ch0 && !has_ch1)
+ continue;
+ control->elem = elem;
+ if (has_cvol) {
+ control->flags |= TYPE_CVOLUME;
+ if (snd_mixer_selem_has_capture_volume_joined(elem)) {
+ control->flags |= HAS_VOLUME_0;
+ control->volume_channels[0] = 0;
+ } else {
+ if (has_ch0) {
+ control->flags |= HAS_VOLUME_0;
+ control->volume_channels[0] = control_channels[i][0];
+ }
+ if (has_ch1) {
+ control->flags |= HAS_VOLUME_1;
+ control->volume_channels[1] = control_channels[i][1];
+ }
+ }
+ }
+ if (has_csw) {
+ control->flags |= TYPE_CSWITCH;
+ if (snd_mixer_selem_has_capture_switch_joined(elem)) {
+ control->flags |= HAS_CSWITCH_0;
+ control->cswitch_channels[0] = 0;
+ } else {
+ if (has_ch0) {
+ control->flags |= HAS_CSWITCH_0;
+ control->cswitch_channels[0] = control_channels[i][0];
+ }
+ if (has_ch1) {
+ control->flags |= HAS_CSWITCH_1;
+ control->cswitch_channels[1] = control_channels[i][1];
+ }
+ }
+ }
+ if ((control->flags & (HAS_VOLUME_0 | HAS_VOLUME_1)) == HAS_VOLUME_1) {
+ control->flags ^= HAS_VOLUME_0 | HAS_VOLUME_1;
+ control->volume_channels[0] = control->volume_channels[1];
+ }
+ if ((control->flags & (HAS_CSWITCH_0 | HAS_CSWITCH_1)) == HAS_CSWITCH_1) {
+ control->flags ^= HAS_CSWITCH_0 | HAS_CSWITCH_1;
+ control->cswitch_channels[0] = control->cswitch_channels[1];
+ }
+ if (snd_mixer_selem_is_active(control->elem))
+ control->flags |= IS_ACTIVE;
+ create_name(control);
+ if (i == 0)
+ front_control = control;
+ else {
+ front_control->flags |= IS_MULTICH | 0;
+ control->flags |= IS_MULTICH | i;
+ }
+ ++control;
+ ++count;
+ }
+ }
+ }
+ return count;
+}
+
+static void search_for_focus_control(void)
+{
+ snd_mixer_elem_t *elem;
+ unsigned int i;
+
+ elem = snd_mixer_find_selem(mixer, current_selem_id);
+ if (elem)
+ for (i = 0; i < controls_count; ++i)
+ if (controls[i].elem == elem) {
+ focus_control_index = i;
+ for (;;) {
+ ++i;
+ if (i >= controls_count || controls[i].elem != elem)
+ return;
+ if (controls[i].flags == current_control_flags) {
+ focus_control_index = i;
+ return;
+ }
+ }
+ }
+ focus_control_index = 0;
+}
+
+void free_controls(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < controls_count; ++i)
+ free(controls[i].name);
+ free(controls);
+ controls = NULL;
+ controls_count = 0;
+}
+
+void create_controls(void)
+{
+ snd_mixer_elem_t *elem;
+ struct control *control;
+
+ free_controls();
+
+ for (elem = snd_mixer_first_elem(mixer);
+ elem;
+ elem = snd_mixer_elem_next(elem))
+ controls_count += get_controls_count_for_elem(elem);
+
+ if (controls_count > 0) {
+ controls = ccalloc(controls_count, sizeof *controls);
+ control = controls;
+ for (elem = snd_mixer_first_elem(mixer);
+ elem;
+ elem = snd_mixer_elem_next(elem))
+ control += create_controls_for_elem(elem, control);
+ assert(control == controls + controls_count);
+ }
+
+ compute_controls_layout();
+ display_view_mode();
+
+ search_for_focus_control();
+ refocus_control();
+}
diff --git a/alsamixer/mixer_controls.h b/alsamixer/mixer_controls.h
new file mode 100644
index 0000000..dbb3a9d
--- /dev/null
+++ b/alsamixer/mixer_controls.h
@@ -0,0 +1,37 @@
+#ifndef MIXER_CONTROLS_H_INCLUDED
+#define MIXER_CONTROLS_H_INCLUDED
+
+#include <alsa/asoundlib.h>
+
+struct control {
+ snd_mixer_elem_t *elem;
+ char *name;
+ unsigned int flags;
+#define TYPE_PVOLUME (1u << 4)
+#define TYPE_CVOLUME (1u << 5)
+#define TYPE_PSWITCH (1u << 6)
+#define TYPE_CSWITCH (1u << 7)
+#define TYPE_ENUM (1u << 8)
+#define HAS_VOLUME_0 (1u << 9)
+#define HAS_VOLUME_1 (1u << 10)
+#define HAS_PSWITCH_0 (1u << 11)
+#define HAS_PSWITCH_1 (1u << 12)
+#define HAS_CSWITCH_0 (1u << 13)
+#define HAS_CSWITCH_1 (1u << 14)
+#define IS_MULTICH (1u << 15)
+#define IS_ACTIVE (1u << 16)
+#define MULTICH_MASK (0x0000f)
+ snd_mixer_selem_channel_id_t volume_channels[2];
+ snd_mixer_selem_channel_id_t pswitch_channels[2];
+ snd_mixer_selem_channel_id_t cswitch_channels[2];
+ unsigned int enum_channel_bits;
+};
+
+extern struct control *controls;
+extern unsigned int controls_count;
+
+bool are_there_any_controls(void);
+void create_controls(void);
+void free_controls(void);
+
+#endif
diff --git a/alsamixer/mixer_display.c b/alsamixer/mixer_display.c
new file mode 100644
index 0000000..b1f79d0
--- /dev/null
+++ b/alsamixer/mixer_display.c
@@ -0,0 +1,742 @@
+/*
+ * mixer_display.c - handles displaying of mixer widget and controls
+ * Copyright (c) 1874 Lewis Carroll
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define _C99_SOURCE /* lrint() */
+#include "aconfig.h"
+#include <stdlib.h>
+#include <string.h>
+#include <strings.h>
+#include <math.h>
+#include CURSESINC
+#include <alsa/asoundlib.h>
+#include "gettext_curses.h"
+#include "utils.h"
+#include "mem.h"
+#include "colors.h"
+#include "widget.h"
+#include "volume_mapping.h"
+#include "mixer_widget.h"
+#include "mixer_controls.h"
+#include "mixer_display.h"
+
+enum align {
+ ALIGN_LEFT,
+ ALIGN_RIGHT,
+ ALIGN_CENTER,
+};
+
+static bool screen_too_small;
+static bool has_info_items;
+
+static int info_items_left;
+static int info_items_width;
+
+static int visible_controls;
+static int first_visible_control_index;
+static int first_control_x;
+static int control_width;
+static int control_name_width;
+
+static int base_y;
+static int volume_height;
+static int cswitch_y;
+static int values_y;
+static int name_y;
+static int channel_name_y;
+
+static void display_string_in_field(int y, int x, const char *s, int width, enum align align)
+{
+ int string_width;
+ const char *s_end;
+ int spaces;
+ int cur_y, cur_x;
+
+ wmove(mixer_widget.window, y, x);
+ string_width = width;
+ s_end = mbs_at_width(s, &string_width, -1);
+ if (string_width >= width) {
+ waddnstr(mixer_widget.window, s, s_end - s);
+ } else {
+ if (align != ALIGN_LEFT) {
+ spaces = width - string_width;
+ if (align == ALIGN_CENTER)
+ spaces /= 2;
+ if (spaces > 0)
+ wprintw(mixer_widget.window, "%*s", spaces, "");
+ }
+ waddstr(mixer_widget.window, s);
+ if (align != ALIGN_RIGHT) {
+ getyx(mixer_widget.window, cur_y, cur_x);
+ if (cur_y == y) {
+ spaces = x + width - cur_x;
+ if (spaces > 0)
+ wprintw(mixer_widget.window, "%*s", spaces, "");
+ }
+ }
+ }
+}
+
+void init_mixer_layout(void)
+{
+ const char *labels_left[4] = {
+ _("Card:"),
+ _("Chip:"),
+ _("View:"),
+ _("Item:"),
+ };
+ const char *labels_right[4] = {
+ _("F1: Help"),
+ _("F2: System information"),
+ _("F6: Select sound card"),
+ _("Esc: Exit"),
+ };
+ unsigned int label_width_left, label_width_right;
+ unsigned int right_x, i;
+
+ screen_too_small = screen_lines < 14 || screen_cols < 12;
+ has_info_items = screen_lines >= 6;
+ if (!has_info_items)
+ return;
+
+ label_width_left = get_max_mbs_width(labels_left, 4);
+ label_width_right = get_max_mbs_width(labels_right, 4);
+ if (2 + label_width_left + 1 + 28 + label_width_right + 2 > screen_cols)
+ label_width_right = 0;
+ if (2 + label_width_left + 1 + 28 + label_width_right + 2 > screen_cols)
+ label_width_left = 0;
+
+ info_items_left = label_width_left ? 3 + label_width_left : 2;
+ right_x = screen_cols - label_width_right - 2;
+ info_items_width = right_x - info_items_left;
+ if (info_items_width < 1) {
+ has_info_items = FALSE;
+ return;
+ }
+
+ wattrset(mixer_widget.window, attr_mixer_text);
+ if (label_width_left)
+ for (i = 0; i < 4; ++i)
+ display_string_in_field(1 + i, 2, labels_left[i],
+ label_width_left, ALIGN_RIGHT);
+ if (label_width_right)
+ for (i = 0; i < 4; ++i)
+ display_string_in_field(1 + i, right_x, labels_right[i],
+ label_width_right, ALIGN_LEFT);
+}
+
+void display_card_info(void)
+{
+ snd_hctl_t *hctl;
+ snd_ctl_t *ctl;
+ snd_ctl_card_info_t *card_info;
+ const char *card_name = NULL;
+ const char *mixer_name = NULL;
+ int err;
+
+ if (!has_info_items)
+ return;
+
+ snd_ctl_card_info_alloca(&card_info);
+ if (mixer_device_name)
+ err = snd_mixer_get_hctl(mixer, mixer_device_name, &hctl);
+ else
+ err = -1;
+ if (err >= 0) {
+ ctl = snd_hctl_ctl(hctl);
+ err = snd_ctl_card_info(ctl, card_info);
+ if (err >= 0) {
+ card_name = snd_ctl_card_info_get_name(card_info);
+ mixer_name = snd_ctl_card_info_get_mixername(card_info);
+ }
+ }
+
+ if (card_name)
+ wattrset(mixer_widget.window, attr_mixer_active);
+ else {
+ wattrset(mixer_widget.window, attr_mixer_text);
+ if (unplugged)
+ card_name = _("(unplugged)");
+ else
+ card_name = "-";
+ }
+ display_string_in_field(1, info_items_left, card_name, info_items_width, ALIGN_LEFT);
+
+ if (mixer_name)
+ wattrset(mixer_widget.window, attr_mixer_active);
+ else {
+ wattrset(mixer_widget.window, attr_mixer_text);
+ mixer_name = "-";
+ }
+ display_string_in_field(2, info_items_left, mixer_name, info_items_width, ALIGN_LEFT);
+}
+
+void display_view_mode(void)
+{
+ const char *modes[3] = {
+ _("Playback"),
+ _("Capture"),
+ _("All"),
+ };
+ unsigned int widths[3];
+ bool has_view_mode;
+ int i;
+
+ if (!has_info_items)
+ return;
+
+ has_view_mode = controls_count > 0 || are_there_any_controls();
+ for (i = 0; i < 3; ++i)
+ widths[i] = get_mbs_width(modes[i]);
+ if (4 + widths[0] + 6 + widths[1] + 6 + widths[2] + 1 <= info_items_width) {
+ wmove(mixer_widget.window, 3, info_items_left);
+ wattrset(mixer_widget.window, attr_mixer_text);
+ for (i = 0; i < 3; ++i) {
+ wprintw(mixer_widget.window, "F%c:", '3' + i);
+ if (has_view_mode && (int)view_mode == i) {
+ wattrset(mixer_widget.window, attr_mixer_active);
+ wprintw(mixer_widget.window, "[%s]", modes[i]);
+ wattrset(mixer_widget.window, attr_mixer_text);
+ } else {
+ wprintw(mixer_widget.window, " %s ", modes[i]);
+ }
+ if (i < 2)
+ waddch(mixer_widget.window, ' ');
+ }
+ } else {
+ wattrset(mixer_widget.window, attr_mixer_active);
+ display_string_in_field(3, info_items_left,
+ has_view_mode ? modes[view_mode] : "",
+ info_items_width, ALIGN_LEFT);
+ }
+}
+
+static char *format_gain(long db)
+{
+ if (db != SND_CTL_TLV_DB_GAIN_MUTE)
+ return casprintf("%.2f", db / 100.0);
+ else
+ return cstrdup(_("mute"));
+}
+
+static void display_focus_item_info(void)
+{
+ struct control *control;
+ unsigned int index;
+ char buf[64];
+ long db, db2;
+ int sw, sw2;
+ char *dbs, *dbs2;
+ char *value_info;
+ char *item_info;
+ int err;
+
+ if (!has_info_items)
+ return;
+ wattrset(mixer_widget.window, attr_mixer_active);
+ if (!controls_count || screen_too_small) {
+ display_string_in_field(4, info_items_left, "", info_items_width, ALIGN_LEFT);
+ return;
+ }
+ control = &controls[focus_control_index];
+ value_info = NULL;
+ if (control->flags & TYPE_ENUM) {
+ err = snd_mixer_selem_get_enum_item(control->elem, ffs(control->enum_channel_bits) - 1, &index);
+ if (err >= 0)
+ err = snd_mixer_selem_get_enum_item_name(control->elem, index, sizeof buf - 1, buf);
+ if (err >= 0)
+ value_info = casprintf(" [%s]", buf);
+ } else if (control->flags & (TYPE_PVOLUME | TYPE_CVOLUME)) {
+ int (*get_vol_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, long *);
+
+ if (control->flags & TYPE_PVOLUME)
+ get_vol_func = snd_mixer_selem_get_playback_dB;
+ else
+ get_vol_func = snd_mixer_selem_get_capture_dB;
+ if (!(control->flags & HAS_VOLUME_1)) {
+ err = get_vol_func(control->elem, control->volume_channels[0], &db);
+ if (err >= 0) {
+ dbs = format_gain(db);
+ value_info = casprintf(" [%s %s]", _("dB gain:"), dbs);
+ free(dbs);
+ }
+ } else {
+ err = get_vol_func(control->elem, control->volume_channels[0], &db);
+ if (err >= 0)
+ err = get_vol_func(control->elem, control->volume_channels[1], &db2);
+ if (err >= 0) {
+ dbs = format_gain(db);
+ dbs2 = format_gain(db2);
+ value_info = casprintf(_(" [%s %s, %s]"), _("dB gain:"), dbs, dbs2);
+ free(dbs);
+ free(dbs2);
+ }
+ }
+ } else if (control->flags & TYPE_PSWITCH) {
+ if (!(control->flags & HAS_PSWITCH_1)) {
+ err = snd_mixer_selem_get_playback_switch(control->elem, control->pswitch_channels[0], &sw);
+ if (err >= 0 && !sw)
+ value_info = casprintf(" [%s]", _("Off"));
+ } else {
+ err = snd_mixer_selem_get_playback_switch(control->elem, control->pswitch_channels[0], &sw);
+ if (err >= 0)
+ err = snd_mixer_selem_get_playback_switch(control->elem, control->pswitch_channels[1], &sw2);
+ if (err >= 0 && (!sw || !sw2))
+ value_info = casprintf(" [%s, %s]", sw ? _("On") : _("Off"), sw2 ? _("On") : _("Off"));
+ }
+ } else if (control->flags & TYPE_CSWITCH) {
+ if (!(control->flags & HAS_CSWITCH_1)) {
+ err = snd_mixer_selem_get_capture_switch(control->elem, control->cswitch_channels[0], &sw);
+ if (err >= 0 && !sw)
+ value_info = casprintf(" [%s]", _("Off"));
+ } else {
+ err = snd_mixer_selem_get_capture_switch(control->elem, control->cswitch_channels[0], &sw);
+ if (err >= 0)
+ err = snd_mixer_selem_get_capture_switch(control->elem, control->cswitch_channels[1], &sw2);
+ if (err >= 0 && (!sw || !sw2))
+ value_info = casprintf(" [%s, %s]", sw ? _("On") : _("Off"), sw2 ? _("On") : _("Off"));
+ }
+ }
+ item_info = casprintf("%s%s", control->name, value_info ? value_info : "");
+ free(value_info);
+ display_string_in_field(4, info_items_left, item_info, info_items_width, ALIGN_LEFT);
+ free(item_info);
+}
+
+static void clear_controls_display(void)
+{
+ int i;
+
+ wattrset(mixer_widget.window, attr_mixer_frame);
+ for (i = 5; i < screen_lines - 1; ++i)
+ mvwprintw(mixer_widget.window, i, 1, "%*s", screen_cols - 2, "");
+}
+
+static void center_string(int line, const char *s)
+{
+ int width = get_mbs_width(s);
+ if (width <= screen_cols - 2)
+ mvwaddstr(mixer_widget.window, line, (screen_cols - width) / 2, s);
+}
+
+static void display_unplugged(void)
+{
+ int lines, top, left;
+ bool boojum;
+
+ lines = screen_lines - 6;
+ if (lines < 2)
+ return;
+ top = lines / 2;
+ boojum = lines >= 10 && screen_cols >= 48;
+ top -= boojum ? 5 : 1;
+ if (top < 5)
+ top = 5;
+ if (boojum) {
+ left = (screen_cols - 46) / 2;
+ wattrset(mixer_widget.window, attr_mixer_text);
+ mvwaddstr(mixer_widget.window, top + 0, left, "In the midst of the word he was trying to say,");
+ mvwaddstr(mixer_widget.window, top + 1, left + 2, "In the midst of his laughter and glee,");
+ mvwaddstr(mixer_widget.window, top + 2, left, "He had softly and suddenly vanished away---");
+ mvwaddstr(mixer_widget.window, top + 3, left + 2, "For the Snark was a Boojum, you see.");
+ mvwchgat(mixer_widget.window, top + 3, left + 16, 3, /* ^^^ */
+ attr_mixer_text | A_BOLD, PAIR_NUMBER(attr_mixer_text), NULL);
+ mvwaddstr(mixer_widget.window, top + 5, left, "(Lewis Carroll, \"The Hunting of the Snark\")");
+ top += 8;
+ }
+ wattrset(mixer_widget.window, attr_errormsg);
+ center_string(top, _("The sound device was unplugged."));
+ center_string(top + 1, _("Press F6 to select another sound card."));
+}
+
+static void display_no_controls(void)
+{
+ int y;
+ const char *msg;
+
+ y = (screen_lines - 6) / 2 - 1;
+ if (y < 5)
+ y = 5;
+ if (y >= screen_lines - 1)
+ return;
+ wattrset(mixer_widget.window, attr_infomsg);
+ if (view_mode == VIEW_MODE_PLAYBACK && are_there_any_controls())
+ msg = _("This sound device does not have any playback controls.");
+ else if (view_mode == VIEW_MODE_CAPTURE && are_there_any_controls())
+ msg = _("This sound device does not have any capture controls.");
+ else
+ msg = _("This sound device does not have any controls.");
+ center_string(y, msg);
+}
+
+static void display_string_centered_in_control(int y, int col, const char *s, int width)
+{
+ int left, x;
+
+ left = first_control_x + col * (control_width + 1);
+ x = left + (control_width - width) / 2;
+ display_string_in_field(y, x, s, width, ALIGN_CENTER);
+}
+
+static void display_control(unsigned int control_index)
+{
+ struct control *control;
+ int col;
+ int i, c;
+ int left, frame_left;
+ int bar_height;
+ double volumes[2];
+ int switches[2];
+ unsigned int index;
+ const char *s;
+ char buf[64];
+ int err;
+
+ control = &controls[control_index];
+ col = control_index - first_visible_control_index;
+ left = first_control_x + col * (control_width + 1);
+ frame_left = left + (control_width - 4) / 2;
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_ctl_frame);
+ else
+ wattrset(mixer_widget.window, attr_ctl_inactive);
+ if (control->flags & (TYPE_PVOLUME | TYPE_CVOLUME)) {
+ mvwaddch(mixer_widget.window, base_y - volume_height - 1, frame_left, ACS_ULCORNER);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_URCORNER);
+ for (i = 0; i < volume_height; ++i) {
+ mvwaddch(mixer_widget.window, base_y - i - 1, frame_left, ACS_VLINE);
+ mvwaddch(mixer_widget.window, base_y - i - 1, frame_left + 3, ACS_VLINE);
+ }
+ mvwaddch(mixer_widget.window, base_y, frame_left,
+ control->flags & TYPE_PSWITCH ? ACS_LTEE : ACS_LLCORNER);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window,
+ control->flags & TYPE_PSWITCH ? ACS_RTEE : ACS_LRCORNER);
+ } else if (control->flags & TYPE_PSWITCH) {
+ mvwaddch(mixer_widget.window, base_y, frame_left, ACS_ULCORNER);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_URCORNER);
+ }
+ if (control->flags & TYPE_PSWITCH) {
+ mvwaddch(mixer_widget.window, base_y + 1, frame_left, ACS_VLINE);
+ mvwaddch(mixer_widget.window, base_y + 1, frame_left + 3, ACS_VLINE);
+ mvwaddch(mixer_widget.window, base_y + 2, frame_left, ACS_LLCORNER);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_HLINE);
+ waddch(mixer_widget.window, ACS_LRCORNER);
+ }
+ if (control->flags & (TYPE_PVOLUME | TYPE_CVOLUME)) {
+ double (*get_vol_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t);
+
+ if (control->flags & TYPE_PVOLUME)
+ get_vol_func = get_normalized_playback_volume;
+ else
+ get_vol_func = get_normalized_capture_volume;
+ volumes[0] = get_vol_func(control->elem, control->volume_channels[0]);
+ if (control->flags & HAS_VOLUME_1)
+ volumes[1] = get_vol_func(control->elem, control->volume_channels[1]);
+ else
+ volumes[1] = volumes[0];
+
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, 0);
+ for (c = 0; c < 2; c++) {
+ bar_height = lrint(volumes[c] * volume_height);
+ for (i = 0; i < volume_height; ++i) {
+ chtype ch;
+ if (i + 1 > bar_height)
+ ch = ' ' | (control->flags & IS_ACTIVE ?
+ attr_ctl_frame : 0);
+ else {
+ ch = ACS_CKBOARD;
+ if (!(control->flags & IS_ACTIVE))
+ ;
+#ifdef TRICOLOR_VOLUME_BAR
+ else if (i > volume_height * 8 / 10)
+ ch |= attr_ctl_bar_hi;
+ else if (i > volume_height * 4 / 10)
+ ch |= attr_ctl_bar_mi;
+#endif
+ else
+ ch |= attr_ctl_bar_lo;
+ }
+ mvwaddch(mixer_widget.window, base_y - i - 1,
+ frame_left + c + 1, ch);
+ }
+ }
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_mixer_active);
+ if (!(control->flags & HAS_VOLUME_1)) {
+ sprintf(buf, "%d", (int)lrint(volumes[0] * 100));
+ display_string_in_field(values_y, frame_left - 2, buf, 8, ALIGN_CENTER);
+ } else {
+ mvwprintw(mixer_widget.window, values_y, frame_left - 2,
+ "%3d", (int)lrint(volumes[0] * 100));
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_ctl_frame);
+ waddstr(mixer_widget.window, "<>");
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_mixer_active);
+ wprintw(mixer_widget.window, "%-3d", (int)lrint(volumes[1] * 100));
+ }
+ }
+
+ if (control->flags & TYPE_PSWITCH) {
+ err = snd_mixer_selem_get_playback_switch(control->elem, control->pswitch_channels[0], &switches[0]);
+ if (err >= 0 && (control->flags & HAS_PSWITCH_1))
+ err = snd_mixer_selem_get_playback_switch(control->elem, control->pswitch_channels[1], &switches[1]);
+ else
+ switches[1] = switches[0];
+ if (err < 0)
+ return;
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, 0);
+ mvwaddch(mixer_widget.window, base_y + 1, frame_left + 1,
+ switches[0]
+ /* TRANSLATORS: playback on; one character */
+ ? _("O")[0] | (control->flags & IS_ACTIVE ? attr_ctl_nomute : 0)
+ /* TRANSLATORS: playback muted; one character */
+ : _("M")[0] | (control->flags & IS_ACTIVE ? attr_ctl_mute : 0));
+ waddch(mixer_widget.window,
+ switches[1]
+ ? _("O")[0] | (control->flags & IS_ACTIVE ? attr_ctl_nomute : 0)
+ : _("M")[0] | (control->flags & IS_ACTIVE ? attr_ctl_mute : 0));
+ }
+
+ if (control->flags & TYPE_CSWITCH) {
+ err = snd_mixer_selem_get_capture_switch(control->elem, control->cswitch_channels[0], &switches[0]);
+ if (err >= 0 && (control->flags & HAS_CSWITCH_1))
+ err = snd_mixer_selem_get_capture_switch(control->elem, control->cswitch_channels[1], &switches[1]);
+ else
+ switches[1] = switches[0];
+ if (err < 0)
+ return;
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, switches[0] ? attr_ctl_capture : attr_ctl_nocapture);
+ /* TRANSLATORS: "left"; no more than two characters */
+ display_string_in_field(cswitch_y - 1, frame_left - 2, switches[0] ? _("L") : "", 2, ALIGN_RIGHT);
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, switches[1] ? attr_ctl_capture : attr_ctl_nocapture);
+ /* TRANSLATORS: "right"; no more than two characters */
+ display_string_in_field(cswitch_y - 1, frame_left + 4, switches[1] ? _("R") : "", 2, ALIGN_LEFT);
+ /* TRANSLATORS: no more than eight characters */
+ s = _("CAPTURE");
+ if (switches[0] || switches[1]) {
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_ctl_capture);
+ display_string_in_field(cswitch_y, frame_left - 2, s, 8, ALIGN_CENTER);
+ } else {
+ i = get_mbs_width(s);
+ if (i > 8)
+ i = 8;
+ memset(buf, '-', i);
+ buf[i] = '\0';
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_ctl_nocapture);
+ display_string_in_field(cswitch_y, frame_left - 2, buf, 8, ALIGN_CENTER);
+ }
+ }
+
+ if (control->flags & TYPE_ENUM) {
+ err = snd_mixer_selem_get_enum_item(control->elem, ffs(control->enum_channel_bits) - 1, &index);
+ if (err < 0)
+ return;
+ err = snd_mixer_selem_get_enum_item_name(control->elem, index, sizeof buf - 1, buf);
+ if (err < 0)
+ return;
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_mixer_active);
+ display_string_centered_in_control(base_y, col, buf, control_width);
+ }
+
+ if (control_index == focus_control_index) {
+ i = first_control_x + col * (control_width + 1) + (control_width - control_name_width) / 2;
+ wattrset(mixer_widget.window, attr_ctl_mark_focus);
+ mvwaddch(mixer_widget.window, name_y, i - 1, '<');
+ mvwaddch(mixer_widget.window, name_y, i + control_name_width, '>');
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_ctl_label_focus);
+ else
+ wattrset(mixer_widget.window, attr_ctl_label_inactive);
+ } else {
+ if (control->flags & IS_ACTIVE)
+ wattrset(mixer_widget.window, attr_ctl_label);
+ else
+ wattrset(mixer_widget.window, attr_ctl_label_inactive);
+ }
+ display_string_centered_in_control(name_y, col, control->name, control_name_width);
+ if (channel_name_y > name_y) {
+ if (control->flags & IS_MULTICH) {
+ switch (control->flags & MULTICH_MASK) {
+ case 0:
+ default:
+ s = _("Front");
+ break;
+ case 1:
+ s = _("Rear");
+ break;
+ case 2:
+ s = _("Center");
+ break;
+ case 3:
+ s = _("Woofer");
+ break;
+ case 4:
+ s = _("Side");
+ break;
+ }
+ } else {
+ s = "";
+ wattrset(mixer_widget.window, attr_mixer_frame);
+ }
+ display_string_centered_in_control(channel_name_y, col, s,
+ control_name_width);
+ }
+}
+
+static void display_scroll_indicators(void)
+{
+ int y0, y1, y;
+ chtype left, right;
+
+ if (screen_too_small)
+ return;
+ y0 = screen_lines * 3 / 8;
+ y1 = screen_lines * 5 / 8;
+ left = first_visible_control_index > 0 ? ACS_LARROW : ACS_VLINE;
+ right = first_visible_control_index + visible_controls < controls_count
+ ? ACS_RARROW : ACS_VLINE;
+ wattrset(mixer_widget.window, attr_mixer_frame);
+ for (y = y0; y <= y1; ++y) {
+ mvwaddch(mixer_widget.window, y, 0, left);
+ mvwaddch(mixer_widget.window, y, screen_cols - 1, right);
+ }
+}
+
+void display_controls(void)
+{
+ unsigned int i;
+
+ if (first_visible_control_index > controls_count - visible_controls)
+ first_visible_control_index = controls_count - visible_controls;
+ if (first_visible_control_index > focus_control_index)
+ first_visible_control_index = focus_control_index;
+ else if (first_visible_control_index < focus_control_index - visible_controls + 1 && visible_controls)
+ first_visible_control_index = focus_control_index - visible_controls + 1;
+
+ clear_controls_display();
+
+ display_focus_item_info();
+
+ if (controls_count > 0) {
+ if (!screen_too_small)
+ for (i = 0; i < visible_controls; ++i)
+ display_control(first_visible_control_index + i);
+ } else if (unplugged) {
+ display_unplugged();
+ } else if (mixer_device_name) {
+ display_no_controls();
+ }
+ display_scroll_indicators();
+}
+
+void compute_controls_layout(void)
+{
+ bool any_volume, any_pswitch, any_cswitch, any_multich;
+ int max_width, name_len;
+ int height, space;
+ unsigned int i;
+
+ if (controls_count == 0 || screen_too_small) {
+ visible_controls = 0;
+ return;
+ }
+
+ any_volume = FALSE;
+ any_pswitch = FALSE;
+ any_cswitch = FALSE;
+ any_multich = FALSE;
+ for (i = 0; i < controls_count; ++i) {
+ if (controls[i].flags & (TYPE_PVOLUME | TYPE_CVOLUME))
+ any_volume = 1;
+ if (controls[i].flags & TYPE_PSWITCH)
+ any_pswitch = 1;
+ if (controls[i].flags & TYPE_CSWITCH)
+ any_cswitch = 1;
+ if (controls[i].flags & IS_MULTICH)
+ any_multich = 1;
+ }
+
+ max_width = 8;
+ for (i = 0; i < controls_count; ++i) {
+ name_len = strlen(controls[i].name);
+ if (name_len > max_width)
+ max_width = name_len;
+ }
+ max_width = (max_width + 1) & ~1;
+
+ control_width = (screen_cols - 3 - (int)controls_count) / controls_count;
+ if (control_width < 8)
+ control_width = 8;
+ if (control_width > max_width)
+ control_width = max_width;
+ if (control_width > screen_cols - 4)
+ control_width = screen_cols - 4;
+
+ visible_controls = (screen_cols - 3) / (control_width + 1);
+ if (visible_controls > controls_count)
+ visible_controls = controls_count;
+
+ first_control_x = 2 + (screen_cols - 3 - visible_controls * (control_width + 1)) / 2;
+
+ if (control_width < max_width)
+ control_name_width = control_width;
+ else
+ control_name_width = max_width;
+
+ height = 2;
+ if (any_volume)
+ height += 2;
+ if (any_pswitch)
+ height += 2;
+ if (any_cswitch)
+ height += 1;
+ if (any_multich)
+ height += 1;
+ if (any_volume) {
+ space = screen_lines - 6 - height;
+ if (space <= 1)
+ volume_height = 1;
+ else if (space <= 10)
+ volume_height = space;
+ else
+ volume_height = 10 + (space - 10) / 2;
+ height += volume_height;
+ }
+
+ space = screen_lines - 6 - height;
+ channel_name_y = screen_lines - 2 - space / 2;
+ name_y = channel_name_y - any_multich;
+ values_y = name_y - any_volume;
+ cswitch_y = values_y - any_cswitch;
+ base_y = cswitch_y - 1 - 2 * any_pswitch;
+}
diff --git a/alsamixer/mixer_display.h b/alsamixer/mixer_display.h
new file mode 100644
index 0000000..3d65670
--- /dev/null
+++ b/alsamixer/mixer_display.h
@@ -0,0 +1,10 @@
+#ifndef MIXER_DISPLAY_H_INCLUDED
+#define MIXER_DISPLAY_H_INCLUDED
+
+void init_mixer_layout(void);
+void display_card_info(void);
+void display_view_mode(void);
+void display_controls(void);
+void compute_controls_layout(void);
+
+#endif
diff --git a/alsamixer/mixer_widget.c b/alsamixer/mixer_widget.c
new file mode 100644
index 0000000..0c2b9e0
--- /dev/null
+++ b/alsamixer/mixer_widget.c
@@ -0,0 +1,657 @@
+/*
+ * mixer_widget.c - mixer widget and keys handling
+ * Copyright (c) 1998,1999 Tim Janik
+ * Jaroslav Kysela <perex@perex.cz>
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <alsa/asoundlib.h>
+#include "gettext_curses.h"
+#include "version.h"
+#include "utils.h"
+#include "die.h"
+#include "mem.h"
+#include "colors.h"
+#include "widget.h"
+#include "textbox.h"
+#include "proc_files.h"
+#include "card_select.h"
+#include "volume_mapping.h"
+#include "mixer_controls.h"
+#include "mixer_display.h"
+#include "mixer_widget.h"
+
+snd_mixer_t *mixer;
+char *mixer_device_name;
+bool unplugged;
+
+struct widget mixer_widget;
+
+enum view_mode view_mode;
+
+int focus_control_index;
+snd_mixer_selem_id_t *current_selem_id;
+unsigned int current_control_flags;
+
+bool control_values_changed;
+bool controls_changed;
+
+enum channel_mask {
+ LEFT = 1,
+ RIGHT = 2,
+};
+
+static int elem_callback(snd_mixer_elem_t *elem, unsigned int mask)
+{
+ if (mask == SND_CTL_EVENT_MASK_REMOVE) {
+ controls_changed = TRUE;
+ } else {
+ if (mask & SND_CTL_EVENT_MASK_VALUE)
+ control_values_changed = TRUE;
+
+ if (mask & SND_CTL_EVENT_MASK_INFO)
+ controls_changed = TRUE;
+ }
+
+ return 0;
+}
+
+static int mixer_callback(snd_mixer_t *mixer, unsigned int mask, snd_mixer_elem_t *elem)
+{
+ if (mask & SND_CTL_EVENT_MASK_ADD) {
+ snd_mixer_elem_set_callback(elem, elem_callback);
+ controls_changed = TRUE;
+ }
+ return 0;
+}
+
+void create_mixer_object(struct snd_mixer_selem_regopt *selem_regopt)
+{
+ int err;
+
+ err = snd_mixer_open(&mixer, 0);
+ if (err < 0)
+ fatal_alsa_error(_("cannot open mixer"), err);
+
+ mixer_device_name = cstrdup(selem_regopt->device);
+ err = snd_mixer_selem_register(mixer, selem_regopt, NULL);
+ if (err < 0)
+ fatal_alsa_error(_("cannot open mixer"), err);
+
+ snd_mixer_set_callback(mixer, mixer_callback);
+
+ err = snd_mixer_load(mixer);
+ if (err < 0)
+ fatal_alsa_error(_("cannot load mixer controls"), err);
+
+ err = snd_mixer_selem_id_malloc(¤t_selem_id);
+ if (err < 0)
+ fatal_error("out of memory");
+}
+
+static void set_view_mode(enum view_mode m)
+{
+ view_mode = m;
+ create_controls();
+}
+
+static void close_hctl(void)
+{
+ free_controls();
+ if (mixer_device_name) {
+ snd_mixer_detach(mixer, mixer_device_name);
+ free(mixer_device_name);
+ mixer_device_name = NULL;
+ }
+}
+
+static void check_unplugged(void)
+{
+ snd_hctl_t *hctl;
+ snd_ctl_t *ctl;
+ unsigned int state;
+ int err;
+
+ unplugged = FALSE;
+ if (mixer_device_name) {
+ err = snd_mixer_get_hctl(mixer, mixer_device_name, &hctl);
+ if (err >= 0) {
+ ctl = snd_hctl_ctl(hctl);
+ /* just any random function that does an ioctl() */
+ err = snd_ctl_get_power_state(ctl, &state);
+ if (err == -ENODEV)
+ unplugged = TRUE;
+ }
+ }
+}
+
+void close_mixer_device(void)
+{
+ check_unplugged();
+ close_hctl();
+
+ display_card_info();
+ set_view_mode(view_mode);
+}
+
+bool select_card_by_name(const char *device_name)
+{
+ int err;
+ bool opened;
+ char *msg;
+
+ close_hctl();
+ unplugged = FALSE;
+
+ opened = FALSE;
+ if (device_name) {
+ err = snd_mixer_attach(mixer, device_name);
+ if (err >= 0)
+ opened = TRUE;
+ else {
+ msg = casprintf(_("Cannot open mixer device '%s'."), device_name);
+ show_alsa_error(msg, err);
+ free(msg);
+ }
+ }
+ if (opened) {
+ mixer_device_name = cstrdup(device_name);
+
+ err = snd_mixer_load(mixer);
+ if (err < 0)
+ fatal_alsa_error(_("cannot load mixer controls"), err);
+ }
+
+ display_card_info();
+ set_view_mode(view_mode);
+ return opened;
+}
+
+static void show_help(void)
+{
+ const char *help[] = {
+ _("Esc Exit"),
+ _("F1 ? H Help"),
+ _("F2 / System information"),
+ _("F3 Show playback controls"),
+ _("F4 Show capture controls"),
+ _("F5 Show all controls"),
+ _("Tab Toggle view mode (F3/F4/F5)"),
+ _("F6 S Select sound card"),
+ _("L Redraw screen"),
+ "",
+ _("Left Move to the previous control"),
+ _("Right Move to the next control"),
+ "",
+ _("Up/Down Change volume"),
+ _("+ - Change volume"),
+ _("Page Up/Dn Change volume in big steps"),
+ _("End Set volume to 0%"),
+ _("0-9 Set volume to 0%-90%"),
+ _("Q W E Increase left/both/right volumes"),
+ /* TRANSLATORS: or Y instead of Z */
+ _("Z X C Decrease left/both/right volumes"),
+ _("B Balance left and right volumes"),
+ "",
+ _("M Toggle mute"),
+ /* TRANSLATORS: or , . */
+ _("< > Toggle left/right mute"),
+ "",
+ _("Space Toggle capture"),
+ /* TRANSLATORS: or Insert Delete */
+ _("; ' Toggle left/right capture"),
+ "",
+ _("Authors:"),
+ _(" Tim Janik"),
+ _(" Jaroslav Kysela <perex@perex.cz>"),
+ _(" Clemens Ladisch <clemens@ladisch.de>"),
+ };
+ show_text(help, ARRAY_SIZE(help), _("Help"));
+}
+
+void refocus_control(void)
+{
+ if (focus_control_index < controls_count) {
+ snd_mixer_selem_get_id(controls[focus_control_index].elem, current_selem_id);
+ current_control_flags = controls[focus_control_index].flags;
+ }
+
+ display_controls();
+}
+
+static struct control *get_focus_control(unsigned int type)
+{
+ if (focus_control_index >= 0 &&
+ focus_control_index < controls_count &&
+ (controls[focus_control_index].flags & IS_ACTIVE) &&
+ (controls[focus_control_index].flags & type))
+ return &controls[focus_control_index];
+ else
+ return NULL;
+}
+
+static void change_enum_to_percent(struct control *control, int value)
+{
+ unsigned int i;
+ unsigned int index;
+ unsigned int new_index;
+ int items;
+ int err;
+
+ i = ffs(control->enum_channel_bits) - 1;
+ err = snd_mixer_selem_get_enum_item(control->elem, i, &index);
+ if (err < 0)
+ return;
+ new_index = index;
+ if (value == 0) {
+ new_index = 0;
+ } else if (value == 100) {
+ items = snd_mixer_selem_get_enum_items(control->elem);
+ if (items < 1)
+ return;
+ new_index = items - 1;
+ }
+ if (new_index == index)
+ return;
+ for (i = 0; i <= SND_MIXER_SCHN_LAST; ++i)
+ if (control->enum_channel_bits & (1 << i))
+ snd_mixer_selem_set_enum_item(control->elem, i, new_index);
+}
+
+static void change_enum_relative(struct control *control, int delta)
+{
+ int items;
+ unsigned int i;
+ unsigned int index;
+ int new_index;
+ int err;
+
+ items = snd_mixer_selem_get_enum_items(control->elem);
+ if (items < 1)
+ return;
+ err = snd_mixer_selem_get_enum_item(control->elem, 0, &index);
+ if (err < 0)
+ return;
+ new_index = (int)index + delta;
+ if (new_index < 0)
+ new_index = 0;
+ else if (new_index >= items)
+ new_index = items - 1;
+ if (new_index == index)
+ return;
+ for (i = 0; i <= SND_MIXER_SCHN_LAST; ++i)
+ if (control->enum_channel_bits & (1 << i))
+ snd_mixer_selem_set_enum_item(control->elem, i, new_index);
+}
+
+static void change_volume_to_percent(struct control *control, int value, unsigned int channels)
+{
+ int (*set_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, double, int);
+
+ if (!(control->flags & HAS_VOLUME_1))
+ channels = LEFT;
+ if (control->flags & TYPE_PVOLUME)
+ set_func = set_normalized_playback_volume;
+ else
+ set_func = set_normalized_capture_volume;
+ if (channels & LEFT)
+ set_func(control->elem, control->volume_channels[0], value / 100.0, 0);
+ if (channels & RIGHT)
+ set_func(control->elem, control->volume_channels[1], value / 100.0, 0);
+}
+
+static double clamp_volume(double v)
+{
+ if (v < 0)
+ return 0;
+ if (v > 1)
+ return 1;
+ return v;
+}
+
+static void change_volume_relative(struct control *control, int delta, unsigned int channels)
+{
+ double (*get_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t);
+ int (*set_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, double, int);
+ double left, right;
+ int dir;
+
+ if (!(control->flags & HAS_VOLUME_1))
+ channels = LEFT;
+ if (control->flags & TYPE_PVOLUME) {
+ get_func = get_normalized_playback_volume;
+ set_func = set_normalized_playback_volume;
+ } else {
+ get_func = get_normalized_capture_volume;
+ set_func = set_normalized_capture_volume;
+ }
+ if (channels & LEFT)
+ left = get_func(control->elem, control->volume_channels[0]);
+ if (channels & RIGHT)
+ right = get_func(control->elem, control->volume_channels[1]);
+ dir = delta > 0 ? 1 : -1;
+ if (channels & LEFT) {
+ left = clamp_volume(left + delta / 100.0);
+ set_func(control->elem, control->volume_channels[0], left, dir);
+ }
+ if (channels & RIGHT) {
+ right = clamp_volume(right + delta / 100.0);
+ set_func(control->elem, control->volume_channels[1], right, dir);
+ }
+}
+
+static void change_control_to_percent(int value, unsigned int channels)
+{
+ struct control *control;
+
+ control = get_focus_control(TYPE_PVOLUME | TYPE_CVOLUME | TYPE_ENUM);
+ if (!control)
+ return;
+ if (control->flags & TYPE_ENUM)
+ change_enum_to_percent(control, value);
+ else
+ change_volume_to_percent(control, value, channels);
+ display_controls();
+}
+
+static void change_control_relative(int delta, unsigned int channels)
+{
+ struct control *control;
+
+ control = get_focus_control(TYPE_PVOLUME | TYPE_CVOLUME | TYPE_ENUM);
+ if (!control)
+ return;
+ if (control->flags & TYPE_ENUM)
+ change_enum_relative(control, delta);
+ else
+ change_volume_relative(control, delta, channels);
+ display_controls();
+}
+
+static void toggle_switches(unsigned int type, unsigned int channels)
+{
+ struct control *control;
+ unsigned int switch_1_mask;
+ int (*get_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, int *);
+ int (*set_func)(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, int);
+ snd_mixer_selem_channel_id_t channel_ids[2];
+ int left, right;
+ int err;
+
+ control = get_focus_control(type);
+ if (!control)
+ return;
+ if (type == TYPE_PSWITCH) {
+ switch_1_mask = HAS_PSWITCH_1;
+ get_func = snd_mixer_selem_get_playback_switch;
+ set_func = snd_mixer_selem_set_playback_switch;
+ channel_ids[0] = control->pswitch_channels[0];
+ channel_ids[1] = control->pswitch_channels[1];
+ } else {
+ switch_1_mask = HAS_CSWITCH_1;
+ get_func = snd_mixer_selem_get_capture_switch;
+ set_func = snd_mixer_selem_set_capture_switch;
+ channel_ids[0] = control->cswitch_channels[0];
+ channel_ids[1] = control->cswitch_channels[1];
+ }
+ if (!(control->flags & switch_1_mask))
+ channels = LEFT;
+ if (channels & LEFT) {
+ err = get_func(control->elem, channel_ids[0], &left);
+ if (err < 0)
+ return;
+ }
+ if (channels & RIGHT) {
+ err = get_func(control->elem, channel_ids[1], &right);
+ if (err < 0)
+ return;
+ }
+ if (channels & LEFT)
+ set_func(control->elem, channel_ids[0], !left);
+ if (channels & RIGHT)
+ set_func(control->elem, channel_ids[1], !right);
+ display_controls();
+}
+
+static void toggle_mute(unsigned int channels)
+{
+ toggle_switches(TYPE_PSWITCH, channels);
+}
+
+static void toggle_capture(unsigned int channels)
+{
+ toggle_switches(TYPE_CSWITCH, channels);
+}
+
+static void balance_volumes(void)
+{
+ struct control *control;
+ double left, right;
+ int err;
+
+ control = get_focus_control(TYPE_PVOLUME | TYPE_CVOLUME);
+ if (!control || !(control->flags & HAS_VOLUME_1))
+ return;
+ if (control->flags & TYPE_PVOLUME) {
+ left = get_normalized_playback_volume(control->elem, control->volume_channels[0]);
+ right = get_normalized_playback_volume(control->elem, control->volume_channels[1]);
+ } else {
+ left = get_normalized_capture_volume(control->elem, control->volume_channels[0]);
+ right = get_normalized_capture_volume(control->elem, control->volume_channels[1]);
+ }
+ left = (left + right) / 2;
+ if (control->flags & TYPE_PVOLUME) {
+ set_normalized_playback_volume(control->elem, control->volume_channels[0], left, 0);
+ set_normalized_playback_volume(control->elem, control->volume_channels[1], left, 0);
+ } else {
+ set_normalized_capture_volume(control->elem, control->volume_channels[0], left, 0);
+ set_normalized_capture_volume(control->elem, control->volume_channels[1], left, 0);
+ }
+ display_controls();
+}
+
+static void on_handle_key(int key)
+{
+ switch (key) {
+ case 27:
+ case KEY_CANCEL:
+ case KEY_F(10):
+ mixer_widget.close();
+ break;
+ case KEY_F(1):
+ case KEY_HELP:
+ case 'H':
+ case 'h':
+ case '?':
+ show_help();
+ break;
+ case KEY_F(2):
+ case '/':
+ create_proc_files_list();
+ break;
+ case KEY_F(3):
+ set_view_mode(VIEW_MODE_PLAYBACK);
+ break;
+ case KEY_F(4):
+ set_view_mode(VIEW_MODE_CAPTURE);
+ break;
+ case KEY_F(5):
+ set_view_mode(VIEW_MODE_ALL);
+ break;
+ case '\t':
+ set_view_mode((enum view_mode)((view_mode + 1) % VIEW_MODE_COUNT));
+ break;
+ case KEY_F(6):
+ case 'S':
+ case 's':
+ create_card_select_list();
+ break;
+ case KEY_REFRESH:
+ case 12:
+ case 'L':
+ case 'l':
+ clearok(mixer_widget.window, TRUE);
+ display_controls();
+ break;
+ case KEY_LEFT:
+ case 'P':
+ case 'p':
+ if (focus_control_index > 0) {
+ --focus_control_index;
+ refocus_control();
+ }
+ break;
+ case KEY_RIGHT:
+ case 'N':
+ case 'n':
+ if (focus_control_index < controls_count - 1) {
+ ++focus_control_index;
+ refocus_control();
+ }
+ break;
+ case KEY_PPAGE:
+ change_control_relative(5, LEFT | RIGHT);
+ break;
+ case KEY_NPAGE:
+ change_control_relative(-5, LEFT | RIGHT);
+ break;
+#if 0
+ case KEY_BEG:
+ case KEY_HOME:
+ change_control_to_percent(100, LEFT | RIGHT);
+ break;
+#endif
+ case KEY_LL:
+ case KEY_END:
+ change_control_to_percent(0, LEFT | RIGHT);
+ break;
+ case KEY_UP:
+ case '+':
+ case 'K':
+ case 'k':
+ case 'W':
+ case 'w':
+ change_control_relative(1, LEFT | RIGHT);
+ break;
+ case KEY_DOWN:
+ case '-':
+ case 'J':
+ case 'j':
+ case 'X':
+ case 'x':
+ change_control_relative(-1, LEFT | RIGHT);
+ break;
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ change_control_to_percent((key - '0') * 10, LEFT | RIGHT);
+ break;
+ case 'Q':
+ case 'q':
+ change_control_relative(1, LEFT);
+ break;
+ case 'Y':
+ case 'y':
+ case 'Z':
+ case 'z':
+ change_control_relative(-1, LEFT);
+ break;
+ case 'E':
+ case 'e':
+ change_control_relative(1, RIGHT);
+ break;
+ case 'C':
+ case 'c':
+ change_control_relative(-1, RIGHT);
+ break;
+ case 'M':
+ case 'm':
+ toggle_mute(LEFT | RIGHT);
+ break;
+ case 'B':
+ case 'b':
+ case '=':
+ balance_volumes();
+ break;
+ case '<':
+ case ',':
+ toggle_mute(LEFT);
+ break;
+ case '>':
+ case '.':
+ toggle_mute(RIGHT);
+ break;
+ case ' ':
+ toggle_capture(LEFT | RIGHT);
+ break;
+ case KEY_IC:
+ case ';':
+ toggle_capture(LEFT);
+ break;
+ case KEY_DC:
+ case '\'':
+ toggle_capture(RIGHT);
+ break;
+ }
+}
+
+static void create(void)
+{
+ static const char title[] = " AlsaMixer v" SND_UTIL_VERSION_STR " ";
+
+ widget_init(&mixer_widget, screen_lines, screen_cols, 0, 0,
+ attr_mixer_frame, WIDGET_BORDER);
+ if (screen_cols >= (sizeof(title) - 1) + 2) {
+ wattrset(mixer_widget.window, attr_mixer_active);
+ mvwaddstr(mixer_widget.window, 0, (screen_cols - (sizeof(title) - 1)) / 2, title);
+ }
+ init_mixer_layout();
+ display_card_info();
+ set_view_mode(view_mode);
+}
+
+static void on_window_size_changed(void)
+{
+ create();
+}
+
+static void on_close(void)
+{
+ widget_free(&mixer_widget);
+}
+
+void mixer_shutdown(void)
+{
+ free_controls();
+ if (mixer)
+ snd_mixer_close(mixer);
+ if (current_selem_id)
+ snd_mixer_selem_id_free(current_selem_id);
+}
+
+struct widget mixer_widget = {
+ .handle_key = on_handle_key,
+ .window_size_changed = on_window_size_changed,
+ .close = on_close,
+};
+
+void create_mixer_widget(void)
+{
+ create();
+}
diff --git a/alsamixer/mixer_widget.h b/alsamixer/mixer_widget.h
new file mode 100644
index 0000000..086611c
--- /dev/null
+++ b/alsamixer/mixer_widget.h
@@ -0,0 +1,37 @@
+#ifndef MIXER_WIDGET_H_INCLUDED
+#define MIXER_WIDGET_H_INCLUDED
+
+#include CURSESINC
+#include <alsa/asoundlib.h>
+#include "widget.h"
+
+enum view_mode {
+ VIEW_MODE_PLAYBACK,
+ VIEW_MODE_CAPTURE,
+ VIEW_MODE_ALL,
+ VIEW_MODE_COUNT,
+};
+
+extern snd_mixer_t *mixer;
+extern char *mixer_device_name;
+extern bool unplugged;
+
+extern struct widget mixer_widget;
+
+extern enum view_mode view_mode;
+
+extern int focus_control_index;
+extern snd_mixer_selem_id_t *current_selem_id;
+extern unsigned int current_control_flags;
+
+extern bool control_values_changed;
+extern bool controls_changed;
+
+void create_mixer_object(struct snd_mixer_selem_regopt *selem_regopt);
+void create_mixer_widget(void);
+void mixer_shutdown(void);
+void close_mixer_device(void);
+bool select_card_by_name(const char *device_name);
+void refocus_control(void);
+
+#endif
diff --git a/alsamixer/proc_files.c b/alsamixer/proc_files.c
new file mode 100644
index 0000000..b2f5f21
--- /dev/null
+++ b/alsamixer/proc_files.c
@@ -0,0 +1,169 @@
+/*
+ * proc_files.c - shows ALSA system information files
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <assert.h>
+#include <menu.h>
+#include <unistd.h>
+#include "gettext_curses.h"
+#include "utils.h"
+#include "die.h"
+#include "mem.h"
+#include "colors.h"
+#include "widget.h"
+#include "textbox.h"
+#include "proc_files.h"
+
+static struct widget proc_widget;
+static ITEM *items[7];
+static unsigned int items_count;
+static MENU *menu;
+
+static void on_menu_key(int key)
+{
+ static const struct {
+ int key;
+ int request;
+ } key_map[] = {
+ { KEY_DOWN, REQ_DOWN_ITEM },
+ { KEY_UP, REQ_UP_ITEM },
+ { KEY_HOME, REQ_FIRST_ITEM },
+ { KEY_NPAGE, REQ_SCR_DPAGE },
+ { KEY_PPAGE, REQ_SCR_UPAGE },
+ { KEY_BEG, REQ_FIRST_ITEM },
+ { KEY_END, REQ_LAST_ITEM },
+ };
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(key_map); ++i)
+ if (key_map[i].key == key) {
+ menu_driver(menu, key_map[i].request);
+ break;
+ }
+}
+
+static void on_handle_key(int key)
+{
+ ITEM *item;
+
+ switch (key) {
+ case 27:
+ case KEY_CANCEL:
+ proc_widget.close();
+ break;
+ case 10:
+ case 13:
+ case KEY_ENTER:
+ item = current_item(menu);
+ if (item)
+ show_textfile(item_name(item));
+ break;
+ default:
+ on_menu_key(key);
+ break;
+ }
+}
+
+static bool create(void)
+{
+ int rows, columns;
+ const char *title;
+
+ if (screen_lines < 3 || screen_cols < 20) {
+ proc_widget.close();
+ beep();
+ return FALSE;
+ }
+ scale_menu(menu, &rows, &columns);
+ rows += 2;
+ columns += 2;
+ if (rows > screen_lines)
+ rows = screen_lines;
+ if (columns > screen_cols)
+ columns = screen_cols;
+
+ widget_init(&proc_widget, rows, columns, SCREEN_CENTER, SCREEN_CENTER,
+ attr_menu, WIDGET_BORDER | WIDGET_SUBWINDOW);
+
+ title = _("Select File");
+ mvwprintw(proc_widget.window, 0, (columns - 2 - get_mbs_width(title)) / 2, " %s ", title);
+ set_menu_win(menu, proc_widget.window);
+ set_menu_sub(menu, proc_widget.subwindow);
+ return TRUE;
+}
+
+static void on_window_size_changed(void)
+{
+ unpost_menu(menu);
+ if (!create())
+ return;
+ post_menu(menu);
+}
+
+static void on_close(void)
+{
+ unsigned int i;
+
+ unpost_menu(menu);
+ free_menu(menu);
+ for (i = 0; i < items_count; ++i)
+ free_item(items[i]);
+ widget_free(&proc_widget);
+}
+
+static void add_item(const char *file_name)
+{
+ if (access(file_name, F_OK) == 0) {
+ items[items_count] = new_item(file_name, NULL);
+ if (!items[items_count])
+ fatal_error("cannot create menu item");
+ ++items_count;
+ assert(items_count < ARRAY_SIZE(items));
+ }
+}
+
+static struct widget proc_widget = {
+ .handle_key = on_handle_key,
+ .window_size_changed = on_window_size_changed,
+ .close = on_close,
+};
+
+void create_proc_files_list(void)
+{
+ items_count = 0;
+ add_item("/proc/asound/version");
+ add_item("/proc/asound/cards");
+ add_item("/proc/asound/devices");
+ add_item("/proc/asound/oss/devices");
+ add_item("/proc/asound/timers");
+ add_item("/proc/asound/pcm");
+ items[items_count] = NULL;
+
+ menu = new_menu(items);
+ if (!menu)
+ fatal_error("cannot create menu");
+ set_menu_fore(menu, attr_menu_selected);
+ set_menu_back(menu, attr_menu);
+ set_menu_mark(menu, NULL);
+ menu_opts_off(menu, O_SHOWDESC);
+
+ if (!create())
+ return;
+
+ post_menu(menu);
+}
diff --git a/alsamixer/proc_files.h b/alsamixer/proc_files.h
new file mode 100644
index 0000000..8862c71
--- /dev/null
+++ b/alsamixer/proc_files.h
@@ -0,0 +1,6 @@
+#ifndef PROC_FILES_H_INCLUDED
+#define PROC_FILES_H_INCLUDED
+
+void create_proc_files_list(void);
+
+#endif
diff --git a/alsamixer/textbox.c b/alsamixer/textbox.c
new file mode 100644
index 0000000..a979d3c
--- /dev/null
+++ b/alsamixer/textbox.c
@@ -0,0 +1,397 @@
+/*
+ * textbox.c - show a text box for messages, files or help
+ * Copyright (c) 1998,1999 Tim Janik
+ * Jaroslav Kysela <perex@perex.cz>
+ * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include CURSESINC
+#include <alsa/asoundlib.h>
+#include "gettext_curses.h"
+#include "utils.h"
+#include "die.h"
+#include "mem.h"
+#include "colors.h"
+#include "widget.h"
+#include "textbox.h"
+
+#define MAX_FILE_SIZE 1048576
+
+static void create_text_box(const char *const *lines, unsigned int count,
+ const char *title, int attrs);
+
+void show_error(const char *msg, int err)
+{
+ const char *lines[2];
+ unsigned int count;
+
+ lines[0] = msg;
+ count = 1;
+ if (err) {
+ lines[1] = strerror(err);
+ count = 2;
+ }
+ create_text_box(lines, count, _("Error"), attr_errormsg);
+}
+
+void show_alsa_error(const char *msg, int err)
+{
+ const char *lines[2];
+ unsigned int count;
+
+ lines[0] = msg;
+ count = 1;
+ if (err < 0) {
+ lines[1] = snd_strerror(err);
+ count = 2;
+ }
+ create_text_box(lines, count, _("Error"), attr_errormsg);
+}
+
+static char *read_file(const char *file_name, unsigned int *file_size)
+{
+ FILE *f;
+ int err;
+ char *buf;
+ unsigned int allocated = 2048;
+ unsigned int bytes_read;
+
+ f = fopen(file_name, "r");
+ if (!f) {
+ err = errno;
+ buf = casprintf(_("Cannot open file \"%s\"."), file_name);
+ show_error(buf, err);
+ free(buf);
+ return NULL;
+ }
+ *file_size = 0;
+ buf = NULL;
+ do {
+ allocated *= 2;
+ buf = crealloc(buf, allocated);
+ bytes_read = fread(buf + *file_size, 1, allocated - *file_size, f);
+ *file_size += bytes_read;
+ } while (*file_size == allocated && allocated < MAX_FILE_SIZE);
+ fclose(f);
+ if (*file_size > 0 && buf[*file_size - 1] != '\n' && *file_size < allocated) {
+ buf[*file_size] = '\n';
+ ++*file_size;
+ }
+ return buf;
+}
+
+void show_textfile(const char *file_name)
+{
+ char *buf;
+ unsigned int file_size;
+ unsigned int line_count;
+ unsigned int i;
+ const char **lines;
+ const char *start_line;
+
+ buf = read_file(file_name, &file_size);
+ if (!buf)
+ return;
+ line_count = 0;
+ for (i = 0; i < file_size; ++i)
+ line_count += buf[i] == '\n';
+ lines = ccalloc(line_count, sizeof *lines);
+ line_count = 0;
+ start_line = buf;
+ for (i = 0; i < file_size; ++i) {
+ if (buf[i] == '\n') {
+ lines[line_count++] = start_line;
+ buf[i] = '\0';
+ start_line = &buf[i + 1];
+ }
+ if (buf[i] == '\t')
+ buf[i] = ' ';
+ }
+ create_text_box(lines, line_count, file_name, attr_textbox);
+ free(lines);
+ free(buf);
+}
+
+void show_text(const char *const *lines, unsigned int count, const char *title)
+{
+ create_text_box(lines, count, title, attr_textbox);
+}
+
+/**********************************************************************/
+
+static struct widget text_widget;
+static char *title;
+static int widget_attrs;
+static char **text_lines;
+static unsigned int text_lines_count;
+static int max_line_width;
+static int text_box_y;
+static int text_box_x;
+static int max_scroll_y;
+static int max_scroll_x;
+static int current_top;
+static int current_left;
+
+static void update_text_lines(void)
+{
+ int i;
+ int width;
+ const char *line_begin;
+ const char *line_end;
+ int cur_y, cur_x;
+ int rest_of_line;
+
+ for (i = 0; i < text_box_y; ++i) {
+ width = current_left;
+ line_begin = mbs_at_width(text_lines[current_top + i], &width, 1);
+ wmove(text_widget.window, i + 1, 1);
+ if (width > current_left)
+ waddch(text_widget.window, ' ');
+ if (*line_begin != '\0') {
+ width = text_box_x - (width > current_left);
+ line_end = mbs_at_width(line_begin, &width, -1);
+ if (width)
+ waddnstr(text_widget.window, line_begin,
+ line_end - line_begin);
+ }
+ getyx(text_widget.window, cur_y, cur_x);
+ if (cur_y == i + 1) {
+ rest_of_line = text_box_x + 1 - cur_x;
+ if (rest_of_line > 0)
+ wprintw(text_widget.window, "%*s", rest_of_line, "");
+ }
+ }
+}
+
+static void update_y_scroll_bar(void)
+{
+ int length;
+ int begin, end;
+ int i;
+
+ if (max_scroll_y <= 0 || text_lines_count == 0)
+ return;
+ length = text_box_y * text_box_y / text_lines_count;
+ if (length >= text_box_y)
+ return;
+ begin = current_top * (text_box_y - length) / max_scroll_y;
+ end = begin + length;
+ for (i = 0; i < text_box_y; ++i)
+ mvwaddch(text_widget.window, i + 1, text_box_x + 1,
+ i >= begin && i < end ? ACS_BOARD : ' ');
+}
+
+static void update_x_scroll_bar(void)
+{
+ int length;
+ int begin, end;
+ int i;
+
+ if (max_scroll_x <= 0 || max_line_width <= 0)
+ return;
+ length = text_box_x * text_box_x / max_line_width;
+ if (length >= text_box_x)
+ return;
+ begin = current_left * (text_box_x - length) / max_scroll_x;
+ end = begin + length;
+ wmove(text_widget.window, text_box_y + 1, 1);
+ for (i = 0; i < text_box_x; ++i)
+ waddch(text_widget.window, i >= begin && i < end ? ACS_BOARD : ' ');
+}
+
+static void move_x(int delta)
+{
+ int left;
+
+ left = current_left + delta;
+ if (left < 0)
+ left = 0;
+ else if (left > max_scroll_x)
+ left = max_scroll_x;
+ if (left != current_left) {
+ current_left = left;
+ update_text_lines();
+ update_x_scroll_bar();
+ }
+}
+
+static void move_y(int delta)
+{
+ int top;
+
+ top = current_top + delta;
+ if (top < 0)
+ top = 0;
+ else if (top > max_scroll_y)
+ top = max_scroll_y;
+ if (top != current_top) {
+ current_top = top;
+ update_text_lines();
+ update_y_scroll_bar();
+ }
+}
+
+static void on_handle_key(int key)
+{
+ switch (key) {
+ case 10:
+ case 13:
+ case 27:
+ case KEY_CANCEL:
+ case KEY_ENTER:
+ case KEY_CLOSE:
+ case KEY_EXIT:
+ text_widget.close();
+ break;
+ case KEY_DOWN:
+ case KEY_SF:
+ case 'J':
+ case 'j':
+ case 'X':
+ case 'x':
+ move_y(1);
+ break;
+ case KEY_UP:
+ case KEY_SR:
+ case 'K':
+ case 'k':
+ case 'W':
+ case 'w':
+ move_y(-1);
+ break;
+ case KEY_LEFT:
+ case 'H':
+ case 'h':
+ case 'P':
+ case 'p':
+ move_x(-1);
+ break;
+ case KEY_RIGHT:
+ case 'L':
+ case 'l':
+ case 'N':
+ case 'n':
+ move_x(1);
+ break;
+ case KEY_NPAGE:
+ case ' ':
+ move_y(text_box_y);
+ break;
+ case KEY_PPAGE:
+ case KEY_BACKSPACE:
+ case 'B':
+ case 'b':
+ move_y(-text_box_y);
+ break;
+ case KEY_HOME:
+ case KEY_BEG:
+ move_x(-max_scroll_x);
+ break;
+ case KEY_LL:
+ case KEY_END:
+ move_x(max_scroll_x);
+ break;
+ case '\t':
+ move_x(8);
+ break;
+ case KEY_BTAB:
+ move_x(-8);
+ break;
+ }
+}
+
+static bool create(void)
+{
+ int len, width;
+
+ if (screen_lines < 3 || screen_cols < 8) {
+ text_widget.close();
+ beep();
+ return FALSE;
+ }
+
+ width = max_line_width;
+ len = get_mbs_width(title) + 2;
+ if (width < len)
+ width = len;
+
+ text_box_y = text_lines_count;
+ if (text_box_y > screen_lines - 2)
+ text_box_y = screen_lines - 2;
+ max_scroll_y = text_lines_count - text_box_y;
+ text_box_x = width;
+ if (text_box_x > screen_cols - 2)
+ text_box_x = screen_cols - 2;
+ max_scroll_x = max_line_width - text_box_x;
+
+ widget_init(&text_widget, text_box_y + 2, text_box_x + 2,
+ SCREEN_CENTER, SCREEN_CENTER, widget_attrs, WIDGET_BORDER);
+ mvwprintw(text_widget.window, 0, (text_box_x + 2 - get_mbs_width(title) - 2) / 2, " %s ", title);
+
+ if (current_top > max_scroll_y)
+ current_top = max_scroll_y;
+ if (current_left > max_scroll_x)
+ current_left = max_scroll_x;
+ update_text_lines();
+ update_y_scroll_bar();
+ update_x_scroll_bar();
+ return TRUE;
+}
+
+static void on_window_size_changed(void)
+{
+ create();
+}
+
+static void on_close(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < text_lines_count; ++i)
+ free(text_lines[i]);
+ free(text_lines);
+ widget_free(&text_widget);
+}
+
+static struct widget text_widget = {
+ .handle_key = on_handle_key,
+ .window_size_changed = on_window_size_changed,
+ .close = on_close,
+};
+
+static void create_text_box(const char *const *lines, unsigned int count,
+ const char *title_, int attrs)
+{
+ unsigned int i;
+
+ text_lines = ccalloc(count, sizeof *text_lines);
+ for (i = 0; i < count; ++i)
+ text_lines[i] = cstrdup(lines[i]);
+ text_lines_count = count;
+ max_line_width = get_max_mbs_width(lines, count);
+ title = cstrdup(title_);
+ widget_attrs = attrs;
+
+ current_top = 0;
+ current_left = 0;
+
+ create();
+}
diff --git a/alsamixer/textbox.h b/alsamixer/textbox.h
new file mode 100644
index 0000000..7dc290b
--- /dev/null
+++ b/alsamixer/textbox.h
@@ -0,0 +1,10 @@
+#ifndef TEXTBOX_H_INCLUDED
+#define TEXTBOX_H_INCLUDED
+
+void show_error(const char *msg, int err);
+void show_alsa_error(const char *msg, int err);
+void show_text(const char *const *text_lines, unsigned int count,
+ const char *title);
+void show_textfile(const char *file_name);
+
+#endif
diff --git a/alsamixer/utils.c b/alsamixer/utils.c
new file mode 100644
index 0000000..3602bef
--- /dev/null
+++ b/alsamixer/utils.c
@@ -0,0 +1,111 @@
+/*
+ * utils.c - multibyte-string helpers
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define _XOPEN_SOURCE
+#include "aconfig.h"
+#include <limits.h>
+#include <stdlib.h>
+#include <string.h>
+#include <wchar.h>
+#include "utils.h"
+
+/*
+ * mbs_at_width - compute screen position in a string
+ *
+ * For displaying strings on the screen, we have to know how many character
+ * cells are occupied. This function calculates the position in a multibyte
+ * string that is at a desired position.
+ *
+ * Parameters:
+ * s: the string
+ * width: on input, the desired number of character cells; on output, the actual
+ * position, in character cells, of the return value
+ * dir: -1 or 1; in which direction to round if a multi-column character goes
+ * over the desired width
+ *
+ * Return value:
+ * Pointer to the place in the string that is as near the desired width as
+ * possible. If the string is too short, the return value points to the
+ * terminating zero. If the last character is a multi-column character that
+ * goes over the desired width, the return value may be one character cell
+ * earlier or later than desired, depending on the dir parameter.
+ * In any case, the return value points after any zero-width characters that
+ * follow the last character.
+ */
+const char *mbs_at_width(const char *s, int *width, int dir)
+{
+ size_t len;
+ wchar_t wc;
+ int bytes;
+ int width_so_far, w;
+
+ if (*width <= 0)
+ return s;
+ mbtowc(NULL, NULL, 0); /* reset shift state */
+ len = strlen(s);
+ width_so_far = 0;
+ while (len && (bytes = mbtowc(&wc, s, len)) > 0) {
+ w = wcwidth(wc);
+ if (width_so_far + w > *width && dir < 0)
+ break;
+ if (w >= 0)
+ width_so_far += w;
+ s += bytes;
+ len -= bytes;
+ if (width_so_far >= *width) {
+ while (len && (bytes = mbtowc(&wc, s, len)) > 0) {
+ w = wcwidth(wc);
+ if (w != 0)
+ break;
+ s += bytes;
+ len -= bytes;
+ }
+ break;
+ }
+ }
+ *width = width_so_far;
+ return s;
+}
+
+/*
+ * get_mbs_width - compute screen width of a string
+ */
+unsigned int get_mbs_width(const char *s)
+{
+ int width;
+
+ width = INT_MAX;
+ mbs_at_width(s, &width, 1);
+ return width;
+}
+
+/*
+ * get_max_mbs_width - get width of longest string in an array
+ */
+unsigned int get_max_mbs_width(const char *const *s, unsigned int count)
+{
+ unsigned int max_width, i, len;
+
+ max_width = 0;
+ for (i = 0; i < count; ++i) {
+ len = get_mbs_width(s[i]);
+ if (len > max_width)
+ max_width = len;
+ }
+ return max_width;
+}
diff --git a/alsamixer/utils.h b/alsamixer/utils.h
new file mode 100644
index 0000000..00a52dd
--- /dev/null
+++ b/alsamixer/utils.h
@@ -0,0 +1,10 @@
+#ifndef UTILS_H_INCLUDED
+#define UTILS_H_INCLUDED
+
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof *(a))
+
+unsigned int get_mbs_width(const char *s);
+unsigned int get_max_mbs_width(const char *const *s, unsigned int count);
+const char *mbs_at_width(const char *s, int *width, int dir);
+
+#endif
diff --git a/alsamixer/volume_mapping.c b/alsamixer/volume_mapping.c
new file mode 100644
index 0000000..1c0d7c4
--- /dev/null
+++ b/alsamixer/volume_mapping.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2010 Clemens Ladisch <clemens@ladisch.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * The functions in this file map the value ranges of ALSA mixer controls onto
+ * the interval 0..1.
+ *
+ * The mapping is designed so that the position in the interval is proportional
+ * to the volume as a human ear would perceive it (i.e., the position is the
+ * cubic root of the linear sample multiplication factor). For controls with
+ * a small range (24 dB or less), the mapping is linear in the dB values so
+ * that each step has the same size visually. Only for controls without dB
+ * information, a linear mapping of the hardware volume register values is used
+ * (this is the same algorithm as used in the old alsamixer).
+ *
+ * When setting the volume, 'dir' is the rounding direction:
+ * -1/0/1 = down/nearest/up.
+ */
+
+#define _ISOC99_SOURCE /* lrint() */
+#define _GNU_SOURCE /* exp10() */
+#include "aconfig.h"
+#include <math.h>
+#include <stdbool.h>
+#include "volume_mapping.h"
+
+#ifdef __UCLIBC__
+/* 10^x = 10^(log e^x) = (e^x)^log10 = e^(x * log 10) */
+#define exp10(x) (exp((x) * log(10)))
+#endif /* __UCLIBC__ */
+
+#define MAX_LINEAR_DB_SCALE 24
+
+static inline bool use_linear_dB_scale(long dBmin, long dBmax)
+{
+ return dBmax - dBmin <= MAX_LINEAR_DB_SCALE * 100;
+}
+
+static long lrint_dir(double x, int dir)
+{
+ if (dir > 0)
+ return lrint(ceil(x));
+ else if (dir < 0)
+ return lrint(floor(x));
+ else
+ return lrint(x);
+}
+
+enum ctl_dir { PLAYBACK, CAPTURE };
+
+static int (* const get_dB_range[2])(snd_mixer_elem_t *, long *, long *) = {
+ snd_mixer_selem_get_playback_dB_range,
+ snd_mixer_selem_get_capture_dB_range,
+};
+static int (* const get_raw_range[2])(snd_mixer_elem_t *, long *, long *) = {
+ snd_mixer_selem_get_playback_volume_range,
+ snd_mixer_selem_get_capture_volume_range,
+};
+static int (* const get_dB[2])(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, long *) = {
+ snd_mixer_selem_get_playback_dB,
+ snd_mixer_selem_get_capture_dB,
+};
+static int (* const get_raw[2])(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, long *) = {
+ snd_mixer_selem_get_playback_volume,
+ snd_mixer_selem_get_capture_volume,
+};
+static int (* const set_dB[2])(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, long, int) = {
+ snd_mixer_selem_set_playback_dB,
+ snd_mixer_selem_set_capture_dB,
+};
+static int (* const set_raw[2])(snd_mixer_elem_t *, snd_mixer_selem_channel_id_t, long) = {
+ snd_mixer_selem_set_playback_volume,
+ snd_mixer_selem_set_capture_volume,
+};
+
+static double get_normalized_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel,
+ enum ctl_dir ctl_dir)
+{
+ long min, max, value;
+ double normalized, min_norm;
+ int err;
+
+ err = get_dB_range[ctl_dir](elem, &min, &max);
+ if (err < 0 || min >= max) {
+ err = get_raw_range[ctl_dir](elem, &min, &max);
+ if (err < 0 || min == max)
+ return 0;
+
+ err = get_raw[ctl_dir](elem, channel, &value);
+ if (err < 0)
+ return 0;
+
+ return (value - min) / (double)(max - min);
+ }
+
+ err = get_dB[ctl_dir](elem, channel, &value);
+ if (err < 0)
+ return 0;
+
+ if (use_linear_dB_scale(min, max))
+ return (value - min) / (double)(max - min);
+
+ normalized = exp10((value - max) / 6000.0);
+ if (min != SND_CTL_TLV_DB_GAIN_MUTE) {
+ min_norm = exp10((min - max) / 6000.0);
+ normalized = (normalized - min_norm) / (1 - min_norm);
+ }
+
+ return normalized;
+}
+
+static int set_normalized_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel,
+ double volume,
+ int dir,
+ enum ctl_dir ctl_dir)
+{
+ long min, max, value;
+ double min_norm;
+ int err;
+
+ err = get_dB_range[ctl_dir](elem, &min, &max);
+ if (err < 0 || min >= max) {
+ err = get_raw_range[ctl_dir](elem, &min, &max);
+ if (err < 0)
+ return err;
+
+ value = lrint_dir(volume * (max - min), dir) + min;
+ return set_raw[ctl_dir](elem, channel, value);
+ }
+
+ if (use_linear_dB_scale(min, max)) {
+ value = lrint_dir(volume * (max - min), dir) + min;
+ return set_dB[ctl_dir](elem, channel, value, dir);
+ }
+
+ if (min != SND_CTL_TLV_DB_GAIN_MUTE) {
+ min_norm = exp10((min - max) / 6000.0);
+ volume = volume * (1 - min_norm) + min_norm;
+ }
+ value = lrint_dir(6000.0 * log10(volume), dir) + max;
+ return set_dB[ctl_dir](elem, channel, value, dir);
+}
+
+double get_normalized_playback_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel)
+{
+ return get_normalized_volume(elem, channel, PLAYBACK);
+}
+
+double get_normalized_capture_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel)
+{
+ return get_normalized_volume(elem, channel, CAPTURE);
+}
+
+int set_normalized_playback_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel,
+ double volume,
+ int dir)
+{
+ return set_normalized_volume(elem, channel, volume, dir, PLAYBACK);
+}
+
+int set_normalized_capture_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel,
+ double volume,
+ int dir)
+{
+ return set_normalized_volume(elem, channel, volume, dir, CAPTURE);
+}
diff --git a/alsamixer/volume_mapping.h b/alsamixer/volume_mapping.h
new file mode 100644
index 0000000..d4251d6
--- /dev/null
+++ b/alsamixer/volume_mapping.h
@@ -0,0 +1,19 @@
+#ifndef VOLUME_MAPPING_H_INCLUDED
+#define VOLUME_MAPPING_H_INCLUDED
+
+#include <alsa/asoundlib.h>
+
+double get_normalized_playback_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel);
+double get_normalized_capture_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel);
+int set_normalized_playback_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel,
+ double volume,
+ int dir);
+int set_normalized_capture_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t channel,
+ double volume,
+ int dir);
+
+#endif
diff --git a/alsamixer/widget.c b/alsamixer/widget.c
new file mode 100644
index 0000000..75da4c2
--- /dev/null
+++ b/alsamixer/widget.c
@@ -0,0 +1,140 @@
+/*
+ * widget.c - handles widget objects and the widget stack
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "aconfig.h"
+#include <stdlib.h>
+#include <term.h>
+#include "die.h"
+#include "widget.h"
+
+int screen_lines;
+int screen_cols;
+
+static int cursor_visibility = -1;
+
+static void widget_handle_key(int key)
+{
+}
+
+static void update_cursor_visibility(void)
+{
+ struct widget *active_widget;
+
+ active_widget = get_active_widget();
+ if (active_widget &&
+ active_widget->cursor_visibility != cursor_visibility) {
+ cursor_visibility = active_widget->cursor_visibility;
+ curs_set(cursor_visibility);
+ }
+}
+
+void widget_init(struct widget *widget, int lines_, int cols, int y, int x,
+ chtype bkgd, unsigned int flags)
+{
+ WINDOW *old_window;
+
+ if (y == SCREEN_CENTER)
+ y = (screen_lines - lines_) / 2;
+ if (x == SCREEN_CENTER)
+ x = (screen_cols - cols) / 2;
+
+ old_window = widget->window;
+ widget->window = newwin(lines_, cols, y, x);
+ if (!widget->window)
+ fatal_error("cannot create window");
+ keypad(widget->window, TRUE);
+ nodelay(widget->window, TRUE);
+ leaveok(widget->window, !(flags & WIDGET_CURSOR_VISIBLE));
+ wbkgdset(widget->window, bkgd);
+ werase(widget->window);
+
+ if (flags & WIDGET_BORDER)
+ box(widget->window, 0, 0);
+ if (flags & WIDGET_SUBWINDOW) {
+ if (widget->subwindow)
+ delwin(widget->subwindow);
+ widget->subwindow = derwin(widget->window,
+ lines_ - 2, cols - 2, 1, 1);
+ if (!widget->subwindow)
+ fatal_error("cannot create subwindow");
+ wbkgdset(widget->subwindow, bkgd);
+ }
+ widget->cursor_visibility = !!(flags & WIDGET_CURSOR_VISIBLE);
+
+ if (widget->panel) {
+ replace_panel(widget->panel, widget->window);
+ } else {
+ widget->panel = new_panel(widget->window);
+ if (!widget->panel)
+ fatal_error("cannot create panel");
+ set_panel_userptr(widget->panel, widget);
+ }
+
+ if (!widget->handle_key)
+ widget->handle_key = widget_handle_key;
+
+ if (old_window)
+ delwin(old_window);
+
+ update_cursor_visibility();
+}
+
+void widget_free(struct widget *widget)
+{
+ if (widget->panel) {
+ del_panel(widget->panel);
+ widget->panel = NULL;
+ }
+ if (widget->subwindow) {
+ delwin(widget->subwindow);
+ widget->subwindow = NULL;
+ }
+ if (widget->window) {
+ delwin(widget->window);
+ widget->window = NULL;
+ }
+
+ update_cursor_visibility();
+}
+
+struct widget *get_active_widget(void)
+{
+ PANEL *active_panel;
+
+ active_panel = panel_below(NULL);
+ if (active_panel)
+ return panel_userptr(active_panel);
+ else
+ return NULL;
+}
+
+void window_size_changed(void)
+{
+ PANEL *panel, *below;
+ struct widget *widget;
+
+ getmaxyx(stdscr, screen_lines, screen_cols);
+ if (tigetflag("xenl") != 1 && tigetflag("am") != 1)
+ --screen_lines;
+
+ for (panel = panel_below(NULL); panel; panel = below) {
+ below = panel_below(panel);
+ widget = panel_userptr(panel);
+ widget->window_size_changed();
+ }
+}
diff --git a/alsamixer/widget.h b/alsamixer/widget.h
new file mode 100644
index 0000000..6adb526
--- /dev/null
+++ b/alsamixer/widget.h
@@ -0,0 +1,33 @@
+#ifndef WIDGET_H_INCLUDED
+#define WIDGET_H_INCLUDED
+
+#include <panel.h>
+
+#define WIDGET_BORDER 0x1
+#define WIDGET_SUBWINDOW 0x2
+#define WIDGET_CURSOR_VISIBLE 0x4
+
+#define SCREEN_CENTER -1
+
+struct widget {
+ WINDOW *window;
+ WINDOW *subwindow; /* optional: contents without border */
+ PANEL *panel;
+ int cursor_visibility;
+
+ void (*handle_key)(int key);
+ void (*window_size_changed)(void);
+ void (*close)(void);
+};
+
+extern int screen_lines;
+extern int screen_cols;
+
+void widget_init(struct widget *widget,
+ int lines_, int cols, int y, int x,
+ chtype bkgd, unsigned int flags);
+void widget_free(struct widget *widget);
+struct widget *get_active_widget(void);
+void window_size_changed(void);
+
+#endif
diff --git a/alsaucm/Android.mk b/alsaucm/Android.mk
new file mode 100644
index 0000000..5ff1220
--- /dev/null
+++ b/alsaucm/Android.mk
@@ -0,0 +1,12 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := alsaucm
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := usecase.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/alsaucm/Makefile.am b/alsaucm/Makefile.am
new file mode 100644
index 0000000..4eba677
--- /dev/null
+++ b/alsaucm/Makefile.am
@@ -0,0 +1,13 @@
+bin_PROGRAMS = \
+ alsaucm
+
+alsaucm_SOURCES = usecase.c
+
+INCLUDES = \
+ -Wall -I$(top_srcdir)/include
+
+alsaucm_LDADD = -lasound
+
+# local build
+INCLUDES += -I$(top_srcdir)/../alsa-lib/include
+alsaucm_LDADD += -L$(top_srcdir)/../alsa-lib/src/.libs
diff --git a/alsaucm/Makefile.in b/alsaucm/Makefile.in
new file mode 100644
index 0000000..c4e512d
--- /dev/null
+++ b/alsaucm/Makefile.in
@@ -0,0 +1,559 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = alsaucm$(EXEEXT)
+subdir = alsaucm
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_alsaucm_OBJECTS = usecase.$(OBJEXT)
+alsaucm_OBJECTS = $(am_alsaucm_OBJECTS)
+alsaucm_DEPENDENCIES =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(alsaucm_SOURCES)
+DIST_SOURCES = $(alsaucm_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+alsaucm_SOURCES = usecase.c
+
+# local build
+INCLUDES = -Wall -I$(top_srcdir)/include \
+ -I$(top_srcdir)/../alsa-lib/include
+alsaucm_LDADD = -lasound -L$(top_srcdir)/../alsa-lib/src/.libs
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaucm/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign alsaucm/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+alsaucm$(EXEEXT): $(alsaucm_OBJECTS) $(alsaucm_DEPENDENCIES) $(EXTRA_alsaucm_DEPENDENCIES)
+ @rm -f alsaucm$(EXEEXT)
+ $(LINK) $(alsaucm_OBJECTS) $(alsaucm_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usecase.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-binPROGRAMS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/alsaucm/NOTICE b/alsaucm/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/alsaucm/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/alsaucm/usecase.c b/alsaucm/usecase.c
new file mode 100644
index 0000000..1c94680
--- /dev/null
+++ b/alsaucm/usecase.c
@@ -0,0 +1,505 @@
+/*
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Support for the verb/device/modifier core logic and API,
+ * command line tool and file parser was kindly sponsored by
+ * Texas Instruments Inc.
+ * Support for multiple active modifiers and devices,
+ * transition sequences, multiple client access and user defined use
+ * cases was kindly sponsored by Wolfson Microelectronics PLC.
+ *
+ * Copyright (C) 2008-2010 SlimLogic Ltd
+ * Copyright (C) 2010 Wolfson Microelectronics PLC
+ * Copyright (C) 2010 Texas Instruments Inc.
+ * Copyright (C) 2010 Red Hat Inc.
+ * Authors: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Stefan Schmidt <stefan@slimlogic.co.uk>
+ * Justin Xu <justinx@slimlogic.co.uk>
+ * Jaroslav Kysela <perex@perex.cz>
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <getopt.h>
+#include <alsa/asoundlib.h>
+#include <alsa/use-case.h>
+#include "aconfig.h"
+#include "version.h"
+
+#define MAX_BUF 256
+
+struct context {
+ snd_use_case_mgr_t *uc_mgr;
+ const char *command;
+ char *card;
+ char **argv;
+ int argc;
+ int arga;
+ char *batch;
+ unsigned int interactive:1;
+ unsigned int no_open:1;
+ unsigned int do_exit:1;
+};
+
+enum uc_cmd {
+ /* management */
+ OM_UNKNOWN = 0,
+ OM_OPEN,
+ OM_RESET,
+ OM_RELOAD,
+ OM_LISTCARDS,
+ OM_LIST2,
+ OM_LIST1,
+
+ /* set/get */
+ OM_SET,
+ OM_GET,
+ OM_GETI,
+
+ /* misc */
+ OM_HELP,
+ OM_QUIT,
+};
+
+struct cmd {
+ int code;
+ int args;
+ unsigned int opencard:1;
+ const char *id;
+};
+
+static struct cmd cmds[] = {
+ { OM_OPEN, 1, 0, "open" },
+ { OM_RESET, 0, 1, "reset" },
+ { OM_RELOAD, 0, 1, "reload" },
+ { OM_LISTCARDS, 0, 0, "listcards" },
+ { OM_LIST1, 1, 1, "list1" },
+ { OM_LIST2, 1, 1, "list" },
+ { OM_SET, 2, 1, "set" },
+ { OM_GET, 1, 1, "get" },
+ { OM_GETI, 1, 1, "geti" },
+ { OM_HELP, 0, 0, "help" },
+ { OM_QUIT, 0, 0, "quit" },
+ { OM_HELP, 0, 0, "h" },
+ { OM_HELP, 0, 0, "?" },
+ { OM_QUIT, 0, 0, "q" },
+ { OM_UNKNOWN, 0, 0, NULL }
+};
+
+static void dump_help(struct context *context)
+{
+ if (context->command)
+ printf("Usage: %s <options> [command]\n", context->command);
+ printf(
+"\nAvailable options:\n"
+" -h,--help this help\n"
+" -c,--card NAME open card NAME\n"
+" -i,--interactive interactive mode\n"
+" -b,--batch FILE batch mode (use '-' for the stdin input)\n"
+" -n,--no-open do not open first card found\n"
+"\nAvailable commands:\n"
+" open NAME open card NAME\n"
+" reset reset sound card to default state\n"
+" reload reload configuration\n"
+" listcards list available cards\n"
+" list IDENTIFIER list command\n"
+" get IDENTIFIER get string value\n"
+" geti IDENTIFIER get integer value\n"
+" set IDENTIFIER VALUE set string value\n"
+" h,help help\n"
+" q,quit quit\n"
+);
+}
+
+static int parse_line(struct context *context, char *line)
+{
+ char *start, **nargv;
+ int c;
+
+ context->argc = 0;
+ while (*line) {
+ while (*line && (*line == ' ' || *line == '\t' ||
+ *line == '\n'))
+ line++;
+ c = *line;
+ if (c == '\"' || c == '\'') {
+ start = ++line;
+ while (*line && *line != c)
+ line++;
+ if (*line) {
+ *line = '\0';
+ line++;
+ }
+ } else {
+ start = line;
+ while (*line && *line != ' ' && *line != '\t' &&
+ *line != '\n')
+ line++;
+ if (*line) {
+ *line = '\0';
+ line++;
+ }
+ }
+ if (start[0] == '\0' && context->argc == 0)
+ return 0;
+ if (context->argc + 1 >= context->arga) {
+ context->arga += 4;
+ nargv = realloc(context->argv,
+ context->arga * sizeof(char *));
+ if (nargv == NULL)
+ return -ENOMEM;
+ context->argv = nargv;
+ }
+ context->argv[context->argc++] = start;
+ }
+ return 0;
+}
+
+static int do_one(struct context *context, struct cmd *cmd, char **argv)
+{
+ const char **list, *str;
+ long lval;
+ int err, i, j, entries;
+
+ if (cmd->opencard && context->uc_mgr == NULL) {
+ fprintf(stderr, "%s: command '%s' requires an open card\n",
+ context->command, cmd->id);
+ return 0;
+ }
+ switch (cmd->code) {
+ case OM_OPEN:
+ if (context->uc_mgr)
+ snd_use_case_mgr_close(context->uc_mgr);
+ context->uc_mgr = NULL;
+ free(context->card);
+ context->card = strdup(argv[0]);
+ err = snd_use_case_mgr_open(&context->uc_mgr, context->card);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to open sound card %s: %s\n",
+ context->command, context->card,
+ snd_strerror(err));
+ return err;
+ }
+ break;
+ case OM_RESET:
+ err = snd_use_case_mgr_reset(context->uc_mgr);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to reset sound card %s: %s\n",
+ context->command, context->card,
+ snd_strerror(err));
+ return err;
+ }
+ break;
+ case OM_RELOAD:
+ err = snd_use_case_mgr_reload(context->uc_mgr);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to reload manager %s: %s\n",
+ context->command, context->card,
+ snd_strerror(err));
+ return err;
+ }
+ break;
+ case OM_LISTCARDS:
+ err = snd_use_case_card_list(&list);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to get card list: %s\n",
+ context->command,
+ snd_strerror(err));
+ return err;
+ }
+ if (err == 0) {
+ printf(" list is empty\n");
+ return 0;
+ }
+ for (i = 0; i < err / 2; i++) {
+ printf(" %i: %s\n", i, list[i*2]);
+ if (list[i*2+1])
+ printf(" %s\n", list[i*2+1]);
+ }
+ snd_use_case_free_list(list, err);
+ break;
+ case OM_LIST1:
+ case OM_LIST2:
+ switch (cmd->code) {
+ case OM_LIST1:
+ entries = 1;
+ break;
+ case OM_LIST2:
+ entries = 2;
+ break;
+ }
+
+ err = snd_use_case_get_list(context->uc_mgr,
+ argv[0],
+ &list);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to get list %s: %s\n",
+ context->command, argv[0],
+ snd_strerror(err));
+ return err;
+ }
+ if (err == 0) {
+ printf(" list is empty\n");
+ return 0;
+ }
+ for (i = 0; i < err / entries; i++) {
+ printf(" %i: %s\n", i, list[i*entries]);
+ for (j = 0; j < entries - 1; j++)
+ if (list[i*entries+j+1])
+ printf(" %s\n", list[i*entries+j+1]);
+ }
+ snd_use_case_free_list(list, err);
+ break;
+ case OM_SET:
+ err = snd_use_case_set(context->uc_mgr, argv[0], argv[1]);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to set %s=%s: %s\n",
+ context->command, argv[0], argv[1],
+ snd_strerror(err));
+ return err;
+ }
+ break;
+ case OM_GET:
+ err = snd_use_case_get(context->uc_mgr, argv[0], &str);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to get %s: %s\n",
+ context->command, argv[0],
+ snd_strerror(err));
+ return err;
+ }
+ printf(" %s=%s\n", argv[0], str);
+ free((void *)str);
+ break;
+ case OM_GETI:
+ err = snd_use_case_geti(context->uc_mgr, argv[0], &lval);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to get integer %s: %s\n",
+ context->command, argv[0],
+ snd_strerror(err));
+ return lval;
+ }
+ printf(" %s=%li\n", argv[0], lval);
+ break;
+ case OM_QUIT:
+ context->do_exit = 1;
+ break;
+ case OM_HELP:
+ dump_help(context);
+ break;
+ default:
+ fprintf(stderr, "%s: unimplemented command '%s'\n",
+ context->command, cmd->id);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int do_commands(struct context *context)
+{
+ char *command, **argv;
+ struct cmd *cmd;
+ int i, acnt, err;
+
+ for (i = 0; i < context->argc && !context->do_exit; i++) {
+ command = context->argv[i];
+ for (cmd = cmds; cmd->id != NULL; cmd++) {
+ if (strcmp(cmd->id, command) == 0)
+ break;
+ }
+ if (cmd->id == NULL) {
+ fprintf(stderr, "%s: unknown command '%s'\n",
+ context->command, command);
+ return -EINVAL;
+ }
+ acnt = context->argc - (i + 1);
+ if (acnt < cmd->args) {
+ fprintf(stderr, "%s: expected %i arguments (got %i)\n",
+ context->command, cmd->args, acnt);
+ return -EINVAL;
+ }
+ argv = context->argv + i + 1;
+ err = do_one(context, cmd, argv);
+ if (err < 0)
+ return err;
+ i += cmd->args;
+ }
+ return 0;
+}
+
+static void my_exit(struct context *context, int exitcode)
+{
+ if (context->uc_mgr)
+ snd_use_case_mgr_close(context->uc_mgr);
+ if (context->arga > 0)
+ free(context->argv);
+ if (context->card)
+ free(context->card);
+ if (context->batch)
+ free(context->batch);
+ free(context);
+ exit(exitcode);
+}
+
+enum {
+ OPT_VERSION = 1,
+};
+
+int main(int argc, char *argv[])
+{
+ static const char short_options[] = "hb:c:in";
+ static const struct option long_options[] = {
+ {"help", 0, 0, 'h'},
+ {"version", 0, 0, OPT_VERSION},
+ {"card", 1, 0, 'c'},
+ {"interactive", 0, 0, 'i'},
+ {"batch", 1, 0, 'b'},
+ {"no-open", 0, 0, 'n'},
+ {0, 0, 0, 0}
+ };
+ struct context *context;
+ const char *command = argv[0];
+ const char **list;
+ int c, err, option_index;
+ char cmd[MAX_BUF];
+ FILE *in;
+
+ context = calloc(1, sizeof(*context));
+ if (context == NULL)
+ return EXIT_FAILURE;
+ context->command = command;
+ while ((c = getopt_long(argc, argv, short_options,
+ long_options, &option_index)) != -1) {
+ switch (c) {
+ case 'h':
+ dump_help(context);
+ break;
+ case OPT_VERSION:
+ printf("%s: version " SND_UTIL_VERSION_STR "\n", command);
+ break;
+ case 'c':
+ if (context->card)
+ free(context->card);
+ context->card = strdup(optarg);
+ break;
+ case 'i':
+ context->interactive = 1;
+ context->batch = NULL;
+ break;
+ case 'b':
+ context->batch = strdup(optarg);
+ context->interactive = 0;
+ break;
+ case 'n':
+ context->no_open = 1;
+ break;
+ default:
+ fprintf(stderr, "Try '%s --help' for more information.\n", command);
+ my_exit(context, EXIT_FAILURE);
+ }
+ }
+
+ if (!context->no_open && context->card == NULL) {
+ err = snd_use_case_card_list(&list);
+ if (err < 0) {
+ fprintf(stderr, "%s: unable to obtain card list: %s\n", command, snd_strerror(err));
+ my_exit(context, EXIT_FAILURE);
+ }
+ if (err == 0) {
+ printf("No card found\n");
+ my_exit(context, EXIT_SUCCESS);
+ }
+ context->card = strdup(list[0]);
+ snd_use_case_free_list(list, err);
+ }
+
+ /* open library */
+ if (!context->no_open) {
+ err = snd_use_case_mgr_open(&context->uc_mgr,
+ context->card);
+ if (err < 0) {
+ fprintf(stderr,
+ "%s: error failed to open sound card %s: %s\n",
+ command, context->card, snd_strerror(err));
+ my_exit(context, EXIT_FAILURE);
+ }
+ }
+
+ /* parse and execute any command line commands */
+ if (argc > optind) {
+ context->argv = argv + optind;
+ context->argc = argc - optind;
+ err = do_commands(context);
+ if (err < 0)
+ my_exit(context, EXIT_FAILURE);
+ }
+
+ if (!context->interactive && !context->batch)
+ my_exit(context, EXIT_SUCCESS);
+
+ if (context->interactive) {
+ printf("%s: Interacive mode - 'q' to quit\n", command);
+ in = stdin;
+ } else {
+ if (strcmp(context->batch, "-") == 0) {
+ in = stdin;
+ } else {
+ in = fopen(context->batch, "r");
+ if (in == NULL) {
+ fprintf(stderr, "%s: error failed to open file '%s': %s\n",
+ command, context->batch, strerror(-errno));
+ my_exit(context, EXIT_FAILURE);
+ }
+ }
+ }
+
+ /* run the interactive command parser and handler */
+ while (!context->do_exit && !feof(in)) {
+ if (context->interactive)
+ printf("%s>> ", argv[0]);
+ fflush(stdin);
+ if (fgets(cmd, MAX_BUF, in) == NULL)
+ break;
+ err = parse_line(context, cmd);
+ if (err < 0) {
+ fprintf(stderr, "%s: unable to parse line\n",
+ command);
+ my_exit(context, EXIT_FAILURE);
+ }
+ err = do_commands(context);
+ if (err < 0) {
+ if (context->interactive)
+ printf("^^^ error, try again\n");
+ else
+ my_exit(context, EXIT_FAILURE);
+ }
+ }
+
+ if (in != stdin)
+ fclose(in);
+
+ my_exit(context, EXIT_SUCCESS);
+ return EXIT_SUCCESS;
+}
diff --git a/amidi/Android.mk b/amidi/Android.mk
new file mode 100644
index 0000000..b73c9b7
--- /dev/null
+++ b/amidi/Android.mk
@@ -0,0 +1,12 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := amidi
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := amidi.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/amidi/Makefile.am b/amidi/Makefile.am
new file mode 100644
index 0000000..0b31a67
--- /dev/null
+++ b/amidi/Makefile.am
@@ -0,0 +1,5 @@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = amidi.1
+
+bin_PROGRAMS = amidi
+man_MANS = amidi.1
diff --git a/amidi/Makefile.in b/amidi/Makefile.in
new file mode 100644
index 0000000..92b3549
--- /dev/null
+++ b/amidi/Makefile.in
@@ -0,0 +1,645 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = amidi$(EXEEXT)
+subdir = amidi
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+amidi_SOURCES = amidi.c
+amidi_OBJECTS = amidi.$(OBJEXT)
+amidi_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = amidi.c
+DIST_SOURCES = amidi.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = amidi.1
+man_MANS = amidi.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amidi/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign amidi/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+amidi$(EXEEXT): $(amidi_OBJECTS) $(amidi_DEPENDENCIES) $(EXTRA_amidi_DEPENDENCIES)
+ @rm -f amidi$(EXEEXT)
+ $(LINK) $(amidi_OBJECTS) $(amidi_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amidi.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/amidi/NOTICE b/amidi/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/amidi/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/amidi/amidi.1 b/amidi/amidi.1
new file mode 100644
index 0000000..1b4cfb1
--- /dev/null
+++ b/amidi/amidi.1
@@ -0,0 +1,155 @@
+.TH AMIDI 1 "26 Jun 2006"
+
+.SH NAME
+amidi \- read from and write to ALSA RawMIDI ports
+
+.SH SYNOPSIS
+\fBamidi\fP [\fI\-p port\fP] [\fI\-s file\fP | \fI\-S data\fP]
+[\fI\-r file\fP] [\fI\-d\fP] [\fI\-t seconds\fP] [\fI\-a\fP]
+
+.SH DESCRIPTION
+.B amidi
+is a command-line utility which allows one to receive and send
+SysEx (system exclusive) data from/to external MIDI devices.
+It can also send any other MIDI commands.
+
+.B amidi
+handles only files containing raw MIDI commands, without timing
+information.
+.B amidi
+does not support Standard MIDI (.mid) files, but
+.B aplaymidi(1)
+and
+.B arecordmidi(1)
+do.
+
+.SH OPTIONS
+
+Use the
+.I \-h,
+.I \-V,
+.I \-l,
+or
+.I \-L
+options to display information;
+or use at least one of the
+.I \-s,
+.I \-r,
+.I \-S,
+or
+.I \-d
+options to specify what data to send or receive.
+
+.TP
+.I \-h, \-\-help
+Help: prints a list of options.
+
+.TP
+.I \-V, \-\-version
+Prints the current version.
+
+.TP
+.I \-l, \-\-list\-devices
+Prints a list of all hardware MIDI ports.
+
+.TP
+.I \-L, \-\-list\-rawmidis
+Prints all RawMIDI definitions.
+(used when debugging configuration files)
+
+.TP
+.I \-p, \-\-port=name
+Sets the name of the ALSA RawMIDI port to use.
+If this is not specified,
+.B amidi
+uses the default port defined in the configuration file
+(the default for this is port 0 on card 0, which may not exist).
+
+.TP
+.I \-s, \-\-send=filename
+Sends the contents of the specified file to the MIDI port.
+The file must contain raw MIDI commands (e.g. a .syx file);
+for Standard MIDI (.mid) files, use
+.B aplaymidi(1).
+
+.TP
+.I \-r, \-\-receive=filename
+Writes data received from the MIDI port into the specified file.
+The file will contain raw MIDI commands (such as in a .syx file);
+to record a Standard MIDI (.mid) file, use
+.B arecordmidi(1).
+
+.B amidi
+will filter out any Active Sensing bytes (FEh), unless the
+.I \-a
+option has been given.
+
+.TP
+.I \-S, \-\-send\-hex="..."
+Sends the bytes specified as hexadecimal numbers to the MIDI port.
+
+.TP
+.I \-d, \-\-dump
+Prints data received from the MIDI port as hexadecimal bytes.
+Active Sensing bytes (FEh) will not be shown, unless the
+.I \-a
+option has been given.
+
+This option is useful for debugging.
+
+.TP
+.I \-t, \-\-timeout=seconds
+Stops receiving data when no data has been received for the specified
+amount of time.
+
+If this option has not been given, you must press Ctrl+C (or kill
+.B amidi\fR)
+to stop receiving data.
+
+.TP
+.I \-a, \-\-active\-sensing
+Does not ignore Active Sensing bytes (FEh) when saving or printing
+received MIDI commands.
+
+.SH EXAMPLES
+
+.TP
+.B amidi \-p hw:0 \-s my_settings.syx
+will send the MIDI commands in
+.I my_settings.syx
+to port
+.I hw:0.
+
+.TP
+.B amidi \-S 'F0 43 10 4C 00 00 7E 00 F7'
+sends an XG Reset to the default port.
+
+.TP
+.B amidi \-p hw:1,2 \-S F0411042110C000000000074F7 \-r dump.syx \-t 1
+sends a \(lqParameter Dump Request\(rq to a GS device, saves the received
+parameter data to the file
+.I dump.syx,
+and stops after the device has finished sending data
+(when no data has been received for one second).
+
+.TP
+.B amidi \-p virtual \-d
+creates a virtual RawMIDI port and prints all data sent to this port.
+
+.SH FILES
+.I /usr/share/alsa/alsa.conf
+default rawmidi definitions
+.br
+.I /etc/asound.conf
+system\-wide rawmidi definitions
+.br
+.I ~/.asoundrc
+user specific rawmidi definitions
+
+.SH SEE ALSO
+aplaymidi(1)
+.br
+arecordmidi(1)
+
+.SH AUTHOR
+Clemens Ladisch <clemens@ladisch.de>
diff --git a/amidi/amidi.c b/amidi/amidi.c
new file mode 100644
index 0000000..cedf18c
--- /dev/null
+++ b/amidi/amidi.c
@@ -0,0 +1,620 @@
+/*
+ * amidi.c - read from/write to RawMIDI ports
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <ctype.h>
+#include <getopt.h>
+#include <errno.h>
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/poll.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "version.h"
+
+static int do_device_list, do_rawmidi_list;
+static char *port_name = "default";
+static char *send_file_name;
+static char *receive_file_name;
+static char *send_hex;
+static char *send_data;
+static int send_data_length;
+static int receive_file;
+static int dump;
+static int timeout;
+static int stop;
+static snd_rawmidi_t *input, **inputp;
+static snd_rawmidi_t *output, **outputp;
+
+static void error(const char *format, ...)
+{
+ va_list ap;
+
+ va_start(ap, format);
+ vfprintf(stderr, format, ap);
+ va_end(ap);
+ putc('\n', stderr);
+}
+
+static void usage(void)
+{
+ printf(
+ "Usage: amidi options\n"
+ "\n"
+ "-h, --help this help\n"
+ "-V, --version print current version\n"
+ "-l, --list-devices list all hardware ports\n"
+ "-L, --list-rawmidis list all RawMIDI definitions\n"
+ "-p, --port=name select port by name\n"
+ "-s, --send=file send the contents of a (.syx) file\n"
+ "-r, --receive=file write received data into a file\n"
+ "-S, --send-hex=\"...\" send hexadecimal bytes\n"
+ "-d, --dump print received data as hexadecimal bytes\n"
+ "-t, --timeout=seconds exits when no data has been received\n"
+ " for the specified duration\n"
+ "-a, --active-sensing don't ignore active sensing bytes\n");
+}
+
+static void version(void)
+{
+ puts("amidi version " SND_UTIL_VERSION_STR);
+}
+
+static void *my_malloc(size_t size)
+{
+ void *p = malloc(size);
+ if (!p) {
+ error("out of memory");
+ exit(EXIT_FAILURE);
+ }
+ return p;
+}
+
+static void list_device(snd_ctl_t *ctl, int card, int device)
+{
+ snd_rawmidi_info_t *info;
+ const char *name;
+ const char *sub_name;
+ int subs, subs_in, subs_out;
+ int sub;
+ int err;
+
+ snd_rawmidi_info_alloca(&info);
+ snd_rawmidi_info_set_device(info, device);
+
+ snd_rawmidi_info_set_stream(info, SND_RAWMIDI_STREAM_INPUT);
+ err = snd_ctl_rawmidi_info(ctl, info);
+ if (err >= 0)
+ subs_in = snd_rawmidi_info_get_subdevices_count(info);
+ else
+ subs_in = 0;
+
+ snd_rawmidi_info_set_stream(info, SND_RAWMIDI_STREAM_OUTPUT);
+ err = snd_ctl_rawmidi_info(ctl, info);
+ if (err >= 0)
+ subs_out = snd_rawmidi_info_get_subdevices_count(info);
+ else
+ subs_out = 0;
+
+ subs = subs_in > subs_out ? subs_in : subs_out;
+ if (!subs)
+ return;
+
+ for (sub = 0; sub < subs; ++sub) {
+ snd_rawmidi_info_set_stream(info, sub < subs_in ?
+ SND_RAWMIDI_STREAM_INPUT :
+ SND_RAWMIDI_STREAM_OUTPUT);
+ snd_rawmidi_info_set_subdevice(info, sub);
+ err = snd_ctl_rawmidi_info(ctl, info);
+ if (err < 0) {
+ error("cannot get rawmidi information %d:%d:%d: %s\n",
+ card, device, sub, snd_strerror(err));
+ return;
+ }
+ name = snd_rawmidi_info_get_name(info);
+ sub_name = snd_rawmidi_info_get_subdevice_name(info);
+ if (sub == 0 && sub_name[0] == '\0') {
+ printf("%c%c hw:%d,%d %s",
+ sub < subs_in ? 'I' : ' ',
+ sub < subs_out ? 'O' : ' ',
+ card, device, name);
+ if (subs > 1)
+ printf(" (%d subdevices)", subs);
+ putchar('\n');
+ break;
+ } else {
+ printf("%c%c hw:%d,%d,%d %s\n",
+ sub < subs_in ? 'I' : ' ',
+ sub < subs_out ? 'O' : ' ',
+ card, device, sub, sub_name);
+ }
+ }
+}
+
+static void list_card_devices(int card)
+{
+ snd_ctl_t *ctl;
+ char name[32];
+ int device;
+ int err;
+
+ sprintf(name, "hw:%d", card);
+ if ((err = snd_ctl_open(&ctl, name, 0)) < 0) {
+ error("cannot open control for card %d: %s", card, snd_strerror(err));
+ return;
+ }
+ device = -1;
+ for (;;) {
+ if ((err = snd_ctl_rawmidi_next_device(ctl, &device)) < 0) {
+ error("cannot determine device number: %s", snd_strerror(err));
+ break;
+ }
+ if (device < 0)
+ break;
+ list_device(ctl, card, device);
+ }
+ snd_ctl_close(ctl);
+}
+
+static void device_list(void)
+{
+ int card, err;
+
+ card = -1;
+ if ((err = snd_card_next(&card)) < 0) {
+ error("cannot determine card number: %s", snd_strerror(err));
+ return;
+ }
+ if (card < 0) {
+ error("no sound card found");
+ return;
+ }
+ puts("Dir Device Name");
+ do {
+ list_card_devices(card);
+ if ((err = snd_card_next(&card)) < 0) {
+ error("cannot determine card number: %s", snd_strerror(err));
+ break;
+ }
+ } while (card >= 0);
+}
+
+static void rawmidi_list(void)
+{
+ snd_output_t *output;
+ snd_config_t *config;
+ int err;
+
+ if ((err = snd_config_update()) < 0) {
+ error("snd_config_update failed: %s", snd_strerror(err));
+ return;
+ }
+ if ((err = snd_output_stdio_attach(&output, stdout, 0)) < 0) {
+ error("snd_output_stdio_attach failed: %s", snd_strerror(err));
+ return;
+ }
+ if (snd_config_search(snd_config, "rawmidi", &config) >= 0) {
+ puts("RawMIDI list:");
+ snd_config_save(config, output);
+ }
+ snd_output_close(output);
+}
+
+static void load_file(void)
+{
+ int fd;
+ off_t length;
+
+ fd = open(send_file_name, O_RDONLY);
+ if (fd == -1) {
+ error("cannot open %s - %s", send_file_name, strerror(errno));
+ return;
+ }
+ length = lseek(fd, 0, SEEK_END);
+ if (length == (off_t)-1) {
+ error("cannot determine length of %s: %s", send_file_name, strerror(errno));
+ goto _error;
+ }
+ send_data = my_malloc(length);
+ lseek(fd, 0, SEEK_SET);
+ if (read(fd, send_data, length) != length) {
+ error("cannot read from %s: %s", send_file_name, strerror(errno));
+ goto _error;
+ }
+ if (length >= 4 && !memcmp(send_data, "MThd", 4)) {
+ error("%s is a Standard MIDI File; use aplaymidi to send it", send_file_name);
+ goto _error;
+ }
+ send_data_length = length;
+ goto _exit;
+_error:
+ free(send_data);
+ send_data = NULL;
+_exit:
+ close(fd);
+}
+
+static int hex_value(char c)
+{
+ if ('0' <= c && c <= '9')
+ return c - '0';
+ if ('A' <= c && c <= 'F')
+ return c - 'A' + 10;
+ if ('a' <= c && c <= 'f')
+ return c - 'a' + 10;
+ error("invalid character %c", c);
+ return -1;
+}
+
+static void parse_data(void)
+{
+ const char *p;
+ int i, value;
+
+ send_data = my_malloc(strlen(send_hex)); /* guesstimate */
+ i = 0;
+ value = -1; /* value is >= 0 when the first hex digit of a byte has been read */
+ for (p = send_hex; *p; ++p) {
+ int digit;
+ if (isspace((unsigned char)*p)) {
+ if (value >= 0) {
+ send_data[i++] = value;
+ value = -1;
+ }
+ continue;
+ }
+ digit = hex_value(*p);
+ if (digit < 0) {
+ send_data = NULL;
+ return;
+ }
+ if (value < 0) {
+ value = digit;
+ } else {
+ send_data[i++] = (value << 4) | digit;
+ value = -1;
+ }
+ }
+ if (value >= 0)
+ send_data[i++] = value;
+ send_data_length = i;
+}
+
+/*
+ * prints MIDI commands, formatting them nicely
+ */
+static void print_byte(unsigned char byte)
+{
+ static enum {
+ STATE_UNKNOWN,
+ STATE_1PARAM,
+ STATE_1PARAM_CONTINUE,
+ STATE_2PARAM_1,
+ STATE_2PARAM_2,
+ STATE_2PARAM_1_CONTINUE,
+ STATE_SYSEX
+ } state = STATE_UNKNOWN;
+ int newline = 0;
+
+ if (byte >= 0xf8)
+ newline = 1;
+ else if (byte >= 0xf0) {
+ newline = 1;
+ switch (byte) {
+ case 0xf0:
+ state = STATE_SYSEX;
+ break;
+ case 0xf1:
+ case 0xf3:
+ state = STATE_1PARAM;
+ break;
+ case 0xf2:
+ state = STATE_2PARAM_1;
+ break;
+ case 0xf4:
+ case 0xf5:
+ case 0xf6:
+ state = STATE_UNKNOWN;
+ break;
+ case 0xf7:
+ newline = state != STATE_SYSEX;
+ state = STATE_UNKNOWN;
+ break;
+ }
+ } else if (byte >= 0x80) {
+ newline = 1;
+ if (byte >= 0xc0 && byte <= 0xdf)
+ state = STATE_1PARAM;
+ else
+ state = STATE_2PARAM_1;
+ } else /* b < 0x80 */ {
+ int running_status = 0;
+ newline = state == STATE_UNKNOWN;
+ switch (state) {
+ case STATE_1PARAM:
+ state = STATE_1PARAM_CONTINUE;
+ break;
+ case STATE_1PARAM_CONTINUE:
+ running_status = 1;
+ break;
+ case STATE_2PARAM_1:
+ state = STATE_2PARAM_2;
+ break;
+ case STATE_2PARAM_2:
+ state = STATE_2PARAM_1_CONTINUE;
+ break;
+ case STATE_2PARAM_1_CONTINUE:
+ running_status = 1;
+ state = STATE_2PARAM_2;
+ break;
+ default:
+ break;
+ }
+ if (running_status)
+ fputs("\n ", stdout);
+ }
+ printf("%c%02X", newline ? '\n' : ' ', byte);
+}
+
+static void sig_handler(int dummy)
+{
+ stop = 1;
+}
+
+static void add_send_hex_data(const char *str)
+{
+ int length;
+ char *s;
+
+ length = (send_hex ? strlen(send_hex) + 1 : 0) + strlen(str) + 1;
+ s = my_malloc(length);
+ if (send_hex) {
+ strcpy(s, send_hex);
+ strcat(s, " ");
+ } else {
+ s[0] = '\0';
+ }
+ strcat(s, str);
+ free(send_hex);
+ send_hex = s;
+}
+
+int main(int argc, char *argv[])
+{
+ static const char short_options[] = "hVlLp:s:r:S::dt:a";
+ static const struct option long_options[] = {
+ {"help", 0, NULL, 'h'},
+ {"version", 0, NULL, 'V'},
+ {"list-devices", 0, NULL, 'l'},
+ {"list-rawmidis", 0, NULL, 'L'},
+ {"port", 1, NULL, 'p'},
+ {"send", 1, NULL, 's'},
+ {"receive", 1, NULL, 'r'},
+ {"send-hex", 2, NULL, 'S'},
+ {"dump", 0, NULL, 'd'},
+ {"timeout", 1, NULL, 't'},
+ {"active-sensing", 0, NULL, 'a'},
+ { }
+ };
+ int c, err, ok = 0;
+ int ignore_active_sensing = 1;
+ int do_send_hex = 0;
+
+ while ((c = getopt_long(argc, argv, short_options,
+ long_options, NULL)) != -1) {
+ switch (c) {
+ case 'h':
+ usage();
+ return 0;
+ case 'V':
+ version();
+ return 0;
+ case 'l':
+ do_device_list = 1;
+ break;
+ case 'L':
+ do_rawmidi_list = 1;
+ break;
+ case 'p':
+ port_name = optarg;
+ break;
+ case 's':
+ send_file_name = optarg;
+ break;
+ case 'r':
+ receive_file_name = optarg;
+ break;
+ case 'S':
+ do_send_hex = 1;
+ if (optarg)
+ add_send_hex_data(optarg);
+ break;
+ case 'd':
+ dump = 1;
+ break;
+ case 't':
+ timeout = atoi(optarg);
+ break;
+ case 'a':
+ ignore_active_sensing = 0;
+ break;
+ default:
+ error("Try `amidi --help' for more information.");
+ return 1;
+ }
+ }
+ if (do_send_hex) {
+ /* data for -S can be specified as multiple arguments */
+ if (!send_hex && !argv[optind]) {
+ error("Please specify some data for --send-hex.");
+ return 1;
+ }
+ for (; argv[optind]; ++optind)
+ add_send_hex_data(argv[optind]);
+ } else {
+ if (argv[optind]) {
+ error("%s is not an option.", argv[optind]);
+ return 1;
+ }
+ }
+
+ if (do_rawmidi_list)
+ rawmidi_list();
+ if (do_device_list)
+ device_list();
+ if (do_rawmidi_list || do_device_list)
+ return 0;
+
+ if (!send_file_name && !receive_file_name && !send_hex && !dump) {
+ error("Please specify at least one of --send, --receive, --send-hex, or --dump.");
+ return 1;
+ }
+ if (send_file_name && send_hex) {
+ error("--send and --send-hex cannot be specified at the same time.");
+ return 1;
+ }
+
+ if (send_file_name)
+ load_file();
+ else if (send_hex)
+ parse_data();
+ if ((send_file_name || send_hex) && !send_data)
+ return 1;
+
+ if (receive_file_name) {
+ receive_file = creat(receive_file_name, 0666);
+ if (receive_file == -1) {
+ error("cannot create %s: %s", receive_file_name, strerror(errno));
+ return -1;
+ }
+ } else {
+ receive_file = -1;
+ }
+
+ if (receive_file_name || dump)
+ inputp = &input;
+ else
+ inputp = NULL;
+ if (send_data)
+ outputp = &output;
+ else
+ outputp = NULL;
+
+ if ((err = snd_rawmidi_open(inputp, outputp, port_name, SND_RAWMIDI_NONBLOCK)) < 0) {
+ error("cannot open port \"%s\": %s", port_name, snd_strerror(err));
+ goto _exit2;
+ }
+
+ if (inputp)
+ snd_rawmidi_read(input, NULL, 0); /* trigger reading */
+
+ if (send_data) {
+ if ((err = snd_rawmidi_nonblock(output, 0)) < 0) {
+ error("cannot set blocking mode: %s", snd_strerror(err));
+ goto _exit;
+ }
+ if ((err = snd_rawmidi_write(output, send_data, send_data_length)) < 0) {
+ error("cannot send data: %s", snd_strerror(err));
+ goto _exit;
+ }
+ }
+
+ if (inputp) {
+ int read = 0;
+ int npfds, time = 0;
+ struct pollfd *pfds;
+
+ timeout *= 1000;
+ npfds = snd_rawmidi_poll_descriptors_count(input);
+ pfds = alloca(npfds * sizeof(struct pollfd));
+ snd_rawmidi_poll_descriptors(input, pfds, npfds);
+ signal(SIGINT, sig_handler);
+ for (;;) {
+ unsigned char buf[256];
+ int i, length;
+ unsigned short revents;
+
+ err = poll(pfds, npfds, 200);
+ if (stop || (err < 0 && errno == EINTR))
+ break;
+ if (err < 0) {
+ error("poll failed: %s", strerror(errno));
+ break;
+ }
+ if (err == 0) {
+ time += 200;
+ if (timeout && time >= timeout)
+ break;
+ continue;
+ }
+ if ((err = snd_rawmidi_poll_descriptors_revents(input, pfds, npfds, &revents)) < 0) {
+ error("cannot get poll events: %s", snd_strerror(errno));
+ break;
+ }
+ if (revents & (POLLERR | POLLHUP))
+ break;
+ if (!(revents & POLLIN))
+ continue;
+ err = snd_rawmidi_read(input, buf, sizeof(buf));
+ if (err == -EAGAIN)
+ continue;
+ if (err < 0) {
+ error("cannot read from port \"%s\": %s", port_name, snd_strerror(err));
+ break;
+ }
+ length = 0;
+ for (i = 0; i < err; ++i)
+ if (!ignore_active_sensing || buf[i] != 0xfe)
+ buf[length++] = buf[i];
+ if (length == 0)
+ continue;
+ read += length;
+ time = 0;
+ if (receive_file != -1)
+ write(receive_file, buf, length);
+ if (dump) {
+ for (i = 0; i < length; ++i)
+ print_byte(buf[i]);
+ fflush(stdout);
+ }
+ }
+ if (isatty(fileno(stdout)))
+ printf("\n%d bytes read\n", read);
+ }
+
+ ok = 1;
+_exit:
+ if (inputp)
+ snd_rawmidi_close(input);
+ if (outputp)
+ snd_rawmidi_close(output);
+_exit2:
+ if (receive_file != -1)
+ close(receive_file);
+ return !ok;
+}
diff --git a/amixer/Android.mk b/amixer/Android.mk
new file mode 100644
index 0000000..ec69411
--- /dev/null
+++ b/amixer/Android.mk
@@ -0,0 +1,13 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := amixer
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := amixer.c \
+ ../alsamixer/volume_mapping.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/amixer/Makefile.am b/amixer/Makefile.am
new file mode 100644
index 0000000..ba67a57
--- /dev/null
+++ b/amixer/Makefile.am
@@ -0,0 +1,10 @@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = -lm
+# LDFLAGS = -static
+# CFLAGS += -g -Wall
+
+bin_PROGRAMS = amixer
+amixer_SOURCES = amixer.c ../alsamixer/volume_mapping.c
+noinst_HEADERS = amixer.h
+man_MANS = amixer.1
+EXTRA_DIST = amixer.1
diff --git a/amixer/Makefile.in b/amixer/Makefile.in
new file mode 100644
index 0000000..b0cde8a
--- /dev/null
+++ b/amixer/Makefile.in
@@ -0,0 +1,666 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = amixer$(EXEEXT)
+subdir = amixer
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_amixer_OBJECTS = amixer.$(OBJEXT) volume_mapping.$(OBJEXT)
+amixer_OBJECTS = $(am_amixer_OBJECTS)
+amixer_LDADD = $(LDADD)
+amixer_DEPENDENCIES =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(amixer_SOURCES)
+DIST_SOURCES = $(amixer_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = -lm
+amixer_SOURCES = amixer.c ../alsamixer/volume_mapping.c
+noinst_HEADERS = amixer.h
+man_MANS = amixer.1
+EXTRA_DIST = amixer.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amixer/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign amixer/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+amixer$(EXEEXT): $(amixer_OBJECTS) $(amixer_DEPENDENCIES) $(EXTRA_amixer_DEPENDENCIES)
+ @rm -f amixer$(EXEEXT)
+ $(LINK) $(amixer_OBJECTS) $(amixer_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amixer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/volume_mapping.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+volume_mapping.o: ../alsamixer/volume_mapping.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT volume_mapping.o -MD -MP -MF $(DEPDIR)/volume_mapping.Tpo -c -o volume_mapping.o `test -f '../alsamixer/volume_mapping.c' || echo '$(srcdir)/'`../alsamixer/volume_mapping.c
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/volume_mapping.Tpo $(DEPDIR)/volume_mapping.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../alsamixer/volume_mapping.c' object='volume_mapping.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o volume_mapping.o `test -f '../alsamixer/volume_mapping.c' || echo '$(srcdir)/'`../alsamixer/volume_mapping.c
+
+volume_mapping.obj: ../alsamixer/volume_mapping.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT volume_mapping.obj -MD -MP -MF $(DEPDIR)/volume_mapping.Tpo -c -o volume_mapping.obj `if test -f '../alsamixer/volume_mapping.c'; then $(CYGPATH_W) '../alsamixer/volume_mapping.c'; else $(CYGPATH_W) '$(srcdir)/../alsamixer/volume_mapping.c'; fi`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/volume_mapping.Tpo $(DEPDIR)/volume_mapping.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../alsamixer/volume_mapping.c' object='volume_mapping.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o volume_mapping.obj `if test -f '../alsamixer/volume_mapping.c'; then $(CYGPATH_W) '../alsamixer/volume_mapping.c'; else $(CYGPATH_W) '$(srcdir)/../alsamixer/volume_mapping.c'; fi`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/amixer/NOTICE b/amixer/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/amixer/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/amixer/amixer.1 b/amixer/amixer.1
new file mode 100644
index 0000000..76007d2
--- /dev/null
+++ b/amixer/amixer.1
@@ -0,0 +1,158 @@
+.TH AMIXER 1 "11 Aug 2000"
+.SH NAME
+amixer \- command-line mixer for ALSA soundcard driver
+.SH SYNOPSIS
+\fBamixer\fP [\fI\-option\fP] [\fIcmd\fP]
+.SH DESCRIPTION
+\fBamixer\fP allows command\-line control of the mixer for the ALSA
+soundcard driver.
+\fBamixer\fP supports multiple soundcards.
+
+\fBamixer\fR with no arguments will display the current mixer settings
+for the default soundcard and device. This is a good way to see a list
+of the simple mixer controls you can use.
+
+.SH COMMANDS
+
+.TP
+\fIhelp\fP
+Shows syntax.
+
+.TP
+\fIinfo\fP
+Shows the information about a mixer device.
+
+.TP
+\fIscontrols\fP
+Shows a complete list of simple mixer controls.
+
+.TP
+\fIscontents\fP
+Shows a complete list of simple mixer controls with their contents.
+
+.TP
+\fIset\fP or \fIsset\fP <\fISCONTROL\fP> <\fIPARAMETER\fP> ...
+Sets the simple mixer control contents. The parameter can be the volume
+either as a percentage from 0% to 100% with \fI%\fP suffix,
+a dB gain with \fIdB\fP suffix (like \-12.5dB), or an exact hardware value.
+The dB gain can be used only for the mixer elements with available
+dB information.
+When plus(+) or minus(\-) letter is appended after
+volume value, the volume is incremented or decremented from the current
+value, respectively.
+
+The parameters \fIcap, nocap, mute, unmute, toggle\fP are used to
+change capture (recording) and muting for the group specified.
+
+The optional modifiers can be put as extra parameters to specify
+the stream direction or channels to apply.
+The modifiers \fIplayback\fP and \fIcapture\fP specify the stream,
+and the modifiers \fIfront, rear, center, woofer\fP are used to specify
+channels to be changed.
+
+A simple mixer control must be specified. Only one device can be controlled
+at a time.
+
+.TP
+\fIget\fP or \fIsget\fP <\fISCONTROL\fP>
+Shows the simple mixer control contents.
+
+A simple mixer control must be specified. Only one device can be controlled
+at a time.
+
+.TP
+\fIcontrols\fP
+Shows a complete list of card controls.
+
+.TP
+\fIcontents\fP
+Shows a complete list of card controls with their contents.
+
+.TP
+\fIcset\fP <\fICONTROL\fP> <\fIPARAMETER\fP> ...
+Sets the card control contents. The identifier has these components: iface,
+name, index, device, subdevice, numid. The next argument specifies the value
+of control.
+
+.TP
+\fIcget\fP <\fICONTROL\fP>
+Shows the card control contents. The identifier has same syntax as for
+the \fIcset\fP command.
+
+.SH OPTIONS
+
+.TP
+\fI\-c\fP card
+
+Select the card number to control. The device name created from this
+parameter has syntax 'hw:N' where N is specified card number.
+
+.TP
+\fI\-D\fP device
+
+Select the device name to control. The default control name is 'default'.
+
+.TP
+\fI\-s\fP | \fI\-\-stdin\fP
+
+Read from stdin and execute the command on each line sequentially.
+When this option is given, the command in command\-line arguments is ignored.
+
+Only sset and cset are accepted. Other commands are ignored.
+The commands to unmatched ids are ignored without errors too.
+
+.TP
+\fI\-h\fP
+Help: show syntax.
+
+.TP
+\fI\-q\fP
+Quiet mode. Do not show results of changes.
+
+.TP
+\fI\-R\fP
+Use the raw value for evaluating the percentage representation.
+This is the default mode.
+
+.TP
+\fI\-M\fP
+Use the mapped volume for evaluating the percentage representation
+like \fBalsamixer\fR, to be more natural for human ear.
+
+.SH EXAMPLES
+
+.TP
+\fBamixer \-c 1 sset Line,0 80%,40% unmute cap\fR
+will set the second soundcard's left line input volume to 80% and
+right line input to 40%, unmute it, and select it as a source for
+capture (recording).\fR
+
+.TP
+\fBamixer \-c 1 \-\- sset Master playback \-20dB\fR
+will set the master volume of the second card to \-20dB. If the master
+has multiple channels, all channels are set to the same value.
+
+.TP
+\fBamixer \-c 1 set PCM 2dB+\fR
+will increase the PCM volume of the second card with 2dB. When both
+playback and capture volumes exist, this is applied to both volumes.
+
+.TP
+\fBamixer \-c 2 cset iface=MIXER,name='Line Playback Volume",index=1 40%\fR
+will set the third soundcard's second line playback volume(s) to 40%
+
+.TP
+\fBamixer \-c 2 cset numid=34 40%\fR
+will set the 34th soundcard element to 40%
+
+.SH SEE ALSO
+\fB
+alsamixer(1)
+\fP
+
+.SH BUGS
+None known.
+
+.SH AUTHOR
+\fBamixer\fP is by Jaroslav Kysela <perex@perex.cz>.
+This document is by Paul Winkler <zarmzarm@erols.com> and Jaroslav Kysela <perex@perex.cz>.
diff --git a/amixer/amixer.c b/amixer/amixer.c
new file mode 100644
index 0000000..7727943
--- /dev/null
+++ b/amixer/amixer.c
@@ -0,0 +1,1868 @@
+/*
+ * ALSA command line mixer utility
+ * Copyright (c) 1999-2000 by Jaroslav Kysela <perex@perex.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <getopt.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <math.h>
+#include <errno.h>
+#include <assert.h>
+#include <alsa/asoundlib.h>
+#include <sys/poll.h>
+#include <stdint.h>
+#include "amixer.h"
+#include "../alsamixer/volume_mapping.h"
+
+#define LEVEL_BASIC (1<<0)
+#define LEVEL_INACTIVE (1<<1)
+#define LEVEL_ID (1<<2)
+
+static int quiet = 0;
+static int debugflag = 0;
+static int no_check = 0;
+static int smixer_level = 0;
+static int ignore_error = 0;
+static struct snd_mixer_selem_regopt smixer_options;
+static char card[64] = "default";
+
+static void error(const char *fmt,...)
+{
+ va_list va;
+
+ va_start(va, fmt);
+ fprintf(stderr, "amixer: ");
+ vfprintf(stderr, fmt, va);
+ fprintf(stderr, "\n");
+ va_end(va);
+}
+
+static int help(void)
+{
+ printf("Usage: amixer <options> [command]\n");
+ printf("\nAvailable options:\n");
+ printf(" -h,--help this help\n");
+ printf(" -c,--card N select the card\n");
+ printf(" -D,--device N select the device, default '%s'\n", card);
+ printf(" -d,--debug debug mode\n");
+ printf(" -n,--nocheck do not perform range checking\n");
+ printf(" -v,--version print version of this program\n");
+ printf(" -q,--quiet be quiet\n");
+ printf(" -i,--inactive show also inactive controls\n");
+ printf(" -a,--abstract L select abstraction level (none or basic)\n");
+ printf(" -s,--stdin Read and execute commands from stdin sequentially\n");
+ printf(" -R,--raw-volume Use the raw value (default)\n");
+ printf(" -M,--mapped-volume Use the mapped volume\n");
+ printf("\nAvailable commands:\n");
+ printf(" scontrols show all mixer simple controls\n");
+ printf(" scontents show contents of all mixer simple controls (default command)\n");
+ printf(" sset sID P set contents for one mixer simple control\n");
+ printf(" sget sID get contents for one mixer simple control\n");
+ printf(" controls show all controls for given card\n");
+ printf(" contents show contents of all controls for given card\n");
+ printf(" cset cID P set control contents for one control\n");
+ printf(" cget cID get control contents for one control\n");
+ return 0;
+}
+
+static int info(void)
+{
+ int err;
+ snd_ctl_t *handle;
+ snd_mixer_t *mhandle;
+ snd_ctl_card_info_t *info;
+ snd_ctl_elem_list_t *clist;
+ snd_ctl_card_info_alloca(&info);
+ snd_ctl_elem_list_alloca(&clist);
+
+ if ((err = snd_ctl_open(&handle, card, 0)) < 0) {
+ error("Control device %s open error: %s", card, snd_strerror(err));
+ return err;
+ }
+
+ if ((err = snd_ctl_card_info(handle, info)) < 0) {
+ error("Control device %s hw info error: %s", card, snd_strerror(err));
+ return err;
+ }
+ printf("Card %s '%s'/'%s'\n", card, snd_ctl_card_info_get_id(info),
+ snd_ctl_card_info_get_longname(info));
+ printf(" Mixer name : '%s'\n", snd_ctl_card_info_get_mixername(info));
+ printf(" Components : '%s'\n", snd_ctl_card_info_get_components(info));
+ if ((err = snd_ctl_elem_list(handle, clist)) < 0) {
+ error("snd_ctl_elem_list failure: %s", snd_strerror(err));
+ } else {
+ printf(" Controls : %i\n", snd_ctl_elem_list_get_count(clist));
+ }
+ snd_ctl_close(handle);
+ if ((err = snd_mixer_open(&mhandle, 0)) < 0) {
+ error("Mixer open error: %s", snd_strerror(err));
+ return err;
+ }
+ if (smixer_level == 0 && (err = snd_mixer_attach(mhandle, card)) < 0) {
+ error("Mixer attach %s error: %s", card, snd_strerror(err));
+ snd_mixer_close(mhandle);
+ return err;
+ }
+ if ((err = snd_mixer_selem_register(mhandle, smixer_level > 0 ? &smixer_options : NULL, NULL)) < 0) {
+ error("Mixer register error: %s", snd_strerror(err));
+ snd_mixer_close(mhandle);
+ return err;
+ }
+ err = snd_mixer_load(mhandle);
+ if (err < 0) {
+ error("Mixer load %s error: %s", card, snd_strerror(err));
+ snd_mixer_close(mhandle);
+ return err;
+ }
+ printf(" Simple ctrls : %i\n", snd_mixer_get_count(mhandle));
+ snd_mixer_close(mhandle);
+ return 0;
+}
+
+static const char *control_type(snd_ctl_elem_info_t *info)
+{
+ return snd_ctl_elem_type_name(snd_ctl_elem_info_get_type(info));
+}
+
+static const char *control_access(snd_ctl_elem_info_t *info)
+{
+ static char result[10];
+ char *res = result;
+
+ *res++ = snd_ctl_elem_info_is_readable(info) ? 'r' : '-';
+ *res++ = snd_ctl_elem_info_is_writable(info) ? 'w' : '-';
+ *res++ = snd_ctl_elem_info_is_inactive(info) ? 'i' : '-';
+ *res++ = snd_ctl_elem_info_is_volatile(info) ? 'v' : '-';
+ *res++ = snd_ctl_elem_info_is_locked(info) ? 'l' : '-';
+ *res++ = snd_ctl_elem_info_is_tlv_readable(info) ? 'R' : '-';
+ *res++ = snd_ctl_elem_info_is_tlv_writable(info) ? 'W' : '-';
+ *res++ = snd_ctl_elem_info_is_tlv_commandable(info) ? 'C' : '-';
+ *res++ = '\0';
+ return result;
+}
+
+#define check_range(val, min, max) \
+ (no_check ? (val) : ((val < min) ? (min) : (val > max) ? (max) : (val)))
+#if 0
+static int convert_range(int val, int omin, int omax, int nmin, int nmax)
+{
+ int orange = omax - omin, nrange = nmax - nmin;
+
+ if (orange == 0)
+ return 0;
+ return rint((((double)nrange * ((double)val - (double)omin)) + ((double)orange / 2.0)) / ((double)orange + (double)nmin));
+}
+#endif
+
+#if 0
+static int convert_db_range(int val, int omin, int omax, int nmin, int nmax)
+{
+ int orange = omax - omin, nrange = nmax - nmin;
+
+ if (orange == 0)
+ return 0;
+ return rint((((double)nrange * ((double)val - (double)omin)) + ((double)orange / 2.0)) / (double)orange + (double)nmin);
+}
+#endif
+
+/* Fuction to convert from volume to percentage. val = volume */
+
+static int convert_prange(long val, long min, long max)
+{
+ long range = max - min;
+ int tmp;
+
+ if (range == 0)
+ return 0;
+ val -= min;
+ tmp = rint((double)val/(double)range * 100);
+ return tmp;
+}
+
+/* Function to convert from percentage to volume. val = percentage */
+
+#define convert_prange1(val, min, max) \
+ ceil((val) * ((max) - (min)) * 0.01 + (min))
+
+struct volume_ops {
+ int (*get_range)(snd_mixer_elem_t *elem, long *min, long *max);
+ int (*get)(snd_mixer_elem_t *elem, snd_mixer_selem_channel_id_t c,
+ long *value);
+ int (*set)(snd_mixer_elem_t *elem, snd_mixer_selem_channel_id_t c,
+ long value, int dir);
+};
+
+enum { VOL_RAW, VOL_DB, VOL_MAP };
+
+struct volume_ops_set {
+ int (*has_volume)(snd_mixer_elem_t *elem);
+ struct volume_ops v[3];
+};
+
+static int set_playback_dB(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c, long value, int dir)
+{
+ return snd_mixer_selem_set_playback_dB(elem, c, value, dir);
+}
+
+static int set_capture_dB(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c, long value, int dir)
+{
+ return snd_mixer_selem_set_capture_dB(elem, c, value, dir);
+}
+
+static int set_playback_raw_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c,
+ long value, int dir)
+{
+ return snd_mixer_selem_set_playback_volume(elem, c, value);
+}
+
+static int set_capture_raw_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c,
+ long value, int dir)
+{
+ return snd_mixer_selem_set_capture_volume(elem, c, value);
+}
+
+/* FIXME: normalize to int32 space to be compatible with other types */
+#define MAP_VOL_RES (INT32_MAX / 100)
+
+static int get_mapped_volume_range(snd_mixer_elem_t *elem,
+ long *pmin, long *pmax)
+{
+ *pmin = 0;
+ *pmax = MAP_VOL_RES;
+ return 0;
+}
+
+static int get_playback_mapped_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c,
+ long *value)
+{
+ *value = (rint)(get_normalized_playback_volume(elem, c) * MAP_VOL_RES);
+ return 0;
+}
+
+static int set_playback_mapped_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c,
+ long value, int dir)
+{
+ return set_normalized_playback_volume(elem, c,
+ (double)value / MAP_VOL_RES, dir);
+}
+
+static int get_capture_mapped_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c,
+ long *value)
+{
+ *value = (rint)(get_normalized_capture_volume(elem, c) * MAP_VOL_RES);
+ return 0;
+}
+
+static int set_capture_mapped_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t c,
+ long value, int dir)
+{
+ return set_normalized_capture_volume(elem, c,
+ (double)value / MAP_VOL_RES, dir);
+}
+
+static const struct volume_ops_set vol_ops[2] = {
+ {
+ .has_volume = snd_mixer_selem_has_playback_volume,
+ .v = {{ snd_mixer_selem_get_playback_volume_range,
+ snd_mixer_selem_get_playback_volume,
+ set_playback_raw_volume },
+ { snd_mixer_selem_get_playback_dB_range,
+ snd_mixer_selem_get_playback_dB,
+ set_playback_dB },
+ { get_mapped_volume_range,
+ get_playback_mapped_volume,
+ set_playback_mapped_volume },
+ },
+ },
+ {
+ .has_volume = snd_mixer_selem_has_capture_volume,
+ .v = {{ snd_mixer_selem_get_capture_volume_range,
+ snd_mixer_selem_get_capture_volume,
+ set_capture_raw_volume },
+ { snd_mixer_selem_get_capture_dB_range,
+ snd_mixer_selem_get_capture_dB,
+ set_capture_dB },
+ { get_mapped_volume_range,
+ get_capture_mapped_volume,
+ set_capture_mapped_volume },
+ },
+ },
+};
+
+static int std_vol_type = VOL_RAW;
+
+static int set_volume_simple(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t chn,
+ char **ptr, int dir)
+{
+ long val, orig, pmin, pmax;
+ char *p = *ptr, *s;
+ int invalid = 0, percent = 0, err = 0;
+ int vol_type = std_vol_type;
+ double scale = 1.0;
+ int correct = 0;
+
+ if (! vol_ops[dir].has_volume(elem))
+ invalid = 1;
+
+ if (*p == ':')
+ p++;
+ if (*p == '\0' || (!isdigit(*p) && *p != '-'))
+ goto skip;
+
+ s = p;
+ val = strtol(s, &p, 10);
+ if (*p == '.') {
+ p++;
+ strtol(p, &p, 10);
+ }
+ if (*p == '%') {
+ percent = 1;
+ p++;
+ } else if (p[0] == 'd' && p[1] == 'B') {
+ vol_type = VOL_DB;
+ p += 2;
+ scale = 100;
+ } else
+ vol_type = VOL_RAW;
+
+ val = (long)(strtod(s, NULL) * scale);
+ if (vol_ops[dir].v[vol_type].get_range(elem, &pmin, &pmax) < 0)
+ invalid = 1;
+ if (percent)
+ val = (long)convert_prange1(val, pmin, pmax);
+ if (*p == '+' || *p == '-') {
+ if (! invalid) {
+ if (vol_ops[dir].v[vol_type].get(elem, chn, &orig) < 0)
+ invalid = 1;
+ if (*p == '+') {
+ val = orig + val;
+ correct = 1;
+ } else {
+ val = orig - val;
+ correct = -1;
+ }
+ }
+ p++;
+ }
+ if (! invalid) {
+ val = check_range(val, pmin, pmax);
+ err = vol_ops[dir].v[vol_type].set(elem, chn, val, correct);
+ }
+ skip:
+ if (*p == ',')
+ p++;
+ *ptr = p;
+ return err ? err : (invalid ? -ENOENT : 0);
+}
+
+static int get_bool_simple(char **ptr, char *str, int invert, int orig)
+{
+ if (**ptr == ':')
+ (*ptr)++;
+ if (!strncasecmp(*ptr, str, strlen(str))) {
+ orig = 1 ^ (invert ? 1 : 0);
+ while (**ptr != '\0' && **ptr != ',' && **ptr != ':')
+ (*ptr)++;
+ }
+ if (**ptr == ',' || **ptr == ':')
+ (*ptr)++;
+ return orig;
+}
+
+static int simple_skip_word(char **ptr, char *str)
+{
+ char *xptr = *ptr;
+ if (*xptr == ':')
+ xptr++;
+ if (!strncasecmp(xptr, str, strlen(str))) {
+ while (*xptr != '\0' && *xptr != ',' && *xptr != ':')
+ xptr++;
+ if (*xptr == ',' || *xptr == ':')
+ xptr++;
+ *ptr = xptr;
+ return 1;
+ }
+ return 0;
+}
+
+static void show_control_id(snd_ctl_elem_id_t *id)
+{
+ char *str;
+
+ str = snd_ctl_ascii_elem_id_get(id);
+ if (str)
+ printf("%s", str);
+ free(str);
+}
+
+static void print_spaces(unsigned int spaces)
+{
+ while (spaces-- > 0)
+ putc(' ', stdout);
+}
+
+static void print_dB(long dB)
+{
+ if (dB < 0) {
+ printf("-%li.%02lidB", -dB / 100, -dB % 100);
+ } else {
+ printf("%li.%02lidB", dB / 100, dB % 100);
+ }
+}
+
+static void decode_tlv(unsigned int spaces, unsigned int *tlv, unsigned int tlv_size)
+{
+ unsigned int type = tlv[0];
+ unsigned int size;
+ unsigned int idx = 0;
+ const char *chmap_type = NULL;
+
+ if (tlv_size < 2 * sizeof(unsigned int)) {
+ printf("TLV size error!\n");
+ return;
+ }
+ print_spaces(spaces);
+ printf("| ");
+ type = tlv[idx++];
+ size = tlv[idx++];
+ tlv_size -= 2 * sizeof(unsigned int);
+ if (size > tlv_size) {
+ printf("TLV size error (%i, %i, %i)!\n", type, size, tlv_size);
+ return;
+ }
+ switch (type) {
+ case SND_CTL_TLVT_CONTAINER:
+ size += sizeof(unsigned int) -1;
+ size /= sizeof(unsigned int);
+ while (idx < size) {
+ if (tlv[idx+1] > (size - idx) * sizeof(unsigned int)) {
+ printf("TLV size error in compound!\n");
+ return;
+ }
+ decode_tlv(spaces + 2, tlv + idx, tlv[idx+1] + 8);
+ idx += 2 + (tlv[1] + sizeof(unsigned int) - 1) / sizeof(unsigned int);
+ }
+ break;
+ case SND_CTL_TLVT_DB_SCALE:
+ printf("dBscale-");
+ if (size != 2 * sizeof(unsigned int)) {
+ while (size > 0) {
+ printf("0x%08x,", tlv[idx++]);
+ size -= sizeof(unsigned int);
+ }
+ } else {
+ printf("min=");
+ print_dB((int)tlv[2]);
+ printf(",step=");
+ print_dB(tlv[3] & 0xffff);
+ printf(",mute=%i", (tlv[3] >> 16) & 1);
+ }
+ break;
+#ifdef SND_CTL_TLVT_DB_LINEAR
+ case SND_CTL_TLVT_DB_LINEAR:
+ printf("dBlinear-");
+ if (size != 2 * sizeof(unsigned int)) {
+ while (size > 0) {
+ printf("0x%08x,", tlv[idx++]);
+ size -= sizeof(unsigned int);
+ }
+ } else {
+ printf("min=");
+ print_dB((int)tlv[2]);
+ printf(",max=");
+ print_dB((int)tlv[3]);
+ }
+ break;
+#endif
+#ifdef SND_CTL_TLVT_DB_RANGE
+ case SND_CTL_TLVT_DB_RANGE:
+ printf("dBrange-\n");
+ if ((size % (6 * sizeof(unsigned int))) != 0) {
+ while (size > 0) {
+ printf("0x%08x,", tlv[idx++]);
+ size -= sizeof(unsigned int);
+ }
+ break;
+ }
+ while (size > 0) {
+ print_spaces(spaces + 2);
+ printf("rangemin=%i,", tlv[idx++]);
+ printf(",rangemax=%i\n", tlv[idx++]);
+ decode_tlv(spaces + 4, tlv + idx, 4 * sizeof(unsigned int));
+ idx += 4;
+ size -= 6 * sizeof(unsigned int);
+ }
+ break;
+#endif
+#ifdef SND_CTL_TLVT_DB_MINMAX
+ case SND_CTL_TLVT_DB_MINMAX:
+ case SND_CTL_TLVT_DB_MINMAX_MUTE:
+ if (type == SND_CTL_TLVT_DB_MINMAX_MUTE)
+ printf("dBminmaxmute-");
+ else
+ printf("dBminmax-");
+ if (size != 2 * sizeof(unsigned int)) {
+ while (size > 0) {
+ printf("0x%08x,", tlv[idx++]);
+ size -= sizeof(unsigned int);
+ }
+ } else {
+ printf("min=");
+ print_dB((int)tlv[2]);
+ printf(",max=");
+ print_dB((int)tlv[3]);
+ }
+ break;
+#endif
+#ifdef SND_CTL_TLVT_CHMAP_FIXED
+ case SND_CTL_TLVT_CHMAP_FIXED:
+ chmap_type = "fixed";
+ /* Fall through */
+ case SND_CTL_TLVT_CHMAP_VAR:
+ if (!chmap_type)
+ chmap_type = "variable";
+ /* Fall through */
+ case SND_CTL_TLVT_CHMAP_PAIRED:
+ if (!chmap_type)
+ chmap_type = "paired";
+ printf("chmap-%s=", chmap_type);
+
+ while (size > 0) {
+ printf("%s", snd_pcm_chmap_name(tlv[idx++]));
+ size -= sizeof(unsigned int);
+ if (size > 0)
+ printf(",");
+ }
+ break;
+#endif
+ default:
+ printf("unk-%i-", type);
+ while (size > 0) {
+ printf("0x%08x,", tlv[idx++]);
+ size -= sizeof(unsigned int);
+ }
+ break;
+ }
+ putc('\n', stdout);
+}
+
+static int show_control(const char *space, snd_hctl_elem_t *elem,
+ int level)
+{
+ int err;
+ unsigned int item, idx, count, *tlv;
+ snd_ctl_elem_type_t type;
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_info_t *info;
+ snd_ctl_elem_value_t *control;
+ snd_aes_iec958_t iec958;
+ snd_ctl_elem_id_alloca(&id);
+ snd_ctl_elem_info_alloca(&info);
+ snd_ctl_elem_value_alloca(&control);
+ if ((err = snd_hctl_elem_info(elem, info)) < 0) {
+ error("Control %s snd_hctl_elem_info error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ if (level & LEVEL_ID) {
+ snd_hctl_elem_get_id(elem, id);
+ show_control_id(id);
+ printf("\n");
+ }
+ count = snd_ctl_elem_info_get_count(info);
+ type = snd_ctl_elem_info_get_type(info);
+ printf("%s; type=%s,access=%s,values=%i", space, control_type(info), control_access(info), count);
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ printf(",min=%li,max=%li,step=%li\n",
+ snd_ctl_elem_info_get_min(info),
+ snd_ctl_elem_info_get_max(info),
+ snd_ctl_elem_info_get_step(info));
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ printf(",min=%Li,max=%Li,step=%Li\n",
+ snd_ctl_elem_info_get_min64(info),
+ snd_ctl_elem_info_get_max64(info),
+ snd_ctl_elem_info_get_step64(info));
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ {
+ unsigned int items = snd_ctl_elem_info_get_items(info);
+ printf(",items=%u\n", items);
+ for (item = 0; item < items; item++) {
+ snd_ctl_elem_info_set_item(info, item);
+ if ((err = snd_hctl_elem_info(elem, info)) < 0) {
+ error("Control %s element info error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ printf("%s; Item #%u '%s'\n", space, item, snd_ctl_elem_info_get_item_name(info));
+ }
+ break;
+ }
+ default:
+ printf("\n");
+ break;
+ }
+ if (level & LEVEL_BASIC) {
+ if (!snd_ctl_elem_info_is_readable(info))
+ goto __skip_read;
+ if ((err = snd_hctl_elem_read(elem, control)) < 0) {
+ error("Control %s element read error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ printf("%s: values=", space);
+ for (idx = 0; idx < count; idx++) {
+ if (idx > 0)
+ printf(",");
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ printf("%s", snd_ctl_elem_value_get_boolean(control, idx) ? "on" : "off");
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ printf("%li", snd_ctl_elem_value_get_integer(control, idx));
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ printf("%Li", snd_ctl_elem_value_get_integer64(control, idx));
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ printf("%u", snd_ctl_elem_value_get_enumerated(control, idx));
+ break;
+ case SND_CTL_ELEM_TYPE_BYTES:
+ printf("0x%02x", snd_ctl_elem_value_get_byte(control, idx));
+ break;
+ case SND_CTL_ELEM_TYPE_IEC958:
+ snd_ctl_elem_value_get_iec958(control, &iec958);
+ printf("[AES0=0x%02x AES1=0x%02x AES2=0x%02x AES3=0x%02x]",
+ iec958.status[0], iec958.status[1],
+ iec958.status[2], iec958.status[3]);
+ break;
+ default:
+ printf("?");
+ break;
+ }
+ }
+ printf("\n");
+ __skip_read:
+ if (!snd_ctl_elem_info_is_tlv_readable(info))
+ goto __skip_tlv;
+ tlv = malloc(4096);
+ if ((err = snd_hctl_elem_tlv_read(elem, tlv, 4096)) < 0) {
+ error("Control %s element TLV read error: %s\n", card, snd_strerror(err));
+ free(tlv);
+ return err;
+ }
+ decode_tlv(strlen(space), tlv, 4096);
+ free(tlv);
+ }
+ __skip_tlv:
+ return 0;
+}
+
+static int controls(int level)
+{
+ int err;
+ snd_hctl_t *handle;
+ snd_hctl_elem_t *elem;
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_info_t *info;
+ snd_ctl_elem_id_alloca(&id);
+ snd_ctl_elem_info_alloca(&info);
+
+ if ((err = snd_hctl_open(&handle, card, 0)) < 0) {
+ error("Control %s open error: %s", card, snd_strerror(err));
+ return err;
+ }
+ if ((err = snd_hctl_load(handle)) < 0) {
+ error("Control %s local error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ for (elem = snd_hctl_first_elem(handle); elem; elem = snd_hctl_elem_next(elem)) {
+ if ((err = snd_hctl_elem_info(elem, info)) < 0) {
+ error("Control %s snd_hctl_elem_info error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ if (!(level & LEVEL_INACTIVE) && snd_ctl_elem_info_is_inactive(info))
+ continue;
+ snd_hctl_elem_get_id(elem, id);
+ show_control_id(id);
+ printf("\n");
+ if (level & LEVEL_BASIC)
+ show_control(" ", elem, 1);
+ }
+ snd_hctl_close(handle);
+ return 0;
+}
+
+static void show_selem_volume(snd_mixer_elem_t *elem,
+ snd_mixer_selem_channel_id_t chn, int dir,
+ long min, long max)
+{
+ long raw, val;
+ vol_ops[dir].v[VOL_RAW].get(elem, chn, &raw);
+ if (std_vol_type == VOL_RAW)
+ val = convert_prange(raw, min, max);
+ else {
+ vol_ops[dir].v[std_vol_type].get(elem, chn, &val);
+ val = convert_prange(val, 0, MAP_VOL_RES);
+ }
+ printf(" %li [%li%%]", raw, val);
+ if (!vol_ops[dir].v[VOL_DB].get(elem, chn, &val)) {
+ printf(" [");
+ print_dB(val);
+ printf("]");
+ }
+}
+
+static int show_selem(snd_mixer_t *handle, snd_mixer_selem_id_t *id, const char *space, int level)
+{
+ snd_mixer_selem_channel_id_t chn;
+ long pmin = 0, pmax = 0;
+ long cmin = 0, cmax = 0;
+ int psw, csw;
+ int pmono, cmono, mono_ok = 0;
+ snd_mixer_elem_t *elem;
+
+ elem = snd_mixer_find_selem(handle, id);
+ if (!elem) {
+ error("Mixer %s simple element not found", card);
+ return -ENOENT;
+ }
+
+ if (level & LEVEL_BASIC) {
+ printf("%sCapabilities:", space);
+ if (snd_mixer_selem_has_common_volume(elem)) {
+ printf(" volume");
+ if (snd_mixer_selem_has_playback_volume_joined(elem))
+ printf(" volume-joined");
+ } else {
+ if (snd_mixer_selem_has_playback_volume(elem)) {
+ printf(" pvolume");
+ if (snd_mixer_selem_has_playback_volume_joined(elem))
+ printf(" pvolume-joined");
+ }
+ if (snd_mixer_selem_has_capture_volume(elem)) {
+ printf(" cvolume");
+ if (snd_mixer_selem_has_capture_volume_joined(elem))
+ printf(" cvolume-joined");
+ }
+ }
+ if (snd_mixer_selem_has_common_switch(elem)) {
+ printf(" switch");
+ if (snd_mixer_selem_has_playback_switch_joined(elem))
+ printf(" switch-joined");
+ } else {
+ if (snd_mixer_selem_has_playback_switch(elem)) {
+ printf(" pswitch");
+ if (snd_mixer_selem_has_playback_switch_joined(elem))
+ printf(" pswitch-joined");
+ }
+ if (snd_mixer_selem_has_capture_switch(elem)) {
+ printf(" cswitch");
+ if (snd_mixer_selem_has_capture_switch_joined(elem))
+ printf(" cswitch-joined");
+ if (snd_mixer_selem_has_capture_switch_exclusive(elem))
+ printf(" cswitch-exclusive");
+ }
+ }
+ if (snd_mixer_selem_is_enum_playback(elem)) {
+ printf(" penum");
+ } else if (snd_mixer_selem_is_enum_capture(elem)) {
+ printf(" cenum");
+ } else if (snd_mixer_selem_is_enumerated(elem)) {
+ printf(" enum");
+ }
+ printf("\n");
+ if (snd_mixer_selem_is_enumerated(elem)) {
+ int i, items;
+ unsigned int idx;
+ char itemname[40];
+ items = snd_mixer_selem_get_enum_items(elem);
+ printf(" Items:");
+ for (i = 0; i < items; i++) {
+ snd_mixer_selem_get_enum_item_name(elem, i, sizeof(itemname) - 1, itemname);
+ printf(" '%s'", itemname);
+ }
+ printf("\n");
+ for (i = 0; !snd_mixer_selem_get_enum_item(elem, i, &idx); i++) {
+ snd_mixer_selem_get_enum_item_name(elem, idx, sizeof(itemname) - 1, itemname);
+ printf(" Item%d: '%s'\n", i, itemname);
+ }
+ return 0; /* no more thing to do */
+ }
+ if (snd_mixer_selem_has_capture_switch_exclusive(elem))
+ printf("%sCapture exclusive group: %i\n", space,
+ snd_mixer_selem_get_capture_group(elem));
+ if (snd_mixer_selem_has_playback_volume(elem) ||
+ snd_mixer_selem_has_playback_switch(elem)) {
+ printf("%sPlayback channels:", space);
+ if (snd_mixer_selem_is_playback_mono(elem)) {
+ printf(" Mono");
+ } else {
+ int first = 1;
+ for (chn = 0; chn <= SND_MIXER_SCHN_LAST; chn++){
+ if (!snd_mixer_selem_has_playback_channel(elem, chn))
+ continue;
+ if (!first)
+ printf(" -");
+ printf(" %s", snd_mixer_selem_channel_name(chn));
+ first = 0;
+ }
+ }
+ printf("\n");
+ }
+ if (snd_mixer_selem_has_capture_volume(elem) ||
+ snd_mixer_selem_has_capture_switch(elem)) {
+ printf("%sCapture channels:", space);
+ if (snd_mixer_selem_is_capture_mono(elem)) {
+ printf(" Mono");
+ } else {
+ int first = 1;
+ for (chn = 0; chn <= SND_MIXER_SCHN_LAST; chn++){
+ if (!snd_mixer_selem_has_capture_channel(elem, chn))
+ continue;
+ if (!first)
+ printf(" -");
+ printf(" %s", snd_mixer_selem_channel_name(chn));
+ first = 0;
+ }
+ }
+ printf("\n");
+ }
+ if (snd_mixer_selem_has_playback_volume(elem) ||
+ snd_mixer_selem_has_capture_volume(elem)) {
+ printf("%sLimits:", space);
+ if (snd_mixer_selem_has_common_volume(elem)) {
+ snd_mixer_selem_get_playback_volume_range(elem, &pmin, &pmax);
+ snd_mixer_selem_get_capture_volume_range(elem, &cmin, &cmax);
+ printf(" %li - %li", pmin, pmax);
+ } else {
+ if (snd_mixer_selem_has_playback_volume(elem)) {
+ snd_mixer_selem_get_playback_volume_range(elem, &pmin, &pmax);
+ printf(" Playback %li - %li", pmin, pmax);
+ }
+ if (snd_mixer_selem_has_capture_volume(elem)) {
+ snd_mixer_selem_get_capture_volume_range(elem, &cmin, &cmax);
+ printf(" Capture %li - %li", cmin, cmax);
+ }
+ }
+ printf("\n");
+ }
+ pmono = snd_mixer_selem_has_playback_channel(elem, SND_MIXER_SCHN_MONO) &&
+ (snd_mixer_selem_is_playback_mono(elem) ||
+ (!snd_mixer_selem_has_playback_volume(elem) &&
+ !snd_mixer_selem_has_playback_switch(elem)));
+ cmono = snd_mixer_selem_has_capture_channel(elem, SND_MIXER_SCHN_MONO) &&
+ (snd_mixer_selem_is_capture_mono(elem) ||
+ (!snd_mixer_selem_has_capture_volume(elem) &&
+ !snd_mixer_selem_has_capture_switch(elem)));
+#if 0
+ printf("pmono = %i, cmono = %i (%i, %i, %i, %i)\n", pmono, cmono,
+ snd_mixer_selem_has_capture_channel(elem, SND_MIXER_SCHN_MONO),
+ snd_mixer_selem_is_capture_mono(elem),
+ snd_mixer_selem_has_capture_volume(elem),
+ snd_mixer_selem_has_capture_switch(elem));
+#endif
+ if (pmono || cmono) {
+ if (!mono_ok) {
+ printf("%s%s:", space, "Mono");
+ mono_ok = 1;
+ }
+ if (snd_mixer_selem_has_common_volume(elem)) {
+ show_selem_volume(elem, SND_MIXER_SCHN_MONO, 0, pmin, pmax);
+ }
+ if (snd_mixer_selem_has_common_switch(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, SND_MIXER_SCHN_MONO, &psw);
+ printf(" [%s]", psw ? "on" : "off");
+ }
+ }
+ if (pmono && snd_mixer_selem_has_playback_channel(elem, SND_MIXER_SCHN_MONO)) {
+ int title = 0;
+ if (!mono_ok) {
+ printf("%s%s:", space, "Mono");
+ mono_ok = 1;
+ }
+ if (!snd_mixer_selem_has_common_volume(elem)) {
+ if (snd_mixer_selem_has_playback_volume(elem)) {
+ printf(" Playback");
+ title = 1;
+ show_selem_volume(elem, SND_MIXER_SCHN_MONO, 0, pmin, pmax);
+ }
+ }
+ if (!snd_mixer_selem_has_common_switch(elem)) {
+ if (snd_mixer_selem_has_playback_switch(elem)) {
+ if (!title)
+ printf(" Playback");
+ snd_mixer_selem_get_playback_switch(elem, SND_MIXER_SCHN_MONO, &psw);
+ printf(" [%s]", psw ? "on" : "off");
+ }
+ }
+ }
+ if (cmono && snd_mixer_selem_has_capture_channel(elem, SND_MIXER_SCHN_MONO)) {
+ int title = 0;
+ if (!mono_ok) {
+ printf("%s%s:", space, "Mono");
+ mono_ok = 1;
+ }
+ if (!snd_mixer_selem_has_common_volume(elem)) {
+ if (snd_mixer_selem_has_capture_volume(elem)) {
+ printf(" Capture");
+ title = 1;
+ show_selem_volume(elem, SND_MIXER_SCHN_MONO, 1, cmin, cmax);
+ }
+ }
+ if (!snd_mixer_selem_has_common_switch(elem)) {
+ if (snd_mixer_selem_has_capture_switch(elem)) {
+ if (!title)
+ printf(" Capture");
+ snd_mixer_selem_get_capture_switch(elem, SND_MIXER_SCHN_MONO, &csw);
+ printf(" [%s]", csw ? "on" : "off");
+ }
+ }
+ }
+ if (pmono || cmono)
+ printf("\n");
+ if (!pmono || !cmono) {
+ for (chn = 0; chn <= SND_MIXER_SCHN_LAST; chn++) {
+ if ((pmono || !snd_mixer_selem_has_playback_channel(elem, chn)) &&
+ (cmono || !snd_mixer_selem_has_capture_channel(elem, chn)))
+ continue;
+ printf("%s%s:", space, snd_mixer_selem_channel_name(chn));
+ if (!pmono && !cmono && snd_mixer_selem_has_common_volume(elem)) {
+ show_selem_volume(elem, chn, 0, pmin, pmax);
+ }
+ if (!pmono && !cmono && snd_mixer_selem_has_common_switch(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, chn, &psw);
+ printf(" [%s]", psw ? "on" : "off");
+ }
+ if (!pmono && snd_mixer_selem_has_playback_channel(elem, chn)) {
+ int title = 0;
+ if (!snd_mixer_selem_has_common_volume(elem)) {
+ if (snd_mixer_selem_has_playback_volume(elem)) {
+ printf(" Playback");
+ title = 1;
+ show_selem_volume(elem, chn, 0, pmin, pmax);
+ }
+ }
+ if (!snd_mixer_selem_has_common_switch(elem)) {
+ if (snd_mixer_selem_has_playback_switch(elem)) {
+ if (!title)
+ printf(" Playback");
+ snd_mixer_selem_get_playback_switch(elem, chn, &psw);
+ printf(" [%s]", psw ? "on" : "off");
+ }
+ }
+ }
+ if (!cmono && snd_mixer_selem_has_capture_channel(elem, chn)) {
+ int title = 0;
+ if (!snd_mixer_selem_has_common_volume(elem)) {
+ if (snd_mixer_selem_has_capture_volume(elem)) {
+ printf(" Capture");
+ title = 1;
+ show_selem_volume(elem, chn, 1, cmin, cmax);
+ }
+ }
+ if (!snd_mixer_selem_has_common_switch(elem)) {
+ if (snd_mixer_selem_has_capture_switch(elem)) {
+ if (!title)
+ printf(" Capture");
+ snd_mixer_selem_get_capture_switch(elem, chn, &csw);
+ printf(" [%s]", csw ? "on" : "off");
+ }
+ }
+ }
+ printf("\n");
+ }
+ }
+ }
+ return 0;
+}
+
+static int selems(int level)
+{
+ int err;
+ snd_mixer_t *handle;
+ snd_mixer_selem_id_t *sid;
+ snd_mixer_elem_t *elem;
+ snd_mixer_selem_id_alloca(&sid);
+
+ if ((err = snd_mixer_open(&handle, 0)) < 0) {
+ error("Mixer %s open error: %s", card, snd_strerror(err));
+ return err;
+ }
+ if (smixer_level == 0 && (err = snd_mixer_attach(handle, card)) < 0) {
+ error("Mixer attach %s error: %s", card, snd_strerror(err));
+ snd_mixer_close(handle);
+ return err;
+ }
+ if ((err = snd_mixer_selem_register(handle, smixer_level > 0 ? &smixer_options : NULL, NULL)) < 0) {
+ error("Mixer register error: %s", snd_strerror(err));
+ snd_mixer_close(handle);
+ return err;
+ }
+ err = snd_mixer_load(handle);
+ if (err < 0) {
+ error("Mixer %s load error: %s", card, snd_strerror(err));
+ snd_mixer_close(handle);
+ return err;
+ }
+ for (elem = snd_mixer_first_elem(handle); elem; elem = snd_mixer_elem_next(elem)) {
+ snd_mixer_selem_get_id(elem, sid);
+ if (!(level & LEVEL_INACTIVE) && !snd_mixer_selem_is_active(elem))
+ continue;
+ printf("Simple mixer control '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+ show_selem(handle, sid, " ", level);
+ }
+ snd_mixer_close(handle);
+ return 0;
+}
+
+static int parse_simple_id(const char *str, snd_mixer_selem_id_t *sid)
+{
+ int c, size;
+ char buf[128];
+ char *ptr = buf;
+
+ while (*str == ' ' || *str == '\t')
+ str++;
+ if (!(*str))
+ return -EINVAL;
+ size = 1; /* for '\0' */
+ if (*str != '"' && *str != '\'') {
+ while (*str && *str != ',') {
+ if (size < (int)sizeof(buf)) {
+ *ptr++ = *str;
+ size++;
+ }
+ str++;
+ }
+ } else {
+ c = *str++;
+ while (*str && *str != c) {
+ if (size < (int)sizeof(buf)) {
+ *ptr++ = *str;
+ size++;
+ }
+ str++;
+ }
+ if (*str == c)
+ str++;
+ }
+ if (*str == '\0') {
+ snd_mixer_selem_id_set_index(sid, 0);
+ *ptr = 0;
+ goto _set;
+ }
+ if (*str != ',')
+ return -EINVAL;
+ *ptr = 0; /* terminate the string */
+ str++;
+ if (!isdigit(*str))
+ return -EINVAL;
+ snd_mixer_selem_id_set_index(sid, atoi(str));
+ _set:
+ snd_mixer_selem_id_set_name(sid, buf);
+ return 0;
+}
+
+static int cset(int argc, char *argv[], int roflag, int keep_handle)
+{
+ int err;
+ static snd_ctl_t *handle = NULL;
+ snd_ctl_elem_info_t *info;
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_value_t *control;
+ snd_ctl_elem_info_alloca(&info);
+ snd_ctl_elem_id_alloca(&id);
+ snd_ctl_elem_value_alloca(&control);
+
+ if (argc < 1) {
+ fprintf(stderr, "Specify a full control identifier: [[iface=<iface>,][name='name',][index=<index>,][device=<device>,][subdevice=<subdevice>]]|[numid=<numid>]\n");
+ return -EINVAL;
+ }
+ if (snd_ctl_ascii_elem_id_parse(id, argv[0])) {
+ fprintf(stderr, "Wrong control identifier: %s\n", argv[0]);
+ return -EINVAL;
+ }
+ if (debugflag) {
+ printf("VERIFY ID: ");
+ show_control_id(id);
+ printf("\n");
+ }
+ if (handle == NULL &&
+ (err = snd_ctl_open(&handle, card, 0)) < 0) {
+ error("Control %s open error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ snd_ctl_elem_info_set_id(info, id);
+ if ((err = snd_ctl_elem_info(handle, info)) < 0) {
+ if (ignore_error)
+ return 0;
+ error("Cannot find the given element from control %s\n", card);
+ if (! keep_handle) {
+ snd_ctl_close(handle);
+ handle = NULL;
+ }
+ return err;
+ }
+ snd_ctl_elem_info_get_id(info, id); /* FIXME: Remove it when hctl find works ok !!! */
+ if (!roflag) {
+ snd_ctl_elem_value_set_id(control, id);
+ if ((err = snd_ctl_elem_read(handle, control)) < 0) {
+ if (ignore_error)
+ return 0;
+ error("Cannot read the given element from control %s\n", card);
+ if (! keep_handle) {
+ snd_ctl_close(handle);
+ handle = NULL;
+ }
+ return err;
+ }
+ err = snd_ctl_ascii_value_parse(handle, control, info, argv[1]);
+ if (err < 0) {
+ if (!ignore_error)
+ error("Control %s parse error: %s\n", card, snd_strerror(err));
+ if (!keep_handle) {
+ snd_ctl_close(handle);
+ handle = NULL;
+ }
+ return ignore_error ? 0 : err;
+ }
+ if ((err = snd_ctl_elem_write(handle, control)) < 0) {
+ if (!ignore_error)
+ error("Control %s element write error: %s\n", card, snd_strerror(err));
+ if (!keep_handle) {
+ snd_ctl_close(handle);
+ handle = NULL;
+ }
+ return ignore_error ? 0 : err;
+ }
+ }
+ if (! keep_handle) {
+ snd_ctl_close(handle);
+ handle = NULL;
+ }
+ if (!quiet) {
+ snd_hctl_t *hctl;
+ snd_hctl_elem_t *elem;
+ if ((err = snd_hctl_open(&hctl, card, 0)) < 0) {
+ error("Control %s open error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ if ((err = snd_hctl_load(hctl)) < 0) {
+ error("Control %s load error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ elem = snd_hctl_find_elem(hctl, id);
+ if (elem)
+ show_control(" ", elem, LEVEL_BASIC | LEVEL_ID);
+ else
+ printf("Could not find the specified element\n");
+ snd_hctl_close(hctl);
+ }
+ return 0;
+}
+
+typedef struct channel_mask {
+ char *name;
+ unsigned int mask;
+} channel_mask_t;
+static const channel_mask_t chanmask[] = {
+ {"frontleft", 1 << SND_MIXER_SCHN_FRONT_LEFT},
+ {"frontright", 1 << SND_MIXER_SCHN_FRONT_RIGHT},
+ {"frontcenter", 1 << SND_MIXER_SCHN_FRONT_CENTER},
+ {"front", ((1 << SND_MIXER_SCHN_FRONT_LEFT) |
+ (1 << SND_MIXER_SCHN_FRONT_RIGHT))},
+ {"center", 1 << SND_MIXER_SCHN_FRONT_CENTER},
+ {"rearleft", 1 << SND_MIXER_SCHN_REAR_LEFT},
+ {"rearright", 1 << SND_MIXER_SCHN_REAR_RIGHT},
+ {"rear", ((1 << SND_MIXER_SCHN_REAR_LEFT) |
+ (1 << SND_MIXER_SCHN_REAR_RIGHT))},
+ {"woofer", 1 << SND_MIXER_SCHN_WOOFER},
+ {NULL, 0}
+};
+
+static unsigned int channels_mask(char **arg, unsigned int def)
+{
+ const channel_mask_t *c;
+
+ for (c = chanmask; c->name; c++) {
+ if (strncasecmp(*arg, c->name, strlen(c->name)) == 0) {
+ while (**arg != '\0' && **arg != ',' && **arg != ' ' && **arg != '\t')
+ (*arg)++;
+ if (**arg == ',' || **arg == ' ' || **arg == '\t')
+ (*arg)++;
+ return c->mask;
+ }
+ }
+ return def;
+}
+
+static unsigned int dir_mask(char **arg, unsigned int def)
+{
+ int findend = 0;
+
+ if (strncasecmp(*arg, "playback", 8) == 0)
+ def = findend = 1;
+ else if (strncasecmp(*arg, "capture", 8) == 0)
+ def = findend = 2;
+ if (findend) {
+ while (**arg != '\0' && **arg != ',' && **arg != ' ' && **arg != '\t')
+ (*arg)++;
+ if (**arg == ',' || **arg == ' ' || **arg == '\t')
+ (*arg)++;
+ }
+ return def;
+}
+
+static int get_enum_item_index(snd_mixer_elem_t *elem, char **ptrp)
+{
+ char *ptr = *ptrp;
+ int items, i, len;
+ char name[40];
+
+ items = snd_mixer_selem_get_enum_items(elem);
+ if (items <= 0)
+ return -1;
+
+ for (i = 0; i < items; i++) {
+ if (snd_mixer_selem_get_enum_item_name(elem, i, sizeof(name)-1, name) < 0)
+ continue;
+ len = strlen(name);
+ if (! strncmp(name, ptr, len)) {
+ if (! ptr[len] || ptr[len] == ',' || ptr[len] == '\n') {
+ ptr += len;
+ *ptrp = ptr;
+ return i;
+ }
+ }
+ }
+ return -1;
+}
+
+static int sset_enum(snd_mixer_elem_t *elem, unsigned int argc, char **argv)
+{
+ unsigned int idx, chn = 0;
+ int check_flag = ignore_error ? 0 : -1;
+
+ for (idx = 1; idx < argc; idx++) {
+ char *ptr = argv[idx];
+ while (*ptr) {
+ int ival = get_enum_item_index(elem, &ptr);
+ if (ival < 0)
+ return check_flag;
+ if (snd_mixer_selem_set_enum_item(elem, chn, ival) >= 0)
+ check_flag = 1;
+ /* skip separators */
+ while (*ptr == ',' || isspace(*ptr))
+ ptr++;
+ }
+ }
+ return check_flag;
+}
+
+static int sset_channels(snd_mixer_elem_t *elem, unsigned int argc, char **argv)
+{
+ unsigned int channels = ~0U;
+ unsigned int dir = 3, okflag = 3;
+ unsigned int idx;
+ snd_mixer_selem_channel_id_t chn;
+ int check_flag = ignore_error ? 0 : -1;
+
+ for (idx = 1; idx < argc; idx++) {
+ char *ptr = argv[idx], *optr;
+ int multi, firstchn = 1;
+ channels = channels_mask(&ptr, channels);
+ if (*ptr == '\0')
+ continue;
+ dir = dir_mask(&ptr, dir);
+ if (*ptr == '\0')
+ continue;
+ multi = (strchr(ptr, ',') != NULL);
+ optr = ptr;
+ for (chn = 0; chn <= SND_MIXER_SCHN_LAST; chn++) {
+ char *sptr = NULL;
+ int ival;
+
+ if (!(channels & (1 << chn)))
+ continue;
+
+ if ((dir & 1) && snd_mixer_selem_has_playback_channel(elem, chn)) {
+ sptr = ptr;
+ if (!strncmp(ptr, "mute", 4) && snd_mixer_selem_has_playback_switch(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_playback_switch(elem, chn, get_bool_simple(&ptr, "mute", 1, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "off", 3) && snd_mixer_selem_has_playback_switch(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_playback_switch(elem, chn, get_bool_simple(&ptr, "off", 1, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "unmute", 6) && snd_mixer_selem_has_playback_switch(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_playback_switch(elem, chn, get_bool_simple(&ptr, "unmute", 0, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "on", 2) && snd_mixer_selem_has_playback_switch(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_playback_switch(elem, chn, get_bool_simple(&ptr, "on", 0, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "toggle", 6) && snd_mixer_selem_has_playback_switch(elem)) {
+ if (firstchn || !snd_mixer_selem_has_playback_switch_joined(elem)) {
+ snd_mixer_selem_get_playback_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_playback_switch(elem, chn, (ival ? 1 : 0) ^ 1) >= 0)
+ check_flag = 1;
+ }
+ simple_skip_word(&ptr, "toggle");
+ } else if (isdigit(*ptr) || *ptr == '-' || *ptr == '+') {
+ if (set_volume_simple(elem, chn, &ptr, 0) >= 0)
+ check_flag = 1;
+ } else if (simple_skip_word(&ptr, "cap") || simple_skip_word(&ptr, "rec") ||
+ simple_skip_word(&ptr, "nocap") || simple_skip_word(&ptr, "norec")) {
+ /* nothing */
+ } else {
+ okflag &= ~1;
+ }
+ }
+ if ((dir & 2) && snd_mixer_selem_has_capture_channel(elem, chn)) {
+ if (sptr != NULL)
+ ptr = sptr;
+ sptr = ptr;
+ if (!strncmp(ptr, "cap", 3) && snd_mixer_selem_has_capture_switch(elem)) {
+ snd_mixer_selem_get_capture_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_capture_switch(elem, chn, get_bool_simple(&ptr, "cap", 0, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "rec", 3) && snd_mixer_selem_has_capture_switch(elem)) {
+ snd_mixer_selem_get_capture_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_capture_switch(elem, chn, get_bool_simple(&ptr, "rec", 0, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "nocap", 5) && snd_mixer_selem_has_capture_switch(elem)) {
+ snd_mixer_selem_get_capture_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_capture_switch(elem, chn, get_bool_simple(&ptr, "nocap", 1, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "norec", 5) && snd_mixer_selem_has_capture_switch(elem)) {
+ snd_mixer_selem_get_capture_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_capture_switch(elem, chn, get_bool_simple(&ptr, "norec", 1, ival)) >= 0)
+ check_flag = 1;
+ } else if (!strncmp(ptr, "toggle", 6) && snd_mixer_selem_has_capture_switch(elem)) {
+ if (firstchn || !snd_mixer_selem_has_capture_switch_joined(elem)) {
+ snd_mixer_selem_get_capture_switch(elem, chn, &ival);
+ if (snd_mixer_selem_set_capture_switch(elem, chn, (ival ? 1 : 0) ^ 1) >= 0)
+ check_flag = 1;
+ }
+ simple_skip_word(&ptr, "toggle");
+ } else if (isdigit(*ptr) || *ptr == '-' || *ptr == '+') {
+ if (set_volume_simple(elem, chn, &ptr, 1) >= 0)
+ check_flag = 1;
+ } else if (simple_skip_word(&ptr, "mute") || simple_skip_word(&ptr, "off") ||
+ simple_skip_word(&ptr, "unmute") || simple_skip_word(&ptr, "on")) {
+ /* nothing */
+ } else {
+ okflag &= ~2;
+ }
+ }
+ if (okflag == 0) {
+ if (debugflag) {
+ if (dir & 1)
+ error("Unknown playback setup '%s'..", ptr);
+ if (dir & 2)
+ error("Unknown capture setup '%s'..", ptr);
+ }
+ return 0; /* just skip it */
+ }
+ if (!multi)
+ ptr = optr;
+ firstchn = 0;
+ }
+ }
+ return check_flag;
+}
+
+static int sset(unsigned int argc, char *argv[], int roflag, int keep_handle)
+{
+ int err = 0;
+ static snd_mixer_t *handle = NULL;
+ snd_mixer_elem_t *elem;
+ snd_mixer_selem_id_t *sid;
+ snd_mixer_selem_id_alloca(&sid);
+
+ if (argc < 1) {
+ fprintf(stderr, "Specify a scontrol identifier: 'name',index\n");
+ return 1;
+ }
+ if (parse_simple_id(argv[0], sid)) {
+ fprintf(stderr, "Wrong scontrol identifier: %s\n", argv[0]);
+ return 1;
+ }
+ if (!roflag && argc < 2) {
+ fprintf(stderr, "Specify what you want to set...\n");
+ return 1;
+ }
+ if (handle == NULL) {
+ if ((err = snd_mixer_open(&handle, 0)) < 0) {
+ error("Mixer %s open error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ if (smixer_level == 0 && (err = snd_mixer_attach(handle, card)) < 0) {
+ error("Mixer attach %s error: %s", card, snd_strerror(err));
+ snd_mixer_close(handle);
+ handle = NULL;
+ return err;
+ }
+ if ((err = snd_mixer_selem_register(handle, smixer_level > 0 ? &smixer_options : NULL, NULL)) < 0) {
+ error("Mixer register error: %s", snd_strerror(err));
+ snd_mixer_close(handle);
+ handle = NULL;
+ return err;
+ }
+ err = snd_mixer_load(handle);
+ if (err < 0) {
+ error("Mixer %s load error: %s", card, snd_strerror(err));
+ snd_mixer_close(handle);
+ handle = NULL;
+ return err;
+ }
+ }
+ elem = snd_mixer_find_selem(handle, sid);
+ if (!elem) {
+ if (ignore_error)
+ return 0;
+ error("Unable to find simple control '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+ snd_mixer_close(handle);
+ handle = NULL;
+ return -ENOENT;
+ }
+ if (!roflag) {
+ /* enum control */
+ if (snd_mixer_selem_is_enumerated(elem))
+ err = sset_enum(elem, argc, argv);
+ else
+ err = sset_channels(elem, argc, argv);
+
+ if (!err)
+ goto done;
+ if (err < 0) {
+ error("Invalid command!");
+ goto done;
+ }
+ }
+ if (!quiet) {
+ printf("Simple mixer control '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+ show_selem(handle, sid, " ", 1);
+ }
+ done:
+ if (! keep_handle) {
+ snd_mixer_close(handle);
+ handle = NULL;
+ }
+ return err < 0 ? 1 : 0;
+}
+
+static void events_info(snd_hctl_elem_t *helem)
+{
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_id_alloca(&id);
+ snd_hctl_elem_get_id(helem, id);
+ printf("event info: ");
+ show_control_id(id);
+ printf("\n");
+}
+
+static void events_value(snd_hctl_elem_t *helem)
+{
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_id_alloca(&id);
+ snd_hctl_elem_get_id(helem, id);
+ printf("event value: ");
+ show_control_id(id);
+ printf("\n");
+}
+
+static void events_remove(snd_hctl_elem_t *helem)
+{
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_id_alloca(&id);
+ snd_hctl_elem_get_id(helem, id);
+ printf("event remove: ");
+ show_control_id(id);
+ printf("\n");
+}
+
+static int element_callback(snd_hctl_elem_t *elem, unsigned int mask)
+{
+ if (mask == SND_CTL_EVENT_MASK_REMOVE) {
+ events_remove(elem);
+ return 0;
+ }
+ if (mask & SND_CTL_EVENT_MASK_INFO)
+ events_info(elem);
+ if (mask & SND_CTL_EVENT_MASK_VALUE)
+ events_value(elem);
+ return 0;
+}
+
+static void events_add(snd_hctl_elem_t *helem)
+{
+ snd_ctl_elem_id_t *id;
+ snd_ctl_elem_id_alloca(&id);
+ snd_hctl_elem_get_id(helem, id);
+ printf("event add: ");
+ show_control_id(id);
+ printf("\n");
+ snd_hctl_elem_set_callback(helem, element_callback);
+}
+
+static int ctl_callback(snd_hctl_t *ctl, unsigned int mask,
+ snd_hctl_elem_t *elem)
+{
+ if (mask & SND_CTL_EVENT_MASK_ADD)
+ events_add(elem);
+ return 0;
+}
+
+static int events(int argc ATTRIBUTE_UNUSED, char *argv[] ATTRIBUTE_UNUSED)
+{
+ snd_hctl_t *handle;
+ snd_hctl_elem_t *helem;
+ int err;
+
+ if ((err = snd_hctl_open(&handle, card, 0)) < 0) {
+ error("Control %s open error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ snd_hctl_set_callback(handle, ctl_callback);
+ if ((err = snd_hctl_load(handle)) < 0) {
+ error("Control %s hbuild error: %s\n", card, snd_strerror(err));
+ return err;
+ }
+ for (helem = snd_hctl_first_elem(handle); helem; helem = snd_hctl_elem_next(helem)) {
+ snd_hctl_elem_set_callback(helem, element_callback);
+ }
+ printf("Ready to listen...\n");
+ while (1) {
+ int res = snd_hctl_wait(handle, -1);
+ if (res >= 0) {
+ printf("Poll ok: %i\n", res);
+ res = snd_hctl_handle_events(handle);
+ assert(res > 0);
+ }
+ }
+ snd_hctl_close(handle);
+ return 0;
+}
+
+static void sevents_value(snd_mixer_selem_id_t *sid)
+{
+ printf("event value: '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+}
+
+static void sevents_info(snd_mixer_selem_id_t *sid)
+{
+ printf("event info: '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+}
+
+static void sevents_remove(snd_mixer_selem_id_t *sid)
+{
+ printf("event remove: '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+}
+
+static int melem_event(snd_mixer_elem_t *elem, unsigned int mask)
+{
+ snd_mixer_selem_id_t *sid;
+ snd_mixer_selem_id_alloca(&sid);
+ snd_mixer_selem_get_id(elem, sid);
+ if (mask == SND_CTL_EVENT_MASK_REMOVE) {
+ sevents_remove(sid);
+ return 0;
+ }
+ if (mask & SND_CTL_EVENT_MASK_INFO)
+ sevents_info(sid);
+ if (mask & SND_CTL_EVENT_MASK_VALUE)
+ sevents_value(sid);
+ return 0;
+}
+
+static void sevents_add(snd_mixer_elem_t *elem)
+{
+ snd_mixer_selem_id_t *sid;
+ snd_mixer_selem_id_alloca(&sid);
+ snd_mixer_selem_get_id(elem, sid);
+ printf("event add: '%s',%i\n", snd_mixer_selem_id_get_name(sid), snd_mixer_selem_id_get_index(sid));
+ snd_mixer_elem_set_callback(elem, melem_event);
+}
+
+static int mixer_event(snd_mixer_t *mixer, unsigned int mask,
+ snd_mixer_elem_t *elem)
+{
+ if (mask & SND_CTL_EVENT_MASK_ADD)
+ sevents_add(elem);
+ return 0;
+}
+
+static int sevents(int argc ATTRIBUTE_UNUSED, char *argv[] ATTRIBUTE_UNUSED)
+{
+ snd_mixer_t *handle;
+ int err;
+
+ if ((err = snd_mixer_open(&handle, 0)) < 0) {
+ error("Mixer %s open error: %s", card, snd_strerror(err));
+ return err;
+ }
+ if (smixer_level == 0 && (err = snd_mixer_attach(handle, card)) < 0) {
+ error("Mixer attach %s error: %s", card, snd_strerror(err));
+ snd_mixer_close(handle);
+ return err;
+ }
+ if ((err = snd_mixer_selem_register(handle, smixer_level > 0 ? &smixer_options : NULL, NULL)) < 0) {
+ error("Mixer register error: %s", snd_strerror(err));
+ snd_mixer_close(handle);
+ return err;
+ }
+ snd_mixer_set_callback(handle, mixer_event);
+ err = snd_mixer_load(handle);
+ if (err < 0) {
+ error("Mixer %s load error: %s", card, snd_strerror(err));
+ snd_mixer_close(handle);
+ return err;
+ }
+
+ printf("Ready to listen...\n");
+ while (1) {
+ int res;
+ res = snd_mixer_wait(handle, -1);
+ if (res >= 0) {
+ printf("Poll ok: %i\n", res);
+ res = snd_mixer_handle_events(handle);
+ assert(res >= 0);
+ }
+ }
+ snd_mixer_close(handle);
+ return 0;
+}
+
+/*
+ * split a line into tokens
+ * the content in the line buffer is modified
+ */
+static int split_line(char *buf, char **token, int max_token)
+{
+ char *dst;
+ int n, esc, quote;
+
+ for (n = 0; n < max_token; n++) {
+ while (isspace(*buf))
+ buf++;
+ if (! *buf || *buf == '\n')
+ return n;
+ /* skip comments */
+ if (*buf == '#' || *buf == '!')
+ return n;
+ esc = 0;
+ quote = 0;
+ token[n] = buf;
+ for (dst = buf; *buf && *buf != '\n'; buf++) {
+ if (esc)
+ esc = 0;
+ else if (isspace(*buf) && !quote) {
+ buf++;
+ break;
+ } else if (*buf == '\\') {
+ esc = 1;
+ continue;
+ } else if (*buf == '\'' || *buf == '"') {
+ if (! quote) {
+ quote = *buf;
+ continue;
+ } else if (*buf == quote) {
+ quote = 0;
+ continue;
+ }
+ }
+ *dst++ = *buf;
+ }
+ *dst = 0;
+ }
+ return n;
+}
+
+#define MAX_ARGS 32
+
+static int exec_stdin(void)
+{
+ int narg;
+ char buf[256], *args[MAX_ARGS];
+ int err = 0;
+
+ /* quiet = 1; */
+ ignore_error = 1;
+
+ while (fgets(buf, sizeof(buf), stdin)) {
+ narg = split_line(buf, args, MAX_ARGS);
+ if (narg > 0) {
+ if (!strcmp(args[0], "sset") || !strcmp(args[0], "set"))
+ err = sset(narg - 1, args + 1, 0, 1);
+ else if (!strcmp(args[0], "cset"))
+ err = cset(narg - 1, args + 1, 0, 1);
+ if (err < 0)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+
+int main(int argc, char *argv[])
+{
+ int morehelp, level = 0;
+ int read_stdin = 0;
+ static const struct option long_option[] =
+ {
+ {"help", 0, NULL, 'h'},
+ {"card", 1, NULL, 'c'},
+ {"device", 1, NULL, 'D'},
+ {"quiet", 0, NULL, 'q'},
+ {"inactive", 0, NULL, 'i'},
+ {"debug", 0, NULL, 'd'},
+ {"nocheck", 0, NULL, 'n'},
+ {"version", 0, NULL, 'v'},
+ {"abstract", 1, NULL, 'a'},
+ {"stdin", 0, NULL, 's'},
+ {"raw-volume", 0, NULL, 'R'},
+ {"mapped-volume", 0, NULL, 'M'},
+ {NULL, 0, NULL, 0},
+ };
+
+ morehelp = 0;
+ while (1) {
+ int c;
+
+ if ((c = getopt_long(argc, argv, "hc:D:qidnva:sRM", long_option, NULL)) < 0)
+ break;
+ switch (c) {
+ case 'h':
+ help();
+ return 0;
+ case 'c':
+ {
+ int i;
+ i = snd_card_get_index(optarg);
+ if (i >= 0 && i < 32)
+ sprintf(card, "hw:%i", i);
+ else {
+ fprintf(stderr, "Invalid card number.\n");
+ morehelp++;
+ }
+ }
+ break;
+ case 'D':
+ strncpy(card, optarg, sizeof(card)-1);
+ card[sizeof(card)-1] = '\0';
+ break;
+ case 'q':
+ quiet = 1;
+ break;
+ case 'i':
+ level |= LEVEL_INACTIVE;
+ break;
+ case 'd':
+ debugflag = 1;
+ break;
+ case 'n':
+ no_check = 1;
+ break;
+ case 'v':
+ printf("amixer version " SND_UTIL_VERSION_STR "\n");
+ return 1;
+ case 'a':
+ smixer_level = 1;
+ memset(&smixer_options, 0, sizeof(smixer_options));
+ smixer_options.ver = 1;
+ if (!strcmp(optarg, "none"))
+ smixer_options.abstract = SND_MIXER_SABSTRACT_NONE;
+ else if (!strcmp(optarg, "basic"))
+ smixer_options.abstract = SND_MIXER_SABSTRACT_BASIC;
+ else {
+ fprintf(stderr, "Select correct abstraction level (none or basic)...\n");
+ morehelp++;
+ }
+ break;
+ case 's':
+ read_stdin = 1;
+ break;
+ case 'R':
+ std_vol_type = VOL_RAW;
+ break;
+ case 'M':
+ std_vol_type = VOL_MAP;
+ break;
+ default:
+ fprintf(stderr, "Invalid switch or option needs an argument.\n");
+ morehelp++;
+ }
+ }
+ if (morehelp) {
+ help();
+ return 1;
+ }
+ smixer_options.device = card;
+
+ if (read_stdin)
+ return exec_stdin();
+
+ if (argc - optind <= 0) {
+ return selems(LEVEL_BASIC | level) ? 1 : 0;
+ }
+ if (!strcmp(argv[optind], "help")) {
+ return help() ? 1 : 0;
+ } else if (!strcmp(argv[optind], "info")) {
+ return info() ? 1 : 0;
+ } else if (!strcmp(argv[optind], "controls")) {
+ return controls(level) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "contents")) {
+ return controls(LEVEL_BASIC | level) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "scontrols") || !strcmp(argv[optind], "simple")) {
+ return selems(level) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "scontents")) {
+ return selems(LEVEL_BASIC | level) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "sset") || !strcmp(argv[optind], "set")) {
+ return sset(argc - optind - 1, argc - optind > 1 ? argv + optind + 1 : NULL, 0, 0) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "sget") || !strcmp(argv[optind], "get")) {
+ return sset(argc - optind - 1, argc - optind > 1 ? argv + optind + 1 : NULL, 1, 0) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "cset")) {
+ return cset(argc - optind - 1, argc - optind > 1 ? argv + optind + 1 : NULL, 0, 0) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "cget")) {
+ return cset(argc - optind - 1, argc - optind > 1 ? argv + optind + 1 : NULL, 1, 0) ? 1 : 0;
+ } else if (!strcmp(argv[optind], "events")) {
+ return events(argc - optind - 1, argc - optind > 1 ? argv + optind + 1 : NULL);
+ } else if (!strcmp(argv[optind], "sevents")) {
+ return sevents(argc - optind - 1, argc - optind > 1 ? argv + optind + 1 : NULL);
+ } else {
+ fprintf(stderr, "amixer: Unknown command '%s'...\n", argv[optind]);
+ }
+
+ return 0;
+}
diff --git a/amixer/amixer.h b/amixer/amixer.h
new file mode 100644
index 0000000..3588f04
--- /dev/null
+++ b/amixer/amixer.h
@@ -0,0 +1,21 @@
+/*
+ * ALSA command line mixer utility
+ * Copyright (c) 1999 by Jaroslav Kysela <perex@perex.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "../include/version.h"
diff --git a/aplay/Android.mk b/aplay/Android.mk
new file mode 100644
index 0000000..b0db639
--- /dev/null
+++ b/aplay/Android.mk
@@ -0,0 +1,22 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := aplay
+LOCAL_MODULE_TAGS := optional
+LOCAL_SRC_FILES := aplay.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+include $(BUILD_EXECUTABLE)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := arecord
+LOCAL_MODULE_TAGS := optional
+LOCAL_REQUIRED_MODULES := aplay
+include $(BUILD_PHONY_PACKAGE)
+
+.PHONY: create_arecord_symlink
+create_arecord_symlink: aplay
+ cd $(TARGET_OUT_EXECUTABLES) && ln -sf aplay arecord
+
+$(LOCAL_BUILT_MODULE): create_arecord_symlink
diff --git a/aplay/Makefile.am b/aplay/Makefile.am
new file mode 100644
index 0000000..92323d1
--- /dev/null
+++ b/aplay/Makefile.am
@@ -0,0 +1,31 @@
+LIBRT = @LIBRT@
+
+INCLUDES = -I$(top_srcdir)/include
+LDADD = $(LIBINTL) $(LIBRT)
+
+# debug flags
+#LDFLAGS = -static
+#LDADD += -ldl
+
+bin_PROGRAMS = aplay
+man_MANS = aplay.1 arecord.1
+noinst_HEADERS = formats.h
+
+EXTRA_DIST = aplay.1 arecord.1
+EXTRA_CLEAN = arecord
+
+arecord: aplay
+ rm -f arecord
+ $(LN_S) $< $@
+
+arecord.1: aplay.1
+ rm -f arecord.1
+ $(LN_S) $< $@
+
+install-exec-hook: arecord
+ rm -f $(DESTDIR)$(bindir)/arecord
+ (cd $(DESTDIR)$(bindir) && $(LN_S) aplay arecord)
+
+install-data-hook:
+ rm -f $(DESTDIR)$(mandir)/man1/arecord.1
+ (cd $(DESTDIR)$(mandir)/man1 && $(LN_S) aplay.1 arecord.1)
diff --git a/aplay/Makefile.in b/aplay/Makefile.in
new file mode 100644
index 0000000..0fe116c
--- /dev/null
+++ b/aplay/Makefile.in
@@ -0,0 +1,670 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = aplay$(EXEEXT)
+subdir = aplay
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+aplay_SOURCES = aplay.c
+aplay_OBJECTS = aplay.$(OBJEXT)
+aplay_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+aplay_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = aplay.c
+DIST_SOURCES = aplay.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = $(LIBINTL) $(LIBRT)
+man_MANS = aplay.1 arecord.1
+noinst_HEADERS = formats.h
+EXTRA_DIST = aplay.1 arecord.1
+EXTRA_CLEAN = arecord
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign aplay/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign aplay/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+aplay$(EXEEXT): $(aplay_OBJECTS) $(aplay_DEPENDENCIES) $(EXTRA_aplay_DEPENDENCIES)
+ @rm -f aplay$(EXEEXT)
+ $(LINK) $(aplay_OBJECTS) $(aplay_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aplay.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-data-am install-exec-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-hook \
+ install-html install-html-am install-info install-info-am \
+ install-man install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+arecord: aplay
+ rm -f arecord
+ $(LN_S) $< $@
+
+arecord.1: aplay.1
+ rm -f arecord.1
+ $(LN_S) $< $@
+
+install-exec-hook: arecord
+ rm -f $(DESTDIR)$(bindir)/arecord
+ (cd $(DESTDIR)$(bindir) && $(LN_S) aplay arecord)
+
+install-data-hook:
+ rm -f $(DESTDIR)$(mandir)/man1/arecord.1
+ (cd $(DESTDIR)$(mandir)/man1 && $(LN_S) aplay.1 arecord.1)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/aplay/NOTICE b/aplay/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/aplay/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/aplay/aplay.1 b/aplay/aplay.1
new file mode 100644
index 0000000..2945dad
--- /dev/null
+++ b/aplay/aplay.1
@@ -0,0 +1,263 @@
+.TH APLAY 1 "1 January 2010"
+.SH NAME
+arecord, aplay \- command\-line sound recorder and player for ALSA
+soundcard driver
+.SH SYNOPSIS
+\fBarecord\fP [\fIflags\fP] [filename]
+.br
+\fBaplay\fP [\fIflags\fP] [filename [filename]] ...
+
+.SH DESCRIPTION
+\fBarecord\fP is a command\-line soundfile recorder for the ALSA soundcard
+driver. It supports several file formats and multiple soundcards with
+multiple devices. If recording with interleaved mode samples the file is
+automatically split before the 2GB filesize.
+
+\fBaplay\fP is much the same, only it plays instead of recording. For
+supported soundfile formats, the sampling rate, bit depth, and so
+forth can be automatically determined from the soundfile header.
+
+If filename is not specified, the standard output or input is used. The \fBaplay\fP utility accepts multiple filenames.
+
+.SH OPTIONS
+.TP
+\fI\-h, \-\-help\fP
+Help: show syntax.
+.TP
+\fI\-\-version\fP
+Print current version.
+.TP
+\fI\-l, \-\-list\-devices\fP
+List all soundcards and digital audio devices
+.TP
+\fI\-L, \-\-list\-pcms\fP
+List all PCMs defined
+.TP
+\fI\-D, \-\-device=NAME\fP
+Select PCM by name
+.TP
+\fI\-q \-\-quiet\fP
+Quiet mode. Suppress messages (not sound :))
+.TP
+\fI\-t, \-\-file\-type TYPE\fP
+File type (voc, wav, raw or au).
+If this parameter is omitted the WAVE format is used.
+.TP
+\fI\-c, \-\-channels=#\fP
+The number of channels.
+The default is one channel.
+Valid values are 1 through 32.
+.TP
+\fI\-f \-\-format=FORMAT\fP
+Sample format
+.br
+Recognized sample formats are: S8 U8 S16_LE S16_BE U16_LE U16_BE S24_LE
+S24_BE U24_LE U24_BE S32_LE S32_BE U32_LE U32_BE FLOAT_LE FLOAT_BE
+FLOAT64_LE FLOAT64_BE IEC958_SUBFRAME_LE IEC958_SUBFRAME_BE MU_LAW
+A_LAW IMA_ADPCM MPEG GSM SPECIAL S24_3LE S24_3BE U24_3LE U24_3BE S20_3LE
+S20_3BE U20_3LE U20_3BE S18_3LE S18_3BE U18_3LE
+.br
+Some of these may not be available on selected hardware
+.br
+The available format shortcuts are:
+.nf
+\-f cd (16 bit little endian, 44100, stereo) [\-f S16_LE \-c2 \-r44100]
+\-f cdr (16 bit big endian, 44100, stereo) [\-f S16_BE \-c2 \-f44100]
+\-f dat (16 bit little endian, 48000, stereo) [\-f S16_LE \-c2 \-r48000]
+.fi
+If no format is given U8 is used.
+.TP
+\fI\-r, \-\-rate=#<Hz>\fP
+Sampling rate in Hertz. The default rate is 8000 Hertz.
+If the value specified is less than 300, it is taken as the rate in kilohertz.
+Valid values are 2000 through 192000 Hertz.
+.TP
+\fI\-d, \-\-duration=#\fP
+Interrupt after # seconds.
+A value of zero means infinity.
+The default is zero, so if this option is omitted then the arecord process will run until it is killed.
+.TP
+\fI\-s, \-\-sleep\-min=#\fP
+Min ticks to sleep. The default is not to sleep.
+.TP
+\fI\-M, \-\-mmap\fP
+Use memory\-mapped (mmap) I/O mode for the audio stream.
+If this option is not set, the read/write I/O mode will be used.
+.TP
+\fI\-N, \-\-nonblock\fP
+Open the audio device in non\-blocking mode. If the device is busy the program will exit immediately.
+If this option is not set the program will block until the audio device is available again.
+.TP
+\fI\-F, \-\-period\-time=#\fP
+Distance between interrupts is # microseconds.
+If no period time and no period size is given then a quarter of the buffer time is set.
+.TP
+\fI\-B, \-\-buffer\-time=#\fP
+Buffer duration is # microseconds
+If no buffer time and no buffer size is given then the maximal allowed buffer time but not more than 500ms is set.
+.TP
+\fI\-\-period\-size=#\fP
+Distance between interrupts is # frames
+If no period size and no period time is given then a quarter of the buffer size is set.
+.TP
+\fI\-\-buffer\-size=#\fP
+Buffer duration is # frames
+If no buffer time and no buffer size is given then the maximal allowed buffer time but not more than 500ms is set.
+.TP
+\fI\-A, \-\-avail\-min=#\fP
+Min available space for wakeup is # microseconds
+.TP
+\fI\-R, \-\-start\-delay=#\fP
+Delay for automatic PCM start is # microseconds
+(relative to buffer size if <= 0)
+.TP
+\fI\-T, \-\-stop\-delay=#\fP
+Delay for automatic PCM stop is # microseconds from xrun
+.TP
+\fI\-v, \-\-verbose\fP
+Show PCM structure and setup.
+This option is accumulative. The VU meter is displayed when this
+is given twice or three times.
+.TP
+\fI\-V, \-\-vumeter=TYPE\fP
+Specifies the VU\-meter type, either \fIstereo\fP or \fImono\fP.
+The stereo VU\-meter is available only for 2\-channel stereo samples
+with interleaved format.
+.TP
+\fI\-I, \-\-separate\-channels\fP
+One file for each channel. This option disables max\-file\-time
+and use\-strftime, and ignores SIGUSR1. The stereo VU meter is
+not available with separate channels.
+.TP
+\fI\-P\fP
+Playback. This is the default if the program is invoked
+by typing aplay.
+.TP
+\fI\-C\fP
+Record. This is the default if the program is invoked
+by typing arecord.
+.TP
+\fI\-i, \-\-interactive\fP
+Allow interactive operation via stdin.
+Currently only pause/resume via space or enter key is implemented.
+.TP
+\fI-m, \-\-chmap=ch1,ch2,...\fP
+Give the channel map to override or follow. Pass channel position
+strings like \fIFL\fP, \fIFR\fP, etc.
+
+If a device supports the override of the channel map, \fBaplay\fP
+tries to pass the given channel map.
+If it doesn't support the channel map override but still it provides
+the channel map information, \fBaplay\fP tries to rearrange the
+channel order in the buffer to match with the returned channel map
+from the device.
+.TP
+\fI\-\-disable\-resample\fP
+Disable automatic rate resample.
+.TP
+\fI\-\-disable\-channels\fP
+Disable automatic channel conversions.
+.TP
+\fI\-\-disable\-format\fP
+Disable automatic format conversions.
+.TP
+\fI\-\-disable\-softvol\fP
+Disable software volume control (softvol).
+.TP
+\fI\-\-test\-position\fP
+Test ring buffer position.
+.TP
+\fI\-\-test\-coef=<coef>\fP
+Test coefficient for ring buffer position; default is 8.
+Expression for validation is: coef * (buffer_size / 2).
+Minimum value is 1.
+.TP
+\fI\-\-test\-nowait\fP
+Do not wait for the ring buffer \(hy eats the whole CPU.
+.TP
+\fI\-\-max\-file\-time\fP
+While recording, when the output file has been accumulating
+sound for this long,
+close it and open a new output file. Default is the maximum
+size supported by the file format: 2 GiB for WAV files.
+This option has no effect if \-\-separate\-channels is
+specified.
+.TP
+\fI\-\-process\-id\-file <file name>\fP
+aplay writes its process ID here, so other programs can
+send signals to it.
+.TP
+\fI\-\-use\-strftime\fP
+When recording, interpret %\-codes in the file name parameter using
+the strftime facility whenever the output file is opened. The
+important strftime codes are: %Y is the year, %m month, %d day of
+the month, %H hour, %M minute and %S second. In addition, %v is
+the file number, starting at 1. When this option is specified,
+intermediate directories for the output file are created automatically.
+This option has no effect if \-\-separate\-channels is specified.
+.TP
+\fI\-\-dump\-hw\-params\fP
+Dump hw_params of the device preconfigured status to stderr. The dump
+lists capabilities of the selected device such as supported formats,
+sampling rates, numbers of channels, period and buffer bytes/sizes/times.
+For raw device hw:X this option basically lists hardware capabilities of
+the soundcard.
+.TP
+\fI\-\-fatal\-errors\fP
+Disables recovery attempts when errors (e.g. xrun) are encountered; the
+aplay process instead aborts immediately.
+
+.SH SIGNALS
+When recording, SIGINT, SIGTERM and SIGABRT will close the output
+file and exit. SIGUSR1 will close the output file, open a new one,
+and continue recording. However, SIGUSR1 does not work with
+\-\-separate\-channels.
+
+.SH EXAMPLES
+
+.TP
+\fBaplay \-c 1 \-t raw \-r 22050 \-f mu_law foobar\fR
+will play the raw file "foobar" as a
+22050\-Hz, mono, 8\-bit, Mu\-Law .au file.
+
+.TP
+\fBarecord \-d 10 \-f cd \-t wav \-D copy foobar.wav\fP
+will record foobar.wav as a 10\-second, CD\-quality wave file, using the
+PCM "copy" (which might be defined in the user's .asoundrc file as:
+.nf
+pcm.copy {
+ type plug
+ slave {
+ pcm hw
+ }
+ route_policy copy
+}
+.fi
+
+.TP
+\fBarecord \-t wav \-\-max\-file\-time 30 mon.wav\fP
+Record from the default audio source in monaural, 8,000 samples
+per second, 8 bits per sample. Start a new file every
+30 seconds. File names are mon\-nn.wav, where nn increases
+from 01. The file after mon\-99.wav is mon\-100.wav.
+
+.TP
+\fBarecord \-f cd \-t wav \-\-max\-file\-time 3600 \-\-use-strftime %Y/%m/%d/listen-%H-%M-%v.wav\fP
+Record in stereo from the default audio source. Create a new file
+every hour. The files are placed in directories based on their start dates
+and have names which include their start times and file numbers.
+
+.SH SEE ALSO
+\fB
+alsamixer(1),
+amixer(1)
+\fP
+
+.SH BUGS
+Note that .aiff files are not currently supported.
+
+.SH AUTHOR
+\fBarecord\fP and \fBaplay\fP are by Jaroslav Kysela <perex@perex.cz>
+This document is by Paul Winkler <zarmzarm@erols.com>.
+Updated for Alsa 0.9 by James Tappin <james@xena.uklinux.net>
+
diff --git a/aplay/aplay.c b/aplay/aplay.c
new file mode 100644
index 0000000..89c6b06
--- /dev/null
+++ b/aplay/aplay.c
@@ -0,0 +1,3226 @@
+/*
+ * aplay.c - plays and records
+ *
+ * CREATIVE LABS CHANNEL-files
+ * Microsoft WAVE-files
+ * SPARC AUDIO .AU-files
+ * Raw Data
+ *
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ * Based on vplay program by Michael Beck
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <malloc.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <getopt.h>
+#include <fcntl.h>
+#include <ctype.h>
+#include <errno.h>
+#include <limits.h>
+#include <time.h>
+#include <locale.h>
+#include <alsa/asoundlib.h>
+#include <assert.h>
+#include <termios.h>
+#include <signal.h>
+#include <sys/poll.h>
+#include <sys/uio.h>
+#include <sys/time.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <endian.h>
+#include "aconfig.h"
+#include "gettext.h"
+#include "formats.h"
+#include "version.h"
+
+#ifdef SND_CHMAP_API_VERSION
+#define CONFIG_SUPPORT_CHMAP 1
+#endif
+
+#ifndef LLONG_MAX
+#define LLONG_MAX 9223372036854775807LL
+#endif
+
+#ifndef le16toh
+#include <asm/byteorder.h>
+#define le16toh(x) __le16_to_cpu(x)
+#define be16toh(x) __be16_to_cpu(x)
+#define le32toh(x) __le32_to_cpu(x)
+#define be32toh(x) __be32_to_cpu(x)
+#endif
+
+#define DEFAULT_FORMAT SND_PCM_FORMAT_U8
+#define DEFAULT_SPEED 8000
+
+#define FORMAT_DEFAULT -1
+#define FORMAT_RAW 0
+#define FORMAT_VOC 1
+#define FORMAT_WAVE 2
+#define FORMAT_AU 3
+
+/* global data */
+
+static snd_pcm_sframes_t (*readi_func)(snd_pcm_t *handle, void *buffer, snd_pcm_uframes_t size);
+static snd_pcm_sframes_t (*writei_func)(snd_pcm_t *handle, const void *buffer, snd_pcm_uframes_t size);
+static snd_pcm_sframes_t (*readn_func)(snd_pcm_t *handle, void **bufs, snd_pcm_uframes_t size);
+static snd_pcm_sframes_t (*writen_func)(snd_pcm_t *handle, void **bufs, snd_pcm_uframes_t size);
+
+enum {
+ VUMETER_NONE,
+ VUMETER_MONO,
+ VUMETER_STEREO
+};
+
+static char *command;
+static snd_pcm_t *handle;
+static struct {
+ snd_pcm_format_t format;
+ unsigned int channels;
+ unsigned int rate;
+} hwparams, rhwparams;
+static int timelimit = 0;
+static int quiet_mode = 0;
+static int file_type = FORMAT_DEFAULT;
+static int open_mode = 0;
+static snd_pcm_stream_t stream = SND_PCM_STREAM_PLAYBACK;
+static int mmap_flag = 0;
+static int interleaved = 1;
+static int nonblock = 0;
+static int in_aborting = 0;
+static u_char *audiobuf = NULL;
+static snd_pcm_uframes_t chunk_size = 0;
+static unsigned period_time = 0;
+static unsigned buffer_time = 0;
+static snd_pcm_uframes_t period_frames = 0;
+static snd_pcm_uframes_t buffer_frames = 0;
+static int avail_min = -1;
+static int start_delay = 0;
+static int stop_delay = 0;
+static int monotonic = 0;
+static int interactive = 0;
+static int can_pause = 0;
+static int fatal_errors = 0;
+static int verbose = 0;
+static int vumeter = VUMETER_NONE;
+static int buffer_pos = 0;
+static size_t bits_per_sample, bits_per_frame;
+static size_t chunk_bytes;
+static int test_position = 0;
+static int test_coef = 8;
+static int test_nowait = 0;
+static snd_output_t *log;
+static long long max_file_size = 0;
+static int max_file_time = 0;
+static int use_strftime = 0;
+volatile static int recycle_capture_file = 0;
+static long term_c_lflag = -1;
+static int dump_hw_params = 0;
+
+static int fd = -1;
+static off64_t pbrec_count = LLONG_MAX, fdcount;
+static int vocmajor, vocminor;
+
+static char *pidfile_name = NULL;
+FILE *pidf = NULL;
+static int pidfile_written = 0;
+
+#ifdef CONFIG_SUPPORT_CHMAP
+static snd_pcm_chmap_t *channel_map = NULL; /* chmap to override */
+static unsigned int *hw_map = NULL; /* chmap to follow */
+#endif
+
+/* needed prototypes */
+
+static void done_stdin(void);
+
+static void playback(char *filename);
+static void capture(char *filename);
+static void playbackv(char **filenames, unsigned int count);
+static void capturev(char **filenames, unsigned int count);
+
+static void begin_voc(int fd, size_t count);
+static void end_voc(int fd);
+static void begin_wave(int fd, size_t count);
+static void end_wave(int fd);
+static void begin_au(int fd, size_t count);
+static void end_au(int fd);
+
+static const struct fmt_capture {
+ void (*start) (int fd, size_t count);
+ void (*end) (int fd);
+ char *what;
+ long long max_filesize;
+} fmt_rec_table[] = {
+ { NULL, NULL, N_("raw data"), LLONG_MAX },
+ { begin_voc, end_voc, N_("VOC"), 16000000LL },
+ /* FIXME: can WAV handle exactly 2GB or less than it? */
+ { begin_wave, end_wave, N_("WAVE"), 2147483648LL },
+ { begin_au, end_au, N_("Sparc Audio"), LLONG_MAX }
+};
+
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define error(...) do {\
+ fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, __VA_ARGS__); \
+ putc('\n', stderr); \
+} while (0)
+#else
+#define error(args...) do {\
+ fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, ##args); \
+ putc('\n', stderr); \
+} while (0)
+#endif
+
+static void usage(char *command)
+{
+ snd_pcm_format_t k;
+ printf(
+_("Usage: %s [OPTION]... [FILE]...\n"
+"\n"
+"-h, --help help\n"
+" --version print current version\n"
+"-l, --list-devices list all soundcards and digital audio devices\n"
+"-L, --list-pcms list device names\n"
+"-D, --device=NAME select PCM by name\n"
+"-q, --quiet quiet mode\n"
+"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
+"-c, --channels=# channels\n"
+"-f, --format=FORMAT sample format (case insensitive)\n"
+"-r, --rate=# sample rate\n"
+"-d, --duration=# interrupt after # seconds\n"
+"-M, --mmap mmap stream\n"
+"-N, --nonblock nonblocking mode\n"
+"-F, --period-time=# distance between interrupts is # microseconds\n"
+"-B, --buffer-time=# buffer duration is # microseconds\n"
+" --period-size=# distance between interrupts is # frames\n"
+" --buffer-size=# buffer duration is # frames\n"
+"-A, --avail-min=# min available space for wakeup is # microseconds\n"
+"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
+" (relative to buffer size if <= 0)\n"
+"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from xrun\n"
+"-v, --verbose show PCM structure and setup (accumulative)\n"
+"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
+"-I, --separate-channels one file for each channel\n"
+"-i, --interactive allow interactive operation from stdin\n"
+"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
+" --disable-resample disable automatic rate resample\n"
+" --disable-channels disable automatic channel conversions\n"
+" --disable-format disable automatic format conversions\n"
+" --disable-softvol disable software volume control (softvol)\n"
+" --test-position test ring buffer position\n"
+" --test-coef=# test coefficient for ring buffer position (default 8)\n"
+" expression for validation is: coef * (buffer_size / 2)\n"
+" --test-nowait do not wait for ring buffer - eats whole CPU\n"
+" --max-file-time=# start another output file when the old file has recorded\n"
+" for this many seconds\n"
+" --process-id-file write the process ID here\n"
+" --use-strftime apply the strftime facility to the output file name\n"
+" --dump-hw-params dump hw_params of the device\n"
+" --fatal-errors treat all errors as fatal\n"
+ )
+ , command);
+ printf(_("Recognized sample formats are:"));
+ for (k = 0; k < SND_PCM_FORMAT_LAST; ++k) {
+ const char *s = snd_pcm_format_name(k);
+ if (s)
+ printf(" %s", s);
+ }
+ printf(_("\nSome of these may not be available on selected hardware\n"));
+ printf(_("The available format shortcuts are:\n"));
+ printf(_("-f cd (16 bit little endian, 44100, stereo)\n"));
+ printf(_("-f cdr (16 bit big endian, 44100, stereo)\n"));
+ printf(_("-f dat (16 bit little endian, 48000, stereo)\n"));
+}
+
+static void device_list(void)
+{
+ snd_ctl_t *handle;
+ int card, err, dev, idx;
+ snd_ctl_card_info_t *info;
+ snd_pcm_info_t *pcminfo;
+ snd_ctl_card_info_alloca(&info);
+ snd_pcm_info_alloca(&pcminfo);
+
+ card = -1;
+ if (snd_card_next(&card) < 0 || card < 0) {
+ error(_("no soundcards found..."));
+ return;
+ }
+ printf(_("**** List of %s Hardware Devices ****\n"),
+ snd_pcm_stream_name(stream));
+ while (card >= 0) {
+ char name[32];
+ sprintf(name, "hw:%d", card);
+ if ((err = snd_ctl_open(&handle, name, 0)) < 0) {
+ error("control open (%i): %s", card, snd_strerror(err));
+ goto next_card;
+ }
+ if ((err = snd_ctl_card_info(handle, info)) < 0) {
+ error("control hardware info (%i): %s", card, snd_strerror(err));
+ snd_ctl_close(handle);
+ goto next_card;
+ }
+ dev = -1;
+ while (1) {
+ unsigned int count;
+ if (snd_ctl_pcm_next_device(handle, &dev)<0)
+ error("snd_ctl_pcm_next_device");
+ if (dev < 0)
+ break;
+ snd_pcm_info_set_device(pcminfo, dev);
+ snd_pcm_info_set_subdevice(pcminfo, 0);
+ snd_pcm_info_set_stream(pcminfo, stream);
+ if ((err = snd_ctl_pcm_info(handle, pcminfo)) < 0) {
+ if (err != -ENOENT)
+ error("control digital audio info (%i): %s", card, snd_strerror(err));
+ continue;
+ }
+ printf(_("card %i: %s [%s], device %i: %s [%s]\n"),
+ card, snd_ctl_card_info_get_id(info), snd_ctl_card_info_get_name(info),
+ dev,
+ snd_pcm_info_get_id(pcminfo),
+ snd_pcm_info_get_name(pcminfo));
+ count = snd_pcm_info_get_subdevices_count(pcminfo);
+ printf( _(" Subdevices: %i/%i\n"),
+ snd_pcm_info_get_subdevices_avail(pcminfo), count);
+ for (idx = 0; idx < (int)count; idx++) {
+ snd_pcm_info_set_subdevice(pcminfo, idx);
+ if ((err = snd_ctl_pcm_info(handle, pcminfo)) < 0) {
+ error("control digital audio playback info (%i): %s", card, snd_strerror(err));
+ } else {
+ printf(_(" Subdevice #%i: %s\n"),
+ idx, snd_pcm_info_get_subdevice_name(pcminfo));
+ }
+ }
+ }
+ snd_ctl_close(handle);
+ next_card:
+ if (snd_card_next(&card) < 0) {
+ error("snd_card_next");
+ break;
+ }
+ }
+}
+
+static void pcm_list(void)
+{
+ void **hints, **n;
+ char *name, *descr, *descr1, *io;
+ const char *filter;
+
+ if (snd_device_name_hint(-1, "pcm", &hints) < 0)
+ return;
+ n = hints;
+ filter = stream == SND_PCM_STREAM_CAPTURE ? "Input" : "Output";
+ while (*n != NULL) {
+ name = snd_device_name_get_hint(*n, "NAME");
+ descr = snd_device_name_get_hint(*n, "DESC");
+ io = snd_device_name_get_hint(*n, "IOID");
+ if (io != NULL && strcmp(io, filter) != 0)
+ goto __end;
+ printf("%s\n", name);
+ if ((descr1 = descr) != NULL) {
+ printf(" ");
+ while (*descr1) {
+ if (*descr1 == '\n')
+ printf("\n ");
+ else
+ putchar(*descr1);
+ descr1++;
+ }
+ putchar('\n');
+ }
+ __end:
+ if (name != NULL)
+ free(name);
+ if (descr != NULL)
+ free(descr);
+ if (io != NULL)
+ free(io);
+ n++;
+ }
+ snd_device_name_free_hint(hints);
+}
+
+static void version(void)
+{
+ printf("%s: version " SND_UTIL_VERSION_STR " by Jaroslav Kysela <perex@perex.cz>\n", command);
+}
+
+/*
+ * Subroutine to clean up before exit.
+ */
+static void prg_exit(int code)
+{
+ done_stdin();
+ if (handle)
+ snd_pcm_close(handle);
+ if (pidfile_written)
+ remove (pidfile_name);
+ exit(code);
+}
+
+static void signal_handler(int sig)
+{
+ if (in_aborting)
+ return;
+
+ in_aborting = 1;
+ if (verbose==2)
+ putchar('\n');
+ if (!quiet_mode)
+ fprintf(stderr, _("Aborted by signal %s...\n"), strsignal(sig));
+ if (handle)
+ snd_pcm_abort(handle);
+ if (sig == SIGABRT) {
+ /* do not call snd_pcm_close() and abort immediately */
+ handle = NULL;
+ prg_exit(EXIT_FAILURE);
+ }
+ signal(sig, signal_handler);
+}
+
+/* call on SIGUSR1 signal. */
+static void signal_handler_recycle (int sig)
+{
+ /* flag the capture loop to start a new output file */
+ recycle_capture_file = 1;
+}
+
+enum {
+ OPT_VERSION = 1,
+ OPT_PERIOD_SIZE,
+ OPT_BUFFER_SIZE,
+ OPT_DISABLE_RESAMPLE,
+ OPT_DISABLE_CHANNELS,
+ OPT_DISABLE_FORMAT,
+ OPT_DISABLE_SOFTVOL,
+ OPT_TEST_POSITION,
+ OPT_TEST_COEF,
+ OPT_TEST_NOWAIT,
+ OPT_MAX_FILE_TIME,
+ OPT_PROCESS_ID_FILE,
+ OPT_USE_STRFTIME,
+ OPT_DUMP_HWPARAMS,
+ OPT_FATAL_ERRORS,
+};
+
+int main(int argc, char *argv[])
+{
+ int option_index;
+ static const char short_options[] = "hnlLD:qt:c:f:r:d:MNF:A:R:T:B:vV:IPCi"
+#ifdef CONFIG_SUPPORT_CHMAP
+ "m:"
+#endif
+ ;
+ static const struct option long_options[] = {
+ {"help", 0, 0, 'h'},
+ {"version", 0, 0, OPT_VERSION},
+ {"list-devnames", 0, 0, 'n'},
+ {"list-devices", 0, 0, 'l'},
+ {"list-pcms", 0, 0, 'L'},
+ {"device", 1, 0, 'D'},
+ {"quiet", 0, 0, 'q'},
+ {"file-type", 1, 0, 't'},
+ {"channels", 1, 0, 'c'},
+ {"format", 1, 0, 'f'},
+ {"rate", 1, 0, 'r'},
+ {"duration", 1, 0 ,'d'},
+ {"mmap", 0, 0, 'M'},
+ {"nonblock", 0, 0, 'N'},
+ {"period-time", 1, 0, 'F'},
+ {"period-size", 1, 0, OPT_PERIOD_SIZE},
+ {"avail-min", 1, 0, 'A'},
+ {"start-delay", 1, 0, 'R'},
+ {"stop-delay", 1, 0, 'T'},
+ {"buffer-time", 1, 0, 'B'},
+ {"buffer-size", 1, 0, OPT_BUFFER_SIZE},
+ {"verbose", 0, 0, 'v'},
+ {"vumeter", 1, 0, 'V'},
+ {"separate-channels", 0, 0, 'I'},
+ {"playback", 0, 0, 'P'},
+ {"capture", 0, 0, 'C'},
+ {"disable-resample", 0, 0, OPT_DISABLE_RESAMPLE},
+ {"disable-channels", 0, 0, OPT_DISABLE_CHANNELS},
+ {"disable-format", 0, 0, OPT_DISABLE_FORMAT},
+ {"disable-softvol", 0, 0, OPT_DISABLE_SOFTVOL},
+ {"test-position", 0, 0, OPT_TEST_POSITION},
+ {"test-coef", 1, 0, OPT_TEST_COEF},
+ {"test-nowait", 0, 0, OPT_TEST_NOWAIT},
+ {"max-file-time", 1, 0, OPT_MAX_FILE_TIME},
+ {"process-id-file", 1, 0, OPT_PROCESS_ID_FILE},
+ {"use-strftime", 0, 0, OPT_USE_STRFTIME},
+ {"interactive", 0, 0, 'i'},
+ {"dump-hw-params", 0, 0, OPT_DUMP_HWPARAMS},
+ {"fatal-errors", 0, 0, OPT_FATAL_ERRORS},
+#ifdef CONFIG_SUPPORT_CHMAP
+ {"chmap", 1, 0, 'm'},
+#endif
+ {0, 0, 0, 0}
+ };
+ char *pcm_name = "default";
+ int tmp, err, c;
+ int do_device_list = 0, do_pcm_list = 0;
+ snd_pcm_info_t *info;
+ FILE *direction;
+
+#ifdef ENABLE_NLS
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+#endif
+
+ snd_pcm_info_alloca(&info);
+
+ err = snd_output_stdio_attach(&log, stderr, 0);
+ assert(err >= 0);
+
+ command = argv[0];
+ file_type = FORMAT_DEFAULT;
+ if (strstr(argv[0], "arecord")) {
+ stream = SND_PCM_STREAM_CAPTURE;
+ file_type = FORMAT_WAVE;
+ command = "arecord";
+ start_delay = 1;
+ direction = stdout;
+ } else if (strstr(argv[0], "aplay")) {
+ stream = SND_PCM_STREAM_PLAYBACK;
+ command = "aplay";
+ direction = stdin;
+ } else {
+ error(_("command should be named either arecord or aplay"));
+ return 1;
+ }
+
+ if (isatty(fileno(direction)) && (argc == 1)) {
+ usage(command);
+ return 1;
+ }
+
+ chunk_size = -1;
+ rhwparams.format = DEFAULT_FORMAT;
+ rhwparams.rate = DEFAULT_SPEED;
+ rhwparams.channels = 1;
+
+ while ((c = getopt_long(argc, argv, short_options, long_options, &option_index)) != -1) {
+ switch (c) {
+ case 'h':
+ usage(command);
+ return 0;
+ case OPT_VERSION:
+ version();
+ return 0;
+ case 'l':
+ do_device_list = 1;
+ break;
+ case 'L':
+ do_pcm_list = 1;
+ break;
+ case 'D':
+ pcm_name = optarg;
+ break;
+ case 'q':
+ quiet_mode = 1;
+ break;
+ case 't':
+ if (strcasecmp(optarg, "raw") == 0)
+ file_type = FORMAT_RAW;
+ else if (strcasecmp(optarg, "voc") == 0)
+ file_type = FORMAT_VOC;
+ else if (strcasecmp(optarg, "wav") == 0)
+ file_type = FORMAT_WAVE;
+ else if (strcasecmp(optarg, "au") == 0 || strcasecmp(optarg, "sparc") == 0)
+ file_type = FORMAT_AU;
+ else {
+ error(_("unrecognized file format %s"), optarg);
+ return 1;
+ }
+ break;
+ case 'c':
+ rhwparams.channels = strtol(optarg, NULL, 0);
+ if (rhwparams.channels < 1 || rhwparams.channels > 256) {
+ error(_("value %i for channels is invalid"), rhwparams.channels);
+ return 1;
+ }
+ break;
+ case 'f':
+ if (strcasecmp(optarg, "cd") == 0 || strcasecmp(optarg, "cdr") == 0) {
+ if (strcasecmp(optarg, "cdr") == 0)
+ rhwparams.format = SND_PCM_FORMAT_S16_BE;
+ else
+ rhwparams.format = file_type == FORMAT_AU ? SND_PCM_FORMAT_S16_BE : SND_PCM_FORMAT_S16_LE;
+ rhwparams.rate = 44100;
+ rhwparams.channels = 2;
+ } else if (strcasecmp(optarg, "dat") == 0) {
+ rhwparams.format = file_type == FORMAT_AU ? SND_PCM_FORMAT_S16_BE : SND_PCM_FORMAT_S16_LE;
+ rhwparams.rate = 48000;
+ rhwparams.channels = 2;
+ } else {
+ rhwparams.format = snd_pcm_format_value(optarg);
+ if (rhwparams.format == SND_PCM_FORMAT_UNKNOWN) {
+ error(_("wrong extended format '%s'"), optarg);
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ break;
+ case 'r':
+ tmp = strtol(optarg, NULL, 0);
+ if (tmp < 300)
+ tmp *= 1000;
+ rhwparams.rate = tmp;
+ if (tmp < 2000 || tmp > 192000) {
+ error(_("bad speed value %i"), tmp);
+ return 1;
+ }
+ break;
+ case 'd':
+ timelimit = strtol(optarg, NULL, 0);
+ break;
+ case 'N':
+ nonblock = 1;
+ open_mode |= SND_PCM_NONBLOCK;
+ break;
+ case 'F':
+ period_time = strtol(optarg, NULL, 0);
+ break;
+ case 'B':
+ buffer_time = strtol(optarg, NULL, 0);
+ break;
+ case OPT_PERIOD_SIZE:
+ period_frames = strtol(optarg, NULL, 0);
+ break;
+ case OPT_BUFFER_SIZE:
+ buffer_frames = strtol(optarg, NULL, 0);
+ break;
+ case 'A':
+ avail_min = strtol(optarg, NULL, 0);
+ break;
+ case 'R':
+ start_delay = strtol(optarg, NULL, 0);
+ break;
+ case 'T':
+ stop_delay = strtol(optarg, NULL, 0);
+ break;
+ case 'v':
+ verbose++;
+ if (verbose > 1 && !vumeter)
+ vumeter = VUMETER_MONO;
+ break;
+ case 'V':
+ if (*optarg == 's')
+ vumeter = VUMETER_STEREO;
+ else if (*optarg == 'm')
+ vumeter = VUMETER_MONO;
+ else
+ vumeter = VUMETER_NONE;
+ break;
+ case 'M':
+ mmap_flag = 1;
+ break;
+ case 'I':
+ interleaved = 0;
+ break;
+ case 'P':
+ stream = SND_PCM_STREAM_PLAYBACK;
+ command = "aplay";
+ break;
+ case 'C':
+ stream = SND_PCM_STREAM_CAPTURE;
+ command = "arecord";
+ start_delay = 1;
+ if (file_type == FORMAT_DEFAULT)
+ file_type = FORMAT_WAVE;
+ break;
+ case 'i':
+ interactive = 1;
+ break;
+ case OPT_DISABLE_RESAMPLE:
+ open_mode |= SND_PCM_NO_AUTO_RESAMPLE;
+ break;
+ case OPT_DISABLE_CHANNELS:
+ open_mode |= SND_PCM_NO_AUTO_CHANNELS;
+ break;
+ case OPT_DISABLE_FORMAT:
+ open_mode |= SND_PCM_NO_AUTO_FORMAT;
+ break;
+ case OPT_DISABLE_SOFTVOL:
+ open_mode |= SND_PCM_NO_SOFTVOL;
+ break;
+ case OPT_TEST_POSITION:
+ test_position = 1;
+ break;
+ case OPT_TEST_COEF:
+ test_coef = strtol(optarg, NULL, 0);
+ if (test_coef < 1)
+ test_coef = 1;
+ break;
+ case OPT_TEST_NOWAIT:
+ test_nowait = 1;
+ break;
+ case OPT_MAX_FILE_TIME:
+ max_file_time = strtol(optarg, NULL, 0);
+ break;
+ case OPT_PROCESS_ID_FILE:
+ pidfile_name = optarg;
+ break;
+ case OPT_USE_STRFTIME:
+ use_strftime = 1;
+ break;
+ case OPT_DUMP_HWPARAMS:
+ dump_hw_params = 1;
+ break;
+ case OPT_FATAL_ERRORS:
+ fatal_errors = 1;
+ break;
+#ifdef CONFIG_SUPPORT_CHMAP
+ case 'm':
+ channel_map = snd_pcm_chmap_parse_string(optarg);
+ if (!channel_map) {
+ fprintf(stderr, _("Unable to parse channel map string: %s\n"), optarg);
+ return 1;
+ }
+ break;
+#endif
+ default:
+ fprintf(stderr, _("Try `%s --help' for more information.\n"), command);
+ return 1;
+ }
+ }
+
+ if (do_device_list) {
+ if (do_pcm_list) pcm_list();
+ device_list();
+ goto __end;
+ } else if (do_pcm_list) {
+ pcm_list();
+ goto __end;
+ }
+
+ err = snd_pcm_open(&handle, pcm_name, stream, open_mode);
+ if (err < 0) {
+ error(_("audio open error: %s"), snd_strerror(err));
+ return 1;
+ }
+
+ if ((err = snd_pcm_info(handle, info)) < 0) {
+ error(_("info error: %s"), snd_strerror(err));
+ return 1;
+ }
+
+ if (nonblock) {
+ err = snd_pcm_nonblock(handle, 1);
+ if (err < 0) {
+ error(_("nonblock setting error: %s"), snd_strerror(err));
+ return 1;
+ }
+ }
+
+ chunk_size = 1024;
+ hwparams = rhwparams;
+
+ audiobuf = (u_char *)malloc(1024);
+ if (audiobuf == NULL) {
+ error(_("not enough memory"));
+ return 1;
+ }
+
+ if (mmap_flag) {
+ writei_func = snd_pcm_mmap_writei;
+ readi_func = snd_pcm_mmap_readi;
+ writen_func = snd_pcm_mmap_writen;
+ readn_func = snd_pcm_mmap_readn;
+ } else {
+ writei_func = snd_pcm_writei;
+ readi_func = snd_pcm_readi;
+ writen_func = snd_pcm_writen;
+ readn_func = snd_pcm_readn;
+ }
+
+ if (pidfile_name) {
+ errno = 0;
+ pidf = fopen (pidfile_name, "w");
+ if (pidf) {
+ (void)fprintf (pidf, "%d\n", getpid());
+ fclose(pidf);
+ pidfile_written = 1;
+ } else {
+ error(_("Cannot create process ID file %s: %s"),
+ pidfile_name, strerror (errno));
+ return 1;
+ }
+ }
+
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+ signal(SIGABRT, signal_handler);
+ signal(SIGUSR1, signal_handler_recycle);
+ if (interleaved) {
+ if (optind > argc - 1) {
+ if (stream == SND_PCM_STREAM_PLAYBACK)
+ playback(NULL);
+ else
+ capture(NULL);
+ } else {
+ while (optind <= argc - 1) {
+ if (stream == SND_PCM_STREAM_PLAYBACK)
+ playback(argv[optind++]);
+ else
+ capture(argv[optind++]);
+ }
+ }
+ } else {
+ if (stream == SND_PCM_STREAM_PLAYBACK)
+ playbackv(&argv[optind], argc - optind);
+ else
+ capturev(&argv[optind], argc - optind);
+ }
+ if (verbose==2)
+ putchar('\n');
+ snd_pcm_close(handle);
+ handle = NULL;
+ free(audiobuf);
+ __end:
+ snd_output_close(log);
+ snd_config_update_free_global();
+ prg_exit(EXIT_SUCCESS);
+ /* avoid warning */
+ return EXIT_SUCCESS;
+}
+
+/*
+ * Safe read (for pipes)
+ */
+
+static ssize_t safe_read(int fd, void *buf, size_t count)
+{
+ ssize_t result = 0, res;
+
+ while (count > 0 && !in_aborting) {
+ if ((res = read(fd, buf, count)) == 0)
+ break;
+ if (res < 0)
+ return result > 0 ? result : res;
+ count -= res;
+ result += res;
+ buf = (char *)buf + res;
+ }
+ return result;
+}
+
+/*
+ * Test, if it is a .VOC file and return >=0 if ok (this is the length of rest)
+ * < 0 if not
+ */
+static int test_vocfile(void *buffer)
+{
+ VocHeader *vp = buffer;
+
+ if (!memcmp(vp->magic, VOC_MAGIC_STRING, 20)) {
+ vocminor = LE_SHORT(vp->version) & 0xFF;
+ vocmajor = LE_SHORT(vp->version) / 256;
+ if (LE_SHORT(vp->version) != (0x1233 - LE_SHORT(vp->coded_ver)))
+ return -2; /* coded version mismatch */
+ return LE_SHORT(vp->headerlen) - sizeof(VocHeader); /* 0 mostly */
+ }
+ return -1; /* magic string fail */
+}
+
+/*
+ * helper for test_wavefile
+ */
+
+static size_t test_wavefile_read(int fd, u_char *buffer, size_t *size, size_t reqsize, int line)
+{
+ if (*size >= reqsize)
+ return *size;
+ if ((size_t)safe_read(fd, buffer + *size, reqsize - *size) != reqsize - *size) {
+ error(_("read error (called from line %i)"), line);
+ prg_exit(EXIT_FAILURE);
+ }
+ return *size = reqsize;
+}
+
+#define check_wavefile_space(buffer, len, blimit) \
+ if (len > blimit) { \
+ blimit = len; \
+ if ((buffer = realloc(buffer, blimit)) == NULL) { \
+ error(_("not enough memory")); \
+ prg_exit(EXIT_FAILURE); \
+ } \
+ }
+
+/*
+ * test, if it's a .WAV file, > 0 if ok (and set the speed, stereo etc.)
+ * == 0 if not
+ * Value returned is bytes to be discarded.
+ */
+static ssize_t test_wavefile(int fd, u_char *_buffer, size_t size)
+{
+ WaveHeader *h = (WaveHeader *)_buffer;
+ u_char *buffer = NULL;
+ size_t blimit = 0;
+ WaveFmtBody *f;
+ WaveChunkHeader *c;
+ u_int type, len;
+ unsigned short format, channels;
+ int big_endian, native_format;
+
+ if (size < sizeof(WaveHeader))
+ return -1;
+ if (h->magic == WAV_RIFF)
+ big_endian = 0;
+ else if (h->magic == WAV_RIFX)
+ big_endian = 1;
+ else
+ return -1;
+ if (h->type != WAV_WAVE)
+ return -1;
+
+ if (size > sizeof(WaveHeader)) {
+ check_wavefile_space(buffer, size - sizeof(WaveHeader), blimit);
+ memcpy(buffer, _buffer + sizeof(WaveHeader), size - sizeof(WaveHeader));
+ }
+ size -= sizeof(WaveHeader);
+ while (1) {
+ check_wavefile_space(buffer, sizeof(WaveChunkHeader), blimit);
+ test_wavefile_read(fd, buffer, &size, sizeof(WaveChunkHeader), __LINE__);
+ c = (WaveChunkHeader*)buffer;
+ type = c->type;
+ len = TO_CPU_INT(c->length, big_endian);
+ len += len % 2;
+ if (size > sizeof(WaveChunkHeader))
+ memmove(buffer, buffer + sizeof(WaveChunkHeader), size - sizeof(WaveChunkHeader));
+ size -= sizeof(WaveChunkHeader);
+ if (type == WAV_FMT)
+ break;
+ check_wavefile_space(buffer, len, blimit);
+ test_wavefile_read(fd, buffer, &size, len, __LINE__);
+ if (size > len)
+ memmove(buffer, buffer + len, size - len);
+ size -= len;
+ }
+
+ if (len < sizeof(WaveFmtBody)) {
+ error(_("unknown length of 'fmt ' chunk (read %u, should be %u at least)"),
+ len, (u_int)sizeof(WaveFmtBody));
+ prg_exit(EXIT_FAILURE);
+ }
+ check_wavefile_space(buffer, len, blimit);
+ test_wavefile_read(fd, buffer, &size, len, __LINE__);
+ f = (WaveFmtBody*) buffer;
+ format = TO_CPU_SHORT(f->format, big_endian);
+ if (format == WAV_FMT_EXTENSIBLE) {
+ WaveFmtExtensibleBody *fe = (WaveFmtExtensibleBody*)buffer;
+ if (len < sizeof(WaveFmtExtensibleBody)) {
+ error(_("unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"),
+ len, (u_int)sizeof(WaveFmtExtensibleBody));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (memcmp(fe->guid_tag, WAV_GUID_TAG, 14) != 0) {
+ error(_("wrong format tag in extensible 'fmt ' chunk"));
+ prg_exit(EXIT_FAILURE);
+ }
+ format = TO_CPU_SHORT(fe->guid_format, big_endian);
+ }
+ if (format != WAV_FMT_PCM &&
+ format != WAV_FMT_IEEE_FLOAT) {
+ error(_("can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"), format);
+ prg_exit(EXIT_FAILURE);
+ }
+ channels = TO_CPU_SHORT(f->channels, big_endian);
+ if (channels < 1) {
+ error(_("can't play WAVE-files with %d tracks"), channels);
+ prg_exit(EXIT_FAILURE);
+ }
+ hwparams.channels = channels;
+ switch (TO_CPU_SHORT(f->bit_p_spl, big_endian)) {
+ case 8:
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != SND_PCM_FORMAT_U8)
+ fprintf(stderr, _("Warning: format is changed to U8\n"));
+ hwparams.format = SND_PCM_FORMAT_U8;
+ break;
+ case 16:
+ if (big_endian)
+ native_format = SND_PCM_FORMAT_S16_BE;
+ else
+ native_format = SND_PCM_FORMAT_S16_LE;
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != native_format)
+ fprintf(stderr, _("Warning: format is changed to %s\n"),
+ snd_pcm_format_name(native_format));
+ hwparams.format = native_format;
+ break;
+ case 24:
+ switch (TO_CPU_SHORT(f->byte_p_spl, big_endian) / hwparams.channels) {
+ case 3:
+ if (big_endian)
+ native_format = SND_PCM_FORMAT_S24_3BE;
+ else
+ native_format = SND_PCM_FORMAT_S24_3LE;
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != native_format)
+ fprintf(stderr, _("Warning: format is changed to %s\n"),
+ snd_pcm_format_name(native_format));
+ hwparams.format = native_format;
+ break;
+ case 4:
+ if (big_endian)
+ native_format = SND_PCM_FORMAT_S24_BE;
+ else
+ native_format = SND_PCM_FORMAT_S24_LE;
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != native_format)
+ fprintf(stderr, _("Warning: format is changed to %s\n"),
+ snd_pcm_format_name(native_format));
+ hwparams.format = native_format;
+ break;
+ default:
+ error(_(" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"),
+ TO_CPU_SHORT(f->bit_p_spl, big_endian),
+ TO_CPU_SHORT(f->byte_p_spl, big_endian),
+ hwparams.channels);
+ prg_exit(EXIT_FAILURE);
+ }
+ break;
+ case 32:
+ if (format == WAV_FMT_PCM) {
+ if (big_endian)
+ native_format = SND_PCM_FORMAT_S32_BE;
+ else
+ native_format = SND_PCM_FORMAT_S32_LE;
+ hwparams.format = native_format;
+ } else if (format == WAV_FMT_IEEE_FLOAT) {
+ if (big_endian)
+ native_format = SND_PCM_FORMAT_FLOAT_BE;
+ else
+ native_format = SND_PCM_FORMAT_FLOAT_LE;
+ hwparams.format = native_format;
+ }
+ break;
+ default:
+ error(_(" can't play WAVE-files with sample %d bits wide"),
+ TO_CPU_SHORT(f->bit_p_spl, big_endian));
+ prg_exit(EXIT_FAILURE);
+ }
+ hwparams.rate = TO_CPU_INT(f->sample_fq, big_endian);
+
+ if (size > len)
+ memmove(buffer, buffer + len, size - len);
+ size -= len;
+
+ while (1) {
+ u_int type, len;
+
+ check_wavefile_space(buffer, sizeof(WaveChunkHeader), blimit);
+ test_wavefile_read(fd, buffer, &size, sizeof(WaveChunkHeader), __LINE__);
+ c = (WaveChunkHeader*)buffer;
+ type = c->type;
+ len = TO_CPU_INT(c->length, big_endian);
+ if (size > sizeof(WaveChunkHeader))
+ memmove(buffer, buffer + sizeof(WaveChunkHeader), size - sizeof(WaveChunkHeader));
+ size -= sizeof(WaveChunkHeader);
+ if (type == WAV_DATA) {
+ if (len < pbrec_count && len < 0x7ffffffe)
+ pbrec_count = len;
+ if (size > 0)
+ memcpy(_buffer, buffer, size);
+ free(buffer);
+ return size;
+ }
+ len += len % 2;
+ check_wavefile_space(buffer, len, blimit);
+ test_wavefile_read(fd, buffer, &size, len, __LINE__);
+ if (size > len)
+ memmove(buffer, buffer + len, size - len);
+ size -= len;
+ }
+
+ /* shouldn't be reached */
+ return -1;
+}
+
+/*
+
+ */
+
+static int test_au(int fd, void *buffer)
+{
+ AuHeader *ap = buffer;
+
+ if (ap->magic != AU_MAGIC)
+ return -1;
+ if (BE_INT(ap->hdr_size) > 128 || BE_INT(ap->hdr_size) < 24)
+ return -1;
+ pbrec_count = BE_INT(ap->data_size);
+ switch (BE_INT(ap->encoding)) {
+ case AU_FMT_ULAW:
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != SND_PCM_FORMAT_MU_LAW)
+ fprintf(stderr, _("Warning: format is changed to MU_LAW\n"));
+ hwparams.format = SND_PCM_FORMAT_MU_LAW;
+ break;
+ case AU_FMT_LIN8:
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != SND_PCM_FORMAT_U8)
+ fprintf(stderr, _("Warning: format is changed to U8\n"));
+ hwparams.format = SND_PCM_FORMAT_U8;
+ break;
+ case AU_FMT_LIN16:
+ if (hwparams.format != DEFAULT_FORMAT &&
+ hwparams.format != SND_PCM_FORMAT_S16_BE)
+ fprintf(stderr, _("Warning: format is changed to S16_BE\n"));
+ hwparams.format = SND_PCM_FORMAT_S16_BE;
+ break;
+ default:
+ return -1;
+ }
+ hwparams.rate = BE_INT(ap->sample_rate);
+ if (hwparams.rate < 2000 || hwparams.rate > 256000)
+ return -1;
+ hwparams.channels = BE_INT(ap->channels);
+ if (hwparams.channels < 1 || hwparams.channels > 256)
+ return -1;
+ if ((size_t)safe_read(fd, buffer + sizeof(AuHeader), BE_INT(ap->hdr_size) - sizeof(AuHeader)) != BE_INT(ap->hdr_size) - sizeof(AuHeader)) {
+ error(_("read error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ return 0;
+}
+
+static void show_available_sample_formats(snd_pcm_hw_params_t* params)
+{
+ snd_pcm_format_t format;
+
+ fprintf(stderr, "Available formats:\n");
+ for (format = 0; format < SND_PCM_FORMAT_LAST; format++) {
+ if (snd_pcm_hw_params_test_format(handle, params, format) == 0)
+ fprintf(stderr, "- %s\n", snd_pcm_format_name(format));
+ }
+}
+
+#ifdef CONFIG_SUPPORT_CHMAP
+static int setup_chmap(void)
+{
+ snd_pcm_chmap_t *chmap = channel_map;
+ char mapped[hwparams.channels];
+ snd_pcm_chmap_t *hw_chmap;
+ unsigned int ch, i;
+ int err;
+
+ if (!chmap)
+ return 0;
+
+ if (chmap->channels != hwparams.channels) {
+ error(_("Channel numbers don't match between hw_params and channel map"));
+ return -1;
+ }
+ err = snd_pcm_set_chmap(handle, chmap);
+ if (!err)
+ return 0;
+
+ hw_chmap = snd_pcm_get_chmap(handle);
+ if (!hw_chmap) {
+ fprintf(stderr, _("Warning: unable to get channel map\n"));
+ return 0;
+ }
+
+ if (hw_chmap->channels == chmap->channels &&
+ !memcmp(hw_chmap, chmap, 4 * (chmap->channels + 1))) {
+ /* maps are identical, so no need to convert */
+ free(hw_chmap);
+ return 0;
+ }
+
+ hw_map = calloc(hwparams.channels, sizeof(int));
+ if (!hw_map) {
+ error(_("not enough memory"));
+ return -1;
+ }
+
+ memset(mapped, 0, sizeof(mapped));
+ for (ch = 0; ch < hw_chmap->channels; ch++) {
+ if (chmap->pos[ch] == hw_chmap->pos[ch]) {
+ mapped[ch] = 1;
+ hw_map[ch] = ch;
+ continue;
+ }
+ for (i = 0; i < hw_chmap->channels; i++) {
+ if (!mapped[i] && chmap->pos[ch] == hw_chmap->pos[i]) {
+ mapped[i] = 1;
+ hw_map[ch] = i;
+ break;
+ }
+ }
+ if (i >= hw_chmap->channels) {
+ char buf[256];
+ error(_("Channel %d doesn't match with hw_parmas"), ch);
+ snd_pcm_chmap_print(hw_chmap, sizeof(buf), buf);
+ fprintf(stderr, "hardware chmap = %s\n", buf);
+ return -1;
+ }
+ }
+ free(hw_chmap);
+ return 0;
+}
+#else
+#define setup_chmap() 0
+#endif
+
+static void set_params(void)
+{
+ snd_pcm_hw_params_t *params;
+ snd_pcm_sw_params_t *swparams;
+ snd_pcm_uframes_t buffer_size;
+ int err;
+ size_t n;
+ unsigned int rate;
+ snd_pcm_uframes_t start_threshold, stop_threshold;
+ snd_pcm_hw_params_alloca(¶ms);
+ snd_pcm_sw_params_alloca(&swparams);
+ err = snd_pcm_hw_params_any(handle, params);
+ if (err < 0) {
+ error(_("Broken configuration for this PCM: no configurations available"));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (dump_hw_params) {
+ fprintf(stderr, _("HW Params of device \"%s\":\n"),
+ snd_pcm_name(handle));
+ fprintf(stderr, "--------------------\n");
+ snd_pcm_hw_params_dump(params, log);
+ fprintf(stderr, "--------------------\n");
+ }
+ if (mmap_flag) {
+ snd_pcm_access_mask_t *mask = alloca(snd_pcm_access_mask_sizeof());
+ snd_pcm_access_mask_none(mask);
+ snd_pcm_access_mask_set(mask, SND_PCM_ACCESS_MMAP_INTERLEAVED);
+ snd_pcm_access_mask_set(mask, SND_PCM_ACCESS_MMAP_NONINTERLEAVED);
+ snd_pcm_access_mask_set(mask, SND_PCM_ACCESS_MMAP_COMPLEX);
+ err = snd_pcm_hw_params_set_access_mask(handle, params, mask);
+ } else if (interleaved)
+ err = snd_pcm_hw_params_set_access(handle, params,
+ SND_PCM_ACCESS_RW_INTERLEAVED);
+ else
+ err = snd_pcm_hw_params_set_access(handle, params,
+ SND_PCM_ACCESS_RW_NONINTERLEAVED);
+ if (err < 0) {
+ error(_("Access type not available"));
+ prg_exit(EXIT_FAILURE);
+ }
+ err = snd_pcm_hw_params_set_format(handle, params, hwparams.format);
+ if (err < 0) {
+ error(_("Sample format non available"));
+ show_available_sample_formats(params);
+ prg_exit(EXIT_FAILURE);
+ }
+ err = snd_pcm_hw_params_set_channels(handle, params, hwparams.channels);
+ if (err < 0) {
+ error(_("Channels count non available"));
+ prg_exit(EXIT_FAILURE);
+ }
+
+#if 0
+ err = snd_pcm_hw_params_set_periods_min(handle, params, 2);
+ assert(err >= 0);
+#endif
+ rate = hwparams.rate;
+ err = snd_pcm_hw_params_set_rate_near(handle, params, &hwparams.rate, 0);
+ assert(err >= 0);
+ if ((float)rate * 1.05 < hwparams.rate || (float)rate * 0.95 > hwparams.rate) {
+ if (!quiet_mode) {
+ char plugex[64];
+ const char *pcmname = snd_pcm_name(handle);
+ fprintf(stderr, _("Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"), rate, hwparams.rate);
+ if (! pcmname || strchr(snd_pcm_name(handle), ':'))
+ *plugex = 0;
+ else
+ snprintf(plugex, sizeof(plugex), "(-Dplug:%s)",
+ snd_pcm_name(handle));
+ fprintf(stderr, _(" please, try the plug plugin %s\n"),
+ plugex);
+ }
+ }
+ rate = hwparams.rate;
+ if (buffer_time == 0 && buffer_frames == 0) {
+ err = snd_pcm_hw_params_get_buffer_time_max(params,
+ &buffer_time, 0);
+ assert(err >= 0);
+ if (buffer_time > 500000)
+ buffer_time = 500000;
+ }
+ if (period_time == 0 && period_frames == 0) {
+ if (buffer_time > 0)
+ period_time = buffer_time / 4;
+ else
+ period_frames = buffer_frames / 4;
+ }
+ if (period_time > 0)
+ err = snd_pcm_hw_params_set_period_time_near(handle, params,
+ &period_time, 0);
+ else
+ err = snd_pcm_hw_params_set_period_size_near(handle, params,
+ &period_frames, 0);
+ assert(err >= 0);
+ if (buffer_time > 0) {
+ err = snd_pcm_hw_params_set_buffer_time_near(handle, params,
+ &buffer_time, 0);
+ } else {
+ err = snd_pcm_hw_params_set_buffer_size_near(handle, params,
+ &buffer_frames);
+ }
+ assert(err >= 0);
+ monotonic = snd_pcm_hw_params_is_monotonic(params);
+ can_pause = snd_pcm_hw_params_can_pause(params);
+ err = snd_pcm_hw_params(handle, params);
+ if (err < 0) {
+ error(_("Unable to install hw params:"));
+ snd_pcm_hw_params_dump(params, log);
+ prg_exit(EXIT_FAILURE);
+ }
+ snd_pcm_hw_params_get_period_size(params, &chunk_size, 0);
+ snd_pcm_hw_params_get_buffer_size(params, &buffer_size);
+ if (chunk_size == buffer_size) {
+ error(_("Can't use period equal to buffer size (%lu == %lu)"),
+ chunk_size, buffer_size);
+ prg_exit(EXIT_FAILURE);
+ }
+ snd_pcm_sw_params_current(handle, swparams);
+ if (avail_min < 0)
+ n = chunk_size;
+ else
+ n = (double) rate * avail_min / 1000000;
+ err = snd_pcm_sw_params_set_avail_min(handle, swparams, n);
+
+ /* round up to closest transfer boundary */
+ n = buffer_size;
+ if (start_delay <= 0) {
+ start_threshold = n + (double) rate * start_delay / 1000000;
+ } else
+ start_threshold = (double) rate * start_delay / 1000000;
+ if (start_threshold < 1)
+ start_threshold = 1;
+ if (start_threshold > n)
+ start_threshold = n;
+ err = snd_pcm_sw_params_set_start_threshold(handle, swparams, start_threshold);
+ assert(err >= 0);
+ if (stop_delay <= 0)
+ stop_threshold = buffer_size + (double) rate * stop_delay / 1000000;
+ else
+ stop_threshold = (double) rate * stop_delay / 1000000;
+ err = snd_pcm_sw_params_set_stop_threshold(handle, swparams, stop_threshold);
+ assert(err >= 0);
+
+ if (snd_pcm_sw_params(handle, swparams) < 0) {
+ error(_("unable to install sw params:"));
+ snd_pcm_sw_params_dump(swparams, log);
+ prg_exit(EXIT_FAILURE);
+ }
+
+ if (setup_chmap())
+ prg_exit(EXIT_FAILURE);
+
+ if (verbose)
+ snd_pcm_dump(handle, log);
+
+ bits_per_sample = snd_pcm_format_physical_width(hwparams.format);
+ bits_per_frame = bits_per_sample * hwparams.channels;
+ chunk_bytes = chunk_size * bits_per_frame / 8;
+ audiobuf = realloc(audiobuf, chunk_bytes);
+ if (audiobuf == NULL) {
+ error(_("not enough memory"));
+ prg_exit(EXIT_FAILURE);
+ }
+ // fprintf(stderr, "real chunk_size = %i, frags = %i, total = %i\n", chunk_size, setup.buf.block.frags, setup.buf.block.frags * chunk_size);
+
+ /* stereo VU-meter isn't always available... */
+ if (vumeter == VUMETER_STEREO) {
+ if (hwparams.channels != 2 || !interleaved || verbose > 2)
+ vumeter = VUMETER_MONO;
+ }
+
+ /* show mmap buffer arragment */
+ if (mmap_flag && verbose) {
+ const snd_pcm_channel_area_t *areas;
+ snd_pcm_uframes_t offset, size = chunk_size;
+ int i;
+ err = snd_pcm_mmap_begin(handle, &areas, &offset, &size);
+ if (err < 0) {
+ error(_("snd_pcm_mmap_begin problem: %s"), snd_strerror(err));
+ prg_exit(EXIT_FAILURE);
+ }
+ for (i = 0; i < hwparams.channels; i++)
+ fprintf(stderr, "mmap_area[%i] = %p,%u,%u (%u)\n", i, areas[i].addr, areas[i].first, areas[i].step, snd_pcm_format_physical_width(hwparams.format));
+ /* not required, but for sure */
+ snd_pcm_mmap_commit(handle, offset, 0);
+ }
+
+ buffer_frames = buffer_size; /* for position test */
+}
+
+static void init_stdin(void)
+{
+ struct termios term;
+ long flags;
+
+ if (!interactive)
+ return;
+ if (!isatty(fileno(stdin))) {
+ interactive = 0;
+ return;
+ }
+ tcgetattr(fileno(stdin), &term);
+ term_c_lflag = term.c_lflag;
+ if (fd == fileno(stdin))
+ return;
+ flags = fcntl(fileno(stdin), F_GETFL);
+ if (flags < 0 || fcntl(fileno(stdin), F_SETFL, flags|O_NONBLOCK) < 0)
+ fprintf(stderr, _("stdin O_NONBLOCK flag setup failed\n"));
+ term.c_lflag &= ~ICANON;
+ tcsetattr(fileno(stdin), TCSANOW, &term);
+}
+
+static void done_stdin(void)
+{
+ struct termios term;
+
+ if (!interactive)
+ return;
+ if (fd == fileno(stdin) || term_c_lflag == -1)
+ return;
+ tcgetattr(fileno(stdin), &term);
+ term.c_lflag = term_c_lflag;
+ tcsetattr(fileno(stdin), TCSANOW, &term);
+}
+
+static void do_pause(void)
+{
+ int err;
+ unsigned char b;
+
+ if (!can_pause) {
+ fprintf(stderr, _("\rPAUSE command ignored (no hw support)\n"));
+ return;
+ }
+ err = snd_pcm_pause(handle, 1);
+ if (err < 0) {
+ error(_("pause push error: %s"), snd_strerror(err));
+ return;
+ }
+ while (1) {
+ while (read(fileno(stdin), &b, 1) != 1);
+ if (b == ' ' || b == '\r') {
+ while (read(fileno(stdin), &b, 1) == 1);
+ err = snd_pcm_pause(handle, 0);
+ if (err < 0)
+ error(_("pause release error: %s"), snd_strerror(err));
+ return;
+ }
+ }
+}
+
+static void check_stdin(void)
+{
+ unsigned char b;
+
+ if (!interactive)
+ return;
+ if (fd != fileno(stdin)) {
+ while (read(fileno(stdin), &b, 1) == 1) {
+ if (b == ' ' || b == '\r') {
+ while (read(fileno(stdin), &b, 1) == 1);
+ fprintf(stderr, _("\r=== PAUSE === "));
+ fflush(stderr);
+ do_pause();
+ fprintf(stderr, " \r");
+ fflush(stderr);
+ }
+ }
+ }
+}
+
+#ifndef timersub
+#define timersub(a, b, result) \
+do { \
+ (result)->tv_sec = (a)->tv_sec - (b)->tv_sec; \
+ (result)->tv_usec = (a)->tv_usec - (b)->tv_usec; \
+ if ((result)->tv_usec < 0) { \
+ --(result)->tv_sec; \
+ (result)->tv_usec += 1000000; \
+ } \
+} while (0)
+#endif
+
+#ifndef timermsub
+#define timermsub(a, b, result) \
+do { \
+ (result)->tv_sec = (a)->tv_sec - (b)->tv_sec; \
+ (result)->tv_nsec = (a)->tv_nsec - (b)->tv_nsec; \
+ if ((result)->tv_nsec < 0) { \
+ --(result)->tv_sec; \
+ (result)->tv_nsec += 1000000000L; \
+ } \
+} while (0)
+#endif
+
+/* I/O error handler */
+static void xrun(void)
+{
+ snd_pcm_status_t *status;
+ int res;
+
+ snd_pcm_status_alloca(&status);
+ if ((res = snd_pcm_status(handle, status))<0) {
+ error(_("status error: %s"), snd_strerror(res));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (snd_pcm_status_get_state(status) == SND_PCM_STATE_XRUN) {
+ if (fatal_errors) {
+ error(_("fatal %s: %s"),
+ stream == SND_PCM_STREAM_PLAYBACK ? _("underrun") : _("overrun"),
+ snd_strerror(res));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (monotonic) {
+#ifdef HAVE_CLOCK_GETTIME
+ struct timespec now, diff, tstamp;
+ clock_gettime(CLOCK_MONOTONIC, &now);
+ snd_pcm_status_get_trigger_htstamp(status, &tstamp);
+ timermsub(&now, &tstamp, &diff);
+ fprintf(stderr, _("%s!!! (at least %.3f ms long)\n"),
+ stream == SND_PCM_STREAM_PLAYBACK ? _("underrun") : _("overrun"),
+ diff.tv_sec * 1000 + diff.tv_nsec / 10000000.0);
+#else
+ fprintf(stderr, "%s !!!\n", _("underrun"));
+#endif
+ } else {
+ struct timeval now, diff, tstamp;
+ gettimeofday(&now, 0);
+ snd_pcm_status_get_trigger_tstamp(status, &tstamp);
+ timersub(&now, &tstamp, &diff);
+ fprintf(stderr, _("%s!!! (at least %.3f ms long)\n"),
+ stream == SND_PCM_STREAM_PLAYBACK ? _("underrun") : _("overrun"),
+ diff.tv_sec * 1000 + diff.tv_usec / 1000.0);
+ }
+ if (verbose) {
+ fprintf(stderr, _("Status:\n"));
+ snd_pcm_status_dump(status, log);
+ }
+ if ((res = snd_pcm_prepare(handle))<0) {
+ error(_("xrun: prepare error: %s"), snd_strerror(res));
+ prg_exit(EXIT_FAILURE);
+ }
+ return; /* ok, data should be accepted again */
+ } if (snd_pcm_status_get_state(status) == SND_PCM_STATE_DRAINING) {
+ if (verbose) {
+ fprintf(stderr, _("Status(DRAINING):\n"));
+ snd_pcm_status_dump(status, log);
+ }
+ if (stream == SND_PCM_STREAM_CAPTURE) {
+ fprintf(stderr, _("capture stream format change? attempting recover...\n"));
+ if ((res = snd_pcm_prepare(handle))<0) {
+ error(_("xrun(DRAINING): prepare error: %s"), snd_strerror(res));
+ prg_exit(EXIT_FAILURE);
+ }
+ return;
+ }
+ }
+ if (verbose) {
+ fprintf(stderr, _("Status(R/W):\n"));
+ snd_pcm_status_dump(status, log);
+ }
+ error(_("read/write error, state = %s"), snd_pcm_state_name(snd_pcm_status_get_state(status)));
+ prg_exit(EXIT_FAILURE);
+}
+
+/* I/O suspend handler */
+static void suspend(void)
+{
+ int res;
+
+ if (!quiet_mode)
+ fprintf(stderr, _("Suspended. Trying resume. ")); fflush(stderr);
+ while ((res = snd_pcm_resume(handle)) == -EAGAIN)
+ sleep(1); /* wait until suspend flag is released */
+ if (res < 0) {
+ if (!quiet_mode)
+ fprintf(stderr, _("Failed. Restarting stream. ")); fflush(stderr);
+ if ((res = snd_pcm_prepare(handle)) < 0) {
+ error(_("suspend: prepare error: %s"), snd_strerror(res));
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ if (!quiet_mode)
+ fprintf(stderr, _("Done.\n"));
+}
+
+static void print_vu_meter_mono(int perc, int maxperc)
+{
+ const int bar_length = 50;
+ char line[80];
+ int val;
+
+ for (val = 0; val <= perc * bar_length / 100 && val < bar_length; val++)
+ line[val] = '#';
+ for (; val <= maxperc * bar_length / 100 && val < bar_length; val++)
+ line[val] = ' ';
+ line[val] = '+';
+ for (++val; val <= bar_length; val++)
+ line[val] = ' ';
+ if (maxperc > 99)
+ sprintf(line + val, "| MAX");
+ else
+ sprintf(line + val, "| %02i%%", maxperc);
+ fputs(line, stderr);
+ if (perc > 100)
+ fprintf(stderr, _(" !clip "));
+}
+
+static void print_vu_meter_stereo(int *perc, int *maxperc)
+{
+ const int bar_length = 35;
+ char line[80];
+ int c;
+
+ memset(line, ' ', sizeof(line) - 1);
+ line[bar_length + 3] = '|';
+
+ for (c = 0; c < 2; c++) {
+ int p = perc[c] * bar_length / 100;
+ char tmp[4];
+ if (p > bar_length)
+ p = bar_length;
+ if (c)
+ memset(line + bar_length + 6 + 1, '#', p);
+ else
+ memset(line + bar_length - p - 1, '#', p);
+ p = maxperc[c] * bar_length / 100;
+ if (p > bar_length)
+ p = bar_length;
+ if (c)
+ line[bar_length + 6 + 1 + p] = '+';
+ else
+ line[bar_length - p - 1] = '+';
+ if (maxperc[c] > 99)
+ sprintf(tmp, "MAX");
+ else
+ sprintf(tmp, "%02d%%", maxperc[c]);
+ if (c)
+ memcpy(line + bar_length + 3 + 1, tmp, 3);
+ else
+ memcpy(line + bar_length, tmp, 3);
+ }
+ line[bar_length * 2 + 6 + 2] = 0;
+ fputs(line, stderr);
+}
+
+static void print_vu_meter(signed int *perc, signed int *maxperc)
+{
+ if (vumeter == VUMETER_STEREO)
+ print_vu_meter_stereo(perc, maxperc);
+ else
+ print_vu_meter_mono(*perc, *maxperc);
+}
+
+/* peak handler */
+static void compute_max_peak(u_char *data, size_t count)
+{
+ signed int val, max, perc[2], max_peak[2];
+ static int run = 0;
+ size_t ocount = count;
+ int format_little_endian = snd_pcm_format_little_endian(hwparams.format);
+ int ichans, c;
+
+ if (vumeter == VUMETER_STEREO)
+ ichans = 2;
+ else
+ ichans = 1;
+
+ memset(max_peak, 0, sizeof(max_peak));
+ switch (bits_per_sample) {
+ case 8: {
+ signed char *valp = (signed char *)data;
+ signed char mask = snd_pcm_format_silence(hwparams.format);
+ c = 0;
+ while (count-- > 0) {
+ val = *valp++ ^ mask;
+ val = abs(val);
+ if (max_peak[c] < val)
+ max_peak[c] = val;
+ if (vumeter == VUMETER_STEREO)
+ c = !c;
+ }
+ break;
+ }
+ case 16: {
+ signed short *valp = (signed short *)data;
+ signed short mask = snd_pcm_format_silence_16(hwparams.format);
+ signed short sval;
+
+ count /= 2;
+ c = 0;
+ while (count-- > 0) {
+ if (format_little_endian)
+ sval = le16toh(*valp);
+ else
+ sval = be16toh(*valp);
+ sval = abs(sval) ^ mask;
+ if (max_peak[c] < sval)
+ max_peak[c] = sval;
+ valp++;
+ if (vumeter == VUMETER_STEREO)
+ c = !c;
+ }
+ break;
+ }
+ case 24: {
+ unsigned char *valp = data;
+ signed int mask = snd_pcm_format_silence_32(hwparams.format);
+
+ count /= 3;
+ c = 0;
+ while (count-- > 0) {
+ if (format_little_endian) {
+ val = valp[0] | (valp[1]<<8) | (valp[2]<<16);
+ } else {
+ val = (valp[0]<<16) | (valp[1]<<8) | valp[2];
+ }
+ /* Correct signed bit in 32-bit value */
+ if (val & (1<<(bits_per_sample-1))) {
+ val |= 0xff<<24; /* Negate upper bits too */
+ }
+ val = abs(val) ^ mask;
+ if (max_peak[c] < val)
+ max_peak[c] = val;
+ valp += 3;
+ if (vumeter == VUMETER_STEREO)
+ c = !c;
+ }
+ break;
+ }
+ case 32: {
+ signed int *valp = (signed int *)data;
+ signed int mask = snd_pcm_format_silence_32(hwparams.format);
+
+ count /= 4;
+ c = 0;
+ while (count-- > 0) {
+ if (format_little_endian)
+ val = le32toh(*valp);
+ else
+ val = be32toh(*valp);
+ val = abs(val) ^ mask;
+ if (max_peak[c] < val)
+ max_peak[c] = val;
+ valp++;
+ if (vumeter == VUMETER_STEREO)
+ c = !c;
+ }
+ break;
+ }
+ default:
+ if (run == 0) {
+ fprintf(stderr, _("Unsupported bit size %d.\n"), (int)bits_per_sample);
+ run = 1;
+ }
+ return;
+ }
+ max = 1 << (bits_per_sample-1);
+ if (max <= 0)
+ max = 0x7fffffff;
+
+ for (c = 0; c < ichans; c++) {
+ if (bits_per_sample > 16)
+ perc[c] = max_peak[c] / (max / 100);
+ else
+ perc[c] = max_peak[c] * 100 / max;
+ }
+
+ if (interleaved && verbose <= 2) {
+ static int maxperc[2];
+ static time_t t=0;
+ const time_t tt=time(NULL);
+ if(tt>t) {
+ t=tt;
+ maxperc[0] = 0;
+ maxperc[1] = 0;
+ }
+ for (c = 0; c < ichans; c++)
+ if (perc[c] > maxperc[c])
+ maxperc[c] = perc[c];
+
+ putc('\r', stderr);
+ print_vu_meter(perc, maxperc);
+ fflush(stderr);
+ }
+ else if(verbose==3) {
+ printf(_("Max peak (%li samples): 0x%08x "), (long)ocount, max_peak[0]);
+ for (val = 0; val < 20; val++)
+ if (val <= perc[0] / 5)
+ putchar('#');
+ else
+ putchar(' ');
+ fprintf(stderr, " %i%%\n", perc[0]);
+ fflush(stderr);
+ }
+}
+
+static void do_test_position(void)
+{
+ static long counter = 0;
+ static time_t tmr = -1;
+ time_t now;
+ static float availsum, delaysum, samples;
+ static snd_pcm_sframes_t maxavail, maxdelay;
+ static snd_pcm_sframes_t minavail, mindelay;
+ static snd_pcm_sframes_t badavail = 0, baddelay = 0;
+ snd_pcm_sframes_t outofrange;
+ snd_pcm_sframes_t avail, delay;
+ int err;
+
+ err = snd_pcm_avail_delay(handle, &avail, &delay);
+ if (err < 0)
+ return;
+ outofrange = (test_coef * (snd_pcm_sframes_t)buffer_frames) / 2;
+ if (avail > outofrange || avail < -outofrange ||
+ delay > outofrange || delay < -outofrange) {
+ badavail = avail; baddelay = delay;
+ availsum = delaysum = samples = 0;
+ maxavail = maxdelay = 0;
+ minavail = mindelay = buffer_frames * 16;
+ fprintf(stderr, _("Suspicious buffer position (%li total): "
+ "avail = %li, delay = %li, buffer = %li\n"),
+ ++counter, (long)avail, (long)delay, (long)buffer_frames);
+ } else if (verbose) {
+ time(&now);
+ if (tmr == (time_t) -1) {
+ tmr = now;
+ availsum = delaysum = samples = 0;
+ maxavail = maxdelay = 0;
+ minavail = mindelay = buffer_frames * 16;
+ }
+ if (avail > maxavail)
+ maxavail = avail;
+ if (delay > maxdelay)
+ maxdelay = delay;
+ if (avail < minavail)
+ minavail = avail;
+ if (delay < mindelay)
+ mindelay = delay;
+ availsum += avail;
+ delaysum += delay;
+ samples++;
+ if (avail != 0 && now != tmr) {
+ fprintf(stderr, "BUFPOS: avg%li/%li "
+ "min%li/%li max%li/%li (%li) (%li:%li/%li)\n",
+ (long)(availsum / samples),
+ (long)(delaysum / samples),
+ (long)minavail, (long)mindelay,
+ (long)maxavail, (long)maxdelay,
+ (long)buffer_frames,
+ counter, badavail, baddelay);
+ tmr = now;
+ }
+ }
+}
+
+/*
+ */
+#ifdef CONFIG_SUPPORT_CHMAP
+static u_char *remap_data(u_char *data, size_t count)
+{
+ static u_char *tmp, *src, *dst;
+ static size_t tmp_size;
+ size_t sample_bytes = bits_per_sample / 8;
+ size_t step = bits_per_frame / 8;
+ size_t chunk_bytes;
+ unsigned int ch, i;
+
+ if (!hw_map)
+ return data;
+
+ chunk_bytes = count * bits_per_frame / 8;
+ if (tmp_size < chunk_bytes) {
+ free(tmp);
+ tmp = malloc(chunk_bytes);
+ if (!tmp) {
+ error(_("not enough memory"));
+ exit(1);
+ }
+ tmp_size = count;
+ }
+
+ src = data;
+ dst = tmp;
+ for (i = 0; i < count; i++) {
+ for (ch = 0; ch < hwparams.channels; ch++) {
+ memcpy(dst, src + sample_bytes * hw_map[ch],
+ sample_bytes);
+ dst += sample_bytes;
+ }
+ src += step;
+ }
+ return tmp;
+}
+
+static u_char **remap_datav(u_char **data, size_t count)
+{
+ static u_char **tmp;
+ unsigned int ch;
+
+ if (!hw_map)
+ return data;
+
+ if (!tmp) {
+ tmp = malloc(sizeof(*tmp) * hwparams.channels);
+ if (!tmp) {
+ error(_("not enough memory"));
+ exit(1);
+ }
+ for (ch = 0; ch < hwparams.channels; ch++)
+ tmp[ch] = data[hw_map[ch]];
+ }
+ return tmp;
+}
+#else
+#define remap_data(data, count) (data)
+#define remap_datav(data, count) (data)
+#endif
+
+/*
+ * write function
+ */
+
+static ssize_t pcm_write(u_char *data, size_t count)
+{
+ ssize_t r;
+ ssize_t result = 0;
+
+ if (count < chunk_size) {
+ snd_pcm_format_set_silence(hwparams.format, data + count * bits_per_frame / 8, (chunk_size - count) * hwparams.channels);
+ count = chunk_size;
+ }
+ data = remap_data(data, count);
+ while (count > 0) {
+ if (test_position)
+ do_test_position();
+ check_stdin();
+ r = writei_func(handle, data, count);
+ if (test_position)
+ do_test_position();
+ if (r == -EAGAIN || (r >= 0 && (size_t)r < count)) {
+ if (!test_nowait)
+ snd_pcm_wait(handle, 100);
+ } else if (r == -EPIPE) {
+ xrun();
+ } else if (r == -ESTRPIPE) {
+ suspend();
+ } else if (r < 0) {
+ error(_("write error: %s"), snd_strerror(r));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (r > 0) {
+ if (vumeter)
+ compute_max_peak(data, r * hwparams.channels);
+ result += r;
+ count -= r;
+ data += r * bits_per_frame / 8;
+ }
+ }
+ return result;
+}
+
+static ssize_t pcm_writev(u_char **data, unsigned int channels, size_t count)
+{
+ ssize_t r;
+ size_t result = 0;
+
+ if (count != chunk_size) {
+ unsigned int channel;
+ size_t offset = count;
+ size_t remaining = chunk_size - count;
+ for (channel = 0; channel < channels; channel++)
+ snd_pcm_format_set_silence(hwparams.format, data[channel] + offset * bits_per_sample / 8, remaining);
+ count = chunk_size;
+ }
+ data = remap_datav(data, count);
+ while (count > 0) {
+ unsigned int channel;
+ void *bufs[channels];
+ size_t offset = result;
+ for (channel = 0; channel < channels; channel++)
+ bufs[channel] = data[channel] + offset * bits_per_sample / 8;
+ if (test_position)
+ do_test_position();
+ check_stdin();
+ r = writen_func(handle, bufs, count);
+ if (test_position)
+ do_test_position();
+ if (r == -EAGAIN || (r >= 0 && (size_t)r < count)) {
+ if (!test_nowait)
+ snd_pcm_wait(handle, 100);
+ } else if (r == -EPIPE) {
+ xrun();
+ } else if (r == -ESTRPIPE) {
+ suspend();
+ } else if (r < 0) {
+ error(_("writev error: %s"), snd_strerror(r));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (r > 0) {
+ if (vumeter) {
+ for (channel = 0; channel < channels; channel++)
+ compute_max_peak(data[channel], r);
+ }
+ result += r;
+ count -= r;
+ }
+ }
+ return result;
+}
+
+/*
+ * read function
+ */
+
+static ssize_t pcm_read(u_char *data, size_t rcount)
+{
+ ssize_t r;
+ size_t result = 0;
+ size_t count = rcount;
+
+ if (count != chunk_size) {
+ count = chunk_size;
+ }
+
+ while (count > 0) {
+ if (test_position)
+ do_test_position();
+ check_stdin();
+ r = readi_func(handle, data, count);
+ if (test_position)
+ do_test_position();
+ if (r == -EAGAIN || (r >= 0 && (size_t)r < count)) {
+ if (!test_nowait)
+ snd_pcm_wait(handle, 100);
+ } else if (r == -EPIPE) {
+ xrun();
+ } else if (r == -ESTRPIPE) {
+ suspend();
+ } else if (r < 0) {
+ error(_("read error: %s"), snd_strerror(r));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (r > 0) {
+ if (vumeter)
+ compute_max_peak(data, r * hwparams.channels);
+ result += r;
+ count -= r;
+ data += r * bits_per_frame / 8;
+ }
+ }
+ return rcount;
+}
+
+static ssize_t pcm_readv(u_char **data, unsigned int channels, size_t rcount)
+{
+ ssize_t r;
+ size_t result = 0;
+ size_t count = rcount;
+
+ if (count != chunk_size) {
+ count = chunk_size;
+ }
+
+ while (count > 0) {
+ unsigned int channel;
+ void *bufs[channels];
+ size_t offset = result;
+ for (channel = 0; channel < channels; channel++)
+ bufs[channel] = data[channel] + offset * bits_per_sample / 8;
+ if (test_position)
+ do_test_position();
+ check_stdin();
+ r = readn_func(handle, bufs, count);
+ if (test_position)
+ do_test_position();
+ if (r == -EAGAIN || (r >= 0 && (size_t)r < count)) {
+ if (!test_nowait)
+ snd_pcm_wait(handle, 100);
+ } else if (r == -EPIPE) {
+ xrun();
+ } else if (r == -ESTRPIPE) {
+ suspend();
+ } else if (r < 0) {
+ error(_("readv error: %s"), snd_strerror(r));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (r > 0) {
+ if (vumeter) {
+ for (channel = 0; channel < channels; channel++)
+ compute_max_peak(data[channel], r);
+ }
+ result += r;
+ count -= r;
+ }
+ }
+ return rcount;
+}
+
+/*
+ * ok, let's play a .voc file
+ */
+
+static ssize_t voc_pcm_write(u_char *data, size_t count)
+{
+ ssize_t result = count, r;
+ size_t size;
+
+ while (count > 0) {
+ size = count;
+ if (size > chunk_bytes - buffer_pos)
+ size = chunk_bytes - buffer_pos;
+ memcpy(audiobuf + buffer_pos, data, size);
+ data += size;
+ count -= size;
+ buffer_pos += size;
+ if ((size_t)buffer_pos == chunk_bytes) {
+ if ((size_t)(r = pcm_write(audiobuf, chunk_size)) != chunk_size)
+ return r;
+ buffer_pos = 0;
+ }
+ }
+ return result;
+}
+
+static void voc_write_silence(unsigned x)
+{
+ unsigned l;
+ u_char *buf;
+
+ buf = (u_char *) malloc(chunk_bytes);
+ if (buf == NULL) {
+ error(_("can't allocate buffer for silence"));
+ return; /* not fatal error */
+ }
+ snd_pcm_format_set_silence(hwparams.format, buf, chunk_size * hwparams.channels);
+ while (x > 0 && !in_aborting) {
+ l = x;
+ if (l > chunk_size)
+ l = chunk_size;
+ if (voc_pcm_write(buf, l) != (ssize_t)l) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ x -= l;
+ }
+ free(buf);
+}
+
+static void voc_pcm_flush(void)
+{
+ if (buffer_pos > 0) {
+ size_t b;
+ if (snd_pcm_format_set_silence(hwparams.format, audiobuf + buffer_pos, chunk_bytes - buffer_pos * 8 / bits_per_sample) < 0)
+ fprintf(stderr, _("voc_pcm_flush - silence error"));
+ b = chunk_size;
+ if (pcm_write(audiobuf, b) != (ssize_t)b)
+ error(_("voc_pcm_flush error"));
+ }
+ snd_pcm_nonblock(handle, 0);
+ snd_pcm_drain(handle);
+ snd_pcm_nonblock(handle, nonblock);
+}
+
+static void voc_play(int fd, int ofs, char *name)
+{
+ int l;
+ VocBlockType *bp;
+ VocVoiceData *vd;
+ VocExtBlock *eb;
+ size_t nextblock, in_buffer;
+ u_char *data, *buf;
+ char was_extended = 0, output = 0;
+ u_short *sp, repeat = 0;
+ off64_t filepos = 0;
+
+#define COUNT(x) nextblock -= x; in_buffer -= x; data += x
+#define COUNT1(x) in_buffer -= x; data += x
+
+ data = buf = (u_char *)malloc(64 * 1024);
+ buffer_pos = 0;
+ if (data == NULL) {
+ error(_("malloc error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (!quiet_mode) {
+ fprintf(stderr, _("Playing Creative Labs Channel file '%s'...\n"), name);
+ }
+ /* first we waste the rest of header, ugly but we don't need seek */
+ while (ofs > (ssize_t)chunk_bytes) {
+ if ((size_t)safe_read(fd, buf, chunk_bytes) != chunk_bytes) {
+ error(_("read error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ ofs -= chunk_bytes;
+ }
+ if (ofs) {
+ if (safe_read(fd, buf, ofs) != ofs) {
+ error(_("read error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ hwparams.format = DEFAULT_FORMAT;
+ hwparams.channels = 1;
+ hwparams.rate = DEFAULT_SPEED;
+ set_params();
+
+ in_buffer = nextblock = 0;
+ while (!in_aborting) {
+ Fill_the_buffer: /* need this for repeat */
+ if (in_buffer < 32) {
+ /* move the rest of buffer to pos 0 and fill the buf up */
+ if (in_buffer)
+ memcpy(buf, data, in_buffer);
+ data = buf;
+ if ((l = safe_read(fd, buf + in_buffer, chunk_bytes - in_buffer)) > 0)
+ in_buffer += l;
+ else if (!in_buffer) {
+ /* the file is truncated, so simulate 'Terminator'
+ and reduce the datablock for safe landing */
+ nextblock = buf[0] = 0;
+ if (l == -1) {
+ perror(name);
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ }
+ while (!nextblock) { /* this is a new block */
+ if (in_buffer < sizeof(VocBlockType))
+ goto __end;
+ bp = (VocBlockType *) data;
+ COUNT1(sizeof(VocBlockType));
+ nextblock = VOC_DATALEN(bp);
+ if (output && !quiet_mode)
+ fprintf(stderr, "\n"); /* write /n after ASCII-out */
+ output = 0;
+ switch (bp->type) {
+ case 0:
+#if 0
+ d_printf("Terminator\n");
+#endif
+ return; /* VOC-file stop */
+ case 1:
+ vd = (VocVoiceData *) data;
+ COUNT1(sizeof(VocVoiceData));
+ /* we need a SYNC, before we can set new SPEED, STEREO ... */
+
+ if (!was_extended) {
+ hwparams.rate = (int) (vd->tc);
+ hwparams.rate = 1000000 / (256 - hwparams.rate);
+#if 0
+ d_printf("Channel data %d Hz\n", dsp_speed);
+#endif
+ if (vd->pack) { /* /dev/dsp can't it */
+ error(_("can't play packed .voc files"));
+ return;
+ }
+ if (hwparams.channels == 2) /* if we are in Stereo-Mode, switch back */
+ hwparams.channels = 1;
+ } else { /* there was extended block */
+ hwparams.channels = 2;
+ was_extended = 0;
+ }
+ set_params();
+ break;
+ case 2: /* nothing to do, pure data */
+#if 0
+ d_printf("Channel continuation\n");
+#endif
+ break;
+ case 3: /* a silence block, no data, only a count */
+ sp = (u_short *) data;
+ COUNT1(sizeof(u_short));
+ hwparams.rate = (int) (*data);
+ COUNT1(1);
+ hwparams.rate = 1000000 / (256 - hwparams.rate);
+ set_params();
+#if 0
+ {
+ size_t silence;
+ silence = (((size_t) * sp) * 1000) / hwparams.rate;
+ d_printf("Silence for %d ms\n", (int) silence);
+ }
+#endif
+ voc_write_silence(*sp);
+ break;
+ case 4: /* a marker for syncronisation, no effect */
+ sp = (u_short *) data;
+ COUNT1(sizeof(u_short));
+#if 0
+ d_printf("Marker %d\n", *sp);
+#endif
+ break;
+ case 5: /* ASCII text, we copy to stderr */
+ output = 1;
+#if 0
+ d_printf("ASCII - text :\n");
+#endif
+ break;
+ case 6: /* repeat marker, says repeatcount */
+ /* my specs don't say it: maybe this can be recursive, but
+ I don't think somebody use it */
+ repeat = *(u_short *) data;
+ COUNT1(sizeof(u_short));
+#if 0
+ d_printf("Repeat loop %d times\n", repeat);
+#endif
+ if (filepos >= 0) { /* if < 0, one seek fails, why test another */
+ if ((filepos = lseek64(fd, 0, 1)) < 0) {
+ error(_("can't play loops; %s isn't seekable\n"), name);
+ repeat = 0;
+ } else {
+ filepos -= in_buffer; /* set filepos after repeat */
+ }
+ } else {
+ repeat = 0;
+ }
+ break;
+ case 7: /* ok, lets repeat that be rewinding tape */
+ if (repeat) {
+ if (repeat != 0xFFFF) {
+#if 0
+ d_printf("Repeat loop %d\n", repeat);
+#endif
+ --repeat;
+ }
+#if 0
+ else
+ d_printf("Neverending loop\n");
+#endif
+ lseek64(fd, filepos, 0);
+ in_buffer = 0; /* clear the buffer */
+ goto Fill_the_buffer;
+ }
+#if 0
+ else
+ d_printf("End repeat loop\n");
+#endif
+ break;
+ case 8: /* the extension to play Stereo, I have SB 1.0 :-( */
+ was_extended = 1;
+ eb = (VocExtBlock *) data;
+ COUNT1(sizeof(VocExtBlock));
+ hwparams.rate = (int) (eb->tc);
+ hwparams.rate = 256000000L / (65536 - hwparams.rate);
+ hwparams.channels = eb->mode == VOC_MODE_STEREO ? 2 : 1;
+ if (hwparams.channels == 2)
+ hwparams.rate = hwparams.rate >> 1;
+ if (eb->pack) { /* /dev/dsp can't it */
+ error(_("can't play packed .voc files"));
+ return;
+ }
+#if 0
+ d_printf("Extended block %s %d Hz\n",
+ (eb->mode ? "Stereo" : "Mono"), dsp_speed);
+#endif
+ break;
+ default:
+ error(_("unknown blocktype %d. terminate."), bp->type);
+ return;
+ } /* switch (bp->type) */
+ } /* while (! nextblock) */
+ /* put nextblock data bytes to dsp */
+ l = in_buffer;
+ if (nextblock < (size_t)l)
+ l = nextblock;
+ if (l) {
+ if (output && !quiet_mode) {
+ if (write(2, data, l) != l) { /* to stderr */
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ } else {
+ if (voc_pcm_write(data, l) != l) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ COUNT(l);
+ }
+ } /* while(1) */
+ __end:
+ voc_pcm_flush();
+ free(buf);
+}
+/* that was a big one, perhaps somebody split it :-) */
+
+/* setting the globals for playing raw data */
+static void init_raw_data(void)
+{
+ hwparams = rhwparams;
+}
+
+/* calculate the data count to read from/to dsp */
+static off64_t calc_count(void)
+{
+ off64_t count;
+
+ if (timelimit == 0) {
+ count = pbrec_count;
+ } else {
+ count = snd_pcm_format_size(hwparams.format, hwparams.rate * hwparams.channels);
+ count *= (off64_t)timelimit;
+ }
+ return count < pbrec_count ? count : pbrec_count;
+}
+
+/* write a .VOC-header */
+static void begin_voc(int fd, size_t cnt)
+{
+ VocHeader vh;
+ VocBlockType bt;
+ VocVoiceData vd;
+ VocExtBlock eb;
+
+ memcpy(vh.magic, VOC_MAGIC_STRING, 20);
+ vh.headerlen = LE_SHORT(sizeof(VocHeader));
+ vh.version = LE_SHORT(VOC_ACTUAL_VERSION);
+ vh.coded_ver = LE_SHORT(0x1233 - VOC_ACTUAL_VERSION);
+
+ if (write(fd, &vh, sizeof(VocHeader)) != sizeof(VocHeader)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (hwparams.channels > 1) {
+ /* write an extended block */
+ bt.type = 8;
+ bt.datalen = 4;
+ bt.datalen_m = bt.datalen_h = 0;
+ if (write(fd, &bt, sizeof(VocBlockType)) != sizeof(VocBlockType)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ eb.tc = LE_SHORT(65536 - 256000000L / (hwparams.rate << 1));
+ eb.pack = 0;
+ eb.mode = 1;
+ if (write(fd, &eb, sizeof(VocExtBlock)) != sizeof(VocExtBlock)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ bt.type = 1;
+ cnt += sizeof(VocVoiceData); /* Channel_data block follows */
+ bt.datalen = (u_char) (cnt & 0xFF);
+ bt.datalen_m = (u_char) ((cnt & 0xFF00) >> 8);
+ bt.datalen_h = (u_char) ((cnt & 0xFF0000) >> 16);
+ if (write(fd, &bt, sizeof(VocBlockType)) != sizeof(VocBlockType)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ vd.tc = (u_char) (256 - (1000000 / hwparams.rate));
+ vd.pack = 0;
+ if (write(fd, &vd, sizeof(VocVoiceData)) != sizeof(VocVoiceData)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+}
+
+/* write a WAVE-header */
+static void begin_wave(int fd, size_t cnt)
+{
+ WaveHeader h;
+ WaveFmtBody f;
+ WaveChunkHeader cf, cd;
+ int bits;
+ u_int tmp;
+ u_short tmp2;
+
+ /* WAVE cannot handle greater than 32bit (signed?) int */
+ if (cnt == (size_t)-2)
+ cnt = 0x7fffff00;
+
+ bits = 8;
+ switch ((unsigned long) hwparams.format) {
+ case SND_PCM_FORMAT_U8:
+ bits = 8;
+ break;
+ case SND_PCM_FORMAT_S16_LE:
+ bits = 16;
+ break;
+ case SND_PCM_FORMAT_S32_LE:
+ case SND_PCM_FORMAT_FLOAT_LE:
+ bits = 32;
+ break;
+ case SND_PCM_FORMAT_S24_LE:
+ case SND_PCM_FORMAT_S24_3LE:
+ bits = 24;
+ break;
+ default:
+ error(_("Wave doesn't support %s format..."), snd_pcm_format_name(hwparams.format));
+ prg_exit(EXIT_FAILURE);
+ }
+ h.magic = WAV_RIFF;
+ tmp = cnt + sizeof(WaveHeader) + sizeof(WaveChunkHeader) + sizeof(WaveFmtBody) + sizeof(WaveChunkHeader) - 8;
+ h.length = LE_INT(tmp);
+ h.type = WAV_WAVE;
+
+ cf.type = WAV_FMT;
+ cf.length = LE_INT(16);
+
+ if (hwparams.format == SND_PCM_FORMAT_FLOAT_LE)
+ f.format = LE_SHORT(WAV_FMT_IEEE_FLOAT);
+ else
+ f.format = LE_SHORT(WAV_FMT_PCM);
+ f.channels = LE_SHORT(hwparams.channels);
+ f.sample_fq = LE_INT(hwparams.rate);
+#if 0
+ tmp2 = (samplesize == 8) ? 1 : 2;
+ f.byte_p_spl = LE_SHORT(tmp2);
+ tmp = dsp_speed * hwparams.channels * (u_int) tmp2;
+#else
+ tmp2 = hwparams.channels * snd_pcm_format_physical_width(hwparams.format) / 8;
+ f.byte_p_spl = LE_SHORT(tmp2);
+ tmp = (u_int) tmp2 * hwparams.rate;
+#endif
+ f.byte_p_sec = LE_INT(tmp);
+ f.bit_p_spl = LE_SHORT(bits);
+
+ cd.type = WAV_DATA;
+ cd.length = LE_INT(cnt);
+
+ if (write(fd, &h, sizeof(WaveHeader)) != sizeof(WaveHeader) ||
+ write(fd, &cf, sizeof(WaveChunkHeader)) != sizeof(WaveChunkHeader) ||
+ write(fd, &f, sizeof(WaveFmtBody)) != sizeof(WaveFmtBody) ||
+ write(fd, &cd, sizeof(WaveChunkHeader)) != sizeof(WaveChunkHeader)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+}
+
+/* write a Au-header */
+static void begin_au(int fd, size_t cnt)
+{
+ AuHeader ah;
+
+ ah.magic = AU_MAGIC;
+ ah.hdr_size = BE_INT(24);
+ ah.data_size = BE_INT(cnt);
+ switch ((unsigned long) hwparams.format) {
+ case SND_PCM_FORMAT_MU_LAW:
+ ah.encoding = BE_INT(AU_FMT_ULAW);
+ break;
+ case SND_PCM_FORMAT_U8:
+ ah.encoding = BE_INT(AU_FMT_LIN8);
+ break;
+ case SND_PCM_FORMAT_S16_BE:
+ ah.encoding = BE_INT(AU_FMT_LIN16);
+ break;
+ default:
+ error(_("Sparc Audio doesn't support %s format..."), snd_pcm_format_name(hwparams.format));
+ prg_exit(EXIT_FAILURE);
+ }
+ ah.sample_rate = BE_INT(hwparams.rate);
+ ah.channels = BE_INT(hwparams.channels);
+ if (write(fd, &ah, sizeof(AuHeader)) != sizeof(AuHeader)) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+}
+
+/* closing .VOC */
+static void end_voc(int fd)
+{
+ off64_t length_seek;
+ VocBlockType bt;
+ size_t cnt;
+ char dummy = 0; /* Write a Terminator */
+
+ if (write(fd, &dummy, 1) != 1) {
+ error(_("write error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ length_seek = sizeof(VocHeader);
+ if (hwparams.channels > 1)
+ length_seek += sizeof(VocBlockType) + sizeof(VocExtBlock);
+ bt.type = 1;
+ cnt = fdcount;
+ cnt += sizeof(VocVoiceData); /* Channel_data block follows */
+ if (cnt > 0x00ffffff)
+ cnt = 0x00ffffff;
+ bt.datalen = (u_char) (cnt & 0xFF);
+ bt.datalen_m = (u_char) ((cnt & 0xFF00) >> 8);
+ bt.datalen_h = (u_char) ((cnt & 0xFF0000) >> 16);
+ if (lseek64(fd, length_seek, SEEK_SET) == length_seek)
+ write(fd, &bt, sizeof(VocBlockType));
+ if (fd != 1)
+ close(fd);
+}
+
+static void end_wave(int fd)
+{ /* only close output */
+ WaveChunkHeader cd;
+ off64_t length_seek;
+ off64_t filelen;
+ u_int rifflen;
+
+ length_seek = sizeof(WaveHeader) +
+ sizeof(WaveChunkHeader) +
+ sizeof(WaveFmtBody);
+ cd.type = WAV_DATA;
+ cd.length = fdcount > 0x7fffffff ? LE_INT(0x7fffffff) : LE_INT(fdcount);
+ filelen = fdcount + 2*sizeof(WaveChunkHeader) + sizeof(WaveFmtBody) + 4;
+ rifflen = filelen > 0x7fffffff ? LE_INT(0x7fffffff) : LE_INT(filelen);
+ if (lseek64(fd, 4, SEEK_SET) == 4)
+ write(fd, &rifflen, 4);
+ if (lseek64(fd, length_seek, SEEK_SET) == length_seek)
+ write(fd, &cd, sizeof(WaveChunkHeader));
+ if (fd != 1)
+ close(fd);
+}
+
+static void end_au(int fd)
+{ /* only close output */
+ AuHeader ah;
+ off64_t length_seek;
+
+ length_seek = (char *)&ah.data_size - (char *)&ah;
+ ah.data_size = fdcount > 0xffffffff ? 0xffffffff : BE_INT(fdcount);
+ if (lseek64(fd, length_seek, SEEK_SET) == length_seek)
+ write(fd, &ah.data_size, sizeof(ah.data_size));
+ if (fd != 1)
+ close(fd);
+}
+
+static void header(int rtype, char *name)
+{
+ if (!quiet_mode) {
+ if (! name)
+ name = (stream == SND_PCM_STREAM_PLAYBACK) ? "stdout" : "stdin";
+ fprintf(stderr, "%s %s '%s' : ",
+ (stream == SND_PCM_STREAM_PLAYBACK) ? _("Playing") : _("Recording"),
+ gettext(fmt_rec_table[rtype].what),
+ name);
+ fprintf(stderr, "%s, ", snd_pcm_format_description(hwparams.format));
+ fprintf(stderr, _("Rate %d Hz, "), hwparams.rate);
+ if (hwparams.channels == 1)
+ fprintf(stderr, _("Mono"));
+ else if (hwparams.channels == 2)
+ fprintf(stderr, _("Stereo"));
+ else
+ fprintf(stderr, _("Channels %i"), hwparams.channels);
+ fprintf(stderr, "\n");
+ }
+}
+
+/* playing raw data */
+
+static void playback_go(int fd, size_t loaded, off64_t count, int rtype, char *name)
+{
+ int l, r;
+ off64_t written = 0;
+ off64_t c;
+
+ header(rtype, name);
+ set_params();
+
+ while (loaded > chunk_bytes && written < count && !in_aborting) {
+ if (pcm_write(audiobuf + written, chunk_size) <= 0)
+ return;
+ written += chunk_bytes;
+ loaded -= chunk_bytes;
+ }
+ if (written > 0 && loaded > 0)
+ memmove(audiobuf, audiobuf + written, loaded);
+
+ l = loaded;
+ while (written < count && !in_aborting) {
+ do {
+ c = count - written;
+ if (c > chunk_bytes)
+ c = chunk_bytes;
+ c -= l;
+
+ if (c == 0)
+ break;
+ r = safe_read(fd, audiobuf + l, c);
+ if (r < 0) {
+ perror(name);
+ prg_exit(EXIT_FAILURE);
+ }
+ fdcount += r;
+ if (r == 0)
+ break;
+ l += r;
+ } while ((size_t)l < chunk_bytes);
+ l = l * 8 / bits_per_frame;
+ r = pcm_write(audiobuf, l);
+ if (r != l)
+ break;
+ r = r * bits_per_frame / 8;
+ written += r;
+ l = 0;
+ }
+ snd_pcm_nonblock(handle, 0);
+ snd_pcm_drain(handle);
+ snd_pcm_nonblock(handle, nonblock);
+}
+
+
+/*
+ * let's play or capture it (capture_type says VOC/WAVE/raw)
+ */
+
+static void playback(char *name)
+{
+ int ofs;
+ size_t dta;
+ ssize_t dtawave;
+
+ pbrec_count = LLONG_MAX;
+ fdcount = 0;
+ if (!name || !strcmp(name, "-")) {
+ fd = fileno(stdin);
+ name = "stdin";
+ } else {
+ init_stdin();
+ if ((fd = open(name, O_RDONLY, 0)) == -1) {
+ perror(name);
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ /* read the file header */
+ dta = sizeof(AuHeader);
+ if ((size_t)safe_read(fd, audiobuf, dta) != dta) {
+ error(_("read error"));
+ prg_exit(EXIT_FAILURE);
+ }
+ if (test_au(fd, audiobuf) >= 0) {
+ rhwparams.format = hwparams.format;
+ pbrec_count = calc_count();
+ playback_go(fd, 0, pbrec_count, FORMAT_AU, name);
+ goto __end;
+ }
+ dta = sizeof(VocHeader);
+ if ((size_t)safe_read(fd, audiobuf + sizeof(AuHeader),
+ dta - sizeof(AuHeader)) != dta - sizeof(AuHeader)) {
+ error(_("read error"));
+ prg_exit(EXIT_FAILURE);;
+ }
+ if ((ofs = test_vocfile(audiobuf)) >= 0) {
+ pbrec_count = calc_count();
+ voc_play(fd, ofs, name);
+ goto __end;
+ }
+ /* read bytes for WAVE-header */
+ if ((dtawave = test_wavefile(fd, audiobuf, dta)) >= 0) {
+ pbrec_count = calc_count();
+ playback_go(fd, dtawave, pbrec_count, FORMAT_WAVE, name);
+ } else {
+ /* should be raw data */
+ init_raw_data();
+ pbrec_count = calc_count();
+ playback_go(fd, dta, pbrec_count, FORMAT_RAW, name);
+ }
+ __end:
+ if (fd != 0)
+ close(fd);
+}
+
+/**
+ * mystrftime
+ *
+ * Variant of strftime(3) that supports additional format
+ * specifiers in the format string.
+ *
+ * Parameters:
+ *
+ * s - destination string
+ * max - max number of bytes to write
+ * userformat - format string
+ * tm - time information
+ * filenumber - the number of the file, starting at 1
+ *
+ * Returns: number of bytes written to the string s
+ */
+size_t mystrftime(char *s, size_t max, const char *userformat,
+ const struct tm *tm, const int filenumber)
+{
+ char formatstring[PATH_MAX] = "";
+ char tempstring[PATH_MAX] = "";
+ char *format, *tempstr;
+ const char *pos_userformat;
+
+ format = formatstring;
+
+ /* if mystrftime is called with userformat = NULL we return a zero length string */
+ if (userformat == NULL) {
+ *s = '\0';
+ return 0;
+ }
+
+ for (pos_userformat = userformat; *pos_userformat; ++pos_userformat) {
+ if (*pos_userformat == '%') {
+ tempstr = tempstring;
+ tempstr[0] = '\0';
+ switch (*++pos_userformat) {
+
+ case '\0': // end of string
+ --pos_userformat;
+ break;
+
+ case 'v': // file number
+ sprintf(tempstr, "%02d", filenumber);
+ break;
+
+ default: // All other codes will be handled by strftime
+ *format++ = '%';
+ *format++ = *pos_userformat;
+ continue;
+ }
+
+ /* If a format specifier was found and used, copy the result. */
+ if (tempstr[0]) {
+ while ((*format = *tempstr++) != '\0')
+ ++format;
+ continue;
+ }
+ }
+
+ /* For any other character than % we simply copy the character */
+ *format++ = *pos_userformat;
+ }
+
+ *format = '\0';
+ format = formatstring;
+ return strftime(s, max, format, tm);
+}
+
+static int new_capture_file(char *name, char *namebuf, size_t namelen,
+ int filecount)
+{
+ char *s;
+ char buf[PATH_MAX+1];
+ time_t t;
+ struct tm *tmp;
+
+ if (use_strftime) {
+ t = time(NULL);
+ tmp = localtime(&t);
+ if (tmp == NULL) {
+ perror("localtime");
+ prg_exit(EXIT_FAILURE);
+ }
+ if (mystrftime(namebuf, namelen, name, tmp, filecount+1) == 0) {
+ fprintf(stderr, "mystrftime returned 0");
+ prg_exit(EXIT_FAILURE);
+ }
+ return filecount;
+ }
+
+ /* get a copy of the original filename */
+ strncpy(buf, name, sizeof(buf));
+
+ /* separate extension from filename */
+ s = buf + strlen(buf);
+ while (s > buf && *s != '.' && *s != '/')
+ --s;
+ if (*s == '.')
+ *s++ = 0;
+ else if (*s == '/')
+ s = buf + strlen(buf);
+
+ /* upon first jump to this if block rename the first file */
+ if (filecount == 1) {
+ if (*s)
+ snprintf(namebuf, namelen, "%s-01.%s", buf, s);
+ else
+ snprintf(namebuf, namelen, "%s-01", buf);
+ remove(namebuf);
+ rename(name, namebuf);
+ filecount = 2;
+ }
+
+ /* name of the current file */
+ if (*s)
+ snprintf(namebuf, namelen, "%s-%02i.%s", buf, filecount, s);
+ else
+ snprintf(namebuf, namelen, "%s-%02i", buf, filecount);
+
+ return filecount;
+}
+
+/**
+ * create_path
+ *
+ * This function creates a file path, like mkdir -p.
+ *
+ * Parameters:
+ *
+ * path - the path to create
+ *
+ * Returns: 0 on success, -1 on failure
+ * On failure, a message has been printed to stderr.
+ */
+int create_path(const char *path)
+{
+ char *start;
+ mode_t mode = S_IRWXU | S_IRGRP | S_IXGRP | S_IROTH | S_IXOTH;
+
+ if (path[0] == '/')
+ start = strchr(path + 1, '/');
+ else
+ start = strchr(path, '/');
+
+ while (start) {
+ char *buffer = strdup(path);
+ buffer[start-path] = 0x00;
+
+ if (mkdir(buffer, mode) == -1 && errno != EEXIST) {
+ fprintf(stderr, "Problem creating directory %s", buffer);
+ perror(" ");
+ free(buffer);
+ return -1;
+ }
+ free(buffer);
+ start = strchr(start + 1, '/');
+ }
+ return 0;
+}
+
+static int safe_open(const char *name)
+{
+ int fd;
+
+ fd = open(name, O_WRONLY | O_CREAT, 0644);
+ if (fd == -1) {
+ if (errno != ENOENT || !use_strftime)
+ return -1;
+ if (create_path(name) == 0)
+ fd = open(name, O_WRONLY | O_CREAT, 0644);
+ }
+ return fd;
+}
+
+static void capture(char *orig_name)
+{
+ int tostdout=0; /* boolean which describes output stream */
+ int filecount=0; /* number of files written */
+ char *name = orig_name; /* current filename */
+ char namebuf[PATH_MAX+1];
+ off64_t count, rest; /* number of bytes to capture */
+
+ /* get number of bytes to capture */
+ count = calc_count();
+ if (count == 0)
+ count = LLONG_MAX;
+ /* compute the number of bytes per file */
+ max_file_size = max_file_time *
+ snd_pcm_format_size(hwparams.format,
+ hwparams.rate * hwparams.channels);
+ /* WAVE-file should be even (I'm not sure), but wasting one byte
+ isn't a problem (this can only be in 8 bit mono) */
+ if (count < LLONG_MAX)
+ count += count % 2;
+ else
+ count -= count % 2;
+
+ /* display verbose output to console */
+ header(file_type, name);
+
+ /* setup sound hardware */
+ set_params();
+
+ /* write to stdout? */
+ if (!name || !strcmp(name, "-")) {
+ fd = fileno(stdout);
+ name = "stdout";
+ tostdout=1;
+ if (count > fmt_rec_table[file_type].max_filesize)
+ count = fmt_rec_table[file_type].max_filesize;
+ }
+ init_stdin();
+
+ do {
+ /* open a file to write */
+ if(!tostdout) {
+ /* upon the second file we start the numbering scheme */
+ if (filecount || use_strftime) {
+ filecount = new_capture_file(orig_name, namebuf,
+ sizeof(namebuf),
+ filecount);
+ name = namebuf;
+ }
+
+ /* open a new file */
+ remove(name);
+ fd = safe_open(name);
+ if (fd < 0) {
+ perror(name);
+ prg_exit(EXIT_FAILURE);
+ }
+ filecount++;
+ }
+
+ rest = count;
+ if (rest > fmt_rec_table[file_type].max_filesize)
+ rest = fmt_rec_table[file_type].max_filesize;
+ if (max_file_size && (rest > max_file_size))
+ rest = max_file_size;
+
+ /* setup sample header */
+ if (fmt_rec_table[file_type].start)
+ fmt_rec_table[file_type].start(fd, rest);
+
+ /* capture */
+ fdcount = 0;
+ while (rest > 0 && recycle_capture_file == 0 && !in_aborting) {
+ size_t c = (rest <= (off64_t)chunk_bytes) ?
+ (size_t)rest : chunk_bytes;
+ size_t f = c * 8 / bits_per_frame;
+ if (pcm_read(audiobuf, f) != f)
+ break;
+ if (write(fd, audiobuf, c) != c) {
+ perror(name);
+ prg_exit(EXIT_FAILURE);
+ }
+ count -= c;
+ rest -= c;
+ fdcount += c;
+ }
+
+ /* re-enable SIGUSR1 signal */
+ if (recycle_capture_file) {
+ recycle_capture_file = 0;
+ signal(SIGUSR1, signal_handler_recycle);
+ }
+
+ /* finish sample container */
+ if (fmt_rec_table[file_type].end && !tostdout) {
+ fmt_rec_table[file_type].end(fd);
+ fd = -1;
+ }
+
+ if (in_aborting)
+ break;
+
+ /* repeat the loop when format is raw without timelimit or
+ * requested counts of data are recorded
+ */
+ } while ((file_type == FORMAT_RAW && !timelimit) || count > 0);
+}
+
+static void playbackv_go(int* fds, unsigned int channels, size_t loaded, off64_t count, int rtype, char **names)
+{
+ int r;
+ size_t vsize;
+
+ unsigned int channel;
+ u_char *bufs[channels];
+
+ header(rtype, names[0]);
+ set_params();
+
+ vsize = chunk_bytes / channels;
+
+ // Not yet implemented
+ assert(loaded == 0);
+
+ for (channel = 0; channel < channels; ++channel)
+ bufs[channel] = audiobuf + vsize * channel;
+
+ while (count > 0 && !in_aborting) {
+ size_t c = 0;
+ size_t expected = count / channels;
+ if (expected > vsize)
+ expected = vsize;
+ do {
+ r = safe_read(fds[0], bufs[0], expected);
+ if (r < 0) {
+ perror(names[channel]);
+ prg_exit(EXIT_FAILURE);
+ }
+ for (channel = 1; channel < channels; ++channel) {
+ if (safe_read(fds[channel], bufs[channel], r) != r) {
+ perror(names[channel]);
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ if (r == 0)
+ break;
+ c += r;
+ } while (c < expected);
+ c = c * 8 / bits_per_sample;
+ r = pcm_writev(bufs, channels, c);
+ if ((size_t)r != c)
+ break;
+ r = r * bits_per_frame / 8;
+ count -= r;
+ }
+ snd_pcm_nonblock(handle, 0);
+ snd_pcm_drain(handle);
+ snd_pcm_nonblock(handle, nonblock);
+}
+
+static void capturev_go(int* fds, unsigned int channels, off64_t count, int rtype, char **names)
+{
+ size_t c;
+ ssize_t r;
+ unsigned int channel;
+ size_t vsize;
+ u_char *bufs[channels];
+
+ header(rtype, names[0]);
+ set_params();
+
+ vsize = chunk_bytes / channels;
+
+ for (channel = 0; channel < channels; ++channel)
+ bufs[channel] = audiobuf + vsize * channel;
+
+ while (count > 0 && !in_aborting) {
+ size_t rv;
+ c = count;
+ if (c > chunk_bytes)
+ c = chunk_bytes;
+ c = c * 8 / bits_per_frame;
+ if ((size_t)(r = pcm_readv(bufs, channels, c)) != c)
+ break;
+ rv = r * bits_per_sample / 8;
+ for (channel = 0; channel < channels; ++channel) {
+ if ((size_t)write(fds[channel], bufs[channel], rv) != rv) {
+ perror(names[channel]);
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+ r = r * bits_per_frame / 8;
+ count -= r;
+ fdcount += r;
+ }
+}
+
+static void playbackv(char **names, unsigned int count)
+{
+ int ret = 0;
+ unsigned int channel;
+ unsigned int channels = rhwparams.channels;
+ int alloced = 0;
+ int fds[channels];
+ for (channel = 0; channel < channels; ++channel)
+ fds[channel] = -1;
+
+ if (count == 1 && channels > 1) {
+ size_t len = strlen(names[0]);
+ char format[1024];
+ memcpy(format, names[0], len);
+ strcpy(format + len, ".%d");
+ len += 4;
+ names = malloc(sizeof(*names) * channels);
+ for (channel = 0; channel < channels; ++channel) {
+ names[channel] = malloc(len);
+ sprintf(names[channel], format, channel);
+ }
+ alloced = 1;
+ } else if (count != channels) {
+ error(_("You need to specify %d files"), channels);
+ prg_exit(EXIT_FAILURE);
+ }
+
+ for (channel = 0; channel < channels; ++channel) {
+ fds[channel] = open(names[channel], O_RDONLY, 0);
+ if (fds[channel] < 0) {
+ perror(names[channel]);
+ ret = EXIT_FAILURE;
+ goto __end;
+ }
+ }
+ /* should be raw data */
+ init_raw_data();
+ pbrec_count = calc_count();
+ playbackv_go(fds, channels, 0, pbrec_count, FORMAT_RAW, names);
+
+ __end:
+ for (channel = 0; channel < channels; ++channel) {
+ if (fds[channel] >= 0)
+ close(fds[channel]);
+ if (alloced)
+ free(names[channel]);
+ }
+ if (alloced)
+ free(names);
+ if (ret)
+ prg_exit(ret);
+}
+
+static void capturev(char **names, unsigned int count)
+{
+ int ret = 0;
+ unsigned int channel;
+ unsigned int channels = rhwparams.channels;
+ int alloced = 0;
+ int fds[channels];
+ for (channel = 0; channel < channels; ++channel)
+ fds[channel] = -1;
+
+ if (count == 1) {
+ size_t len = strlen(names[0]);
+ char format[1024];
+ memcpy(format, names[0], len);
+ strcpy(format + len, ".%d");
+ len += 4;
+ names = malloc(sizeof(*names) * channels);
+ for (channel = 0; channel < channels; ++channel) {
+ names[channel] = malloc(len);
+ sprintf(names[channel], format, channel);
+ }
+ alloced = 1;
+ } else if (count != channels) {
+ error(_("You need to specify %d files"), channels);
+ prg_exit(EXIT_FAILURE);
+ }
+
+ for (channel = 0; channel < channels; ++channel) {
+ fds[channel] = open(names[channel], O_WRONLY + O_CREAT, 0644);
+ if (fds[channel] < 0) {
+ perror(names[channel]);
+ ret = EXIT_FAILURE;
+ goto __end;
+ }
+ }
+ /* should be raw data */
+ init_raw_data();
+ pbrec_count = calc_count();
+ capturev_go(fds, channels, pbrec_count, FORMAT_RAW, names);
+
+ __end:
+ for (channel = 0; channel < channels; ++channel) {
+ if (fds[channel] >= 0)
+ close(fds[channel]);
+ if (alloced)
+ free(names[channel]);
+ }
+ if (alloced)
+ free(names);
+ if (ret)
+ prg_exit(ret);
+}
diff --git a/aplay/arecord.1 b/aplay/arecord.1
new file mode 100644
index 0000000..2945dad
--- /dev/null
+++ b/aplay/arecord.1
@@ -0,0 +1,263 @@
+.TH APLAY 1 "1 January 2010"
+.SH NAME
+arecord, aplay \- command\-line sound recorder and player for ALSA
+soundcard driver
+.SH SYNOPSIS
+\fBarecord\fP [\fIflags\fP] [filename]
+.br
+\fBaplay\fP [\fIflags\fP] [filename [filename]] ...
+
+.SH DESCRIPTION
+\fBarecord\fP is a command\-line soundfile recorder for the ALSA soundcard
+driver. It supports several file formats and multiple soundcards with
+multiple devices. If recording with interleaved mode samples the file is
+automatically split before the 2GB filesize.
+
+\fBaplay\fP is much the same, only it plays instead of recording. For
+supported soundfile formats, the sampling rate, bit depth, and so
+forth can be automatically determined from the soundfile header.
+
+If filename is not specified, the standard output or input is used. The \fBaplay\fP utility accepts multiple filenames.
+
+.SH OPTIONS
+.TP
+\fI\-h, \-\-help\fP
+Help: show syntax.
+.TP
+\fI\-\-version\fP
+Print current version.
+.TP
+\fI\-l, \-\-list\-devices\fP
+List all soundcards and digital audio devices
+.TP
+\fI\-L, \-\-list\-pcms\fP
+List all PCMs defined
+.TP
+\fI\-D, \-\-device=NAME\fP
+Select PCM by name
+.TP
+\fI\-q \-\-quiet\fP
+Quiet mode. Suppress messages (not sound :))
+.TP
+\fI\-t, \-\-file\-type TYPE\fP
+File type (voc, wav, raw or au).
+If this parameter is omitted the WAVE format is used.
+.TP
+\fI\-c, \-\-channels=#\fP
+The number of channels.
+The default is one channel.
+Valid values are 1 through 32.
+.TP
+\fI\-f \-\-format=FORMAT\fP
+Sample format
+.br
+Recognized sample formats are: S8 U8 S16_LE S16_BE U16_LE U16_BE S24_LE
+S24_BE U24_LE U24_BE S32_LE S32_BE U32_LE U32_BE FLOAT_LE FLOAT_BE
+FLOAT64_LE FLOAT64_BE IEC958_SUBFRAME_LE IEC958_SUBFRAME_BE MU_LAW
+A_LAW IMA_ADPCM MPEG GSM SPECIAL S24_3LE S24_3BE U24_3LE U24_3BE S20_3LE
+S20_3BE U20_3LE U20_3BE S18_3LE S18_3BE U18_3LE
+.br
+Some of these may not be available on selected hardware
+.br
+The available format shortcuts are:
+.nf
+\-f cd (16 bit little endian, 44100, stereo) [\-f S16_LE \-c2 \-r44100]
+\-f cdr (16 bit big endian, 44100, stereo) [\-f S16_BE \-c2 \-f44100]
+\-f dat (16 bit little endian, 48000, stereo) [\-f S16_LE \-c2 \-r48000]
+.fi
+If no format is given U8 is used.
+.TP
+\fI\-r, \-\-rate=#<Hz>\fP
+Sampling rate in Hertz. The default rate is 8000 Hertz.
+If the value specified is less than 300, it is taken as the rate in kilohertz.
+Valid values are 2000 through 192000 Hertz.
+.TP
+\fI\-d, \-\-duration=#\fP
+Interrupt after # seconds.
+A value of zero means infinity.
+The default is zero, so if this option is omitted then the arecord process will run until it is killed.
+.TP
+\fI\-s, \-\-sleep\-min=#\fP
+Min ticks to sleep. The default is not to sleep.
+.TP
+\fI\-M, \-\-mmap\fP
+Use memory\-mapped (mmap) I/O mode for the audio stream.
+If this option is not set, the read/write I/O mode will be used.
+.TP
+\fI\-N, \-\-nonblock\fP
+Open the audio device in non\-blocking mode. If the device is busy the program will exit immediately.
+If this option is not set the program will block until the audio device is available again.
+.TP
+\fI\-F, \-\-period\-time=#\fP
+Distance between interrupts is # microseconds.
+If no period time and no period size is given then a quarter of the buffer time is set.
+.TP
+\fI\-B, \-\-buffer\-time=#\fP
+Buffer duration is # microseconds
+If no buffer time and no buffer size is given then the maximal allowed buffer time but not more than 500ms is set.
+.TP
+\fI\-\-period\-size=#\fP
+Distance between interrupts is # frames
+If no period size and no period time is given then a quarter of the buffer size is set.
+.TP
+\fI\-\-buffer\-size=#\fP
+Buffer duration is # frames
+If no buffer time and no buffer size is given then the maximal allowed buffer time but not more than 500ms is set.
+.TP
+\fI\-A, \-\-avail\-min=#\fP
+Min available space for wakeup is # microseconds
+.TP
+\fI\-R, \-\-start\-delay=#\fP
+Delay for automatic PCM start is # microseconds
+(relative to buffer size if <= 0)
+.TP
+\fI\-T, \-\-stop\-delay=#\fP
+Delay for automatic PCM stop is # microseconds from xrun
+.TP
+\fI\-v, \-\-verbose\fP
+Show PCM structure and setup.
+This option is accumulative. The VU meter is displayed when this
+is given twice or three times.
+.TP
+\fI\-V, \-\-vumeter=TYPE\fP
+Specifies the VU\-meter type, either \fIstereo\fP or \fImono\fP.
+The stereo VU\-meter is available only for 2\-channel stereo samples
+with interleaved format.
+.TP
+\fI\-I, \-\-separate\-channels\fP
+One file for each channel. This option disables max\-file\-time
+and use\-strftime, and ignores SIGUSR1. The stereo VU meter is
+not available with separate channels.
+.TP
+\fI\-P\fP
+Playback. This is the default if the program is invoked
+by typing aplay.
+.TP
+\fI\-C\fP
+Record. This is the default if the program is invoked
+by typing arecord.
+.TP
+\fI\-i, \-\-interactive\fP
+Allow interactive operation via stdin.
+Currently only pause/resume via space or enter key is implemented.
+.TP
+\fI-m, \-\-chmap=ch1,ch2,...\fP
+Give the channel map to override or follow. Pass channel position
+strings like \fIFL\fP, \fIFR\fP, etc.
+
+If a device supports the override of the channel map, \fBaplay\fP
+tries to pass the given channel map.
+If it doesn't support the channel map override but still it provides
+the channel map information, \fBaplay\fP tries to rearrange the
+channel order in the buffer to match with the returned channel map
+from the device.
+.TP
+\fI\-\-disable\-resample\fP
+Disable automatic rate resample.
+.TP
+\fI\-\-disable\-channels\fP
+Disable automatic channel conversions.
+.TP
+\fI\-\-disable\-format\fP
+Disable automatic format conversions.
+.TP
+\fI\-\-disable\-softvol\fP
+Disable software volume control (softvol).
+.TP
+\fI\-\-test\-position\fP
+Test ring buffer position.
+.TP
+\fI\-\-test\-coef=<coef>\fP
+Test coefficient for ring buffer position; default is 8.
+Expression for validation is: coef * (buffer_size / 2).
+Minimum value is 1.
+.TP
+\fI\-\-test\-nowait\fP
+Do not wait for the ring buffer \(hy eats the whole CPU.
+.TP
+\fI\-\-max\-file\-time\fP
+While recording, when the output file has been accumulating
+sound for this long,
+close it and open a new output file. Default is the maximum
+size supported by the file format: 2 GiB for WAV files.
+This option has no effect if \-\-separate\-channels is
+specified.
+.TP
+\fI\-\-process\-id\-file <file name>\fP
+aplay writes its process ID here, so other programs can
+send signals to it.
+.TP
+\fI\-\-use\-strftime\fP
+When recording, interpret %\-codes in the file name parameter using
+the strftime facility whenever the output file is opened. The
+important strftime codes are: %Y is the year, %m month, %d day of
+the month, %H hour, %M minute and %S second. In addition, %v is
+the file number, starting at 1. When this option is specified,
+intermediate directories for the output file are created automatically.
+This option has no effect if \-\-separate\-channels is specified.
+.TP
+\fI\-\-dump\-hw\-params\fP
+Dump hw_params of the device preconfigured status to stderr. The dump
+lists capabilities of the selected device such as supported formats,
+sampling rates, numbers of channels, period and buffer bytes/sizes/times.
+For raw device hw:X this option basically lists hardware capabilities of
+the soundcard.
+.TP
+\fI\-\-fatal\-errors\fP
+Disables recovery attempts when errors (e.g. xrun) are encountered; the
+aplay process instead aborts immediately.
+
+.SH SIGNALS
+When recording, SIGINT, SIGTERM and SIGABRT will close the output
+file and exit. SIGUSR1 will close the output file, open a new one,
+and continue recording. However, SIGUSR1 does not work with
+\-\-separate\-channels.
+
+.SH EXAMPLES
+
+.TP
+\fBaplay \-c 1 \-t raw \-r 22050 \-f mu_law foobar\fR
+will play the raw file "foobar" as a
+22050\-Hz, mono, 8\-bit, Mu\-Law .au file.
+
+.TP
+\fBarecord \-d 10 \-f cd \-t wav \-D copy foobar.wav\fP
+will record foobar.wav as a 10\-second, CD\-quality wave file, using the
+PCM "copy" (which might be defined in the user's .asoundrc file as:
+.nf
+pcm.copy {
+ type plug
+ slave {
+ pcm hw
+ }
+ route_policy copy
+}
+.fi
+
+.TP
+\fBarecord \-t wav \-\-max\-file\-time 30 mon.wav\fP
+Record from the default audio source in monaural, 8,000 samples
+per second, 8 bits per sample. Start a new file every
+30 seconds. File names are mon\-nn.wav, where nn increases
+from 01. The file after mon\-99.wav is mon\-100.wav.
+
+.TP
+\fBarecord \-f cd \-t wav \-\-max\-file\-time 3600 \-\-use-strftime %Y/%m/%d/listen-%H-%M-%v.wav\fP
+Record in stereo from the default audio source. Create a new file
+every hour. The files are placed in directories based on their start dates
+and have names which include their start times and file numbers.
+
+.SH SEE ALSO
+\fB
+alsamixer(1),
+amixer(1)
+\fP
+
+.SH BUGS
+Note that .aiff files are not currently supported.
+
+.SH AUTHOR
+\fBarecord\fP and \fBaplay\fP are by Jaroslav Kysela <perex@perex.cz>
+This document is by Paul Winkler <zarmzarm@erols.com>.
+Updated for Alsa 0.9 by James Tappin <james@xena.uklinux.net>
+
diff --git a/aplay/formats.h b/aplay/formats.h
new file mode 100644
index 0000000..ac0a2b0
--- /dev/null
+++ b/aplay/formats.h
@@ -0,0 +1,134 @@
+#ifndef FORMATS_H
+#define FORMATS_H 1
+
+#include <endian.h>
+#include <byteswap.h>
+
+/* Definitions for .VOC files */
+
+#define VOC_MAGIC_STRING "Creative Voice File\x1A"
+#define VOC_ACTUAL_VERSION 0x010A
+#define VOC_SAMPLESIZE 8
+
+#define VOC_MODE_MONO 0
+#define VOC_MODE_STEREO 1
+
+#define VOC_DATALEN(bp) ((u_long)(bp->datalen) | \
+ ((u_long)(bp->datalen_m) << 8) | \
+ ((u_long)(bp->datalen_h) << 16) )
+
+typedef struct voc_header {
+ u_char magic[20]; /* must be MAGIC_STRING */
+ u_short headerlen; /* Headerlength, should be 0x1A */
+ u_short version; /* VOC-file version */
+ u_short coded_ver; /* 0x1233-version */
+} VocHeader;
+
+typedef struct voc_blocktype {
+ u_char type;
+ u_char datalen; /* low-byte */
+ u_char datalen_m; /* medium-byte */
+ u_char datalen_h; /* high-byte */
+} VocBlockType;
+
+typedef struct voc_voice_data {
+ u_char tc;
+ u_char pack;
+} VocVoiceData;
+
+typedef struct voc_ext_block {
+ u_short tc;
+ u_char pack;
+ u_char mode;
+} VocExtBlock;
+
+/* Definitions for Microsoft WAVE format */
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define COMPOSE_ID(a,b,c,d) ((a) | ((b)<<8) | ((c)<<16) | ((d)<<24))
+#define LE_SHORT(v) (v)
+#define LE_INT(v) (v)
+#define BE_SHORT(v) bswap_16(v)
+#define BE_INT(v) bswap_32(v)
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define COMPOSE_ID(a,b,c,d) ((d) | ((c)<<8) | ((b)<<16) | ((a)<<24))
+#define LE_SHORT(v) bswap_16(v)
+#define LE_INT(v) bswap_32(v)
+#define BE_SHORT(v) (v)
+#define BE_INT(v) (v)
+#else
+#error "Wrong endian"
+#endif
+
+/* Note: the following macros evaluate the parameter v twice */
+#define TO_CPU_SHORT(v, be) \
+ ((be) ? BE_SHORT(v) : LE_SHORT(v))
+#define TO_CPU_INT(v, be) \
+ ((be) ? BE_INT(v) : LE_INT(v))
+
+#define WAV_RIFF COMPOSE_ID('R','I','F','F')
+#define WAV_RIFX COMPOSE_ID('R','I','F','X')
+#define WAV_WAVE COMPOSE_ID('W','A','V','E')
+#define WAV_FMT COMPOSE_ID('f','m','t',' ')
+#define WAV_DATA COMPOSE_ID('d','a','t','a')
+
+/* WAVE fmt block constants from Microsoft mmreg.h header */
+#define WAV_FMT_PCM 0x0001
+#define WAV_FMT_IEEE_FLOAT 0x0003
+#define WAV_FMT_DOLBY_AC3_SPDIF 0x0092
+#define WAV_FMT_EXTENSIBLE 0xfffe
+
+/* Used with WAV_FMT_EXTENSIBLE format */
+#define WAV_GUID_TAG "\x00\x00\x00\x00\x10\x00\x80\x00\x00\xAA\x00\x38\x9B\x71"
+
+/* it's in chunks like .voc and AMIGA iff, but my source say there
+ are in only in this combination, so I combined them in one header;
+ it works on all WAVE-file I have
+ */
+typedef struct {
+ u_int magic; /* 'RIFF' */
+ u_int length; /* filelen */
+ u_int type; /* 'WAVE' */
+} WaveHeader;
+
+typedef struct {
+ u_short format; /* see WAV_FMT_* */
+ u_short channels;
+ u_int sample_fq; /* frequence of sample */
+ u_int byte_p_sec;
+ u_short byte_p_spl; /* samplesize; 1 or 2 bytes */
+ u_short bit_p_spl; /* 8, 12 or 16 bit */
+} WaveFmtBody;
+
+typedef struct {
+ WaveFmtBody format;
+ u_short ext_size;
+ u_short bit_p_spl;
+ u_int channel_mask;
+ u_short guid_format; /* WAV_FMT_* */
+ u_char guid_tag[14]; /* WAV_GUID_TAG */
+} WaveFmtExtensibleBody;
+
+typedef struct {
+ u_int type; /* 'data' */
+ u_int length; /* samplecount */
+} WaveChunkHeader;
+
+/* Definitions for Sparc .au header */
+
+#define AU_MAGIC COMPOSE_ID('.','s','n','d')
+
+#define AU_FMT_ULAW 1
+#define AU_FMT_LIN8 2
+#define AU_FMT_LIN16 3
+
+typedef struct au_header {
+ u_int magic; /* '.snd' */
+ u_int hdr_size; /* size of header (min 24) */
+ u_int data_size; /* size of data */
+ u_int encoding; /* see to AU_FMT_XXXX */
+ u_int sample_rate; /* sample rate */
+ u_int channels; /* number of channels (voices) */
+} AuHeader;
+
+#endif /* FORMATS */
diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..c0adba9
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1530 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-06-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ aarch64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo ${UNAME_MACHINE}-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ hexagon:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+ x86_64:VMkernel:*:*)
+ echo ${UNAME_MACHINE}-unknown-esx
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config.rpath b/config.rpath
new file mode 100755
index 0000000..17298f2
--- /dev/null
+++ b/config.rpath
@@ -0,0 +1,672 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2010 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ darwin*)
+ case $cc_basename in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ ecc*)
+ wl='-Wl,'
+ ;;
+ icc* | ifort*)
+ wl='-Wl,'
+ ;;
+ lf95*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we cannot use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | k*bsd*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case $cc_basename in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ library_names_spec='$libname.a'
+ ;;
+ aix[4-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ amigaos*)
+ library_names_spec='$libname.a'
+ ;;
+ beos*)
+ library_names_spec='$libname$shrext'
+ ;;
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ cygwin* | mingw* | pw32* | cegcc*)
+ shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ library_names_spec='$libname$shrext'
+ ;;
+ dgux*)
+ library_names_spec='$libname$shrext'
+ ;;
+ freebsd1*)
+ ;;
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
+ ;;
+ gnu*)
+ library_names_spec='$libname$shrext'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux* | k*bsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ netbsd*)
+ library_names_spec='$libname$shrext'
+ ;;
+ newsos6)
+ library_names_spec='$libname$shrext'
+ ;;
+ nto-qnx*)
+ library_names_spec='$libname$shrext'
+ ;;
+ openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ library_names_spec='$libname.a'
+ ;;
+ osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
+ ;;
+ uts4*)
+ library_names_spec='$libname$shrext'
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..6205f84
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1782 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-04-18'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | aarch64 | aarch64_be \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | be32 | be64 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | epiphany \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | open8 \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pyramid \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | we32k \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | aarch64-* | aarch64_be-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pyramid-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i386-pc
+ os=-msys
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/configure b/configure
new file mode 100755
index 0000000..a635dab
--- /dev/null
+++ b/configure
@@ -0,0 +1,10696 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="aplay/aplay.c"
+ac_default_prefix=/usr
+gt_needs=
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+ALSACTL_DAEMONSWITCH
+ALSACTL_PIDFILE_DIR
+ASOUND_STATE_DIR
+HAVE_SYSTEMD_FALSE
+HAVE_SYSTEMD_TRUE
+systemdsystemunitdir
+LIBRT
+SND_UTIL_SUBMINOR
+SND_UTIL_MINOR
+SND_UTIL_MAJOR
+SND_UTIL_VERSION
+TESTSOUND
+CURSES_CFLAGS
+CURSESLIB
+CURSESINC
+ncurses5_config
+NCURSES_LIBS
+NCURSES_CFLAGS
+ncursesw5_config
+NCURSESW_LIBS
+NCURSESW_CFLAGS
+udevrulesdir
+USE_XMLTO_FALSE
+USE_XMLTO_TRUE
+xmlto
+ALSALOOP_FALSE
+ALSALOOP_TRUE
+ALSACONF_FALSE
+ALSACONF_TRUE
+ALSAMIXER_FALSE
+ALSAMIXER_TRUE
+HAVE_SAMPLERATE_FALSE
+HAVE_SAMPLERATE_TRUE
+HAVE_SEQ_FALSE
+HAVE_SEQ_TRUE
+HAVE_RAWMIDI_FALSE
+HAVE_RAWMIDI_TRUE
+HAVE_MIXER_FALSE
+HAVE_MIXER_TRUE
+HAVE_PCM_FALSE
+HAVE_PCM_TRUE
+ALSA_LIBS
+ALSA_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+SED
+LN_S
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+EGREP
+GREP
+CPP
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_nls
+enable_dependency_tracking
+with_gnu_ld
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+with_alsa_prefix
+with_alsa_inc_prefix
+enable_alsatest
+with_librt
+enable_alsamixer
+enable_alsaconf
+enable_alsaloop
+enable_xmlto
+with_udev_rules_dir
+with_curses
+with_testsound
+enable_largefile
+with_systemdsystemunitdir
+with_asound_state_dir
+with_alsactl_pidfile_dir
+with_alsactl_daemonswitch
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+NCURSESW_CFLAGS
+NCURSESW_LIBS
+NCURSES_CFLAGS
+NCURSES_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-maintainer-mode
+ disable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --disable-nls do not use Native Language Support
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --disable-rpath do not hardcode runtime library paths
+ --disable-alsatest Do not try to compile and run a test Alsa program
+ --disable-alsamixer Disable alsamixer compilation
+ --disable-alsaconf Disable alsaconf packaging
+ --disable-alsaloop Disable alsaloop packaging
+ --disable-xmlto Disable man page creation via xmlto
+ --disable-largefile omit support for large files
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
+ --without-libintl-prefix don't search for libintl in includedir and libdir
+ --with-alsa-prefix=PFX Prefix where Alsa library is installed(optional)
+ --with-alsa-inc-prefix=PFX Prefix where include libraries are (optional)
+ --with-librt Use librt for monotonic clock (default = yes)
+ --with-udev-rules-dir Directory where to install udev rules to (defaults
+ to /lib/udev/rules.d)
+ --with-curses=libname Specify the curses library to use (default=auto)
+ --with-testsound=file give the path of test sound file for alsaconf
+ --with-systemdsystemunitdir=DIR
+ Directory for systemd service files
+ --with-asound-state-dir=DIR
+ Directory to place asound.state file in
+ --with-alsactl-pidfile-dir=DIR
+ Directory to place alsactl.pid file in
+ --with-alsactl-daemonswitch=FILE
+ File to test for the daemon mode
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ PKG_CONFIG path to pkg-config utility
+ PKG_CONFIG_PATH
+ directories to add to pkg-config's search path
+ PKG_CONFIG_LIBDIR
+ path overriding pkg-config's built-in search path
+ NCURSESW_CFLAGS
+ C compiler flags for NCURSESW, overriding pkg-config
+ NCURSESW_LIBS
+ linker flags for NCURSESW, overriding pkg-config
+ NCURSES_CFLAGS
+ C compiler flags for NCURSES, overriding pkg-config
+ NCURSES_LIBS
+ linker flags for NCURSES, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+am__api_version='1.12'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+
+ PACKAGE=alsa-utils
+ VERSION=1.0.27.2
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+ # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+ enableval=$enable_nls; USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+ GETTEXT_MACRO_VERSION=0.18
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$MSGFMT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_XGETTEXT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$XGETTEXT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ rm -f messages.po
+
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$MSGMERGE" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+ ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$localedir" || localedir='${datadir}/locale'
+
+
+ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+ ac_config_commands="$ac_config_commands po-directories"
+
+
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${acl_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ acl_libext="$acl_cv_libext"
+ acl_shlibext="$acl_cv_shlibext"
+ acl_libname_spec="$acl_cv_libname_spec"
+ acl_library_names_spec="$acl_cv_library_names_spec"
+ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ acl_hardcode_direct="$acl_cv_hardcode_direct"
+ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+
+
+ acl_libdirstem=lib
+ acl_libdirstem2=
+ case "$host_os" in
+ solaris*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
+$as_echo_n "checking for 64-bit host... " >&6; }
+if ${gl_cv_solaris_64bit+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#ifdef _LP64
+sixtyfour bits
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
+ gl_cv_solaris_64bit=yes
+else
+ gl_cv_solaris_64bit=no
+fi
+rm -f conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
+$as_echo "$gl_cv_solaris_64bit" >&6; }
+ if test $gl_cv_solaris_64bit = yes; then
+ acl_libdirstem=lib/64
+ case "$host_cpu" in
+ sparc*) acl_libdirstem2=lib/sparcv9 ;;
+ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+ esac
+ fi
+ ;;
+ *)
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ */../ | */.. )
+ # Better ignore directories of this form. They are misleading.
+ ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+ ;;
+ esac
+ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+
+
+
+
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+ withval=$with_libiconv_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ if test "$acl_libdirstem2" != "$acl_libdirstem" \
+ && ! test -d "$withval/$acl_libdirstem"; then
+ additional_libdir="$withval/$acl_libdirstem2"
+ fi
+ fi
+ fi
+
+fi
+
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ LIBICONV_PREFIX=
+ HAVE_LIBICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$acl_hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ if test "$name" = 'iconv'; then
+ LIBICONV_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ */$acl_libdirstem2 | */$acl_libdirstem2/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+ if test "$name" = 'iconv'; then
+ LIBICONV_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+ gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFLocaleCopyCurrent=yes
+else
+ gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+
+
+
+
+
+
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if eval \${$gt_func_gnugettext_libc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$gt_func_gnugettext_libc=yes"
+else
+ eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+ am_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+ if test "$am_cv_func_iconv" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if ${am_cv_func_iconv_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_save_LIBS="$LIBS"
+ if test $am_cv_lib_iconv = yes; then
+ LIBS="$LIBS $LIBICONV"
+ fi
+ if test "$cross_compiling" = yes; then :
+ case "$host_os" in
+ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+ *) am_cv_func_iconv_works="guessing yes" ;;
+ esac
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+ returns. */
+ {
+ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+ if (cd_utf8_to_88591 != (iconv_t)(-1))
+ {
+ static const char input[] = "\342\202\254"; /* EURO SIGN */
+ char buf[10];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_utf8_to_88591,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ return 1;
+ }
+ }
+ /* Test against Solaris 10 bug: Failures are not distinguishable from
+ successful returns. */
+ {
+ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+ if (cd_ascii_to_88591 != (iconv_t)(-1))
+ {
+ static const char input[] = "\263";
+ char buf[10];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_ascii_to_88591,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ return 1;
+ }
+ }
+#if 0 /* This bug could be worked around by the caller. */
+ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
+ {
+ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+ if (cd_88591_to_utf8 != (iconv_t)(-1))
+ {
+ static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+ char buf[50];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_88591_to_utf8,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if ((int)res > 0)
+ return 1;
+ }
+ }
+#endif
+ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+ provided. */
+ if (/* Try standardized names. */
+ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+ /* Try IRIX, OSF/1 names. */
+ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+ /* Try AIX names. */
+ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+ /* Try HP-UX names. */
+ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+ return 1;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ am_cv_func_iconv_works=yes
+else
+ am_cv_func_iconv_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+ case "$am_cv_func_iconv_works" in
+ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+ *) am_func_iconv=yes ;;
+ esac
+ else
+ am_func_iconv=no am_cv_lib_iconv=no
+ fi
+ if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+ else
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+ withval=$with_libintl_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ if test "$acl_libdirstem2" != "$acl_libdirstem" \
+ && ! test -d "$withval/$acl_libdirstem"; then
+ additional_libdir="$withval/$acl_libdirstem2"
+ fi
+ fi
+ fi
+
+fi
+
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ LIBINTL_PREFIX=
+ HAVE_LIBINTL=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='intl '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$acl_hardcode_direct" = yes; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ if test "$name" = 'intl'; then
+ LIBINTL_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ */$acl_libdirstem2 | */$acl_libdirstem2/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+ if test "$name" = 'intl'; then
+ LIBINTL_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if eval \${$gt_func_gnugettext_libintl+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$gt_func_gnugettext_libintl=yes"
+else
+ eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ fi
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+ if test "$USE_NLS" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+ for element in $INCINTL; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+ fi
+
+ POSUB=po
+ fi
+
+
+
+ INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+
+
+if test "x$target" != "x$host" -a -z "`echo $CC | grep -e '-gcc'`";
+then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cross-compiler" >&5
+$as_echo_n "checking for cross-compiler... " >&6; }
+
+ which ${program_prefix}gcc >/dev/null 2>&1 && CC=${program_prefix}gcc
+ which ${target_cpu}-${target_os}-gcc >/dev/null 2>&1 \
+ && CC=${target_cpu}-${target-os}-gcc
+ which ${target_cpu}-${target_vendor}-${target_os}-gcc >/dev/null 2>&1 \
+ && CC=${target_cpu}-${target_vendor}-${target_os}-gcc
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_PKG_CONFIG" = x; then
+ PKG_CONFIG=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ PKG_CONFIG=$ac_pt_PKG_CONFIG
+ fi
+else
+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=0.9.0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ PKG_CONFIG=""
+ fi
+fi
+alsa_save_CFLAGS="$CFLAGS"
+alsa_save_LDFLAGS="$LDFLAGS"
+alsa_save_LIBS="$LIBS"
+alsa_found=yes
+
+
+# Check whether --with-alsa-prefix was given.
+if test "${with_alsa_prefix+set}" = set; then :
+ withval=$with_alsa_prefix; alsa_prefix="$withval"
+else
+ alsa_prefix=""
+fi
+
+
+
+# Check whether --with-alsa-inc-prefix was given.
+if test "${with_alsa_inc_prefix+set}" = set; then :
+ withval=$with_alsa_inc_prefix; alsa_inc_prefix="$withval"
+else
+ alsa_inc_prefix=""
+fi
+
+
+# Check whether --enable-alsatest was given.
+if test "${enable_alsatest+set}" = set; then :
+ enableval=$enable_alsatest; enable_alsatest="$enableval"
+else
+ enable_alsatest=yes
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA CFLAGS" >&5
+$as_echo_n "checking for ALSA CFLAGS... " >&6; }
+if test "$alsa_inc_prefix" != "" ; then
+ ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix"
+ CFLAGS="$CFLAGS -I$alsa_inc_prefix"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ALSA_CFLAGS" >&5
+$as_echo "$ALSA_CFLAGS" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA LDFLAGS" >&5
+$as_echo_n "checking for ALSA LDFLAGS... " >&6; }
+if test "$alsa_prefix" != "" ; then
+ ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix"
+ LDFLAGS="$LDFLAGS $ALSA_LIBS"
+fi
+
+ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl -lpthread"
+LIBS="$ALSA_LIBS $LIBS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ALSA_LIBS" >&5
+$as_echo "$ALSA_LIBS" >&6; }
+
+if test "x$enable_alsatest" = "xyes"; then
+min_alsa_version=1.0.27
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libasound headers version >= $min_alsa_version" >&5
+$as_echo_n "checking for libasound headers version >= $min_alsa_version... " >&6; }
+no_alsa=""
+ alsa_min_major_version=`echo $min_alsa_version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ alsa_min_minor_version=`echo $min_alsa_version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ alsa_min_micro_version=`echo $min_alsa_version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <alsa/asoundlib.h>
+
+int
+main ()
+{
+
+/* ensure backward compatibility */
+#if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
+#define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
+#endif
+#if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
+#define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
+#endif
+#if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
+#define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
+#endif
+
+# if(SND_LIB_MAJOR > $alsa_min_major_version)
+ exit(0);
+# else
+# if(SND_LIB_MAJOR < $alsa_min_major_version)
+# error not present
+# endif
+
+# if(SND_LIB_MINOR > $alsa_min_minor_version)
+ exit(0);
+# else
+# if(SND_LIB_MINOR < $alsa_min_minor_version)
+# error not present
+# endif
+
+# if(SND_LIB_SUBMINOR < $alsa_min_micro_version)
+# error not present
+# endif
+# endif
+# endif
+exit(0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found." >&5
+$as_echo "found." >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not present." >&5
+$as_echo "not present." >&6; }
+ as_fn_error $? "Sufficiently new version of libasound not found." "$LINENO" 5
+ alsa_found=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+
+if test "x$enable_alsatest" = "xyes"; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for snd_ctl_open in -lasound" >&5
+$as_echo_n "checking for snd_ctl_open in -lasound... " >&6; }
+if ${ac_cv_lib_asound_snd_ctl_open+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lasound $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char snd_ctl_open ();
+int
+main ()
+{
+return snd_ctl_open ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_asound_snd_ctl_open=yes
+else
+ ac_cv_lib_asound_snd_ctl_open=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_asound_snd_ctl_open" >&5
+$as_echo "$ac_cv_lib_asound_snd_ctl_open" >&6; }
+if test "x$ac_cv_lib_asound_snd_ctl_open" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBASOUND 1
+_ACEOF
+
+ LIBS="-lasound $LIBS"
+
+else
+ as_fn_error $? "No linkable libasound was found." "$LINENO" 5
+ alsa_found=no
+
+fi
+
+fi
+
+if test "x$alsa_found" = "xyes" ; then
+ :
+ LIBS=`echo $LIBS | sed 's/-lasound//g'`
+ LIBS=`echo $LIBS | sed 's/ //'`
+ LIBS="-lasound $LIBS"
+fi
+if test "x$alsa_found" = "xno" ; then
+ :
+ CFLAGS="$alsa_save_CFLAGS"
+ LDFLAGS="$alsa_save_LDFLAGS"
+ LIBS="$alsa_save_LIBS"
+ ALSA_CFLAGS=""
+ ALSA_LIBS=""
+fi
+
+
+
+
+if test "x$enable_alsatest" = "xyes"; then
+ac_fn_c_check_func "$LINENO" "snd_ctl_elem_add_enumerated" "ac_cv_func_snd_ctl_elem_add_enumerated"
+if test "x$ac_cv_func_snd_ctl_elem_add_enumerated" = xyes; then :
+
+else
+ as_fn_error $? "No user enum control support in alsa-lib" "$LINENO" 5
+fi
+
+fi
+
+for ac_header in alsa/pcm.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "alsa/pcm.h" "ac_cv_header_alsa_pcm_h" "#include <alsa/asoundlib.h>
+"
+if test "x$ac_cv_header_alsa_pcm_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ALSA_PCM_H 1
+_ACEOF
+ have_pcm="yes"
+else
+ have_pcm="no"
+fi
+
+done
+
+for ac_header in alsa/mixer.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "alsa/mixer.h" "ac_cv_header_alsa_mixer_h" "#include <alsa/asoundlib.h>
+"
+if test "x$ac_cv_header_alsa_mixer_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ALSA_MIXER_H 1
+_ACEOF
+ have_mixer="yes"
+else
+ have_mixer="no"
+fi
+
+done
+
+for ac_header in alsa/rawmidi.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "alsa/rawmidi.h" "ac_cv_header_alsa_rawmidi_h" "#include <alsa/asoundlib.h>
+"
+if test "x$ac_cv_header_alsa_rawmidi_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ALSA_RAWMIDI_H 1
+_ACEOF
+ have_rawmidi="yes"
+else
+ have_rawmidi="no"
+fi
+
+done
+
+for ac_header in alsa/seq.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "alsa/seq.h" "ac_cv_header_alsa_seq_h" "#include <alsa/asoundlib.h>
+"
+if test "x$ac_cv_header_alsa_seq_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ALSA_SEQ_H 1
+_ACEOF
+ have_seq="yes"
+else
+ have_seq="no"
+fi
+
+done
+
+for ac_header in samplerate.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "samplerate.h" "ac_cv_header_samplerate_h" "#include <samplerate.h>
+"
+if test "x$ac_cv_header_samplerate_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_SAMPLERATE_H 1
+_ACEOF
+ have_samplerate="yes"
+else
+ have_samplerate="no"
+fi
+
+done
+
+
+ if test "$have_pcm" = "yes"; then
+ HAVE_PCM_TRUE=
+ HAVE_PCM_FALSE='#'
+else
+ HAVE_PCM_TRUE='#'
+ HAVE_PCM_FALSE=
+fi
+
+ if test "$have_mixer" = "yes"; then
+ HAVE_MIXER_TRUE=
+ HAVE_MIXER_FALSE='#'
+else
+ HAVE_MIXER_TRUE='#'
+ HAVE_MIXER_FALSE=
+fi
+
+ if test "$have_rawmidi" = "yes"; then
+ HAVE_RAWMIDI_TRUE=
+ HAVE_RAWMIDI_FALSE='#'
+else
+ HAVE_RAWMIDI_TRUE='#'
+ HAVE_RAWMIDI_FALSE=
+fi
+
+ if test "$have_seq" = "yes"; then
+ HAVE_SEQ_TRUE=
+ HAVE_SEQ_FALSE='#'
+else
+ HAVE_SEQ_TRUE='#'
+ HAVE_SEQ_FALSE=
+fi
+
+ if test "$have_samplerate" = "yes"; then
+ HAVE_SAMPLERATE_TRUE=
+ HAVE_SAMPLERATE_FALSE='#'
+else
+ HAVE_SAMPLERATE_TRUE='#'
+ HAVE_SAMPLERATE_FALSE=
+fi
+
+
+LIBRT=""
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for librt" >&5
+$as_echo_n "checking for librt... " >&6; }
+
+# Check whether --with-librt was given.
+if test "${with_librt+set}" = set; then :
+ withval=$with_librt; have_librt="$withval"
+else
+ have_librt="yes"
+fi
+
+if test "$have_librt" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5
+$as_echo_n "checking for clock_gettime in -lrt... " >&6; }
+if ${ac_cv_lib_rt_clock_gettime+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lrt $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char clock_gettime ();
+int
+main ()
+{
+return clock_gettime ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_rt_clock_gettime=yes
+else
+ ac_cv_lib_rt_clock_gettime=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5
+$as_echo "$ac_cv_lib_rt_clock_gettime" >&6; }
+if test "x$ac_cv_lib_rt_clock_gettime" = xyes; then :
+ HAVE_LIBRT="yes"
+fi
+
+ if test "$HAVE_LIBRT" = "yes" ; then
+ LIBRT="-lrt"
+
+$as_echo "#define HAVE_LIBRT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_CLOCK_GETTIME 1" >>confdefs.h
+
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+CURSESINC=""
+CURSESLIB=""
+CURSES_CFLAGS=""
+alsamixer=
+if test "$have_mixer" = "yes"; then
+# Check whether --enable-alsamixer was given.
+if test "${enable_alsamixer+set}" = set; then :
+ enableval=$enable_alsamixer; case "${enableval}" in
+ yes) alsamixer=true ;;
+ no) alsamixer=false ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-alsamixer" "$LINENO" 5 ;;
+ esac
+else
+ alsamixer=true
+fi
+
+fi
+ if test x$alsamixer = xtrue; then
+ ALSAMIXER_TRUE=
+ ALSAMIXER_FALSE='#'
+else
+ ALSAMIXER_TRUE='#'
+ ALSAMIXER_FALSE=
+fi
+
+
+# Check whether --enable-alsaconf was given.
+if test "${enable_alsaconf+set}" = set; then :
+ enableval=$enable_alsaconf; case "${enableval}" in
+ yes) alsaconf=true ;;
+ no) alsaconf=false ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-alsaconf" "$LINENO" 5 ;;
+ esac
+else
+ alsaconf=true
+fi
+
+ if test x$alsaconf = xtrue; then
+ ALSACONF_TRUE=
+ ALSACONF_FALSE='#'
+else
+ ALSACONF_TRUE='#'
+ ALSACONF_FALSE=
+fi
+
+
+# Check whether --enable-alsaloop was given.
+if test "${enable_alsaloop+set}" = set; then :
+ enableval=$enable_alsaloop; case "${enableval}" in
+ yes) alsaloop=true ;;
+ no) alsaloop=false ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-alsaloop" "$LINENO" 5 ;;
+ esac
+else
+ alsaloop=true
+fi
+
+ if test x$alsaloop = xtrue; then
+ ALSALOOP_TRUE=
+ ALSALOOP_FALSE='#'
+else
+ ALSALOOP_TRUE='#'
+ ALSALOOP_FALSE=
+fi
+
+
+xmlto=""
+# Check whether --enable-xmlto was given.
+if test "${enable_xmlto+set}" = set; then :
+ enableval=$enable_xmlto; xmlto="$enableval"
+else
+ xmlto="yes"
+fi
+
+if test "$xmlto" = "yes"; then
+ # Extract the first word of "xmlto", so it can be a program name with args.
+set dummy xmlto; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_xmlto+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$xmlto"; then
+ ac_cv_prog_xmlto="$xmlto" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_xmlto="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+xmlto=$ac_cv_prog_xmlto
+if test -n "$xmlto"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xmlto" >&5
+$as_echo "$xmlto" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+ if test x"$xmlto" = xyes; then
+ USE_XMLTO_TRUE=
+ USE_XMLTO_FALSE='#'
+else
+ USE_XMLTO_TRUE='#'
+ USE_XMLTO_FALSE=
+fi
+
+
+
+# Check whether --with-udev-rules-dir was given.
+if test "${with_udev_rules_dir+set}" = set; then :
+ withval=$with_udev_rules_dir; udevrulesdir=$withval
+else
+ udevrulesdir="/lib/udev/rules.d"
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+if test x$alsamixer = xtrue; then
+
+# Check whether --with-curses was given.
+if test "${with_curses+set}" = set; then :
+ withval=$with_curses; curseslib="$withval"
+else
+ curseslib="auto"
+fi
+
+ CURSESLIBDIR=""
+ NCURSESLIBSUFFIX=""
+ CURSES_NLS="no"
+ if test "$curseslib" = "ncursesw" -o \( "$curseslib" = "auto" -a "$USE_NLS" = "yes" \); then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for NCURSESW" >&5
+$as_echo_n "checking for NCURSESW... " >&6; }
+
+if test -n "$NCURSESW_CFLAGS"; then
+ pkg_cv_NCURSESW_CFLAGS="$NCURSESW_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncursesw\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ncursesw") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_NCURSESW_CFLAGS=`$PKG_CONFIG --cflags "ncursesw" 2>/dev/null`
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$NCURSESW_LIBS"; then
+ pkg_cv_NCURSESW_LIBS="$NCURSESW_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncursesw\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ncursesw") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_NCURSESW_LIBS=`$PKG_CONFIG --libs "ncursesw" 2>/dev/null`
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ NCURSESW_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ncursesw" 2>&1`
+ else
+ NCURSESW_PKG_ERRORS=`$PKG_CONFIG --print-errors "ncursesw" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$NCURSESW_PKG_ERRORS" >&5
+
+
+ # Extract the first word of "ncursesw5-config", so it can be a program name with args.
+set dummy ncursesw5-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ncursesw5_config+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ncursesw5_config"; then
+ ac_cv_prog_ncursesw5_config="$ncursesw5_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ncursesw5_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ncursesw5_config=$ac_cv_prog_ncursesw5_config
+if test -n "$ncursesw5_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncursesw5_config" >&5
+$as_echo "$ncursesw5_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "$ncursesw5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncursesw5-config --libs`
+ CURSESLIBDIR=`ncursesw5-config --libdir`
+ CURSES_CFLAGS=`ncursesw5-config --cflags`
+ curseslib="ncursesw"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncursesw" >&5
+$as_echo_n "checking for initscr in -lncursesw... " >&6; }
+if ${ac_cv_lib_ncursesw_initscr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncursesw $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_ncursesw_initscr=yes
+else
+ ac_cv_lib_ncursesw_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_initscr" >&5
+$as_echo "$ac_cv_lib_ncursesw_initscr" >&6; }
+if test "x$ac_cv_lib_ncursesw_initscr" = xyes; then :
+ CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"
+fi
+
+ fi
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ # Extract the first word of "ncursesw5-config", so it can be a program name with args.
+set dummy ncursesw5-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ncursesw5_config+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ncursesw5_config"; then
+ ac_cv_prog_ncursesw5_config="$ncursesw5_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ncursesw5_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ncursesw5_config=$ac_cv_prog_ncursesw5_config
+if test -n "$ncursesw5_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncursesw5_config" >&5
+$as_echo "$ncursesw5_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "$ncursesw5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncursesw5-config --libs`
+ CURSESLIBDIR=`ncursesw5-config --libdir`
+ CURSES_CFLAGS=`ncursesw5-config --cflags`
+ curseslib="ncursesw"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncursesw" >&5
+$as_echo_n "checking for initscr in -lncursesw... " >&6; }
+if ${ac_cv_lib_ncursesw_initscr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncursesw $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_ncursesw_initscr=yes
+else
+ ac_cv_lib_ncursesw_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_initscr" >&5
+$as_echo "$ac_cv_lib_ncursesw_initscr" >&6; }
+if test "x$ac_cv_lib_ncursesw_initscr" = xyes; then :
+ CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"
+fi
+
+ fi
+
+else
+ NCURSESW_CFLAGS=$pkg_cv_NCURSESW_CFLAGS
+ NCURSESW_LIBS=$pkg_cv_NCURSESW_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ CURSESINC="<ncurses.h>"
+ CURSESLIB="${NCURSESW_LIBS}"
+ CURSESLIBDIR=
+ CURSES_CFLAGS="${NCURSESW_CFLAGS}"
+ curseslib="ncursesw"
+
+fi
+ if test -n "$CURSESINC"; then
+ NCURSESLIBSUFFIX="w"
+ CURSES_NLS="yes"
+ fi
+ fi
+ if test "$curseslib" = "ncurses" -o "$curseslib" = "auto"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for NCURSES" >&5
+$as_echo_n "checking for NCURSES... " >&6; }
+
+if test -n "$NCURSES_CFLAGS"; then
+ pkg_cv_NCURSES_CFLAGS="$NCURSES_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncurses\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ncurses") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_NCURSES_CFLAGS=`$PKG_CONFIG --cflags "ncurses" 2>/dev/null`
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$NCURSES_LIBS"; then
+ pkg_cv_NCURSES_LIBS="$NCURSES_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncurses\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "ncurses") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_NCURSES_LIBS=`$PKG_CONFIG --libs "ncurses" 2>/dev/null`
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ NCURSES_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ncurses" 2>&1`
+ else
+ NCURSES_PKG_ERRORS=`$PKG_CONFIG --print-errors "ncurses" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$NCURSES_PKG_ERRORS" >&5
+
+
+ # Extract the first word of "ncurses5-config", so it can be a program name with args.
+set dummy ncurses5-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ncurses5_config+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ncurses5_config"; then
+ ac_cv_prog_ncurses5_config="$ncurses5_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ncurses5_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ncurses5_config=$ac_cv_prog_ncurses5_config
+if test -n "$ncurses5_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncurses5_config" >&5
+$as_echo "$ncurses5_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "$ncurses5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncurses5-config --libs`
+ CURSESLIBDIR=`ncurses5-config --libdir`
+ CURSES_CFLAGS=`ncurses5-config --cflags`
+ curseslib="ncurses"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5
+$as_echo_n "checking for initscr in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_initscr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_ncurses_initscr=yes
+else
+ ac_cv_lib_ncurses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5
+$as_echo "$ac_cv_lib_ncurses_initscr" >&6; }
+if test "x$ac_cv_lib_ncurses_initscr" = xyes; then :
+ CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"
+fi
+
+ fi
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ # Extract the first word of "ncurses5-config", so it can be a program name with args.
+set dummy ncurses5-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ncurses5_config+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ncurses5_config"; then
+ ac_cv_prog_ncurses5_config="$ncurses5_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ncurses5_config="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ncurses5_config=$ac_cv_prog_ncurses5_config
+if test -n "$ncurses5_config"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncurses5_config" >&5
+$as_echo "$ncurses5_config" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "$ncurses5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncurses5-config --libs`
+ CURSESLIBDIR=`ncurses5-config --libdir`
+ CURSES_CFLAGS=`ncurses5-config --cflags`
+ curseslib="ncurses"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5
+$as_echo_n "checking for initscr in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_initscr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_ncurses_initscr=yes
+else
+ ac_cv_lib_ncurses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5
+$as_echo "$ac_cv_lib_ncurses_initscr" >&6; }
+if test "x$ac_cv_lib_ncurses_initscr" = xyes; then :
+ CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"
+fi
+
+ fi
+
+else
+ NCURSES_CFLAGS=$pkg_cv_NCURSES_CFLAGS
+ NCURSES_LIBS=$pkg_cv_NCURSES_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ CURSESINC="<ncurses.h>"
+ CURSESLIB="${NCURSES_LIBS}"
+ CURSESLIBDIR=
+ CURSES_CFLAGS="${NCURSES_CFLAGS}"
+ curseslib="ncurses"
+
+fi
+ fi
+ if test "$curseslib" = "curses" -o "$curseslib" = "auto"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lcurses" >&5
+$as_echo_n "checking for initscr in -lcurses... " >&6; }
+if ${ac_cv_lib_curses_initscr+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurses $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_curses_initscr=yes
+else
+ ac_cv_lib_curses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_initscr" >&5
+$as_echo "$ac_cv_lib_curses_initscr" >&6; }
+if test "x$ac_cv_lib_curses_initscr" = xyes; then :
+ CURSESINC='<curses.h>'; CURSESLIB='-lcurses'; curseslib="curses"
+fi
+
+ fi
+ if test -z "$CURSESINC"; then
+ as_fn_error $? "this packages requires a curses library" "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses library" >&5
+$as_echo_n "checking for curses library... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $curseslib" >&5
+$as_echo "$curseslib" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses header name" >&5
+$as_echo_n "checking for curses header name... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSESINC" >&5
+$as_echo "$CURSESINC" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses compiler flags" >&5
+$as_echo_n "checking for curses compiler flags... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSES_CFLAGS" >&5
+$as_echo "$CURSES_CFLAGS" >&6; }
+
+ if test -n "$CURSESLIBDIR"; then
+ if test "-L$CURSESLIBDIR " = "$(echo $CURSESLIB | cut -c-$((${#CURSESLIBDIR}+3)) )"; then
+ CURSESLIB="$(echo $CURSESLIB | cut -c$((${#CURSESLIBDIR}+4))-)"
+ fi
+ fi
+
+ saved_CFLAGS="$CFLAGS"
+ saved_LDFLAGS="$LDFLAGS"
+ saved_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $CURSES_CFLAGS"
+ if test -n "$CURSESLIBDIR"; then
+ LDFLAGS="$LDFLAGS -L$CURSESLIBDIR"
+ fi
+ LIBS="$CURSESLIB $LIBS"
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <panel.h>
+int
+main ()
+{
+set_escdelay(100);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ HAVE_CURSES_ESCDELAY="yes"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$HAVE_CURSES_ESCDELAY" = "yes"; then
+
+$as_echo "#define HAVE_CURSES_ESCDELAY 1" >>confdefs.h
+
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses NLS support" >&5
+$as_echo_n "checking for curses NLS support... " >&6; }
+ if test "$curseslib" = "curses"; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #define _XOPEN_SOURCE 1
+ #define _XOPEN_SOURCE_EXTENDED 1
+ #include <curses.h>
+
+int
+main ()
+{
+
+ cchar_t wc;
+ setcchar(&wc, L"x", A_NORMAL, 0, 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ CURSES_NLS="yes"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSES_NLS" >&5
+$as_echo "$CURSES_NLS" >&6; }
+ if test "$CURSES_NLS" = "yes"; then
+
+$as_echo "#define ENABLE_NLS_IN_CURSES 1" >>confdefs.h
+
+ fi
+ fi
+
+ # On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in panel.h menu.h form.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ as_fn_error $? "required curses helper header not found" "$LINENO" 5
+fi
+
+done
+
+ as_ac_Lib=`$as_echo "ac_cv_lib_panel$NCURSESLIBSUFFIX''_new_panel" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for new_panel in -lpanel$NCURSESLIBSUFFIX" >&5
+$as_echo_n "checking for new_panel in -lpanel$NCURSESLIBSUFFIX... " >&6; }
+if eval \${$as_ac_Lib+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpanel$NCURSESLIBSUFFIX $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char new_panel ();
+int
+main ()
+{
+return new_panel ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$as_ac_Lib=yes"
+else
+ eval "$as_ac_Lib=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+eval ac_res=\$$as_ac_Lib
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
+ CURSESLIB="-lpanel$NCURSESLIBSUFFIX $CURSESLIB"
+else
+ as_fn_error $? "panel$NCURSESLIBSUFFIX library not found" "$LINENO" 5
+fi
+
+ as_ac_Lib=`$as_echo "ac_cv_lib_menu$NCURSESLIBSUFFIX''_new_menu" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for new_menu in -lmenu$NCURSESLIBSUFFIX" >&5
+$as_echo_n "checking for new_menu in -lmenu$NCURSESLIBSUFFIX... " >&6; }
+if eval \${$as_ac_Lib+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmenu$NCURSESLIBSUFFIX $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char new_menu ();
+int
+main ()
+{
+return new_menu ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$as_ac_Lib=yes"
+else
+ eval "$as_ac_Lib=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+eval ac_res=\$$as_ac_Lib
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
+ CURSESLIB="-lmenu$NCURSESLIBSUFFIX $CURSESLIB"
+else
+ as_fn_error $? "menu$NCURSESLIBSUFFIX library not found" "$LINENO" 5
+fi
+
+ as_ac_Lib=`$as_echo "ac_cv_lib_form$NCURSESLIBSUFFIX''_new_form" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for new_form in -lform$NCURSESLIBSUFFIX" >&5
+$as_echo_n "checking for new_form in -lform$NCURSESLIBSUFFIX... " >&6; }
+if eval \${$as_ac_Lib+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lform$NCURSESLIBSUFFIX $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char new_form ();
+int
+main ()
+{
+return new_form ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$as_ac_Lib=yes"
+else
+ eval "$as_ac_Lib=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+eval ac_res=\$$as_ac_Lib
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
+ CURSESLIB="-lform$NCURSESLIBSUFFIX $CURSESLIB"
+else
+ as_fn_error $? "form$NCURSESLIBSUFFIX library not found" "$LINENO" 5
+fi
+
+
+ CFLAGS="$saved_CFLAGS"
+ LDFLAGS="$saved_LDFLAGS"
+ LIBS="$saved_LIBS"
+
+ if test -n "$CURSESLIBDIR"; then
+ CURSESLIB="-L$CURSESLIBDIR $CURSESLIB"
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses linker flags" >&5
+$as_echo_n "checking for curses linker flags... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSESLIB" >&5
+$as_echo "$CURSESLIB" >&6; }
+fi
+
+
+
+
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+
+eval dir="$datadir"
+case "$dir" in
+/*) ;;
+*) dir="$prefix/share"
+esac
+
+soundsdir="$dir/sounds/alsa"
+
+cat >>confdefs.h <<_ACEOF
+#define SOUNDSDIR "$soundsdir"
+_ACEOF
+
+
+mydatadir="$dir/alsa"
+
+cat >>confdefs.h <<_ACEOF
+#define DATADIR "$mydatadir"
+_ACEOF
+
+
+
+# Check whether --with-testsound was given.
+if test "${with_testsound+set}" = set; then :
+ withval=$with_testsound; TESTSOUND="$withval"
+else
+ TESTSOUND="$dir/test.wav"
+fi
+
+
+
+ac_config_headers="$ac_config_headers include/aconfig.h"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this sort of thing. */
+ typedef int charset[2];
+ const charset cs = { 0, 0 };
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *pcpcc;
+ char **ppc;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ pcpcc = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++pcpcc;
+ ppc = (char**) pcpcc;
+ pcpcc = (char const *const *) ppc;
+ { /* SCO 3.2v4 cc rejects this sort of thing. */
+ char tx;
+ char *t = &tx;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ if (s) return 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; } bx;
+ struct s *b = &bx; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ if (!foo) return 0;
+ }
+ return !cs[0] && !zero.x;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_const=yes
+else
+ ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+if ${ac_cv_c_inline+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_inline=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
+$as_echo "$ac_cv_c_inline" >&6; }
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_time=yes
+else
+ ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+
+if test $ac_cv_c_compiler_gnu = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5
+$as_echo_n "checking whether $CC needs -traditional... " >&6; }
+if ${ac_cv_prog_gcc_traditional+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_pattern="Autoconf.*'x'"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sgtty.h>
+Autoconf TIOCGETP
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+ ac_cv_prog_gcc_traditional=yes
+else
+ ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+ if test $ac_cv_prog_gcc_traditional = no; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <termio.h>
+Autoconf TCGETA
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+ ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5
+$as_echo "$ac_cv_prog_gcc_traditional" >&6; }
+ if test $ac_cv_prog_gcc_traditional = yes; then
+ CC="$CC -traditional"
+ fi
+fi
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ if ac_fn_c_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+
+
+fi
+
+
+
+SND_UTIL_VERSION=$VERSION
+echo $VERSION > $srcdir/version
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$SND_UTIL_VERSION"
+_ACEOF
+
+
+SND_UTIL_MAJOR=`echo $VERSION | cut -d . -f 1`
+
+SND_UTIL_MINOR=`echo $VERSION | cut -d . -f 2`
+
+SND_UTIL_SUBMINOR=`echo $VERSION | cut -d . -f 3 | sed -e 's/pre[0-9]*//g'`
+
+
+
+
+
+
+# Check whether --with-systemdsystemunitdir was given.
+if test "${with_systemdsystemunitdir+set}" = set; then :
+ withval=$with_systemdsystemunitdir;
+else
+ with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)
+fi
+
+if test "x$with_systemdsystemunitdir" != xno; then
+ systemdsystemunitdir=$with_systemdsystemunitdir
+
+fi
+ if test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ; then
+ HAVE_SYSTEMD_TRUE=
+ HAVE_SYSTEMD_FALSE='#'
+else
+ HAVE_SYSTEMD_TRUE='#'
+ HAVE_SYSTEMD_FALSE=
+fi
+
+
+
+# Check whether --with-asound-state-dir was given.
+if test "${with_asound_state_dir+set}" = set; then :
+ withval=$with_asound_state_dir; ASOUND_STATE_DIR="$withval"
+else
+ ASOUND_STATE_DIR="/var/lib/alsa"
+fi
+
+
+
+
+# Check whether --with-alsactl-pidfile-dir was given.
+if test "${with_alsactl_pidfile_dir+set}" = set; then :
+ withval=$with_alsactl_pidfile_dir; ALSACTL_PIDFILE_DIR="$withval"
+else
+ ALSACTL_PIDFILE_DIR="/var/run"
+fi
+
+
+
+
+# Check whether --with-alsactl-daemonswitch was given.
+if test "${with_alsactl_daemonswitch+set}" = set; then :
+ withval=$with_alsactl_daemonswitch; ALSACTL_DAEMONSWITCH="$withval"
+else
+ ALSACTL_DAEMONSWITCH="/etc/alsa/state-daemon.conf"
+fi
+
+
+
+ac_config_files="$ac_config_files Makefile alsactl/Makefile alsactl/init/Makefile alsamixer/Makefile amidi/Makefile amixer/Makefile m4/Makefile po/Makefile.in alsaconf/alsaconf alsaconf/Makefile alsaconf/po/Makefile alsaucm/Makefile aplay/Makefile include/Makefile iecset/Makefile utils/Makefile utils/alsa-utils.spec seq/Makefile seq/aconnect/Makefile seq/aplaymidi/Makefile seq/aseqdump/Makefile seq/aseqnet/Makefile speaker-test/Makefile speaker-test/samples/Makefile alsaloop/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_PCM_TRUE}" && test -z "${HAVE_PCM_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_PCM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_MIXER_TRUE}" && test -z "${HAVE_MIXER_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_MIXER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_RAWMIDI_TRUE}" && test -z "${HAVE_RAWMIDI_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_RAWMIDI\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SEQ_TRUE}" && test -z "${HAVE_SEQ_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_SEQ\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SAMPLERATE_TRUE}" && test -z "${HAVE_SAMPLERATE_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_SAMPLERATE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ALSAMIXER_TRUE}" && test -z "${ALSAMIXER_FALSE}"; then
+ as_fn_error $? "conditional \"ALSAMIXER\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ALSACONF_TRUE}" && test -z "${ALSACONF_FALSE}"; then
+ as_fn_error $? "conditional \"ALSACONF\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ALSALOOP_TRUE}" && test -z "${ALSALOOP_FALSE}"; then
+ as_fn_error $? "conditional \"ALSALOOP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_XMLTO_TRUE}" && test -z "${USE_XMLTO_FALSE}"; then
+ as_fn_error $? "conditional \"USE_XMLTO\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SYSTEMD_TRUE}" && test -z "${HAVE_SYSTEMD_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_SYSTEMD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "include/aconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS include/aconfig.h" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "alsactl/Makefile") CONFIG_FILES="$CONFIG_FILES alsactl/Makefile" ;;
+ "alsactl/init/Makefile") CONFIG_FILES="$CONFIG_FILES alsactl/init/Makefile" ;;
+ "alsamixer/Makefile") CONFIG_FILES="$CONFIG_FILES alsamixer/Makefile" ;;
+ "amidi/Makefile") CONFIG_FILES="$CONFIG_FILES amidi/Makefile" ;;
+ "amixer/Makefile") CONFIG_FILES="$CONFIG_FILES amixer/Makefile" ;;
+ "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
+ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+ "alsaconf/alsaconf") CONFIG_FILES="$CONFIG_FILES alsaconf/alsaconf" ;;
+ "alsaconf/Makefile") CONFIG_FILES="$CONFIG_FILES alsaconf/Makefile" ;;
+ "alsaconf/po/Makefile") CONFIG_FILES="$CONFIG_FILES alsaconf/po/Makefile" ;;
+ "alsaucm/Makefile") CONFIG_FILES="$CONFIG_FILES alsaucm/Makefile" ;;
+ "aplay/Makefile") CONFIG_FILES="$CONFIG_FILES aplay/Makefile" ;;
+ "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
+ "iecset/Makefile") CONFIG_FILES="$CONFIG_FILES iecset/Makefile" ;;
+ "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;;
+ "utils/alsa-utils.spec") CONFIG_FILES="$CONFIG_FILES utils/alsa-utils.spec" ;;
+ "seq/Makefile") CONFIG_FILES="$CONFIG_FILES seq/Makefile" ;;
+ "seq/aconnect/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aconnect/Makefile" ;;
+ "seq/aplaymidi/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aplaymidi/Makefile" ;;
+ "seq/aseqdump/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aseqdump/Makefile" ;;
+ "seq/aseqnet/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aseqnet/Makefile" ;;
+ "speaker-test/Makefile") CONFIG_FILES="$CONFIG_FILES speaker-test/Makefile" ;;
+ "speaker-test/samples/Makefile") CONFIG_FILES="$CONFIG_FILES speaker-test/samples/Makefile" ;;
+ "alsaloop/Makefile") CONFIG_FILES="$CONFIG_FILES alsaloop/Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "po-directories":C)
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.in b/configure.in
new file mode 100644
index 0000000..3ae3209
--- /dev/null
+++ b/configure.in
@@ -0,0 +1,349 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.59)
+AC_INIT(aplay/aplay.c)
+AC_PREFIX_DEFAULT(/usr)
+AM_INIT_AUTOMAKE(alsa-utils, 1.0.27.2)
+
+AM_MAINTAINER_MODE([enable])
+
+AM_GNU_GETTEXT([external])
+AM_GNU_GETTEXT_VERSION([0.15])
+
+dnl Checks for programs.
+
+dnl try to gues cross-compiler if not set
+if test "x$target" != "x$host" -a -z "`echo $CC | grep -e '-gcc'`";
+then
+ AC_MSG_CHECKING(for cross-compiler)
+
+ which ${program_prefix}gcc >/dev/null 2>&1 && CC=${program_prefix}gcc
+ which ${target_cpu}-${target_os}-gcc >/dev/null 2>&1 \
+ && CC=${target_cpu}-${target-os}-gcc
+ which ${target_cpu}-${target_vendor}-${target_os}-gcc >/dev/null 2>&1 \
+ && CC=${target_cpu}-${target_vendor}-${target_os}-gcc
+
+ AC_MSG_RESULT($CC)
+fi
+
+AC_PROG_CC
+dnl AC_PROG_CXX
+AC_PROG_INSTALL
+AC_PROG_MKDIR_P
+AC_PROG_LN_S
+AC_PROG_SED
+PKG_PROG_PKG_CONFIG
+AM_PATH_ALSA(1.0.27)
+if test "x$enable_alsatest" = "xyes"; then
+AC_CHECK_FUNC([snd_ctl_elem_add_enumerated],
+ , [AC_ERROR([No user enum control support in alsa-lib])])
+fi
+
+dnl Check components
+AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"],
+ [#include <alsa/asoundlib.h>])
+AC_CHECK_HEADERS([alsa/mixer.h], [have_mixer="yes"], [have_mixer="no"],
+ [#include <alsa/asoundlib.h>])
+AC_CHECK_HEADERS([alsa/rawmidi.h], [have_rawmidi="yes"], [have_rawmidi="no"],
+ [#include <alsa/asoundlib.h>])
+AC_CHECK_HEADERS([alsa/seq.h], [have_seq="yes"], [have_seq="no"],
+ [#include <alsa/asoundlib.h>])
+AC_CHECK_HEADERS([samplerate.h], [have_samplerate="yes"], [have_samplerate="no"],
+ [#include <samplerate.h>])
+
+AM_CONDITIONAL(HAVE_PCM, test "$have_pcm" = "yes")
+AM_CONDITIONAL(HAVE_MIXER, test "$have_mixer" = "yes")
+AM_CONDITIONAL(HAVE_RAWMIDI, test "$have_rawmidi" = "yes")
+AM_CONDITIONAL(HAVE_SEQ, test "$have_seq" = "yes")
+AM_CONDITIONAL(HAVE_SAMPLERATE, test "$have_samplerate" = "yes")
+
+dnl Check for librt
+LIBRT=""
+AC_MSG_CHECKING(for librt)
+AC_ARG_WITH(librt,
+ AS_HELP_STRING([--with-librt], [Use librt for monotonic clock (default = yes)]),
+ [ have_librt="$withval" ], [ have_librt="yes" ])
+if test "$have_librt" = "yes"; then
+ AC_CHECK_LIB([rt], [clock_gettime], [HAVE_LIBRT="yes"])
+ if test "$HAVE_LIBRT" = "yes" ; then
+ LIBRT="-lrt"
+ AC_DEFINE([HAVE_LIBRT], 1, [Have librt])
+ AC_DEFINE([HAVE_CLOCK_GETTIME], 1, [Have clock gettime])
+ fi
+else
+ AC_MSG_RESULT(no)
+fi
+
+dnl Disable alsamixer
+CURSESINC=""
+CURSESLIB=""
+CURSES_CFLAGS=""
+alsamixer=
+if test "$have_mixer" = "yes"; then
+AC_ARG_ENABLE(alsamixer,
+ AS_HELP_STRING([--disable-alsamixer], [Disable alsamixer compilation]),
+ [case "${enableval}" in
+ yes) alsamixer=true ;;
+ no) alsamixer=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-alsamixer) ;;
+ esac],[alsamixer=true])
+fi
+AM_CONDITIONAL(ALSAMIXER, test x$alsamixer = xtrue)
+
+dnl Disable alsaconf
+AC_ARG_ENABLE(alsaconf,
+ AS_HELP_STRING([--disable-alsaconf], [Disable alsaconf packaging]),
+ [case "${enableval}" in
+ yes) alsaconf=true ;;
+ no) alsaconf=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-alsaconf) ;;
+ esac],[alsaconf=true])
+AM_CONDITIONAL(ALSACONF, test x$alsaconf = xtrue)
+
+dnl Disable alsaloop
+AC_ARG_ENABLE(alsaloop,
+ AS_HELP_STRING([--disable-alsaloop], [Disable alsaloop packaging]),
+ [case "${enableval}" in
+ yes) alsaloop=true ;;
+ no) alsaloop=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-alsaloop) ;;
+ esac],[alsaloop=true])
+AM_CONDITIONAL(ALSALOOP, test x$alsaloop = xtrue)
+
+xmlto=""
+AC_ARG_ENABLE(xmlto,
+ AS_HELP_STRING([--disable-xmlto], [Disable man page creation via xmlto]),
+ xmlto="$enableval", xmlto="yes")
+if test "$xmlto" = "yes"; then
+ AC_CHECK_PROG([xmlto], [xmlto], [yes])
+fi
+AM_CONDITIONAL(USE_XMLTO, test x"$xmlto" = xyes)
+
+AC_ARG_WITH(
+ [udev-rules-dir],
+ AS_HELP_STRING([--with-udev-rules-dir],[Directory where to install udev rules to (defaults to /lib/udev/rules.d)]),
+ [udevrulesdir=$withval], [udevrulesdir="/lib/udev/rules.d"])
+AC_SUBST(udevrulesdir)
+
+dnl Checks for header files.
+AC_HEADER_STDC
+if test x$alsamixer = xtrue; then
+ AC_ARG_WITH(curses,
+ AS_HELP_STRING([--with-curses=libname], [Specify the curses library to use (default=auto)]),
+ curseslib="$withval",
+ curseslib="auto")
+ CURSESLIBDIR=""
+ NCURSESLIBSUFFIX=""
+ CURSES_NLS="no"
+ if test "$curseslib" = "ncursesw" -o \( "$curseslib" = "auto" -a "$USE_NLS" = "yes" \); then
+ dnl First try out pkg-config, then fall back to old config scripts.
+ PKG_CHECK_MODULES([NCURSESW], [ncursesw], [
+ CURSESINC="<ncurses.h>"
+ CURSESLIB="${NCURSESW_LIBS}"
+ CURSESLIBDIR=
+ CURSES_CFLAGS="${NCURSESW_CFLAGS}"
+ curseslib="ncursesw"
+ ], [
+ AC_CHECK_PROG([ncursesw5_config], [ncursesw5-config], [yes])
+ if test "$ncursesw5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncursesw5-config --libs`
+ CURSESLIBDIR=`ncursesw5-config --libdir`
+ CURSES_CFLAGS=`ncursesw5-config --cflags`
+ curseslib="ncursesw"
+ else
+ AC_CHECK_LIB(ncursesw, initscr,
+ [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"])
+ fi
+ ])
+ if test -n "$CURSESINC"; then
+ NCURSESLIBSUFFIX="w"
+ CURSES_NLS="yes"
+ fi
+ fi
+ if test "$curseslib" = "ncurses" -o "$curseslib" = "auto"; then
+ dnl First try out pkg-config, then fall back to old config scripts.
+ PKG_CHECK_MODULES([NCURSES], [ncurses], [
+ CURSESINC="<ncurses.h>"
+ CURSESLIB="${NCURSES_LIBS}"
+ CURSESLIBDIR=
+ CURSES_CFLAGS="${NCURSES_CFLAGS}"
+ curseslib="ncurses"
+ ], [
+ AC_CHECK_PROG([ncurses5_config], [ncurses5-config], [yes])
+ if test "$ncurses5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncurses5-config --libs`
+ CURSESLIBDIR=`ncurses5-config --libdir`
+ CURSES_CFLAGS=`ncurses5-config --cflags`
+ curseslib="ncurses"
+ else
+ AC_CHECK_LIB(ncurses, initscr,
+ [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"])
+ fi
+ ])
+ fi
+ if test "$curseslib" = "curses" -o "$curseslib" = "auto"; then
+ AC_CHECK_LIB(curses, initscr,
+ [ CURSESINC='<curses.h>'; CURSESLIB='-lcurses'; curseslib="curses"])
+ fi
+ if test -z "$CURSESINC"; then
+ AC_MSG_ERROR(this packages requires a curses library)
+ fi
+
+ AC_MSG_CHECKING([for curses library])
+ AC_MSG_RESULT([$curseslib])
+ AC_MSG_CHECKING([for curses header name])
+ AC_MSG_RESULT([$CURSESINC])
+ AC_MSG_CHECKING([for curses compiler flags])
+ AC_MSG_RESULT([$CURSES_CFLAGS])
+
+ dnl CURSESLIBS might have the library path at the beginning. If so, we cut it
+ dnl off so that we can insert the other curses libraries before the ncurses
+ dnl library but after the library path (which is later again prepended below).
+ if test -n "$CURSESLIBDIR"; then
+ if test "-L$CURSESLIBDIR " = "$(echo $CURSESLIB | cut -c-$((${#CURSESLIBDIR}+3)) )"; then
+ CURSESLIB="$(echo $CURSESLIB | cut -c$((${#CURSESLIBDIR}+4))-)"
+ fi
+ fi
+
+ saved_CFLAGS="$CFLAGS"
+ saved_LDFLAGS="$LDFLAGS"
+ saved_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $CURSES_CFLAGS"
+ if test -n "$CURSESLIBDIR"; then
+ LDFLAGS="$LDFLAGS -L$CURSESLIBDIR"
+ fi
+ LIBS="$CURSESLIB $LIBS"
+
+ AC_TRY_LINK([#include <panel.h>], [set_escdelay(100);],[HAVE_CURSES_ESCDELAY="yes"])
+ if test "$HAVE_CURSES_ESCDELAY" = "yes"; then
+ AC_DEFINE([HAVE_CURSES_ESCDELAY], 1, [Have curses set_escdelay])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([for curses NLS support])
+ dnl In theory, a single-byte curses works just fine in ISO 8859-* locales.
+ dnl In practice, however, everybody uses UTF-8 nowadays, so we'd better
+ dnl check for wide-character support.
+ dnl For ncurses/ncursesw, CURSES_NLS was already set above.
+ if test "$curseslib" = "curses"; then
+ AC_TRY_LINK([
+ #define _XOPEN_SOURCE 1
+ #define _XOPEN_SOURCE_EXTENDED 1
+ #include <curses.h>
+ ], [
+ cchar_t wc;
+ setcchar(&wc, L"x", A_NORMAL, 0, 0);
+ ],
+ [CURSES_NLS="yes"])
+ fi
+ AC_MSG_RESULT([$CURSES_NLS])
+ if test "$CURSES_NLS" = "yes"; then
+ AC_DEFINE([ENABLE_NLS_IN_CURSES], [1],
+ [Define if curses-based programs can show translated messages.])
+ fi
+ fi
+
+ AC_CHECK_HEADERS([panel.h menu.h form.h], [],
+ [AC_MSG_ERROR([required curses helper header not found])])
+ AC_CHECK_LIB([panel$NCURSESLIBSUFFIX], [new_panel],
+ [CURSESLIB="-lpanel$NCURSESLIBSUFFIX $CURSESLIB"],
+ [AC_MSG_ERROR([panel$NCURSESLIBSUFFIX library not found])])
+ AC_CHECK_LIB([menu$NCURSESLIBSUFFIX], [new_menu],
+ [CURSESLIB="-lmenu$NCURSESLIBSUFFIX $CURSESLIB"],
+ [AC_MSG_ERROR([menu$NCURSESLIBSUFFIX library not found])])
+ AC_CHECK_LIB([form$NCURSESLIBSUFFIX], [new_form],
+ [CURSESLIB="-lform$NCURSESLIBSUFFIX $CURSESLIB"],
+ [AC_MSG_ERROR([form$NCURSESLIBSUFFIX library not found])])
+
+ CFLAGS="$saved_CFLAGS"
+ LDFLAGS="$saved_LDFLAGS"
+ LIBS="$saved_LIBS"
+
+ if test -n "$CURSESLIBDIR"; then
+ CURSESLIB="-L$CURSESLIBDIR $CURSESLIB"
+ fi
+
+ AC_MSG_CHECKING([for curses linker flags])
+ AC_MSG_RESULT([$CURSESLIB])
+fi
+
+AC_SUBST(CURSESINC)
+AC_SUBST(CURSESLIB)
+AC_SUBST(CURSES_CFLAGS)
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+
+eval dir="$datadir"
+case "$dir" in
+/*) ;;
+*) dir="$prefix/share"
+esac
+
+soundsdir="$dir/sounds/alsa"
+AC_DEFINE_UNQUOTED(SOUNDSDIR, "$soundsdir", [directory containing sample data])
+
+mydatadir="$dir/alsa"
+AC_DEFINE_UNQUOTED(DATADIR, "$mydatadir", [directory containing alsa configuration])
+
+AC_ARG_WITH(testsound,
+ AS_HELP_STRING([--with-testsound=file], [give the path of test sound file for alsaconf]),
+ TESTSOUND="$withval",
+ TESTSOUND="$dir/test.wav")
+AC_SUBST(TESTSOUND)
+
+AC_CONFIG_HEADERS(include/aconfig.h)
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_INLINE
+AC_HEADER_TIME
+
+dnl Checks for library functions.
+AC_PROG_GCC_TRADITIONAL
+
+dnl Enable largefile support
+AC_SYS_LARGEFILE
+
+SAVE_UTIL_VERSION
+
+AC_SUBST(LIBRT)
+
+dnl Check for systemd
+AC_ARG_WITH([systemdsystemunitdir],
+ AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
+ [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
+if test "x$with_systemdsystemunitdir" != xno; then
+ AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])
+fi
+AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ])
+
+AC_ARG_WITH([asound-state-dir],
+ AS_HELP_STRING([--with-asound-state-dir=DIR], [Directory to place asound.state file in]),
+ [ASOUND_STATE_DIR="$withval"],
+ [ASOUND_STATE_DIR="/var/lib/alsa"])
+AC_SUBST(ASOUND_STATE_DIR)
+
+AC_ARG_WITH([alsactl-pidfile-dir],
+ AS_HELP_STRING([--with-alsactl-pidfile-dir=DIR], [Directory to place alsactl.pid file in]),
+ [ALSACTL_PIDFILE_DIR="$withval"],
+ [ALSACTL_PIDFILE_DIR="/var/run"])
+AC_SUBST(ALSACTL_PIDFILE_DIR)
+
+AC_ARG_WITH([alsactl-daemonswitch],
+ AS_HELP_STRING([--with-alsactl-daemonswitch=FILE], [File to test for the daemon mode]),
+ [ALSACTL_DAEMONSWITCH="$withval"],
+ [ALSACTL_DAEMONSWITCH="/etc/alsa/state-daemon.conf"])
+AC_SUBST(ALSACTL_DAEMONSWITCH)
+
+AC_OUTPUT(Makefile alsactl/Makefile alsactl/init/Makefile \
+ alsamixer/Makefile amidi/Makefile amixer/Makefile \
+ m4/Makefile po/Makefile.in \
+ alsaconf/alsaconf alsaconf/Makefile \
+ alsaconf/po/Makefile \
+ alsaucm/Makefile \
+ aplay/Makefile include/Makefile iecset/Makefile utils/Makefile \
+ utils/alsa-utils.spec seq/Makefile seq/aconnect/Makefile \
+ seq/aplaymidi/Makefile seq/aseqdump/Makefile seq/aseqnet/Makefile \
+ speaker-test/Makefile speaker-test/samples/Makefile \
+ alsaloop/Makefile)
diff --git a/depcomp b/depcomp
new file mode 100755
index 0000000..debb6ff
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,707 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2012-03-27.16; # UTC
+
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+ # However on
+ # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\':
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ # tcc 0.9.26 (FIXME still under development at the moment of writing)
+ # will emit a similar output, but also prepend the continuation lines
+ # with horizontal tabulation characters.
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form 'foo.o: dependent.h',
+ # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
+ < "$tmpdepfile" > "$depfile"
+ sed '
+ s/[ '"$tab"'][ '"$tab"']*/ /g
+ s/^ *//
+ s/ *\\*$//
+ s/^[^:]*: *//
+ /^$/d
+ /:$/d
+ s/$/ :/
+ ' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test "$stat" = 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/gitcompile b/gitcompile
new file mode 100755
index 0000000..513ef72
--- /dev/null
+++ b/gitcompile
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+if test -d ../alsa-lib/utils && ! test -r `aclocal --print-ac-dir`/alsa.m4; then
+ alsa_m4_flags="-I ../alsa-lib/utils"
+fi
+aclocal $alsa_m4_flags $ACLOCAL_FLAGS
+# save original files to avoid stupid modifications by gettextize
+cp Makefile.am Makefile.am.ok
+cp configure.in configure.in.ok
+gettextize -c -f --no-changelog
+echo "EXTRA_DIST = gettext.m4" > m4/Makefile.am
+cp Makefile.am.ok Makefile.am
+cp configure.in.ok configure.in
+autoheader
+automake --foreign --copy --add-missing
+touch depcomp # for older automake
+autoconf
+export CFLAGS='-O2 -Wall -pipe -g'
+echo "CFLAGS=$CFLAGS"
+echo "./configure $@"
+./configure $@ || exit 1
+unset CFLAGS
+if [ -z "$GITCOMPILE_NO_MAKE" ]; then
+ make
+fi
diff --git a/iecset/Android.mk b/iecset/Android.mk
new file mode 100644
index 0000000..f3334dd
--- /dev/null
+++ b/iecset/Android.mk
@@ -0,0 +1,13 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := iecset
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := iecbits.c \
+ iecset.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/iecset/Makefile.am b/iecset/Makefile.am
new file mode 100644
index 0000000..c03a7f1
--- /dev/null
+++ b/iecset/Makefile.am
@@ -0,0 +1,9 @@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = -lm
+# LDFLAGS = -static
+# CFLAGS += -g -Wall
+
+bin_PROGRAMS = iecset
+iecset_SOURCES = iecset.c iecbits.c
+man_MANS = iecset.1
+EXTRA_DIST = iecset.1
diff --git a/iecset/Makefile.in b/iecset/Makefile.in
new file mode 100644
index 0000000..f75b414
--- /dev/null
+++ b/iecset/Makefile.in
@@ -0,0 +1,649 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = iecset$(EXEEXT)
+subdir = iecset
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_iecset_OBJECTS = iecset.$(OBJEXT) iecbits.$(OBJEXT)
+iecset_OBJECTS = $(am_iecset_OBJECTS)
+iecset_LDADD = $(LDADD)
+iecset_DEPENDENCIES =
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(iecset_SOURCES)
+DIST_SOURCES = $(iecset_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+LDADD = -lm
+iecset_SOURCES = iecset.c iecbits.c
+man_MANS = iecset.1
+EXTRA_DIST = iecset.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign iecset/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign iecset/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+iecset$(EXEEXT): $(iecset_OBJECTS) $(iecset_DEPENDENCIES) $(EXTRA_iecset_DEPENDENCIES)
+ @rm -f iecset$(EXEEXT)
+ $(LINK) $(iecset_OBJECTS) $(iecset_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iecbits.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iecset.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/iecset/NOTICE b/iecset/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/iecset/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/iecset/iecbits.c b/iecset/iecbits.c
new file mode 100644
index 0000000..13e8947
--- /dev/null
+++ b/iecset/iecbits.c
@@ -0,0 +1,259 @@
+/*
+ iecdump - dump IEC958 status bits on ALSA
+ Copyright (C) 2003 by Takashi Iwai <tiwai@suse.de>
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <stdio.h>
+#include <alsa/asoundlib.h>
+
+struct category_str {
+ int val;
+ const char *name;
+};
+
+static const struct category_str con_category[] = {
+ { IEC958_AES1_CON_GENERAL, "general" },
+
+ { IEC958_AES1_CON_IEC908_CD, "CD" },
+ { IEC958_AES1_CON_NON_IEC908_CD, "non-IEC908 CD" },
+ { IEC958_AES1_CON_MINI_DISC, "Mini-Disc" },
+ { IEC958_AES1_CON_DVD, "DVD" },
+
+ { IEC958_AES1_CON_PCM_CODER, "PCM coder" },
+ { IEC958_AES1_CON_MIXER, "digital signal mixer" },
+ { IEC958_AES1_CON_RATE_CONVERTER, "rate converter" },
+ { IEC958_AES1_CON_SAMPLER, "sampler" },
+ { IEC958_AES1_CON_DSP, "digital sound processor" },
+
+ { IEC958_AES1_CON_DAT, "DAT" },
+ { IEC958_AES1_CON_VCR, "VCR" },
+ { IEC958_AES1_CON_DCC, "DCC" },
+ { IEC958_AES1_CON_MAGNETIC_DISC, "magnetic disc" },
+
+ { IEC958_AES1_CON_DAB_JAPAN, "digital audio broadcast (Japan)" },
+ { IEC958_AES1_CON_DAB_EUROPE, "digital audio broadcast (Europe)" },
+ { IEC958_AES1_CON_DAB_USA, "digital audio broadcast (USA)" },
+ { IEC958_AES1_CON_SOFTWARE, "software delivery" },
+
+ { IEC958_AES1_CON_SYNTHESIZER, "synthesizer" },
+ { IEC958_AES1_CON_MICROPHONE, "microphone" },
+
+ { IEC958_AES1_CON_ADC, "ADC without copyright information" },
+
+ { IEC958_AES1_CON_ADC_COPYRIGHT, "ADC with copyright information" },
+
+ { IEC958_AES1_CON_SOLIDMEM_DIGITAL_RECORDER_PLAYER, "flash memory recorder/player" },
+
+ { IEC958_AES1_CON_EXPERIMENTAL, "experimental" },
+};
+
+
+#define ARRAY_SIZE(x) (int)(sizeof(x)/sizeof(x[0]))
+
+void dump_iec958(snd_aes_iec958_t *iec)
+{
+ int i;
+
+ if (! (iec->status[0] & IEC958_AES0_PROFESSIONAL)) {
+ /* consumer */
+ printf("Mode: consumer\n");
+ printf("Data: ");
+ if (!(iec->status[0] & IEC958_AES0_NONAUDIO)) {
+ printf("audio\n");
+ } else {
+ printf("non-audio\n");
+ }
+ printf("Rate: ");
+ switch (iec->status[3] & IEC958_AES3_CON_FS) {
+ case IEC958_AES3_CON_FS_22050:
+ printf("22050 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_24000:
+ printf("24000 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_32000:
+ printf("32000 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_44100:
+ printf("44100 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_48000:
+ printf("48000 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_88200:
+ printf("88200 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_96000:
+ printf("96000 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_176400:
+ printf("176400 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_192000:
+ printf("192000 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_768000:
+ printf("768000 Hz\n");
+ break;
+ case IEC958_AES3_CON_FS_NOTID:
+ printf("not indicated\n");
+ break;
+ default:
+ printf("unknown\n");
+ break;
+ }
+ printf("Copyright: ");
+ if (iec->status[0] & IEC958_AES0_CON_NOT_COPYRIGHT) {
+ printf("permitted\n");
+ } else {
+ printf("protected\n");
+ }
+ printf("Emphasis: ");
+ if ((iec->status[0] & IEC958_AES0_CON_EMPHASIS) != IEC958_AES0_CON_EMPHASIS_5015) {
+ printf("none\n");
+ } else {
+ printf("50/15us\n");
+ }
+ printf("Category: ");
+ for (i = 0; i < ARRAY_SIZE(con_category); i++) {
+ if ((iec->status[1] & IEC958_AES1_CON_CATEGORY) == con_category[i].val) {
+ printf("%s\n", con_category[i].name);
+ break;
+ }
+ }
+ if (i >= ARRAY_SIZE(con_category)) {
+ printf("unknown 0x%x\n", iec->status[1] & IEC958_AES1_CON_CATEGORY);
+ }
+ printf("Original: ");
+ if (iec->status[1] & IEC958_AES1_CON_ORIGINAL) {
+ printf("original\n");
+ } else {
+ printf("1st generation\n");
+ }
+ printf("Clock: ");
+ switch (iec->status[3] & IEC958_AES3_CON_CLOCK) {
+ case IEC958_AES3_CON_CLOCK_1000PPM:
+ printf("1000 ppm\n");
+ break;
+ case IEC958_AES3_CON_CLOCK_50PPM:
+ printf("50 ppm\n");
+ break;
+ case IEC958_AES3_CON_CLOCK_VARIABLE:
+ printf("variable pitch\n");
+ break;
+ default:
+ printf("unknown\n");
+ break;
+ }
+ } else {
+ printf("Mode: professional\n");
+ printf("Data: ");
+ if (!(iec->status[0] & IEC958_AES0_NONAUDIO)) {
+ printf("audio\n");
+ } else {
+ printf("non-audio\n");
+ }
+ printf("Rate: ");
+ switch (iec->status[0] & IEC958_AES0_PRO_FS) {
+ case IEC958_AES0_PRO_FS_44100:
+ printf("44100 Hz\n");
+ break;
+ case IEC958_AES0_PRO_FS_48000:
+ printf("48000 Hz\n");
+ break;
+ case IEC958_AES0_PRO_FS_32000:
+ printf("32000 Hz\n");
+ break;
+ default:
+ printf("unknown\n");
+ break;
+ }
+ printf("Rate Locked: ");
+ if (iec->status[0] & IEC958_AES0_PRO_FREQ_UNLOCKED)
+ printf("no\n");
+ else
+ printf("yes\n");
+ printf("Emphasis: ");
+ switch (iec->status[0] & IEC958_AES0_PRO_EMPHASIS) {
+ case IEC958_AES0_PRO_EMPHASIS_CCITT:
+ printf("CCITT J.17\n");
+ break;
+ case IEC958_AES0_PRO_EMPHASIS_NONE:
+ printf("none\n");
+ break;
+ case IEC958_AES0_PRO_EMPHASIS_5015:
+ printf("50/15us\n");
+ break;
+ case IEC958_AES0_PRO_EMPHASIS_NOTID:
+ default:
+ printf("unknown\n");
+ break;
+ }
+ printf("Stereophonic: ");
+ if ((iec->status[1] & IEC958_AES1_PRO_MODE) == IEC958_AES1_PRO_MODE_STEREOPHONIC) {
+ printf("stereo\n");
+ } else {
+ printf("not indicated\n");
+ }
+ printf("Userbits: ");
+ switch (iec->status[1] & IEC958_AES1_PRO_USERBITS) {
+ case IEC958_AES1_PRO_USERBITS_192:
+ printf("192bit\n");
+ break;
+ case IEC958_AES1_PRO_USERBITS_UDEF:
+ printf("user-defined\n");
+ break;
+ default:
+ printf("unknown\n");
+ break;
+ }
+ printf("Sample Bits: ");
+ switch (iec->status[2] & IEC958_AES2_PRO_SBITS) {
+ case IEC958_AES2_PRO_SBITS_20:
+ printf("20 bit\n");
+ break;
+ case IEC958_AES2_PRO_SBITS_24:
+ printf("24 bit\n");
+ break;
+ case IEC958_AES2_PRO_SBITS_UDEF:
+ printf("user defined\n");
+ break;
+ default:
+ printf("unknown\n");
+ break;
+ }
+ printf("Word Length: ");
+ switch (iec->status[2] & IEC958_AES2_PRO_WORDLEN) {
+ case IEC958_AES2_PRO_WORDLEN_22_18:
+ printf("22 bit or 18 bit\n");
+ break;
+ case IEC958_AES2_PRO_WORDLEN_23_19:
+ printf("23 bit or 19 bit\n");
+ break;
+ case IEC958_AES2_PRO_WORDLEN_24_20:
+ printf("24 bit or 20 bit\n");
+ break;
+ case IEC958_AES2_PRO_WORDLEN_20_16:
+ printf("20 bit or 16 bit\n");
+ break;
+ default:
+ printf("unknown\n");
+ break;
+ }
+ }
+}
+
diff --git a/iecset/iecset.1 b/iecset/iecset.1
new file mode 100644
index 0000000..dec4ac0
--- /dev/null
+++ b/iecset/iecset.1
@@ -0,0 +1,104 @@
+.TH iecset 1 "23 Oct 2003"
+.SH NAME
+iecset \- Set or dump IEC958 status bits
+
+.SH SYNOPSIS
+\fBiecset\fP [\fIoptions\fP] [\fIcmd\fP \fIarg\fP...]
+
+.SH DESCRIPTION
+\fBiecset\fP is a small utility to set or dump the IEC958 (or so-called
+"S/PDIF") status bits of the specified sound card via ALSA control API.
+
+When \fBiecset\fP is started without arguments except for options,
+it will show the current IEC958 status in a human-readable form.
+When the commands are given in the arguments, they are parsed
+and the IEC958 status bits are updated. The resultant status is
+shown as well.
+
+The commands consist of the command directive and the argument.
+As the boolean argument, \fIyes\fP, \fIno\fP, \fItrue\fP, \fIfalse\fP,
+or a digit number is allowed.
+
+.SH EXAMPLES
+.TP
+.BI iecset\ \-Dhw:1
+Displays the current IEC958 status bits on the second card.
+This is equivalent with \fI\-c 1\fP.
+.TP
+.BI iecset\ \-x
+Displays the current IEC958 status bits in a style of the arguments
+for the PCM stream. The output string can be passed to the \fIiec958\fP
+(or \fIspdif\fP) PCM type as the optional argument.
+.TP
+.BI iecset\ pro\ off\ audio\ off
+Sets the current status to the consumer-mode and turns on the
+non-audio bit. The modified status will be shown, too.
+
+.SH OPTIONS
+.TP
+\fI\-D\fP device
+Specifies the device name of the control to open
+.TP
+\fI\-c\fP card
+Specifies the card index to open. Equivalent with \fI\-Dhw:x\fP.
+.TP
+\fI\-n\fP index
+Specifies the IEC958 control element index, in case you have multiple
+IEC958 devices and need to choose one of them.
+.TP
+\fI\-x\fP
+Dumps the status in the form of AESx bytes.
+.TP
+\fI\-i\fP
+Reads the command sequences from stdin.
+Each line has single command.
+
+.SH COMMANDS
+.TP
+\fIprofessional\fP <bool>
+The professional mode (true) or consumer mode (false).
+
+.TP
+\fIaudio\fP <bool>
+The audio mode (true) or non-audio mode (false).
+
+.TP
+\fIrate\fP <int>
+The sample rate in Hz.
+
+.TP
+\fIemphasis\fP <int>
+The emphasis: 0 = none, 1 = 50/15us, 2 = CCITT.
+
+.TP
+\fIlock\fP <bool>
+Rate lock: locked (true), unlocked (false).
+This command is for the professional mode only.
+
+.TP
+\fIsbits\fP <int>
+Sample bits: 2 = 20bit, 4 = 24bit, 6 = undefined.
+This command is for the professional mode only.
+
+.TP
+\fIwordlength\fP <int>
+Wordlength: 0 = No, 2 = 22-18 bit, 4 = 23-19 bit, 5 = 24-20 bit, 6 = 20-16 bit.
+This command is for the professional mode only.
+
+.TP
+\fIcategory\fP <int>
+Category: the value is from 0 to 0x7f.
+This command is for the consumer mode only.
+
+.TP
+\fIcopyright\fP <bool>
+Copyright: copyrighted (true), non-copyrighted (false).
+This command is for the consumer mode only.
+
+.TP
+\fIoriginal\fP <boo>
+Original flag: original (true), 1st generation (false).
+This command is for the consumer mode only.
+
+.SH AUTHOR
+Takashi Iwai <tiwai@suse.de>
diff --git a/iecset/iecset.c b/iecset/iecset.c
new file mode 100644
index 0000000..92a93e8
--- /dev/null
+++ b/iecset/iecset.c
@@ -0,0 +1,432 @@
+/*
+ iecset - change IEC958 status bits on ALSA
+ Copyright (C) 2003 by Takashi Iwai <tiwai@suse.de>
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <stdio.h>
+#include <ctype.h>
+#include <alsa/asoundlib.h>
+
+void dump_iec958(snd_aes_iec958_t *iec);
+
+static int get_bool(const char *str)
+{
+ if (strncmp(str, "yes", 3) == 0 ||
+ strncmp(str, "YES", 3) == 0 ||
+ strncmp(str, "on", 2) == 0 ||
+ strncmp(str, "ON", 2) == 0 ||
+ strncmp(str, "true", 4) == 0 ||
+ strncmp(str, "TRUE", 4) == 0 ||
+ *str == '1')
+ return 1;
+ return 0;
+}
+
+enum {
+ CMD_BOOL, CMD_BOOL_INV, CMD_INT
+};
+
+enum {
+ IDX_PRO, IDX_NOAUDIO, IDX_RATE, IDX_UNLOCK, IDX_SBITS, IDX_WORD, IDX_EMP, IDX_CAT, IDX_NOCOPY, IDX_ORIG,
+ IDX_LAST
+};
+
+struct cmdtbl {
+ const char *name;
+ int idx;
+ int type;
+ const char *desc;
+};
+
+static const struct cmdtbl cmds[] = {
+ { "pro", IDX_PRO, CMD_BOOL,
+ "professional (common)\n\toff = consumer mode, on = professional mode" },
+ { "aud", IDX_NOAUDIO, CMD_BOOL_INV,
+ "audio (common)\n\ton = audio mode, off = non-audio mode" },
+ { "rat", IDX_RATE, CMD_INT,
+ "rate (common)\n\tsample rate in Hz (0 = not indicated)" },
+ { "emp", IDX_EMP, CMD_INT,
+ "emphasis (common)\n\t0 = none, 1 = 50/15us, 2 = CCITT" },
+ { "loc", IDX_UNLOCK, CMD_BOOL_INV,
+ "lock (prof.)\n\toff = rate unlocked, on = rate locked" },
+ { "sbi", IDX_SBITS, CMD_INT,
+ "sbits (prof.)\n\tsample bits 2 = 20bit, 4 = 24bit, 6 = undef" },
+ { "wor", IDX_WORD, CMD_INT,
+ "wordlength (prof.)\n\t0=no, 2=22-18bit, 4=23-19bit, 5=24-20bit, 6=20-16bit" },
+ { "cat", IDX_CAT, CMD_INT,
+ "category (consumer)\n\t0-0x7f" },
+ { "cop", IDX_NOCOPY, CMD_BOOL_INV,
+ "copyright (consumer)\n\toff = non-copyright, on = copyright" },
+ { "ori", IDX_ORIG, CMD_BOOL,
+ "original (consumer)\n\toff = 1st-gen, on = original" },
+};
+
+
+static void error(const char *s, int err)
+{
+ fprintf(stderr, "%s: %s\n", s, snd_strerror(err));
+}
+
+
+static void usage(void)
+{
+ int i;
+
+ printf("Usage: iecset [options] [cmd arg...]\n");
+ printf("Options:\n");
+ printf(" -D device specifies the control device to use\n");
+ printf(" -c card specifies the card number to use (equiv. with -Dhw:#)\n");
+ printf(" -n number specifies the control index number (default = 0)\n");
+ printf(" -x dump the dump the AESx hex code for IEC958 PCM parameters\n");
+ printf(" -i read commands from stdin\n");
+ printf("Commands:\n");
+ for (i = 0; i < (int)(sizeof(cmds)/sizeof(cmds[0])); i++) {
+ printf(" %s\n", cmds[i].desc);
+ }
+}
+
+
+/*
+ * parse iecset commands
+ */
+static void parse_command(int *parms, const char *c, const char *arg)
+{
+ int i;
+
+ for (i = 0; i < (int)(sizeof(cmds)/sizeof(cmds[0])); i++) {
+ if (strncmp(c, cmds[i].name, strlen(cmds[i].name)) == 0) {
+ int val;
+ switch (cmds[i].type) {
+ case CMD_BOOL:
+ val = get_bool(arg);
+ break;
+ case CMD_BOOL_INV:
+ val = !get_bool(arg);
+ break;
+ case CMD_INT:
+ default:
+ val = (int)strtol(arg, NULL, 0);
+ break;
+ }
+ parms[cmds[i].idx] = val;
+ return;
+ }
+ }
+}
+
+static char *skipspace(char *line)
+{
+ char *p;
+ for (p = line; *p && isspace(*p); p++)
+ ;
+ return p;
+}
+
+/*
+ * parse iecset commands from the file
+ */
+static void parse_file(int *parms, FILE *fp)
+{
+ char line[1024], *cmd, *arg;
+ while (fgets(line, sizeof(line), fp) != NULL) {
+ cmd = skipspace(line);
+ if (*cmd == '#' || ! *cmd)
+ continue;
+ for (arg = cmd; *arg && !isspace(*arg); arg++)
+ ;
+ if (! *arg)
+ continue;
+ *arg++ = 0;
+ arg = skipspace(arg);
+ if (! *arg)
+ continue;
+ parse_command(parms, cmd, arg);
+ }
+}
+
+/* update iec958 status values
+ * return non-zero if the values are modified
+ */
+static int update_iec958_status(snd_aes_iec958_t *iec958, int *parms)
+{
+ int changed = 0;
+ if (parms[IDX_PRO] >= 0) {
+ if (parms[IDX_PRO])
+ iec958->status[0] |= IEC958_AES0_PROFESSIONAL;
+ else
+ iec958->status[0] &= ~IEC958_AES0_PROFESSIONAL;
+ changed = 1;
+ }
+ if (parms[IDX_NOAUDIO] >= 0) {
+ if (parms[IDX_NOAUDIO])
+ iec958->status[0] |= IEC958_AES0_NONAUDIO;
+ else
+ iec958->status[0] &= ~IEC958_AES0_NONAUDIO;
+ changed = 1;
+ }
+ if (parms[IDX_RATE] >= 0) {
+ if (iec958->status[0] & IEC958_AES0_PROFESSIONAL) {
+ iec958->status[0] &= ~IEC958_AES0_PRO_FS;
+ switch (parms[IDX_RATE]) {
+ case 44100:
+ iec958->status[0] |= IEC958_AES0_PRO_FS_44100;
+ break;
+ case 48000:
+ iec958->status[0] |= IEC958_AES0_PRO_FS_48000;
+ break;
+ case 32000:
+ iec958->status[0] |= IEC958_AES0_PRO_FS_32000;
+ break;
+ }
+ } else {
+ iec958->status[3] &= ~IEC958_AES3_CON_FS;
+ switch (parms[IDX_RATE]) {
+ case 22050:
+ iec958->status[3] |= IEC958_AES3_CON_FS_22050;
+ break;
+ case 24000:
+ iec958->status[3] |= IEC958_AES3_CON_FS_24000;
+ break;
+ case 32000:
+ iec958->status[3] |= IEC958_AES3_CON_FS_32000;
+ break;
+ case 44100:
+ iec958->status[3] |= IEC958_AES3_CON_FS_44100;
+ break;
+ case 48000:
+ iec958->status[3] |= IEC958_AES3_CON_FS_48000;
+ break;
+ case 88200:
+ iec958->status[3] |= IEC958_AES3_CON_FS_88200;;
+ break;
+ case 96000:
+ iec958->status[3] |= IEC958_AES3_CON_FS_96000;
+ break;
+ case 176400:
+ iec958->status[3] |= IEC958_AES3_CON_FS_176400;
+ break;
+ case 192000:
+ iec958->status[3] |= IEC958_AES3_CON_FS_192000;
+ break;
+ case 768000:
+ iec958->status[3] |= IEC958_AES3_CON_FS_768000;
+ break;
+ default:
+ iec958->status[3] |= IEC958_AES3_CON_FS_NOTID;
+ break;
+ }
+ }
+ changed = 1;
+ }
+ if (parms[IDX_NOCOPY] >= 0) {
+ if (! (iec958->status[0] & IEC958_AES0_PROFESSIONAL)) {
+ if (parms[IDX_NOCOPY])
+ iec958->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+ else
+ iec958->status[0] &= ~IEC958_AES0_CON_NOT_COPYRIGHT;
+ }
+ changed = 1;
+ }
+ if (parms[IDX_ORIG] >= 0) {
+ if (! (iec958->status[0] & IEC958_AES0_PROFESSIONAL)) {
+ if (parms[IDX_ORIG])
+ iec958->status[1] |= IEC958_AES1_CON_ORIGINAL;
+ else
+ iec958->status[1] &= ~IEC958_AES1_CON_ORIGINAL;
+ }
+ changed = 1;
+ }
+ if (parms[IDX_EMP] >= 0) {
+ if (iec958->status[0] & IEC958_AES0_PROFESSIONAL) {
+ iec958->status[0] &= ~IEC958_AES0_PRO_EMPHASIS;
+ switch (parms[IDX_EMP]) {
+ case 0:
+ iec958->status[0] |= IEC958_AES0_PRO_EMPHASIS_NONE;
+ break;
+ case 1:
+ iec958->status[0] |= IEC958_AES0_PRO_EMPHASIS_5015;
+ break;
+ case 2:
+ iec958->status[0] |= IEC958_AES0_PRO_EMPHASIS_CCITT;
+ break;
+ }
+ } else {
+ if (parms[IDX_EMP])
+ iec958->status[0] |= IEC958_AES0_CON_EMPHASIS_5015;
+ else
+ iec958->status[0] &= ~IEC958_AES0_CON_EMPHASIS_5015;
+ }
+ changed = 1;
+ }
+ if (parms[IDX_UNLOCK] >= 0) {
+ if (iec958->status[0] & IEC958_AES0_PROFESSIONAL) {
+ if (parms[IDX_UNLOCK])
+ iec958->status[0] |= IEC958_AES0_PRO_FREQ_UNLOCKED;
+ else
+ iec958->status[0] &= ~IEC958_AES0_PRO_FREQ_UNLOCKED;
+ }
+ changed = 1;
+ }
+ if (parms[IDX_SBITS] >= 0) {
+ if (iec958->status[0] & IEC958_AES0_PROFESSIONAL) {
+ iec958->status[2] &= ~IEC958_AES2_PRO_SBITS;
+ iec958->status[2] |= parms[IDX_SBITS] & 7;
+ }
+ changed = 1;
+ }
+ if (parms[IDX_WORD] >= 0) {
+ if (iec958->status[0] & IEC958_AES0_PROFESSIONAL) {
+ iec958->status[2] &= ~IEC958_AES2_PRO_WORDLEN;
+ iec958->status[2] |= (parms[IDX_WORD] & 7) << 3;
+ }
+ changed = 1;
+ }
+ if (parms[IDX_CAT] >= 0) {
+ if (! (iec958->status[0] & IEC958_AES0_PROFESSIONAL)) {
+ iec958->status[1] &= ~IEC958_AES1_CON_CATEGORY;
+ iec958->status[1] |= parms[IDX_CAT] & 0x7f;
+ }
+ changed = 1;
+ }
+
+ return changed;
+}
+
+
+int main(int argc, char **argv)
+{
+ const char *dev = "default";
+ const char *spdif_str = SND_CTL_NAME_IEC958("", PLAYBACK, DEFAULT);
+ int spdif_index = -1;
+ snd_ctl_t *ctl;
+ snd_ctl_elem_list_t *clist;
+ snd_ctl_elem_id_t *cid;
+ snd_ctl_elem_value_t *cval;
+ snd_aes_iec958_t iec958;
+ int from_stdin = 0;
+ int dumphex = 0;
+ int i, c, err;
+ unsigned int controls, cidx;
+ char tmpname[32];
+ int parms[IDX_LAST];
+
+ for (i = 0; i < IDX_LAST; i++)
+ parms[i] = -1; /* not set */
+
+ while ((c = getopt(argc, argv, "D:c:n:xhi")) != -1) {
+ switch (c) {
+ case 'D':
+ dev = optarg;
+ break;
+ case 'c':
+ i = atoi(optarg);
+ if (i < 0 || i >= 32) {
+ fprintf(stderr, "invalid card index %d\n", i);
+ return 1;
+ }
+ sprintf(tmpname, "hw:%d", i);
+ dev = tmpname;
+ break;
+ case 'n':
+ spdif_index = atoi(optarg);
+ break;
+ case 'x':
+ dumphex = 1;
+ break;
+ case 'i':
+ from_stdin = 1;
+ break;
+ default:
+ usage();
+ return 1;
+ }
+ }
+
+ if ((err = snd_ctl_open(&ctl, dev, 0)) < 0) {
+ error("snd_ctl_open", err);
+ return 1;
+ }
+
+ snd_ctl_elem_list_alloca(&clist);
+ if ((err = snd_ctl_elem_list(ctl, clist)) < 0) {
+ error("snd_ctl_elem_list", err);
+ return 1;
+ }
+ if ((err = snd_ctl_elem_list_alloc_space(clist, snd_ctl_elem_list_get_count(clist))) < 0) {
+ error("snd_ctl_elem_list_alloc_space", err);
+ return 1;
+ }
+ if ((err = snd_ctl_elem_list(ctl, clist)) < 0) {
+ error("snd_ctl_elem_list", err);
+ return 1;
+ }
+
+ controls = snd_ctl_elem_list_get_used(clist);
+ for (cidx = 0; cidx < controls; cidx++) {
+ if (!strcmp(snd_ctl_elem_list_get_name(clist, cidx), spdif_str))
+ if (spdif_index < 0 ||
+ snd_ctl_elem_list_get_index(clist, cidx) == spdif_index)
+ break;
+ }
+ if (cidx >= controls) {
+ fprintf(stderr, "control \"%s\" (index %d) not found\n",
+ spdif_str, spdif_index);
+ return 1;
+ }
+
+ snd_ctl_elem_id_alloca(&cid);
+ snd_ctl_elem_list_get_id(clist, cidx, cid);
+ snd_ctl_elem_value_alloca(&cval);
+ snd_ctl_elem_value_set_id(cval, cid);
+ if ((err = snd_ctl_elem_read(ctl, cval)) < 0) {
+ error("snd_ctl_elem_read", err);
+ return 1;
+ }
+
+ snd_ctl_elem_value_get_iec958(cval, &iec958);
+
+ /* parse from stdin */
+ if (from_stdin)
+ parse_file(parms, stdin);
+
+ /* parse commands */
+ for (c = optind; c < argc - 1; c += 2)
+ parse_command(parms, argv[c], argv[c + 1]);
+
+ if (update_iec958_status(&iec958, parms)) {
+ /* store the values */
+ snd_ctl_elem_value_set_iec958(cval, &iec958);
+ if ((err = snd_ctl_elem_write(ctl, cval)) < 0) {
+ error("snd_ctl_elem_write", err);
+ return 1;
+ }
+ if ((err = snd_ctl_elem_read(ctl, cval)) < 0) {
+ error("snd_ctl_elem_write", err);
+ return 1;
+ }
+ snd_ctl_elem_value_get_iec958(cval, &iec958);
+ }
+
+ if (dumphex)
+ printf("AES0=0x%02x,AES1=0x%02x,AES2=0x%02x,AES3=0x%02x\n",
+ iec958.status[0], iec958.status[1], iec958.status[2], iec958.status[3]);
+ else
+ dump_iec958(&iec958);
+
+ snd_ctl_close(ctl);
+ return 0;
+}
diff --git a/include/Makefile.am b/include/Makefile.am
new file mode 100644
index 0000000..7a3968d
--- /dev/null
+++ b/include/Makefile.am
@@ -0,0 +1,25 @@
+noinst_HEADERS=version.h gettext.h gettext_curses.h
+
+version.h: stamp-vh
+ @:
+
+stamp-vh: $(top_builddir)/configure.in
+ @echo "/*" > ver.tmp
+ @echo " * version.h" >> ver.tmp
+ @echo " */" >> ver.tmp
+ @echo "" >> ver.tmp
+ @echo "#define SND_UTIL_MAJOR $(SND_UTIL_MAJOR)" >> ver.tmp
+ @echo "#define SND_UTIL_MINOR $(SND_UTIL_MINOR)" >> ver.tmp
+ @echo "#define SND_UTIL_SUBMINOR $(SND_UTIL_SUBMINOR)" >> ver.tmp
+ @echo "#define SND_UTIL_VERSION ((SND_UTIL_MAJOR<<16)|\\" >> ver.tmp
+ @echo " (SND_UTIL_MINOR<<8)|\\" >> ver.tmp
+ @echo " SND_UTIL_SUBMINOR)" >> ver.tmp
+ @echo "#define SND_UTIL_VERSION_STR \"$(SND_UTIL_VERSION)\"" >> ver.tmp
+ @echo >> ver.tmp
+ @cmp -s version.h ver.tmp \
+ || (echo "Updating version.h"; \
+ cp ver.tmp version.h; \
+ echo timestamp > stamp-vh)
+ -@rm -f ver.tmp
+
+INCLUDES=-I$(top_srcdir)/include
diff --git a/include/Makefile.in b/include/Makefile.in
new file mode 100644
index 0000000..992f8c3
--- /dev/null
+++ b/include/Makefile.in
@@ -0,0 +1,507 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = include
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/aconfig.h.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+noinst_HEADERS = version.h gettext.h gettext_curses.h
+INCLUDES = -I$(top_srcdir)/include
+all: aconfig.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign include/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+aconfig.h: stamp-h1
+ @if test ! -f $@; then rm -f stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+
+stamp-h1: $(srcdir)/aconfig.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status include/aconfig.h
+$(srcdir)/aconfig.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f aconfig.h stamp-h1
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) aconfig.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) aconfig.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) aconfig.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) aconfig.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) aconfig.h
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ cscopelist ctags distclean distclean-generic distclean-hdr \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am
+
+
+version.h: stamp-vh
+ @:
+
+stamp-vh: $(top_builddir)/configure.in
+ @echo "/*" > ver.tmp
+ @echo " * version.h" >> ver.tmp
+ @echo " */" >> ver.tmp
+ @echo "" >> ver.tmp
+ @echo "#define SND_UTIL_MAJOR $(SND_UTIL_MAJOR)" >> ver.tmp
+ @echo "#define SND_UTIL_MINOR $(SND_UTIL_MINOR)" >> ver.tmp
+ @echo "#define SND_UTIL_SUBMINOR $(SND_UTIL_SUBMINOR)" >> ver.tmp
+ @echo "#define SND_UTIL_VERSION ((SND_UTIL_MAJOR<<16)|\\" >> ver.tmp
+ @echo " (SND_UTIL_MINOR<<8)|\\" >> ver.tmp
+ @echo " SND_UTIL_SUBMINOR)" >> ver.tmp
+ @echo "#define SND_UTIL_VERSION_STR \"$(SND_UTIL_VERSION)\"" >> ver.tmp
+ @echo >> ver.tmp
+ @cmp -s version.h ver.tmp \
+ || (echo "Updating version.h"; \
+ cp ver.tmp version.h; \
+ echo timestamp > stamp-vh)
+ -@rm -f ver.tmp
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/include/aconfig.h b/include/aconfig.h
new file mode 100644
index 0000000..7011e0b
--- /dev/null
+++ b/include/aconfig.h
@@ -0,0 +1,146 @@
+/* include/aconfig.h. Generated from aconfig.h.in by configure. */
+/* include/aconfig.h.in. Generated from configure.in by autoheader. */
+
+/* directory containing alsa configuration */
+#define DATADIR "/usr/share/alsa"
+
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
+#define ENABLE_NLS 1
+
+/* Define if curses-based programs can show translated messages. */
+#define ENABLE_NLS_IN_CURSES 1
+
+/* Define to 1 if you have the <alsa/mixer.h> header file. */
+#define HAVE_ALSA_MIXER_H 1
+
+/* Define to 1 if you have the <alsa/pcm.h> header file. */
+#define HAVE_ALSA_PCM_H 1
+
+/* Define to 1 if you have the <alsa/rawmidi.h> header file. */
+#define HAVE_ALSA_RAWMIDI_H 1
+
+/* Define to 1 if you have the <alsa/seq.h> header file. */
+#define HAVE_ALSA_SEQ_H 1
+
+/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
+ CoreFoundation framework. */
+/* #undef HAVE_CFLOCALECOPYCURRENT */
+
+/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
+ the CoreFoundation framework. */
+/* #undef HAVE_CFPREFERENCESCOPYAPPVALUE */
+
+/* Have clock gettime */
+#define HAVE_CLOCK_GETTIME 1
+
+/* Have curses set_escdelay */
+#define HAVE_CURSES_ESCDELAY 1
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
+#define HAVE_DCGETTEXT 1
+
+/* Define to 1 if you have the <form.h> header file. */
+#define HAVE_FORM_H 1
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#define HAVE_GETTEXT 1
+
+/* Define if you have the iconv() function and it works. */
+/* #undef HAVE_ICONV */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the `asound' library (-lasound). */
+#define HAVE_LIBASOUND 1
+
+/* Have librt */
+#define HAVE_LIBRT 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the <menu.h> header file. */
+#define HAVE_MENU_H 1
+
+/* Define to 1 if you have the <panel.h> header file. */
+#define HAVE_PANEL_H 1
+
+/* Define to 1 if you have the <samplerate.h> header file. */
+/* #undef HAVE_SAMPLERATE_H */
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Name of package */
+#define PACKAGE "alsa-utils"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME ""
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING ""
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME ""
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION ""
+
+/* directory containing sample data */
+#define SOUNDSDIR "/usr/share/sounds/alsa"
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#define TIME_WITH_SYS_TIME 1
+
+/* ALSA util version */
+#define VERSION "1.0.27.2"
+
+/* Enable large inode numbers on Mac OS X 10.5. */
+#ifndef _DARWIN_USE_64_BIT_INODE
+# define _DARWIN_USE_64_BIT_INODE 1
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+/* #undef _FILE_OFFSET_BITS */
+
+/* Define for large files, on AIX-style hosts. */
+/* #undef _LARGE_FILES */
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+/* #undef inline */
+#endif
diff --git a/include/aconfig.h.in b/include/aconfig.h.in
new file mode 100644
index 0000000..fbb4e75
--- /dev/null
+++ b/include/aconfig.h.in
@@ -0,0 +1,145 @@
+/* include/aconfig.h.in. Generated from configure.in by autoheader. */
+
+/* directory containing alsa configuration */
+#undef DATADIR
+
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
+#undef ENABLE_NLS
+
+/* Define if curses-based programs can show translated messages. */
+#undef ENABLE_NLS_IN_CURSES
+
+/* Define to 1 if you have the <alsa/mixer.h> header file. */
+#undef HAVE_ALSA_MIXER_H
+
+/* Define to 1 if you have the <alsa/pcm.h> header file. */
+#undef HAVE_ALSA_PCM_H
+
+/* Define to 1 if you have the <alsa/rawmidi.h> header file. */
+#undef HAVE_ALSA_RAWMIDI_H
+
+/* Define to 1 if you have the <alsa/seq.h> header file. */
+#undef HAVE_ALSA_SEQ_H
+
+/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
+ CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
+ the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
+/* Have clock gettime */
+#undef HAVE_CLOCK_GETTIME
+
+/* Have curses set_escdelay */
+#undef HAVE_CURSES_ESCDELAY
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the <form.h> header file. */
+#undef HAVE_FORM_H
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define if you have the iconv() function and it works. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `asound' library (-lasound). */
+#undef HAVE_LIBASOUND
+
+/* Have librt */
+#undef HAVE_LIBRT
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <menu.h> header file. */
+#undef HAVE_MENU_H
+
+/* Define to 1 if you have the <panel.h> header file. */
+#undef HAVE_PANEL_H
+
+/* Define to 1 if you have the <samplerate.h> header file. */
+#undef HAVE_SAMPLERATE_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* directory containing sample data */
+#undef SOUNDSDIR
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* ALSA util version */
+#undef VERSION
+
+/* Enable large inode numbers on Mac OS X 10.5. */
+#ifndef _DARWIN_USE_64_BIT_INODE
+# define _DARWIN_USE_64_BIT_INODE 1
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
diff --git a/include/gettext.h b/include/gettext.h
new file mode 100644
index 0000000..d8a1467
--- /dev/null
+++ b/include/gettext.h
@@ -0,0 +1,22 @@
+#ifndef __MY_GETTEXT_H
+#define __MY_GETTEXT_H
+
+#ifdef USES_CURSES
+#define ENABLE_NLS_TEST ENABLE_NLS_IN_CURSES
+#else
+#define ENABLE_NLS_TEST ENABLE_NLS
+#endif
+
+#if ENABLE_NLS_TEST
+# include <libintl.h>
+#else
+# define gettext(msgid) (msgid)
+# define textdomain(domain)
+# define bindtextdomain(domain, dir)
+#endif
+
+#define _(msgid) gettext (msgid)
+#define gettext_noop(msgid) msgid
+#define N_(msgid) gettext_noop (msgid)
+
+#endif /* __MY_GETTEXT_H */
diff --git a/include/gettext_curses.h b/include/gettext_curses.h
new file mode 100644
index 0000000..f1c4041
--- /dev/null
+++ b/include/gettext_curses.h
@@ -0,0 +1,2 @@
+#define USES_CURSES
+#include "gettext.h"
diff --git a/include/version.h b/include/version.h
new file mode 100644
index 0000000..cdda7cc
--- /dev/null
+++ b/include/version.h
@@ -0,0 +1,12 @@
+/*
+ * version.h
+ */
+
+#define SND_UTIL_MAJOR 1
+#define SND_UTIL_MINOR 0
+#define SND_UTIL_SUBMINOR 27
+#define SND_UTIL_VERSION ((SND_UTIL_MAJOR<<16)|\
+ (SND_UTIL_MINOR<<8)|\
+ SND_UTIL_SUBMINOR)
+#define SND_UTIL_VERSION_STR "1.0.27.2"
+
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..377bb86
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-11-20.07; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call 'install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for 'test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/m4/Makefile.am b/m4/Makefile.am
new file mode 100644
index 0000000..f759917
--- /dev/null
+++ b/m4/Makefile.am
@@ -0,0 +1 @@
+EXTRA_DIST = gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 gettext.m4
diff --git a/m4/Makefile.in b/m4/Makefile.in
new file mode 100644
index 0000000..e8150be
--- /dev/null
+++ b/m4/Makefile.in
@@ -0,0 +1,403 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = m4
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+EXTRA_DIST = gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 gettext.m4
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign m4/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign m4/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/m4/gettext.m4 b/m4/gettext.m4
new file mode 100644
index 0000000..f84e6a5
--- /dev/null
+++ b/m4/gettext.m4
@@ -0,0 +1,383 @@
+# gettext.m4 serial 63 (gettext-0.18)
+dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
+ [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define([gt_included_intl],
+ ifelse([$1], [external],
+ ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+ [yes]))
+ define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+ gt_NEEDS_INIT
+ AM_GNU_GETTEXT_NEED([$2])
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
+ gt_INTL_MACOSX
+
+ dnl Set USE_NLS.
+ AC_REQUIRE([AM_NLS])
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl Add a version number to the cache macros.
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH([included-gettext],
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+ [AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ [eval "$gt_func_gnugettext_libc=yes"],
+ [eval "$gt_func_gnugettext_libc=no"])])
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ [$gt_func_gnugettext_libintl],
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [eval "$gt_func_gnugettext_libintl=yes"],
+ [eval "$gt_func_gnugettext_libintl=no"])
+ dnl Now see whether libintl exists and depends on libiconv.
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ CATOBJEXT=
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Some extra flags are needed during linking.
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE([ENABLE_NLS], [1],
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ AC_MSG_CHECKING([whether to use NLS])
+ AC_MSG_RESULT([$USE_NLS])
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([where the gettext function comes from])
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ AC_MSG_RESULT([$gt_source])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE([HAVE_GETTEXT], [1],
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE([HAVE_DCGETTEXT], [1],
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST([BUILD_INCLUDED_LIBINTL])
+ AC_SUBST([USE_INCLUDED_LIBINTL])
+ AC_SUBST([CATOBJEXT])
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST([DATADIRNAME])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST([INSTOBJEXT])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST([GENCAT])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLOBJS=
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+ AC_SUBST([INTLOBJS])
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST([INTLLIBS])
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST([LIBINTL])
+ AC_SUBST([LTLIBINTL])
+ AC_SUBST([POSUB])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+ m4_divert_text([DEFAULTS], [gt_needs=])
+ m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff --git a/m4/iconv.m4 b/m4/iconv.m4
new file mode 100644
index 0000000..e2041b9
--- /dev/null
+++ b/m4/iconv.m4
@@ -0,0 +1,214 @@
+# iconv.m4 serial 11 (gettext-0.18.1)
+dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ [am_cv_func_iconv=yes])
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ [am_cv_lib_iconv=yes]
+ [am_cv_func_iconv=yes])
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
+ dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10.
+ am_save_LIBS="$LIBS"
+ if test $am_cv_lib_iconv = yes; then
+ LIBS="$LIBS $LIBICONV"
+ fi
+ AC_TRY_RUN([
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+ returns. */
+ {
+ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+ if (cd_utf8_to_88591 != (iconv_t)(-1))
+ {
+ static const char input[] = "\342\202\254"; /* EURO SIGN */
+ char buf[10];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_utf8_to_88591,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ return 1;
+ }
+ }
+ /* Test against Solaris 10 bug: Failures are not distinguishable from
+ successful returns. */
+ {
+ iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+ if (cd_ascii_to_88591 != (iconv_t)(-1))
+ {
+ static const char input[] = "\263";
+ char buf[10];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_ascii_to_88591,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ return 1;
+ }
+ }
+#if 0 /* This bug could be worked around by the caller. */
+ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
+ {
+ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+ if (cd_88591_to_utf8 != (iconv_t)(-1))
+ {
+ static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+ char buf[50];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_88591_to_utf8,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if ((int)res > 0)
+ return 1;
+ }
+ }
+#endif
+ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+ provided. */
+ if (/* Try standardized names. */
+ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+ /* Try IRIX, OSF/1 names. */
+ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+ /* Try AIX names. */
+ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+ /* Try HP-UX names. */
+ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+ return 1;
+ return 0;
+}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
+ [case "$host_os" in
+ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+ *) am_cv_func_iconv_works="guessing yes" ;;
+ esac])
+ LIBS="$am_save_LIBS"
+ ])
+ case "$am_cv_func_iconv_works" in
+ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+ *) am_func_iconv=yes ;;
+ esac
+ else
+ am_func_iconv=no am_cv_lib_iconv=no
+ fi
+ if test "$am_func_iconv" = yes; then
+ AC_DEFINE([HAVE_ICONV], [1],
+ [Define if you have the iconv() function and it works.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST([LIBICONV])
+ AC_SUBST([LTLIBICONV])
+])
+
+dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
+dnl avoid warnings like
+dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
+dnl This is tricky because of the way 'aclocal' is implemented:
+dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
+dnl Otherwise aclocal's initial scan pass would miss the macro definition.
+dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
+dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
+dnl warnings.
+m4_define([gl_iconv_AC_DEFUN],
+ m4_version_prereq([2.64],
+ [[AC_DEFUN_ONCE(
+ [$1], [$2])]],
+ [[AC_DEFUN(
+ [$1], [$2])]]))
+gl_iconv_AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL([am_cv_proto_iconv], [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"])
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([
+ $am_cv_proto_iconv])
+ AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4
new file mode 100644
index 0000000..ebb3052
--- /dev/null
+++ b/m4/lib-ld.m4
@@ -0,0 +1,110 @@
+# lib-ld.m4 serial 4 (gettext-0.18)
+dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL([acl_cv_path_LD],
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT([$LD])
+else
+ AC_MSG_RESULT([no])
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff --git a/m4/lib-link.m4 b/m4/lib-link.m4
new file mode 100644
index 0000000..c73bd8e
--- /dev/null
+++ b/m4/lib-link.m4
@@ -0,0 +1,774 @@
+# lib-link.m4 serial 21 (gettext-0.18)
+dnl Copyright (C) 2001-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.54])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ pushdef([Name],[translit([$1],[./-], [___])])
+ pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ AC_SUBST([LIB]NAME[_PREFIX])
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ popdef([NAME])
+ popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ pushdef([Name],[translit([$1],[./-], [___])])
+ pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+ dnl because these -l options might require -L options that are present in
+ dnl LIBS. -l options benefit only from the -L options listed before it.
+ dnl Otherwise, add it to the front of LIBS, because it may be a static
+ dnl library that depends on another static library that is present in LIBS.
+ dnl Static libraries benefit only from the static libraries listed after
+ dnl it.
+ case " $LIB[]NAME" in
+ *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+ *) LIBS="$LIB[]NAME $LIBS" ;;
+ esac
+ AC_TRY_LINK([$3], [$4],
+ [ac_cv_lib[]Name=yes],
+ [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ LIB[]NAME[]_PREFIX=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ AC_SUBST([LIB]NAME[_PREFIX])
+ popdef([NAME])
+ popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl acl_libext,
+dnl acl_shlibext,
+dnl acl_hardcode_libdir_flag_spec,
+dnl acl_hardcode_libdir_separator,
+dnl acl_hardcode_direct,
+dnl acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ acl_libext="$acl_cv_libext"
+ acl_shlibext="$acl_cv_shlibext"
+ acl_libname_spec="$acl_cv_libname_spec"
+ acl_library_names_spec="$acl_cv_library_names_spec"
+ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ acl_hardcode_direct="$acl_cv_hardcode_direct"
+ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE([rpath],
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+ pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ define([acl_frompackage_]NAME, [$2])
+ popdef([NAME])
+ pushdef([PACK],[$2])
+ pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ define([acl_libsinpackage_]PACKUP,
+ m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1])
+ popdef([PACKUP])
+ popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+ pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+ dnl Autoconf >= 2.61 supports dots in --with options.
+ pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_ARG_WITH(P_A_C_K[-prefix],
+[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib
+ --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ if test "$acl_libdirstem2" != "$acl_libdirstem" \
+ && ! test -d "$withval/$acl_libdirstem"; then
+ additional_libdir="$withval/$acl_libdirstem2"
+ fi
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ LIB[]NAME[]_PREFIX=
+ dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+ dnl computed. So it has to be reset here.
+ HAVE_LIB[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ dnl The same code as in the loop below:
+ dnl First look for a shared library.
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ dnl Then look for a static library.
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ dnl First look for a shared library.
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ dnl Then look for a static library.
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+ || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$acl_hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ if test "$name" = '$1'; then
+ LIB[]NAME[]_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ */$acl_libdirstem2 | */$acl_libdirstem2/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+ if test "$name" = '$1'; then
+ LIB[]NAME[]_PREFIX="$basedir"
+ fi
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+ && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+ || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+ popdef([P_A_C_K])
+ popdef([PACKLIBS])
+ popdef([PACKUP])
+ popdef([PACK])
+ popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+ AC_REQUIRE([AC_LIB_RPATH])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ $1=
+ if test "$enable_rpath" != no; then
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode directories into the resulting
+ dnl binary.
+ rpathdirs=
+ next=
+ for opt in $2; do
+ if test -n "$next"; then
+ dir="$next"
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem" \
+ && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next=
+ else
+ case $opt in
+ -L) next=yes ;;
+ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem" \
+ && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next= ;;
+ *) next= ;;
+ esac
+ fi
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n ""$3""; then
+ dnl libtool is used for linking. Use -R options.
+ for dir in $rpathdirs; do
+ $1="${$1}${$1:+ }-R$dir"
+ done
+ else
+ dnl The linker is used for linking directly.
+ if test -n "$acl_hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user
+ dnl must pass all path elements in one option.
+ alldirs=
+ for dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="${$1}${$1:+ }$flag"
+ done
+ fi
+ fi
+ fi
+ fi
+ fi
+ AC_SUBST([$1])
+])
diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4
new file mode 100644
index 0000000..1601cea
--- /dev/null
+++ b/m4/lib-prefix.m4
@@ -0,0 +1,224 @@
+# lib-prefix.m4 serial 7 (gettext-0.18)
+dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+ dnl There is no formal standard regarding lib and lib64.
+ dnl On glibc systems, the current practice is that on a system supporting
+ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+ dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+ dnl the compiler's default mode by looking at the compiler's library search
+ dnl path. If at least one of its elements ends in /lib64 or points to a
+ dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+ dnl Otherwise we use the default, namely "lib".
+ dnl On Solaris systems, the current practice is that on a system supporting
+ dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+ dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+ dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ acl_libdirstem=lib
+ acl_libdirstem2=
+ case "$host_os" in
+ solaris*)
+ dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
+ dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
+ dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+ dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+ dnl symlink is missing, so we set acl_libdirstem2 too.
+ AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+ [AC_EGREP_CPP([sixtyfour bits], [
+#ifdef _LP64
+sixtyfour bits
+#endif
+ ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
+ ])
+ if test $gl_cv_solaris_64bit = yes; then
+ acl_libdirstem=lib/64
+ case "$host_cpu" in
+ sparc*) acl_libdirstem2=lib/sparcv9 ;;
+ i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+ esac
+ fi
+ ;;
+ *)
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ */../ | */.. )
+ # Better ignore directories of this form. They are misleading.
+ ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+ ;;
+ esac
+ test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+])
diff --git a/m4/nls.m4 b/m4/nls.m4
new file mode 100644
index 0000000..003704c
--- /dev/null
+++ b/m4/nls.m4
@@ -0,0 +1,32 @@
+# nls.m4 serial 5 (gettext-0.18)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_NLS],
+[
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE([nls],
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT([$USE_NLS])
+ AC_SUBST([USE_NLS])
+])
diff --git a/m4/po.m4 b/m4/po.m4
new file mode 100644
index 0000000..47f36a4
--- /dev/null
+++ b/m4/po.m4
@@ -0,0 +1,449 @@
+# po.m4 serial 17 (gettext-0.18)
+dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Release version of the gettext macros. This is used to ensure that
+ dnl the gettext macros and po/Makefile.in.in are in sync.
+ AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+ dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([GMSGFMT_015])
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([XGETTEXT_015])
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+ dnl Installation directories.
+ dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+ dnl have to define it here, so that it can be used in po/Makefile.
+ test -n "$localedir" || localedir='${datadir}/locale'
+ AC_SUBST([localedir])
+
+ dnl Support for AM_XGETTEXT_OPTION.
+ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+ AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+ AC_CONFIG_COMMANDS([po-directories], [[
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done]],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+ # When this code is run, in config.status, two variables have already been
+ # set:
+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+ # - LINGUAS is the value of the environment variable LINGUAS at configure
+ # time.
+
+changequote(,)dnl
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ # Find a way to echo strings without interpreting backslash.
+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='echo'
+ else
+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='printf %s\n'
+ else
+ echo_func () {
+ cat <<EOT
+$*
+EOT
+ }
+ gt_echo='echo_func'
+ fi
+ fi
+
+ # A sed script that extracts the value of VARIABLE from a Makefile.
+ sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^[ ]*VARIABLE[ ]*=/{
+ # Seen the first line of the variable definition.
+ s/^[ ]*VARIABLE[ ]*=//
+ ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+ # Set POTFILES to the value of the Makefile variable POTFILES.
+ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+ # Compute POTFILES_DEPS as
+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+ POTFILES_DEPS=
+ for file in $POTFILES; do
+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+ done
+ POMAKEFILEDEPS=""
+
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+ fi
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ # Compute PROPERTIESFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+ # Compute CLASSFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+ # Compute QMFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+ # Compute MSGFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+ # Compute RESOURCESDLLFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ PROPERTIESFILES=
+ CLASSFILES=
+ QMFILES=
+ MSGFILES=
+ RESOURCESDLLFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+ QMFILES="$QMFILES $srcdirpre$lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ JAVACATALOGS=
+ QTCATALOGS=
+ TCLCATALOGS=
+ CSHARPCATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+ QTCATALOGS="$QTCATALOGS $lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ fi
+
+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+ @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+ \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+ @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+ \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if test -n "$POMAKEFILEDEPS"; then
+ cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+ fi
+ mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+ XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+ AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff --git a/m4/progtest.m4 b/m4/progtest.m4
new file mode 100644
index 0000000..2d804ac
--- /dev/null
+++ b/m4/progtest.m4
@@ -0,0 +1,92 @@
+# progtest.m4 serial 6 (gettext-0.18)
+dnl Copyright (C) 1996-2003, 2005, 2008-2010 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ([2.50])
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL([ac_cv_path_$1],
+[case "[$]$1" in
+ [[\\/]]* | ?:[[\\/]]*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$][$1])
+else
+ AC_MSG_RESULT([no])
+fi
+AC_SUBST([$1])dnl
+])
diff --git a/missing b/missing
new file mode 100755
index 0000000..9a55648
--- /dev/null
+++ b/missing
@@ -0,0 +1,330 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2012-01-06.18; # UTC
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, 'missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file 'aclocal.m4'
+ autoconf touch file 'configure'
+ autoheader touch file 'config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all 'Makefile.in' files
+ bison create 'y.tab.[ch]', if possible, from existing .[ch]
+ flex create 'lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create 'lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create 'y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running '$TOOL --version' or '$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified 'acinclude.m4' or '${configure_ac}'. You might want
+ to install the Automake and Perl packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified '${configure_ac}'. You might want to install the
+ Autoconf and GNU m4 packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified 'acconfig.h' or '${configure_ac}'. You might want
+ to install the Autoconf and GNU m4 packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
+ You might want to install the Automake and Perl packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: '$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get '$1' as part of Autoconf from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: '$1' $msg. You should only need it if
+ you modified a '.y' file. You may need the Bison package
+ in order for those modifications to take effect. You can get
+ Bison from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified a '.l' file. You may need the Flex package
+ in order for those modifications to take effect. You can get
+ Flex from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ Help2man package in order for those modifications to take
+ effect. You can get Help2man from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: '$1' is $msg. You should only need it if
+ you modified a '.texi' or '.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy 'make' (AIX,
+ DU, IRIX). You might want to install the Texinfo package or
+ the GNU make package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: '$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the 'README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing '$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/po/LINGUAS b/po/LINGUAS
new file mode 100644
index 0000000..2027386
--- /dev/null
+++ b/po/LINGUAS
@@ -0,0 +1 @@
+de fr ja
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
new file mode 100644
index 0000000..83d8838
--- /dev/null
+++ b/po/Makefile.in.in
@@ -0,0 +1,444 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.18
+GETTEXT_MACRO_VERSION = 0.18
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: check-macro-version all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+check-macro-version:
+ @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+ exit 1; \
+ }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
+ package_gnu='GNU '; \
+ else \
+ package_gnu=''; \
+ fi; \
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
+ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ *) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --package-name="$${package_gnu}@PACKAGE@" \
+ --package-version='@VERSION@' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ esac
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) \
+ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
+ esac; \
+ }; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+ *) \
+ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+ esac; \
+ }; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/po/Makevars b/po/Makevars
new file mode 100644
index 0000000..779d8ac
--- /dev/null
+++ b/po/Makevars
@@ -0,0 +1,41 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = The ALSA Team
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
diff --git a/po/POTFILES.in b/po/POTFILES.in
new file mode 100644
index 0000000..3d1b8ea
--- /dev/null
+++ b/po/POTFILES.in
@@ -0,0 +1,12 @@
+alsamixer/card_select.c
+alsamixer/cli.c
+alsamixer/device_name.c
+alsamixer/die.c
+alsamixer/mixer_display.c
+alsamixer/mixer_widget.c
+alsamixer/proc_files.c
+alsamixer/textbox.c
+aplay/aplay.c
+seq/aconnect/aconnect.c
+seq/aseqnet/aseqnet.c
+speaker-test/speaker-test.c
diff --git a/po/Rules-quot b/po/Rules-quot
new file mode 100644
index 0000000..af52487
--- /dev/null
+++ b/po/Rules-quot
@@ -0,0 +1,47 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
diff --git a/po/alsa-utils.pot b/po/alsa-utils.pot
new file mode 100644
index 0000000..e153aa1
--- /dev/null
+++ b/po/alsa-utils.pot
@@ -0,0 +1,1528 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR The ALSA Team
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: alsa-utils 1.0.27.2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: alsamixer/card_select.c:126 alsamixer/device_name.c:126
+msgid "Sound Card"
+msgstr ""
+
+#: alsamixer/card_select.c:181
+msgid "(default)"
+msgstr ""
+
+#: alsamixer/card_select.c:191
+msgid "cannot enumerate sound cards"
+msgstr ""
+
+#: alsamixer/card_select.c:215
+msgid "enter device name..."
+msgstr ""
+
+#: alsamixer/cli.c:40
+msgid "Usage: alsamixer [options]"
+msgstr ""
+
+#: alsamixer/cli.c:41
+msgid ""
+"Useful options:\n"
+" -h, --help this help\n"
+" -c, --card=NUMBER sound card number or id\n"
+" -D, --device=NAME mixer device name\n"
+" -V, --view=MODE starting view mode: playback/capture/all"
+msgstr ""
+
+#: alsamixer/cli.c:46
+msgid ""
+"Debugging options:\n"
+" -g, --no-color toggle using of colors\n"
+" -a, --abstraction=NAME mixer abstraction level: none/basic"
+msgstr ""
+
+#: alsamixer/cli.c:77
+#, c-format
+msgid "invalid card index: %s\n"
+msgstr ""
+
+#: alsamixer/cli.c:103
+#, c-format
+msgid "unknown abstraction level: %s\n"
+msgstr ""
+
+#: alsamixer/cli.c:108
+#, c-format
+msgid "unknown option: %c\n"
+msgstr ""
+
+#: alsamixer/cli.c:110
+msgid "try `alsamixer --help' for more information\n"
+msgstr ""
+
+#: alsamixer/device_name.c:177
+msgid "Device name:"
+msgstr ""
+
+#: alsamixer/die.c:37
+#, c-format
+msgid "%s: %s\n"
+msgstr ""
+
+#: alsamixer/mixer_display.c:98
+msgid "Card:"
+msgstr ""
+
+#: alsamixer/mixer_display.c:99
+msgid "Chip:"
+msgstr ""
+
+#: alsamixer/mixer_display.c:100
+msgid "View:"
+msgstr ""
+
+#: alsamixer/mixer_display.c:101
+msgid "Item:"
+msgstr ""
+
+#: alsamixer/mixer_display.c:104
+msgid "F1: Help"
+msgstr ""
+
+#: alsamixer/mixer_display.c:105
+msgid "F2: System information"
+msgstr ""
+
+#: alsamixer/mixer_display.c:106
+msgid "F6: Select sound card"
+msgstr ""
+
+#: alsamixer/mixer_display.c:107
+msgid "Esc: Exit"
+msgstr ""
+
+#: alsamixer/mixer_display.c:174
+msgid "(unplugged)"
+msgstr ""
+
+#: alsamixer/mixer_display.c:192
+msgid "Playback"
+msgstr ""
+
+#: alsamixer/mixer_display.c:193
+msgid "Capture"
+msgstr ""
+
+#: alsamixer/mixer_display.c:194
+msgid "All"
+msgstr ""
+
+#: alsamixer/mixer_display.c:234
+msgid "mute"
+msgstr ""
+
+#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+msgid "dB gain:"
+msgstr ""
+
+#: alsamixer/mixer_display.c:285
+#, c-format
+msgid " [%s %s, %s]"
+msgstr ""
+
+#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
+#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+msgid "Off"
+msgstr ""
+
+#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+msgid "On"
+msgstr ""
+
+#: alsamixer/mixer_display.c:363
+msgid "The sound device was unplugged."
+msgstr ""
+
+#: alsamixer/mixer_display.c:364
+msgid "Press F6 to select another sound card."
+msgstr ""
+
+#: alsamixer/mixer_display.c:379
+msgid "This sound device does not have any playback controls."
+msgstr ""
+
+#: alsamixer/mixer_display.c:381
+msgid "This sound device does not have any capture controls."
+msgstr ""
+
+#: alsamixer/mixer_display.c:383
+msgid "This sound device does not have any controls."
+msgstr ""
+
+#. TRANSLATORS: playback on; one character
+#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+msgid "O"
+msgstr ""
+
+#. TRANSLATORS: playback muted; one character
+#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+msgid "M"
+msgstr ""
+
+#. TRANSLATORS: "left"; no more than two characters
+#: alsamixer/mixer_display.c:536
+msgid "L"
+msgstr ""
+
+#. TRANSLATORS: "right"; no more than two characters
+#: alsamixer/mixer_display.c:540
+msgid "R"
+msgstr ""
+
+#. TRANSLATORS: no more than eight characters
+#: alsamixer/mixer_display.c:542
+msgid "CAPTURE"
+msgstr ""
+
+#: alsamixer/mixer_display.c:592
+msgid "Front"
+msgstr ""
+
+#: alsamixer/mixer_display.c:595
+msgid "Rear"
+msgstr ""
+
+#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+msgid "Center"
+msgstr ""
+
+#: alsamixer/mixer_display.c:601
+msgid "Woofer"
+msgstr ""
+
+#: alsamixer/mixer_display.c:604
+msgid "Side"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+msgid "cannot open mixer"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+msgid "cannot load mixer controls"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:169
+#, c-format
+msgid "Cannot open mixer device '%s'."
+msgstr ""
+
+#: alsamixer/mixer_widget.c:190
+msgid "Esc Exit"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:191
+msgid "F1 ? H Help"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:192
+msgid "F2 / System information"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:193
+msgid "F3 Show playback controls"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:194
+msgid "F4 Show capture controls"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:195
+msgid "F5 Show all controls"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:196
+msgid "Tab Toggle view mode (F3/F4/F5)"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:197
+msgid "F6 S Select sound card"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:198
+msgid "L Redraw screen"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:200
+msgid "Left Move to the previous control"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:201
+msgid "Right Move to the next control"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:203
+msgid "Up/Down Change volume"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:204
+msgid "+ - Change volume"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:205
+msgid "Page Up/Dn Change volume in big steps"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:206
+msgid "End Set volume to 0%"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:207
+msgid "0-9 Set volume to 0%-90%"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:208
+msgid "Q W E Increase left/both/right volumes"
+msgstr ""
+
+#. TRANSLATORS: or Y instead of Z
+#: alsamixer/mixer_widget.c:210
+msgid "Z X C Decrease left/both/right volumes"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:211
+msgid "B Balance left and right volumes"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:213
+msgid "M Toggle mute"
+msgstr ""
+
+#. TRANSLATORS: or , .
+#: alsamixer/mixer_widget.c:215
+msgid "< > Toggle left/right mute"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:217
+msgid "Space Toggle capture"
+msgstr ""
+
+#. TRANSLATORS: or Insert Delete
+#: alsamixer/mixer_widget.c:219
+msgid "; ' Toggle left/right capture"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:221
+msgid "Authors:"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:222
+msgid " Tim Janik"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:223
+msgid " Jaroslav Kysela <perex@perex.cz>"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:224
+msgid " Clemens Ladisch <clemens@ladisch.de>"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:226
+msgid "Help"
+msgstr ""
+
+#: alsamixer/proc_files.c:103
+msgid "Select File"
+msgstr ""
+
+#: alsamixer/textbox.c:52 alsamixer/textbox.c:66
+msgid "Error"
+msgstr ""
+
+#: alsamixer/textbox.c:80
+#, c-format
+msgid "Cannot open file \"%s\"."
+msgstr ""
+
+#: aplay/aplay.c:175
+msgid "raw data"
+msgstr ""
+
+#: aplay/aplay.c:176
+msgid "VOC"
+msgstr ""
+
+#: aplay/aplay.c:178
+msgid "WAVE"
+msgstr ""
+
+#: aplay/aplay.c:179
+msgid "Sparc Audio"
+msgstr ""
+
+#: aplay/aplay.c:200
+#, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"\n"
+"-h, --help help\n"
+" --version print current version\n"
+"-l, --list-devices list all soundcards and digital audio devices\n"
+"-L, --list-pcms list device names\n"
+"-D, --device=NAME select PCM by name\n"
+"-q, --quiet quiet mode\n"
+"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
+"-c, --channels=# channels\n"
+"-f, --format=FORMAT sample format (case insensitive)\n"
+"-r, --rate=# sample rate\n"
+"-d, --duration=# interrupt after # seconds\n"
+"-M, --mmap mmap stream\n"
+"-N, --nonblock nonblocking mode\n"
+"-F, --period-time=# distance between interrupts is # microseconds\n"
+"-B, --buffer-time=# buffer duration is # microseconds\n"
+" --period-size=# distance between interrupts is # frames\n"
+" --buffer-size=# buffer duration is # frames\n"
+"-A, --avail-min=# min available space for wakeup is # microseconds\n"
+"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
+" (relative to buffer size if <= 0)\n"
+"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from "
+"xrun\n"
+"-v, --verbose show PCM structure and setup (accumulative)\n"
+"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
+"-I, --separate-channels one file for each channel\n"
+"-i, --interactive allow interactive operation from stdin\n"
+"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
+" --disable-resample disable automatic rate resample\n"
+" --disable-channels disable automatic channel conversions\n"
+" --disable-format disable automatic format conversions\n"
+" --disable-softvol disable software volume control (softvol)\n"
+" --test-position test ring buffer position\n"
+" --test-coef=# test coefficient for ring buffer position (default "
+"8)\n"
+" expression for validation is: coef * (buffer_size / "
+"2)\n"
+" --test-nowait do not wait for ring buffer - eats whole CPU\n"
+" --max-file-time=# start another output file when the old file has "
+"recorded\n"
+" for this many seconds\n"
+" --process-id-file write the process ID here\n"
+" --use-strftime apply the strftime facility to the output file name\n"
+" --dump-hw-params dump hw_params of the device\n"
+" --fatal-errors treat all errors as fatal\n"
+msgstr ""
+
+#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#, c-format
+msgid "Recognized sample formats are:"
+msgstr ""
+
+#: aplay/aplay.c:250
+#, c-format
+msgid ""
+"\n"
+"Some of these may not be available on selected hardware\n"
+msgstr ""
+
+#: aplay/aplay.c:251
+#, c-format
+msgid "The available format shortcuts are:\n"
+msgstr ""
+
+#: aplay/aplay.c:252
+#, c-format
+msgid "-f cd (16 bit little endian, 44100, stereo)\n"
+msgstr ""
+
+#: aplay/aplay.c:253
+#, c-format
+msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
+msgstr ""
+
+#: aplay/aplay.c:254
+#, c-format
+msgid "-f dat (16 bit little endian, 48000, stereo)\n"
+msgstr ""
+
+#: aplay/aplay.c:268
+msgid "no soundcards found..."
+msgstr ""
+
+#: aplay/aplay.c:271
+#, c-format
+msgid "**** List of %s Hardware Devices ****\n"
+msgstr ""
+
+#: aplay/aplay.c:300
+#, c-format
+msgid "card %i: %s [%s], device %i: %s [%s]\n"
+msgstr ""
+
+#: aplay/aplay.c:306
+#, c-format
+msgid " Subdevices: %i/%i\n"
+msgstr ""
+
+#: aplay/aplay.c:313
+#, c-format
+msgid " Subdevice #%i: %s\n"
+msgstr ""
+
+#: aplay/aplay.c:394
+#, c-format
+msgid "Aborted by signal %s...\n"
+msgstr ""
+
+#: aplay/aplay.c:512
+msgid "command should be named either arecord or aplay"
+msgstr ""
+
+#: aplay/aplay.c:556
+#, c-format
+msgid "unrecognized file format %s"
+msgstr ""
+
+#: aplay/aplay.c:563
+#, c-format
+msgid "value %i for channels is invalid"
+msgstr ""
+
+#: aplay/aplay.c:582
+#, c-format
+msgid "wrong extended format '%s'"
+msgstr ""
+
+#: aplay/aplay.c:593
+#, c-format
+msgid "bad speed value %i"
+msgstr ""
+
+#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
+#, c-format
+msgid "Unable to parse channel map string: %s\n"
+msgstr ""
+
+#: aplay/aplay.c:706
+#, c-format
+msgid "Try `%s --help' for more information.\n"
+msgstr ""
+
+#: aplay/aplay.c:722
+#, c-format
+msgid "audio open error: %s"
+msgstr ""
+
+#: aplay/aplay.c:727
+#, c-format
+msgid "info error: %s"
+msgstr ""
+
+#: aplay/aplay.c:734
+#, c-format
+msgid "nonblock setting error: %s"
+msgstr ""
+
+#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
+#: aplay/aplay.c:1867 aplay/aplay.c:1897
+msgid "not enough memory"
+msgstr ""
+
+#: aplay/aplay.c:768
+#, c-format
+msgid "Cannot create process ID file %s: %s"
+msgstr ""
+
+#: aplay/aplay.c:858
+#, c-format
+msgid "read error (called from line %i)"
+msgstr ""
+
+#: aplay/aplay.c:925
+#, c-format
+msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+
+#: aplay/aplay.c:936
+#, c-format
+msgid ""
+"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+
+#: aplay/aplay.c:941
+msgid "wrong format tag in extensible 'fmt ' chunk"
+msgstr ""
+
+#: aplay/aplay.c:948
+#, c-format
+msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
+msgstr ""
+
+#: aplay/aplay.c:953
+#, c-format
+msgid "can't play WAVE-files with %d tracks"
+msgstr ""
+
+#: aplay/aplay.c:961 aplay/aplay.c:1087
+#, c-format
+msgid "Warning: format is changed to U8\n"
+msgstr ""
+
+#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
+#, c-format
+msgid "Warning: format is changed to %s\n"
+msgstr ""
+
+#: aplay/aplay.c:1000
+#, c-format
+msgid ""
+" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
+msgstr ""
+
+#: aplay/aplay.c:1023
+#, c-format
+msgid " can't play WAVE-files with sample %d bits wide"
+msgstr ""
+
+#: aplay/aplay.c:1081
+#, c-format
+msgid "Warning: format is changed to MU_LAW\n"
+msgstr ""
+
+#: aplay/aplay.c:1093
+#, c-format
+msgid "Warning: format is changed to S16_BE\n"
+msgstr ""
+
+#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
+#: aplay/aplay.c:2727
+msgid "read error"
+msgstr ""
+
+#: aplay/aplay.c:1136
+msgid "Channel numbers don't match between hw_params and channel map"
+msgstr ""
+
+#: aplay/aplay.c:1145
+#, c-format
+msgid "Warning: unable to get channel map\n"
+msgstr ""
+
+#: aplay/aplay.c:1178
+#, c-format
+msgid "Channel %d doesn't match with hw_parmas"
+msgstr ""
+
+#: aplay/aplay.c:1204
+msgid "Broken configuration for this PCM: no configurations available"
+msgstr ""
+
+#: aplay/aplay.c:1208
+#, c-format
+msgid "HW Params of device \"%s\":\n"
+msgstr ""
+
+#: aplay/aplay.c:1228
+msgid "Access type not available"
+msgstr ""
+
+#: aplay/aplay.c:1233
+msgid "Sample format non available"
+msgstr ""
+
+#: aplay/aplay.c:1239
+msgid "Channels count non available"
+msgstr ""
+
+#: aplay/aplay.c:1254
+#, c-format
+msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
+msgstr ""
+
+#: aplay/aplay.c:1260
+#, c-format
+msgid " please, try the plug plugin %s\n"
+msgstr ""
+
+#: aplay/aplay.c:1297
+msgid "Unable to install hw params:"
+msgstr ""
+
+#: aplay/aplay.c:1304
+#, c-format
+msgid "Can't use period equal to buffer size (%lu == %lu)"
+msgstr ""
+
+#: aplay/aplay.c:1335
+msgid "unable to install sw params:"
+msgstr ""
+
+#: aplay/aplay.c:1369
+#, c-format
+msgid "snd_pcm_mmap_begin problem: %s"
+msgstr ""
+
+#: aplay/aplay.c:1398
+#, c-format
+msgid "stdin O_NONBLOCK flag setup failed\n"
+msgstr ""
+
+#: aplay/aplay.c:1422
+#, c-format
+msgid "\rPAUSE command ignored (no hw support)\n"
+msgstr ""
+
+#: aplay/aplay.c:1427
+#, c-format
+msgid "pause push error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1436
+#, c-format
+msgid "pause release error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1452
+#, c-format
+msgid ""
+"\r=== PAUSE === "
+msgstr ""
+
+#: aplay/aplay.c:1494
+#, c-format
+msgid "status error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1499
+#, c-format
+msgid "fatal %s: %s"
+msgstr ""
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
+msgid "underrun"
+msgstr ""
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
+msgid "overrun"
+msgstr ""
+
+#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#, c-format
+msgid "%s!!! (at least %.3f ms long)\n"
+msgstr ""
+
+#: aplay/aplay.c:1526
+#, c-format
+msgid "Status:\n"
+msgstr ""
+
+#: aplay/aplay.c:1530
+#, c-format
+msgid "xrun: prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1536
+#, c-format
+msgid "Status(DRAINING):\n"
+msgstr ""
+
+#: aplay/aplay.c:1540
+#, c-format
+msgid "capture stream format change? attempting recover...\n"
+msgstr ""
+
+#: aplay/aplay.c:1542
+#, c-format
+msgid "xrun(DRAINING): prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1549
+#, c-format
+msgid "Status(R/W):\n"
+msgstr ""
+
+#: aplay/aplay.c:1552
+#, c-format
+msgid "read/write error, state = %s"
+msgstr ""
+
+#: aplay/aplay.c:1562
+#, c-format
+msgid "Suspended. Trying resume. "
+msgstr ""
+
+#: aplay/aplay.c:1567
+#, c-format
+msgid "Failed. Restarting stream. "
+msgstr ""
+
+#: aplay/aplay.c:1569
+#, c-format
+msgid "suspend: prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1574
+#, c-format
+msgid "Done.\n"
+msgstr ""
+
+#: aplay/aplay.c:1596
+#, c-format
+msgid " !clip "
+msgstr ""
+
+#: aplay/aplay.c:1743
+#, c-format
+msgid "Unsupported bit size %d.\n"
+msgstr ""
+
+#: aplay/aplay.c:1777
+#, c-format
+msgid "Max peak (%li samples): 0x%08x "
+msgstr ""
+
+#: aplay/aplay.c:1811
+#, c-format
+msgid ""
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
+"%li\n"
+msgstr ""
+
+#: aplay/aplay.c:1939
+#, c-format
+msgid "write error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1987
+#, c-format
+msgid "writev error: %s"
+msgstr ""
+
+#: aplay/aplay.c:2031
+#, c-format
+msgid "read error: %s"
+msgstr ""
+
+#: aplay/aplay.c:2075
+#, c-format
+msgid "readv error: %s"
+msgstr ""
+
+#: aplay/aplay.c:2123
+msgid "can't allocate buffer for silence"
+msgstr ""
+
+#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
+#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
+#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+msgid "write error"
+msgstr ""
+
+#: aplay/aplay.c:2145
+#, c-format
+msgid "voc_pcm_flush - silence error"
+msgstr ""
+
+#: aplay/aplay.c:2148
+msgid "voc_pcm_flush error"
+msgstr ""
+
+#: aplay/aplay.c:2173
+msgid "malloc error"
+msgstr ""
+
+#: aplay/aplay.c:2177
+#, c-format
+msgid "Playing Creative Labs Channel file '%s'...\n"
+msgstr ""
+
+#: aplay/aplay.c:2245 aplay/aplay.c:2340
+msgid "can't play packed .voc files"
+msgstr ""
+
+#: aplay/aplay.c:2300
+#, c-format
+msgid "can't play loops; %s isn't seekable\n"
+msgstr ""
+
+#: aplay/aplay.c:2349
+#, c-format
+msgid "unknown blocktype %d. terminate."
+msgstr ""
+
+#: aplay/aplay.c:2480
+#, c-format
+msgid "Wave doesn't support %s format..."
+msgstr ""
+
+#: aplay/aplay.c:2540
+#, c-format
+msgid "Sparc Audio doesn't support %s format..."
+msgstr ""
+
+#: aplay/aplay.c:2621
+msgid "Playing"
+msgstr ""
+
+#: aplay/aplay.c:2621
+msgid "Recording"
+msgstr ""
+
+#: aplay/aplay.c:2625
+#, c-format
+msgid "Rate %d Hz, "
+msgstr ""
+
+#: aplay/aplay.c:2627
+#, c-format
+msgid "Mono"
+msgstr ""
+
+#: aplay/aplay.c:2629
+#, c-format
+msgid "Stereo"
+msgstr ""
+
+#: aplay/aplay.c:2631
+#, c-format
+msgid "Channels %i"
+msgstr ""
+
+#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#, c-format
+msgid "You need to specify %d files"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:49
+#, c-format
+msgid "aconnect - ALSA sequencer connection manager\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:50
+#, c-format
+msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:51
+#, c-format
+msgid "Usage:\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:52
+#, c-format
+msgid " * Connection/disconnection between two ports\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:53
+#, c-format
+msgid " aconnect [-options] sender receiver\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:54
+#, c-format
+msgid " sender, receiver = client:port pair\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:55
+#, c-format
+msgid " -d,--disconnect disconnect\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:56
+#, c-format
+msgid " -e,--exclusive exclusive connection\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:57
+#, c-format
+msgid " -r,--real # convert real-time-stamp on queue\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:58
+#, c-format
+msgid " -t,--tick # convert tick-time-stamp on queue\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:59
+#, c-format
+msgid " * List connected ports (no subscription action)\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:60
+#, c-format
+msgid " aconnect -i|-o [-options]\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:61
+#, c-format
+msgid " -i,--input list input (readable) ports\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:62
+#, c-format
+msgid " -o,--output list output (writable) ports\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:63
+#, c-format
+msgid " -l,--list list current connections of each port\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:64
+#, c-format
+msgid " * Remove all exported connections\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:65
+#, c-format
+msgid " -x, --removeall\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:132
+msgid "Connecting To"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:133
+msgid "Connected From"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:169
+#, c-format
+msgid "client %d: '%s' [type=%s]\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:173
+msgid "user"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:173
+msgid "kernel"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:307
+#, c-format
+msgid "can't open sequencer\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:335
+#, c-format
+msgid "can't get client id\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:342
+#, c-format
+msgid "can't set client info\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:349
+#, c-format
+msgid "invalid sender address %s\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
+#, c-format
+msgid "invalid destination address %s\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:368
+#, c-format
+msgid "No subscription is found\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:373
+#, c-format
+msgid "Disconnection failed (%s)\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:379
+#, c-format
+msgid "Connection is already subscribed\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:384
+#, c-format
+msgid "Connection failed (%s)\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:164
+#, c-format
+msgid "aseqnet - network client/server on ALSA sequencer\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:165
+#, c-format
+msgid " Copyright (C) 1999 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:166
+#, c-format
+msgid "usage:\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:167
+#, c-format
+msgid " server mode: aseqnet [-options]\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:168
+#, c-format
+msgid " client mode: aseqnet [-options] server_host\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:169
+#, c-format
+msgid "options:\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:170
+#, c-format
+msgid " -p,--port # : specify TCP port (digit or service name)\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:171
+#, c-format
+msgid " -s,--source addr : read from given addr (client:port)\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:172
+#, c-format
+msgid " -d,--dest addr : write to given addr (client:port)\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:173
+#, c-format
+msgid " -v, --verbose : print verbose messages\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:174
+#, c-format
+msgid " -i, --info : print certain received events\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:188
+#, c-format
+msgid "can't malloc\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:213
+#, c-format
+msgid "closing files..\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:272
+#, c-format
+msgid "sequencer opened: %d:%d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:279
+#, c-format
+msgid "invalid source address %s\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:309
+#, c-format
+msgid "service '%s' is not found in /etc/services\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:377
+#, c-format
+msgid "too many connections!\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:388
+#, c-format
+msgid "accepted[%d]\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:411
+#, c-format
+msgid "can't get address %s\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:422
+#, c-format
+msgid "ok.. connected\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:518
+#, c-format
+msgid "Channel %2d: Control event : %5d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:522
+#, c-format
+msgid "Channel %2d: Pitchbender : %5d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:526
+#, c-format
+msgid "Channel %2d: Note On event : %5d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:530
+#, c-format
+msgid "Channel %2d: Note Off event: %5d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:585
+#, c-format
+msgid "disconnected\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:116
+msgid "Front Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:117
+msgid "Front Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:118
+msgid "Rear Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:119
+msgid "Rear Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:121
+msgid "LFE"
+msgstr ""
+
+#: speaker-test/speaker-test.c:122
+msgid "Side Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:123
+msgid "Side Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:124
+msgid "Channel 9"
+msgstr ""
+
+#: speaker-test/speaker-test.c:125
+msgid "Channel 10"
+msgstr ""
+
+#: speaker-test/speaker-test.c:126
+msgid "Channel 11"
+msgstr ""
+
+#: speaker-test/speaker-test.c:127
+msgid "Channel 12"
+msgstr ""
+
+#: speaker-test/speaker-test.c:128
+msgid "Channel 13"
+msgstr ""
+
+#: speaker-test/speaker-test.c:129
+msgid "Channel 14"
+msgstr ""
+
+#: speaker-test/speaker-test.c:130
+msgid "Channel 15"
+msgstr ""
+
+#: speaker-test/speaker-test.c:131
+msgid "Channel 16"
+msgstr ""
+
+#: speaker-test/speaker-test.c:454
+#, c-format
+msgid "Broken configuration for playback: no configurations available: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:461
+#, c-format
+msgid "Access type not available for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:468
+#, c-format
+msgid "Sample format not available for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:475
+#, c-format
+msgid "Channels count (%i) not available for playbacks: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:483
+#, c-format
+msgid "Rate %iHz not available for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:488
+#, c-format
+msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:492
+#, c-format
+msgid "Rate set to %iHz (requested %iHz)\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:498
+#, c-format
+msgid "Buffer size range from %lu to %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:499
+#, c-format
+msgid "Period size range from %lu to %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:501
+#, c-format
+msgid "Requested period time %u us\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:504
+#, c-format
+msgid "Unable to set period time %u us for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:510
+#, c-format
+msgid "Requested buffer time %u us\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:513
+#, c-format
+msgid "Unable to set buffer time %u us for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:522
+#, c-format
+msgid "Using max buffer size %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:525
+#, c-format
+msgid "Unable to set buffer size %lu for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:531
+#, c-format
+msgid "Periods = %u\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:534
+#, c-format
+msgid "Unable to set nperiods %u for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:543
+#, c-format
+msgid "Unable to set hw params for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:549
+#, c-format
+msgid "was set period_size = %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:550
+#, c-format
+msgid "was set buffer_size = %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:552
+#, c-format
+msgid "buffer to small, could not use\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:565
+#, c-format
+msgid "Unable to determine current swparams for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:572
+#, c-format
+msgid "Unable to set start threshold mode for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:579
+#, c-format
+msgid "Unable to set avail min for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:586
+#, c-format
+msgid "Unable to set sw params for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:606
+#, c-format
+msgid "Unable to set channel map: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:626
+#, c-format
+msgid "Can't recovery from underrun, prepare failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:637
+#, c-format
+msgid "Can't recovery from suspend, prepare failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#, c-format
+msgid "No enough memory\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:706
+#, c-format
+msgid "Cannot open WAV file %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#, c-format
+msgid "Invalid WAV file %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:715
+#, c-format
+msgid "Not a WAV file: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:719
+#, c-format
+msgid "Unsupported WAV format %d for %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:724
+#, c-format
+msgid "%s is not a mono stream (%d channels)\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:729
+#, c-format
+msgid "Sample rate doesn't match (%d) for %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:734
+#, c-format
+msgid "Unsupported sample format bits %d for %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:795
+#, c-format
+msgid "Undefined channel %d\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:846
+#, c-format
+msgid "Write error: %d,%s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:848
+#, c-format
+msgid "xrun_recovery failed: %d,%s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:934
+#, c-format
+msgid ""
+"Usage: speaker-test [OPTION]... \n"
+"-h,--help\thelp\n"
+"-D,--device\tplayback device\n"
+"-r,--rate\tstream rate in Hz\n"
+"-c,--channels\tcount of channels in stream\n"
+"-f,--frequency\tsine wave frequency in Hz\n"
+"-F,--format\tsample format\n"
+"-b,--buffer\tring buffer size in us\n"
+"-p,--period\tperiod size in us\n"
+"-P,--nperiods\tnumber of periods\n"
+"-t,--test\tpink=use pink noise, sine=use sine wave, wav=WAV file\n"
+"-l,--nloops\tspecify number of loops to test, 0 = infinite\n"
+"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
+"-w,--wavfile\tUse the given WAV file as a test sound\n"
+"-W,--wavdir\tSpecify the directory containing WAV files\n"
+"-m,--chmap\tSpecify the channel map to override\n"
+"\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1063
+#, c-format
+msgid "Invalid number of periods %d\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#, c-format
+msgid "Invalid test type %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1095
+#, c-format
+msgid "Invalid parameter for -s option.\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1114
+#, c-format
+msgid "Unknown option '%c'\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1128
+#, c-format
+msgid "Playback device is %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1129
+#, c-format
+msgid "Stream parameters are %iHz, %s, %i channels\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1132
+#, c-format
+msgid "Using 16 octaves of pink noise\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1135
+#, c-format
+msgid "Sine wave rate is %.4fHz\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1138
+#, c-format
+msgid "WAV file(s)\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1148
+#, c-format
+msgid "Playback open error: %d,%s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1154
+#, c-format
+msgid "Setting of hwparams failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1158
+#, c-format
+msgid "Setting of swparams failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#, c-format
+msgid "Transfer failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:1213
+#, c-format
+msgid "Time per period = %lf\n"
+msgstr ""
diff --git a/po/boldquot.sed b/po/boldquot.sed
new file mode 100644
index 0000000..4b937aa
--- /dev/null
+++ b/po/boldquot.sed
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff --git a/po/de.gmo b/po/de.gmo
new file mode 100644
index 0000000..a1a683c
--- /dev/null
+++ b/po/de.gmo
Binary files differ
diff --git a/po/de.po b/po/de.po
new file mode 100644
index 0000000..54ea68e
--- /dev/null
+++ b/po/de.po
@@ -0,0 +1,1618 @@
+# German translations for the alsa-utils package.
+# Copyright (C) 2009 The ALSA Team
+# This file is distributed under the same license as the alsa-utils package.
+# Clemens Ladisch <clemens@ladisch.de>, 2009.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: alsa-utils 1.0.23\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"PO-Revision-Date: 2010-11-09 21:12+0100\n"
+"Last-Translator: Clemens Ladisch <clemens@ladisch.de>\n"
+"Language-Team: German\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: alsamixer/card_select.c:126 alsamixer/device_name.c:126
+msgid "Sound Card"
+msgstr "Soundkarte"
+
+#: alsamixer/card_select.c:181
+msgid "(default)"
+msgstr "(Standard)"
+
+#: alsamixer/card_select.c:191
+msgid "cannot enumerate sound cards"
+msgstr "Fehler beim Aufzählen der Soundkarten"
+
+#: alsamixer/card_select.c:215
+msgid "enter device name..."
+msgstr "Gerätenamen eingeben..."
+
+#: alsamixer/cli.c:40
+msgid "Usage: alsamixer [options]"
+msgstr "Verwendung: alsamixer [Optionen]"
+
+#: alsamixer/cli.c:41
+msgid ""
+"Useful options:\n"
+" -h, --help this help\n"
+" -c, --card=NUMBER sound card number or id\n"
+" -D, --device=NAME mixer device name\n"
+" -V, --view=MODE starting view mode: playback/capture/all"
+msgstr ""
+"Optionen:\n"
+" -h, --help Hilfe\n"
+" -c, --card=NUMMER Soundkarten-Nummer oder -ID\n"
+" -D, --device=NAME Mixer-Gerätename\n"
+" -V, --view=MODUS Ansicht beim Starten: playback=Wiedergabe, "
+"capture=Aufnahme, all=alle"
+
+#: alsamixer/cli.c:46
+msgid ""
+"Debugging options:\n"
+" -g, --no-color toggle using of colors\n"
+" -a, --abstraction=NAME mixer abstraction level: none/basic"
+msgstr ""
+"Debugging-Optionen:\n"
+" -g, --no-color keine Farben\n"
+" -a, --abstraction=NAME Mixer-Abstraktion: none/basic"
+
+#: alsamixer/cli.c:77
+#, c-format
+msgid "invalid card index: %s\n"
+msgstr "ungültige Karten-Nummer: %s\n"
+
+#: alsamixer/cli.c:103
+#, c-format
+msgid "unknown abstraction level: %s\n"
+msgstr "unbekannte Abstraktion: %s\n"
+
+#: alsamixer/cli.c:108
+#, c-format
+msgid "unknown option: %c\n"
+msgstr "unbekannte Option: %c\n"
+
+#: alsamixer/cli.c:110
+msgid "try `alsamixer --help' for more information\n"
+msgstr "siehe `alsamixer --help' für mehr Informationen\n"
+
+#: alsamixer/device_name.c:177
+msgid "Device name:"
+msgstr "Gerätename:"
+
+#: alsamixer/die.c:37
+#, c-format
+msgid "%s: %s\n"
+msgstr "%s: %s\n"
+
+#: alsamixer/mixer_display.c:98
+msgid "Card:"
+msgstr "Gerät:"
+
+#: alsamixer/mixer_display.c:99
+msgid "Chip:"
+msgstr "Chip:"
+
+#: alsamixer/mixer_display.c:100
+msgid "View:"
+msgstr "Ansicht:"
+
+#: alsamixer/mixer_display.c:101
+msgid "Item:"
+msgstr "Element:"
+
+#: alsamixer/mixer_display.c:104
+msgid "F1: Help"
+msgstr "F1: Hilfe"
+
+#: alsamixer/mixer_display.c:105
+msgid "F2: System information"
+msgstr "F2: System-Informationen"
+
+#: alsamixer/mixer_display.c:106
+msgid "F6: Select sound card"
+msgstr "F6: Soundkarte auswählen"
+
+#: alsamixer/mixer_display.c:107
+msgid "Esc: Exit"
+msgstr "Esc: Beenden"
+
+#: alsamixer/mixer_display.c:174
+msgid "(unplugged)"
+msgstr "(entfernt)"
+
+#: alsamixer/mixer_display.c:192
+msgid "Playback"
+msgstr "Wiedergabe"
+
+#: alsamixer/mixer_display.c:193
+msgid "Capture"
+msgstr "Aufnahme"
+
+#: alsamixer/mixer_display.c:194
+msgid "All"
+msgstr "Alle"
+
+#: alsamixer/mixer_display.c:234
+msgid "mute"
+msgstr "stumm"
+
+#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+msgid "dB gain:"
+msgstr "dB-Änderung:"
+
+#: alsamixer/mixer_display.c:285
+#, c-format
+msgid " [%s %s, %s]"
+msgstr " [%s %s; %s]"
+
+#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
+#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+msgid "Off"
+msgstr "Aus"
+
+#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+msgid "On"
+msgstr "An"
+
+#: alsamixer/mixer_display.c:363
+msgid "The sound device was unplugged."
+msgstr "Das Gerät wurde entfernt."
+
+#: alsamixer/mixer_display.c:364
+msgid "Press F6 to select another sound card."
+msgstr "Drücken Sie F6, um eine andere Soundkarte auszuwählen."
+
+#: alsamixer/mixer_display.c:379
+msgid "This sound device does not have any playback controls."
+msgstr "Dieses Gerät hat keine Wiedergabe-Regler."
+
+#: alsamixer/mixer_display.c:381
+msgid "This sound device does not have any capture controls."
+msgstr "Dieses Gerät hat keine Aufnahme-Regler."
+
+#: alsamixer/mixer_display.c:383
+msgid "This sound device does not have any controls."
+msgstr "Dieses Gerät hat keine Regler."
+
+#. TRANSLATORS: playback on; one character
+#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+msgid "O"
+msgstr "O"
+
+#. TRANSLATORS: playback muted; one character
+#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+msgid "M"
+msgstr "M"
+
+#. TRANSLATORS: "left"; no more than two characters
+#: alsamixer/mixer_display.c:536
+msgid "L"
+msgstr "L"
+
+#. TRANSLATORS: "right"; no more than two characters
+#: alsamixer/mixer_display.c:540
+msgid "R"
+msgstr "R"
+
+#. TRANSLATORS: no more than eight characters
+#: alsamixer/mixer_display.c:542
+msgid "CAPTURE"
+msgstr "AUFNAHME"
+
+#: alsamixer/mixer_display.c:592
+msgid "Front"
+msgstr "Vorne"
+
+#: alsamixer/mixer_display.c:595
+msgid "Rear"
+msgstr "Hinten"
+
+#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+msgid "Center"
+msgstr "Mitte"
+
+#: alsamixer/mixer_display.c:601
+msgid "Woofer"
+msgstr "Bass"
+
+#: alsamixer/mixer_display.c:604
+msgid "Side"
+msgstr "Seiten"
+
+#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+msgid "cannot open mixer"
+msgstr "Fehler beim Öffen des Mixer-Gerätes"
+
+#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+msgid "cannot load mixer controls"
+msgstr "Fehler beim Laden der Mixer-Regler"
+
+#: alsamixer/mixer_widget.c:169
+#, c-format
+msgid "Cannot open mixer device '%s'."
+msgstr "Fehler beim Öffnen des Mixer-Gerätes '%s'."
+
+#: alsamixer/mixer_widget.c:190
+msgid "Esc Exit"
+msgstr "Esc Beenden"
+
+#: alsamixer/mixer_widget.c:191
+msgid "F1 ? H Help"
+msgstr "F1 ? H Hilfe"
+
+#: alsamixer/mixer_widget.c:192
+msgid "F2 / System information"
+msgstr "F2 / System-Informationen"
+
+#: alsamixer/mixer_widget.c:193
+msgid "F3 Show playback controls"
+msgstr "F3 Ansicht Wiedergabe-Regler"
+
+#: alsamixer/mixer_widget.c:194
+msgid "F4 Show capture controls"
+msgstr "F4 Ansicht Aufnahme-Regler"
+
+#: alsamixer/mixer_widget.c:195
+msgid "F5 Show all controls"
+msgstr "F5 Ansicht alle Regler"
+
+#: alsamixer/mixer_widget.c:196
+msgid "Tab Toggle view mode (F3/F4/F5)"
+msgstr "Tab Ansichts-Modus umschalten (F3/F4/F5)"
+
+#: alsamixer/mixer_widget.c:197
+msgid "F6 S Select sound card"
+msgstr "F6 S Soundkarte auswählen"
+
+#: alsamixer/mixer_widget.c:198
+msgid "L Redraw screen"
+msgstr "L Bildschirm neu darstellen"
+
+#: alsamixer/mixer_widget.c:200
+msgid "Left Move to the previous control"
+msgstr "Links gehe zum vorherigen Regler"
+
+#: alsamixer/mixer_widget.c:201
+msgid "Right Move to the next control"
+msgstr "Rechts gehe zum nächsten Regler"
+
+#: alsamixer/mixer_widget.c:203
+msgid "Up/Down Change volume"
+msgstr "Oben/Unten Lautstärke ändern"
+
+#: alsamixer/mixer_widget.c:204
+msgid "+ - Change volume"
+msgstr "+ - Lautstärke ändern"
+
+#: alsamixer/mixer_widget.c:205
+msgid "Page Up/Dn Change volume in big steps"
+msgstr "Bild ^/v Lautstärke in großen Schritten ändern"
+
+#: alsamixer/mixer_widget.c:206
+msgid "End Set volume to 0%"
+msgstr "Ende Lautstärke auf 0% setzen"
+
+#: alsamixer/mixer_widget.c:207
+msgid "0-9 Set volume to 0%-90%"
+msgstr "0-9 Lautstärke auf 0%-90% setzen"
+
+#: alsamixer/mixer_widget.c:208
+msgid "Q W E Increase left/both/right volumes"
+msgstr "Q W E linke/beide/rechte Lautstärke erhöhen"
+
+#. TRANSLATORS: or Y instead of Z
+#: alsamixer/mixer_widget.c:210
+msgid "Z X C Decrease left/both/right volumes"
+msgstr "Y X C linke/beide/rechte Lautstärke verringern"
+
+#: alsamixer/mixer_widget.c:211
+msgid "B Balance left and right volumes"
+msgstr "B linke und rechte Lautstärke angleichen"
+
+#: alsamixer/mixer_widget.c:213
+msgid "M Toggle mute"
+msgstr "M stumm umschalten"
+
+#. TRANSLATORS: or , .
+#: alsamixer/mixer_widget.c:215
+msgid "< > Toggle left/right mute"
+msgstr ", . stumm links/rechts umschalten"
+
+#: alsamixer/mixer_widget.c:217
+msgid "Space Toggle capture"
+msgstr "Leertaste Aufnahme umschalten"
+
+#. TRANSLATORS: or Insert Delete
+#: alsamixer/mixer_widget.c:219
+msgid "; ' Toggle left/right capture"
+msgstr "Einfg Entf Aufnahme links/rechts umschalten"
+
+#: alsamixer/mixer_widget.c:221
+msgid "Authors:"
+msgstr "Autoren:"
+
+#: alsamixer/mixer_widget.c:222
+msgid " Tim Janik"
+msgstr " Tim Janik"
+
+#: alsamixer/mixer_widget.c:223
+msgid " Jaroslav Kysela <perex@perex.cz>"
+msgstr " Jaroslav Kysela <perex@perex.cz>"
+
+#: alsamixer/mixer_widget.c:224
+msgid " Clemens Ladisch <clemens@ladisch.de>"
+msgstr " Clemens Ladisch <clemens@ladisch.de>"
+
+#: alsamixer/mixer_widget.c:226
+msgid "Help"
+msgstr "Hilfe"
+
+#: alsamixer/proc_files.c:103
+msgid "Select File"
+msgstr "Datei wählen"
+
+#: alsamixer/textbox.c:52 alsamixer/textbox.c:66
+msgid "Error"
+msgstr "Fehler"
+
+#: alsamixer/textbox.c:80
+#, c-format
+msgid "Cannot open file \"%s\"."
+msgstr "Fehler beim Öffnen der Datei \"%s\"."
+
+#: aplay/aplay.c:175
+msgid "raw data"
+msgstr "Rohdaten"
+
+#: aplay/aplay.c:176
+msgid "VOC"
+msgstr "VOC"
+
+#: aplay/aplay.c:178
+msgid "WAVE"
+msgstr "WAVE"
+
+#: aplay/aplay.c:179
+msgid "Sparc Audio"
+msgstr "Sparc-Audio"
+
+#: aplay/aplay.c:200
+#, fuzzy, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"\n"
+"-h, --help help\n"
+" --version print current version\n"
+"-l, --list-devices list all soundcards and digital audio devices\n"
+"-L, --list-pcms list device names\n"
+"-D, --device=NAME select PCM by name\n"
+"-q, --quiet quiet mode\n"
+"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
+"-c, --channels=# channels\n"
+"-f, --format=FORMAT sample format (case insensitive)\n"
+"-r, --rate=# sample rate\n"
+"-d, --duration=# interrupt after # seconds\n"
+"-M, --mmap mmap stream\n"
+"-N, --nonblock nonblocking mode\n"
+"-F, --period-time=# distance between interrupts is # microseconds\n"
+"-B, --buffer-time=# buffer duration is # microseconds\n"
+" --period-size=# distance between interrupts is # frames\n"
+" --buffer-size=# buffer duration is # frames\n"
+"-A, --avail-min=# min available space for wakeup is # microseconds\n"
+"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
+" (relative to buffer size if <= 0)\n"
+"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from "
+"xrun\n"
+"-v, --verbose show PCM structure and setup (accumulative)\n"
+"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
+"-I, --separate-channels one file for each channel\n"
+"-i, --interactive allow interactive operation from stdin\n"
+"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
+" --disable-resample disable automatic rate resample\n"
+" --disable-channels disable automatic channel conversions\n"
+" --disable-format disable automatic format conversions\n"
+" --disable-softvol disable software volume control (softvol)\n"
+" --test-position test ring buffer position\n"
+" --test-coef=# test coefficient for ring buffer position (default "
+"8)\n"
+" expression for validation is: coef * (buffer_size / "
+"2)\n"
+" --test-nowait do not wait for ring buffer - eats whole CPU\n"
+" --max-file-time=# start another output file when the old file has "
+"recorded\n"
+" for this many seconds\n"
+" --process-id-file write the process ID here\n"
+" --use-strftime apply the strftime facility to the output file name\n"
+" --dump-hw-params dump hw_params of the device\n"
+" --fatal-errors treat all errors as fatal\n"
+msgstr ""
+"Verwendung: %s [Option]... [Datei]...\n"
+"\n"
+"-h, --help Hilfe\n"
+" --version Version anzeigen\n"
+"-l, --list-devices alle Soundkarten und -Geräte auflisten\n"
+"-L, --list-pcms ALSA-Gerätenamen auflisten\n"
+"-D, --device=NAME PCM-Gerät wählen\n"
+"-q, --quiet weniger Programmausgaben\n"
+"-t, --file-type TYP Dateityp (voc, wav, raw oder au)\n"
+"-c, --channels=# Kanäle\n"
+"-f, --format=FORMAT Sample-Format\n"
+"-r, --rate=# Sample-Rate\n"
+"-d, --duration=# Beenden nach # Sekunden\n"
+"-M, --mmap mmap-Modus\n"
+"-N, --nonblock nonblocking-Modus\n"
+"-F, --period-time=# Abstand zwischen Interrupts ist # µs\n"
+"-B, --buffer-time=# Puffer-Länge ist # µs\n"
+" --period-size=# Abstand zwischen Interrupts ist # Frames\n"
+" --buffer-size=# Puffer-Länge ist # Frames\n"
+"-A, --avail-min=# freier Pufferspeicher für Wakeup ist # µs\n"
+"-R, --start-delay=# Puffer-Füllgrad zum automatischen PCM-Start, in µs\n"
+" (wenn <= 0, freier Puffer-Speicher)\n"
+"-T, --stop-delay=# Zeit vor xrun zum automatischen PCM-Stop, in µs\n"
+"-v, --verbose zeige PCM-Struktur und -Konfiguration (akkumulativ)\n"
+"-V, --vumeter=TYP VU-Anzeige (TYP: mono oder stereo)\n"
+"-I, --separate-channels eine Datei pro Kanal\n"
+" --disable-resample keine automatische Sample-Rate-Anpassung\n"
+" --disable-channels keine automatische Kanal-Anzahl-Anpassung\n"
+" --disable-format keine automatische Format-Anpassung\n"
+" --disable-softvol kein Software-Lautstärke-Regler (softvol)\n"
+" --test-position überprüfe Position im Ring-Puffer\n"
+" --test-coef=# Test-Koeffizient für Positionsprüfung (Standard 8)\n"
+" Formel für Prüfung ist: Koeffizient * (Puffergröße / "
+"2)\n"
+" --test-nowait kein Warten auf Ringpuffer; beansprucht volle CPU-"
+"Leistung\n"
+" --max-file-time=# erzeuge mehrere Dateien; Wechsel nach # Sekunden\n"
+" --process-id-file=# schreibe Prozess-ID in diese Datei\n"
+" --use-strftime formatiere Dateiname mit strftime; %%v=Dateinummer\n"
+
+#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#, c-format
+msgid "Recognized sample formats are:"
+msgstr "Unterstützte Sample-Formate:"
+
+#: aplay/aplay.c:250
+#, c-format
+msgid ""
+"\n"
+"Some of these may not be available on selected hardware\n"
+msgstr ""
+"\n"
+"Nicht alle davon sind auf jeder Hardware verfügbar.\n"
+
+#: aplay/aplay.c:251
+#, fuzzy, c-format
+msgid "The available format shortcuts are:\n"
+msgstr "Unterstütze Format-Abkürzungen:\n"
+
+#: aplay/aplay.c:252
+#, c-format
+msgid "-f cd (16 bit little endian, 44100, stereo)\n"
+msgstr "-f cd (16 Bits, Little Endian, 44100 Hz, stereo)\n"
+
+#: aplay/aplay.c:253
+#, c-format
+msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
+msgstr "-f cdr (16 Bits, Big Endian, 44100 Hz, stereo)\n"
+
+#: aplay/aplay.c:254
+#, c-format
+msgid "-f dat (16 bit little endian, 48000, stereo)\n"
+msgstr "-f dat (16 Bits, Little Endian, 48000 Hz, stereo)\n"
+
+#: aplay/aplay.c:268
+msgid "no soundcards found..."
+msgstr "keine Soundkarten gefunden ..."
+
+#: aplay/aplay.c:271
+#, c-format
+msgid "**** List of %s Hardware Devices ****\n"
+msgstr "**** Liste der Hardware-Geräte (%s) ****\n"
+
+#: aplay/aplay.c:300
+#, c-format
+msgid "card %i: %s [%s], device %i: %s [%s]\n"
+msgstr "Karte %i: %s [%s], Gerät %i: %s [%s]\n"
+
+#: aplay/aplay.c:306
+#, c-format
+msgid " Subdevices: %i/%i\n"
+msgstr " Sub-Geräte: %i/%i\n"
+
+#: aplay/aplay.c:313
+#, c-format
+msgid " Subdevice #%i: %s\n"
+msgstr " Sub-Gerät #%i: %s\n"
+
+#: aplay/aplay.c:394
+#, c-format
+msgid "Aborted by signal %s...\n"
+msgstr "Abbruch durch Signal %s ...\n"
+
+#: aplay/aplay.c:512
+msgid "command should be named either arecord or aplay"
+msgstr "Befehl sollte arecord oder aplay sein"
+
+#: aplay/aplay.c:556
+#, c-format
+msgid "unrecognized file format %s"
+msgstr "unbekanntes Dateiformat %s"
+
+#: aplay/aplay.c:563
+#, c-format
+msgid "value %i for channels is invalid"
+msgstr "Kanalanzahl %i ist ungültig"
+
+#: aplay/aplay.c:582
+#, c-format
+msgid "wrong extended format '%s'"
+msgstr "erweitertes Format '%s' ist ungültig"
+
+#: aplay/aplay.c:593
+#, c-format
+msgid "bad speed value %i"
+msgstr "ungültige Rate %i"
+
+#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
+#, fuzzy, c-format
+msgid "Unable to parse channel map string: %s\n"
+msgstr "Fehler beim Setzen des Mindest-verfügbar-Wertes: %s\n"
+
+#: aplay/aplay.c:706
+#, c-format
+msgid "Try `%s --help' for more information.\n"
+msgstr "Siehe `%s --help' für mehr Informationen.\n"
+
+#: aplay/aplay.c:722
+#, c-format
+msgid "audio open error: %s"
+msgstr "Fehler beim Öffnen des Gerätes: %s"
+
+#: aplay/aplay.c:727
+#, c-format
+msgid "info error: %s"
+msgstr "Fehler beim Lesen der Geräteinformationen: %s"
+
+#: aplay/aplay.c:734
+#, c-format
+msgid "nonblock setting error: %s"
+msgstr "Fehler beim Setzen des nonblock-Modus: %s"
+
+#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
+#: aplay/aplay.c:1867 aplay/aplay.c:1897
+msgid "not enough memory"
+msgstr "nicht genug Speicher"
+
+#: aplay/aplay.c:768
+#, c-format
+msgid "Cannot create process ID file %s: %s"
+msgstr "Fehler beim Schreiben der Prozess-ID-Datei %s: %s"
+
+#: aplay/aplay.c:858
+#, c-format
+msgid "read error (called from line %i)"
+msgstr "Lesefehler (aufgerufen von Zeile %i)"
+
+#: aplay/aplay.c:925
+#, c-format
+msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+"unbekannte Länge des 'fmt '-Blocks (gelesen: %u, sollte mindestens %u sein)"
+
+#: aplay/aplay.c:936
+#, c-format
+msgid ""
+"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+"unbekannte Länge des erweiterten 'fmt '-Blocks (gelesen: %u, sollte "
+"mindestens %u sein)"
+
+#: aplay/aplay.c:941
+msgid "wrong format tag in extensible 'fmt ' chunk"
+msgstr "ungültiger Format-Wert im erweiterten 'fmt '-Block"
+
+#: aplay/aplay.c:948
+#, c-format
+msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
+msgstr ""
+"kann WAVE-Datei-Format 0x%04x nicht abspielen; ist weder PCM noch FLOAT"
+
+#: aplay/aplay.c:953
+#, c-format
+msgid "can't play WAVE-files with %d tracks"
+msgstr "kann WAVE-Datei mit %d Kanälen nicht abspielen"
+
+#: aplay/aplay.c:961 aplay/aplay.c:1087
+#, c-format
+msgid "Warning: format is changed to U8\n"
+msgstr "Warnung: benutztes Format ist U8\n"
+
+#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
+#, fuzzy, c-format
+msgid "Warning: format is changed to %s\n"
+msgstr "Warnung: benutztes Format ist U8\n"
+
+#: aplay/aplay.c:1000
+#, c-format
+msgid ""
+" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
+msgstr ""
+"kann WAVE-Datei mit %d-Bit-Samples in %d Bytes (%d Kanäle) nicht abspielen"
+
+#: aplay/aplay.c:1023
+#, c-format
+msgid " can't play WAVE-files with sample %d bits wide"
+msgstr "kann WAVE-Datei mit %d-Bit-Samples nicht abspielen"
+
+#: aplay/aplay.c:1081
+#, c-format
+msgid "Warning: format is changed to MU_LAW\n"
+msgstr "Warnung: benutztes Format ist MU_LAW\n"
+
+#: aplay/aplay.c:1093
+#, c-format
+msgid "Warning: format is changed to S16_BE\n"
+msgstr "Warnung: benutztes Format ist S16_BE\n"
+
+#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
+#: aplay/aplay.c:2727
+msgid "read error"
+msgstr "Lesefehler"
+
+#: aplay/aplay.c:1136
+msgid "Channel numbers don't match between hw_params and channel map"
+msgstr ""
+
+#: aplay/aplay.c:1145
+#, c-format
+msgid "Warning: unable to get channel map\n"
+msgstr ""
+
+#: aplay/aplay.c:1178
+#, c-format
+msgid "Channel %d doesn't match with hw_parmas"
+msgstr ""
+
+#: aplay/aplay.c:1204
+msgid "Broken configuration for this PCM: no configurations available"
+msgstr ""
+"ungültige Konfiguration für dieses Gerät: keine unterstützte Konfiguration"
+
+#: aplay/aplay.c:1208
+#, c-format
+msgid "HW Params of device \"%s\":\n"
+msgstr ""
+
+#: aplay/aplay.c:1228
+msgid "Access type not available"
+msgstr "Zugriffs-Modus nicht unterstützt"
+
+#: aplay/aplay.c:1233
+msgid "Sample format non available"
+msgstr "Sample-Format nicht unterstützt"
+
+#: aplay/aplay.c:1239
+msgid "Channels count non available"
+msgstr "Kanalanzahl nicht unterstützt"
+
+#: aplay/aplay.c:1254
+#, c-format
+msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
+msgstr ""
+"Warnung: Rate ist nicht exakt (angefordert: %i Hz, unterstützt: %i Hz)\n"
+
+#: aplay/aplay.c:1260
+#, c-format
+msgid " please, try the plug plugin %s\n"
+msgstr " probieren Sie bitte das plug-Plugin: %s\n"
+
+#: aplay/aplay.c:1297
+msgid "Unable to install hw params:"
+msgstr "Fehler beim Setzen der Hardware-Parameter:"
+
+#: aplay/aplay.c:1304
+#, c-format
+msgid "Can't use period equal to buffer size (%lu == %lu)"
+msgstr "Periode gleich der Puffer-Größe wird nicht unterstützt (%lu == %lu)"
+
+#: aplay/aplay.c:1335
+msgid "unable to install sw params:"
+msgstr "Fehler beim Setzen der Software-Parameter:"
+
+#: aplay/aplay.c:1369
+#, c-format
+msgid "snd_pcm_mmap_begin problem: %s"
+msgstr "Fehler bei snd_pcm_mmap_begin: %s"
+
+#: aplay/aplay.c:1398
+#, c-format
+msgid "stdin O_NONBLOCK flag setup failed\n"
+msgstr "Fehler beim Setzen von O_NONBLOCK in stdin\n"
+
+#: aplay/aplay.c:1422
+#, c-format
+msgid "\rPAUSE command ignored (no hw support)\n"
+msgstr "\rPause-Kommando ignoriert (keine HW-Unterstützung)\n"
+
+#: aplay/aplay.c:1427
+#, c-format
+msgid "pause push error: %s"
+msgstr "Fehler beim Pausieren: %s"
+
+#: aplay/aplay.c:1436
+#, c-format
+msgid "pause release error: %s"
+msgstr "Fehler beim Beenden der Pause: %s"
+
+#: aplay/aplay.c:1452
+#, c-format
+msgid ""
+"\r=== PAUSE === "
+msgstr ""
+"\r=== PAUSE === "
+
+#: aplay/aplay.c:1494
+#, c-format
+msgid "status error: %s"
+msgstr "Status-Fehler: %s"
+
+#: aplay/aplay.c:1499
+#, fuzzy, c-format
+msgid "fatal %s: %s"
+msgstr "%s: %s\n"
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
+msgid "underrun"
+msgstr "Unterlauf"
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
+msgid "overrun"
+msgstr "Überlauf"
+
+#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#, c-format
+msgid "%s!!! (at least %.3f ms long)\n"
+msgstr "%s!!! (mindestens %.3f ms)\n"
+
+#: aplay/aplay.c:1526
+#, c-format
+msgid "Status:\n"
+msgstr "Status:\n"
+
+#: aplay/aplay.c:1530
+#, c-format
+msgid "xrun: prepare error: %s"
+msgstr "Unter-/Überlauf: Fehler beim Re-Initialisieren des Gerätes: %s"
+
+#: aplay/aplay.c:1536
+#, c-format
+msgid "Status(DRAINING):\n"
+msgstr "Status (DRAINING):\n"
+
+#: aplay/aplay.c:1540
+#, c-format
+msgid "capture stream format change? attempting recover...\n"
+msgstr "Format-Wechsel der Aufnahme-Daten? Versuche Wiederherstellung ...\n"
+
+#: aplay/aplay.c:1542
+#, c-format
+msgid "xrun(DRAINING): prepare error: %s"
+msgstr "XRUN (DRAINING): Fehler beim Re-Initialisieren des Gerätes: %s"
+
+#: aplay/aplay.c:1549
+#, c-format
+msgid "Status(R/W):\n"
+msgstr "Status (R/W):\n"
+
+#: aplay/aplay.c:1552
+#, c-format
+msgid "read/write error, state = %s"
+msgstr "Lese-/Schreibfehler, Status = %s"
+
+#: aplay/aplay.c:1562
+#, c-format
+msgid "Suspended. Trying resume. "
+msgstr "Ruhezustand. Versuche, aufzuwecken. "
+
+#: aplay/aplay.c:1567
+#, c-format
+msgid "Failed. Restarting stream. "
+msgstr "Fehlgeschlagen. Re-Initialisierung. "
+
+#: aplay/aplay.c:1569
+#, c-format
+msgid "suspend: prepare error: %s"
+msgstr "Ruhezustand: Fehler beim Re-Initialisieren: %s"
+
+#: aplay/aplay.c:1574
+#, c-format
+msgid "Done.\n"
+msgstr "Fertig.\n"
+
+#: aplay/aplay.c:1596
+#, c-format
+msgid " !clip "
+msgstr " !clip "
+
+#: aplay/aplay.c:1743
+#, c-format
+msgid "Unsupported bit size %d.\n"
+msgstr "%d-Bit-Samples werden nicht unterstützt.\n"
+
+#: aplay/aplay.c:1777
+#, c-format
+msgid "Max peak (%li samples): 0x%08x "
+msgstr "Höchstwert (%li Samples): 0x%08x "
+
+#: aplay/aplay.c:1811
+#, c-format
+msgid ""
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
+"%li\n"
+msgstr ""
+"verdächtige Puffer-Position (total %li): avail = %li, delay = %li, buffer = "
+"%li\n"
+
+#: aplay/aplay.c:1939
+#, c-format
+msgid "write error: %s"
+msgstr "Schreibfehler: %s"
+
+#: aplay/aplay.c:1987
+#, c-format
+msgid "writev error: %s"
+msgstr "Vektor-Schreib-Fehler: %s"
+
+#: aplay/aplay.c:2031
+#, c-format
+msgid "read error: %s"
+msgstr "Lesefehler: %s"
+
+#: aplay/aplay.c:2075
+#, c-format
+msgid "readv error: %s"
+msgstr "Vektor-Lese-Fehler: %s"
+
+#: aplay/aplay.c:2123
+msgid "can't allocate buffer for silence"
+msgstr "nicht genug Speicher für Stille-Block"
+
+#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
+#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
+#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+msgid "write error"
+msgstr "Schreibfehler"
+
+#: aplay/aplay.c:2145
+#, c-format
+msgid "voc_pcm_flush - silence error"
+msgstr "voc_pcm_flush - Fehler in set_silence"
+
+#: aplay/aplay.c:2148
+msgid "voc_pcm_flush error"
+msgstr "Schreibfehler"
+
+#: aplay/aplay.c:2173
+msgid "malloc error"
+msgstr "nicht genug Speicher"
+
+#: aplay/aplay.c:2177
+#, c-format
+msgid "Playing Creative Labs Channel file '%s'...\n"
+msgstr "Spiele Creative Labs Channel-Datei '%s'...\n"
+
+#: aplay/aplay.c:2245 aplay/aplay.c:2340
+msgid "can't play packed .voc files"
+msgstr "kann komprimierte .voc-Dateien nicht abspielen"
+
+#: aplay/aplay.c:2300
+#, c-format
+msgid "can't play loops; %s isn't seekable\n"
+msgstr ""
+"kann Schleife nicht abspielen; Dateiposition in %s ist nicht änderbar\n"
+
+#: aplay/aplay.c:2349
+#, c-format
+msgid "unknown blocktype %d. terminate."
+msgstr "Unbekannter Block-Typ %d. Abbruch."
+
+#: aplay/aplay.c:2480
+#, c-format
+msgid "Wave doesn't support %s format..."
+msgstr "Format %s wird in WAVE nicht unterstützt ..."
+
+#: aplay/aplay.c:2540
+#, c-format
+msgid "Sparc Audio doesn't support %s format..."
+msgstr "Format %s wird in Sparc-Audio nicht unterstützt ..."
+
+#: aplay/aplay.c:2621
+msgid "Playing"
+msgstr "Wiedergabe:"
+
+#: aplay/aplay.c:2621
+msgid "Recording"
+msgstr "Aufnahme:"
+
+#: aplay/aplay.c:2625
+#, c-format
+msgid "Rate %d Hz, "
+msgstr "Rate: %d Hz, "
+
+#: aplay/aplay.c:2627
+#, c-format
+msgid "Mono"
+msgstr "mono"
+
+#: aplay/aplay.c:2629
+#, c-format
+msgid "Stereo"
+msgstr "stereo"
+
+#: aplay/aplay.c:2631
+#, c-format
+msgid "Channels %i"
+msgstr "%i Kanäle"
+
+#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#, c-format
+msgid "You need to specify %d files"
+msgstr "Es werden %d Dateien benötigt."
+
+#: seq/aconnect/aconnect.c:49
+#, c-format
+msgid "aconnect - ALSA sequencer connection manager\n"
+msgstr "aconnect - ALSA Sequenzer Verbindungs-Manager\n"
+
+#: seq/aconnect/aconnect.c:50
+#, c-format
+msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
+msgstr "Copyright © 1999-2000 Takashi Iwai\n"
+
+#: seq/aconnect/aconnect.c:51
+#, c-format
+msgid "Usage:\n"
+msgstr "Verwendung:\n"
+
+#: seq/aconnect/aconnect.c:52
+#, c-format
+msgid " * Connection/disconnection between two ports\n"
+msgstr " * Verbindung zwischen zwei Ports herstellen/trennen\n"
+
+#: seq/aconnect/aconnect.c:53
+#, c-format
+msgid " aconnect [-options] sender receiver\n"
+msgstr " aconnect [Optionen] Sender Empfänger\n"
+
+#: seq/aconnect/aconnect.c:54
+#, c-format
+msgid " sender, receiver = client:port pair\n"
+msgstr " Sender, Empfänger = Client:Port\n"
+
+#: seq/aconnect/aconnect.c:55
+#, c-format
+msgid " -d,--disconnect disconnect\n"
+msgstr " -d,--disconnect Verbindung trennen\n"
+
+#: seq/aconnect/aconnect.c:56
+#, c-format
+msgid " -e,--exclusive exclusive connection\n"
+msgstr " -e,--exclusive exklusive Verbindung\n"
+
+#: seq/aconnect/aconnect.c:57
+#, c-format
+msgid " -r,--real # convert real-time-stamp on queue\n"
+msgstr " -r,--real # benutze Zeitstempel der Queue #\n"
+
+#: seq/aconnect/aconnect.c:58
+#, c-format
+msgid " -t,--tick # convert tick-time-stamp on queue\n"
+msgstr " -t,--tick # benutze Tick-Zeitstempel der Queue #\n"
+
+#: seq/aconnect/aconnect.c:59
+#, c-format
+msgid " * List connected ports (no subscription action)\n"
+msgstr " * Ports und Verbindungen auflisten\n"
+
+#: seq/aconnect/aconnect.c:60
+#, c-format
+msgid " aconnect -i|-o [-options]\n"
+msgstr " aconnect -i|-o [Optionen]\n"
+
+#: seq/aconnect/aconnect.c:61
+#, c-format
+msgid " -i,--input list input (readable) ports\n"
+msgstr " -i,--input Eingabe-Ports (lesbar) auflisten\n"
+
+#: seq/aconnect/aconnect.c:62
+#, c-format
+msgid " -o,--output list output (writable) ports\n"
+msgstr " -o,--output Ausgabe-Ports (schreibbar) auflisten\n"
+
+#: seq/aconnect/aconnect.c:63
+#, c-format
+msgid " -l,--list list current connections of each port\n"
+msgstr " -l,--list Verbindungen der Ports auflisten\n"
+
+#: seq/aconnect/aconnect.c:64
+#, c-format
+msgid " * Remove all exported connections\n"
+msgstr " * alle Verbindungen trennen\n"
+
+#: seq/aconnect/aconnect.c:65
+#, c-format
+msgid " -x, --removeall\n"
+msgstr " -x,--removeall\n"
+
+#: seq/aconnect/aconnect.c:132
+msgid "Connecting To"
+msgstr "verbunden zu"
+
+#: seq/aconnect/aconnect.c:133
+msgid "Connected From"
+msgstr "verbunden von"
+
+#: seq/aconnect/aconnect.c:169
+#, c-format
+msgid "client %d: '%s' [type=%s]\n"
+msgstr "Client %d: '%s' [Typ=%s]\n"
+
+#: seq/aconnect/aconnect.c:173
+msgid "user"
+msgstr "User"
+
+#: seq/aconnect/aconnect.c:173
+msgid "kernel"
+msgstr "Kernel"
+
+#: seq/aconnect/aconnect.c:307
+#, c-format
+msgid "can't open sequencer\n"
+msgstr "Fehler beim Öffnen des Sequenzers\n"
+
+#: seq/aconnect/aconnect.c:335
+#, c-format
+msgid "can't get client id\n"
+msgstr "Fehler beim Lesen der Client-ID\n"
+
+#: seq/aconnect/aconnect.c:342
+#, c-format
+msgid "can't set client info\n"
+msgstr "Fehler beim Setzen des Client-Namens\n"
+
+#: seq/aconnect/aconnect.c:349
+#, c-format
+msgid "invalid sender address %s\n"
+msgstr "ungültige Sender-Adresse %s\n"
+
+#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
+#, c-format
+msgid "invalid destination address %s\n"
+msgstr "ungültige Ziel-Adresse %s\n"
+
+#: seq/aconnect/aconnect.c:368
+#, c-format
+msgid "No subscription is found\n"
+msgstr "keine Verbindung gefunden\n"
+
+#: seq/aconnect/aconnect.c:373
+#, c-format
+msgid "Disconnection failed (%s)\n"
+msgstr "Verbindungs-Trennung fehlgeschlagen (%s)\n"
+
+#: seq/aconnect/aconnect.c:379
+#, c-format
+msgid "Connection is already subscribed\n"
+msgstr "Verbindung ist bereits vorhanden\n"
+
+#: seq/aconnect/aconnect.c:384
+#, c-format
+msgid "Connection failed (%s)\n"
+msgstr "Verbindung fehlgeschlagen (%s)\n"
+
+#: seq/aseqnet/aseqnet.c:164
+#, c-format
+msgid "aseqnet - network client/server on ALSA sequencer\n"
+msgstr "aseqnet - Netzwerk-Client/Server für ALSA Sequenzer\n"
+
+#: seq/aseqnet/aseqnet.c:165
+#, c-format
+msgid " Copyright (C) 1999 Takashi Iwai\n"
+msgstr " Copyright © 1999 Takashi Iwai\n"
+
+#: seq/aseqnet/aseqnet.c:166
+#, c-format
+msgid "usage:\n"
+msgstr "Verwendung:\n"
+
+#: seq/aseqnet/aseqnet.c:167
+#, c-format
+msgid " server mode: aseqnet [-options]\n"
+msgstr " Server-Modus: aseqnet [Optionen]\n"
+
+#: seq/aseqnet/aseqnet.c:168
+#, c-format
+msgid " client mode: aseqnet [-options] server_host\n"
+msgstr " Client-Modus: aseqnet [Optionen] ServerHost\n"
+
+#: seq/aseqnet/aseqnet.c:169
+#, c-format
+msgid "options:\n"
+msgstr "Optionen:\n"
+
+#: seq/aseqnet/aseqnet.c:170
+#, fuzzy, c-format
+msgid " -p,--port # : specify TCP port (digit or service name)\n"
+msgstr " -p,--port # : TCP-Port (Zahl oder Service-Name)\n"
+
+#: seq/aseqnet/aseqnet.c:171
+#, c-format
+msgid " -s,--source addr : read from given addr (client:port)\n"
+msgstr " -s,--source # : lese von Sequenzer-Port (Client:Port)\n"
+
+#: seq/aseqnet/aseqnet.c:172
+#, c-format
+msgid " -d,--dest addr : write to given addr (client:port)\n"
+msgstr " -d,--dest # : schreibe auf Sequenzer-Port (Client:Port)\n"
+
+#: seq/aseqnet/aseqnet.c:173
+#, c-format
+msgid " -v, --verbose : print verbose messages\n"
+msgstr " -v,--verbose : ausführliche Meldungen\n"
+
+#: seq/aseqnet/aseqnet.c:174
+#, c-format
+msgid " -i, --info : print certain received events\n"
+msgstr " -i,--info : Ausgabe bestimmter empfangener Ereignisse\n"
+
+#: seq/aseqnet/aseqnet.c:188
+#, c-format
+msgid "can't malloc\n"
+msgstr "nicht genug Speicher\n"
+
+#: seq/aseqnet/aseqnet.c:213
+#, c-format
+msgid "closing files..\n"
+msgstr "schließe Dateien ...\n"
+
+#: seq/aseqnet/aseqnet.c:272
+#, c-format
+msgid "sequencer opened: %d:%d\n"
+msgstr "Sequenzer geöffnet: %d:%d\n"
+
+#: seq/aseqnet/aseqnet.c:279
+#, c-format
+msgid "invalid source address %s\n"
+msgstr "ungültige Quell-Adresse %s\n"
+
+#: seq/aseqnet/aseqnet.c:309
+#, c-format
+msgid "service '%s' is not found in /etc/services\n"
+msgstr "Service '%s' in /etc/services nicht gefunden\n"
+
+#: seq/aseqnet/aseqnet.c:377
+#, c-format
+msgid "too many connections!\n"
+msgstr "zu viele Verbindungen\n"
+
+#: seq/aseqnet/aseqnet.c:388
+#, c-format
+msgid "accepted[%d]\n"
+msgstr "angenommen[%d]\n"
+
+#: seq/aseqnet/aseqnet.c:411
+#, c-format
+msgid "can't get address %s\n"
+msgstr "kann Adresse für %s nicht bestimmen\n"
+
+#: seq/aseqnet/aseqnet.c:422
+#, c-format
+msgid "ok.. connected\n"
+msgstr "OK ... verbunden\n"
+
+#: seq/aseqnet/aseqnet.c:518
+#, c-format
+msgid "Channel %2d: Control event : %5d\n"
+msgstr "Channel %2d: Control event : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:522
+#, c-format
+msgid "Channel %2d: Pitchbender : %5d\n"
+msgstr "Channel %2d: Pitchbender : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:526
+#, c-format
+msgid "Channel %2d: Note On event : %5d\n"
+msgstr "Channel %2d: Note On evenet : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:530
+#, c-format
+msgid "Channel %2d: Note Off event: %5d\n"
+msgstr "Channel %2d: Note Off event: %5d\n"
+
+#: seq/aseqnet/aseqnet.c:585
+#, c-format
+msgid "disconnected\n"
+msgstr "Verbindung getrennt\n"
+
+#: speaker-test/speaker-test.c:116
+msgid "Front Left"
+msgstr "Vorne links"
+
+#: speaker-test/speaker-test.c:117
+msgid "Front Right"
+msgstr "Vorne rechts"
+
+#: speaker-test/speaker-test.c:118
+msgid "Rear Left"
+msgstr "Hinten links"
+
+#: speaker-test/speaker-test.c:119
+msgid "Rear Right"
+msgstr "Hinten rechts"
+
+#: speaker-test/speaker-test.c:121
+msgid "LFE"
+msgstr "Bass"
+
+#: speaker-test/speaker-test.c:122
+msgid "Side Left"
+msgstr "Seitlich links"
+
+#: speaker-test/speaker-test.c:123
+msgid "Side Right"
+msgstr "Seitlich rechts"
+
+#: speaker-test/speaker-test.c:124
+msgid "Channel 9"
+msgstr "Kanal 9"
+
+#: speaker-test/speaker-test.c:125
+msgid "Channel 10"
+msgstr "Kanal 10"
+
+#: speaker-test/speaker-test.c:126
+msgid "Channel 11"
+msgstr "Kanal 11"
+
+#: speaker-test/speaker-test.c:127
+msgid "Channel 12"
+msgstr "Kanal 12"
+
+#: speaker-test/speaker-test.c:128
+msgid "Channel 13"
+msgstr "Kanal 13"
+
+#: speaker-test/speaker-test.c:129
+msgid "Channel 14"
+msgstr "Kanal 14"
+
+#: speaker-test/speaker-test.c:130
+msgid "Channel 15"
+msgstr "Kanal 15"
+
+#: speaker-test/speaker-test.c:131
+msgid "Channel 16"
+msgstr "Kanal 16"
+
+#: speaker-test/speaker-test.c:454
+#, c-format
+msgid "Broken configuration for playback: no configurations available: %s\n"
+msgstr "Ungültige Konfiguration: keine unterstützte Konfiguration: %s\n"
+
+#: speaker-test/speaker-test.c:461
+#, c-format
+msgid "Access type not available for playback: %s\n"
+msgstr "Zugriffsmodus nicht unterstützt: %s\n"
+
+#: speaker-test/speaker-test.c:468
+#, c-format
+msgid "Sample format not available for playback: %s\n"
+msgstr "Sample-Format nicht unterstützt: %s\n"
+
+#: speaker-test/speaker-test.c:475
+#, c-format
+msgid "Channels count (%i) not available for playbacks: %s\n"
+msgstr "Kanal-Anzahl %i nicht unterstützt: %s\n"
+
+#: speaker-test/speaker-test.c:483
+#, c-format
+msgid "Rate %iHz not available for playback: %s\n"
+msgstr "Rate %i Hz nicht unterstützt: %s\n"
+
+#: speaker-test/speaker-test.c:488
+#, c-format
+msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
+msgstr ""
+"Rate ist nicht exakt (angefordert: %i Hz, unterstützt: %i Hz, Fehlercode "
+"%d)\n"
+
+#: speaker-test/speaker-test.c:492
+#, c-format
+msgid "Rate set to %iHz (requested %iHz)\n"
+msgstr "Rate ist %i Hz (angefordert: %i Hz)\n"
+
+#: speaker-test/speaker-test.c:498
+#, c-format
+msgid "Buffer size range from %lu to %lu\n"
+msgstr "Puffergröße von %lu bis %lu\n"
+
+#: speaker-test/speaker-test.c:499
+#, c-format
+msgid "Period size range from %lu to %lu\n"
+msgstr "Periodengröße von %lu bis %lu\n"
+
+#: speaker-test/speaker-test.c:501
+#, c-format
+msgid "Requested period time %u us\n"
+msgstr "Angeforderte Periodenzeit %u µs\n"
+
+#: speaker-test/speaker-test.c:504
+#, c-format
+msgid "Unable to set period time %u us for playback: %s\n"
+msgstr "Fehler beim Setzen der Periodenzeit %u µs: %s\n"
+
+#: speaker-test/speaker-test.c:510
+#, c-format
+msgid "Requested buffer time %u us\n"
+msgstr "Angeforderte Pufferlänge %u µs\n"
+
+#: speaker-test/speaker-test.c:513
+#, c-format
+msgid "Unable to set buffer time %u us for playback: %s\n"
+msgstr "Fehler beim Setzen der Pufferlänge %u µs: %s\n"
+
+#: speaker-test/speaker-test.c:522
+#, c-format
+msgid "Using max buffer size %lu\n"
+msgstr "Verwende maximale Puffergröße %lu\n"
+
+#: speaker-test/speaker-test.c:525
+#, c-format
+msgid "Unable to set buffer size %lu for playback: %s\n"
+msgstr "Fehler beim Setzen der Puffergröße %lu: %s\n"
+
+#: speaker-test/speaker-test.c:531
+#, c-format
+msgid "Periods = %u\n"
+msgstr "Perioden = %u\n"
+
+#: speaker-test/speaker-test.c:534
+#, c-format
+msgid "Unable to set nperiods %u for playback: %s\n"
+msgstr "Fehler beim Setzen der Periodenanzahl %u: %s\n"
+
+#: speaker-test/speaker-test.c:543
+#, c-format
+msgid "Unable to set hw params for playback: %s\n"
+msgstr "Fehler beim Setzen der Hardware-Parameter: %s\n"
+
+#: speaker-test/speaker-test.c:549
+#, c-format
+msgid "was set period_size = %lu\n"
+msgstr "gesetzt: period_size = %lu\n"
+
+#: speaker-test/speaker-test.c:550
+#, c-format
+msgid "was set buffer_size = %lu\n"
+msgstr "gesetzt: buffer_size = %lu\n"
+
+#: speaker-test/speaker-test.c:552
+#, c-format
+msgid "buffer to small, could not use\n"
+msgstr "Puffer zu klein, kann nicht benutzt werden\n"
+
+#: speaker-test/speaker-test.c:565
+#, c-format
+msgid "Unable to determine current swparams for playback: %s\n"
+msgstr "Fehler beim Lesen der Software-Parameter: %s\n"
+
+#: speaker-test/speaker-test.c:572
+#, c-format
+msgid "Unable to set start threshold mode for playback: %s\n"
+msgstr "Fehler beim Setzen des Start-Schwellenwertes: %s\n"
+
+#: speaker-test/speaker-test.c:579
+#, c-format
+msgid "Unable to set avail min for playback: %s\n"
+msgstr "Fehler beim Setzen des Mindest-verfügbar-Wertes: %s\n"
+
+#: speaker-test/speaker-test.c:586
+#, c-format
+msgid "Unable to set sw params for playback: %s\n"
+msgstr "Fehler beim Setzen der Software-Parameter: %s\n"
+
+#: speaker-test/speaker-test.c:606
+#, fuzzy, c-format
+msgid "Unable to set channel map: %s\n"
+msgstr "Fehler beim Setzen des Mindest-verfügbar-Wertes: %s\n"
+
+#: speaker-test/speaker-test.c:626
+#, c-format
+msgid "Can't recovery from underrun, prepare failed: %s\n"
+msgstr ""
+"Fehler bei Unterlauf-Behandlung, Re-Initialisierung fehlgeschlagen: %s\n"
+
+#: speaker-test/speaker-test.c:637
+#, c-format
+msgid "Can't recovery from suspend, prepare failed: %s\n"
+msgstr ""
+"Fehler beim Aufwachen aus dem Ruhezustand, Re-Initialisierung "
+"fehlgeschlagen: %s\n"
+
+#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#, c-format
+msgid "No enough memory\n"
+msgstr "Nicht genug Speicher\n"
+
+#: speaker-test/speaker-test.c:706
+#, c-format
+msgid "Cannot open WAV file %s\n"
+msgstr "Kann WAV-Datei %s nicht öffnen\n"
+
+#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#, c-format
+msgid "Invalid WAV file %s\n"
+msgstr "Ungültige WAV-Datei %s\n"
+
+#: speaker-test/speaker-test.c:715
+#, c-format
+msgid "Not a WAV file: %s\n"
+msgstr "Keine WAV-Datei: %s\n"
+
+#: speaker-test/speaker-test.c:719
+#, c-format
+msgid "Unsupported WAV format %d for %s\n"
+msgstr "Nicht unterstütztes WAV-Format %d in %s\n"
+
+#: speaker-test/speaker-test.c:724
+#, c-format
+msgid "%s is not a mono stream (%d channels)\n"
+msgstr "%s ist keine Mono-Datei (%d Kanäle)\n"
+
+#: speaker-test/speaker-test.c:729
+#, c-format
+msgid "Sample rate doesn't match (%d) for %s\n"
+msgstr "Sample-Rate (%d) stimmt nicht überein in %s\n"
+
+#: speaker-test/speaker-test.c:734
+#, c-format
+msgid "Unsupported sample format bits %d for %s\n"
+msgstr "Nicht unterstütztes Sample-Format mit %d Bits in %s\n"
+
+#: speaker-test/speaker-test.c:795
+#, c-format
+msgid "Undefined channel %d\n"
+msgstr "Kanal %d nicht definiert\n"
+
+#: speaker-test/speaker-test.c:846
+#, c-format
+msgid "Write error: %d,%s\n"
+msgstr "Schreibfehler: %d, %s\n"
+
+#: speaker-test/speaker-test.c:848
+#, c-format
+msgid "xrun_recovery failed: %d,%s\n"
+msgstr "xrun_recovery fehlgeschlagen: %d, %s\n"
+
+#: speaker-test/speaker-test.c:934
+#, fuzzy, c-format
+msgid ""
+"Usage: speaker-test [OPTION]... \n"
+"-h,--help\thelp\n"
+"-D,--device\tplayback device\n"
+"-r,--rate\tstream rate in Hz\n"
+"-c,--channels\tcount of channels in stream\n"
+"-f,--frequency\tsine wave frequency in Hz\n"
+"-F,--format\tsample format\n"
+"-b,--buffer\tring buffer size in us\n"
+"-p,--period\tperiod size in us\n"
+"-P,--nperiods\tnumber of periods\n"
+"-t,--test\tpink=use pink noise, sine=use sine wave, wav=WAV file\n"
+"-l,--nloops\tspecify number of loops to test, 0 = infinite\n"
+"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
+"-w,--wavfile\tUse the given WAV file as a test sound\n"
+"-W,--wavdir\tSpecify the directory containing WAV files\n"
+"-m,--chmap\tSpecify the channel map to override\n"
+"\n"
+msgstr ""
+"Verwendung: speaker-test [Option]...\n"
+"-h,--help Hilfe\n"
+"-D,--device Wiedergabe-Gerät\n"
+"-r,--rate Sample-Rate in Hz\n"
+"-c,--channels Anzahl der Kanäle\n"
+"-f,--frequency Frequenz der Sinuswelle in Hz\n"
+"-F,--format Sample-Format\n"
+"-b,--buffer Ringpufferlänge in µs\n"
+"-p,--period Periodenlänge in µs\n"
+"-P,--nperiods Anzahl der Perioden\n"
+"-t,--test pink=rosa Rauschen, sine=Sinuswelle, wav=WAV-Datei\n"
+"-l,--nloops Anzahl der Wiederholungen, 0 = unendlich\n"
+"-s,--speaker teste einen einzelnen Lautsprecher; 1=links, 2=rechts, usw.\n"
+"-w,--wavfile benutze WAV-Datei als Testton\n"
+"-W,--wavdir benutze Verzeichnis mit darin enthaltenen WAV-Dateien\n"
+"\n"
+
+#: speaker-test/speaker-test.c:1063
+#, c-format
+msgid "Invalid number of periods %d\n"
+msgstr "Ungültige Periodenanzahl %d\n"
+
+#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#, c-format
+msgid "Invalid test type %s\n"
+msgstr "Ungültiger Test-Typ %s\n"
+
+#: speaker-test/speaker-test.c:1095
+#, c-format
+msgid "Invalid parameter for -s option.\n"
+msgstr "Ungültiger Wert für Option -s\n"
+
+#: speaker-test/speaker-test.c:1114
+#, c-format
+msgid "Unknown option '%c'\n"
+msgstr "Unbekannte Options '%c'\n"
+
+#: speaker-test/speaker-test.c:1128
+#, c-format
+msgid "Playback device is %s\n"
+msgstr "Wiedergabe-Gerät ist %s\n"
+
+#: speaker-test/speaker-test.c:1129
+#, c-format
+msgid "Stream parameters are %iHz, %s, %i channels\n"
+msgstr "Stream-Parameter sind %i Hz, %s, %i Kanäle\n"
+
+#: speaker-test/speaker-test.c:1132
+#, c-format
+msgid "Using 16 octaves of pink noise\n"
+msgstr "Verwende 16 Oktaven rosa Rauschen\n"
+
+#: speaker-test/speaker-test.c:1135
+#, c-format
+msgid "Sine wave rate is %.4fHz\n"
+msgstr "Sinuswelle mit Frequenz %.4f Hz\n"
+
+#: speaker-test/speaker-test.c:1138
+#, c-format
+msgid "WAV file(s)\n"
+msgstr "WAV-Datei(en)\n"
+
+#: speaker-test/speaker-test.c:1148
+#, c-format
+msgid "Playback open error: %d,%s\n"
+msgstr "Fehler beim Öffnen des Gerätes: %d, %s\n"
+
+#: speaker-test/speaker-test.c:1154
+#, c-format
+msgid "Setting of hwparams failed: %s\n"
+msgstr "Fehler beim Setzen der Hardware-Parameter: %s\n"
+
+#: speaker-test/speaker-test.c:1158
+#, c-format
+msgid "Setting of swparams failed: %s\n"
+msgstr "Fehler beim Setzen der Software-Parameter: %s\n"
+
+#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#, c-format
+msgid "Transfer failed: %s\n"
+msgstr "Schreibfehler: %s\n"
+
+#: speaker-test/speaker-test.c:1213
+#, c-format
+msgid "Time per period = %lf\n"
+msgstr "Zeit pro Periode = %lf\n"
+
+#~ msgid "Warning: format is changed to S16_LE\n"
+#~ msgstr "Warnung: benutztes Format ist S16_LE\n"
+
+#~ msgid "Warning: format is changed to S24_3LE\n"
+#~ msgstr "Warnung: benutztes Format ist S24_3LE\n"
+
+#~ msgid "Warning: format is changed to S24_LE\n"
+#~ msgstr "Warnung: benutztes Format ist S24_LE\n"
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
new file mode 100644
index 0000000..fedb6a0
--- /dev/null
+++ b/po/en@boldquot.header
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff --git a/po/en@quot.header b/po/en@quot.header
new file mode 100644
index 0000000..a9647fc
--- /dev/null
+++ b/po/en@quot.header
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff --git a/po/fr.gmo b/po/fr.gmo
new file mode 100644
index 0000000..bcb6497
--- /dev/null
+++ b/po/fr.gmo
Binary files differ
diff --git a/po/fr.po b/po/fr.po
new file mode 100644
index 0000000..92242d4
--- /dev/null
+++ b/po/fr.po
@@ -0,0 +1,1631 @@
+# French translation for alsa-utils
+# Copyright (C) 2011 The ALSA Team
+# This file is distributed under the same license as the alsa-utils package.
+# Christoph J. Thompson <cjsthompson@gmail.com>, 2011.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: alsa-utils 1.0.23\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"PO-Revision-Date: 2011-01-07 06:23+0100\n"
+"Last-Translator: Christoph J. Thompson <cjsthompson@gmail.com>\n"
+"Language-Team: French <fr@li.org>\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: alsamixer/card_select.c:126 alsamixer/device_name.c:126
+msgid "Sound Card"
+msgstr "Carte Son"
+
+#: alsamixer/card_select.c:181
+msgid "(default)"
+msgstr "(par défaut)"
+
+#: alsamixer/card_select.c:191
+msgid "cannot enumerate sound cards"
+msgstr "les cartes son n'ont pas pu être énumérées"
+
+#: alsamixer/card_select.c:215
+msgid "enter device name..."
+msgstr "entrez le nom du périphérique..."
+
+#: alsamixer/cli.c:40
+msgid "Usage: alsamixer [options]"
+msgstr "Utilisation: alsamixer [options]"
+
+#: alsamixer/cli.c:41
+msgid ""
+"Useful options:\n"
+" -h, --help this help\n"
+" -c, --card=NUMBER sound card number or id\n"
+" -D, --device=NAME mixer device name\n"
+" -V, --view=MODE starting view mode: playback/capture/all"
+msgstr ""
+"Options utiles:\n"
+" -h, --help cette aide\n"
+" -c, --card=NUMÉRO numéro ou identifiant de la carte son\n"
+" -D, --device=NOM nom du périphérique de mixage\n"
+" -V, --view=MODE mode de visualisation par défaut: lecture/capture/tous"
+
+#: alsamixer/cli.c:46
+msgid ""
+"Debugging options:\n"
+" -g, --no-color toggle using of colors\n"
+" -a, --abstraction=NAME mixer abstraction level: none/basic"
+msgstr ""
+"Options de débogage:\n"
+" -g, --no-color supprimer la couleur\n"
+" -a, --abstraction=NOM niveau d'abstraction du mixeur: aucun/basique"
+
+#: alsamixer/cli.c:77
+#, c-format
+msgid "invalid card index: %s\n"
+msgstr "index de carte invalide: %s\n"
+
+#: alsamixer/cli.c:103
+#, c-format
+msgid "unknown abstraction level: %s\n"
+msgstr "niveau d'abstraction inconnu: %s\n"
+
+#: alsamixer/cli.c:108
+#, c-format
+msgid "unknown option: %c\n"
+msgstr "option inconnue: %c\n"
+
+#: alsamixer/cli.c:110
+msgid "try `alsamixer --help' for more information\n"
+msgstr "essayez `alsamixer --help' pour plus d'information\n"
+
+#: alsamixer/device_name.c:177
+msgid "Device name:"
+msgstr "Nom du périphérique:"
+
+#: alsamixer/die.c:37
+#, c-format
+msgid "%s: %s\n"
+msgstr "%s: %s\n"
+
+#: alsamixer/mixer_display.c:98
+msgid "Card:"
+msgstr "Carte:"
+
+#: alsamixer/mixer_display.c:99
+msgid "Chip:"
+msgstr "Puce:"
+
+#: alsamixer/mixer_display.c:100
+msgid "View:"
+msgstr "Vue:"
+
+#: alsamixer/mixer_display.c:101
+msgid "Item:"
+msgstr "Contrôle:"
+
+#: alsamixer/mixer_display.c:104
+msgid "F1: Help"
+msgstr "F1: Aide"
+
+#: alsamixer/mixer_display.c:105
+msgid "F2: System information"
+msgstr "F2: Informations Système"
+
+#: alsamixer/mixer_display.c:106
+msgid "F6: Select sound card"
+msgstr "F6: Choisir la carte son"
+
+#: alsamixer/mixer_display.c:107
+msgid "Esc: Exit"
+msgstr "Esc: Quitter"
+
+#: alsamixer/mixer_display.c:174
+msgid "(unplugged)"
+msgstr "(non branché)"
+
+#: alsamixer/mixer_display.c:192
+msgid "Playback"
+msgstr "Lecture"
+
+#: alsamixer/mixer_display.c:193
+msgid "Capture"
+msgstr "Capture"
+
+#: alsamixer/mixer_display.c:194
+msgid "All"
+msgstr "Tout"
+
+#: alsamixer/mixer_display.c:234
+msgid "mute"
+msgstr "muet"
+
+#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+msgid "dB gain:"
+msgstr "gain dB:"
+
+#: alsamixer/mixer_display.c:285
+#, c-format
+msgid " [%s %s, %s]"
+msgstr " [%s %s, %s]"
+
+#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
+#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+msgid "Off"
+msgstr "Fermé"
+
+#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+msgid "On"
+msgstr "Ouvert"
+
+#: alsamixer/mixer_display.c:363
+msgid "The sound device was unplugged."
+msgstr "Le périphérique a été débranché"
+
+#: alsamixer/mixer_display.c:364
+msgid "Press F6 to select another sound card."
+msgstr "Appuyez sur F6 pour choisir une autre carte son."
+
+#: alsamixer/mixer_display.c:379
+msgid "This sound device does not have any playback controls."
+msgstr "Ce périphérique n'a pas de commandes de lecture."
+
+#: alsamixer/mixer_display.c:381
+msgid "This sound device does not have any capture controls."
+msgstr "Ce périphérique n'a pas de commandes de capture."
+
+#: alsamixer/mixer_display.c:383
+msgid "This sound device does not have any controls."
+msgstr "Ce périphérique n'a pas de commandes."
+
+#. TRANSLATORS: playback on; one character
+#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+msgid "O"
+msgstr "O"
+
+#. TRANSLATORS: playback muted; one character
+#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+msgid "M"
+msgstr "M"
+
+#. TRANSLATORS: "left"; no more than two characters
+#: alsamixer/mixer_display.c:536
+msgid "L"
+msgstr "G"
+
+#. TRANSLATORS: "right"; no more than two characters
+#: alsamixer/mixer_display.c:540
+msgid "R"
+msgstr "D"
+
+#. TRANSLATORS: no more than eight characters
+#: alsamixer/mixer_display.c:542
+msgid "CAPTURE"
+msgstr "CAPTURE"
+
+#: alsamixer/mixer_display.c:592
+msgid "Front"
+msgstr "Avant"
+
+#: alsamixer/mixer_display.c:595
+msgid "Rear"
+msgstr "Arrière"
+
+#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+msgid "Center"
+msgstr "Centre"
+
+#: alsamixer/mixer_display.c:601
+msgid "Woofer"
+msgstr "Basses"
+
+#: alsamixer/mixer_display.c:604
+msgid "Side"
+msgstr "Côté"
+
+#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+msgid "cannot open mixer"
+msgstr "le mixeur ne peut pas être ouvert"
+
+#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+msgid "cannot load mixer controls"
+msgstr "les commandes de mixage ne peuvent pas être chargés"
+
+#: alsamixer/mixer_widget.c:169
+#, c-format
+msgid "Cannot open mixer device '%s'."
+msgstr "Le périphérique de mixage '%s' ne peut pas être ouvert."
+
+#: alsamixer/mixer_widget.c:190
+msgid "Esc Exit"
+msgstr "Esc Quitter"
+
+#: alsamixer/mixer_widget.c:191
+msgid "F1 ? H Help"
+msgstr "F1 ? H Aide"
+
+#: alsamixer/mixer_widget.c:192
+msgid "F2 / System information"
+msgstr "F2 / Informations système"
+
+#: alsamixer/mixer_widget.c:193
+msgid "F3 Show playback controls"
+msgstr "F3 Afficher les commandes de lecture"
+
+#: alsamixer/mixer_widget.c:194
+msgid "F4 Show capture controls"
+msgstr "F4 Afficher les commandes de capture"
+
+#: alsamixer/mixer_widget.c:195
+msgid "F5 Show all controls"
+msgstr "F5 Afficher toutes les commandes"
+
+#: alsamixer/mixer_widget.c:196
+msgid "Tab Toggle view mode (F3/F4/F5)"
+msgstr "Tab Choisir le mode de visualisation (F3/F4/F5)"
+
+#: alsamixer/mixer_widget.c:197
+msgid "F6 S Select sound card"
+msgstr "F6 S Choisir la carte son"
+
+#: alsamixer/mixer_widget.c:198
+msgid "L Redraw screen"
+msgstr "L Actualiser l'écran"
+
+#: alsamixer/mixer_widget.c:200
+msgid "Left Move to the previous control"
+msgstr "Gauche Aller à la commande précédente"
+
+#: alsamixer/mixer_widget.c:201
+msgid "Right Move to the next control"
+msgstr "Droite Aller à la commande suivante"
+
+#: alsamixer/mixer_widget.c:203
+msgid "Up/Down Change volume"
+msgstr "Haut/Bas Ajuster le volume"
+
+#: alsamixer/mixer_widget.c:204
+msgid "+ - Change volume"
+msgstr "+ - Ajuster le volume"
+
+#: alsamixer/mixer_widget.c:205
+msgid "Page Up/Dn Change volume in big steps"
+msgstr "Page Préc./Suiv. Ajuster le volume en grandes intervalles"
+
+#: alsamixer/mixer_widget.c:206
+msgid "End Set volume to 0%"
+msgstr "Fin Couper le volume"
+
+#: alsamixer/mixer_widget.c:207
+msgid "0-9 Set volume to 0%-90%"
+msgstr "0-9 Ajuster le volume entre 0 et 90%"
+
+#: alsamixer/mixer_widget.c:208
+msgid "Q W E Increase left/both/right volumes"
+msgstr "Q W E Augmenter les volumes de gauche/centre/droite"
+
+#. TRANSLATORS: or Y instead of Z
+#: alsamixer/mixer_widget.c:210
+msgid "Z X C Decrease left/both/right volumes"
+msgstr "Z X C Baisser les volumes de gauche/centre/droite"
+
+#: alsamixer/mixer_widget.c:211
+msgid "B Balance left and right volumes"
+msgstr "B Égaliser les volumes de gauche et droite"
+
+#: alsamixer/mixer_widget.c:213
+msgid "M Toggle mute"
+msgstr "M (Dés)activer le mode muet"
+
+#. TRANSLATORS: or , .
+#: alsamixer/mixer_widget.c:215
+msgid "< > Toggle left/right mute"
+msgstr "< > (Dés)activer le mode muet à gauche et à droite"
+
+#: alsamixer/mixer_widget.c:217
+msgid "Space Toggle capture"
+msgstr "Espace (Dés)activer la capture"
+
+#. TRANSLATORS: or Insert Delete
+#: alsamixer/mixer_widget.c:219
+msgid "; ' Toggle left/right capture"
+msgstr "; (Dés)activer la capture à gauche et à droite"
+
+#: alsamixer/mixer_widget.c:221
+msgid "Authors:"
+msgstr "Auteurs:"
+
+#: alsamixer/mixer_widget.c:222
+msgid " Tim Janik"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:223
+msgid " Jaroslav Kysela <perex@perex.cz>"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:224
+msgid " Clemens Ladisch <clemens@ladisch.de>"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:226
+msgid "Help"
+msgstr "Aide"
+
+#: alsamixer/proc_files.c:103
+msgid "Select File"
+msgstr "Choisir un Fichier"
+
+#: alsamixer/textbox.c:52 alsamixer/textbox.c:66
+msgid "Error"
+msgstr "Erreur"
+
+#: alsamixer/textbox.c:80
+#, c-format
+msgid "Cannot open file \"%s\"."
+msgstr "Le fichier \"%s\" n'a pas pu être ouvert."
+
+#: aplay/aplay.c:175
+msgid "raw data"
+msgstr "données brutes"
+
+#: aplay/aplay.c:176
+msgid "VOC"
+msgstr ""
+
+#: aplay/aplay.c:178
+msgid "WAVE"
+msgstr ""
+
+#: aplay/aplay.c:179
+msgid "Sparc Audio"
+msgstr ""
+
+#: aplay/aplay.c:200
+#, fuzzy, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"\n"
+"-h, --help help\n"
+" --version print current version\n"
+"-l, --list-devices list all soundcards and digital audio devices\n"
+"-L, --list-pcms list device names\n"
+"-D, --device=NAME select PCM by name\n"
+"-q, --quiet quiet mode\n"
+"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
+"-c, --channels=# channels\n"
+"-f, --format=FORMAT sample format (case insensitive)\n"
+"-r, --rate=# sample rate\n"
+"-d, --duration=# interrupt after # seconds\n"
+"-M, --mmap mmap stream\n"
+"-N, --nonblock nonblocking mode\n"
+"-F, --period-time=# distance between interrupts is # microseconds\n"
+"-B, --buffer-time=# buffer duration is # microseconds\n"
+" --period-size=# distance between interrupts is # frames\n"
+" --buffer-size=# buffer duration is # frames\n"
+"-A, --avail-min=# min available space for wakeup is # microseconds\n"
+"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
+" (relative to buffer size if <= 0)\n"
+"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from "
+"xrun\n"
+"-v, --verbose show PCM structure and setup (accumulative)\n"
+"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
+"-I, --separate-channels one file for each channel\n"
+"-i, --interactive allow interactive operation from stdin\n"
+"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
+" --disable-resample disable automatic rate resample\n"
+" --disable-channels disable automatic channel conversions\n"
+" --disable-format disable automatic format conversions\n"
+" --disable-softvol disable software volume control (softvol)\n"
+" --test-position test ring buffer position\n"
+" --test-coef=# test coefficient for ring buffer position (default "
+"8)\n"
+" expression for validation is: coef * (buffer_size / "
+"2)\n"
+" --test-nowait do not wait for ring buffer - eats whole CPU\n"
+" --max-file-time=# start another output file when the old file has "
+"recorded\n"
+" for this many seconds\n"
+" --process-id-file write the process ID here\n"
+" --use-strftime apply the strftime facility to the output file name\n"
+" --dump-hw-params dump hw_params of the device\n"
+" --fatal-errors treat all errors as fatal\n"
+msgstr ""
+"Utilisation: %s [OPTION]... [FICHIER]...\n"
+"\n"
+"-h, --help aide\n"
+" --version afficher la version du programme\n"
+"-l, --list-devices afficher la listes des périphériques\n"
+"-L, --list-pcms afficher la liste des noms de périphériques\n"
+"-D, --device=NOM choisir le périphérique PCM par son nom\n"
+"-Q, --quiet mode silencieux\n"
+"-t, --file-type TYPE type de fichier (voc, wav, raw ou au)\n"
+"-c, --channels=# canaux\n"
+"-f, --format=FORMAT format d'échantillonage (insensible à la casse)\n"
+"-r, --rate=# fréquence d'échantillonage\n"
+"-d, --duration=# interrompre après # secondes\n"
+"-M, --mmap charger le flux en mémoire avec mmap\n"
+"-N, --nonblock mode non-bloquant\n"
+"-F, --period-time=# # microsecondes entre chaque interruption\n"
+"-B, --buffer-time=# la durée du tampon est de # microsecondes\n"
+" --period-size=# # trames entre chaque interruption\n"
+" --buffer-size=# la durée du tampon est de # trames\n"
+"-A, --avail-min=# # microsecondes min. disponibles entre chaque "
+"réveil\n"
+"-R, --start-delay=# # microsecondes de délai avant le démarrage\n"
+" automatique du périphérique PCM (relatif à la "
+"taille\n"
+" du tampon si <= 0)\n"
+"-T, --stop-delay=# # microsecondes de délai depuis xrun avant l'arrêt\n"
+" automatique du périphérique PCM \n"
+"-v, --verbose afficher la structure et la configuration du\n"
+" périphérique PCM (accumulatif)\n"
+"-V, --vumeter=TYPE activer le VU-mètre (TYPE: mono ou stereo)\n"
+"-I, --separate-channels un fichier par canal\n"
+" --disable-resample désactiver le rééchantillonage de fréquence\n"
+" automatique\n"
+" --disable-channels désactiver les conversions automatiques de canal\n"
+" --disable-format désactiver les conversions automatiques de format\n"
+" --disable-softvol désactiver la commande du volume logicielle\n"
+" --test-position tester la position du tampon circulaire\n"
+" --test-coef=# test coefficient pour la position du tampon\n"
+" circulaire (par défaut 8). L'expression pour la\n"
+" validation est : coef * (taille_tampon / 2)\n"
+" --test-nowait ne pas attendre le tampon circulaire - prend toutes\n"
+" les resources du processeur\n"
+" --max-file-time=# commencer un autre fichier de capture quand "
+"l'ancien\n"
+" fichier a enregistré pendant # secondes\n"
+" --process-id-file écrire l'identifiant du processus ici\n"
+" --use-strftime utiliser strftime pour le nom du fichier de capture\n"
+
+#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#, c-format
+msgid "Recognized sample formats are:"
+msgstr "Les formats d'échantillonage connus sont:"
+
+#: aplay/aplay.c:250
+#, c-format
+msgid ""
+"\n"
+"Some of these may not be available on selected hardware\n"
+msgstr ""
+"\n"
+"Certains de ceux-ci ne sont peut être pas disponibles avec ce matériel\n"
+
+#: aplay/aplay.c:251
+#, fuzzy, c-format
+msgid "The available format shortcuts are:\n"
+msgstr "Les raccourcis format disponibles sont:\n"
+
+#: aplay/aplay.c:252
+#, c-format
+msgid "-f cd (16 bit little endian, 44100, stereo)\n"
+msgstr "-f cd (16 bit petit boutiste, 44100, stéréo)\n"
+
+#: aplay/aplay.c:253
+#, c-format
+msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
+msgstr "-f cdr (16 bit gros boutiste, 44100, stéréo)\n"
+
+#: aplay/aplay.c:254
+#, c-format
+msgid "-f dat (16 bit little endian, 48000, stereo)\n"
+msgstr "-f dat (16 bit petit boutiste, 48000, stéréo)\n"
+
+#: aplay/aplay.c:268
+msgid "no soundcards found..."
+msgstr "aucune carte son n'a été trouvée..."
+
+#: aplay/aplay.c:271
+#, c-format
+msgid "**** List of %s Hardware Devices ****\n"
+msgstr "**** Liste des Périphériques Matériels %s ****\n"
+
+#: aplay/aplay.c:300
+#, c-format
+msgid "card %i: %s [%s], device %i: %s [%s]\n"
+msgstr "carte %i: %s [%s], périphérique %i: %s [%s]\n"
+
+#: aplay/aplay.c:306
+#, c-format
+msgid " Subdevices: %i/%i\n"
+msgstr " Sous-périphériques: %i/%i\n"
+
+#: aplay/aplay.c:313
+#, c-format
+msgid " Subdevice #%i: %s\n"
+msgstr " Sous-périphérique #%i: %s\n"
+
+#: aplay/aplay.c:394
+#, c-format
+msgid "Aborted by signal %s...\n"
+msgstr "Interrompu par le signal %s...\n"
+
+#: aplay/aplay.c:512
+msgid "command should be named either arecord or aplay"
+msgstr "la commande doit être nommée arecord ou aplay"
+
+#: aplay/aplay.c:556
+#, c-format
+msgid "unrecognized file format %s"
+msgstr "format de fichier inconnu %s"
+
+#: aplay/aplay.c:563
+#, c-format
+msgid "value %i for channels is invalid"
+msgstr "la valeur %i pour les canaux est incorrecte"
+
+#: aplay/aplay.c:582
+#, c-format
+msgid "wrong extended format '%s'"
+msgstr "format étendu '%s' erronné"
+
+#: aplay/aplay.c:593
+#, c-format
+msgid "bad speed value %i"
+msgstr "mauvaise valeur de vitesse %i"
+
+#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
+#, c-format
+msgid "Unable to parse channel map string: %s\n"
+msgstr ""
+
+#: aplay/aplay.c:706
+#, c-format
+msgid "Try `%s --help' for more information.\n"
+msgstr "Essayez `%s --help' pour plus d'informations.\n"
+
+#: aplay/aplay.c:722
+#, c-format
+msgid "audio open error: %s"
+msgstr "erreur à l'ouverture audio: %s"
+
+#: aplay/aplay.c:727
+#, c-format
+msgid "info error: %s"
+msgstr "erreur info: %s"
+
+#: aplay/aplay.c:734
+#, c-format
+msgid "nonblock setting error: %s"
+msgstr "paramètre de non-blocage erronné: %s"
+
+#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
+#: aplay/aplay.c:1867 aplay/aplay.c:1897
+msgid "not enough memory"
+msgstr "pas assez de mémoire"
+
+#: aplay/aplay.c:768
+#, c-format
+msgid "Cannot create process ID file %s: %s"
+msgstr "Le fichier de numéro de processus %s n'a pas pu être créé: %s"
+
+#: aplay/aplay.c:858
+#, c-format
+msgid "read error (called from line %i)"
+msgstr "erreur de lecture (appelé à la ligne %i)"
+
+#: aplay/aplay.c:925
+#, c-format
+msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
+msgstr "longueur du morceau 'fmt ' inconnue (lu %u, devrait être au moins %u)"
+
+#: aplay/aplay.c:936
+#, c-format
+msgid ""
+"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+"longueur du morceau 'fmt ' extensible inconnue (lu %u, devrait être au moins "
+"%u)"
+
+#: aplay/aplay.c:941
+msgid "wrong format tag in extensible 'fmt ' chunk"
+msgstr "libellé de format erronné dans le morceau extensible 'fmt '"
+
+#: aplay/aplay.c:948
+#, c-format
+msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
+msgstr ""
+"Les formats de ficher WAVE 0x%04x qui ne sont pas encodés en PCM ouFLOAT ne "
+"sont pas supportés"
+
+#: aplay/aplay.c:953
+#, c-format
+msgid "can't play WAVE-files with %d tracks"
+msgstr "Les fichiers WAVE avec %d pistes ne sont pas supportés"
+
+#: aplay/aplay.c:961 aplay/aplay.c:1087
+#, c-format
+msgid "Warning: format is changed to U8\n"
+msgstr "Avertissement: le format est changé en U8\n"
+
+#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
+#, fuzzy, c-format
+msgid "Warning: format is changed to %s\n"
+msgstr "Avertissement: le format est changé en U8\n"
+
+#: aplay/aplay.c:1000
+#, c-format
+msgid ""
+" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
+msgstr ""
+" les fichiers WAVE échantillonés %d bits par %d octets en largeur (%d canaux)"
+"ne sont pas supportés"
+
+#: aplay/aplay.c:1023
+#, c-format
+msgid " can't play WAVE-files with sample %d bits wide"
+msgstr ""
+" les fichiers WAVES échantillonés %d bits en largeur ne sont passupportés"
+
+#: aplay/aplay.c:1081
+#, c-format
+msgid "Warning: format is changed to MU_LAW\n"
+msgstr "Avertissement: le format est changé en MU_LAW\n"
+
+#: aplay/aplay.c:1093
+#, c-format
+msgid "Warning: format is changed to S16_BE\n"
+msgstr "Avertissement: le format est changé en S16_BE\n"
+
+#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
+#: aplay/aplay.c:2727
+msgid "read error"
+msgstr "erreur de lecture"
+
+#: aplay/aplay.c:1136
+msgid "Channel numbers don't match between hw_params and channel map"
+msgstr ""
+
+#: aplay/aplay.c:1145
+#, c-format
+msgid "Warning: unable to get channel map\n"
+msgstr ""
+
+#: aplay/aplay.c:1178
+#, c-format
+msgid "Channel %d doesn't match with hw_parmas"
+msgstr ""
+
+#: aplay/aplay.c:1204
+msgid "Broken configuration for this PCM: no configurations available"
+msgstr "Configuration erronée pour ce périphérique PCM: pas de configuration"
+
+#: aplay/aplay.c:1208
+#, c-format
+msgid "HW Params of device \"%s\":\n"
+msgstr ""
+
+#: aplay/aplay.c:1228
+msgid "Access type not available"
+msgstr "Ce type d'accès n'est pas disponible"
+
+#: aplay/aplay.c:1233
+msgid "Sample format non available"
+msgstr "Ce format d'échantillonage n'est pas disponible"
+
+#: aplay/aplay.c:1239
+msgid "Channels count non available"
+msgstr "Nombre de canaux non disponible"
+
+#: aplay/aplay.c:1254
+#, c-format
+msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
+msgstr ""
+"Avertissement: la fréquence n'est pas précise (demandé = %iHz,\n"
+"obtenu = %iHz)\n"
+
+#: aplay/aplay.c:1260
+#, c-format
+msgid " please, try the plug plugin %s\n"
+msgstr " veuillez essayez le greffon de branchement %s\n"
+
+#: aplay/aplay.c:1297
+msgid "Unable to install hw params:"
+msgstr "Les paramètres matériel n'ont pas pu être installés:"
+
+#: aplay/aplay.c:1304
+#, c-format
+msgid "Can't use period equal to buffer size (%lu == %lu)"
+msgstr ""
+"Une période égale à la taille du tampon (%lu == %lu) ne peut êtreutilisée"
+
+#: aplay/aplay.c:1335
+msgid "unable to install sw params:"
+msgstr "Les paramètres logiciel n'ont pas pu être installés:"
+
+#: aplay/aplay.c:1369
+#, c-format
+msgid "snd_pcm_mmap_begin problem: %s"
+msgstr ""
+
+#: aplay/aplay.c:1398
+#, c-format
+msgid "stdin O_NONBLOCK flag setup failed\n"
+msgstr ""
+
+#: aplay/aplay.c:1422
+#, c-format
+msgid "\rPAUSE command ignored (no hw support)\n"
+msgstr ""
+
+#: aplay/aplay.c:1427
+#, fuzzy, c-format
+msgid "pause push error: %s"
+msgstr "erreur d'état: %s"
+
+#: aplay/aplay.c:1436
+#, fuzzy, c-format
+msgid "pause release error: %s"
+msgstr "suspension: prepare error: %s"
+
+#: aplay/aplay.c:1452
+#, c-format
+msgid ""
+"\r=== PAUSE === "
+msgstr ""
+
+#: aplay/aplay.c:1494
+#, c-format
+msgid "status error: %s"
+msgstr "erreur d'état: %s"
+
+#: aplay/aplay.c:1499
+#, fuzzy, c-format
+msgid "fatal %s: %s"
+msgstr "%s: %s\n"
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
+msgid "underrun"
+msgstr "perte"
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
+msgid "overrun"
+msgstr "dépassement"
+
+#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#, c-format
+msgid "%s!!! (at least %.3f ms long)\n"
+msgstr "%s!!! (au moins longue de %.3f ms)\n"
+
+#: aplay/aplay.c:1526
+#, c-format
+msgid "Status:\n"
+msgstr "État:\n"
+
+#: aplay/aplay.c:1530
+#, c-format
+msgid "xrun: prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1536
+#, c-format
+msgid "Status(DRAINING):\n"
+msgstr ""
+
+#: aplay/aplay.c:1540
+#, c-format
+msgid "capture stream format change? attempting recover...\n"
+msgstr ""
+"changement de format de flux de capture? tentative de récupération...\n"
+
+#: aplay/aplay.c:1542
+#, c-format
+msgid "xrun(DRAINING): prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1549
+#, c-format
+msgid "Status(R/W):\n"
+msgstr ""
+
+#: aplay/aplay.c:1552
+#, c-format
+msgid "read/write error, state = %s"
+msgstr "erreur de lecture/écriture, état = %s"
+
+#: aplay/aplay.c:1562
+#, c-format
+msgid "Suspended. Trying resume. "
+msgstr "Suspendu. Tentative de reprise. "
+
+#: aplay/aplay.c:1567
+#, c-format
+msgid "Failed. Restarting stream. "
+msgstr "Échec. Redémarrage du flux."
+
+#: aplay/aplay.c:1569
+#, c-format
+msgid "suspend: prepare error: %s"
+msgstr "suspension: prepare error: %s"
+
+#: aplay/aplay.c:1574
+#, c-format
+msgid "Done.\n"
+msgstr "Terminé.\n"
+
+#: aplay/aplay.c:1596
+#, c-format
+msgid " !clip "
+msgstr ""
+
+#: aplay/aplay.c:1743
+#, c-format
+msgid "Unsupported bit size %d.\n"
+msgstr "%d bit(s) non supporté(s).\n"
+
+#: aplay/aplay.c:1777
+#, c-format
+msgid "Max peak (%li samples): 0x%08x "
+msgstr "Pic max. (%li échantillons): 0x%08x "
+
+#: aplay/aplay.c:1811
+#, c-format
+msgid ""
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
+"%li\n"
+msgstr ""
+"Position de tampon suspicieuse (total %li): dispo = %li, délai = %li, tampon "
+"= %li\n"
+
+#: aplay/aplay.c:1939
+#, c-format
+msgid "write error: %s"
+msgstr "erreur en écriture: %s"
+
+#: aplay/aplay.c:1987
+#, c-format
+msgid "writev error: %s"
+msgstr "erreur de writev: %s"
+
+#: aplay/aplay.c:2031
+#, c-format
+msgid "read error: %s"
+msgstr "erreur en lecture: %s"
+
+#: aplay/aplay.c:2075
+#, c-format
+msgid "readv error: %s"
+msgstr "erreur de readv: %s"
+
+#: aplay/aplay.c:2123
+msgid "can't allocate buffer for silence"
+msgstr "Un tampon pour silence n'a pas pu être alloué"
+
+#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
+#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
+#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+msgid "write error"
+msgstr "erreur en écriture"
+
+#: aplay/aplay.c:2145
+#, c-format
+msgid "voc_pcm_flush - silence error"
+msgstr "voc_pcm_flush - erreur de silence"
+
+#: aplay/aplay.c:2148
+msgid "voc_pcm_flush error"
+msgstr "erreur voc_pcm_flush"
+
+#: aplay/aplay.c:2173
+msgid "malloc error"
+msgstr "erreur malloc"
+
+#: aplay/aplay.c:2177
+#, c-format
+msgid "Playing Creative Labs Channel file '%s'...\n"
+msgstr "Lecture du ficher de canaux Creative Labs '%s'...\n"
+
+#: aplay/aplay.c:2245 aplay/aplay.c:2340
+msgid "can't play packed .voc files"
+msgstr "les fichiers .voc de type 'packed' ne sont pas supportés"
+
+#: aplay/aplay.c:2300
+#, c-format
+msgid "can't play loops; %s isn't seekable\n"
+msgstr "%s n'est pas navigable; les motifs n'ont pas pu être lus\n"
+
+#: aplay/aplay.c:2349
+#, c-format
+msgid "unknown blocktype %d. terminate."
+msgstr "type de bloc %d inconnu. fin."
+
+#: aplay/aplay.c:2480
+#, c-format
+msgid "Wave doesn't support %s format..."
+msgstr "Le format wave %s n'est pas supporté..."
+
+#: aplay/aplay.c:2540
+#, c-format
+msgid "Sparc Audio doesn't support %s format..."
+msgstr "Le format %s Sparc Audio n'est pas supporté..."
+
+#: aplay/aplay.c:2621
+msgid "Playing"
+msgstr "Lecture"
+
+#: aplay/aplay.c:2621
+msgid "Recording"
+msgstr "Capture"
+
+#: aplay/aplay.c:2625
+#, c-format
+msgid "Rate %d Hz, "
+msgstr "Fréquence %d Hz, "
+
+#: aplay/aplay.c:2627
+#, c-format
+msgid "Mono"
+msgstr ""
+
+#: aplay/aplay.c:2629
+#, c-format
+msgid "Stereo"
+msgstr "Stéréo"
+
+#: aplay/aplay.c:2631
+#, c-format
+msgid "Channels %i"
+msgstr "%i Canaux"
+
+#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#, c-format
+msgid "You need to specify %d files"
+msgstr "Vous devez spécifier %d fichiers"
+
+#: seq/aconnect/aconnect.c:49
+#, c-format
+msgid "aconnect - ALSA sequencer connection manager\n"
+msgstr "aconnect - gestionnaire de connection séquenceur ALSA\n"
+
+#: seq/aconnect/aconnect.c:50
+#, c-format
+msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:51
+#, c-format
+msgid "Usage:\n"
+msgstr "Utilisation:\n"
+
+#: seq/aconnect/aconnect.c:52
+#, c-format
+msgid " * Connection/disconnection between two ports\n"
+msgstr " * Connexion/déconnexion entre deux ports\n"
+
+#: seq/aconnect/aconnect.c:53
+#, c-format
+msgid " aconnect [-options] sender receiver\n"
+msgstr " aconnect [-options] envoyeur destinataire\n"
+
+#: seq/aconnect/aconnect.c:54
+#, c-format
+msgid " sender, receiver = client:port pair\n"
+msgstr " envoyeur, destinataire = couple client:port\n"
+
+#: seq/aconnect/aconnect.c:55
+#, c-format
+msgid " -d,--disconnect disconnect\n"
+msgstr " -d,--disconnect déconnecter\n"
+
+#: seq/aconnect/aconnect.c:56
+#, c-format
+msgid " -e,--exclusive exclusive connection\n"
+msgstr " -e,--exclusive connexion exclusive\n"
+
+#: seq/aconnect/aconnect.c:57
+#, c-format
+msgid " -r,--real # convert real-time-stamp on queue\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:58
+#, c-format
+msgid " -t,--tick # convert tick-time-stamp on queue\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:59
+#, c-format
+msgid " * List connected ports (no subscription action)\n"
+msgstr " * Afficher la liste des ports connectés (pas de souscription)\n"
+
+#: seq/aconnect/aconnect.c:60
+#, c-format
+msgid " aconnect -i|-o [-options]\n"
+msgstr " aconnect -i|-o [-options]\n"
+
+#: seq/aconnect/aconnect.c:61
+#, c-format
+msgid " -i,--input list input (readable) ports\n"
+msgstr " -i,--input afficher la liste des ports d'entrée\n"
+
+#: seq/aconnect/aconnect.c:62
+#, c-format
+msgid " -o,--output list output (writable) ports\n"
+msgstr " -o,--output afficher la liste des ports de sortie\n"
+
+#: seq/aconnect/aconnect.c:63
+#, c-format
+msgid " -l,--list list current connections of each port\n"
+msgstr ""
+" -l,--list afficher la liste des connexions en cours\n"
+" sur chaque port\n"
+
+#: seq/aconnect/aconnect.c:64
+#, c-format
+msgid " * Remove all exported connections\n"
+msgstr " * Retirer toutes les connexions exportées\n"
+
+#: seq/aconnect/aconnect.c:65
+#, c-format
+msgid " -x, --removeall\n"
+msgstr " -x, --removeall\n"
+
+#: seq/aconnect/aconnect.c:132
+msgid "Connecting To"
+msgstr "Connexion À"
+
+#: seq/aconnect/aconnect.c:133
+msgid "Connected From"
+msgstr "Connecté Depuis"
+
+#: seq/aconnect/aconnect.c:169
+#, c-format
+msgid "client %d: '%s' [type=%s]\n"
+msgstr "client %d: '%s' [type=%s]\n"
+
+#: seq/aconnect/aconnect.c:173
+msgid "user"
+msgstr "utilisateur"
+
+#: seq/aconnect/aconnect.c:173
+msgid "kernel"
+msgstr "noyau"
+
+#: seq/aconnect/aconnect.c:307
+#, c-format
+msgid "can't open sequencer\n"
+msgstr "le séquenceur n'a pas pu être ouvert\n"
+
+#: seq/aconnect/aconnect.c:335
+#, c-format
+msgid "can't get client id\n"
+msgstr "l'identifiant du client n'as pas pu être obtenu\n"
+
+#: seq/aconnect/aconnect.c:342
+#, c-format
+msgid "can't set client info\n"
+msgstr "les infos du client n'ont pas pu être définies\n"
+
+#: seq/aconnect/aconnect.c:349
+#, c-format
+msgid "invalid sender address %s\n"
+msgstr "l'addresse envoyeur %s est incorrecte\n"
+
+#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
+#, c-format
+msgid "invalid destination address %s\n"
+msgstr "l'addresse destinataire %s est incorrecte\n"
+
+#: seq/aconnect/aconnect.c:368
+#, c-format
+msgid "No subscription is found\n"
+msgstr "Aucune souscription trouvée\n"
+
+#: seq/aconnect/aconnect.c:373
+#, c-format
+msgid "Disconnection failed (%s)\n"
+msgstr "La déconnexion a échoué (%s)\n"
+
+#: seq/aconnect/aconnect.c:379
+#, c-format
+msgid "Connection is already subscribed\n"
+msgstr "La connexion a déjà été souscrite\n"
+
+#: seq/aconnect/aconnect.c:384
+#, c-format
+msgid "Connection failed (%s)\n"
+msgstr "Échec de connexion (%s)\n"
+
+#: seq/aseqnet/aseqnet.c:164
+#, c-format
+msgid "aseqnet - network client/server on ALSA sequencer\n"
+msgstr "aseqnet - client/serveur réseau sur le séquenceur ALSA\n"
+
+#: seq/aseqnet/aseqnet.c:165
+#, c-format
+msgid " Copyright (C) 1999 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:166
+#, c-format
+msgid "usage:\n"
+msgstr "utilisation:\n"
+
+#: seq/aseqnet/aseqnet.c:167
+#, c-format
+msgid " server mode: aseqnet [-options]\n"
+msgstr " mode serveur: aseqnet [-options]\n"
+
+#: seq/aseqnet/aseqnet.c:168
+#, c-format
+msgid " client mode: aseqnet [-options] server_host\n"
+msgstr " mode client: aseqnet [-options] hôte_serveur\n"
+
+#: seq/aseqnet/aseqnet.c:169
+#, c-format
+msgid "options:\n"
+msgstr "options:\n"
+
+#: seq/aseqnet/aseqnet.c:170
+#, fuzzy, c-format
+msgid " -p,--port # : specify TCP port (digit or service name)\n"
+msgstr " -p,--port # : spécifier le port TCP (numéro ou nom de service)\n"
+
+#: seq/aseqnet/aseqnet.c:171
+#, c-format
+msgid " -s,--source addr : read from given addr (client:port)\n"
+msgstr " -s,--source addr : lire à partir de l'addr. donnée (client:port)\n"
+
+#: seq/aseqnet/aseqnet.c:172
+#, c-format
+msgid " -d,--dest addr : write to given addr (client:port)\n"
+msgstr " -d,--dest addr : écrire à l'addr. donnée (client:port)\n"
+
+#: seq/aseqnet/aseqnet.c:173
+#, c-format
+msgid " -v, --verbose : print verbose messages\n"
+msgstr " -v, --verbose : affichage locace de messages\n"
+
+#: seq/aseqnet/aseqnet.c:174
+#, c-format
+msgid " -i, --info : print certain received events\n"
+msgstr " -i, --info : afficher certains évènements reçus\n"
+
+#: seq/aseqnet/aseqnet.c:188
+#, c-format
+msgid "can't malloc\n"
+msgstr "échec allocation mémoire (malloc)\n"
+
+#: seq/aseqnet/aseqnet.c:213
+#, c-format
+msgid "closing files..\n"
+msgstr "fermeture des fichiers...\n"
+
+#: seq/aseqnet/aseqnet.c:272
+#, c-format
+msgid "sequencer opened: %d:%d\n"
+msgstr "séquenceur ouvert: %d:%d\n"
+
+#: seq/aseqnet/aseqnet.c:279
+#, c-format
+msgid "invalid source address %s\n"
+msgstr "addresse source %s incorrecte\n"
+
+#: seq/aseqnet/aseqnet.c:309
+#, c-format
+msgid "service '%s' is not found in /etc/services\n"
+msgstr "le service '%s' n'as pas été trouvé dans /etc/services\n"
+
+#: seq/aseqnet/aseqnet.c:377
+#, c-format
+msgid "too many connections!\n"
+msgstr "trop de connexions!\n"
+
+#: seq/aseqnet/aseqnet.c:388
+#, c-format
+msgid "accepted[%d]\n"
+msgstr "accepté[%d]\n"
+
+#: seq/aseqnet/aseqnet.c:411
+#, c-format
+msgid "can't get address %s\n"
+msgstr "l'addresse %s na pas pu être obtenue\n"
+
+#: seq/aseqnet/aseqnet.c:422
+#, c-format
+msgid "ok.. connected\n"
+msgstr "ok.. connecté\n"
+
+#: seq/aseqnet/aseqnet.c:518
+#, c-format
+msgid "Channel %2d: Control event : %5d\n"
+msgstr "Canal %2d: Évènement de contrôle: %5d\n"
+
+#: seq/aseqnet/aseqnet.c:522
+#, c-format
+msgid "Channel %2d: Pitchbender : %5d\n"
+msgstr "Canal %2d: Pitchbender : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:526
+#, c-format
+msgid "Channel %2d: Note On event : %5d\n"
+msgstr "Canal %2d: évènement Note On : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:530
+#, c-format
+msgid "Channel %2d: Note Off event: %5d\n"
+msgstr "Canal %2d: évènement Note Off : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:585
+#, c-format
+msgid "disconnected\n"
+msgstr "déconnecté\n"
+
+#: speaker-test/speaker-test.c:116
+msgid "Front Left"
+msgstr "Avant Gauche"
+
+#: speaker-test/speaker-test.c:117
+msgid "Front Right"
+msgstr "Avant Droit"
+
+#: speaker-test/speaker-test.c:118
+msgid "Rear Left"
+msgstr "Arrière Gauche"
+
+#: speaker-test/speaker-test.c:119
+msgid "Rear Right"
+msgstr "Arrière Droit"
+
+#: speaker-test/speaker-test.c:121
+msgid "LFE"
+msgstr ""
+
+#: speaker-test/speaker-test.c:122
+msgid "Side Left"
+msgstr "Côté Gauche"
+
+#: speaker-test/speaker-test.c:123
+msgid "Side Right"
+msgstr "Côté Droit"
+
+#: speaker-test/speaker-test.c:124
+msgid "Channel 9"
+msgstr "Canal 9"
+
+#: speaker-test/speaker-test.c:125
+msgid "Channel 10"
+msgstr "Canal 10"
+
+#: speaker-test/speaker-test.c:126
+msgid "Channel 11"
+msgstr "Canal 11"
+
+#: speaker-test/speaker-test.c:127
+msgid "Channel 12"
+msgstr "Canal 12"
+
+#: speaker-test/speaker-test.c:128
+msgid "Channel 13"
+msgstr "Canal 13"
+
+#: speaker-test/speaker-test.c:129
+msgid "Channel 14"
+msgstr "Canal 14"
+
+#: speaker-test/speaker-test.c:130
+msgid "Channel 15"
+msgstr "Canal 15"
+
+#: speaker-test/speaker-test.c:131
+msgid "Channel 16"
+msgstr "Canal 16"
+
+#: speaker-test/speaker-test.c:454
+#, c-format
+msgid "Broken configuration for playback: no configurations available: %s\n"
+msgstr "Configuration erronée pour la lecture: pas de configuration: %s\n"
+
+#: speaker-test/speaker-test.c:461
+#, c-format
+msgid "Access type not available for playback: %s\n"
+msgstr "Le type d'accès est indisponible à la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:468
+#, c-format
+msgid "Sample format not available for playback: %s\n"
+msgstr "Le format d'échantillonage est indisponible à la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:475
+#, c-format
+msgid "Channels count (%i) not available for playbacks: %s\n"
+msgstr "Le nombre (%i) de canaux est indisponible à la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:483
+#, c-format
+msgid "Rate %iHz not available for playback: %s\n"
+msgstr "La fréquence %iHz est indisponible à la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:488
+#, c-format
+msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
+msgstr ""
+"La fréquence ne correspond pas (demandée: %iHz, obtenue %iHz, err %d)\n"
+
+#: speaker-test/speaker-test.c:492
+#, c-format
+msgid "Rate set to %iHz (requested %iHz)\n"
+msgstr "La fréquence est %iHz (demandée %iHz)\n"
+
+#: speaker-test/speaker-test.c:498
+#, c-format
+msgid "Buffer size range from %lu to %lu\n"
+msgstr "L'intervalle de la taille du tampon est de %lu à %lu\n"
+
+#: speaker-test/speaker-test.c:499
+#, c-format
+msgid "Period size range from %lu to %lu\n"
+msgstr "L'intervalle de la taille de la période est de %lu à %lu\n"
+
+#: speaker-test/speaker-test.c:501
+#, c-format
+msgid "Requested period time %u us\n"
+msgstr "Temps de période demandé %u µs\n"
+
+#: speaker-test/speaker-test.c:504
+#, c-format
+msgid "Unable to set period time %u us for playback: %s\n"
+msgstr "Le temps de période %u µs n'a pas pu être défini pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:510
+#, c-format
+msgid "Requested buffer time %u us\n"
+msgstr "Temps tampon demandé %u µs\n"
+
+#: speaker-test/speaker-test.c:513
+#, c-format
+msgid "Unable to set buffer time %u us for playback: %s\n"
+msgstr "Le temps tampon de %u µs n'a pas pu être définie pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:522
+#, c-format
+msgid "Using max buffer size %lu\n"
+msgstr "Taille max. de tampon %lu utilisée\n"
+
+#: speaker-test/speaker-test.c:525
+#, c-format
+msgid "Unable to set buffer size %lu for playback: %s\n"
+msgstr "La taile de tampon %lu n'a pas pu être définie pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:531
+#, c-format
+msgid "Periods = %u\n"
+msgstr "Périodes = %u\n"
+
+#: speaker-test/speaker-test.c:534
+#, c-format
+msgid "Unable to set nperiods %u for playback: %s\n"
+msgstr "nperiods %u n'a pas pu être défini pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:543
+#, c-format
+msgid "Unable to set hw params for playback: %s\n"
+msgstr ""
+"Les paramètres matériel n'ont pas pu être définis pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:549
+#, c-format
+msgid "was set period_size = %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:550
+#, c-format
+msgid "was set buffer_size = %lu\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:552
+#, c-format
+msgid "buffer to small, could not use\n"
+msgstr "tampon trop petit, il n'a pas pu être utilisé\n"
+
+#: speaker-test/speaker-test.c:565
+#, c-format
+msgid "Unable to determine current swparams for playback: %s\n"
+msgstr ""
+"Les paramètres logiciels actuels n'ont pas pu être déterminés pour la "
+"lecture: %s\n"
+
+#: speaker-test/speaker-test.c:572
+#, c-format
+msgid "Unable to set start threshold mode for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:579
+#, c-format
+msgid "Unable to set avail min for playback: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:586
+#, c-format
+msgid "Unable to set sw params for playback: %s\n"
+msgstr ""
+"Les paramètres logiciel n'ont pas pu être définis pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:606
+#, fuzzy, c-format
+msgid "Unable to set channel map: %s\n"
+msgstr ""
+"Les paramètres matériel n'ont pas pu être définis pour la lecture: %s\n"
+
+#: speaker-test/speaker-test.c:626
+#, c-format
+msgid "Can't recovery from underrun, prepare failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:637
+#, c-format
+msgid "Can't recovery from suspend, prepare failed: %s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#, c-format
+msgid "No enough memory\n"
+msgstr "Pas assez de mémoire\n"
+
+#: speaker-test/speaker-test.c:706
+#, c-format
+msgid "Cannot open WAV file %s\n"
+msgstr "Le fichier WAV %s n'a pas pu être ouvert\n"
+
+#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#, c-format
+msgid "Invalid WAV file %s\n"
+msgstr "Fichier WAV incorrect %s\n"
+
+#: speaker-test/speaker-test.c:715
+#, c-format
+msgid "Not a WAV file: %s\n"
+msgstr "Le fichier %s n'est pas au format WAV\n"
+
+#: speaker-test/speaker-test.c:719
+#, c-format
+msgid "Unsupported WAV format %d for %s\n"
+msgstr "Format WAV %d non supporté pour %s\n"
+
+#: speaker-test/speaker-test.c:724
+#, c-format
+msgid "%s is not a mono stream (%d channels)\n"
+msgstr "%s n'est pas un flux en mono (%d canaux)\n"
+
+#: speaker-test/speaker-test.c:729
+#, c-format
+msgid "Sample rate doesn't match (%d) for %s\n"
+msgstr "La fréquence d'échantillonage (%d) ne correspond pas à %s\n"
+
+#: speaker-test/speaker-test.c:734
+#, c-format
+msgid "Unsupported sample format bits %d for %s\n"
+msgstr "Le format d'échantillonage %d bits n'est pas supporté pour %s\n"
+
+#: speaker-test/speaker-test.c:795
+#, c-format
+msgid "Undefined channel %d\n"
+msgstr "Canal non-défini %d\n"
+
+#: speaker-test/speaker-test.c:846
+#, c-format
+msgid "Write error: %d,%s\n"
+msgstr "Erreur en écriture: %d,%s\n"
+
+#: speaker-test/speaker-test.c:848
+#, c-format
+msgid "xrun_recovery failed: %d,%s\n"
+msgstr ""
+
+#: speaker-test/speaker-test.c:934
+#, fuzzy, c-format
+msgid ""
+"Usage: speaker-test [OPTION]... \n"
+"-h,--help\thelp\n"
+"-D,--device\tplayback device\n"
+"-r,--rate\tstream rate in Hz\n"
+"-c,--channels\tcount of channels in stream\n"
+"-f,--frequency\tsine wave frequency in Hz\n"
+"-F,--format\tsample format\n"
+"-b,--buffer\tring buffer size in us\n"
+"-p,--period\tperiod size in us\n"
+"-P,--nperiods\tnumber of periods\n"
+"-t,--test\tpink=use pink noise, sine=use sine wave, wav=WAV file\n"
+"-l,--nloops\tspecify number of loops to test, 0 = infinite\n"
+"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
+"-w,--wavfile\tUse the given WAV file as a test sound\n"
+"-W,--wavdir\tSpecify the directory containing WAV files\n"
+"-m,--chmap\tSpecify the channel map to override\n"
+"\n"
+msgstr ""
+"Utilisation: speaker-test [OPTION]...\n"
+"-h,--help\taide\n"
+"-D,--device\tpériphérique de lecture\n"
+"-r,--rate\tfréquence du flux en Hz\n"
+"-c,--channels\tnombre de canaux du flux\n"
+"-f,--frequency\tfréquence courbe sinus en Hz\n"
+"-F,--format\tformat d'échantillonage\n"
+"-b,--buffer\ttaille en µs du tampon circulaire\n"
+"-p,--period\ttaille de la période en µs\n"
+"-P,--nperiods\tnombre de périodes\n"
+"-t,--test\tpink=pink noise, sine=courbe sinus, wav=fichier WAV\n"
+"-l,--nloops\tspécifier le nombre de motifs à tester, 0 = infini\n"
+"-s,--speaker\ttest sur une seule enceinte.\n"
+"\t\tValeurs 1=Gauche, 2=Droite, et c.\n"
+"-w,--wavfile\tUtiliser le fichier WAV spécifié pour le test\n"
+"-w,--wavdir\tSpécifier le répertoire contenant les fichiers WAV\n"
+"\n"
+
+#: speaker-test/speaker-test.c:1063
+#, c-format
+msgid "Invalid number of periods %d\n"
+msgstr "Nombre de périodes %d incorrect\n"
+
+#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#, c-format
+msgid "Invalid test type %s\n"
+msgstr "Type de test %s incorrect\n"
+
+#: speaker-test/speaker-test.c:1095
+#, c-format
+msgid "Invalid parameter for -s option.\n"
+msgstr "Paramètre incorrect pour l'option -s.\n"
+
+#: speaker-test/speaker-test.c:1114
+#, c-format
+msgid "Unknown option '%c'\n"
+msgstr "Option '%c' inconnue\n"
+
+#: speaker-test/speaker-test.c:1128
+#, c-format
+msgid "Playback device is %s\n"
+msgstr "Le périphérique de lecture est %s\n"
+
+#: speaker-test/speaker-test.c:1129
+#, c-format
+msgid "Stream parameters are %iHz, %s, %i channels\n"
+msgstr "Les paramètres du flux sont %iHz, %s, %i canaux\n"
+
+#: speaker-test/speaker-test.c:1132
+#, c-format
+msgid "Using 16 octaves of pink noise\n"
+msgstr "Utilisation de 16 octaves de 'pink noise'\n"
+
+#: speaker-test/speaker-test.c:1135
+#, c-format
+msgid "Sine wave rate is %.4fHz\n"
+msgstr "La fréquence de la courbe sinus est %.4fHz\n"
+
+#: speaker-test/speaker-test.c:1138
+#, c-format
+msgid "WAV file(s)\n"
+msgstr "fichier(s) WAV\n"
+
+#: speaker-test/speaker-test.c:1148
+#, c-format
+msgid "Playback open error: %d,%s\n"
+msgstr "Erreur d'ouverture à la lecture: %d,%s\n"
+
+#: speaker-test/speaker-test.c:1154
+#, c-format
+msgid "Setting of hwparams failed: %s\n"
+msgstr "Échec de la configuration des paramètres matériel: %s\n"
+
+#: speaker-test/speaker-test.c:1158
+#, c-format
+msgid "Setting of swparams failed: %s\n"
+msgstr "Échec de la configuration des paramètres logiciel: %s\n"
+
+#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#, c-format
+msgid "Transfer failed: %s\n"
+msgstr "Échec du transfer: %s\n"
+
+#: speaker-test/speaker-test.c:1213
+#, c-format
+msgid "Time per period = %lf\n"
+msgstr "Temps par période = %lf\n"
+
+#~ msgid "Warning: format is changed to S16_LE\n"
+#~ msgstr "Avertissement: le format est changé en S16_LE\n"
+
+#~ msgid "Warning: format is changed to S24_3LE\n"
+#~ msgstr "Avertissement: le format est changé en S24_3LE\n"
+
+#~ msgid "Warning: format is changed to S24_LE\n"
+#~ msgstr "Avertissement: le format est changé en S24_LE\n"
diff --git a/po/insert-header.sin b/po/insert-header.sin
new file mode 100644
index 0000000..b26de01
--- /dev/null
+++ b/po/insert-header.sin
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/ja.gmo b/po/ja.gmo
new file mode 100644
index 0000000..d62f2af
--- /dev/null
+++ b/po/ja.gmo
Binary files differ
diff --git a/po/ja.po b/po/ja.po
new file mode 100644
index 0000000..3c81448
--- /dev/null
+++ b/po/ja.po
@@ -0,0 +1,1602 @@
+# Japanese translations for alsa-utils package
+# alsa-utils パッケージに対する英訳.
+# Copyright (C) 2005 Free Software Foundation, Inc.
+# This file is distributed under the same license as the alsa-utils package.
+# Takashi Iwai <tiwai@suse.de>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: alsa-utils 1.0.9a\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"PO-Revision-Date: 2009-05-27 15:08+0200\n"
+"Last-Translator: Takashi Iwai <tiwai@suse.de>\n"
+"Language-Team: Japanese\n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: alsamixer/card_select.c:126 alsamixer/device_name.c:126
+msgid "Sound Card"
+msgstr "サウンドカード"
+
+#: alsamixer/card_select.c:181
+msgid "(default)"
+msgstr "(デフォルト)"
+
+#: alsamixer/card_select.c:191
+msgid "cannot enumerate sound cards"
+msgstr "サウンドカードを検出できません"
+
+#: alsamixer/card_select.c:215
+msgid "enter device name..."
+msgstr "デバイス名入力..."
+
+#: alsamixer/cli.c:40
+msgid "Usage: alsamixer [options]"
+msgstr "使用法: alsamixer [オプション]"
+
+#: alsamixer/cli.c:41
+msgid ""
+"Useful options:\n"
+" -h, --help this help\n"
+" -c, --card=NUMBER sound card number or id\n"
+" -D, --device=NAME mixer device name\n"
+" -V, --view=MODE starting view mode: playback/capture/all"
+msgstr ""
+"主なオプション:\n"
+" -h, --help このヘルプ画面\n"
+" -c, --card=番号 サウンドカード番号またはID\n"
+" -D, --device=名前 ミキサーデバイス名\n"
+" -V, --view=表示モード 開始時の表示モード: playback/capture/all"
+
+#: alsamixer/cli.c:46
+msgid ""
+"Debugging options:\n"
+" -g, --no-color toggle using of colors\n"
+" -a, --abstraction=NAME mixer abstraction level: none/basic"
+msgstr ""
+"デバッグオプション:\n"
+" -g, --no-color カラー/モノクロ表示\n"
+" -a, --abstraction=名前 ミキサー抽象レベル: none/basic"
+
+#: alsamixer/cli.c:77
+#, c-format
+msgid "invalid card index: %s\n"
+msgstr "不正なカード番号: %s\n"
+
+#: alsamixer/cli.c:103
+#, c-format
+msgid "unknown abstraction level: %s\n"
+msgstr "未知の抽象レベル: %s\n"
+
+#: alsamixer/cli.c:108
+#, c-format
+msgid "unknown option: %c\n"
+msgstr "未知のオプション '%c'\n"
+
+#: alsamixer/cli.c:110
+msgid "try `alsamixer --help' for more information\n"
+msgstr "より詳しい情報は「alsamixer --help」を実行してください\n"
+
+#: alsamixer/device_name.c:177
+msgid "Device name:"
+msgstr "デバイス名:"
+
+#: alsamixer/die.c:37
+#, c-format
+msgid "%s: %s\n"
+msgstr ""
+
+#: alsamixer/mixer_display.c:98
+msgid "Card:"
+msgstr "カード:"
+
+#: alsamixer/mixer_display.c:99
+msgid "Chip:"
+msgstr "チップ:"
+
+#: alsamixer/mixer_display.c:100
+msgid "View:"
+msgstr "表示:"
+
+#: alsamixer/mixer_display.c:101
+msgid "Item:"
+msgstr "項目:"
+
+#: alsamixer/mixer_display.c:104
+msgid "F1: Help"
+msgstr "F1: ヘルプ"
+
+#: alsamixer/mixer_display.c:105
+msgid "F2: System information"
+msgstr "F2: システム情報"
+
+#: alsamixer/mixer_display.c:106
+msgid "F6: Select sound card"
+msgstr "F6: サウンドカード選択"
+
+#: alsamixer/mixer_display.c:107
+msgid "Esc: Exit"
+msgstr "Esc: 終了"
+
+#: alsamixer/mixer_display.c:174
+msgid "(unplugged)"
+msgstr ""
+
+#: alsamixer/mixer_display.c:192
+msgid "Playback"
+msgstr "再生"
+
+#: alsamixer/mixer_display.c:193
+msgid "Capture"
+msgstr "録音"
+
+#: alsamixer/mixer_display.c:194
+msgid "All"
+msgstr "全て"
+
+#: alsamixer/mixer_display.c:234
+msgid "mute"
+msgstr "ミュート"
+
+#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+msgid "dB gain:"
+msgstr "dBゲイン:"
+
+#: alsamixer/mixer_display.c:285
+#, c-format
+msgid " [%s %s, %s]"
+msgstr ""
+
+#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
+#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+msgid "Off"
+msgstr "オフ"
+
+#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+msgid "On"
+msgstr "オン"
+
+#: alsamixer/mixer_display.c:363
+msgid "The sound device was unplugged."
+msgstr "デバイスが接続されていません"
+
+#: alsamixer/mixer_display.c:364
+msgid "Press F6 to select another sound card."
+msgstr "他のカードを選択するにはF6を押して下さい"
+
+#: alsamixer/mixer_display.c:379
+msgid "This sound device does not have any playback controls."
+msgstr "このカードには再生ミキサーがありません"
+
+#: alsamixer/mixer_display.c:381
+msgid "This sound device does not have any capture controls."
+msgstr "このカードには録音ミキサーがありません"
+
+#: alsamixer/mixer_display.c:383
+msgid "This sound device does not have any controls."
+msgstr "このカードには制御可能なミキサーがありません"
+
+#. TRANSLATORS: playback on; one character
+#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+msgid "O"
+msgstr ""
+
+#. TRANSLATORS: playback muted; one character
+#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+msgid "M"
+msgstr ""
+
+#. TRANSLATORS: "left"; no more than two characters
+#: alsamixer/mixer_display.c:536
+msgid "L"
+msgstr ""
+
+#. TRANSLATORS: "right"; no more than two characters
+#: alsamixer/mixer_display.c:540
+msgid "R"
+msgstr ""
+
+#. TRANSLATORS: no more than eight characters
+#: alsamixer/mixer_display.c:542
+msgid "CAPTURE"
+msgstr "録音"
+
+#: alsamixer/mixer_display.c:592
+msgid "Front"
+msgstr "フロント"
+
+#: alsamixer/mixer_display.c:595
+msgid "Rear"
+msgstr "リア"
+
+#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+msgid "Center"
+msgstr "センター"
+
+#: alsamixer/mixer_display.c:601
+msgid "Woofer"
+msgstr "低音"
+
+#: alsamixer/mixer_display.c:604
+msgid "Side"
+msgstr "サイド"
+
+#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+msgid "cannot open mixer"
+msgstr "ミキサーを開けません"
+
+#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+msgid "cannot load mixer controls"
+msgstr "ミキサーをロードできません"
+
+#: alsamixer/mixer_widget.c:169
+#, c-format
+msgid "Cannot open mixer device '%s'."
+msgstr "ミキサーデバイス'%s'を開けません"
+
+#: alsamixer/mixer_widget.c:190
+msgid "Esc Exit"
+msgstr "Esc 終了"
+
+#: alsamixer/mixer_widget.c:191
+msgid "F1 ? H Help"
+msgstr "F1 ? H ヘルプ"
+
+#: alsamixer/mixer_widget.c:192
+msgid "F2 / System information"
+msgstr "F2 / システム情報"
+
+#: alsamixer/mixer_widget.c:193
+msgid "F3 Show playback controls"
+msgstr "F3 再生ミキサー表示"
+
+#: alsamixer/mixer_widget.c:194
+msgid "F4 Show capture controls"
+msgstr "F4 録音ミキサー表示"
+
+#: alsamixer/mixer_widget.c:195
+msgid "F5 Show all controls"
+msgstr "F5 全て表示"
+
+#: alsamixer/mixer_widget.c:196
+msgid "Tab Toggle view mode (F3/F4/F5)"
+msgstr "Tab 表示モード変更 (F3/F4/F5)"
+
+#: alsamixer/mixer_widget.c:197
+msgid "F6 S Select sound card"
+msgstr "F5 S サウンドカード選択"
+
+#: alsamixer/mixer_widget.c:198
+msgid "L Redraw screen"
+msgstr "L 画面再描画"
+
+#: alsamixer/mixer_widget.c:200
+msgid "Left Move to the previous control"
+msgstr "← 前の項目に移る"
+
+#: alsamixer/mixer_widget.c:201
+msgid "Right Move to the next control"
+msgstr "→ 次の項目に移る"
+
+# ↑
+#: alsamixer/mixer_widget.c:203
+msgid "Up/Down Change volume"
+msgstr "↑/↓ 音量変更"
+
+#: alsamixer/mixer_widget.c:204
+msgid "+ - Change volume"
+msgstr "+ - 音量変更"
+
+#: alsamixer/mixer_widget.c:205
+msgid "Page Up/Dn Change volume in big steps"
+msgstr "Page Up/dn 音量変更"
+
+#: alsamixer/mixer_widget.c:206
+msgid "End Set volume to 0%"
+msgstr "End 音量 0%"
+
+#: alsamixer/mixer_widget.c:207
+msgid "0-9 Set volume to 0%-90%"
+msgstr "0-9 音量 0%-90%"
+
+#: alsamixer/mixer_widget.c:208
+msgid "Q W E Increase left/both/right volumes"
+msgstr "Q W E 左/両/右音量アップ"
+
+#. TRANSLATORS: or Y instead of Z
+#: alsamixer/mixer_widget.c:210
+msgid "Z X C Decrease left/both/right volumes"
+msgstr "Z X C 左/両/右音量ダウン"
+
+#: alsamixer/mixer_widget.c:211
+msgid "B Balance left and right volumes"
+msgstr "B 左右音量を平均化する"
+
+#: alsamixer/mixer_widget.c:213
+msgid "M Toggle mute"
+msgstr "M ミュートをトグル"
+
+#. TRANSLATORS: or , .
+#: alsamixer/mixer_widget.c:215
+msgid "< > Toggle left/right mute"
+msgstr "< > 左/右ミュートをトグル"
+
+#: alsamixer/mixer_widget.c:217
+msgid "Space Toggle capture"
+msgstr "スペース 録音をトグル"
+
+#. TRANSLATORS: or Insert Delete
+#: alsamixer/mixer_widget.c:219
+msgid "; ' Toggle left/right capture"
+msgstr "; ' 左/右録音をトグル"
+
+#: alsamixer/mixer_widget.c:221
+msgid "Authors:"
+msgstr "作者:"
+
+#: alsamixer/mixer_widget.c:222
+msgid " Tim Janik"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:223
+msgid " Jaroslav Kysela <perex@perex.cz>"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:224
+msgid " Clemens Ladisch <clemens@ladisch.de>"
+msgstr ""
+
+#: alsamixer/mixer_widget.c:226
+msgid "Help"
+msgstr "ヘルプ"
+
+#: alsamixer/proc_files.c:103
+msgid "Select File"
+msgstr "ファイル選択"
+
+#: alsamixer/textbox.c:52 alsamixer/textbox.c:66
+msgid "Error"
+msgstr "エラー"
+
+#: alsamixer/textbox.c:80
+#, c-format
+msgid "Cannot open file \"%s\"."
+msgstr "\"%s\"をオープンできません"
+
+#: aplay/aplay.c:175
+msgid "raw data"
+msgstr "raw データ"
+
+#: aplay/aplay.c:176
+msgid "VOC"
+msgstr "VOC"
+
+#: aplay/aplay.c:178
+msgid "WAVE"
+msgstr "WAVE"
+
+#: aplay/aplay.c:179
+msgid "Sparc Audio"
+msgstr "Sparc オーディオ"
+
+#: aplay/aplay.c:200
+#, fuzzy, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"\n"
+"-h, --help help\n"
+" --version print current version\n"
+"-l, --list-devices list all soundcards and digital audio devices\n"
+"-L, --list-pcms list device names\n"
+"-D, --device=NAME select PCM by name\n"
+"-q, --quiet quiet mode\n"
+"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
+"-c, --channels=# channels\n"
+"-f, --format=FORMAT sample format (case insensitive)\n"
+"-r, --rate=# sample rate\n"
+"-d, --duration=# interrupt after # seconds\n"
+"-M, --mmap mmap stream\n"
+"-N, --nonblock nonblocking mode\n"
+"-F, --period-time=# distance between interrupts is # microseconds\n"
+"-B, --buffer-time=# buffer duration is # microseconds\n"
+" --period-size=# distance between interrupts is # frames\n"
+" --buffer-size=# buffer duration is # frames\n"
+"-A, --avail-min=# min available space for wakeup is # microseconds\n"
+"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
+" (relative to buffer size if <= 0)\n"
+"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from "
+"xrun\n"
+"-v, --verbose show PCM structure and setup (accumulative)\n"
+"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
+"-I, --separate-channels one file for each channel\n"
+"-i, --interactive allow interactive operation from stdin\n"
+"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
+" --disable-resample disable automatic rate resample\n"
+" --disable-channels disable automatic channel conversions\n"
+" --disable-format disable automatic format conversions\n"
+" --disable-softvol disable software volume control (softvol)\n"
+" --test-position test ring buffer position\n"
+" --test-coef=# test coefficient for ring buffer position (default "
+"8)\n"
+" expression for validation is: coef * (buffer_size / "
+"2)\n"
+" --test-nowait do not wait for ring buffer - eats whole CPU\n"
+" --max-file-time=# start another output file when the old file has "
+"recorded\n"
+" for this many seconds\n"
+" --process-id-file write the process ID here\n"
+" --use-strftime apply the strftime facility to the output file name\n"
+" --dump-hw-params dump hw_params of the device\n"
+" --fatal-errors treat all errors as fatal\n"
+msgstr ""
+"使用法: %s [オプション]... [ファイル]...\n"
+"\n"
+"-h, --help ヘルプ\n"
+" --version 現在のバージョンを表示\n"
+"-l, --list-devices 全てのサウンドカードとオーディオデバイスを表示\n"
+"-L, --list-pcms 全ての定義された PCM を表示\n"
+"-D, --device=NAME 使用する PCM を指定\n"
+"-q, --quiet quiet モード\n"
+"-t, --file-type TYPE ファイルタイプ (voc, wav, raw または au)\n"
+"-c, --channels=# チャネル数\n"
+"-f, --format=FORMAT サンプルフォーマット (大／小文字区別)\n"
+"-r, --rate=# サンプルレート\n"
+"-d, --duration=# 指定の秒数後に終了\n"
+"-M, --mmap mmap ストリーム\n"
+"-N, --nonblock 非ブロックモード\n"
+"-F, --period-time=# 割り込み間隔をμ秒で指定\n"
+"-B, --buffer-time=# バッファの大きさをμ秒で指定\n"
+" --period-size=# 割り込み間隔をフレーム数で指定\n"
+" --buffer-size=# バッファの大きさをフレーム数で指定\n"
+"-A, --avail-min=# wakeup の最少スペースをμ秒で指定\n"
+"-R, --start-delay=# 指定のμ秒後に PCM を自動スタート\n"
+" (0 以下の場合はバッファサイズより)\n"
+"-T, --stop-delay=# XRUN から指定のμ秒後に PCM の自動停止\n"
+"-v, --verbose PCM の設定を表示 (複数指定可能)\n"
+"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
+"-I, --separate-channels 各チャネルに一つのファイルを用いる\n"
+" --disable-resample 自動レート変換を禁止する\n"
+" --disable-channels 自動チャネル変換を禁止する\n"
+" --disable-format 自動フォーマット変換を禁止する\n"
+" --disable-softvol ソフト音量制御(softvol)を禁止する\n"
+" --test-position リングバッファ位置をテストする\n"
+" --test-coef=# リングバッファ位置テストの係数 (デフォルト 8)\n"
+" テスト範囲: coef * (buffer_size / 2)\n"
+" --test-nowait リングバッファのウエイトを禁止 - 注意:高CPU負荷\n"
+
+#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#, c-format
+msgid "Recognized sample formats are:"
+msgstr "認識されるサンプルフォーマット:"
+
+#: aplay/aplay.c:250
+#, c-format
+msgid ""
+"\n"
+"Some of these may not be available on selected hardware\n"
+msgstr ""
+"\n"
+"これらのいくつかは指定のハードウェアで使用不可能な場合があります\n"
+
+#: aplay/aplay.c:251
+#, fuzzy, c-format
+msgid "The available format shortcuts are:\n"
+msgstr "可能なフォーマットの省略形:\n"
+
+#: aplay/aplay.c:252
+#, c-format
+msgid "-f cd (16 bit little endian, 44100, stereo)\n"
+msgstr "-f cd (16 ビット、リトルエンディアン、44100、ステレオ)\n"
+
+#: aplay/aplay.c:253
+#, c-format
+msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
+msgstr "-f cdr (16 ビット、ビッグエンディアン、44100、ステレオ)\n"
+
+#: aplay/aplay.c:254
+#, c-format
+msgid "-f dat (16 bit little endian, 48000, stereo)\n"
+msgstr "-f dat (16 ビット、リトルエンディアン、48000、ステレオ)\n"
+
+#: aplay/aplay.c:268
+msgid "no soundcards found..."
+msgstr "サウンドカードが見つかりません..."
+
+#: aplay/aplay.c:271
+#, c-format
+msgid "**** List of %s Hardware Devices ****\n"
+msgstr "**** ハードウェアデバイス %s のリスト ****\n"
+
+#: aplay/aplay.c:300
+#, c-format
+msgid "card %i: %s [%s], device %i: %s [%s]\n"
+msgstr "カード %i: %s [%s], デバイス %i: %s [%s]\n"
+
+#: aplay/aplay.c:306
+#, c-format
+msgid " Subdevices: %i/%i\n"
+msgstr " サブデバイス: %i/%i\n"
+
+#: aplay/aplay.c:313
+#, c-format
+msgid " Subdevice #%i: %s\n"
+msgstr " サブデバイス #%i: %s\n"
+
+#: aplay/aplay.c:394
+#, c-format
+msgid "Aborted by signal %s...\n"
+msgstr "シグナル %s で中断...\n"
+
+#: aplay/aplay.c:512
+msgid "command should be named either arecord or aplay"
+msgstr "arecord または aplay コマンドのみ可能"
+
+#: aplay/aplay.c:556
+#, c-format
+msgid "unrecognized file format %s"
+msgstr "不正なファイルフォーマット %s"
+
+#: aplay/aplay.c:563
+#, c-format
+msgid "value %i for channels is invalid"
+msgstr "不正なチャネル数 %i"
+
+#: aplay/aplay.c:582
+#, c-format
+msgid "wrong extended format '%s'"
+msgstr "不正な拡張フォーマット '%s'"
+
+#: aplay/aplay.c:593
+#, c-format
+msgid "bad speed value %i"
+msgstr "不正なレート値 %i"
+
+#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
+#, fuzzy, c-format
+msgid "Unable to parse channel map string: %s\n"
+msgstr "avail_min を設定できません: %s\n"
+
+#: aplay/aplay.c:706
+#, c-format
+msgid "Try `%s --help' for more information.\n"
+msgstr "より詳しい情報は「%s --help」を実行してください\n"
+
+#: aplay/aplay.c:722
+#, c-format
+msgid "audio open error: %s"
+msgstr ""
+
+#: aplay/aplay.c:727
+#, c-format
+msgid "info error: %s"
+msgstr ""
+
+#: aplay/aplay.c:734
+#, c-format
+msgid "nonblock setting error: %s"
+msgstr ""
+
+#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
+#: aplay/aplay.c:1867 aplay/aplay.c:1897
+msgid "not enough memory"
+msgstr "メモリが足りません"
+
+#: aplay/aplay.c:768
+#, fuzzy, c-format
+msgid "Cannot create process ID file %s: %s"
+msgstr "WAVファイルがオープンできません: %s\n"
+
+#: aplay/aplay.c:858
+#, c-format
+msgid "read error (called from line %i)"
+msgstr "リードエラー (%i 行)"
+
+#: aplay/aplay.c:925
+#, c-format
+msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+
+#: aplay/aplay.c:936
+#, c-format
+msgid ""
+"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+
+#: aplay/aplay.c:941
+msgid "wrong format tag in extensible 'fmt ' chunk"
+msgstr ""
+
+#: aplay/aplay.c:948
+#, c-format
+msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
+msgstr ""
+
+#: aplay/aplay.c:953
+#, c-format
+msgid "can't play WAVE-files with %d tracks"
+msgstr "%d トラックを含む WAVE ファイルは再生できません"
+
+#: aplay/aplay.c:961 aplay/aplay.c:1087
+#, c-format
+msgid "Warning: format is changed to U8\n"
+msgstr "警告: フォーマットは U8 に変更されます\n"
+
+#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
+#, fuzzy, c-format
+msgid "Warning: format is changed to %s\n"
+msgstr "警告: フォーマットは U8 に変更されます\n"
+
+#: aplay/aplay.c:1000
+#, c-format
+msgid ""
+" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
+msgstr ""
+"%2$d バイト長 %1$d サンプルビット (%3$d チャネル) の WAVE ファイルは再生でき"
+"ません"
+
+#: aplay/aplay.c:1023
+#, c-format
+msgid " can't play WAVE-files with sample %d bits wide"
+msgstr "%d ビット長のサンプルの WAVE ファイルは再生できません"
+
+#: aplay/aplay.c:1081
+#, c-format
+msgid "Warning: format is changed to MU_LAW\n"
+msgstr "警告: フォーマットは MU_LAW に変更されます\n"
+
+#: aplay/aplay.c:1093
+#, c-format
+msgid "Warning: format is changed to S16_BE\n"
+msgstr "警告: フォーマットは S16_BE に変更されます\n"
+
+#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
+#: aplay/aplay.c:2727
+msgid "read error"
+msgstr "リードエラー"
+
+#: aplay/aplay.c:1136
+msgid "Channel numbers don't match between hw_params and channel map"
+msgstr ""
+
+#: aplay/aplay.c:1145
+#, c-format
+msgid "Warning: unable to get channel map\n"
+msgstr ""
+
+#: aplay/aplay.c:1178
+#, c-format
+msgid "Channel %d doesn't match with hw_parmas"
+msgstr ""
+
+#: aplay/aplay.c:1204
+msgid "Broken configuration for this PCM: no configurations available"
+msgstr "指定の PCM を使用できません: 設定がありません"
+
+#: aplay/aplay.c:1208
+#, c-format
+msgid "HW Params of device \"%s\":\n"
+msgstr ""
+
+#: aplay/aplay.c:1228
+msgid "Access type not available"
+msgstr "アクセスタイプが使用不可能"
+
+#: aplay/aplay.c:1233
+msgid "Sample format non available"
+msgstr "サンプルフォーマットが使用不可能"
+
+#: aplay/aplay.c:1239
+msgid "Channels count non available"
+msgstr "チャネル数が使用不可能"
+
+#: aplay/aplay.c:1254
+#, c-format
+msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
+msgstr "警告: レートが不正確です (要求値 = %iHz, 使用値 = %iHz)\n"
+
+#: aplay/aplay.c:1260
+#, c-format
+msgid " please, try the plug plugin %s\n"
+msgstr " plug プラグイン%s を使用してください\n"
+
+#: aplay/aplay.c:1297
+msgid "Unable to install hw params:"
+msgstr "hw params のインストールに失敗しました:"
+
+#: aplay/aplay.c:1304
+#, c-format
+msgid "Can't use period equal to buffer size (%lu == %lu)"
+msgstr "period と buffer サイズには同じ値を使用できません (%lu == %lu)"
+
+#: aplay/aplay.c:1335
+msgid "unable to install sw params:"
+msgstr "sw params のインストールに失敗しました:"
+
+#: aplay/aplay.c:1369
+#, c-format
+msgid "snd_pcm_mmap_begin problem: %s"
+msgstr ""
+
+#: aplay/aplay.c:1398
+#, c-format
+msgid "stdin O_NONBLOCK flag setup failed\n"
+msgstr ""
+
+#: aplay/aplay.c:1422
+#, c-format
+msgid "\rPAUSE command ignored (no hw support)\n"
+msgstr ""
+
+#: aplay/aplay.c:1427
+#, fuzzy, c-format
+msgid "pause push error: %s"
+msgstr "ステータスエラー: %s"
+
+#: aplay/aplay.c:1436
+#, fuzzy, c-format
+msgid "pause release error: %s"
+msgstr "サスペンド: prepare エラー: %s"
+
+#: aplay/aplay.c:1452
+#, c-format
+msgid ""
+"\r=== PAUSE === "
+msgstr ""
+
+#: aplay/aplay.c:1494
+#, c-format
+msgid "status error: %s"
+msgstr "ステータスエラー: %s"
+
+#: aplay/aplay.c:1499
+#, c-format
+msgid "fatal %s: %s"
+msgstr ""
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
+msgid "underrun"
+msgstr "アンダーラン"
+
+#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
+msgid "overrun"
+msgstr "オーバーラン"
+
+#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#, c-format
+msgid "%s!!! (at least %.3f ms long)\n"
+msgstr "%s!!! (少なくとも %.3f ms)\n"
+
+#: aplay/aplay.c:1526
+#, c-format
+msgid "Status:\n"
+msgstr "ステータス:\n"
+
+#: aplay/aplay.c:1530
+#, c-format
+msgid "xrun: prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1536
+#, c-format
+msgid "Status(DRAINING):\n"
+msgstr "ステータス(DRAINING):\n"
+
+#: aplay/aplay.c:1540
+#, c-format
+msgid "capture stream format change? attempting recover...\n"
+msgstr "録音ストリームのフォーマットが変更？ 修復を試みます...\n"
+
+#: aplay/aplay.c:1542
+#, c-format
+msgid "xrun(DRAINING): prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1549
+#, c-format
+msgid "Status(R/W):\n"
+msgstr "ステータス(R/W):\n"
+
+#: aplay/aplay.c:1552
+#, c-format
+msgid "read/write error, state = %s"
+msgstr "読み書きエラー, ステータス = %s"
+
+#: aplay/aplay.c:1562
+#, c-format
+msgid "Suspended. Trying resume. "
+msgstr "サスペンド中です。レジュームします。"
+
+#: aplay/aplay.c:1567
+#, c-format
+msgid "Failed. Restarting stream. "
+msgstr "失敗しました。ストリームを再スタートします。"
+
+#: aplay/aplay.c:1569
+#, c-format
+msgid "suspend: prepare error: %s"
+msgstr "サスペンド: prepare エラー: %s"
+
+#: aplay/aplay.c:1574
+#, c-format
+msgid "Done.\n"
+msgstr "終了\n"
+
+#: aplay/aplay.c:1596
+#, c-format
+msgid " !clip "
+msgstr ""
+
+#: aplay/aplay.c:1743
+#, c-format
+msgid "Unsupported bit size %d.\n"
+msgstr ""
+
+#: aplay/aplay.c:1777
+#, c-format
+msgid "Max peak (%li samples): 0x%08x "
+msgstr "最大ピーク (%li サンプル): 0x%08x "
+
+#: aplay/aplay.c:1811
+#, c-format
+msgid ""
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
+"%li\n"
+msgstr ""
+
+#: aplay/aplay.c:1939
+#, c-format
+msgid "write error: %s"
+msgstr "書込エラー: %s"
+
+#: aplay/aplay.c:1987
+#, c-format
+msgid "writev error: %s"
+msgstr "書込(writev)エラー: %s"
+
+#: aplay/aplay.c:2031
+#, c-format
+msgid "read error: %s"
+msgstr "読込エラー: %s"
+
+#: aplay/aplay.c:2075
+#, c-format
+msgid "readv error: %s"
+msgstr "読込(readv)エラー: %s"
+
+#: aplay/aplay.c:2123
+msgid "can't allocate buffer for silence"
+msgstr "サイレンス用のバッファの取得に失敗しました"
+
+#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
+#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
+#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+msgid "write error"
+msgstr "書込エラー"
+
+#: aplay/aplay.c:2145
+#, c-format
+msgid "voc_pcm_flush - silence error"
+msgstr ""
+
+#: aplay/aplay.c:2148
+msgid "voc_pcm_flush error"
+msgstr ""
+
+#: aplay/aplay.c:2173
+msgid "malloc error"
+msgstr "malloc エラー"
+
+#: aplay/aplay.c:2177
+#, c-format
+msgid "Playing Creative Labs Channel file '%s'...\n"
+msgstr "Creative Labs Channel ファイル '%s' を演奏中...\n"
+
+#: aplay/aplay.c:2245 aplay/aplay.c:2340
+msgid "can't play packed .voc files"
+msgstr "packed .voc ファイルは演奏できません"
+
+#: aplay/aplay.c:2300
+#, c-format
+msgid "can't play loops; %s isn't seekable\n"
+msgstr "ループ演奏できません。%s はシーク不可能です\n"
+
+#: aplay/aplay.c:2349
+#, c-format
+msgid "unknown blocktype %d. terminate."
+msgstr "未知のブロックタイプ %d: 終了します。"
+
+#: aplay/aplay.c:2480
+#, c-format
+msgid "Wave doesn't support %s format..."
+msgstr "WAVE は %s フォーマットをサポートしません..."
+
+#: aplay/aplay.c:2540
+#, c-format
+msgid "Sparc Audio doesn't support %s format..."
+msgstr "Sparc オーディオは %s フォーマットをサポートしません..."
+
+#: aplay/aplay.c:2621
+msgid "Playing"
+msgstr "再生中"
+
+#: aplay/aplay.c:2621
+msgid "Recording"
+msgstr "録音中"
+
+#: aplay/aplay.c:2625
+#, c-format
+msgid "Rate %d Hz, "
+msgstr "レート %d Hz, "
+
+#: aplay/aplay.c:2627
+#, c-format
+msgid "Mono"
+msgstr "モノラル"
+
+#: aplay/aplay.c:2629
+#, c-format
+msgid "Stereo"
+msgstr "ステレオ"
+
+#: aplay/aplay.c:2631
+#, c-format
+msgid "Channels %i"
+msgstr "チャネル数 %i"
+
+#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#, c-format
+msgid "You need to specify %d files"
+msgstr "%d 個のファイルを指定してください"
+
+#: seq/aconnect/aconnect.c:49
+#, c-format
+msgid "aconnect - ALSA sequencer connection manager\n"
+msgstr "aconnect - ALSA sequencer 接続マネージャ\n"
+
+#: seq/aconnect/aconnect.c:50
+#, c-format
+msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:51
+#, c-format
+msgid "Usage:\n"
+msgstr "使用法:\n"
+
+#: seq/aconnect/aconnect.c:52
+#, c-format
+msgid " * Connection/disconnection between two ports\n"
+msgstr " * 二つのポートの接続／切り離し\n"
+
+#: seq/aconnect/aconnect.c:53
+#, c-format
+msgid " aconnect [-options] sender receiver\n"
+msgstr " aconnect [-オプション] 送信 受信\n"
+
+#: seq/aconnect/aconnect.c:54
+#, c-format
+msgid " sender, receiver = client:port pair\n"
+msgstr " 送信, 受信 = クライアント:ポートの組\n"
+
+#: seq/aconnect/aconnect.c:55
+#, c-format
+msgid " -d,--disconnect disconnect\n"
+msgstr " -d,--disconnect 切り離し\n"
+
+#: seq/aconnect/aconnect.c:56
+#, c-format
+msgid " -e,--exclusive exclusive connection\n"
+msgstr " -e,--exclusive 排他接続\n"
+
+#: seq/aconnect/aconnect.c:57
+#, c-format
+msgid " -r,--real # convert real-time-stamp on queue\n"
+msgstr " -r,--real # キューのリアルタイムスタンプに変換\n"
+
+#: seq/aconnect/aconnect.c:58
+#, c-format
+msgid " -t,--tick # convert tick-time-stamp on queue\n"
+msgstr " -t,--tick # キューのティックタイムスタンプに変換\n"
+
+#: seq/aconnect/aconnect.c:59
+#, c-format
+msgid " * List connected ports (no subscription action)\n"
+msgstr " * 接続済みのポートの一覧\n"
+
+#: seq/aconnect/aconnect.c:60
+#, c-format
+msgid " aconnect -i|-o [-options]\n"
+msgstr " aconnect -i|-o [-オプション]\n"
+
+#: seq/aconnect/aconnect.c:61
+#, c-format
+msgid " -i,--input list input (readable) ports\n"
+msgstr " -i,--input 入力 (読込) ポートの一覧\n"
+
+#: seq/aconnect/aconnect.c:62
+#, c-format
+msgid " -o,--output list output (writable) ports\n"
+msgstr " -o,--output 主力 (書込) ポートの一覧\n"
+
+#: seq/aconnect/aconnect.c:63
+#, c-format
+msgid " -l,--list list current connections of each port\n"
+msgstr " -l,--list 各ポートの現在の接続を表示\n"
+
+#: seq/aconnect/aconnect.c:64
+#, c-format
+msgid " * Remove all exported connections\n"
+msgstr " * 全てのエクスポートされた接続を切り離す\n"
+
+#: seq/aconnect/aconnect.c:65
+#, c-format
+msgid " -x, --removeall\n"
+msgstr " -x, --removall\n"
+
+#: seq/aconnect/aconnect.c:132
+msgid "Connecting To"
+msgstr "接続先"
+
+#: seq/aconnect/aconnect.c:133
+msgid "Connected From"
+msgstr "接続元"
+
+#: seq/aconnect/aconnect.c:169
+#, c-format
+msgid "client %d: '%s' [type=%s]\n"
+msgstr "クライアント %d: '%s' [タイプ=%s]\n"
+
+#: seq/aconnect/aconnect.c:173
+msgid "user"
+msgstr "ユーザ"
+
+#: seq/aconnect/aconnect.c:173
+msgid "kernel"
+msgstr "カーネル"
+
+#: seq/aconnect/aconnect.c:307
+#, c-format
+msgid "can't open sequencer\n"
+msgstr "sequencer をオープンできません\n"
+
+#: seq/aconnect/aconnect.c:335
+#, c-format
+msgid "can't get client id\n"
+msgstr "クライアント ID を取得できません\n"
+
+#: seq/aconnect/aconnect.c:342
+#, c-format
+msgid "can't set client info\n"
+msgstr "クライアント情報を取得できません\n"
+
+#: seq/aconnect/aconnect.c:349
+#, c-format
+msgid "invalid sender address %s\n"
+msgstr "送信アドレスが不正です: %s\n"
+
+#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
+#, c-format
+msgid "invalid destination address %s\n"
+msgstr "受信アドレスが不正です: %s\n"
+
+#: seq/aconnect/aconnect.c:368
+#, c-format
+msgid "No subscription is found\n"
+msgstr "接続が見つかりません\n"
+
+#: seq/aconnect/aconnect.c:373
+#, c-format
+msgid "Disconnection failed (%s)\n"
+msgstr "切り離しに失敗 (%s)\n"
+
+#: seq/aconnect/aconnect.c:379
+#, c-format
+msgid "Connection is already subscribed\n"
+msgstr "既に接続されています\n"
+
+#: seq/aconnect/aconnect.c:384
+#, c-format
+msgid "Connection failed (%s)\n"
+msgstr "接続に失敗 (%s)\n"
+
+#: seq/aseqnet/aseqnet.c:164
+#, c-format
+msgid "aseqnet - network client/server on ALSA sequencer\n"
+msgstr "aseqnet - ALSA sequencer 上のネットワーククライアント／サーバ\n"
+
+#: seq/aseqnet/aseqnet.c:165
+#, c-format
+msgid " Copyright (C) 1999 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:166
+#, c-format
+msgid "usage:\n"
+msgstr "使用法:\n"
+
+#: seq/aseqnet/aseqnet.c:167
+#, c-format
+msgid " server mode: aseqnet [-options]\n"
+msgstr " サーバモード: aseqnet [-オプション]\n"
+
+#: seq/aseqnet/aseqnet.c:168
+#, c-format
+msgid " client mode: aseqnet [-options] server_host\n"
+msgstr " クライアントモード: aseqnet [-オプション] サーバホスト\n"
+
+#: seq/aseqnet/aseqnet.c:169
+#, c-format
+msgid "options:\n"
+msgstr "オプション:\n"
+
+#: seq/aseqnet/aseqnet.c:170
+#, fuzzy, c-format
+msgid " -p,--port # : specify TCP port (digit or service name)\n"
+msgstr " -p,--port # : TCP ポートの指定 (数字またはサービス名)\n"
+
+#: seq/aseqnet/aseqnet.c:171
+#, c-format
+msgid " -s,--source addr : read from given addr (client:port)\n"
+msgstr " -s,--source addr : 指定のアドレス(クライアント:ポート)から読み込む\n"
+
+#: seq/aseqnet/aseqnet.c:172
+#, c-format
+msgid " -d,--dest addr : write to given addr (client:port)\n"
+msgstr " -d,--dest addr : 指定のアドレス(クライアント:ポート)に書き込む\n"
+
+#: seq/aseqnet/aseqnet.c:173
+#, c-format
+msgid " -v, --verbose : print verbose messages\n"
+msgstr " -v,--verbose : 冗長メッセージ表示\n"
+
+#: seq/aseqnet/aseqnet.c:174
+#, c-format
+msgid " -i, --info : print certain received events\n"
+msgstr " -i,--info : 受信イベントを表示する\n"
+
+#: seq/aseqnet/aseqnet.c:188
+#, c-format
+msgid "can't malloc\n"
+msgstr "malloc できません\n"
+
+#: seq/aseqnet/aseqnet.c:213
+#, c-format
+msgid "closing files..\n"
+msgstr "ファイルを閉じます..\n"
+
+#: seq/aseqnet/aseqnet.c:272
+#, c-format
+msgid "sequencer opened: %d:%d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:279
+#, c-format
+msgid "invalid source address %s\n"
+msgstr "不正な送信アドレス %s\n"
+
+#: seq/aseqnet/aseqnet.c:309
+#, c-format
+msgid "service '%s' is not found in /etc/services\n"
+msgstr "サービス '%s' が /etc/services に見つかりません\n"
+
+#: seq/aseqnet/aseqnet.c:377
+#, c-format
+msgid "too many connections!\n"
+msgstr "接続が多すぎます!\n"
+
+#: seq/aseqnet/aseqnet.c:388
+#, c-format
+msgid "accepted[%d]\n"
+msgstr "了解[%d]\n"
+
+#: seq/aseqnet/aseqnet.c:411
+#, c-format
+msgid "can't get address %s\n"
+msgstr "アドレス %s を取得できません\n"
+
+#: seq/aseqnet/aseqnet.c:422
+#, c-format
+msgid "ok.. connected\n"
+msgstr "ok.. 接続\n"
+
+#: seq/aseqnet/aseqnet.c:518
+#, c-format
+msgid "Channel %2d: Control event : %5d\n"
+msgstr "チャネル %2d: コントロール : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:522
+#, c-format
+msgid "Channel %2d: Pitchbender : %5d\n"
+msgstr "チャネル %2d: ピッチベンド : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:526
+#, c-format
+msgid "Channel %2d: Note On event : %5d\n"
+msgstr "チャネル %2d: ノートオン : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:530
+#, c-format
+msgid "Channel %2d: Note Off event: %5d\n"
+msgstr "チャネル %2d: ノートオフ : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:585
+#, c-format
+msgid "disconnected\n"
+msgstr "切り離し\n"
+
+#: speaker-test/speaker-test.c:116
+msgid "Front Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:117
+msgid "Front Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:118
+msgid "Rear Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:119
+msgid "Rear Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:121
+msgid "LFE"
+msgstr ""
+
+#: speaker-test/speaker-test.c:122
+msgid "Side Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:123
+msgid "Side Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:124
+msgid "Channel 9"
+msgstr ""
+
+#: speaker-test/speaker-test.c:125
+msgid "Channel 10"
+msgstr ""
+
+#: speaker-test/speaker-test.c:126
+msgid "Channel 11"
+msgstr ""
+
+#: speaker-test/speaker-test.c:127
+msgid "Channel 12"
+msgstr ""
+
+#: speaker-test/speaker-test.c:128
+msgid "Channel 13"
+msgstr ""
+
+#: speaker-test/speaker-test.c:129
+msgid "Channel 14"
+msgstr ""
+
+#: speaker-test/speaker-test.c:130
+msgid "Channel 15"
+msgstr ""
+
+#: speaker-test/speaker-test.c:131
+msgid "Channel 16"
+msgstr ""
+
+#: speaker-test/speaker-test.c:454
+#, c-format
+msgid "Broken configuration for playback: no configurations available: %s\n"
+msgstr "再生用に設定できません: 設定がみつかりません: %s\n"
+
+#: speaker-test/speaker-test.c:461
+#, c-format
+msgid "Access type not available for playback: %s\n"
+msgstr "アクセスタイプが不正です: %s\n"
+
+#: speaker-test/speaker-test.c:468
+#, c-format
+msgid "Sample format not available for playback: %s\n"
+msgstr "指定のサンプルフォーマットを使用できません: %s\n"
+
+#: speaker-test/speaker-test.c:475
+#, c-format
+msgid "Channels count (%i) not available for playbacks: %s\n"
+msgstr "チャネル数 (%i) を使用できません: %s\n"
+
+#: speaker-test/speaker-test.c:483
+#, c-format
+msgid "Rate %iHz not available for playback: %s\n"
+msgstr "レート %iHz を使用できません: %s\n"
+
+#: speaker-test/speaker-test.c:488
+#, c-format
+msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
+msgstr "設定レートが一致しません< (要求値 %iHz, 取得値 %iHz, エラー %d)\n"
+
+#: speaker-test/speaker-test.c:492
+#, c-format
+msgid "Rate set to %iHz (requested %iHz)\n"
+msgstr "レート %iHz (要求値 %iHz)\n"
+
+#: speaker-test/speaker-test.c:498
+#, c-format
+msgid "Buffer size range from %lu to %lu\n"
+msgstr "バッファサイズ範囲 %lu 〜 %lu\n"
+
+#: speaker-test/speaker-test.c:499
+#, c-format
+msgid "Period size range from %lu to %lu\n"
+msgstr "ピリオドサイズ範囲 %lu 〜 %lu\n"
+
+#: speaker-test/speaker-test.c:501
+#, c-format
+msgid "Requested period time %u us\n"
+msgstr "要求されたピリオド長 %u us\n"
+
+#: speaker-test/speaker-test.c:504
+#, c-format
+msgid "Unable to set period time %u us for playback: %s\n"
+msgstr "ピリオド長 %u us を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:510
+#, c-format
+msgid "Requested buffer time %u us\n"
+msgstr "要求されたバッファ長 %u us\n"
+
+#: speaker-test/speaker-test.c:513
+#, c-format
+msgid "Unable to set buffer time %u us for playback: %s\n"
+msgstr "バッファ長 %u us を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:522
+#, c-format
+msgid "Using max buffer size %lu\n"
+msgstr "最大バッファサイズ %lu を使用\n"
+
+#: speaker-test/speaker-test.c:525
+#, c-format
+msgid "Unable to set buffer size %lu for playback: %s\n"
+msgstr "バッファサイズ %lu を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:531
+#, c-format
+msgid "Periods = %u\n"
+msgstr "ピリオド数 = %u\n"
+
+#: speaker-test/speaker-test.c:534
+#, c-format
+msgid "Unable to set nperiods %u for playback: %s\n"
+msgstr "ピリオド数 %u を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:543
+#, c-format
+msgid "Unable to set hw params for playback: %s\n"
+msgstr "hw params を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:549
+#, c-format
+msgid "was set period_size = %lu\n"
+msgstr "period_size = %lu で設定\n"
+
+#: speaker-test/speaker-test.c:550
+#, c-format
+msgid "was set buffer_size = %lu\n"
+msgstr "buffer_size = %lu で設定\n"
+
+#: speaker-test/speaker-test.c:552
+#, c-format
+msgid "buffer to small, could not use\n"
+msgstr "バッファが小さすぎます\n"
+
+#: speaker-test/speaker-test.c:565
+#, c-format
+msgid "Unable to determine current swparams for playback: %s\n"
+msgstr "現在の swparams を取得できません: %s\n"
+
+#: speaker-test/speaker-test.c:572
+#, c-format
+msgid "Unable to set start threshold mode for playback: %s\n"
+msgstr "start_threshold モードを設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:579
+#, c-format
+msgid "Unable to set avail min for playback: %s\n"
+msgstr "avail_min を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:586
+#, c-format
+msgid "Unable to set sw params for playback: %s\n"
+msgstr "再生用の sw params を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:606
+#, fuzzy, c-format
+msgid "Unable to set channel map: %s\n"
+msgstr "avail_min を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:626
+#, c-format
+msgid "Can't recovery from underrun, prepare failed: %s\n"
+msgstr "アンダーランから復帰失敗: %s\n"
+
+#: speaker-test/speaker-test.c:637
+#, c-format
+msgid "Can't recovery from suspend, prepare failed: %s\n"
+msgstr "サスペンドから復帰失敗: %s\n"
+
+#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#, c-format
+msgid "No enough memory\n"
+msgstr "メモリが足りません\n"
+
+#: speaker-test/speaker-test.c:706
+#, c-format
+msgid "Cannot open WAV file %s\n"
+msgstr "WAVファイルがオープンできません: %s\n"
+
+#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#, c-format
+msgid "Invalid WAV file %s\n"
+msgstr "不正なWAVファイルです: %s\n"
+
+#: speaker-test/speaker-test.c:715
+#, c-format
+msgid "Not a WAV file: %s\n"
+msgstr "WAVファイルではありません: %s\n"
+
+#: speaker-test/speaker-test.c:719
+#, c-format
+msgid "Unsupported WAV format %d for %s\n"
+msgstr "未サポートのWAVフォーマット %d: %s\n"
+
+#: speaker-test/speaker-test.c:724
+#, c-format
+msgid "%s is not a mono stream (%d channels)\n"
+msgstr "%s はモノストリームではありません (%d チャネル)\n"
+
+#: speaker-test/speaker-test.c:729
+#, c-format
+msgid "Sample rate doesn't match (%d) for %s\n"
+msgstr "サンプルレートが不一致です(%d): %s\n"
+
+#: speaker-test/speaker-test.c:734
+#, c-format
+msgid "Unsupported sample format bits %d for %s\n"
+msgstr "未サポートのサンプルフォーマットビット %d: %s\n"
+
+#: speaker-test/speaker-test.c:795
+#, c-format
+msgid "Undefined channel %d\n"
+msgstr "未定義のチャネル %d\n"
+
+#: speaker-test/speaker-test.c:846
+#, c-format
+msgid "Write error: %d,%s\n"
+msgstr "書込エラー: %d,%s\n"
+
+#: speaker-test/speaker-test.c:848
+#, c-format
+msgid "xrun_recovery failed: %d,%s\n"
+msgstr "xrun_recovery 失敗: %d,%s\n"
+
+#: speaker-test/speaker-test.c:934
+#, fuzzy, c-format
+msgid ""
+"Usage: speaker-test [OPTION]... \n"
+"-h,--help\thelp\n"
+"-D,--device\tplayback device\n"
+"-r,--rate\tstream rate in Hz\n"
+"-c,--channels\tcount of channels in stream\n"
+"-f,--frequency\tsine wave frequency in Hz\n"
+"-F,--format\tsample format\n"
+"-b,--buffer\tring buffer size in us\n"
+"-p,--period\tperiod size in us\n"
+"-P,--nperiods\tnumber of periods\n"
+"-t,--test\tpink=use pink noise, sine=use sine wave, wav=WAV file\n"
+"-l,--nloops\tspecify number of loops to test, 0 = infinite\n"
+"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
+"-w,--wavfile\tUse the given WAV file as a test sound\n"
+"-W,--wavdir\tSpecify the directory containing WAV files\n"
+"-m,--chmap\tSpecify the channel map to override\n"
+"\n"
+msgstr ""
+"使用法: speaker-test [オプション]...\n"
+"-h,--help ヘルプ\n"
+"-D,--device 再生デバイス\n"
+"-r,--rate ストリームレート (Hz)\n"
+"-c,--channels チャネル数\n"
+"-f,--frequency 正弦波周波数 (hz)\n"
+"-F,--format サンプルフォーマット\n"
+"-b,--buffer リングバッファサイズ (μs)\n"
+"-p,--period ピリオドサイズ (μs)\n"
+"-P,--nperiods ピリオド数\n"
+"-t,--test pink=ピンクノイズを使用, sine=正弦波を使用, wav=WAVファ"
+"イル再生\n"
+"-l,--nloops 繰り返しテスト数, 0 = 無制限\n"
+"-s,--speaker 単一スピーカーテスト 1=左 または 2=右\n"
+"-w,--wavfile 指定のWAVファイルをテスト音源として使用\n"
+"-W,--wavdir WAVファイルのあるディレクトリを指定\n"
+"\n"
+
+#: speaker-test/speaker-test.c:1063
+#, c-format
+msgid "Invalid number of periods %d\n"
+msgstr "不正なピリオド数 %d\n"
+
+#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#, c-format
+msgid "Invalid test type %s\n"
+msgstr "不正なテストタイプ %s\n"
+
+#: speaker-test/speaker-test.c:1095
+#, c-format
+msgid "Invalid parameter for -s option.\n"
+msgstr "-s オプションの値が不正です\n"
+
+#: speaker-test/speaker-test.c:1114
+#, c-format
+msgid "Unknown option '%c'\n"
+msgstr "未知のオプション '%c'\n"
+
+#: speaker-test/speaker-test.c:1128
+#, c-format
+msgid "Playback device is %s\n"
+msgstr "再生デバイス: %s\n"
+
+#: speaker-test/speaker-test.c:1129
+#, c-format
+msgid "Stream parameters are %iHz, %s, %i channels\n"
+msgstr "ストリームパラメータ: %iHz, %s, %i チャネル\n"
+
+#: speaker-test/speaker-test.c:1132
+#, c-format
+msgid "Using 16 octaves of pink noise\n"
+msgstr "16 オクターブのピンクノイズを使用\n"
+
+#: speaker-test/speaker-test.c:1135
+#, c-format
+msgid "Sine wave rate is %.4fHz\n"
+msgstr "正弦波レート: %.4fHz\n"
+
+#: speaker-test/speaker-test.c:1138
+#, c-format
+msgid "WAV file(s)\n"
+msgstr "WAV ファイル\n"
+
+#: speaker-test/speaker-test.c:1148
+#, c-format
+msgid "Playback open error: %d,%s\n"
+msgstr "再生オープンエラー: %d,%s\n"
+
+#: speaker-test/speaker-test.c:1154
+#, c-format
+msgid "Setting of hwparams failed: %s\n"
+msgstr "hwparams の設定に失敗: %s\n"
+
+#: speaker-test/speaker-test.c:1158
+#, c-format
+msgid "Setting of swparams failed: %s\n"
+msgstr "swparams の設定に失敗: %s\n"
+
+#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#, c-format
+msgid "Transfer failed: %s\n"
+msgstr "転送に失敗しました: %s\n"
+
+#: speaker-test/speaker-test.c:1213
+#, c-format
+msgid "Time per period = %lf\n"
+msgstr "ピリオド時間 = %lf\n"
+
+#~ msgid "Warning: format is changed to S16_LE\n"
+#~ msgstr "警告: フォーマットは S16_LE に変更されます\n"
+
+#~ msgid "Warning: format is changed to S24_3LE\n"
+#~ msgstr "警告: フォーマットは S24_3LE に変更されます\n"
+
+#~ msgid "Warning: format is changed to S24_LE\n"
+#~ msgstr "警告: フォーマットは S24_LE に変更されます\n"
diff --git a/po/quot.sed b/po/quot.sed
new file mode 100644
index 0000000..0122c46
--- /dev/null
+++ b/po/quot.sed
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
new file mode 100644
index 0000000..2436c49
--- /dev/null
+++ b/po/remove-potcdate.sin
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/stamp-po b/po/stamp-po
new file mode 100644
index 0000000..9788f70
--- /dev/null
+++ b/po/stamp-po
@@ -0,0 +1 @@
+timestamp
diff --git a/seq/Makefile.am b/seq/Makefile.am
new file mode 100644
index 0000000..2c84cee
--- /dev/null
+++ b/seq/Makefile.am
@@ -0,0 +1 @@
+SUBDIRS=aconnect aplaymidi aseqdump aseqnet
diff --git a/seq/Makefile.in b/seq/Makefile.in
new file mode 100644
index 0000000..5e4e9c8
--- /dev/null
+++ b/seq/Makefile.in
@@ -0,0 +1,592 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = seq
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+SUBDIRS = aconnect aplaymidi aseqdump aseqnet
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign seq/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic cscopelist \
+ cscopelist-recursive ctags ctags-recursive distclean \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/seq/aconnect/Makefile.am b/seq/aconnect/Makefile.am
new file mode 100644
index 0000000..507b9fe
--- /dev/null
+++ b/seq/aconnect/Makefile.am
@@ -0,0 +1,7 @@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = README.aconnect aconnect.1
+LDADD = $(LIBINTL)
+
+bin_PROGRAMS = aconnect
+aconnect_SOURCES = aconnect.c
+man_MANS = aconnect.1
diff --git a/seq/aconnect/Makefile.in b/seq/aconnect/Makefile.in
new file mode 100644
index 0000000..35d58ed
--- /dev/null
+++ b/seq/aconnect/Makefile.in
@@ -0,0 +1,649 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = aconnect$(EXEEXT)
+subdir = seq/aconnect
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_aconnect_OBJECTS = aconnect.$(OBJEXT)
+aconnect_OBJECTS = $(am_aconnect_OBJECTS)
+aconnect_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+aconnect_DEPENDENCIES = $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(aconnect_SOURCES)
+DIST_SOURCES = $(aconnect_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = README.aconnect aconnect.1
+LDADD = $(LIBINTL)
+aconnect_SOURCES = aconnect.c
+man_MANS = aconnect.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aconnect/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign seq/aconnect/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+aconnect$(EXEEXT): $(aconnect_OBJECTS) $(aconnect_DEPENDENCIES) $(EXTRA_aconnect_DEPENDENCIES)
+ @rm -f aconnect$(EXEEXT)
+ $(LINK) $(aconnect_OBJECTS) $(aconnect_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aconnect.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/seq/aconnect/README.aconnect b/seq/aconnect/README.aconnect
new file mode 100644
index 0000000..1f6237a
--- /dev/null
+++ b/seq/aconnect/README.aconnect
@@ -0,0 +1,46 @@
+================================================================
+ aconnect - control subscriptions
+ ver.0.1.3
+ Copyright (C) 1999-2000 Takashi Iwai
+================================================================
+
+aconnect is a utility to control subscriptions of two ports as the
+third "manager" client.
+
+For example, the following connects two ports, from 64:0 to 65:0.
+
+ % aconnect 64:0 65:0
+
+To disconnect the existing subscription, use -d option.
+
+ % aconnect -d 64:0 65:0
+
+To see which port is available as input port, run the following
+command:
+
+ % aconnect -i
+ client 0: 'System' [type=kernel]
+ 0 'Timer '
+ 1 'Announce '
+ client 64: '0: MIDI Synth' [type=kernel]
+ 0 'card 0: synth-midi: 0'
+
+Similary, to see the output ports, use -o flag.
+
+ % aconnect -o
+ client 64: '0: MIDI Synth' [type=kernel]
+ 0 'card 0: synth-midi: 0'
+ client 65: 'AWE Wave Table Synth : 0' [type=kernel]
+ 0 'Emu8000 port 0 '
+ 1 'Emu8000 port 1 '
+ 2 'Emu8000 port 2 '
+ 3 'Emu8000 port 3 '
+
+The option -l together with -i or -o shows subscribers for each port.
+
+Ports are connected exclusively when the option -e is specified.
+
+For modifying time-stamp with a queue, use -r or -t option followed by
+a queue index which updates the time-stamp. Former uses real-time queue,
+while the latter uses tick queue. The queue must be used (not necessarily
+owned) by the receiver client.
diff --git a/seq/aconnect/aconnect.1 b/seq/aconnect/aconnect.1
new file mode 100644
index 0000000..2050187
--- /dev/null
+++ b/seq/aconnect/aconnect.1
@@ -0,0 +1,145 @@
+.TH aconnect 1 "August 31, 2000"
+.de EX
+.nf
+.ft CW
+..
+.de EE
+.ft R
+.fi
+..
+.SH NAME
+aconnect \- ALSA sequencer connection manager
+
+.SH SYNOPSIS
+.B aconnect
+[\-d] [\-options] sender receiver
+.br
+.B aconnect
+\-i|\-o [\-options]
+.br
+.B aconnect
+\-x
+
+.SH DESCRIPTION
+.B aconnect
+is a utility to connect and disconnect two existing ports on ALSA sequencer
+system.
+The ports with the arbitrary subscription permission, such as created
+by
+.B aseqview(1),
+can be connected to any (MIDI) device ports using
+.B aconnect.
+For example, to connect from port 64:0 to 65:0, run as follows:
+.IP "" 4
+% aconnect 64:0 65:0
+.PP
+The connection is one-way, and the whole data to the sender port (64:0)
+is redirected to the receiver port (65:0). When another port (e.g. 65:1)
+is attached to the same sender port, the data is sent to both receiver
+ports.
+For disconnection, use
+.B \-d
+option.
+.sp
+.EX
+% aconnect \-d 64:0 65:0
+.EE
+.PP
+The address can be given using the client's name.
+.sp
+.EX
+% aconnect External:0 Emu8000:1
+.EE
+.PP
+Then the port 0 of the client matching with the string "External" is
+connected to the port 1 of the client matching with the "Emu8000".
+.PP
+Another function of
+.B aconnect
+is to list the present ports
+on the given condition.
+The input ports, which may become
+.I sender
+ports, can be listed with
+.B \-i
+option.
+.sp
+.EX
+% aconnect \-i
+client 0: 'System' [type=kernel]
+ 0 'Timer '
+ 1 'Announce '
+client 64: 'External MIDI\-0' [type=kernel]
+ 0 'MIDI 0\-0 '
+.EE
+.PP
+Similarly, to see the output ports, use
+.B \-o
+flag.
+.PP
+You can remove all existing exported connections using
+.B \-x
+option. This function is useful for terminating the ALSA drivers,
+because the modules with sequencer connections cannot be unloaded
+unless their connections are removed.
+
+.SH OPTIONS
+.SS CONNECTION MANAGEMENT
+.TP
+.B \-d, \-\-disconnect
+Disconnect the given subscription.
+.TP
+.B \-e, \-\-exclusive
+Connect ports with exclusive mode.
+Both sender and receiver ports can be no longer connected by any other ports.
+.TP
+.B \-r, \-\-real queue
+Convert time-stamps of event packets to the current value of the given
+.I real-time
+queue.
+This is option is, however, not so useful, since
+the receiver port must use (not necessarily own) the specified queue.
+.TP
+.B \-t, \-\-tick queue
+Like
+.B \-r
+option, but
+time-stamps are converted to the current value of the given
+.I tick
+queue.
+
+.SS LIST PORTS
+.TP
+.B \-i, \-\-input
+List existing input (readable) ports.
+This option is exclusive to
+.B \-o.
+.TP
+.B \-o, \-\-output
+List existing output (writable) ports.
+This option is exclusive to
+.B \-i.
+.TP
+.B \-l, \-\-list
+List the current connection status. The connected and connecting ports
+from/to each port are listed together.
+The suffix flag
+.B [ex]
+means the connection is exclusive.
+The suffix flag
+.B [real:#]
+and
+.B [tick:#]
+mean the connection includes real-time and tick conversion on the listed
+queue, respectively.
+
+.SS REMOVE ALL CONNECTIONS
+.TP
+.B \-x, \-\-removeall
+Remove all exported connections.
+
+.SH "SEE ALSO"
+aseqnet(1), aseqview(1)
+
+.SH AUTHOR
+Takashi Iwai <tiwai@suse.de>
diff --git a/seq/aconnect/aconnect.c b/seq/aconnect/aconnect.c
new file mode 100644
index 0000000..8c66cfd
--- /dev/null
+++ b/seq/aconnect/aconnect.c
@@ -0,0 +1,392 @@
+/*
+ * connect / disconnect two subscriber ports
+ * ver.0.1.3
+ *
+ * Copyright (C) 1999 Takashi Iwai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <stdarg.h>
+#include <locale.h>
+#include <sys/ioctl.h>
+#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "gettext.h"
+
+static void error_handler(const char *file, int line, const char *function, int err, const char *fmt, ...)
+{
+ va_list arg;
+
+ if (err == ENOENT) /* Ignore those misleading "warnings" */
+ return;
+ va_start(arg, fmt);
+ fprintf(stderr, "ALSA lib %s:%i:(%s) ", file, line, function);
+ vfprintf(stderr, fmt, arg);
+ if (err)
+ fprintf(stderr, ": %s", snd_strerror(err));
+ putc('\n', stderr);
+ va_end(arg);
+}
+
+static void usage(void)
+{
+ printf(_("aconnect - ALSA sequencer connection manager\n"));
+ printf(_("Copyright (C) 1999-2000 Takashi Iwai\n"));
+ printf(_("Usage:\n"));
+ printf(_(" * Connection/disconnection between two ports\n"));
+ printf(_(" aconnect [-options] sender receiver\n"));
+ printf(_(" sender, receiver = client:port pair\n"));
+ printf(_(" -d,--disconnect disconnect\n"));
+ printf(_(" -e,--exclusive exclusive connection\n"));
+ printf(_(" -r,--real # convert real-time-stamp on queue\n"));
+ printf(_(" -t,--tick # convert tick-time-stamp on queue\n"));
+ printf(_(" * List connected ports (no subscription action)\n"));
+ printf(_(" aconnect -i|-o [-options]\n"));
+ printf(_(" -i,--input list input (readable) ports\n"));
+ printf(_(" -o,--output list output (writable) ports\n"));
+ printf(_(" -l,--list list current connections of each port\n"));
+ printf(_(" * Remove all exported connections\n"));
+ printf(_(" -x, --removeall\n"));
+}
+
+/*
+ * check permission (capability) of specified port
+ */
+
+#define LIST_INPUT 1
+#define LIST_OUTPUT 2
+
+#define perm_ok(pinfo,bits) ((snd_seq_port_info_get_capability(pinfo) & (bits)) == (bits))
+
+static int check_permission(snd_seq_port_info_t *pinfo, int perm)
+{
+ if (perm) {
+ if (perm & LIST_INPUT) {
+ if (perm_ok(pinfo, SND_SEQ_PORT_CAP_READ|SND_SEQ_PORT_CAP_SUBS_READ))
+ goto __ok;
+ }
+ if (perm & LIST_OUTPUT) {
+ if (perm_ok(pinfo, SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_WRITE))
+ goto __ok;
+ }
+ return 0;
+ }
+ __ok:
+ if (snd_seq_port_info_get_capability(pinfo) & SND_SEQ_PORT_CAP_NO_EXPORT)
+ return 0;
+ return 1;
+}
+
+/*
+ * list subscribers of specified type
+ */
+static void list_each_subs(snd_seq_t *seq, snd_seq_query_subscribe_t *subs, int type, const char *msg)
+{
+ int count = 0;
+ snd_seq_query_subscribe_set_type(subs, type);
+ snd_seq_query_subscribe_set_index(subs, 0);
+ while (snd_seq_query_port_subscribers(seq, subs) >= 0) {
+ const snd_seq_addr_t *addr;
+ if (count++ == 0)
+ printf("\t%s: ", msg);
+ else
+ printf(", ");
+ addr = snd_seq_query_subscribe_get_addr(subs);
+ printf("%d:%d", addr->client, addr->port);
+ if (snd_seq_query_subscribe_get_exclusive(subs))
+ printf("[ex]");
+ if (snd_seq_query_subscribe_get_time_update(subs))
+ printf("[%s:%d]",
+ (snd_seq_query_subscribe_get_time_real(subs) ? "real" : "tick"),
+ snd_seq_query_subscribe_get_queue(subs));
+ snd_seq_query_subscribe_set_index(subs, snd_seq_query_subscribe_get_index(subs) + 1);
+ }
+ if (count > 0)
+ printf("\n");
+}
+
+/*
+ * list subscribers
+ */
+static void list_subscribers(snd_seq_t *seq, const snd_seq_addr_t *addr)
+{
+ snd_seq_query_subscribe_t *subs;
+ snd_seq_query_subscribe_alloca(&subs);
+ snd_seq_query_subscribe_set_root(subs, addr);
+ list_each_subs(seq, subs, SND_SEQ_QUERY_SUBS_READ, _("Connecting To"));
+ list_each_subs(seq, subs, SND_SEQ_QUERY_SUBS_WRITE, _("Connected From"));
+}
+
+/*
+ * search all ports
+ */
+typedef void (*action_func_t)(snd_seq_t *seq, snd_seq_client_info_t *cinfo, snd_seq_port_info_t *pinfo, int count);
+
+static void do_search_port(snd_seq_t *seq, int perm, action_func_t do_action)
+{
+ snd_seq_client_info_t *cinfo;
+ snd_seq_port_info_t *pinfo;
+ int count;
+
+ snd_seq_client_info_alloca(&cinfo);
+ snd_seq_port_info_alloca(&pinfo);
+ snd_seq_client_info_set_client(cinfo, -1);
+ while (snd_seq_query_next_client(seq, cinfo) >= 0) {
+ /* reset query info */
+ snd_seq_port_info_set_client(pinfo, snd_seq_client_info_get_client(cinfo));
+ snd_seq_port_info_set_port(pinfo, -1);
+ count = 0;
+ while (snd_seq_query_next_port(seq, pinfo) >= 0) {
+ if (check_permission(pinfo, perm)) {
+ do_action(seq, cinfo, pinfo, count);
+ count++;
+ }
+ }
+ }
+}
+
+
+static void print_port(snd_seq_t *seq, snd_seq_client_info_t *cinfo,
+ snd_seq_port_info_t *pinfo, int count)
+{
+ if (! count) {
+ printf(_("client %d: '%s' [type=%s]\n"),
+ snd_seq_client_info_get_client(cinfo),
+ snd_seq_client_info_get_name(cinfo),
+ (snd_seq_client_info_get_type(cinfo) == SND_SEQ_USER_CLIENT ?
+ _("user") : _("kernel")));
+ }
+ printf(" %3d '%-16s'\n",
+ snd_seq_port_info_get_port(pinfo),
+ snd_seq_port_info_get_name(pinfo));
+}
+
+static void print_port_and_subs(snd_seq_t *seq, snd_seq_client_info_t *cinfo,
+ snd_seq_port_info_t *pinfo, int count)
+{
+ print_port(seq, cinfo, pinfo, count);
+ list_subscribers(seq, snd_seq_port_info_get_addr(pinfo));
+}
+
+
+/*
+ * remove all (exported) connections
+ */
+static void remove_connection(snd_seq_t *seq, snd_seq_client_info_t *cinfo,
+ snd_seq_port_info_t *pinfo, int count)
+{
+ snd_seq_query_subscribe_t *query;
+ snd_seq_port_info_t *port;
+ snd_seq_port_subscribe_t *subs;
+
+ snd_seq_query_subscribe_alloca(&query);
+ snd_seq_query_subscribe_set_root(query, snd_seq_port_info_get_addr(pinfo));
+ snd_seq_query_subscribe_set_type(query, SND_SEQ_QUERY_SUBS_READ);
+ snd_seq_query_subscribe_set_index(query, 0);
+
+ snd_seq_port_info_alloca(&port);
+ snd_seq_port_subscribe_alloca(&subs);
+
+ while (snd_seq_query_port_subscribers(seq, query) >= 0) {
+ const snd_seq_addr_t *sender = snd_seq_query_subscribe_get_root(query);
+ const snd_seq_addr_t *dest = snd_seq_query_subscribe_get_addr(query);
+
+ if (snd_seq_get_any_port_info(seq, dest->client, dest->port, port) < 0 ||
+ !(snd_seq_port_info_get_capability(port) & SND_SEQ_PORT_CAP_SUBS_WRITE) ||
+ (snd_seq_port_info_get_capability(port) & SND_SEQ_PORT_CAP_NO_EXPORT)) {
+ snd_seq_query_subscribe_set_index(query, snd_seq_query_subscribe_get_index(query) + 1);
+ continue;
+ }
+ snd_seq_port_subscribe_set_queue(subs, snd_seq_query_subscribe_get_queue(query));
+ snd_seq_port_subscribe_set_sender(subs, sender);
+ snd_seq_port_subscribe_set_dest(subs, dest);
+ if (snd_seq_unsubscribe_port(seq, subs) < 0) {
+ snd_seq_query_subscribe_set_index(query, snd_seq_query_subscribe_get_index(query) + 1);
+ }
+ }
+}
+
+static void remove_all_connections(snd_seq_t *seq)
+{
+ do_search_port(seq, 0, remove_connection);
+}
+
+
+/*
+ * main..
+ */
+
+enum {
+ SUBSCRIBE, UNSUBSCRIBE, LIST, REMOVE_ALL
+};
+
+static const struct option long_option[] = {
+ {"disconnect", 0, NULL, 'd'},
+ {"input", 0, NULL, 'i'},
+ {"output", 0, NULL, 'o'},
+ {"real", 1, NULL, 'r'},
+ {"tick", 1, NULL, 't'},
+ {"exclusive", 0, NULL, 'e'},
+ {"list", 0, NULL, 'l'},
+ {"removeall", 0, NULL, 'x'},
+ {NULL, 0, NULL, 0},
+};
+
+int main(int argc, char **argv)
+{
+ int c;
+ snd_seq_t *seq;
+ int queue = 0, convert_time = 0, convert_real = 0, exclusive = 0;
+ int command = SUBSCRIBE;
+ int list_perm = 0;
+ int client;
+ int list_subs = 0;
+ snd_seq_port_subscribe_t *subs;
+ snd_seq_addr_t sender, dest;
+
+#ifdef ENABLE_NLS
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+#endif
+
+ while ((c = getopt_long(argc, argv, "dior:t:elx", long_option, NULL)) != -1) {
+ switch (c) {
+ case 'd':
+ command = UNSUBSCRIBE;
+ break;
+ case 'i':
+ command = LIST;
+ list_perm |= LIST_INPUT;
+ break;
+ case 'o':
+ command = LIST;
+ list_perm |= LIST_OUTPUT;
+ break;
+ case 'e':
+ exclusive = 1;
+ break;
+ case 'r':
+ queue = atoi(optarg);
+ convert_time = 1;
+ convert_real = 1;
+ break;
+ case 't':
+ queue = atoi(optarg);
+ convert_time = 1;
+ convert_real = 0;
+ break;
+ case 'l':
+ list_subs = 1;
+ break;
+ case 'x':
+ command = REMOVE_ALL;
+ break;
+ default:
+ usage();
+ exit(1);
+ }
+ }
+
+ if (snd_seq_open(&seq, "default", SND_SEQ_OPEN_DUPLEX, 0) < 0) {
+ fprintf(stderr, _("can't open sequencer\n"));
+ return 1;
+ }
+
+ snd_lib_error_set_handler(error_handler);
+
+ switch (command) {
+ case LIST:
+ do_search_port(seq, list_perm,
+ list_subs ? print_port_and_subs : print_port);
+ snd_seq_close(seq);
+ return 0;
+ case REMOVE_ALL:
+ remove_all_connections(seq);
+ snd_seq_close(seq);
+ return 0;
+ }
+
+ /* connection or disconnection */
+
+ if (optind + 2 > argc) {
+ snd_seq_close(seq);
+ usage();
+ exit(1);
+ }
+
+ if ((client = snd_seq_client_id(seq)) < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("can't get client id\n"));
+ return 1;
+ }
+
+ /* set client info */
+ if (snd_seq_set_client_name(seq, "ALSA Connector") < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("can't set client info\n"));
+ return 1;
+ }
+
+ /* set subscription */
+ if (snd_seq_parse_address(seq, &sender, argv[optind]) < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("invalid sender address %s\n"), argv[optind]);
+ return 1;
+ }
+ if (snd_seq_parse_address(seq, &dest, argv[optind + 1]) < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("invalid destination address %s\n"), argv[optind + 1]);
+ return 1;
+ }
+ snd_seq_port_subscribe_alloca(&subs);
+ snd_seq_port_subscribe_set_sender(subs, &sender);
+ snd_seq_port_subscribe_set_dest(subs, &dest);
+ snd_seq_port_subscribe_set_queue(subs, queue);
+ snd_seq_port_subscribe_set_exclusive(subs, exclusive);
+ snd_seq_port_subscribe_set_time_update(subs, convert_time);
+ snd_seq_port_subscribe_set_time_real(subs, convert_real);
+
+ if (command == UNSUBSCRIBE) {
+ if (snd_seq_get_port_subscription(seq, subs) < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("No subscription is found\n"));
+ return 1;
+ }
+ if (snd_seq_unsubscribe_port(seq, subs) < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("Disconnection failed (%s)\n"), snd_strerror(errno));
+ return 1;
+ }
+ } else {
+ if (snd_seq_get_port_subscription(seq, subs) == 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("Connection is already subscribed\n"));
+ return 1;
+ }
+ if (snd_seq_subscribe_port(seq, subs) < 0) {
+ snd_seq_close(seq);
+ fprintf(stderr, _("Connection failed (%s)\n"), snd_strerror(errno));
+ return 1;
+ }
+ }
+
+ snd_seq_close(seq);
+
+ return 0;
+}
diff --git a/seq/aplaymidi/Makefile.am b/seq/aplaymidi/Makefile.am
new file mode 100644
index 0000000..bed2a0e
--- /dev/null
+++ b/seq/aplaymidi/Makefile.am
@@ -0,0 +1,5 @@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = aplaymidi.1 arecordmidi.1
+
+bin_PROGRAMS = aplaymidi arecordmidi
+man_MANS = aplaymidi.1 arecordmidi.1
diff --git a/seq/aplaymidi/Makefile.in b/seq/aplaymidi/Makefile.in
new file mode 100644
index 0000000..21fc316
--- /dev/null
+++ b/seq/aplaymidi/Makefile.in
@@ -0,0 +1,652 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = aplaymidi$(EXEEXT) arecordmidi$(EXEEXT)
+subdir = seq/aplaymidi
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+aplaymidi_SOURCES = aplaymidi.c
+aplaymidi_OBJECTS = aplaymidi.$(OBJEXT)
+aplaymidi_LDADD = $(LDADD)
+arecordmidi_SOURCES = arecordmidi.c
+arecordmidi_OBJECTS = arecordmidi.$(OBJEXT)
+arecordmidi_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = aplaymidi.c arecordmidi.c
+DIST_SOURCES = aplaymidi.c arecordmidi.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = aplaymidi.1 arecordmidi.1
+man_MANS = aplaymidi.1 arecordmidi.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aplaymidi/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign seq/aplaymidi/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+aplaymidi$(EXEEXT): $(aplaymidi_OBJECTS) $(aplaymidi_DEPENDENCIES) $(EXTRA_aplaymidi_DEPENDENCIES)
+ @rm -f aplaymidi$(EXEEXT)
+ $(LINK) $(aplaymidi_OBJECTS) $(aplaymidi_LDADD) $(LIBS)
+arecordmidi$(EXEEXT): $(arecordmidi_OBJECTS) $(arecordmidi_DEPENDENCIES) $(EXTRA_arecordmidi_DEPENDENCIES)
+ @rm -f arecordmidi$(EXEEXT)
+ $(LINK) $(arecordmidi_OBJECTS) $(arecordmidi_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aplaymidi.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arecordmidi.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/seq/aplaymidi/aplaymidi.1 b/seq/aplaymidi/aplaymidi.1
new file mode 100644
index 0000000..02fef9d
--- /dev/null
+++ b/seq/aplaymidi/aplaymidi.1
@@ -0,0 +1,63 @@
+.TH APLAYMIDI 1 "2 Nov 2011"
+
+.SH NAME
+aplaymidi \- play Standard MIDI Files
+
+.SH SYNOPSIS
+.B aplaymidi
+\-p client:port[,...] [\-d delay] midifile ...
+
+.SH DESCRIPTION
+.B aplaymidi
+is a command-line utility that plays the specified MIDI file(s) to one
+or more ALSA sequencer ports.
+
+.SH OPTIONS
+
+.TP
+.I \-h, \-\-help
+Prints a list of options.
+
+.TP
+.I \-V, \-\-version
+Prints the current version.
+
+.TP
+.I \-l, \-\-list
+Prints a list of possible output ports.
+
+.TP
+.I \-p, \-\-port=client:port,...
+Sets the sequencer port(s) to which the events in the MIDI file(s) are
+sent.
+
+A client can be specified by its number, its name, or a prefix of its
+name. A port is specified by its number; for port 0 of a client, the
+":0" part of the port specification can be omitted.
+
+Multiple ports can be specified to allow playback of MIDI file(s) that
+contain events for multiple devices (ports), as specified by "Port
+Number" meta events.
+
+For compatibility with
+.B pmidi(1),
+the port specification is taken from the
+.I ALSA_OUTPUT_PORTS
+environment variable if none is given on the command line.
+
+.TP
+.I \-d, \-\-delay=seconds
+Specifies how long to wait after the end of each MIDI file,
+to allow the last notes to die away.
+
+.SH BUGS
+.B aplaymidi
+handles "Port Number" meta events, but not "Port Name" meta events.
+
+.SH SEE ALSO
+pmidi(1)
+.br
+playmidi(1)
+
+.SH AUTHOR
+Clemens Ladisch <clemens@ladisch.de>
diff --git a/seq/aplaymidi/aplaymidi.c b/seq/aplaymidi/aplaymidi.c
new file mode 100644
index 0000000..ad508b3
--- /dev/null
+++ b/seq/aplaymidi/aplaymidi.c
@@ -0,0 +1,932 @@
+/*
+ * aplaymidi.c - play Standard MIDI Files to sequencer port(s)
+ *
+ * Copyright (c) 2004-2006 Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* TODO: sequencer queue timer selection */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "version.h"
+
+/*
+ * 31.25 kbaud, one start bit, eight data bits, two stop bits.
+ * (The MIDI spec says one stop bit, but every transmitter uses two, just to be
+ * sure, so we better not exceed that to avoid overflowing the output buffer.)
+ */
+#define MIDI_BYTES_PER_SEC (31250 / (1 + 8 + 2))
+
+/*
+ * A MIDI event after being parsed/loaded from the file.
+ * There could be made a case for using snd_seq_event_t instead.
+ */
+struct event {
+ struct event *next; /* linked list */
+
+ unsigned char type; /* SND_SEQ_EVENT_xxx */
+ unsigned char port; /* port index */
+ unsigned int tick;
+ union {
+ unsigned char d[3]; /* channel and data bytes */
+ int tempo;
+ unsigned int length; /* length of sysex data */
+ } data;
+ unsigned char sysex[0];
+};
+
+struct track {
+ struct event *first_event; /* list of all events in this track */
+ int end_tick; /* length of this track */
+
+ struct event *current_event; /* used while loading and playing */
+};
+
+static snd_seq_t *seq;
+static int client;
+static int port_count;
+static snd_seq_addr_t *ports;
+static int queue;
+static int end_delay = 2;
+static const char *file_name;
+static FILE *file;
+static int file_offset; /* current offset in input file */
+static int num_tracks;
+static struct track *tracks;
+static int smpte_timing;
+
+/* prints an error message to stderr */
+static void errormsg(const char *msg, ...)
+{
+ va_list ap;
+
+ va_start(ap, msg);
+ vfprintf(stderr, msg, ap);
+ va_end(ap);
+ fputc('\n', stderr);
+}
+
+/* prints an error message to stderr, and dies */
+static void fatal(const char *msg, ...)
+{
+ va_list ap;
+
+ va_start(ap, msg);
+ vfprintf(stderr, msg, ap);
+ va_end(ap);
+ fputc('\n', stderr);
+ exit(EXIT_FAILURE);
+}
+
+/* memory allocation error handling */
+static void check_mem(void *p)
+{
+ if (!p)
+ fatal("Out of memory");
+}
+
+/* error handling for ALSA functions */
+static void check_snd(const char *operation, int err)
+{
+ if (err < 0)
+ fatal("Cannot %s - %s", operation, snd_strerror(err));
+}
+
+static void init_seq(void)
+{
+ int err;
+
+ /* open sequencer */
+ err = snd_seq_open(&seq, "default", SND_SEQ_OPEN_DUPLEX, 0);
+ check_snd("open sequencer", err);
+
+ /* set our name (otherwise it's "Client-xxx") */
+ err = snd_seq_set_client_name(seq, "aplaymidi");
+ check_snd("set client name", err);
+
+ /* find out who we actually are */
+ client = snd_seq_client_id(seq);
+ check_snd("get client id", client);
+}
+
+/* parses one or more port addresses from the string */
+static void parse_ports(const char *arg)
+{
+ char *buf, *s, *port_name;
+ int err;
+
+ /* make a copy of the string because we're going to modify it */
+ buf = strdup(arg);
+ check_mem(buf);
+
+ for (port_name = s = buf; s; port_name = s + 1) {
+ /* Assume that ports are separated by commas. We don't use
+ * spaces because those are valid in client names. */
+ s = strchr(port_name, ',');
+ if (s)
+ *s = '\0';
+
+ ++port_count;
+ ports = realloc(ports, port_count * sizeof(snd_seq_addr_t));
+ check_mem(ports);
+
+ err = snd_seq_parse_address(seq, &ports[port_count - 1], port_name);
+ if (err < 0)
+ fatal("Invalid port %s - %s", port_name, snd_strerror(err));
+ }
+
+ free(buf);
+}
+
+static void create_source_port(void)
+{
+ snd_seq_port_info_t *pinfo;
+ int err;
+
+ snd_seq_port_info_alloca(&pinfo);
+
+ /* the first created port is 0 anyway, but let's make sure ... */
+ snd_seq_port_info_set_port(pinfo, 0);
+ snd_seq_port_info_set_port_specified(pinfo, 1);
+
+ snd_seq_port_info_set_name(pinfo, "aplaymidi");
+
+ snd_seq_port_info_set_capability(pinfo, 0); /* sic */
+ snd_seq_port_info_set_type(pinfo,
+ SND_SEQ_PORT_TYPE_MIDI_GENERIC |
+ SND_SEQ_PORT_TYPE_APPLICATION);
+
+ err = snd_seq_create_port(seq, pinfo);
+ check_snd("create port", err);
+}
+
+static void create_queue(void)
+{
+ queue = snd_seq_alloc_named_queue(seq, "aplaymidi");
+ check_snd("create queue", queue);
+ /* the queue is now locked, which is just fine */
+}
+
+static void connect_ports(void)
+{
+ int i, err;
+
+ /*
+ * We send MIDI events with explicit destination addresses, so we don't
+ * need any connections to the playback ports. But we connect to those
+ * anyway to force any underlying RawMIDI ports to remain open while
+ * we're playing - otherwise, ALSA would reset the port after every
+ * event.
+ */
+ for (i = 0; i < port_count; ++i) {
+ err = snd_seq_connect_to(seq, 0, ports[i].client, ports[i].port);
+ if (err < 0)
+ fatal("Cannot connect to port %d:%d - %s",
+ ports[i].client, ports[i].port, snd_strerror(err));
+ }
+}
+
+static int read_byte(void)
+{
+ ++file_offset;
+ return getc(file);
+}
+
+/* reads a little-endian 32-bit integer */
+static int read_32_le(void)
+{
+ int value;
+ value = read_byte();
+ value |= read_byte() << 8;
+ value |= read_byte() << 16;
+ value |= read_byte() << 24;
+ return !feof(file) ? value : -1;
+}
+
+/* reads a 4-character identifier */
+static int read_id(void)
+{
+ return read_32_le();
+}
+#define MAKE_ID(c1, c2, c3, c4) ((c1) | ((c2) << 8) | ((c3) << 16) | ((c4) << 24))
+
+/* reads a fixed-size big-endian number */
+static int read_int(int bytes)
+{
+ int c, value = 0;
+
+ do {
+ c = read_byte();
+ if (c == EOF)
+ return -1;
+ value = (value << 8) | c;
+ } while (--bytes);
+ return value;
+}
+
+/* reads a variable-length number */
+static int read_var(void)
+{
+ int value, c;
+
+ c = read_byte();
+ value = c & 0x7f;
+ if (c & 0x80) {
+ c = read_byte();
+ value = (value << 7) | (c & 0x7f);
+ if (c & 0x80) {
+ c = read_byte();
+ value = (value << 7) | (c & 0x7f);
+ if (c & 0x80) {
+ c = read_byte();
+ value = (value << 7) | c;
+ if (c & 0x80)
+ return -1;
+ }
+ }
+ }
+ return !feof(file) ? value : -1;
+}
+
+/* allocates a new event */
+static struct event *new_event(struct track *track, int sysex_length)
+{
+ struct event *event;
+
+ event = malloc(sizeof(struct event) + sysex_length);
+ check_mem(event);
+
+ event->next = NULL;
+
+ /* append at the end of the track's linked list */
+ if (track->current_event)
+ track->current_event->next = event;
+ else
+ track->first_event = event;
+ track->current_event = event;
+
+ return event;
+}
+
+static void skip(int bytes)
+{
+ while (bytes > 0)
+ read_byte(), --bytes;
+}
+
+/* reads one complete track from the file */
+static int read_track(struct track *track, int track_end)
+{
+ int tick = 0;
+ unsigned char last_cmd = 0;
+ unsigned char port = 0;
+
+ /* the current file position is after the track ID and length */
+ while (file_offset < track_end) {
+ unsigned char cmd;
+ struct event *event;
+ int delta_ticks, len, c;
+
+ delta_ticks = read_var();
+ if (delta_ticks < 0)
+ break;
+ tick += delta_ticks;
+
+ c = read_byte();
+ if (c < 0)
+ break;
+
+ if (c & 0x80) {
+ /* have command */
+ cmd = c;
+ if (cmd < 0xf0)
+ last_cmd = cmd;
+ } else {
+ /* running status */
+ ungetc(c, file);
+ file_offset--;
+ cmd = last_cmd;
+ if (!cmd)
+ goto _error;
+ }
+
+ switch (cmd >> 4) {
+ /* maps SMF events to ALSA sequencer events */
+ static const unsigned char cmd_type[] = {
+ [0x8] = SND_SEQ_EVENT_NOTEOFF,
+ [0x9] = SND_SEQ_EVENT_NOTEON,
+ [0xa] = SND_SEQ_EVENT_KEYPRESS,
+ [0xb] = SND_SEQ_EVENT_CONTROLLER,
+ [0xc] = SND_SEQ_EVENT_PGMCHANGE,
+ [0xd] = SND_SEQ_EVENT_CHANPRESS,
+ [0xe] = SND_SEQ_EVENT_PITCHBEND
+ };
+
+ case 0x8: /* channel msg with 2 parameter bytes */
+ case 0x9:
+ case 0xa:
+ case 0xb:
+ case 0xe:
+ event = new_event(track, 0);
+ event->type = cmd_type[cmd >> 4];
+ event->port = port;
+ event->tick = tick;
+ event->data.d[0] = cmd & 0x0f;
+ event->data.d[1] = read_byte() & 0x7f;
+ event->data.d[2] = read_byte() & 0x7f;
+ break;
+
+ case 0xc: /* channel msg with 1 parameter byte */
+ case 0xd:
+ event = new_event(track, 0);
+ event->type = cmd_type[cmd >> 4];
+ event->port = port;
+ event->tick = tick;
+ event->data.d[0] = cmd & 0x0f;
+ event->data.d[1] = read_byte() & 0x7f;
+ break;
+
+ case 0xf:
+ switch (cmd) {
+ case 0xf0: /* sysex */
+ case 0xf7: /* continued sysex, or escaped commands */
+ len = read_var();
+ if (len < 0)
+ goto _error;
+ if (cmd == 0xf0)
+ ++len;
+ event = new_event(track, len);
+ event->type = SND_SEQ_EVENT_SYSEX;
+ event->port = port;
+ event->tick = tick;
+ event->data.length = len;
+ if (cmd == 0xf0) {
+ event->sysex[0] = 0xf0;
+ c = 1;
+ } else {
+ c = 0;
+ }
+ for (; c < len; ++c)
+ event->sysex[c] = read_byte();
+ break;
+
+ case 0xff: /* meta event */
+ c = read_byte();
+ len = read_var();
+ if (len < 0)
+ goto _error;
+
+ switch (c) {
+ case 0x21: /* port number */
+ if (len < 1)
+ goto _error;
+ port = read_byte() % port_count;
+ skip(len - 1);
+ break;
+
+ case 0x2f: /* end of track */
+ track->end_tick = tick;
+ skip(track_end - file_offset);
+ return 1;
+
+ case 0x51: /* tempo */
+ if (len < 3)
+ goto _error;
+ if (smpte_timing) {
+ /* SMPTE timing doesn't change */
+ skip(len);
+ } else {
+ event = new_event(track, 0);
+ event->type = SND_SEQ_EVENT_TEMPO;
+ event->port = port;
+ event->tick = tick;
+ event->data.tempo = read_byte() << 16;
+ event->data.tempo |= read_byte() << 8;
+ event->data.tempo |= read_byte();
+ skip(len - 3);
+ }
+ break;
+
+ default: /* ignore all other meta events */
+ skip(len);
+ break;
+ }
+ break;
+
+ default: /* invalid Fx command */
+ goto _error;
+ }
+ break;
+
+ default: /* cannot happen */
+ goto _error;
+ }
+ }
+_error:
+ errormsg("%s: invalid MIDI data (offset %#x)", file_name, file_offset);
+ return 0;
+}
+
+/* reads an entire MIDI file */
+static int read_smf(void)
+{
+ int header_len, type, time_division, i, err;
+ snd_seq_queue_tempo_t *queue_tempo;
+
+ /* the curren position is immediately after the "MThd" id */
+ header_len = read_int(4);
+ if (header_len < 6) {
+invalid_format:
+ errormsg("%s: invalid file format", file_name);
+ return 0;
+ }
+
+ type = read_int(2);
+ if (type != 0 && type != 1) {
+ errormsg("%s: type %d format is not supported", file_name, type);
+ return 0;
+ }
+
+ num_tracks = read_int(2);
+ if (num_tracks < 1 || num_tracks > 1000) {
+ errormsg("%s: invalid number of tracks (%d)", file_name, num_tracks);
+ num_tracks = 0;
+ return 0;
+ }
+ tracks = calloc(num_tracks, sizeof(struct track));
+ if (!tracks) {
+ errormsg("out of memory");
+ num_tracks = 0;
+ return 0;
+ }
+
+ time_division = read_int(2);
+ if (time_division < 0)
+ goto invalid_format;
+
+ /* interpret and set tempo */
+ snd_seq_queue_tempo_alloca(&queue_tempo);
+ smpte_timing = !!(time_division & 0x8000);
+ if (!smpte_timing) {
+ /* time_division is ticks per quarter */
+ snd_seq_queue_tempo_set_tempo(queue_tempo, 500000); /* default: 120 bpm */
+ snd_seq_queue_tempo_set_ppq(queue_tempo, time_division);
+ } else {
+ /* upper byte is negative frames per second */
+ i = 0x80 - ((time_division >> 8) & 0x7f);
+ /* lower byte is ticks per frame */
+ time_division &= 0xff;
+ /* now pretend that we have quarter-note based timing */
+ switch (i) {
+ case 24:
+ snd_seq_queue_tempo_set_tempo(queue_tempo, 500000);
+ snd_seq_queue_tempo_set_ppq(queue_tempo, 12 * time_division);
+ break;
+ case 25:
+ snd_seq_queue_tempo_set_tempo(queue_tempo, 400000);
+ snd_seq_queue_tempo_set_ppq(queue_tempo, 10 * time_division);
+ break;
+ case 29: /* 30 drop-frame */
+ snd_seq_queue_tempo_set_tempo(queue_tempo, 100000000);
+ snd_seq_queue_tempo_set_ppq(queue_tempo, 2997 * time_division);
+ break;
+ case 30:
+ snd_seq_queue_tempo_set_tempo(queue_tempo, 500000);
+ snd_seq_queue_tempo_set_ppq(queue_tempo, 15 * time_division);
+ break;
+ default:
+ errormsg("%s: invalid number of SMPTE frames per second (%d)",
+ file_name, i);
+ return 0;
+ }
+ }
+ err = snd_seq_set_queue_tempo(seq, queue, queue_tempo);
+ if (err < 0) {
+ errormsg("Cannot set queue tempo (%u/%i)",
+ snd_seq_queue_tempo_get_tempo(queue_tempo),
+ snd_seq_queue_tempo_get_ppq(queue_tempo));
+ return 0;
+ }
+
+ /* read tracks */
+ for (i = 0; i < num_tracks; ++i) {
+ int len;
+
+ /* search for MTrk chunk */
+ for (;;) {
+ int id = read_id();
+ len = read_int(4);
+ if (feof(file)) {
+ errormsg("%s: unexpected end of file", file_name);
+ return 0;
+ }
+ if (len < 0 || len >= 0x10000000) {
+ errormsg("%s: invalid chunk length %d", file_name, len);
+ return 0;
+ }
+ if (id == MAKE_ID('M', 'T', 'r', 'k'))
+ break;
+ skip(len);
+ }
+ if (!read_track(&tracks[i], file_offset + len))
+ return 0;
+ }
+ return 1;
+}
+
+static int read_riff(void)
+{
+ /* skip file length */
+ read_byte();
+ read_byte();
+ read_byte();
+ read_byte();
+
+ /* check file type ("RMID" = RIFF MIDI) */
+ if (read_id() != MAKE_ID('R', 'M', 'I', 'D')) {
+invalid_format:
+ errormsg("%s: invalid file format", file_name);
+ return 0;
+ }
+ /* search for "data" chunk */
+ for (;;) {
+ int id = read_id();
+ int len = read_32_le();
+ if (feof(file)) {
+data_not_found:
+ errormsg("%s: data chunk not found", file_name);
+ return 0;
+ }
+ if (id == MAKE_ID('d', 'a', 't', 'a'))
+ break;
+ if (len < 0)
+ goto data_not_found;
+ skip((len + 1) & ~1);
+ }
+ /* the "data" chunk must contain data in SMF format */
+ if (read_id() != MAKE_ID('M', 'T', 'h', 'd'))
+ goto invalid_format;
+ return read_smf();
+}
+
+static void cleanup_file_data(void)
+{
+ int i;
+ struct event *event;
+
+ for (i = 0; i < num_tracks; ++i) {
+ event = tracks[i].first_event;
+ while (event) {
+ struct event *next = event->next;
+ free(event);
+ event = next;
+ }
+ }
+ num_tracks = 0;
+ free(tracks);
+ tracks = NULL;
+}
+
+static void handle_big_sysex(snd_seq_event_t *ev)
+{
+ unsigned int length;
+ ssize_t event_size;
+ int err;
+
+ length = ev->data.ext.len;
+ if (length > MIDI_BYTES_PER_SEC)
+ ev->data.ext.len = MIDI_BYTES_PER_SEC;
+ event_size = snd_seq_event_length(ev);
+ if (event_size + 1 > snd_seq_get_output_buffer_size(seq)) {
+ err = snd_seq_drain_output(seq);
+ check_snd("drain output", err);
+ err = snd_seq_set_output_buffer_size(seq, event_size + 1);
+ check_snd("set output buffer size", err);
+ }
+ while (length > MIDI_BYTES_PER_SEC) {
+ err = snd_seq_event_output(seq, ev);
+ check_snd("output event", err);
+ err = snd_seq_drain_output(seq);
+ check_snd("drain output", err);
+ err = snd_seq_sync_output_queue(seq);
+ check_snd("sync output", err);
+ if (sleep(1))
+ fatal("aborted");
+ ev->data.ext.ptr += MIDI_BYTES_PER_SEC;
+ length -= MIDI_BYTES_PER_SEC;
+ }
+ ev->data.ext.len = length;
+}
+
+static void play_midi(void)
+{
+ snd_seq_event_t ev;
+ int i, max_tick, err;
+
+ /* calculate length of the entire file */
+ max_tick = -1;
+ for (i = 0; i < num_tracks; ++i) {
+ if (tracks[i].end_tick > max_tick)
+ max_tick = tracks[i].end_tick;
+ }
+
+ /* initialize current position in each track */
+ for (i = 0; i < num_tracks; ++i)
+ tracks[i].current_event = tracks[i].first_event;
+
+ /* common settings for all our events */
+ snd_seq_ev_clear(&ev);
+ ev.queue = queue;
+ ev.source.port = 0;
+ ev.flags = SND_SEQ_TIME_STAMP_TICK;
+
+ err = snd_seq_start_queue(seq, queue, NULL);
+ check_snd("start queue", err);
+ /* The queue won't be started until the START_QUEUE event is
+ * actually drained to the kernel, which is exactly what we want. */
+
+ for (;;) {
+ struct event* event = NULL;
+ struct track* event_track = NULL;
+ int i, min_tick = max_tick + 1;
+
+ /* search next event */
+ for (i = 0; i < num_tracks; ++i) {
+ struct track *track = &tracks[i];
+ struct event *e2 = track->current_event;
+ if (e2 && e2->tick < min_tick) {
+ min_tick = e2->tick;
+ event = e2;
+ event_track = track;
+ }
+ }
+ if (!event)
+ break; /* end of song reached */
+
+ /* advance pointer to next event */
+ event_track->current_event = event->next;
+
+ /* output the event */
+ ev.type = event->type;
+ ev.time.tick = event->tick;
+ ev.dest = ports[event->port];
+ switch (ev.type) {
+ case SND_SEQ_EVENT_NOTEON:
+ case SND_SEQ_EVENT_NOTEOFF:
+ case SND_SEQ_EVENT_KEYPRESS:
+ snd_seq_ev_set_fixed(&ev);
+ ev.data.note.channel = event->data.d[0];
+ ev.data.note.note = event->data.d[1];
+ ev.data.note.velocity = event->data.d[2];
+ break;
+ case SND_SEQ_EVENT_CONTROLLER:
+ snd_seq_ev_set_fixed(&ev);
+ ev.data.control.channel = event->data.d[0];
+ ev.data.control.param = event->data.d[1];
+ ev.data.control.value = event->data.d[2];
+ break;
+ case SND_SEQ_EVENT_PGMCHANGE:
+ case SND_SEQ_EVENT_CHANPRESS:
+ snd_seq_ev_set_fixed(&ev);
+ ev.data.control.channel = event->data.d[0];
+ ev.data.control.value = event->data.d[1];
+ break;
+ case SND_SEQ_EVENT_PITCHBEND:
+ snd_seq_ev_set_fixed(&ev);
+ ev.data.control.channel = event->data.d[0];
+ ev.data.control.value =
+ ((event->data.d[1]) |
+ ((event->data.d[2]) << 7)) - 0x2000;
+ break;
+ case SND_SEQ_EVENT_SYSEX:
+ snd_seq_ev_set_variable(&ev, event->data.length,
+ event->sysex);
+ handle_big_sysex(&ev);
+ break;
+ case SND_SEQ_EVENT_TEMPO:
+ snd_seq_ev_set_fixed(&ev);
+ ev.dest.client = SND_SEQ_CLIENT_SYSTEM;
+ ev.dest.port = SND_SEQ_PORT_SYSTEM_TIMER;
+ ev.data.queue.queue = queue;
+ ev.data.queue.param.value = event->data.tempo;
+ break;
+ default:
+ fatal("Invalid event type %d!", ev.type);
+ }
+
+ /* this blocks when the output pool has been filled */
+ err = snd_seq_event_output(seq, &ev);
+ check_snd("output event", err);
+ }
+
+ /* schedule queue stop at end of song */
+ snd_seq_ev_set_fixed(&ev);
+ ev.type = SND_SEQ_EVENT_STOP;
+ ev.time.tick = max_tick;
+ ev.dest.client = SND_SEQ_CLIENT_SYSTEM;
+ ev.dest.port = SND_SEQ_PORT_SYSTEM_TIMER;
+ ev.data.queue.queue = queue;
+ err = snd_seq_event_output(seq, &ev);
+ check_snd("output event", err);
+
+ /* make sure that the sequencer sees all our events */
+ err = snd_seq_drain_output(seq);
+ check_snd("drain output", err);
+
+ /*
+ * There are three possibilities how to wait until all events have
+ * been played:
+ * 1) send an event back to us (like pmidi does), and wait for it;
+ * 2) wait for the EVENT_STOP notification for our queue which is sent
+ * by the system timer port (this would require a subscription);
+ * 3) wait until the output pool is empty.
+ * The last is the simplest.
+ */
+ err = snd_seq_sync_output_queue(seq);
+ check_snd("sync output", err);
+
+ /* give the last notes time to die away */
+ if (end_delay > 0)
+ sleep(end_delay);
+}
+
+static void play_file(void)
+{
+ int ok;
+
+ if (!strcmp(file_name, "-"))
+ file = stdin;
+ else
+ file = fopen(file_name, "rb");
+ if (!file) {
+ errormsg("Cannot open %s - %s", file_name, strerror(errno));
+ return;
+ }
+
+ file_offset = 0;
+ ok = 0;
+
+ switch (read_id()) {
+ case MAKE_ID('M', 'T', 'h', 'd'):
+ ok = read_smf();
+ break;
+ case MAKE_ID('R', 'I', 'F', 'F'):
+ ok = read_riff();
+ break;
+ default:
+ errormsg("%s is not a Standard MIDI File", file_name);
+ break;
+ }
+
+ if (file != stdin)
+ fclose(file);
+
+ if (ok)
+ play_midi();
+
+ cleanup_file_data();
+}
+
+static void list_ports(void)
+{
+ snd_seq_client_info_t *cinfo;
+ snd_seq_port_info_t *pinfo;
+
+ snd_seq_client_info_alloca(&cinfo);
+ snd_seq_port_info_alloca(&pinfo);
+
+ puts(" Port Client name Port name");
+
+ snd_seq_client_info_set_client(cinfo, -1);
+ while (snd_seq_query_next_client(seq, cinfo) >= 0) {
+ int client = snd_seq_client_info_get_client(cinfo);
+
+ snd_seq_port_info_set_client(pinfo, client);
+ snd_seq_port_info_set_port(pinfo, -1);
+ while (snd_seq_query_next_port(seq, pinfo) >= 0) {
+ /* port must understand MIDI messages */
+ if (!(snd_seq_port_info_get_type(pinfo)
+ & SND_SEQ_PORT_TYPE_MIDI_GENERIC))
+ continue;
+ /* we need both WRITE and SUBS_WRITE */
+ if ((snd_seq_port_info_get_capability(pinfo)
+ & (SND_SEQ_PORT_CAP_WRITE | SND_SEQ_PORT_CAP_SUBS_WRITE))
+ != (SND_SEQ_PORT_CAP_WRITE | SND_SEQ_PORT_CAP_SUBS_WRITE))
+ continue;
+ printf("%3d:%-3d %-32.32s %s\n",
+ snd_seq_port_info_get_client(pinfo),
+ snd_seq_port_info_get_port(pinfo),
+ snd_seq_client_info_get_name(cinfo),
+ snd_seq_port_info_get_name(pinfo));
+ }
+ }
+}
+
+static void usage(const char *argv0)
+{
+ printf(
+ "Usage: %s -p client:port[,...] [-d delay] midifile ...\n"
+ "-h, --help this help\n"
+ "-V, --version print current version\n"
+ "-l, --list list all possible output ports\n"
+ "-p, --port=client:port,... set port(s) to play to\n"
+ "-d, --delay=seconds delay after song ends\n",
+ argv0);
+}
+
+static void version(void)
+{
+ puts("aplaymidi version " SND_UTIL_VERSION_STR);
+}
+
+int main(int argc, char *argv[])
+{
+ static const char short_options[] = "hVlp:d:";
+ static const struct option long_options[] = {
+ {"help", 0, NULL, 'h'},
+ {"version", 0, NULL, 'V'},
+ {"list", 0, NULL, 'l'},
+ {"port", 1, NULL, 'p'},
+ {"delay", 1, NULL, 'd'},
+ {}
+ };
+ int c;
+ int do_list = 0;
+
+ init_seq();
+
+ while ((c = getopt_long(argc, argv, short_options,
+ long_options, NULL)) != -1) {
+ switch (c) {
+ case 'h':
+ usage(argv[0]);
+ return 0;
+ case 'V':
+ version();
+ return 0;
+ case 'l':
+ do_list = 1;
+ break;
+ case 'p':
+ parse_ports(optarg);
+ break;
+ case 'd':
+ end_delay = atoi(optarg);
+ break;
+ default:
+ usage(argv[0]);
+ return 1;
+ }
+ }
+
+ if (do_list) {
+ list_ports();
+ } else {
+ if (port_count < 1) {
+ /* use env var for compatibility with pmidi */
+ const char *ports_str = getenv("ALSA_OUTPUT_PORTS");
+ if (ports_str)
+ parse_ports(ports_str);
+ if (port_count < 1) {
+ errormsg("Please specify at least one port with --port.");
+ return 1;
+ }
+ }
+ if (optind >= argc) {
+ errormsg("Please specify a file to play.");
+ return 1;
+ }
+
+ create_source_port();
+ create_queue();
+ connect_ports();
+
+ for (; optind < argc; ++optind) {
+ file_name = argv[optind];
+ play_file();
+ }
+ }
+ snd_seq_close(seq);
+ return 0;
+}
diff --git a/seq/aplaymidi/arecordmidi.1 b/seq/aplaymidi/arecordmidi.1
new file mode 100644
index 0000000..78b3a3a
--- /dev/null
+++ b/seq/aplaymidi/arecordmidi.1
@@ -0,0 +1,82 @@
+.TH ARECORDMIDI 1 "17 Sep 2007"
+
+.SH NAME
+arecordmidi \- record Standard MIDI Files
+
+.SH SYNOPSIS
+.B arecordmidi
+\-p client:port[,...] [options] midifile
+
+.SH DESCRIPTION
+.B arecordmidi
+is a command-line utility that records a Standard MIDI File from one or
+more ALSA sequencer ports.
+
+To stop recording, press Ctrl+C.
+
+.SH OPTIONS
+
+.TP
+.I \-h,\-\-help
+Prints a list of options.
+
+.TP
+.I \-V,\-\-version
+Prints the current version.
+
+.TP
+.I \-l,\-\-list
+Prints a list of possible input ports.
+
+.TP
+.I \-p,\-\-port=client:port,...
+Sets the sequencer port(s) from which events are recorded.
+
+A client can be specified by its number, its name, or a prefix of its
+name. A port is specified by its number; for port 0 of a client, the
+":0" part of the port specification can be omitted.
+
+.TP
+.I \-b,\-\-bpm=beats
+Sets the musical tempo of the MIDI file, in beats per minute.
+The default value is 120 BPM.
+
+.TP
+.I \-f,\-\-fps=frames
+Sets the SMPTE resolution, in frames per second.
+Possible values are 24, 25, 29.97 (for 30 drop-frame), and 30.
+
+.TP
+.I \-t,\-\-ticks=ticks
+Sets the resolution of timestamps (ticks) in the MIDI file,
+in ticks per beat (when using musical tempo) or ticks per frame
+(when using SMPTE timing).
+The default value is 384 ticks/beat or 40 ticks/frame, respectively.
+
+.TP
+.I \-s,\-\-split\-channels
+Specifies that the data for each MIDI channel should be written to a
+separate track in the MIDI file.
+This will result in a "format 1" file.
+Otherwise, when there is only one track,
+.B arecordmidi
+will generate a "format 0" file.
+
+.TP
+.I \-m,\-\-metronome=client:port
+Plays a metronome signal on the specified sequencer port.
+
+Metronome sounds are played on channel 10, MIDI notes 33 & 34 (GM2/GS/XG
+metronome standard notes), with velocity 100 and duration 1.
+
+.TP
+.I \-i,\-\-timesig=numerator:denominator
+Sets the time signature for the MIDI file and metronome.
+
+The time signature is specified as usual with two numbers, representing
+the numerator and denominator of the time signature as it would be
+notated. The denominator must be a power of two. Both numbers should be
+separated by a colon. The time signature is 4:4 by default.
+
+.SH AUTHOR
+Clemens Ladisch <clemens@ladisch.de>
diff --git a/seq/aplaymidi/arecordmidi.c b/seq/aplaymidi/arecordmidi.c
new file mode 100644
index 0000000..9628086
--- /dev/null
+++ b/seq/aplaymidi/arecordmidi.c
@@ -0,0 +1,880 @@
+/*
+ * arecordmidi.c - record standard MIDI files from sequencer ports
+ *
+ * Copyright (c) 2004-2005 Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* TODO: sequencer queue timer selection */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <signal.h>
+#include <getopt.h>
+#include <sys/poll.h>
+#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "version.h"
+
+#define BUFFER_SIZE 4088
+
+/* linked list of buffers, stores data as in the .mid file */
+struct buffer {
+ struct buffer *next;
+ unsigned char buf[BUFFER_SIZE];
+};
+
+struct smf_track {
+ int size; /* size of entire data */
+ int cur_buf_size; /* size of cur_buf */
+ struct buffer *cur_buf;
+ snd_seq_tick_time_t last_tick; /* end of track */
+ unsigned char last_command; /* used for running status */
+ int used; /* anything record on this track */
+ struct buffer first_buf; /* list head */
+};
+
+/* timing/sysex + 16 channels */
+#define TRACKS_PER_PORT 17
+
+/* metronome settings */
+/* TODO: create options for this */
+#define METRONOME_CHANNEL 9
+#define METRONOME_STRONG_NOTE 34
+#define METRONOME_WEAK_NOTE 33
+#define METRONOME_VELOCITY 100
+#define METRONOME_PROGRAM 0
+
+static snd_seq_t *seq;
+static int client;
+static int port_count;
+static snd_seq_addr_t *ports;
+static int queue;
+static int smpte_timing = 0;
+static int beats = 120;
+static int frames;
+static int ticks = 0;
+static FILE *file;
+static int channel_split;
+static int num_tracks;
+static struct smf_track *tracks;
+static volatile sig_atomic_t stop = 0;
+static int use_metronome = 0;
+static snd_seq_addr_t metronome_port;
+static int metronome_weak_note = METRONOME_WEAK_NOTE;
+static int metronome_strong_note = METRONOME_STRONG_NOTE;
+static int metronome_velocity = METRONOME_VELOCITY;
+static int metronome_program = METRONOME_PROGRAM;
+static int metronome_channel = METRONOME_CHANNEL;
+static int ts_num = 4; /* time signature: numerator */
+static int ts_div = 4; /* time signature: denominator */
+static int ts_dd = 2; /* time signature: denominator as a power of two */
+
+
+/* prints an error message to stderr, and dies */
+static void fatal(const char *msg, ...)
+{
+ va_list ap;
+
+ va_start(ap, msg);
+ vfprintf(stderr, msg, ap);
+ va_end(ap);
+ fputc('\n', stderr);
+ exit(EXIT_FAILURE);
+}
+
+/* memory allocation error handling */
+static void check_mem(void *p)
+{
+ if (!p)
+ fatal("Out of memory");
+}
+
+/* error handling for ALSA functions */
+static void check_snd(const char *operation, int err)
+{
+ if (err < 0)
+ fatal("Cannot %s - %s", operation, snd_strerror(err));
+}
+
+static void init_seq(void)
+{
+ int err;
+
+ /* open sequencer */
+ err = snd_seq_open(&seq, "default", SND_SEQ_OPEN_DUPLEX, 0);
+ check_snd("open sequencer", err);
+
+ /* find out our client's id */
+ client = snd_seq_client_id(seq);
+ check_snd("get client id", client);
+
+ /* set our client's name */
+ err = snd_seq_set_client_name(seq, "arecordmidi");
+ check_snd("set client name", err);
+}
+
+/* parses one or more port addresses from the string */
+static void parse_ports(const char *arg)
+{
+ char *buf, *s, *port_name;
+ int err;
+
+ /* make a copy of the string because we're going to modify it */
+ buf = strdup(arg);
+ check_mem(buf);
+
+ for (port_name = s = buf; s; port_name = s + 1) {
+ /* Assume that ports are separated by commas. We don't use
+ * spaces because those are valid in client names. */
+ s = strchr(port_name, ',');
+ if (s)
+ *s = '\0';
+
+ ++port_count;
+ ports = realloc(ports, port_count * sizeof(snd_seq_addr_t));
+ check_mem(ports);
+
+ err = snd_seq_parse_address(seq, &ports[port_count - 1], port_name);
+ if (err < 0)
+ fatal("Invalid port %s - %s", port_name, snd_strerror(err));
+ }
+
+ free(buf);
+}
+
+/* parses the metronome port address */
+static void init_metronome(const char *arg)
+{
+ int err;
+
+ err = snd_seq_parse_address(seq, &metronome_port, arg);
+ if (err < 0)
+ fatal("Invalid port %s - %s", arg, snd_strerror(err));
+ use_metronome = 1;
+}
+
+/* parses time signature specification */
+static void time_signature(const char *arg)
+{
+ long x = 0;
+ char *sep;
+
+ x = strtol(arg, &sep, 10);
+ if (x < 1 || x > 64 || *sep != ':')
+ fatal("Invalid time signature (%s)", arg);
+ ts_num = x;
+ x = strtol(++sep, NULL, 10);
+ if (x < 1 || x > 64)
+ fatal("Invalid time signature (%s)", arg);
+ ts_div = x;
+ for (ts_dd = 0; x > 1; x /= 2)
+ ++ts_dd;
+}
+
+/*
+ * Metronome implementation
+ */
+static void metronome_note(unsigned char note, unsigned int tick)
+{
+ snd_seq_event_t ev;
+ snd_seq_ev_clear(&ev);
+ snd_seq_ev_set_note(&ev, metronome_channel, note, metronome_velocity, 1);
+ snd_seq_ev_schedule_tick(&ev, queue, 0, tick);
+ snd_seq_ev_set_source(&ev, port_count);
+ snd_seq_ev_set_subs(&ev);
+ snd_seq_event_output(seq, &ev);
+}
+
+static void metronome_echo(unsigned int tick)
+{
+ snd_seq_event_t ev;
+ snd_seq_ev_clear(&ev);
+ ev.type = SND_SEQ_EVENT_USR0;
+ snd_seq_ev_schedule_tick(&ev, queue, 0, tick);
+ snd_seq_ev_set_source(&ev, port_count);
+ snd_seq_ev_set_dest(&ev, client, port_count);
+ snd_seq_event_output(seq, &ev);
+}
+
+static void metronome_pattern(unsigned int tick)
+{
+ int j, t, duration;
+
+ t = tick;
+ duration = ticks * 4 / ts_div;
+ for (j = 0; j < ts_num; j++) {
+ metronome_note(j ? metronome_weak_note : metronome_strong_note, t);
+ t += duration;
+ }
+ metronome_echo(t);
+ snd_seq_drain_output(seq);
+}
+
+static void metronome_set_program(void)
+{
+ snd_seq_event_t ev;
+
+ snd_seq_ev_clear(&ev);
+ snd_seq_ev_set_pgmchange(&ev, metronome_channel, metronome_program);
+ snd_seq_ev_set_source(&ev, port_count);
+ snd_seq_ev_set_subs(&ev);
+ snd_seq_event_output(seq, &ev);
+}
+
+static void init_tracks(void)
+{
+ int i;
+
+ /* MIDI RP-019 says we need at least one track per port */
+ num_tracks = port_count;
+ /* Allocate one track for each possible channel.
+ * Empty tracks won't be written to the file. */
+ if (channel_split)
+ num_tracks *= TRACKS_PER_PORT;
+
+ tracks = calloc(num_tracks, sizeof(struct smf_track));
+ check_mem(tracks);
+ for (i = 0; i < num_tracks; ++i)
+ tracks[i].cur_buf = &tracks[i].first_buf;
+}
+
+static void create_queue(void)
+{
+ snd_seq_queue_tempo_t *tempo;
+ int err;
+
+ queue = snd_seq_alloc_named_queue(seq, "arecordmidi");
+ check_snd("create queue", queue);
+
+ snd_seq_queue_tempo_alloca(&tempo);
+ if (!smpte_timing) {
+ snd_seq_queue_tempo_set_tempo(tempo, 60000000 / beats);
+ snd_seq_queue_tempo_set_ppq(tempo, ticks);
+ } else {
+ /*
+ * ALSA doesn't know about the SMPTE time divisions, so
+ * we pretend to have a musical tempo with the equivalent
+ * number of ticks/s.
+ */
+ switch (frames) {
+ case 24:
+ snd_seq_queue_tempo_set_tempo(tempo, 500000);
+ snd_seq_queue_tempo_set_ppq(tempo, 12 * ticks);
+ break;
+ case 25:
+ snd_seq_queue_tempo_set_tempo(tempo, 400000);
+ snd_seq_queue_tempo_set_ppq(tempo, 10 * ticks);
+ break;
+ case 29:
+ snd_seq_queue_tempo_set_tempo(tempo, 100000000);
+ snd_seq_queue_tempo_set_ppq(tempo, 2997 * ticks);
+ break;
+ case 30:
+ snd_seq_queue_tempo_set_tempo(tempo, 500000);
+ snd_seq_queue_tempo_set_ppq(tempo, 15 * ticks);
+ break;
+ default:
+ fatal("Invalid SMPTE frames %d", frames);
+ }
+ }
+ err = snd_seq_set_queue_tempo(seq, queue, tempo);
+ if (err < 0)
+ fatal("Cannot set queue tempo (%u/%i)",
+ snd_seq_queue_tempo_get_tempo(tempo),
+ snd_seq_queue_tempo_get_ppq(tempo));
+}
+
+static void create_ports(void)
+{
+ snd_seq_port_info_t *pinfo;
+ int i, err;
+ char name[32];
+
+ snd_seq_port_info_alloca(&pinfo);
+
+ /* common information for all our ports */
+ snd_seq_port_info_set_capability(pinfo,
+ SND_SEQ_PORT_CAP_WRITE |
+ SND_SEQ_PORT_CAP_SUBS_WRITE);
+ snd_seq_port_info_set_type(pinfo,
+ SND_SEQ_PORT_TYPE_MIDI_GENERIC |
+ SND_SEQ_PORT_TYPE_APPLICATION);
+ snd_seq_port_info_set_midi_channels(pinfo, 16);
+
+ /* we want to know when the events got delivered to us */
+ snd_seq_port_info_set_timestamping(pinfo, 1);
+ snd_seq_port_info_set_timestamp_queue(pinfo, queue);
+
+ /* our port number is the same as our port index */
+ snd_seq_port_info_set_port_specified(pinfo, 1);
+ for (i = 0; i < port_count; ++i) {
+ snd_seq_port_info_set_port(pinfo, i);
+
+ sprintf(name, "arecordmidi port %i", i);
+ snd_seq_port_info_set_name(pinfo, name);
+
+ err = snd_seq_create_port(seq, pinfo);
+ check_snd("create port", err);
+ }
+
+ /* create an optional metronome port */
+ if (use_metronome) {
+ snd_seq_port_info_set_port(pinfo, port_count);
+ snd_seq_port_info_set_name(pinfo, "arecordmidi metronome");
+ snd_seq_port_info_set_capability(pinfo,
+ SND_SEQ_PORT_CAP_READ |
+ SND_SEQ_PORT_CAP_WRITE);
+ snd_seq_port_info_set_type(pinfo, SND_SEQ_PORT_TYPE_APPLICATION);
+ snd_seq_port_info_set_midi_channels(pinfo, 0);
+ snd_seq_port_info_set_timestamping(pinfo, 0);
+ err = snd_seq_create_port(seq, pinfo);
+ check_snd("create metronome port", err);
+ }
+}
+
+static void connect_ports(void)
+{
+ int i, err;
+
+ for (i = 0; i < port_count; ++i) {
+ err = snd_seq_connect_from(seq, i, ports[i].client, ports[i].port);
+ if (err < 0)
+ fatal("Cannot connect from port %d:%d - %s",
+ ports[i].client, ports[i].port, snd_strerror(err));
+ }
+
+ /* subscribe the metronome port */
+ if (use_metronome) {
+ err = snd_seq_connect_to(seq, port_count, metronome_port.client, metronome_port.port);
+ if (err < 0)
+ fatal("Cannot connect to port %d:%d - %s",
+ metronome_port.client, metronome_port.port, snd_strerror(err));
+ }
+}
+
+/* records a byte to be written to the .mid file */
+static void add_byte(struct smf_track *track, unsigned char byte)
+{
+ /* make sure we have enough room in the current buffer */
+ if (track->cur_buf_size >= BUFFER_SIZE) {
+ track->cur_buf->next = calloc(1, sizeof(struct buffer));
+ if (!track->cur_buf->next)
+ fatal("out of memory");
+ track->cur_buf = track->cur_buf->next;
+ track->cur_buf_size = 0;
+ }
+
+ track->cur_buf->buf[track->cur_buf_size++] = byte;
+ track->size++;
+}
+
+/* record a variable-length quantity */
+static void var_value(struct smf_track *track, int v)
+{
+ if (v >= (1 << 28))
+ add_byte(track, 0x80 | ((v >> 28) & 0x03));
+ if (v >= (1 << 21))
+ add_byte(track, 0x80 | ((v >> 21) & 0x7f));
+ if (v >= (1 << 14))
+ add_byte(track, 0x80 | ((v >> 14) & 0x7f));
+ if (v >= (1 << 7))
+ add_byte(track, 0x80 | ((v >> 7) & 0x7f));
+ add_byte(track, v & 0x7f);
+}
+
+/* record the delta time from the last event */
+static void delta_time(struct smf_track *track, const snd_seq_event_t *ev)
+{
+ int diff = ev->time.tick - track->last_tick;
+ if (diff < 0)
+ diff = 0;
+ var_value(track, diff);
+ track->last_tick = ev->time.tick;
+}
+
+/* record a status byte (or not if we can use running status) */
+static void command(struct smf_track *track, unsigned char cmd)
+{
+ if (cmd != track->last_command)
+ add_byte(track, cmd);
+ track->last_command = cmd < 0xf0 ? cmd : 0;
+}
+
+/* put port numbers into all tracks */
+static void record_port_numbers(void)
+{
+ int i;
+
+ for (i = 0; i < num_tracks; ++i) {
+ var_value(&tracks[i], 0);
+ add_byte(&tracks[i], 0xff);
+ add_byte(&tracks[i], 0x21);
+ var_value(&tracks[i], 1);
+ if (channel_split)
+ add_byte(&tracks[i], i / TRACKS_PER_PORT);
+ else
+ add_byte(&tracks[i], i);
+ }
+}
+
+static void record_event(const snd_seq_event_t *ev)
+{
+ unsigned int i;
+ struct smf_track *track;
+
+ /* ignore events without proper timestamps */
+ if (ev->queue != queue || !snd_seq_ev_is_tick(ev))
+ return;
+
+ /* determine which track to record to */
+ i = ev->dest.port;
+ if (i == port_count) {
+ if (ev->type == SND_SEQ_EVENT_USR0)
+ metronome_pattern(ev->time.tick);
+ return;
+ }
+ if (channel_split) {
+ i *= TRACKS_PER_PORT;
+ if (snd_seq_ev_is_channel_type(ev))
+ i += 1 + (ev->data.note.channel & 0xf);
+ }
+ if (i >= num_tracks)
+ return;
+ track = &tracks[i];
+
+ switch (ev->type) {
+ case SND_SEQ_EVENT_NOTEON:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_NOTE_ON | (ev->data.note.channel & 0xf));
+ add_byte(track, ev->data.note.note & 0x7f);
+ add_byte(track, ev->data.note.velocity & 0x7f);
+ break;
+ case SND_SEQ_EVENT_NOTEOFF:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_NOTE_OFF | (ev->data.note.channel & 0xf));
+ add_byte(track, ev->data.note.note & 0x7f);
+ add_byte(track, ev->data.note.velocity & 0x7f);
+ break;
+ case SND_SEQ_EVENT_KEYPRESS:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_NOTE_PRESSURE | (ev->data.note.channel & 0xf));
+ add_byte(track, ev->data.note.note & 0x7f);
+ add_byte(track, ev->data.note.velocity & 0x7f);
+ break;
+ case SND_SEQ_EVENT_CONTROLLER:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_CONTROL | (ev->data.control.channel & 0xf));
+ add_byte(track, ev->data.control.param & 0x7f);
+ add_byte(track, ev->data.control.value & 0x7f);
+ break;
+ case SND_SEQ_EVENT_PGMCHANGE:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_PGM_CHANGE | (ev->data.control.channel & 0xf));
+ add_byte(track, ev->data.control.value & 0x7f);
+ break;
+ case SND_SEQ_EVENT_CHANPRESS:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_CHANNEL_PRESSURE | (ev->data.control.channel & 0xf));
+ add_byte(track, ev->data.control.value & 0x7f);
+ break;
+ case SND_SEQ_EVENT_PITCHBEND:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_BENDER | (ev->data.control.channel & 0xf));
+ add_byte(track, (ev->data.control.value + 8192) & 0x7f);
+ add_byte(track, ((ev->data.control.value + 8192) >> 7) & 0x7f);
+ break;
+ case SND_SEQ_EVENT_CONTROL14:
+ /* create two commands for MSB and LSB */
+ delta_time(track, ev);
+ command(track, MIDI_CMD_CONTROL | (ev->data.control.channel & 0xf));
+ add_byte(track, ev->data.control.param & 0x7f);
+ add_byte(track, (ev->data.control.value >> 7) & 0x7f);
+ if ((ev->data.control.param & 0x7f) < 0x20) {
+ delta_time(track, ev);
+ /* running status */
+ add_byte(track, (ev->data.control.param & 0x7f) + 0x20);
+ add_byte(track, ev->data.control.value & 0x7f);
+ }
+ break;
+ case SND_SEQ_EVENT_NONREGPARAM:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_CONTROL | (ev->data.control.channel & 0xf));
+ add_byte(track, MIDI_CTL_NONREG_PARM_NUM_LSB);
+ add_byte(track, ev->data.control.param & 0x7f);
+ delta_time(track, ev);
+ add_byte(track, MIDI_CTL_NONREG_PARM_NUM_MSB);
+ add_byte(track, (ev->data.control.param >> 7) & 0x7f);
+ delta_time(track, ev);
+ add_byte(track, MIDI_CTL_MSB_DATA_ENTRY);
+ add_byte(track, (ev->data.control.value >> 7) & 0x7f);
+ delta_time(track, ev);
+ add_byte(track, MIDI_CTL_LSB_DATA_ENTRY);
+ add_byte(track, ev->data.control.value & 0x7f);
+ break;
+ case SND_SEQ_EVENT_REGPARAM:
+ delta_time(track, ev);
+ command(track, MIDI_CMD_CONTROL | (ev->data.control.channel & 0xf));
+ add_byte(track, MIDI_CTL_REGIST_PARM_NUM_LSB);
+ add_byte(track, ev->data.control.param & 0x7f);
+ delta_time(track, ev);
+ add_byte(track, MIDI_CTL_REGIST_PARM_NUM_MSB);
+ add_byte(track, (ev->data.control.param >> 7) & 0x7f);
+ delta_time(track, ev);
+ add_byte(track, MIDI_CTL_MSB_DATA_ENTRY);
+ add_byte(track, (ev->data.control.value >> 7) & 0x7f);
+ delta_time(track, ev);
+ add_byte(track, MIDI_CTL_LSB_DATA_ENTRY);
+ add_byte(track, ev->data.control.value & 0x7f);
+ break;
+#if 0 /* ignore */
+ case SND_SEQ_EVENT_SONGPOS:
+ case SND_SEQ_EVENT_SONGSEL:
+ case SND_SEQ_EVENT_QFRAME:
+ case SND_SEQ_EVENT_START:
+ case SND_SEQ_EVENT_CONTINUE:
+ case SND_SEQ_EVENT_STOP:
+ case SND_SEQ_EVENT_TUNE_REQUEST:
+ case SND_SEQ_EVENT_RESET:
+ case SND_SEQ_EVENT_SENSING:
+ break;
+#endif
+ case SND_SEQ_EVENT_SYSEX:
+ if (ev->data.ext.len == 0)
+ break;
+ delta_time(track, ev);
+ if (*(unsigned char*)ev->data.ext.ptr == 0xf0)
+ command(track, 0xf0), i = 1;
+ else
+ command(track, 0xf7), i = 0;
+ var_value(track, ev->data.ext.len - i);
+ for (; i < ev->data.ext.len; ++i)
+ add_byte(track, ((unsigned char*)ev->data.ext.ptr)[i]);
+ break;
+ default:
+ return;
+ }
+ track->used = 1;
+}
+
+static void finish_tracks(void)
+{
+ snd_seq_queue_status_t *queue_status;
+ int tick, i, err;
+
+ snd_seq_queue_status_alloca(&queue_status);
+
+ err = snd_seq_get_queue_status(seq, queue, queue_status);
+ check_snd("get queue status", err);
+ tick = snd_seq_queue_status_get_tick_time(queue_status);
+
+ /* make length of first track the recording length */
+ var_value(&tracks[0], tick - tracks[0].last_tick);
+ add_byte(&tracks[0], 0xff);
+ add_byte(&tracks[0], 0x2f);
+ var_value(&tracks[0], 0);
+
+ /* finish other tracks */
+ for (i = 1; i < num_tracks; ++i) {
+ var_value(&tracks[i], 0);
+ add_byte(&tracks[i], 0xff);
+ add_byte(&tracks[i], 0x2f);
+ var_value(&tracks[i], 0);
+ }
+}
+
+static void write_file(void)
+{
+ int used_tracks, time_division, i;
+ struct buffer *buf;
+
+ used_tracks = 0;
+ for (i = 0; i < num_tracks; ++i)
+ used_tracks += !!tracks[i].used;
+
+ /* header id and length */
+ fwrite("MThd\0\0\0\6", 1, 8, file);
+ /* type 0 or 1 */
+ fputc(0, file);
+ fputc(used_tracks > 1, file);
+ /* number of tracks */
+ fputc((used_tracks >> 8) & 0xff, file);
+ fputc(used_tracks & 0xff, file);
+ /* time division */
+ time_division = ticks;
+ if (smpte_timing)
+ time_division |= (0x100 - frames) << 8;
+ fputc(time_division >> 8, file);
+ fputc(time_division & 0xff, file);
+
+ for (i = 0; i < num_tracks; ++i) {
+ if (!tracks[i].used)
+ continue;
+ /* track id */
+ fwrite("MTrk", 1, 4, file);
+ /* data length */
+ fputc((tracks[i].size >> 24) & 0xff, file);
+ fputc((tracks[i].size >> 16) & 0xff, file);
+ fputc((tracks[i].size >> 8) & 0xff, file);
+ fputc(tracks[i].size & 0xff, file);
+ /* track contents */
+ for (buf = &tracks[i].first_buf; buf; buf = buf->next)
+ fwrite(buf->buf, 1, buf == tracks[i].cur_buf
+ ? tracks[i].cur_buf_size : BUFFER_SIZE, file);
+ }
+}
+
+static void list_ports(void)
+{
+ snd_seq_client_info_t *cinfo;
+ snd_seq_port_info_t *pinfo;
+
+ snd_seq_client_info_alloca(&cinfo);
+ snd_seq_port_info_alloca(&pinfo);
+
+ puts(" Port Client name Port name");
+
+ snd_seq_client_info_set_client(cinfo, -1);
+ while (snd_seq_query_next_client(seq, cinfo) >= 0) {
+ int client = snd_seq_client_info_get_client(cinfo);
+
+ if (client == SND_SEQ_CLIENT_SYSTEM)
+ continue; /* don't show system timer and announce ports */
+ snd_seq_port_info_set_client(pinfo, client);
+ snd_seq_port_info_set_port(pinfo, -1);
+ while (snd_seq_query_next_port(seq, pinfo) >= 0) {
+ /* port must understand MIDI messages */
+ if (!(snd_seq_port_info_get_type(pinfo)
+ & SND_SEQ_PORT_TYPE_MIDI_GENERIC))
+ continue;
+ /* we need both READ and SUBS_READ */
+ if ((snd_seq_port_info_get_capability(pinfo)
+ & (SND_SEQ_PORT_CAP_READ | SND_SEQ_PORT_CAP_SUBS_READ))
+ != (SND_SEQ_PORT_CAP_READ | SND_SEQ_PORT_CAP_SUBS_READ))
+ continue;
+ printf("%3d:%-3d %-32.32s %s\n",
+ snd_seq_port_info_get_client(pinfo),
+ snd_seq_port_info_get_port(pinfo),
+ snd_seq_client_info_get_name(cinfo),
+ snd_seq_port_info_get_name(pinfo));
+ }
+ }
+}
+
+static void help(const char *argv0)
+{
+ fprintf(stderr, "Usage: %s [options] outputfile\n"
+ "\nAvailable options:\n"
+ " -h,--help this help\n"
+ " -V,--version show version\n"
+ " -l,--list list input ports\n"
+ " -p,--port=client:port,... source port(s)\n"
+ " -b,--bpm=beats tempo in beats per minute\n"
+ " -f,--fps=frames resolution in frames per second (SMPTE)\n"
+ " -t,--ticks=ticks resolution in ticks per beat or frame\n"
+ " -s,--split-channels create a track for each channel\n"
+ " -m,--metronome=client:port play a metronome signal\n"
+ " -i,--timesig=nn:dd time signature\n",
+ argv0);
+}
+
+static void version(void)
+{
+ fputs("arecordmidi version " SND_UTIL_VERSION_STR "\n", stderr);
+}
+
+static void sighandler(int sig)
+{
+ stop = 1;
+}
+
+int main(int argc, char *argv[])
+{
+ static const char short_options[] = "hVlp:b:f:t:sdm:i:";
+ static const struct option long_options[] = {
+ {"help", 0, NULL, 'h'},
+ {"version", 0, NULL, 'V'},
+ {"list", 0, NULL, 'l'},
+ {"port", 1, NULL, 'p'},
+ {"bpm", 1, NULL, 'b'},
+ {"fps", 1, NULL, 'f'},
+ {"ticks", 1, NULL, 't'},
+ {"split-channels", 0, NULL, 's'},
+ {"dump", 0, NULL, 'd'},
+ {"metronome", 1, NULL, 'm'},
+ {"timesig", 1, NULL, 'i'},
+ { }
+ };
+
+ char *filename = NULL;
+ int do_list = 0;
+ struct pollfd *pfds;
+ int npfds;
+ int c, err;
+
+ init_seq();
+
+ while ((c = getopt_long(argc, argv, short_options,
+ long_options, NULL)) != -1) {
+ switch (c) {
+ case 'h':
+ help(argv[0]);
+ return 0;
+ case 'V':
+ version();
+ return 0;
+ case 'l':
+ do_list = 1;
+ break;
+ case 'p':
+ parse_ports(optarg);
+ break;
+ case 'b':
+ beats = atoi(optarg);
+ if (beats < 4 || beats > 6000)
+ fatal("Invalid tempo");
+ smpte_timing = 0;
+ break;
+ case 'f':
+ frames = atoi(optarg);
+ if (frames != 24 && frames != 25 &&
+ frames != 29 && frames != 30)
+ fatal("Invalid number of frames/s");
+ smpte_timing = 1;
+ break;
+ case 't':
+ ticks = atoi(optarg);
+ if (ticks < 1 || ticks > 0x7fff)
+ fatal("Invalid number of ticks");
+ break;
+ case 's':
+ channel_split = 1;
+ break;
+ case 'd':
+ fputs("The --dump option isn't supported anymore, use aseqdump instead.\n", stderr);
+ break;
+ case 'm':
+ init_metronome(optarg);
+ break;
+ case 'i':
+ time_signature(optarg);
+ break;
+ default:
+ help(argv[0]);
+ return 1;
+ }
+ }
+
+ if (do_list) {
+ list_ports();
+ return 0;
+ }
+
+ if (port_count < 1) {
+ fputs("Pleast specify a source port with --port.\n", stderr);
+ return 1;
+ }
+
+ if (!ticks)
+ ticks = smpte_timing ? 40 : 384;
+ if (smpte_timing && ticks > 0xff)
+ ticks = 0xff;
+
+ if (optind >= argc) {
+ fputs("Please specify a file to record to.\n", stderr);
+ return 1;
+ }
+ filename = argv[optind];
+
+ init_tracks();
+ create_queue();
+ create_ports();
+ connect_ports();
+ if (port_count > 1)
+ record_port_numbers();
+
+ /* record tempo */
+ if (!smpte_timing) {
+ int usecs_per_quarter = 60000000 / beats;
+ var_value(&tracks[0], 0); /* delta time */
+ add_byte(&tracks[0], 0xff);
+ add_byte(&tracks[0], 0x51);
+ var_value(&tracks[0], 3);
+ add_byte(&tracks[0], usecs_per_quarter >> 16);
+ add_byte(&tracks[0], usecs_per_quarter >> 8);
+ add_byte(&tracks[0], usecs_per_quarter);
+
+ /* time signature */
+ var_value(&tracks[0], 0); /* delta time */
+ add_byte(&tracks[0], 0xff);
+ add_byte(&tracks[0], 0x58);
+ var_value(&tracks[0], 4);
+ add_byte(&tracks[0], ts_num);
+ add_byte(&tracks[0], ts_dd);
+ add_byte(&tracks[0], 24); /* MIDI clocks per metronome click */
+ add_byte(&tracks[0], 8); /* notated 32nd-notes per MIDI quarter note */
+ }
+
+ /* always write at least one track */
+ tracks[0].used = 1;
+
+ file = fopen(filename, "wb");
+ if (!file)
+ fatal("Cannot open %s - %s", filename, strerror(errno));
+
+ err = snd_seq_start_queue(seq, queue, NULL);
+ check_snd("start queue", err);
+ snd_seq_drain_output(seq);
+
+ err = snd_seq_nonblock(seq, 1);
+ check_snd("set nonblock mode", err);
+
+ if (use_metronome) {
+ metronome_set_program();
+ metronome_pattern(0);
+ }
+
+ signal(SIGINT, sighandler);
+ signal(SIGTERM, sighandler);
+
+ npfds = snd_seq_poll_descriptors_count(seq, POLLIN);
+ pfds = alloca(sizeof(*pfds) * npfds);
+ for (;;) {
+ snd_seq_poll_descriptors(seq, pfds, npfds, POLLIN);
+ if (poll(pfds, npfds, -1) < 0)
+ break;
+ do {
+ snd_seq_event_t *event;
+ err = snd_seq_event_input(seq, &event);
+ if (err < 0)
+ break;
+ if (event)
+ record_event(event);
+ } while (err > 0);
+ if (stop)
+ break;
+ }
+
+ finish_tracks();
+ write_file();
+
+ fclose(file);
+ snd_seq_close(seq);
+ return 0;
+}
diff --git a/seq/aseqdump/Makefile.am b/seq/aseqdump/Makefile.am
new file mode 100644
index 0000000..d918d9f
--- /dev/null
+++ b/seq/aseqdump/Makefile.am
@@ -0,0 +1,5 @@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = aseqdump.1
+
+bin_PROGRAMS = aseqdump
+man_MANS = aseqdump.1
diff --git a/seq/aseqdump/Makefile.in b/seq/aseqdump/Makefile.in
new file mode 100644
index 0000000..d93a96c
--- /dev/null
+++ b/seq/aseqdump/Makefile.in
@@ -0,0 +1,645 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = aseqdump$(EXEEXT)
+subdir = seq/aseqdump
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+aseqdump_SOURCES = aseqdump.c
+aseqdump_OBJECTS = aseqdump.$(OBJEXT)
+aseqdump_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = aseqdump.c
+DIST_SOURCES = aseqdump.c
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = aseqdump.1
+man_MANS = aseqdump.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aseqdump/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign seq/aseqdump/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+aseqdump$(EXEEXT): $(aseqdump_OBJECTS) $(aseqdump_DEPENDENCIES) $(EXTRA_aseqdump_DEPENDENCIES)
+ @rm -f aseqdump$(EXEEXT)
+ $(LINK) $(aseqdump_OBJECTS) $(aseqdump_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aseqdump.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/seq/aseqdump/aseqdump.1 b/seq/aseqdump/aseqdump.1
new file mode 100644
index 0000000..f6f2aa9
--- /dev/null
+++ b/seq/aseqdump/aseqdump.1
@@ -0,0 +1,39 @@
+.TH ASEQDUMP 1 "19 Feb 2005"
+
+.SH NAME
+aseqdump \- show the events received at an ALSA sequencer port
+
+.SH SYNOPSIS
+.B aseqdump
+[\fI\-p client:port,...\fP]
+
+.SH DESCRIPTION
+.B aseqdump
+is a command-line utility that prints the sequencer events it receives as text.
+
+To stop receiving, press Ctrl+C.
+
+.SH OPTIONS
+
+.TP
+.I \-h,\-\-help
+Prints a list of options.
+
+.TP
+.I \-V,\-\-version
+Prints the current version.
+
+.TP
+.I \-l,\-\-list
+Prints a list of possible input ports.
+
+.TP
+.I \-p,\-\-port=client:port,...
+Sets the sequencer port(s) from which events are received.
+
+A client can be specified by its number, its name, or a prefix of its
+name. A port is specified by its number; for port 0 of a client, the
+":0" part of the port specification can be omitted.
+
+.SH AUTHOR
+Clemens Ladisch <clemens@ladisch.de>
diff --git a/seq/aseqdump/aseqdump.c b/seq/aseqdump/aseqdump.c
new file mode 100644
index 0000000..24c5d21
--- /dev/null
+++ b/seq/aseqdump/aseqdump.c
@@ -0,0 +1,438 @@
+/*
+ * aseqdump.c - show the events received at an ALSA sequencer port
+ *
+ * Copyright (c) 2005 Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <signal.h>
+#include <getopt.h>
+#include <sys/poll.h>
+#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "version.h"
+
+static snd_seq_t *seq;
+static int port_count;
+static snd_seq_addr_t *ports;
+static volatile sig_atomic_t stop = 0;
+
+
+/* prints an error message to stderr, and dies */
+static void fatal(const char *msg, ...)
+{
+ va_list ap;
+
+ va_start(ap, msg);
+ vfprintf(stderr, msg, ap);
+ va_end(ap);
+ fputc('\n', stderr);
+ exit(EXIT_FAILURE);
+}
+
+/* memory allocation error handling */
+static void check_mem(void *p)
+{
+ if (!p)
+ fatal("Out of memory");
+}
+
+/* error handling for ALSA functions */
+static void check_snd(const char *operation, int err)
+{
+ if (err < 0)
+ fatal("Cannot %s - %s", operation, snd_strerror(err));
+}
+
+static void init_seq(void)
+{
+ int err;
+
+ /* open sequencer */
+ err = snd_seq_open(&seq, "default", SND_SEQ_OPEN_DUPLEX, 0);
+ check_snd("open sequencer", err);
+
+ /* set our client's name */
+ err = snd_seq_set_client_name(seq, "aseqdump");
+ check_snd("set client name", err);
+}
+
+/* parses one or more port addresses from the string */
+static void parse_ports(const char *arg)
+{
+ char *buf, *s, *port_name;
+ int err;
+
+ /* make a copy of the string because we're going to modify it */
+ buf = strdup(arg);
+ check_mem(buf);
+
+ for (port_name = s = buf; s; port_name = s + 1) {
+ /* Assume that ports are separated by commas. We don't use
+ * spaces because those are valid in client names. */
+ s = strchr(port_name, ',');
+ if (s)
+ *s = '\0';
+
+ ++port_count;
+ ports = realloc(ports, port_count * sizeof(snd_seq_addr_t));
+ check_mem(ports);
+
+ err = snd_seq_parse_address(seq, &ports[port_count - 1], port_name);
+ if (err < 0)
+ fatal("Invalid port %s - %s", port_name, snd_strerror(err));
+ }
+
+ free(buf);
+}
+
+static void create_port(void)
+{
+ int err;
+
+ err = snd_seq_create_simple_port(seq, "aseqdump",
+ SND_SEQ_PORT_CAP_WRITE |
+ SND_SEQ_PORT_CAP_SUBS_WRITE,
+ SND_SEQ_PORT_TYPE_MIDI_GENERIC |
+ SND_SEQ_PORT_TYPE_APPLICATION);
+ check_snd("create port", err);
+}
+
+static void connect_ports(void)
+{
+ int i, err;
+
+ for (i = 0; i < port_count; ++i) {
+ err = snd_seq_connect_from(seq, 0, ports[i].client, ports[i].port);
+ if (err < 0)
+ fatal("Cannot connect from port %d:%d - %s",
+ ports[i].client, ports[i].port, snd_strerror(err));
+ }
+}
+
+static void dump_event(const snd_seq_event_t *ev)
+{
+ printf("%3d:%-3d ", ev->source.client, ev->source.port);
+ switch (ev->type) {
+ case SND_SEQ_EVENT_NOTEON:
+ if (ev->data.note.velocity)
+ printf("Note on %2d, note %d, velocity %d\n",
+ ev->data.note.channel, ev->data.note.note, ev->data.note.velocity);
+ else
+ printf("Note off %2d, note %d\n",
+ ev->data.note.channel, ev->data.note.note);
+ break;
+ case SND_SEQ_EVENT_NOTEOFF:
+ printf("Note off %2d, note %d, velocity %d\n",
+ ev->data.note.channel, ev->data.note.note, ev->data.note.velocity);
+ break;
+ case SND_SEQ_EVENT_KEYPRESS:
+ printf("Polyphonic aftertouch %2d, note %d, value %d\n",
+ ev->data.note.channel, ev->data.note.note, ev->data.note.velocity);
+ break;
+ case SND_SEQ_EVENT_CONTROLLER:
+ printf("Control change %2d, controller %d, value %d\n",
+ ev->data.control.channel, ev->data.control.param, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_PGMCHANGE:
+ printf("Program change %2d, program %d\n",
+ ev->data.control.channel, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_CHANPRESS:
+ printf("Channel aftertouch %2d, value %d\n",
+ ev->data.control.channel, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_PITCHBEND:
+ printf("Pitch bend %2d, value %d\n",
+ ev->data.control.channel, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_CONTROL14:
+ printf("Control change %2d, controller %d, value %5d\n",
+ ev->data.control.channel, ev->data.control.param, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_NONREGPARAM:
+ printf("Non-reg. parameter %2d, parameter %d, value %d\n",
+ ev->data.control.channel, ev->data.control.param, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_REGPARAM:
+ printf("Reg. parameter %2d, parameter %d, value %d\n",
+ ev->data.control.channel, ev->data.control.param, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_SONGPOS:
+ printf("Song position pointer value %d\n",
+ ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_SONGSEL:
+ printf("Song select value %d\n",
+ ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_QFRAME:
+ printf("MTC quarter frame %02xh\n",
+ ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_TIMESIGN:
+ // XXX how is this encoded?
+ printf("SMF time signature (%#010x)\n",
+ ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_KEYSIGN:
+ // XXX how is this encoded?
+ printf("SMF key signature (%#010x)\n",
+ ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_START:
+ if (ev->source.client == SND_SEQ_CLIENT_SYSTEM &&
+ ev->source.port == SND_SEQ_PORT_SYSTEM_TIMER)
+ printf("Queue start queue %d\n",
+ ev->data.queue.queue);
+ else
+ printf("Start\n");
+ break;
+ case SND_SEQ_EVENT_CONTINUE:
+ if (ev->source.client == SND_SEQ_CLIENT_SYSTEM &&
+ ev->source.port == SND_SEQ_PORT_SYSTEM_TIMER)
+ printf("Queue continue queue %d\n",
+ ev->data.queue.queue);
+ else
+ printf("Continue\n");
+ break;
+ case SND_SEQ_EVENT_STOP:
+ if (ev->source.client == SND_SEQ_CLIENT_SYSTEM &&
+ ev->source.port == SND_SEQ_PORT_SYSTEM_TIMER)
+ printf("Queue stop queue %d\n",
+ ev->data.queue.queue);
+ else
+ printf("Stop\n");
+ break;
+ case SND_SEQ_EVENT_SETPOS_TICK:
+ printf("Set tick queue pos. queue %d\n", ev->data.queue.queue);
+ break;
+ case SND_SEQ_EVENT_SETPOS_TIME:
+ printf("Set rt queue pos. queue %d\n", ev->data.queue.queue);
+ break;
+ case SND_SEQ_EVENT_TEMPO:
+ printf("Set queue tempo queue %d\n", ev->data.queue.queue);
+ break;
+ case SND_SEQ_EVENT_CLOCK:
+ printf("Clock\n");
+ break;
+ case SND_SEQ_EVENT_TICK:
+ printf("Tick\n");
+ break;
+ case SND_SEQ_EVENT_QUEUE_SKEW:
+ printf("Queue timer skew queue %d\n", ev->data.queue.queue);
+ break;
+ case SND_SEQ_EVENT_TUNE_REQUEST:
+ printf("Tune request\n");
+ break;
+ case SND_SEQ_EVENT_RESET:
+ printf("Reset\n");
+ break;
+ case SND_SEQ_EVENT_SENSING:
+ printf("Active Sensing\n");
+ break;
+ case SND_SEQ_EVENT_CLIENT_START:
+ printf("Client start client %d\n",
+ ev->data.addr.client);
+ break;
+ case SND_SEQ_EVENT_CLIENT_EXIT:
+ printf("Client exit client %d\n",
+ ev->data.addr.client);
+ break;
+ case SND_SEQ_EVENT_CLIENT_CHANGE:
+ printf("Client changed client %d\n",
+ ev->data.addr.client);
+ break;
+ case SND_SEQ_EVENT_PORT_START:
+ printf("Port start %d:%d\n",
+ ev->data.addr.client, ev->data.addr.port);
+ break;
+ case SND_SEQ_EVENT_PORT_EXIT:
+ printf("Port exit %d:%d\n",
+ ev->data.addr.client, ev->data.addr.port);
+ break;
+ case SND_SEQ_EVENT_PORT_CHANGE:
+ printf("Port changed %d:%d\n",
+ ev->data.addr.client, ev->data.addr.port);
+ break;
+ case SND_SEQ_EVENT_PORT_SUBSCRIBED:
+ printf("Port subscribed %d:%d -> %d:%d\n",
+ ev->data.connect.sender.client, ev->data.connect.sender.port,
+ ev->data.connect.dest.client, ev->data.connect.dest.port);
+ break;
+ case SND_SEQ_EVENT_PORT_UNSUBSCRIBED:
+ printf("Port unsubscribed %d:%d -> %d:%d\n",
+ ev->data.connect.sender.client, ev->data.connect.sender.port,
+ ev->data.connect.dest.client, ev->data.connect.dest.port);
+ break;
+ case SND_SEQ_EVENT_SYSEX:
+ {
+ unsigned int i;
+ printf("System exclusive ");
+ for (i = 0; i < ev->data.ext.len; ++i)
+ printf(" %02X", ((unsigned char*)ev->data.ext.ptr)[i]);
+ printf("\n");
+ }
+ break;
+ default:
+ printf("Event type %d\n", ev->type);
+ }
+}
+
+static void list_ports(void)
+{
+ snd_seq_client_info_t *cinfo;
+ snd_seq_port_info_t *pinfo;
+
+ snd_seq_client_info_alloca(&cinfo);
+ snd_seq_port_info_alloca(&pinfo);
+
+ puts(" Port Client name Port name");
+
+ snd_seq_client_info_set_client(cinfo, -1);
+ while (snd_seq_query_next_client(seq, cinfo) >= 0) {
+ int client = snd_seq_client_info_get_client(cinfo);
+
+ snd_seq_port_info_set_client(pinfo, client);
+ snd_seq_port_info_set_port(pinfo, -1);
+ while (snd_seq_query_next_port(seq, pinfo) >= 0) {
+ /* we need both READ and SUBS_READ */
+ if ((snd_seq_port_info_get_capability(pinfo)
+ & (SND_SEQ_PORT_CAP_READ | SND_SEQ_PORT_CAP_SUBS_READ))
+ != (SND_SEQ_PORT_CAP_READ | SND_SEQ_PORT_CAP_SUBS_READ))
+ continue;
+ printf("%3d:%-3d %-32.32s %s\n",
+ snd_seq_port_info_get_client(pinfo),
+ snd_seq_port_info_get_port(pinfo),
+ snd_seq_client_info_get_name(cinfo),
+ snd_seq_port_info_get_name(pinfo));
+ }
+ }
+}
+
+static void help(const char *argv0)
+{
+ printf("Usage: %s [options]\n"
+ "\nAvailable options:\n"
+ " -h,--help this help\n"
+ " -V,--version show version\n"
+ " -l,--list list input ports\n"
+ " -p,--port=client:port,... source port(s)\n",
+ argv0);
+}
+
+static void version(void)
+{
+ puts("aseqdump version " SND_UTIL_VERSION_STR);
+}
+
+static void sighandler(int sig)
+{
+ stop = 1;
+}
+
+int main(int argc, char *argv[])
+{
+ static const char short_options[] = "hVlp:";
+ static const struct option long_options[] = {
+ {"help", 0, NULL, 'h'},
+ {"version", 0, NULL, 'V'},
+ {"list", 0, NULL, 'l'},
+ {"port", 1, NULL, 'p'},
+ { }
+ };
+
+ int do_list = 0;
+ struct pollfd *pfds;
+ int npfds;
+ int c, err;
+
+ init_seq();
+
+ while ((c = getopt_long(argc, argv, short_options,
+ long_options, NULL)) != -1) {
+ switch (c) {
+ case 'h':
+ help(argv[0]);
+ return 0;
+ case 'V':
+ version();
+ return 0;
+ case 'l':
+ do_list = 1;
+ break;
+ case 'p':
+ parse_ports(optarg);
+ break;
+ default:
+ help(argv[0]);
+ return 1;
+ }
+ }
+ if (optind < argc) {
+ help(argv[0]);
+ return 1;
+ }
+
+ if (do_list) {
+ list_ports();
+ return 0;
+ }
+
+ create_port();
+ connect_ports();
+
+ err = snd_seq_nonblock(seq, 1);
+ check_snd("set nonblock mode", err);
+
+ if (port_count > 0)
+ printf("Waiting for data.");
+ else
+ printf("Waiting for data at port %d:0.",
+ snd_seq_client_id(seq));
+ printf(" Press Ctrl+C to end.\n");
+ printf("Source Event Ch Data\n");
+
+ signal(SIGINT, sighandler);
+ signal(SIGTERM, sighandler);
+
+ npfds = snd_seq_poll_descriptors_count(seq, POLLIN);
+ pfds = alloca(sizeof(*pfds) * npfds);
+ for (;;) {
+ snd_seq_poll_descriptors(seq, pfds, npfds, POLLIN);
+ if (poll(pfds, npfds, -1) < 0)
+ break;
+ do {
+ snd_seq_event_t *event;
+ err = snd_seq_event_input(seq, &event);
+ if (err < 0)
+ break;
+ if (event)
+ dump_event(event);
+ } while (err > 0);
+ fflush(stdout);
+ if (stop)
+ break;
+ }
+
+ snd_seq_close(seq);
+ return 0;
+}
diff --git a/seq/aseqnet/Makefile.am b/seq/aseqnet/Makefile.am
new file mode 100644
index 0000000..2ebc4a5
--- /dev/null
+++ b/seq/aseqnet/Makefile.am
@@ -0,0 +1,7 @@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = README.aseqnet aseqnet.1
+
+bin_PROGRAMS = aseqnet
+aseqnet_SOURCES = aseqnet.c
+aseqnet_LDADD = $(INTLLIBS)
+man_MANS = aseqnet.1
diff --git a/seq/aseqnet/Makefile.in b/seq/aseqnet/Makefile.in
new file mode 100644
index 0000000..7647fc6
--- /dev/null
+++ b/seq/aseqnet/Makefile.in
@@ -0,0 +1,648 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = aseqnet$(EXEEXT)
+subdir = seq/aseqnet
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_aseqnet_OBJECTS = aseqnet.$(OBJEXT)
+aseqnet_OBJECTS = $(am_aseqnet_OBJECTS)
+am__DEPENDENCIES_1 =
+aseqnet_DEPENDENCIES = $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(aseqnet_SOURCES)
+DIST_SOURCES = $(aseqnet_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+EXTRA_DIST = README.aseqnet aseqnet.1
+aseqnet_SOURCES = aseqnet.c
+aseqnet_LDADD = $(INTLLIBS)
+man_MANS = aseqnet.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aseqnet/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign seq/aseqnet/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+aseqnet$(EXEEXT): $(aseqnet_OBJECTS) $(aseqnet_DEPENDENCIES) $(EXTRA_aseqnet_DEPENDENCIES)
+ @rm -f aseqnet$(EXEEXT)
+ $(LINK) $(aseqnet_OBJECTS) $(aseqnet_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aseqnet.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/seq/aseqnet/README.aseqnet b/seq/aseqnet/README.aseqnet
new file mode 100644
index 0000000..bd0b68e
--- /dev/null
+++ b/seq/aseqnet/README.aseqnet
@@ -0,0 +1,53 @@
+================================================================
+ ALSA sequencer connectors over network
+ ver.0.1
+ Copyright (C) 1999-2000 Takashi Iwai
+================================================================
+
+* ASEQNET
+
+aseqnet is a sequencer client which sends/receives events over
+network. Suppose two hosts (hostA and hostB) connected by network.
+You need to run ALSA system on both hosts. Then, start aseqnet as a
+server on hostA:
+
+ hostA% aseqnet
+ sequencer opened: 128:0
+
+A user client 128 with port 0 was opened. (The client number may
+vary.) At next, start client on hostB. The argument is the hostname
+where server is running.
+
+ hostB% aseqnet hostA
+ sequencer opened: 132:0
+
+Now events sent to hostA:128:0 is transferred to hostB:132:0, and vice
+versa.
+
+You can connect these ports arbitrary to other sequencer ports.
+For example, connect hostB:132:0 to a MIDI output device 65:0. The
+aconnect utility can be used for this:
+
+ hostB% aconnect 132:0 65:0
+
+Events to hostA:128:0 will be delivered indirectly to hostB:65:0.
+You'll hear MIDI sounds as following:
+
+ hostA% pmidi -p 128:0 foo.mid
+
+The multiple clients may exist simultaneously. If hostC is connected
+as a client to hostA, events from from hostA are sent to all connected
+network clients, hostB and hostC. However, only one connection is
+allowed from a client to a server.
+
+To disconnect network, stop all clients before server by ctrl-C or
+sending signal to them. The server will automatically quit.
+
+The available options are:
+
+ -p port : specify the TCP port number or TCP service name.
+ Default value is 40002.
+ -s addr : explicit read-subscription to the given address
+ (client:addr).
+ -d addr : explicit write-subscription to the given address.
+ -v : verbose mode.
diff --git a/seq/aseqnet/aseqnet.1 b/seq/aseqnet/aseqnet.1
new file mode 100644
index 0000000..2cb6eb7
--- /dev/null
+++ b/seq/aseqnet/aseqnet.1
@@ -0,0 +1,80 @@
+.TH aseqnet 1 "January 1, 2000"
+.SH NAME
+aseqnet \- ALSA sequencer connectors over network
+
+.SH SYNOPSIS
+.B aseqnet
+[remotehost]
+
+.SH DESCRIPTION
+.B aseqnet
+is an ALSA sequencer client which sends and receives event packets
+over network.
+Suppose two hosts connected by network,
+.I hostA
+as a server
+and
+.I hostB
+as a client.
+The ALSA sequencer system must be running on both hosts.
+For creating the server port, run the following on hostA:
+.IP "" 4
+hostA% aseqnet
+.br
+sequencer opened: 128:0
+.PP
+Then a user client 128 with port 0 was opened on hostA.
+(The client number may vary.)
+For creating the (network-)client port, run
+.B aseqnet
+with the hostname of the server:
+.IP "" 4
+hostB% aseqnet hostA
+.br
+sequencer opened: 132:0
+.PP
+Now all events sent to hostA:128:0 are transferred to hostB:132:0, and vice
+versa.
+.PP
+The ports created by
+.B aseqnet
+can be connected arbitrary to other sequencer ports via
+.B aconnect(1).
+For example, to connect hostB:132:0 to a MIDI output device 65:0:
+.IP "" 4
+hostB% aconnect 132:0 65:0
+.PP
+Then events to hostA:128:0 will be delivered to hostB:65:0.
+The following command plays MIDI on
+.I hostB.
+.IP "" 4
+hostA% pmidi \-p 128:0 foo.mid
+.PP
+The multiple clients may exist simultaneously. If
+.I hostC
+is connected as a client to hostA, events from from hostA are sent
+to all connected network clients, i.e. hostB and hostC.
+However, only one connection is allowed from a client to a server.
+.PP
+To disconnect network, stop all clients before server by ctrl-C or
+sending signal to them. The server will automatically quit.
+
+.SH OPTIONS
+.TP
+.B \-p port
+Specify the TCP port number or TCP service name.
+.TP
+.B \-s addr
+Subscribe to the given address for read automatically.
+.TP
+.B \-d addr
+Subscribe to the given address for write automatically.
+.TP
+.B \-v
+Verbose mode.
+
+.SH "SEE ALSO"
+aconnect(1), pmidi(1)
+
+.SH AUTHOR
+Takashi Iwai <tiwai@suse.de>.
diff --git a/seq/aseqnet/aseqnet.c b/seq/aseqnet/aseqnet.c
new file mode 100644
index 0000000..70a1cfd
--- /dev/null
+++ b/seq/aseqnet/aseqnet.c
@@ -0,0 +1,609 @@
+/*
+ * network server/client for ALSA sequencer
+ * ver.0.1
+ *
+ * Copyright (C) 1999-2000 Takashi Iwai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <string.h>
+#include <netinet/in.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <locale.h>
+#include <alsa/asoundlib.h>
+#include <getopt.h>
+#include <signal.h>
+#include <assert.h>
+#include "aconfig.h"
+#include "gettext.h"
+
+/*
+ * prototypes
+ */
+static void usage(void);
+static void init_buf(void);
+static void init_pollfds(void);
+static void close_files(void);
+static void init_seq(char *source, char *dest);
+static int get_port(char *service);
+static void sigterm_exit(int sig);
+static void init_server(int port);
+static void init_client(char *server, int port);
+static void do_loop(void);
+static int copy_local_to_remote(void);
+static int copy_remote_to_local(int fd);
+
+/*
+ * default TCP port number
+ */
+#define DEFAULT_PORT 40002
+
+/*
+ * local input buffer
+ */
+static char *readbuf;
+static int max_rdlen;
+static char *writebuf;
+static int cur_wrlen, max_wrlen;
+
+#define MAX_BUF_EVENTS 200
+#define MAX_CONNECTION 10
+
+static snd_seq_t *handle;
+static struct pollfd *seqifds = NULL;
+static struct pollfd *seqofds = NULL;
+static struct pollfd *pollfds = NULL;
+static int seqifds_count = 0;
+static int seqofds_count = 0;
+static int pollfds_count = 0;
+static int sockfd, netfd[MAX_CONNECTION] = {[0 ... MAX_CONNECTION-1] = -1};
+static int max_connection;
+static int cur_connected;
+static int seq_port;
+
+static int server_mode;
+static int verbose = 0;
+static int info = 0;
+
+
+/*
+ * main routine
+ */
+
+static const struct option long_option[] = {
+ {"port", 1, NULL, 'p'},
+ {"source", 1, NULL, 's'},
+ {"dest", 1, NULL, 'd'},
+ {"help", 0, NULL, 'h'},
+ {"verbose", 0, NULL, 'v'},
+ {"info", 0, NULL, 'i'},
+ {NULL, 0, NULL, 0},
+};
+
+int main(int argc, char **argv)
+{
+ int c;
+ int port = DEFAULT_PORT;
+ char *source = NULL, *dest = NULL;
+
+#ifdef ENABLE_NLS
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+#endif
+
+ while ((c = getopt_long(argc, argv, "p:s:d:vi", long_option, NULL)) != -1) {
+ switch (c) {
+ case 'p':
+ if (isdigit(*optarg))
+ port = atoi(optarg);
+ else
+ port = get_port(optarg);
+ break;
+ case 's':
+ source = optarg;
+ break;
+ case 'd':
+ dest = optarg;
+ break;
+ case 'v':
+ verbose++;
+ break;
+ case 'i':
+ info++;
+ break;
+ default:
+ usage();
+ exit(1);
+ }
+ }
+
+ signal(SIGINT, sigterm_exit);
+ signal(SIGTERM, sigterm_exit);
+
+ init_buf();
+ init_seq(source, dest);
+
+ if (optind >= argc) {
+ server_mode = 1;
+ max_connection = MAX_CONNECTION;
+ init_pollfds();
+ init_server(port);
+ } else {
+ server_mode = 0;
+ max_connection = 1;
+ init_pollfds();
+ init_client(argv[optind], port);
+ }
+
+ do_loop();
+
+ close_files();
+
+ return 0;
+}
+
+
+/*
+ * print usage
+ */
+static void usage(void)
+{
+ printf(_("aseqnet - network client/server on ALSA sequencer\n"));
+ printf(_(" Copyright (C) 1999 Takashi Iwai\n"));
+ printf(_("usage:\n"));
+ printf(_(" server mode: aseqnet [-options]\n"));
+ printf(_(" client mode: aseqnet [-options] server_host\n"));
+ printf(_("options:\n"));
+ printf(_(" -p,--port # : specify TCP port (digit or service name)\n"));
+ printf(_(" -s,--source addr : read from given addr (client:port)\n"));
+ printf(_(" -d,--dest addr : write to given addr (client:port)\n"));
+ printf(_(" -v, --verbose : print verbose messages\n"));
+ printf(_(" -i, --info : print certain received events\n"));
+}
+
+
+/*
+ * allocate and initialize buffers
+ */
+static void init_buf(void)
+{
+ max_wrlen = MAX_BUF_EVENTS * sizeof(snd_seq_event_t);
+ max_rdlen = MAX_BUF_EVENTS * sizeof(snd_seq_event_t);
+ writebuf = malloc(max_wrlen);
+ readbuf = malloc(max_rdlen);
+ if (writebuf == NULL || readbuf == NULL) {
+ fprintf(stderr, _("can't malloc\n"));
+ exit(1);
+ }
+ memset(writebuf, 0, max_wrlen);
+ memset(readbuf, 0, max_rdlen);
+ cur_wrlen = 0;
+}
+
+/*
+ * allocate and initialize poll array
+ */
+static void init_pollfds(void)
+{
+ pollfds_count = seqifds_count + seqofds_count + 1 + max_connection;
+ pollfds = (struct pollfd *)calloc(pollfds_count, sizeof(struct pollfd));
+ assert(pollfds);
+}
+
+/*
+ * close all files
+ */
+static void close_files(void)
+{
+ int i;
+ if (verbose)
+ fprintf(stderr, _("closing files..\n"));
+ for (i = 0; i < max_connection; i++) {
+ if (netfd[i] >= 0)
+ close(netfd[i]);
+ }
+ if (sockfd >= 0)
+ close(sockfd);
+}
+
+
+/*
+ * initialize sequencer
+ */
+static void init_seq(char *source, char *dest)
+{
+ snd_seq_addr_t addr;
+ int err, counti, counto;
+
+ if (snd_seq_open(&handle, "default", SND_SEQ_OPEN_DUPLEX, 0) < 0) {
+ perror("snd_seq_open");
+ exit(1);
+ }
+ if (seqifds)
+ free(seqifds);
+ if (seqofds)
+ free(seqofds);
+ counti = seqifds_count = snd_seq_poll_descriptors_count(handle, POLLIN);
+ assert(counti > 0);
+ counto = seqofds_count = snd_seq_poll_descriptors_count(handle, POLLOUT);
+ assert(counto > 0);
+ seqifds = (struct pollfd *)calloc(counti, sizeof(struct pollfd));
+ assert(seqifds);
+ seqofds = (struct pollfd *)calloc(counto, sizeof(struct pollfd));
+ assert(seqofds);
+ err = snd_seq_poll_descriptors(handle, seqifds, counti, POLLIN);
+ assert(err == counti);
+ err = snd_seq_poll_descriptors(handle, seqofds, counto, POLLOUT);
+ assert(err == counto);
+
+ snd_seq_nonblock(handle, 1);
+
+ /* set client info */
+ if (server_mode)
+ snd_seq_set_client_name(handle, "Net Server");
+ else
+ snd_seq_set_client_name(handle, "Net Client");
+
+ /* create a port */
+ seq_port = snd_seq_create_simple_port(handle, "Network",
+ SND_SEQ_PORT_CAP_READ |
+ SND_SEQ_PORT_CAP_WRITE |
+ SND_SEQ_PORT_CAP_SUBS_READ |
+ SND_SEQ_PORT_CAP_SUBS_WRITE,
+ SND_SEQ_PORT_TYPE_MIDI_GENERIC);
+ if (seq_port < 0) {
+ perror("create seq port");
+ exit(1);
+ }
+ if (verbose)
+ fprintf(stderr, _("sequencer opened: %d:%d\n"),
+ snd_seq_client_id(handle), seq_port);
+
+ /* explicit subscriptions */
+ if (source) {
+ /* read subscription */
+ if (snd_seq_parse_address(handle, &addr, source) < 0) {
+ fprintf(stderr, _("invalid source address %s\n"), source);
+ exit(1);
+ }
+ if (snd_seq_connect_from(handle, seq_port, addr.client, addr.port)) {
+ perror("read subscription");
+ exit(1);
+ }
+ }
+ if (dest) {
+ /* write subscription */
+ if (snd_seq_parse_address(handle, &addr, dest) < 0) {
+ fprintf(stderr, _("invalid destination address %s\n"), dest);
+ exit(1);
+ }
+ if (snd_seq_connect_to(handle, seq_port, addr.client, addr.port)) {
+ perror("write subscription");
+ exit(1);
+ }
+ }
+}
+
+
+/*
+ * convert from string to TCP port number
+ */
+static int get_port(char *service)
+{
+ struct servent *sp;
+
+ if ((sp = getservbyname(service, "tcp")) == NULL){
+ fprintf(stderr, _("service '%s' is not found in /etc/services\n"), service);
+ return -1;
+ }
+ return sp->s_port;
+}
+
+/*
+ * signal handler
+ */
+static void sigterm_exit(int sig)
+{
+ close_files();
+ exit(1);
+}
+
+
+/*
+ * initialize network server
+ */
+static void init_server(int port)
+{
+ int i;
+ int curstate = 1;
+ struct sockaddr_in addr;
+
+ memset(&addr, 0, sizeof(addr));
+
+ addr.sin_family = AF_INET;
+ addr.sin_addr.s_addr = INADDR_ANY;
+ addr.sin_port = htons(port);
+
+ sockfd = socket(AF_INET, SOCK_STREAM, 0);
+ if (sockfd < 0) {
+ perror("create socket");
+ exit(1);
+ }
+ setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, &curstate, sizeof(curstate));
+ /* the return value is ignored.. */
+
+ if (bind(sockfd, (struct sockaddr *)&addr, sizeof(addr)) < 0) {
+ perror("can't bind");
+ exit(1);
+ }
+
+ if (listen(sockfd, 5) < 0) {
+ perror("can't listen");
+ exit(1);
+ }
+
+ cur_connected = 0;
+ for (i = 0; i < max_connection; i++)
+ netfd[i] = -1;
+}
+
+/*
+ * start connection on server
+ */
+static void start_connection(void)
+{
+ struct sockaddr_in addr;
+ int i;
+ socklen_t addr_len;
+
+ for (i = 0; i < max_connection; i++) {
+ if (netfd[i] < 0)
+ break;
+ }
+ if (i >= max_connection) {
+ fprintf(stderr, _("too many connections!\n"));
+ exit(1);
+ }
+ memset(&addr, 0, sizeof(addr));
+ addr_len = sizeof(addr);
+ netfd[i] = accept(sockfd, (struct sockaddr *)&addr, &addr_len);
+ if (netfd[i] < 0) {
+ perror("accept");
+ exit(1);
+ }
+ if (verbose)
+ fprintf(stderr, _("accepted[%d]\n"), netfd[i]);
+ cur_connected++;
+}
+
+/*
+ * initialize network client
+ */
+static void init_client(char *server, int port)
+{
+ struct sockaddr_in addr;
+ struct hostent *host;
+ int curstate = 1;
+ int fd;
+
+ if ((fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0){
+ perror("create socket");
+ exit(1);
+ }
+ if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &curstate, sizeof(curstate)) < 0) {
+ perror("setsockopt");
+ exit(1);
+ }
+ if ((host = gethostbyname(server)) == NULL){
+ fprintf(stderr, _("can't get address %s\n"), server);
+ exit(1);
+ }
+ addr.sin_port = htons(port);
+ addr.sin_family = AF_INET;
+ memcpy(&addr.sin_addr, host->h_addr, host->h_length);
+ if (connect(fd, (struct sockaddr *)&addr, sizeof(addr)) < 0) {
+ perror("connect");
+ exit(1);
+ }
+ if (verbose)
+ fprintf(stderr, _("ok.. connected\n"));
+ netfd[0] = fd;
+ cur_connected = 1;
+}
+
+/*
+ * event loop
+ */
+static void do_loop(void)
+{
+ int i, rc, width;
+ int seqifd_ptr, sockfd_ptr = -1, netfd_ptr;
+
+ for (;;) {
+ memset(pollfds, 0, pollfds_count * sizeof(struct pollfd));
+ seqifd_ptr = 0;
+ memcpy(pollfds, seqifds, sizeof(*seqifds)*(width = seqifds_count));
+ if (server_mode) {
+ sockfd_ptr = width;
+ pollfds[width].fd = sockfd;
+ pollfds[width].events = POLLIN;
+ width++;
+ }
+ netfd_ptr = width;
+ for (i = 0; i < max_connection; i++) {
+ if (netfd[i] >= 0) {
+ pollfds[width].fd = netfd[i];
+ pollfds[width].events = POLLIN;
+ width++;
+ }
+ }
+ do {
+ rc = poll(pollfds, width, -1);
+ } while (rc <= 0 && errno == EINTR);
+ if (rc <= 0) {
+ perror("poll");
+ exit(1);
+ }
+ if (server_mode) {
+ if (pollfds[sockfd_ptr].revents & (POLLIN|POLLOUT))
+ start_connection();
+ }
+ for (i = 0; i < seqifds_count; i++)
+ if (pollfds[seqifd_ptr + i].revents & (POLLIN|POLLOUT)) {
+ if (copy_local_to_remote())
+ return;
+ break;
+ }
+ for (i = 0; i < max_connection; i++) {
+ if (netfd[i] < 0)
+ continue;
+ if (pollfds[netfd_ptr + i].revents & (POLLIN|POLLOUT)) {
+ if (copy_remote_to_local(netfd[i])) {
+ netfd[i] = -1;
+ cur_connected--;
+ if (cur_connected <= 0)
+ return;
+ }
+ }
+ }
+ }
+}
+
+
+/*
+ * flush write buffer - send data to the socket
+ */
+static void flush_writebuf(void)
+{
+ if (cur_wrlen) {
+ int i;
+ for (i = 0; i < max_connection; i++) {
+ if (netfd[i] >= 0)
+ write(netfd[i], writebuf, cur_wrlen);
+ }
+ cur_wrlen = 0;
+ }
+}
+
+/*
+ * get space from write buffer
+ */
+static char *get_writebuf(int len)
+{
+ char *buf;
+ if (cur_wrlen + len >= max_wrlen)
+ flush_writebuf();
+ buf = writebuf + cur_wrlen;
+ cur_wrlen += len;
+ return buf;
+}
+
+static void print_event(snd_seq_event_t *ev)
+{
+ switch (ev->type) {
+ case SND_SEQ_EVENT_CONTROLLER:
+ printf(_("Channel %2d: Control event : %5d\n"),
+ ev->data.control.channel, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_PITCHBEND:
+ printf(_("Channel %2d: Pitchbender : %5d\n"),
+ ev->data.control.channel, ev->data.control.value);
+ break;
+ case SND_SEQ_EVENT_NOTEON:
+ printf(_("Channel %2d: Note On event : %5d\n"),
+ ev->data.control.channel, ev->data.note.note);
+ break;
+ case SND_SEQ_EVENT_NOTEOFF:
+ printf(_("Channel %2d: Note Off event: %5d\n"),
+ ev->data.control.channel, ev->data.note.note);
+ break;
+ }
+}
+
+#define EVENT_PACKET_SIZE 32
+
+/*
+ * copy events from sequencer to port(s)
+ */
+static int copy_local_to_remote(void)
+{
+ int rc;
+ snd_seq_event_t *ev;
+ char *buf;
+
+ while ((rc = snd_seq_event_input(handle, &ev)) >= 0 && ev) {
+ if (ev->type >= SND_SEQ_EVENT_CLIENT_START &&
+ ! snd_seq_ev_is_variable_type(ev)) {
+ snd_seq_free_event(ev);
+ continue;
+ }
+ if (snd_seq_ev_is_variable(ev)) {
+ int len;
+ len = EVENT_PACKET_SIZE + ev->data.ext.len;
+ buf = get_writebuf(len);
+ memcpy(buf, ev, sizeof(snd_seq_event_t));
+ memcpy(buf + EVENT_PACKET_SIZE, ev->data.ext.ptr, ev->data.ext.len);
+ } else {
+ buf = get_writebuf(EVENT_PACKET_SIZE);
+ memcpy(buf, ev, EVENT_PACKET_SIZE);
+ }
+ if (info)
+ print_event(ev);
+ snd_seq_free_event(ev);
+ }
+ flush_writebuf();
+ return 0;
+}
+
+/*
+ * copy events from a port to sequencer
+ */
+static int copy_remote_to_local(int fd)
+{
+ int count;
+ char *buf;
+ snd_seq_event_t *ev;
+
+ count = read(fd, readbuf, MAX_BUF_EVENTS * sizeof(snd_seq_event_t));
+ buf = readbuf;
+
+ if (count == 0) {
+ if (verbose)
+ fprintf(stderr, _("disconnected\n"));
+ return 1;
+ }
+
+ while (count > 0) {
+ ev = (snd_seq_event_t*)buf;
+ buf += EVENT_PACKET_SIZE;
+ count -= EVENT_PACKET_SIZE;
+ if (snd_seq_ev_is_variable(ev) && ev->data.ext.len > 0) {
+ ev->data.ext.ptr = buf;
+ buf += ev->data.ext.len;
+ count -= ev->data.ext.len;
+ }
+ snd_seq_ev_set_direct(ev);
+ snd_seq_ev_set_source(ev, seq_port);
+ snd_seq_ev_set_subs(ev);
+ if (info)
+ print_event(ev);
+ snd_seq_event_output(handle, ev);
+ }
+
+ snd_seq_drain_output(handle);
+ return 0;
+}
+
diff --git a/speaker-test/Android.mk b/speaker-test/Android.mk
new file mode 100644
index 0000000..f0ab1a7
--- /dev/null
+++ b/speaker-test/Android.mk
@@ -0,0 +1,13 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := speaker-test
+LOCAL_MODULE_TAGS := eng
+LOCAL_SRC_FILES := pink.c \
+ speaker-test.c
+LOCAL_SHARED_LIBRARIES := libasound
+LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
+LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
+
+include $(BUILD_EXECUTABLE)
diff --git a/speaker-test/Makefile.am b/speaker-test/Makefile.am
new file mode 100644
index 0000000..e3551bc
--- /dev/null
+++ b/speaker-test/Makefile.am
@@ -0,0 +1,9 @@
+INCLUDES = -I$(top_srcdir)/include
+SUBDIRS= samples
+LDADD = $(LIBINTL) -lm
+
+bin_PROGRAMS = speaker-test
+speaker_test_SOURCES = speaker-test.c pink.c
+man_MANS = speaker-test.1
+EXTRA_DIST = readme.txt speaker-test.1 pink.h
+
diff --git a/speaker-test/Makefile.in b/speaker-test/Makefile.in
new file mode 100644
index 0000000..95360ca
--- /dev/null
+++ b/speaker-test/Makefile.in
@@ -0,0 +1,779 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = speaker-test$(EXEEXT)
+subdir = speaker-test
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_speaker_test_OBJECTS = speaker-test.$(OBJEXT) pink.$(OBJEXT)
+speaker_test_OBJECTS = $(am_speaker_test_OBJECTS)
+speaker_test_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+speaker_test_DEPENDENCIES = $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(speaker_test_SOURCES)
+DIST_SOURCES = $(speaker_test_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+INCLUDES = -I$(top_srcdir)/include
+SUBDIRS = samples
+LDADD = $(LIBINTL) -lm
+speaker_test_SOURCES = speaker-test.c pink.c
+man_MANS = speaker-test.1
+EXTRA_DIST = readme.txt speaker-test.1 pink.h
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign speaker-test/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign speaker-test/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+speaker-test$(EXEEXT): $(speaker_test_OBJECTS) $(speaker_test_DEPENDENCIES) $(EXTRA_speaker_test_DEPENDENCIES)
+ @rm -f speaker-test$(EXEEXT)
+ $(LINK) $(speaker_test_OBJECTS) $(speaker_test_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pink.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/speaker-test.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+cscopelist-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @list='$(MANS)'; if test -n "$$list"; then \
+ list=`for p in $$list; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+ if test -n "$$list" && \
+ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+ echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
+ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+ echo " typically 'make maintainer-clean' will remove them" >&2; \
+ exit 1; \
+ else :; fi; \
+ else :; fi
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
+ cscopelist-recursive ctags-recursive install-am install-strip \
+ tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic cscopelist cscopelist-recursive ctags \
+ ctags-recursive distclean distclean-compile distclean-generic \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-binPROGRAMS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-man1 install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-man uninstall-man1
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/speaker-test/NOTICE b/speaker-test/NOTICE
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/speaker-test/NOTICE
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/speaker-test/pink.c b/speaker-test/pink.c
new file mode 100644
index 0000000..ef30755
--- /dev/null
+++ b/speaker-test/pink.c
@@ -0,0 +1,96 @@
+/*
+ patest_pink.c
+
+ generate Pink Noise using Gardner method.
+ Optimization suggested by James McCartney uses a tree
+ to select which random value to replace.
+
+ x x x x x x x x x x x x x x x x
+ x x x x x x x x
+ x x x x
+ x x
+ x
+
+ Tree is generated by counting trailing zeros in an increasing index.
+ When the index is zero, no random number is selected.
+
+ This program uses the Portable Audio library which is under development.
+ For more information see: http://www.audiomulch.com/portaudio/
+
+ Author: Phil Burk, http://www.softsynth.com
+
+ Revision History:
+
+ Copyleft 1999 Phil Burk - No rights reserved.
+*/
+
+#include <stdio.h>
+#include <math.h>
+#include "pink.h"
+
+/************************************************************/
+/* Calculate pseudo-random 32 bit number based on linear congruential method. */
+static unsigned long generate_random_number( void )
+{
+ static unsigned long rand_seed = 22222; /* Change this for different random sequences. */
+ rand_seed = (rand_seed * 196314165) + 907633515;
+ return rand_seed;
+}
+
+/* Setup PinkNoise structure for N rows of generators. */
+void initialize_pink_noise( pink_noise_t *pink, int num_rows )
+{
+ int i;
+ long pmax;
+ pink->pink_index = 0;
+ pink->pink_index_mask = (1<<num_rows) - 1;
+/* Calculate maximum possible signed random value. Extra 1 for white noise always added. */
+ pmax = (num_rows + 1) * (1<<(PINK_RANDOM_BITS-1));
+ pink->pink_scalar = 1.0f / pmax;
+/* Initialize rows. */
+ for( i=0; i<num_rows; i++ ) pink->pink_rows[i] = 0;
+ pink->pink_running_sum = 0;
+}
+
+/* generate Pink noise values between -1.0 and +1.0 */
+float generate_pink_noise_sample( pink_noise_t *pink )
+{
+ long new_random;
+ long sum;
+ float output;
+
+/* Increment and mask index. */
+ pink->pink_index = (pink->pink_index + 1) & pink->pink_index_mask;
+
+/* If index is zero, don't update any random values. */
+ if( pink->pink_index != 0 )
+ {
+ /* Determine how many trailing zeros in PinkIndex. */
+ /* This algorithm will hang if n==0 so test first. */
+ int num_zeros = 0;
+ int n = pink->pink_index;
+ while( (n & 1) == 0 )
+ {
+ n = n >> 1;
+ num_zeros++;
+ }
+
+ /* Replace the indexed ROWS random value.
+ * Subtract and add back to Running_sum instead of adding all the random
+ * values together. Only one changes each time.
+ */
+ pink->pink_running_sum -= pink->pink_rows[num_zeros];
+ new_random = ((long)generate_random_number()) >> PINK_RANDOM_SHIFT;
+ pink->pink_running_sum += new_random;
+ pink->pink_rows[num_zeros] = new_random;
+ }
+
+/* Add extra white noise value. */
+ new_random = ((long)generate_random_number()) >> PINK_RANDOM_SHIFT;
+ sum = pink->pink_running_sum + new_random;
+
+/* Scale to range of -1.0 to 0.9999. */
+ output = pink->pink_scalar * sum;
+
+ return output;
+}
diff --git a/speaker-test/pink.h b/speaker-test/pink.h
new file mode 100644
index 0000000..0d17f7a
--- /dev/null
+++ b/speaker-test/pink.h
@@ -0,0 +1,15 @@
+#define PINK_MAX_RANDOM_ROWS (30)
+#define PINK_RANDOM_BITS (24)
+#define PINK_RANDOM_SHIFT ((sizeof(long)*8)-PINK_RANDOM_BITS)
+
+typedef struct
+{
+ long pink_rows[PINK_MAX_RANDOM_ROWS];
+ long pink_running_sum; /* Used to optimize summing of generators. */
+ int pink_index; /* Incremented each sample. */
+ int pink_index_mask; /* Index wrapped by ANDing with this mask. */
+ float pink_scalar; /* Used to scale within range of -1.0 to +1.0 */
+} pink_noise_t;
+
+void initialize_pink_noise( pink_noise_t *pink, int num_rows );
+float generate_pink_noise_sample( pink_noise_t *pink );
diff --git a/speaker-test/readme.txt b/speaker-test/readme.txt
new file mode 100644
index 0000000..6774fe0
--- /dev/null
+++ b/speaker-test/readme.txt
@@ -0,0 +1,12 @@
+To make or build just type
+
+make
+
+To test: -
+1) Just stereo sound from one stereo jack: -
+./speaker-test -Dplug:front -c2
+2) A 4 speaker setup from two stereo jacks: -
+./speaker-test -Dplug:surround40 -c4
+3) A 5.1 speaker setup from three stereo jacks: -
+./speaker-test -Dplug:surround51 -c6
+
diff --git a/speaker-test/samples/Front_Center.wav b/speaker-test/samples/Front_Center.wav
new file mode 100644
index 0000000..4f12180
--- /dev/null
+++ b/speaker-test/samples/Front_Center.wav
Binary files differ
diff --git a/speaker-test/samples/Front_Left.wav b/speaker-test/samples/Front_Left.wav
new file mode 100644
index 0000000..9d6ebdd
--- /dev/null
+++ b/speaker-test/samples/Front_Left.wav
Binary files differ
diff --git a/speaker-test/samples/Front_Right.wav b/speaker-test/samples/Front_Right.wav
new file mode 100644
index 0000000..441565c
--- /dev/null
+++ b/speaker-test/samples/Front_Right.wav
Binary files differ
diff --git a/speaker-test/samples/Makefile.am b/speaker-test/samples/Makefile.am
new file mode 100644
index 0000000..8cc3546
--- /dev/null
+++ b/speaker-test/samples/Makefile.am
@@ -0,0 +1,20 @@
+sounddir = $(datadir)/sounds/alsa
+wav_files = Front_Left.wav \
+ Rear_Center.wav \
+ Rear_Right.wav \
+ Side_Right.wav \
+ Front_Center.wav \
+ Front_Right.wav \
+ Noise.wav \
+ Rear_Left.wav \
+ Side_Left.wav
+sound_DATA = $(wav_files)
+
+alsadir = $(datadir)/alsa/speaker-test
+cfg_files = sample_map.csv
+
+alsa_DATA = $(cfg_files)
+
+EXTRA_DIST = \
+ $(wav_files) \
+ $(cfg_files)
diff --git a/speaker-test/samples/Makefile.in b/speaker-test/samples/Makefile.in
new file mode 100644
index 0000000..558ce12
--- /dev/null
+++ b/speaker-test/samples/Makefile.in
@@ -0,0 +1,498 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = speaker-test/samples
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(alsadir)" "$(DESTDIR)$(sounddir)"
+DATA = $(alsa_DATA) $(sound_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+sounddir = $(datadir)/sounds/alsa
+wav_files = Front_Left.wav \
+ Rear_Center.wav \
+ Rear_Right.wav \
+ Side_Right.wav \
+ Front_Center.wav \
+ Front_Right.wav \
+ Noise.wav \
+ Rear_Left.wav \
+ Side_Left.wav
+
+sound_DATA = $(wav_files)
+alsadir = $(datadir)/alsa/speaker-test
+cfg_files = sample_map.csv
+alsa_DATA = $(cfg_files)
+EXTRA_DIST = \
+ $(wav_files) \
+ $(cfg_files)
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign speaker-test/samples/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign speaker-test/samples/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-alsaDATA: $(alsa_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(alsa_DATA)'; test -n "$(alsadir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(alsadir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(alsadir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(alsadir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(alsadir)" || exit $$?; \
+ done
+
+uninstall-alsaDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(alsa_DATA)'; test -n "$(alsadir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(alsadir)'; $(am__uninstall_files_from_dir)
+install-soundDATA: $(sound_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(sound_DATA)'; test -n "$(sounddir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(sounddir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(sounddir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sounddir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(sounddir)" || exit $$?; \
+ done
+
+uninstall-soundDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sound_DATA)'; test -n "$(sounddir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(sounddir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(alsadir)" "$(DESTDIR)$(sounddir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-alsaDATA install-soundDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-alsaDATA uninstall-soundDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-alsaDATA install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-soundDATA install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am uninstall uninstall-alsaDATA uninstall-am \
+ uninstall-soundDATA
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/speaker-test/samples/Noise.wav b/speaker-test/samples/Noise.wav
new file mode 100644
index 0000000..1898d34
--- /dev/null
+++ b/speaker-test/samples/Noise.wav
Binary files differ
diff --git a/speaker-test/samples/Rear_Center.wav b/speaker-test/samples/Rear_Center.wav
new file mode 100644
index 0000000..ee2c6da
--- /dev/null
+++ b/speaker-test/samples/Rear_Center.wav
Binary files differ
diff --git a/speaker-test/samples/Rear_Left.wav b/speaker-test/samples/Rear_Left.wav
new file mode 100644
index 0000000..57d0311
--- /dev/null
+++ b/speaker-test/samples/Rear_Left.wav
Binary files differ
diff --git a/speaker-test/samples/Rear_Right.wav b/speaker-test/samples/Rear_Right.wav
new file mode 100644
index 0000000..692e646
--- /dev/null
+++ b/speaker-test/samples/Rear_Right.wav
Binary files differ
diff --git a/speaker-test/samples/Side_Left.wav b/speaker-test/samples/Side_Left.wav
new file mode 100644
index 0000000..9741f2c
--- /dev/null
+++ b/speaker-test/samples/Side_Left.wav
Binary files differ
diff --git a/speaker-test/samples/Side_Right.wav b/speaker-test/samples/Side_Right.wav
new file mode 100644
index 0000000..b0e5b3a
--- /dev/null
+++ b/speaker-test/samples/Side_Right.wav
Binary files differ
diff --git a/speaker-test/samples/sample_map.csv b/speaker-test/samples/sample_map.csv
new file mode 100644
index 0000000..20d8ed2
--- /dev/null
+++ b/speaker-test/samples/sample_map.csv
@@ -0,0 +1,2 @@
+0, "Front Left", "/usr/share/alsa/samples/Front_Left.wav"
+1, "Front Right", "/usr/share/alsa/samples/Front_Right.wav"
diff --git a/speaker-test/speaker-test.1 b/speaker-test/speaker-test.1
new file mode 100644
index 0000000..26d9882
--- /dev/null
+++ b/speaker-test/speaker-test.1
@@ -0,0 +1,178 @@
+.\" -*- nroff -*-
+.\" macros
+.de EX \" Begin Example
+. IP
+. ft CW
+. nf
+. ne \\$1
+..
+.de EE \" End Example
+. ft P
+. fi
+. PP
+..
+.TH SPEAKER\-TEST 1 "April 2nd, 2011" speaker\-test
+.SH NAME
+speaker\-test \- command\-line speaker test tone generator for ALSA
+.SH SYNOPSIS
+.B speaker\-test [\-options]
+
+.SH DESCRIPTION
+\fBspeaker\-test\fP generates a tone that can be used to test the speakers of a computer.
+
+\fBspeaker\-test\fP by default will test the \fIdefault\fP device. If you
+want to test another sound device you will have first to get a list of
+all of the sound cards in your system and the devices associated with
+those cards. Notice that there might be for example, one device for
+analog sound, one for digital sound and one for HDMI sound.
+To get the list of available cards and devices you can run \fBaplay \-L\fR.
+
+.P \fBaplay\fR's output will be similar to this one:
+
+.nf
+$ aplay \-L
+null
+ Discard all samples (playback) or generate zero samples (capture)
+default:CARD=ICH5
+ Intel ICH5, Intel ICH5
+ Default Audio Device
+front:CARD=ICH5,DEV=0
+ Intel ICH5, Intel ICH5
+ Front speakers
+surround40:CARD=ICH5,DEV=0
+ Intel ICH5, Intel ICH5
+ 4.0 Surround output to Front and Rear speakers
+(...)
+.fi
+
+.P Each of the devices is listed in the beginning of the definition so,
+in the above example, there are four devices listed: null, default, front
+and surround40. So, if you want to test the last device you can
+run \fBspeaker\-test \-Dsurround40:ICH5 \-c 6\fR. The \fB\-c\fR option will
+indicate that the six audio channels in the device have to be tested.
+
+
+
+
+
+.SH OPTIONS
+
+.TP
+\fB\-c\fP | \fB\-\-channels\fP \fINUM\fP
+\fINUM\fP channels in stream
+
+.TP
+\fB\-D\fP | \fB\-\-device\fP \fINAME\fP
+PCM device name \fINAME\fP
+
+.TP
+\fB\-f\fP | \fB\-\-frequency\fP \fIFREQ\fP
+sine wave of \fIFREQ\fP Hz
+
+.TP
+\fB\-\-help\fP
+Print usage help
+
+.TP
+\fB\-b\fP | \fB\-\-buffer\fP \fITIME\fP
+Use buffer size of \fITIME\fP microseconds.
+When 0 is given, use the maximal buffer size.
+The default value is 0.
+
+.TP
+\fB\-p\fP | \fB\-\-period\fP \fITIME\fP
+Use period size of \fITIME\fP microseconds.
+When 0 is given, the periods given by \fB\-P\fP option is used.
+The default value is 0.
+
+.TP
+\fB\-P\fP | \fB\-\-nperiods\fP \fPPERIODS\fP
+Use number of periods. The default value is 4.
+
+.TP
+\fB\-r\fP | \fB\-\-rate\fP \fIRATE\fP
+stream of \fIRATE\fP Hz
+
+.TP
+\fB\-t\fP | \fB\-\-test\fP \fBpink\fP|\fBsine\fP|\fBwav\fP
+\fB\-t pink\fP means use pink noise (default).
+
+Pink noise is perceptually uniform noise -- that is, it sounds like every frequency at once. If you can hear any tone it may indicate resonances in your speaker system or room.
+
+\fB\-t sine\fP means to use sine wave.
+
+\fB\-t wav\fP means to play WAV files, either pre-defined files or given via \fB\-w\fP option.
+
+You can pass the number from 1 to 3 as a backward compatibility.
+
+.TP
+\fB\-l\fP | \fB\-\-nloops\fP \fBCOUNT\fP
+
+Specifies the number of loops. Zero means to run infinitely.
+
+When \fB\-s\fP option below with a valid channel is given, \fBspeaker\-test\fP will perform
+always a single-shot without looping.
+
+.TP
+\fB\-s\fP | \fB\-\-speaker\fP \fBCHANNEL\fP
+Do a single-shot speaker test for the given channel. The channel number starts from 1.
+The channel number corresponds to left, right, rear-left, rear-right, center, LFE,
+side-left, side-right, and so on.
+
+For example, when 1 is passed, it tests the left channel only once rather than both channels
+with looping.
+
+.TP
+\fB\-w\fP | \fB\-\-wavfile\fP
+Use the given WAV file for the playback instead of pre-defined WAV files.
+
+.TP
+\fB\-W\fP | \fB\-\-wavdir\fP
+Specify the directory containing WAV files for playback.
+The default path is \fI/usr/share/sounds/alsa\fP.
+
+.TP
+\fB\-m\fP | \fB\-\-chmap\fP
+Pass the channel map to override.
+If the playback in a specific channel order or channel positions is
+required, pass the channel position strings to this option.
+
+.SH USAGE EXAMPLES
+
+Produce stereo sound from one stereo jack:
+.EX
+ speaker\-test \-Dplug:front \-c2
+.EE
+
+Produce 4 speaker sound from two stereo jacks:
+.EX
+ speaker\-test \-Dplug:surround40 \-c4
+.EE
+
+Produce 5.1 speaker sound from three stereo jacks:
+.EX
+ speaker\-test \-Dplug:surround51 \-c6
+.EE
+
+To send a nice low 75Hz tone to the Woofer and then exit without touching any other speakers:
+.EX
+ speaker\-test \-Dplug:surround51 \-c6 \-s1 \-f75
+.EE
+
+To do a 2\-speaker test using the spdif (coax or optical) output:
+.EX
+ speaker\-test \-Dplug:spdif \-c2
+.EE
+
+Play in the order of front\-right and front-left from the front PCM
+.EX
+ speaker\-test \-Dplug:front \-c2 \-mFR,FL
+.EE
+
+.SH SEE ALSO
+.BR aplay(1)
+
+.SH AUTHOR
+The speaker\-test program was written by James Courtier-Dutton.
+Pink noise support was added by Nathan Hurst.
+Further extensions by Takashi Iwai.
diff --git a/speaker-test/speaker-test.c b/speaker-test/speaker-test.c
new file mode 100644
index 0000000..d35065f
--- /dev/null
+++ b/speaker-test/speaker-test.c
@@ -0,0 +1,1235 @@
+/*
+ * Copyright (C) 2000-2004 James Courtier-Dutton
+ * Copyright (C) 2005 Nathan Hurst
+ *
+ * This file is part of the speaker-test tool.
+ *
+ * This small program sends a simple sinusoidal wave to your speakers.
+ *
+ * speaker-test is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * speaker-test is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ *
+ * Main program by James Courtier-Dutton (including some source code fragments from the alsa project.)
+ * Some cleanup from Daniel Caujolle-Bert <segfault@club-internet.fr>
+ * Pink noise option added Nathan Hurst,
+ * based on generator by Phil Burk (pink.c)
+ *
+ * Changelog:
+ * 0.0.8 Added support for pink noise output.
+ * Changelog:
+ * 0.0.7 Added support for more than 6 channels.
+ * Changelog:
+ * 0.0.6 Added support for different sample formats.
+ *
+ * $Id: speaker_test.c,v 1.00 2003/11/26 19:43:38 jcdutton Exp $
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sched.h>
+#include <errno.h>
+#include <getopt.h>
+#include <inttypes.h>
+#include <ctype.h>
+#include <byteswap.h>
+#include <signal.h>
+
+#define ALSA_PCM_NEW_HW_PARAMS_API
+#define ALSA_PCM_NEW_SW_PARAMS_API
+#include <alsa/asoundlib.h>
+#include <sys/time.h>
+#include <math.h>
+#include "pink.h"
+#include "aconfig.h"
+#include "gettext.h"
+#include "version.h"
+
+#ifdef ENABLE_NLS
+#include <locale.h>
+#endif
+
+#ifdef SND_CHMAP_API_VERSION
+#define CONFIG_SUPPORT_CHMAP 1
+#endif
+
+enum {
+ TEST_PINK_NOISE = 1,
+ TEST_SINE,
+ TEST_WAV,
+ TEST_PATTERN,
+};
+
+#define MAX_CHANNELS 16
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define COMPOSE_ID(a,b,c,d) ((a) | ((b)<<8) | ((c)<<16) | ((d)<<24))
+#define LE_SHORT(v) (v)
+#define LE_INT(v) (v)
+#define BE_SHORT(v) bswap_16(v)
+#define BE_INT(v) bswap_32(v)
+#else /* __BIG_ENDIAN */
+#define COMPOSE_ID(a,b,c,d) ((d) | ((c)<<8) | ((b)<<16) | ((a)<<24))
+#define LE_SHORT(v) bswap_16(v)
+#define LE_INT(v) bswap_32(v)
+#define BE_SHORT(v) (v)
+#define BE_INT(v) (v)
+#endif
+
+static char *device = "default"; /* playback device */
+static snd_pcm_format_t format = SND_PCM_FORMAT_S16; /* sample format */
+static unsigned int rate = 48000; /* stream rate */
+static unsigned int channels = 1; /* count of channels */
+static unsigned int speaker = 0; /* count of channels */
+static unsigned int buffer_time = 0; /* ring buffer length in us */
+static unsigned int period_time = 0; /* period time in us */
+static unsigned int nperiods = 4; /* number of periods */
+static double freq = 440.0; /* sinusoidal wave frequency in Hz */
+static int test_type = TEST_PINK_NOISE; /* Test type. 1 = noise, 2 = sine wave */
+static pink_noise_t pink;
+static snd_pcm_uframes_t buffer_size;
+static snd_pcm_uframes_t period_size;
+static const char *given_test_wav_file = NULL;
+static char *wav_file_dir = SOUNDSDIR;
+static int debug = 0;
+static int in_aborting = 0;
+static snd_pcm_t *pcm_handle = NULL;
+
+#ifdef CONFIG_SUPPORT_CHMAP
+static snd_pcm_chmap_t *channel_map;
+static int channel_map_set;
+#endif
+
+static const char *const channel_name[MAX_CHANNELS] = {
+ /* 0 */ N_("Front Left"),
+ /* 1 */ N_("Front Right"),
+ /* 2 */ N_("Rear Left"),
+ /* 3 */ N_("Rear Right"),
+ /* 4 */ N_("Center"),
+ /* 5 */ N_("LFE"),
+ /* 6 */ N_("Side Left"),
+ /* 7 */ N_("Side Right"),
+ /* 8 */ N_("Channel 9"),
+ /* 9 */ N_("Channel 10"),
+ /* 10 */ N_("Channel 11"),
+ /* 11 */ N_("Channel 12"),
+ /* 12 */ N_("Channel 13"),
+ /* 13 */ N_("Channel 14"),
+ /* 14 */ N_("Channel 15"),
+ /* 15 */ N_("Channel 16")
+};
+
+static const int channels4[] = {
+ 0, /* Front Left */
+ 1, /* Front Right */
+ 3, /* Rear Right */
+ 2, /* Rear Left */
+};
+static const int channels6[] = {
+ 0, /* Front Left */
+ 4, /* Center */
+ 1, /* Front Right */
+ 3, /* Rear Right */
+ 2, /* Rear Left */
+ 5, /* LFE */
+};
+static const int channels8[] = {
+ 0, /* Front Left */
+ 4, /* Center */
+ 1, /* Front Right */
+ 7, /* Side Right */
+ 3, /* Rear Right */
+ 2, /* Rear Left */
+ 6, /* Side Left */
+ 5, /* LFE */
+};
+
+static int get_mapped_channel(int chn)
+{
+#ifdef CONFIG_SUPPORT_CHMAP
+ static const int maps[MAX_CHANNELS] = {
+ SND_CHMAP_FL,
+ SND_CHMAP_FR,
+ SND_CHMAP_RL,
+ SND_CHMAP_RR,
+ SND_CHMAP_FC,
+ SND_CHMAP_LFE,
+ SND_CHMAP_SL,
+ SND_CHMAP_SR,
+ };
+
+ if (channel_map && maps[chn]) {
+ int i;
+ for (i = 0; i < channel_map->channels; i++) {
+ if (channel_map->pos[i] == maps[chn])
+ return i;
+ }
+ }
+#endif
+ return chn;
+}
+
+static int get_speaker_channel(int chn)
+{
+#ifdef CONFIG_SUPPORT_CHMAP
+ if (channel_map_set)
+ return chn;
+#endif
+
+ switch (channels) {
+ case 4:
+ chn = channels4[chn];
+ break;
+ case 6:
+ chn = channels6[chn];
+ break;
+ case 8:
+ chn = channels8[chn];
+ break;
+ }
+
+ return get_mapped_channel(chn);
+}
+
+static const char *get_channel_name(int chn)
+{
+#ifdef CONFIG_SUPPORT_CHMAP
+ if (channel_map_set && chn < channel_map->channels) {
+ const char *name = snd_pcm_chmap_long_name(channel_map->pos[chn]);
+ return name ? name : "Unknown";
+ }
+#endif
+ return gettext(channel_name[chn]);
+}
+
+static const int supported_formats[] = {
+ SND_PCM_FORMAT_S8,
+ SND_PCM_FORMAT_S16_LE,
+ SND_PCM_FORMAT_S16_BE,
+ SND_PCM_FORMAT_FLOAT_LE,
+ SND_PCM_FORMAT_S32_LE,
+ SND_PCM_FORMAT_S32_BE,
+ -1
+};
+
+static void generate_sine(uint8_t *frames, int channel, int count, double *_phase) {
+ double phase = *_phase;
+ double max_phase = 1.0 / freq;
+ double step = 1.0 / (double)rate;
+ double res;
+ float fres;
+ int chn;
+ int32_t ires;
+ int8_t *samp8 = (int8_t*) frames;
+ int16_t *samp16 = (int16_t*) frames;
+ int32_t *samp32 = (int32_t*) frames;
+ float *samp_f = (float*) frames;
+
+ while (count-- > 0) {
+ for(chn=0;chn<channels;chn++) {
+ switch (format) {
+ case SND_PCM_FORMAT_S8:
+ if (chn==channel) {
+ res = (sin((phase * 2 * M_PI) / max_phase - M_PI)) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp8++ = ires >> 24;
+ } else {
+ *samp8++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S16_LE:
+ if (chn==channel) {
+ res = (sin((phase * 2 * M_PI) / max_phase - M_PI)) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp16++ = LE_SHORT(ires >> 16);
+ } else {
+ *samp16++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S16_BE:
+ if (chn==channel) {
+ res = (sin((phase * 2 * M_PI) / max_phase - M_PI)) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp16++ = BE_SHORT(ires >> 16);
+ } else {
+ *samp16++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_FLOAT_LE:
+ if (chn==channel) {
+ res = (sin((phase * 2 * M_PI) / max_phase - M_PI)) * 0.75 ; /* Don't use MAX volume */
+ fres = res;
+ *samp_f++ = fres;
+ } else {
+ *samp_f++ = 0.0;
+ }
+ break;
+ case SND_PCM_FORMAT_S32_LE:
+ if (chn==channel) {
+ res = (sin((phase * 2 * M_PI) / max_phase - M_PI)) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp32++ = LE_INT(ires);
+ } else {
+ *samp32++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S32_BE:
+ if (chn==channel) {
+ res = (sin((phase * 2 * M_PI) / max_phase - M_PI)) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp32++ = BE_INT(ires);
+ } else {
+ *samp32++ = 0;
+ }
+ break;
+ default:
+ ;
+ }
+ }
+
+ phase += step;
+ if (phase >= max_phase)
+ phase -= max_phase;
+ }
+
+ *_phase = phase;
+}
+
+/* Pink noise is a better test than sine wave because we can tell
+ * where pink noise is coming from more easily that a sine wave.
+ */
+
+
+static void generate_pink_noise( uint8_t *frames, int channel, int count) {
+ double res;
+ int chn;
+ int32_t ires;
+ int8_t *samp8 = (int8_t*) frames;
+ int16_t *samp16 = (int16_t*) frames;
+ int32_t *samp32 = (int32_t*) frames;
+
+ while (count-- > 0) {
+ for(chn=0;chn<channels;chn++) {
+ switch (format) {
+ case SND_PCM_FORMAT_S8:
+ if (chn==channel) {
+ res = generate_pink_noise_sample(&pink) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp8++ = ires >> 24;
+ } else {
+ *samp8++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S16_LE:
+ if (chn==channel) {
+ res = generate_pink_noise_sample(&pink) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp16++ = LE_SHORT(ires >> 16);
+ } else {
+ *samp16++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S16_BE:
+ if (chn==channel) {
+ res = generate_pink_noise_sample(&pink) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp16++ = BE_SHORT(ires >> 16);
+ } else {
+ *samp16++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S32_LE:
+ if (chn==channel) {
+ res = generate_pink_noise_sample(&pink) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp32++ = LE_INT(ires);
+ } else {
+ *samp32++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S32_BE:
+ if (chn==channel) {
+ res = generate_pink_noise_sample(&pink) * 0x03fffffff; /* Don't use MAX volume */
+ ires = res;
+ *samp32++ = BE_INT(ires);
+ } else {
+ *samp32++ = 0;
+ }
+ break;
+ default:
+ ;
+ }
+ }
+ }
+}
+
+/*
+ * useful for tests
+ */
+static void generate_pattern(uint8_t *frames, int channel, int count, int *_pattern) {
+ int pattern = *_pattern;
+ int chn;
+ int8_t *samp8 = (int8_t*) frames;
+ int16_t *samp16 = (int16_t*) frames;
+ int32_t *samp32 = (int32_t*) frames;
+ float *samp_f = (float*) frames;
+
+ while (count-- > 0) {
+ for(chn=0;chn<channels;chn++,pattern++) {
+ switch (format) {
+ case SND_PCM_FORMAT_S8:
+ if (chn==channel) {
+ *samp8++ = pattern & 0xff;
+ } else {
+ *samp8++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S16_LE:
+ if (chn==channel) {
+ *samp16++ = LE_SHORT(pattern & 0xfffff);
+ } else {
+ *samp16++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S16_BE:
+ if (chn==channel) {
+ *samp16++ = BE_SHORT(pattern & 0xffff);
+ } else {
+ *samp16++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_FLOAT_LE:
+ if (chn==channel) {
+ *samp_f++ = LE_INT(((double)pattern) / INT32_MAX);
+ } else {
+ *samp_f++ = 0.0;
+ }
+ break;
+ case SND_PCM_FORMAT_S32_LE:
+ if (chn==channel) {
+ *samp32++ = LE_INT(pattern);
+ } else {
+ *samp32++ = 0;
+ }
+ break;
+ case SND_PCM_FORMAT_S32_BE:
+ if (chn==channel) {
+ *samp32++ = BE_INT(pattern);
+ } else {
+ *samp32++ = 0;
+ }
+ break;
+ default:
+ ;
+ }
+ }
+ }
+
+ *_pattern = pattern;
+}
+
+static int set_hwparams(snd_pcm_t *handle, snd_pcm_hw_params_t *params, snd_pcm_access_t access) {
+ unsigned int rrate;
+ int err;
+ snd_pcm_uframes_t period_size_min;
+ snd_pcm_uframes_t period_size_max;
+ snd_pcm_uframes_t buffer_size_min;
+ snd_pcm_uframes_t buffer_size_max;
+
+ /* choose all parameters */
+ err = snd_pcm_hw_params_any(handle, params);
+ if (err < 0) {
+ fprintf(stderr, _("Broken configuration for playback: no configurations available: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ /* set the interleaved read/write format */
+ err = snd_pcm_hw_params_set_access(handle, params, access);
+ if (err < 0) {
+ fprintf(stderr, _("Access type not available for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ /* set the sample format */
+ err = snd_pcm_hw_params_set_format(handle, params, format);
+ if (err < 0) {
+ fprintf(stderr, _("Sample format not available for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ /* set the count of channels */
+ err = snd_pcm_hw_params_set_channels(handle, params, channels);
+ if (err < 0) {
+ fprintf(stderr, _("Channels count (%i) not available for playbacks: %s\n"), channels, snd_strerror(err));
+ return err;
+ }
+
+ /* set the stream rate */
+ rrate = rate;
+ err = snd_pcm_hw_params_set_rate(handle, params, rate, 0);
+ if (err < 0) {
+ fprintf(stderr, _("Rate %iHz not available for playback: %s\n"), rate, snd_strerror(err));
+ return err;
+ }
+
+ if (rrate != rate) {
+ fprintf(stderr, _("Rate doesn't match (requested %iHz, get %iHz, err %d)\n"), rate, rrate, err);
+ return -EINVAL;
+ }
+
+ printf(_("Rate set to %iHz (requested %iHz)\n"), rrate, rate);
+ /* set the buffer time */
+ err = snd_pcm_hw_params_get_buffer_size_min(params, &buffer_size_min);
+ err = snd_pcm_hw_params_get_buffer_size_max(params, &buffer_size_max);
+ err = snd_pcm_hw_params_get_period_size_min(params, &period_size_min, NULL);
+ err = snd_pcm_hw_params_get_period_size_max(params, &period_size_max, NULL);
+ printf(_("Buffer size range from %lu to %lu\n"),buffer_size_min, buffer_size_max);
+ printf(_("Period size range from %lu to %lu\n"),period_size_min, period_size_max);
+ if (period_time > 0) {
+ printf(_("Requested period time %u us\n"), period_time);
+ err = snd_pcm_hw_params_set_period_time_near(handle, params, &period_time, NULL);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set period time %u us for playback: %s\n"),
+ period_time, snd_strerror(err));
+ return err;
+ }
+ }
+ if (buffer_time > 0) {
+ printf(_("Requested buffer time %u us\n"), buffer_time);
+ err = snd_pcm_hw_params_set_buffer_time_near(handle, params, &buffer_time, NULL);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set buffer time %u us for playback: %s\n"),
+ buffer_time, snd_strerror(err));
+ return err;
+ }
+ }
+ if (! buffer_time && ! period_time) {
+ buffer_size = buffer_size_max;
+ if (! period_time)
+ buffer_size = (buffer_size / nperiods) * nperiods;
+ printf(_("Using max buffer size %lu\n"), buffer_size);
+ err = snd_pcm_hw_params_set_buffer_size_near(handle, params, &buffer_size);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set buffer size %lu for playback: %s\n"),
+ buffer_size, snd_strerror(err));
+ return err;
+ }
+ }
+ if (! buffer_time || ! period_time) {
+ printf(_("Periods = %u\n"), nperiods);
+ err = snd_pcm_hw_params_set_periods_near(handle, params, &nperiods, NULL);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set nperiods %u for playback: %s\n"),
+ nperiods, snd_strerror(err));
+ return err;
+ }
+ }
+
+ /* write the parameters to device */
+ err = snd_pcm_hw_params(handle, params);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set hw params for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ snd_pcm_hw_params_get_buffer_size(params, &buffer_size);
+ snd_pcm_hw_params_get_period_size(params, &period_size, NULL);
+ printf(_("was set period_size = %lu\n"),period_size);
+ printf(_("was set buffer_size = %lu\n"),buffer_size);
+ if (2*period_size > buffer_size) {
+ fprintf(stderr, _("buffer to small, could not use\n"));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int set_swparams(snd_pcm_t *handle, snd_pcm_sw_params_t *swparams) {
+ int err;
+
+ /* get the current swparams */
+ err = snd_pcm_sw_params_current(handle, swparams);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to determine current swparams for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ /* start the transfer when a buffer is full */
+ err = snd_pcm_sw_params_set_start_threshold(handle, swparams, buffer_size);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set start threshold mode for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ /* allow the transfer when at least period_size frames can be processed */
+ err = snd_pcm_sw_params_set_avail_min(handle, swparams, period_size);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set avail min for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ /* write the parameters to the playback device */
+ err = snd_pcm_sw_params(handle, swparams);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set sw params for playback: %s\n"), snd_strerror(err));
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SUPPORT_CHMAP
+static int config_chmap(snd_pcm_t *handle, const char *mapstr)
+{
+ int err;
+
+ if (mapstr) {
+ channel_map = snd_pcm_chmap_parse_string(mapstr);
+ if (!channel_map) {
+ fprintf(stderr, _("Unable to parse channel map string: %s\n"), mapstr);
+ return -EINVAL;
+ }
+ err = snd_pcm_set_chmap(handle, channel_map);
+ if (err < 0) {
+ fprintf(stderr, _("Unable to set channel map: %s\n"), mapstr);
+ return err;
+ }
+ channel_map_set = 1;
+ return 0;
+ }
+
+ channel_map = snd_pcm_get_chmap(handle);
+ return 0;
+}
+#endif
+
+/*
+ * Underrun and suspend recovery
+ */
+
+static int xrun_recovery(snd_pcm_t *handle, int err) {
+ if (err == -EPIPE) { /* under-run */
+ err = snd_pcm_prepare(handle);
+ if (err < 0)
+ fprintf(stderr, _("Can't recovery from underrun, prepare failed: %s\n"), snd_strerror(err));
+ return 0;
+ }
+ else if (err == -ESTRPIPE) {
+
+ while ((err = snd_pcm_resume(handle)) == -EAGAIN)
+ sleep(1); /* wait until the suspend flag is released */
+
+ if (err < 0) {
+ err = snd_pcm_prepare(handle);
+ if (err < 0)
+ fprintf(stderr, _("Can't recovery from suspend, prepare failed: %s\n"), snd_strerror(err));
+ }
+
+ return 0;
+ }
+
+ return err;
+}
+
+/*
+ * Handle WAV files
+ */
+
+static const char *wav_file[MAX_CHANNELS];
+static int wav_file_size[MAX_CHANNELS];
+
+struct wave_header {
+ struct {
+ uint32_t magic;
+ uint32_t length;
+ uint32_t type;
+ } hdr;
+ struct {
+ uint32_t type;
+ uint32_t length;
+ } chunk1;
+ struct {
+ uint16_t format;
+ uint16_t channels;
+ uint32_t rate;
+ uint32_t bytes_per_sec;
+ uint16_t sample_size;
+ uint16_t sample_bits;
+ } body;
+ struct {
+ uint32_t type;
+ uint32_t length;
+ } chunk;
+};
+
+#define WAV_RIFF COMPOSE_ID('R','I','F','F')
+#define WAV_WAVE COMPOSE_ID('W','A','V','E')
+#define WAV_FMT COMPOSE_ID('f','m','t',' ')
+#define WAV_DATA COMPOSE_ID('d','a','t','a')
+#define WAV_PCM_CODE 1
+
+static const char *search_for_file(const char *name)
+{
+ char *file;
+ if (*name == '/')
+ return strdup(name);
+ file = malloc(strlen(wav_file_dir) + strlen(name) + 2);
+ if (file)
+ sprintf(file, "%s/%s", wav_file_dir, name);
+ return file;
+}
+
+static int check_wav_file(int channel, const char *name)
+{
+ struct wave_header header;
+ int fd;
+
+ wav_file[channel] = search_for_file(name);
+ if (! wav_file[channel]) {
+ fprintf(stderr, _("No enough memory\n"));
+ return -ENOMEM;
+ }
+
+ if ((fd = open(wav_file[channel], O_RDONLY)) < 0) {
+ fprintf(stderr, _("Cannot open WAV file %s\n"), wav_file[channel]);
+ return -EINVAL;
+ }
+ if (read(fd, &header, sizeof(header)) < (int)sizeof(header)) {
+ fprintf(stderr, _("Invalid WAV file %s\n"), wav_file[channel]);
+ goto error;
+ }
+
+ if (header.hdr.magic != WAV_RIFF || header.hdr.type != WAV_WAVE) {
+ fprintf(stderr, _("Not a WAV file: %s\n"), wav_file[channel]);
+ goto error;
+ }
+ if (header.body.format != LE_SHORT(WAV_PCM_CODE)) {
+ fprintf(stderr, _("Unsupported WAV format %d for %s\n"),
+ LE_SHORT(header.body.format), wav_file[channel]);
+ goto error;
+ }
+ if (header.body.channels != LE_SHORT(1)) {
+ fprintf(stderr, _("%s is not a mono stream (%d channels)\n"),
+ wav_file[channel], LE_SHORT(header.body.channels));
+ goto error;
+ }
+ if (header.body.rate != LE_INT(rate)) {
+ fprintf(stderr, _("Sample rate doesn't match (%d) for %s\n"),
+ LE_INT(header.body.rate), wav_file[channel]);
+ goto error;
+ }
+ if (header.body.sample_bits != LE_SHORT(16)) {
+ fprintf(stderr, _("Unsupported sample format bits %d for %s\n"),
+ LE_SHORT(header.body.sample_bits), wav_file[channel]);
+ goto error;
+ }
+ if (header.chunk.type != WAV_DATA) {
+ fprintf(stderr, _("Invalid WAV file %s\n"), wav_file[channel]);
+ goto error;
+ }
+ wav_file_size[channel] = LE_INT(header.chunk.length);
+ close(fd);
+ return 0;
+
+ error:
+ close(fd);
+ return -EINVAL;
+}
+
+static int setup_wav_file(int chn)
+{
+ static const char *const wavs[MAX_CHANNELS] = {
+ "Front_Left.wav",
+ "Front_Right.wav",
+ "Rear_Left.wav",
+ "Rear_Right.wav",
+ "Front_Center.wav",
+ "Rear_Center.wav", /* FIXME: should be "Bass" or so */
+ "Side_Left.wav",
+ "Side_Right.wav",
+ "Channel_9.wav",
+ "Channel_10.wav",
+ "Channel_11.wav",
+ "Channel_12.wav",
+ "Channel_13.wav",
+ "Channel_14.wav",
+ "Channel_15.wav",
+ "Channel_16.wav"
+ };
+
+ if (given_test_wav_file)
+ return check_wav_file(chn, given_test_wav_file);
+
+#ifdef CONFIG_SUPPORT_CHMAP
+ if (channel_map_set && chn < channel_map->channels) {
+ int channel = channel_map->pos[chn] - SND_CHMAP_FL;
+ if (channel >= 0 && channel < MAX_CHANNELS)
+ return check_wav_file(chn, wavs[channel]);
+ }
+#endif
+
+ return check_wav_file(chn, wavs[chn]);
+}
+
+static int read_wav(uint16_t *buf, int channel, int offset, int bufsize)
+{
+ static FILE *wavfp = NULL;
+ int size;
+
+ if (in_aborting)
+ return -EFAULT;
+
+ if (! wav_file[channel]) {
+ fprintf(stderr, _("Undefined channel %d\n"), channel);
+ return -EINVAL;
+ }
+
+ if (offset >= wav_file_size[channel])
+ return 0; /* finished */
+
+ if (! offset) {
+ if (wavfp)
+ fclose(wavfp);
+ wavfp = fopen(wav_file[channel], "r");
+ if (! wavfp)
+ return -errno;
+ if (fseek(wavfp, sizeof(struct wave_header), SEEK_SET) < 0)
+ return -errno;
+ }
+ if (offset + bufsize > wav_file_size[channel])
+ bufsize = wav_file_size[channel] - offset;
+ bufsize /= channels;
+ for (size = 0; size < bufsize; size += 2) {
+ int chn;
+ for (chn = 0; chn < channels; chn++) {
+ if (chn == channel) {
+ if (fread(buf, 2, 1, wavfp) != 1)
+ return size;
+ }
+ else
+ *buf = 0;
+ buf++;
+ }
+ }
+ return size;
+}
+
+
+/*
+ * Transfer method - write only
+ */
+
+static int write_buffer(snd_pcm_t *handle, uint8_t *ptr, int cptr)
+{
+ int err;
+
+ while (cptr > 0 && !in_aborting) {
+
+ err = snd_pcm_writei(handle, ptr, cptr);
+
+ if (err == -EAGAIN)
+ continue;
+
+ if (err < 0) {
+ fprintf(stderr, _("Write error: %d,%s\n"), err, snd_strerror(err));
+ if ((err = xrun_recovery(handle, err)) < 0) {
+ fprintf(stderr, _("xrun_recovery failed: %d,%s\n"), err, snd_strerror(err));
+ return err;
+ }
+ break; /* skip one period */
+ }
+
+ ptr += snd_pcm_frames_to_bytes(handle, err);
+ cptr -= err;
+ }
+ return 0;
+}
+
+static int write_loop(snd_pcm_t *handle, int channel, int periods, uint8_t *frames)
+{
+ double phase = 0;
+ int pattern = 0;
+ int err, n;
+
+ fflush(stdout);
+ if (test_type == TEST_WAV) {
+ int bufsize = snd_pcm_frames_to_bytes(handle, period_size);
+ n = 0;
+ while ((err = read_wav((uint16_t *)frames, channel, n, bufsize)) > 0 && !in_aborting) {
+ n += err;
+ if ((err = write_buffer(handle, frames,
+ snd_pcm_bytes_to_frames(handle, err * channels))) < 0)
+ break;
+ }
+ if (buffer_size > n && !in_aborting) {
+ snd_pcm_drain(handle);
+ snd_pcm_prepare(handle);
+ }
+ return err;
+ }
+
+
+ if (periods <= 0)
+ periods = 1;
+
+ for(n = 0; n < periods && !in_aborting; n++) {
+ if (test_type == TEST_PINK_NOISE)
+ generate_pink_noise(frames, channel, period_size);
+ else if (test_type == TEST_PATTERN)
+ generate_pattern(frames, channel, period_size, &pattern);
+ else
+ generate_sine(frames, channel, period_size, &phase);
+
+ if ((err = write_buffer(handle, frames, period_size)) < 0)
+ return err;
+ }
+ if (buffer_size > n * period_size && !in_aborting) {
+ snd_pcm_drain(handle);
+ snd_pcm_prepare(handle);
+ }
+ return 0;
+}
+
+static int prg_exit(int code)
+{
+ if (pcm_handle)
+ snd_pcm_close(pcm_handle);
+ exit(code);
+ return code;
+}
+
+static void signal_handler(int sig)
+{
+ if (in_aborting)
+ return;
+
+ in_aborting = 1;
+
+ if (pcm_handle)
+ snd_pcm_abort(pcm_handle);
+ if (sig == SIGABRT) {
+ pcm_handle = NULL;
+ prg_exit(EXIT_FAILURE);
+ }
+ signal(sig, signal_handler);
+}
+
+static void help(void)
+{
+ const int *fmt;
+
+ printf(
+ _("Usage: speaker-test [OPTION]... \n"
+ "-h,--help help\n"
+ "-D,--device playback device\n"
+ "-r,--rate stream rate in Hz\n"
+ "-c,--channels count of channels in stream\n"
+ "-f,--frequency sine wave frequency in Hz\n"
+ "-F,--format sample format\n"
+ "-b,--buffer ring buffer size in us\n"
+ "-p,--period period size in us\n"
+ "-P,--nperiods number of periods\n"
+ "-t,--test pink=use pink noise, sine=use sine wave, wav=WAV file\n"
+ "-l,--nloops specify number of loops to test, 0 = infinite\n"
+ "-s,--speaker single speaker test. Values 1=Left, 2=right, etc\n"
+ "-w,--wavfile Use the given WAV file as a test sound\n"
+ "-W,--wavdir Specify the directory containing WAV files\n"
+ "-m,--chmap Specify the channel map to override\n"
+ "\n"));
+ printf(_("Recognized sample formats are:"));
+ for (fmt = supported_formats; *fmt >= 0; fmt++) {
+ const char *s = snd_pcm_format_name(*fmt);
+ if (s)
+ printf(" %s", s);
+ }
+
+ printf("\n\n");
+}
+
+int main(int argc, char *argv[]) {
+ snd_pcm_t *handle;
+ int err, morehelp;
+ snd_pcm_hw_params_t *hwparams;
+ snd_pcm_sw_params_t *swparams;
+ uint8_t *frames;
+ int chn;
+ const int *fmt;
+ double time1,time2,time3;
+ unsigned int n, nloops;
+ struct timeval tv1,tv2;
+#ifdef CONFIG_SUPPORT_CHMAP
+ const char *chmap = NULL;
+#endif
+
+ static const struct option long_option[] = {
+ {"help", 0, NULL, 'h'},
+ {"device", 1, NULL, 'D'},
+ {"rate", 1, NULL, 'r'},
+ {"channels", 1, NULL, 'c'},
+ {"frequency", 1, NULL, 'f'},
+ {"format", 1, NULL, 'F'},
+ {"buffer", 1, NULL, 'b'},
+ {"period", 1, NULL, 'p'},
+ {"nperiods", 1, NULL, 'P'},
+ {"test", 1, NULL, 't'},
+ {"nloops", 1, NULL, 'l'},
+ {"speaker", 1, NULL, 's'},
+ {"wavfile", 1, NULL, 'w'},
+ {"wavdir", 1, NULL, 'W'},
+ {"debug", 0, NULL, 'd'},
+#ifdef CONFIG_SUPPORT_CHMAP
+ {"chmap", 1, NULL, 'm'},
+#endif
+ {NULL, 0, NULL, 0 },
+ };
+
+#ifdef ENABLE_NLS
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+#endif
+
+ snd_pcm_hw_params_alloca(&hwparams);
+ snd_pcm_sw_params_alloca(&swparams);
+
+ nloops = 0;
+ morehelp = 0;
+
+ printf("\nspeaker-test %s\n\n", SND_UTIL_VERSION_STR);
+ while (1) {
+ int c;
+
+ if ((c = getopt_long(argc, argv, "hD:r:c:f:F:b:p:P:t:l:s:w:W:d"
+#ifdef CONFIG_SUPPORT_CHMAP
+ "m:"
+#endif
+ , long_option, NULL)) < 0)
+ break;
+
+ switch (c) {
+ case 'h':
+ morehelp++;
+ break;
+ case 'D':
+ device = strdup(optarg);
+ break;
+ case 'F':
+ format = snd_pcm_format_value(optarg);
+ for (fmt = supported_formats; *fmt >= 0; fmt++)
+ if (*fmt == format)
+ break;
+ if (*fmt < 0) {
+ fprintf(stderr, "Format %s is not supported...\n", snd_pcm_format_name(format));
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case 'r':
+ rate = atoi(optarg);
+ rate = rate < 4000 ? 4000 : rate;
+ rate = rate > 384000 ? 384000 : rate;
+ break;
+ case 'c':
+ channels = atoi(optarg);
+ channels = channels < 1 ? 1 : channels;
+ channels = channels > 1024 ? 1024 : channels;
+ break;
+ case 'f':
+ freq = atof(optarg);
+ freq = freq < 30.0 ? 30.0 : freq;
+ freq = freq > 5000.0 ? 5000.0 : freq;
+ break;
+ case 'b':
+ buffer_time = atoi(optarg);
+ buffer_time = buffer_time > 1000000 ? 1000000 : buffer_time;
+ break;
+ case 'p':
+ period_time = atoi(optarg);
+ period_time = period_time > 1000000 ? 1000000 : period_time;
+ break;
+ case 'P':
+ nperiods = atoi(optarg);
+ if (nperiods < 2 || nperiods > 1024) {
+ fprintf(stderr, _("Invalid number of periods %d\n"), nperiods);
+ exit(1);
+ }
+ break;
+ case 't':
+ if (*optarg == 'p')
+ test_type = TEST_PINK_NOISE;
+ else if (*optarg == 's')
+ test_type = TEST_SINE;
+ else if (*optarg == 'w')
+ test_type = TEST_WAV;
+ else if (*optarg == 't')
+ test_type = TEST_PATTERN;
+ else if (isdigit(*optarg)) {
+ test_type = atoi(optarg);
+ if (test_type < TEST_PINK_NOISE || test_type > TEST_PATTERN) {
+ fprintf(stderr, _("Invalid test type %s\n"), optarg);
+ exit(1);
+ }
+ } else {
+ fprintf(stderr, _("Invalid test type %s\n"), optarg);
+ exit(1);
+ }
+ break;
+ case 'l':
+ nloops = atoi(optarg);
+ break;
+ case 's':
+ speaker = atoi(optarg);
+ speaker = speaker < 1 ? 0 : speaker;
+ speaker = speaker > channels ? 0 : speaker;
+ if (speaker==0) {
+ fprintf(stderr, _("Invalid parameter for -s option.\n"));
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case 'w':
+ given_test_wav_file = optarg;
+ break;
+ case 'W':
+ wav_file_dir = optarg;
+ break;
+ case 'd':
+ debug = 1;
+ break;
+#ifdef CONFIG_SUPPORT_CHMAP
+ case 'm':
+ chmap = optarg;
+ break;
+#endif
+ default:
+ fprintf(stderr, _("Unknown option '%c'\n"), c);
+ exit(EXIT_FAILURE);
+ break;
+ }
+ }
+
+ if (morehelp) {
+ help();
+ exit(EXIT_SUCCESS);
+ }
+
+ if (test_type == TEST_WAV)
+ format = SND_PCM_FORMAT_S16_LE; /* fixed format */
+
+ printf(_("Playback device is %s\n"), device);
+ printf(_("Stream parameters are %iHz, %s, %i channels\n"), rate, snd_pcm_format_name(format), channels);
+ switch (test_type) {
+ case TEST_PINK_NOISE:
+ printf(_("Using 16 octaves of pink noise\n"));
+ break;
+ case TEST_SINE:
+ printf(_("Sine wave rate is %.4fHz\n"), freq);
+ break;
+ case TEST_WAV:
+ printf(_("WAV file(s)\n"));
+ break;
+
+ }
+
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+ signal(SIGABRT, signal_handler);
+
+ if ((err = snd_pcm_open(&handle, device, SND_PCM_STREAM_PLAYBACK, 0)) < 0) {
+ printf(_("Playback open error: %d,%s\n"), err,snd_strerror(err));
+ prg_exit(EXIT_FAILURE);
+ }
+ pcm_handle = handle;
+
+ if ((err = set_hwparams(handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
+ printf(_("Setting of hwparams failed: %s\n"), snd_strerror(err));
+ prg_exit(EXIT_FAILURE);
+ }
+ if ((err = set_swparams(handle, swparams)) < 0) {
+ printf(_("Setting of swparams failed: %s\n"), snd_strerror(err));
+ prg_exit(EXIT_FAILURE);
+ }
+
+#ifdef CONFIG_SUPPORT_CHMAP
+ err = config_chmap(handle, chmap);
+ if (err < 0)
+ prg_exit(EXIT_FAILURE);
+#endif
+
+ if (debug) {
+ snd_output_t *log;
+ err = snd_output_stdio_attach(&log, stderr, 0);
+ if (err >= 0) {
+ snd_pcm_dump(handle, log);
+ snd_output_close(log);
+ }
+ }
+
+ frames = malloc(snd_pcm_frames_to_bytes(handle, period_size));
+ if (test_type == TEST_PINK_NOISE)
+ initialize_pink_noise(&pink, 16);
+
+ if (frames == NULL) {
+ fprintf(stderr, _("No enough memory\n"));
+ prg_exit(EXIT_FAILURE);
+ }
+
+ if (speaker==0) {
+
+ if (test_type == TEST_WAV) {
+ for (chn = 0; chn < channels; chn++) {
+ if (setup_wav_file(get_speaker_channel(chn)) < 0)
+ prg_exit(EXIT_FAILURE);
+ }
+ }
+
+ for (n = 0; (! nloops || n < nloops) && !in_aborting; n++) {
+
+ gettimeofday(&tv1, NULL);
+ for(chn = 0; chn < channels; chn++) {
+ int channel = get_speaker_channel(chn);
+ printf(" %d - %s\n", channel, get_channel_name(channel));
+
+ err = write_loop(handle, channel, ((rate*3)/period_size), frames);
+
+ if (err < 0) {
+ fprintf(stderr, _("Transfer failed: %s\n"), snd_strerror(err));
+ prg_exit(EXIT_SUCCESS);
+ }
+ }
+ gettimeofday(&tv2, NULL);
+ time1 = (double)tv1.tv_sec + ((double)tv1.tv_usec / 1000000.0);
+ time2 = (double)tv2.tv_sec + ((double)tv2.tv_usec / 1000000.0);
+ time3 = time2 - time1;
+ printf(_("Time per period = %lf\n"), time3 );
+ }
+ } else {
+ chn = get_speaker_channel(speaker - 1);
+
+ if (test_type == TEST_WAV) {
+ if (setup_wav_file(chn) < 0)
+ prg_exit(EXIT_FAILURE);
+ }
+
+ printf(" - %s\n", get_channel_name(chn));
+ err = write_loop(handle, chn, ((rate*5)/period_size), frames);
+
+ if (err < 0) {
+ fprintf(stderr, _("Transfer failed: %s\n"), snd_strerror(err));
+ }
+ }
+
+
+ free(frames);
+
+ return prg_exit(EXIT_SUCCESS);
+}
diff --git a/utils/Makefile.am b/utils/Makefile.am
new file mode 100644
index 0000000..083e5b4
--- /dev/null
+++ b/utils/Makefile.am
@@ -0,0 +1,4 @@
+EXTRA_DIST = buildrpm
+
+rpm: buildrpm alsa-lib.spec
+ VERSION=$(VERSION) $(srcdir)/buildrpm
diff --git a/utils/Makefile.in b/utils/Makefile.in
new file mode 100644
index 0000000..be83897
--- /dev/null
+++ b/utils/Makefile.in
@@ -0,0 +1,409 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = utils
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(srcdir)/alsa-utils.spec.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/aconfig.h
+CONFIG_CLEAN_FILES = alsa-utils.spec
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
+ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+AMTAR = @AMTAR@
+ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSESINC = @CURSESINC@
+CURSESLIB = @CURSESLIB@
+CURSES_CFLAGS = @CURSES_CFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBRT = @LIBRT@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
+NCURSESW_LIBS = @NCURSESW_LIBS@
+NCURSES_CFLAGS = @NCURSES_CFLAGS@
+NCURSES_LIBS = @NCURSES_LIBS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
+SND_UTIL_MINOR = @SND_UTIL_MINOR@
+SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
+SND_UTIL_VERSION = @SND_UTIL_VERSION@
+STRIP = @STRIP@
+TESTSOUND = @TESTSOUND@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+ncurses5_config = @ncurses5_config@
+ncursesw5_config = @ncursesw5_config@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevrulesdir = @udevrulesdir@
+xmlto = @xmlto@
+EXTRA_DIST = buildrpm
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign utils/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+alsa-utils.spec: $(top_builddir)/config.status $(srcdir)/alsa-utils.spec.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
+
+
+rpm: buildrpm alsa-lib.spec
+ VERSION=$(VERSION) $(srcdir)/buildrpm
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/utils/alsa-utils.spec.in b/utils/alsa-utils.spec.in
new file mode 100644
index 0000000..8daf3ba
--- /dev/null
+++ b/utils/alsa-utils.spec.in
@@ -0,0 +1,76 @@
+%define ver @VERSION@
+%define rel 1
+
+Summary: Advanced Linux Sound Architecture (ALSA) - Utils
+Name: alsa-utils
+Version: %ver
+Release: %rel
+Copyright: GPL
+Group: System/Libraries
+Source: ftp://ftp.alsa-project.org/pub/utils/alsa-utils-%{ver}.tar.bz2
+BuildRoot: %{_tmppath}/%{name}-%{version}-root
+URL: http://www.alsa-project.org
+Requires: alsa-lib ncurses
+BuildRequires: alsa-lib-devel ncurses-devel gettext
+
+%description
+
+Advanced Linux Sound Architecture (ALSA) - Utils
+
+%changelog
+* Sun Oct 1 2006 Jaroslav Kysela <perex@perex.cz>
+- add gettext to BuildRequires
+- add more files (see alsa bug#2139)
+
+* Tue Nov 25 2003 Ronny V. Vindenes <sublett@amigascne.org>
+- include all manpages
+
+* Thu Mar 6 2003 Ronny V. Vindenes <sublett@dc-s.com>
+
+- removed wrongly included doc file
+- changed BuildRoot from /var/tmp to _tmppath
+- use standard rpm macros for build & install section
+- updated dependencies
+
+* Tue Nov 20 2001 Jaroslav Kysela <perex@perex.cz>
+
+- changed BuildRoot from /tmp to /var/tmp
+- _prefix and _mandir macros are used for configure and mkdir
+- DESTDIR is used for make install
+
+* Sun Nov 11 2001 Miroslav Benes <mbenes@tenez.cz>
+
+- dangerous command "rpm -rf $RPM_BUILD_ROOT" checks $RPM_BUILD_ROOT variable
+- unset key "Docdir" - on some new systems are documentation in /usr/share/doc
+
+* Mon May 28 1998 Helge Jensen <slog@slog.dk>
+
+- Made SPEC file
+
+%prep
+%setup
+%build
+%configure
+make
+
+%install
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+%makeinstall
+
+%clean
+[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-, root, root)
+
+%doc ChangeLog COPYING README
+
+%{_prefix}/sbin/*
+%{_prefix}/bin/*
+%{_mandir}/man?/*
+%{_mandir}/fr/man?/*
+%{_prefix}/share/alsa/speaker-test/*
+%{_prefix}/share/locale/ja/LC_MESSAGES/*
+%{_prefix}/share/locale/ru/LC_MESSAGES/*
+%{_prefix}/share/man/fr/man8/alsaconf.8.gz
+%{_prefix}/share/sounds/alsa/*
diff --git a/utils/buildrpm b/utils/buildrpm
new file mode 100644
index 0000000..3a9ab86
--- /dev/null
+++ b/utils/buildrpm
@@ -0,0 +1,44 @@
+#!/bin/bash
+
+source=.
+version=`cat $source/../version`
+package=$source/../alsa-utils-$version.tar.bz2
+packagedir=/usr/src/redhat
+xrpmbuild=rpm
+rpmbuild --usage 2> /dev/null > /dev/null && xrpmbuild=rpmbuild
+
+# SuSE path
+if [ -d /usr/src/packages ]; then
+ packagedir=/usr/src/packages
+fi
+
+make -C .. clean
+make -C .. dist
+
+if [ ! -r $package ]; then
+ echo "Error: wrong package: $package"
+ exit 1
+fi
+
+cp -fv $package ${packagedir}/SOURCES
+
+if [ ! -r $source/buildrpm ]; then
+ echo "Error: invalid directory: $source"
+ exit 1
+fi
+
+if [ ! -d ${packagedir} ]; then
+ echo "Error: ${packagedir} directory not found"
+ exit 1
+fi
+
+if [ ! -r $source/alsadriver.spec ]; then
+ cd $source/..
+ ./configure
+ cd utils
+fi
+
+cp -fv $source/alsa-utils.spec ${packagedir}/SPECS
+cd ${packagedir}/SPECS
+$xrpmbuild -ba alsa-utils.spec
+cd ${packagedir}
