Project import generated by Copybara.

GitOrigin-RevId: 77bcd1a7b643dd9ab7c4a29a0e77e96b09566213
diff --git a/ABOUT-NLS b/ABOUT-NLS
deleted file mode 100644
index b1de1b6..0000000
--- a/ABOUT-NLS
+++ /dev/null
@@ -1,1282 +0,0 @@
-1 Notes on the Free Translation Project
-***************************************
-
-Free software is going international!  The Free Translation Project is
-a way to get maintainers of free software, translators, and users all
-together, so that free software will gradually become able to speak many
-languages.  A few packages already provide translations for their
-messages.
-
-   If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site.  But you do _not_
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
-   Installers will find here some useful hints.  These notes also
-explain how users should proceed for getting the programs to use the
-available translations.  They tell how people wanting to contribute and
-work on translations can contact the appropriate team.
-
-1.1 INSTALL Matters
-===================
-
-Some packages are "localizable" when properly installed; the programs
-they contain can be made to speak your own native language.  Most such
-packages use GNU `gettext'.  Other packages have their own ways to
-internationalization, predating GNU `gettext'.
-
-   By default, this package will be installed to allow translation of
-messages.  It will automatically detect whether the system already
-provides the GNU `gettext' functions.  Installers may use special
-options at configuration time for changing the default behaviour.  The
-command:
-
-     ./configure --disable-nls
-
-will _totally_ disable translation of messages.
-
-   When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl' library
-and will decide to use it.  If not, you may have to to use the
-`--with-libintl-prefix' option to tell `configure' where to look for it.
-
-   Internationalized packages usually have many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language.  Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package.  However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-1.2 Using This Package
-======================
-
-As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-`LL_CC' combination.  If you happen to have the `LC_ALL' or some other
-`LC_xxx' environment variables set, you should unset them before
-setting `LANG', otherwise the setting of `LANG' will not have the
-desired effect.  Here `LL' is an ISO 639 two-letter language code, and
-`CC' is an ISO 3166 two-letter country code.  For example, let's
-suppose that you speak German and live in Germany.  At the shell
-prompt, merely execute `setenv LANG de_DE' (in `csh'),
-`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-This can be done from your `.login' or `.profile' file, once and for
-all.
-
-   You might think that the country code specification is redundant.
-But in fact, some languages have dialects in different countries.  For
-example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
-country code serves to distinguish the dialects.
-
-   The locale naming convention of `LL_CC', with `LL' denoting the
-language and `CC' denoting the country, is the one use on systems based
-on GNU libc.  On other systems, some variations of this scheme are
-used, such as `LL' or `LL_CC.ENCODING'.  You can get the list of
-locales supported by your system for your language by running the
-command `locale -a | grep '^LL''.
-
-   Not all programs have translations for all languages.  By default, an
-English message is shown in place of a nonexistent translation.  If you
-understand other languages, you can set up a priority list of languages.
-This is done through a different environment variable, called
-`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-for the purpose of message handling, but you still need to have `LANG'
-set to the primary language; this is required by other parts of the
-system libraries.  For example, some Swedish users who would rather
-read translations in German than English for when Swedish is not
-available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-
-   Special advice for Norwegian users: The language code for Norwegian
-bokma*l changed from `no' to `nb' recently (in 2003).  During the
-transition period, while some message catalogs for this language are
-installed under `nb' and some older ones under `no', it's recommended
-for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-older translations are used.
-
-   In the `LANGUAGE' environment variable, but not in the `LANG'
-environment variable, `LL_CC' combinations can be abbreviated as `LL'
-to denote the language's main dialect.  For example, `de' is equivalent
-to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-(Portuguese as spoken in Portugal) in this context.
-
-1.3 Translating Teams
-=====================
-
-For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list.  The up-to-date list of
-teams can be found at the Free Translation Project's homepage,
-`http://translationproject.org/', in the "Teams" area.
-
-   If you'd like to volunteer to _work_ at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is _not_ the same as the list itself, it has
-`-request' appended.  For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
-     subscribe
-
-   Keep in mind that team members are expected to participate
-_actively_ in translations, or at solving translational difficulties,
-rather than merely lurking around.  If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `coordinator@translationproject.org' to
-reach the coordinator for all translator teams.
-
-   The English team is special.  It works at improving and uniformizing
-the terminology in use.  Proven linguistic skills are praised more than
-programming skills, here.
-
-1.4 Available Packages
-======================
-
-Languages are not equally supported in all packages.  The following
-matrix shows the current state of internationalization, as of June
-2010.  The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination, with a
-translation percentage of at least 50%.
-
-     Ready PO files       af am an ar as ast az be be@latin bg bn_IN bs ca
-                        +--------------------------------------------------+
-     a2ps               |                       []                      [] |
-     aegis              |                                                  |
-     ant-phone          |                                                  |
-     anubis             |                                                  |
-     aspell             |                []                             [] |
-     bash               |                                                  |
-     bfd                |                                                  |
-     bibshelf           |                []                                |
-     binutils           |                                                  |
-     bison              |                                                  |
-     bison-runtime      |                []                                |
-     bluez-pin          | []             []                                |
-     bombono-dvd        |                                                  |
-     buzztard           |                                                  |
-     cflow              |                                                  |
-     clisp              |                                                  |
-     coreutils          |                                   []          [] |
-     cpio               |                                                  |
-     cppi               |                                                  |
-     cpplib             |                                               [] |
-     cryptsetup         |                                                  |
-     dfarc              |                                                  |
-     dialog             |                             []                [] |
-     dico               |                                                  |
-     diffutils          |                                               [] |
-     dink               |                                                  |
-     doodle             |                                                  |
-     e2fsprogs          |                                               [] |
-     enscript           |                                               [] |
-     exif               |                                                  |
-     fetchmail          |                                               [] |
-     findutils          |                                   []             |
-     flex               |                                               [] |
-     freedink           |                                                  |
-     gas                |                                                  |
-     gawk               |                []                             [] |
-     gcal               |                                               [] |
-     gcc                |                                                  |
-     gettext-examples   | []             []                 []          [] |
-     gettext-runtime    |                                   []          [] |
-     gettext-tools      |                                   []          [] |
-     gip                |                                   []             |
-     gjay               |                                                  |
-     gliv               |                                   []             |
-     glunarclock        |                []                 []             |
-     gnubiff            |                                                  |
-     gnucash            |                                               [] |
-     gnuedu             |                                                  |
-     gnulib             |                                                  |
-     gnunet             |                                                  |
-     gnunet-gtk         |                                                  |
-     gnutls             |                                                  |
-     gold               |                                                  |
-     gpe-aerial         |                                                  |
-     gpe-beam           |                                                  |
-     gpe-bluetooth      |                                                  |
-     gpe-calendar       |                                                  |
-     gpe-clock          |                []                                |
-     gpe-conf           |                                                  |
-     gpe-contacts       |                                                  |
-     gpe-edit           |                                                  |
-     gpe-filemanager    |                                                  |
-     gpe-go             |                                                  |
-     gpe-login          |                                                  |
-     gpe-ownerinfo      |                []                                |
-     gpe-package        |                                                  |
-     gpe-sketchbook     |                                                  |
-     gpe-su             |                []                                |
-     gpe-taskmanager    |                []                                |
-     gpe-timesheet      |                []                                |
-     gpe-today          |                []                                |
-     gpe-todo           |                                                  |
-     gphoto2            |                                                  |
-     gprof              |                                   []             |
-     gpsdrive           |                                                  |
-     gramadoir          |                                                  |
-     grep               |                                                  |
-     grub               |                []                             [] |
-     gsasl              |                                                  |
-     gss                |                                                  |
-     gst-plugins-bad    |                                   []             |
-     gst-plugins-base   |                                   []             |
-     gst-plugins-good   |                                   []             |
-     gst-plugins-ugly   |                                   []             |
-     gstreamer          | []                                []          [] |
-     gtick              |                                                  |
-     gtkam              |                       []                         |
-     gtkorphan          |                                   []             |
-     gtkspell           | []             []     []                         |
-     gutenprint         |                                                  |
-     hello              |                                   []             |
-     help2man           |                                                  |
-     hylafax            |                                                  |
-     idutils            |                                                  |
-     indent             |                                   []          [] |
-     iso_15924          |                                                  |
-     iso_3166           | []          []        []          []  []   [] [] |
-     iso_3166_2         |                                                  |
-     iso_4217           |                                                  |
-     iso_639            |             [] []     []              []         |
-     iso_639_3          |                                                  |
-     jwhois             |                                                  |
-     kbd                |                                                  |
-     keytouch           |                                               [] |
-     keytouch-editor    |                                                  |
-     keytouch-keyboa... |                                               [] |
-     klavaro            |          []                                      |
-     latrine            |                                                  |
-     ld                 |                                   []             |
-     leafpad            |                                   []          [] |
-     libc               |                                   []          [] |
-     libexif            |                       ()                         |
-     libextractor       |                                                  |
-     libgnutls          |                                                  |
-     libgpewidget       |                                                  |
-     libgpg-error       |                                                  |
-     libgphoto2         |                                                  |
-     libgphoto2_port    |                                                  |
-     libgsasl           |                                                  |
-     libiconv           |                                   []             |
-     libidn             |                                                  |
-     lifelines          |                                                  |
-     liferea            |                             []                [] |
-     lilypond           |                                                  |
-     linkdr             |          []                                      |
-     lordsawar          |                                                  |
-     lprng              |                                                  |
-     lynx               |                                               [] |
-     m4                 |                                                  |
-     mailfromd          |                                                  |
-     mailutils          |                                                  |
-     make               |                                                  |
-     man-db             |                                                  |
-     man-db-manpages    |                                                  |
-     minicom            |                                                  |
-     mkisofs            |                                                  |
-     myserver           |                                                  |
-     nano               |                                   []          [] |
-     opcodes            |                                                  |
-     parted             |                                                  |
-     pies               |                                                  |
-     popt               |                                                  |
-     psmisc             |                                                  |
-     pspp               |                                               [] |
-     pwdutils           |                                                  |
-     radius             |                                               [] |
-     recode             |                       []                      [] |
-     rosegarden         |                                                  |
-     rpm                |                                                  |
-     rush               |                                                  |
-     sarg               |                                                  |
-     screem             |                                                  |
-     scrollkeeper       |                    [] []                      [] |
-     sed                |                []                             [] |
-     sharutils          |                                   []          [] |
-     shishi             |                                                  |
-     skencil            |                                                  |
-     solfege            |                                                  |
-     solfege-manual     |                                                  |
-     soundtracker       |                                                  |
-     sp                 |                                                  |
-     sysstat            |                                                  |
-     tar                |                                   []             |
-     texinfo            |                                                  |
-     tin                |                                                  |
-     unicode-han-tra... |                                                  |
-     unicode-transla... |                                                  |
-     util-linux-ng      |                                               [] |
-     vice               |                                                  |
-     vmm                |                                                  |
-     vorbis-tools       |                                                  |
-     wastesedge         |                                                  |
-     wdiff              |                                                  |
-     wget               |                       []                      [] |
-     wyslij-po          |                                                  |
-     xchat              |                []     []          []          [] |
-     xdg-user-dirs      | []    []    [] []     []    []    []  []      [] |
-     xkeyboard-config   |                                   []          [] |
-                        +--------------------------------------------------+
-                          af am an ar as ast az be be@latin bg bn_IN bs ca
-                           6  0  1  2  3 19   1 10     3    28   3    1 38
-
-                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
-                        +-------------------------------------------------+
-     a2ps               |     [] []  []  []     []            [] []       |
-     aegis              |        []  []                       []          |
-     ant-phone          |        []  ()                                   |
-     anubis             |        []  []                                   |
-     aspell             |     [] []  []         []            []          |
-     bash               |     []                           [] []          |
-     bfd                |                                     []          |
-     bibshelf           |        []  []                       []          |
-     binutils           |                                     []          |
-     bison              |            []  []                               |
-     bison-runtime      |        []  []  []                      []       |
-     bluez-pin          |     [] []  []  []                [] []          |
-     bombono-dvd        |        []                                       |
-     buzztard           |     [] []  []                                   |
-     cflow              |        []  []                                   |
-     clisp              |        []  []     []                []          |
-     coreutils          |     [] []  []                          []       |
-     cpio               |                                                 |
-     cppi               |                                                 |
-     cpplib             |        []  []                       []          |
-     cryptsetup         |            []                                   |
-     dfarc              |        []  []                       []          |
-     dialog             |        []  []                    [] []    []    |
-     dico               |                                                 |
-     diffutils          |     [] []  []  []                [] []          |
-     dink               |        []  []                       []          |
-     doodle             |            []                                   |
-     e2fsprogs          |     []     []                       []          |
-     enscript           |        []  []         []                        |
-     exif               |     () []  []                                   |
-     fetchmail          |     [] []  ()  []     []            []          |
-     findutils          |     [] []  []                                   |
-     flex               |            []                       []          |
-     freedink           |        []  []                       []          |
-     gas                |                                     []          |
-     gawk               |        []  []                       []          |
-     gcal               |                                     []          |
-     gcc                |            []                       []          |
-     gettext-examples   |            []  []                [] []          |
-     gettext-runtime    |        []  []                    [] []          |
-     gettext-tools      |            []                       []    []    |
-     gip                |        []  []                       []    []    |
-     gjay               |            []                                   |
-     gliv               |     [] []  []                                   |
-     glunarclock        |        []  []                                   |
-     gnubiff            |            ()                                   |
-     gnucash            |     []     ()  ()     ()            ()          |
-     gnuedu             |        []                           []          |
-     gnulib             |            []                       []          |
-     gnunet             |                                                 |
-     gnunet-gtk         |        []                                       |
-     gnutls             |     []     []                                   |
-     gold               |                                     []          |
-     gpe-aerial         |     [] []  []                       []          |
-     gpe-beam           |     [] []  []                       []          |
-     gpe-bluetooth      |        []  []                                   |
-     gpe-calendar       |        []                                       |
-     gpe-clock          |     [] []  []                       []          |
-     gpe-conf           |     [] []  []                                   |
-     gpe-contacts       |        []  []                       []          |
-     gpe-edit           |        []  []                                   |
-     gpe-filemanager    |        []  []                       []          |
-     gpe-go             |     [] []  []                       []          |
-     gpe-login          |        []  []                                   |
-     gpe-ownerinfo      |     [] []  []                       []          |
-     gpe-package        |        []  []                       []          |
-     gpe-sketchbook     |     [] []  []                       []          |
-     gpe-su             |     [] []  []                       []          |
-     gpe-taskmanager    |     [] []  []                       []          |
-     gpe-timesheet      |     [] []  []                       []          |
-     gpe-today          |     [] []  []                       []          |
-     gpe-todo           |        []  []                       []          |
-     gphoto2            |     [] []  ()         []            []    []    |
-     gprof              |        []  []                       []          |
-     gpsdrive           |        []                           [] []       |
-     gramadoir          |        []  []                    []             |
-     grep               |     []                                          |
-     grub               |        []  []                                   |
-     gsasl              |            []                                   |
-     gss                |                                                 |
-     gst-plugins-bad    |     [] []  []                       []    []    |
-     gst-plugins-base   |     [] []  []                       []    []    |
-     gst-plugins-good   |     [] []  []  []                   []    []    |
-     gst-plugins-ugly   |     [] []  []  []                   []    []    |
-     gstreamer          |     [] []  []                       []    []    |
-     gtick              |        []  ()                    []             |
-     gtkam              |     [] []  ()                    [] []          |
-     gtkorphan          |     [] []  []                    []             |
-     gtkspell           |     [] []  []  []                [] []    []    |
-     gutenprint         |        []  []         []                        |
-     hello              |        []  []                    [] []          |
-     help2man           |            []                                   |
-     hylafax            |            []                       []          |
-     idutils            |        []  []                                   |
-     indent             |     [] []  []                    [] [] [] []    |
-     iso_15924          |        []      ()                [] []          |
-     iso_3166           | []  [] []  []  ()                [] [] [] ()    |
-     iso_3166_2         |                ()                               |
-     iso_4217           |     [] []  []  ()                   [] []       |
-     iso_639            | []  [] []  []  ()                [] []          |
-     iso_639_3          | []                                              |
-     jwhois             |                                     []          |
-     kbd                |     [] []  []  []                   []          |
-     keytouch           |        []  []                                   |
-     keytouch-editor    |        []  []                                   |
-     keytouch-keyboa... |        []                                       |
-     klavaro            |     [] []  []                    []             |
-     latrine            |        []  ()                                   |
-     ld                 |        []                           []          |
-     leafpad            |     [] []  []  []                   []    []    |
-     libc               |     [] []  []                       []          |
-     libexif            |        []  []         ()                        |
-     libextractor       |                                                 |
-     libgnutls          |     []                                          |
-     libgpewidget       |        []  []                                   |
-     libgpg-error       |     []     []                                   |
-     libgphoto2         |        []  ()                                   |
-     libgphoto2_port    |        []  ()                             []    |
-     libgsasl           |                                                 |
-     libiconv           |     [] []  []                    []    []       |
-     libidn             |     []     []                    []             |
-     lifelines          |        []  ()                                   |
-     liferea            |     []     []  []                   []    []    |
-     lilypond           |     []     []                       []          |
-     linkdr             |        []  []                       []          |
-     lordsawar          |        []                                       |
-     lprng              |                                                 |
-     lynx               |     [] []  []                          []       |
-     m4                 |     [] []  []  []                               |
-     mailfromd          |                                                 |
-     mailutils          |                                     []          |
-     make               |        []  []                       []          |
-     man-db             |                                                 |
-     man-db-manpages    |                                                 |
-     minicom            |     [] []  []                       []          |
-     mkisofs            |                                                 |
-     myserver           |                                                 |
-     nano               |            []                       []    []    |
-     opcodes            |            []                       []          |
-     parted             |     []     []                                   |
-     pies               |                                                 |
-     popt               |     [] []  []                    [] []          |
-     psmisc             |     []     []                             []    |
-     pspp               |                                     []          |
-     pwdutils           |        []                                       |
-     radius             |                                     []          |
-     recode             |     [] []  []  []                [] []          |
-     rosegarden         |     ()     ()                       ()          |
-     rpm                |        []  []                       []          |
-     rush               |                                                 |
-     sarg               |                                                 |
-     screem             |                                                 |
-     scrollkeeper       |     [] []  []         []            []          |
-     sed                |     []     []  []                [] [] []       |
-     sharutils          |        []  []                       [] []       |
-     shishi             |                                                 |
-     skencil            |        []  ()                       []          |
-     solfege            |            []                    []    []       |
-     solfege-manual     |                                  []    []       |
-     soundtracker       |        []  []                       []          |
-     sp                 |            []                                   |
-     sysstat            |        []  []                             []    |
-     tar                |     []     []                          [] []    |
-     texinfo            |            []                    [] []          |
-     tin                |            []                          []       |
-     unicode-han-tra... |                                                 |
-     unicode-transla... |                                                 |
-     util-linux-ng      |     [] []  []                       []          |
-     vice               |        ()  ()                                   |
-     vmm                |            []                                   |
-     vorbis-tools       |     []                           []             |
-     wastesedge         |        []                                       |
-     wdiff              |            []                       []          |
-     wget               |     []     []                          []       |
-     wyslij-po          |                                                 |
-     xchat              |     []     []  []                   [] []       |
-     xdg-user-dirs      | []  [] []  []  []                [] [] [] []    |
-     xkeyboard-config   | []  [] []  []                    [] []          |
-                        +-------------------------------------------------+
-                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
-                           5  64 105 117 18  1   8     0   28 89 18 19  0
-
-                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
-                        +----------------------------------------------------+
-     a2ps               | []  []                          []        []       |
-     aegis              |     []                                 []          |
-     ant-phone          |     []                                 []          |
-     anubis             | []  []                          []     []          |
-     aspell             |     []  []                      []     []          |
-     bash               | []  []                          []        []       |
-     bfd                | []  []                          []                 |
-     bibshelf           | []  []  []                      []     []          |
-     binutils           | []  []                          []                 |
-     bison              | []  []  []                      []                 |
-     bison-runtime      | []  []  []                      []     [] []       |
-     bluez-pin          | []  []  []                [] [] []  []    []       |
-     bombono-dvd        | []                                                 |
-     buzztard           |                                 []                 |
-     cflow              | []      []                      []                 |
-     clisp              |     []                                             |
-     coreutils          |     []  []                []    []     []          |
-     cpio               | []  []  []                      []                 |
-     cppi               | []  []                                             |
-     cpplib             | []  []                          []                 |
-     cryptsetup         |     []                          []     []          |
-     dfarc              | []  []                                 []          |
-     dialog             |     []  [] []                   []  [] [] []       |
-     dico               |                                                    |
-     diffutils          | []  []  [] []    []       []    []     [] []       |
-     dink               |     []                                             |
-     doodle             |         []                             []          |
-     e2fsprogs          |     []                          []                 |
-     enscript           |     []  []             []       []                 |
-     exif               | []  []                          []  [] [] []       |
-     fetchmail          |     []                          []     [] []       |
-     findutils          | []  []  []                []    []     []          |
-     flex               | []  []  []                                         |
-     freedink           | []  []                          []                 |
-     gas                |     []                          []                 |
-     gawk               |     []  []       []             []     () []       |
-     gcal               |     []                                             |
-     gcc                |                                 []                 |
-     gettext-examples   | []  []  []                []    []     [] []       |
-     gettext-runtime    | []  []  []                      []     [] []       |
-     gettext-tools      |     []                          []     [] []       |
-     gip                | []  []  [] []                   []        []       |
-     gjay               | []                                                 |
-     gliv               | []  ()                                             |
-     glunarclock        | []      []                []    []                 |
-     gnubiff            |     ()                          []     ()          |
-     gnucash            | ()  ()           ()       ()           () []       |
-     gnuedu             |     []                                 []          |
-     gnulib             | []  []  []                []           [] []       |
-     gnunet             |                                                    |
-     gnunet-gtk         |     []                                             |
-     gnutls             |     []                                 []          |
-     gold               | []                              []                 |
-     gpe-aerial         | []  []                          []                 |
-     gpe-beam           | []  []                          []        []       |
-     gpe-bluetooth      | []                              []     [] []       |
-     gpe-calendar       | []                                        []       |
-     gpe-clock          | []  []                    []    []        []       |
-     gpe-conf           | []  []                          []        []       |
-     gpe-contacts       | []  []                          []        []       |
-     gpe-edit           | []                              []        []       |
-     gpe-filemanager    | []                        []    []        []       |
-     gpe-go             | []  []                    []    []        []       |
-     gpe-login          | []                              []        []       |
-     gpe-ownerinfo      | []  []                    []    []        []       |
-     gpe-package        | []                              []        []       |
-     gpe-sketchbook     | []  []                          []        []       |
-     gpe-su             | []  []     []             []    []        []       |
-     gpe-taskmanager    | []  []                    []    []        []       |
-     gpe-timesheet      | []  []  []                      []        []       |
-     gpe-today          | []  []  [] []             []    []        []       |
-     gpe-todo           | []                              []        []       |
-     gphoto2            | []  []                    []    []     [] []       |
-     gprof              | []  []  []                      []                 |
-     gpsdrive           |            []                   []     []          |
-     gramadoir          |     []  []                      []                 |
-     grep               | []                                     []          |
-     grub               | []                        []    []     []          |
-     gsasl              | []  []  []                      []     []          |
-     gss                | []  []  []                      []     []          |
-     gst-plugins-bad    | []  []                    []    []     [] []       |
-     gst-plugins-base   | []  []                    []    []     [] []       |
-     gst-plugins-good   | []  []                    []    []     [] []       |
-     gst-plugins-ugly   | []  []                    []    []     [] []       |
-     gstreamer          | []  []                    []    []     []          |
-     gtick              | []  []  []                      []     []          |
-     gtkam              |     []                    []    []     [] []       |
-     gtkorphan          |     []                          []     []          |
-     gtkspell           | []  []  [] []             [] [] []     [] []       |
-     gutenprint         | []  []                    []           []          |
-     hello              | []      []                      []                 |
-     help2man           | []  []                                             |
-     hylafax            |                                 []                 |
-     idutils            | []  []  []                []    []     []          |
-     indent             | []  []  [] []             []    []     [] []       |
-     iso_15924          | []  ()                          []     []          |
-     iso_3166           | []  ()  [] [] [] [] [] [] []    []     [] []       |
-     iso_3166_2         |     ()                    []    []     []          |
-     iso_4217           | []  ()                    []    []     [] []       |
-     iso_639            | []  ()  []    []          []    []     [] []    [] |
-     iso_639_3          |     ()                                 []       [] |
-     jwhois             | []  []                    []    []     []          |
-     kbd                |     []                          []                 |
-     keytouch           | []  []  []                []    []     []          |
-     keytouch-editor    | []      []                []    []     []          |
-     keytouch-keyboa... | []      []                []    []     []          |
-     klavaro            |            []             []                       |
-     latrine            | []                              []     []          |
-     ld                 | []  []  []                      []                 |
-     leafpad            | []  []  []       []       []    []     [] ()       |
-     libc               | []  []     []                   []        []       |
-     libexif            |                                        []          |
-     libextractor       |                                                    |
-     libgnutls          |     []                                 []          |
-     libgpewidget       | []      []                      []        []       |
-     libgpg-error       |     []                                 []          |
-     libgphoto2         |     []                                 [] []       |
-     libgphoto2_port    |     []                                 [] []       |
-     libgsasl           | []  []  []                      []     []          |
-     libiconv           | []  []  []                      []     [] []       |
-     libidn             | []  []                          []     []          |
-     lifelines          |     ()                                             |
-     liferea            |     []                    []           [] []       |
-     lilypond           | []  []                                             |
-     linkdr             | []               []    [] []           []          |
-     lordsawar          |                                                    |
-     lprng              |                                 []                 |
-     lynx               |     []                    []    []     [] []       |
-     m4                 | []  []  [] []                   []        []       |
-     mailfromd          |                                                    |
-     mailutils          |     []                          []                 |
-     make               | []  []  [] []    []    []       []     [] []       |
-     man-db             |                                 []     []          |
-     man-db-manpages    |                                 []                 |
-     minicom            | []  []                    []    []        []       |
-     mkisofs            | []  []                          []     []          |
-     myserver           |                                                    |
-     nano               | []  []  [] []             []           []          |
-     opcodes            | []  []  []                      []                 |
-     parted             |     []                          []     [] []       |
-     pies               |                                                    |
-     popt               | []  []  [] []             []    []  [] [] []       |
-     psmisc             | []  []                          []                 |
-     pspp               |                                                    |
-     pwdutils           |     []                          []                 |
-     radius             |     []                          []                 |
-     recode             | []  []  [] []    []       []    []     []          |
-     rosegarden         | ()  ()                          ()     () ()       |
-     rpm                |                                 []        []       |
-     rush               |                                                    |
-     sarg               |     []                                             |
-     screem             |                                        [] []       |
-     scrollkeeper       | []                        []    []     []          |
-     sed                | []  []  [] []             []    []     [] []       |
-     sharutils          | []  []  []                []    []     [] []       |
-     shishi             |     []                                             |
-     skencil            |     []                                             |
-     solfege            | []  []     []                          []          |
-     solfege-manual     |     []     []                                      |
-     soundtracker       |     []                                 []          |
-     sp                 |     []                                    ()       |
-     sysstat            | []  []                          []     [] []       |
-     tar                | []  []  []                []    []     [] []       |
-     texinfo            |     []                          []     [] []       |
-     tin                |     []                                             |
-     unicode-han-tra... |                                                    |
-     unicode-transla... |     []  []                                         |
-     util-linux-ng      | []  []                    []    []     [] []       |
-     vice               |     ()                    ()           ()          |
-     vmm                |     []                                             |
-     vorbis-tools       |                                 []                 |
-     wastesedge         |     ()                                 ()          |
-     wdiff              | []                                                 |
-     wget               | []  []  []             [] []    []     [] []       |
-     wyslij-po          | []  []                          []                 |
-     xchat              | []  []        []    []    []    []     [] []    [] |
-     xdg-user-dirs      | []  []  [] [] [] [] []    []    []  [] [] []    [] |
-     xkeyboard-config   | []  []                    []    []     []          |
-                        +----------------------------------------------------+
-                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
-                          105 121 53 20  4  8  3  5 53  2 120  5 84 67  0  4
-
-                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
-                        +-----------------------------------------------+
-     a2ps               |                               []              |
-     aegis              |                                               |
-     ant-phone          |                                               |
-     anubis             |                               []    []        |
-     aspell             |                         []                    |
-     bash               |                                               |
-     bfd                |                                               |
-     bibshelf           |                []             []              |
-     binutils           |                                               |
-     bison              |                               []              |
-     bison-runtime      |       []    [] []             []    []        |
-     bluez-pin          |    [] []    [] []             []              |
-     bombono-dvd        |                                               |
-     buzztard           |                                               |
-     cflow              |                                               |
-     clisp              |                                               |
-     coreutils          |          []                                   |
-     cpio               |                                               |
-     cppi               |                                               |
-     cpplib             |                                               |
-     cryptsetup         |                                               |
-     dfarc              |                   []                          |
-     dialog             |    []       [] []             []    []        |
-     dico               |                                               |
-     diffutils          |                []             []              |
-     dink               |                                               |
-     doodle             |                                               |
-     e2fsprogs          |                                               |
-     enscript           |                                               |
-     exif               |                []                             |
-     fetchmail          |                                               |
-     findutils          |                                               |
-     flex               |                                               |
-     freedink           |                                     []        |
-     gas                |                                               |
-     gawk               |                                               |
-     gcal               |                                               |
-     gcc                |                                               |
-     gettext-examples   |       []       []             [] []           |
-     gettext-runtime    | []                                            |
-     gettext-tools      | []                                            |
-     gip                |                []             []              |
-     gjay               |                                               |
-     gliv               |                                               |
-     glunarclock        |                []                             |
-     gnubiff            |                                               |
-     gnucash            | ()          ()                      ()     () |
-     gnuedu             |                                               |
-     gnulib             |                                               |
-     gnunet             |                                               |
-     gnunet-gtk         |                                               |
-     gnutls             |                               []              |
-     gold               |                                               |
-     gpe-aerial         |                []                             |
-     gpe-beam           |                []                             |
-     gpe-bluetooth      |                []                []           |
-     gpe-calendar       |                []                             |
-     gpe-clock          | []    []       []             [] []           |
-     gpe-conf           | []             []                             |
-     gpe-contacts       | []             []                             |
-     gpe-edit           |                []                             |
-     gpe-filemanager    | []             []                             |
-     gpe-go             | []             []                []           |
-     gpe-login          |                []                             |
-     gpe-ownerinfo      |                []             []              |
-     gpe-package        | []             []                             |
-     gpe-sketchbook     | []             []                             |
-     gpe-su             | []    []       []             [] [] []        |
-     gpe-taskmanager    | [] [] []       []             [] []           |
-     gpe-timesheet      |                []             []              |
-     gpe-today          |       []       []             [] []           |
-     gpe-todo           |                []                   []        |
-     gphoto2            |                                               |
-     gprof              |                               []              |
-     gpsdrive           |                                               |
-     gramadoir          |                                               |
-     grep               |                                               |
-     grub               |                                               |
-     gsasl              |                                               |
-     gss                |                                               |
-     gst-plugins-bad    |             [] []                [] []        |
-     gst-plugins-base   |             [] []                             |
-     gst-plugins-good   |                []                []           |
-     gst-plugins-ugly   |             [] []             [] [] []        |
-     gstreamer          |                                               |
-     gtick              |                                               |
-     gtkam              |                                     []        |
-     gtkorphan          |                []                      []     |
-     gtkspell           |       []    [] []       []    []    [] []     |
-     gutenprint         |                                               |
-     hello              | []             []             []              |
-     help2man           |                                               |
-     hylafax            |                                               |
-     idutils            |                                               |
-     indent             |                                               |
-     iso_15924          |             [] []                             |
-     iso_3166           | [] []       () [] [] []    []       []        |
-     iso_3166_2         |                                               |
-     iso_4217           |             []                      []        |
-     iso_639            |                      []    []                 |
-     iso_639_3          |                            []                 |
-     jwhois             |                []                             |
-     kbd                |                                               |
-     keytouch           |                []                             |
-     keytouch-editor    |                []                             |
-     keytouch-keyboa... |                []                             |
-     klavaro            |                                     []        |
-     latrine            |                []                             |
-     ld                 |                                               |
-     leafpad            | []          [] []                             |
-     libc               | []                                            |
-     libexif            |                                               |
-     libextractor       |                                               |
-     libgnutls          |                               []              |
-     libgpewidget       |                []             []              |
-     libgpg-error       |                                               |
-     libgphoto2         |                                               |
-     libgphoto2_port    |                                               |
-     libgsasl           |                                               |
-     libiconv           |                                               |
-     libidn             |                                               |
-     lifelines          |                                               |
-     liferea            |                                               |
-     lilypond           |                                               |
-     linkdr             |                                               |
-     lordsawar          |                                               |
-     lprng              |                                               |
-     lynx               |                                               |
-     m4                 |                                               |
-     mailfromd          |                                               |
-     mailutils          |                                               |
-     make               | []                                            |
-     man-db             |                                               |
-     man-db-manpages    |                                               |
-     minicom            |                                     []        |
-     mkisofs            |                                               |
-     myserver           |                                               |
-     nano               |                               []    []        |
-     opcodes            |                                               |
-     parted             |                                               |
-     pies               |                                               |
-     popt               | []             []                   []        |
-     psmisc             |                                               |
-     pspp               |                                               |
-     pwdutils           |                                               |
-     radius             |                                               |
-     recode             |                                               |
-     rosegarden         |                                               |
-     rpm                |                                               |
-     rush               |                                               |
-     sarg               |                                               |
-     screem             |                                               |
-     scrollkeeper       |                                     []     [] |
-     sed                |                                               |
-     sharutils          |                                               |
-     shishi             |                                               |
-     skencil            |                                               |
-     solfege            |                                     []        |
-     solfege-manual     |                                               |
-     soundtracker       |                                               |
-     sp                 |                                               |
-     sysstat            |                []                             |
-     tar                |       []                                      |
-     texinfo            |                                     []        |
-     tin                |                                               |
-     unicode-han-tra... |                                               |
-     unicode-transla... |                                               |
-     util-linux-ng      |                                               |
-     vice               |                                               |
-     vmm                |                                               |
-     vorbis-tools       |                                               |
-     wastesedge         |                                               |
-     wdiff              |                                               |
-     wget               |             []                                |
-     wyslij-po          |                                               |
-     xchat              | []             [] []                          |
-     xdg-user-dirs      | [] []       [] [] []       []       [] []     |
-     xkeyboard-config   | []    []    []                                |
-                        +-----------------------------------------------+
-                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
-                          20  5 10  1 13 48  4  2  2  4 24 10 20  3   1
-
-                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
-                        +---------------------------------------------------+
-     a2ps               | []           []     []  []   [] []       []    [] |
-     aegis              | []                      []      []                |
-     ant-phone          |                         []   []                   |
-     anubis             | []           []                 []                |
-     aspell             | []                           [] []    [] []       |
-     bash               | []                                    []          |
-     bfd                |                                 []                |
-     bibshelf           | []  []                                            |
-     binutils           |                                 []    []          |
-     bison              | []           []                 []                |
-     bison-runtime      | []           []     []  []   [] []       []       |
-     bluez-pin          | []           []         []   [] []    [] []    [] |
-     bombono-dvd        |     []                          ()                |
-     buzztard           | []  []                                            |
-     cflow              |              []                                   |
-     clisp              | []                              []                |
-     coreutils          | []           []     []  []      []       []       |
-     cpio               | []           []                 []                |
-     cppi               |              []                                   |
-     cpplib             | []                                                |
-     cryptsetup         | []                                                |
-     dfarc              |              []                                   |
-     dialog             | []           []         []      []                |
-     dico               |              []                                   |
-     diffutils          | []           []         []   [] []             [] |
-     dink               | ()                                                |
-     doodle             | []                                          []    |
-     e2fsprogs          | []           []                                   |
-     enscript           | []                      []   [] []       []       |
-     exif               | []           []              [] ()    []          |
-     fetchmail          | []           []                 []          []    |
-     findutils          | []           []     []          []       []       |
-     flex               | []           []         []   [] []                |
-     freedink           | []           []                                   |
-     gas                |                                                   |
-     gawk               | []           []         []   []                   |
-     gcal               |                                                   |
-     gcc                |                                                [] |
-     gettext-examples   | []           []     []       [] []    [] []    [] |
-     gettext-runtime    | []  []       []     []       [] []    [] []    [] |
-     gettext-tools      |              []              [] []    [] []    [] |
-     gip                | []           []                 []    []       [] |
-     gjay               |                                                   |
-     gliv               | []           []         []   [] []    []          |
-     glunarclock        | []                      []   []       []       [] |
-     gnubiff            | []                           ()                   |
-     gnucash            | []           ()         ()      ()                |
-     gnuedu             | []                                                |
-     gnulib             | []           []                 []       []       |
-     gnunet             |                                                   |
-     gnunet-gtk         |                                                   |
-     gnutls             | []           []                                   |
-     gold               |                                                   |
-     gpe-aerial         | []                  []  []   [] []       []    [] |
-     gpe-beam           | []                  []  []   [] []       []    [] |
-     gpe-bluetooth      | []                      []                        |
-     gpe-calendar       |                         []      []       []    [] |
-     gpe-clock          | []                  []  []   [] []    [] []    [] |
-     gpe-conf           | []                  []  []   [] []    [] []       |
-     gpe-contacts       |                         []   [] []       []    [] |
-     gpe-edit           | []           []                          []       |
-     gpe-filemanager    | []                              []       []       |
-     gpe-go             | []           []         []   [] []    [] []    [] |
-     gpe-login          | []                      []                        |
-     gpe-ownerinfo      | []                  []  []   [] []    [] []    [] |
-     gpe-package        | []                                       []       |
-     gpe-sketchbook     | []                  []  []   [] []       []    [] |
-     gpe-su             | []                  []  []   [] []    [] []    [] |
-     gpe-taskmanager    | []                  []  []   [] []    [] []    [] |
-     gpe-timesheet      | []                  []  []   [] []    [] []    [] |
-     gpe-today          | []                  []  []   [] []    [] []    [] |
-     gpe-todo           | []                      []      []       []    [] |
-     gphoto2            | []        [] []         []   [] []    []       [] |
-     gprof              | []                      []   []                   |
-     gpsdrive           | []                              []                |
-     gramadoir          | []                                    []          |
-     grep               | []           []                 []    []          |
-     grub               | []           []                 []                |
-     gsasl              | []           []                       []       [] |
-     gss                |              []              []       []          |
-     gst-plugins-bad    | []           []         []      []    []    []    |
-     gst-plugins-base   | []           []         []      []    []          |
-     gst-plugins-good   | []           []         []      []    []          |
-     gst-plugins-ugly   | []           []         []      []    [] []       |
-     gstreamer          | []           []         []      []    []          |
-     gtick              | []                              []    []          |
-     gtkam              | []        [] []         []      []    []          |
-     gtkorphan          | []                                                |
-     gtkspell           | []           []     []  []   [] []    [] [] [] [] |
-     gutenprint         | []                              []                |
-     hello              | []           []                       [] []       |
-     help2man           |              []                 []                |
-     hylafax            | []                                                |
-     idutils            | []           []         []   [] []                |
-     indent             | []           []         []   [] []    []       [] |
-     iso_15924          | []           []                 []       []       |
-     iso_3166           | []  [] [] [] []     ()  []   [] [] [] [] [] [] [] |
-     iso_3166_2         | []           []                          []       |
-     iso_4217           | []  []       []     []          [] []    []    [] |
-     iso_639            | []     [] [] []                 [] [] [] []    [] |
-     iso_639_3          |        [] []                                      |
-     jwhois             | []           []         []   []                   |
-     kbd                | []           []              []                   |
-     keytouch           | []           []                       []          |
-     keytouch-editor    | []           []                       []          |
-     keytouch-keyboa... | []           []                       []          |
-     klavaro            | []                      []                        |
-     latrine            |              []                 []                |
-     ld                 |                                                   |
-     leafpad            | []  []       []     []  []      []    [] []    [] |
-     libc               | []           []                 []    []          |
-     libexif            | []           []         ()            []          |
-     libextractor       |                                                   |
-     libgnutls          | []           []                                   |
-     libgpewidget       | []           []                          []       |
-     libgpg-error       |              []              []                   |
-     libgphoto2         | []           []                                   |
-     libgphoto2_port    | []           []         []      []    []          |
-     libgsasl           | []           []              []       []       [] |
-     libiconv           | []           []                       [] []    [] |
-     libidn             | []           []                                   |
-     lifelines          | []           []                                   |
-     liferea            | []           []     []  []   [] ()    ()    []    |
-     lilypond           | []                                                |
-     linkdr             | []                  []          []                |
-     lordsawar          |                                                   |
-     lprng              |              []                                   |
-     lynx               | []                      []      []                |
-     m4                 | []           []         []   [] []                |
-     mailfromd          |              []                                   |
-     mailutils          |              []                                   |
-     make               | []           []         []      []                |
-     man-db             | []           []                 []                |
-     man-db-manpages    | []           []                 []                |
-     minicom            |              []         []   [] []                |
-     mkisofs            | []           []                 []                |
-     myserver           |                                                   |
-     nano               | []           []         []      []                |
-     opcodes            | []                           []                   |
-     parted             | []           []                 []    []          |
-     pies               |              []                                   |
-     popt               | []           []     []          []                |
-     psmisc             | []           []                 []                |
-     pspp               | []                      []                        |
-     pwdutils           |              []                                   |
-     radius             | []           []                 []                |
-     recode             | []           []     []  []   [] []    [] []       |
-     rosegarden         |              ()                 ()                |
-     rpm                | []           []     []                            |
-     rush               | []           []                                   |
-     sarg               |                                                   |
-     screem             |                                                   |
-     scrollkeeper       | []  []       []              [] []    []    [] [] |
-     sed                | []           []     []  []   [] []    [] []    [] |
-     sharutils          | []           []                 []             [] |
-     shishi             |              []                                   |
-     skencil            |                     []  []                        |
-     solfege            | []           []         []      []                |
-     solfege-manual     | []           []         []                        |
-     soundtracker       |                                       []          |
-     sp                 |                                                   |
-     sysstat            | []           []         []      []                |
-     tar                | []           []                 []       []       |
-     texinfo            | []           []              [] []                |
-     tin                |                                 []                |
-     unicode-han-tra... |                                                   |
-     unicode-transla... |                                                   |
-     util-linux-ng      | []           []         []      []       []       |
-     vice               | []                                                |
-     vmm                | []                                                |
-     vorbis-tools       | []           []                                   |
-     wastesedge         | []                                                |
-     wdiff              | []           []                                   |
-     wget               | []           []     []  []      []    [] []       |
-     wyslij-po          | []  []       []                                   |
-     xchat              | []        [] []     []          []    [] [] [] [] |
-     xdg-user-dirs      | []  [] [] [] []  [] []  []   [] []    [] [] [] [] |
-     xkeyboard-config   | []           []                 []                |
-                        +---------------------------------------------------+
-                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
-                          135 10  4  7 105  1 29  62   47 91  3 54 46  9 37
-
-                          sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
-                        +---------------------------------------------------+
-     a2ps               | []              [] [] [] []                       | 27
-     aegis              |                          []                       |  9
-     ant-phone          | []                 []    []      []               |  9
-     anubis             | []                 [] [] []                       | 15
-     aspell             |                       [] []  []                   | 20
-     bash               | []                    [] []                       | 12
-     bfd                |                          []                       |  6
-     bibshelf           | []                       []      []               | 16
-     binutils           |                       [] []                       |  8
-     bison              | []                       []                       | 12
-     bison-runtime      | []              []    [] []      []          []   | 29
-     bluez-pin          | []              [] [] [] []  []  []          []   | 37
-     bombono-dvd        |                          []                       |  4
-     buzztard           |                          []                       |  7
-     cflow              |                       [] []      []               |  9
-     clisp              |                                                   | 10
-     coreutils          | []                    [] []      []               | 22
-     cpio               | []                 [] [] []      []          []   | 13
-     cppi               |                       [] []                       |  5
-     cpplib             | []                 [] [] []      []          []   | 14
-     cryptsetup         | []                       []                       |  7
-     dfarc              |                          []                       |  9
-     dialog             | []  []          []       []  []  []          []   | 30
-     dico               |                       []                          |  2
-     diffutils          | []                 [] [] []      []          []   | 30
-     dink               |                                                   |  4
-     doodle             | []                       []                       |  7
-     e2fsprogs          | []                 []    []                       | 11
-     enscript           | []                 [] [] []                       | 17
-     exif               | []                       []      []               | 16
-     fetchmail          |                    []    []      []               | 17
-     findutils          | []                 [] [] []      []               | 20
-     flex               | []                 []    []                  []   | 15
-     freedink           |                          []                       | 10
-     gas                |                    []                             |  4
-     gawk               | []                 []    []      []               | 18
-     gcal               | []                 []                             |  5
-     gcc                | []                 []            []               |  7
-     gettext-examples   | []                 [] [] []      []    []    []   | 34
-     gettext-runtime    | []                 [] [] []      []    []    []   | 29
-     gettext-tools      | []                 [] [] []      []          []   | 22
-     gip                | []                       []      []          []   | 22
-     gjay               |                          []                       |  3
-     gliv               | []                 []    []                       | 14
-     glunarclock        | []                       []  []  []          []   | 19
-     gnubiff            | []                       []                       |  4
-     gnucash            |                    () [] ()      []          ()   | 10
-     gnuedu             |                          []                  []   |  7
-     gnulib             | []                    [] []      []               | 16
-     gnunet             |                          []                       |  1
-     gnunet-gtk         | []                 []    []                       |  5
-     gnutls             | []                       []      []               | 10
-     gold               |                          []                       |  4
-     gpe-aerial         | []                       []      []               | 18
-     gpe-beam           | []                       []      []               | 19
-     gpe-bluetooth      | []                       []      []               | 13
-     gpe-calendar       | []                       []  []  []               | 12
-     gpe-clock          | []                 []    []  []  []               | 28
-     gpe-conf           | []                       []  []  []               | 20
-     gpe-contacts       | []                       []      []               | 17
-     gpe-edit           | []                       []      []               | 12
-     gpe-filemanager    | []                       []  []  []               | 16
-     gpe-go             | []                 []    []  []  []               | 25
-     gpe-login          | []                       []      []               | 11
-     gpe-ownerinfo      | []                 []    []      []          []   | 25
-     gpe-package        | []                       []      []               | 13
-     gpe-sketchbook     | []                       []      []               | 20
-     gpe-su             | []                 []    []  []  []               | 30
-     gpe-taskmanager    | []                 []    []  []  []               | 29
-     gpe-timesheet      | []                 []    []      []          []   | 25
-     gpe-today          | []                 []    []  []  []          []   | 30
-     gpe-todo           | []                       []  []  []               | 17
-     gphoto2            | []                    [] []      []          []   | 24
-     gprof              | []                 []    []                       | 15
-     gpsdrive           | []                       []      []               | 11
-     gramadoir          | []                       []      []               | 11
-     grep               |                 []       []      []               | 10
-     grub               | []                       []      []               | 14
-     gsasl              | []                       []      []          []   | 14
-     gss                | []                       []      []               | 11
-     gst-plugins-bad    | []                 []    []      []               | 26
-     gst-plugins-base   | []                 [] [] []      []               | 24
-     gst-plugins-good   | []                 []    []      []               | 24
-     gst-plugins-ugly   | []                 [] [] []      []               | 29
-     gstreamer          | []                    [] []      []               | 22
-     gtick              |                       [] []      []               | 13
-     gtkam              | []                       []      []               | 20
-     gtkorphan          | []                       []      []               | 14
-     gtkspell           | []              [] [] [] []  []  []    []    []   | 45
-     gutenprint         | []                                                | 10
-     hello              | []              [] []    []      []          []   | 21
-     help2man           | []                       []                       |  7
-     hylafax            |                          []                       |  5
-     idutils            | []                 []    []      []               | 17
-     indent             | []                 [] [] []      []          []   | 30
-     iso_15924          |                 ()    [] ()      []          []   | 16
-     iso_3166           | []        []    () [] [] ()  []  []    []    ()   | 53
-     iso_3166_2         |                 ()    [] ()      []               |  9
-     iso_4217           | []              () [] [] ()      []    []         | 26
-     iso_639            | []     [] []    ()    [] ()  []  []    []    []   | 38
-     iso_639_3          |        []                ()                       |  8
-     jwhois             | []                 []    []      []          []   | 16
-     kbd                | []                 [] [] []      []               | 15
-     keytouch           | []                       []      []               | 16
-     keytouch-editor    | []                       []      []               | 14
-     keytouch-keyboa... | []                       []      []               | 14
-     klavaro            |                          []                       | 11
-     latrine            |                    []    []      []               | 10
-     ld                 | []                 []    []                  []   | 11
-     leafpad            | []                 [] [] []      []          []   | 33
-     libc               | []                 []    []      []          []   | 21
-     libexif            |                          []      ()               |  7
-     libextractor       |                          []                       |  1
-     libgnutls          | []                       []      []               |  9
-     libgpewidget       | []                       []      []               | 14
-     libgpg-error       | []                       []      []               |  9
-     libgphoto2         |                       [] []                       |  8
-     libgphoto2_port    | []                    [] []                  []   | 14
-     libgsasl           | []                       []      []               | 13
-     libiconv           | []                       []  []  []               | 21
-     libidn             | ()                       []      []               | 11
-     lifelines          | []                                                |  4
-     liferea            | []                 []            []               | 21
-     lilypond           |                          []                       |  7
-     linkdr             | []                 []    []      []          []   | 17
-     lordsawar          |                                                   |  1
-     lprng              |                          []                       |  3
-     lynx               | []                 [] [] []                       | 17
-     m4                 | []                       []      []          []   | 19
-     mailfromd          |                       [] []                       |  3
-     mailutils          |                          []                       |  5
-     make               | []                 []    []      []               | 21
-     man-db             | []                       []      []               |  8
-     man-db-manpages    |                                                   |  4
-     minicom            | []                       []                       | 16
-     mkisofs            |                          []      []               |  9
-     myserver           |                                                   |  0
-     nano               | []                       []      []          []   | 21
-     opcodes            | []                 []    []                       | 11
-     parted             | []                 [] [] []                  []   | 15
-     pies               |                       [] []                       |  3
-     popt               | []              [] []    []      []          []   | 27
-     psmisc             | []                       []                       | 11
-     pspp               |                                                   |  4
-     pwdutils           | []                       []                       |  6
-     radius             |                       [] []                       |  9
-     recode             | []                 []    []      []               | 28
-     rosegarden         | ()                                                |  0
-     rpm                | []                       []                  []   | 11
-     rush               |                       [] []                       |  4
-     sarg               |                                                   |  1
-     screem             |                          []                       |  3
-     scrollkeeper       | []                 [] [] []                  []   | 27
-     sed                | []                 []    []      []          []   | 30
-     sharutils          | []                 []    []      []          []   | 22
-     shishi             |                          []                       |  3
-     skencil            | []                       []                       |  7
-     solfege            | []                 []    []      []               | 16
-     solfege-manual     |                    []                             |  8
-     soundtracker       | []                 []    []                       |  9
-     sp                 |                    []                             |  3
-     sysstat            |                          []      []               | 15
-     tar                | []                 [] [] []      []          []   | 23
-     texinfo            | []                 [] [] []      []               | 17
-     tin                |                                                   |  4
-     unicode-han-tra... |                                                   |  0
-     unicode-transla... |                                                   |  2
-     util-linux-ng      | []                 [] [] []                       | 20
-     vice               | ()                 ()                             |  1
-     vmm                |                          []                       |  4
-     vorbis-tools       |                          []                       |  6
-     wastesedge         |                                                   |  2
-     wdiff              | []                       []                       |  7
-     wget               | []                 []    []      []          []   | 26
-     wyslij-po          |                       [] []                       |  8
-     xchat              | []              []    [] []      []          []   | 36
-     xdg-user-dirs      | []     [] []    [] [] [] []      []    []    []   | 63
-     xkeyboard-config   | []                    [] []                       | 22
-                        +---------------------------------------------------+
-       85 teams           sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
-      178 domains         119  1  3  3  0 10 65 51 155 17  98     7    41    2618
-
-   Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect.  This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
-   For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer.  There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
-   If June 2010 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites.  The most up-to-date
-matrix with full percentage details can be found at
-`http://translationproject.org/extra/matrix.html'.
-
-1.5 Using `gettext' in new packages
-===================================
-
-If you are writing a freely available program and want to
-internationalize it you are welcome to use GNU `gettext' in your
-package.  Of course you have to respect the GNU Library General Public
-License which covers the use of the GNU `gettext' library.  This means
-in particular that even non-free programs can use `libintl' as a shared
-library, whereas only free software can use `libintl' as a static
-library or use modified versions of `libintl'.
-
-   Once the sources are changed appropriately and the setup can handle
-the use of `gettext' the only thing missing are the translations.  The
-Free Translation Project is also available for packages which are not
-developed inside the GNU project.  Therefore the information given above
-applies also for every other Free Software Project.  Contact
-`coordinator@translationproject.org' to make the `.pot' files available
-to the translation teams.
-
diff --git a/Android.mk b/Android.mk
deleted file mode 100644
index 870bf33..0000000
--- a/Android.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-SUB_MAKEFILES := $(call all-subdir-makefiles)
-COMMON_ALSA_UTILS_INCLUDES := $(LOCAL_PATH)/include \
-                              $(call include-path-for, libasound)
-COMMON_ALSA_UTILS_CFLAGS := -D_GNU_SOURCE
-COMMON_ALSA_UTILS_LIBS := asound
-
-include $(SUB_MAKEFILES)
diff --git a/INSTALL b/INSTALL
index 544d5d2..202c491 100644
--- a/INSTALL
+++ b/INSTALL
@@ -24,11 +24,11 @@
 header file asoundlib.h in $prefix/include/alsa directory (usually in
 /usr/include/alsa directory).
 
-Compilation from git sources
+Compilation from HG sources
 ---------------------------
 
 You need also GNU packages autoconf and automake installed in your system
-to compile git sources of alsa-utils package.
+to compile HG (Mercurial) sources of alsa-utils package.
 
 For compilation you can use these commands:
 
@@ -40,7 +40,7 @@
 	./configure
 	make
 
-The included gitcompile script does this job for you.
+The included hgcompile script does this job for you.
 
 Note: Some automake packages have missing aclocal program. Use newer version
       in the case.
diff --git a/LICENSE b/LICENSE
new file mode 120000
index 0000000..d24842f
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1 @@
+COPYING
\ No newline at end of file
diff --git a/Makefile.am b/Makefile.am
index 5d5c38e..21d69ab 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -23,7 +23,7 @@
 SUBDIRS += seq
 endif
 
-EXTRA_DIST= config.rpath  TODO gitcompile
+EXTRA_DIST= TODO gitcompile
 AUTOMAKE_OPTIONS=foreign
 ACLOCAL_AMFLAGS = -I m4
 
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 89c668d..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,797 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@ALSAMIXER_TRUE@am__append_1 = alsamixer
-@HAVE_MIXER_TRUE@am__append_2 = amixer
-@HAVE_RAWMIDI_TRUE@am__append_3 = amidi
-@ALSACONF_TRUE@am__append_4 = alsaconf
-@HAVE_PCM_TRUE@am__append_5 = aplay iecset speaker-test
-@ALSALOOP_TRUE@@HAVE_PCM_TRUE@am__append_6 = alsaloop
-@HAVE_SEQ_TRUE@am__append_7 = seq
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/alsaconf/po/Makefile.in \
-	$(top_srcdir)/configure ABOUT-NLS COPYING ChangeLog INSTALL \
-	TODO config.guess config.rpath config.sub install-sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES = alsaconf/po/Makefile
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	cscope distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DIST_SUBDIRS = include alsactl alsaucm utils m4 po alsamixer amixer \
-	amidi alsaconf aplay iecset speaker-test alsaloop seq
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-SUBDIRS = include alsactl alsaucm utils m4 po $(am__append_1) \
-	$(am__append_2) $(am__append_3) $(am__append_4) \
-	$(am__append_5) $(am__append_6) $(am__append_7)
-EXTRA_DIST = config.rpath  TODO gitcompile
-AUTOMAKE_OPTIONS = foreign
-ACLOCAL_AMFLAGS = -I m4
-DISTCHECK_CONFIGURE_FLAGS = \
-        --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
-
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-alsaconf/po/Makefile: $(top_builddir)/config.status $(top_srcdir)/alsaconf/po/Makefile.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-cscopelist-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-
-clean-cscope:
-	-rm -f cscope.files
-
-cscope.files: clean-cscope cscopelist-recursive cscopelist
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-hook
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
-	cscopelist-recursive ctags-recursive install-am \
-	install-data-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-cscope \
-	clean-generic cscope cscopelist cscopelist-recursive ctags \
-	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
-	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
-	distclean distclean-generic distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-data-hook install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
-
-
-rpm: dist
-	$(MAKE) -C $@
-
-dist-hook:
-	-chmod -R a+r $(distdir)
-	@if ! test -z "$(AMTAR)"; then \
-		$(AMTAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
-	else \
-		$(TAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
-	fi
-
-install-data-hook:
-	$(MKDIR_P) -m 0755 $(DESTDIR)$(ASOUND_STATE_DIR)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/NOTICE b/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index 2d6f36a..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,1409 +0,0 @@
-# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-dnl Configure Paths for Alsa
-dnl Some modifications by Richard Boulton <richard-alsa@tartarus.org>
-dnl Christopher Lansdown <lansdoct@cs.alfred.edu>
-dnl Jaroslav Kysela <perex@perex.cz>
-dnl Last modification: $Id: alsa.m4,v 1.24 2004/09/15 18:48:07 tiwai Exp $
-dnl AM_PATH_ALSA([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for libasound, and define ALSA_CFLAGS and ALSA_LIBS as appropriate.
-dnl enables arguments --with-alsa-prefix=
-dnl                   --with-alsa-enc-prefix=
-dnl                   --disable-alsatest
-dnl
-dnl For backwards compatibility, if ACTION_IF_NOT_FOUND is not specified,
-dnl and the alsa libraries are not found, a fatal AC_MSG_ERROR() will result.
-dnl
-AC_DEFUN([AM_PATH_ALSA],
-[dnl Save the original CFLAGS, LDFLAGS, and LIBS
-alsa_save_CFLAGS="$CFLAGS"
-alsa_save_LDFLAGS="$LDFLAGS"
-alsa_save_LIBS="$LIBS"
-alsa_found=yes
-
-dnl
-dnl Get the cflags and libraries for alsa
-dnl
-AC_ARG_WITH(alsa-prefix,
-[  --with-alsa-prefix=PFX  Prefix where Alsa library is installed(optional)],
-[alsa_prefix="$withval"], [alsa_prefix=""])
-
-AC_ARG_WITH(alsa-inc-prefix,
-[  --with-alsa-inc-prefix=PFX  Prefix where include libraries are (optional)],
-[alsa_inc_prefix="$withval"], [alsa_inc_prefix=""])
-
-dnl FIXME: this is not yet implemented
-AC_ARG_ENABLE(alsatest,
-[  --disable-alsatest      Do not try to compile and run a test Alsa program],
-[enable_alsatest="$enableval"],
-[enable_alsatest=yes])
-
-dnl Add any special include directories
-AC_MSG_CHECKING(for ALSA CFLAGS)
-if test "$alsa_inc_prefix" != "" ; then
-	ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix"
-	CFLAGS="$CFLAGS -I$alsa_inc_prefix"
-fi
-AC_MSG_RESULT($ALSA_CFLAGS)
-
-dnl add any special lib dirs
-AC_MSG_CHECKING(for ALSA LDFLAGS)
-if test "$alsa_prefix" != "" ; then
-	ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix"
-	LDFLAGS="$LDFLAGS $ALSA_LIBS"
-fi
-
-dnl add the alsa library
-ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl -lpthread"
-LIBS="$ALSA_LIBS $LIBS"
-AC_MSG_RESULT($ALSA_LIBS)
-
-dnl Check for a working version of libasound that is of the right version.
-if test "x$enable_alsatest" = "xyes"; then
-min_alsa_version=ifelse([$1], ,0.1.1,$1)
-AC_MSG_CHECKING(for libasound headers version >= $min_alsa_version)
-no_alsa=""
-    alsa_min_major_version=`echo $min_alsa_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    alsa_min_minor_version=`echo $min_alsa_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    alsa_min_micro_version=`echo $min_alsa_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
-AC_LANG_SAVE
-AC_LANG_C
-AC_TRY_COMPILE([
-#include <alsa/asoundlib.h>
-], [
-/* ensure backward compatibility */
-#if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
-#define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
-#endif
-#if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
-#define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
-#endif
-#if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
-#define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
-#endif
-
-#  if(SND_LIB_MAJOR > $alsa_min_major_version)
-  exit(0);
-#  else
-#    if(SND_LIB_MAJOR < $alsa_min_major_version)
-#       error not present
-#    endif
-
-#   if(SND_LIB_MINOR > $alsa_min_minor_version)
-  exit(0);
-#   else
-#     if(SND_LIB_MINOR < $alsa_min_minor_version)
-#          error not present
-#      endif
-
-#      if(SND_LIB_SUBMINOR < $alsa_min_micro_version)
-#        error not present
-#      endif
-#    endif
-#  endif
-exit(0);
-],
-  [AC_MSG_RESULT(found.)],
-  [AC_MSG_RESULT(not present.)
-   ifelse([$3], , [AC_MSG_ERROR(Sufficiently new version of libasound not found.)])
-   alsa_found=no]
-)
-AC_LANG_RESTORE
-fi
-
-dnl Now that we know that we have the right version, let's see if we have the library and not just the headers.
-if test "x$enable_alsatest" = "xyes"; then
-AC_CHECK_LIB([asound], [snd_ctl_open],,
-	[ifelse([$3], , [AC_MSG_ERROR(No linkable libasound was found.)])
-	 alsa_found=no]
-)
-fi
-
-if test "x$alsa_found" = "xyes" ; then
-   ifelse([$2], , :, [$2])
-   LIBS=`echo $LIBS | sed 's/-lasound//g'`
-   LIBS=`echo $LIBS | sed 's/  //'`
-   LIBS="-lasound $LIBS"
-fi
-if test "x$alsa_found" = "xno" ; then
-   ifelse([$3], , :, [$3])
-   CFLAGS="$alsa_save_CFLAGS"
-   LDFLAGS="$alsa_save_LDFLAGS"
-   LIBS="$alsa_save_LIBS"
-   ALSA_CFLAGS=""
-   ALSA_LIBS=""
-fi
-
-dnl That should be it.  Now just export out symbols:
-AC_SUBST(ALSA_CFLAGS)
-AC_SUBST(ALSA_LIBS)
-])
-
-
-# intlmacosx.m4 serial 3 (gettext-0.18)
-dnl Copyright (C) 2004-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Checks for special options needed on MacOS X.
-dnl Defines INTL_MACOSX_LIBS.
-AC_DEFUN([gt_INTL_MACOSX],
-[
-  dnl Check for API introduced in MacOS X 10.2.
-  AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
-    [gt_cv_func_CFPreferencesCopyAppValue],
-    [gt_save_LIBS="$LIBS"
-     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
-     AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
-       [CFPreferencesCopyAppValue(NULL, NULL)],
-       [gt_cv_func_CFPreferencesCopyAppValue=yes],
-       [gt_cv_func_CFPreferencesCopyAppValue=no])
-     LIBS="$gt_save_LIBS"])
-  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
-    AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
-      [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
-  fi
-  dnl Check for API introduced in MacOS X 10.3.
-  AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
-    [gt_save_LIBS="$LIBS"
-     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
-     AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
-       [gt_cv_func_CFLocaleCopyCurrent=yes],
-       [gt_cv_func_CFLocaleCopyCurrent=no])
-     LIBS="$gt_save_LIBS"])
-  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
-    AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
-      [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
-  fi
-  INTL_MACOSX_LIBS=
-  if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
-    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
-  fi
-  AC_SUBST([INTL_MACOSX_LIBS])
-])
-
-# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-# 
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
-	_pkg_min_version=m4_default([$1], [0.9.0])
-	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_RESULT([no])
-		PKG_CONFIG=""
-	fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists.  Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
-    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-  m4_default([$2], [:])
-m4_ifvaln([$3], [else
-  $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
-    pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
-    PKG_CHECK_EXISTS([$3],
-                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-		     [pkg_failed=yes])
- else
-    pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
-   	AC_MSG_RESULT([no])
-        _PKG_SHORT_ERRORS_SUPPORTED
-        if test $_pkg_short_errors_supported = yes; then
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
-        else 
-	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
-        fi
-	# Put the nasty error message in config.log where it belongs
-	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
-	m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])
-        ])
-elif test $pkg_failed = untried; then
-     	AC_MSG_RESULT([no])
-	m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
-        ])
-else
-	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-        AC_MSG_RESULT([yes])
-	$3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.12'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.12.2], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.12.2])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 17
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
-      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
-      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
-      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
-      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                    [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D".
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 10 /bin/sh.
-      echo '/* dummy */' > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with '-c' and '-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs.
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested.
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok '-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
-  [--enable-dependency-tracking],
-  [do not reject slow dependency extractors])
-AS_HELP_STRING(
-  [--disable-dependency-tracking],
-  [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named 'Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running 'make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 19
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
-[$0: two- and three-arguments forms are deprecated.  For more info, see:
-http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
-  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
-  [ok:ok],,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility.  To be removed once Automake 1.9.x
-# dies out for good.  For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES([CC])],
-		  [m4_define([AC_PROG_CC],
-			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES([CXX])],
-		  [m4_define([AC_PROG_CXX],
-			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES([OBJC])],
-		  [m4_define([AC_PROG_OBJC],
-			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-dnl Support for Objective C++ was only introduced in Autoconf 2.65,
-dnl but we still cater to Autoconf 2.62.
-m4_ifdef([AC_PROG_OBJCXX],
-[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
-		  [_AM_DEPENDENCIES([OBJCXX])],
-		  [m4_define([AC_PROG_OBJCXX],
-			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well.  Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
-       [enable], [m4_define([am_maintainer_other], [disable])],
-       [disable], [m4_define([am_maintainer_other], [enable])],
-       [m4_define([am_maintainer_other], [enable])
-        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
-  AC_ARG_ENABLE([maintainer-mode],
-    [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
-      am_maintainer_other[ make rules and dependencies not useful
-      (and sometimes confusing) to the casual installer])],
-    [USE_MAINTAINER_MODE=$enableval],
-    [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST([MAINT])dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for 'mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl FIXME to be removed in Automake 1.13.
-AC_DIAGNOSE([obsolete],
-[$0: this macro is deprecated, and will soon be removed.
-You should use the Autoconf-provided 'AC][_PROG_MKDIR_P' macro instead,
-and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.])
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$[*]" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$[*]" != "X $srcdir/configure conftest.file" \
-	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment])
-     fi
-     if test "$[2]" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
-  am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
-  [AC_MSG_CHECKING([that generated files are newer than configure])
-   if test -n "$am_sleep_pid"; then
-     # Hide warnings about reused PIDs.
-     wait $am_sleep_pid 2>/dev/null
-   fi
-   AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip".  However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
-     [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/gettext.m4])
-m4_include([m4/iconv.m4])
-m4_include([m4/lib-ld.m4])
-m4_include([m4/lib-link.m4])
-m4_include([m4/lib-prefix.m4])
-m4_include([m4/nls.m4])
-m4_include([m4/po.m4])
-m4_include([m4/progtest.m4])
-m4_include([acinclude.m4])
diff --git a/alsaconf/Makefile.in b/alsaconf/Makefile.in
deleted file mode 100644
index fafabbf..0000000
--- a/alsaconf/Makefile.in
+++ /dev/null
@@ -1,719 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = alsaconf
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/alsaconf.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES = alsaconf
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-sbin_SCRIPTS = alsaconf
-man_MANS = alsaconf.8 alsaconf.fr.8
-EXTRA_DIST = $(man_MANS)
-SUBDIRS = po
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaconf/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign alsaconf/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-alsaconf: $(top_builddir)/config.status $(srcdir)/alsaconf.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n' \
-	    -e 'h;s|.*|.|' \
-	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
-	      if (++n[d] == $(am__install_max)) { \
-		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
-	    else { print "f", d "/" $$4, $$1 } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	     test -z "$$files" || { \
-	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
-	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
-	     } \
-	; done
-
-uninstall-sbinSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	       sed -e 's,.*/,,;$(transform)'`; \
-	dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-cscopelist-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
-	cscopelist-recursive ctags-recursive install-am install-strip \
-	tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic cscopelist \
-	cscopelist-recursive ctags ctags-recursive distclean \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-man8 install-pdf \
-	install-pdf-am install-ps install-ps-am install-sbinSCRIPTS \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
-	tags-recursive uninstall uninstall-am uninstall-man \
-	uninstall-man8 uninstall-sbinSCRIPTS
-
-
-install-man8:
-	@for i in $(man_MANS); do \
-	  ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
-	  case $$inst in \
-	  *.[a-za-z]*)\
-	    loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
-	    loc="/$$loc"; \
-	    inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
-	  *)\
-	    loc="";; \
-	  esac; \
-	  $(mkinstalldirs) $(DESTDIR)$(mandir)$$loc/man$$ext; \
-	  echo " $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
-	  $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
-	done
-
-uninstall-man8:
-	@for i in $(man_MANS); do \
-	  ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
-	  case $$inst in \
-	  *.[a-za-z]*)\
-	    loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
-	    loc="/$$loc"; \
-	    inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
-	  *)\
-	    loc="";; \
-	  esac; \
-	  echo " rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
-	  rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
-	done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsactl/.gitignore b/alsactl/.gitignore
new file mode 100644
index 0000000..56ab3a2
--- /dev/null
+++ b/alsactl/.gitignore
@@ -0,0 +1,3 @@
+alsa-store.service
+alsa-restore.service
+90-alsa-restore.rules
diff --git a/alsactl/90-alsa-restore.rules.in b/alsactl/90-alsa-restore.rules.in
index 88e12e0..0bcee5b 100644
--- a/alsactl/90-alsa-restore.rules.in
+++ b/alsactl/90-alsa-restore.rules.in
@@ -1,8 +1,2 @@
-ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS!="card*", GOTO="alsa_restore_go"
-GOTO="alsa_restore_end"
-
-LABEL="alsa_restore_go"
-TEST!="@daemonswitch@", RUN+="@sbindir@/alsactl restore $attr{number}"
-TEST=="@daemonswitch@", RUN+="@sbindir@/alsactl nrestore $attr{number}"
-
-LABEL="alsa_restore_end"
+ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS=="card*", \
+        RUN+="@sbindir@/alsactl restore $attr{number}"
diff --git a/alsactl/Android.mk b/alsactl/Android.mk
deleted file mode 100644
index 7a16ccd..0000000
--- a/alsactl/Android.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := alsactl
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := alsactl.c \
-                   daemon.c \
-                   init_parse.c \
-                   lock.c \
-                   state.c \
-                   utils.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/alsactl/Makefile.am b/alsactl/Makefile.am
index bac84eb..c434e44 100644
--- a/alsactl/Makefile.am
+++ b/alsactl/Makefile.am
@@ -7,28 +7,26 @@
 endif
 EXTRA_DIST=alsactl.1 alsactl_init.xml
 
-alsactl_SOURCES=alsactl.c state.c lock.c utils.c init_parse.c daemon.c
-alsactl_CFLAGS=$(AM_CFLAGS) -D__USE_GNU -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" -DSYS_PIDFILE=\"$(ALSACTL_PIDFILE_DIR)/alsactl.pid\"
+alsactl_SOURCES=alsactl.c state.c utils.c init_parse.c
+alsactl_CFLAGS=$(AM_CFLAGS) -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\"
 noinst_HEADERS=alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
 
-udevrules_DATA = \
+dist_udevrules_DATA = \
 	90-alsa-restore.rules
 
 if HAVE_SYSTEMD
 
 systemdsystemunit_DATA = \
-	alsa-state.service \
-	alsa-restore.service \
-	alsa-store.service
+	alsa-store.service \
+	alsa-restore.service
 
 install-data-hook:
 	$(MKDIR_P) -m 0755 \
 		$(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \
 		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants
 	( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \
-		rm -f alsa-state.service alsa-restore.service && \
-		$(LN_S) ../alsa-state.service alsa-state.service && \
-		$(LN_S) ../alsa-restore.service alsa-restore.service)
+	        rm -f alsa-restore.service && \
+		$(LN_S) ../alsa-restore.service alsa-restore.service )
 	( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \
 	        rm -f alsa-store.service && \
 		$(LN_S) ../alsa-store.service alsa-store.service )
@@ -36,32 +34,25 @@
 endif
 
 edit = \
-	$(SED) -r -e 's,@sbindir\@,$(sbindir),g' \
-		  -e 's,@daemonswitch\@,$(ALSACTL_DAEMONSWITCH),g' \
-							< $< > $@ || rm $@
+	$(SED) -r 's,@sbindir\@,$(sbindir),g' < $< > $@ || rm $@
 
-alsa-state.service: alsa-state.service.in
+alsa-store.service: alsa-store.service.in
 	$(edit)
 
 alsa-restore.service: alsa-restore.service.in
 	$(edit)
 
-alsa-store.service: alsa-store.service.in
-	$(edit)
-
 90-alsa-restore.rules: 90-alsa-restore.rules.in
 	$(edit)
 
 EXTRA_DIST += \
-	alsa-state.service.in \
-	alsa-restore.service.in \
 	alsa-store.service.in \
+	alsa-restore.service.in \
 	90-alsa-restore.rules.in
 
 CLEANFILES = \
-	alsa-state.service \
-	alsa-restore.service \
 	alsa-store.service \
+	alsa-restore.service \
 	90-alsa-restore.rules
 
 %.7: %.xml
diff --git a/alsactl/Makefile.in b/alsactl/Makefile.in
deleted file mode 100644
index 73f442a..0000000
--- a/alsactl/Makefile.in
+++ /dev/null
@@ -1,1018 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = alsactl$(EXEEXT)
-@USE_XMLTO_TRUE@am__append_1 = alsactl_init.7
-subdir = alsactl
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
-	"$(DESTDIR)$(man7dir)" "$(DESTDIR)$(systemdsystemunitdir)" \
-	"$(DESTDIR)$(udevrulesdir)"
-PROGRAMS = $(sbin_PROGRAMS)
-am_alsactl_OBJECTS = alsactl-alsactl.$(OBJEXT) alsactl-state.$(OBJEXT) \
-	alsactl-lock.$(OBJEXT) alsactl-utils.$(OBJEXT) \
-	alsactl-init_parse.$(OBJEXT) alsactl-daemon.$(OBJEXT)
-alsactl_OBJECTS = $(am_alsactl_OBJECTS)
-alsactl_LDADD = $(LDADD)
-alsactl_LINK = $(CCLD) $(alsactl_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsactl_SOURCES)
-DIST_SOURCES = $(alsactl_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-man1dir = $(mandir)/man1
-man7dir = $(mandir)/man7
-NROFF = nroff
-MANS = $(man_MANS)
-DATA = $(systemdsystemunit_DATA) $(udevrules_DATA)
-HEADERS = $(noinst_HEADERS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-SUBDIRS = init
-man_MANS = alsactl.1 $(am__append_1)
-EXTRA_DIST = alsactl.1 alsactl_init.xml alsa-state.service.in \
-	alsa-restore.service.in alsa-store.service.in \
-	90-alsa-restore.rules.in
-alsactl_SOURCES = alsactl.c state.c lock.c utils.c init_parse.c daemon.c
-alsactl_CFLAGS = $(AM_CFLAGS) -D__USE_GNU -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" -DSYS_PIDFILE=\"$(ALSACTL_PIDFILE_DIR)/alsactl.pid\"
-noinst_HEADERS = alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
-udevrules_DATA = \
-	90-alsa-restore.rules
-
-@HAVE_SYSTEMD_TRUE@systemdsystemunit_DATA = \
-@HAVE_SYSTEMD_TRUE@	alsa-state.service \
-@HAVE_SYSTEMD_TRUE@	alsa-restore.service \
-@HAVE_SYSTEMD_TRUE@	alsa-store.service
-
-edit = \
-	$(SED) -r -e 's,@sbindir\@,$(sbindir),g' \
-		  -e 's,@daemonswitch\@,$(ALSACTL_DAEMONSWITCH),g' \
-							< $< > $@ || rm $@
-
-CLEANFILES = \
-	alsa-state.service \
-	alsa-restore.service \
-	alsa-store.service \
-	90-alsa-restore.rules
-
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsactl/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign alsactl/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-sbinPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
-
-clean-sbinPROGRAMS:
-	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-alsactl$(EXEEXT): $(alsactl_OBJECTS) $(alsactl_DEPENDENCIES) $(EXTRA_alsactl_DEPENDENCIES) 
-	@rm -f alsactl$(EXEEXT)
-	$(alsactl_LINK) $(alsactl_OBJECTS) $(alsactl_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-alsactl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-daemon.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-init_parse.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-lock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-state.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-utils.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-alsactl-alsactl.o: alsactl.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-alsactl.o -MD -MP -MF $(DEPDIR)/alsactl-alsactl.Tpo -c -o alsactl-alsactl.o `test -f 'alsactl.c' || echo '$(srcdir)/'`alsactl.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-alsactl.Tpo $(DEPDIR)/alsactl-alsactl.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='alsactl.c' object='alsactl-alsactl.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-alsactl.o `test -f 'alsactl.c' || echo '$(srcdir)/'`alsactl.c
-
-alsactl-alsactl.obj: alsactl.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-alsactl.obj -MD -MP -MF $(DEPDIR)/alsactl-alsactl.Tpo -c -o alsactl-alsactl.obj `if test -f 'alsactl.c'; then $(CYGPATH_W) 'alsactl.c'; else $(CYGPATH_W) '$(srcdir)/alsactl.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-alsactl.Tpo $(DEPDIR)/alsactl-alsactl.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='alsactl.c' object='alsactl-alsactl.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-alsactl.obj `if test -f 'alsactl.c'; then $(CYGPATH_W) 'alsactl.c'; else $(CYGPATH_W) '$(srcdir)/alsactl.c'; fi`
-
-alsactl-state.o: state.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-state.o -MD -MP -MF $(DEPDIR)/alsactl-state.Tpo -c -o alsactl-state.o `test -f 'state.c' || echo '$(srcdir)/'`state.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-state.Tpo $(DEPDIR)/alsactl-state.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='state.c' object='alsactl-state.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-state.o `test -f 'state.c' || echo '$(srcdir)/'`state.c
-
-alsactl-state.obj: state.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-state.obj -MD -MP -MF $(DEPDIR)/alsactl-state.Tpo -c -o alsactl-state.obj `if test -f 'state.c'; then $(CYGPATH_W) 'state.c'; else $(CYGPATH_W) '$(srcdir)/state.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-state.Tpo $(DEPDIR)/alsactl-state.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='state.c' object='alsactl-state.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-state.obj `if test -f 'state.c'; then $(CYGPATH_W) 'state.c'; else $(CYGPATH_W) '$(srcdir)/state.c'; fi`
-
-alsactl-lock.o: lock.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-lock.o -MD -MP -MF $(DEPDIR)/alsactl-lock.Tpo -c -o alsactl-lock.o `test -f 'lock.c' || echo '$(srcdir)/'`lock.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-lock.Tpo $(DEPDIR)/alsactl-lock.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lock.c' object='alsactl-lock.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-lock.o `test -f 'lock.c' || echo '$(srcdir)/'`lock.c
-
-alsactl-lock.obj: lock.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-lock.obj -MD -MP -MF $(DEPDIR)/alsactl-lock.Tpo -c -o alsactl-lock.obj `if test -f 'lock.c'; then $(CYGPATH_W) 'lock.c'; else $(CYGPATH_W) '$(srcdir)/lock.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-lock.Tpo $(DEPDIR)/alsactl-lock.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lock.c' object='alsactl-lock.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-lock.obj `if test -f 'lock.c'; then $(CYGPATH_W) 'lock.c'; else $(CYGPATH_W) '$(srcdir)/lock.c'; fi`
-
-alsactl-utils.o: utils.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-utils.o -MD -MP -MF $(DEPDIR)/alsactl-utils.Tpo -c -o alsactl-utils.o `test -f 'utils.c' || echo '$(srcdir)/'`utils.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-utils.Tpo $(DEPDIR)/alsactl-utils.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='utils.c' object='alsactl-utils.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-utils.o `test -f 'utils.c' || echo '$(srcdir)/'`utils.c
-
-alsactl-utils.obj: utils.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-utils.obj -MD -MP -MF $(DEPDIR)/alsactl-utils.Tpo -c -o alsactl-utils.obj `if test -f 'utils.c'; then $(CYGPATH_W) 'utils.c'; else $(CYGPATH_W) '$(srcdir)/utils.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-utils.Tpo $(DEPDIR)/alsactl-utils.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='utils.c' object='alsactl-utils.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-utils.obj `if test -f 'utils.c'; then $(CYGPATH_W) 'utils.c'; else $(CYGPATH_W) '$(srcdir)/utils.c'; fi`
-
-alsactl-init_parse.o: init_parse.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-init_parse.o -MD -MP -MF $(DEPDIR)/alsactl-init_parse.Tpo -c -o alsactl-init_parse.o `test -f 'init_parse.c' || echo '$(srcdir)/'`init_parse.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-init_parse.Tpo $(DEPDIR)/alsactl-init_parse.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='init_parse.c' object='alsactl-init_parse.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-init_parse.o `test -f 'init_parse.c' || echo '$(srcdir)/'`init_parse.c
-
-alsactl-init_parse.obj: init_parse.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-init_parse.obj -MD -MP -MF $(DEPDIR)/alsactl-init_parse.Tpo -c -o alsactl-init_parse.obj `if test -f 'init_parse.c'; then $(CYGPATH_W) 'init_parse.c'; else $(CYGPATH_W) '$(srcdir)/init_parse.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-init_parse.Tpo $(DEPDIR)/alsactl-init_parse.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='init_parse.c' object='alsactl-init_parse.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-init_parse.obj `if test -f 'init_parse.c'; then $(CYGPATH_W) 'init_parse.c'; else $(CYGPATH_W) '$(srcdir)/init_parse.c'; fi`
-
-alsactl-daemon.o: daemon.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-daemon.o -MD -MP -MF $(DEPDIR)/alsactl-daemon.Tpo -c -o alsactl-daemon.o `test -f 'daemon.c' || echo '$(srcdir)/'`daemon.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-daemon.Tpo $(DEPDIR)/alsactl-daemon.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='daemon.c' object='alsactl-daemon.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-daemon.o `test -f 'daemon.c' || echo '$(srcdir)/'`daemon.c
-
-alsactl-daemon.obj: daemon.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-daemon.obj -MD -MP -MF $(DEPDIR)/alsactl-daemon.Tpo -c -o alsactl-daemon.obj `if test -f 'daemon.c'; then $(CYGPATH_W) 'daemon.c'; else $(CYGPATH_W) '$(srcdir)/daemon.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/alsactl-daemon.Tpo $(DEPDIR)/alsactl-daemon.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='daemon.c' object='alsactl-daemon.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-daemon.obj `if test -f 'daemon.c'; then $(CYGPATH_W) 'daemon.c'; else $(CYGPATH_W) '$(srcdir)/daemon.c'; fi`
-install-man1: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man1dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.1[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-install-man7: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man7dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.7[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man7:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man7dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.7[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
-install-systemdsystemunitDATA: $(systemdsystemunit_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(systemdsystemunitdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(systemdsystemunitdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systemdsystemunitdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(systemdsystemunitdir)" || exit $$?; \
-	done
-
-uninstall-systemdsystemunitDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(systemdsystemunitdir)'; $(am__uninstall_files_from_dir)
-install-udevrulesDATA: $(udevrules_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(udevrules_DATA)'; test -n "$(udevrulesdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(udevrulesdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(udevrulesdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(udevrulesdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(udevrulesdir)" || exit $$?; \
-	done
-
-uninstall-udevrulesDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(udevrules_DATA)'; test -n "$(udevrulesdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(udevrulesdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-cscopelist-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(systemdsystemunitdir)" "$(DESTDIR)$(udevrulesdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-@HAVE_SYSTEMD_FALSE@install-data-hook:
-clean: clean-recursive
-
-clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man install-systemdsystemunitDATA \
-	install-udevrulesDATA
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man1 install-man7
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS \
-	uninstall-systemdsystemunitDATA uninstall-udevrulesDATA
-
-uninstall-man: uninstall-man1 uninstall-man7
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
-	cscopelist-recursive ctags-recursive install-am \
-	install-data-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic \
-	clean-sbinPROGRAMS cscopelist cscopelist-recursive ctags \
-	ctags-recursive distclean distclean-compile distclean-generic \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am \
-	install-data-hook install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-man1 install-man7 \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-sbinPROGRAMS install-strip \
-	install-systemdsystemunitDATA install-udevrulesDATA \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am uninstall-man \
-	uninstall-man1 uninstall-man7 uninstall-sbinPROGRAMS \
-	uninstall-systemdsystemunitDATA uninstall-udevrulesDATA
-
-
-@HAVE_SYSTEMD_TRUE@install-data-hook:
-@HAVE_SYSTEMD_TRUE@	$(MKDIR_P) -m 0755 \
-@HAVE_SYSTEMD_TRUE@		$(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \
-@HAVE_SYSTEMD_TRUE@		$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants
-@HAVE_SYSTEMD_TRUE@	( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \
-@HAVE_SYSTEMD_TRUE@		rm -f alsa-state.service alsa-restore.service && \
-@HAVE_SYSTEMD_TRUE@		$(LN_S) ../alsa-state.service alsa-state.service && \
-@HAVE_SYSTEMD_TRUE@		$(LN_S) ../alsa-restore.service alsa-restore.service)
-@HAVE_SYSTEMD_TRUE@	( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \
-@HAVE_SYSTEMD_TRUE@	        rm -f alsa-store.service && \
-@HAVE_SYSTEMD_TRUE@		$(LN_S) ../alsa-store.service alsa-store.service )
-
-alsa-state.service: alsa-state.service.in
-	$(edit)
-
-alsa-restore.service: alsa-restore.service.in
-	$(edit)
-
-alsa-store.service: alsa-store.service.in
-	$(edit)
-
-90-alsa-restore.rules: 90-alsa-restore.rules.in
-	$(edit)
-
-%.7: %.xml
-	xmlto man $?
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsactl/NOTICE b/alsactl/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/alsactl/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/alsactl/alsa-restore.service.in b/alsactl/alsa-restore.service.in
index 245a439..e97d196 100644
--- a/alsactl/alsa-restore.service.in
+++ b/alsactl/alsa-restore.service.in
@@ -1,13 +1,7 @@
-#
-# Note that two different ALSA card state management schemes exist and they
-# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
-#
-
 [Unit]
 Description=Restore Sound Card State
-ConditionPathExists=!@daemonswitch@
 DefaultDependencies=no
-After=alsa-state.service
+After=sysinit.target
 Before=shutdown.target
 Conflicts=shutdown.target
 
diff --git a/alsactl/alsa-state.service.in b/alsactl/alsa-state.service.in
deleted file mode 100644
index 768c5a8..0000000
--- a/alsactl/alsa-state.service.in
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Note that two different ALSA card state management schemes exist and they
-# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
-#
-
-[Unit]
-Description=Manage Sound Card State (restore and store)
-ConditionPathExists=@daemonswitch@
-DefaultDependencies=no
-After=sysinit.target
-Before=shutdown.target
-Conflicts=shutdown.target
-
-[Service]
-Type=simple
-ExecStart=-@sbindir@/alsactl -s -n 19 -c rdaemon
-ExecStop=-@sbindir@/alsactl -s rkill save_and_quit
diff --git a/alsactl/alsa-store.service.in b/alsactl/alsa-store.service.in
index f1a56bb..0e2823c 100644
--- a/alsactl/alsa-store.service.in
+++ b/alsactl/alsa-store.service.in
@@ -1,11 +1,5 @@
-#
-# Note that two different ALSA card state management schemes exist and they
-# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
-#
-
 [Unit]
 Description=Store Sound Card State
-ConditionPathExists=!@daemonswitch@
 DefaultDependencies=no
 Before=shutdown.target
 
diff --git a/alsactl/alsactl.1 b/alsactl/alsactl.1
index 45ac8a6..eb5968c 100644
--- a/alsactl/alsactl.1
+++ b/alsactl/alsactl.1
@@ -1,4 +1,4 @@
-.TH ALSACTL 1 "05 Apr 2013"
+.TH ALSACTL 1 "15 May 2001"
 .SH NAME
 alsactl \- advanced controls for ALSA soundcard driver
 
@@ -21,19 +21,9 @@
 configuration file. If restoring fails (eventually partly), the init
 action is called.
 
-\fInrestore\fP is like \fIrestore\fP, but it notifies also the daemon
-to do new rescan for available soundcards.
-
 \fIinit\fP tries to initialize all devices to a default state. If device
 is not known, error code 99 is returned.
 
-\fIdaemon\fP manages to save periodically the sound state.
-
-\fIrdaemon\fP like \fIdaemon\fP but restore the sound state at first.
-
-\fIkill\fP notifies the daemon to do the specified operation (quit,
-rescan, save_and_quit).
-
 If no soundcards are specified, setup for all cards will be saved or
 loaded.
 
@@ -95,34 +85,10 @@
 useful for "boot" scripts).
 
 .TP
-\fI\-i, \-\-initfile\fP
+\fI\-i, \-\-initfile\fP #=#
 The configuration file for init. By default, PREFIX/share/alsa/init/00main
 is used.
 
-.TP
-\fI\-p, \-\-period\fP
-The store period in seconds for the daemon command.
-
-.TP
-\fI\-e, \-\-pid-file\fP
-The pathname to store the process-id file in the HDB UUCP format (ASCII).
-
-.TP
-\fI\-b, \-\-background\fP
-Run the task in background.
-
-.TP
-\fI\-s, \-\-syslog\fP
-Use syslog for messages.
-
-.TP
-\fI\-n, \-\-nice\fP
-Set the process priority (see 'man nice')
-
-.TP
-\fI\-c, \-\-sched-idle\fP
-Set the process scheduling policy to idle (SCHED_IDLE).
-
 .SH FILES
 \fI/var/lib/alsa/asound.state\fP (or whatever file you specify with the
 \fB\-f\fP flag) is used to store current settings for your
@@ -141,8 +107,7 @@
 \fB
 amixer(1),
 alsamixer(1),
-aplay(1),
-alsactl_init(7)
+aplay(1)
 \fP
 
 .SH BUGS 
diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c
index 75baad8..1792747 100644
--- a/alsactl/alsactl.c
+++ b/alsactl/alsactl.c
@@ -27,143 +27,67 @@
 #include <stdio.h>
 #include <assert.h>
 #include <errno.h>
-#include <syslog.h>
-#include <sched.h>
 #include <alsa/asoundlib.h>
 #include "alsactl.h"
 
 #ifndef SYS_ASOUNDRC
 #define SYS_ASOUNDRC "/var/lib/alsa/asound.state"
 #endif
-#ifndef SYS_PIDFILE
-#define SYS_PIDFILE "/var/run/alsactl.pid"
-#endif
 
 int debugflag = 0;
 int force_restore = 1;
 int ignore_nocards = 0;
-int do_lock = 0;
-int use_syslog = 0;
 char *command;
 char *statefile = NULL;
 
-#define TITLE	0x0100
-#define HEADER	0x0200
-#define FILEARG 0x0400
-#define ENVARG	0x0800
-#define INTARG  0x1000
-#define EMPCMD	0x2000
-#define CARDCMD 0x4000
-#define KILLCMD 0x8000
-
-struct arg {
-	int sarg;
-	char *larg;
-	char *comment;
-};
-
-static struct arg args[] = {
-{ TITLE, NULL, "Usage: alsactl <options> command" },
-{ HEADER, NULL, "global options:" },
-{ 'h', "help", "this help" },
-{ 'd', "debug", "debug mode" },
-{ 'v', "version", "print version of this program" },
-{ HEADER, NULL, "Available state options:" },
-{ FILEARG | 'f', "file", "configuration file (default " SYS_ASOUNDRC ")" },
-{ 'l', "lock", "use file locking to serialize concurrent access" },
-{ 'F', "force", "try to restore the matching controls as much as possible" },
-{ 0, NULL, "  (default mode)" },
-{ 'g', "ignore", "ignore 'No soundcards found' error" },
-{ 'P', "pedantic", "do not restore mismatching controls (old default)" },
-{ 'I', "no-init-fallback", "" },
-{ 0, NULL, "don't initialize even if restore fails" },
-{ FILEARG | 'r', "runstate", "save restore and init state to this file (only errors)" },
-{ 0, NULL, "  default settings is 'no file set'" },
-{ 'R', "remove", "remove runstate file at first, otherwise append errors" },
-{ INTARG | 'p', "period", "store period in seconds for the daemon command" },
-{ FILEARG | 'e', "pid-file", "pathname for the process id (daemon mode)" },
-{ HEADER, NULL, "Available init options:" },
-{ ENVARG | 'E', "env", "set environment variable for init phase (NAME=VALUE)" },
-{ FILEARG | 'i', "initfile", "main configuation file for init phase" },
-{ 0, NULL, "  (default " DATADIR "/init/00main)" },
-{ 'b', "background", "run daemon in background" },
-{ 's', "syslog", "use syslog for messages" },
-{ INTARG | 'n', "nice", "set the process priority (see 'man nice')" },
-{ 'c', "sched-idle", "set the process scheduling policy to idle (SCHED_IDLE)" },
-{ HEADER, NULL, "Available commands:" },
-{ CARDCMD, "store", "save current driver setup for one or each soundcards" },
-{ EMPCMD, NULL, "  to configuration file" },
-{ CARDCMD, "restore", "load current driver setup for one or each soundcards" },
-{ EMPCMD, NULL, "  from configuration file" },
-{ CARDCMD, "nrestore", "like restore, but notify the daemon to rescan soundcards" },
-{ CARDCMD, "init", "initialize driver to a default state" },
-{ CARDCMD, "daemon", "store state periodically for one or each soundcards" },
-{ CARDCMD, "rdaemon", "like daemon but do the state restore at first" },
-{ KILLCMD, "kill", "notify daemon to quit, rescan or save_and_quit" },
-{ 0, NULL, NULL }
-};
-
 static void help(void)
 {
-	struct arg *n = args, *a;
-	char *larg, sa[4], buf[32];
-	int sarg;
-
-	sa[0] = '-';
-	sa[2] = ',';
-	sa[3] = '\0';
-	while (n->comment) {
-		a = n;
-		n++;
-		sarg = a->sarg;
-		if (sarg & (HEADER|TITLE)) {
-			printf("%s%s\n", (sarg & HEADER) != 0 ? "\n" : "",
-								a->comment);
-			continue;
-		}
-		buf[0] = '\0';
-		larg = a->larg;
-		if (sarg & (EMPCMD|CARDCMD|KILLCMD)) {
-			if (sarg & CARDCMD)
-				strcat(buf, "<card>");
-			else if (sarg & KILLCMD)
-				strcat(buf, "<cmd>");
-			printf("  %-8s  %-6s  %s\n", larg ? larg : "",
-							buf, a->comment);
-			continue;
-		}
-		sa[1] = a->sarg;
-		sprintf(buf, "%s%s%s", sa[1] ? sa : "",
-				larg ? "--" : "", larg ? larg : "");
-		if (sarg & ENVARG)
-			strcat(buf, " #=#");
-		else if (sarg & (FILEARG|INTARG))
-			strcat(buf, " #");
-		printf("  %-15s  %s\n", buf, a->comment);
-	}
-}
-
-#define NO_NICE (-100000)
-
-static void do_nice(int use_nice, int sched_idle)
-{
-	struct sched_param sched_param;
-
-	if (use_nice != NO_NICE && nice(use_nice) < 0)
-		error("nice(%i): %s", use_nice, strerror(errno));
-	if (sched_idle) {
-		if (sched_getparam(0, &sched_param) >= 0) {
-			sched_param.sched_priority = 0;
-			if (!sched_setscheduler(0, SCHED_RR, &sched_param))
-				error("sched_setparam failed: %s", strerror(errno));
-		} else {
-			error("sched_getparam failed: %s", strerror(errno));
-		}
-	}
+	printf("Usage: alsactl <options> command\n");
+	printf("\nAvailable global options:\n");
+	printf("  -h,--help        this help\n");
+	printf("  -d,--debug       debug mode\n");
+	printf("  -v,--version     print version of this program\n");
+	printf("\nAvailable state options:\n");
+	printf("  -f,--file #      configuration file (default " SYS_ASOUNDRC ")\n");
+	printf("  -F,--force       try to restore the matching controls as much as possible\n");
+	printf("                   (default mode)\n");
+	printf("  -g,--ignore      ignore 'No soundcards found' error\n");
+	printf("  -P,--pedantic    do not restore mismatching controls (old default)\n");
+	printf("  -I,--no-init-fallback\n"
+	       "                   don't initialize even if restore fails\n");
+	printf("  -r,--runstate #  save restore and init state to this file (only errors)\n");
+	printf("                   default settings is 'no file set'\n");
+	printf("  -R,--remove      remove runstate file at first, otherwise append errors\n");
+	printf("\nAvailable init options:\n");
+	printf("  -E,--env #=#	   set environment variable for init phase (NAME=VALUE)\n");
+	printf("  -i,--initfile #  main configuation file for init phase (default " DATADIR "/init/00main)\n");
+	printf("\n");
+	printf("\nAvailable commands:\n");
+	printf("  store   <card #> save current driver setup for one or each soundcards\n");
+	printf("                   to configuration file\n");
+	printf("  restore <card #> load current driver setup for one or each soundcards\n");
+	printf("                   from configuration file\n");
+	printf("  init	  <card #> initialize driver to a default state\n");
 }
 
 int main(int argc, char *argv[])
 {
+	static const struct option long_option[] =
+	{
+		{"help", 0, NULL, 'h'},
+		{"file", 1, NULL, 'f'},
+		{"env", 1, NULL, 'E'},
+		{"initfile", 1, NULL, 'i'},
+		{"no-init-fallback", 0, NULL, 'I'},
+		{"force", 0, NULL, 'F'},
+		{"ignore", 0, NULL, 'g'},
+		{"pedantic", 0, NULL, 'P'},
+		{"runstate", 0, NULL, 'r'},
+		{"remove", 0, NULL, 'R'},
+		{"debug", 0, NULL, 'd'},
+		{"version", 0, NULL, 'v'},
+		{NULL, 0, NULL, 0},
+	};
 	static const char *const devfiles[] = {
 		"/dev/snd/controlC",
 		"/dev/snd/pcmC",
@@ -173,64 +97,25 @@
 	};
 	char *cfgfile = SYS_ASOUNDRC;
 	char *initfile = DATADIR "/init/00main";
-	char *pidfile = SYS_PIDFILE;
 	char *cardname, ncardname[16];
-	char *cmd;
 	const char *const *tmp;
 	int removestate = 0;
 	int init_fallback = 1; /* new default behavior */
-	int period = 5*60;
-	int background = 0;
-	int daemoncmd = 0;
-	int use_nice = NO_NICE;
-	int sched_idle = 0;
-	struct arg *a;
-	struct option *o;
-	int i, j, k, res;
-	struct option *long_option;
-	char *short_option;
+	int res;
 
-	long_option = calloc(ARRAY_SIZE(args), sizeof(struct option));
-	if (long_option == NULL)
-		exit(EXIT_FAILURE);
-	short_option = malloc(128);
-	if (short_option == NULL) {
-		free(long_option);
-		exit(EXIT_FAILURE);
-	}
-	for (i = j = k = 0; i < ARRAY_SIZE(args); i++) {
-		a = &args[i];
-		if ((a->sarg & 0xff) == 0)
-			continue;
-		o = &long_option[j];
-		o->name = a->larg;
-		o->has_arg = (a->sarg & (ENVARG|FILEARG|INTARG)) != 0;
-		o->flag = NULL;
-		o->val = a->sarg & 0xff;
-		j++;
-		short_option[k++] = o->val;
-		if (o->has_arg)
-			short_option[k++] = ':';
-	}
-	short_option[k] = '\0';
 	command = argv[0];
 	while (1) {
 		int c;
 
-		if ((c = getopt_long(argc, argv, short_option, long_option,
-								  NULL)) < 0)
+		if ((c = getopt_long(argc, argv, "hdvf:FgE:i:IPr:R", long_option, NULL)) < 0)
 			break;
 		switch (c) {
 		case 'h':
 			help();
-			res = EXIT_SUCCESS;
-			goto out;
+			return EXIT_SUCCESS;
 		case 'f':
 			cfgfile = optarg;
 			break;
-		case 'l':
-			do_lock = 1;
-			break;
 		case 'F':
 			force_restore = 1;
 			break;
@@ -240,8 +125,7 @@
 		case 'E':
 			if (putenv(optarg)) {
 				fprintf(stderr, "environment string '%s' is wrong\n", optarg);
-				res = EXIT_FAILURE;
-				goto out;
+				return EXIT_FAILURE;
 			}
 			break;
 		case 'i':
@@ -259,56 +143,24 @@
 		case 'P':
 			force_restore = 0;
 			break;
-		case 'p':
-			period = atoi(optarg);
-			if (period < 10)
-				period = 5*60;
-			else if (period > 24*60*60)
-				period = 24*60*60;
-			break;
-		case 'e':
-			pidfile = optarg;
-			break;
-		case 'b':
-			background = 1;
-			break;
-		case 's':
-			use_syslog = 1;
-			break;
-		case 'n':
-			use_nice = atoi(optarg);
-			if (use_nice < -20)
-				use_nice = -20;
-			else if (use_nice > 19)
-				use_nice = 19;
-			break;
-		case 'c':
-			sched_idle = 1;
-			break;
 		case 'd':
 			debugflag = 1;
 			break;
 		case 'v':
 			printf("alsactl version " SND_UTIL_VERSION_STR "\n");
-			res = EXIT_SUCCESS;
-			goto out;
+			return EXIT_SUCCESS;
 		case '?':		// error msg already printed
 			help();
-			res = EXIT_FAILURE;
-			goto out;
+			return EXIT_FAILURE;
+			break;
 		default:		// should never happen
 			fprintf(stderr, 
 			"Invalid option '%c' (%d) not handled??\n", c, c);
 		}
 	}
-	free(short_option);
-	short_option = NULL;
-	free(long_option);
-	long_option = NULL;
 	if (argc - optind <= 0) {
 		fprintf(stderr, "alsactl: Specify command...\n");
-		res = 0;
-		goto out;
+		return 0;
 	}
 
 	cardname = argc - optind > 1 ? argv[optind + 1] : NULL;
@@ -322,62 +174,20 @@
 		}
 	}
 
-	/* the global system file should be always locked */
-	if (strcmp(cfgfile, SYS_ASOUNDRC) == 0)
-		do_lock = 1;
-
-	/* when running in background, use syslog for reports */
-	if (background) {
-		use_syslog = 1;
-		daemon(0, 0);
-	}
-
-	cmd = argv[optind];
-	daemoncmd = strcmp(cmd, "daemon") == 0 || strcmp(cmd, "rdaemon") == 0;
-
-	if (use_syslog) {
-		openlog("alsactl", LOG_CONS|LOG_PID, LOG_DAEMON);
-		if (daemoncmd)
-			syslog(LOG_INFO, "alsactl " SND_UTIL_VERSION_STR " daemon started");
-	}
-
-	if (!strcmp(cmd, "init")) {
+	if (!strcmp(argv[optind], "init")) {
 		res = init(initfile, cardname);
-		snd_config_update_free_global();
-	} else if (!strcmp(cmd, "store")) {
+	} else if (!strcmp(argv[optind], "store")) {
 		res = save_state(cfgfile, cardname);
-	} else if (!strcmp(cmd, "restore") ||
-                   !strcmp(cmd, "rdaemon") ||
-		   !strcmp(cmd, "nrestore")) {
+	} else if (!strcmp(argv[optind], "restore")) {
 		if (removestate)
 			remove(statefile);
 		res = load_state(cfgfile, initfile, cardname, init_fallback);
-		if (!strcmp(cmd, "rdaemon")) {
-			do_nice(use_nice, sched_idle);
-			res = state_daemon(cfgfile, cardname, period, pidfile);
-		}
-		if (!strcmp(cmd, "nrestore"))
-			res = state_daemon_kill(pidfile, "rescan");
-	} else if (!strcmp(cmd, "daemon")) {
-		do_nice(use_nice, sched_idle);
-		res = state_daemon(cfgfile, cardname, period, pidfile);
-	} else if (!strcmp(cmd, "kill")) {
-		res = state_daemon_kill(pidfile, cardname);
 	} else {
-		fprintf(stderr, "alsactl: Unknown command '%s'...\n", cmd);
+		fprintf(stderr, "alsactl: Unknown command '%s'...\n", 
+			argv[optind]);
 		res = -ENODEV;
 	}
 
 	snd_config_update_free_global();
-	if (use_syslog) {
-		if (daemoncmd)
-			syslog(LOG_INFO, "alsactl daemon stopped");
-		closelog();
-	}
 	return res < 0 ? -res : 0;
-
-out:
-	free(short_option);
-	free(long_option);
-	return res;
 }
diff --git a/alsactl/alsactl.h b/alsactl/alsactl.h
index 9109a70..be90efb 100644
--- a/alsactl/alsactl.h
+++ b/alsactl/alsactl.h
@@ -1,37 +1,77 @@
 extern int debugflag;
 extern int force_restore;
 extern int ignore_nocards;
-extern int do_lock;
-extern int use_syslog;
 extern char *command;
 extern char *statefile;
 
-void info_(const char *fcn, long line, const char *fmt, ...);
-void error_(const char *fcn, long line, const char *fmt, ...);
-void cerror_(const char *fcn, long line, int cond, const char *fmt, ...);
-void dbg_(const char *fcn, long line, const char *fmt, ...);
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define info(...) do {\
+	fprintf(stdout, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+	fprintf(stdout, __VA_ARGS__); \
+	putc('\n', stdout); \
+} while (0)
+#else
+#define info(args...) do {\
+	fprintf(stdout, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+	fprintf(stdout, ##args); \
+	putc('\n', stdout); \
+} while (0)
+#endif	
 
 #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
-#define info(...) do { info_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
-#define error(...) do { error_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
-#define cerror(cond, ...) do { cerror_(__FUNCTION__, __LINE__, (cond) != 0, __VA_ARGS__); } while (0)
-#define dbg(...) do { dbg_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
+#define error(...) do {\
+	fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+	fprintf(stderr, __VA_ARGS__); \
+	putc('\n', stderr); \
+} while (0)
 #else
-#define info(args...) do { info_(__FUNCTION__, __LINE__, ##args); }  while (0)
-#define error(args...) do { error_(__FUNCTION__, __LINE__, ##args); }  while (0)
-#define cerror(cond, ...) do { error_(__FUNCTION__, __LINE__, (cond) != 0, ##args); } while (0)
-#define dbg(args...) do { dbg_(__FUNCTION__, __LINE__, ##args); }  while (0)
+#define error(args...) do {\
+	fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+	fprintf(stderr, ##args); \
+	putc('\n', stderr); \
+} while (0)
+#endif	
+
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define cerror(cond, ...) do {\
+	if (cond || debugflag) { \
+		fprintf(stderr, "%s%s: %s:%d: ", debugflag ? "WARNING: " : "", command, __FUNCTION__, __LINE__); \
+		fprintf(stderr, __VA_ARGS__); \
+		putc('\n', stderr); \
+	} \
+} while (0)
+#else
+#define cerror(cond, args...) do {\
+	if (cond || debugflag) { \
+		fprintf(stderr, "%s%s: %s:%d: ", debugflag ? "WARNING: " : "", command, __FUNCTION__, __LINE__); \
+		fprintf(stderr, ##args); \
+		putc('\n', stderr); \
+	} \
+} while (0)
+#endif	
+
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define dbg(...) do {\
+	if (!debugflag) break; \
+	fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+	fprintf(stderr, __VA_ARGS__); \
+	putc('\n', stderr); \
+} while (0)
+#else
+#define dbg(args...) do {\
+	if (!debugflag) break; \
+	fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+	fprintf(stderr, ##args); \
+	putc('\n', stderr); \
+} while (0)
 #endif	
 
 int init(const char *file, const char *cardname);
-int state_lock(const char *file, int lock, int timeout);
 int save_state(const char *file, const char *cardname);
 int load_state(const char *file, const char *initfile, const char *cardname,
 	       int do_init);
 int power(const char *argv[], int argc);
-int state_daemon(const char *file, const char *cardname, int period,
-		 const char *pidfile);
-int state_daemon_kill(const char *pidfile, const char *cmd);
+int generate_names(const char *cfgfile);
 
 /* utils */
 
@@ -52,5 +92,3 @@
                 return -1;
         return c;
 }
-
-#define ARRAY_SIZE(a) (sizeof (a) / sizeof (a)[0])
diff --git a/alsactl/alsactl_init.xml b/alsactl/alsactl_init.xml
index bce26f5..eefe9ef 100644
--- a/alsactl/alsactl_init.xml
+++ b/alsactl/alsactl_init.xml
@@ -474,15 +474,7 @@
             <varlistentry>
               <term><option>INCLUDE</option></term>
               <listitem>
-                <para>Include the specified filename or files in specified directory.
-		</para>
-		<para>
-		When a directory is specified, only the files with the
-		extension ".conf" are read.
-		Also they are read in the alphabetical order.
-		Thus it's highly recommended to use some number prefix
-		(e.g. "01-something.conf") to assure the order of execucions.
-		</para>
+                <para>Include specified filename or all files in specified directory</para>
               </listitem>
             </varlistentry>
 
diff --git a/alsactl/daemon.c b/alsactl/daemon.c
deleted file mode 100644
index 127701e..0000000
--- a/alsactl/daemon.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- *  Advanced Linux Sound Architecture Control Program
- *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
- *
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#include "aconfig.h"
-#include "version.h"
-#include <getopt.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <assert.h>
-#include <errno.h>
-#include <signal.h>
-#include <time.h>
-#include <poll.h>
-#include <alsa/asoundlib.h>
-#include "alsactl.h"
-
-struct id_list {
-	snd_ctl_elem_id_t **list;
-	int size;
-};
-
-struct card {
-	int index;
-	int pfds;
-	snd_ctl_t *handle;
-	struct id_list whitelist;
-	struct id_list blacklist;
-};
-
-static int quit = 0;
-static int rescan = 0;
-static int save_now = 0;
-
-static void signal_handler_quit(int sig)
-{
-	quit = 1;
-	signal(sig, signal_handler_quit);
-}
-
-static void signal_handler_save_and_quit(int sig)
-{
-	quit = save_now = 1;
-	signal(sig, signal_handler_quit);
-}
-
-static void signal_handler_rescan(int sig)
-{
-	rescan = 1;
-	signal(sig, signal_handler_rescan);
-}
-
-static void free_list(struct id_list *list)
-{
-	int i;
-
-	for (i = 0; i < list->size; i++)
-		free(list->list[i]);
-	free(list->list);
-}
-
-static void card_free(struct card **card)
-{
-	struct card *c = *card;
-
-	free_list(&c->blacklist);
-	free_list(&c->whitelist);
-	if (c->handle)
-		snd_ctl_close(c->handle);
-	free(c);
-	*card = NULL;
-}
-
-static void add_card(struct card ***cards, int *count, const char *cardname)
-{
-	struct card *card, **cc;
-	int i, index, findex;
-	char device[16];
-
-	index = snd_card_get_index(cardname);
-	if (index < 0)
-		return;
-	for (i = 0, findex = -1; i < *count; i++) {
-		if ((*cards)[i] == NULL) {
-			findex = i;
-		} else {
-			if ((*cards)[i]->index == index)
-				return;
-		}
-	}
-	card = calloc(1, sizeof(*card));
-	if (card == NULL)
-		return;
-	card->index = index;
-	sprintf(device, "hw:%i", index);
-	if (snd_ctl_open(&card->handle, device, SND_CTL_READONLY|SND_CTL_NONBLOCK) < 0) {
-		card_free(&card);
-		return;
-	}
-	card->pfds = snd_ctl_poll_descriptors_count(card->handle);
-	if (card->pfds < 0) {
-		card_free(&card);
-		return;
-	}
-	if (snd_ctl_subscribe_events(card->handle, 1) < 0) {
-		card_free(&card);
-		return;
-	}
-	if (findex >= 0) {
-		(*cards)[findex] = card;
-	} else {
-		cc = realloc(*cards, sizeof(void *) * (*count + 1));
-		if (cc == NULL) {
-			card_free(&card);
-			return;
-		}
-		cc[*count] = card;
-		*count = *count + 1;
-		*cards = cc;
-	}
-}
-
-static void add_cards(struct card ***cards, int *count)
-{
-	int card = -1;
-	char cardname[16];
-
-	while (1) {
-		if (snd_card_next(&card) < 0)
-			break;
-		if (card < 0)
-			break;
-		if (card >= 0) {
-			sprintf(cardname, "%i", card);
-			add_card(cards, count, cardname);
-		}
-	}
-}
-
-static int compare_ids(snd_ctl_elem_id_t *id1, snd_ctl_elem_id_t *id2)
-{
-	if (id1 == NULL || id2 == NULL)
-		return 0;
-	return snd_ctl_elem_id_get_interface(id1) == snd_ctl_elem_id_get_interface(id2) &&
-	       snd_ctl_elem_id_get_index(id1) == snd_ctl_elem_id_get_index(id2) &&
-	       strcmp(snd_ctl_elem_id_get_name(id1), snd_ctl_elem_id_get_name(id2)) == 0 &&
-	       snd_ctl_elem_id_get_device(id1) == snd_ctl_elem_id_get_device(id2) &&
-	       snd_ctl_elem_id_get_subdevice(id1) == snd_ctl_elem_id_get_subdevice(id2);
-}
-
-static int in_list(struct id_list *list, snd_ctl_elem_id_t *id)
-{
-	int i;
-	snd_ctl_elem_id_t *id1;
-
-	for (i = 0; i < list->size; i++) {
-		id1 = list->list[i];
-		if (id1 == NULL)
-			continue;
-		if (compare_ids(id, id1))
-			return 1;
-	}
-	return 0;
-}
-
-static void remove_from_list(struct id_list *list, snd_ctl_elem_id_t *id)
-{
-	int i;
-
-	for (i = 0; i < list->size; i++) {
-		if (compare_ids(id, list->list[i])) {
-			free(list->list[i]);
-			list->list[i] = NULL;
-		}
-	}
-}
-
-static void add_to_list(struct id_list *list, snd_ctl_elem_id_t *id)
-{
-	snd_ctl_elem_id_t *id1;
-	snd_ctl_elem_id_t **n;
-	int i;
-
-	if (snd_ctl_elem_id_malloc(&id1))
-		return;
-	snd_ctl_elem_id_copy(id1, id);
-	for (i = 0; i < list->size; i++) {
-		if (list->list[i] == NULL) {
-			list->list[i] = id1;
-			return;
-		}
-	}
-	n = realloc(list->list, sizeof(void *) * (list->size + 1));
-	if (n == NULL)
-		return;
-	n[list->size] = id1;
-	list->size++;
-	list->list = n;
-}
-
-static int check_lists(struct card *card, snd_ctl_elem_id_t *id)
-{
-	snd_ctl_elem_info_t *info;
-	snd_ctl_elem_info_alloca(&info);
-
-	if (in_list(&card->blacklist, id))
-		return 0;
-	if (in_list(&card->whitelist, id))
-		return 1;
-	snd_ctl_elem_info_set_id(info, id);
-	if (snd_ctl_elem_info(card->handle, info) < 0)
-		return 0;
-	if (snd_ctl_elem_info_is_writable(info) ||
-	    snd_ctl_elem_info_is_tlv_writable(info)) {
-		add_to_list(&card->whitelist, id);
-		return 1;
-	} else {
-		add_to_list(&card->blacklist, id);
-		return 0;
-	}
-}
-
-static int card_events(struct card *card)
-{
-	int res = 0;
-	snd_ctl_event_t *ev;
-	snd_ctl_event_type_t type;
-	unsigned int mask;
-	snd_ctl_elem_id_t *id;
-	snd_ctl_event_alloca(&ev);
-	snd_ctl_elem_id_alloca(&id);
-
-	while (snd_ctl_read(card->handle, ev) == 1) {
-		type = snd_ctl_event_get_type(ev);
-		if (type != SND_CTL_EVENT_ELEM)
-			continue;
-		mask = snd_ctl_event_elem_get_mask(ev);
-		snd_ctl_event_elem_get_id(ev, id);
-		if (mask == SND_CTL_EVENT_MASK_REMOVE) {
-			remove_from_list(&card->whitelist, id);
-			remove_from_list(&card->blacklist, id);
-			continue;
-		}
-		if (mask & SND_CTL_EVENT_MASK_INFO) {
-			remove_from_list(&card->whitelist, id);
-			remove_from_list(&card->blacklist, id);
-		}
-		if (mask & (SND_CTL_EVENT_MASK_VALUE|
-			    SND_CTL_EVENT_MASK_ADD|
-			    SND_CTL_EVENT_MASK_TLV)) {
-			if (check_lists(card, id))
-				res = 1;
-		}
-	}
-	return res;
-}
-
-static long read_pid_file(const char *pidfile)
-{
-	int fd, err;
-	char pid_txt[12];
-
-	fd = open(pidfile, O_RDONLY);
-	if (fd >= 0) {
-		err = read(fd, pid_txt, 11);
-		if (err != 11)
-			err = err < 0 ? -errno : -EIO;
-		close(fd);
-		pid_txt[11] = '\0';
-		return atol(pid_txt);
-	} else {
-		return -errno;
-	}
-}
-
-static int write_pid_file(const char *pidfile)
-{
-	int fd, err;
-	char pid_txt[12];
-
-	sprintf(pid_txt, "%10li\n", (long)getpid());
-	fd = open(pidfile, O_WRONLY|O_CREAT|O_EXCL, 0600);
-	if (fd >= 0) {
-		err = write(fd, pid_txt, 11);
-		if (err != 11) {
-			err = err < 0 ? -errno : -EIO;
-			unlink(pidfile);
-		} else {
-			err = 0;
-		}
-		close(fd);
-	} else {
-		err = -errno;
-	}
-	return err;
-}
-
-int state_daemon_kill(const char *pidfile, const char *cmd)
-{
-	long pid;
-	int sig = SIGHUP;
-
-	if (cmd == NULL) {
-		error("Specify kill command (quit, rescan or save_and_quit)");
-		return -EINVAL;
-	}
-	if (strcmp(cmd, "rescan") == 0)
-		sig = SIGUSR1;
-	else if (strcmp(cmd, "save_and_quit") == 0)
-		sig = SIGUSR2;
-	else if (strcmp(cmd, "quit") == 0)
-		sig = SIGTERM;
-	if (sig == SIGHUP) {
-		error("Unknown kill command '%s'", cmd);
-		return -EINVAL;
-	}
-	pid = read_pid_file(pidfile);
-	if (pid > 0) {
-		if (kill(pid, sig) >= 0)
-			return 0;
-		return -errno;
-	}
-	return 0;
-}
-
-static int check_another_instance(const char *pidfile)
-{
-	long pid;
-
-	pid = read_pid_file(pidfile);
-	if (pid >= 0) {
-		/* invoke new card rescan */
-		if (kill(pid, SIGUSR1) >= 0) {
-			usleep(1000);
-			pid = read_pid_file(pidfile);
-			if (pid >= 0)
-				return 1;
-		}
-	}
-	return 0;
-}
-
-int state_daemon(const char *file, const char *cardname, int period,
-		 const char *pidfile)
-{
-	int count = 0, pcount, psize = 0, i, j, k, changed = 0;
-	time_t last_write, now;
-	unsigned short revents;
-	struct card **cards = NULL;
-	struct pollfd *pfd = NULL, *pfdn;
-
-	if (check_another_instance(pidfile))
-		return 0;
-	rescan = 1;
-	signal(SIGABRT, signal_handler_quit);
-	signal(SIGTERM, signal_handler_quit);
-	signal(SIGINT, signal_handler_quit);
-	signal(SIGUSR1, signal_handler_rescan);
-	signal(SIGUSR2, signal_handler_save_and_quit);
-	write_pid_file(pidfile);
-	time(&last_write);
-	while (!quit || save_now) {
-		if (save_now)
-			goto save;
-		if (rescan) {
-			if (cardname) {
-				add_card(&cards, &count, cardname);
-			} else {
-				add_cards(&cards, &count);
-			}
-			snd_config_update_free_global();
-			rescan = 0;
-		}
-		for (i = pcount = 0; i < count; i++) {
-			if (cards[i] == NULL)
-				continue;
-			pcount += cards[i]->pfds;
-		}
-		if (pcount > psize) {
-			pfdn = realloc(pfd, sizeof(struct pollfd) * pcount);
-			if (pfdn) {
-				psize = pcount;
-				pfd = pfdn;
-			} else {
-				error("No enough memory...");
-				goto out;
-			}
-		}
-		for (i = j = 0; i < count; i++) {
-			if (cards[i] == NULL)
-				continue;
-			k = snd_ctl_poll_descriptors(cards[i]->handle, pfd + j, pcount - j);
-			if (k != cards[i]->pfds) {
-				error("poll prepare failed: %i", k);
-				goto out;
-			}
-			j += k;
-		}
-		i = poll(pfd, j, (period / 2) * 1000);
-		if (i < 0 && errno == EINTR)
-			continue;
-		if (i < 0) {
-			error("poll failed: %s", strerror(errno));
-			break;
-		}
-		time(&now);
-		for (i = j = 0; i < count; i++) {
-			if (cards[i] == NULL)
-				continue;
-			k = snd_ctl_poll_descriptors_revents(cards[i]->handle,
-					pfd + j, cards[i]->pfds, &revents);
-			if (k < 0) {
-				error("poll post failed: %i\n", k);
-				goto out;
-			}
-			j += cards[i]->pfds;
-			if (revents & (POLLERR|POLLNVAL)) {
-				card_free(&cards[i]);
-			} else if (revents & POLLIN) {
-				if (card_events(cards[i])) {
-					/* delay the write */
-					if (!changed)
-						last_write = now;
-					changed = 1;
-				}
-			}
-		}
-		if ((now - last_write >= period && changed) || save_now) {
-save:
-			changed = save_now = 0;
-			save_state(file, cardname);
-		}
-	}
-out:
-	free(pfd);
-	remove(pidfile);
-	for (i = 0; i < count; i++)
-		card_free(&cards[i]);
-	free(cards);
-	return 0;
-}
diff --git a/alsactl/init/Makefile.am b/alsactl/init/Makefile.am
index 64dac41..9e2b83d 100644
--- a/alsactl/init/Makefile.am
+++ b/alsactl/init/Makefile.am
@@ -1,7 +1,7 @@
 
 init_files = \
 	00main default help info test \
-	hda ca0106
+	hda
 EXTRA_DIST = $(init_files)
 alsainitdir = $(datadir)/alsa/init
 alsainit_DATA = $(init_files)
diff --git a/alsactl/init/Makefile.in b/alsactl/init/Makefile.in
deleted file mode 100644
index 7488c2a..0000000
--- a/alsactl/init/Makefile.in
+++ /dev/null
@@ -1,464 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = alsactl/init
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(alsainitdir)"
-DATA = $(alsainit_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-init_files = \
-	00main default help info test \
-	hda ca0106
-
-EXTRA_DIST = $(init_files)
-alsainitdir = $(datadir)/alsa/init
-alsainit_DATA = $(init_files)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsactl/init/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign alsactl/init/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-alsainitDATA: $(alsainit_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(alsainit_DATA)'; test -n "$(alsainitdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(alsainitdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(alsainitdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(alsainitdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(alsainitdir)" || exit $$?; \
-	done
-
-uninstall-alsainitDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(alsainit_DATA)'; test -n "$(alsainitdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(alsainitdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(alsainitdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-alsainitDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-alsainitDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-alsainitDATA install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am uninstall uninstall-alsainitDATA uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsactl/init_parse.c b/alsactl/init_parse.c
index 8a7173b..51b515c 100644
--- a/alsactl/init_parse.c
+++ b/alsactl/init_parse.c
@@ -1278,13 +1278,6 @@
 	return res;
 }
 
-/* return non-zero if the file name has the extension ".conf" */
-static int conf_name_filter(const struct dirent *d)
-{
-	char *ext = strrchr(d->d_name, '.');
-	return ext && !strcmp(ext, ".conf");
-}
-
 static int parse_line(struct space *space, char *line, size_t linesize)
 {
 	char *linepos;
@@ -1487,7 +1480,8 @@
 		if (strcasecmp(key, "INCLUDE") == 0) {
 			char *rootdir, *go_to;
 			const char *filename;
-			struct stat st;
+			struct dirent *dirent;
+			DIR *dir;
 			int linenum;
 			if (op != KEY_OP_ASSIGN) {
 				Perror(space, "invalid INCLUDE operation");
@@ -1504,27 +1498,18 @@
 			go_to = space->go_to;
 			filename = space->filename;
 			linenum = space->linenum;
-			if (stat(string, &st)) {
-				Perror(space, "invalid filename '%s'", string);
-				continue;
-			}
-			if (S_ISDIR(st.st_mode)) {
-				struct dirent **list;
-				int i, num;
-				num = scandir(string, &list, conf_name_filter,
-					      alphasort);
-				if (num < 0) {
-					Perror(space, "invalid directory '%s'", string);
-					continue;
-				}
+			dir = opendir(string);
+			if (dir) {
 				count = strlen(string);
-				for (i = 0; i < num; i++) {
+				while ((dirent = readdir(dir)) != NULL) {
+					if (strcmp(dirent->d_name, ".") == 0 ||
+					    strcmp(dirent->d_name, "..") == 0)
+						continue;
 					string[count] = '\0';
 					strlcat(string, "/", sizeof(string));
-					strlcat(string, list[i]->d_name, sizeof(string));
+					strlcat(string, dirent->d_name, sizeof(string));
 					space->go_to = NULL;
 					space->rootdir = new_root_dir(string);
-					free(list[i]);
 					if (space->rootdir) {
 						err = parse(space, string);
 						free(space->rootdir);
@@ -1537,7 +1522,7 @@
 					if (err)
 						break;
 				}
-				free(list);
+				closedir(dir);
 			} else {
 				space->go_to = NULL;
 				space->rootdir = new_root_dir(string);
diff --git a/alsactl/lock.c b/alsactl/lock.c
deleted file mode 100644
index 587a109..0000000
--- a/alsactl/lock.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  Advanced Linux Sound Architecture Control Program
- *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
- *
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#include "aconfig.h"
-#include "version.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <string.h>
-#include <sys/stat.h>
-#include "alsactl.h"
-
-static int state_lock_(const char *file, int lock, int timeout)
-{
-	int fd = -1, err = 0;
-	struct flock lck;
-	struct stat st;
-	char lcktxt[12];
-	char *nfile;
-
-	if (!do_lock)
-		return 0;
-	nfile = malloc(strlen(file) + 6);
-	if (nfile == NULL) {
-		error("No enough memory...");
-		return -ENOMEM;
-	}
-	strcpy(nfile, file);
-	strcat(nfile, ".lock");
-	lck.l_type = lock ? F_WRLCK : F_UNLCK;
-	lck.l_whence = SEEK_SET;
-	lck.l_start = 0;
-	lck.l_len = 11;
-	lck.l_pid = 0;
-	if (lock) {
-		snprintf(lcktxt, sizeof(lcktxt), "%10li\n", (long)getpid());
-	} else {
-		snprintf(lcktxt, sizeof(lcktxt), "%10s\n", "");
-	}
-	while (fd < 0 && timeout-- > 0) {
-		fd = open(nfile, O_RDWR);
-		if (fd < 0) {
-			fd = open(nfile, O_RDWR|O_CREAT|O_EXCL, 0644);
-			if (fd < 0) {
-				if (errno == EBUSY || errno == EAGAIN) {
-					sleep(1);
-					timeout--;
-				} else {
-					err = -errno;
-					goto out;
-				}
-			}
-		}
-	}
-	if (fd < 0 && timeout <= 0) {
-		err = -EBUSY;
-		goto out;
-	}
-	if (fstat(fd, &st) < 0) {
-		err = -errno;
-		goto out;
-	}
-	if (st.st_size != 11) {
-		if (write(fd, lcktxt, 11) != 11) {
-			err = -EIO;
-			goto out;
-		}
-		if (lseek(fd, 0, SEEK_SET)) {
-			err = -errno;
-			goto out;
-		}
-	}
-	while (timeout > 0) {
-		if (fcntl(fd, F_SETLK, &lck) < 0) {
-			sleep(1);
-			timeout--;
-		} else {
-			break;
-		}
-	}
-	if (timeout <= 0) {
-		err = -EBUSY;
-		goto out;
-	}
-	if (write(fd, lcktxt, 11) != 11) {
-		err = -EIO;
-		goto out;
-	}
-out:
-	free(nfile);
-	return err;
-}
-
-int state_lock(const char *file, int lock, int timeout)
-{
-	int err;
-
-	err = state_lock_(file, lock, timeout);
-	if (err < 0)
-		error("file %s %slock error: %s", file,
-				lock ? "" : "un", strerror(-err));
-	return err;
-}
diff --git a/alsactl/state.c b/alsactl/state.c
index c33f501..a8b5bd3 100644
--- a/alsactl/state.c
+++ b/alsactl/state.c
@@ -31,6 +31,9 @@
 #include "alsactl.h"
 
 
+#define ARRAY_SIZE(a) (sizeof (a) / sizeof (a)[0])
+
+
 static char *id_str(snd_ctl_elem_id_t *id)
 {
 	static char str[128];
@@ -182,11 +185,11 @@
 		char *s = tlv_to_str(tlv);
 		if (s) {
 			err = snd_config_string_add(comment, "tlv", s);
-			free(s);
 			if (err < 0) {
 				error("snd_config_string_add: %s", snd_strerror(err));
 				return err;
 			}
+			free(s);
 		}
 	}
 
@@ -1543,7 +1546,6 @@
 	snd_input_t *in;
 	snd_output_t *out;
 	int stdio;
-	char *nfile = NULL;
 
 	err = snd_config_top(&config);
 	if (err < 0) {
@@ -1551,24 +1553,13 @@
 		return err;
 	}
 	stdio = !strcmp(file, "-");
-	if (!stdio) {
-		nfile = malloc(strlen(file) + 5);
-		if (nfile == NULL) {
-			error("No enough memory...");
-			goto out;
-		}
-		strcpy(nfile, file);
-		strcat(nfile, ".new");
-		if (state_lock(file, 1, 10) != 0)
-			goto out;
-	}
 	if (!stdio && (err = snd_input_stdio_open(&in, file, "r")) >= 0) {
 		err = snd_config_load(config, in);
 		snd_input_close(in);
 #if 0
 		if (err < 0) {
 			error("snd_config_load error: %s", snd_strerror(err));
-			goto out;
+			return err;
 		}
 #endif
 	}
@@ -1584,19 +1575,17 @@
 			if (card < 0) {
 				if (first) {
 					if (ignore_nocards) {
-						err = 0;
-						goto out;
+						return 0;
 					} else {
 						error("No soundcards found...");
-						err = -ENODEV;
-						goto out;
+						return -ENODEV;
 					}
 				}
 				break;
 			}
 			first = 0;
 			if ((err = get_controls(card, config)))
-				goto out;
+				return err;
 		}
 	} else {
 		int cardno;
@@ -1604,40 +1593,26 @@
 		cardno = snd_card_get_index(cardname);
 		if (cardno < 0) {
 			error("Cannot find soundcard '%s'...", cardname);
-			err = cardno;
-			goto out;
+			return cardno;
 		}
 		if ((err = get_controls(cardno, config))) {
-			goto out;
+			return err;
 		}
 	}
 	
-	if (stdio) {
+	if (stdio)
 		err = snd_output_stdio_attach(&out, stdout, 0);
-	} else {
-		err = snd_output_stdio_open(&out, nfile, "w");
-	}
+	else
+		err = snd_output_stdio_open(&out, file, "w");
 	if (err < 0) {
 		error("Cannot open %s for writing: %s", file, snd_strerror(err));
-		err = -errno;
-		goto out;
+		return -errno;
 	}
 	err = snd_config_save(config, out);
 	snd_output_close(out);
-	if (err < 0) {
+	if (err < 0)
 		error("snd_config_save: %s", snd_strerror(err));
-	} else {
-		err = rename(nfile, file);
-		if (err < 0)
-			error("rename failed: %s (%s)", strerror(-err), file);
-	}
-out:
-	if (!stdio)
-		state_lock(file, 0, 10);
-	free(nfile);
-	snd_config_delete(config);
-	snd_config_update_free_global();
-	return err;
+	return 0;
 }
 
 int load_state(const char *file, const char *initfile, const char *cardname,
@@ -1646,7 +1621,7 @@
 	int err, finalerr = 0;
 	snd_config_t *config;
 	snd_input_t *in;
-	int stdio, locked = 0;
+	int stdio;
 
 	err = snd_config_top(&config);
 	if (err < 0) {
@@ -1654,21 +1629,16 @@
 		return err;
 	}
 	stdio = !strcmp(file, "-");
-	if (stdio) {
+	if (stdio)
 		err = snd_input_stdio_attach(&in, stdin, 0);
-	} else {
-		err = state_lock(file, 1, 10);
-		locked = err >= 0;
-		err = err >= 0 ? snd_input_stdio_open(&in, file, "r") : err;
-	}
+	else
+		err = snd_input_stdio_open(&in, file, "r");
 	if (err >= 0) {
 		err = snd_config_load(config, in);
 		snd_input_close(in);
-		if (locked)
-			state_lock(file, 0, 10);
 		if (err < 0) {
 			error("snd_config_load error: %s", snd_strerror(err));
-			goto out;
+			return err;
 		}
 	} else {
 		int card, first = 1;
@@ -1676,24 +1646,13 @@
 
 		error("Cannot open %s for reading: %s", file, snd_strerror(err));
 		finalerr = err;
-		if (cardname) {
-			card = snd_card_get_index(cardname);
-			if (card < 0) {
-				error("Cannot find soundcard '%s'...", cardname);
-				err = -ENODEV;
-				goto out;
-			}
-			goto single;
-		} else {
-			card = -1;
-		}
+		card = -1;
 		/* find each installed soundcards */
-		while (!cardname) {
+		while (1) {
 			if (snd_card_next(&card) < 0)
 				break;
 			if (card < 0)
 				break;
-single:
 			first = 0;
 			if (!do_init)
 				break;
@@ -1707,8 +1666,7 @@
 		}
 		if (first)
 			finalerr = 0;	/* no cards, no error code */
-		err = finalerr;
-		goto out;
+		return finalerr;
 	}
 
 	if (!cardname) {
@@ -1723,12 +1681,10 @@
 			if (card < 0) {
 				if (first) {
 					if (ignore_nocards) {
-						err = 0;
-						goto out;
+						return 0;
 					} else {
 						error("No soundcards found...");
-						err = -ENODEV;
-						goto out;
+						return -ENODEV;
 					}
 				}
 				break;
@@ -1755,8 +1711,7 @@
 		cardno = snd_card_get_index(cardname);
 		if (cardno < 0) {
 			error("Cannot find soundcard '%s'...", cardname);
-			err = -ENODEV;
-			goto out;
+			return -ENODEV;
 		}
 		/* do a check if controls matches state file */
 		if (do_init && set_controls(cardno, config, 0)) {
@@ -1769,12 +1724,8 @@
 		if ((err = set_controls(cardno, config, 1))) {
 			initfailed(cardno, "restore", err);
 			if (!force_restore)
-				goto out;
+				return err;
 		}
 	}
-	err = finalerr;
-out:
-	snd_config_delete(config);
-	snd_config_update_free_global();
-	return err;
+	return finalerr;
 }
diff --git a/alsactl/utils.c b/alsactl/utils.c
index 072c239..a27eb6e 100644
--- a/alsactl/utils.c
+++ b/alsactl/utils.c
@@ -27,7 +27,6 @@
 #include <errno.h>
 #include <ctype.h>
 #include <dirent.h>
-#include <syslog.h>
 #include <sys/stat.h>
 #include <sys/mman.h>
 
@@ -101,79 +100,3 @@
 	close(fp);
 	free(str);
 }
-
-static void syslog_(int prio, const char *fcn, long line,
-		    const char *fmt, va_list ap)
-{
-	char buf[1024];
-
-	snprintf(buf, sizeof(buf), "%s: %s:%ld", command, fcn, line);
-	buf[sizeof(buf)-1] = '\0';
-	vsnprintf(buf + strlen(buf), sizeof(buf)-strlen(buf), fmt, ap);
-	buf[sizeof(buf)-1] = '\0';
-	syslog(LOG_INFO, "%s", buf);
-}
-
-void info_(const char *fcn, long line, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	if (use_syslog) {
-		syslog_(LOG_INFO, fcn, line, fmt, ap);
-	} else {
-		fprintf(stdout, "%s: %s:%ld: ", command, fcn, line);
-		vfprintf(stdout, fmt, ap);
-		putc('\n', stdout);
-	}
-	va_end(ap);
-}
-
-void error_(const char *fcn, long line, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	if (use_syslog) {
-		syslog_(LOG_ERR, fcn, line, fmt, ap);
-	} else {
-		fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
-		vfprintf(stderr, fmt, ap);
-		putc('\n', stderr);
-	}
-	va_end(ap);
-}
-
-void cerror_(const char *fcn, long line, int cond, const char *fmt, ...)
-{
-	va_list ap;
-
-	if (!cond && !debugflag)
-		return;
-	if (use_syslog) {
-		syslog_(LOG_ERR, fcn, line, fmt, ap);
-	} else {
-		va_start(ap, fmt);
-		fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
-		vfprintf(stderr, fmt, ap);
-		putc('\n', stderr);
-		va_end(ap);
-	}
-}
-
-void dbg_(const char *fcn, long line, const char *fmt, ...)
-{
-	va_list ap;
-
-	if (!debugflag)
-		return;
-	if (use_syslog) {
-		syslog_(LOG_DEBUG, fcn, line, fmt, ap);
-	} else {
-		va_start(ap, fmt);
-		fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
-		vfprintf(stderr, fmt, ap);
-		putc('\n', stderr);
-		va_end(ap);
-	}
-}
diff --git a/alsaloop/Android.mk b/alsaloop/Android.mk
deleted file mode 100644
index c42964c..0000000
--- a/alsaloop/Android.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := alsaloop
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := alsaloop.c \
-                   control.c \
-                   pcmjob.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/alsaloop/Makefile.in b/alsaloop/Makefile.in
deleted file mode 100644
index 7d8b83b..0000000
--- a/alsaloop/Makefile.in
+++ /dev/null
@@ -1,657 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@HAVE_SAMPLERATE_TRUE@am__append_1 = -lsamplerate
-bin_PROGRAMS = alsaloop$(EXEEXT)
-subdir = alsaloop
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_alsaloop_OBJECTS = alsaloop.$(OBJEXT) pcmjob.$(OBJEXT) \
-	control.$(OBJEXT)
-alsaloop_OBJECTS = $(am_alsaloop_OBJECTS)
-alsaloop_LDADD = $(LDADD)
-am__DEPENDENCIES_1 =
-alsaloop_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsaloop_SOURCES)
-DIST_SOURCES = $(alsaloop_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-LDADD = -lm $(am__append_1)
-AM_CFLAGS = -D_GNU_SOURCE
-alsaloop_SOURCES = alsaloop.c pcmjob.c control.c
-noinst_HEADERS = alsaloop.h
-man_MANS = alsaloop.1
-EXTRA_DIST = alsaloop.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaloop/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign alsaloop/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-alsaloop$(EXEEXT): $(alsaloop_OBJECTS) $(alsaloop_DEPENDENCIES) $(EXTRA_alsaloop_DEPENDENCIES) 
-	@rm -f alsaloop$(EXEEXT)
-	$(LINK) $(alsaloop_OBJECTS) $(alsaloop_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsaloop.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/control.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcmjob.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man1dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.1[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic cscopelist ctags distclean distclean-compile \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-man1 \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsaloop/NOTICE b/alsaloop/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/alsaloop/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/alsaloop/alsaloop.1 b/alsaloop/alsaloop.1
index 33fa4d1..048d1e0 100644
--- a/alsaloop/alsaloop.1
+++ b/alsaloop/alsaloop.1
@@ -1,6 +1,6 @@
 .TH ALSALOOP 1 "5 Aug 2010"
 .SH NAME
-alsaloop \- command\-line PCM loopback
+alsaloop \- command-line PCM loopback
 .SH SYNOPSIS
 \fBalsaloop\fP [\fI\-option\fP] [\fIcmd\fP]
 .SH DESCRIPTION
@@ -27,10 +27,10 @@
 contains the command line options for one job. The '#' means comment and
 rest of line is ignored. Example:
 
-  # First line \- comment, second line \- first job
-  \-C hw:1,0 \-P hw:0,0 \-t 50000 \-T 1
-  # Third line \- comment, fourth line \- second job
-  \-C hw:1,1 \-P hw:0,1 \-t 40000 \-T 2
+  # First line - comment, second line - first job
+  -C hw:1,0 -P hw:0,0 -t 50000 -T 1
+  # Third line - comment, fourth line - second job
+  -C hw:1,1 -P hw:0,1 -t 40000 -T 2
 
 .TP
 \fI\-d\fP | \fI\-\-daemonize\fP
@@ -70,7 +70,7 @@
 .TP
 \fI\-f <format>\fP | \fI\-\-format=<format>\fP
 
-Format specification (usually S16_LE S32_LE). Use \-h to list all formats.
+Format specification (usually S16_LE S32_LE). Use -h to list all formats.
 Default format is S16_LE.
 
 .TP
@@ -86,19 +86,19 @@
 .TP
 \fI\-n\fP | \fI\-\-resample\fP
 
-Allow rate resampling using alsa\-lib.
+Allow rate resampling using alsa-lib.
 
 .TP
 \fI\-A <converter>\fP | \fI\-\-samplerate=<converter>\fP
 
 Use libsamplerate and choose a converter:
 
-  0 or sincbest     \- best quality
-  1 or sincmedium   \- medium quality
-  2 or sincfastest  \- lowest quality
-  3 or zerohold     \- hold zero samples
-  4 or linear       \- worst quality - linear resampling
-  5 or auto         \- choose best method
+  0 or sincbest     - best quality
+  1 or sincmedium   - medium quality
+  2 or sincfastest  - lowest quality
+  3 or zerohold     - hold zero samples
+  4 or linear       - worst quality - linear resampling
+  5 or auto         - choose best method
 
 .TP
 \fI\-B <size>\fP | \fI\-\-buffer=<size>\fP
@@ -118,30 +118,30 @@
 .TP
 \fI\-b\fP | \fI\-\-nblock\fP
 
-Non\-block mode (very early process wakeup). Eats more CPU.
+Non-block mode (very early process wakeup). Eats more CPU.
 
 .TP
 \fI\-S <mode>\fP | \fI\-\-sync=<mode>\fP
 
 Sync mode specification for capture to playback stream:
-  0 or none       \- do not touch the stream
-  1 or simple     \- add or remove samples to keep
+  0 or none       - do not touch the stream
+  1 or simple     - add or remove samples to keep
                     both streams synchronized
-  2 or captshift  \- use driver for the capture device
+  2 or captshift  - use driver for the capture device
                     (if supported) to compensate
                     the rate shift
-  3 or playshift  \- use driver for the playback device
+  3 or playshift  - use driver for the playback device
                     (if supported) to compensate
                     the rate shift
-  4 or samplerate \- use samplerate library to do rate resampling
-  5 or auto       \- automatically selects the best method
+  4 or samplerate - use samplerate library to do rate resampling
+  5 or auto       - automatically selects the best method
                     in this order: captshift, playshift,
                     samplerate, simple
 
 .TP
 \fI\-T <num>\fP | \fI\-\-thread=<num>\fP
 
-Thread number (\-1 means create a unique thread). All jobs with same
+Thread number (-1 means create a unique thread). All jobs with same
 thread numbers are run within one thread.
 
 .TP
@@ -155,12 +155,12 @@
 
 Known attributes:
 
-  name      \- control ID name
-  index     \- control ID index
-  device    \- control ID device
-  subdevice \- control ID subdevice
-  iface     \- control ID interface
-  numid     \- control ID numid
+  name      - control ID name
+  index     - control ID index
+  device    - control ID device
+  subdevice - control ID subdevice
+  iface     - control ID interface
+  numid     - control ID numid
 
 .TP
 \fI\-O <ossmixid>\fP | \fI\-\-ossmixer=<midid>\fP
diff --git a/alsaloop/alsaloop.c b/alsaloop/alsaloop.c
index e1a36d2..8710dd1 100644
--- a/alsaloop/alsaloop.c
+++ b/alsaloop/alsaloop.c
@@ -387,9 +387,7 @@
 	int arg_nblock = 0;
 	int arg_effect = 0;
 	int arg_resample = 0;
-#ifdef USE_SAMPLERATE
 	int arg_samplerate = SRC_SINC_FASTEST + 1;
-#endif
 	int arg_sync = SYNC_TYPE_AUTO;
 	int arg_slave = SLAVE_TYPE_AUTO;
 	int arg_thread = 0;
@@ -476,7 +474,6 @@
 		case 'n':
 			arg_resample = 1;
 			break;
-#ifdef USE_SAMPLERATE
 		case 'A':
 			if (strcasecmp(optarg, "sincbest") == 0)
 				arg_samplerate = SRC_SINC_BEST_QUALITY;
@@ -494,7 +491,6 @@
 				arg_sync = SRC_SINC_FASTEST;
 			arg_samplerate += 1;
 			break;
-#endif
 		case 'S':
 			if (strcasecmp(optarg, "samplerate") == 0)
 				arg_sync = SYNC_TYPE_SAMPLERATE;
@@ -614,6 +610,11 @@
 		loop->src_enable = arg_samplerate > 0;
 		if (loop->src_enable)
 			loop->src_converter_type = arg_samplerate - 1;
+#else
+		if (arg_samplerate > 0) {
+			logit(LOG_CRIT, "No libsamplerate support.\n");
+			exit(EXIT_FAILURE);
+		}
 #endif
 		set_loop_time(loop, arg_loop_time);
 		add_loop(loop);
diff --git a/alsaloop/effect-sweep.c b/alsaloop/effect-sweep.c
new file mode 100644
index 0000000..4a0903d
--- /dev/null
+++ b/alsaloop/effect-sweep.c
@@ -0,0 +1,128 @@
+/*
+ *  Bandpass filter sweep effect
+ *  Copyright (c) Maarten de Boer <mdeboer@iua.upf.es>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <math.h>
+#include <alsa/asoundlib.h>
+
+struct effect_private {
+	/* filter the sweep variables */
+	float lfo,dlfo,fs,fc,BW,C,D,a0,a1,a2,b1,b2,*x[3],*y[3];
+	float lfo_depth, lfo_center;
+	unsigned int channels;
+};
+
+static int effect_init(struct lookback *loopback,
+		       void *private_data,
+		       snd_pcm_access_t access,
+		       unsigned int channels,
+		       unsigned int rate,
+		       snd_pcm_format_t format)
+{
+	struct effect_private *priv = private_data;
+	int i;
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+	if (format != SND_PCM_FORMAT_S16_LE)
+		return -EIO;
+#elif __BYTE_ORDER == __BIG_ENDIAN
+	if (format != SND_PCM_FORMAT_S16_BE)
+		return -EIO;
+#else
+	return -EIO;
+#endif
+	priv->fs = (float) rate;
+	priv->channels = channels;
+	for (i = 0; i < 3; i++) {
+		priv->x[i] = calloc(channels * sizeof(float));
+		priv->y[i] = calloc(channels * sizeof(float));
+	}
+	return 0;
+}
+
+static int effect_done(struct loopback *loopback,
+		       void *private_data)
+{
+	struct effect_private *priv = private_data;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		free(priv->x[i]);
+		free(priv->y[i]);
+	}
+	return 0;
+}
+
+static int effect_apply(struct loopback *loopback,
+			void *private_data,
+			const snd_pcm_channel_area_t *areas,
+			snd_uframes_t offset,
+			snd_uframes_t frames)
+{
+	struct effect_private *priv = private_data;
+	short *samples = (short*)areas[0].addr + offset*priv->channels;
+	snd_uframes_t i;
+
+	for (i=0; i < frames; i++) {
+		int chn;
+
+		fc = sin(priv->lfo)*priv->lfo_depth+priv->lfo_center;
+		priv->lfo += priv->dlfo;
+		if (priv->lfo>2.*M_PI) priv->lfo -= 2.*M_PI;
+		priv->C = 1./tan(M_PI*priv->BW/priv->fs);
+		priv->D = 2.*cos(2*M_PI*fc/fs);
+		priv->a0 = 1./(1.+priv->C);
+		priv->a1 = 0;
+		priv->a2 = -priv->a0;
+		priv->b1 = -priv->C*priv->D*a0;
+		priv->b2 = (priv->C-1)*priv->a0;
+
+		for (chn=0; chn < priv->channels; chn++)
+		{
+			priv->x[chn][2] = priv->x[chn][1];
+			priv->x[chn][1] = priv->x[chn][0];
+
+			priv->y[chn][2] = priv->y[chn][1];
+			priv->y[chn][1] = priv->y[chn][0];
+
+			priv->x[chn][0] = samples[i*channels+chn];
+			priv->y[chn][0] = priv->a0*priv->x[0][chn]
+				+ priv->a1*priv->x[1][chn] + priv->a2*x[2][chn]
+				- priv->b1*priv->y[1][chn] - priv->b2*y[2][chn];
+			samples[i*channels+chn] = priv->y[chn][0];
+		}
+	}
+	return 0;
+}
+
+void effect_init_sweep(void)
+{
+	struct effect_private *priv;
+
+	priv = register_effect(effect_init,
+			       effect_apply,
+			       effect_done,
+			       sizeof(struct effectprivate));
+	if (priv) {
+		priv->lfo_center = 2000.;
+		priv->lfo_depth = 1800.;
+		priv->lfo_freq = 0.2;
+		priv->BW = 50;
+	}
+}
diff --git a/alsaloop/pcmjob.c b/alsaloop/pcmjob.c
index 139b6fd..bfac2d3 100644
--- a/alsaloop/pcmjob.c
+++ b/alsaloop/pcmjob.c
@@ -246,11 +246,15 @@
 	} else {
 		if (lhandle == lhandle->loopback->play) {
 			val = bufsize + bufsize / 2;
+			if (val < (period_size * 3) / 4)
+				val = (period_size * 3) / 4;
 			if (val > (buffer_size * 3) / 4)
 				val = (buffer_size * 3) / 4;
 			val = buffer_size - val;
 		} else {
 			val = bufsize / 2;
+			if (val < period_size / 2)
+				val = period_size / 2;
 			if (val > buffer_size / 4)
 				val = buffer_size / 4;
 		}
@@ -945,23 +949,6 @@
 			logit(LOG_CRIT, "%s start failed: %s\n", play->id, snd_strerror(err));
 			return err;
 		}
-	} else if (delay1 < fill) {
-		diff = (fill - delay1) / play->pitch;
-		while (diff > 0) {
-			delay1 = play->buf_size - play->buf_pos;
-			if (verbose > 6)
-				snd_output_printf(loop->output,
-					"sync: playback short, silence filling %li / buf_count=%li\n", (long)delay1, play->buf_count);
-			if (delay1 > diff)
-				delay1 = diff;
-			if ((err = snd_pcm_format_set_silence(play->format, play->buf + play->buf_pos * play->channels, delay1)) < 0)
-				return err;
-			play->buf_pos += delay1;
-			play->buf_pos %= play->buf_size;
-			play->buf_count += delay1;
-			diff -= delay1;
-		}
-		writeit(play);
 	}
 	if (verbose > 5) {
 		snd_output_printf(loop->output, "%s: xrun sync ok\n", loop->id);
diff --git a/alsaloop/test.sh b/alsaloop/test.sh
new file mode 100755
index 0000000..fac72b9
--- /dev/null
+++ b/alsaloop/test.sh
@@ -0,0 +1,94 @@
+#!/bin/bash
+
+#DBG="gdb --args "
+#DBG="strace"
+#DBG="valgrind --leak-check=full"
+ARGS=
+CFGFILE="/tmp/alsaloop.test.cfg"
+
+test1() {
+  echo "TEST1"
+  $DBG ./alsaloop -C hw:1,0 -P plughw:0,0 \
+    --tlatency 50000 \
+    --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+    --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+    --mixer "name='PCM Playback Volume'" \
+    --ossmixer "Master@VOLUME" \
+    --ossmixer "PCM@PCM" \
+    $ARGS
+}
+
+test2() {
+  echo "TEST2"
+cat > $CFGFILE <<EOF
+# first job
+-C hw:1,0,0 -P hw:0,0,0 --tlatency 50000 --thread 1 \
+    --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+    --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+    --mixer "name='PCM Playback Volume'"
+# next line - second job
+-C hw:1,0,1 -P hw:0,1,0 --tlatency 50000 --thread 2
+EOF
+  $DBG ./alsaloop -d --config $CFGFILE $ARGS
+}
+
+test3() {
+  echo "TEST3"
+  LATENCY=180000
+cat > $CFGFILE <<EOF
+-C hw:1,0,0 -P plug:dmix:0 --tlatency $LATENCY --thread 0 \
+    --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+    --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+    --mixer "name='PCM Playback Volume'" \
+    --ossmixer "name=Master@VOLUME"
+-C hw:1,0,1 -P plug:dmix:0 --tlatency $LATENCY --thread 1
+-C hw:1,0,2 -P plug:dmix:0 --tlatency $LATENCY --thread 2
+-C hw:1,0,3 -P plug:dmix:0 --tlatency $LATENCY --thread 3
+-C hw:1,0,4 -P plug:dmix:0 --tlatency $LATENCY --thread 4
+-C hw:1,0,5 -P plug:dmix:0 --tlatency $LATENCY --thread 5
+-C hw:1,0,6 -P plug:dmix:0 --tlatency $LATENCY --thread 6
+-C hw:1,0,7 -P plug:dmix:0 --tlatency $LATENCY --thread 7
+EOF
+  $DBG ./alsaloop --config $CFGFILE $ARGS
+}
+
+test4() {
+  echo "TEST4"
+  $DBG ./alsaloop -C hw:1,0 -P plughw:0,0 -a off -r 11025 \
+    --tlatency 50000 \
+    --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+    --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+    --mixer "name='PCM Playback Volume'" \
+    $ARGS
+}
+
+test5() {
+  echo "TEST5"
+cat > $CFGFILE <<EOF
+-C hw:1,0,0 -P plughw:0,0 --tlatency 50000 --thread 1 \
+    --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+    --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+    --mixer "name='PCM Playback Volume'" \
+    --ossmixer "name=Master@VOLUME"
+-C hw:1,0,1 -P plughw:0,1 --tlatency 50000 --thread 2
+EOF
+  $DBG ./alsaloop --config $CFGFILE $ARGS
+}
+
+sigusr1() {
+	pid=$(ps ax | grep alsaloop | grep -v grep | colrm 7 255)
+	if test -n "$pid"; then
+		echo "Killing alsaloop $pid..."
+		kill -SIGUSR1 $pid
+	fi
+}
+
+case "$1" in
+test1) shift; ARGS="$@"; test1 ;;
+test2) shift; ARGS="$@"; test2 ;;
+test3) shift; ARGS="$@"; test3 ;;
+test4) shift; ARGS="$@"; test4 ;;
+test5) shift; ARGS="$@"; test5 ;;
+usr|sig*) sigusr1 ;;
+*) ARGS="$@"; test1 ;;
+esac
diff --git a/alsamixer/Makefile.in b/alsamixer/Makefile.in
deleted file mode 100644
index 185544d..0000000
--- a/alsamixer/Makefile.in
+++ /dev/null
@@ -1,686 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = alsamixer$(EXEEXT)
-subdir = alsamixer
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_alsamixer_OBJECTS = card_select.$(OBJEXT) cli.$(OBJEXT) \
-	colors.$(OBJEXT) device_name.$(OBJEXT) die.$(OBJEXT) \
-	mainloop.$(OBJEXT) mem.$(OBJEXT) mixer_controls.$(OBJEXT) \
-	mixer_display.$(OBJEXT) mixer_widget.$(OBJEXT) \
-	proc_files.$(OBJEXT) textbox.$(OBJEXT) utils.$(OBJEXT) \
-	volume_mapping.$(OBJEXT) widget.$(OBJEXT)
-alsamixer_OBJECTS = $(am_alsamixer_OBJECTS)
-alsamixer_LDADD = $(LDADD)
-alsamixer_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsamixer_SOURCES)
-DIST_SOURCES = $(alsamixer_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-AM_CFLAGS = @CURSES_CFLAGS@ -DCURSESINC="@CURSESINC@"
-LDADD = @CURSESLIB@
-alsamixer_SOURCES = card_select.c card_select.h \
-		cli.c \
-		colors.c colors.h \
-		device_name.c device_name.h \
-		die.c die.h \
-		mainloop.c mainloop.h \
-		mem.c mem.h \
-		mixer_controls.c mixer_controls.h \
-		mixer_display.c mixer_display.h \
-		mixer_widget.c mixer_widget.h \
-		proc_files.c proc_files.h \
-		textbox.c textbox.h \
-		utils.c utils.h \
-		volume_mapping.c volume_mapping.h \
-		widget.c widget.h
-
-man_MANS = alsamixer.1
-EXTRA_DIST = alsamixer.1
-alsamixer_INCLUDES = -I$(top_srcdir)/include
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsamixer/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign alsamixer/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-alsamixer$(EXEEXT): $(alsamixer_OBJECTS) $(alsamixer_DEPENDENCIES) $(EXTRA_alsamixer_DEPENDENCIES) 
-	@rm -f alsamixer$(EXEEXT)
-	$(LINK) $(alsamixer_OBJECTS) $(alsamixer_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/card_select.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cli.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/colors.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/device_name.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/die.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mainloop.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mem.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_controls.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_display.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_widget.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proc_files.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/textbox.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/volume_mapping.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/widget.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man1dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.1[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic cscopelist ctags distclean distclean-compile \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-man1 \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-man uninstall-man1
-
-
-#LDFLAGS = -static
-#CFLAGS += -g -Wall
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsamixer/alsamixer.1 b/alsamixer/alsamixer.1
index 8d34680..cd88404 100644
--- a/alsamixer/alsamixer.1
+++ b/alsamixer/alsamixer.1
@@ -157,19 +157,6 @@
 Please note that you might need to hit \fIESC\fP twice on some terminals
 since it's regarded as a prefix key.
 
-.SH VOLUME MAPPING
-In \fBalsamixer\fP, the volume is mapped to a value that is more natural
-for a human ear.  The mapping is designed so that the position in the
-interval is proportional to the volume as a human ear would perceive
-it, i.e. the position is the cubic root of the linear sample
-multiplication factor.  For controls with a small range (24 dB or
-less), the mapping is linear in the dB values so that each step has
-the same size visually.
-
-Only for controls without dB information, a linear mapping of the
-hardware volume register values is used (this is the same algorithm as
-used in the old \fBalsamixer\fP).
-
 .SH SEE ALSO
 \fB
 amixer(1),
diff --git a/alsamixer/cli.c b/alsamixer/cli.c
index 3f8f52f..bb4f030 100644
--- a/alsamixer/cli.c
+++ b/alsamixer/cli.c
@@ -115,9 +115,6 @@
 
 int main(int argc, char *argv[])
 {
-	if (!isatty(fileno(stdin)))
-		return 0;
-
 	setlocale(LC_ALL, "");
 #ifdef ENABLE_NLS_IN_CURSES
 	textdomain(PACKAGE);
diff --git a/alsamixer/go b/alsamixer/go
new file mode 100755
index 0000000..c33c298
--- /dev/null
+++ b/alsamixer/go
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+#GDB="gdb --args"
+GDB=""
+
+ALSA_MIXER_SIMPLE_MODULES="$HOME/hg/alsa-lib/modules/mixer/simple/.libs" \
+ALSA_MIXER_SIMPLE="$HOME/hg/alsa-lib/src/conf/smixer.conf" \
+ALSA_MIXER_SIMPLE_MPYTHON="$HOME/hg/alsa-lib/modules/mixer/simple/python/main.py" \
+LD_PRELOAD="$HOME/hg/alsa-lib/src/.libs/libasound.so" \
+$GDB ./alsamixer "$@"
diff --git a/alsamixer/mainloop.c b/alsamixer/mainloop.c
index 351f57f..dbfef9b 100644
--- a/alsamixer/mainloop.c
+++ b/alsamixer/mainloop.c
@@ -128,15 +128,8 @@
 		}
 		if (!active_widget)
 			break;
-		if (controls_changed) {
-			controls_changed = FALSE;
-			create_controls();
-			control_values_changed = FALSE;
+		if (controls_changed)
 			display_controls();
-		} else if (control_values_changed) {
-			control_values_changed = FALSE;
-			display_controls();
-		}
 	}
 	free(pollfds);
 }
diff --git a/alsamixer/mixer_display.c b/alsamixer/mixer_display.c
index b1f79d0..8ba396a 100644
--- a/alsamixer/mixer_display.c
+++ b/alsamixer/mixer_display.c
@@ -657,6 +657,7 @@
 		display_no_controls();
 	}
 	display_scroll_indicators();
+	controls_changed = FALSE;
 }
 
 void compute_controls_layout(void)
diff --git a/alsamixer/mixer_widget.c b/alsamixer/mixer_widget.c
index 0c2b9e0..caaf777 100644
--- a/alsamixer/mixer_widget.c
+++ b/alsamixer/mixer_widget.c
@@ -50,7 +50,6 @@
 snd_mixer_selem_id_t *current_selem_id;
 unsigned int current_control_flags;
 
-bool control_values_changed;
 bool controls_changed;
 
 enum channel_mask {
@@ -60,15 +59,20 @@
 
 static int elem_callback(snd_mixer_elem_t *elem, unsigned int mask)
 {
-	if (mask == SND_CTL_EVENT_MASK_REMOVE) {
-		controls_changed = TRUE;
-	} else {
-		if (mask & SND_CTL_EVENT_MASK_VALUE)
-			control_values_changed = TRUE;
+	unsigned int i;
 
-		if (mask & SND_CTL_EVENT_MASK_INFO)
-			controls_changed = TRUE;
-	}
+	if (mask & (SND_CTL_EVENT_MASK_REMOVE |
+		    SND_CTL_EVENT_MASK_INFO |
+		    SND_CTL_EVENT_MASK_VALUE))
+		controls_changed = TRUE;
+
+	if (mask & SND_CTL_EVENT_MASK_INFO)
+		for (i = 0; i < controls_count; ++i)
+			if (controls[i].elem == elem) {
+				controls[i].flags &= ~IS_ACTIVE;
+				if (snd_mixer_selem_is_active(controls[i].elem))
+					controls[i].flags |= IS_ACTIVE;
+			}
 
 	return 0;
 }
diff --git a/alsamixer/mixer_widget.h b/alsamixer/mixer_widget.h
index 086611c..da8628e 100644
--- a/alsamixer/mixer_widget.h
+++ b/alsamixer/mixer_widget.h
@@ -24,7 +24,6 @@
 extern snd_mixer_selem_id_t *current_selem_id;
 extern unsigned int current_control_flags;
 
-extern bool control_values_changed;
 extern bool controls_changed;
 
 void create_mixer_object(struct snd_mixer_selem_regopt *selem_regopt);
diff --git a/alsaucm/Android.mk b/alsaucm/Android.mk
deleted file mode 100644
index 5ff1220..0000000
--- a/alsaucm/Android.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := alsaucm
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := usecase.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/alsaucm/Makefile.in b/alsaucm/Makefile.in
deleted file mode 100644
index c4e512d..0000000
--- a/alsaucm/Makefile.in
+++ /dev/null
@@ -1,559 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = alsaucm$(EXEEXT)
-subdir = alsaucm
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_alsaucm_OBJECTS = usecase.$(OBJEXT)
-alsaucm_OBJECTS = $(am_alsaucm_OBJECTS)
-alsaucm_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsaucm_SOURCES)
-DIST_SOURCES = $(alsaucm_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-alsaucm_SOURCES = usecase.c
-
-# local build
-INCLUDES = -Wall -I$(top_srcdir)/include \
-	-I$(top_srcdir)/../alsa-lib/include
-alsaucm_LDADD = -lasound -L$(top_srcdir)/../alsa-lib/src/.libs
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaucm/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign alsaucm/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-alsaucm$(EXEEXT): $(alsaucm_OBJECTS) $(alsaucm_DEPENDENCIES) $(EXTRA_alsaucm_DEPENDENCIES) 
-	@rm -f alsaucm$(EXEEXT)
-	$(LINK) $(alsaucm_OBJECTS) $(alsaucm_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usecase.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic cscopelist ctags distclean distclean-compile \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
-	uninstall-am uninstall-binPROGRAMS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsaucm/NOTICE b/alsaucm/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/alsaucm/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/alsaucm/go.sh b/alsaucm/go.sh
new file mode 100755
index 0000000..2aadd1c
--- /dev/null
+++ b/alsaucm/go.sh
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+#GDB="gdb --args"
+
+ALSA_CONFIG_UCM="$HOME/alsa/alsa-lib/test/ucm" \
+LD_PRELOAD="$HOME/alsa/alsa-lib/src/.libs/libasound.so" \
+$GDB ./alsaucm "$@"
diff --git a/amidi/Android.mk b/amidi/Android.mk
deleted file mode 100644
index b73c9b7..0000000
--- a/amidi/Android.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := amidi
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := amidi.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/amidi/Makefile.in b/amidi/Makefile.in
deleted file mode 100644
index 92b3549..0000000
--- a/amidi/Makefile.in
+++ /dev/null
@@ -1,645 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = amidi$(EXEEXT)
-subdir = amidi
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-amidi_SOURCES = amidi.c
-amidi_OBJECTS = amidi.$(OBJEXT)
-amidi_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = amidi.c
-DIST_SOURCES = amidi.c
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-EXTRA_DIST = amidi.1
-man_MANS = amidi.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amidi/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign amidi/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-amidi$(EXEEXT): $(amidi_OBJECTS) $(amidi_DEPENDENCIES) $(EXTRA_amidi_DEPENDENCIES) 
-	@rm -f amidi$(EXEEXT)
-	$(LINK) $(amidi_OBJECTS) $(amidi_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amidi.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man1dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.1[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic cscopelist ctags distclean distclean-compile \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-man1 \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/amidi/NOTICE b/amidi/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/amidi/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/amidi/amidi.1 b/amidi/amidi.1
index 1b4cfb1..c58d65c 100644
--- a/amidi/amidi.1
+++ b/amidi/amidi.1
@@ -9,7 +9,7 @@
 
 .SH DESCRIPTION
 .B amidi
-is a command-line utility which allows one to receive and send
+is a command-line utility which allows to receive and send
 SysEx (system exclusive) data from/to external MIDI devices.
 It can also send any other MIDI commands.
 
@@ -141,7 +141,7 @@
 default rawmidi definitions
 .br
 .I /etc/asound.conf
-system\-wide rawmidi definitions
+system-wide rawmidi definitions
 .br
 .I ~/.asoundrc
 user specific rawmidi definitions
diff --git a/amixer/Android.mk b/amixer/Android.mk
deleted file mode 100644
index ec69411..0000000
--- a/amixer/Android.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := amixer
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := amixer.c \
-                   ../alsamixer/volume_mapping.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/amixer/Makefile.am b/amixer/Makefile.am
index ba67a57..fcd0e81 100644
--- a/amixer/Makefile.am
+++ b/amixer/Makefile.am
@@ -4,7 +4,7 @@
 # CFLAGS += -g -Wall
 
 bin_PROGRAMS = amixer
-amixer_SOURCES = amixer.c ../alsamixer/volume_mapping.c
+amixer_SOURCES = amixer.c
 noinst_HEADERS = amixer.h
 man_MANS = amixer.1
 EXTRA_DIST = amixer.1
diff --git a/amixer/Makefile.in b/amixer/Makefile.in
deleted file mode 100644
index b0cde8a..0000000
--- a/amixer/Makefile.in
+++ /dev/null
@@ -1,666 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = amixer$(EXEEXT)
-subdir = amixer
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
-	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_amixer_OBJECTS = amixer.$(OBJEXT) volume_mapping.$(OBJEXT)
-amixer_OBJECTS = $(am_amixer_OBJECTS)
-amixer_LDADD = $(LDADD)
-amixer_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(amixer_SOURCES)
-DIST_SOURCES = $(amixer_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-LDADD = -lm
-amixer_SOURCES = amixer.c ../alsamixer/volume_mapping.c
-noinst_HEADERS = amixer.h
-man_MANS = amixer.1
-EXTRA_DIST = amixer.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amixer/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign amixer/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-amixer$(EXEEXT): $(amixer_OBJECTS) $(amixer_DEPENDENCIES) $(EXTRA_amixer_DEPENDENCIES) 
-	@rm -f amixer$(EXEEXT)
-	$(LINK) $(amixer_OBJECTS) $(amixer_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amixer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/volume_mapping.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-volume_mapping.o: ../alsamixer/volume_mapping.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT volume_mapping.o -MD -MP -MF $(DEPDIR)/volume_mapping.Tpo -c -o volume_mapping.o `test -f '../alsamixer/volume_mapping.c' || echo '$(srcdir)/'`../alsamixer/volume_mapping.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/volume_mapping.Tpo $(DEPDIR)/volume_mapping.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='../alsamixer/volume_mapping.c' object='volume_mapping.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o volume_mapping.o `test -f '../alsamixer/volume_mapping.c' || echo '$(srcdir)/'`../alsamixer/volume_mapping.c
-
-volume_mapping.obj: ../alsamixer/volume_mapping.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT volume_mapping.obj -MD -MP -MF $(DEPDIR)/volume_mapping.Tpo -c -o volume_mapping.obj `if test -f '../alsamixer/volume_mapping.c'; then $(CYGPATH_W) '../alsamixer/volume_mapping.c'; else $(CYGPATH_W) '$(srcdir)/../alsamixer/volume_mapping.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/volume_mapping.Tpo $(DEPDIR)/volume_mapping.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='../alsamixer/volume_mapping.c' object='volume_mapping.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o volume_mapping.obj `if test -f '../alsamixer/volume_mapping.c'; then $(CYGPATH_W) '../alsamixer/volume_mapping.c'; else $(CYGPATH_W) '$(srcdir)/../alsamixer/volume_mapping.c'; fi`
-install-man1: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man1dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.1[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic cscopelist ctags distclean distclean-compile \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-man1 \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/amixer/NOTICE b/amixer/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/amixer/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/amixer/amixer.1 b/amixer/amixer.1
index 76007d2..b1ac323 100644
--- a/amixer/amixer.1
+++ b/amixer/amixer.1
@@ -4,7 +4,7 @@
 .SH SYNOPSIS
 \fBamixer\fP [\fI\-option\fP] [\fIcmd\fP]
 .SH DESCRIPTION
-\fBamixer\fP allows command\-line control of the mixer for the ALSA
+\fBamixer\fP allows command-line control of the mixer for the ALSA
 soundcard driver.
 \fBamixer\fP supports multiple soundcards.
 
@@ -34,7 +34,7 @@
 \fIset\fP or \fIsset\fP <\fISCONTROL\fP> <\fIPARAMETER\fP> ...
 Sets the simple mixer control contents. The parameter can be the volume
 either as a percentage from 0% to 100% with \fI%\fP suffix,
-a dB gain with \fIdB\fP suffix (like \-12.5dB), or an exact hardware value.
+a dB gain with \fIdB\fP suffix (like -12.5dB), or an exact hardware value.
 The dB gain can be used only for the mixer elements with available
 dB information.
 When plus(+) or minus(\-) letter is appended after
@@ -96,7 +96,7 @@
 \fI\-s\fP | \fI\-\-stdin\fP
 
 Read from stdin and execute the command on each line sequentially.
-When this option is given, the command in command\-line arguments is ignored.
+When this option is given, the command in command-line arguments is ignored.
 
 Only sset and cset are accepted.  Other commands are ignored.
 The commands to unmatched ids are ignored without errors too.
@@ -104,21 +104,10 @@
 .TP
 \fI\-h\fP 
 Help: show syntax.
-
 .TP
 \fI\-q\fP
 Quiet mode. Do not show results of changes.
 
-.TP
-\fI\-R\fP 
-Use the raw value for evaluating the percentage representation.
-This is the default mode.
-
-.TP
-\fI\-M\fP 
-Use the mapped volume for evaluating the percentage representation
-like \fBalsamixer\fR, to be more natural for human ear.
-
 .SH EXAMPLES
 
 .TP
@@ -128,8 +117,8 @@
 capture (recording).\fR
 
 .TP
-\fBamixer \-c 1 \-\- sset Master playback \-20dB\fR
-will set the master volume of the second card to \-20dB.  If the master
+\fBamixer \-c 1 \-\- sset Master playback -20dB\fR
+will set the master volume of the second card to -20dB.  If the master
 has multiple channels, all channels are set to the same value.
 
 .TP
@@ -145,14 +134,8 @@
 \fBamixer \-c 2 cset numid=34 40%\fR
 will set the 34th soundcard element to 40%
 
-.SH SEE ALSO
-\fB
-alsamixer(1)
-\fP
-
 .SH BUGS 
 None known.
-
 .SH AUTHOR
 \fBamixer\fP is by Jaroslav Kysela <perex@perex.cz>.
 This document is by Paul Winkler <zarmzarm@erols.com> and Jaroslav Kysela <perex@perex.cz>.
diff --git a/amixer/amixer.c b/amixer/amixer.c
index 7727943..9d2855d 100644
--- a/amixer/amixer.c
+++ b/amixer/amixer.c
@@ -29,9 +29,7 @@
 #include <assert.h>
 #include <alsa/asoundlib.h>
 #include <sys/poll.h>
-#include <stdint.h>
 #include "amixer.h"
-#include "../alsamixer/volume_mapping.h"
 
 #define LEVEL_BASIC		(1<<0)
 #define LEVEL_INACTIVE		(1<<1)
@@ -70,8 +68,6 @@
 	printf("  -i,--inactive   show also inactive controls\n");
 	printf("  -a,--abstract L select abstraction level (none or basic)\n");
 	printf("  -s,--stdin      Read and execute commands from stdin sequentially\n");
-	printf("  -R,--raw-volume Use the raw value (default)\n");
-	printf("  -M,--mapped-volume Use the mapped volume\n");
 	printf("\nAvailable commands:\n");
 	printf("  scontrols       show all mixer simple controls\n");
 	printf("  scontents	  show contents of all mixer simple controls (default command)\n");
@@ -138,6 +134,11 @@
 	return 0;
 }
 
+static const char *control_iface(snd_ctl_elem_id_t *id)
+{
+	return snd_ctl_elem_iface_name(snd_ctl_elem_id_get_interface(id));
+}
+
 static const char *control_type(snd_ctl_elem_info_t *info)
 {
 	return snd_ctl_elem_type_name(snd_ctl_elem_info_get_type(info));
@@ -186,9 +187,9 @@
 
 /* Fuction to convert from volume to percentage. val = volume */
 
-static int convert_prange(long val, long min, long max)
+static int convert_prange(int val, int min, int max)
 {
-	long range = max - min;
+	int range = max - min;
 	int tmp;
 
 	if (range == 0)
@@ -203,88 +204,110 @@
 #define convert_prange1(val, min, max) \
 	ceil((val) * ((max) - (min)) * 0.01 + (min))
 
+static const char *get_percent(int val, int min, int max)
+{
+	static char str[32];
+	int p;
+	
+	p = convert_prange(val, min, max);
+	sprintf(str, "%i [%i%%]", val, p);
+	return str;
+}
+
+#if 0
+static const char *get_percent1(int val, int min, int max, int min_dB, int max_dB)
+{
+	static char str[32];
+	int p, db;
+
+	p = convert_prange(val, min, max);
+	db = convert_db_range(val, min, max, min_dB, max_dB);
+	sprintf(str, "%i [%i%%] [%i.%02idB]", val, p, db / 100, abs(db % 100));
+	return str;
+}
+#endif
+
+static long get_integer(char **ptr, long min, long max)
+{
+	long val = min;
+	char *p = *ptr, *s;
+
+	if (*p == ':')
+		p++;
+	if (*p == '\0' || (!isdigit(*p) && *p != '-'))
+		goto out;
+
+	s = p;
+	val = strtol(s, &p, 10);
+	if (*p == '.') {
+		p++;
+		strtol(p, &p, 10);
+	}
+	if (*p == '%') {
+		val = (long)convert_prange1(strtod(s, NULL), min, max);
+		p++;
+	}
+	val = check_range(val, min, max);
+	if (*p == ',')
+		p++;
+ out:
+	*ptr = p;
+	return val;
+}
+
+static long get_integer64(char **ptr, long long min, long long max)
+{
+	long long val = min;
+	char *p = *ptr, *s;
+
+	if (*p == ':')
+		p++;
+	if (*p == '\0' || (!isdigit(*p) && *p != '-'))
+		goto out;
+
+	s = p;
+	val = strtol(s, &p, 10);
+	if (*p == '.') {
+		p++;
+		strtol(p, &p, 10);
+	}
+	if (*p == '%') {
+		val = (long long)convert_prange1(strtod(s, NULL), min, max);
+		p++;
+	}
+	val = check_range(val, min, max);
+	if (*p == ',')
+		p++;
+ out:
+	*ptr = p;
+	return val;
+}
+
 struct volume_ops {
 	int (*get_range)(snd_mixer_elem_t *elem, long *min, long *max);
 	int (*get)(snd_mixer_elem_t *elem, snd_mixer_selem_channel_id_t c,
 		   long *value);
 	int (*set)(snd_mixer_elem_t *elem, snd_mixer_selem_channel_id_t c,
-		   long value, int dir);
+		   long value);
 };
 	
-enum { VOL_RAW, VOL_DB, VOL_MAP };
+enum { VOL_RAW, VOL_DB };
 
 struct volume_ops_set {
 	int (*has_volume)(snd_mixer_elem_t *elem);
-	struct volume_ops v[3];
+	struct volume_ops v[2];
 };
 
 static int set_playback_dB(snd_mixer_elem_t *elem,
-			   snd_mixer_selem_channel_id_t c, long value, int dir)
+			   snd_mixer_selem_channel_id_t c, long value)
 {
-	return snd_mixer_selem_set_playback_dB(elem, c, value, dir);
+	return snd_mixer_selem_set_playback_dB(elem, c, value, 0);
 }
 
 static int set_capture_dB(snd_mixer_elem_t *elem,
-			  snd_mixer_selem_channel_id_t c, long value, int dir)
+			  snd_mixer_selem_channel_id_t c, long value)
 {
-	return snd_mixer_selem_set_capture_dB(elem, c, value, dir);
-}
-
-static int set_playback_raw_volume(snd_mixer_elem_t *elem,
-				   snd_mixer_selem_channel_id_t c,
-				   long value, int dir)
-{
-	return snd_mixer_selem_set_playback_volume(elem, c, value);
-}
-
-static int set_capture_raw_volume(snd_mixer_elem_t *elem,
-				  snd_mixer_selem_channel_id_t c,
-				  long value, int dir)
-{
-	return snd_mixer_selem_set_capture_volume(elem, c, value);
-}
-
-/* FIXME: normalize to int32 space to be compatible with other types */
-#define MAP_VOL_RES	(INT32_MAX / 100)
-
-static int get_mapped_volume_range(snd_mixer_elem_t *elem,
-				   long *pmin, long *pmax)
-{
-	*pmin = 0;
-	*pmax = MAP_VOL_RES;
-	return 0;
-}
-
-static int get_playback_mapped_volume(snd_mixer_elem_t *elem,
-				      snd_mixer_selem_channel_id_t c,
-				      long *value)
-{
-	*value = (rint)(get_normalized_playback_volume(elem, c) * MAP_VOL_RES);
-	return 0;
-}
-
-static int set_playback_mapped_volume(snd_mixer_elem_t *elem,
-				      snd_mixer_selem_channel_id_t c,
-				      long value, int dir)
-{
-	return set_normalized_playback_volume(elem, c,
-					      (double)value / MAP_VOL_RES, dir);
-}
-
-static int get_capture_mapped_volume(snd_mixer_elem_t *elem,
-				     snd_mixer_selem_channel_id_t c,
-				     long *value)
-{
-	*value = (rint)(get_normalized_capture_volume(elem, c) * MAP_VOL_RES);
-	return 0;
-}
-
-static int set_capture_mapped_volume(snd_mixer_elem_t *elem,
-				     snd_mixer_selem_channel_id_t c,
-				     long value, int dir)
-{
-	return set_normalized_capture_volume(elem, c,
-					     (double)value / MAP_VOL_RES, dir);
+	return snd_mixer_selem_set_capture_dB(elem, c, value, 0);
 }
 
 static const struct volume_ops_set vol_ops[2] = {
@@ -292,42 +315,29 @@
 		.has_volume = snd_mixer_selem_has_playback_volume,
 		.v = {{ snd_mixer_selem_get_playback_volume_range,
 			snd_mixer_selem_get_playback_volume,
-			set_playback_raw_volume },
+			snd_mixer_selem_set_playback_volume },
 		      { snd_mixer_selem_get_playback_dB_range,
 			snd_mixer_selem_get_playback_dB,
-			set_playback_dB },
-		      { get_mapped_volume_range,
-			get_playback_mapped_volume,
-			set_playback_mapped_volume },
-		},
+			set_playback_dB }},
 	},
 	{
 		.has_volume = snd_mixer_selem_has_capture_volume,
 		.v = {{ snd_mixer_selem_get_capture_volume_range,
 			snd_mixer_selem_get_capture_volume,
-			set_capture_raw_volume },
+			snd_mixer_selem_set_capture_volume },
 		      { snd_mixer_selem_get_capture_dB_range,
 			snd_mixer_selem_get_capture_dB,
-			set_capture_dB },
-		      { get_mapped_volume_range,
-			get_capture_mapped_volume,
-			set_capture_mapped_volume },
-		},
+			set_capture_dB }},
 	},
 };
 
-static int std_vol_type = VOL_RAW;
-
 static int set_volume_simple(snd_mixer_elem_t *elem,
 			     snd_mixer_selem_channel_id_t chn,
 			     char **ptr, int dir)
 {
 	long val, orig, pmin, pmax;
 	char *p = *ptr, *s;
-	int invalid = 0, percent = 0, err = 0;
-	int vol_type = std_vol_type;
-	double scale = 1.0;
-	int correct = 0;
+	int invalid = 0, err = 0, vol_type = VOL_RAW;
 
 	if (! vol_ops[dir].has_volume(elem))
 		invalid = 1;
@@ -337,6 +347,10 @@
 	if (*p == '\0' || (!isdigit(*p) && *p != '-'))
 		goto skip;
 
+	if (! invalid &&
+	    vol_ops[dir].v[VOL_RAW].get_range(elem, &pmin, &pmax) < 0)
+		invalid = 1;
+
 	s = p;
 	val = strtol(s, &p, 10);
 	if (*p == '.') {
@@ -344,37 +358,32 @@
 		strtol(p, &p, 10);
 	}
 	if (*p == '%') {
-		percent = 1;
+		if (! invalid)
+			val = (long)convert_prange1(strtod(s, NULL), pmin, pmax);
 		p++;
 	} else if (p[0] == 'd' && p[1] == 'B') {
-		vol_type = VOL_DB;
+		if (! invalid) {
+			val = (long)(strtod(s, NULL) * 100.0);
+			vol_type = VOL_DB;
+			if (vol_ops[dir].v[vol_type].get_range(elem, &pmin, &pmax) < 0)
+				invalid = 1;
+