Project import generated by Copybara.
GitOrigin-RevId: 77bcd1a7b643dd9ab7c4a29a0e77e96b09566213
diff --git a/ABOUT-NLS b/ABOUT-NLS
deleted file mode 100644
index b1de1b6..0000000
--- a/ABOUT-NLS
+++ /dev/null
@@ -1,1282 +0,0 @@
-1 Notes on the Free Translation Project
-***************************************
-
-Free software is going international! The Free Translation Project is
-a way to get maintainers of free software, translators, and users all
-together, so that free software will gradually become able to speak many
-languages. A few packages already provide translations for their
-messages.
-
- If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site. But you do _not_
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
- Installers will find here some useful hints. These notes also
-explain how users should proceed for getting the programs to use the
-available translations. They tell how people wanting to contribute and
-work on translations can contact the appropriate team.
-
-1.1 INSTALL Matters
-===================
-
-Some packages are "localizable" when properly installed; the programs
-they contain can be made to speak your own native language. Most such
-packages use GNU `gettext'. Other packages have their own ways to
-internationalization, predating GNU `gettext'.
-
- By default, this package will be installed to allow translation of
-messages. It will automatically detect whether the system already
-provides the GNU `gettext' functions. Installers may use special
-options at configuration time for changing the default behaviour. The
-command:
-
- ./configure --disable-nls
-
-will _totally_ disable translation of messages.
-
- When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl' library
-and will decide to use it. If not, you may have to to use the
-`--with-libintl-prefix' option to tell `configure' where to look for it.
-
- Internationalized packages usually have many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language. Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package. However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-1.2 Using This Package
-======================
-
-As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-`LL_CC' combination. If you happen to have the `LC_ALL' or some other
-`LC_xxx' environment variables set, you should unset them before
-setting `LANG', otherwise the setting of `LANG' will not have the
-desired effect. Here `LL' is an ISO 639 two-letter language code, and
-`CC' is an ISO 3166 two-letter country code. For example, let's
-suppose that you speak German and live in Germany. At the shell
-prompt, merely execute `setenv LANG de_DE' (in `csh'),
-`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-This can be done from your `.login' or `.profile' file, once and for
-all.
-
- You might think that the country code specification is redundant.
-But in fact, some languages have dialects in different countries. For
-example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
-country code serves to distinguish the dialects.
-
- The locale naming convention of `LL_CC', with `LL' denoting the
-language and `CC' denoting the country, is the one use on systems based
-on GNU libc. On other systems, some variations of this scheme are
-used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
-locales supported by your system for your language by running the
-command `locale -a | grep '^LL''.
-
- Not all programs have translations for all languages. By default, an
-English message is shown in place of a nonexistent translation. If you
-understand other languages, you can set up a priority list of languages.
-This is done through a different environment variable, called
-`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-for the purpose of message handling, but you still need to have `LANG'
-set to the primary language; this is required by other parts of the
-system libraries. For example, some Swedish users who would rather
-read translations in German than English for when Swedish is not
-available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-
- Special advice for Norwegian users: The language code for Norwegian
-bokma*l changed from `no' to `nb' recently (in 2003). During the
-transition period, while some message catalogs for this language are
-installed under `nb' and some older ones under `no', it's recommended
-for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-older translations are used.
-
- In the `LANGUAGE' environment variable, but not in the `LANG'
-environment variable, `LL_CC' combinations can be abbreviated as `LL'
-to denote the language's main dialect. For example, `de' is equivalent
-to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-(Portuguese as spoken in Portugal) in this context.
-
-1.3 Translating Teams
-=====================
-
-For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list. The up-to-date list of
-teams can be found at the Free Translation Project's homepage,
-`http://translationproject.org/', in the "Teams" area.
-
- If you'd like to volunteer to _work_ at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is _not_ the same as the list itself, it has
-`-request' appended. For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
- subscribe
-
- Keep in mind that team members are expected to participate
-_actively_ in translations, or at solving translational difficulties,
-rather than merely lurking around. If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `coordinator@translationproject.org' to
-reach the coordinator for all translator teams.
-
- The English team is special. It works at improving and uniformizing
-the terminology in use. Proven linguistic skills are praised more than
-programming skills, here.
-
-1.4 Available Packages
-======================
-
-Languages are not equally supported in all packages. The following
-matrix shows the current state of internationalization, as of June
-2010. The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination, with a
-translation percentage of at least 50%.
-
- Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca
- +--------------------------------------------------+
- a2ps | [] [] |
- aegis | |
- ant-phone | |
- anubis | |
- aspell | [] [] |
- bash | |
- bfd | |
- bibshelf | [] |
- binutils | |
- bison | |
- bison-runtime | [] |
- bluez-pin | [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] [] |
- cpio | |
- cppi | |
- cpplib | [] |
- cryptsetup | |
- dfarc | |
- dialog | [] [] |
- dico | |
- diffutils | [] |
- dink | |
- doodle | |
- e2fsprogs | [] |
- enscript | [] |
- exif | |
- fetchmail | [] |
- findutils | [] |
- flex | [] |
- freedink | |
- gas | |
- gawk | [] [] |
- gcal | [] |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] |
- gettext-tools | [] [] |
- gip | [] |
- gjay | |
- gliv | [] |
- glunarclock | [] [] |
- gnubiff | |
- gnucash | [] |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | |
- gold | |
- gpe-aerial | |
- gpe-beam | |
- gpe-bluetooth | |
- gpe-calendar | |
- gpe-clock | [] |
- gpe-conf | |
- gpe-contacts | |
- gpe-edit | |
- gpe-filemanager | |
- gpe-go | |
- gpe-login | |
- gpe-ownerinfo | [] |
- gpe-package | |
- gpe-sketchbook | |
- gpe-su | [] |
- gpe-taskmanager | [] |
- gpe-timesheet | [] |
- gpe-today | [] |
- gpe-todo | |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | [] [] |
- gsasl | |
- gss | |
- gst-plugins-bad | [] |
- gst-plugins-base | [] |
- gst-plugins-good | [] |
- gst-plugins-ugly | [] |
- gstreamer | [] [] [] |
- gtick | |
- gtkam | [] |
- gtkorphan | [] |
- gtkspell | [] [] [] |
- gutenprint | |
- hello | [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | [] [] |
- iso_15924 | |
- iso_3166 | [] [] [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | |
- iso_639 | [] [] [] [] |
- iso_639_3 | |
- jwhois | |
- kbd | |
- keytouch | [] |
- keytouch-editor | |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | |
- ld | [] |
- leafpad | [] [] |
- libc | [] [] |
- libexif | () |
- libextractor | |
- libgnutls | |
- libgpewidget | |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | [] |
- libidn | |
- lifelines | |
- liferea | [] [] |
- lilypond | |
- linkdr | [] |
- lordsawar | |
- lprng | |
- lynx | [] |
- m4 | |
- mailfromd | |
- mailutils | |
- make | |
- man-db | |
- man-db-manpages | |
- minicom | |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | |
- psmisc | |
- pspp | [] |
- pwdutils | |
- radius | [] |
- recode | [] [] |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] |
- sed | [] [] |
- sharutils | [] [] |
- shishi | |
- skencil | |
- solfege | |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | |
- tar | [] |
- texinfo | |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] [] |
- wyslij-po | |
- xchat | [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] |
- +--------------------------------------------------+
- af am an ar as ast az be be@latin bg bn_IN bs ca
- 6 0 1 2 3 19 1 10 3 28 3 1 38
-
- crh cs da de el en en_GB en_ZA eo es et eu fa
- +-------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] () |
- anubis | [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] [] |
- bfd | [] |
- bibshelf | [] [] [] |
- binutils | [] |
- bison | [] [] |
- bison-runtime | [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] [] [] |
- cflow | [] [] |
- clisp | [] [] [] [] |
- coreutils | [] [] [] [] |
- cpio | |
- cppi | |
- cpplib | [] [] [] |
- cryptsetup | [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] |
- dink | [] [] [] |
- doodle | [] |
- e2fsprogs | [] [] [] |
- enscript | [] [] [] |
- exif | () [] [] |
- fetchmail | [] [] () [] [] [] |
- findutils | [] [] [] |
- flex | [] [] |
- freedink | [] [] [] |
- gas | [] |
- gawk | [] [] [] |
- gcal | [] |
- gcc | [] [] |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] [] [] |
- gettext-tools | [] [] [] |
- gip | [] [] [] [] |
- gjay | [] |
- gliv | [] [] [] |
- glunarclock | [] [] |
- gnubiff | () |
- gnucash | [] () () () () |
- gnuedu | [] [] |
- gnulib | [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] |
- gpe-aerial | [] [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] |
- gpe-conf | [] [] [] |
- gpe-contacts | [] [] [] |
- gpe-edit | [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] |
- gpe-taskmanager | [] [] [] [] |
- gpe-timesheet | [] [] [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] () [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] |
- grub | [] [] |
- gsasl | [] |
- gss | |
- gst-plugins-bad | [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] () [] |
- gtkam | [] [] () [] [] |
- gtkorphan | [] [] [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | [] [] [] |
- hello | [] [] [] [] |
- help2man | [] |
- hylafax | [] [] |
- idutils | [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] [] [] [] () [] [] [] () |
- iso_3166_2 | () |
- iso_4217 | [] [] [] () [] [] |
- iso_639 | [] [] [] [] () [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | [] [] [] [] [] |
- keytouch | [] [] |
- keytouch-editor | [] [] |
- keytouch-keyboa... | [] |
- klavaro | [] [] [] [] |
- latrine | [] () |
- ld | [] [] |
- leafpad | [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] () |
- libgphoto2_port | [] () [] |
- libgsasl | |
- libiconv | [] [] [] [] [] |
- libidn | [] [] [] |
- lifelines | [] () |
- liferea | [] [] [] [] [] |
- lilypond | [] [] [] |
- linkdr | [] [] [] |
- lordsawar | [] |
- lprng | |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailfromd | |
- mailutils | [] |
- make | [] [] [] |
- man-db | |
- man-db-manpages | |
- minicom | [] [] [] [] |
- mkisofs | |
- myserver | |
- nano | [] [] [] |
- opcodes | [] [] |
- parted | [] [] |
- pies | |
- popt | [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] |
- pwdutils | [] |
- radius | [] |
- recode | [] [] [] [] [] [] |
- rosegarden | () () () |
- rpm | [] [] [] |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] |
- sed | [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | |
- skencil | [] () [] |
- solfege | [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] [] |
- sp | [] |
- sysstat | [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] |
- tin | [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] |
- vice | () () |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] |
- wyslij-po | |
- xchat | [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] [] |
- +-------------------------------------------------+
- crh cs da de el en en_GB en_ZA eo es et eu fa
- 5 64 105 117 18 1 8 0 28 89 18 19 0
-
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- +----------------------------------------------------+
- a2ps | [] [] [] [] |
- aegis | [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] [] |
- aspell | [] [] [] [] |
- bash | [] [] [] [] |
- bfd | [] [] [] |
- bibshelf | [] [] [] [] [] |
- binutils | [] [] [] |
- bison | [] [] [] [] |
- bison-runtime | [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] |
- cflow | [] [] [] |
- clisp | [] |
- coreutils | [] [] [] [] [] |
- cpio | [] [] [] [] |
- cppi | [] [] |
- cpplib | [] [] [] |
- cryptsetup | [] [] [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] [] [] [] |
- dink | [] |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] |
- exif | [] [] [] [] [] [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] [] |
- flex | [] [] [] |
- freedink | [] [] [] |
- gas | [] [] |
- gawk | [] [] [] [] () [] |
- gcal | [] |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] |
- gip | [] [] [] [] [] [] |
- gjay | [] |
- gliv | [] () |
- glunarclock | [] [] [] [] |
- gnubiff | () [] () |
- gnucash | () () () () () [] |
- gnuedu | [] [] |
- gnulib | [] [] [] [] [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] [] |
- gpe-aerial | [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] [] [] |
- gpe-calendar | [] [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] [] [] |
- gpe-contacts | [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] [] |
- gpe-go | [] [] [] [] [] |
- gpe-login | [] [] [] |
- gpe-ownerinfo | [] [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] [] [] [] [] |
- gprof | [] [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] [] |
- grub | [] [] [] [] |
- gsasl | [] [] [] [] [] |
- gss | [] [] [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] [] [] |
- gtkam | [] [] [] [] [] |
- gtkorphan | [] [] [] |
- gtkspell | [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] [] [] |
- hello | [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | () [] [] [] |
- iso_4217 | [] () [] [] [] [] |
- iso_639 | [] () [] [] [] [] [] [] [] |
- iso_639_3 | () [] [] |
- jwhois | [] [] [] [] [] |
- kbd | [] [] |
- keytouch | [] [] [] [] [] [] |
- keytouch-editor | [] [] [] [] [] |
- keytouch-keyboa... | [] [] [] [] [] |
- klavaro | [] [] |
- latrine | [] [] [] |
- ld | [] [] [] [] |
- leafpad | [] [] [] [] [] [] [] () |
- libc | [] [] [] [] [] |
- libexif | [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] [] |
- libgphoto2_port | [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] [] |
- libidn | [] [] [] [] |
- lifelines | () |
- liferea | [] [] [] [] |
- lilypond | [] [] |
- linkdr | [] [] [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] [] [] |
- m4 | [] [] [] [] [] [] |
- mailfromd | |
- mailutils | [] [] |
- make | [] [] [] [] [] [] [] [] [] |
- man-db | [] [] |
- man-db-manpages | [] |
- minicom | [] [] [] [] [] |
- mkisofs | [] [] [] [] |
- myserver | |
- nano | [] [] [] [] [] [] |
- opcodes | [] [] [] [] |
- parted | [] [] [] [] |
- pies | |
- popt | [] [] [] [] [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | |
- pwdutils | [] [] |
- radius | [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () () () () |
- rpm | [] [] |
- rush | |
- sarg | [] |
- screem | [] [] |
- scrollkeeper | [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] [] [] [] |
- shishi | [] |
- skencil | [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] |
- sp | [] () |
- sysstat | [] [] [] [] [] |
- tar | [] [] [] [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | [] [] |
- util-linux-ng | [] [] [] [] [] [] |
- vice | () () () |
- vmm | [] |
- vorbis-tools | [] |
- wastesedge | () () |
- wdiff | [] |
- wget | [] [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] |
- +----------------------------------------------------+
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
-
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- +-----------------------------------------------+
- a2ps | [] |
- aegis | |
- ant-phone | |
- anubis | [] [] |
- aspell | [] |
- bash | |
- bfd | |
- bibshelf | [] [] |
- binutils | |
- bison | [] |
- bison-runtime | [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] |
- cpio | |
- cppi | |
- cpplib | |
- cryptsetup | |
- dfarc | [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] |
- dink | |
- doodle | |
- e2fsprogs | |
- enscript | |
- exif | [] |
- fetchmail | |
- findutils | |
- flex | |
- freedink | [] |
- gas | |
- gawk | |
- gcal | |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] |
- gettext-tools | [] |
- gip | [] [] |
- gjay | |
- gliv | |
- glunarclock | [] |
- gnubiff | |
- gnucash | () () () () |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] |
- gold | |
- gpe-aerial | [] |
- gpe-beam | [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] |
- gpe-contacts | [] [] |
- gpe-edit | [] |
- gpe-filemanager | [] [] |
- gpe-go | [] [] [] |
- gpe-login | [] |
- gpe-ownerinfo | [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] |
- gpe-timesheet | [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | |
- gsasl | |
- gss | |
- gst-plugins-bad | [] [] [] [] |
- gst-plugins-base | [] [] |
- gst-plugins-good | [] [] |
- gst-plugins-ugly | [] [] [] [] [] |
- gstreamer | |
- gtick | |
- gtkam | [] |
- gtkorphan | [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | |
- hello | [] [] [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | |
- iso_15924 | [] [] |
- iso_3166 | [] [] () [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | [] [] |
- iso_639 | [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | |
- keytouch | [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | [] |
- ld | |
- leafpad | [] [] [] |
- libc | [] |
- libexif | |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | |
- libidn | |
- lifelines | |
- liferea | |
- lilypond | |
- linkdr | |
- lordsawar | |
- lprng | |
- lynx | |
- m4 | |
- mailfromd | |
- mailutils | |
- make | [] |
- man-db | |
- man-db-manpages | |
- minicom | [] |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | [] [] [] |
- psmisc | |
- pspp | |
- pwdutils | |
- radius | |
- recode | |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] |
- sed | |
- sharutils | |
- shishi | |
- skencil | |
- solfege | [] |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | [] |
- tar | [] |
- texinfo | [] |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] |
- wyslij-po | |
- xchat | [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +-----------------------------------------------+
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
-
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] |
- bfd | [] |
- bibshelf | [] [] |
- binutils | [] [] |
- bison | [] [] [] |
- bison-runtime | [] [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] () |
- buzztard | [] [] |
- cflow | [] |
- clisp | [] [] |
- coreutils | [] [] [] [] [] [] |
- cpio | [] [] [] |
- cppi | [] |
- cpplib | [] |
- cryptsetup | [] |
- dfarc | [] |
- dialog | [] [] [] [] |
- dico | [] |
- diffutils | [] [] [] [] [] [] |
- dink | () |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] [] |
- exif | [] [] [] () [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] |
- flex | [] [] [] [] [] |
- freedink | [] [] |
- gas | |
- gawk | [] [] [] [] |
- gcal | |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] [] [] |
- gip | [] [] [] [] [] |
- gjay | |
- gliv | [] [] [] [] [] [] |
- glunarclock | [] [] [] [] [] |
- gnubiff | [] () |
- gnucash | [] () () () |
- gnuedu | [] |
- gnulib | [] [] [] [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] [] |
- gold | |
- gpe-aerial | [] [] [] [] [] [] [] |
- gpe-beam | [] [] [] [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] [] [] [] |
- gpe-clock | [] [] [] [] [] [] [] [] |
- gpe-conf | [] [] [] [] [] [] [] |
- gpe-contacts | [] [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] [] [] [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] [] [] [] [] [] |
- gpe-su | [] [] [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] [] [] |
- gphoto2 | [] [] [] [] [] [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] |
- gramadoir | [] [] |
- grep | [] [] [] [] |
- grub | [] [] [] |
- gsasl | [] [] [] [] |
- gss | [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] |
- gtkam | [] [] [] [] [] [] |
- gtkorphan | [] |
- gtkspell | [] [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] |
- hello | [] [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] [] [] [] |
- iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
- iso_3166_2 | [] [] [] |
- iso_4217 | [] [] [] [] [] [] [] [] |
- iso_639 | [] [] [] [] [] [] [] [] [] |
- iso_639_3 | [] [] |
- jwhois | [] [] [] [] |
- kbd | [] [] [] |
- keytouch | [] [] [] |
- keytouch-editor | [] [] [] |
- keytouch-keyboa... | [] [] [] |
- klavaro | [] [] |
- latrine | [] [] |
- ld | |
- leafpad | [] [] [] [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] |
- libgphoto2_port | [] [] [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] |
- libidn | [] [] |
- lifelines | [] [] |
- liferea | [] [] [] [] [] () () [] |
- lilypond | [] |
- linkdr | [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] |
- m4 | [] [] [] [] [] |
- mailfromd | [] |
- mailutils | [] |
- make | [] [] [] [] |
- man-db | [] [] [] |
- man-db-manpages | [] [] [] |
- minicom | [] [] [] [] |
- mkisofs | [] [] [] |
- myserver | |
- nano | [] [] [] [] |
- opcodes | [] [] |
- parted | [] [] [] [] |
- pies | [] |
- popt | [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] [] |
- pwdutils | [] |
- radius | [] [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () |
- rpm | [] [] [] |
- rush | [] [] |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | [] |
- skencil | [] [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] [] |
- soundtracker | [] |
- sp | |
- sysstat | [] [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] [] |
- vice | [] |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +---------------------------------------------------+
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
-
- sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] | 27
- aegis | [] | 9
- ant-phone | [] [] [] [] | 9
- anubis | [] [] [] [] | 15
- aspell | [] [] [] | 20
- bash | [] [] [] | 12
- bfd | [] | 6
- bibshelf | [] [] [] | 16
- binutils | [] [] | 8
- bison | [] [] | 12
- bison-runtime | [] [] [] [] [] [] | 29
- bluez-pin | [] [] [] [] [] [] [] [] | 37
- bombono-dvd | [] | 4
- buzztard | [] | 7
- cflow | [] [] [] | 9
- clisp | | 10
- coreutils | [] [] [] [] | 22
- cpio | [] [] [] [] [] [] | 13
- cppi | [] [] | 5
- cpplib | [] [] [] [] [] [] | 14
- cryptsetup | [] [] | 7
- dfarc | [] | 9
- dialog | [] [] [] [] [] [] [] | 30
- dico | [] | 2
- diffutils | [] [] [] [] [] [] | 30
- dink | | 4
- doodle | [] [] | 7
- e2fsprogs | [] [] [] | 11
- enscript | [] [] [] [] | 17
- exif | [] [] [] | 16
- fetchmail | [] [] [] | 17
- findutils | [] [] [] [] [] | 20
- flex | [] [] [] [] | 15
- freedink | [] | 10
- gas | [] | 4
- gawk | [] [] [] [] | 18
- gcal | [] [] | 5
- gcc | [] [] [] | 7
- gettext-examples | [] [] [] [] [] [] [] | 34
- gettext-runtime | [] [] [] [] [] [] [] | 29
- gettext-tools | [] [] [] [] [] [] | 22
- gip | [] [] [] [] | 22
- gjay | [] | 3
- gliv | [] [] [] | 14
- glunarclock | [] [] [] [] [] | 19
- gnubiff | [] [] | 4
- gnucash | () [] () [] () | 10
- gnuedu | [] [] | 7
- gnulib | [] [] [] [] | 16
- gnunet | [] | 1
- gnunet-gtk | [] [] [] | 5
- gnutls | [] [] [] | 10
- gold | [] | 4
- gpe-aerial | [] [] [] | 18
- gpe-beam | [] [] [] | 19
- gpe-bluetooth | [] [] [] | 13
- gpe-calendar | [] [] [] [] | 12
- gpe-clock | [] [] [] [] [] | 28
- gpe-conf | [] [] [] [] | 20
- gpe-contacts | [] [] [] | 17
- gpe-edit | [] [] [] | 12
- gpe-filemanager | [] [] [] [] | 16
- gpe-go | [] [] [] [] [] | 25
- gpe-login | [] [] [] | 11
- gpe-ownerinfo | [] [] [] [] [] | 25
- gpe-package | [] [] [] | 13
- gpe-sketchbook | [] [] [] | 20
- gpe-su | [] [] [] [] [] | 30
- gpe-taskmanager | [] [] [] [] [] | 29
- gpe-timesheet | [] [] [] [] [] | 25
- gpe-today | [] [] [] [] [] [] | 30
- gpe-todo | [] [] [] [] | 17
- gphoto2 | [] [] [] [] [] | 24
- gprof | [] [] [] | 15
- gpsdrive | [] [] [] | 11
- gramadoir | [] [] [] | 11
- grep | [] [] [] | 10
- grub | [] [] [] | 14
- gsasl | [] [] [] [] | 14
- gss | [] [] [] | 11
- gst-plugins-bad | [] [] [] [] | 26
- gst-plugins-base | [] [] [] [] [] | 24
- gst-plugins-good | [] [] [] [] | 24
- gst-plugins-ugly | [] [] [] [] [] | 29
- gstreamer | [] [] [] [] | 22
- gtick | [] [] [] | 13
- gtkam | [] [] [] | 20
- gtkorphan | [] [] [] | 14
- gtkspell | [] [] [] [] [] [] [] [] [] | 45
- gutenprint | [] | 10
- hello | [] [] [] [] [] [] | 21
- help2man | [] [] | 7
- hylafax | [] | 5
- idutils | [] [] [] [] | 17
- indent | [] [] [] [] [] [] | 30
- iso_15924 | () [] () [] [] | 16
- iso_3166 | [] [] () [] [] () [] [] [] () | 53
- iso_3166_2 | () [] () [] | 9
- iso_4217 | [] () [] [] () [] [] | 26
- iso_639 | [] [] [] () [] () [] [] [] [] | 38
- iso_639_3 | [] () | 8
- jwhois | [] [] [] [] [] | 16
- kbd | [] [] [] [] [] | 15
- keytouch | [] [] [] | 16
- keytouch-editor | [] [] [] | 14
- keytouch-keyboa... | [] [] [] | 14
- klavaro | [] | 11
- latrine | [] [] [] | 10
- ld | [] [] [] [] | 11
- leafpad | [] [] [] [] [] [] | 33
- libc | [] [] [] [] [] | 21
- libexif | [] () | 7
- libextractor | [] | 1
- libgnutls | [] [] [] | 9
- libgpewidget | [] [] [] | 14
- libgpg-error | [] [] [] | 9
- libgphoto2 | [] [] | 8
- libgphoto2_port | [] [] [] [] | 14
- libgsasl | [] [] [] | 13
- libiconv | [] [] [] [] | 21
- libidn | () [] [] | 11
- lifelines | [] | 4
- liferea | [] [] [] | 21
- lilypond | [] | 7
- linkdr | [] [] [] [] [] | 17
- lordsawar | | 1
- lprng | [] | 3
- lynx | [] [] [] [] | 17
- m4 | [] [] [] [] | 19
- mailfromd | [] [] | 3
- mailutils | [] | 5
- make | [] [] [] [] | 21
- man-db | [] [] [] | 8
- man-db-manpages | | 4
- minicom | [] [] | 16
- mkisofs | [] [] | 9
- myserver | | 0
- nano | [] [] [] [] | 21
- opcodes | [] [] [] | 11
- parted | [] [] [] [] [] | 15
- pies | [] [] | 3
- popt | [] [] [] [] [] [] | 27
- psmisc | [] [] | 11
- pspp | | 4
- pwdutils | [] [] | 6
- radius | [] [] | 9
- recode | [] [] [] [] | 28
- rosegarden | () | 0
- rpm | [] [] [] | 11
- rush | [] [] | 4
- sarg | | 1
- screem | [] | 3
- scrollkeeper | [] [] [] [] [] | 27
- sed | [] [] [] [] [] | 30
- sharutils | [] [] [] [] [] | 22
- shishi | [] | 3
- skencil | [] [] | 7
- solfege | [] [] [] [] | 16
- solfege-manual | [] | 8
- soundtracker | [] [] [] | 9
- sp | [] | 3
- sysstat | [] [] | 15
- tar | [] [] [] [] [] [] | 23
- texinfo | [] [] [] [] [] | 17
- tin | | 4
- unicode-han-tra... | | 0
- unicode-transla... | | 2
- util-linux-ng | [] [] [] [] | 20
- vice | () () | 1
- vmm | [] | 4
- vorbis-tools | [] | 6
- wastesedge | | 2
- wdiff | [] [] | 7
- wget | [] [] [] [] [] | 26
- wyslij-po | [] [] | 8
- xchat | [] [] [] [] [] [] | 36
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63
- xkeyboard-config | [] [] [] | 22
- +---------------------------------------------------+
- 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618
-
- Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect. This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
- For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer. There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
- If June 2010 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
-matrix with full percentage details can be found at
-`http://translationproject.org/extra/matrix.html'.
-
-1.5 Using `gettext' in new packages
-===================================
-
-If you are writing a freely available program and want to
-internationalize it you are welcome to use GNU `gettext' in your
-package. Of course you have to respect the GNU Library General Public
-License which covers the use of the GNU `gettext' library. This means
-in particular that even non-free programs can use `libintl' as a shared
-library, whereas only free software can use `libintl' as a static
-library or use modified versions of `libintl'.
-
- Once the sources are changed appropriately and the setup can handle
-the use of `gettext' the only thing missing are the translations. The
-Free Translation Project is also available for packages which are not
-developed inside the GNU project. Therefore the information given above
-applies also for every other Free Software Project. Contact
-`coordinator@translationproject.org' to make the `.pot' files available
-to the translation teams.
-
diff --git a/Android.mk b/Android.mk
deleted file mode 100644
index 870bf33..0000000
--- a/Android.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-SUB_MAKEFILES := $(call all-subdir-makefiles)
-COMMON_ALSA_UTILS_INCLUDES := $(LOCAL_PATH)/include \
- $(call include-path-for, libasound)
-COMMON_ALSA_UTILS_CFLAGS := -D_GNU_SOURCE
-COMMON_ALSA_UTILS_LIBS := asound
-
-include $(SUB_MAKEFILES)
diff --git a/INSTALL b/INSTALL
index 544d5d2..202c491 100644
--- a/INSTALL
+++ b/INSTALL
@@ -24,11 +24,11 @@
header file asoundlib.h in $prefix/include/alsa directory (usually in
/usr/include/alsa directory).
-Compilation from git sources
+Compilation from HG sources
---------------------------
You need also GNU packages autoconf and automake installed in your system
-to compile git sources of alsa-utils package.
+to compile HG (Mercurial) sources of alsa-utils package.
For compilation you can use these commands:
@@ -40,7 +40,7 @@
./configure
make
-The included gitcompile script does this job for you.
+The included hgcompile script does this job for you.
Note: Some automake packages have missing aclocal program. Use newer version
in the case.
diff --git a/LICENSE b/LICENSE
new file mode 120000
index 0000000..d24842f
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1 @@
+COPYING
\ No newline at end of file
diff --git a/Makefile.am b/Makefile.am
index 5d5c38e..21d69ab 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -23,7 +23,7 @@
SUBDIRS += seq
endif
-EXTRA_DIST= config.rpath TODO gitcompile
+EXTRA_DIST= TODO gitcompile
AUTOMAKE_OPTIONS=foreign
ACLOCAL_AMFLAGS = -I m4
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 89c668d..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,797 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@ALSAMIXER_TRUE@am__append_1 = alsamixer
-@HAVE_MIXER_TRUE@am__append_2 = amixer
-@HAVE_RAWMIDI_TRUE@am__append_3 = amidi
-@ALSACONF_TRUE@am__append_4 = alsaconf
-@HAVE_PCM_TRUE@am__append_5 = aplay iecset speaker-test
-@ALSALOOP_TRUE@@HAVE_PCM_TRUE@am__append_6 = alsaloop
-@HAVE_SEQ_TRUE@am__append_7 = seq
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/alsaconf/po/Makefile.in \
- $(top_srcdir)/configure ABOUT-NLS COPYING ChangeLog INSTALL \
- TODO config.guess config.rpath config.sub install-sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES = alsaconf/po/Makefile
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- cscope distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DIST_SUBDIRS = include alsactl alsaucm utils m4 po alsamixer amixer \
- amidi alsaconf aplay iecset speaker-test alsaloop seq
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- if test -d "$(distdir)"; then \
- find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -rf "$(distdir)" \
- || { sleep 5 && rm -rf "$(distdir)"; }; \
- else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
- | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-SUBDIRS = include alsactl alsaucm utils m4 po $(am__append_1) \
- $(am__append_2) $(am__append_3) $(am__append_4) \
- $(am__append_5) $(am__append_6) $(am__append_7)
-EXTRA_DIST = config.rpath TODO gitcompile
-AUTOMAKE_OPTIONS = foreign
-ACLOCAL_AMFLAGS = -I m4
-DISTCHECK_CONFIGURE_FLAGS = \
- --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
-
-all: all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-alsaconf/po/Makefile: $(top_builddir)/config.status $(top_srcdir)/alsaconf/po/Makefile.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscope: cscope.files
- test ! -s cscope.files \
- || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-
-clean-cscope:
- -rm -f cscope.files
-
-cscope.files: clean-cscope cscopelist-recursive cscopelist
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
- -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-hook
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__post_remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__post_remove_distdir)
-
-dist-lzip: distdir
- tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__post_remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__post_remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__post_remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__post_remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__post_remove_distdir)
-
-dist dist-all:
- $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
- $(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lz*) \
- lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod u+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__post_remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @test -n '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: trying to run $@ with an empty' \
- '$$(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- $(am__cd) '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
- cscopelist-recursive ctags-recursive install-am \
- install-data-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-cscope \
- clean-generic cscope cscopelist cscopelist-recursive ctags \
- ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
- dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
- distclean distclean-generic distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-data install-data-am \
- install-data-hook install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
-
-
-rpm: dist
- $(MAKE) -C $@
-
-dist-hook:
- -chmod -R a+r $(distdir)
- @if ! test -z "$(AMTAR)"; then \
- $(AMTAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
- else \
- $(TAR) --create --verbose --file=- $(distdir) | bzip2 -c -9 > $(distdir).tar.bz2 ; \
- fi
-
-install-data-hook:
- $(MKDIR_P) -m 0755 $(DESTDIR)$(ASOUND_STATE_DIR)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/NOTICE b/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index 2d6f36a..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,1409 +0,0 @@
-# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-dnl Configure Paths for Alsa
-dnl Some modifications by Richard Boulton <richard-alsa@tartarus.org>
-dnl Christopher Lansdown <lansdoct@cs.alfred.edu>
-dnl Jaroslav Kysela <perex@perex.cz>
-dnl Last modification: $Id: alsa.m4,v 1.24 2004/09/15 18:48:07 tiwai Exp $
-dnl AM_PATH_ALSA([MINIMUM-VERSION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for libasound, and define ALSA_CFLAGS and ALSA_LIBS as appropriate.
-dnl enables arguments --with-alsa-prefix=
-dnl --with-alsa-enc-prefix=
-dnl --disable-alsatest
-dnl
-dnl For backwards compatibility, if ACTION_IF_NOT_FOUND is not specified,
-dnl and the alsa libraries are not found, a fatal AC_MSG_ERROR() will result.
-dnl
-AC_DEFUN([AM_PATH_ALSA],
-[dnl Save the original CFLAGS, LDFLAGS, and LIBS
-alsa_save_CFLAGS="$CFLAGS"
-alsa_save_LDFLAGS="$LDFLAGS"
-alsa_save_LIBS="$LIBS"
-alsa_found=yes
-
-dnl
-dnl Get the cflags and libraries for alsa
-dnl
-AC_ARG_WITH(alsa-prefix,
-[ --with-alsa-prefix=PFX Prefix where Alsa library is installed(optional)],
-[alsa_prefix="$withval"], [alsa_prefix=""])
-
-AC_ARG_WITH(alsa-inc-prefix,
-[ --with-alsa-inc-prefix=PFX Prefix where include libraries are (optional)],
-[alsa_inc_prefix="$withval"], [alsa_inc_prefix=""])
-
-dnl FIXME: this is not yet implemented
-AC_ARG_ENABLE(alsatest,
-[ --disable-alsatest Do not try to compile and run a test Alsa program],
-[enable_alsatest="$enableval"],
-[enable_alsatest=yes])
-
-dnl Add any special include directories
-AC_MSG_CHECKING(for ALSA CFLAGS)
-if test "$alsa_inc_prefix" != "" ; then
- ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix"
- CFLAGS="$CFLAGS -I$alsa_inc_prefix"
-fi
-AC_MSG_RESULT($ALSA_CFLAGS)
-
-dnl add any special lib dirs
-AC_MSG_CHECKING(for ALSA LDFLAGS)
-if test "$alsa_prefix" != "" ; then
- ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix"
- LDFLAGS="$LDFLAGS $ALSA_LIBS"
-fi
-
-dnl add the alsa library
-ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl -lpthread"
-LIBS="$ALSA_LIBS $LIBS"
-AC_MSG_RESULT($ALSA_LIBS)
-
-dnl Check for a working version of libasound that is of the right version.
-if test "x$enable_alsatest" = "xyes"; then
-min_alsa_version=ifelse([$1], ,0.1.1,$1)
-AC_MSG_CHECKING(for libasound headers version >= $min_alsa_version)
-no_alsa=""
- alsa_min_major_version=`echo $min_alsa_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- alsa_min_minor_version=`echo $min_alsa_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- alsa_min_micro_version=`echo $min_alsa_version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
-AC_LANG_SAVE
-AC_LANG_C
-AC_TRY_COMPILE([
-#include <alsa/asoundlib.h>
-], [
-/* ensure backward compatibility */
-#if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
-#define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
-#endif
-#if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
-#define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
-#endif
-#if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
-#define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
-#endif
-
-# if(SND_LIB_MAJOR > $alsa_min_major_version)
- exit(0);
-# else
-# if(SND_LIB_MAJOR < $alsa_min_major_version)
-# error not present
-# endif
-
-# if(SND_LIB_MINOR > $alsa_min_minor_version)
- exit(0);
-# else
-# if(SND_LIB_MINOR < $alsa_min_minor_version)
-# error not present
-# endif
-
-# if(SND_LIB_SUBMINOR < $alsa_min_micro_version)
-# error not present
-# endif
-# endif
-# endif
-exit(0);
-],
- [AC_MSG_RESULT(found.)],
- [AC_MSG_RESULT(not present.)
- ifelse([$3], , [AC_MSG_ERROR(Sufficiently new version of libasound not found.)])
- alsa_found=no]
-)
-AC_LANG_RESTORE
-fi
-
-dnl Now that we know that we have the right version, let's see if we have the library and not just the headers.
-if test "x$enable_alsatest" = "xyes"; then
-AC_CHECK_LIB([asound], [snd_ctl_open],,
- [ifelse([$3], , [AC_MSG_ERROR(No linkable libasound was found.)])
- alsa_found=no]
-)
-fi
-
-if test "x$alsa_found" = "xyes" ; then
- ifelse([$2], , :, [$2])
- LIBS=`echo $LIBS | sed 's/-lasound//g'`
- LIBS=`echo $LIBS | sed 's/ //'`
- LIBS="-lasound $LIBS"
-fi
-if test "x$alsa_found" = "xno" ; then
- ifelse([$3], , :, [$3])
- CFLAGS="$alsa_save_CFLAGS"
- LDFLAGS="$alsa_save_LDFLAGS"
- LIBS="$alsa_save_LIBS"
- ALSA_CFLAGS=""
- ALSA_LIBS=""
-fi
-
-dnl That should be it. Now just export out symbols:
-AC_SUBST(ALSA_CFLAGS)
-AC_SUBST(ALSA_LIBS)
-])
-
-
-# intlmacosx.m4 serial 3 (gettext-0.18)
-dnl Copyright (C) 2004-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Checks for special options needed on MacOS X.
-dnl Defines INTL_MACOSX_LIBS.
-AC_DEFUN([gt_INTL_MACOSX],
-[
- dnl Check for API introduced in MacOS X 10.2.
- AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
- [gt_cv_func_CFPreferencesCopyAppValue],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
- [CFPreferencesCopyAppValue(NULL, NULL)],
- [gt_cv_func_CFPreferencesCopyAppValue=yes],
- [gt_cv_func_CFPreferencesCopyAppValue=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
- AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
- [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
- fi
- dnl Check for API introduced in MacOS X 10.3.
- AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
- [gt_cv_func_CFLocaleCopyCurrent=yes],
- [gt_cv_func_CFLocaleCopyCurrent=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
- [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
- AC_SUBST([INTL_MACOSX_LIBS])
-])
-
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-#
-# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
-AC_DEFUN([PKG_PROG_PKG_CONFIG],
-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=m4_default([$1], [0.9.0])
- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- PKG_CONFIG=""
- fi
-fi[]dnl
-])# PKG_PROG_PKG_CONFIG
-
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_EXISTS],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-if test -n "$PKG_CONFIG" && \
- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
- m4_default([$2], [:])
-m4_ifvaln([$3], [else
- $3])dnl
-fi])
-
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
-m4_define([_PKG_CONFIG],
-[if test -n "$$1"; then
- pkg_cv_[]$1="$$1"
- elif test -n "$PKG_CONFIG"; then
- PKG_CHECK_EXISTS([$3],
- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
- [pkg_failed=yes])
- else
- pkg_failed=untried
-fi[]dnl
-])# _PKG_CONFIG
-
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
-
-
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
-AC_DEFUN([PKG_CHECK_MODULES],
-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-
-pkg_failed=no
-AC_MSG_CHECKING([for $1])
-
-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-
-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-and $1[]_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.])
-
-if test $pkg_failed = yes; then
- AC_MSG_RESULT([no])
- _PKG_SHORT_ERRORS_SUPPORTED
- if test $_pkg_short_errors_supported = yes; then
- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
- else
- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-
- m4_default([$4], [AC_MSG_ERROR(
-[Package requirements ($2) were not met:
-
-$$1_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-_PKG_TEXT])
- ])
-elif test $pkg_failed = untried; then
- AC_MSG_RESULT([no])
- m4_default([$4], [AC_MSG_FAILURE(
-[The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-_PKG_TEXT
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
- ])
-else
- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
- AC_MSG_RESULT([yes])
- $3
-fi[]dnl
-])# PKG_CHECK_MODULES
-
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.12'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.12.2], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.12.2])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 17
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
- [$1], [CXX], [depcc="$CXX" am_compiler_list=],
- [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
- [$1], [UPC], [depcc="$UPC" am_compiler_list=],
- [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
- [--enable-dependency-tracking],
- [do not reject slow dependency extractors])
-AS_HELP_STRING(
- [--disable-dependency-tracking],
- [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 19
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
-[$0: two- and three-arguments forms are deprecated. For more info, see:
-http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
- m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
- [ok:ok],,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES([CC])],
- [m4_define([AC_PROG_CC],
- m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES([CXX])],
- [m4_define([AC_PROG_CXX],
- m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES([OBJC])],
- [m4_define([AC_PROG_OBJC],
- m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-dnl Support for Objective C++ was only introduced in Autoconf 2.65,
-dnl but we still cater to Autoconf 2.62.
-m4_ifdef([AC_PROG_OBJCXX],
-[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
- [_AM_DEPENDENCIES([OBJCXX])],
- [m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless 'enable' is passed literally.
-# For symmetry, 'disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
- [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
- am_maintainer_other[ make rules and dependencies not useful
- (and sometimes confusing) to the casual installer])],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for 'mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl FIXME to be removed in Automake 1.13.
-AC_DIAGNOSE([obsolete],
-[$0: this macro is deprecated, and will soon be removed.
-You should use the Autoconf-provided 'AC][_PROG_MKDIR_P' macro instead,
-and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.])
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
- alias in your environment])
- fi
- if test "$[2]" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
- [AC_MSG_CHECKING([that generated files are newer than configure])
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/gettext.m4])
-m4_include([m4/iconv.m4])
-m4_include([m4/lib-ld.m4])
-m4_include([m4/lib-link.m4])
-m4_include([m4/lib-prefix.m4])
-m4_include([m4/nls.m4])
-m4_include([m4/po.m4])
-m4_include([m4/progtest.m4])
-m4_include([acinclude.m4])
diff --git a/alsaconf/Makefile.in b/alsaconf/Makefile.in
deleted file mode 100644
index fafabbf..0000000
--- a/alsaconf/Makefile.in
+++ /dev/null
@@ -1,719 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = alsaconf
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/alsaconf.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES = alsaconf
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
-SCRIPTS = $(sbin_SCRIPTS)
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-sbin_SCRIPTS = alsaconf
-man_MANS = alsaconf.8 alsaconf.fr.8
-EXTRA_DIST = $(man_MANS)
-SUBDIRS = po
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaconf/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign alsaconf/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-alsaconf: $(top_builddir)/config.status $(srcdir)/alsaconf.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-sbinSCRIPTS: $(sbin_SCRIPTS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n' \
- -e 'h;s|.*|.|' \
- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) { files[d] = files[d] " " $$1; \
- if (++n[d] == $(am__install_max)) { \
- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
- else { print "f", d "/" $$4, $$1 } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 's,.*/,,;$(transform)'`; \
- dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(SCRIPTS) $(MANS)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-sbinSCRIPTS
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man8
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinSCRIPTS
-
-uninstall-man: uninstall-man8
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
- cscopelist-recursive ctags-recursive install-am install-strip \
- tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic cscopelist \
- cscopelist-recursive ctags ctags-recursive distclean \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man8 install-pdf \
- install-pdf-am install-ps install-ps-am install-sbinSCRIPTS \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am uninstall-man \
- uninstall-man8 uninstall-sbinSCRIPTS
-
-
-install-man8:
- @for i in $(man_MANS); do \
- ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
- inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
- case $$inst in \
- *.[a-za-z]*)\
- loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
- loc="/$$loc"; \
- inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
- *)\
- loc="";; \
- esac; \
- $(mkinstalldirs) $(DESTDIR)$(mandir)$$loc/man$$ext; \
- echo " $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
- $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
- done
-
-uninstall-man8:
- @for i in $(man_MANS); do \
- ext=`echo $$i | $(SED) -e 's/^.*\\.//'`; \
- inst=`echo $$i | $(SED) -e 's/\\.[^.]*$$//'`; \
- case $$inst in \
- *.[a-za-z]*)\
- loc=`echo $$inst | $(SED) -e 's/^.*\\.//'`; \
- loc="/$$loc"; \
- inst=`echo $$inst | $(SED) -e 's/\\.[^.]*$$//'`;; \
- *)\
- loc="";; \
- esac; \
- echo " rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext"; \
- rm -f $(DESTDIR)$(mandir)$$loc/man$$ext/$$inst.$$ext; \
- done
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsactl/.gitignore b/alsactl/.gitignore
new file mode 100644
index 0000000..56ab3a2
--- /dev/null
+++ b/alsactl/.gitignore
@@ -0,0 +1,3 @@
+alsa-store.service
+alsa-restore.service
+90-alsa-restore.rules
diff --git a/alsactl/90-alsa-restore.rules.in b/alsactl/90-alsa-restore.rules.in
index 88e12e0..0bcee5b 100644
--- a/alsactl/90-alsa-restore.rules.in
+++ b/alsactl/90-alsa-restore.rules.in
@@ -1,8 +1,2 @@
-ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS!="card*", GOTO="alsa_restore_go"
-GOTO="alsa_restore_end"
-
-LABEL="alsa_restore_go"
-TEST!="@daemonswitch@", RUN+="@sbindir@/alsactl restore $attr{number}"
-TEST=="@daemonswitch@", RUN+="@sbindir@/alsactl nrestore $attr{number}"
-
-LABEL="alsa_restore_end"
+ACTION=="add", SUBSYSTEM=="sound", KERNEL=="controlC*", KERNELS=="card*", \
+ RUN+="@sbindir@/alsactl restore $attr{number}"
diff --git a/alsactl/Android.mk b/alsactl/Android.mk
deleted file mode 100644
index 7a16ccd..0000000
--- a/alsactl/Android.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := alsactl
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := alsactl.c \
- daemon.c \
- init_parse.c \
- lock.c \
- state.c \
- utils.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/alsactl/Makefile.am b/alsactl/Makefile.am
index bac84eb..c434e44 100644
--- a/alsactl/Makefile.am
+++ b/alsactl/Makefile.am
@@ -7,28 +7,26 @@
endif
EXTRA_DIST=alsactl.1 alsactl_init.xml
-alsactl_SOURCES=alsactl.c state.c lock.c utils.c init_parse.c daemon.c
-alsactl_CFLAGS=$(AM_CFLAGS) -D__USE_GNU -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" -DSYS_PIDFILE=\"$(ALSACTL_PIDFILE_DIR)/alsactl.pid\"
+alsactl_SOURCES=alsactl.c state.c utils.c init_parse.c
+alsactl_CFLAGS=$(AM_CFLAGS) -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\"
noinst_HEADERS=alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
-udevrules_DATA = \
+dist_udevrules_DATA = \
90-alsa-restore.rules
if HAVE_SYSTEMD
systemdsystemunit_DATA = \
- alsa-state.service \
- alsa-restore.service \
- alsa-store.service
+ alsa-store.service \
+ alsa-restore.service
install-data-hook:
$(MKDIR_P) -m 0755 \
$(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \
$(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants
( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \
- rm -f alsa-state.service alsa-restore.service && \
- $(LN_S) ../alsa-state.service alsa-state.service && \
- $(LN_S) ../alsa-restore.service alsa-restore.service)
+ rm -f alsa-restore.service && \
+ $(LN_S) ../alsa-restore.service alsa-restore.service )
( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \
rm -f alsa-store.service && \
$(LN_S) ../alsa-store.service alsa-store.service )
@@ -36,32 +34,25 @@
endif
edit = \
- $(SED) -r -e 's,@sbindir\@,$(sbindir),g' \
- -e 's,@daemonswitch\@,$(ALSACTL_DAEMONSWITCH),g' \
- < $< > $@ || rm $@
+ $(SED) -r 's,@sbindir\@,$(sbindir),g' < $< > $@ || rm $@
-alsa-state.service: alsa-state.service.in
+alsa-store.service: alsa-store.service.in
$(edit)
alsa-restore.service: alsa-restore.service.in
$(edit)
-alsa-store.service: alsa-store.service.in
- $(edit)
-
90-alsa-restore.rules: 90-alsa-restore.rules.in
$(edit)
EXTRA_DIST += \
- alsa-state.service.in \
- alsa-restore.service.in \
alsa-store.service.in \
+ alsa-restore.service.in \
90-alsa-restore.rules.in
CLEANFILES = \
- alsa-state.service \
- alsa-restore.service \
alsa-store.service \
+ alsa-restore.service \
90-alsa-restore.rules
%.7: %.xml
diff --git a/alsactl/Makefile.in b/alsactl/Makefile.in
deleted file mode 100644
index 73f442a..0000000
--- a/alsactl/Makefile.in
+++ /dev/null
@@ -1,1018 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-sbin_PROGRAMS = alsactl$(EXEEXT)
-@USE_XMLTO_TRUE@am__append_1 = alsactl_init.7
-subdir = alsactl
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
- "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(systemdsystemunitdir)" \
- "$(DESTDIR)$(udevrulesdir)"
-PROGRAMS = $(sbin_PROGRAMS)
-am_alsactl_OBJECTS = alsactl-alsactl.$(OBJEXT) alsactl-state.$(OBJEXT) \
- alsactl-lock.$(OBJEXT) alsactl-utils.$(OBJEXT) \
- alsactl-init_parse.$(OBJEXT) alsactl-daemon.$(OBJEXT)
-alsactl_OBJECTS = $(am_alsactl_OBJECTS)
-alsactl_LDADD = $(LDADD)
-alsactl_LINK = $(CCLD) $(alsactl_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
- $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsactl_SOURCES)
-DIST_SOURCES = $(alsactl_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-man7dir = $(mandir)/man7
-NROFF = nroff
-MANS = $(man_MANS)
-DATA = $(systemdsystemunit_DATA) $(udevrules_DATA)
-HEADERS = $(noinst_HEADERS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-SUBDIRS = init
-man_MANS = alsactl.1 $(am__append_1)
-EXTRA_DIST = alsactl.1 alsactl_init.xml alsa-state.service.in \
- alsa-restore.service.in alsa-store.service.in \
- 90-alsa-restore.rules.in
-alsactl_SOURCES = alsactl.c state.c lock.c utils.c init_parse.c daemon.c
-alsactl_CFLAGS = $(AM_CFLAGS) -D__USE_GNU -DSYS_ASOUNDRC=\"$(ASOUND_STATE_DIR)/asound.state\" -DSYS_PIDFILE=\"$(ALSACTL_PIDFILE_DIR)/alsactl.pid\"
-noinst_HEADERS = alsactl.h list.h init_sysdeps.c init_utils_string.c init_utils_run.c init_sysfs.c
-udevrules_DATA = \
- 90-alsa-restore.rules
-
-@HAVE_SYSTEMD_TRUE@systemdsystemunit_DATA = \
-@HAVE_SYSTEMD_TRUE@ alsa-state.service \
-@HAVE_SYSTEMD_TRUE@ alsa-restore.service \
-@HAVE_SYSTEMD_TRUE@ alsa-store.service
-
-edit = \
- $(SED) -r -e 's,@sbindir\@,$(sbindir),g' \
- -e 's,@daemonswitch\@,$(ALSACTL_DAEMONSWITCH),g' \
- < $< > $@ || rm $@
-
-CLEANFILES = \
- alsa-state.service \
- alsa-restore.service \
- alsa-store.service \
- 90-alsa-restore.rules
-
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsactl/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign alsactl/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-sbinPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(sbindir)" && rm -f $$files
-
-clean-sbinPROGRAMS:
- -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-alsactl$(EXEEXT): $(alsactl_OBJECTS) $(alsactl_DEPENDENCIES) $(EXTRA_alsactl_DEPENDENCIES)
- @rm -f alsactl$(EXEEXT)
- $(alsactl_LINK) $(alsactl_OBJECTS) $(alsactl_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-alsactl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-daemon.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-init_parse.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-lock.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-state.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsactl-utils.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-alsactl-alsactl.o: alsactl.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-alsactl.o -MD -MP -MF $(DEPDIR)/alsactl-alsactl.Tpo -c -o alsactl-alsactl.o `test -f 'alsactl.c' || echo '$(srcdir)/'`alsactl.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-alsactl.Tpo $(DEPDIR)/alsactl-alsactl.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='alsactl.c' object='alsactl-alsactl.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-alsactl.o `test -f 'alsactl.c' || echo '$(srcdir)/'`alsactl.c
-
-alsactl-alsactl.obj: alsactl.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-alsactl.obj -MD -MP -MF $(DEPDIR)/alsactl-alsactl.Tpo -c -o alsactl-alsactl.obj `if test -f 'alsactl.c'; then $(CYGPATH_W) 'alsactl.c'; else $(CYGPATH_W) '$(srcdir)/alsactl.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-alsactl.Tpo $(DEPDIR)/alsactl-alsactl.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='alsactl.c' object='alsactl-alsactl.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-alsactl.obj `if test -f 'alsactl.c'; then $(CYGPATH_W) 'alsactl.c'; else $(CYGPATH_W) '$(srcdir)/alsactl.c'; fi`
-
-alsactl-state.o: state.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-state.o -MD -MP -MF $(DEPDIR)/alsactl-state.Tpo -c -o alsactl-state.o `test -f 'state.c' || echo '$(srcdir)/'`state.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-state.Tpo $(DEPDIR)/alsactl-state.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='state.c' object='alsactl-state.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-state.o `test -f 'state.c' || echo '$(srcdir)/'`state.c
-
-alsactl-state.obj: state.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-state.obj -MD -MP -MF $(DEPDIR)/alsactl-state.Tpo -c -o alsactl-state.obj `if test -f 'state.c'; then $(CYGPATH_W) 'state.c'; else $(CYGPATH_W) '$(srcdir)/state.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-state.Tpo $(DEPDIR)/alsactl-state.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='state.c' object='alsactl-state.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-state.obj `if test -f 'state.c'; then $(CYGPATH_W) 'state.c'; else $(CYGPATH_W) '$(srcdir)/state.c'; fi`
-
-alsactl-lock.o: lock.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-lock.o -MD -MP -MF $(DEPDIR)/alsactl-lock.Tpo -c -o alsactl-lock.o `test -f 'lock.c' || echo '$(srcdir)/'`lock.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-lock.Tpo $(DEPDIR)/alsactl-lock.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lock.c' object='alsactl-lock.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-lock.o `test -f 'lock.c' || echo '$(srcdir)/'`lock.c
-
-alsactl-lock.obj: lock.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-lock.obj -MD -MP -MF $(DEPDIR)/alsactl-lock.Tpo -c -o alsactl-lock.obj `if test -f 'lock.c'; then $(CYGPATH_W) 'lock.c'; else $(CYGPATH_W) '$(srcdir)/lock.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-lock.Tpo $(DEPDIR)/alsactl-lock.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lock.c' object='alsactl-lock.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-lock.obj `if test -f 'lock.c'; then $(CYGPATH_W) 'lock.c'; else $(CYGPATH_W) '$(srcdir)/lock.c'; fi`
-
-alsactl-utils.o: utils.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-utils.o -MD -MP -MF $(DEPDIR)/alsactl-utils.Tpo -c -o alsactl-utils.o `test -f 'utils.c' || echo '$(srcdir)/'`utils.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-utils.Tpo $(DEPDIR)/alsactl-utils.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='utils.c' object='alsactl-utils.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-utils.o `test -f 'utils.c' || echo '$(srcdir)/'`utils.c
-
-alsactl-utils.obj: utils.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-utils.obj -MD -MP -MF $(DEPDIR)/alsactl-utils.Tpo -c -o alsactl-utils.obj `if test -f 'utils.c'; then $(CYGPATH_W) 'utils.c'; else $(CYGPATH_W) '$(srcdir)/utils.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-utils.Tpo $(DEPDIR)/alsactl-utils.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='utils.c' object='alsactl-utils.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-utils.obj `if test -f 'utils.c'; then $(CYGPATH_W) 'utils.c'; else $(CYGPATH_W) '$(srcdir)/utils.c'; fi`
-
-alsactl-init_parse.o: init_parse.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-init_parse.o -MD -MP -MF $(DEPDIR)/alsactl-init_parse.Tpo -c -o alsactl-init_parse.o `test -f 'init_parse.c' || echo '$(srcdir)/'`init_parse.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-init_parse.Tpo $(DEPDIR)/alsactl-init_parse.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='init_parse.c' object='alsactl-init_parse.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-init_parse.o `test -f 'init_parse.c' || echo '$(srcdir)/'`init_parse.c
-
-alsactl-init_parse.obj: init_parse.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-init_parse.obj -MD -MP -MF $(DEPDIR)/alsactl-init_parse.Tpo -c -o alsactl-init_parse.obj `if test -f 'init_parse.c'; then $(CYGPATH_W) 'init_parse.c'; else $(CYGPATH_W) '$(srcdir)/init_parse.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-init_parse.Tpo $(DEPDIR)/alsactl-init_parse.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='init_parse.c' object='alsactl-init_parse.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-init_parse.obj `if test -f 'init_parse.c'; then $(CYGPATH_W) 'init_parse.c'; else $(CYGPATH_W) '$(srcdir)/init_parse.c'; fi`
-
-alsactl-daemon.o: daemon.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-daemon.o -MD -MP -MF $(DEPDIR)/alsactl-daemon.Tpo -c -o alsactl-daemon.o `test -f 'daemon.c' || echo '$(srcdir)/'`daemon.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-daemon.Tpo $(DEPDIR)/alsactl-daemon.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='daemon.c' object='alsactl-daemon.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-daemon.o `test -f 'daemon.c' || echo '$(srcdir)/'`daemon.c
-
-alsactl-daemon.obj: daemon.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -MT alsactl-daemon.obj -MD -MP -MF $(DEPDIR)/alsactl-daemon.Tpo -c -o alsactl-daemon.obj `if test -f 'daemon.c'; then $(CYGPATH_W) 'daemon.c'; else $(CYGPATH_W) '$(srcdir)/daemon.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/alsactl-daemon.Tpo $(DEPDIR)/alsactl-daemon.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='daemon.c' object='alsactl-daemon.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(alsactl_CFLAGS) $(CFLAGS) -c -o alsactl-daemon.obj `if test -f 'daemon.c'; then $(CYGPATH_W) 'daemon.c'; else $(CYGPATH_W) '$(srcdir)/daemon.c'; fi`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-install-man7: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man7dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.7[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
- done; }
-
-uninstall-man7:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man7dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.7[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
-install-systemdsystemunitDATA: $(systemdsystemunit_DATA)
- @$(NORMAL_INSTALL)
- @list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(systemdsystemunitdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(systemdsystemunitdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systemdsystemunitdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(systemdsystemunitdir)" || exit $$?; \
- done
-
-uninstall-systemdsystemunitDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(systemdsystemunitdir)'; $(am__uninstall_files_from_dir)
-install-udevrulesDATA: $(udevrules_DATA)
- @$(NORMAL_INSTALL)
- @list='$(udevrules_DATA)'; test -n "$(udevrulesdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(udevrulesdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(udevrulesdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(udevrulesdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(udevrulesdir)" || exit $$?; \
- done
-
-uninstall-udevrulesDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(udevrules_DATA)'; test -n "$(udevrulesdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(udevrulesdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(systemdsystemunitdir)" "$(DESTDIR)$(udevrulesdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-@HAVE_SYSTEMD_FALSE@install-data-hook:
-clean: clean-recursive
-
-clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man install-systemdsystemunitDATA \
- install-udevrulesDATA
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-sbinPROGRAMS
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man1 install-man7
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-man uninstall-sbinPROGRAMS \
- uninstall-systemdsystemunitDATA uninstall-udevrulesDATA
-
-uninstall-man: uninstall-man1 uninstall-man7
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
- cscopelist-recursive ctags-recursive install-am \
- install-data-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic \
- clean-sbinPROGRAMS cscopelist cscopelist-recursive ctags \
- ctags-recursive distclean distclean-compile distclean-generic \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am \
- install-data-hook install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man1 install-man7 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-sbinPROGRAMS install-strip \
- install-systemdsystemunitDATA install-udevrulesDATA \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am uninstall-man \
- uninstall-man1 uninstall-man7 uninstall-sbinPROGRAMS \
- uninstall-systemdsystemunitDATA uninstall-udevrulesDATA
-
-
-@HAVE_SYSTEMD_TRUE@install-data-hook:
-@HAVE_SYSTEMD_TRUE@ $(MKDIR_P) -m 0755 \
-@HAVE_SYSTEMD_TRUE@ $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants \
-@HAVE_SYSTEMD_TRUE@ $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants
-@HAVE_SYSTEMD_TRUE@ ( cd $(DESTDIR)$(systemdsystemunitdir)/basic.target.wants && \
-@HAVE_SYSTEMD_TRUE@ rm -f alsa-state.service alsa-restore.service && \
-@HAVE_SYSTEMD_TRUE@ $(LN_S) ../alsa-state.service alsa-state.service && \
-@HAVE_SYSTEMD_TRUE@ $(LN_S) ../alsa-restore.service alsa-restore.service)
-@HAVE_SYSTEMD_TRUE@ ( cd $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants && \
-@HAVE_SYSTEMD_TRUE@ rm -f alsa-store.service && \
-@HAVE_SYSTEMD_TRUE@ $(LN_S) ../alsa-store.service alsa-store.service )
-
-alsa-state.service: alsa-state.service.in
- $(edit)
-
-alsa-restore.service: alsa-restore.service.in
- $(edit)
-
-alsa-store.service: alsa-store.service.in
- $(edit)
-
-90-alsa-restore.rules: 90-alsa-restore.rules.in
- $(edit)
-
-%.7: %.xml
- xmlto man $?
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsactl/NOTICE b/alsactl/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/alsactl/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/alsactl/alsa-restore.service.in b/alsactl/alsa-restore.service.in
index 245a439..e97d196 100644
--- a/alsactl/alsa-restore.service.in
+++ b/alsactl/alsa-restore.service.in
@@ -1,13 +1,7 @@
-#
-# Note that two different ALSA card state management schemes exist and they
-# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
-#
-
[Unit]
Description=Restore Sound Card State
-ConditionPathExists=!@daemonswitch@
DefaultDependencies=no
-After=alsa-state.service
+After=sysinit.target
Before=shutdown.target
Conflicts=shutdown.target
diff --git a/alsactl/alsa-state.service.in b/alsactl/alsa-state.service.in
deleted file mode 100644
index 768c5a8..0000000
--- a/alsactl/alsa-state.service.in
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Note that two different ALSA card state management schemes exist and they
-# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
-#
-
-[Unit]
-Description=Manage Sound Card State (restore and store)
-ConditionPathExists=@daemonswitch@
-DefaultDependencies=no
-After=sysinit.target
-Before=shutdown.target
-Conflicts=shutdown.target
-
-[Service]
-Type=simple
-ExecStart=-@sbindir@/alsactl -s -n 19 -c rdaemon
-ExecStop=-@sbindir@/alsactl -s rkill save_and_quit
diff --git a/alsactl/alsa-store.service.in b/alsactl/alsa-store.service.in
index f1a56bb..0e2823c 100644
--- a/alsactl/alsa-store.service.in
+++ b/alsactl/alsa-store.service.in
@@ -1,11 +1,5 @@
-#
-# Note that two different ALSA card state management schemes exist and they
-# can be switched using a file exist check - /etc/alsa/state-daemon.conf .
-#
-
[Unit]
Description=Store Sound Card State
-ConditionPathExists=!@daemonswitch@
DefaultDependencies=no
Before=shutdown.target
diff --git a/alsactl/alsactl.1 b/alsactl/alsactl.1
index 45ac8a6..eb5968c 100644
--- a/alsactl/alsactl.1
+++ b/alsactl/alsactl.1
@@ -1,4 +1,4 @@
-.TH ALSACTL 1 "05 Apr 2013"
+.TH ALSACTL 1 "15 May 2001"
.SH NAME
alsactl \- advanced controls for ALSA soundcard driver
@@ -21,19 +21,9 @@
configuration file. If restoring fails (eventually partly), the init
action is called.
-\fInrestore\fP is like \fIrestore\fP, but it notifies also the daemon
-to do new rescan for available soundcards.
-
\fIinit\fP tries to initialize all devices to a default state. If device
is not known, error code 99 is returned.
-\fIdaemon\fP manages to save periodically the sound state.
-
-\fIrdaemon\fP like \fIdaemon\fP but restore the sound state at first.
-
-\fIkill\fP notifies the daemon to do the specified operation (quit,
-rescan, save_and_quit).
-
If no soundcards are specified, setup for all cards will be saved or
loaded.
@@ -95,34 +85,10 @@
useful for "boot" scripts).
.TP
-\fI\-i, \-\-initfile\fP
+\fI\-i, \-\-initfile\fP #=#
The configuration file for init. By default, PREFIX/share/alsa/init/00main
is used.
-.TP
-\fI\-p, \-\-period\fP
-The store period in seconds for the daemon command.
-
-.TP
-\fI\-e, \-\-pid-file\fP
-The pathname to store the process-id file in the HDB UUCP format (ASCII).
-
-.TP
-\fI\-b, \-\-background\fP
-Run the task in background.
-
-.TP
-\fI\-s, \-\-syslog\fP
-Use syslog for messages.
-
-.TP
-\fI\-n, \-\-nice\fP
-Set the process priority (see 'man nice')
-
-.TP
-\fI\-c, \-\-sched-idle\fP
-Set the process scheduling policy to idle (SCHED_IDLE).
-
.SH FILES
\fI/var/lib/alsa/asound.state\fP (or whatever file you specify with the
\fB\-f\fP flag) is used to store current settings for your
@@ -141,8 +107,7 @@
\fB
amixer(1),
alsamixer(1),
-aplay(1),
-alsactl_init(7)
+aplay(1)
\fP
.SH BUGS
diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c
index 75baad8..1792747 100644
--- a/alsactl/alsactl.c
+++ b/alsactl/alsactl.c
@@ -27,143 +27,67 @@
#include <stdio.h>
#include <assert.h>
#include <errno.h>
-#include <syslog.h>
-#include <sched.h>
#include <alsa/asoundlib.h>
#include "alsactl.h"
#ifndef SYS_ASOUNDRC
#define SYS_ASOUNDRC "/var/lib/alsa/asound.state"
#endif
-#ifndef SYS_PIDFILE
-#define SYS_PIDFILE "/var/run/alsactl.pid"
-#endif
int debugflag = 0;
int force_restore = 1;
int ignore_nocards = 0;
-int do_lock = 0;
-int use_syslog = 0;
char *command;
char *statefile = NULL;
-#define TITLE 0x0100
-#define HEADER 0x0200
-#define FILEARG 0x0400
-#define ENVARG 0x0800
-#define INTARG 0x1000
-#define EMPCMD 0x2000
-#define CARDCMD 0x4000
-#define KILLCMD 0x8000
-
-struct arg {
- int sarg;
- char *larg;
- char *comment;
-};
-
-static struct arg args[] = {
-{ TITLE, NULL, "Usage: alsactl <options> command" },
-{ HEADER, NULL, "global options:" },
-{ 'h', "help", "this help" },
-{ 'd', "debug", "debug mode" },
-{ 'v', "version", "print version of this program" },
-{ HEADER, NULL, "Available state options:" },
-{ FILEARG | 'f', "file", "configuration file (default " SYS_ASOUNDRC ")" },
-{ 'l', "lock", "use file locking to serialize concurrent access" },
-{ 'F', "force", "try to restore the matching controls as much as possible" },
-{ 0, NULL, " (default mode)" },
-{ 'g', "ignore", "ignore 'No soundcards found' error" },
-{ 'P', "pedantic", "do not restore mismatching controls (old default)" },
-{ 'I', "no-init-fallback", "" },
-{ 0, NULL, "don't initialize even if restore fails" },
-{ FILEARG | 'r', "runstate", "save restore and init state to this file (only errors)" },
-{ 0, NULL, " default settings is 'no file set'" },
-{ 'R', "remove", "remove runstate file at first, otherwise append errors" },
-{ INTARG | 'p', "period", "store period in seconds for the daemon command" },
-{ FILEARG | 'e', "pid-file", "pathname for the process id (daemon mode)" },
-{ HEADER, NULL, "Available init options:" },
-{ ENVARG | 'E', "env", "set environment variable for init phase (NAME=VALUE)" },
-{ FILEARG | 'i', "initfile", "main configuation file for init phase" },
-{ 0, NULL, " (default " DATADIR "/init/00main)" },
-{ 'b', "background", "run daemon in background" },
-{ 's', "syslog", "use syslog for messages" },
-{ INTARG | 'n', "nice", "set the process priority (see 'man nice')" },
-{ 'c', "sched-idle", "set the process scheduling policy to idle (SCHED_IDLE)" },
-{ HEADER, NULL, "Available commands:" },
-{ CARDCMD, "store", "save current driver setup for one or each soundcards" },
-{ EMPCMD, NULL, " to configuration file" },
-{ CARDCMD, "restore", "load current driver setup for one or each soundcards" },
-{ EMPCMD, NULL, " from configuration file" },
-{ CARDCMD, "nrestore", "like restore, but notify the daemon to rescan soundcards" },
-{ CARDCMD, "init", "initialize driver to a default state" },
-{ CARDCMD, "daemon", "store state periodically for one or each soundcards" },
-{ CARDCMD, "rdaemon", "like daemon but do the state restore at first" },
-{ KILLCMD, "kill", "notify daemon to quit, rescan or save_and_quit" },
-{ 0, NULL, NULL }
-};
-
static void help(void)
{
- struct arg *n = args, *a;
- char *larg, sa[4], buf[32];
- int sarg;
-
- sa[0] = '-';
- sa[2] = ',';
- sa[3] = '\0';
- while (n->comment) {
- a = n;
- n++;
- sarg = a->sarg;
- if (sarg & (HEADER|TITLE)) {
- printf("%s%s\n", (sarg & HEADER) != 0 ? "\n" : "",
- a->comment);
- continue;
- }
- buf[0] = '\0';
- larg = a->larg;
- if (sarg & (EMPCMD|CARDCMD|KILLCMD)) {
- if (sarg & CARDCMD)
- strcat(buf, "<card>");
- else if (sarg & KILLCMD)
- strcat(buf, "<cmd>");
- printf(" %-8s %-6s %s\n", larg ? larg : "",
- buf, a->comment);
- continue;
- }
- sa[1] = a->sarg;
- sprintf(buf, "%s%s%s", sa[1] ? sa : "",
- larg ? "--" : "", larg ? larg : "");
- if (sarg & ENVARG)
- strcat(buf, " #=#");
- else if (sarg & (FILEARG|INTARG))
- strcat(buf, " #");
- printf(" %-15s %s\n", buf, a->comment);
- }
-}
-
-#define NO_NICE (-100000)
-
-static void do_nice(int use_nice, int sched_idle)
-{
- struct sched_param sched_param;
-
- if (use_nice != NO_NICE && nice(use_nice) < 0)
- error("nice(%i): %s", use_nice, strerror(errno));
- if (sched_idle) {
- if (sched_getparam(0, &sched_param) >= 0) {
- sched_param.sched_priority = 0;
- if (!sched_setscheduler(0, SCHED_RR, &sched_param))
- error("sched_setparam failed: %s", strerror(errno));
- } else {
- error("sched_getparam failed: %s", strerror(errno));
- }
- }
+ printf("Usage: alsactl <options> command\n");
+ printf("\nAvailable global options:\n");
+ printf(" -h,--help this help\n");
+ printf(" -d,--debug debug mode\n");
+ printf(" -v,--version print version of this program\n");
+ printf("\nAvailable state options:\n");
+ printf(" -f,--file # configuration file (default " SYS_ASOUNDRC ")\n");
+ printf(" -F,--force try to restore the matching controls as much as possible\n");
+ printf(" (default mode)\n");
+ printf(" -g,--ignore ignore 'No soundcards found' error\n");
+ printf(" -P,--pedantic do not restore mismatching controls (old default)\n");
+ printf(" -I,--no-init-fallback\n"
+ " don't initialize even if restore fails\n");
+ printf(" -r,--runstate # save restore and init state to this file (only errors)\n");
+ printf(" default settings is 'no file set'\n");
+ printf(" -R,--remove remove runstate file at first, otherwise append errors\n");
+ printf("\nAvailable init options:\n");
+ printf(" -E,--env #=# set environment variable for init phase (NAME=VALUE)\n");
+ printf(" -i,--initfile # main configuation file for init phase (default " DATADIR "/init/00main)\n");
+ printf("\n");
+ printf("\nAvailable commands:\n");
+ printf(" store <card #> save current driver setup for one or each soundcards\n");
+ printf(" to configuration file\n");
+ printf(" restore <card #> load current driver setup for one or each soundcards\n");
+ printf(" from configuration file\n");
+ printf(" init <card #> initialize driver to a default state\n");
}
int main(int argc, char *argv[])
{
+ static const struct option long_option[] =
+ {
+ {"help", 0, NULL, 'h'},
+ {"file", 1, NULL, 'f'},
+ {"env", 1, NULL, 'E'},
+ {"initfile", 1, NULL, 'i'},
+ {"no-init-fallback", 0, NULL, 'I'},
+ {"force", 0, NULL, 'F'},
+ {"ignore", 0, NULL, 'g'},
+ {"pedantic", 0, NULL, 'P'},
+ {"runstate", 0, NULL, 'r'},
+ {"remove", 0, NULL, 'R'},
+ {"debug", 0, NULL, 'd'},
+ {"version", 0, NULL, 'v'},
+ {NULL, 0, NULL, 0},
+ };
static const char *const devfiles[] = {
"/dev/snd/controlC",
"/dev/snd/pcmC",
@@ -173,64 +97,25 @@
};
char *cfgfile = SYS_ASOUNDRC;
char *initfile = DATADIR "/init/00main";
- char *pidfile = SYS_PIDFILE;
char *cardname, ncardname[16];
- char *cmd;
const char *const *tmp;
int removestate = 0;
int init_fallback = 1; /* new default behavior */
- int period = 5*60;
- int background = 0;
- int daemoncmd = 0;
- int use_nice = NO_NICE;
- int sched_idle = 0;
- struct arg *a;
- struct option *o;
- int i, j, k, res;
- struct option *long_option;
- char *short_option;
+ int res;
- long_option = calloc(ARRAY_SIZE(args), sizeof(struct option));
- if (long_option == NULL)
- exit(EXIT_FAILURE);
- short_option = malloc(128);
- if (short_option == NULL) {
- free(long_option);
- exit(EXIT_FAILURE);
- }
- for (i = j = k = 0; i < ARRAY_SIZE(args); i++) {
- a = &args[i];
- if ((a->sarg & 0xff) == 0)
- continue;
- o = &long_option[j];
- o->name = a->larg;
- o->has_arg = (a->sarg & (ENVARG|FILEARG|INTARG)) != 0;
- o->flag = NULL;
- o->val = a->sarg & 0xff;
- j++;
- short_option[k++] = o->val;
- if (o->has_arg)
- short_option[k++] = ':';
- }
- short_option[k] = '\0';
command = argv[0];
while (1) {
int c;
- if ((c = getopt_long(argc, argv, short_option, long_option,
- NULL)) < 0)
+ if ((c = getopt_long(argc, argv, "hdvf:FgE:i:IPr:R", long_option, NULL)) < 0)
break;
switch (c) {
case 'h':
help();
- res = EXIT_SUCCESS;
- goto out;
+ return EXIT_SUCCESS;
case 'f':
cfgfile = optarg;
break;
- case 'l':
- do_lock = 1;
- break;
case 'F':
force_restore = 1;
break;
@@ -240,8 +125,7 @@
case 'E':
if (putenv(optarg)) {
fprintf(stderr, "environment string '%s' is wrong\n", optarg);
- res = EXIT_FAILURE;
- goto out;
+ return EXIT_FAILURE;
}
break;
case 'i':
@@ -259,56 +143,24 @@
case 'P':
force_restore = 0;
break;
- case 'p':
- period = atoi(optarg);
- if (period < 10)
- period = 5*60;
- else if (period > 24*60*60)
- period = 24*60*60;
- break;
- case 'e':
- pidfile = optarg;
- break;
- case 'b':
- background = 1;
- break;
- case 's':
- use_syslog = 1;
- break;
- case 'n':
- use_nice = atoi(optarg);
- if (use_nice < -20)
- use_nice = -20;
- else if (use_nice > 19)
- use_nice = 19;
- break;
- case 'c':
- sched_idle = 1;
- break;
case 'd':
debugflag = 1;
break;
case 'v':
printf("alsactl version " SND_UTIL_VERSION_STR "\n");
- res = EXIT_SUCCESS;
- goto out;
+ return EXIT_SUCCESS;
case '?': // error msg already printed
help();
- res = EXIT_FAILURE;
- goto out;
+ return EXIT_FAILURE;
+ break;
default: // should never happen
fprintf(stderr,
"Invalid option '%c' (%d) not handled??\n", c, c);
}
}
- free(short_option);
- short_option = NULL;
- free(long_option);
- long_option = NULL;
if (argc - optind <= 0) {
fprintf(stderr, "alsactl: Specify command...\n");
- res = 0;
- goto out;
+ return 0;
}
cardname = argc - optind > 1 ? argv[optind + 1] : NULL;
@@ -322,62 +174,20 @@
}
}
- /* the global system file should be always locked */
- if (strcmp(cfgfile, SYS_ASOUNDRC) == 0)
- do_lock = 1;
-
- /* when running in background, use syslog for reports */
- if (background) {
- use_syslog = 1;
- daemon(0, 0);
- }
-
- cmd = argv[optind];
- daemoncmd = strcmp(cmd, "daemon") == 0 || strcmp(cmd, "rdaemon") == 0;
-
- if (use_syslog) {
- openlog("alsactl", LOG_CONS|LOG_PID, LOG_DAEMON);
- if (daemoncmd)
- syslog(LOG_INFO, "alsactl " SND_UTIL_VERSION_STR " daemon started");
- }
-
- if (!strcmp(cmd, "init")) {
+ if (!strcmp(argv[optind], "init")) {
res = init(initfile, cardname);
- snd_config_update_free_global();
- } else if (!strcmp(cmd, "store")) {
+ } else if (!strcmp(argv[optind], "store")) {
res = save_state(cfgfile, cardname);
- } else if (!strcmp(cmd, "restore") ||
- !strcmp(cmd, "rdaemon") ||
- !strcmp(cmd, "nrestore")) {
+ } else if (!strcmp(argv[optind], "restore")) {
if (removestate)
remove(statefile);
res = load_state(cfgfile, initfile, cardname, init_fallback);
- if (!strcmp(cmd, "rdaemon")) {
- do_nice(use_nice, sched_idle);
- res = state_daemon(cfgfile, cardname, period, pidfile);
- }
- if (!strcmp(cmd, "nrestore"))
- res = state_daemon_kill(pidfile, "rescan");
- } else if (!strcmp(cmd, "daemon")) {
- do_nice(use_nice, sched_idle);
- res = state_daemon(cfgfile, cardname, period, pidfile);
- } else if (!strcmp(cmd, "kill")) {
- res = state_daemon_kill(pidfile, cardname);
} else {
- fprintf(stderr, "alsactl: Unknown command '%s'...\n", cmd);
+ fprintf(stderr, "alsactl: Unknown command '%s'...\n",
+ argv[optind]);
res = -ENODEV;
}
snd_config_update_free_global();
- if (use_syslog) {
- if (daemoncmd)
- syslog(LOG_INFO, "alsactl daemon stopped");
- closelog();
- }
return res < 0 ? -res : 0;
-
-out:
- free(short_option);
- free(long_option);
- return res;
}
diff --git a/alsactl/alsactl.h b/alsactl/alsactl.h
index 9109a70..be90efb 100644
--- a/alsactl/alsactl.h
+++ b/alsactl/alsactl.h
@@ -1,37 +1,77 @@
extern int debugflag;
extern int force_restore;
extern int ignore_nocards;
-extern int do_lock;
-extern int use_syslog;
extern char *command;
extern char *statefile;
-void info_(const char *fcn, long line, const char *fmt, ...);
-void error_(const char *fcn, long line, const char *fmt, ...);
-void cerror_(const char *fcn, long line, int cond, const char *fmt, ...);
-void dbg_(const char *fcn, long line, const char *fmt, ...);
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define info(...) do {\
+ fprintf(stdout, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stdout, __VA_ARGS__); \
+ putc('\n', stdout); \
+} while (0)
+#else
+#define info(args...) do {\
+ fprintf(stdout, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stdout, ##args); \
+ putc('\n', stdout); \
+} while (0)
+#endif
#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
-#define info(...) do { info_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
-#define error(...) do { error_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
-#define cerror(cond, ...) do { cerror_(__FUNCTION__, __LINE__, (cond) != 0, __VA_ARGS__); } while (0)
-#define dbg(...) do { dbg_(__FUNCTION__, __LINE__, __VA_ARGS__); } while (0)
+#define error(...) do {\
+ fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, __VA_ARGS__); \
+ putc('\n', stderr); \
+} while (0)
#else
-#define info(args...) do { info_(__FUNCTION__, __LINE__, ##args); } while (0)
-#define error(args...) do { error_(__FUNCTION__, __LINE__, ##args); } while (0)
-#define cerror(cond, ...) do { error_(__FUNCTION__, __LINE__, (cond) != 0, ##args); } while (0)
-#define dbg(args...) do { dbg_(__FUNCTION__, __LINE__, ##args); } while (0)
+#define error(args...) do {\
+ fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, ##args); \
+ putc('\n', stderr); \
+} while (0)
+#endif
+
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define cerror(cond, ...) do {\
+ if (cond || debugflag) { \
+ fprintf(stderr, "%s%s: %s:%d: ", debugflag ? "WARNING: " : "", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, __VA_ARGS__); \
+ putc('\n', stderr); \
+ } \
+} while (0)
+#else
+#define cerror(cond, args...) do {\
+ if (cond || debugflag) { \
+ fprintf(stderr, "%s%s: %s:%d: ", debugflag ? "WARNING: " : "", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, ##args); \
+ putc('\n', stderr); \
+ } \
+} while (0)
+#endif
+
+#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
+#define dbg(...) do {\
+ if (!debugflag) break; \
+ fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, __VA_ARGS__); \
+ putc('\n', stderr); \
+} while (0)
+#else
+#define dbg(args...) do {\
+ if (!debugflag) break; \
+ fprintf(stderr, "%s: %s:%d: ", command, __FUNCTION__, __LINE__); \
+ fprintf(stderr, ##args); \
+ putc('\n', stderr); \
+} while (0)
#endif
int init(const char *file, const char *cardname);
-int state_lock(const char *file, int lock, int timeout);
int save_state(const char *file, const char *cardname);
int load_state(const char *file, const char *initfile, const char *cardname,
int do_init);
int power(const char *argv[], int argc);
-int state_daemon(const char *file, const char *cardname, int period,
- const char *pidfile);
-int state_daemon_kill(const char *pidfile, const char *cmd);
+int generate_names(const char *cfgfile);
/* utils */
@@ -52,5 +92,3 @@
return -1;
return c;
}
-
-#define ARRAY_SIZE(a) (sizeof (a) / sizeof (a)[0])
diff --git a/alsactl/alsactl_init.xml b/alsactl/alsactl_init.xml
index bce26f5..eefe9ef 100644
--- a/alsactl/alsactl_init.xml
+++ b/alsactl/alsactl_init.xml
@@ -474,15 +474,7 @@
<varlistentry>
<term><option>INCLUDE</option></term>
<listitem>
- <para>Include the specified filename or files in specified directory.
- </para>
- <para>
- When a directory is specified, only the files with the
- extension ".conf" are read.
- Also they are read in the alphabetical order.
- Thus it's highly recommended to use some number prefix
- (e.g. "01-something.conf") to assure the order of execucions.
- </para>
+ <para>Include specified filename or all files in specified directory</para>
</listitem>
</varlistentry>
diff --git a/alsactl/daemon.c b/alsactl/daemon.c
deleted file mode 100644
index 127701e..0000000
--- a/alsactl/daemon.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- * Advanced Linux Sound Architecture Control Program
- * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include "aconfig.h"
-#include "version.h"
-#include <getopt.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <assert.h>
-#include <errno.h>
-#include <signal.h>
-#include <time.h>
-#include <poll.h>
-#include <alsa/asoundlib.h>
-#include "alsactl.h"
-
-struct id_list {
- snd_ctl_elem_id_t **list;
- int size;
-};
-
-struct card {
- int index;
- int pfds;
- snd_ctl_t *handle;
- struct id_list whitelist;
- struct id_list blacklist;
-};
-
-static int quit = 0;
-static int rescan = 0;
-static int save_now = 0;
-
-static void signal_handler_quit(int sig)
-{
- quit = 1;
- signal(sig, signal_handler_quit);
-}
-
-static void signal_handler_save_and_quit(int sig)
-{
- quit = save_now = 1;
- signal(sig, signal_handler_quit);
-}
-
-static void signal_handler_rescan(int sig)
-{
- rescan = 1;
- signal(sig, signal_handler_rescan);
-}
-
-static void free_list(struct id_list *list)
-{
- int i;
-
- for (i = 0; i < list->size; i++)
- free(list->list[i]);
- free(list->list);
-}
-
-static void card_free(struct card **card)
-{
- struct card *c = *card;
-
- free_list(&c->blacklist);
- free_list(&c->whitelist);
- if (c->handle)
- snd_ctl_close(c->handle);
- free(c);
- *card = NULL;
-}
-
-static void add_card(struct card ***cards, int *count, const char *cardname)
-{
- struct card *card, **cc;
- int i, index, findex;
- char device[16];
-
- index = snd_card_get_index(cardname);
- if (index < 0)
- return;
- for (i = 0, findex = -1; i < *count; i++) {
- if ((*cards)[i] == NULL) {
- findex = i;
- } else {
- if ((*cards)[i]->index == index)
- return;
- }
- }
- card = calloc(1, sizeof(*card));
- if (card == NULL)
- return;
- card->index = index;
- sprintf(device, "hw:%i", index);
- if (snd_ctl_open(&card->handle, device, SND_CTL_READONLY|SND_CTL_NONBLOCK) < 0) {
- card_free(&card);
- return;
- }
- card->pfds = snd_ctl_poll_descriptors_count(card->handle);
- if (card->pfds < 0) {
- card_free(&card);
- return;
- }
- if (snd_ctl_subscribe_events(card->handle, 1) < 0) {
- card_free(&card);
- return;
- }
- if (findex >= 0) {
- (*cards)[findex] = card;
- } else {
- cc = realloc(*cards, sizeof(void *) * (*count + 1));
- if (cc == NULL) {
- card_free(&card);
- return;
- }
- cc[*count] = card;
- *count = *count + 1;
- *cards = cc;
- }
-}
-
-static void add_cards(struct card ***cards, int *count)
-{
- int card = -1;
- char cardname[16];
-
- while (1) {
- if (snd_card_next(&card) < 0)
- break;
- if (card < 0)
- break;
- if (card >= 0) {
- sprintf(cardname, "%i", card);
- add_card(cards, count, cardname);
- }
- }
-}
-
-static int compare_ids(snd_ctl_elem_id_t *id1, snd_ctl_elem_id_t *id2)
-{
- if (id1 == NULL || id2 == NULL)
- return 0;
- return snd_ctl_elem_id_get_interface(id1) == snd_ctl_elem_id_get_interface(id2) &&
- snd_ctl_elem_id_get_index(id1) == snd_ctl_elem_id_get_index(id2) &&
- strcmp(snd_ctl_elem_id_get_name(id1), snd_ctl_elem_id_get_name(id2)) == 0 &&
- snd_ctl_elem_id_get_device(id1) == snd_ctl_elem_id_get_device(id2) &&
- snd_ctl_elem_id_get_subdevice(id1) == snd_ctl_elem_id_get_subdevice(id2);
-}
-
-static int in_list(struct id_list *list, snd_ctl_elem_id_t *id)
-{
- int i;
- snd_ctl_elem_id_t *id1;
-
- for (i = 0; i < list->size; i++) {
- id1 = list->list[i];
- if (id1 == NULL)
- continue;
- if (compare_ids(id, id1))
- return 1;
- }
- return 0;
-}
-
-static void remove_from_list(struct id_list *list, snd_ctl_elem_id_t *id)
-{
- int i;
-
- for (i = 0; i < list->size; i++) {
- if (compare_ids(id, list->list[i])) {
- free(list->list[i]);
- list->list[i] = NULL;
- }
- }
-}
-
-static void add_to_list(struct id_list *list, snd_ctl_elem_id_t *id)
-{
- snd_ctl_elem_id_t *id1;
- snd_ctl_elem_id_t **n;
- int i;
-
- if (snd_ctl_elem_id_malloc(&id1))
- return;
- snd_ctl_elem_id_copy(id1, id);
- for (i = 0; i < list->size; i++) {
- if (list->list[i] == NULL) {
- list->list[i] = id1;
- return;
- }
- }
- n = realloc(list->list, sizeof(void *) * (list->size + 1));
- if (n == NULL)
- return;
- n[list->size] = id1;
- list->size++;
- list->list = n;
-}
-
-static int check_lists(struct card *card, snd_ctl_elem_id_t *id)
-{
- snd_ctl_elem_info_t *info;
- snd_ctl_elem_info_alloca(&info);
-
- if (in_list(&card->blacklist, id))
- return 0;
- if (in_list(&card->whitelist, id))
- return 1;
- snd_ctl_elem_info_set_id(info, id);
- if (snd_ctl_elem_info(card->handle, info) < 0)
- return 0;
- if (snd_ctl_elem_info_is_writable(info) ||
- snd_ctl_elem_info_is_tlv_writable(info)) {
- add_to_list(&card->whitelist, id);
- return 1;
- } else {
- add_to_list(&card->blacklist, id);
- return 0;
- }
-}
-
-static int card_events(struct card *card)
-{
- int res = 0;
- snd_ctl_event_t *ev;
- snd_ctl_event_type_t type;
- unsigned int mask;
- snd_ctl_elem_id_t *id;
- snd_ctl_event_alloca(&ev);
- snd_ctl_elem_id_alloca(&id);
-
- while (snd_ctl_read(card->handle, ev) == 1) {
- type = snd_ctl_event_get_type(ev);
- if (type != SND_CTL_EVENT_ELEM)
- continue;
- mask = snd_ctl_event_elem_get_mask(ev);
- snd_ctl_event_elem_get_id(ev, id);
- if (mask == SND_CTL_EVENT_MASK_REMOVE) {
- remove_from_list(&card->whitelist, id);
- remove_from_list(&card->blacklist, id);
- continue;
- }
- if (mask & SND_CTL_EVENT_MASK_INFO) {
- remove_from_list(&card->whitelist, id);
- remove_from_list(&card->blacklist, id);
- }
- if (mask & (SND_CTL_EVENT_MASK_VALUE|
- SND_CTL_EVENT_MASK_ADD|
- SND_CTL_EVENT_MASK_TLV)) {
- if (check_lists(card, id))
- res = 1;
- }
- }
- return res;
-}
-
-static long read_pid_file(const char *pidfile)
-{
- int fd, err;
- char pid_txt[12];
-
- fd = open(pidfile, O_RDONLY);
- if (fd >= 0) {
- err = read(fd, pid_txt, 11);
- if (err != 11)
- err = err < 0 ? -errno : -EIO;
- close(fd);
- pid_txt[11] = '\0';
- return atol(pid_txt);
- } else {
- return -errno;
- }
-}
-
-static int write_pid_file(const char *pidfile)
-{
- int fd, err;
- char pid_txt[12];
-
- sprintf(pid_txt, "%10li\n", (long)getpid());
- fd = open(pidfile, O_WRONLY|O_CREAT|O_EXCL, 0600);
- if (fd >= 0) {
- err = write(fd, pid_txt, 11);
- if (err != 11) {
- err = err < 0 ? -errno : -EIO;
- unlink(pidfile);
- } else {
- err = 0;
- }
- close(fd);
- } else {
- err = -errno;
- }
- return err;
-}
-
-int state_daemon_kill(const char *pidfile, const char *cmd)
-{
- long pid;
- int sig = SIGHUP;
-
- if (cmd == NULL) {
- error("Specify kill command (quit, rescan or save_and_quit)");
- return -EINVAL;
- }
- if (strcmp(cmd, "rescan") == 0)
- sig = SIGUSR1;
- else if (strcmp(cmd, "save_and_quit") == 0)
- sig = SIGUSR2;
- else if (strcmp(cmd, "quit") == 0)
- sig = SIGTERM;
- if (sig == SIGHUP) {
- error("Unknown kill command '%s'", cmd);
- return -EINVAL;
- }
- pid = read_pid_file(pidfile);
- if (pid > 0) {
- if (kill(pid, sig) >= 0)
- return 0;
- return -errno;
- }
- return 0;
-}
-
-static int check_another_instance(const char *pidfile)
-{
- long pid;
-
- pid = read_pid_file(pidfile);
- if (pid >= 0) {
- /* invoke new card rescan */
- if (kill(pid, SIGUSR1) >= 0) {
- usleep(1000);
- pid = read_pid_file(pidfile);
- if (pid >= 0)
- return 1;
- }
- }
- return 0;
-}
-
-int state_daemon(const char *file, const char *cardname, int period,
- const char *pidfile)
-{
- int count = 0, pcount, psize = 0, i, j, k, changed = 0;
- time_t last_write, now;
- unsigned short revents;
- struct card **cards = NULL;
- struct pollfd *pfd = NULL, *pfdn;
-
- if (check_another_instance(pidfile))
- return 0;
- rescan = 1;
- signal(SIGABRT, signal_handler_quit);
- signal(SIGTERM, signal_handler_quit);
- signal(SIGINT, signal_handler_quit);
- signal(SIGUSR1, signal_handler_rescan);
- signal(SIGUSR2, signal_handler_save_and_quit);
- write_pid_file(pidfile);
- time(&last_write);
- while (!quit || save_now) {
- if (save_now)
- goto save;
- if (rescan) {
- if (cardname) {
- add_card(&cards, &count, cardname);
- } else {
- add_cards(&cards, &count);
- }
- snd_config_update_free_global();
- rescan = 0;
- }
- for (i = pcount = 0; i < count; i++) {
- if (cards[i] == NULL)
- continue;
- pcount += cards[i]->pfds;
- }
- if (pcount > psize) {
- pfdn = realloc(pfd, sizeof(struct pollfd) * pcount);
- if (pfdn) {
- psize = pcount;
- pfd = pfdn;
- } else {
- error("No enough memory...");
- goto out;
- }
- }
- for (i = j = 0; i < count; i++) {
- if (cards[i] == NULL)
- continue;
- k = snd_ctl_poll_descriptors(cards[i]->handle, pfd + j, pcount - j);
- if (k != cards[i]->pfds) {
- error("poll prepare failed: %i", k);
- goto out;
- }
- j += k;
- }
- i = poll(pfd, j, (period / 2) * 1000);
- if (i < 0 && errno == EINTR)
- continue;
- if (i < 0) {
- error("poll failed: %s", strerror(errno));
- break;
- }
- time(&now);
- for (i = j = 0; i < count; i++) {
- if (cards[i] == NULL)
- continue;
- k = snd_ctl_poll_descriptors_revents(cards[i]->handle,
- pfd + j, cards[i]->pfds, &revents);
- if (k < 0) {
- error("poll post failed: %i\n", k);
- goto out;
- }
- j += cards[i]->pfds;
- if (revents & (POLLERR|POLLNVAL)) {
- card_free(&cards[i]);
- } else if (revents & POLLIN) {
- if (card_events(cards[i])) {
- /* delay the write */
- if (!changed)
- last_write = now;
- changed = 1;
- }
- }
- }
- if ((now - last_write >= period && changed) || save_now) {
-save:
- changed = save_now = 0;
- save_state(file, cardname);
- }
- }
-out:
- free(pfd);
- remove(pidfile);
- for (i = 0; i < count; i++)
- card_free(&cards[i]);
- free(cards);
- return 0;
-}
diff --git a/alsactl/init/Makefile.am b/alsactl/init/Makefile.am
index 64dac41..9e2b83d 100644
--- a/alsactl/init/Makefile.am
+++ b/alsactl/init/Makefile.am
@@ -1,7 +1,7 @@
init_files = \
00main default help info test \
- hda ca0106
+ hda
EXTRA_DIST = $(init_files)
alsainitdir = $(datadir)/alsa/init
alsainit_DATA = $(init_files)
diff --git a/alsactl/init/Makefile.in b/alsactl/init/Makefile.in
deleted file mode 100644
index 7488c2a..0000000
--- a/alsactl/init/Makefile.in
+++ /dev/null
@@ -1,464 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = alsactl/init
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(alsainitdir)"
-DATA = $(alsainit_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-init_files = \
- 00main default help info test \
- hda ca0106
-
-EXTRA_DIST = $(init_files)
-alsainitdir = $(datadir)/alsa/init
-alsainit_DATA = $(init_files)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsactl/init/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign alsactl/init/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-alsainitDATA: $(alsainit_DATA)
- @$(NORMAL_INSTALL)
- @list='$(alsainit_DATA)'; test -n "$(alsainitdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(alsainitdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(alsainitdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(alsainitdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(alsainitdir)" || exit $$?; \
- done
-
-uninstall-alsainitDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(alsainit_DATA)'; test -n "$(alsainitdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(alsainitdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(alsainitdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-alsainitDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-alsainitDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-alsainitDATA install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-alsainitDATA uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsactl/init_parse.c b/alsactl/init_parse.c
index 8a7173b..51b515c 100644
--- a/alsactl/init_parse.c
+++ b/alsactl/init_parse.c
@@ -1278,13 +1278,6 @@
return res;
}
-/* return non-zero if the file name has the extension ".conf" */
-static int conf_name_filter(const struct dirent *d)
-{
- char *ext = strrchr(d->d_name, '.');
- return ext && !strcmp(ext, ".conf");
-}
-
static int parse_line(struct space *space, char *line, size_t linesize)
{
char *linepos;
@@ -1487,7 +1480,8 @@
if (strcasecmp(key, "INCLUDE") == 0) {
char *rootdir, *go_to;
const char *filename;
- struct stat st;
+ struct dirent *dirent;
+ DIR *dir;
int linenum;
if (op != KEY_OP_ASSIGN) {
Perror(space, "invalid INCLUDE operation");
@@ -1504,27 +1498,18 @@
go_to = space->go_to;
filename = space->filename;
linenum = space->linenum;
- if (stat(string, &st)) {
- Perror(space, "invalid filename '%s'", string);
- continue;
- }
- if (S_ISDIR(st.st_mode)) {
- struct dirent **list;
- int i, num;
- num = scandir(string, &list, conf_name_filter,
- alphasort);
- if (num < 0) {
- Perror(space, "invalid directory '%s'", string);
- continue;
- }
+ dir = opendir(string);
+ if (dir) {
count = strlen(string);
- for (i = 0; i < num; i++) {
+ while ((dirent = readdir(dir)) != NULL) {
+ if (strcmp(dirent->d_name, ".") == 0 ||
+ strcmp(dirent->d_name, "..") == 0)
+ continue;
string[count] = '\0';
strlcat(string, "/", sizeof(string));
- strlcat(string, list[i]->d_name, sizeof(string));
+ strlcat(string, dirent->d_name, sizeof(string));
space->go_to = NULL;
space->rootdir = new_root_dir(string);
- free(list[i]);
if (space->rootdir) {
err = parse(space, string);
free(space->rootdir);
@@ -1537,7 +1522,7 @@
if (err)
break;
}
- free(list);
+ closedir(dir);
} else {
space->go_to = NULL;
space->rootdir = new_root_dir(string);
diff --git a/alsactl/lock.c b/alsactl/lock.c
deleted file mode 100644
index 587a109..0000000
--- a/alsactl/lock.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Advanced Linux Sound Architecture Control Program
- * Copyright (c) by Jaroslav Kysela <perex@perex.cz>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include "aconfig.h"
-#include "version.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <string.h>
-#include <sys/stat.h>
-#include "alsactl.h"
-
-static int state_lock_(const char *file, int lock, int timeout)
-{
- int fd = -1, err = 0;
- struct flock lck;
- struct stat st;
- char lcktxt[12];
- char *nfile;
-
- if (!do_lock)
- return 0;
- nfile = malloc(strlen(file) + 6);
- if (nfile == NULL) {
- error("No enough memory...");
- return -ENOMEM;
- }
- strcpy(nfile, file);
- strcat(nfile, ".lock");
- lck.l_type = lock ? F_WRLCK : F_UNLCK;
- lck.l_whence = SEEK_SET;
- lck.l_start = 0;
- lck.l_len = 11;
- lck.l_pid = 0;
- if (lock) {
- snprintf(lcktxt, sizeof(lcktxt), "%10li\n", (long)getpid());
- } else {
- snprintf(lcktxt, sizeof(lcktxt), "%10s\n", "");
- }
- while (fd < 0 && timeout-- > 0) {
- fd = open(nfile, O_RDWR);
- if (fd < 0) {
- fd = open(nfile, O_RDWR|O_CREAT|O_EXCL, 0644);
- if (fd < 0) {
- if (errno == EBUSY || errno == EAGAIN) {
- sleep(1);
- timeout--;
- } else {
- err = -errno;
- goto out;
- }
- }
- }
- }
- if (fd < 0 && timeout <= 0) {
- err = -EBUSY;
- goto out;
- }
- if (fstat(fd, &st) < 0) {
- err = -errno;
- goto out;
- }
- if (st.st_size != 11) {
- if (write(fd, lcktxt, 11) != 11) {
- err = -EIO;
- goto out;
- }
- if (lseek(fd, 0, SEEK_SET)) {
- err = -errno;
- goto out;
- }
- }
- while (timeout > 0) {
- if (fcntl(fd, F_SETLK, &lck) < 0) {
- sleep(1);
- timeout--;
- } else {
- break;
- }
- }
- if (timeout <= 0) {
- err = -EBUSY;
- goto out;
- }
- if (write(fd, lcktxt, 11) != 11) {
- err = -EIO;
- goto out;
- }
-out:
- free(nfile);
- return err;
-}
-
-int state_lock(const char *file, int lock, int timeout)
-{
- int err;
-
- err = state_lock_(file, lock, timeout);
- if (err < 0)
- error("file %s %slock error: %s", file,
- lock ? "" : "un", strerror(-err));
- return err;
-}
diff --git a/alsactl/state.c b/alsactl/state.c
index c33f501..a8b5bd3 100644
--- a/alsactl/state.c
+++ b/alsactl/state.c
@@ -31,6 +31,9 @@
#include "alsactl.h"
+#define ARRAY_SIZE(a) (sizeof (a) / sizeof (a)[0])
+
+
static char *id_str(snd_ctl_elem_id_t *id)
{
static char str[128];
@@ -182,11 +185,11 @@
char *s = tlv_to_str(tlv);
if (s) {
err = snd_config_string_add(comment, "tlv", s);
- free(s);
if (err < 0) {
error("snd_config_string_add: %s", snd_strerror(err));
return err;
}
+ free(s);
}
}
@@ -1543,7 +1546,6 @@
snd_input_t *in;
snd_output_t *out;
int stdio;
- char *nfile = NULL;
err = snd_config_top(&config);
if (err < 0) {
@@ -1551,24 +1553,13 @@
return err;
}
stdio = !strcmp(file, "-");
- if (!stdio) {
- nfile = malloc(strlen(file) + 5);
- if (nfile == NULL) {
- error("No enough memory...");
- goto out;
- }
- strcpy(nfile, file);
- strcat(nfile, ".new");
- if (state_lock(file, 1, 10) != 0)
- goto out;
- }
if (!stdio && (err = snd_input_stdio_open(&in, file, "r")) >= 0) {
err = snd_config_load(config, in);
snd_input_close(in);
#if 0
if (err < 0) {
error("snd_config_load error: %s", snd_strerror(err));
- goto out;
+ return err;
}
#endif
}
@@ -1584,19 +1575,17 @@
if (card < 0) {
if (first) {
if (ignore_nocards) {
- err = 0;
- goto out;
+ return 0;
} else {
error("No soundcards found...");
- err = -ENODEV;
- goto out;
+ return -ENODEV;
}
}
break;
}
first = 0;
if ((err = get_controls(card, config)))
- goto out;
+ return err;
}
} else {
int cardno;
@@ -1604,40 +1593,26 @@
cardno = snd_card_get_index(cardname);
if (cardno < 0) {
error("Cannot find soundcard '%s'...", cardname);
- err = cardno;
- goto out;
+ return cardno;
}
if ((err = get_controls(cardno, config))) {
- goto out;
+ return err;
}
}
- if (stdio) {
+ if (stdio)
err = snd_output_stdio_attach(&out, stdout, 0);
- } else {
- err = snd_output_stdio_open(&out, nfile, "w");
- }
+ else
+ err = snd_output_stdio_open(&out, file, "w");
if (err < 0) {
error("Cannot open %s for writing: %s", file, snd_strerror(err));
- err = -errno;
- goto out;
+ return -errno;
}
err = snd_config_save(config, out);
snd_output_close(out);
- if (err < 0) {
+ if (err < 0)
error("snd_config_save: %s", snd_strerror(err));
- } else {
- err = rename(nfile, file);
- if (err < 0)
- error("rename failed: %s (%s)", strerror(-err), file);
- }
-out:
- if (!stdio)
- state_lock(file, 0, 10);
- free(nfile);
- snd_config_delete(config);
- snd_config_update_free_global();
- return err;
+ return 0;
}
int load_state(const char *file, const char *initfile, const char *cardname,
@@ -1646,7 +1621,7 @@
int err, finalerr = 0;
snd_config_t *config;
snd_input_t *in;
- int stdio, locked = 0;
+ int stdio;
err = snd_config_top(&config);
if (err < 0) {
@@ -1654,21 +1629,16 @@
return err;
}
stdio = !strcmp(file, "-");
- if (stdio) {
+ if (stdio)
err = snd_input_stdio_attach(&in, stdin, 0);
- } else {
- err = state_lock(file, 1, 10);
- locked = err >= 0;
- err = err >= 0 ? snd_input_stdio_open(&in, file, "r") : err;
- }
+ else
+ err = snd_input_stdio_open(&in, file, "r");
if (err >= 0) {
err = snd_config_load(config, in);
snd_input_close(in);
- if (locked)
- state_lock(file, 0, 10);
if (err < 0) {
error("snd_config_load error: %s", snd_strerror(err));
- goto out;
+ return err;
}
} else {
int card, first = 1;
@@ -1676,24 +1646,13 @@
error("Cannot open %s for reading: %s", file, snd_strerror(err));
finalerr = err;
- if (cardname) {
- card = snd_card_get_index(cardname);
- if (card < 0) {
- error("Cannot find soundcard '%s'...", cardname);
- err = -ENODEV;
- goto out;
- }
- goto single;
- } else {
- card = -1;
- }
+ card = -1;
/* find each installed soundcards */
- while (!cardname) {
+ while (1) {
if (snd_card_next(&card) < 0)
break;
if (card < 0)
break;
-single:
first = 0;
if (!do_init)
break;
@@ -1707,8 +1666,7 @@
}
if (first)
finalerr = 0; /* no cards, no error code */
- err = finalerr;
- goto out;
+ return finalerr;
}
if (!cardname) {
@@ -1723,12 +1681,10 @@
if (card < 0) {
if (first) {
if (ignore_nocards) {
- err = 0;
- goto out;
+ return 0;
} else {
error("No soundcards found...");
- err = -ENODEV;
- goto out;
+ return -ENODEV;
}
}
break;
@@ -1755,8 +1711,7 @@
cardno = snd_card_get_index(cardname);
if (cardno < 0) {
error("Cannot find soundcard '%s'...", cardname);
- err = -ENODEV;
- goto out;
+ return -ENODEV;
}
/* do a check if controls matches state file */
if (do_init && set_controls(cardno, config, 0)) {
@@ -1769,12 +1724,8 @@
if ((err = set_controls(cardno, config, 1))) {
initfailed(cardno, "restore", err);
if (!force_restore)
- goto out;
+ return err;
}
}
- err = finalerr;
-out:
- snd_config_delete(config);
- snd_config_update_free_global();
- return err;
+ return finalerr;
}
diff --git a/alsactl/utils.c b/alsactl/utils.c
index 072c239..a27eb6e 100644
--- a/alsactl/utils.c
+++ b/alsactl/utils.c
@@ -27,7 +27,6 @@
#include <errno.h>
#include <ctype.h>
#include <dirent.h>
-#include <syslog.h>
#include <sys/stat.h>
#include <sys/mman.h>
@@ -101,79 +100,3 @@
close(fp);
free(str);
}
-
-static void syslog_(int prio, const char *fcn, long line,
- const char *fmt, va_list ap)
-{
- char buf[1024];
-
- snprintf(buf, sizeof(buf), "%s: %s:%ld", command, fcn, line);
- buf[sizeof(buf)-1] = '\0';
- vsnprintf(buf + strlen(buf), sizeof(buf)-strlen(buf), fmt, ap);
- buf[sizeof(buf)-1] = '\0';
- syslog(LOG_INFO, "%s", buf);
-}
-
-void info_(const char *fcn, long line, const char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- if (use_syslog) {
- syslog_(LOG_INFO, fcn, line, fmt, ap);
- } else {
- fprintf(stdout, "%s: %s:%ld: ", command, fcn, line);
- vfprintf(stdout, fmt, ap);
- putc('\n', stdout);
- }
- va_end(ap);
-}
-
-void error_(const char *fcn, long line, const char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- if (use_syslog) {
- syslog_(LOG_ERR, fcn, line, fmt, ap);
- } else {
- fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
- vfprintf(stderr, fmt, ap);
- putc('\n', stderr);
- }
- va_end(ap);
-}
-
-void cerror_(const char *fcn, long line, int cond, const char *fmt, ...)
-{
- va_list ap;
-
- if (!cond && !debugflag)
- return;
- if (use_syslog) {
- syslog_(LOG_ERR, fcn, line, fmt, ap);
- } else {
- va_start(ap, fmt);
- fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
- vfprintf(stderr, fmt, ap);
- putc('\n', stderr);
- va_end(ap);
- }
-}
-
-void dbg_(const char *fcn, long line, const char *fmt, ...)
-{
- va_list ap;
-
- if (!debugflag)
- return;
- if (use_syslog) {
- syslog_(LOG_DEBUG, fcn, line, fmt, ap);
- } else {
- va_start(ap, fmt);
- fprintf(stderr, "%s: %s:%ld: ", command, fcn, line);
- vfprintf(stderr, fmt, ap);
- putc('\n', stderr);
- va_end(ap);
- }
-}
diff --git a/alsaloop/Android.mk b/alsaloop/Android.mk
deleted file mode 100644
index c42964c..0000000
--- a/alsaloop/Android.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := alsaloop
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := alsaloop.c \
- control.c \
- pcmjob.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/alsaloop/Makefile.in b/alsaloop/Makefile.in
deleted file mode 100644
index 7d8b83b..0000000
--- a/alsaloop/Makefile.in
+++ /dev/null
@@ -1,657 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-@HAVE_SAMPLERATE_TRUE@am__append_1 = -lsamplerate
-bin_PROGRAMS = alsaloop$(EXEEXT)
-subdir = alsaloop
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_alsaloop_OBJECTS = alsaloop.$(OBJEXT) pcmjob.$(OBJEXT) \
- control.$(OBJEXT)
-alsaloop_OBJECTS = $(am_alsaloop_OBJECTS)
-alsaloop_LDADD = $(LDADD)
-am__DEPENDENCIES_1 =
-alsaloop_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsaloop_SOURCES)
-DIST_SOURCES = $(alsaloop_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-LDADD = -lm $(am__append_1)
-AM_CFLAGS = -D_GNU_SOURCE
-alsaloop_SOURCES = alsaloop.c pcmjob.c control.c
-noinst_HEADERS = alsaloop.h
-man_MANS = alsaloop.1
-EXTRA_DIST = alsaloop.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaloop/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign alsaloop/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-alsaloop$(EXEEXT): $(alsaloop_OBJECTS) $(alsaloop_DEPENDENCIES) $(EXTRA_alsaloop_DEPENDENCIES)
- @rm -f alsaloop$(EXEEXT)
- $(LINK) $(alsaloop_OBJECTS) $(alsaloop_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alsaloop.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/control.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcmjob.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsaloop/NOTICE b/alsaloop/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/alsaloop/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/alsaloop/alsaloop.1 b/alsaloop/alsaloop.1
index 33fa4d1..048d1e0 100644
--- a/alsaloop/alsaloop.1
+++ b/alsaloop/alsaloop.1
@@ -1,6 +1,6 @@
.TH ALSALOOP 1 "5 Aug 2010"
.SH NAME
-alsaloop \- command\-line PCM loopback
+alsaloop \- command-line PCM loopback
.SH SYNOPSIS
\fBalsaloop\fP [\fI\-option\fP] [\fIcmd\fP]
.SH DESCRIPTION
@@ -27,10 +27,10 @@
contains the command line options for one job. The '#' means comment and
rest of line is ignored. Example:
- # First line \- comment, second line \- first job
- \-C hw:1,0 \-P hw:0,0 \-t 50000 \-T 1
- # Third line \- comment, fourth line \- second job
- \-C hw:1,1 \-P hw:0,1 \-t 40000 \-T 2
+ # First line - comment, second line - first job
+ -C hw:1,0 -P hw:0,0 -t 50000 -T 1
+ # Third line - comment, fourth line - second job
+ -C hw:1,1 -P hw:0,1 -t 40000 -T 2
.TP
\fI\-d\fP | \fI\-\-daemonize\fP
@@ -70,7 +70,7 @@
.TP
\fI\-f <format>\fP | \fI\-\-format=<format>\fP
-Format specification (usually S16_LE S32_LE). Use \-h to list all formats.
+Format specification (usually S16_LE S32_LE). Use -h to list all formats.
Default format is S16_LE.
.TP
@@ -86,19 +86,19 @@
.TP
\fI\-n\fP | \fI\-\-resample\fP
-Allow rate resampling using alsa\-lib.
+Allow rate resampling using alsa-lib.
.TP
\fI\-A <converter>\fP | \fI\-\-samplerate=<converter>\fP
Use libsamplerate and choose a converter:
- 0 or sincbest \- best quality
- 1 or sincmedium \- medium quality
- 2 or sincfastest \- lowest quality
- 3 or zerohold \- hold zero samples
- 4 or linear \- worst quality - linear resampling
- 5 or auto \- choose best method
+ 0 or sincbest - best quality
+ 1 or sincmedium - medium quality
+ 2 or sincfastest - lowest quality
+ 3 or zerohold - hold zero samples
+ 4 or linear - worst quality - linear resampling
+ 5 or auto - choose best method
.TP
\fI\-B <size>\fP | \fI\-\-buffer=<size>\fP
@@ -118,30 +118,30 @@
.TP
\fI\-b\fP | \fI\-\-nblock\fP
-Non\-block mode (very early process wakeup). Eats more CPU.
+Non-block mode (very early process wakeup). Eats more CPU.
.TP
\fI\-S <mode>\fP | \fI\-\-sync=<mode>\fP
Sync mode specification for capture to playback stream:
- 0 or none \- do not touch the stream
- 1 or simple \- add or remove samples to keep
+ 0 or none - do not touch the stream
+ 1 or simple - add or remove samples to keep
both streams synchronized
- 2 or captshift \- use driver for the capture device
+ 2 or captshift - use driver for the capture device
(if supported) to compensate
the rate shift
- 3 or playshift \- use driver for the playback device
+ 3 or playshift - use driver for the playback device
(if supported) to compensate
the rate shift
- 4 or samplerate \- use samplerate library to do rate resampling
- 5 or auto \- automatically selects the best method
+ 4 or samplerate - use samplerate library to do rate resampling
+ 5 or auto - automatically selects the best method
in this order: captshift, playshift,
samplerate, simple
.TP
\fI\-T <num>\fP | \fI\-\-thread=<num>\fP
-Thread number (\-1 means create a unique thread). All jobs with same
+Thread number (-1 means create a unique thread). All jobs with same
thread numbers are run within one thread.
.TP
@@ -155,12 +155,12 @@
Known attributes:
- name \- control ID name
- index \- control ID index
- device \- control ID device
- subdevice \- control ID subdevice
- iface \- control ID interface
- numid \- control ID numid
+ name - control ID name
+ index - control ID index
+ device - control ID device
+ subdevice - control ID subdevice
+ iface - control ID interface
+ numid - control ID numid
.TP
\fI\-O <ossmixid>\fP | \fI\-\-ossmixer=<midid>\fP
diff --git a/alsaloop/alsaloop.c b/alsaloop/alsaloop.c
index e1a36d2..8710dd1 100644
--- a/alsaloop/alsaloop.c
+++ b/alsaloop/alsaloop.c
@@ -387,9 +387,7 @@
int arg_nblock = 0;
int arg_effect = 0;
int arg_resample = 0;
-#ifdef USE_SAMPLERATE
int arg_samplerate = SRC_SINC_FASTEST + 1;
-#endif
int arg_sync = SYNC_TYPE_AUTO;
int arg_slave = SLAVE_TYPE_AUTO;
int arg_thread = 0;
@@ -476,7 +474,6 @@
case 'n':
arg_resample = 1;
break;
-#ifdef USE_SAMPLERATE
case 'A':
if (strcasecmp(optarg, "sincbest") == 0)
arg_samplerate = SRC_SINC_BEST_QUALITY;
@@ -494,7 +491,6 @@
arg_sync = SRC_SINC_FASTEST;
arg_samplerate += 1;
break;
-#endif
case 'S':
if (strcasecmp(optarg, "samplerate") == 0)
arg_sync = SYNC_TYPE_SAMPLERATE;
@@ -614,6 +610,11 @@
loop->src_enable = arg_samplerate > 0;
if (loop->src_enable)
loop->src_converter_type = arg_samplerate - 1;
+#else
+ if (arg_samplerate > 0) {
+ logit(LOG_CRIT, "No libsamplerate support.\n");
+ exit(EXIT_FAILURE);
+ }
#endif
set_loop_time(loop, arg_loop_time);
add_loop(loop);
diff --git a/alsaloop/effect-sweep.c b/alsaloop/effect-sweep.c
new file mode 100644
index 0000000..4a0903d
--- /dev/null
+++ b/alsaloop/effect-sweep.c
@@ -0,0 +1,128 @@
+/*
+ * Bandpass filter sweep effect
+ * Copyright (c) Maarten de Boer <mdeboer@iua.upf.es>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <math.h>
+#include <alsa/asoundlib.h>
+
+struct effect_private {
+ /* filter the sweep variables */
+ float lfo,dlfo,fs,fc,BW,C,D,a0,a1,a2,b1,b2,*x[3],*y[3];
+ float lfo_depth, lfo_center;
+ unsigned int channels;
+};
+
+static int effect_init(struct lookback *loopback,
+ void *private_data,
+ snd_pcm_access_t access,
+ unsigned int channels,
+ unsigned int rate,
+ snd_pcm_format_t format)
+{
+ struct effect_private *priv = private_data;
+ int i;
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+ if (format != SND_PCM_FORMAT_S16_LE)
+ return -EIO;
+#elif __BYTE_ORDER == __BIG_ENDIAN
+ if (format != SND_PCM_FORMAT_S16_BE)
+ return -EIO;
+#else
+ return -EIO;
+#endif
+ priv->fs = (float) rate;
+ priv->channels = channels;
+ for (i = 0; i < 3; i++) {
+ priv->x[i] = calloc(channels * sizeof(float));
+ priv->y[i] = calloc(channels * sizeof(float));
+ }
+ return 0;
+}
+
+static int effect_done(struct loopback *loopback,
+ void *private_data)
+{
+ struct effect_private *priv = private_data;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ free(priv->x[i]);
+ free(priv->y[i]);
+ }
+ return 0;
+}
+
+static int effect_apply(struct loopback *loopback,
+ void *private_data,
+ const snd_pcm_channel_area_t *areas,
+ snd_uframes_t offset,
+ snd_uframes_t frames)
+{
+ struct effect_private *priv = private_data;
+ short *samples = (short*)areas[0].addr + offset*priv->channels;
+ snd_uframes_t i;
+
+ for (i=0; i < frames; i++) {
+ int chn;
+
+ fc = sin(priv->lfo)*priv->lfo_depth+priv->lfo_center;
+ priv->lfo += priv->dlfo;
+ if (priv->lfo>2.*M_PI) priv->lfo -= 2.*M_PI;
+ priv->C = 1./tan(M_PI*priv->BW/priv->fs);
+ priv->D = 2.*cos(2*M_PI*fc/fs);
+ priv->a0 = 1./(1.+priv->C);
+ priv->a1 = 0;
+ priv->a2 = -priv->a0;
+ priv->b1 = -priv->C*priv->D*a0;
+ priv->b2 = (priv->C-1)*priv->a0;
+
+ for (chn=0; chn < priv->channels; chn++)
+ {
+ priv->x[chn][2] = priv->x[chn][1];
+ priv->x[chn][1] = priv->x[chn][0];
+
+ priv->y[chn][2] = priv->y[chn][1];
+ priv->y[chn][1] = priv->y[chn][0];
+
+ priv->x[chn][0] = samples[i*channels+chn];
+ priv->y[chn][0] = priv->a0*priv->x[0][chn]
+ + priv->a1*priv->x[1][chn] + priv->a2*x[2][chn]
+ - priv->b1*priv->y[1][chn] - priv->b2*y[2][chn];
+ samples[i*channels+chn] = priv->y[chn][0];
+ }
+ }
+ return 0;
+}
+
+void effect_init_sweep(void)
+{
+ struct effect_private *priv;
+
+ priv = register_effect(effect_init,
+ effect_apply,
+ effect_done,
+ sizeof(struct effectprivate));
+ if (priv) {
+ priv->lfo_center = 2000.;
+ priv->lfo_depth = 1800.;
+ priv->lfo_freq = 0.2;
+ priv->BW = 50;
+ }
+}
diff --git a/alsaloop/pcmjob.c b/alsaloop/pcmjob.c
index 139b6fd..bfac2d3 100644
--- a/alsaloop/pcmjob.c
+++ b/alsaloop/pcmjob.c
@@ -246,11 +246,15 @@
} else {
if (lhandle == lhandle->loopback->play) {
val = bufsize + bufsize / 2;
+ if (val < (period_size * 3) / 4)
+ val = (period_size * 3) / 4;
if (val > (buffer_size * 3) / 4)
val = (buffer_size * 3) / 4;
val = buffer_size - val;
} else {
val = bufsize / 2;
+ if (val < period_size / 2)
+ val = period_size / 2;
if (val > buffer_size / 4)
val = buffer_size / 4;
}
@@ -945,23 +949,6 @@
logit(LOG_CRIT, "%s start failed: %s\n", play->id, snd_strerror(err));
return err;
}
- } else if (delay1 < fill) {
- diff = (fill - delay1) / play->pitch;
- while (diff > 0) {
- delay1 = play->buf_size - play->buf_pos;
- if (verbose > 6)
- snd_output_printf(loop->output,
- "sync: playback short, silence filling %li / buf_count=%li\n", (long)delay1, play->buf_count);
- if (delay1 > diff)
- delay1 = diff;
- if ((err = snd_pcm_format_set_silence(play->format, play->buf + play->buf_pos * play->channels, delay1)) < 0)
- return err;
- play->buf_pos += delay1;
- play->buf_pos %= play->buf_size;
- play->buf_count += delay1;
- diff -= delay1;
- }
- writeit(play);
}
if (verbose > 5) {
snd_output_printf(loop->output, "%s: xrun sync ok\n", loop->id);
diff --git a/alsaloop/test.sh b/alsaloop/test.sh
new file mode 100755
index 0000000..fac72b9
--- /dev/null
+++ b/alsaloop/test.sh
@@ -0,0 +1,94 @@
+#!/bin/bash
+
+#DBG="gdb --args "
+#DBG="strace"
+#DBG="valgrind --leak-check=full"
+ARGS=
+CFGFILE="/tmp/alsaloop.test.cfg"
+
+test1() {
+ echo "TEST1"
+ $DBG ./alsaloop -C hw:1,0 -P plughw:0,0 \
+ --tlatency 50000 \
+ --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+ --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+ --mixer "name='PCM Playback Volume'" \
+ --ossmixer "Master@VOLUME" \
+ --ossmixer "PCM@PCM" \
+ $ARGS
+}
+
+test2() {
+ echo "TEST2"
+cat > $CFGFILE <<EOF
+# first job
+-C hw:1,0,0 -P hw:0,0,0 --tlatency 50000 --thread 1 \
+ --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+ --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+ --mixer "name='PCM Playback Volume'"
+# next line - second job
+-C hw:1,0,1 -P hw:0,1,0 --tlatency 50000 --thread 2
+EOF
+ $DBG ./alsaloop -d --config $CFGFILE $ARGS
+}
+
+test3() {
+ echo "TEST3"
+ LATENCY=180000
+cat > $CFGFILE <<EOF
+-C hw:1,0,0 -P plug:dmix:0 --tlatency $LATENCY --thread 0 \
+ --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+ --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+ --mixer "name='PCM Playback Volume'" \
+ --ossmixer "name=Master@VOLUME"
+-C hw:1,0,1 -P plug:dmix:0 --tlatency $LATENCY --thread 1
+-C hw:1,0,2 -P plug:dmix:0 --tlatency $LATENCY --thread 2
+-C hw:1,0,3 -P plug:dmix:0 --tlatency $LATENCY --thread 3
+-C hw:1,0,4 -P plug:dmix:0 --tlatency $LATENCY --thread 4
+-C hw:1,0,5 -P plug:dmix:0 --tlatency $LATENCY --thread 5
+-C hw:1,0,6 -P plug:dmix:0 --tlatency $LATENCY --thread 6
+-C hw:1,0,7 -P plug:dmix:0 --tlatency $LATENCY --thread 7
+EOF
+ $DBG ./alsaloop --config $CFGFILE $ARGS
+}
+
+test4() {
+ echo "TEST4"
+ $DBG ./alsaloop -C hw:1,0 -P plughw:0,0 -a off -r 11025 \
+ --tlatency 50000 \
+ --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+ --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+ --mixer "name='PCM Playback Volume'" \
+ $ARGS
+}
+
+test5() {
+ echo "TEST5"
+cat > $CFGFILE <<EOF
+-C hw:1,0,0 -P plughw:0,0 --tlatency 50000 --thread 1 \
+ --mixer "name='Master Playback Volume'@name='Master Playback Volume'" \
+ --mixer "name='Master Playback Switch'@name='Master Playback Switch'" \
+ --mixer "name='PCM Playback Volume'" \
+ --ossmixer "name=Master@VOLUME"
+-C hw:1,0,1 -P plughw:0,1 --tlatency 50000 --thread 2
+EOF
+ $DBG ./alsaloop --config $CFGFILE $ARGS
+}
+
+sigusr1() {
+ pid=$(ps ax | grep alsaloop | grep -v grep | colrm 7 255)
+ if test -n "$pid"; then
+ echo "Killing alsaloop $pid..."
+ kill -SIGUSR1 $pid
+ fi
+}
+
+case "$1" in
+test1) shift; ARGS="$@"; test1 ;;
+test2) shift; ARGS="$@"; test2 ;;
+test3) shift; ARGS="$@"; test3 ;;
+test4) shift; ARGS="$@"; test4 ;;
+test5) shift; ARGS="$@"; test5 ;;
+usr|sig*) sigusr1 ;;
+*) ARGS="$@"; test1 ;;
+esac
diff --git a/alsamixer/Makefile.in b/alsamixer/Makefile.in
deleted file mode 100644
index 185544d..0000000
--- a/alsamixer/Makefile.in
+++ /dev/null
@@ -1,686 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = alsamixer$(EXEEXT)
-subdir = alsamixer
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_alsamixer_OBJECTS = card_select.$(OBJEXT) cli.$(OBJEXT) \
- colors.$(OBJEXT) device_name.$(OBJEXT) die.$(OBJEXT) \
- mainloop.$(OBJEXT) mem.$(OBJEXT) mixer_controls.$(OBJEXT) \
- mixer_display.$(OBJEXT) mixer_widget.$(OBJEXT) \
- proc_files.$(OBJEXT) textbox.$(OBJEXT) utils.$(OBJEXT) \
- volume_mapping.$(OBJEXT) widget.$(OBJEXT)
-alsamixer_OBJECTS = $(am_alsamixer_OBJECTS)
-alsamixer_LDADD = $(LDADD)
-alsamixer_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsamixer_SOURCES)
-DIST_SOURCES = $(alsamixer_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-AM_CFLAGS = @CURSES_CFLAGS@ -DCURSESINC="@CURSESINC@"
-LDADD = @CURSESLIB@
-alsamixer_SOURCES = card_select.c card_select.h \
- cli.c \
- colors.c colors.h \
- device_name.c device_name.h \
- die.c die.h \
- mainloop.c mainloop.h \
- mem.c mem.h \
- mixer_controls.c mixer_controls.h \
- mixer_display.c mixer_display.h \
- mixer_widget.c mixer_widget.h \
- proc_files.c proc_files.h \
- textbox.c textbox.h \
- utils.c utils.h \
- volume_mapping.c volume_mapping.h \
- widget.c widget.h
-
-man_MANS = alsamixer.1
-EXTRA_DIST = alsamixer.1
-alsamixer_INCLUDES = -I$(top_srcdir)/include
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsamixer/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign alsamixer/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-alsamixer$(EXEEXT): $(alsamixer_OBJECTS) $(alsamixer_DEPENDENCIES) $(EXTRA_alsamixer_DEPENDENCIES)
- @rm -f alsamixer$(EXEEXT)
- $(LINK) $(alsamixer_OBJECTS) $(alsamixer_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/card_select.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cli.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/colors.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/device_name.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/die.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mainloop.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mem.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_controls.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_display.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixer_widget.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proc_files.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/textbox.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/volume_mapping.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/widget.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-#LDFLAGS = -static
-#CFLAGS += -g -Wall
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsamixer/alsamixer.1 b/alsamixer/alsamixer.1
index 8d34680..cd88404 100644
--- a/alsamixer/alsamixer.1
+++ b/alsamixer/alsamixer.1
@@ -157,19 +157,6 @@
Please note that you might need to hit \fIESC\fP twice on some terminals
since it's regarded as a prefix key.
-.SH VOLUME MAPPING
-In \fBalsamixer\fP, the volume is mapped to a value that is more natural
-for a human ear. The mapping is designed so that the position in the
-interval is proportional to the volume as a human ear would perceive
-it, i.e. the position is the cubic root of the linear sample
-multiplication factor. For controls with a small range (24 dB or
-less), the mapping is linear in the dB values so that each step has
-the same size visually.
-
-Only for controls without dB information, a linear mapping of the
-hardware volume register values is used (this is the same algorithm as
-used in the old \fBalsamixer\fP).
-
.SH SEE ALSO
\fB
amixer(1),
diff --git a/alsamixer/cli.c b/alsamixer/cli.c
index 3f8f52f..bb4f030 100644
--- a/alsamixer/cli.c
+++ b/alsamixer/cli.c
@@ -115,9 +115,6 @@
int main(int argc, char *argv[])
{
- if (!isatty(fileno(stdin)))
- return 0;
-
setlocale(LC_ALL, "");
#ifdef ENABLE_NLS_IN_CURSES
textdomain(PACKAGE);
diff --git a/alsamixer/go b/alsamixer/go
new file mode 100755
index 0000000..c33c298
--- /dev/null
+++ b/alsamixer/go
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+#GDB="gdb --args"
+GDB=""
+
+ALSA_MIXER_SIMPLE_MODULES="$HOME/hg/alsa-lib/modules/mixer/simple/.libs" \
+ALSA_MIXER_SIMPLE="$HOME/hg/alsa-lib/src/conf/smixer.conf" \
+ALSA_MIXER_SIMPLE_MPYTHON="$HOME/hg/alsa-lib/modules/mixer/simple/python/main.py" \
+LD_PRELOAD="$HOME/hg/alsa-lib/src/.libs/libasound.so" \
+$GDB ./alsamixer "$@"
diff --git a/alsamixer/mainloop.c b/alsamixer/mainloop.c
index 351f57f..dbfef9b 100644
--- a/alsamixer/mainloop.c
+++ b/alsamixer/mainloop.c
@@ -128,15 +128,8 @@
}
if (!active_widget)
break;
- if (controls_changed) {
- controls_changed = FALSE;
- create_controls();
- control_values_changed = FALSE;
+ if (controls_changed)
display_controls();
- } else if (control_values_changed) {
- control_values_changed = FALSE;
- display_controls();
- }
}
free(pollfds);
}
diff --git a/alsamixer/mixer_display.c b/alsamixer/mixer_display.c
index b1f79d0..8ba396a 100644
--- a/alsamixer/mixer_display.c
+++ b/alsamixer/mixer_display.c
@@ -657,6 +657,7 @@
display_no_controls();
}
display_scroll_indicators();
+ controls_changed = FALSE;
}
void compute_controls_layout(void)
diff --git a/alsamixer/mixer_widget.c b/alsamixer/mixer_widget.c
index 0c2b9e0..caaf777 100644
--- a/alsamixer/mixer_widget.c
+++ b/alsamixer/mixer_widget.c
@@ -50,7 +50,6 @@
snd_mixer_selem_id_t *current_selem_id;
unsigned int current_control_flags;
-bool control_values_changed;
bool controls_changed;
enum channel_mask {
@@ -60,15 +59,20 @@
static int elem_callback(snd_mixer_elem_t *elem, unsigned int mask)
{
- if (mask == SND_CTL_EVENT_MASK_REMOVE) {
- controls_changed = TRUE;
- } else {
- if (mask & SND_CTL_EVENT_MASK_VALUE)
- control_values_changed = TRUE;
+ unsigned int i;
- if (mask & SND_CTL_EVENT_MASK_INFO)
- controls_changed = TRUE;
- }
+ if (mask & (SND_CTL_EVENT_MASK_REMOVE |
+ SND_CTL_EVENT_MASK_INFO |
+ SND_CTL_EVENT_MASK_VALUE))
+ controls_changed = TRUE;
+
+ if (mask & SND_CTL_EVENT_MASK_INFO)
+ for (i = 0; i < controls_count; ++i)
+ if (controls[i].elem == elem) {
+ controls[i].flags &= ~IS_ACTIVE;
+ if (snd_mixer_selem_is_active(controls[i].elem))
+ controls[i].flags |= IS_ACTIVE;
+ }
return 0;
}
diff --git a/alsamixer/mixer_widget.h b/alsamixer/mixer_widget.h
index 086611c..da8628e 100644
--- a/alsamixer/mixer_widget.h
+++ b/alsamixer/mixer_widget.h
@@ -24,7 +24,6 @@
extern snd_mixer_selem_id_t *current_selem_id;
extern unsigned int current_control_flags;
-extern bool control_values_changed;
extern bool controls_changed;
void create_mixer_object(struct snd_mixer_selem_regopt *selem_regopt);
diff --git a/alsaucm/Android.mk b/alsaucm/Android.mk
deleted file mode 100644
index 5ff1220..0000000
--- a/alsaucm/Android.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := alsaucm
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := usecase.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/alsaucm/Makefile.in b/alsaucm/Makefile.in
deleted file mode 100644
index c4e512d..0000000
--- a/alsaucm/Makefile.in
+++ /dev/null
@@ -1,559 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = alsaucm$(EXEEXT)
-subdir = alsaucm
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_alsaucm_OBJECTS = usecase.$(OBJEXT)
-alsaucm_OBJECTS = $(am_alsaucm_OBJECTS)
-alsaucm_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(alsaucm_SOURCES)
-DIST_SOURCES = $(alsaucm_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-alsaucm_SOURCES = usecase.c
-
-# local build
-INCLUDES = -Wall -I$(top_srcdir)/include \
- -I$(top_srcdir)/../alsa-lib/include
-alsaucm_LDADD = -lasound -L$(top_srcdir)/../alsa-lib/src/.libs
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign alsaucm/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign alsaucm/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-alsaucm$(EXEEXT): $(alsaucm_OBJECTS) $(alsaucm_DEPENDENCIES) $(EXTRA_alsaucm_DEPENDENCIES)
- @rm -f alsaucm$(EXEEXT)
- $(LINK) $(alsaucm_OBJECTS) $(alsaucm_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usecase.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binPROGRAMS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/alsaucm/NOTICE b/alsaucm/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/alsaucm/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/alsaucm/go.sh b/alsaucm/go.sh
new file mode 100755
index 0000000..2aadd1c
--- /dev/null
+++ b/alsaucm/go.sh
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+#GDB="gdb --args"
+
+ALSA_CONFIG_UCM="$HOME/alsa/alsa-lib/test/ucm" \
+LD_PRELOAD="$HOME/alsa/alsa-lib/src/.libs/libasound.so" \
+$GDB ./alsaucm "$@"
diff --git a/amidi/Android.mk b/amidi/Android.mk
deleted file mode 100644
index b73c9b7..0000000
--- a/amidi/Android.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := amidi
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := amidi.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/amidi/Makefile.in b/amidi/Makefile.in
deleted file mode 100644
index 92b3549..0000000
--- a/amidi/Makefile.in
+++ /dev/null
@@ -1,645 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = amidi$(EXEEXT)
-subdir = amidi
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-amidi_SOURCES = amidi.c
-amidi_OBJECTS = amidi.$(OBJEXT)
-amidi_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = amidi.c
-DIST_SOURCES = amidi.c
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-EXTRA_DIST = amidi.1
-man_MANS = amidi.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amidi/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign amidi/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-amidi$(EXEEXT): $(amidi_OBJECTS) $(amidi_DEPENDENCIES) $(EXTRA_amidi_DEPENDENCIES)
- @rm -f amidi$(EXEEXT)
- $(LINK) $(amidi_OBJECTS) $(amidi_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amidi.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/amidi/NOTICE b/amidi/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/amidi/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/amidi/amidi.1 b/amidi/amidi.1
index 1b4cfb1..c58d65c 100644
--- a/amidi/amidi.1
+++ b/amidi/amidi.1
@@ -9,7 +9,7 @@
.SH DESCRIPTION
.B amidi
-is a command-line utility which allows one to receive and send
+is a command-line utility which allows to receive and send
SysEx (system exclusive) data from/to external MIDI devices.
It can also send any other MIDI commands.
@@ -141,7 +141,7 @@
default rawmidi definitions
.br
.I /etc/asound.conf
-system\-wide rawmidi definitions
+system-wide rawmidi definitions
.br
.I ~/.asoundrc
user specific rawmidi definitions
diff --git a/amixer/Android.mk b/amixer/Android.mk
deleted file mode 100644
index ec69411..0000000
--- a/amixer/Android.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := amixer
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := amixer.c \
- ../alsamixer/volume_mapping.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/amixer/Makefile.am b/amixer/Makefile.am
index ba67a57..fcd0e81 100644
--- a/amixer/Makefile.am
+++ b/amixer/Makefile.am
@@ -4,7 +4,7 @@
# CFLAGS += -g -Wall
bin_PROGRAMS = amixer
-amixer_SOURCES = amixer.c ../alsamixer/volume_mapping.c
+amixer_SOURCES = amixer.c
noinst_HEADERS = amixer.h
man_MANS = amixer.1
EXTRA_DIST = amixer.1
diff --git a/amixer/Makefile.in b/amixer/Makefile.in
deleted file mode 100644
index b0cde8a..0000000
--- a/amixer/Makefile.in
+++ /dev/null
@@ -1,666 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = amixer$(EXEEXT)
-subdir = amixer
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_amixer_OBJECTS = amixer.$(OBJEXT) volume_mapping.$(OBJEXT)
-amixer_OBJECTS = $(am_amixer_OBJECTS)
-amixer_LDADD = $(LDADD)
-amixer_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(amixer_SOURCES)
-DIST_SOURCES = $(amixer_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-LDADD = -lm
-amixer_SOURCES = amixer.c ../alsamixer/volume_mapping.c
-noinst_HEADERS = amixer.h
-man_MANS = amixer.1
-EXTRA_DIST = amixer.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amixer/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign amixer/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-amixer$(EXEEXT): $(amixer_OBJECTS) $(amixer_DEPENDENCIES) $(EXTRA_amixer_DEPENDENCIES)
- @rm -f amixer$(EXEEXT)
- $(LINK) $(amixer_OBJECTS) $(amixer_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amixer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/volume_mapping.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-volume_mapping.o: ../alsamixer/volume_mapping.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT volume_mapping.o -MD -MP -MF $(DEPDIR)/volume_mapping.Tpo -c -o volume_mapping.o `test -f '../alsamixer/volume_mapping.c' || echo '$(srcdir)/'`../alsamixer/volume_mapping.c
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/volume_mapping.Tpo $(DEPDIR)/volume_mapping.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../alsamixer/volume_mapping.c' object='volume_mapping.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o volume_mapping.o `test -f '../alsamixer/volume_mapping.c' || echo '$(srcdir)/'`../alsamixer/volume_mapping.c
-
-volume_mapping.obj: ../alsamixer/volume_mapping.c
-@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT volume_mapping.obj -MD -MP -MF $(DEPDIR)/volume_mapping.Tpo -c -o volume_mapping.obj `if test -f '../alsamixer/volume_mapping.c'; then $(CYGPATH_W) '../alsamixer/volume_mapping.c'; else $(CYGPATH_W) '$(srcdir)/../alsamixer/volume_mapping.c'; fi`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/volume_mapping.Tpo $(DEPDIR)/volume_mapping.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../alsamixer/volume_mapping.c' object='volume_mapping.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o volume_mapping.obj `if test -f '../alsamixer/volume_mapping.c'; then $(CYGPATH_W) '../alsamixer/volume_mapping.c'; else $(CYGPATH_W) '$(srcdir)/../alsamixer/volume_mapping.c'; fi`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/amixer/NOTICE b/amixer/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/amixer/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/amixer/amixer.1 b/amixer/amixer.1
index 76007d2..b1ac323 100644
--- a/amixer/amixer.1
+++ b/amixer/amixer.1
@@ -4,7 +4,7 @@
.SH SYNOPSIS
\fBamixer\fP [\fI\-option\fP] [\fIcmd\fP]
.SH DESCRIPTION
-\fBamixer\fP allows command\-line control of the mixer for the ALSA
+\fBamixer\fP allows command-line control of the mixer for the ALSA
soundcard driver.
\fBamixer\fP supports multiple soundcards.
@@ -34,7 +34,7 @@
\fIset\fP or \fIsset\fP <\fISCONTROL\fP> <\fIPARAMETER\fP> ...
Sets the simple mixer control contents. The parameter can be the volume
either as a percentage from 0% to 100% with \fI%\fP suffix,
-a dB gain with \fIdB\fP suffix (like \-12.5dB), or an exact hardware value.
+a dB gain with \fIdB\fP suffix (like -12.5dB), or an exact hardware value.
The dB gain can be used only for the mixer elements with available
dB information.
When plus(+) or minus(\-) letter is appended after
@@ -96,7 +96,7 @@
\fI\-s\fP | \fI\-\-stdin\fP
Read from stdin and execute the command on each line sequentially.
-When this option is given, the command in command\-line arguments is ignored.
+When this option is given, the command in command-line arguments is ignored.
Only sset and cset are accepted. Other commands are ignored.
The commands to unmatched ids are ignored without errors too.
@@ -104,21 +104,10 @@
.TP
\fI\-h\fP
Help: show syntax.
-
.TP
\fI\-q\fP
Quiet mode. Do not show results of changes.
-.TP
-\fI\-R\fP
-Use the raw value for evaluating the percentage representation.
-This is the default mode.
-
-.TP
-\fI\-M\fP
-Use the mapped volume for evaluating the percentage representation
-like \fBalsamixer\fR, to be more natural for human ear.
-
.SH EXAMPLES
.TP
@@ -128,8 +117,8 @@
capture (recording).\fR
.TP
-\fBamixer \-c 1 \-\- sset Master playback \-20dB\fR
-will set the master volume of the second card to \-20dB. If the master
+\fBamixer \-c 1 \-\- sset Master playback -20dB\fR
+will set the master volume of the second card to -20dB. If the master
has multiple channels, all channels are set to the same value.
.TP
@@ -145,14 +134,8 @@
\fBamixer \-c 2 cset numid=34 40%\fR
will set the 34th soundcard element to 40%
-.SH SEE ALSO
-\fB
-alsamixer(1)
-\fP
-
.SH BUGS
None known.
-
.SH AUTHOR
\fBamixer\fP is by Jaroslav Kysela <perex@perex.cz>.
This document is by Paul Winkler <zarmzarm@erols.com> and Jaroslav Kysela <perex@perex.cz>.
diff --git a/amixer/amixer.c b/amixer/amixer.c
index 7727943..9d2855d 100644
--- a/amixer/amixer.c
+++ b/amixer/amixer.c
@@ -29,9 +29,7 @@
#include <assert.h>
#include <alsa/asoundlib.h>
#include <sys/poll.h>
-#include <stdint.h>
#include "amixer.h"
-#include "../alsamixer/volume_mapping.h"
#define LEVEL_BASIC (1<<0)
#define LEVEL_INACTIVE (1<<1)
@@ -70,8 +68,6 @@
printf(" -i,--inactive show also inactive controls\n");
printf(" -a,--abstract L select abstraction level (none or basic)\n");
printf(" -s,--stdin Read and execute commands from stdin sequentially\n");
- printf(" -R,--raw-volume Use the raw value (default)\n");
- printf(" -M,--mapped-volume Use the mapped volume\n");
printf("\nAvailable commands:\n");
printf(" scontrols show all mixer simple controls\n");
printf(" scontents show contents of all mixer simple controls (default command)\n");
@@ -138,6 +134,11 @@
return 0;
}
+static const char *control_iface(snd_ctl_elem_id_t *id)
+{
+ return snd_ctl_elem_iface_name(snd_ctl_elem_id_get_interface(id));
+}
+
static const char *control_type(snd_ctl_elem_info_t *info)
{
return snd_ctl_elem_type_name(snd_ctl_elem_info_get_type(info));
@@ -186,9 +187,9 @@
/* Fuction to convert from volume to percentage. val = volume */
-static int convert_prange(long val, long min, long max)
+static int convert_prange(int val, int min, int max)
{
- long range = max - min;
+ int range = max - min;
int tmp;
if (range == 0)
@@ -203,88 +204,110 @@
#define convert_prange1(val, min, max) \
ceil((val) * ((max) - (min)) * 0.01 + (min))
+static const char *get_percent(int val, int min, int max)
+{
+ static char str[32];
+ int p;
+
+ p = convert_prange(val, min, max);
+ sprintf(str, "%i [%i%%]", val, p);
+ return str;
+}
+
+#if 0
+static const char *get_percent1(int val, int min, int max, int min_dB, int max_dB)
+{
+ static char str[32];
+ int p, db;
+
+ p = convert_prange(val, min, max);
+ db = convert_db_range(val, min, max, min_dB, max_dB);
+ sprintf(str, "%i [%i%%] [%i.%02idB]", val, p, db / 100, abs(db % 100));
+ return str;
+}
+#endif
+
+static long get_integer(char **ptr, long min, long max)
+{
+ long val = min;
+ char *p = *ptr, *s;
+
+ if (*p == ':')
+ p++;
+ if (*p == '\0' || (!isdigit(*p) && *p != '-'))
+ goto out;
+
+ s = p;
+ val = strtol(s, &p, 10);
+ if (*p == '.') {
+ p++;
+ strtol(p, &p, 10);
+ }
+ if (*p == '%') {
+ val = (long)convert_prange1(strtod(s, NULL), min, max);
+ p++;
+ }
+ val = check_range(val, min, max);
+ if (*p == ',')
+ p++;
+ out:
+ *ptr = p;
+ return val;
+}
+
+static long get_integer64(char **ptr, long long min, long long max)
+{
+ long long val = min;
+ char *p = *ptr, *s;
+
+ if (*p == ':')
+ p++;
+ if (*p == '\0' || (!isdigit(*p) && *p != '-'))
+ goto out;
+
+ s = p;
+ val = strtol(s, &p, 10);
+ if (*p == '.') {
+ p++;
+ strtol(p, &p, 10);
+ }
+ if (*p == '%') {
+ val = (long long)convert_prange1(strtod(s, NULL), min, max);
+ p++;
+ }
+ val = check_range(val, min, max);
+ if (*p == ',')
+ p++;
+ out:
+ *ptr = p;
+ return val;
+}
+
struct volume_ops {
int (*get_range)(snd_mixer_elem_t *elem, long *min, long *max);
int (*get)(snd_mixer_elem_t *elem, snd_mixer_selem_channel_id_t c,
long *value);
int (*set)(snd_mixer_elem_t *elem, snd_mixer_selem_channel_id_t c,
- long value, int dir);
+ long value);
};
-enum { VOL_RAW, VOL_DB, VOL_MAP };
+enum { VOL_RAW, VOL_DB };
struct volume_ops_set {
int (*has_volume)(snd_mixer_elem_t *elem);
- struct volume_ops v[3];
+ struct volume_ops v[2];
};
static int set_playback_dB(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c, long value, int dir)
+ snd_mixer_selem_channel_id_t c, long value)
{
- return snd_mixer_selem_set_playback_dB(elem, c, value, dir);
+ return snd_mixer_selem_set_playback_dB(elem, c, value, 0);
}
static int set_capture_dB(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c, long value, int dir)
+ snd_mixer_selem_channel_id_t c, long value)
{
- return snd_mixer_selem_set_capture_dB(elem, c, value, dir);
-}
-
-static int set_playback_raw_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c,
- long value, int dir)
-{
- return snd_mixer_selem_set_playback_volume(elem, c, value);
-}
-
-static int set_capture_raw_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c,
- long value, int dir)
-{
- return snd_mixer_selem_set_capture_volume(elem, c, value);
-}
-
-/* FIXME: normalize to int32 space to be compatible with other types */
-#define MAP_VOL_RES (INT32_MAX / 100)
-
-static int get_mapped_volume_range(snd_mixer_elem_t *elem,
- long *pmin, long *pmax)
-{
- *pmin = 0;
- *pmax = MAP_VOL_RES;
- return 0;
-}
-
-static int get_playback_mapped_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c,
- long *value)
-{
- *value = (rint)(get_normalized_playback_volume(elem, c) * MAP_VOL_RES);
- return 0;
-}
-
-static int set_playback_mapped_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c,
- long value, int dir)
-{
- return set_normalized_playback_volume(elem, c,
- (double)value / MAP_VOL_RES, dir);
-}
-
-static int get_capture_mapped_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c,
- long *value)
-{
- *value = (rint)(get_normalized_capture_volume(elem, c) * MAP_VOL_RES);
- return 0;
-}
-
-static int set_capture_mapped_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t c,
- long value, int dir)
-{
- return set_normalized_capture_volume(elem, c,
- (double)value / MAP_VOL_RES, dir);
+ return snd_mixer_selem_set_capture_dB(elem, c, value, 0);
}
static const struct volume_ops_set vol_ops[2] = {
@@ -292,42 +315,29 @@
.has_volume = snd_mixer_selem_has_playback_volume,
.v = {{ snd_mixer_selem_get_playback_volume_range,
snd_mixer_selem_get_playback_volume,
- set_playback_raw_volume },
+ snd_mixer_selem_set_playback_volume },
{ snd_mixer_selem_get_playback_dB_range,
snd_mixer_selem_get_playback_dB,
- set_playback_dB },
- { get_mapped_volume_range,
- get_playback_mapped_volume,
- set_playback_mapped_volume },
- },
+ set_playback_dB }},
},
{
.has_volume = snd_mixer_selem_has_capture_volume,
.v = {{ snd_mixer_selem_get_capture_volume_range,
snd_mixer_selem_get_capture_volume,
- set_capture_raw_volume },
+ snd_mixer_selem_set_capture_volume },
{ snd_mixer_selem_get_capture_dB_range,
snd_mixer_selem_get_capture_dB,
- set_capture_dB },
- { get_mapped_volume_range,
- get_capture_mapped_volume,
- set_capture_mapped_volume },
- },
+ set_capture_dB }},
},
};
-static int std_vol_type = VOL_RAW;
-
static int set_volume_simple(snd_mixer_elem_t *elem,
snd_mixer_selem_channel_id_t chn,
char **ptr, int dir)
{
long val, orig, pmin, pmax;
char *p = *ptr, *s;
- int invalid = 0, percent = 0, err = 0;
- int vol_type = std_vol_type;
- double scale = 1.0;
- int correct = 0;
+ int invalid = 0, err = 0, vol_type = VOL_RAW;
if (! vol_ops[dir].has_volume(elem))
invalid = 1;
@@ -337,6 +347,10 @@
if (*p == '\0' || (!isdigit(*p) && *p != '-'))
goto skip;
+ if (! invalid &&
+ vol_ops[dir].v[VOL_RAW].get_range(elem, &pmin, &pmax) < 0)
+ invalid = 1;
+
s = p;
val = strtol(s, &p, 10);
if (*p == '.') {
@@ -344,37 +358,32 @@
strtol(p, &p, 10);
}
if (*p == '%') {
- percent = 1;
+ if (! invalid)
+ val = (long)convert_prange1(strtod(s, NULL), pmin, pmax);
p++;
} else if (p[0] == 'd' && p[1] == 'B') {
- vol_type = VOL_DB;
+ if (! invalid) {
+ val = (long)(strtod(s, NULL) * 100.0);
+ vol_type = VOL_DB;
+ if (vol_ops[dir].v[vol_type].get_range(elem, &pmin, &pmax) < 0)
+ invalid = 1;
+ }
p += 2;
- scale = 100;
- } else
- vol_type = VOL_RAW;
-
- val = (long)(strtod(s, NULL) * scale);
- if (vol_ops[dir].v[vol_type].get_range(elem, &pmin, &pmax) < 0)
- invalid = 1;
- if (percent)
- val = (long)convert_prange1(val, pmin, pmax);
+ }
if (*p == '+' || *p == '-') {
if (! invalid) {
if (vol_ops[dir].v[vol_type].get(elem, chn, &orig) < 0)
invalid = 1;
- if (*p == '+') {
+ if (*p == '+')
val = orig + val;
- correct = 1;
- } else {
+ else
val = orig - val;
- correct = -1;
- }
}
p++;
}
if (! invalid) {
val = check_range(val, pmin, pmax);
- err = vol_ops[dir].v[vol_type].set(elem, chn, val, correct);
+ err = vol_ops[dir].v[vol_type].set(elem, chn, val);
}
skip:
if (*p == ',')
@@ -415,12 +424,20 @@
static void show_control_id(snd_ctl_elem_id_t *id)
{
- char *str;
-
- str = snd_ctl_ascii_elem_id_get(id);
- if (str)
- printf("%s", str);
- free(str);
+ unsigned int index, device, subdevice;
+ printf("numid=%u,iface=%s,name='%s'",
+ snd_ctl_elem_id_get_numid(id),
+ control_iface(id),
+ snd_ctl_elem_id_get_name(id));
+ index = snd_ctl_elem_id_get_index(id);
+ device = snd_ctl_elem_id_get_device(id);
+ subdevice = snd_ctl_elem_id_get_subdevice(id);
+ if (index)
+ printf(",index=%i", index);
+ if (device)
+ printf(",device=%i", device);
+ if (subdevice)
+ printf(",subdevice=%i", subdevice);
}
static void print_spaces(unsigned int spaces)
@@ -431,11 +448,7 @@
static void print_dB(long dB)
{
- if (dB < 0) {
- printf("-%li.%02lidB", -dB / 100, -dB % 100);
- } else {
- printf("%li.%02lidB", dB / 100, dB % 100);
- }
+ printf("%li.%02lidB", dB / 100, (dB < 0 ? -dB : dB) % 100);
}
static void decode_tlv(unsigned int spaces, unsigned int *tlv, unsigned int tlv_size)
@@ -443,7 +456,6 @@
unsigned int type = tlv[0];
unsigned int size;
unsigned int idx = 0;
- const char *chmap_type = NULL;
if (tlv_size < 2 * sizeof(unsigned int)) {
printf("TLV size error!\n");
@@ -467,7 +479,7 @@
printf("TLV size error in compound!\n");
return;
}
- decode_tlv(spaces + 2, tlv + idx, tlv[idx+1] + 8);
+ decode_tlv(spaces + 2, tlv + idx, tlv[idx+1]);
idx += 2 + (tlv[1] + sizeof(unsigned int) - 1) / sizeof(unsigned int);
}
break;
@@ -496,9 +508,9 @@
}
} else {
printf("min=");
- print_dB((int)tlv[2]);
+ print_dB(tlv[2]);
printf(",max=");
- print_dB((int)tlv[3]);
+ print_dB(tlv[3]);
}
break;
#endif
@@ -536,30 +548,9 @@
}
} else {
printf("min=");
- print_dB((int)tlv[2]);
+ print_dB(tlv[2]);
printf(",max=");
- print_dB((int)tlv[3]);
- }
- break;
-#endif
-#ifdef SND_CTL_TLVT_CHMAP_FIXED
- case SND_CTL_TLVT_CHMAP_FIXED:
- chmap_type = "fixed";
- /* Fall through */
- case SND_CTL_TLVT_CHMAP_VAR:
- if (!chmap_type)
- chmap_type = "variable";
- /* Fall through */
- case SND_CTL_TLVT_CHMAP_PAIRED:
- if (!chmap_type)
- chmap_type = "paired";
- printf("chmap-%s=", chmap_type);
-
- while (size > 0) {
- printf("%s", snd_pcm_chmap_name(tlv[idx++]));
- size -= sizeof(unsigned int);
- if (size > 0)
- printf(",");
+ print_dB(tlv[3]);
}
break;
#endif
@@ -720,33 +711,15 @@
return 0;
}
-static void show_selem_volume(snd_mixer_elem_t *elem,
- snd_mixer_selem_channel_id_t chn, int dir,
- long min, long max)
-{
- long raw, val;
- vol_ops[dir].v[VOL_RAW].get(elem, chn, &raw);
- if (std_vol_type == VOL_RAW)
- val = convert_prange(raw, min, max);
- else {
- vol_ops[dir].v[std_vol_type].get(elem, chn, &val);
- val = convert_prange(val, 0, MAP_VOL_RES);
- }
- printf(" %li [%li%%]", raw, val);
- if (!vol_ops[dir].v[VOL_DB].get(elem, chn, &val)) {
- printf(" [");
- print_dB(val);
- printf("]");
- }
-}
-
static int show_selem(snd_mixer_t *handle, snd_mixer_selem_id_t *id, const char *space, int level)
{
snd_mixer_selem_channel_id_t chn;
long pmin = 0, pmax = 0;
long cmin = 0, cmax = 0;
+ long pvol, cvol;
int psw, csw;
int pmono, cmono, mono_ok = 0;
+ long db;
snd_mixer_elem_t *elem;
elem = snd_mixer_find_selem(handle, id);
@@ -895,7 +868,13 @@
mono_ok = 1;
}
if (snd_mixer_selem_has_common_volume(elem)) {
- show_selem_volume(elem, SND_MIXER_SCHN_MONO, 0, pmin, pmax);
+ snd_mixer_selem_get_playback_volume(elem, SND_MIXER_SCHN_MONO, &pvol);
+ printf(" %s", get_percent(pvol, pmin, pmax));
+ if (!snd_mixer_selem_get_playback_dB(elem, SND_MIXER_SCHN_MONO, &db)) {
+ printf(" [");
+ print_dB(db);
+ printf("]");
+ }
}
if (snd_mixer_selem_has_common_switch(elem)) {
snd_mixer_selem_get_playback_switch(elem, SND_MIXER_SCHN_MONO, &psw);
@@ -912,7 +891,13 @@
if (snd_mixer_selem_has_playback_volume(elem)) {
printf(" Playback");
title = 1;
- show_selem_volume(elem, SND_MIXER_SCHN_MONO, 0, pmin, pmax);
+ snd_mixer_selem_get_playback_volume(elem, SND_MIXER_SCHN_MONO, &pvol);
+ printf(" %s", get_percent(pvol, pmin, pmax));
+ if (!snd_mixer_selem_get_playback_dB(elem, SND_MIXER_SCHN_MONO, &db)) {
+ printf(" [");
+ print_dB(db);
+ printf("]");
+ }
}
}
if (!snd_mixer_selem_has_common_switch(elem)) {
@@ -934,7 +919,13 @@
if (snd_mixer_selem_has_capture_volume(elem)) {
printf(" Capture");
title = 1;
- show_selem_volume(elem, SND_MIXER_SCHN_MONO, 1, cmin, cmax);
+ snd_mixer_selem_get_capture_volume(elem, SND_MIXER_SCHN_MONO, &cvol);
+ printf(" %s", get_percent(cvol, cmin, cmax));
+ if (!snd_mixer_selem_get_capture_dB(elem, SND_MIXER_SCHN_MONO, &db)) {
+ printf(" [");
+ print_dB(db);
+ printf("]");
+ }
}
}
if (!snd_mixer_selem_has_common_switch(elem)) {
@@ -955,7 +946,13 @@
continue;
printf("%s%s:", space, snd_mixer_selem_channel_name(chn));
if (!pmono && !cmono && snd_mixer_selem_has_common_volume(elem)) {
- show_selem_volume(elem, chn, 0, pmin, pmax);
+ snd_mixer_selem_get_playback_volume(elem, chn, &pvol);
+ printf(" %s", get_percent(pvol, pmin, pmax));
+ if (!snd_mixer_selem_get_playback_dB(elem, chn, &db)) {
+ printf(" [");
+ print_dB(db);
+ printf("]");
+ }
}
if (!pmono && !cmono && snd_mixer_selem_has_common_switch(elem)) {
snd_mixer_selem_get_playback_switch(elem, chn, &psw);
@@ -967,7 +964,13 @@
if (snd_mixer_selem_has_playback_volume(elem)) {
printf(" Playback");
title = 1;
- show_selem_volume(elem, chn, 0, pmin, pmax);
+ snd_mixer_selem_get_playback_volume(elem, chn, &pvol);
+ printf(" %s", get_percent(pvol, pmin, pmax));
+ if (!snd_mixer_selem_get_playback_dB(elem, chn, &db)) {
+ printf(" [");
+ print_dB(db);
+ printf("]");
+ }
}
}
if (!snd_mixer_selem_has_common_switch(elem)) {
@@ -985,7 +988,13 @@
if (snd_mixer_selem_has_capture_volume(elem)) {
printf(" Capture");
title = 1;
- show_selem_volume(elem, chn, 1, cmin, cmax);
+ snd_mixer_selem_get_capture_volume(elem, chn, &cvol);
+ printf(" %s", get_percent(cvol, cmin, cmax));
+ if (!snd_mixer_selem_get_capture_dB(elem, chn, &db)) {
+ printf(" [");
+ print_dB(db);
+ printf("]");
+ }
}
}
if (!snd_mixer_selem_has_common_switch(elem)) {
@@ -1043,6 +1052,103 @@
return 0;
}
+static int parse_control_id(const char *str, snd_ctl_elem_id_t *id)
+{
+ int c, size, numid;
+ char *ptr;
+
+ while (*str == ' ' || *str == '\t')
+ str++;
+ if (!(*str))
+ return -EINVAL;
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER); /* default */
+ while (*str) {
+ if (!strncasecmp(str, "numid=", 6)) {
+ str += 6;
+ numid = atoi(str);
+ if (numid <= 0) {
+ fprintf(stderr, "amixer: Invalid numid %d\n", numid);
+ return -EINVAL;
+ }
+ snd_ctl_elem_id_set_numid(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ } else if (!strncasecmp(str, "iface=", 6)) {
+ str += 6;
+ if (!strncasecmp(str, "card", 4)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_CARD);
+ str += 4;
+ } else if (!strncasecmp(str, "mixer", 5)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER);
+ str += 5;
+ } else if (!strncasecmp(str, "pcm", 3)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_PCM);
+ str += 3;
+ } else if (!strncasecmp(str, "rawmidi", 7)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_RAWMIDI);
+ str += 7;
+ } else if (!strncasecmp(str, "timer", 5)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_TIMER);
+ str += 5;
+ } else if (!strncasecmp(str, "sequencer", 9)) {
+ snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_SEQUENCER);
+ str += 9;
+ } else {
+ return -EINVAL;
+ }
+ } else if (!strncasecmp(str, "name=", 5)) {
+ char buf[64];
+ str += 5;
+ ptr = buf;
+ size = 0;
+ if (*str == '\'' || *str == '\"') {
+ c = *str++;
+ while (*str && *str != c) {
+ if (size < (int)sizeof(buf)) {
+ *ptr++ = *str;
+ size++;
+ }
+ str++;
+ }
+ if (*str == c)
+ str++;
+ } else {
+ while (*str && *str != ',') {
+ if (size < (int)sizeof(buf)) {
+ *ptr++ = *str;
+ size++;
+ }
+ str++;
+ }
+ }
+ *ptr = '\0';
+ snd_ctl_elem_id_set_name(id, buf);
+ } else if (!strncasecmp(str, "index=", 6)) {
+ str += 6;
+ snd_ctl_elem_id_set_index(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ } else if (!strncasecmp(str, "device=", 7)) {
+ str += 7;
+ snd_ctl_elem_id_set_device(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ } else if (!strncasecmp(str, "subdevice=", 10)) {
+ str += 10;
+ snd_ctl_elem_id_set_subdevice(id, atoi(str));
+ while (isdigit(*str))
+ str++;
+ }
+ if (*str == ',') {
+ str++;
+ } else {
+ if (*str)
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
static int parse_simple_id(const char *str, snd_mixer_selem_id_t *sid)
{
int c, size;
@@ -1091,6 +1197,34 @@
return 0;
}
+static int get_ctl_enum_item_index(snd_ctl_t *handle, snd_ctl_elem_info_t *info,
+ char **ptrp)
+{
+ char *ptr = *ptrp;
+ int items, i, len;
+ const char *name;
+
+ items = snd_ctl_elem_info_get_items(info);
+ if (items <= 0)
+ return -1;
+
+ for (i = 0; i < items; i++) {
+ snd_ctl_elem_info_set_item(info, i);
+ if (snd_ctl_elem_info(handle, info) < 0)
+ return -1;
+ name = snd_ctl_elem_info_get_item_name(info);
+ len = strlen(name);
+ if (! strncmp(name, ptr, len)) {
+ if (! ptr[len] || ptr[len] == ',' || ptr[len] == '\n') {
+ ptr += len;
+ *ptrp = ptr;
+ return i;
+ }
+ }
+ }
+ return -1;
+}
+
static int cset(int argc, char *argv[], int roflag, int keep_handle)
{
int err;
@@ -1098,6 +1232,10 @@
snd_ctl_elem_info_t *info;
snd_ctl_elem_id_t *id;
snd_ctl_elem_value_t *control;
+ char *ptr;
+ unsigned int idx, count;
+ long tmp;
+ snd_ctl_elem_type_t type;
snd_ctl_elem_info_alloca(&info);
snd_ctl_elem_id_alloca(&id);
snd_ctl_elem_value_alloca(&control);
@@ -1106,7 +1244,7 @@
fprintf(stderr, "Specify a full control identifier: [[iface=<iface>,][name='name',][index=<index>,][device=<device>,][subdevice=<subdevice>]]|[numid=<numid>]\n");
return -EINVAL;
}
- if (snd_ctl_ascii_elem_id_parse(id, argv[0])) {
+ if (parse_control_id(argv[0], id)) {
fprintf(stderr, "Wrong control identifier: %s\n", argv[0]);
return -EINVAL;
}
@@ -1131,28 +1269,66 @@
}
return err;
}
- snd_ctl_elem_info_get_id(info, id); /* FIXME: Remove it when hctl find works ok !!! */
+ snd_ctl_elem_info_get_id(info, id); /* FIXME: Remove it when hctl find works ok !!! */
+ type = snd_ctl_elem_info_get_type(info);
+ count = snd_ctl_elem_info_get_count(info);
+ snd_ctl_elem_value_set_id(control, id);
+
if (!roflag) {
- snd_ctl_elem_value_set_id(control, id);
- if ((err = snd_ctl_elem_read(handle, control)) < 0) {
- if (ignore_error)
- return 0;
- error("Cannot read the given element from control %s\n", card);
- if (! keep_handle) {
- snd_ctl_close(handle);
- handle = NULL;
+ ptr = argv[1];
+ for (idx = 0; idx < count && idx < 128 && ptr && *ptr; idx++) {
+ switch (type) {
+ case SND_CTL_ELEM_TYPE_BOOLEAN:
+ tmp = 0;
+ if (!strncasecmp(ptr, "on", 2) || !strncasecmp(ptr, "up", 2)) {
+ tmp = 1;
+ ptr += 2;
+ } else if (!strncasecmp(ptr, "yes", 3)) {
+ tmp = 1;
+ ptr += 3;
+ } else if (!strncasecmp(ptr, "toggle", 6)) {
+ tmp = snd_ctl_elem_value_get_boolean(control, idx);
+ tmp = tmp > 0 ? 0 : 1;
+ ptr += 6;
+ } else if (isdigit(*ptr)) {
+ tmp = atoi(ptr) > 0 ? 1 : 0;
+ while (isdigit(*ptr))
+ ptr++;
+ } else {
+ while (*ptr && *ptr != ',')
+ ptr++;
+ }
+ snd_ctl_elem_value_set_boolean(control, idx, tmp);
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER:
+ tmp = get_integer(&ptr,
+ snd_ctl_elem_info_get_min(info),
+ snd_ctl_elem_info_get_max(info));
+ snd_ctl_elem_value_set_integer(control, idx, tmp);
+ break;
+ case SND_CTL_ELEM_TYPE_INTEGER64:
+ tmp = get_integer64(&ptr,
+ snd_ctl_elem_info_get_min64(info),
+ snd_ctl_elem_info_get_max64(info));
+ snd_ctl_elem_value_set_integer64(control, idx, tmp);
+ break;
+ case SND_CTL_ELEM_TYPE_ENUMERATED:
+ tmp = get_ctl_enum_item_index(handle, info, &ptr);
+ if (tmp < 0)
+ tmp = get_integer(&ptr, 0, snd_ctl_elem_info_get_items(info) - 1);
+ snd_ctl_elem_value_set_enumerated(control, idx, tmp);
+ break;
+ case SND_CTL_ELEM_TYPE_BYTES:
+ tmp = get_integer(&ptr, 0, 255);
+ snd_ctl_elem_value_set_byte(control, idx, tmp);
+ break;
+ default:
+ break;
}
- return err;
- }
- err = snd_ctl_ascii_value_parse(handle, control, info, argv[1]);
- if (err < 0) {
- if (!ignore_error)
- error("Control %s parse error: %s\n", card, snd_strerror(err));
- if (!keep_handle) {
- snd_ctl_close(handle);
- handle = NULL;
- }
- return ignore_error ? 0 : err;
+ if (!strchr(argv[1], ','))
+ ptr = argv[1];
+ else if (*ptr == ',')
+ ptr++;
}
if ((err = snd_ctl_elem_write(handle, control)) < 0) {
if (!ignore_error)
@@ -1751,8 +1927,6 @@
{"version", 0, NULL, 'v'},
{"abstract", 1, NULL, 'a'},
{"stdin", 0, NULL, 's'},
- {"raw-volume", 0, NULL, 'R'},
- {"mapped-volume", 0, NULL, 'M'},
{NULL, 0, NULL, 0},
};
@@ -1760,7 +1934,7 @@
while (1) {
int c;
- if ((c = getopt_long(argc, argv, "hc:D:qidnva:sRM", long_option, NULL)) < 0)
+ if ((c = getopt_long(argc, argv, "hc:D:qidnva:s", long_option, NULL)) < 0)
break;
switch (c) {
case 'h':
@@ -1813,12 +1987,6 @@
case 's':
read_stdin = 1;
break;
- case 'R':
- std_vol_type = VOL_RAW;
- break;
- case 'M':
- std_vol_type = VOL_MAP;
- break;
default:
fprintf(stderr, "Invalid switch or option needs an argument.\n");
morehelp++;
diff --git a/amixer/go b/amixer/go
new file mode 100755
index 0000000..071627f
--- /dev/null
+++ b/amixer/go
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+#GDB="gdb --args"
+GDB=""
+
+ALSA_MIXER_SIMPLE_MODULES="$HOME/hg/alsa-lib/modules/mixer/simple/.libs" \
+ALSA_MIXER_SIMPLE="$HOME/hg/alsa-lib/src/conf/smixer.conf" \
+ALSA_MIXER_SIMPLE_MPYTHON="$HOME/hg/alsa-lib/modules/mixer/simple/python/main.py" \
+LD_PRELOAD="$HOME/hg/alsa-lib/src/.libs/libasound.so" \
+$GDB ./amixer "$@"
diff --git a/aplay/Android.mk b/aplay/Android.mk
deleted file mode 100644
index b0db639..0000000
--- a/aplay/Android.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := aplay
-LOCAL_MODULE_TAGS := optional
-LOCAL_SRC_FILES := aplay.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-include $(BUILD_EXECUTABLE)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := arecord
-LOCAL_MODULE_TAGS := optional
-LOCAL_REQUIRED_MODULES := aplay
-include $(BUILD_PHONY_PACKAGE)
-
-.PHONY: create_arecord_symlink
-create_arecord_symlink: aplay
- cd $(TARGET_OUT_EXECUTABLES) && ln -sf aplay arecord
-
-$(LOCAL_BUILT_MODULE): create_arecord_symlink
diff --git a/aplay/Makefile.in b/aplay/Makefile.in
deleted file mode 100644
index 0fe116c..0000000
--- a/aplay/Makefile.in
+++ /dev/null
@@ -1,670 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = aplay$(EXEEXT)
-subdir = aplay
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-aplay_SOURCES = aplay.c
-aplay_OBJECTS = aplay.$(OBJEXT)
-aplay_LDADD = $(LDADD)
-am__DEPENDENCIES_1 =
-aplay_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = aplay.c
-DIST_SOURCES = aplay.c
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-LDADD = $(LIBINTL) $(LIBRT)
-man_MANS = aplay.1 arecord.1
-noinst_HEADERS = formats.h
-EXTRA_DIST = aplay.1 arecord.1
-EXTRA_CLEAN = arecord
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign aplay/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign aplay/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-aplay$(EXEEXT): $(aplay_OBJECTS) $(aplay_DEPENDENCIES) $(EXTRA_aplay_DEPENDENCIES)
- @rm -f aplay$(EXEEXT)
- $(LINK) $(aplay_OBJECTS) $(aplay_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aplay.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-data-am install-exec-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-data-hook install-dvi \
- install-dvi-am install-exec install-exec-am install-exec-hook \
- install-html install-html-am install-info install-info-am \
- install-man install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
- ps ps-am tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-arecord: aplay
- rm -f arecord
- $(LN_S) $< $@
-
-arecord.1: aplay.1
- rm -f arecord.1
- $(LN_S) $< $@
-
-install-exec-hook: arecord
- rm -f $(DESTDIR)$(bindir)/arecord
- (cd $(DESTDIR)$(bindir) && $(LN_S) aplay arecord)
-
-install-data-hook:
- rm -f $(DESTDIR)$(mandir)/man1/arecord.1
- (cd $(DESTDIR)$(mandir)/man1 && $(LN_S) aplay.1 arecord.1)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/aplay/NOTICE b/aplay/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/aplay/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/aplay/aplay.1 b/aplay/aplay.1
index 2945dad..8ccf556 100644
--- a/aplay/aplay.1
+++ b/aplay/aplay.1
@@ -1,6 +1,6 @@
.TH APLAY 1 "1 January 2010"
.SH NAME
-arecord, aplay \- command\-line sound recorder and player for ALSA
+arecord, aplay \- command-line sound recorder and player for ALSA
soundcard driver
.SH SYNOPSIS
\fBarecord\fP [\fIflags\fP] [filename]
@@ -8,7 +8,7 @@
\fBaplay\fP [\fIflags\fP] [filename [filename]] ...
.SH DESCRIPTION
-\fBarecord\fP is a command\-line soundfile recorder for the ALSA soundcard
+\fBarecord\fP is a command-line soundfile recorder for the ALSA soundcard
driver. It supports several file formats and multiple soundcards with
multiple devices. If recording with interleaved mode samples the file is
automatically split before the 2GB filesize.
@@ -81,11 +81,11 @@
Min ticks to sleep. The default is not to sleep.
.TP
\fI\-M, \-\-mmap\fP
-Use memory\-mapped (mmap) I/O mode for the audio stream.
+Use memory-mapped (mmap) I/O mode for the audio stream.
If this option is not set, the read/write I/O mode will be used.
.TP
\fI\-N, \-\-nonblock\fP
-Open the audio device in non\-blocking mode. If the device is busy the program will exit immediately.
+Open the audio device in non-blocking mode. If the device is busy the program will exit immediately.
If this option is not set the program will block until the audio device is available again.
.TP
\fI\-F, \-\-period\-time=#\fP
@@ -120,8 +120,8 @@
is given twice or three times.
.TP
\fI\-V, \-\-vumeter=TYPE\fP
-Specifies the VU\-meter type, either \fIstereo\fP or \fImono\fP.
-The stereo VU\-meter is available only for 2\-channel stereo samples
+Specifies the VU-meter type, either \fIstereo\fP or \fImono\fP.
+The stereo VU-meter is available only for 2-channel stereo samples
with interleaved format.
.TP
\fI\-I, \-\-separate\-channels\fP
@@ -141,17 +141,6 @@
Allow interactive operation via stdin.
Currently only pause/resume via space or enter key is implemented.
.TP
-\fI-m, \-\-chmap=ch1,ch2,...\fP
-Give the channel map to override or follow. Pass channel position
-strings like \fIFL\fP, \fIFR\fP, etc.
-
-If a device supports the override of the channel map, \fBaplay\fP
-tries to pass the given channel map.
-If it doesn't support the channel map override but still it provides
-the channel map information, \fBaplay\fP tries to rearrange the
-channel order in the buffer to match with the returned channel map
-from the device.
-.TP
\fI\-\-disable\-resample\fP
Disable automatic rate resample.
.TP
@@ -173,7 +162,7 @@
Minimum value is 1.
.TP
\fI\-\-test\-nowait\fP
-Do not wait for the ring buffer \(hy eats the whole CPU.
+Do not wait for the ring buffer--eats the whole CPU.
.TP
\fI\-\-max\-file\-time\fP
While recording, when the output file has been accumulating
@@ -188,24 +177,13 @@
send signals to it.
.TP
\fI\-\-use\-strftime\fP
-When recording, interpret %\-codes in the file name parameter using
+When recording, interpret %-codes in the file name parameter using
the strftime facility whenever the output file is opened. The
important strftime codes are: %Y is the year, %m month, %d day of
the month, %H hour, %M minute and %S second. In addition, %v is
the file number, starting at 1. When this option is specified,
intermediate directories for the output file are created automatically.
This option has no effect if \-\-separate\-channels is specified.
-.TP
-\fI\-\-dump\-hw\-params\fP
-Dump hw_params of the device preconfigured status to stderr. The dump
-lists capabilities of the selected device such as supported formats,
-sampling rates, numbers of channels, period and buffer bytes/sizes/times.
-For raw device hw:X this option basically lists hardware capabilities of
-the soundcard.
-.TP
-\fI\-\-fatal\-errors\fP
-Disables recovery attempts when errors (e.g. xrun) are encountered; the
-aplay process instead aborts immediately.
.SH SIGNALS
When recording, SIGINT, SIGTERM and SIGABRT will close the output
@@ -218,11 +196,11 @@
.TP
\fBaplay \-c 1 \-t raw \-r 22050 \-f mu_law foobar\fR
will play the raw file "foobar" as a
-22050\-Hz, mono, 8\-bit, Mu\-Law .au file.
+22050-Hz, mono, 8-bit, Mu-Law .au file.
.TP
\fBarecord \-d 10 \-f cd \-t wav \-D copy foobar.wav\fP
-will record foobar.wav as a 10\-second, CD\-quality wave file, using the
+will record foobar.wav as a 10-second, CD-quality wave file, using the
PCM "copy" (which might be defined in the user's .asoundrc file as:
.nf
pcm.copy {
@@ -235,14 +213,14 @@
.fi
.TP
-\fBarecord \-t wav \-\-max\-file\-time 30 mon.wav\fP
+\fBarecord \-t wav \-max-file_time 30 mon.wav\fP
Record from the default audio source in monaural, 8,000 samples
per second, 8 bits per sample. Start a new file every
-30 seconds. File names are mon\-nn.wav, where nn increases
-from 01. The file after mon\-99.wav is mon\-100.wav.
+30 seconds. File names are mon-nn.wav, where nn increases
+from 01. The file after mon-99.wav is mon-100.wav.
.TP
-\fBarecord \-f cd \-t wav \-\-max\-file\-time 3600 \-\-use-strftime %Y/%m/%d/listen-%H-%M-%v.wav\fP
+\fBarecord \-f cd \-t wav \-max-file-time 3600 --use-strftime %Y/%m/%d/listen-%H-%M-%v.wav\fP
Record in stereo from the default audio source. Create a new file
every hour. The files are placed in directories based on their start dates
and have names which include their start times and file numbers.
diff --git a/aplay/aplay.c b/aplay/aplay.c
index 89c6b06..73a9544 100644
--- a/aplay/aplay.c
+++ b/aplay/aplay.c
@@ -42,10 +42,10 @@
#include <alsa/asoundlib.h>
#include <assert.h>
#include <termios.h>
-#include <signal.h>
#include <sys/poll.h>
#include <sys/uio.h>
#include <sys/time.h>
+#include <sys/signal.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <endian.h>
@@ -54,10 +54,6 @@
#include "formats.h"
#include "version.h"
-#ifdef SND_CHMAP_API_VERSION
-#define CONFIG_SUPPORT_CHMAP 1
-#endif
-
#ifndef LLONG_MAX
#define LLONG_MAX 9223372036854775807LL
#endif
@@ -107,7 +103,6 @@
static int mmap_flag = 0;
static int interleaved = 1;
static int nonblock = 0;
-static int in_aborting = 0;
static u_char *audiobuf = NULL;
static snd_pcm_uframes_t chunk_size = 0;
static unsigned period_time = 0;
@@ -120,7 +115,6 @@
static int monotonic = 0;
static int interactive = 0;
static int can_pause = 0;
-static int fatal_errors = 0;
static int verbose = 0;
static int vumeter = VUMETER_NONE;
static int buffer_pos = 0;
@@ -135,7 +129,6 @@
static int use_strftime = 0;
volatile static int recycle_capture_file = 0;
static long term_c_lflag = -1;
-static int dump_hw_params = 0;
static int fd = -1;
static off64_t pbrec_count = LLONG_MAX, fdcount;
@@ -145,11 +138,6 @@
FILE *pidf = NULL;
static int pidfile_written = 0;
-#ifdef CONFIG_SUPPORT_CHMAP
-static snd_pcm_chmap_t *channel_map = NULL; /* chmap to override */
-static unsigned int *hw_map = NULL; /* chmap to follow */
-#endif
-
/* needed prototypes */
static void done_stdin(void);
@@ -224,7 +212,6 @@
"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
"-I, --separate-channels one file for each channel\n"
"-i, --interactive allow interactive operation from stdin\n"
-"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
" --disable-resample disable automatic rate resample\n"
" --disable-channels disable automatic channel conversions\n"
" --disable-format disable automatic format conversions\n"
@@ -236,10 +223,7 @@
" --max-file-time=# start another output file when the old file has recorded\n"
" for this many seconds\n"
" --process-id-file write the process ID here\n"
-" --use-strftime apply the strftime facility to the output file name\n"
-" --dump-hw-params dump hw_params of the device\n"
-" --fatal-errors treat all errors as fatal\n"
- )
+" --use-strftime apply the strftime facility to the output file name\n")
, command);
printf(_("Recognized sample formats are:"));
for (k = 0; k < SND_PCM_FORMAT_LAST; ++k) {
@@ -248,7 +232,7 @@
printf(" %s", s);
}
printf(_("\nSome of these may not be available on selected hardware\n"));
- printf(_("The available format shortcuts are:\n"));
+ printf(_("The availabled format shortcuts are:\n"));
printf(_("-f cd (16 bit little endian, 44100, stereo)\n"));
printf(_("-f cdr (16 bit big endian, 44100, stereo)\n"));
printf(_("-f dat (16 bit little endian, 48000, stereo)\n"));
@@ -384,6 +368,8 @@
static void signal_handler(int sig)
{
+ static int in_aborting;
+
if (in_aborting)
return;
@@ -392,14 +378,22 @@
putchar('\n');
if (!quiet_mode)
fprintf(stderr, _("Aborted by signal %s...\n"), strsignal(sig));
- if (handle)
- snd_pcm_abort(handle);
- if (sig == SIGABRT) {
- /* do not call snd_pcm_close() and abort immediately */
- handle = NULL;
- prg_exit(EXIT_FAILURE);
+ if (stream == SND_PCM_STREAM_CAPTURE) {
+ if (fmt_rec_table[file_type].end) {
+ fmt_rec_table[file_type].end(fd);
+ fd = -1;
+ }
+ stream = -1;
}
- signal(sig, signal_handler);
+ if (fd > 1) {
+ close(fd);
+ fd = -1;
+ }
+ if (handle && sig != SIGABRT) {
+ snd_pcm_close(handle);
+ handle = NULL;
+ }
+ prg_exit(EXIT_FAILURE);
}
/* call on SIGUSR1 signal. */
@@ -422,19 +416,13 @@
OPT_TEST_NOWAIT,
OPT_MAX_FILE_TIME,
OPT_PROCESS_ID_FILE,
- OPT_USE_STRFTIME,
- OPT_DUMP_HWPARAMS,
- OPT_FATAL_ERRORS,
+ OPT_USE_STRFTIME
};
int main(int argc, char *argv[])
{
int option_index;
- static const char short_options[] = "hnlLD:qt:c:f:r:d:MNF:A:R:T:B:vV:IPCi"
-#ifdef CONFIG_SUPPORT_CHMAP
- "m:"
-#endif
- ;
+ static const char short_options[] = "hnlLD:qt:c:f:r:d:MNF:A:R:T:B:vV:IPCi";
static const struct option long_options[] = {
{"help", 0, 0, 'h'},
{"version", 0, 0, OPT_VERSION},
@@ -473,18 +461,12 @@
{"process-id-file", 1, 0, OPT_PROCESS_ID_FILE},
{"use-strftime", 0, 0, OPT_USE_STRFTIME},
{"interactive", 0, 0, 'i'},
- {"dump-hw-params", 0, 0, OPT_DUMP_HWPARAMS},
- {"fatal-errors", 0, 0, OPT_FATAL_ERRORS},
-#ifdef CONFIG_SUPPORT_CHMAP
- {"chmap", 1, 0, 'm'},
-#endif
{0, 0, 0, 0}
};
char *pcm_name = "default";
int tmp, err, c;
int do_device_list = 0, do_pcm_list = 0;
snd_pcm_info_t *info;
- FILE *direction;
#ifdef ENABLE_NLS
setlocale(LC_ALL, "");
@@ -503,21 +485,14 @@
file_type = FORMAT_WAVE;
command = "arecord";
start_delay = 1;
- direction = stdout;
} else if (strstr(argv[0], "aplay")) {
stream = SND_PCM_STREAM_PLAYBACK;
command = "aplay";
- direction = stdin;
} else {
error(_("command should be named either arecord or aplay"));
return 1;
}
- if (isatty(fileno(direction)) && (argc == 1)) {
- usage(command);
- return 1;
- }
-
chunk_size = -1;
rhwparams.format = DEFAULT_FORMAT;
rhwparams.rate = DEFAULT_SPEED;
@@ -687,21 +662,6 @@
case OPT_USE_STRFTIME:
use_strftime = 1;
break;
- case OPT_DUMP_HWPARAMS:
- dump_hw_params = 1;
- break;
- case OPT_FATAL_ERRORS:
- fatal_errors = 1;
- break;
-#ifdef CONFIG_SUPPORT_CHMAP
- case 'm':
- channel_map = snd_pcm_chmap_parse_string(optarg);
- if (!channel_map) {
- fprintf(stderr, _("Unable to parse channel map string: %s\n"), optarg);
- return 1;
- }
- break;
-#endif
default:
fprintf(stderr, _("Try `%s --help' for more information.\n"), command);
return 1;
@@ -816,7 +776,7 @@
{
ssize_t result = 0, res;
- while (count > 0 && !in_aborting) {
+ while (count > 0) {
if ((res = read(fd, buf, count)) == 0)
break;
if (res < 0)
@@ -883,20 +843,11 @@
WaveFmtBody *f;
WaveChunkHeader *c;
u_int type, len;
- unsigned short format, channels;
- int big_endian, native_format;
if (size < sizeof(WaveHeader))
return -1;
- if (h->magic == WAV_RIFF)
- big_endian = 0;
- else if (h->magic == WAV_RIFX)
- big_endian = 1;
- else
+ if (h->magic != WAV_RIFF || h->type != WAV_WAVE)
return -1;
- if (h->type != WAV_WAVE)
- return -1;
-
if (size > sizeof(WaveHeader)) {
check_wavefile_space(buffer, size - sizeof(WaveHeader), blimit);
memcpy(buffer, _buffer + sizeof(WaveHeader), size - sizeof(WaveHeader));
@@ -907,7 +858,7 @@
test_wavefile_read(fd, buffer, &size, sizeof(WaveChunkHeader), __LINE__);
c = (WaveChunkHeader*)buffer;
type = c->type;
- len = TO_CPU_INT(c->length, big_endian);
+ len = LE_INT(c->length);
len += len % 2;
if (size > sizeof(WaveChunkHeader))
memmove(buffer, buffer + sizeof(WaveChunkHeader), size - sizeof(WaveChunkHeader));
@@ -929,8 +880,7 @@
check_wavefile_space(buffer, len, blimit);
test_wavefile_read(fd, buffer, &size, len, __LINE__);
f = (WaveFmtBody*) buffer;
- format = TO_CPU_SHORT(f->format, big_endian);
- if (format == WAV_FMT_EXTENSIBLE) {
+ if (LE_SHORT(f->format) == WAV_FMT_EXTENSIBLE) {
WaveFmtExtensibleBody *fe = (WaveFmtExtensibleBody*)buffer;
if (len < sizeof(WaveFmtExtensibleBody)) {
error(_("unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"),
@@ -941,20 +891,19 @@
error(_("wrong format tag in extensible 'fmt ' chunk"));
prg_exit(EXIT_FAILURE);
}
- format = TO_CPU_SHORT(fe->guid_format, big_endian);
+ f->format = fe->guid_format;
}
- if (format != WAV_FMT_PCM &&
- format != WAV_FMT_IEEE_FLOAT) {
- error(_("can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"), format);
+ if (LE_SHORT(f->format) != WAV_FMT_PCM &&
+ LE_SHORT(f->format) != WAV_FMT_IEEE_FLOAT) {
+ error(_("can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"), LE_SHORT(f->format));
prg_exit(EXIT_FAILURE);
}
- channels = TO_CPU_SHORT(f->channels, big_endian);
- if (channels < 1) {
- error(_("can't play WAVE-files with %d tracks"), channels);
+ if (LE_SHORT(f->channels) < 1) {
+ error(_("can't play WAVE-files with %d tracks"), LE_SHORT(f->channels));
prg_exit(EXIT_FAILURE);
}
- hwparams.channels = channels;
- switch (TO_CPU_SHORT(f->bit_p_spl, big_endian)) {
+ hwparams.channels = LE_SHORT(f->channels);
+ switch (LE_SHORT(f->bit_p_spl)) {
case 8:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_U8)
@@ -962,69 +911,43 @@
hwparams.format = SND_PCM_FORMAT_U8;
break;
case 16:
- if (big_endian)
- native_format = SND_PCM_FORMAT_S16_BE;
- else
- native_format = SND_PCM_FORMAT_S16_LE;
if (hwparams.format != DEFAULT_FORMAT &&
- hwparams.format != native_format)
- fprintf(stderr, _("Warning: format is changed to %s\n"),
- snd_pcm_format_name(native_format));
- hwparams.format = native_format;
+ hwparams.format != SND_PCM_FORMAT_S16_LE)
+ fprintf(stderr, _("Warning: format is changed to S16_LE\n"));
+ hwparams.format = SND_PCM_FORMAT_S16_LE;
break;
case 24:
- switch (TO_CPU_SHORT(f->byte_p_spl, big_endian) / hwparams.channels) {
+ switch (LE_SHORT(f->byte_p_spl) / hwparams.channels) {
case 3:
- if (big_endian)
- native_format = SND_PCM_FORMAT_S24_3BE;
- else
- native_format = SND_PCM_FORMAT_S24_3LE;
if (hwparams.format != DEFAULT_FORMAT &&
- hwparams.format != native_format)
- fprintf(stderr, _("Warning: format is changed to %s\n"),
- snd_pcm_format_name(native_format));
- hwparams.format = native_format;
+ hwparams.format != SND_PCM_FORMAT_S24_3LE)
+ fprintf(stderr, _("Warning: format is changed to S24_3LE\n"));
+ hwparams.format = SND_PCM_FORMAT_S24_3LE;
break;
case 4:
- if (big_endian)
- native_format = SND_PCM_FORMAT_S24_BE;
- else
- native_format = SND_PCM_FORMAT_S24_LE;
if (hwparams.format != DEFAULT_FORMAT &&
- hwparams.format != native_format)
- fprintf(stderr, _("Warning: format is changed to %s\n"),
- snd_pcm_format_name(native_format));
- hwparams.format = native_format;
+ hwparams.format != SND_PCM_FORMAT_S24_LE)
+ fprintf(stderr, _("Warning: format is changed to S24_LE\n"));
+ hwparams.format = SND_PCM_FORMAT_S24_LE;
break;
default:
error(_(" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"),
- TO_CPU_SHORT(f->bit_p_spl, big_endian),
- TO_CPU_SHORT(f->byte_p_spl, big_endian),
- hwparams.channels);
+ LE_SHORT(f->bit_p_spl), LE_SHORT(f->byte_p_spl), hwparams.channels);
prg_exit(EXIT_FAILURE);
}
break;
case 32:
- if (format == WAV_FMT_PCM) {
- if (big_endian)
- native_format = SND_PCM_FORMAT_S32_BE;
- else
- native_format = SND_PCM_FORMAT_S32_LE;
- hwparams.format = native_format;
- } else if (format == WAV_FMT_IEEE_FLOAT) {
- if (big_endian)
- native_format = SND_PCM_FORMAT_FLOAT_BE;
- else
- native_format = SND_PCM_FORMAT_FLOAT_LE;
- hwparams.format = native_format;
- }
+ if (LE_SHORT(f->format) == WAV_FMT_PCM)
+ hwparams.format = SND_PCM_FORMAT_S32_LE;
+ else if (LE_SHORT(f->format) == WAV_FMT_IEEE_FLOAT)
+ hwparams.format = SND_PCM_FORMAT_FLOAT_LE;
break;
default:
error(_(" can't play WAVE-files with sample %d bits wide"),
- TO_CPU_SHORT(f->bit_p_spl, big_endian));
+ LE_SHORT(f->bit_p_spl));
prg_exit(EXIT_FAILURE);
}
- hwparams.rate = TO_CPU_INT(f->sample_fq, big_endian);
+ hwparams.rate = LE_INT(f->sample_fq);
if (size > len)
memmove(buffer, buffer + len, size - len);
@@ -1037,7 +960,7 @@
test_wavefile_read(fd, buffer, &size, sizeof(WaveChunkHeader), __LINE__);
c = (WaveChunkHeader*)buffer;
type = c->type;
- len = TO_CPU_INT(c->length, big_endian);
+ len = LE_INT(c->length);
if (size > sizeof(WaveChunkHeader))
memmove(buffer, buffer + sizeof(WaveChunkHeader), size - sizeof(WaveChunkHeader));
size -= sizeof(WaveChunkHeader);
@@ -1120,74 +1043,6 @@
}
}
-#ifdef CONFIG_SUPPORT_CHMAP
-static int setup_chmap(void)
-{
- snd_pcm_chmap_t *chmap = channel_map;
- char mapped[hwparams.channels];
- snd_pcm_chmap_t *hw_chmap;
- unsigned int ch, i;
- int err;
-
- if (!chmap)
- return 0;
-
- if (chmap->channels != hwparams.channels) {
- error(_("Channel numbers don't match between hw_params and channel map"));
- return -1;
- }
- err = snd_pcm_set_chmap(handle, chmap);
- if (!err)
- return 0;
-
- hw_chmap = snd_pcm_get_chmap(handle);
- if (!hw_chmap) {
- fprintf(stderr, _("Warning: unable to get channel map\n"));
- return 0;
- }
-
- if (hw_chmap->channels == chmap->channels &&
- !memcmp(hw_chmap, chmap, 4 * (chmap->channels + 1))) {
- /* maps are identical, so no need to convert */
- free(hw_chmap);
- return 0;
- }
-
- hw_map = calloc(hwparams.channels, sizeof(int));
- if (!hw_map) {
- error(_("not enough memory"));
- return -1;
- }
-
- memset(mapped, 0, sizeof(mapped));
- for (ch = 0; ch < hw_chmap->channels; ch++) {
- if (chmap->pos[ch] == hw_chmap->pos[ch]) {
- mapped[ch] = 1;
- hw_map[ch] = ch;
- continue;
- }
- for (i = 0; i < hw_chmap->channels; i++) {
- if (!mapped[i] && chmap->pos[ch] == hw_chmap->pos[i]) {
- mapped[i] = 1;
- hw_map[ch] = i;
- break;
- }
- }
- if (i >= hw_chmap->channels) {
- char buf[256];
- error(_("Channel %d doesn't match with hw_parmas"), ch);
- snd_pcm_chmap_print(hw_chmap, sizeof(buf), buf);
- fprintf(stderr, "hardware chmap = %s\n", buf);
- return -1;
- }
- }
- free(hw_chmap);
- return 0;
-}
-#else
-#define setup_chmap() 0
-#endif
-
static void set_params(void)
{
snd_pcm_hw_params_t *params;
@@ -1204,13 +1059,6 @@
error(_("Broken configuration for this PCM: no configurations available"));
prg_exit(EXIT_FAILURE);
}
- if (dump_hw_params) {
- fprintf(stderr, _("HW Params of device \"%s\":\n"),
- snd_pcm_name(handle));
- fprintf(stderr, "--------------------\n");
- snd_pcm_hw_params_dump(params, log);
- fprintf(stderr, "--------------------\n");
- }
if (mmap_flag) {
snd_pcm_access_mask_t *mask = alloca(snd_pcm_access_mask_sizeof());
snd_pcm_access_mask_none(mask);
@@ -1337,9 +1185,6 @@
prg_exit(EXIT_FAILURE);
}
- if (setup_chmap())
- prg_exit(EXIT_FAILURE);
-
if (verbose)
snd_pcm_dump(handle, log);
@@ -1385,10 +1230,6 @@
if (!interactive)
return;
- if (!isatty(fileno(stdin))) {
- interactive = 0;
- return;
- }
tcgetattr(fileno(stdin), &term);
term_c_lflag = term.c_lflag;
if (fd == fileno(stdin))
@@ -1495,12 +1336,6 @@
prg_exit(EXIT_FAILURE);
}
if (snd_pcm_status_get_state(status) == SND_PCM_STATE_XRUN) {
- if (fatal_errors) {
- error(_("fatal %s: %s"),
- stream == SND_PCM_STREAM_PLAYBACK ? _("underrun") : _("overrun"),
- snd_strerror(res));
- prg_exit(EXIT_FAILURE);
- }
if (monotonic) {
#ifdef HAVE_CLOCK_GETTIME
struct timespec now, diff, tstamp;
@@ -1591,9 +1426,9 @@
sprintf(line + val, "| MAX");
else
sprintf(line + val, "| %02i%%", maxperc);
- fputs(line, stderr);
+ fputs(line, stdout);
if (perc > 100)
- fprintf(stderr, _(" !clip "));
+ printf(_(" !clip "));
}
static void print_vu_meter_stereo(int *perc, int *maxperc)
@@ -1631,7 +1466,7 @@
memcpy(line + bar_length, tmp, 3);
}
line[bar_length * 2 + 6 + 2] = 0;
- fputs(line, stderr);
+ fputs(line, stdout);
}
static void print_vu_meter(signed int *perc, signed int *maxperc)
@@ -1769,9 +1604,9 @@
if (perc[c] > maxperc[c])
maxperc[c] = perc[c];
- putc('\r', stderr);
+ putchar('\r');
print_vu_meter(perc, maxperc);
- fflush(stderr);
+ fflush(stdout);
}
else if(verbose==3) {
printf(_("Max peak (%li samples): 0x%08x "), (long)ocount, max_peak[0]);
@@ -1780,8 +1615,8 @@
putchar('#');
else
putchar(' ');
- fprintf(stderr, " %i%%\n", perc[0]);
- fflush(stderr);
+ printf(" %i%%\n", perc[0]);
+ fflush(stdout);
}
}
@@ -1845,69 +1680,6 @@
}
/*
- */
-#ifdef CONFIG_SUPPORT_CHMAP
-static u_char *remap_data(u_char *data, size_t count)
-{
- static u_char *tmp, *src, *dst;
- static size_t tmp_size;
- size_t sample_bytes = bits_per_sample / 8;
- size_t step = bits_per_frame / 8;
- size_t chunk_bytes;
- unsigned int ch, i;
-
- if (!hw_map)
- return data;
-
- chunk_bytes = count * bits_per_frame / 8;
- if (tmp_size < chunk_bytes) {
- free(tmp);
- tmp = malloc(chunk_bytes);
- if (!tmp) {
- error(_("not enough memory"));
- exit(1);
- }
- tmp_size = count;
- }
-
- src = data;
- dst = tmp;
- for (i = 0; i < count; i++) {
- for (ch = 0; ch < hwparams.channels; ch++) {
- memcpy(dst, src + sample_bytes * hw_map[ch],
- sample_bytes);
- dst += sample_bytes;
- }
- src += step;
- }
- return tmp;
-}
-
-static u_char **remap_datav(u_char **data, size_t count)
-{
- static u_char **tmp;
- unsigned int ch;
-
- if (!hw_map)
- return data;
-
- if (!tmp) {
- tmp = malloc(sizeof(*tmp) * hwparams.channels);
- if (!tmp) {
- error(_("not enough memory"));
- exit(1);
- }
- for (ch = 0; ch < hwparams.channels; ch++)
- tmp[ch] = data[hw_map[ch]];
- }
- return tmp;
-}
-#else
-#define remap_data(data, count) (data)
-#define remap_datav(data, count) (data)
-#endif
-
-/*
* write function
*/
@@ -1920,7 +1692,6 @@
snd_pcm_format_set_silence(hwparams.format, data + count * bits_per_frame / 8, (chunk_size - count) * hwparams.channels);
count = chunk_size;
}
- data = remap_data(data, count);
while (count > 0) {
if (test_position)
do_test_position();
@@ -1963,7 +1734,6 @@
snd_pcm_format_set_silence(hwparams.format, data[channel] + offset * bits_per_sample / 8, remaining);
count = chunk_size;
}
- data = remap_datav(data, count);
while (count > 0) {
unsigned int channel;
void *bufs[channels];
@@ -2124,7 +1894,7 @@
return; /* not fatal error */
}
snd_pcm_format_set_silence(hwparams.format, buf, chunk_size * hwparams.channels);
- while (x > 0 && !in_aborting) {
+ while (x > 0) {
l = x;
if (l > chunk_size)
l = chunk_size;
@@ -2162,6 +1932,7 @@
u_char *data, *buf;
char was_extended = 0, output = 0;
u_short *sp, repeat = 0;
+ size_t silence;
off64_t filepos = 0;
#define COUNT(x) nextblock -= x; in_buffer -= x; data += x
@@ -2196,7 +1967,7 @@
set_params();
in_buffer = nextblock = 0;
- while (!in_aborting) {
+ while (1) {
Fill_the_buffer: /* need this for repeat */
if (in_buffer < 32) {
/* move the rest of buffer to pos 0 and fill the buf up */
@@ -2265,12 +2036,9 @@
COUNT1(1);
hwparams.rate = 1000000 / (256 - hwparams.rate);
set_params();
+ silence = (((size_t) * sp) * 1000) / hwparams.rate;
#if 0
- {
- size_t silence;
- silence = (((size_t) * sp) * 1000) / hwparams.rate;
- d_printf("Silence for %d ms\n", (int) silence);
- }
+ d_printf("Silence for %d ms\n", (int) silence);
#endif
voc_write_silence(*sp);
break;
@@ -2644,7 +2412,7 @@
header(rtype, name);
set_params();
- while (loaded > chunk_bytes && written < count && !in_aborting) {
+ while (loaded > chunk_bytes && written < count) {
if (pcm_write(audiobuf + written, chunk_size) <= 0)
return;
written += chunk_bytes;
@@ -2654,7 +2422,7 @@
memmove(audiobuf, audiobuf + written, loaded);
l = loaded;
- while (written < count && !in_aborting) {
+ while (written < count) {
do {
c = count - written;
if (c > chunk_bytes)
@@ -2704,7 +2472,7 @@
name = "stdin";
} else {
init_stdin();
- if ((fd = open(name, O_RDONLY, 0)) == -1) {
+ if ((fd = open64(name, O_RDONLY, 0)) == -1) {
perror(name);
prg_exit(EXIT_FAILURE);
}
@@ -2912,12 +2680,12 @@
{
int fd;
- fd = open(name, O_WRONLY | O_CREAT, 0644);
+ fd = open64(name, O_WRONLY | O_CREAT, 0644);
if (fd == -1) {
if (errno != ENOENT || !use_strftime)
return -1;
if (create_path(name) == 0)
- fd = open(name, O_WRONLY | O_CREAT, 0644);
+ fd = open64(name, O_WRONLY | O_CREAT, 0644);
}
return fd;
}
@@ -2994,7 +2762,7 @@
/* capture */
fdcount = 0;
- while (rest > 0 && recycle_capture_file == 0 && !in_aborting) {
+ while (rest > 0 && recycle_capture_file == 0) {
size_t c = (rest <= (off64_t)chunk_bytes) ?
(size_t)rest : chunk_bytes;
size_t f = c * 8 / bits_per_frame;
@@ -3021,9 +2789,6 @@
fd = -1;
}
- if (in_aborting)
- break;
-
/* repeat the loop when format is raw without timelimit or
* requested counts of data are recorded
*/
@@ -3049,7 +2814,7 @@
for (channel = 0; channel < channels; ++channel)
bufs[channel] = audiobuf + vsize * channel;
- while (count > 0 && !in_aborting) {
+ while (count > 0) {
size_t c = 0;
size_t expected = count / channels;
if (expected > vsize)
@@ -3098,7 +2863,7 @@
for (channel = 0; channel < channels; ++channel)
bufs[channel] = audiobuf + vsize * channel;
- while (count > 0 && !in_aborting) {
+ while (count > 0) {
size_t rv;
c = count;
if (c > chunk_bytes)
diff --git a/aplay/arecord.1 b/aplay/arecord.1
deleted file mode 100644
index 2945dad..0000000
--- a/aplay/arecord.1
+++ /dev/null
@@ -1,263 +0,0 @@
-.TH APLAY 1 "1 January 2010"
-.SH NAME
-arecord, aplay \- command\-line sound recorder and player for ALSA
-soundcard driver
-.SH SYNOPSIS
-\fBarecord\fP [\fIflags\fP] [filename]
-.br
-\fBaplay\fP [\fIflags\fP] [filename [filename]] ...
-
-.SH DESCRIPTION
-\fBarecord\fP is a command\-line soundfile recorder for the ALSA soundcard
-driver. It supports several file formats and multiple soundcards with
-multiple devices. If recording with interleaved mode samples the file is
-automatically split before the 2GB filesize.
-
-\fBaplay\fP is much the same, only it plays instead of recording. For
-supported soundfile formats, the sampling rate, bit depth, and so
-forth can be automatically determined from the soundfile header.
-
-If filename is not specified, the standard output or input is used. The \fBaplay\fP utility accepts multiple filenames.
-
-.SH OPTIONS
-.TP
-\fI\-h, \-\-help\fP
-Help: show syntax.
-.TP
-\fI\-\-version\fP
-Print current version.
-.TP
-\fI\-l, \-\-list\-devices\fP
-List all soundcards and digital audio devices
-.TP
-\fI\-L, \-\-list\-pcms\fP
-List all PCMs defined
-.TP
-\fI\-D, \-\-device=NAME\fP
-Select PCM by name
-.TP
-\fI\-q \-\-quiet\fP
-Quiet mode. Suppress messages (not sound :))
-.TP
-\fI\-t, \-\-file\-type TYPE\fP
-File type (voc, wav, raw or au).
-If this parameter is omitted the WAVE format is used.
-.TP
-\fI\-c, \-\-channels=#\fP
-The number of channels.
-The default is one channel.
-Valid values are 1 through 32.
-.TP
-\fI\-f \-\-format=FORMAT\fP
-Sample format
-.br
-Recognized sample formats are: S8 U8 S16_LE S16_BE U16_LE U16_BE S24_LE
-S24_BE U24_LE U24_BE S32_LE S32_BE U32_LE U32_BE FLOAT_LE FLOAT_BE
-FLOAT64_LE FLOAT64_BE IEC958_SUBFRAME_LE IEC958_SUBFRAME_BE MU_LAW
-A_LAW IMA_ADPCM MPEG GSM SPECIAL S24_3LE S24_3BE U24_3LE U24_3BE S20_3LE
-S20_3BE U20_3LE U20_3BE S18_3LE S18_3BE U18_3LE
-.br
-Some of these may not be available on selected hardware
-.br
-The available format shortcuts are:
-.nf
-\-f cd (16 bit little endian, 44100, stereo) [\-f S16_LE \-c2 \-r44100]
-\-f cdr (16 bit big endian, 44100, stereo) [\-f S16_BE \-c2 \-f44100]
-\-f dat (16 bit little endian, 48000, stereo) [\-f S16_LE \-c2 \-r48000]
-.fi
-If no format is given U8 is used.
-.TP
-\fI\-r, \-\-rate=#<Hz>\fP
-Sampling rate in Hertz. The default rate is 8000 Hertz.
-If the value specified is less than 300, it is taken as the rate in kilohertz.
-Valid values are 2000 through 192000 Hertz.
-.TP
-\fI\-d, \-\-duration=#\fP
-Interrupt after # seconds.
-A value of zero means infinity.
-The default is zero, so if this option is omitted then the arecord process will run until it is killed.
-.TP
-\fI\-s, \-\-sleep\-min=#\fP
-Min ticks to sleep. The default is not to sleep.
-.TP
-\fI\-M, \-\-mmap\fP
-Use memory\-mapped (mmap) I/O mode for the audio stream.
-If this option is not set, the read/write I/O mode will be used.
-.TP
-\fI\-N, \-\-nonblock\fP
-Open the audio device in non\-blocking mode. If the device is busy the program will exit immediately.
-If this option is not set the program will block until the audio device is available again.
-.TP
-\fI\-F, \-\-period\-time=#\fP
-Distance between interrupts is # microseconds.
-If no period time and no period size is given then a quarter of the buffer time is set.
-.TP
-\fI\-B, \-\-buffer\-time=#\fP
-Buffer duration is # microseconds
-If no buffer time and no buffer size is given then the maximal allowed buffer time but not more than 500ms is set.
-.TP
-\fI\-\-period\-size=#\fP
-Distance between interrupts is # frames
-If no period size and no period time is given then a quarter of the buffer size is set.
-.TP
-\fI\-\-buffer\-size=#\fP
-Buffer duration is # frames
-If no buffer time and no buffer size is given then the maximal allowed buffer time but not more than 500ms is set.
-.TP
-\fI\-A, \-\-avail\-min=#\fP
-Min available space for wakeup is # microseconds
-.TP
-\fI\-R, \-\-start\-delay=#\fP
-Delay for automatic PCM start is # microseconds
-(relative to buffer size if <= 0)
-.TP
-\fI\-T, \-\-stop\-delay=#\fP
-Delay for automatic PCM stop is # microseconds from xrun
-.TP
-\fI\-v, \-\-verbose\fP
-Show PCM structure and setup.
-This option is accumulative. The VU meter is displayed when this
-is given twice or three times.
-.TP
-\fI\-V, \-\-vumeter=TYPE\fP
-Specifies the VU\-meter type, either \fIstereo\fP or \fImono\fP.
-The stereo VU\-meter is available only for 2\-channel stereo samples
-with interleaved format.
-.TP
-\fI\-I, \-\-separate\-channels\fP
-One file for each channel. This option disables max\-file\-time
-and use\-strftime, and ignores SIGUSR1. The stereo VU meter is
-not available with separate channels.
-.TP
-\fI\-P\fP
-Playback. This is the default if the program is invoked
-by typing aplay.
-.TP
-\fI\-C\fP
-Record. This is the default if the program is invoked
-by typing arecord.
-.TP
-\fI\-i, \-\-interactive\fP
-Allow interactive operation via stdin.
-Currently only pause/resume via space or enter key is implemented.
-.TP
-\fI-m, \-\-chmap=ch1,ch2,...\fP
-Give the channel map to override or follow. Pass channel position
-strings like \fIFL\fP, \fIFR\fP, etc.
-
-If a device supports the override of the channel map, \fBaplay\fP
-tries to pass the given channel map.
-If it doesn't support the channel map override but still it provides
-the channel map information, \fBaplay\fP tries to rearrange the
-channel order in the buffer to match with the returned channel map
-from the device.
-.TP
-\fI\-\-disable\-resample\fP
-Disable automatic rate resample.
-.TP
-\fI\-\-disable\-channels\fP
-Disable automatic channel conversions.
-.TP
-\fI\-\-disable\-format\fP
-Disable automatic format conversions.
-.TP
-\fI\-\-disable\-softvol\fP
-Disable software volume control (softvol).
-.TP
-\fI\-\-test\-position\fP
-Test ring buffer position.
-.TP
-\fI\-\-test\-coef=<coef>\fP
-Test coefficient for ring buffer position; default is 8.
-Expression for validation is: coef * (buffer_size / 2).
-Minimum value is 1.
-.TP
-\fI\-\-test\-nowait\fP
-Do not wait for the ring buffer \(hy eats the whole CPU.
-.TP
-\fI\-\-max\-file\-time\fP
-While recording, when the output file has been accumulating
-sound for this long,
-close it and open a new output file. Default is the maximum
-size supported by the file format: 2 GiB for WAV files.
-This option has no effect if \-\-separate\-channels is
-specified.
-.TP
-\fI\-\-process\-id\-file <file name>\fP
-aplay writes its process ID here, so other programs can
-send signals to it.
-.TP
-\fI\-\-use\-strftime\fP
-When recording, interpret %\-codes in the file name parameter using
-the strftime facility whenever the output file is opened. The
-important strftime codes are: %Y is the year, %m month, %d day of
-the month, %H hour, %M minute and %S second. In addition, %v is
-the file number, starting at 1. When this option is specified,
-intermediate directories for the output file are created automatically.
-This option has no effect if \-\-separate\-channels is specified.
-.TP
-\fI\-\-dump\-hw\-params\fP
-Dump hw_params of the device preconfigured status to stderr. The dump
-lists capabilities of the selected device such as supported formats,
-sampling rates, numbers of channels, period and buffer bytes/sizes/times.
-For raw device hw:X this option basically lists hardware capabilities of
-the soundcard.
-.TP
-\fI\-\-fatal\-errors\fP
-Disables recovery attempts when errors (e.g. xrun) are encountered; the
-aplay process instead aborts immediately.
-
-.SH SIGNALS
-When recording, SIGINT, SIGTERM and SIGABRT will close the output
-file and exit. SIGUSR1 will close the output file, open a new one,
-and continue recording. However, SIGUSR1 does not work with
-\-\-separate\-channels.
-
-.SH EXAMPLES
-
-.TP
-\fBaplay \-c 1 \-t raw \-r 22050 \-f mu_law foobar\fR
-will play the raw file "foobar" as a
-22050\-Hz, mono, 8\-bit, Mu\-Law .au file.
-
-.TP
-\fBarecord \-d 10 \-f cd \-t wav \-D copy foobar.wav\fP
-will record foobar.wav as a 10\-second, CD\-quality wave file, using the
-PCM "copy" (which might be defined in the user's .asoundrc file as:
-.nf
-pcm.copy {
- type plug
- slave {
- pcm hw
- }
- route_policy copy
-}
-.fi
-
-.TP
-\fBarecord \-t wav \-\-max\-file\-time 30 mon.wav\fP
-Record from the default audio source in monaural, 8,000 samples
-per second, 8 bits per sample. Start a new file every
-30 seconds. File names are mon\-nn.wav, where nn increases
-from 01. The file after mon\-99.wav is mon\-100.wav.
-
-.TP
-\fBarecord \-f cd \-t wav \-\-max\-file\-time 3600 \-\-use-strftime %Y/%m/%d/listen-%H-%M-%v.wav\fP
-Record in stereo from the default audio source. Create a new file
-every hour. The files are placed in directories based on their start dates
-and have names which include their start times and file numbers.
-
-.SH SEE ALSO
-\fB
-alsamixer(1),
-amixer(1)
-\fP
-
-.SH BUGS
-Note that .aiff files are not currently supported.
-
-.SH AUTHOR
-\fBarecord\fP and \fBaplay\fP are by Jaroslav Kysela <perex@perex.cz>
-This document is by Paul Winkler <zarmzarm@erols.com>.
-Updated for Alsa 0.9 by James Tappin <james@xena.uklinux.net>
-
diff --git a/aplay/formats.h b/aplay/formats.h
index ac0a2b0..b5314f9 100644
--- a/aplay/formats.h
+++ b/aplay/formats.h
@@ -60,14 +60,7 @@
#error "Wrong endian"
#endif
-/* Note: the following macros evaluate the parameter v twice */
-#define TO_CPU_SHORT(v, be) \
- ((be) ? BE_SHORT(v) : LE_SHORT(v))
-#define TO_CPU_INT(v, be) \
- ((be) ? BE_INT(v) : LE_INT(v))
-
#define WAV_RIFF COMPOSE_ID('R','I','F','F')
-#define WAV_RIFX COMPOSE_ID('R','I','F','X')
#define WAV_WAVE COMPOSE_ID('W','A','V','E')
#define WAV_FMT COMPOSE_ID('f','m','t',' ')
#define WAV_DATA COMPOSE_ID('d','a','t','a')
diff --git a/config.guess b/config.guess
deleted file mode 100755
index c0adba9..0000000
--- a/config.guess
+++ /dev/null
@@ -1,1530 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-06-10'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner. Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ELF__
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
- exitcode=$?
- trap '' 0
- exit $exitcode ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
- echo i386-pc-auroraux${UNAME_RELEASE}
- exit ;;
- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
- # If there is a compiler, see if it is configured for 64-bit objects.
- # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
- # This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- SUN_ARCH="x86_64"
- fi
- fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[4567])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep -q __LP64__
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- case ${UNAME_PROCESSOR} in
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:MSYS*:*)
- echo ${UNAME_MACHINE}-pc-msys
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- *:Interix*:*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- authenticamd | genuineintel | EM64T)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- aarch64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- aarch64_be:Linux:*:*)
- UNAME_MACHINE=aarch64_be
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
- arm*:Linux:*:*)
- eval $set_cc_for_build
- if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_EABI__
- then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- else
- if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_PCS_VFP
- then
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
- else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
- fi
- fi
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- hexagon:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- LIBC=gnu
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:* | mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef ${UNAME_MACHINE}
- #undef ${UNAME_MACHINE}el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=${UNAME_MACHINE}el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=${UNAME_MACHINE}
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- padre:Linux:*:*)
- echo sparc-unknown-linux-gnu
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- tile*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i586.
- # Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
- # this is a cross-build.
- echo i586-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- NCR*:*:4.2:* | MPRAS*:*:4.2:*)
- OS_REL='.3'
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
- echo i586-pc-haiku
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- i386)
- eval $set_cc_for_build
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- UNAME_PROCESSOR="x86_64"
- fi
- fi ;;
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NEO-?:NONSTOP_KERNEL:*:*)
- echo neo-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSE-*:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
- i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
- exit ;;
- x86_64:VMkernel:*:*)
- echo ${UNAME_MACHINE}-unknown-esx
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/config.rpath b/config.rpath
deleted file mode 100755
index 17298f2..0000000
--- a/config.rpath
+++ /dev/null
@@ -1,672 +0,0 @@
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-# Copyright 1996-2010 Free Software Foundation, Inc.
-# Taken from GNU libtool, 2001
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-# than 256 bytes, otherwise the compiler driver will dump core. The only
-# known workaround is to choose shorter directory names for the build
-# directory and/or the installation directory.
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's _LT_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
- wl='-Wl,'
-else
- case "$host_os" in
- aix*)
- wl='-Wl,'
- ;;
- darwin*)
- case $cc_basename in
- xlc*)
- wl='-Wl,'
- ;;
- esac
- ;;
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- ;;
- hpux9* | hpux10* | hpux11*)
- wl='-Wl,'
- ;;
- irix5* | irix6* | nonstopux*)
- wl='-Wl,'
- ;;
- newsos6)
- ;;
- linux* | k*bsd*-gnu)
- case $cc_basename in
- ecc*)
- wl='-Wl,'
- ;;
- icc* | ifort*)
- wl='-Wl,'
- ;;
- lf95*)
- wl='-Wl,'
- ;;
- pgcc | pgf77 | pgf90)
- wl='-Wl,'
- ;;
- ccc*)
- wl='-Wl,'
- ;;
- como)
- wl='-lopt='
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- wl='-Wl,'
- ;;
- esac
- ;;
- esac
- ;;
- osf3* | osf4* | osf5*)
- wl='-Wl,'
- ;;
- rdos*)
- ;;
- solaris*)
- wl='-Wl,'
- ;;
- sunos4*)
- wl='-Qoption ld '
- ;;
- sysv4 | sysv4.2uw2* | sysv4.3*)
- wl='-Wl,'
- ;;
- sysv4*MP*)
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- wl='-Wl,'
- ;;
- unicos*)
- wl='-Wl,'
- ;;
- uts4*)
- ;;
- esac
-fi
-
-# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- case "$host_os" in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- fi
- ;;
- amigaos*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we cannot use
- # them.
- ld_shlibs=no
- ;;
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- interix[3-9]*)
- hardcode_direct=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- netbsd*)
- ;;
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
- sunos4*)
- hardcode_direct=yes
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- esac
- if test "$ld_shlibs" = no; then
- hardcode_libdir_flag_spec=
- fi
-else
- case "$host_os" in
- aix3*)
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- else
- aix_use_runtimelinking=no
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
- fi
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- fi
- # Begin _LT_AC_SYS_LIBPATH_AIX.
- echo 'int main () { return 0; }' > conftest.c
- ${CC} ${LDFLAGS} conftest.c -o conftest
- aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- fi
- if test -z "$aix_libpath"; then
- aix_libpath="/usr/lib:/lib"
- fi
- rm -f conftest.c conftest
- # End _LT_AC_SYS_LIBPATH_AIX.
- if test "$aix_use_runtimelinking" = yes; then
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- else
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- fi
- fi
- ;;
- amigaos*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- # see comment about different semantics on the GNU ld section
- ld_shlibs=no
- ;;
- bsdi[45]*)
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- libext=lib
- ;;
- darwin* | rhapsody*)
- hardcode_direct=no
- if test "$GCC" = yes ; then
- :
- else
- case $cc_basename in
- xlc*)
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
- fi
- ;;
- dgux*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- freebsd1*)
- ld_shlibs=no
- ;;
- freebsd2.2*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- freebsd2*)
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- freebsd* | dragonfly*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- hpux9*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- hpux10*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
- hpux11*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct=no
- ;;
- *)
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
- irix5* | irix6* | nonstopux*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- netbsd*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- newsos6)
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- else
- case "$host_os" in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- osf3*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- osf4* | osf5*)
- if test "$GCC" = yes; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- # Both cc and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
- solaris*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- sunos4*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- sysv4)
- case $host_vendor in
- sni)
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- hardcode_direct=no
- ;;
- motorola)
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- ;;
- sysv4.3*)
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- ld_shlibs=yes
- fi
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- ;;
- uts4*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec= # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
- aix3*)
- library_names_spec='$libname.a'
- ;;
- aix[4-9]*)
- library_names_spec='$libname$shrext'
- ;;
- amigaos*)
- library_names_spec='$libname.a'
- ;;
- beos*)
- library_names_spec='$libname$shrext'
- ;;
- bsdi[45]*)
- library_names_spec='$libname$shrext'
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- shrext=.dll
- library_names_spec='$libname.dll.a $libname.lib'
- ;;
- darwin* | rhapsody*)
- shrext=.dylib
- library_names_spec='$libname$shrext'
- ;;
- dgux*)
- library_names_spec='$libname$shrext'
- ;;
- freebsd1*)
- ;;
- freebsd* | dragonfly*)
- case "$host_os" in
- freebsd[123]*)
- library_names_spec='$libname$shrext$versuffix' ;;
- *)
- library_names_spec='$libname$shrext' ;;
- esac
- ;;
- gnu*)
- library_names_spec='$libname$shrext'
- ;;
- hpux9* | hpux10* | hpux11*)
- case $host_cpu in
- ia64*)
- shrext=.so
- ;;
- hppa*64*)
- shrext=.sl
- ;;
- *)
- shrext=.sl
- ;;
- esac
- library_names_spec='$libname$shrext'
- ;;
- interix[3-9]*)
- library_names_spec='$libname$shrext'
- ;;
- irix5* | irix6* | nonstopux*)
- library_names_spec='$libname$shrext'
- case "$host_os" in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
- *) libsuff= shlibsuff= ;;
- esac
- ;;
- esac
- ;;
- linux*oldld* | linux*aout* | linux*coff*)
- ;;
- linux* | k*bsd*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- knetbsd*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- netbsd*)
- library_names_spec='$libname$shrext'
- ;;
- newsos6)
- library_names_spec='$libname$shrext'
- ;;
- nto-qnx*)
- library_names_spec='$libname$shrext'
- ;;
- openbsd*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- os2*)
- libname_spec='$name'
- shrext=.dll
- library_names_spec='$libname.a'
- ;;
- osf3* | osf4* | osf5*)
- library_names_spec='$libname$shrext'
- ;;
- rdos*)
- ;;
- solaris*)
- library_names_spec='$libname$shrext'
- ;;
- sunos4*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- sysv4 | sysv4.3*)
- library_names_spec='$libname$shrext'
- ;;
- sysv4*MP*)
- library_names_spec='$libname$shrext'
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- library_names_spec='$libname$shrext'
- ;;
- uts4*)
- library_names_spec='$libname$shrext'
- ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF
diff --git a/config.sub b/config.sub
deleted file mode 100755
index 6205f84..0000000
--- a/config.sub
+++ /dev/null
@@ -1,1782 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-04-18'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
- linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- android-linux)
- os=-linux-android
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray | -microblaze)
- os=
- basic_machine=$1
- ;;
- -bluegene*)
- os=-cnk
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*178)
- os=-lynxos178
- ;;
- -lynx*5)
- os=-lynxos5
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | aarch64 | aarch64_be \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | be32 | be64 \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | epiphany \
- | fido | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | hexagon \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | le32 | le64 \
- | lm32 \
- | m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep | metag \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64octeon | mips64octeonel \
- | mips64orion | mips64orionel \
- | mips64r5900 | mips64r5900el \
- | mips64vr | mips64vrel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | moxie \
- | mt \
- | msp430 \
- | nds32 | nds32le | nds32be \
- | nios | nios2 \
- | ns16k | ns32k \
- | open8 \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle \
- | pyramid \
- | rl78 | rx \
- | score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu \
- | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
- | ubicom32 \
- | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
- | we32k \
- | x86 | xc16x | xstormy16 | xtensa \
- | z8k | z80)
- basic_machine=$basic_machine-unknown
- ;;
- c54x)
- basic_machine=tic54x-unknown
- ;;
- c55x)
- basic_machine=tic55x-unknown
- ;;
- c6x)
- basic_machine=tic6x-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- strongarm | thumb | xscale)
- basic_machine=arm-unknown
- ;;
- xgate)
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- xscaleeb)
- basic_machine=armeb-unknown
- ;;
-
- xscaleel)
- basic_machine=armel-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | aarch64-* | aarch64_be-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* | avr32-* \
- | be32-* | be64-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | hexagon-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | le32-* | le64-* \
- | lm32-* \
- | m32c-* | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64octeon-* | mips64octeonel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64r5900-* | mips64r5900el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nds32-* | nds32le-* | nds32be-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | open8-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
- | pyramid-* \
- | rl78-* | romp-* | rs6000-* | rx-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
- | tahoe-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tile*-* \
- | tron-* \
- | ubicom32-* \
- | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
- | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* \
- | xstormy16-* | xtensa*-* \
- | ymp-* \
- | z8k-* | z80-*)
- ;;
- # Recognize the basic CPU types without company name, with glob match.
- xtensa*)
- basic_machine=$basic_machine-unknown
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aros)
- basic_machine=i386-pc
- os=-aros
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- blackfin)
- basic_machine=bfin-unknown
- os=-linux
- ;;
- blackfin-*)
- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- bluegene*)
- basic_machine=powerpc-ibm
- os=-cnk
- ;;
- c54x-*)
- basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- c55x-*)
- basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- c6x-*)
- basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- cegcc)
- basic_machine=arm-unknown
- os=-cegcc
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16 | cr16-*)
- basic_machine=cr16-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dicos)
- basic_machine=i686-pc
- os=-dicos
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m68knommu)
- basic_machine=m68k-unknown
- os=-linux
- ;;
- m68knommu-*)
- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- microblaze)
- basic_machine=microblaze-xilinx
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- mingw32ce)
- basic_machine=arm-unknown
- os=-mingw32ce
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- msys)
- basic_machine=i386-pc
- os=-msys
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- nacl)
- basic_machine=le32-unknown
- os=-nacl
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- neo-tandem)
- basic_machine=neo-tandem
- ;;
- nse-tandem)
- basic_machine=nse-tandem
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- parisc)
- basic_machine=hppa-unknown
- os=-linux
- ;;
- parisc-*)
- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc | ppcbe) basic_machine=powerpc-unknown
- ;;
- ppc-* | ppcbe-*)
- basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh5el)
- basic_machine=sh5le-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- strongarm-* | thumb-*)
- basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tile*)
- basic_machine=$basic_machine-unknown
- os=-linux-gnu
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- xscale-* | xscalee[bl]-*)
- basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- z80-*-coff)
- basic_machine=z80-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -auroraux)
- os=-auroraux
- ;;
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
- | -sym* | -kopensolaris* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* \
- | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-android* \
- | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -dicos*)
- os=-dicos
- ;;
- -nacl*)
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- score-*)
- os=-elf
- ;;
- spu-*)
- os=-elf
- ;;
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- hexagon-*)
- os=-elf
- ;;
- tic54x-*)
- os=-coff
- ;;
- tic55x-*)
- os=-coff
- ;;
- tic6x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mep-*)
- os=-elf
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -cnk*|-aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/configure b/configure
deleted file mode 100755
index a635dab..0000000
--- a/configure
+++ /dev/null
@@ -1,10696 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
-
-ac_unique_file="aplay/aplay.c"
-ac_default_prefix=/usr
-gt_needs=
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
-LIBOBJS
-ALSACTL_DAEMONSWITCH
-ALSACTL_PIDFILE_DIR
-ASOUND_STATE_DIR
-HAVE_SYSTEMD_FALSE
-HAVE_SYSTEMD_TRUE
-systemdsystemunitdir
-LIBRT
-SND_UTIL_SUBMINOR
-SND_UTIL_MINOR
-SND_UTIL_MAJOR
-SND_UTIL_VERSION
-TESTSOUND
-CURSES_CFLAGS
-CURSESLIB
-CURSESINC
-ncurses5_config
-NCURSES_LIBS
-NCURSES_CFLAGS
-ncursesw5_config
-NCURSESW_LIBS
-NCURSESW_CFLAGS
-udevrulesdir
-USE_XMLTO_FALSE
-USE_XMLTO_TRUE
-xmlto
-ALSALOOP_FALSE
-ALSALOOP_TRUE
-ALSACONF_FALSE
-ALSACONF_TRUE
-ALSAMIXER_FALSE
-ALSAMIXER_TRUE
-HAVE_SAMPLERATE_FALSE
-HAVE_SAMPLERATE_TRUE
-HAVE_SEQ_FALSE
-HAVE_SEQ_TRUE
-HAVE_RAWMIDI_FALSE
-HAVE_RAWMIDI_TRUE
-HAVE_MIXER_FALSE
-HAVE_MIXER_TRUE
-HAVE_PCM_FALSE
-HAVE_PCM_TRUE
-ALSA_LIBS
-ALSA_CFLAGS
-PKG_CONFIG_LIBDIR
-PKG_CONFIG_PATH
-PKG_CONFIG
-SED
-LN_S
-POSUB
-LTLIBINTL
-LIBINTL
-INTLLIBS
-LTLIBICONV
-LIBICONV
-INTL_MACOSX_LIBS
-EGREP
-GREP
-CPP
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-XGETTEXT_EXTRA_OPTIONS
-MSGMERGE
-XGETTEXT_015
-XGETTEXT
-GMSGFMT_015
-MSGFMT_015
-GMSGFMT
-MSGFMT
-GETTEXT_MACRO_VERSION
-USE_NLS
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_maintainer_mode
-enable_nls
-enable_dependency_tracking
-with_gnu_ld
-enable_rpath
-with_libiconv_prefix
-with_libintl_prefix
-with_alsa_prefix
-with_alsa_inc_prefix
-enable_alsatest
-with_librt
-enable_alsamixer
-enable_alsaconf
-enable_alsaloop
-enable_xmlto
-with_udev_rules_dir
-with_curses
-with_testsound
-enable_largefile
-with_systemdsystemunitdir
-with_asound_state_dir
-with_alsactl_pidfile_dir
-with_alsactl_daemonswitch
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP
-PKG_CONFIG
-PKG_CONFIG_PATH
-PKG_CONFIG_LIBDIR
-NCURSESW_CFLAGS
-NCURSESW_LIBS
-NCURSES_CFLAGS
-NCURSES_LIBS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-maintainer-mode
- disable make rules and dependencies not useful (and
- sometimes confusing) to the casual installer
- --disable-nls do not use Native Language Support
- --enable-dependency-tracking
- do not reject slow dependency extractors
- --disable-dependency-tracking
- speeds up one-time build
- --disable-rpath do not hardcode runtime library paths
- --disable-alsatest Do not try to compile and run a test Alsa program
- --disable-alsamixer Disable alsamixer compilation
- --disable-alsaconf Disable alsaconf packaging
- --disable-alsaloop Disable alsaloop packaging
- --disable-xmlto Disable man page creation via xmlto
- --disable-largefile omit support for large files
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld default=no
- --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
- --without-libiconv-prefix don't search for libiconv in includedir and libdir
- --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
- --without-libintl-prefix don't search for libintl in includedir and libdir
- --with-alsa-prefix=PFX Prefix where Alsa library is installed(optional)
- --with-alsa-inc-prefix=PFX Prefix where include libraries are (optional)
- --with-librt Use librt for monotonic clock (default = yes)
- --with-udev-rules-dir Directory where to install udev rules to (defaults
- to /lib/udev/rules.d)
- --with-curses=libname Specify the curses library to use (default=auto)
- --with-testsound=file give the path of test sound file for alsaconf
- --with-systemdsystemunitdir=DIR
- Directory for systemd service files
- --with-asound-state-dir=DIR
- Directory to place asound.state file in
- --with-alsactl-pidfile-dir=DIR
- Directory to place alsactl.pid file in
- --with-alsactl-daemonswitch=FILE
- File to test for the daemon mode
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
- PKG_CONFIG path to pkg-config utility
- PKG_CONFIG_PATH
- directories to add to pkg-config's search path
- PKG_CONFIG_LIBDIR
- path overriding pkg-config's built-in search path
- NCURSESW_CFLAGS
- C compiler flags for NCURSESW, overriding pkg-config
- NCURSESW_LIBS
- linker flags for NCURSESW, overriding pkg-config
- NCURSES_CFLAGS
- C compiler flags for NCURSES, overriding pkg-config
- NCURSES_LIBS
- linker flags for NCURSES, overriding pkg-config
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval \${$3+:} false; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_header_compiler=yes
-else
- ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- ac_header_preproc=yes
-else
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
- yes:no: )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
- no:yes:* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
-esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_mongrel
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-gt_needs="$gt_needs "
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-am__api_version='1.12'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
- alias in your environment" "$LINENO" 5
- fi
- if test "$2" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-
-rm -f conftest.file
-
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
- done
-IFS=$as_save_IFS
-
-fi
-
- test -d ./--version && rmdir ./--version
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
-
- PACKAGE=alsa-utils
- VERSION=1.0.27.2
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-mkdir_p='$(MKDIR_P)'
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
- # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=yes
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
- if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
-else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
-fi
-
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
-$as_echo_n "checking whether NLS is requested... " >&6; }
- # Check whether --enable-nls was given.
-if test "${enable_nls+set}" = set; then :
- enableval=$enable_nls; USE_NLS=$enableval
-else
- USE_NLS=yes
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
-
-
-
-
- GETTEXT_MACRO_VERSION=0.18
-
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$MSGFMT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
- ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test "$MSGFMT" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GMSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GMSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XGETTEXT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$XGETTEXT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test "$XGETTEXT" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- rm -f messages.po
-
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgmerge", so it can be a program name with args.
-set dummy msgmerge; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGMERGE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$MSGMERGE" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
- ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
- ;;
-esac
-fi
-MSGMERGE="$ac_cv_path_MSGMERGE"
-if test "$MSGMERGE" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
-$as_echo "$MSGMERGE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$localedir" || localedir='${datadir}/locale'
-
-
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
-
-
- ac_config_commands="$ac_config_commands po-directories"
-
-
-
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-if test -z "$ac_file"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${acl_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${acl_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if ${acl_cv_rpath+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-
-
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
-$as_echo_n "checking for 64-bit host... " >&6; }
-if ${gl_cv_solaris_64bit+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef _LP64
-sixtyfour bits
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
- gl_cv_solaris_64bit=yes
-else
- gl_cv_solaris_64bit=no
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
-$as_echo "$gl_cv_solaris_64bit" >&6; }
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-
-
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then :
- withval=$with_libiconv_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-
-fi
-
- LIBICONV=
- LTLIBICONV=
- INCICONV=
- LIBICONV_PREFIX=
- HAVE_LIBICONV=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='iconv '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$acl_hardcode_direct" = yes; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
-$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
-if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <CoreFoundation/CFPreferences.h>
-int
-main ()
-{
-CFPreferencesCopyAppValue(NULL, NULL)
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gt_cv_func_CFPreferencesCopyAppValue=yes
-else
- gt_cv_func_CFPreferencesCopyAppValue=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
-$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
-
-$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
-
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
-$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
-if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <CoreFoundation/CFLocale.h>
-int
-main ()
-{
-CFLocaleCopyCurrent();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gt_cv_func_CFLocaleCopyCurrent=yes
-else
- gt_cv_func_CFLocaleCopyCurrent=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
-$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
-
-$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
-
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
-
-
-
-
-
-
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
-
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
-$as_echo_n "checking for GNU gettext in libc... " >&6; }
-if eval \${$gt_func_gnugettext_libc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$gt_func_gnugettext_libc=yes"
-else
- eval "$gt_func_gnugettext_libc=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$gt_func_gnugettext_libc
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
-
-
-
-
-
- am_save_CPPFLAGS="$CPPFLAGS"
-
- for element in $INCICONV; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if ${am_cv_func_iconv+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
- if test "$am_cv_func_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
-$as_echo_n "checking for working iconv... " >&6; }
-if ${am_cv_func_iconv_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- if test "$cross_compiling" = yes; then :
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- am_cv_func_iconv_works=yes
-else
- am_cv_func_iconv_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- LIBS="$am_save_LIBS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
-$as_echo "$am_cv_func_iconv_works" >&6; }
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
- fi
- if test "$am_cv_lib_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
- else
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
-
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libintl-prefix was given.
-if test "${with_libintl_prefix+set}" = set; then :
- withval=$with_libintl_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-
-fi
-
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- LIBINTL_PREFIX=
- HAVE_LIBINTL=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='intl '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$acl_hardcode_direct" = yes; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
-$as_echo_n "checking for GNU gettext in libintl... " >&6; }
-if eval \${$gt_func_gnugettext_libintl+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$gt_func_gnugettext_libintl=yes"
-else
- eval "$gt_func_gnugettext_libintl=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"
-fi
-eval ac_res=\$$gt_func_gnugettext_libintl
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- fi
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
-
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
-
-$as_echo "#define ENABLE_NLS 1" >>confdefs.h
-
- else
- USE_NLS=no
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
-$as_echo_n "checking whether to use NLS... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
- if test "$USE_NLS" = "yes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
-$as_echo_n "checking where the gettext function comes from... " >&6; }
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
-$as_echo "$gt_source" >&6; }
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
-$as_echo_n "checking how to link with libintl... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
-$as_echo "$LIBINTL" >&6; }
-
- for element in $INCINTL; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
- fi
-
-
-$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
-
- fi
-
- POSUB=po
- fi
-
-
-
- INTLLIBS="$LIBINTL"
-
-
-
-
-
-
-
-
-
-if test "x$target" != "x$host" -a -z "`echo $CC | grep -e '-gcc'`";
-then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cross-compiler" >&5
-$as_echo_n "checking for cross-compiler... " >&6; }
-
- which ${program_prefix}gcc >/dev/null 2>&1 && CC=${program_prefix}gcc
- which ${target_cpu}-${target_os}-gcc >/dev/null 2>&1 \
- && CC=${target_cpu}-${target-os}-gcc
- which ${target_cpu}-${target_vendor}-${target_os}-gcc >/dev/null 2>&1 \
- && CC=${target_cpu}-${target_vendor}-${target_os}-gcc
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
- for ac_i in 1 2 3 4 5 6 7; do
- ac_script="$ac_script$as_nl$ac_script"
- done
- echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
- { ac_script=; unset ac_script;}
- if test -z "$SED"; then
- ac_path_SED_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_SED" || continue
-# Check for GNU ac_path_SED and select it if it is found.
- # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
- ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo '' >> "conftest.nl"
- "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_SED_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_SED="$ac_path_SED"
- ac_path_SED_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_SED_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_SED"; then
- as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
- fi
-else
- ac_cv_path_SED=$SED
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
- rm -f conftest.sed
-
-
-
-
-
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
- ac_pt_PKG_CONFIG=$PKG_CONFIG
- # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_PKG_CONFIG" = x; then
- PKG_CONFIG=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- PKG_CONFIG=$ac_pt_PKG_CONFIG
- fi
-else
- PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=0.9.0
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- PKG_CONFIG=""
- fi
-fi
-alsa_save_CFLAGS="$CFLAGS"
-alsa_save_LDFLAGS="$LDFLAGS"
-alsa_save_LIBS="$LIBS"
-alsa_found=yes
-
-
-# Check whether --with-alsa-prefix was given.
-if test "${with_alsa_prefix+set}" = set; then :
- withval=$with_alsa_prefix; alsa_prefix="$withval"
-else
- alsa_prefix=""
-fi
-
-
-
-# Check whether --with-alsa-inc-prefix was given.
-if test "${with_alsa_inc_prefix+set}" = set; then :
- withval=$with_alsa_inc_prefix; alsa_inc_prefix="$withval"
-else
- alsa_inc_prefix=""
-fi
-
-
-# Check whether --enable-alsatest was given.
-if test "${enable_alsatest+set}" = set; then :
- enableval=$enable_alsatest; enable_alsatest="$enableval"
-else
- enable_alsatest=yes
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA CFLAGS" >&5
-$as_echo_n "checking for ALSA CFLAGS... " >&6; }
-if test "$alsa_inc_prefix" != "" ; then
- ALSA_CFLAGS="$ALSA_CFLAGS -I$alsa_inc_prefix"
- CFLAGS="$CFLAGS -I$alsa_inc_prefix"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ALSA_CFLAGS" >&5
-$as_echo "$ALSA_CFLAGS" >&6; }
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA LDFLAGS" >&5
-$as_echo_n "checking for ALSA LDFLAGS... " >&6; }
-if test "$alsa_prefix" != "" ; then
- ALSA_LIBS="$ALSA_LIBS -L$alsa_prefix"
- LDFLAGS="$LDFLAGS $ALSA_LIBS"
-fi
-
-ALSA_LIBS="$ALSA_LIBS -lasound -lm -ldl -lpthread"
-LIBS="$ALSA_LIBS $LIBS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ALSA_LIBS" >&5
-$as_echo "$ALSA_LIBS" >&6; }
-
-if test "x$enable_alsatest" = "xyes"; then
-min_alsa_version=1.0.27
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libasound headers version >= $min_alsa_version" >&5
-$as_echo_n "checking for libasound headers version >= $min_alsa_version... " >&6; }
-no_alsa=""
- alsa_min_major_version=`echo $min_alsa_version | \
- sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
- alsa_min_minor_version=`echo $min_alsa_version | \
- sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
- alsa_min_micro_version=`echo $min_alsa_version | \
- sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <alsa/asoundlib.h>
-
-int
-main ()
-{
-
-/* ensure backward compatibility */
-#if !defined(SND_LIB_MAJOR) && defined(SOUNDLIB_VERSION_MAJOR)
-#define SND_LIB_MAJOR SOUNDLIB_VERSION_MAJOR
-#endif
-#if !defined(SND_LIB_MINOR) && defined(SOUNDLIB_VERSION_MINOR)
-#define SND_LIB_MINOR SOUNDLIB_VERSION_MINOR
-#endif
-#if !defined(SND_LIB_SUBMINOR) && defined(SOUNDLIB_VERSION_SUBMINOR)
-#define SND_LIB_SUBMINOR SOUNDLIB_VERSION_SUBMINOR
-#endif
-
-# if(SND_LIB_MAJOR > $alsa_min_major_version)
- exit(0);
-# else
-# if(SND_LIB_MAJOR < $alsa_min_major_version)
-# error not present
-# endif
-
-# if(SND_LIB_MINOR > $alsa_min_minor_version)
- exit(0);
-# else
-# if(SND_LIB_MINOR < $alsa_min_minor_version)
-# error not present
-# endif
-
-# if(SND_LIB_SUBMINOR < $alsa_min_micro_version)
-# error not present
-# endif
-# endif
-# endif
-exit(0);
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: found." >&5
-$as_echo "found." >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not present." >&5
-$as_echo "not present." >&6; }
- as_fn_error $? "Sufficiently new version of libasound not found." "$LINENO" 5
- alsa_found=no
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-
-if test "x$enable_alsatest" = "xyes"; then
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for snd_ctl_open in -lasound" >&5
-$as_echo_n "checking for snd_ctl_open in -lasound... " >&6; }
-if ${ac_cv_lib_asound_snd_ctl_open+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lasound $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char snd_ctl_open ();
-int
-main ()
-{
-return snd_ctl_open ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_asound_snd_ctl_open=yes
-else
- ac_cv_lib_asound_snd_ctl_open=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_asound_snd_ctl_open" >&5
-$as_echo "$ac_cv_lib_asound_snd_ctl_open" >&6; }
-if test "x$ac_cv_lib_asound_snd_ctl_open" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBASOUND 1
-_ACEOF
-
- LIBS="-lasound $LIBS"
-
-else
- as_fn_error $? "No linkable libasound was found." "$LINENO" 5
- alsa_found=no
-
-fi
-
-fi
-
-if test "x$alsa_found" = "xyes" ; then
- :
- LIBS=`echo $LIBS | sed 's/-lasound//g'`
- LIBS=`echo $LIBS | sed 's/ //'`
- LIBS="-lasound $LIBS"
-fi
-if test "x$alsa_found" = "xno" ; then
- :
- CFLAGS="$alsa_save_CFLAGS"
- LDFLAGS="$alsa_save_LDFLAGS"
- LIBS="$alsa_save_LIBS"
- ALSA_CFLAGS=""
- ALSA_LIBS=""
-fi
-
-
-
-
-if test "x$enable_alsatest" = "xyes"; then
-ac_fn_c_check_func "$LINENO" "snd_ctl_elem_add_enumerated" "ac_cv_func_snd_ctl_elem_add_enumerated"
-if test "x$ac_cv_func_snd_ctl_elem_add_enumerated" = xyes; then :
-
-else
- as_fn_error $? "No user enum control support in alsa-lib" "$LINENO" 5
-fi
-
-fi
-
-for ac_header in alsa/pcm.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "alsa/pcm.h" "ac_cv_header_alsa_pcm_h" "#include <alsa/asoundlib.h>
-"
-if test "x$ac_cv_header_alsa_pcm_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ALSA_PCM_H 1
-_ACEOF
- have_pcm="yes"
-else
- have_pcm="no"
-fi
-
-done
-
-for ac_header in alsa/mixer.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "alsa/mixer.h" "ac_cv_header_alsa_mixer_h" "#include <alsa/asoundlib.h>
-"
-if test "x$ac_cv_header_alsa_mixer_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ALSA_MIXER_H 1
-_ACEOF
- have_mixer="yes"
-else
- have_mixer="no"
-fi
-
-done
-
-for ac_header in alsa/rawmidi.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "alsa/rawmidi.h" "ac_cv_header_alsa_rawmidi_h" "#include <alsa/asoundlib.h>
-"
-if test "x$ac_cv_header_alsa_rawmidi_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ALSA_RAWMIDI_H 1
-_ACEOF
- have_rawmidi="yes"
-else
- have_rawmidi="no"
-fi
-
-done
-
-for ac_header in alsa/seq.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "alsa/seq.h" "ac_cv_header_alsa_seq_h" "#include <alsa/asoundlib.h>
-"
-if test "x$ac_cv_header_alsa_seq_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ALSA_SEQ_H 1
-_ACEOF
- have_seq="yes"
-else
- have_seq="no"
-fi
-
-done
-
-for ac_header in samplerate.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "samplerate.h" "ac_cv_header_samplerate_h" "#include <samplerate.h>
-"
-if test "x$ac_cv_header_samplerate_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_SAMPLERATE_H 1
-_ACEOF
- have_samplerate="yes"
-else
- have_samplerate="no"
-fi
-
-done
-
-
- if test "$have_pcm" = "yes"; then
- HAVE_PCM_TRUE=
- HAVE_PCM_FALSE='#'
-else
- HAVE_PCM_TRUE='#'
- HAVE_PCM_FALSE=
-fi
-
- if test "$have_mixer" = "yes"; then
- HAVE_MIXER_TRUE=
- HAVE_MIXER_FALSE='#'
-else
- HAVE_MIXER_TRUE='#'
- HAVE_MIXER_FALSE=
-fi
-
- if test "$have_rawmidi" = "yes"; then
- HAVE_RAWMIDI_TRUE=
- HAVE_RAWMIDI_FALSE='#'
-else
- HAVE_RAWMIDI_TRUE='#'
- HAVE_RAWMIDI_FALSE=
-fi
-
- if test "$have_seq" = "yes"; then
- HAVE_SEQ_TRUE=
- HAVE_SEQ_FALSE='#'
-else
- HAVE_SEQ_TRUE='#'
- HAVE_SEQ_FALSE=
-fi
-
- if test "$have_samplerate" = "yes"; then
- HAVE_SAMPLERATE_TRUE=
- HAVE_SAMPLERATE_FALSE='#'
-else
- HAVE_SAMPLERATE_TRUE='#'
- HAVE_SAMPLERATE_FALSE=
-fi
-
-
-LIBRT=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for librt" >&5
-$as_echo_n "checking for librt... " >&6; }
-
-# Check whether --with-librt was given.
-if test "${with_librt+set}" = set; then :
- withval=$with_librt; have_librt="$withval"
-else
- have_librt="yes"
-fi
-
-if test "$have_librt" = "yes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for clock_gettime in -lrt" >&5
-$as_echo_n "checking for clock_gettime in -lrt... " >&6; }
-if ${ac_cv_lib_rt_clock_gettime+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lrt $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char clock_gettime ();
-int
-main ()
-{
-return clock_gettime ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_rt_clock_gettime=yes
-else
- ac_cv_lib_rt_clock_gettime=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_rt_clock_gettime" >&5
-$as_echo "$ac_cv_lib_rt_clock_gettime" >&6; }
-if test "x$ac_cv_lib_rt_clock_gettime" = xyes; then :
- HAVE_LIBRT="yes"
-fi
-
- if test "$HAVE_LIBRT" = "yes" ; then
- LIBRT="-lrt"
-
-$as_echo "#define HAVE_LIBRT 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_CLOCK_GETTIME 1" >>confdefs.h
-
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-CURSESINC=""
-CURSESLIB=""
-CURSES_CFLAGS=""
-alsamixer=
-if test "$have_mixer" = "yes"; then
-# Check whether --enable-alsamixer was given.
-if test "${enable_alsamixer+set}" = set; then :
- enableval=$enable_alsamixer; case "${enableval}" in
- yes) alsamixer=true ;;
- no) alsamixer=false ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-alsamixer" "$LINENO" 5 ;;
- esac
-else
- alsamixer=true
-fi
-
-fi
- if test x$alsamixer = xtrue; then
- ALSAMIXER_TRUE=
- ALSAMIXER_FALSE='#'
-else
- ALSAMIXER_TRUE='#'
- ALSAMIXER_FALSE=
-fi
-
-
-# Check whether --enable-alsaconf was given.
-if test "${enable_alsaconf+set}" = set; then :
- enableval=$enable_alsaconf; case "${enableval}" in
- yes) alsaconf=true ;;
- no) alsaconf=false ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-alsaconf" "$LINENO" 5 ;;
- esac
-else
- alsaconf=true
-fi
-
- if test x$alsaconf = xtrue; then
- ALSACONF_TRUE=
- ALSACONF_FALSE='#'
-else
- ALSACONF_TRUE='#'
- ALSACONF_FALSE=
-fi
-
-
-# Check whether --enable-alsaloop was given.
-if test "${enable_alsaloop+set}" = set; then :
- enableval=$enable_alsaloop; case "${enableval}" in
- yes) alsaloop=true ;;
- no) alsaloop=false ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-alsaloop" "$LINENO" 5 ;;
- esac
-else
- alsaloop=true
-fi
-
- if test x$alsaloop = xtrue; then
- ALSALOOP_TRUE=
- ALSALOOP_FALSE='#'
-else
- ALSALOOP_TRUE='#'
- ALSALOOP_FALSE=
-fi
-
-
-xmlto=""
-# Check whether --enable-xmlto was given.
-if test "${enable_xmlto+set}" = set; then :
- enableval=$enable_xmlto; xmlto="$enableval"
-else
- xmlto="yes"
-fi
-
-if test "$xmlto" = "yes"; then
- # Extract the first word of "xmlto", so it can be a program name with args.
-set dummy xmlto; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_xmlto+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$xmlto"; then
- ac_cv_prog_xmlto="$xmlto" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_xmlto="yes"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-xmlto=$ac_cv_prog_xmlto
-if test -n "$xmlto"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xmlto" >&5
-$as_echo "$xmlto" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
- if test x"$xmlto" = xyes; then
- USE_XMLTO_TRUE=
- USE_XMLTO_FALSE='#'
-else
- USE_XMLTO_TRUE='#'
- USE_XMLTO_FALSE=
-fi
-
-
-
-# Check whether --with-udev-rules-dir was given.
-if test "${with_udev_rules_dir+set}" = set; then :
- withval=$with_udev_rules_dir; udevrulesdir=$withval
-else
- udevrulesdir="/lib/udev/rules.d"
-fi
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-if test x$alsamixer = xtrue; then
-
-# Check whether --with-curses was given.
-if test "${with_curses+set}" = set; then :
- withval=$with_curses; curseslib="$withval"
-else
- curseslib="auto"
-fi
-
- CURSESLIBDIR=""
- NCURSESLIBSUFFIX=""
- CURSES_NLS="no"
- if test "$curseslib" = "ncursesw" -o \( "$curseslib" = "auto" -a "$USE_NLS" = "yes" \); then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for NCURSESW" >&5
-$as_echo_n "checking for NCURSESW... " >&6; }
-
-if test -n "$NCURSESW_CFLAGS"; then
- pkg_cv_NCURSESW_CFLAGS="$NCURSESW_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncursesw\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ncursesw") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_NCURSESW_CFLAGS=`$PKG_CONFIG --cflags "ncursesw" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$NCURSESW_LIBS"; then
- pkg_cv_NCURSESW_LIBS="$NCURSESW_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncursesw\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ncursesw") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_NCURSESW_LIBS=`$PKG_CONFIG --libs "ncursesw" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- NCURSESW_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ncursesw" 2>&1`
- else
- NCURSESW_PKG_ERRORS=`$PKG_CONFIG --print-errors "ncursesw" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$NCURSESW_PKG_ERRORS" >&5
-
-
- # Extract the first word of "ncursesw5-config", so it can be a program name with args.
-set dummy ncursesw5-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ncursesw5_config+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ncursesw5_config"; then
- ac_cv_prog_ncursesw5_config="$ncursesw5_config" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ncursesw5_config="yes"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ncursesw5_config=$ac_cv_prog_ncursesw5_config
-if test -n "$ncursesw5_config"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncursesw5_config" >&5
-$as_echo "$ncursesw5_config" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "$ncursesw5_config" = "yes"; then
- CURSESINC="<ncurses.h>"
- CURSESLIB=`ncursesw5-config --libs`
- CURSESLIBDIR=`ncursesw5-config --libdir`
- CURSES_CFLAGS=`ncursesw5-config --cflags`
- curseslib="ncursesw"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncursesw" >&5
-$as_echo_n "checking for initscr in -lncursesw... " >&6; }
-if ${ac_cv_lib_ncursesw_initscr+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lncursesw $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char initscr ();
-int
-main ()
-{
-return initscr ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ncursesw_initscr=yes
-else
- ac_cv_lib_ncursesw_initscr=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_initscr" >&5
-$as_echo "$ac_cv_lib_ncursesw_initscr" >&6; }
-if test "x$ac_cv_lib_ncursesw_initscr" = xyes; then :
- CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"
-fi
-
- fi
-
-elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
- # Extract the first word of "ncursesw5-config", so it can be a program name with args.
-set dummy ncursesw5-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ncursesw5_config+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ncursesw5_config"; then
- ac_cv_prog_ncursesw5_config="$ncursesw5_config" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ncursesw5_config="yes"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ncursesw5_config=$ac_cv_prog_ncursesw5_config
-if test -n "$ncursesw5_config"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncursesw5_config" >&5
-$as_echo "$ncursesw5_config" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "$ncursesw5_config" = "yes"; then
- CURSESINC="<ncurses.h>"
- CURSESLIB=`ncursesw5-config --libs`
- CURSESLIBDIR=`ncursesw5-config --libdir`
- CURSES_CFLAGS=`ncursesw5-config --cflags`
- curseslib="ncursesw"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncursesw" >&5
-$as_echo_n "checking for initscr in -lncursesw... " >&6; }
-if ${ac_cv_lib_ncursesw_initscr+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lncursesw $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char initscr ();
-int
-main ()
-{
-return initscr ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ncursesw_initscr=yes
-else
- ac_cv_lib_ncursesw_initscr=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_initscr" >&5
-$as_echo "$ac_cv_lib_ncursesw_initscr" >&6; }
-if test "x$ac_cv_lib_ncursesw_initscr" = xyes; then :
- CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"
-fi
-
- fi
-
-else
- NCURSESW_CFLAGS=$pkg_cv_NCURSESW_CFLAGS
- NCURSESW_LIBS=$pkg_cv_NCURSESW_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
- CURSESINC="<ncurses.h>"
- CURSESLIB="${NCURSESW_LIBS}"
- CURSESLIBDIR=
- CURSES_CFLAGS="${NCURSESW_CFLAGS}"
- curseslib="ncursesw"
-
-fi
- if test -n "$CURSESINC"; then
- NCURSESLIBSUFFIX="w"
- CURSES_NLS="yes"
- fi
- fi
- if test "$curseslib" = "ncurses" -o "$curseslib" = "auto"; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for NCURSES" >&5
-$as_echo_n "checking for NCURSES... " >&6; }
-
-if test -n "$NCURSES_CFLAGS"; then
- pkg_cv_NCURSES_CFLAGS="$NCURSES_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncurses\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ncurses") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_NCURSES_CFLAGS=`$PKG_CONFIG --cflags "ncurses" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$NCURSES_LIBS"; then
- pkg_cv_NCURSES_LIBS="$NCURSES_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"ncurses\""; } >&5
- ($PKG_CONFIG --exists --print-errors "ncurses") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_NCURSES_LIBS=`$PKG_CONFIG --libs "ncurses" 2>/dev/null`
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- NCURSES_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ncurses" 2>&1`
- else
- NCURSES_PKG_ERRORS=`$PKG_CONFIG --print-errors "ncurses" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$NCURSES_PKG_ERRORS" >&5
-
-
- # Extract the first word of "ncurses5-config", so it can be a program name with args.
-set dummy ncurses5-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ncurses5_config+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ncurses5_config"; then
- ac_cv_prog_ncurses5_config="$ncurses5_config" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ncurses5_config="yes"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ncurses5_config=$ac_cv_prog_ncurses5_config
-if test -n "$ncurses5_config"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncurses5_config" >&5
-$as_echo "$ncurses5_config" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "$ncurses5_config" = "yes"; then
- CURSESINC="<ncurses.h>"
- CURSESLIB=`ncurses5-config --libs`
- CURSESLIBDIR=`ncurses5-config --libdir`
- CURSES_CFLAGS=`ncurses5-config --cflags`
- curseslib="ncurses"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5
-$as_echo_n "checking for initscr in -lncurses... " >&6; }
-if ${ac_cv_lib_ncurses_initscr+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lncurses $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char initscr ();
-int
-main ()
-{
-return initscr ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ncurses_initscr=yes
-else
- ac_cv_lib_ncurses_initscr=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5
-$as_echo "$ac_cv_lib_ncurses_initscr" >&6; }
-if test "x$ac_cv_lib_ncurses_initscr" = xyes; then :
- CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"
-fi
-
- fi
-
-elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
- # Extract the first word of "ncurses5-config", so it can be a program name with args.
-set dummy ncurses5-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ncurses5_config+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ncurses5_config"; then
- ac_cv_prog_ncurses5_config="$ncurses5_config" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ncurses5_config="yes"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ncurses5_config=$ac_cv_prog_ncurses5_config
-if test -n "$ncurses5_config"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ncurses5_config" >&5
-$as_echo "$ncurses5_config" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "$ncurses5_config" = "yes"; then
- CURSESINC="<ncurses.h>"
- CURSESLIB=`ncurses5-config --libs`
- CURSESLIBDIR=`ncurses5-config --libdir`
- CURSES_CFLAGS=`ncurses5-config --cflags`
- curseslib="ncurses"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5
-$as_echo_n "checking for initscr in -lncurses... " >&6; }
-if ${ac_cv_lib_ncurses_initscr+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lncurses $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char initscr ();
-int
-main ()
-{
-return initscr ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ncurses_initscr=yes
-else
- ac_cv_lib_ncurses_initscr=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5
-$as_echo "$ac_cv_lib_ncurses_initscr" >&6; }
-if test "x$ac_cv_lib_ncurses_initscr" = xyes; then :
- CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"
-fi
-
- fi
-
-else
- NCURSES_CFLAGS=$pkg_cv_NCURSES_CFLAGS
- NCURSES_LIBS=$pkg_cv_NCURSES_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
- CURSESINC="<ncurses.h>"
- CURSESLIB="${NCURSES_LIBS}"
- CURSESLIBDIR=
- CURSES_CFLAGS="${NCURSES_CFLAGS}"
- curseslib="ncurses"
-
-fi
- fi
- if test "$curseslib" = "curses" -o "$curseslib" = "auto"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lcurses" >&5
-$as_echo_n "checking for initscr in -lcurses... " >&6; }
-if ${ac_cv_lib_curses_initscr+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcurses $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char initscr ();
-int
-main ()
-{
-return initscr ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_curses_initscr=yes
-else
- ac_cv_lib_curses_initscr=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_initscr" >&5
-$as_echo "$ac_cv_lib_curses_initscr" >&6; }
-if test "x$ac_cv_lib_curses_initscr" = xyes; then :
- CURSESINC='<curses.h>'; CURSESLIB='-lcurses'; curseslib="curses"
-fi
-
- fi
- if test -z "$CURSESINC"; then
- as_fn_error $? "this packages requires a curses library" "$LINENO" 5
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses library" >&5
-$as_echo_n "checking for curses library... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $curseslib" >&5
-$as_echo "$curseslib" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses header name" >&5
-$as_echo_n "checking for curses header name... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSESINC" >&5
-$as_echo "$CURSESINC" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses compiler flags" >&5
-$as_echo_n "checking for curses compiler flags... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSES_CFLAGS" >&5
-$as_echo "$CURSES_CFLAGS" >&6; }
-
- if test -n "$CURSESLIBDIR"; then
- if test "-L$CURSESLIBDIR " = "$(echo $CURSESLIB | cut -c-$((${#CURSESLIBDIR}+3)) )"; then
- CURSESLIB="$(echo $CURSESLIB | cut -c$((${#CURSESLIBDIR}+4))-)"
- fi
- fi
-
- saved_CFLAGS="$CFLAGS"
- saved_LDFLAGS="$LDFLAGS"
- saved_LIBS="$LIBS"
- CFLAGS="$CFLAGS $CURSES_CFLAGS"
- if test -n "$CURSESLIBDIR"; then
- LDFLAGS="$LDFLAGS -L$CURSESLIBDIR"
- fi
- LIBS="$CURSESLIB $LIBS"
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <panel.h>
-int
-main ()
-{
-set_escdelay(100);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- HAVE_CURSES_ESCDELAY="yes"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test "$HAVE_CURSES_ESCDELAY" = "yes"; then
-
-$as_echo "#define HAVE_CURSES_ESCDELAY 1" >>confdefs.h
-
- fi
-
- if test "$USE_NLS" = "yes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses NLS support" >&5
-$as_echo_n "checking for curses NLS support... " >&6; }
- if test "$curseslib" = "curses"; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #define _XOPEN_SOURCE 1
- #define _XOPEN_SOURCE_EXTENDED 1
- #include <curses.h>
-
-int
-main ()
-{
-
- cchar_t wc;
- setcchar(&wc, L"x", A_NORMAL, 0, 0);
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- CURSES_NLS="yes"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSES_NLS" >&5
-$as_echo "$CURSES_NLS" >&6; }
- if test "$CURSES_NLS" = "yes"; then
-
-$as_echo "#define ENABLE_NLS_IN_CURSES 1" >>confdefs.h
-
- fi
- fi
-
- # On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in panel.h menu.h form.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-else
- as_fn_error $? "required curses helper header not found" "$LINENO" 5
-fi
-
-done
-
- as_ac_Lib=`$as_echo "ac_cv_lib_panel$NCURSESLIBSUFFIX''_new_panel" | $as_tr_sh`
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for new_panel in -lpanel$NCURSESLIBSUFFIX" >&5
-$as_echo_n "checking for new_panel in -lpanel$NCURSESLIBSUFFIX... " >&6; }
-if eval \${$as_ac_Lib+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpanel$NCURSESLIBSUFFIX $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char new_panel ();
-int
-main ()
-{
-return new_panel ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$as_ac_Lib=yes"
-else
- eval "$as_ac_Lib=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-eval ac_res=\$$as_ac_Lib
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
- CURSESLIB="-lpanel$NCURSESLIBSUFFIX $CURSESLIB"
-else
- as_fn_error $? "panel$NCURSESLIBSUFFIX library not found" "$LINENO" 5
-fi
-
- as_ac_Lib=`$as_echo "ac_cv_lib_menu$NCURSESLIBSUFFIX''_new_menu" | $as_tr_sh`
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for new_menu in -lmenu$NCURSESLIBSUFFIX" >&5
-$as_echo_n "checking for new_menu in -lmenu$NCURSESLIBSUFFIX... " >&6; }
-if eval \${$as_ac_Lib+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lmenu$NCURSESLIBSUFFIX $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char new_menu ();
-int
-main ()
-{
-return new_menu ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$as_ac_Lib=yes"
-else
- eval "$as_ac_Lib=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-eval ac_res=\$$as_ac_Lib
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
- CURSESLIB="-lmenu$NCURSESLIBSUFFIX $CURSESLIB"
-else
- as_fn_error $? "menu$NCURSESLIBSUFFIX library not found" "$LINENO" 5
-fi
-
- as_ac_Lib=`$as_echo "ac_cv_lib_form$NCURSESLIBSUFFIX''_new_form" | $as_tr_sh`
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for new_form in -lform$NCURSESLIBSUFFIX" >&5
-$as_echo_n "checking for new_form in -lform$NCURSESLIBSUFFIX... " >&6; }
-if eval \${$as_ac_Lib+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lform$NCURSESLIBSUFFIX $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char new_form ();
-int
-main ()
-{
-return new_form ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$as_ac_Lib=yes"
-else
- eval "$as_ac_Lib=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-eval ac_res=\$$as_ac_Lib
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
- CURSESLIB="-lform$NCURSESLIBSUFFIX $CURSESLIB"
-else
- as_fn_error $? "form$NCURSESLIBSUFFIX library not found" "$LINENO" 5
-fi
-
-
- CFLAGS="$saved_CFLAGS"
- LDFLAGS="$saved_LDFLAGS"
- LIBS="$saved_LIBS"
-
- if test -n "$CURSESLIBDIR"; then
- CURSESLIB="-L$CURSESLIBDIR $CURSESLIB"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for curses linker flags" >&5
-$as_echo_n "checking for curses linker flags... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CURSESLIB" >&5
-$as_echo "$CURSESLIB" >&6; }
-fi
-
-
-
-
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-
-eval dir="$datadir"
-case "$dir" in
-/*) ;;
-*) dir="$prefix/share"
-esac
-
-soundsdir="$dir/sounds/alsa"
-
-cat >>confdefs.h <<_ACEOF
-#define SOUNDSDIR "$soundsdir"
-_ACEOF
-
-
-mydatadir="$dir/alsa"
-
-cat >>confdefs.h <<_ACEOF
-#define DATADIR "$mydatadir"
-_ACEOF
-
-
-
-# Check whether --with-testsound was given.
-if test "${with_testsound+set}" = set; then :
- withval=$with_testsound; TESTSOUND="$withval"
-else
- TESTSOUND="$dir/test.wav"
-fi
-
-
-
-ac_config_headers="$ac_config_headers include/aconfig.h"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
-$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if ${ac_cv_c_const+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this sort of thing. */
- typedef int charset[2];
- const charset cs = { 0, 0 };
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *pcpcc;
- char **ppc;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- pcpcc = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++pcpcc;
- ppc = (char**) pcpcc;
- pcpcc = (char const *const *) ppc;
- { /* SCO 3.2v4 cc rejects this sort of thing. */
- char tx;
- char *t = &tx;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- if (s) return 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; } bx;
- struct s *b = &bx; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- if (!foo) return 0;
- }
- return !cs[0] && !zero.x;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_const=yes
-else
- ac_cv_c_const=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
-$as_echo "$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-$as_echo "#define const /**/" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
-$as_echo_n "checking for inline... " >&6; }
-if ${ac_cv_c_inline+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_inline=$ac_kw
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_inline" != no && break
-done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
-$as_echo "$ac_cv_c_inline" >&6; }
-
-case $ac_cv_c_inline in
- inline | yes) ;;
- *)
- case $ac_cv_c_inline in
- no) ac_val=;;
- *) ac_val=$ac_cv_c_inline;;
- esac
- cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
- ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
-$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
-if ${ac_cv_header_time+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_time=yes
-else
- ac_cv_header_time=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
-$as_echo "$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
-
-fi
-
-
-if test $ac_cv_c_compiler_gnu = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5
-$as_echo_n "checking whether $CC needs -traditional... " >&6; }
-if ${ac_cv_prog_gcc_traditional+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_pattern="Autoconf.*'x'"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sgtty.h>
-Autoconf TIOCGETP
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "$ac_pattern" >/dev/null 2>&1; then :
- ac_cv_prog_gcc_traditional=yes
-else
- ac_cv_prog_gcc_traditional=no
-fi
-rm -f conftest*
-
-
- if test $ac_cv_prog_gcc_traditional = no; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <termio.h>
-Autoconf TCGETA
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "$ac_pattern" >/dev/null 2>&1; then :
- ac_cv_prog_gcc_traditional=yes
-fi
-rm -f conftest*
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5
-$as_echo "$ac_cv_prog_gcc_traditional" >&6; }
- if test $ac_cv_prog_gcc_traditional = yes; then
- CC="$CC -traditional"
- fi
-fi
-
-
-# Check whether --enable-largefile was given.
-if test "${enable_largefile+set}" = set; then :
- enableval=$enable_largefile;
-fi
-
-if test "$enable_largefile" != no; then
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
-$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
-if ${ac_cv_sys_largefile_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_sys_largefile_CC=no
- if test "$GCC" != yes; then
- ac_save_CC=$CC
- while :; do
- # IRIX 6.2 and later do not support large files by default,
- # so use the C compiler's -n32 option if that helps.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
- break
-fi
-rm -f core conftest.err conftest.$ac_objext
- CC="$CC -n32"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_largefile_CC=' -n32'; break
-fi
-rm -f core conftest.err conftest.$ac_objext
- break
- done
- CC=$ac_save_CC
- rm -f conftest.$ac_ext
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
-$as_echo "$ac_cv_sys_largefile_CC" >&6; }
- if test "$ac_cv_sys_largefile_CC" != no; then
- CC=$CC$ac_cv_sys_largefile_CC
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
-if ${ac_cv_sys_file_offset_bits+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_file_offset_bits=no; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#define _FILE_OFFSET_BITS 64
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_file_offset_bits=64; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_sys_file_offset_bits=unknown
- break
-done
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
-$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
-case $ac_cv_sys_file_offset_bits in #(
- no | unknown) ;;
- *)
-cat >>confdefs.h <<_ACEOF
-#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-_ACEOF
-;;
-esac
-rm -rf conftest*
- if test $ac_cv_sys_file_offset_bits = unknown; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
-$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
-if ${ac_cv_sys_large_files+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_large_files=no; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#define _LARGE_FILES 1
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_sys_large_files=1; break
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_sys_large_files=unknown
- break
-done
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
-$as_echo "$ac_cv_sys_large_files" >&6; }
-case $ac_cv_sys_large_files in #(
- no | unknown) ;;
- *)
-cat >>confdefs.h <<_ACEOF
-#define _LARGE_FILES $ac_cv_sys_large_files
-_ACEOF
-;;
-esac
-rm -rf conftest*
- fi
-
-
-fi
-
-
-
-SND_UTIL_VERSION=$VERSION
-echo $VERSION > $srcdir/version
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$SND_UTIL_VERSION"
-_ACEOF
-
-
-SND_UTIL_MAJOR=`echo $VERSION | cut -d . -f 1`
-
-SND_UTIL_MINOR=`echo $VERSION | cut -d . -f 2`
-
-SND_UTIL_SUBMINOR=`echo $VERSION | cut -d . -f 3 | sed -e 's/pre[0-9]*//g'`
-
-
-
-
-
-
-# Check whether --with-systemdsystemunitdir was given.
-if test "${with_systemdsystemunitdir+set}" = set; then :
- withval=$with_systemdsystemunitdir;
-else
- with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)
-fi
-
-if test "x$with_systemdsystemunitdir" != xno; then
- systemdsystemunitdir=$with_systemdsystemunitdir
-
-fi
- if test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ; then
- HAVE_SYSTEMD_TRUE=
- HAVE_SYSTEMD_FALSE='#'
-else
- HAVE_SYSTEMD_TRUE='#'
- HAVE_SYSTEMD_FALSE=
-fi
-
-
-
-# Check whether --with-asound-state-dir was given.
-if test "${with_asound_state_dir+set}" = set; then :
- withval=$with_asound_state_dir; ASOUND_STATE_DIR="$withval"
-else
- ASOUND_STATE_DIR="/var/lib/alsa"
-fi
-
-
-
-
-# Check whether --with-alsactl-pidfile-dir was given.
-if test "${with_alsactl_pidfile_dir+set}" = set; then :
- withval=$with_alsactl_pidfile_dir; ALSACTL_PIDFILE_DIR="$withval"
-else
- ALSACTL_PIDFILE_DIR="/var/run"
-fi
-
-
-
-
-# Check whether --with-alsactl-daemonswitch was given.
-if test "${with_alsactl_daemonswitch+set}" = set; then :
- withval=$with_alsactl_daemonswitch; ALSACTL_DAEMONSWITCH="$withval"
-else
- ALSACTL_DAEMONSWITCH="/etc/alsa/state-daemon.conf"
-fi
-
-
-
-ac_config_files="$ac_config_files Makefile alsactl/Makefile alsactl/init/Makefile alsamixer/Makefile amidi/Makefile amixer/Makefile m4/Makefile po/Makefile.in alsaconf/alsaconf alsaconf/Makefile alsaconf/po/Makefile alsaucm/Makefile aplay/Makefile include/Makefile iecset/Makefile utils/Makefile utils/alsa-utils.spec seq/Makefile seq/aconnect/Makefile seq/aplaymidi/Makefile seq/aseqdump/Makefile seq/aseqnet/Makefile speaker-test/Makefile speaker-test/samples/Makefile alsaloop/Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
-$as_echo_n "checking that generated files are newer than configure... " >&6; }
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
-$as_echo "done" >&6; }
- if test -n "$EXEEXT"; then
- am__EXEEXT_TRUE=
- am__EXEEXT_FALSE='#'
-else
- am__EXEEXT_TRUE='#'
- am__EXEEXT_FALSE=
-fi
-
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${HAVE_PCM_TRUE}" && test -z "${HAVE_PCM_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_PCM\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${HAVE_MIXER_TRUE}" && test -z "${HAVE_MIXER_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_MIXER\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${HAVE_RAWMIDI_TRUE}" && test -z "${HAVE_RAWMIDI_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_RAWMIDI\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${HAVE_SEQ_TRUE}" && test -z "${HAVE_SEQ_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_SEQ\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${HAVE_SAMPLERATE_TRUE}" && test -z "${HAVE_SAMPLERATE_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_SAMPLERATE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ALSAMIXER_TRUE}" && test -z "${ALSAMIXER_FALSE}"; then
- as_fn_error $? "conditional \"ALSAMIXER\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ALSACONF_TRUE}" && test -z "${ALSACONF_FALSE}"; then
- as_fn_error $? "conditional \"ALSACONF\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ALSALOOP_TRUE}" && test -z "${ALSALOOP_FALSE}"; then
- as_fn_error $? "conditional \"ALSALOOP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${USE_XMLTO_TRUE}" && test -z "${USE_XMLTO_FALSE}"; then
- as_fn_error $? "conditional \"USE_XMLTO\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${HAVE_SYSTEMD_TRUE}" && test -z "${HAVE_SYSTEMD_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_SYSTEMD\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.69,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append CONFIG_HEADERS " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
- --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
-
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "include/aconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS include/aconfig.h" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "alsactl/Makefile") CONFIG_FILES="$CONFIG_FILES alsactl/Makefile" ;;
- "alsactl/init/Makefile") CONFIG_FILES="$CONFIG_FILES alsactl/init/Makefile" ;;
- "alsamixer/Makefile") CONFIG_FILES="$CONFIG_FILES alsamixer/Makefile" ;;
- "amidi/Makefile") CONFIG_FILES="$CONFIG_FILES amidi/Makefile" ;;
- "amixer/Makefile") CONFIG_FILES="$CONFIG_FILES amixer/Makefile" ;;
- "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
- "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
- "alsaconf/alsaconf") CONFIG_FILES="$CONFIG_FILES alsaconf/alsaconf" ;;
- "alsaconf/Makefile") CONFIG_FILES="$CONFIG_FILES alsaconf/Makefile" ;;
- "alsaconf/po/Makefile") CONFIG_FILES="$CONFIG_FILES alsaconf/po/Makefile" ;;
- "alsaucm/Makefile") CONFIG_FILES="$CONFIG_FILES alsaucm/Makefile" ;;
- "aplay/Makefile") CONFIG_FILES="$CONFIG_FILES aplay/Makefile" ;;
- "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
- "iecset/Makefile") CONFIG_FILES="$CONFIG_FILES iecset/Makefile" ;;
- "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;;
- "utils/alsa-utils.spec") CONFIG_FILES="$CONFIG_FILES utils/alsa-utils.spec" ;;
- "seq/Makefile") CONFIG_FILES="$CONFIG_FILES seq/Makefile" ;;
- "seq/aconnect/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aconnect/Makefile" ;;
- "seq/aplaymidi/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aplaymidi/Makefile" ;;
- "seq/aseqdump/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aseqdump/Makefile" ;;
- "seq/aseqnet/Makefile") CONFIG_FILES="$CONFIG_FILES seq/aseqnet/Makefile" ;;
- "speaker-test/Makefile") CONFIG_FILES="$CONFIG_FILES speaker-test/Makefile" ;;
- "speaker-test/samples/Makefile") CONFIG_FILES="$CONFIG_FILES speaker-test/samples/Makefile" ;;
- "alsaloop/Makefile") CONFIG_FILES="$CONFIG_FILES alsaloop/Makefile" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = ""
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
- ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_tt"; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any. Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- for (key in D) D_is_set[key] = 1
- FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
- line = \$ 0
- split(line, arg, " ")
- if (arg[1] == "#") {
- defundef = arg[2]
- mac1 = arg[3]
- } else {
- defundef = substr(arg[1], 2)
- mac1 = arg[2]
- }
- split(mac1, mac2, "(") #)
- macro = mac2[1]
- prefix = substr(line, 1, index(line, defundef) - 1)
- if (D_is_set[macro]) {
- # Preserve the white space surrounding the "#".
- print prefix "define", macro P[macro] D[macro]
- next
- } else {
- # Replace #undef with comments. This is necessary, for example,
- # in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
- if (defundef == "undef") {
- print "/*", prefix defundef, macro, "*/"
- next
- }
- }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- if test x"$ac_file" != x-; then
- {
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
- } >"$ac_tmp/config.h" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f "$ac_file"
- mv "$ac_tmp/config.h" "$ac_file" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- fi
- else
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error $? "could not create -" "$LINENO" 5
- fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$_am_arg" : 'X\(//\)[^/]' \| \
- X"$_am_arg" : 'X\(//\)$' \| \
- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "po-directories":C)
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done ;;
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
- ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/configure.in b/configure.in
index 3ae3209..2208a95 100644
--- a/configure.in
+++ b/configure.in
@@ -2,9 +2,7 @@
AC_PREREQ(2.59)
AC_INIT(aplay/aplay.c)
AC_PREFIX_DEFAULT(/usr)
-AM_INIT_AUTOMAKE(alsa-utils, 1.0.27.2)
-
-AM_MAINTAINER_MODE([enable])
+AM_INIT_AUTOMAKE(alsa-utils, 1.0.25)
AM_GNU_GETTEXT([external])
AM_GNU_GETTEXT_VERSION([0.15])
@@ -31,12 +29,9 @@
AC_PROG_MKDIR_P
AC_PROG_LN_S
AC_PROG_SED
-PKG_PROG_PKG_CONFIG
-AM_PATH_ALSA(1.0.27)
-if test "x$enable_alsatest" = "xyes"; then
+AM_PATH_ALSA(1.0.24)
AC_CHECK_FUNC([snd_ctl_elem_add_enumerated],
, [AC_ERROR([No user enum control support in alsa-lib])])
-fi
dnl Check components
AC_CHECK_HEADERS([alsa/pcm.h], [have_pcm="yes"], [have_pcm="no"],
@@ -80,7 +75,7 @@
alsamixer=
if test "$have_mixer" = "yes"; then
AC_ARG_ENABLE(alsamixer,
- AS_HELP_STRING([--disable-alsamixer], [Disable alsamixer compilation]),
+ [ --disable-alsamixer Disable alsamixer compilation],
[case "${enableval}" in
yes) alsamixer=true ;;
no) alsamixer=false ;;
@@ -91,7 +86,7 @@
dnl Disable alsaconf
AC_ARG_ENABLE(alsaconf,
- AS_HELP_STRING([--disable-alsaconf], [Disable alsaconf packaging]),
+ [ --disable-alsaconf Disable alsaconf packaging],
[case "${enableval}" in
yes) alsaconf=true ;;
no) alsaconf=false ;;
@@ -101,7 +96,7 @@
dnl Disable alsaloop
AC_ARG_ENABLE(alsaloop,
- AS_HELP_STRING([--disable-alsaloop], [Disable alsaloop packaging]),
+ [ --disable-alsaloop Disable alsaloop packaging],
[case "${enableval}" in
yes) alsaloop=true ;;
no) alsaloop=false ;;
@@ -128,59 +123,41 @@
AC_HEADER_STDC
if test x$alsamixer = xtrue; then
AC_ARG_WITH(curses,
- AS_HELP_STRING([--with-curses=libname], [Specify the curses library to use (default=auto)]),
+ [ --with-curses libname Specify the curses library to use (default=auto)],
curseslib="$withval",
curseslib="auto")
CURSESLIBDIR=""
NCURSESLIBSUFFIX=""
CURSES_NLS="no"
if test "$curseslib" = "ncursesw" -o \( "$curseslib" = "auto" -a "$USE_NLS" = "yes" \); then
- dnl First try out pkg-config, then fall back to old config scripts.
- PKG_CHECK_MODULES([NCURSESW], [ncursesw], [
- CURSESINC="<ncurses.h>"
- CURSESLIB="${NCURSESW_LIBS}"
- CURSESLIBDIR=
- CURSES_CFLAGS="${NCURSESW_CFLAGS}"
- curseslib="ncursesw"
- ], [
- AC_CHECK_PROG([ncursesw5_config], [ncursesw5-config], [yes])
- if test "$ncursesw5_config" = "yes"; then
- CURSESINC="<ncurses.h>"
- CURSESLIB=`ncursesw5-config --libs`
- CURSESLIBDIR=`ncursesw5-config --libdir`
- CURSES_CFLAGS=`ncursesw5-config --cflags`
- curseslib="ncursesw"
- else
- AC_CHECK_LIB(ncursesw, initscr,
- [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"])
- fi
- ])
+ AC_CHECK_PROG([ncursesw5_config], [ncursesw5-config], [yes])
+ if test "$ncursesw5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncursesw5-config --libs`
+ CURSESLIBDIR=`ncursesw5-config --libdir`
+ CURSES_CFLAGS=`ncursesw5-config --cflags`
+ curseslib="ncursesw"
+ else
+ AC_CHECK_LIB(ncursesw, initscr,
+ [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncursesw'; curseslib="ncursesw"])
+ fi
if test -n "$CURSESINC"; then
NCURSESLIBSUFFIX="w"
CURSES_NLS="yes"
fi
fi
if test "$curseslib" = "ncurses" -o "$curseslib" = "auto"; then
- dnl First try out pkg-config, then fall back to old config scripts.
- PKG_CHECK_MODULES([NCURSES], [ncurses], [
- CURSESINC="<ncurses.h>"
- CURSESLIB="${NCURSES_LIBS}"
- CURSESLIBDIR=
- CURSES_CFLAGS="${NCURSES_CFLAGS}"
- curseslib="ncurses"
- ], [
- AC_CHECK_PROG([ncurses5_config], [ncurses5-config], [yes])
- if test "$ncurses5_config" = "yes"; then
- CURSESINC="<ncurses.h>"
- CURSESLIB=`ncurses5-config --libs`
- CURSESLIBDIR=`ncurses5-config --libdir`
- CURSES_CFLAGS=`ncurses5-config --cflags`
- curseslib="ncurses"
- else
- AC_CHECK_LIB(ncurses, initscr,
- [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"])
- fi
- ])
+ AC_CHECK_PROG([ncurses5_config], [ncurses5-config], [yes])
+ if test "$ncurses5_config" = "yes"; then
+ CURSESINC="<ncurses.h>"
+ CURSESLIB=`ncurses5-config --libs`
+ CURSESLIBDIR=`ncurses5-config --libdir`
+ CURSES_CFLAGS=`ncurses5-config --cflags`
+ curseslib="ncurses"
+ else
+ AC_CHECK_LIB(ncurses, initscr,
+ [ CURSESINC='<ncurses.h>'; CURSESLIB='-lncurses'; curseslib="ncurses"])
+ fi
fi
if test "$curseslib" = "curses" -o "$curseslib" = "auto"; then
AC_CHECK_LIB(curses, initscr,
@@ -287,12 +264,12 @@
AC_DEFINE_UNQUOTED(DATADIR, "$mydatadir", [directory containing alsa configuration])
AC_ARG_WITH(testsound,
- AS_HELP_STRING([--with-testsound=file], [give the path of test sound file for alsaconf]),
+ [ --with-testsound=file give the path of test sound file for alsaconf],
TESTSOUND="$withval",
TESTSOUND="$dir/test.wav")
AC_SUBST(TESTSOUND)
-AC_CONFIG_HEADERS(include/aconfig.h)
+AM_CONFIG_HEADER(include/aconfig.h)
dnl Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
@@ -310,6 +287,7 @@
AC_SUBST(LIBRT)
dnl Check for systemd
+PKG_PROG_PKG_CONFIG
AC_ARG_WITH([systemdsystemunitdir],
AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
[], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
@@ -324,18 +302,6 @@
[ASOUND_STATE_DIR="/var/lib/alsa"])
AC_SUBST(ASOUND_STATE_DIR)
-AC_ARG_WITH([alsactl-pidfile-dir],
- AS_HELP_STRING([--with-alsactl-pidfile-dir=DIR], [Directory to place alsactl.pid file in]),
- [ALSACTL_PIDFILE_DIR="$withval"],
- [ALSACTL_PIDFILE_DIR="/var/run"])
-AC_SUBST(ALSACTL_PIDFILE_DIR)
-
-AC_ARG_WITH([alsactl-daemonswitch],
- AS_HELP_STRING([--with-alsactl-daemonswitch=FILE], [File to test for the daemon mode]),
- [ALSACTL_DAEMONSWITCH="$withval"],
- [ALSACTL_DAEMONSWITCH="/etc/alsa/state-daemon.conf"])
-AC_SUBST(ALSACTL_DAEMONSWITCH)
-
AC_OUTPUT(Makefile alsactl/Makefile alsactl/init/Makefile \
alsamixer/Makefile amidi/Makefile amixer/Makefile \
m4/Makefile po/Makefile.in \
diff --git a/cvscompile b/cvscompile
new file mode 100755
index 0000000..64ade4f
--- /dev/null
+++ b/cvscompile
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+if test -d ../alsa-lib/utils && ! test -r `aclocal --print-ac-dir`/alsa.m4; then
+ alsa_m4_flags="-I ../alsa-lib/utils"
+fi
+aclocal $alsa_m4_flags $ACLOCAL_FLAGS
+# save original files to avoid stupid modifications by gettextize
+cp Makefile.am Makefile.am.ok
+cp configure.in configure.in.ok
+gettextize -c -f --no-changelog
+echo "EXTRA_DIST = gettext.m4" > m4/Makefile.am
+cp Makefile.am.ok Makefile.am
+cp configure.in.ok configure.in
+autoheader
+automake --foreign --copy --add-missing
+touch depcomp # for older automake
+autoconf
+export CFLAGS='-O2 -Wall -pipe -g'
+echo "CFLAGS=$CFLAGS"
+echo "./configure $@"
+./configure $@ || exit 1
+unset CFLAGS
+if [ -z "$CVSCOMPILE_NO_MAKE" ]; then
+ make
+fi
diff --git a/depcomp b/depcomp
deleted file mode 100755
index debb6ff..0000000
--- a/depcomp
+++ /dev/null
@@ -1,707 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2012-03-27.16; # UTC
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
-## Some versions of gcc put a space before the ':'. On the theory
-## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
- # dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
- "$@" -Wc,-M
- else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
- "$@" -M
- fi
- stat=$?
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
- "$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no eat=no
- for arg
- do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- if test $eat = yes; then
- eat=no
- continue
- fi
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- IFS=" "
- for arg
- do
- case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/iecset/Android.mk b/iecset/Android.mk
deleted file mode 100644
index f3334dd..0000000
--- a/iecset/Android.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := iecset
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := iecbits.c \
- iecset.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/iecset/Makefile.in b/iecset/Makefile.in
deleted file mode 100644
index f75b414..0000000
--- a/iecset/Makefile.in
+++ /dev/null
@@ -1,649 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = iecset$(EXEEXT)
-subdir = iecset
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_iecset_OBJECTS = iecset.$(OBJEXT) iecbits.$(OBJEXT)
-iecset_OBJECTS = $(am_iecset_OBJECTS)
-iecset_LDADD = $(LDADD)
-iecset_DEPENDENCIES =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(iecset_SOURCES)
-DIST_SOURCES = $(iecset_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-LDADD = -lm
-iecset_SOURCES = iecset.c iecbits.c
-man_MANS = iecset.1
-EXTRA_DIST = iecset.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign iecset/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign iecset/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-iecset$(EXEEXT): $(iecset_OBJECTS) $(iecset_DEPENDENCIES) $(EXTRA_iecset_DEPENDENCIES)
- @rm -f iecset$(EXEEXT)
- $(LINK) $(iecset_OBJECTS) $(iecset_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iecbits.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iecset.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/iecset/NOTICE b/iecset/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/iecset/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/iecset/iecbits.c b/iecset/iecbits.c
index 13e8947..edea932 100644
--- a/iecset/iecbits.c
+++ b/iecset/iecbits.c
@@ -218,7 +218,7 @@
printf("user-defined\n");
break;
default:
- printf("unknown\n");
+ printf("unkown\n");
break;
}
printf("Sample Bits: ");
diff --git a/include/Makefile.in b/include/Makefile.in
deleted file mode 100644
index 992f8c3..0000000
--- a/include/Makefile.in
+++ /dev/null
@@ -1,507 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = include
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/aconfig.h.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-noinst_HEADERS = version.h gettext.h gettext_curses.h
-INCLUDES = -I$(top_srcdir)/include
-all: aconfig.h
- $(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign include/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-aconfig.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
-
-stamp-h1: $(srcdir)/aconfig.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status include/aconfig.h
-$(srcdir)/aconfig.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f aconfig.h stamp-h1
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) aconfig.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) aconfig.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) aconfig.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) aconfig.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(HEADERS) aconfig.h
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: all install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- cscopelist ctags distclean distclean-generic distclean-hdr \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am
-
-
-version.h: stamp-vh
- @:
-
-stamp-vh: $(top_builddir)/configure.in
- @echo "/*" > ver.tmp
- @echo " * version.h" >> ver.tmp
- @echo " */" >> ver.tmp
- @echo "" >> ver.tmp
- @echo "#define SND_UTIL_MAJOR $(SND_UTIL_MAJOR)" >> ver.tmp
- @echo "#define SND_UTIL_MINOR $(SND_UTIL_MINOR)" >> ver.tmp
- @echo "#define SND_UTIL_SUBMINOR $(SND_UTIL_SUBMINOR)" >> ver.tmp
- @echo "#define SND_UTIL_VERSION ((SND_UTIL_MAJOR<<16)|\\" >> ver.tmp
- @echo " (SND_UTIL_MINOR<<8)|\\" >> ver.tmp
- @echo " SND_UTIL_SUBMINOR)" >> ver.tmp
- @echo "#define SND_UTIL_VERSION_STR \"$(SND_UTIL_VERSION)\"" >> ver.tmp
- @echo >> ver.tmp
- @cmp -s version.h ver.tmp \
- || (echo "Updating version.h"; \
- cp ver.tmp version.h; \
- echo timestamp > stamp-vh)
- -@rm -f ver.tmp
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/include/aconfig.h b/include/aconfig.h
deleted file mode 100644
index 7011e0b..0000000
--- a/include/aconfig.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* include/aconfig.h. Generated from aconfig.h.in by configure. */
-/* include/aconfig.h.in. Generated from configure.in by autoheader. */
-
-/* directory containing alsa configuration */
-#define DATADIR "/usr/share/alsa"
-
-/* Define to 1 if translation of program messages to the user's native
- language is requested. */
-#define ENABLE_NLS 1
-
-/* Define if curses-based programs can show translated messages. */
-#define ENABLE_NLS_IN_CURSES 1
-
-/* Define to 1 if you have the <alsa/mixer.h> header file. */
-#define HAVE_ALSA_MIXER_H 1
-
-/* Define to 1 if you have the <alsa/pcm.h> header file. */
-#define HAVE_ALSA_PCM_H 1
-
-/* Define to 1 if you have the <alsa/rawmidi.h> header file. */
-#define HAVE_ALSA_RAWMIDI_H 1
-
-/* Define to 1 if you have the <alsa/seq.h> header file. */
-#define HAVE_ALSA_SEQ_H 1
-
-/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
- CoreFoundation framework. */
-/* #undef HAVE_CFLOCALECOPYCURRENT */
-
-/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
- the CoreFoundation framework. */
-/* #undef HAVE_CFPREFERENCESCOPYAPPVALUE */
-
-/* Have clock gettime */
-#define HAVE_CLOCK_GETTIME 1
-
-/* Have curses set_escdelay */
-#define HAVE_CURSES_ESCDELAY 1
-
-/* Define if the GNU dcgettext() function is already present or preinstalled.
- */
-#define HAVE_DCGETTEXT 1
-
-/* Define to 1 if you have the <form.h> header file. */
-#define HAVE_FORM_H 1
-
-/* Define if the GNU gettext() function is already present or preinstalled. */
-#define HAVE_GETTEXT 1
-
-/* Define if you have the iconv() function and it works. */
-/* #undef HAVE_ICONV */
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define to 1 if you have the `asound' library (-lasound). */
-#define HAVE_LIBASOUND 1
-
-/* Have librt */
-#define HAVE_LIBRT 1
-
-/* Define to 1 if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define to 1 if you have the <menu.h> header file. */
-#define HAVE_MENU_H 1
-
-/* Define to 1 if you have the <panel.h> header file. */
-#define HAVE_PANEL_H 1
-
-/* Define to 1 if you have the <samplerate.h> header file. */
-/* #undef HAVE_SAMPLERATE_H */
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Name of package */
-#define PACKAGE "alsa-utils"
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT ""
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME ""
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING ""
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME ""
-
-/* Define to the home page for this package. */
-#define PACKAGE_URL ""
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION ""
-
-/* directory containing sample data */
-#define SOUNDSDIR "/usr/share/sounds/alsa"
-
-/* Define to 1 if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#define TIME_WITH_SYS_TIME 1
-
-/* ALSA util version */
-#define VERSION "1.0.27.2"
-
-/* Enable large inode numbers on Mac OS X 10.5. */
-#ifndef _DARWIN_USE_64_BIT_INODE
-# define _DARWIN_USE_64_BIT_INODE 1
-#endif
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-/* #undef _FILE_OFFSET_BITS */
-
-/* Define for large files, on AIX-style hosts. */
-/* #undef _LARGE_FILES */
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #undef const */
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-/* #undef inline */
-#endif
diff --git a/include/aconfig.h.in b/include/aconfig.h.in
deleted file mode 100644
index fbb4e75..0000000
--- a/include/aconfig.h.in
+++ /dev/null
@@ -1,145 +0,0 @@
-/* include/aconfig.h.in. Generated from configure.in by autoheader. */
-
-/* directory containing alsa configuration */
-#undef DATADIR
-
-/* Define to 1 if translation of program messages to the user's native
- language is requested. */
-#undef ENABLE_NLS
-
-/* Define if curses-based programs can show translated messages. */
-#undef ENABLE_NLS_IN_CURSES
-
-/* Define to 1 if you have the <alsa/mixer.h> header file. */
-#undef HAVE_ALSA_MIXER_H
-
-/* Define to 1 if you have the <alsa/pcm.h> header file. */
-#undef HAVE_ALSA_PCM_H
-
-/* Define to 1 if you have the <alsa/rawmidi.h> header file. */
-#undef HAVE_ALSA_RAWMIDI_H
-
-/* Define to 1 if you have the <alsa/seq.h> header file. */
-#undef HAVE_ALSA_SEQ_H
-
-/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
- CoreFoundation framework. */
-#undef HAVE_CFLOCALECOPYCURRENT
-
-/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
- the CoreFoundation framework. */
-#undef HAVE_CFPREFERENCESCOPYAPPVALUE
-
-/* Have clock gettime */
-#undef HAVE_CLOCK_GETTIME
-
-/* Have curses set_escdelay */
-#undef HAVE_CURSES_ESCDELAY
-
-/* Define if the GNU dcgettext() function is already present or preinstalled.
- */
-#undef HAVE_DCGETTEXT
-
-/* Define to 1 if you have the <form.h> header file. */
-#undef HAVE_FORM_H
-
-/* Define if the GNU gettext() function is already present or preinstalled. */
-#undef HAVE_GETTEXT
-
-/* Define if you have the iconv() function and it works. */
-#undef HAVE_ICONV
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `asound' library (-lasound). */
-#undef HAVE_LIBASOUND
-
-/* Have librt */
-#undef HAVE_LIBRT
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <menu.h> header file. */
-#undef HAVE_MENU_H
-
-/* Define to 1 if you have the <panel.h> header file. */
-#undef HAVE_PANEL_H
-
-/* Define to 1 if you have the <samplerate.h> header file. */
-#undef HAVE_SAMPLERATE_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* directory containing sample data */
-#undef SOUNDSDIR
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* ALSA util version */
-#undef VERSION
-
-/* Enable large inode numbers on Mac OS X 10.5. */
-#ifndef _DARWIN_USE_64_BIT_INODE
-# define _DARWIN_USE_64_BIT_INODE 1
-#endif
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-#undef inline
-#endif
diff --git a/include/version.h b/include/version.h
deleted file mode 100644
index cdda7cc..0000000
--- a/include/version.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * version.h
- */
-
-#define SND_UTIL_MAJOR 1
-#define SND_UTIL_MINOR 0
-#define SND_UTIL_SUBMINOR 27
-#define SND_UTIL_VERSION ((SND_UTIL_MAJOR<<16)|\
- (SND_UTIL_MINOR<<8)|\
- SND_UTIL_SUBMINOR)
-#define SND_UTIL_VERSION_STR "1.0.27.2"
-
diff --git a/install-sh b/install-sh
deleted file mode 100755
index 377bb86..0000000
--- a/install-sh
+++ /dev/null
@@ -1,527 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-11-20.07; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
- --help display this help and exit.
- --version display version info and exit.
-
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) ;;
-
- -C) copy_on_change=true;;
-
- -d) dir_arg=true;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
-
- -o) chowncmd="$chownprog $2"
- shift;;
-
- -s) stripcmd=$stripprog;;
-
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
-
- -T) no_target_directory=true;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
- shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dst_arg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
- shift # fnord
- fi
- shift # arg
- dst_arg=$arg
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call 'install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- do_exit='(exit $ret); exit $ret'
- trap "ret=129; $do_exit" 1
- trap "ret=130; $do_exit" 2
- trap "ret=141; $do_exit" 13
- trap "ret=143; $do_exit" 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names problematic for 'test' and other utilities.
- case $src in
- -* | [=\(\)!]) src=./$src;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dst_arg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
- dst=$dst_arg
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
- esac
-
- eval "$initialize_posix_glob"
-
- oIFS=$IFS
- IFS=/
- $posix_glob set -f
- set fnord $dstdir
- shift
- $posix_glob set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/m4/Makefile.am b/m4/Makefile.am
index f759917..0498b21 100644
--- a/m4/Makefile.am
+++ b/m4/Makefile.am
@@ -1 +1 @@
-EXTRA_DIST = gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 gettext.m4
+EXTRA_DIST = gettext.m4
diff --git a/m4/Makefile.in b/m4/Makefile.in
deleted file mode 100644
index e8150be..0000000
--- a/m4/Makefile.in
+++ /dev/null
@@ -1,403 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = m4
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-EXTRA_DIST = gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 gettext.m4
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign m4/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign m4/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/m4/gettext.m4 b/m4/gettext.m4
deleted file mode 100644
index f84e6a5..0000000
--- a/m4/gettext.m4
+++ /dev/null
@@ -1,383 +0,0 @@
-# gettext.m4 serial 63 (gettext-0.18)
-dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
-
-dnl Macro to add for using GNU gettext.
-
-dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
-dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
-dnl default (if it is not specified or empty) is 'no-libtool'.
-dnl INTLSYMBOL should be 'external' for packages with no intl directory,
-dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
-dnl If INTLSYMBOL is 'use-libtool', then a libtool library
-dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl depending on --{enable,disable}-{shared,static} and on the presence of
-dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
-dnl $(top_builddir)/intl/libintl.a will be created.
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl implementations (in libc or libintl) without the ngettext() function
-dnl will be ignored. If NEEDSYMBOL is specified and is
-dnl 'need-formatstring-macros', then GNU gettext implementations that don't
-dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
-dnl INTLDIR is used to find the intl libraries. If empty,
-dnl the value `$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl and used.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl Catalog format: none
-dnl Catalog extension: none
-dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_GNU_GETTEXT],
-[
- dnl Argument checking.
- ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
- [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
-])])])])])
- ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
- [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
- ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
- [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
-])])])])
- define([gt_included_intl],
- ifelse([$1], [external],
- ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
- [yes]))
- define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
- gt_NEEDS_INIT
- AM_GNU_GETTEXT_NEED([$2])
-
- AC_REQUIRE([AM_PO_SUBDIRS])dnl
- ifelse(gt_included_intl, yes, [
- AC_REQUIRE([AM_INTL_SUBDIR])dnl
- ])
-
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- dnl Ideally we would do this search only after the
- dnl if test "$USE_NLS" = "yes"; then
- dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
- dnl the configure script would need to contain the same shell code
- dnl again, outside any 'if'. There are two solutions:
- dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
- dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
- dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
- dnl documented, we avoid it.
- ifelse(gt_included_intl, yes, , [
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- ])
-
- dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
- gt_INTL_MACOSX
-
- dnl Set USE_NLS.
- AC_REQUIRE([AM_NLS])
-
- ifelse(gt_included_intl, yes, [
- BUILD_INCLUDED_LIBINTL=no
- USE_INCLUDED_LIBINTL=no
- ])
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- dnl Add a version number to the cache macros.
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
- ifelse(gt_included_intl, yes, [
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH([included-gettext],
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- ])
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If GNU gettext is available we use this. Else we have
- dnl to fall back to GNU NLS library.
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-changequote(,)dnl
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-changequote([,])dnl
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
- [AC_TRY_LINK([#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;],
- [bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings],
- [eval "$gt_func_gnugettext_libc=yes"],
- [eval "$gt_func_gnugettext_libc=no"])])
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- ifelse(gt_included_intl, yes, , [
- AM_ICONV_LINK
- ])
- dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
- dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
- dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
- dnl even if libiconv doesn't exist.
- AC_LIB_LINKFLAGS_BODY([intl])
- AC_CACHE_CHECK([for GNU gettext in libintl],
- [$gt_func_gnugettext_libintl],
- [gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- dnl Now see whether libintl exists and does not depend on libiconv.
- AC_TRY_LINK([#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);],
- [bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
- [eval "$gt_func_gnugettext_libintl=yes"],
- [eval "$gt_func_gnugettext_libintl=no"])
- dnl Now see whether libintl exists and depends on libiconv.
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- AC_TRY_LINK([#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);],
- [bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
- [LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
- ])
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"])
- fi
-
- dnl If an already present or preinstalled GNU gettext() is found,
- dnl use it. But if this macro is used in GNU gettext, and GNU
- dnl gettext is already preinstalled in libintl, we update this
- dnl libintl. (Cf. the install rule in intl/Makefile.in.)
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- dnl Reset the values set by searching for libintl.
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
- ifelse(gt_included_intl, yes, [
- if test "$gt_use_preinstalled_gnugettext" != "yes"; then
- dnl GNU gettext is not found in the C library.
- dnl Fall back on included GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- BUILD_INCLUDED_LIBINTL=yes
- USE_INCLUDED_LIBINTL=yes
- LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
- LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
- LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
- fi
-
- CATOBJEXT=
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions to use GNU gettext tools.
- CATOBJEXT=.gmo
- fi
- ])
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Some extra flags are needed during linking.
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- AC_DEFINE([ENABLE_NLS], [1],
- [Define to 1 if translation of program messages to the user's native language
- is requested.])
- else
- USE_NLS=no
- fi
- fi
-
- AC_MSG_CHECKING([whether to use NLS])
- AC_MSG_RESULT([$USE_NLS])
- if test "$USE_NLS" = "yes"; then
- AC_MSG_CHECKING([where the gettext function comes from])
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- AC_MSG_RESULT([$gt_source])
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- AC_MSG_CHECKING([how to link with libintl])
- AC_MSG_RESULT([$LIBINTL])
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
- fi
-
- dnl For backward compatibility. Some packages may be using this.
- AC_DEFINE([HAVE_GETTEXT], [1],
- [Define if the GNU gettext() function is already present or preinstalled.])
- AC_DEFINE([HAVE_DCGETTEXT], [1],
- [Define if the GNU dcgettext() function is already present or preinstalled.])
- fi
-
- dnl We need to process the po/ directory.
- POSUB=po
- fi
-
- ifelse(gt_included_intl, yes, [
- dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
- dnl to 'yes' because some of the testsuite requires it.
- if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
- BUILD_INCLUDED_LIBINTL=yes
- fi
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST([BUILD_INCLUDED_LIBINTL])
- AC_SUBST([USE_INCLUDED_LIBINTL])
- AC_SUBST([CATOBJEXT])
-
- dnl For backward compatibility. Some configure.ins may be using this.
- nls_cv_header_intl=
- nls_cv_header_libgt=
-
- dnl For backward compatibility. Some Makefiles may be using this.
- DATADIRNAME=share
- AC_SUBST([DATADIRNAME])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INSTOBJEXT=.mo
- AC_SUBST([INSTOBJEXT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- GENCAT=gencat
- AC_SUBST([GENCAT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLOBJS=
- if test "$USE_INCLUDED_LIBINTL" = yes; then
- INTLOBJS="\$(GETTOBJS)"
- fi
- AC_SUBST([INTLOBJS])
-
- dnl Enable libtool support if the surrounding package wishes it.
- INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
- AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
- ])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLLIBS="$LIBINTL"
- AC_SUBST([INTLLIBS])
-
- dnl Make all documented variables known to autoconf.
- AC_SUBST([LIBINTL])
- AC_SUBST([LTLIBINTL])
- AC_SUBST([POSUB])
-])
-
-
-dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
-m4_define([gt_NEEDS_INIT],
-[
- m4_divert_text([DEFAULTS], [gt_needs=])
- m4_define([gt_NEEDS_INIT], [])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
-AC_DEFUN([AM_GNU_GETTEXT_NEED],
-[
- m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
-AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff --git a/m4/iconv.m4 b/m4/iconv.m4
deleted file mode 100644
index e2041b9..0000000
--- a/m4/iconv.m4
+++ /dev/null
@@ -1,214 +0,0 @@
-# iconv.m4 serial 11 (gettext-0.18.1)
-dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- [am_cv_func_iconv=yes])
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- [am_cv_lib_iconv=yes]
- [am_cv_func_iconv=yes])
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
- dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_TRY_RUN([
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
- [case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE([HAVE_ICONV], [1],
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST([LIBICONV])
- AC_SUBST([LTLIBICONV])
-])
-
-dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
-dnl avoid warnings like
-dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
-dnl This is tricky because of the way 'aclocal' is implemented:
-dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
-dnl Otherwise aclocal's initial scan pass would miss the macro definition.
-dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
-dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
-dnl warnings.
-m4_define([gl_iconv_AC_DEFUN],
- m4_version_prereq([2.64],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [[AC_DEFUN(
- [$1], [$2])]]))
-gl_iconv_AC_DEFUN([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL([am_cv_proto_iconv], [
- AC_TRY_COMPILE([
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"])
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- AC_MSG_RESULT([
- $am_cv_proto_iconv])
- AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
- [Define as const if the declaration of iconv() needs const.])
- fi
-])
diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4
deleted file mode 100644
index ebb3052..0000000
--- a/m4/lib-ld.m4
+++ /dev/null
@@ -1,110 +0,0 @@
-# lib-ld.m4 serial 4 (gettext-0.18)
-dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL([acl_cv_path_LD],
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT([$LD])
-else
- AC_MSG_RESULT([no])
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
diff --git a/m4/lib-link.m4 b/m4/lib-link.m4
deleted file mode 100644
index c73bd8e..0000000
--- a/m4/lib-link.m4
+++ /dev/null
@@ -1,774 +0,0 @@
-# lib-link.m4 serial 21 (gettext-0.18)
-dnl Copyright (C) 2001-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ([2.54])
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[translit([$1],[./-], [___])])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- popdef([NAME])
- popdef([Name])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. The missing-message
-dnl defaults to 'no' and may contain additional hints for the user.
-dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
-dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[translit([$1],[./-], [___])])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
- dnl because these -l options might require -L options that are present in
- dnl LIBS. -l options benefit only from the -L options listed before it.
- dnl Otherwise, add it to the front of LIBS, because it may be a static
- dnl library that depends on another static library that is present in LIBS.
- dnl Static libraries benefit only from the static libraries listed after
- dnl it.
- case " $LIB[]NAME" in
- *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
- *) LIBS="$LIB[]NAME $LIBS" ;;
- esac
- AC_TRY_LINK([$3], [$4],
- [ac_cv_lib[]Name=yes],
- [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- popdef([NAME])
- popdef([Name])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE([rpath],
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_FROMPACKAGE(name, package)
-dnl declares that libname comes from the given package. The configure file
-dnl will then not have a --with-libname-prefix option but a
-dnl --with-package-prefix option. Several libraries can come from the same
-dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
-dnl macro call that searches for libname.
-AC_DEFUN([AC_LIB_FROMPACKAGE],
-[
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- define([acl_frompackage_]NAME, [$2])
- popdef([NAME])
- pushdef([PACK],[$2])
- pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- define([acl_libsinpackage_]PACKUP,
- m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1])
- popdef([PACKUP])
- popdef([PACK])
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
- pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
- dnl Autoconf >= 2.61 supports dots in --with options.
- pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_ARG_WITH(P_A_C_K[-prefix],
-[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib
- --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- LIB[]NAME[]_PREFIX=
- dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
- dnl computed. So it has to be reset here.
- HAVE_LIB[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
- popdef([P_A_C_K])
- popdef([PACKLIBS])
- popdef([PACKUP])
- popdef([PACK])
- popdef([NAME])
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4
deleted file mode 100644
index 1601cea..0000000
--- a/m4/lib-prefix.m4
+++ /dev/null
@@ -1,224 +0,0 @@
-# lib-prefix.m4 serial 7 (gettext-0.18)
-dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates
-dnl - a variable acl_libdirstem, containing the basename of the libdir, either
-dnl "lib" or "lib64" or "lib/64",
-dnl - a variable acl_libdirstem2, as a secondary possible value for
-dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
-dnl "lib/amd64".
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib and lib64.
- dnl On glibc systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
- dnl the compiler's default mode by looking at the compiler's library search
- dnl path. If at least one of its elements ends in /lib64 or points to a
- dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
- dnl Otherwise we use the default, namely "lib".
- dnl On Solaris systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
- dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
- AC_REQUIRE([AC_CANONICAL_HOST])
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
- dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
- dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
- dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
- dnl symlink is missing, so we set acl_libdirstem2 too.
- AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
- [AC_EGREP_CPP([sixtyfour bits], [
-#ifdef _LP64
-sixtyfour bits
-#endif
- ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
- ])
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-])
diff --git a/m4/nls.m4 b/m4/nls.m4
deleted file mode 100644
index 003704c..0000000
--- a/m4/nls.m4
+++ /dev/null
@@ -1,32 +0,0 @@
-# nls.m4 serial 5 (gettext-0.18)
-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_NLS],
-[
- AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE([nls],
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT([$USE_NLS])
- AC_SUBST([USE_NLS])
-])
diff --git a/m4/po.m4 b/m4/po.m4
deleted file mode 100644
index 47f36a4..0000000
--- a/m4/po.m4
+++ /dev/null
@@ -1,449 +0,0 @@
-# po.m4 serial 17 (gettext-0.18)
-dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-dnl Checks for all prerequisites of the po subdirectory.
-AC_DEFUN([AM_PO_SUBDIRS],
-[
- AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
- AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
- AC_REQUIRE([AM_NLS])dnl
-
- dnl Release version of the gettext macros. This is used to ensure that
- dnl the gettext macros and po/Makefile.in.in are in sync.
- AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
-
- dnl Perform the following tests also if --disable-nls has been given,
- dnl because they are needed for "make dist" to work.
-
- dnl Search for GNU msgfmt in the PATH.
- dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
- dnl The second test excludes FreeBSD msgfmt.
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
-
- dnl Test whether it is GNU msgfmt >= 0.15.
-changequote(,)dnl
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([MSGFMT_015])
-changequote(,)dnl
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([GMSGFMT_015])
-
- dnl Search for GNU xgettext 0.12 or newer in the PATH.
- dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
- dnl The second test excludes FreeBSD xgettext.
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- dnl Remove leftover from FreeBSD xgettext call.
- rm -f messages.po
-
- dnl Test whether it is GNU xgettext >= 0.15.
-changequote(,)dnl
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-changequote([,])dnl
- AC_SUBST([XGETTEXT_015])
-
- dnl Search for GNU msgmerge 0.11 or newer in the PATH.
- AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
- [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
-
- dnl Installation directories.
- dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
- dnl have to define it here, so that it can be used in po/Makefile.
- test -n "$localedir" || localedir='${datadir}/locale'
- AC_SUBST([localedir])
-
- dnl Support for AM_XGETTEXT_OPTION.
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
-
- AC_CONFIG_COMMANDS([po-directories], [[
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done]],
- [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
- ])
-])
-
-dnl Postprocesses a Makefile in a directory containing PO files.
-AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-[
- # When this code is run, in config.status, two variables have already been
- # set:
- # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
- # - LINGUAS is the value of the environment variable LINGUAS at configure
- # time.
-
-changequote(,)dnl
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- # Find a way to echo strings without interpreting backslash.
- if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='echo'
- else
- if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='printf %s\n'
- else
- echo_func () {
- cat <<EOT
-$*
-EOT
- }
- gt_echo='echo_func'
- fi
- fi
-
- # A sed script that extracts the value of VARIABLE from a Makefile.
- sed_x_variable='
-# Test if the hold space is empty.
-x
-s/P/P/
-x
-ta
-# Yes it was empty. Look if we have the expected variable definition.
-/^[ ]*VARIABLE[ ]*=/{
- # Seen the first line of the variable definition.
- s/^[ ]*VARIABLE[ ]*=//
- ba
-}
-bd
-:a
-# Here we are processing a line from the variable definition.
-# Remove comment, more precisely replace it with a space.
-s/#.*$/ /
-# See if the line ends in a backslash.
-tb
-:b
-s/\\$//
-# Print the line, without the trailing backslash.
-p
-tc
-# There was no trailing backslash. The end of the variable definition is
-# reached. Clear the hold space.
-s/^.*$//
-x
-bd
-:c
-# A trailing backslash means that the variable definition continues in the
-# next line. Put a nonempty string into the hold space to indicate this.
-s/^.*$/P/
-x
-:d
-'
-changequote([,])dnl
-
- # Set POTFILES to the value of the Makefile variable POTFILES.
- sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
- POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
- # Compute POTFILES_DEPS as
- # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
- POTFILES_DEPS=
- for file in $POTFILES; do
- POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
- done
- POMAKEFILEDEPS=""
-
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
- sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
- ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
- fi
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- # Compute PROPERTIESFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
- # Compute CLASSFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
- # Compute QMFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
- # Compute MSGFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
- # Compute RESOURCESDLLFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- PROPERTIESFILES=
- CLASSFILES=
- QMFILES=
- MSGFILES=
- RESOURCESDLLFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
- CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
- QMFILES="$QMFILES $srcdirpre$lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- JAVACATALOGS=
- QTCATALOGS=
- TCLCATALOGS=
- CSHARPCATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
- QTCATALOGS="$QTCATALOGS $lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
- done
- fi
-
- sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
- if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang.msg: $lang.po
- @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
- \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
- @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
- \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if test -n "$POMAKEFILEDEPS"; then
- cat >> "$ac_file.tmp" <<EOF
-Makefile: $POMAKEFILEDEPS
-EOF
- fi
- mv "$ac_file.tmp" "$ac_file"
-])
-
-dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
-AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
-[
- XGETTEXT_EXTRA_OPTIONS=
-])
-
-dnl Registers an option to be passed to xgettext in the po subdirectory.
-AC_DEFUN([AM_XGETTEXT_OPTION],
-[
- AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
-])
diff --git a/m4/progtest.m4 b/m4/progtest.m4
deleted file mode 100644
index 2d804ac..0000000
--- a/m4/progtest.m4
+++ /dev/null
@@ -1,92 +0,0 @@
-# progtest.m4 serial 6 (gettext-0.18)
-dnl Copyright (C) 1996-2003, 2005, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-AC_PREREQ([2.50])
-
-# Search path for a program which passes the given test.
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL([ac_cv_path_$1],
-[case "[$]$1" in
- [[\\/]]* | ?:[[\\/]]*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$][$1])
-else
- AC_MSG_RESULT([no])
-fi
-AC_SUBST([$1])dnl
-])
diff --git a/missing b/missing
deleted file mode 100755
index 9a55648..0000000
--- a/missing
+++ /dev/null
@@ -1,330 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2012-01-06.18; # UTC
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, 'missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file 'aclocal.m4'
- autoconf touch file 'configure'
- autoheader touch file 'config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all 'Makefile.in' files
- bison create 'y.tab.[ch]', if possible, from existing .[ch]
- flex create 'lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create 'lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create 'y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running '$TOOL --version' or '$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acinclude.m4' or '${configure_ac}'. You might want
- to install the Automake and Perl packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified '${configure_ac}'. You might want to install the
- Autoconf and GNU m4 packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acconfig.h' or '${configure_ac}'. You might want
- to install the Autoconf and GNU m4 packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
- You might want to install the Automake and Perl packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: '$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get '$1' as part of Autoconf from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: '$1' $msg. You should only need it if
- you modified a '.y' file. You may need the Bison package
- in order for those modifications to take effect. You can get
- Bison from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.l' file. You may need the Flex package
- in order for those modifications to take effect. You can get
- Flex from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- Help2man package in order for those modifications to take
- effect. You can get Help2man from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.texi' or '.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy 'make' (AIX,
- DU, IRIX). You might want to install the Texinfo package or
- the GNU make package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: '$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the 'README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing '$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
deleted file mode 100644
index 83d8838..0000000
--- a/po/Makefile.in.in
+++ /dev/null
@@ -1,444 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.18
-GETTEXT_MACRO_VERSION = 0.18
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-localedir = @localedir@
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-
-# We use $(mkdir_p).
-# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
-# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
-# @install_sh@ does not start with $(SHELL), so we add it.
-# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
-# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
-# versions, $(mkinstalldirs) and $(install_sh) are unused.
-mkinstalldirs = $(SHELL) @install_sh@ -d
-install_sh = $(SHELL) @install_sh@
-MKDIR_P = @MKDIR_P@
-mkdir_p = @mkdir_p@
-
-GMSGFMT_ = @GMSGFMT@
-GMSGFMT_no = @GMSGFMT@
-GMSGFMT_yes = @GMSGFMT_015@
-GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
-MSGFMT_ = @MSGFMT@
-MSGFMT_no = @MSGFMT@
-MSGFMT_yes = @MSGFMT_015@
-MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
-XGETTEXT_ = @XGETTEXT@
-XGETTEXT_no = @XGETTEXT@
-XGETTEXT_yes = @XGETTEXT_015@
-XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
-
-.po.mo:
- @echo "$(MSGFMT) -c -o $@ $<"; \
- $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
- @lang=`echo $* | sed -e 's,.*/,,'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
- sed -e '/^#/d' $< > t-$@
- mv t-$@ $@
-
-
-all: check-macro-version all-@USE_NLS@
-
-all-yes: stamp-po
-all-no:
-
-# Ensure that the gettext macros and this Makefile.in.in are in sync.
-check-macro-version:
- @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
- || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
- exit 1; \
- }
-
-# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
-# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
-# we don't want to bother translators with empty POT files). We assume that
-# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
-# In this case, stamp-po is a nop (i.e. a phony target).
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
- test ! -f $(srcdir)/$(DOMAIN).pot || \
- test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
- @test ! -f $(srcdir)/$(DOMAIN).pot || { \
- echo "touch stamp-po" && \
- echo timestamp > stamp-poT && \
- mv stamp-poT stamp-po; \
- }
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
- if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
- package_gnu='GNU '; \
- else \
- package_gnu=''; \
- fi; \
- if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
- msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
- else \
- msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
- fi; \
- case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- ;; \
- *) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --package-name="$${package_gnu}@PACKAGE@" \
- --package-version='@VERSION@' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- ;; \
- esac
- test ! -f $(DOMAIN).po || { \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
- sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
- if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
- else \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- else \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- }
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
- $(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
- @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- if test -f "$(srcdir)/$${lang}.po"; then \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) \
- && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
- esac; \
- }; \
- else \
- $(MAKE) $${lang}.po-create; \
- fi
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common) Makevars.template; do \
- $(INSTALL_DATA) $(srcdir)/$$file \
- $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- for file in Makevars; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-install-data-no: all
-install-data-yes: all
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
- $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
- echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
- fi; \
- done; \
- done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-installdirs-data-no:
-installdirs-data-yes:
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- fi; \
- done; \
- done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- for file in $(DISTFILES.common) Makevars.template; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-uninstall-data-no:
-uninstall-data-yes:
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- done; \
- done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
- rm -f remove-potcdate.sed
- rm -f stamp-poT
- rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
- rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
- rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
- rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
- $(MAKE) update-po
- @$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: stamp-po $(DISTFILES)
- dists="$(DISTFILES)"; \
- if test "$(PACKAGE)" = "gettext-tools"; then \
- dists="$$dists Makevars.template"; \
- fi; \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- dists="$$dists $(DOMAIN).pot stamp-po"; \
- fi; \
- if test -f $(srcdir)/ChangeLog; then \
- dists="$$dists ChangeLog"; \
- fi; \
- for i in 0 1 2 3 4 5 6 7 8 9; do \
- if test -f $(srcdir)/ChangeLog.$$i; then \
- dists="$$dists ChangeLog.$$i"; \
- fi; \
- done; \
- if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
- for file in $$dists; do \
- if test -f $$file; then \
- cp -p $$file $(distdir) || exit 1; \
- else \
- cp -p $(srcdir)/$$file $(distdir) || exit 1; \
- fi; \
- done
-
-update-po: Makefile
- $(MAKE) $(DOMAIN).pot-update
- test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
- $(MAKE) update-gmo
-
-# General rule for creating PO files.
-
-.nop.po-create:
- @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
- echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
- exit 1
-
-# General rule for updating PO files.
-
-.nop.po-update:
- @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
- cd $(srcdir); \
- if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- esac; \
- }; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "msgmerge for $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
- @:
-
-# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
-# because execution permission bits may not work on the current file system.
-# Use @SHELL@, which is the shell determined by autoconf for the use by its
-# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
-Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
- cd $(top_builddir) \
- && @SHELL@ ./config.status $(subdir)/$@.in po-directories
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/po/Rules-quot b/po/Rules-quot
deleted file mode 100644
index af52487..0000000
--- a/po/Rules-quot
+++ /dev/null
@@ -1,47 +0,0 @@
-# Special Makefile rules for English message catalogs with quotation marks.
-
-DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
-
-.SUFFIXES: .insert-header .po-update-en
-
-en@quot.po-create:
- $(MAKE) en@quot.po-update
-en@boldquot.po-create:
- $(MAKE) en@boldquot.po-update
-
-en@quot.po-update: en@quot.po-update-en
-en@boldquot.po-update: en@boldquot.po-update-en
-
-.insert-header.po-update-en:
- @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
- if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- ll=`echo $$lang | sed -e 's/@.*//'`; \
- LC_ALL=C; export LC_ALL; \
- cd $(srcdir); \
- if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "creation of $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-en@quot.insert-header: insert-header.sin
- sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
-
-en@boldquot.insert-header: insert-header.sin
- sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
-
-mostlyclean: mostlyclean-quot
-mostlyclean-quot:
- rm -f *.insert-header
diff --git a/po/alsa-utils.pot b/po/alsa-utils.pot
deleted file mode 100644
index e153aa1..0000000
--- a/po/alsa-utils.pot
+++ /dev/null
@@ -1,1528 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR The ALSA Team
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: alsa-utils 1.0.27.2\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-07-10 09:29+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: alsamixer/card_select.c:126 alsamixer/device_name.c:126
-msgid "Sound Card"
-msgstr ""
-
-#: alsamixer/card_select.c:181
-msgid "(default)"
-msgstr ""
-
-#: alsamixer/card_select.c:191
-msgid "cannot enumerate sound cards"
-msgstr ""
-
-#: alsamixer/card_select.c:215
-msgid "enter device name..."
-msgstr ""
-
-#: alsamixer/cli.c:40
-msgid "Usage: alsamixer [options]"
-msgstr ""
-
-#: alsamixer/cli.c:41
-msgid ""
-"Useful options:\n"
-" -h, --help this help\n"
-" -c, --card=NUMBER sound card number or id\n"
-" -D, --device=NAME mixer device name\n"
-" -V, --view=MODE starting view mode: playback/capture/all"
-msgstr ""
-
-#: alsamixer/cli.c:46
-msgid ""
-"Debugging options:\n"
-" -g, --no-color toggle using of colors\n"
-" -a, --abstraction=NAME mixer abstraction level: none/basic"
-msgstr ""
-
-#: alsamixer/cli.c:77
-#, c-format
-msgid "invalid card index: %s\n"
-msgstr ""
-
-#: alsamixer/cli.c:103
-#, c-format
-msgid "unknown abstraction level: %s\n"
-msgstr ""
-
-#: alsamixer/cli.c:108
-#, c-format
-msgid "unknown option: %c\n"
-msgstr ""
-
-#: alsamixer/cli.c:110
-msgid "try `alsamixer --help' for more information\n"
-msgstr ""
-
-#: alsamixer/device_name.c:177
-msgid "Device name:"
-msgstr ""
-
-#: alsamixer/die.c:37
-#, c-format
-msgid "%s: %s\n"
-msgstr ""
-
-#: alsamixer/mixer_display.c:98
-msgid "Card:"
-msgstr ""
-
-#: alsamixer/mixer_display.c:99
-msgid "Chip:"
-msgstr ""
-
-#: alsamixer/mixer_display.c:100
-msgid "View:"
-msgstr ""
-
-#: alsamixer/mixer_display.c:101
-msgid "Item:"
-msgstr ""
-
-#: alsamixer/mixer_display.c:104
-msgid "F1: Help"
-msgstr ""
-
-#: alsamixer/mixer_display.c:105
-msgid "F2: System information"
-msgstr ""
-
-#: alsamixer/mixer_display.c:106
-msgid "F6: Select sound card"
-msgstr ""
-
-#: alsamixer/mixer_display.c:107
-msgid "Esc: Exit"
-msgstr ""
-
-#: alsamixer/mixer_display.c:174
-msgid "(unplugged)"
-msgstr ""
-
-#: alsamixer/mixer_display.c:192
-msgid "Playback"
-msgstr ""
-
-#: alsamixer/mixer_display.c:193
-msgid "Capture"
-msgstr ""
-
-#: alsamixer/mixer_display.c:194
-msgid "All"
-msgstr ""
-
-#: alsamixer/mixer_display.c:234
-msgid "mute"
-msgstr ""
-
-#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
-msgid "dB gain:"
-msgstr ""
-
-#: alsamixer/mixer_display.c:285
-#, c-format
-msgid " [%s %s, %s]"
-msgstr ""
-
-#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
-#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
-msgid "Off"
-msgstr ""
-
-#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
-msgid "On"
-msgstr ""
-
-#: alsamixer/mixer_display.c:363
-msgid "The sound device was unplugged."
-msgstr ""
-
-#: alsamixer/mixer_display.c:364
-msgid "Press F6 to select another sound card."
-msgstr ""
-
-#: alsamixer/mixer_display.c:379
-msgid "This sound device does not have any playback controls."
-msgstr ""
-
-#: alsamixer/mixer_display.c:381
-msgid "This sound device does not have any capture controls."
-msgstr ""
-
-#: alsamixer/mixer_display.c:383
-msgid "This sound device does not have any controls."
-msgstr ""
-
-#. TRANSLATORS: playback on; one character
-#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
-msgid "O"
-msgstr ""
-
-#. TRANSLATORS: playback muted; one character
-#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
-msgid "M"
-msgstr ""
-
-#. TRANSLATORS: "left"; no more than two characters
-#: alsamixer/mixer_display.c:536
-msgid "L"
-msgstr ""
-
-#. TRANSLATORS: "right"; no more than two characters
-#: alsamixer/mixer_display.c:540
-msgid "R"
-msgstr ""
-
-#. TRANSLATORS: no more than eight characters
-#: alsamixer/mixer_display.c:542
-msgid "CAPTURE"
-msgstr ""
-
-#: alsamixer/mixer_display.c:592
-msgid "Front"
-msgstr ""
-
-#: alsamixer/mixer_display.c:595
-msgid "Rear"
-msgstr ""
-
-#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
-msgid "Center"
-msgstr ""
-
-#: alsamixer/mixer_display.c:601
-msgid "Woofer"
-msgstr ""
-
-#: alsamixer/mixer_display.c:604
-msgid "Side"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
-msgid "cannot open mixer"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
-msgid "cannot load mixer controls"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:169
-#, c-format
-msgid "Cannot open mixer device '%s'."
-msgstr ""
-
-#: alsamixer/mixer_widget.c:190
-msgid "Esc Exit"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:191
-msgid "F1 ? H Help"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:192
-msgid "F2 / System information"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:193
-msgid "F3 Show playback controls"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:194
-msgid "F4 Show capture controls"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:195
-msgid "F5 Show all controls"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:196
-msgid "Tab Toggle view mode (F3/F4/F5)"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:197
-msgid "F6 S Select sound card"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:198
-msgid "L Redraw screen"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:200
-msgid "Left Move to the previous control"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:201
-msgid "Right Move to the next control"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:203
-msgid "Up/Down Change volume"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:204
-msgid "+ - Change volume"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:205
-msgid "Page Up/Dn Change volume in big steps"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:206
-msgid "End Set volume to 0%"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:207
-msgid "0-9 Set volume to 0%-90%"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:208
-msgid "Q W E Increase left/both/right volumes"
-msgstr ""
-
-#. TRANSLATORS: or Y instead of Z
-#: alsamixer/mixer_widget.c:210
-msgid "Z X C Decrease left/both/right volumes"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:211
-msgid "B Balance left and right volumes"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:213
-msgid "M Toggle mute"
-msgstr ""
-
-#. TRANSLATORS: or , .
-#: alsamixer/mixer_widget.c:215
-msgid "< > Toggle left/right mute"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:217
-msgid "Space Toggle capture"
-msgstr ""
-
-#. TRANSLATORS: or Insert Delete
-#: alsamixer/mixer_widget.c:219
-msgid "; ' Toggle left/right capture"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:221
-msgid "Authors:"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:222
-msgid " Tim Janik"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:223
-msgid " Jaroslav Kysela <perex@perex.cz>"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:224
-msgid " Clemens Ladisch <clemens@ladisch.de>"
-msgstr ""
-
-#: alsamixer/mixer_widget.c:226
-msgid "Help"
-msgstr ""
-
-#: alsamixer/proc_files.c:103
-msgid "Select File"
-msgstr ""
-
-#: alsamixer/textbox.c:52 alsamixer/textbox.c:66
-msgid "Error"
-msgstr ""
-
-#: alsamixer/textbox.c:80
-#, c-format
-msgid "Cannot open file \"%s\"."
-msgstr ""
-
-#: aplay/aplay.c:175
-msgid "raw data"
-msgstr ""
-
-#: aplay/aplay.c:176
-msgid "VOC"
-msgstr ""
-
-#: aplay/aplay.c:178
-msgid "WAVE"
-msgstr ""
-
-#: aplay/aplay.c:179
-msgid "Sparc Audio"
-msgstr ""
-
-#: aplay/aplay.c:200
-#, c-format
-msgid ""
-"Usage: %s [OPTION]... [FILE]...\n"
-"\n"
-"-h, --help help\n"
-" --version print current version\n"
-"-l, --list-devices list all soundcards and digital audio devices\n"
-"-L, --list-pcms list device names\n"
-"-D, --device=NAME select PCM by name\n"
-"-q, --quiet quiet mode\n"
-"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
-"-c, --channels=# channels\n"
-"-f, --format=FORMAT sample format (case insensitive)\n"
-"-r, --rate=# sample rate\n"
-"-d, --duration=# interrupt after # seconds\n"
-"-M, --mmap mmap stream\n"
-"-N, --nonblock nonblocking mode\n"
-"-F, --period-time=# distance between interrupts is # microseconds\n"
-"-B, --buffer-time=# buffer duration is # microseconds\n"
-" --period-size=# distance between interrupts is # frames\n"
-" --buffer-size=# buffer duration is # frames\n"
-"-A, --avail-min=# min available space for wakeup is # microseconds\n"
-"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
-" (relative to buffer size if <= 0)\n"
-"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from "
-"xrun\n"
-"-v, --verbose show PCM structure and setup (accumulative)\n"
-"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
-"-I, --separate-channels one file for each channel\n"
-"-i, --interactive allow interactive operation from stdin\n"
-"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
-" --disable-resample disable automatic rate resample\n"
-" --disable-channels disable automatic channel conversions\n"
-" --disable-format disable automatic format conversions\n"
-" --disable-softvol disable software volume control (softvol)\n"
-" --test-position test ring buffer position\n"
-" --test-coef=# test coefficient for ring buffer position (default "
-"8)\n"
-" expression for validation is: coef * (buffer_size / "
-"2)\n"
-" --test-nowait do not wait for ring buffer - eats whole CPU\n"
-" --max-file-time=# start another output file when the old file has "
-"recorded\n"
-" for this many seconds\n"
-" --process-id-file write the process ID here\n"
-" --use-strftime apply the strftime facility to the output file name\n"
-" --dump-hw-params dump hw_params of the device\n"
-" --fatal-errors treat all errors as fatal\n"
-msgstr ""
-
-#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
-#, c-format
-msgid "Recognized sample formats are:"
-msgstr ""
-
-#: aplay/aplay.c:250
-#, c-format
-msgid ""
-"\n"
-"Some of these may not be available on selected hardware\n"
-msgstr ""
-
-#: aplay/aplay.c:251
-#, c-format
-msgid "The available format shortcuts are:\n"
-msgstr ""
-
-#: aplay/aplay.c:252
-#, c-format
-msgid "-f cd (16 bit little endian, 44100, stereo)\n"
-msgstr ""
-
-#: aplay/aplay.c:253
-#, c-format
-msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
-msgstr ""
-
-#: aplay/aplay.c:254
-#, c-format
-msgid "-f dat (16 bit little endian, 48000, stereo)\n"
-msgstr ""
-
-#: aplay/aplay.c:268
-msgid "no soundcards found..."
-msgstr ""
-
-#: aplay/aplay.c:271
-#, c-format
-msgid "**** List of %s Hardware Devices ****\n"
-msgstr ""
-
-#: aplay/aplay.c:300
-#, c-format
-msgid "card %i: %s [%s], device %i: %s [%s]\n"
-msgstr ""
-
-#: aplay/aplay.c:306
-#, c-format
-msgid " Subdevices: %i/%i\n"
-msgstr ""
-
-#: aplay/aplay.c:313
-#, c-format
-msgid " Subdevice #%i: %s\n"
-msgstr ""
-
-#: aplay/aplay.c:394
-#, c-format
-msgid "Aborted by signal %s...\n"
-msgstr ""
-
-#: aplay/aplay.c:512
-msgid "command should be named either arecord or aplay"
-msgstr ""
-
-#: aplay/aplay.c:556
-#, c-format
-msgid "unrecognized file format %s"
-msgstr ""
-
-#: aplay/aplay.c:563
-#, c-format
-msgid "value %i for channels is invalid"
-msgstr ""
-
-#: aplay/aplay.c:582
-#, c-format
-msgid "wrong extended format '%s'"
-msgstr ""
-
-#: aplay/aplay.c:593
-#, c-format
-msgid "bad speed value %i"
-msgstr ""
-
-#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
-#, c-format
-msgid "Unable to parse channel map string: %s\n"
-msgstr ""
-
-#: aplay/aplay.c:706
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr ""
-
-#: aplay/aplay.c:722
-#, c-format
-msgid "audio open error: %s"
-msgstr ""
-
-#: aplay/aplay.c:727
-#, c-format
-msgid "info error: %s"
-msgstr ""
-
-#: aplay/aplay.c:734
-#, c-format
-msgid "nonblock setting error: %s"
-msgstr ""
-
-#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
-#: aplay/aplay.c:1867 aplay/aplay.c:1897
-msgid "not enough memory"
-msgstr ""
-
-#: aplay/aplay.c:768
-#, c-format
-msgid "Cannot create process ID file %s: %s"
-msgstr ""
-
-#: aplay/aplay.c:858
-#, c-format
-msgid "read error (called from line %i)"
-msgstr ""
-
-#: aplay/aplay.c:925
-#, c-format
-msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
-msgstr ""
-
-#: aplay/aplay.c:936
-#, c-format
-msgid ""
-"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
-msgstr ""
-
-#: aplay/aplay.c:941
-msgid "wrong format tag in extensible 'fmt ' chunk"
-msgstr ""
-
-#: aplay/aplay.c:948
-#, c-format
-msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
-msgstr ""
-
-#: aplay/aplay.c:953
-#, c-format
-msgid "can't play WAVE-files with %d tracks"
-msgstr ""
-
-#: aplay/aplay.c:961 aplay/aplay.c:1087
-#, c-format
-msgid "Warning: format is changed to U8\n"
-msgstr ""
-
-#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
-#, c-format
-msgid "Warning: format is changed to %s\n"
-msgstr ""
-
-#: aplay/aplay.c:1000
-#, c-format
-msgid ""
-" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
-msgstr ""
-
-#: aplay/aplay.c:1023
-#, c-format
-msgid " can't play WAVE-files with sample %d bits wide"
-msgstr ""
-
-#: aplay/aplay.c:1081
-#, c-format
-msgid "Warning: format is changed to MU_LAW\n"
-msgstr ""
-
-#: aplay/aplay.c:1093
-#, c-format
-msgid "Warning: format is changed to S16_BE\n"
-msgstr ""
-
-#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
-#: aplay/aplay.c:2727
-msgid "read error"
-msgstr ""
-
-#: aplay/aplay.c:1136
-msgid "Channel numbers don't match between hw_params and channel map"
-msgstr ""
-
-#: aplay/aplay.c:1145
-#, c-format
-msgid "Warning: unable to get channel map\n"
-msgstr ""
-
-#: aplay/aplay.c:1178
-#, c-format
-msgid "Channel %d doesn't match with hw_parmas"
-msgstr ""
-
-#: aplay/aplay.c:1204
-msgid "Broken configuration for this PCM: no configurations available"
-msgstr ""
-
-#: aplay/aplay.c:1208
-#, c-format
-msgid "HW Params of device \"%s\":\n"
-msgstr ""
-
-#: aplay/aplay.c:1228
-msgid "Access type not available"
-msgstr ""
-
-#: aplay/aplay.c:1233
-msgid "Sample format non available"
-msgstr ""
-
-#: aplay/aplay.c:1239
-msgid "Channels count non available"
-msgstr ""
-
-#: aplay/aplay.c:1254
-#, c-format
-msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
-msgstr ""
-
-#: aplay/aplay.c:1260
-#, c-format
-msgid " please, try the plug plugin %s\n"
-msgstr ""
-
-#: aplay/aplay.c:1297
-msgid "Unable to install hw params:"
-msgstr ""
-
-#: aplay/aplay.c:1304
-#, c-format
-msgid "Can't use period equal to buffer size (%lu == %lu)"
-msgstr ""
-
-#: aplay/aplay.c:1335
-msgid "unable to install sw params:"
-msgstr ""
-
-#: aplay/aplay.c:1369
-#, c-format
-msgid "snd_pcm_mmap_begin problem: %s"
-msgstr ""
-
-#: aplay/aplay.c:1398
-#, c-format
-msgid "stdin O_NONBLOCK flag setup failed\n"
-msgstr ""
-
-#: aplay/aplay.c:1422
-#, c-format
-msgid "\rPAUSE command ignored (no hw support)\n"
-msgstr ""
-
-#: aplay/aplay.c:1427
-#, c-format
-msgid "pause push error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1436
-#, c-format
-msgid "pause release error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1452
-#, c-format
-msgid ""
-"\r=== PAUSE === "
-msgstr ""
-
-#: aplay/aplay.c:1494
-#, c-format
-msgid "status error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1499
-#, c-format
-msgid "fatal %s: %s"
-msgstr ""
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
-msgid "underrun"
-msgstr ""
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
-msgid "overrun"
-msgstr ""
-
-#: aplay/aplay.c:1510 aplay/aplay.c:1521
-#, c-format
-msgid "%s!!! (at least %.3f ms long)\n"
-msgstr ""
-
-#: aplay/aplay.c:1526
-#, c-format
-msgid "Status:\n"
-msgstr ""
-
-#: aplay/aplay.c:1530
-#, c-format
-msgid "xrun: prepare error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1536
-#, c-format
-msgid "Status(DRAINING):\n"
-msgstr ""
-
-#: aplay/aplay.c:1540
-#, c-format
-msgid "capture stream format change? attempting recover...\n"
-msgstr ""
-
-#: aplay/aplay.c:1542
-#, c-format
-msgid "xrun(DRAINING): prepare error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1549
-#, c-format
-msgid "Status(R/W):\n"
-msgstr ""
-
-#: aplay/aplay.c:1552
-#, c-format
-msgid "read/write error, state = %s"
-msgstr ""
-
-#: aplay/aplay.c:1562
-#, c-format
-msgid "Suspended. Trying resume. "
-msgstr ""
-
-#: aplay/aplay.c:1567
-#, c-format
-msgid "Failed. Restarting stream. "
-msgstr ""
-
-#: aplay/aplay.c:1569
-#, c-format
-msgid "suspend: prepare error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1574
-#, c-format
-msgid "Done.\n"
-msgstr ""
-
-#: aplay/aplay.c:1596
-#, c-format
-msgid " !clip "
-msgstr ""
-
-#: aplay/aplay.c:1743
-#, c-format
-msgid "Unsupported bit size %d.\n"
-msgstr ""
-
-#: aplay/aplay.c:1777
-#, c-format
-msgid "Max peak (%li samples): 0x%08x "
-msgstr ""
-
-#: aplay/aplay.c:1811
-#, c-format
-msgid ""
-"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
-"%li\n"
-msgstr ""
-
-#: aplay/aplay.c:1939
-#, c-format
-msgid "write error: %s"
-msgstr ""
-
-#: aplay/aplay.c:1987
-#, c-format
-msgid "writev error: %s"
-msgstr ""
-
-#: aplay/aplay.c:2031
-#, c-format
-msgid "read error: %s"
-msgstr ""
-
-#: aplay/aplay.c:2075
-#, c-format
-msgid "readv error: %s"
-msgstr ""
-
-#: aplay/aplay.c:2123
-msgid "can't allocate buffer for silence"
-msgstr ""
-
-#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
-#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
-#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
-msgid "write error"
-msgstr ""
-
-#: aplay/aplay.c:2145
-#, c-format
-msgid "voc_pcm_flush - silence error"
-msgstr ""
-
-#: aplay/aplay.c:2148
-msgid "voc_pcm_flush error"
-msgstr ""
-
-#: aplay/aplay.c:2173
-msgid "malloc error"
-msgstr ""
-
-#: aplay/aplay.c:2177
-#, c-format
-msgid "Playing Creative Labs Channel file '%s'...\n"
-msgstr ""
-
-#: aplay/aplay.c:2245 aplay/aplay.c:2340
-msgid "can't play packed .voc files"
-msgstr ""
-
-#: aplay/aplay.c:2300
-#, c-format
-msgid "can't play loops; %s isn't seekable\n"
-msgstr ""
-
-#: aplay/aplay.c:2349
-#, c-format
-msgid "unknown blocktype %d. terminate."
-msgstr ""
-
-#: aplay/aplay.c:2480
-#, c-format
-msgid "Wave doesn't support %s format..."
-msgstr ""
-
-#: aplay/aplay.c:2540
-#, c-format
-msgid "Sparc Audio doesn't support %s format..."
-msgstr ""
-
-#: aplay/aplay.c:2621
-msgid "Playing"
-msgstr ""
-
-#: aplay/aplay.c:2621
-msgid "Recording"
-msgstr ""
-
-#: aplay/aplay.c:2625
-#, c-format
-msgid "Rate %d Hz, "
-msgstr ""
-
-#: aplay/aplay.c:2627
-#, c-format
-msgid "Mono"
-msgstr ""
-
-#: aplay/aplay.c:2629
-#, c-format
-msgid "Stereo"
-msgstr ""
-
-#: aplay/aplay.c:2631
-#, c-format
-msgid "Channels %i"
-msgstr ""
-
-#: aplay/aplay.c:3145 aplay/aplay.c:3198
-#, c-format
-msgid "You need to specify %d files"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:49
-#, c-format
-msgid "aconnect - ALSA sequencer connection manager\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:50
-#, c-format
-msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:51
-#, c-format
-msgid "Usage:\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:52
-#, c-format
-msgid " * Connection/disconnection between two ports\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:53
-#, c-format
-msgid " aconnect [-options] sender receiver\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:54
-#, c-format
-msgid " sender, receiver = client:port pair\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:55
-#, c-format
-msgid " -d,--disconnect disconnect\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:56
-#, c-format
-msgid " -e,--exclusive exclusive connection\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:57
-#, c-format
-msgid " -r,--real # convert real-time-stamp on queue\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:58
-#, c-format
-msgid " -t,--tick # convert tick-time-stamp on queue\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:59
-#, c-format
-msgid " * List connected ports (no subscription action)\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:60
-#, c-format
-msgid " aconnect -i|-o [-options]\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:61
-#, c-format
-msgid " -i,--input list input (readable) ports\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:62
-#, c-format
-msgid " -o,--output list output (writable) ports\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:63
-#, c-format
-msgid " -l,--list list current connections of each port\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:64
-#, c-format
-msgid " * Remove all exported connections\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:65
-#, c-format
-msgid " -x, --removeall\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:132
-msgid "Connecting To"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:133
-msgid "Connected From"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:169
-#, c-format
-msgid "client %d: '%s' [type=%s]\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:173
-msgid "user"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:173
-msgid "kernel"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:307
-#, c-format
-msgid "can't open sequencer\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:335
-#, c-format
-msgid "can't get client id\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:342
-#, c-format
-msgid "can't set client info\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:349
-#, c-format
-msgid "invalid sender address %s\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
-#, c-format
-msgid "invalid destination address %s\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:368
-#, c-format
-msgid "No subscription is found\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:373
-#, c-format
-msgid "Disconnection failed (%s)\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:379
-#, c-format
-msgid "Connection is already subscribed\n"
-msgstr ""
-
-#: seq/aconnect/aconnect.c:384
-#, c-format
-msgid "Connection failed (%s)\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:164
-#, c-format
-msgid "aseqnet - network client/server on ALSA sequencer\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:165
-#, c-format
-msgid " Copyright (C) 1999 Takashi Iwai\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:166
-#, c-format
-msgid "usage:\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:167
-#, c-format
-msgid " server mode: aseqnet [-options]\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:168
-#, c-format
-msgid " client mode: aseqnet [-options] server_host\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:169
-#, c-format
-msgid "options:\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:170
-#, c-format
-msgid " -p,--port # : specify TCP port (digit or service name)\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:171
-#, c-format
-msgid " -s,--source addr : read from given addr (client:port)\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:172
-#, c-format
-msgid " -d,--dest addr : write to given addr (client:port)\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:173
-#, c-format
-msgid " -v, --verbose : print verbose messages\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:174
-#, c-format
-msgid " -i, --info : print certain received events\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:188
-#, c-format
-msgid "can't malloc\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:213
-#, c-format
-msgid "closing files..\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:272
-#, c-format
-msgid "sequencer opened: %d:%d\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:279
-#, c-format
-msgid "invalid source address %s\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:309
-#, c-format
-msgid "service '%s' is not found in /etc/services\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:377
-#, c-format
-msgid "too many connections!\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:388
-#, c-format
-msgid "accepted[%d]\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:411
-#, c-format
-msgid "can't get address %s\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:422
-#, c-format
-msgid "ok.. connected\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:518
-#, c-format
-msgid "Channel %2d: Control event : %5d\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:522
-#, c-format
-msgid "Channel %2d: Pitchbender : %5d\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:526
-#, c-format
-msgid "Channel %2d: Note On event : %5d\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:530
-#, c-format
-msgid "Channel %2d: Note Off event: %5d\n"
-msgstr ""
-
-#: seq/aseqnet/aseqnet.c:585
-#, c-format
-msgid "disconnected\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:116
-msgid "Front Left"
-msgstr ""
-
-#: speaker-test/speaker-test.c:117
-msgid "Front Right"
-msgstr ""
-
-#: speaker-test/speaker-test.c:118
-msgid "Rear Left"
-msgstr ""
-
-#: speaker-test/speaker-test.c:119
-msgid "Rear Right"
-msgstr ""
-
-#: speaker-test/speaker-test.c:121
-msgid "LFE"
-msgstr ""
-
-#: speaker-test/speaker-test.c:122
-msgid "Side Left"
-msgstr ""
-
-#: speaker-test/speaker-test.c:123
-msgid "Side Right"
-msgstr ""
-
-#: speaker-test/speaker-test.c:124
-msgid "Channel 9"
-msgstr ""
-
-#: speaker-test/speaker-test.c:125
-msgid "Channel 10"
-msgstr ""
-
-#: speaker-test/speaker-test.c:126
-msgid "Channel 11"
-msgstr ""
-
-#: speaker-test/speaker-test.c:127
-msgid "Channel 12"
-msgstr ""
-
-#: speaker-test/speaker-test.c:128
-msgid "Channel 13"
-msgstr ""
-
-#: speaker-test/speaker-test.c:129
-msgid "Channel 14"
-msgstr ""
-
-#: speaker-test/speaker-test.c:130
-msgid "Channel 15"
-msgstr ""
-
-#: speaker-test/speaker-test.c:131
-msgid "Channel 16"
-msgstr ""
-
-#: speaker-test/speaker-test.c:454
-#, c-format
-msgid "Broken configuration for playback: no configurations available: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:461
-#, c-format
-msgid "Access type not available for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:468
-#, c-format
-msgid "Sample format not available for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:475
-#, c-format
-msgid "Channels count (%i) not available for playbacks: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:483
-#, c-format
-msgid "Rate %iHz not available for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:488
-#, c-format
-msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:492
-#, c-format
-msgid "Rate set to %iHz (requested %iHz)\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:498
-#, c-format
-msgid "Buffer size range from %lu to %lu\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:499
-#, c-format
-msgid "Period size range from %lu to %lu\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:501
-#, c-format
-msgid "Requested period time %u us\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:504
-#, c-format
-msgid "Unable to set period time %u us for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:510
-#, c-format
-msgid "Requested buffer time %u us\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:513
-#, c-format
-msgid "Unable to set buffer time %u us for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:522
-#, c-format
-msgid "Using max buffer size %lu\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:525
-#, c-format
-msgid "Unable to set buffer size %lu for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:531
-#, c-format
-msgid "Periods = %u\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:534
-#, c-format
-msgid "Unable to set nperiods %u for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:543
-#, c-format
-msgid "Unable to set hw params for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:549
-#, c-format
-msgid "was set period_size = %lu\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:550
-#, c-format
-msgid "was set buffer_size = %lu\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:552
-#, c-format
-msgid "buffer to small, could not use\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:565
-#, c-format
-msgid "Unable to determine current swparams for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:572
-#, c-format
-msgid "Unable to set start threshold mode for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:579
-#, c-format
-msgid "Unable to set avail min for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:586
-#, c-format
-msgid "Unable to set sw params for playback: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:606
-#, c-format
-msgid "Unable to set channel map: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:626
-#, c-format
-msgid "Can't recovery from underrun, prepare failed: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:637
-#, c-format
-msgid "Can't recovery from suspend, prepare failed: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
-#, c-format
-msgid "No enough memory\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:706
-#, c-format
-msgid "Cannot open WAV file %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
-#, c-format
-msgid "Invalid WAV file %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:715
-#, c-format
-msgid "Not a WAV file: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:719
-#, c-format
-msgid "Unsupported WAV format %d for %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:724
-#, c-format
-msgid "%s is not a mono stream (%d channels)\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:729
-#, c-format
-msgid "Sample rate doesn't match (%d) for %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:734
-#, c-format
-msgid "Unsupported sample format bits %d for %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:795
-#, c-format
-msgid "Undefined channel %d\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:846
-#, c-format
-msgid "Write error: %d,%s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:848
-#, c-format
-msgid "xrun_recovery failed: %d,%s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:934
-#, c-format
-msgid ""
-"Usage: speaker-test [OPTION]... \n"
-"-h,--help\thelp\n"
-"-D,--device\tplayback device\n"
-"-r,--rate\tstream rate in Hz\n"
-"-c,--channels\tcount of channels in stream\n"
-"-f,--frequency\tsine wave frequency in Hz\n"
-"-F,--format\tsample format\n"
-"-b,--buffer\tring buffer size in us\n"
-"-p,--period\tperiod size in us\n"
-"-P,--nperiods\tnumber of periods\n"
-"-t,--test\tpink=use pink noise, sine=use sine wave, wav=WAV file\n"
-"-l,--nloops\tspecify number of loops to test, 0 = infinite\n"
-"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
-"-w,--wavfile\tUse the given WAV file as a test sound\n"
-"-W,--wavdir\tSpecify the directory containing WAV files\n"
-"-m,--chmap\tSpecify the channel map to override\n"
-"\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1063
-#, c-format
-msgid "Invalid number of periods %d\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
-#, c-format
-msgid "Invalid test type %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1095
-#, c-format
-msgid "Invalid parameter for -s option.\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1114
-#, c-format
-msgid "Unknown option '%c'\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1128
-#, c-format
-msgid "Playback device is %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1129
-#, c-format
-msgid "Stream parameters are %iHz, %s, %i channels\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1132
-#, c-format
-msgid "Using 16 octaves of pink noise\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1135
-#, c-format
-msgid "Sine wave rate is %.4fHz\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1138
-#, c-format
-msgid "WAV file(s)\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1148
-#, c-format
-msgid "Playback open error: %d,%s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1154
-#, c-format
-msgid "Setting of hwparams failed: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1158
-#, c-format
-msgid "Setting of swparams failed: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
-#, c-format
-msgid "Transfer failed: %s\n"
-msgstr ""
-
-#: speaker-test/speaker-test.c:1213
-#, c-format
-msgid "Time per period = %lf\n"
-msgstr ""
diff --git a/po/boldquot.sed b/po/boldquot.sed
deleted file mode 100644
index 4b937aa..0000000
--- a/po/boldquot.sed
+++ /dev/null
@@ -1,10 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
-s/“/“[1m/g
-s/”/[0m”/g
-s/‘/‘[1m/g
-s/’/[0m’/g
diff --git a/po/de.gmo b/po/de.gmo
deleted file mode 100644
index a1a683c..0000000
--- a/po/de.gmo
+++ /dev/null
Binary files differ
diff --git a/po/de.po b/po/de.po
index 54ea68e..0c47c65 100644
--- a/po/de.po
+++ b/po/de.po
@@ -7,11 +7,10 @@
msgstr ""
"Project-Id-Version: alsa-utils 1.0.23\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"POT-Creation-Date: 2010-11-08 21:32+0100\n"
"PO-Revision-Date: 2010-11-09 21:12+0100\n"
"Last-Translator: Clemens Ladisch <clemens@ladisch.de>\n"
"Language-Team: German\n"
-"Language: de\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -89,266 +88,266 @@
msgid "%s: %s\n"
msgstr "%s: %s\n"
-#: alsamixer/mixer_display.c:98
+#: alsamixer/mixer_display.c:95
msgid "Card:"
msgstr "Gerät:"
-#: alsamixer/mixer_display.c:99
+#: alsamixer/mixer_display.c:96
msgid "Chip:"
msgstr "Chip:"
-#: alsamixer/mixer_display.c:100
+#: alsamixer/mixer_display.c:97
msgid "View:"
msgstr "Ansicht:"
-#: alsamixer/mixer_display.c:101
+#: alsamixer/mixer_display.c:98
msgid "Item:"
msgstr "Element:"
-#: alsamixer/mixer_display.c:104
+#: alsamixer/mixer_display.c:101
msgid "F1: Help"
msgstr "F1: Hilfe"
-#: alsamixer/mixer_display.c:105
+#: alsamixer/mixer_display.c:102
msgid "F2: System information"
msgstr "F2: System-Informationen"
-#: alsamixer/mixer_display.c:106
+#: alsamixer/mixer_display.c:103
msgid "F6: Select sound card"
msgstr "F6: Soundkarte auswählen"
-#: alsamixer/mixer_display.c:107
+#: alsamixer/mixer_display.c:104
msgid "Esc: Exit"
msgstr "Esc: Beenden"
-#: alsamixer/mixer_display.c:174
+#: alsamixer/mixer_display.c:171
msgid "(unplugged)"
msgstr "(entfernt)"
-#: alsamixer/mixer_display.c:192
+#: alsamixer/mixer_display.c:189
msgid "Playback"
msgstr "Wiedergabe"
-#: alsamixer/mixer_display.c:193
+#: alsamixer/mixer_display.c:190
msgid "Capture"
msgstr "Aufnahme"
-#: alsamixer/mixer_display.c:194
+#: alsamixer/mixer_display.c:191
msgid "All"
msgstr "Alle"
-#: alsamixer/mixer_display.c:234
+#: alsamixer/mixer_display.c:231
msgid "mute"
msgstr "stumm"
-#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+#: alsamixer/mixer_display.c:272 alsamixer/mixer_display.c:282
msgid "dB gain:"
msgstr "dB-Änderung:"
-#: alsamixer/mixer_display.c:285
+#: alsamixer/mixer_display.c:282
#, c-format
msgid " [%s %s, %s]"
msgstr " [%s %s; %s]"
-#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
-#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+#: alsamixer/mixer_display.c:291 alsamixer/mixer_display.c:297
+#: alsamixer/mixer_display.c:303 alsamixer/mixer_display.c:309
msgid "Off"
msgstr "Aus"
-#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+#: alsamixer/mixer_display.c:297 alsamixer/mixer_display.c:309
msgid "On"
msgstr "An"
-#: alsamixer/mixer_display.c:363
+#: alsamixer/mixer_display.c:360
msgid "The sound device was unplugged."
msgstr "Das Gerät wurde entfernt."
-#: alsamixer/mixer_display.c:364
+#: alsamixer/mixer_display.c:361
msgid "Press F6 to select another sound card."
msgstr "Drücken Sie F6, um eine andere Soundkarte auszuwählen."
-#: alsamixer/mixer_display.c:379
+#: alsamixer/mixer_display.c:376
msgid "This sound device does not have any playback controls."
msgstr "Dieses Gerät hat keine Wiedergabe-Regler."
-#: alsamixer/mixer_display.c:381
+#: alsamixer/mixer_display.c:378
msgid "This sound device does not have any capture controls."
msgstr "Dieses Gerät hat keine Aufnahme-Regler."
-#: alsamixer/mixer_display.c:383
+#: alsamixer/mixer_display.c:380
msgid "This sound device does not have any controls."
msgstr "Dieses Gerät hat keine Regler."
#. TRANSLATORS: playback on; one character
-#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+#: alsamixer/mixer_display.c:537 alsamixer/mixer_display.c:542
msgid "O"
msgstr "O"
#. TRANSLATORS: playback muted; one character
-#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+#: alsamixer/mixer_display.c:539 alsamixer/mixer_display.c:543
msgid "M"
msgstr "M"
#. TRANSLATORS: "left"; no more than two characters
-#: alsamixer/mixer_display.c:536
+#: alsamixer/mixer_display.c:557
msgid "L"
msgstr "L"
#. TRANSLATORS: "right"; no more than two characters
-#: alsamixer/mixer_display.c:540
+#: alsamixer/mixer_display.c:561
msgid "R"
msgstr "R"
#. TRANSLATORS: no more than eight characters
-#: alsamixer/mixer_display.c:542
+#: alsamixer/mixer_display.c:563
msgid "CAPTURE"
msgstr "AUFNAHME"
-#: alsamixer/mixer_display.c:592
+#: alsamixer/mixer_display.c:613
msgid "Front"
msgstr "Vorne"
-#: alsamixer/mixer_display.c:595
+#: alsamixer/mixer_display.c:616
msgid "Rear"
msgstr "Hinten"
-#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+#: alsamixer/mixer_display.c:619 speaker-test/speaker-test.c:108
msgid "Center"
msgstr "Mitte"
-#: alsamixer/mixer_display.c:601
+#: alsamixer/mixer_display.c:622
msgid "Woofer"
msgstr "Bass"
-#: alsamixer/mixer_display.c:604
+#: alsamixer/mixer_display.c:625
msgid "Side"
msgstr "Seiten"
-#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+#: alsamixer/mixer_widget.c:83 alsamixer/mixer_widget.c:88
msgid "cannot open mixer"
msgstr "Fehler beim Öffen des Mixer-Gerätes"
-#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+#: alsamixer/mixer_widget.c:94 alsamixer/mixer_widget.c:171
msgid "cannot load mixer controls"
msgstr "Fehler beim Laden der Mixer-Regler"
-#: alsamixer/mixer_widget.c:169
+#: alsamixer/mixer_widget.c:161
#, c-format
msgid "Cannot open mixer device '%s'."
msgstr "Fehler beim Öffnen des Mixer-Gerätes '%s'."
-#: alsamixer/mixer_widget.c:190
+#: alsamixer/mixer_widget.c:182
msgid "Esc Exit"
msgstr "Esc Beenden"
-#: alsamixer/mixer_widget.c:191
+#: alsamixer/mixer_widget.c:183
msgid "F1 ? H Help"
msgstr "F1 ? H Hilfe"
-#: alsamixer/mixer_widget.c:192
+#: alsamixer/mixer_widget.c:184
msgid "F2 / System information"
msgstr "F2 / System-Informationen"
-#: alsamixer/mixer_widget.c:193
+#: alsamixer/mixer_widget.c:185
msgid "F3 Show playback controls"
msgstr "F3 Ansicht Wiedergabe-Regler"
-#: alsamixer/mixer_widget.c:194
+#: alsamixer/mixer_widget.c:186
msgid "F4 Show capture controls"
msgstr "F4 Ansicht Aufnahme-Regler"
-#: alsamixer/mixer_widget.c:195
+#: alsamixer/mixer_widget.c:187
msgid "F5 Show all controls"
msgstr "F5 Ansicht alle Regler"
-#: alsamixer/mixer_widget.c:196
+#: alsamixer/mixer_widget.c:188
msgid "Tab Toggle view mode (F3/F4/F5)"
msgstr "Tab Ansichts-Modus umschalten (F3/F4/F5)"
-#: alsamixer/mixer_widget.c:197
+#: alsamixer/mixer_widget.c:189
msgid "F6 S Select sound card"
msgstr "F6 S Soundkarte auswählen"
-#: alsamixer/mixer_widget.c:198
+#: alsamixer/mixer_widget.c:190
msgid "L Redraw screen"
msgstr "L Bildschirm neu darstellen"
-#: alsamixer/mixer_widget.c:200
+#: alsamixer/mixer_widget.c:192
msgid "Left Move to the previous control"
msgstr "Links gehe zum vorherigen Regler"
-#: alsamixer/mixer_widget.c:201
+#: alsamixer/mixer_widget.c:193
msgid "Right Move to the next control"
msgstr "Rechts gehe zum nächsten Regler"
-#: alsamixer/mixer_widget.c:203
+#: alsamixer/mixer_widget.c:195
msgid "Up/Down Change volume"
msgstr "Oben/Unten Lautstärke ändern"
-#: alsamixer/mixer_widget.c:204
+#: alsamixer/mixer_widget.c:196
msgid "+ - Change volume"
msgstr "+ - Lautstärke ändern"
-#: alsamixer/mixer_widget.c:205
+#: alsamixer/mixer_widget.c:197
msgid "Page Up/Dn Change volume in big steps"
msgstr "Bild ^/v Lautstärke in großen Schritten ändern"
-#: alsamixer/mixer_widget.c:206
+#: alsamixer/mixer_widget.c:198
msgid "End Set volume to 0%"
msgstr "Ende Lautstärke auf 0% setzen"
-#: alsamixer/mixer_widget.c:207
+#: alsamixer/mixer_widget.c:199
msgid "0-9 Set volume to 0%-90%"
msgstr "0-9 Lautstärke auf 0%-90% setzen"
-#: alsamixer/mixer_widget.c:208
+#: alsamixer/mixer_widget.c:200
msgid "Q W E Increase left/both/right volumes"
msgstr "Q W E linke/beide/rechte Lautstärke erhöhen"
#. TRANSLATORS: or Y instead of Z
-#: alsamixer/mixer_widget.c:210
+#: alsamixer/mixer_widget.c:202
msgid "Z X C Decrease left/both/right volumes"
msgstr "Y X C linke/beide/rechte Lautstärke verringern"
-#: alsamixer/mixer_widget.c:211
+#: alsamixer/mixer_widget.c:203
msgid "B Balance left and right volumes"
msgstr "B linke und rechte Lautstärke angleichen"
-#: alsamixer/mixer_widget.c:213
+#: alsamixer/mixer_widget.c:205
msgid "M Toggle mute"
msgstr "M stumm umschalten"
#. TRANSLATORS: or , .
-#: alsamixer/mixer_widget.c:215
+#: alsamixer/mixer_widget.c:207
msgid "< > Toggle left/right mute"
msgstr ", . stumm links/rechts umschalten"
-#: alsamixer/mixer_widget.c:217
+#: alsamixer/mixer_widget.c:209
msgid "Space Toggle capture"
msgstr "Leertaste Aufnahme umschalten"
#. TRANSLATORS: or Insert Delete
-#: alsamixer/mixer_widget.c:219
+#: alsamixer/mixer_widget.c:211
msgid "; ' Toggle left/right capture"
msgstr "Einfg Entf Aufnahme links/rechts umschalten"
-#: alsamixer/mixer_widget.c:221
+#: alsamixer/mixer_widget.c:213
msgid "Authors:"
msgstr "Autoren:"
-#: alsamixer/mixer_widget.c:222
+#: alsamixer/mixer_widget.c:214
msgid " Tim Janik"
msgstr " Tim Janik"
-#: alsamixer/mixer_widget.c:223
+#: alsamixer/mixer_widget.c:215
msgid " Jaroslav Kysela <perex@perex.cz>"
msgstr " Jaroslav Kysela <perex@perex.cz>"
-#: alsamixer/mixer_widget.c:224
+#: alsamixer/mixer_widget.c:216
msgid " Clemens Ladisch <clemens@ladisch.de>"
msgstr " Clemens Ladisch <clemens@ladisch.de>"
-#: alsamixer/mixer_widget.c:226
+#: alsamixer/mixer_widget.c:218
msgid "Help"
msgstr "Hilfe"
@@ -365,24 +364,24 @@
msgid "Cannot open file \"%s\"."
msgstr "Fehler beim Öffnen der Datei \"%s\"."
-#: aplay/aplay.c:175
+#: aplay/aplay.c:152
msgid "raw data"
msgstr "Rohdaten"
-#: aplay/aplay.c:176
+#: aplay/aplay.c:153
msgid "VOC"
msgstr "VOC"
-#: aplay/aplay.c:178
+#: aplay/aplay.c:155
msgid "WAVE"
msgstr "WAVE"
-#: aplay/aplay.c:179
+#: aplay/aplay.c:156
msgid "Sparc Audio"
msgstr "Sparc-Audio"
-#: aplay/aplay.c:200
-#, fuzzy, c-format
+#: aplay/aplay.c:177
+#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"\n"
@@ -411,15 +410,12 @@
"-v, --verbose show PCM structure and setup (accumulative)\n"
"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
"-I, --separate-channels one file for each channel\n"
-"-i, --interactive allow interactive operation from stdin\n"
-"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
" --disable-resample disable automatic rate resample\n"
" --disable-channels disable automatic channel conversions\n"
" --disable-format disable automatic format conversions\n"
" --disable-softvol disable software volume control (softvol)\n"
" --test-position test ring buffer position\n"
-" --test-coef=# test coefficient for ring buffer position (default "
-"8)\n"
+" --test-coef=#\t test coeficient for ring buffer position (default 8)\n"
" expression for validation is: coef * (buffer_size / "
"2)\n"
" --test-nowait do not wait for ring buffer - eats whole CPU\n"
@@ -428,8 +424,6 @@
" for this many seconds\n"
" --process-id-file write the process ID here\n"
" --use-strftime apply the strftime facility to the output file name\n"
-" --dump-hw-params dump hw_params of the device\n"
-" --fatal-errors treat all errors as fatal\n"
msgstr ""
"Verwendung: %s [Option]... [Datei]...\n"
"\n"
@@ -471,12 +465,12 @@
" --process-id-file=# schreibe Prozess-ID in diese Datei\n"
" --use-strftime formatiere Dateiname mit strftime; %%v=Dateinummer\n"
-#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#: aplay/aplay.c:216 speaker-test/speaker-test.c:819
#, c-format
msgid "Recognized sample formats are:"
msgstr "Unterstützte Sample-Formate:"
-#: aplay/aplay.c:250
+#: aplay/aplay.c:222
#, c-format
msgid ""
"\n"
@@ -485,126 +479,120 @@
"\n"
"Nicht alle davon sind auf jeder Hardware verfügbar.\n"
-#: aplay/aplay.c:251
-#, fuzzy, c-format
-msgid "The available format shortcuts are:\n"
+#: aplay/aplay.c:223
+#, c-format
+msgid "The availabled format shortcuts are:\n"
msgstr "Unterstütze Format-Abkürzungen:\n"
-#: aplay/aplay.c:252
+#: aplay/aplay.c:224
#, c-format
msgid "-f cd (16 bit little endian, 44100, stereo)\n"
msgstr "-f cd (16 Bits, Little Endian, 44100 Hz, stereo)\n"
-#: aplay/aplay.c:253
+#: aplay/aplay.c:225
#, c-format
msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
msgstr "-f cdr (16 Bits, Big Endian, 44100 Hz, stereo)\n"
-#: aplay/aplay.c:254
+#: aplay/aplay.c:226
#, c-format
msgid "-f dat (16 bit little endian, 48000, stereo)\n"
msgstr "-f dat (16 Bits, Little Endian, 48000 Hz, stereo)\n"
-#: aplay/aplay.c:268
+#: aplay/aplay.c:240
msgid "no soundcards found..."
msgstr "keine Soundkarten gefunden ..."
-#: aplay/aplay.c:271
+#: aplay/aplay.c:243
#, c-format
msgid "**** List of %s Hardware Devices ****\n"
msgstr "**** Liste der Hardware-Geräte (%s) ****\n"
-#: aplay/aplay.c:300
+#: aplay/aplay.c:272
#, c-format
msgid "card %i: %s [%s], device %i: %s [%s]\n"
msgstr "Karte %i: %s [%s], Gerät %i: %s [%s]\n"
-#: aplay/aplay.c:306
+#: aplay/aplay.c:278
#, c-format
msgid " Subdevices: %i/%i\n"
msgstr " Sub-Geräte: %i/%i\n"
-#: aplay/aplay.c:313
+#: aplay/aplay.c:285
#, c-format
msgid " Subdevice #%i: %s\n"
msgstr " Sub-Gerät #%i: %s\n"
-#: aplay/aplay.c:394
+#: aplay/aplay.c:362
#, c-format
msgid "Aborted by signal %s...\n"
msgstr "Abbruch durch Signal %s ...\n"
-#: aplay/aplay.c:512
+#: aplay/aplay.c:473
msgid "command should be named either arecord or aplay"
msgstr "Befehl sollte arecord oder aplay sein"
-#: aplay/aplay.c:556
+#: aplay/aplay.c:512
#, c-format
msgid "unrecognized file format %s"
msgstr "unbekanntes Dateiformat %s"
-#: aplay/aplay.c:563
+#: aplay/aplay.c:519
#, c-format
msgid "value %i for channels is invalid"
msgstr "Kanalanzahl %i ist ungültig"
-#: aplay/aplay.c:582
+#: aplay/aplay.c:538
#, c-format
msgid "wrong extended format '%s'"
msgstr "erweitertes Format '%s' ist ungültig"
-#: aplay/aplay.c:593
+#: aplay/aplay.c:549
#, c-format
msgid "bad speed value %i"
msgstr "ungültige Rate %i"
-#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
-#, fuzzy, c-format
-msgid "Unable to parse channel map string: %s\n"
-msgstr "Fehler beim Setzen des Mindest-verfügbar-Wertes: %s\n"
-
-#: aplay/aplay.c:706
+#: aplay/aplay.c:644
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Siehe `%s --help' für mehr Informationen.\n"
-#: aplay/aplay.c:722
+#: aplay/aplay.c:660
#, c-format
msgid "audio open error: %s"
msgstr "Fehler beim Öffnen des Gerätes: %s"
-#: aplay/aplay.c:727
+#: aplay/aplay.c:665
#, c-format
msgid "info error: %s"
msgstr "Fehler beim Lesen der Geräteinformationen: %s"
-#: aplay/aplay.c:734
+#: aplay/aplay.c:672
#, c-format
msgid "nonblock setting error: %s"
msgstr "Fehler beim Setzen des nonblock-Modus: %s"
-#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
-#: aplay/aplay.c:1867 aplay/aplay.c:1897
+#: aplay/aplay.c:682 aplay/aplay.c:806 aplay/aplay.c:1174
msgid "not enough memory"
msgstr "nicht genug Speicher"
-#: aplay/aplay.c:768
+#: aplay/aplay.c:706
#, c-format
msgid "Cannot create process ID file %s: %s"
msgstr "Fehler beim Schreiben der Prozess-ID-Datei %s: %s"
-#: aplay/aplay.c:858
+#: aplay/aplay.c:796
#, c-format
msgid "read error (called from line %i)"
msgstr "Lesefehler (aufgerufen von Zeile %i)"
-#: aplay/aplay.c:925
+#: aplay/aplay.c:854
#, c-format
msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
msgstr ""
"unbekannte Länge des 'fmt '-Blocks (gelesen: %u, sollte mindestens %u sein)"
-#: aplay/aplay.c:936
+#: aplay/aplay.c:864
#, c-format
msgid ""
"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
@@ -612,354 +600,340 @@
"unbekannte Länge des erweiterten 'fmt '-Blocks (gelesen: %u, sollte "
"mindestens %u sein)"
-#: aplay/aplay.c:941
+#: aplay/aplay.c:869
msgid "wrong format tag in extensible 'fmt ' chunk"
msgstr "ungültiger Format-Wert im erweiterten 'fmt '-Block"
-#: aplay/aplay.c:948
+#: aplay/aplay.c:876
#, c-format
msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
msgstr ""
"kann WAVE-Datei-Format 0x%04x nicht abspielen; ist weder PCM noch FLOAT"
-#: aplay/aplay.c:953
+#: aplay/aplay.c:880
#, c-format
msgid "can't play WAVE-files with %d tracks"
msgstr "kann WAVE-Datei mit %d Kanälen nicht abspielen"
-#: aplay/aplay.c:961 aplay/aplay.c:1087
+#: aplay/aplay.c:888 aplay/aplay.c:988
#, c-format
msgid "Warning: format is changed to U8\n"
msgstr "Warnung: benutztes Format ist U8\n"
-#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
-#, fuzzy, c-format
-msgid "Warning: format is changed to %s\n"
-msgstr "Warnung: benutztes Format ist U8\n"
+#: aplay/aplay.c:894
+#, c-format
+msgid "Warning: format is changed to S16_LE\n"
+msgstr "Warnung: benutztes Format ist S16_LE\n"
-#: aplay/aplay.c:1000
+#: aplay/aplay.c:902
+#, c-format
+msgid "Warning: format is changed to S24_3LE\n"
+msgstr "Warnung: benutztes Format ist S24_3LE\n"
+
+#: aplay/aplay.c:908
+#, c-format
+msgid "Warning: format is changed to S24_LE\n"
+msgstr "Warnung: benutztes Format ist S24_LE\n"
+
+#: aplay/aplay.c:912
#, c-format
msgid ""
" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
msgstr ""
"kann WAVE-Datei mit %d-Bit-Samples in %d Bytes (%d Kanäle) nicht abspielen"
-#: aplay/aplay.c:1023
+#: aplay/aplay.c:924
#, c-format
msgid " can't play WAVE-files with sample %d bits wide"
msgstr "kann WAVE-Datei mit %d-Bit-Samples nicht abspielen"
-#: aplay/aplay.c:1081
+#: aplay/aplay.c:982
#, c-format
msgid "Warning: format is changed to MU_LAW\n"
msgstr "Warnung: benutztes Format ist MU_LAW\n"
-#: aplay/aplay.c:1093
+#: aplay/aplay.c:994
#, c-format
msgid "Warning: format is changed to S16_BE\n"
msgstr "Warnung: benutztes Format ist S16_BE\n"
-#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
-#: aplay/aplay.c:2727
+#: aplay/aplay.c:1007 aplay/aplay.c:1925 aplay/aplay.c:1932 aplay/aplay.c:2455
+#: aplay/aplay.c:2467
msgid "read error"
msgstr "Lesefehler"
-#: aplay/aplay.c:1136
-msgid "Channel numbers don't match between hw_params and channel map"
-msgstr ""
-
-#: aplay/aplay.c:1145
-#, c-format
-msgid "Warning: unable to get channel map\n"
-msgstr ""
-
-#: aplay/aplay.c:1178
-#, c-format
-msgid "Channel %d doesn't match with hw_parmas"
-msgstr ""
-
-#: aplay/aplay.c:1204
+#: aplay/aplay.c:1037
msgid "Broken configuration for this PCM: no configurations available"
msgstr ""
"ungültige Konfiguration für dieses Gerät: keine unterstützte Konfiguration"
-#: aplay/aplay.c:1208
-#, c-format
-msgid "HW Params of device \"%s\":\n"
-msgstr ""
-
-#: aplay/aplay.c:1228
+#: aplay/aplay.c:1054
msgid "Access type not available"
msgstr "Zugriffs-Modus nicht unterstützt"
-#: aplay/aplay.c:1233
+#: aplay/aplay.c:1059
msgid "Sample format non available"
msgstr "Sample-Format nicht unterstützt"
-#: aplay/aplay.c:1239
+#: aplay/aplay.c:1065
msgid "Channels count non available"
msgstr "Kanalanzahl nicht unterstützt"
-#: aplay/aplay.c:1254
+#: aplay/aplay.c:1080
#, c-format
msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
msgstr ""
"Warnung: Rate ist nicht exakt (angefordert: %i Hz, unterstützt: %i Hz)\n"
-#: aplay/aplay.c:1260
+#: aplay/aplay.c:1086
#, c-format
msgid " please, try the plug plugin %s\n"
msgstr " probieren Sie bitte das plug-Plugin: %s\n"
-#: aplay/aplay.c:1297
+#: aplay/aplay.c:1123
msgid "Unable to install hw params:"
msgstr "Fehler beim Setzen der Hardware-Parameter:"
-#: aplay/aplay.c:1304
+#: aplay/aplay.c:1130
#, c-format
msgid "Can't use period equal to buffer size (%lu == %lu)"
msgstr "Periode gleich der Puffer-Größe wird nicht unterstützt (%lu == %lu)"
-#: aplay/aplay.c:1335
+#: aplay/aplay.c:1161
msgid "unable to install sw params:"
msgstr "Fehler beim Setzen der Software-Parameter:"
-#: aplay/aplay.c:1369
+#: aplay/aplay.c:1192
#, c-format
msgid "snd_pcm_mmap_begin problem: %s"
msgstr "Fehler bei snd_pcm_mmap_begin: %s"
-#: aplay/aplay.c:1398
+#: aplay/aplay.c:1215
#, c-format
msgid "stdin O_NONBLOCK flag setup failed\n"
msgstr "Fehler beim Setzen von O_NONBLOCK in stdin\n"
-#: aplay/aplay.c:1422
+#: aplay/aplay.c:1237
#, c-format
msgid "\rPAUSE command ignored (no hw support)\n"
msgstr "\rPause-Kommando ignoriert (keine HW-Unterstützung)\n"
-#: aplay/aplay.c:1427
+#: aplay/aplay.c:1242
#, c-format
msgid "pause push error: %s"
msgstr "Fehler beim Pausieren: %s"
-#: aplay/aplay.c:1436
+#: aplay/aplay.c:1251
#, c-format
msgid "pause release error: %s"
msgstr "Fehler beim Beenden der Pause: %s"
-#: aplay/aplay.c:1452
+#: aplay/aplay.c:1265
#, c-format
msgid ""
"\r=== PAUSE === "
msgstr ""
"\r=== PAUSE === "
-#: aplay/aplay.c:1494
+#: aplay/aplay.c:1307
#, c-format
msgid "status error: %s"
msgstr "Status-Fehler: %s"
-#: aplay/aplay.c:1499
-#, fuzzy, c-format
-msgid "fatal %s: %s"
-msgstr "%s: %s\n"
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
-msgid "underrun"
-msgstr "Unterlauf"
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
-msgid "overrun"
-msgstr "Überlauf"
-
-#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#: aplay/aplay.c:1317 aplay/aplay.c:1328
#, c-format
msgid "%s!!! (at least %.3f ms long)\n"
msgstr "%s!!! (mindestens %.3f ms)\n"
-#: aplay/aplay.c:1526
+#: aplay/aplay.c:1318 aplay/aplay.c:1321 aplay/aplay.c:1329
+msgid "underrun"
+msgstr "Unterlauf"
+
+#: aplay/aplay.c:1318 aplay/aplay.c:1329
+msgid "overrun"
+msgstr "Überlauf"
+
+#: aplay/aplay.c:1333
#, c-format
msgid "Status:\n"
msgstr "Status:\n"
-#: aplay/aplay.c:1530
+#: aplay/aplay.c:1337
#, c-format
msgid "xrun: prepare error: %s"
msgstr "Unter-/Überlauf: Fehler beim Re-Initialisieren des Gerätes: %s"
-#: aplay/aplay.c:1536
+#: aplay/aplay.c:1343
#, c-format
msgid "Status(DRAINING):\n"
msgstr "Status (DRAINING):\n"
-#: aplay/aplay.c:1540
+#: aplay/aplay.c:1347
#, c-format
msgid "capture stream format change? attempting recover...\n"
msgstr "Format-Wechsel der Aufnahme-Daten? Versuche Wiederherstellung ...\n"
-#: aplay/aplay.c:1542
+#: aplay/aplay.c:1349
#, c-format
msgid "xrun(DRAINING): prepare error: %s"
msgstr "XRUN (DRAINING): Fehler beim Re-Initialisieren des Gerätes: %s"
-#: aplay/aplay.c:1549
+#: aplay/aplay.c:1356
#, c-format
msgid "Status(R/W):\n"
msgstr "Status (R/W):\n"
-#: aplay/aplay.c:1552
+#: aplay/aplay.c:1359
#, c-format
msgid "read/write error, state = %s"
msgstr "Lese-/Schreibfehler, Status = %s"
-#: aplay/aplay.c:1562
+#: aplay/aplay.c:1369
#, c-format
msgid "Suspended. Trying resume. "
msgstr "Ruhezustand. Versuche, aufzuwecken. "
-#: aplay/aplay.c:1567
+#: aplay/aplay.c:1374
#, c-format
msgid "Failed. Restarting stream. "
msgstr "Fehlgeschlagen. Re-Initialisierung. "
-#: aplay/aplay.c:1569
+#: aplay/aplay.c:1376
#, c-format
msgid "suspend: prepare error: %s"
msgstr "Ruhezustand: Fehler beim Re-Initialisieren: %s"
-#: aplay/aplay.c:1574
+#: aplay/aplay.c:1381
#, c-format
msgid "Done.\n"
msgstr "Fertig.\n"
-#: aplay/aplay.c:1596
+#: aplay/aplay.c:1403
#, c-format
msgid " !clip "
msgstr " !clip "
-#: aplay/aplay.c:1743
+#: aplay/aplay.c:1550
#, c-format
msgid "Unsupported bit size %d.\n"
msgstr "%d-Bit-Samples werden nicht unterstützt.\n"
-#: aplay/aplay.c:1777
+#: aplay/aplay.c:1584
#, c-format
msgid "Max peak (%li samples): 0x%08x "
msgstr "Höchstwert (%li Samples): 0x%08x "
-#: aplay/aplay.c:1811
+#: aplay/aplay.c:1618
#, c-format
msgid ""
-"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
-"%li\n"
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = %"
+"li\n"
msgstr ""
-"verdächtige Puffer-Position (total %li): avail = %li, delay = %li, buffer = "
-"%li\n"
+"verdächtige Puffer-Position (total %li): avail = %li, delay = %li, buffer = %"
+"li\n"
-#: aplay/aplay.c:1939
+#: aplay/aplay.c:1682
#, c-format
msgid "write error: %s"
msgstr "Schreibfehler: %s"
-#: aplay/aplay.c:1987
+#: aplay/aplay.c:1729
#, c-format
msgid "writev error: %s"
msgstr "Vektor-Schreib-Fehler: %s"
-#: aplay/aplay.c:2031
+#: aplay/aplay.c:1773
#, c-format
msgid "read error: %s"
msgstr "Lesefehler: %s"
-#: aplay/aplay.c:2075
+#: aplay/aplay.c:1817
#, c-format
msgid "readv error: %s"
msgstr "Vektor-Lese-Fehler: %s"
-#: aplay/aplay.c:2123
+#: aplay/aplay.c:1865
msgid "can't allocate buffer for silence"
msgstr "nicht genug Speicher für Stille-Block"
-#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
-#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
-#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+#: aplay/aplay.c:1874 aplay/aplay.c:2100 aplay/aplay.c:2105 aplay/aplay.c:2152
+#: aplay/aplay.c:2161 aplay/aplay.c:2168 aplay/aplay.c:2178 aplay/aplay.c:2184
+#: aplay/aplay.c:2256 aplay/aplay.c:2286 aplay/aplay.c:2300
msgid "write error"
msgstr "Schreibfehler"
-#: aplay/aplay.c:2145
+#: aplay/aplay.c:1887
#, c-format
msgid "voc_pcm_flush - silence error"
msgstr "voc_pcm_flush - Fehler in set_silence"
-#: aplay/aplay.c:2148
+#: aplay/aplay.c:1890
msgid "voc_pcm_flush error"
msgstr "Schreibfehler"
-#: aplay/aplay.c:2173
+#: aplay/aplay.c:1916
msgid "malloc error"
msgstr "nicht genug Speicher"
-#: aplay/aplay.c:2177
+#: aplay/aplay.c:1920
#, c-format
msgid "Playing Creative Labs Channel file '%s'...\n"
msgstr "Spiele Creative Labs Channel-Datei '%s'...\n"
-#: aplay/aplay.c:2245 aplay/aplay.c:2340
+#: aplay/aplay.c:1988 aplay/aplay.c:2080
msgid "can't play packed .voc files"
msgstr "kann komprimierte .voc-Dateien nicht abspielen"
-#: aplay/aplay.c:2300
+#: aplay/aplay.c:2040
#, c-format
msgid "can't play loops; %s isn't seekable\n"
msgstr ""
"kann Schleife nicht abspielen; Dateiposition in %s ist nicht änderbar\n"
-#: aplay/aplay.c:2349
+#: aplay/aplay.c:2089
#, c-format
msgid "unknown blocktype %d. terminate."
msgstr "Unbekannter Block-Typ %d. Abbruch."
-#: aplay/aplay.c:2480
+#: aplay/aplay.c:2220
#, c-format
msgid "Wave doesn't support %s format..."
msgstr "Format %s wird in WAVE nicht unterstützt ..."
-#: aplay/aplay.c:2540
+#: aplay/aplay.c:2280
#, c-format
msgid "Sparc Audio doesn't support %s format..."
msgstr "Format %s wird in Sparc-Audio nicht unterstützt ..."
-#: aplay/aplay.c:2621
+#: aplay/aplay.c:2361
msgid "Playing"
msgstr "Wiedergabe:"
-#: aplay/aplay.c:2621
+#: aplay/aplay.c:2361
msgid "Recording"
msgstr "Aufnahme:"
-#: aplay/aplay.c:2625
+#: aplay/aplay.c:2365
#, c-format
msgid "Rate %d Hz, "
msgstr "Rate: %d Hz, "
-#: aplay/aplay.c:2627
+#: aplay/aplay.c:2367
#, c-format
msgid "Mono"
msgstr "mono"
-#: aplay/aplay.c:2629
+#: aplay/aplay.c:2369
#, c-format
msgid "Stereo"
msgstr "stereo"
-#: aplay/aplay.c:2631
+#: aplay/aplay.c:2371
#, c-format
msgid "Channels %i"
msgstr "%i Kanäle"
-#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#: aplay/aplay.c:2882 aplay/aplay.c:2935
#, c-format
msgid "You need to specify %d files"
msgstr "Es werden %d Dateien benötigt."
@@ -1146,8 +1120,8 @@
msgstr "Optionen:\n"
#: seq/aseqnet/aseqnet.c:170
-#, fuzzy, c-format
-msgid " -p,--port # : specify TCP port (digit or service name)\n"
+#, c-format
+msgid " -p,--port # : sepcify TCP port (digit or service name)\n"
msgstr " -p,--port # : TCP-Port (Zahl oder Service-Name)\n"
#: seq/aseqnet/aseqnet.c:171
@@ -1240,268 +1214,263 @@
msgid "disconnected\n"
msgstr "Verbindung getrennt\n"
-#: speaker-test/speaker-test.c:116
+#: speaker-test/speaker-test.c:104
msgid "Front Left"
msgstr "Vorne links"
-#: speaker-test/speaker-test.c:117
+#: speaker-test/speaker-test.c:105
msgid "Front Right"
msgstr "Vorne rechts"
-#: speaker-test/speaker-test.c:118
+#: speaker-test/speaker-test.c:106
msgid "Rear Left"
msgstr "Hinten links"
-#: speaker-test/speaker-test.c:119
+#: speaker-test/speaker-test.c:107
msgid "Rear Right"
msgstr "Hinten rechts"
-#: speaker-test/speaker-test.c:121
+#: speaker-test/speaker-test.c:109
msgid "LFE"
msgstr "Bass"
-#: speaker-test/speaker-test.c:122
+#: speaker-test/speaker-test.c:110
msgid "Side Left"
msgstr "Seitlich links"
-#: speaker-test/speaker-test.c:123
+#: speaker-test/speaker-test.c:111
msgid "Side Right"
msgstr "Seitlich rechts"
-#: speaker-test/speaker-test.c:124
+#: speaker-test/speaker-test.c:112
msgid "Channel 9"
msgstr "Kanal 9"
-#: speaker-test/speaker-test.c:125
+#: speaker-test/speaker-test.c:113
msgid "Channel 10"
msgstr "Kanal 10"
-#: speaker-test/speaker-test.c:126
+#: speaker-test/speaker-test.c:114
msgid "Channel 11"
msgstr "Kanal 11"
-#: speaker-test/speaker-test.c:127
+#: speaker-test/speaker-test.c:115
msgid "Channel 12"
msgstr "Kanal 12"
-#: speaker-test/speaker-test.c:128
+#: speaker-test/speaker-test.c:116
msgid "Channel 13"
msgstr "Kanal 13"
-#: speaker-test/speaker-test.c:129
+#: speaker-test/speaker-test.c:117
msgid "Channel 14"
msgstr "Kanal 14"
-#: speaker-test/speaker-test.c:130
+#: speaker-test/speaker-test.c:118
msgid "Channel 15"
msgstr "Kanal 15"
-#: speaker-test/speaker-test.c:131
+#: speaker-test/speaker-test.c:119
msgid "Channel 16"
msgstr "Kanal 16"
-#: speaker-test/speaker-test.c:454
+#: speaker-test/speaker-test.c:383
#, c-format
msgid "Broken configuration for playback: no configurations available: %s\n"
msgstr "Ungültige Konfiguration: keine unterstützte Konfiguration: %s\n"
-#: speaker-test/speaker-test.c:461
+#: speaker-test/speaker-test.c:390
#, c-format
msgid "Access type not available for playback: %s\n"
msgstr "Zugriffsmodus nicht unterstützt: %s\n"
-#: speaker-test/speaker-test.c:468
+#: speaker-test/speaker-test.c:397
#, c-format
msgid "Sample format not available for playback: %s\n"
msgstr "Sample-Format nicht unterstützt: %s\n"
-#: speaker-test/speaker-test.c:475
+#: speaker-test/speaker-test.c:404
#, c-format
msgid "Channels count (%i) not available for playbacks: %s\n"
msgstr "Kanal-Anzahl %i nicht unterstützt: %s\n"
-#: speaker-test/speaker-test.c:483
+#: speaker-test/speaker-test.c:412
#, c-format
msgid "Rate %iHz not available for playback: %s\n"
msgstr "Rate %i Hz nicht unterstützt: %s\n"
-#: speaker-test/speaker-test.c:488
+#: speaker-test/speaker-test.c:417
#, c-format
msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
msgstr ""
-"Rate ist nicht exakt (angefordert: %i Hz, unterstützt: %i Hz, Fehlercode "
-"%d)\n"
+"Rate ist nicht exakt (angefordert: %i Hz, unterstützt: %i Hz, Fehlercode %"
+"d)\n"
-#: speaker-test/speaker-test.c:492
+#: speaker-test/speaker-test.c:421
#, c-format
msgid "Rate set to %iHz (requested %iHz)\n"
msgstr "Rate ist %i Hz (angefordert: %i Hz)\n"
-#: speaker-test/speaker-test.c:498
+#: speaker-test/speaker-test.c:427
#, c-format
msgid "Buffer size range from %lu to %lu\n"
msgstr "Puffergröße von %lu bis %lu\n"
-#: speaker-test/speaker-test.c:499
+#: speaker-test/speaker-test.c:428
#, c-format
msgid "Period size range from %lu to %lu\n"
msgstr "Periodengröße von %lu bis %lu\n"
-#: speaker-test/speaker-test.c:501
+#: speaker-test/speaker-test.c:430
#, c-format
msgid "Requested period time %u us\n"
msgstr "Angeforderte Periodenzeit %u µs\n"
-#: speaker-test/speaker-test.c:504
+#: speaker-test/speaker-test.c:433
#, c-format
msgid "Unable to set period time %u us for playback: %s\n"
msgstr "Fehler beim Setzen der Periodenzeit %u µs: %s\n"
-#: speaker-test/speaker-test.c:510
+#: speaker-test/speaker-test.c:439
#, c-format
msgid "Requested buffer time %u us\n"
msgstr "Angeforderte Pufferlänge %u µs\n"
-#: speaker-test/speaker-test.c:513
+#: speaker-test/speaker-test.c:442
#, c-format
msgid "Unable to set buffer time %u us for playback: %s\n"
msgstr "Fehler beim Setzen der Pufferlänge %u µs: %s\n"
-#: speaker-test/speaker-test.c:522
+#: speaker-test/speaker-test.c:451
#, c-format
msgid "Using max buffer size %lu\n"
msgstr "Verwende maximale Puffergröße %lu\n"
-#: speaker-test/speaker-test.c:525
+#: speaker-test/speaker-test.c:454
#, c-format
msgid "Unable to set buffer size %lu for playback: %s\n"
msgstr "Fehler beim Setzen der Puffergröße %lu: %s\n"
-#: speaker-test/speaker-test.c:531
+#: speaker-test/speaker-test.c:460
#, c-format
msgid "Periods = %u\n"
msgstr "Perioden = %u\n"
-#: speaker-test/speaker-test.c:534
+#: speaker-test/speaker-test.c:463
#, c-format
msgid "Unable to set nperiods %u for playback: %s\n"
msgstr "Fehler beim Setzen der Periodenanzahl %u: %s\n"
-#: speaker-test/speaker-test.c:543
+#: speaker-test/speaker-test.c:472
#, c-format
msgid "Unable to set hw params for playback: %s\n"
msgstr "Fehler beim Setzen der Hardware-Parameter: %s\n"
-#: speaker-test/speaker-test.c:549
+#: speaker-test/speaker-test.c:478
#, c-format
msgid "was set period_size = %lu\n"
msgstr "gesetzt: period_size = %lu\n"
-#: speaker-test/speaker-test.c:550
+#: speaker-test/speaker-test.c:479
#, c-format
msgid "was set buffer_size = %lu\n"
msgstr "gesetzt: buffer_size = %lu\n"
-#: speaker-test/speaker-test.c:552
+#: speaker-test/speaker-test.c:481
#, c-format
msgid "buffer to small, could not use\n"
msgstr "Puffer zu klein, kann nicht benutzt werden\n"
-#: speaker-test/speaker-test.c:565
+#: speaker-test/speaker-test.c:494
#, c-format
msgid "Unable to determine current swparams for playback: %s\n"
msgstr "Fehler beim Lesen der Software-Parameter: %s\n"
-#: speaker-test/speaker-test.c:572
+#: speaker-test/speaker-test.c:501
#, c-format
msgid "Unable to set start threshold mode for playback: %s\n"
msgstr "Fehler beim Setzen des Start-Schwellenwertes: %s\n"
-#: speaker-test/speaker-test.c:579
+#: speaker-test/speaker-test.c:508
#, c-format
msgid "Unable to set avail min for playback: %s\n"
msgstr "Fehler beim Setzen des Mindest-verfügbar-Wertes: %s\n"
-#: speaker-test/speaker-test.c:586
+#: speaker-test/speaker-test.c:515
#, c-format
msgid "Unable to set sw params for playback: %s\n"
msgstr "Fehler beim Setzen der Software-Parameter: %s\n"
-#: speaker-test/speaker-test.c:606
-#, fuzzy, c-format
-msgid "Unable to set channel map: %s\n"
-msgstr "Fehler beim Setzen des Mindest-verfügbar-Wertes: %s\n"
-
-#: speaker-test/speaker-test.c:626
+#: speaker-test/speaker-test.c:530
#, c-format
msgid "Can't recovery from underrun, prepare failed: %s\n"
msgstr ""
"Fehler bei Unterlauf-Behandlung, Re-Initialisierung fehlgeschlagen: %s\n"
-#: speaker-test/speaker-test.c:637
+#: speaker-test/speaker-test.c:541
#, c-format
msgid "Can't recovery from suspend, prepare failed: %s\n"
msgstr ""
"Fehler beim Aufwachen aus dem Ruhezustand, Re-Initialisierung "
"fehlgeschlagen: %s\n"
-#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#: speaker-test/speaker-test.c:605 speaker-test/speaker-test.c:1025
#, c-format
msgid "No enough memory\n"
msgstr "Nicht genug Speicher\n"
-#: speaker-test/speaker-test.c:706
+#: speaker-test/speaker-test.c:610
#, c-format
msgid "Cannot open WAV file %s\n"
msgstr "Kann WAV-Datei %s nicht öffnen\n"
-#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#: speaker-test/speaker-test.c:614 speaker-test/speaker-test.c:643
#, c-format
msgid "Invalid WAV file %s\n"
msgstr "Ungültige WAV-Datei %s\n"
-#: speaker-test/speaker-test.c:715
+#: speaker-test/speaker-test.c:619
#, c-format
msgid "Not a WAV file: %s\n"
msgstr "Keine WAV-Datei: %s\n"
-#: speaker-test/speaker-test.c:719
+#: speaker-test/speaker-test.c:623
#, c-format
msgid "Unsupported WAV format %d for %s\n"
msgstr "Nicht unterstütztes WAV-Format %d in %s\n"
-#: speaker-test/speaker-test.c:724
+#: speaker-test/speaker-test.c:628
#, c-format
msgid "%s is not a mono stream (%d channels)\n"
msgstr "%s ist keine Mono-Datei (%d Kanäle)\n"
-#: speaker-test/speaker-test.c:729
+#: speaker-test/speaker-test.c:633
#, c-format
msgid "Sample rate doesn't match (%d) for %s\n"
msgstr "Sample-Rate (%d) stimmt nicht überein in %s\n"
-#: speaker-test/speaker-test.c:734
+#: speaker-test/speaker-test.c:638
#, c-format
msgid "Unsupported sample format bits %d for %s\n"
msgstr "Nicht unterstütztes Sample-Format mit %d Bits in %s\n"
-#: speaker-test/speaker-test.c:795
+#: speaker-test/speaker-test.c:688
#, c-format
msgid "Undefined channel %d\n"
msgstr "Kanal %d nicht definiert\n"
-#: speaker-test/speaker-test.c:846
+#: speaker-test/speaker-test.c:739
#, c-format
msgid "Write error: %d,%s\n"
msgstr "Schreibfehler: %d, %s\n"
-#: speaker-test/speaker-test.c:848
+#: speaker-test/speaker-test.c:741
#, c-format
msgid "xrun_recovery failed: %d,%s\n"
msgstr "xrun_recovery fehlgeschlagen: %d, %s\n"
-#: speaker-test/speaker-test.c:934
-#, fuzzy, c-format
+#: speaker-test/speaker-test.c:803
+#, c-format
msgid ""
"Usage: speaker-test [OPTION]... \n"
"-h,--help\thelp\n"
@@ -1518,7 +1487,6 @@
"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
"-w,--wavfile\tUse the given WAV file as a test sound\n"
"-W,--wavdir\tSpecify the directory containing WAV files\n"
-"-m,--chmap\tSpecify the channel map to override\n"
"\n"
msgstr ""
"Verwendung: speaker-test [Option]...\n"
@@ -1538,81 +1506,72 @@
"-W,--wavdir benutze Verzeichnis mit darin enthaltenen WAV-Dateien\n"
"\n"
-#: speaker-test/speaker-test.c:1063
+#: speaker-test/speaker-test.c:921
#, c-format
msgid "Invalid number of periods %d\n"
msgstr "Ungültige Periodenanzahl %d\n"
-#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#: speaker-test/speaker-test.c:937 speaker-test/speaker-test.c:941
#, c-format
msgid "Invalid test type %s\n"
msgstr "Ungültiger Test-Typ %s\n"
-#: speaker-test/speaker-test.c:1095
+#: speaker-test/speaker-test.c:953
#, c-format
msgid "Invalid parameter for -s option.\n"
msgstr "Ungültiger Wert für Option -s\n"
-#: speaker-test/speaker-test.c:1114
+#: speaker-test/speaker-test.c:967
#, c-format
msgid "Unknown option '%c'\n"
msgstr "Unbekannte Options '%c'\n"
-#: speaker-test/speaker-test.c:1128
+#: speaker-test/speaker-test.c:981
#, c-format
msgid "Playback device is %s\n"
msgstr "Wiedergabe-Gerät ist %s\n"
-#: speaker-test/speaker-test.c:1129
+#: speaker-test/speaker-test.c:982
#, c-format
msgid "Stream parameters are %iHz, %s, %i channels\n"
msgstr "Stream-Parameter sind %i Hz, %s, %i Kanäle\n"
-#: speaker-test/speaker-test.c:1132
+#: speaker-test/speaker-test.c:985
#, c-format
msgid "Using 16 octaves of pink noise\n"
msgstr "Verwende 16 Oktaven rosa Rauschen\n"
-#: speaker-test/speaker-test.c:1135
+#: speaker-test/speaker-test.c:988
#, c-format
msgid "Sine wave rate is %.4fHz\n"
msgstr "Sinuswelle mit Frequenz %.4f Hz\n"
-#: speaker-test/speaker-test.c:1138
+#: speaker-test/speaker-test.c:991
#, c-format
msgid "WAV file(s)\n"
msgstr "WAV-Datei(en)\n"
-#: speaker-test/speaker-test.c:1148
+#: speaker-test/speaker-test.c:997
#, c-format
msgid "Playback open error: %d,%s\n"
msgstr "Fehler beim Öffnen des Gerätes: %d, %s\n"
-#: speaker-test/speaker-test.c:1154
+#: speaker-test/speaker-test.c:1002
#, c-format
msgid "Setting of hwparams failed: %s\n"
msgstr "Fehler beim Setzen der Hardware-Parameter: %s\n"
-#: speaker-test/speaker-test.c:1158
+#: speaker-test/speaker-test.c:1007
#, c-format
msgid "Setting of swparams failed: %s\n"
msgstr "Fehler beim Setzen der Software-Parameter: %s\n"
-#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#: speaker-test/speaker-test.c:1056 speaker-test/speaker-test.c:1078
#, c-format
msgid "Transfer failed: %s\n"
msgstr "Schreibfehler: %s\n"
-#: speaker-test/speaker-test.c:1213
+#: speaker-test/speaker-test.c:1066
#, c-format
msgid "Time per period = %lf\n"
msgstr "Zeit pro Periode = %lf\n"
-
-#~ msgid "Warning: format is changed to S16_LE\n"
-#~ msgstr "Warnung: benutztes Format ist S16_LE\n"
-
-#~ msgid "Warning: format is changed to S24_3LE\n"
-#~ msgstr "Warnung: benutztes Format ist S24_3LE\n"
-
-#~ msgid "Warning: format is changed to S24_LE\n"
-#~ msgstr "Warnung: benutztes Format ist S24_LE\n"
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
deleted file mode 100644
index fedb6a0..0000000
--- a/po/en@boldquot.header
+++ /dev/null
@@ -1,25 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
-# This catalog furthermore displays the text between the quotation marks in
-# bold face, assuming the VT100/XTerm escape sequences.
-#
diff --git a/po/en@quot.header b/po/en@quot.header
deleted file mode 100644
index a9647fc..0000000
--- a/po/en@quot.header
+++ /dev/null
@@ -1,22 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
diff --git a/po/fr.gmo b/po/fr.gmo
deleted file mode 100644
index bcb6497..0000000
--- a/po/fr.gmo
+++ /dev/null
Binary files differ
diff --git a/po/fr.po b/po/fr.po
index 92242d4..a6028a4 100644
--- a/po/fr.po
+++ b/po/fr.po
@@ -7,36 +7,35 @@
msgstr ""
"Project-Id-Version: alsa-utils 1.0.23\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"POT-Creation-Date: 2011-01-07 06:23+0100\n"
"PO-Revision-Date: 2011-01-07 06:23+0100\n"
"Last-Translator: Christoph J. Thompson <cjsthompson@gmail.com>\n"
"Language-Team: French <fr@li.org>\n"
-"Language: fr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: alsamixer/card_select.c:126 alsamixer/device_name.c:126
+#: ../alsamixer/card_select.c:126 ../alsamixer/device_name.c:126
msgid "Sound Card"
msgstr "Carte Son"
-#: alsamixer/card_select.c:181
+#: ../alsamixer/card_select.c:181
msgid "(default)"
msgstr "(par défaut)"
-#: alsamixer/card_select.c:191
+#: ../alsamixer/card_select.c:191
msgid "cannot enumerate sound cards"
msgstr "les cartes son n'ont pas pu être énumérées"
-#: alsamixer/card_select.c:215
+#: ../alsamixer/card_select.c:215
msgid "enter device name..."
msgstr "entrez le nom du périphérique..."
-#: alsamixer/cli.c:40
+#: ../alsamixer/cli.c:40
msgid "Usage: alsamixer [options]"
msgstr "Utilisation: alsamixer [options]"
-#: alsamixer/cli.c:41
+#: ../alsamixer/cli.c:41
msgid ""
"Useful options:\n"
" -h, --help this help\n"
@@ -50,7 +49,7 @@
" -D, --device=NOM nom du périphérique de mixage\n"
" -V, --view=MODE mode de visualisation par défaut: lecture/capture/tous"
-#: alsamixer/cli.c:46
+#: ../alsamixer/cli.c:46
msgid ""
"Debugging options:\n"
" -g, --no-color toggle using of colors\n"
@@ -60,328 +59,330 @@
" -g, --no-color supprimer la couleur\n"
" -a, --abstraction=NOM niveau d'abstraction du mixeur: aucun/basique"
-#: alsamixer/cli.c:77
+#: ../alsamixer/cli.c:77
#, c-format
msgid "invalid card index: %s\n"
msgstr "index de carte invalide: %s\n"
-#: alsamixer/cli.c:103
+#: ../alsamixer/cli.c:103
#, c-format
msgid "unknown abstraction level: %s\n"
msgstr "niveau d'abstraction inconnu: %s\n"
-#: alsamixer/cli.c:108
+#: ../alsamixer/cli.c:108
#, c-format
msgid "unknown option: %c\n"
msgstr "option inconnue: %c\n"
-#: alsamixer/cli.c:110
+#: ../alsamixer/cli.c:110
msgid "try `alsamixer --help' for more information\n"
msgstr "essayez `alsamixer --help' pour plus d'information\n"
-#: alsamixer/device_name.c:177
+#: ../alsamixer/device_name.c:177
msgid "Device name:"
msgstr "Nom du périphérique:"
-#: alsamixer/die.c:37
+#: ../alsamixer/die.c:37
#, c-format
msgid "%s: %s\n"
msgstr "%s: %s\n"
-#: alsamixer/mixer_display.c:98
+#: ../alsamixer/mixer_display.c:95
msgid "Card:"
msgstr "Carte:"
-#: alsamixer/mixer_display.c:99
+#: ../alsamixer/mixer_display.c:96
msgid "Chip:"
msgstr "Puce:"
-#: alsamixer/mixer_display.c:100
+#: ../alsamixer/mixer_display.c:97
msgid "View:"
msgstr "Vue:"
-#: alsamixer/mixer_display.c:101
+#: ../alsamixer/mixer_display.c:98
msgid "Item:"
msgstr "Contrôle:"
-#: alsamixer/mixer_display.c:104
+#: ../alsamixer/mixer_display.c:101
msgid "F1: Help"
msgstr "F1: Aide"
-#: alsamixer/mixer_display.c:105
+#: ../alsamixer/mixer_display.c:102
msgid "F2: System information"
msgstr "F2: Informations Système"
-#: alsamixer/mixer_display.c:106
+#: ../alsamixer/mixer_display.c:103
msgid "F6: Select sound card"
msgstr "F6: Choisir la carte son"
-#: alsamixer/mixer_display.c:107
+#: ../alsamixer/mixer_display.c:104
msgid "Esc: Exit"
msgstr "Esc: Quitter"
-#: alsamixer/mixer_display.c:174
+#: ../alsamixer/mixer_display.c:171
msgid "(unplugged)"
msgstr "(non branché)"
-#: alsamixer/mixer_display.c:192
+#: ../alsamixer/mixer_display.c:189
msgid "Playback"
msgstr "Lecture"
-#: alsamixer/mixer_display.c:193
+#: ../alsamixer/mixer_display.c:190
msgid "Capture"
msgstr "Capture"
-#: alsamixer/mixer_display.c:194
+#: ../alsamixer/mixer_display.c:191
msgid "All"
msgstr "Tout"
-#: alsamixer/mixer_display.c:234
+#: ../alsamixer/mixer_display.c:231
msgid "mute"
msgstr "muet"
-#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+#: ../alsamixer/mixer_display.c:272 ../alsamixer/mixer_display.c:282
msgid "dB gain:"
msgstr "gain dB:"
-#: alsamixer/mixer_display.c:285
+#: ../alsamixer/mixer_display.c:282
#, c-format
msgid " [%s %s, %s]"
msgstr " [%s %s, %s]"
-#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
-#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+#: ../alsamixer/mixer_display.c:291 ../alsamixer/mixer_display.c:297
+#: ../alsamixer/mixer_display.c:303 ../alsamixer/mixer_display.c:309
msgid "Off"
msgstr "Fermé"
-#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+#: ../alsamixer/mixer_display.c:297 ../alsamixer/mixer_display.c:309
msgid "On"
msgstr "Ouvert"
-#: alsamixer/mixer_display.c:363
+#: ../alsamixer/mixer_display.c:360
msgid "The sound device was unplugged."
msgstr "Le périphérique a été débranché"
-#: alsamixer/mixer_display.c:364
+#: ../alsamixer/mixer_display.c:361
msgid "Press F6 to select another sound card."
msgstr "Appuyez sur F6 pour choisir une autre carte son."
-#: alsamixer/mixer_display.c:379
+#: ../alsamixer/mixer_display.c:376
msgid "This sound device does not have any playback controls."
msgstr "Ce périphérique n'a pas de commandes de lecture."
-#: alsamixer/mixer_display.c:381
+#: ../alsamixer/mixer_display.c:378
msgid "This sound device does not have any capture controls."
msgstr "Ce périphérique n'a pas de commandes de capture."
-#: alsamixer/mixer_display.c:383
+#: ../alsamixer/mixer_display.c:380
msgid "This sound device does not have any controls."
msgstr "Ce périphérique n'a pas de commandes."
#. TRANSLATORS: playback on; one character
-#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+#: ../alsamixer/mixer_display.c:537 ../alsamixer/mixer_display.c:542
msgid "O"
msgstr "O"
#. TRANSLATORS: playback muted; one character
-#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+#: ../alsamixer/mixer_display.c:539 ../alsamixer/mixer_display.c:543
msgid "M"
msgstr "M"
#. TRANSLATORS: "left"; no more than two characters
-#: alsamixer/mixer_display.c:536
+#: ../alsamixer/mixer_display.c:557
msgid "L"
msgstr "G"
#. TRANSLATORS: "right"; no more than two characters
-#: alsamixer/mixer_display.c:540
+#: ../alsamixer/mixer_display.c:561
msgid "R"
msgstr "D"
#. TRANSLATORS: no more than eight characters
-#: alsamixer/mixer_display.c:542
+#: ../alsamixer/mixer_display.c:563
msgid "CAPTURE"
msgstr "CAPTURE"
-#: alsamixer/mixer_display.c:592
+#: ../alsamixer/mixer_display.c:613
msgid "Front"
msgstr "Avant"
-#: alsamixer/mixer_display.c:595
+#: ../alsamixer/mixer_display.c:616
msgid "Rear"
msgstr "Arrière"
-#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+#. 4
+#: ../alsamixer/mixer_display.c:619 ../speaker-test/speaker-test.c:107
msgid "Center"
msgstr "Centre"
-#: alsamixer/mixer_display.c:601
+#: ../alsamixer/mixer_display.c:622
msgid "Woofer"
msgstr "Basses"
-#: alsamixer/mixer_display.c:604
+#: ../alsamixer/mixer_display.c:625
msgid "Side"
msgstr "Côté"
-#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+#: ../alsamixer/mixer_widget.c:83 ../alsamixer/mixer_widget.c:88
msgid "cannot open mixer"
msgstr "le mixeur ne peut pas être ouvert"
-#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+#: ../alsamixer/mixer_widget.c:94 ../alsamixer/mixer_widget.c:171
msgid "cannot load mixer controls"
msgstr "les commandes de mixage ne peuvent pas être chargés"
-#: alsamixer/mixer_widget.c:169
+#: ../alsamixer/mixer_widget.c:161
#, c-format
msgid "Cannot open mixer device '%s'."
msgstr "Le périphérique de mixage '%s' ne peut pas être ouvert."
-#: alsamixer/mixer_widget.c:190
+#: ../alsamixer/mixer_widget.c:182
msgid "Esc Exit"
msgstr "Esc Quitter"
-#: alsamixer/mixer_widget.c:191
+#: ../alsamixer/mixer_widget.c:183
msgid "F1 ? H Help"
msgstr "F1 ? H Aide"
-#: alsamixer/mixer_widget.c:192
+#: ../alsamixer/mixer_widget.c:184
msgid "F2 / System information"
msgstr "F2 / Informations système"
-#: alsamixer/mixer_widget.c:193
+#: ../alsamixer/mixer_widget.c:185
msgid "F3 Show playback controls"
msgstr "F3 Afficher les commandes de lecture"
-#: alsamixer/mixer_widget.c:194
+#: ../alsamixer/mixer_widget.c:186
msgid "F4 Show capture controls"
msgstr "F4 Afficher les commandes de capture"
-#: alsamixer/mixer_widget.c:195
+#: ../alsamixer/mixer_widget.c:187
msgid "F5 Show all controls"
msgstr "F5 Afficher toutes les commandes"
-#: alsamixer/mixer_widget.c:196
+#: ../alsamixer/mixer_widget.c:188
msgid "Tab Toggle view mode (F3/F4/F5)"
msgstr "Tab Choisir le mode de visualisation (F3/F4/F5)"
-#: alsamixer/mixer_widget.c:197
+#: ../alsamixer/mixer_widget.c:189
msgid "F6 S Select sound card"
msgstr "F6 S Choisir la carte son"
-#: alsamixer/mixer_widget.c:198
+#: ../alsamixer/mixer_widget.c:190
msgid "L Redraw screen"
msgstr "L Actualiser l'écran"
-#: alsamixer/mixer_widget.c:200
+#: ../alsamixer/mixer_widget.c:192
msgid "Left Move to the previous control"
msgstr "Gauche Aller à la commande précédente"
-#: alsamixer/mixer_widget.c:201
+#: ../alsamixer/mixer_widget.c:193
msgid "Right Move to the next control"
msgstr "Droite Aller à la commande suivante"
-#: alsamixer/mixer_widget.c:203
+#: ../alsamixer/mixer_widget.c:195
msgid "Up/Down Change volume"
msgstr "Haut/Bas Ajuster le volume"
-#: alsamixer/mixer_widget.c:204
+#: ../alsamixer/mixer_widget.c:196
msgid "+ - Change volume"
msgstr "+ - Ajuster le volume"
-#: alsamixer/mixer_widget.c:205
+#: ../alsamixer/mixer_widget.c:197
msgid "Page Up/Dn Change volume in big steps"
msgstr "Page Préc./Suiv. Ajuster le volume en grandes intervalles"
-#: alsamixer/mixer_widget.c:206
+#: ../alsamixer/mixer_widget.c:198
msgid "End Set volume to 0%"
msgstr "Fin Couper le volume"
-#: alsamixer/mixer_widget.c:207
+#: ../alsamixer/mixer_widget.c:199
msgid "0-9 Set volume to 0%-90%"
msgstr "0-9 Ajuster le volume entre 0 et 90%"
-#: alsamixer/mixer_widget.c:208
+#: ../alsamixer/mixer_widget.c:200
msgid "Q W E Increase left/both/right volumes"
msgstr "Q W E Augmenter les volumes de gauche/centre/droite"
#. TRANSLATORS: or Y instead of Z
-#: alsamixer/mixer_widget.c:210
+#: ../alsamixer/mixer_widget.c:202
msgid "Z X C Decrease left/both/right volumes"
msgstr "Z X C Baisser les volumes de gauche/centre/droite"
-#: alsamixer/mixer_widget.c:211
+#: ../alsamixer/mixer_widget.c:203
msgid "B Balance left and right volumes"
msgstr "B Égaliser les volumes de gauche et droite"
-#: alsamixer/mixer_widget.c:213
+#: ../alsamixer/mixer_widget.c:205
msgid "M Toggle mute"
msgstr "M (Dés)activer le mode muet"
#. TRANSLATORS: or , .
-#: alsamixer/mixer_widget.c:215
+#: ../alsamixer/mixer_widget.c:207
msgid "< > Toggle left/right mute"
msgstr "< > (Dés)activer le mode muet à gauche et à droite"
-#: alsamixer/mixer_widget.c:217
+#: ../alsamixer/mixer_widget.c:209
msgid "Space Toggle capture"
msgstr "Espace (Dés)activer la capture"
#. TRANSLATORS: or Insert Delete
-#: alsamixer/mixer_widget.c:219
+#: ../alsamixer/mixer_widget.c:211
msgid "; ' Toggle left/right capture"
msgstr "; (Dés)activer la capture à gauche et à droite"
-#: alsamixer/mixer_widget.c:221
+#: ../alsamixer/mixer_widget.c:213
msgid "Authors:"
msgstr "Auteurs:"
-#: alsamixer/mixer_widget.c:222
-msgid " Tim Janik"
+#: ../alsamixer/mixer_widget.c:214
+msgid " Tim Janik <timj@gtk.org>"
msgstr ""
-#: alsamixer/mixer_widget.c:223
+#: ../alsamixer/mixer_widget.c:215
msgid " Jaroslav Kysela <perex@perex.cz>"
msgstr ""
-#: alsamixer/mixer_widget.c:224
+#: ../alsamixer/mixer_widget.c:216
msgid " Clemens Ladisch <clemens@ladisch.de>"
msgstr ""
-#: alsamixer/mixer_widget.c:226
+#: ../alsamixer/mixer_widget.c:218
msgid "Help"
msgstr "Aide"
-#: alsamixer/proc_files.c:103
+#: ../alsamixer/proc_files.c:103
msgid "Select File"
msgstr "Choisir un Fichier"
-#: alsamixer/textbox.c:52 alsamixer/textbox.c:66
+#: ../alsamixer/textbox.c:52 ../alsamixer/textbox.c:66
msgid "Error"
msgstr "Erreur"
-#: alsamixer/textbox.c:80
+#: ../alsamixer/textbox.c:80
#, c-format
msgid "Cannot open file \"%s\"."
msgstr "Le fichier \"%s\" n'a pas pu être ouvert."
-#: aplay/aplay.c:175
+#: ../aplay/aplay.c:147
msgid "raw data"
msgstr "données brutes"
-#: aplay/aplay.c:176
+#: ../aplay/aplay.c:148
msgid "VOC"
msgstr ""
-#: aplay/aplay.c:178
+#. FIXME: can WAV handle exactly 2GB or less than it?
+#: ../aplay/aplay.c:150
msgid "WAVE"
msgstr ""
-#: aplay/aplay.c:179
+#: ../aplay/aplay.c:151
msgid "Sparc Audio"
msgstr ""
-#: aplay/aplay.c:200
-#, fuzzy, c-format
+#: ../aplay/aplay.c:172
+#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"\n"
@@ -410,15 +411,12 @@
"-v, --verbose show PCM structure and setup (accumulative)\n"
"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
"-I, --separate-channels one file for each channel\n"
-"-i, --interactive allow interactive operation from stdin\n"
-"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
" --disable-resample disable automatic rate resample\n"
" --disable-channels disable automatic channel conversions\n"
" --disable-format disable automatic format conversions\n"
" --disable-softvol disable software volume control (softvol)\n"
" --test-position test ring buffer position\n"
-" --test-coef=# test coefficient for ring buffer position (default "
-"8)\n"
+" --test-coef=#\t test coeficient for ring buffer position (default 8)\n"
" expression for validation is: coef * (buffer_size / "
"2)\n"
" --test-nowait do not wait for ring buffer - eats whole CPU\n"
@@ -427,8 +425,6 @@
" for this many seconds\n"
" --process-id-file write the process ID here\n"
" --use-strftime apply the strftime facility to the output file name\n"
-" --dump-hw-params dump hw_params of the device\n"
-" --fatal-errors treat all errors as fatal\n"
msgstr ""
"Utilisation: %s [OPTION]... [FICHIER]...\n"
"\n"
@@ -449,11 +445,9 @@
"-B, --buffer-time=# la durée du tampon est de # microsecondes\n"
" --period-size=# # trames entre chaque interruption\n"
" --buffer-size=# la durée du tampon est de # trames\n"
-"-A, --avail-min=# # microsecondes min. disponibles entre chaque "
-"réveil\n"
+"-A, --avail-min=# # microsecondes min. disponibles entre chaque réveil\n"
"-R, --start-delay=# # microsecondes de délai avant le démarrage\n"
-" automatique du périphérique PCM (relatif à la "
-"taille\n"
+" automatique du périphérique PCM (relatif à la taille\n"
" du tampon si <= 0)\n"
"-T, --stop-delay=# # microsecondes de délai depuis xrun avant l'arrêt\n"
" automatique du périphérique PCM \n"
@@ -472,18 +466,17 @@
" validation est : coef * (taille_tampon / 2)\n"
" --test-nowait ne pas attendre le tampon circulaire - prend toutes\n"
" les resources du processeur\n"
-" --max-file-time=# commencer un autre fichier de capture quand "
-"l'ancien\n"
+" --max-file-time=# commencer un autre fichier de capture quand l'ancien\n"
" fichier a enregistré pendant # secondes\n"
" --process-id-file écrire l'identifiant du processus ici\n"
" --use-strftime utiliser strftime pour le nom du fichier de capture\n"
-#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#: ../aplay/aplay.c:211 ../speaker-test/speaker-test.c:750
#, c-format
msgid "Recognized sample formats are:"
msgstr "Les formats d'échantillonage connus sont:"
-#: aplay/aplay.c:250
+#: ../aplay/aplay.c:217
#, c-format
msgid ""
"\n"
@@ -492,159 +485,161 @@
"\n"
"Certains de ceux-ci ne sont peut être pas disponibles avec ce matériel\n"
-#: aplay/aplay.c:251
-#, fuzzy, c-format
-msgid "The available format shortcuts are:\n"
+#: ../aplay/aplay.c:218
+#, c-format
+msgid "The availabled format shortcuts are:\n"
msgstr "Les raccourcis format disponibles sont:\n"
-#: aplay/aplay.c:252
+#: ../aplay/aplay.c:219
#, c-format
msgid "-f cd (16 bit little endian, 44100, stereo)\n"
msgstr "-f cd (16 bit petit boutiste, 44100, stéréo)\n"
-#: aplay/aplay.c:253
+#: ../aplay/aplay.c:220
#, c-format
msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
msgstr "-f cdr (16 bit gros boutiste, 44100, stéréo)\n"
-#: aplay/aplay.c:254
+#: ../aplay/aplay.c:221
#, c-format
msgid "-f dat (16 bit little endian, 48000, stereo)\n"
msgstr "-f dat (16 bit petit boutiste, 48000, stéréo)\n"
-#: aplay/aplay.c:268
+#: ../aplay/aplay.c:235
msgid "no soundcards found..."
msgstr "aucune carte son n'a été trouvée..."
-#: aplay/aplay.c:271
+#: ../aplay/aplay.c:238
#, c-format
msgid "**** List of %s Hardware Devices ****\n"
msgstr "**** Liste des Périphériques Matériels %s ****\n"
-#: aplay/aplay.c:300
+#: ../aplay/aplay.c:267
#, c-format
msgid "card %i: %s [%s], device %i: %s [%s]\n"
msgstr "carte %i: %s [%s], périphérique %i: %s [%s]\n"
-#: aplay/aplay.c:306
+#: ../aplay/aplay.c:273
#, c-format
msgid " Subdevices: %i/%i\n"
msgstr " Sous-périphériques: %i/%i\n"
-#: aplay/aplay.c:313
+#: ../aplay/aplay.c:280
#, c-format
msgid " Subdevice #%i: %s\n"
msgstr " Sous-périphérique #%i: %s\n"
-#: aplay/aplay.c:394
+#: ../aplay/aplay.c:356
#, c-format
msgid "Aborted by signal %s...\n"
msgstr "Interrompu par le signal %s...\n"
-#: aplay/aplay.c:512
+#: ../aplay/aplay.c:467
msgid "command should be named either arecord or aplay"
msgstr "la commande doit être nommée arecord ou aplay"
-#: aplay/aplay.c:556
+#: ../aplay/aplay.c:506
#, c-format
msgid "unrecognized file format %s"
msgstr "format de fichier inconnu %s"
-#: aplay/aplay.c:563
+#: ../aplay/aplay.c:513
#, c-format
msgid "value %i for channels is invalid"
msgstr "la valeur %i pour les canaux est incorrecte"
-#: aplay/aplay.c:582
+#: ../aplay/aplay.c:532
#, c-format
msgid "wrong extended format '%s'"
msgstr "format étendu '%s' erronné"
-#: aplay/aplay.c:593
+#: ../aplay/aplay.c:543
#, c-format
msgid "bad speed value %i"
msgstr "mauvaise valeur de vitesse %i"
-#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
-#, c-format
-msgid "Unable to parse channel map string: %s\n"
-msgstr ""
-
-#: aplay/aplay.c:706
+#: ../aplay/aplay.c:638
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "Essayez `%s --help' pour plus d'informations.\n"
-#: aplay/aplay.c:722
+#: ../aplay/aplay.c:654
#, c-format
msgid "audio open error: %s"
msgstr "erreur à l'ouverture audio: %s"
-#: aplay/aplay.c:727
+#: ../aplay/aplay.c:659
#, c-format
msgid "info error: %s"
msgstr "erreur info: %s"
-#: aplay/aplay.c:734
+#: ../aplay/aplay.c:666
#, c-format
msgid "nonblock setting error: %s"
msgstr "paramètre de non-blocage erronné: %s"
-#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
-#: aplay/aplay.c:1867 aplay/aplay.c:1897
+#: ../aplay/aplay.c:676 ../aplay/aplay.c:800 ../aplay/aplay.c:1167
msgid "not enough memory"
msgstr "pas assez de mémoire"
-#: aplay/aplay.c:768
+#: ../aplay/aplay.c:700
#, c-format
msgid "Cannot create process ID file %s: %s"
msgstr "Le fichier de numéro de processus %s n'a pas pu être créé: %s"
-#: aplay/aplay.c:858
+#: ../aplay/aplay.c:790
#, c-format
msgid "read error (called from line %i)"
msgstr "erreur de lecture (appelé à la ligne %i)"
-#: aplay/aplay.c:925
+#: ../aplay/aplay.c:848
#, c-format
msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
msgstr "longueur du morceau 'fmt ' inconnue (lu %u, devrait être au moins %u)"
-#: aplay/aplay.c:936
+#: ../aplay/aplay.c:858
#, c-format
msgid ""
"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
msgstr ""
-"longueur du morceau 'fmt ' extensible inconnue (lu %u, devrait être au moins "
-"%u)"
+"longueur du morceau 'fmt ' extensible inconnue (lu %u, devrait être au moins %u)"
-#: aplay/aplay.c:941
+#: ../aplay/aplay.c:863
msgid "wrong format tag in extensible 'fmt ' chunk"
msgstr "libellé de format erronné dans le morceau extensible 'fmt '"
-#: aplay/aplay.c:948
+#: ../aplay/aplay.c:870
#, c-format
msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
-msgstr ""
-"Les formats de ficher WAVE 0x%04x qui ne sont pas encodés en PCM ouFLOAT ne "
-"sont pas supportés"
+msgstr "Les formats de ficher WAVE 0x%04x qui ne sont pas encodés en PCM ou"
+ "FLOAT ne sont pas supportés"
-#: aplay/aplay.c:953
+#: ../aplay/aplay.c:874
#, c-format
msgid "can't play WAVE-files with %d tracks"
msgstr "Les fichiers WAVE avec %d pistes ne sont pas supportés"
-#: aplay/aplay.c:961 aplay/aplay.c:1087
+#: ../aplay/aplay.c:882 ../aplay/aplay.c:982
#, c-format
msgid "Warning: format is changed to U8\n"
msgstr "Avertissement: le format est changé en U8\n"
-#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
-#, fuzzy, c-format
-msgid "Warning: format is changed to %s\n"
-msgstr "Avertissement: le format est changé en U8\n"
+#: ../aplay/aplay.c:888
+#, c-format
+msgid "Warning: format is changed to S16_LE\n"
+msgstr "Avertissement: le format est changé en S16_LE\n"
-#: aplay/aplay.c:1000
+#: ../aplay/aplay.c:896
+#, c-format
+msgid "Warning: format is changed to S24_3LE\n"
+msgstr "Avertissement: le format est changé en S24_3LE\n"
+
+#: ../aplay/aplay.c:902
+#, c-format
+msgid "Warning: format is changed to S24_LE\n"
+msgstr "Avertissement: le format est changé en S24_LE\n"
+
+#: ../aplay/aplay.c:906
#, c-format
msgid ""
" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
@@ -652,868 +647,817 @@
" les fichiers WAVE échantillonés %d bits par %d octets en largeur (%d canaux)"
"ne sont pas supportés"
-#: aplay/aplay.c:1023
+#: ../aplay/aplay.c:918
#, c-format
msgid " can't play WAVE-files with sample %d bits wide"
-msgstr ""
-" les fichiers WAVES échantillonés %d bits en largeur ne sont passupportés"
+msgstr " les fichiers WAVES échantillonés %d bits en largeur ne sont pas"
+"supportés"
-#: aplay/aplay.c:1081
+#: ../aplay/aplay.c:976
#, c-format
msgid "Warning: format is changed to MU_LAW\n"
msgstr "Avertissement: le format est changé en MU_LAW\n"
-#: aplay/aplay.c:1093
+#: ../aplay/aplay.c:988
#, c-format
msgid "Warning: format is changed to S16_BE\n"
msgstr "Avertissement: le format est changé en S16_BE\n"
-#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
-#: aplay/aplay.c:2727
+#: ../aplay/aplay.c:1001 ../aplay/aplay.c:1843 ../aplay/aplay.c:1850
+#: ../aplay/aplay.c:2372 ../aplay/aplay.c:2384
msgid "read error"
msgstr "erreur de lecture"
-#: aplay/aplay.c:1136
-msgid "Channel numbers don't match between hw_params and channel map"
-msgstr ""
-
-#: aplay/aplay.c:1145
-#, c-format
-msgid "Warning: unable to get channel map\n"
-msgstr ""
-
-#: aplay/aplay.c:1178
-#, c-format
-msgid "Channel %d doesn't match with hw_parmas"
-msgstr ""
-
-#: aplay/aplay.c:1204
+#: ../aplay/aplay.c:1031
msgid "Broken configuration for this PCM: no configurations available"
msgstr "Configuration erronée pour ce périphérique PCM: pas de configuration"
-#: aplay/aplay.c:1208
-#, c-format
-msgid "HW Params of device \"%s\":\n"
-msgstr ""
-
-#: aplay/aplay.c:1228
+#: ../aplay/aplay.c:1048
msgid "Access type not available"
msgstr "Ce type d'accès n'est pas disponible"
-#: aplay/aplay.c:1233
+#: ../aplay/aplay.c:1053
msgid "Sample format non available"
msgstr "Ce format d'échantillonage n'est pas disponible"
-#: aplay/aplay.c:1239
+#: ../aplay/aplay.c:1059
msgid "Channels count non available"
msgstr "Nombre de canaux non disponible"
-#: aplay/aplay.c:1254
+#: ../aplay/aplay.c:1074
#, c-format
msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
-msgstr ""
-"Avertissement: la fréquence n'est pas précise (demandé = %iHz,\n"
-"obtenu = %iHz)\n"
+msgstr "Avertissement: la fréquence n'est pas précise (demandé = %iHz,\n"
+ "obtenu = %iHz)\n"
-#: aplay/aplay.c:1260
+#: ../aplay/aplay.c:1080
#, c-format
msgid " please, try the plug plugin %s\n"
msgstr " veuillez essayez le greffon de branchement %s\n"
-#: aplay/aplay.c:1297
+#: ../aplay/aplay.c:1116
msgid "Unable to install hw params:"
msgstr "Les paramètres matériel n'ont pas pu être installés:"
-#: aplay/aplay.c:1304
+#: ../aplay/aplay.c:1123
#, c-format
msgid "Can't use period equal to buffer size (%lu == %lu)"
-msgstr ""
-"Une période égale à la taille du tampon (%lu == %lu) ne peut êtreutilisée"
+msgstr "Une période égale à la taille du tampon (%lu == %lu) ne peut être"
+ "utilisée"
-#: aplay/aplay.c:1335
+#: ../aplay/aplay.c:1154
msgid "unable to install sw params:"
msgstr "Les paramètres logiciel n'ont pas pu être installés:"
-#: aplay/aplay.c:1369
-#, c-format
-msgid "snd_pcm_mmap_begin problem: %s"
-msgstr ""
-
-#: aplay/aplay.c:1398
-#, c-format
-msgid "stdin O_NONBLOCK flag setup failed\n"
-msgstr ""
-
-#: aplay/aplay.c:1422
-#, c-format
-msgid "\rPAUSE command ignored (no hw support)\n"
-msgstr ""
-
-#: aplay/aplay.c:1427
-#, fuzzy, c-format
-msgid "pause push error: %s"
-msgstr "erreur d'état: %s"
-
-#: aplay/aplay.c:1436
-#, fuzzy, c-format
-msgid "pause release error: %s"
-msgstr "suspension: prepare error: %s"
-
-#: aplay/aplay.c:1452
-#, c-format
-msgid ""
-"\r=== PAUSE === "
-msgstr ""
-
-#: aplay/aplay.c:1494
+#: ../aplay/aplay.c:1229
#, c-format
msgid "status error: %s"
msgstr "erreur d'état: %s"
-#: aplay/aplay.c:1499
-#, fuzzy, c-format
-msgid "fatal %s: %s"
-msgstr "%s: %s\n"
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
-msgid "underrun"
-msgstr "perte"
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
-msgid "overrun"
-msgstr "dépassement"
-
-#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#: ../aplay/aplay.c:1239 ../aplay/aplay.c:1250
#, c-format
msgid "%s!!! (at least %.3f ms long)\n"
msgstr "%s!!! (au moins longue de %.3f ms)\n"
-#: aplay/aplay.c:1526
+#: ../aplay/aplay.c:1240 ../aplay/aplay.c:1243 ../aplay/aplay.c:1251
+msgid "underrun"
+msgstr "perte"
+
+#: ../aplay/aplay.c:1240 ../aplay/aplay.c:1251
+msgid "overrun"
+msgstr "dépassement"
+
+#: ../aplay/aplay.c:1255
#, c-format
msgid "Status:\n"
msgstr "État:\n"
-#: aplay/aplay.c:1530
+#: ../aplay/aplay.c:1259
#, c-format
msgid "xrun: prepare error: %s"
msgstr ""
-#: aplay/aplay.c:1536
+#: ../aplay/aplay.c:1265
#, c-format
msgid "Status(DRAINING):\n"
msgstr ""
-#: aplay/aplay.c:1540
+#: ../aplay/aplay.c:1269
#, c-format
msgid "capture stream format change? attempting recover...\n"
-msgstr ""
-"changement de format de flux de capture? tentative de récupération...\n"
+msgstr "changement de format de flux de capture? tentative de récupération...\n"
-#: aplay/aplay.c:1542
+#: ../aplay/aplay.c:1271
#, c-format
msgid "xrun(DRAINING): prepare error: %s"
msgstr ""
-#: aplay/aplay.c:1549
+#: ../aplay/aplay.c:1278
#, c-format
msgid "Status(R/W):\n"
msgstr ""
-#: aplay/aplay.c:1552
+#: ../aplay/aplay.c:1281
#, c-format
msgid "read/write error, state = %s"
msgstr "erreur de lecture/écriture, état = %s"
-#: aplay/aplay.c:1562
+#: ../aplay/aplay.c:1291
#, c-format
msgid "Suspended. Trying resume. "
msgstr "Suspendu. Tentative de reprise. "
-#: aplay/aplay.c:1567
+#: ../aplay/aplay.c:1296
#, c-format
msgid "Failed. Restarting stream. "
msgstr "Échec. Redémarrage du flux."
-#: aplay/aplay.c:1569
+#: ../aplay/aplay.c:1298
#, c-format
msgid "suspend: prepare error: %s"
msgstr "suspension: prepare error: %s"
-#: aplay/aplay.c:1574
+#: ../aplay/aplay.c:1303
#, c-format
msgid "Done.\n"
msgstr "Terminé.\n"
-#: aplay/aplay.c:1596
+#: ../aplay/aplay.c:1325
#, c-format
msgid " !clip "
msgstr ""
-#: aplay/aplay.c:1743
+#: ../aplay/aplay.c:1472
#, c-format
msgid "Unsupported bit size %d.\n"
msgstr "%d bit(s) non supporté(s).\n"
-#: aplay/aplay.c:1777
+#: ../aplay/aplay.c:1506
#, c-format
msgid "Max peak (%li samples): 0x%08x "
msgstr "Pic max. (%li échantillons): 0x%08x "
-#: aplay/aplay.c:1811
+#: ../aplay/aplay.c:1540
#, c-format
msgid ""
-"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
-"%li\n"
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = %"
+"li\n"
msgstr ""
-"Position de tampon suspicieuse (total %li): dispo = %li, délai = %li, tampon "
-"= %li\n"
+"Position de tampon suspicieuse (total %li): dispo = %li, délai = %li, tampon ="
+" %li\n"
-#: aplay/aplay.c:1939
+#: ../aplay/aplay.c:1603
#, c-format
msgid "write error: %s"
msgstr "erreur en écriture: %s"
-#: aplay/aplay.c:1987
+#: ../aplay/aplay.c:1649
#, c-format
msgid "writev error: %s"
msgstr "erreur de writev: %s"
-#: aplay/aplay.c:2031
+#: ../aplay/aplay.c:1692
#, c-format
msgid "read error: %s"
msgstr "erreur en lecture: %s"
-#: aplay/aplay.c:2075
+#: ../aplay/aplay.c:1735
#, c-format
msgid "readv error: %s"
msgstr "erreur de readv: %s"
-#: aplay/aplay.c:2123
+#: ../aplay/aplay.c:1783
msgid "can't allocate buffer for silence"
msgstr "Un tampon pour silence n'a pas pu être alloué"
-#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
-#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
-#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+#. to stderr
+#: ../aplay/aplay.c:1792 ../aplay/aplay.c:2018 ../aplay/aplay.c:2023
+#: ../aplay/aplay.c:2070 ../aplay/aplay.c:2079 ../aplay/aplay.c:2086
+#: ../aplay/aplay.c:2096 ../aplay/aplay.c:2102 ../aplay/aplay.c:2174
+#: ../aplay/aplay.c:2204 ../aplay/aplay.c:2218
msgid "write error"
msgstr "erreur en écriture"
-#: aplay/aplay.c:2145
+#: ../aplay/aplay.c:1805
#, c-format
msgid "voc_pcm_flush - silence error"
msgstr "voc_pcm_flush - erreur de silence"
-#: aplay/aplay.c:2148
+#: ../aplay/aplay.c:1808
msgid "voc_pcm_flush error"
msgstr "erreur voc_pcm_flush"
-#: aplay/aplay.c:2173
+#: ../aplay/aplay.c:1834
msgid "malloc error"
msgstr "erreur malloc"
-#: aplay/aplay.c:2177
+#: ../aplay/aplay.c:1838
#, c-format
msgid "Playing Creative Labs Channel file '%s'...\n"
msgstr "Lecture du ficher de canaux Creative Labs '%s'...\n"
-#: aplay/aplay.c:2245 aplay/aplay.c:2340
+#. /dev/dsp can't it
+#: ../aplay/aplay.c:1906 ../aplay/aplay.c:1998
msgid "can't play packed .voc files"
msgstr "les fichiers .voc de type 'packed' ne sont pas supportés"
-#: aplay/aplay.c:2300
+#: ../aplay/aplay.c:1958
#, c-format
msgid "can't play loops; %s isn't seekable\n"
msgstr "%s n'est pas navigable; les motifs n'ont pas pu être lus\n"
-#: aplay/aplay.c:2349
+#: ../aplay/aplay.c:2007
#, c-format
msgid "unknown blocktype %d. terminate."
msgstr "type de bloc %d inconnu. fin."
-#: aplay/aplay.c:2480
+#: ../aplay/aplay.c:2138
#, c-format
msgid "Wave doesn't support %s format..."
msgstr "Le format wave %s n'est pas supporté..."
-#: aplay/aplay.c:2540
+#: ../aplay/aplay.c:2198
#, c-format
msgid "Sparc Audio doesn't support %s format..."
msgstr "Le format %s Sparc Audio n'est pas supporté..."
-#: aplay/aplay.c:2621
+#: ../aplay/aplay.c:2279
msgid "Playing"
msgstr "Lecture"
-#: aplay/aplay.c:2621
+#: ../aplay/aplay.c:2279
msgid "Recording"
msgstr "Capture"
-#: aplay/aplay.c:2625
+#: ../aplay/aplay.c:2283
#, c-format
msgid "Rate %d Hz, "
msgstr "Fréquence %d Hz, "
-#: aplay/aplay.c:2627
+#: ../aplay/aplay.c:2285
#, c-format
msgid "Mono"
msgstr ""
-#: aplay/aplay.c:2629
+#: ../aplay/aplay.c:2287
#, c-format
msgid "Stereo"
msgstr "Stéréo"
-#: aplay/aplay.c:2631
+#: ../aplay/aplay.c:2289
#, c-format
msgid "Channels %i"
msgstr "%i Canaux"
-#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#: ../aplay/aplay.c:2798 ../aplay/aplay.c:2851
#, c-format
msgid "You need to specify %d files"
msgstr "Vous devez spécifier %d fichiers"
-#: seq/aconnect/aconnect.c:49
+#: ../seq/aconnect/aconnect.c:49
#, c-format
msgid "aconnect - ALSA sequencer connection manager\n"
msgstr "aconnect - gestionnaire de connection séquenceur ALSA\n"
-#: seq/aconnect/aconnect.c:50
+#: ../seq/aconnect/aconnect.c:50
#, c-format
msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
msgstr ""
-#: seq/aconnect/aconnect.c:51
+#: ../seq/aconnect/aconnect.c:51
#, c-format
msgid "Usage:\n"
msgstr "Utilisation:\n"
-#: seq/aconnect/aconnect.c:52
+#: ../seq/aconnect/aconnect.c:52
#, c-format
msgid " * Connection/disconnection between two ports\n"
msgstr " * Connexion/déconnexion entre deux ports\n"
-#: seq/aconnect/aconnect.c:53
+#: ../seq/aconnect/aconnect.c:53
#, c-format
msgid " aconnect [-options] sender receiver\n"
msgstr " aconnect [-options] envoyeur destinataire\n"
-#: seq/aconnect/aconnect.c:54
+#: ../seq/aconnect/aconnect.c:54
#, c-format
msgid " sender, receiver = client:port pair\n"
msgstr " envoyeur, destinataire = couple client:port\n"
-#: seq/aconnect/aconnect.c:55
+#: ../seq/aconnect/aconnect.c:55
#, c-format
msgid " -d,--disconnect disconnect\n"
msgstr " -d,--disconnect déconnecter\n"
-#: seq/aconnect/aconnect.c:56
+#: ../seq/aconnect/aconnect.c:56
#, c-format
msgid " -e,--exclusive exclusive connection\n"
msgstr " -e,--exclusive connexion exclusive\n"
-#: seq/aconnect/aconnect.c:57
+#: ../seq/aconnect/aconnect.c:57
#, c-format
msgid " -r,--real # convert real-time-stamp on queue\n"
msgstr ""
-#: seq/aconnect/aconnect.c:58
+#: ../seq/aconnect/aconnect.c:58
#, c-format
msgid " -t,--tick # convert tick-time-stamp on queue\n"
msgstr ""
-#: seq/aconnect/aconnect.c:59
+#: ../seq/aconnect/aconnect.c:59
#, c-format
msgid " * List connected ports (no subscription action)\n"
msgstr " * Afficher la liste des ports connectés (pas de souscription)\n"
-#: seq/aconnect/aconnect.c:60
+#: ../seq/aconnect/aconnect.c:60
#, c-format
msgid " aconnect -i|-o [-options]\n"
msgstr " aconnect -i|-o [-options]\n"
-#: seq/aconnect/aconnect.c:61
+#: ../seq/aconnect/aconnect.c:61
#, c-format
msgid " -i,--input list input (readable) ports\n"
msgstr " -i,--input afficher la liste des ports d'entrée\n"
-#: seq/aconnect/aconnect.c:62
+#: ../seq/aconnect/aconnect.c:62
#, c-format
msgid " -o,--output list output (writable) ports\n"
msgstr " -o,--output afficher la liste des ports de sortie\n"
-#: seq/aconnect/aconnect.c:63
+#: ../seq/aconnect/aconnect.c:63
#, c-format
msgid " -l,--list list current connections of each port\n"
-msgstr ""
-" -l,--list afficher la liste des connexions en cours\n"
-" sur chaque port\n"
+msgstr " -l,--list afficher la liste des connexions en cours\n"
+ " sur chaque port\n"
-#: seq/aconnect/aconnect.c:64
+#: ../seq/aconnect/aconnect.c:64
#, c-format
msgid " * Remove all exported connections\n"
msgstr " * Retirer toutes les connexions exportées\n"
-#: seq/aconnect/aconnect.c:65
+#: ../seq/aconnect/aconnect.c:65
#, c-format
msgid " -x, --removeall\n"
msgstr " -x, --removeall\n"
-#: seq/aconnect/aconnect.c:132
+#: ../seq/aconnect/aconnect.c:132
msgid "Connecting To"
msgstr "Connexion À"
-#: seq/aconnect/aconnect.c:133
+#: ../seq/aconnect/aconnect.c:133
msgid "Connected From"
msgstr "Connecté Depuis"
-#: seq/aconnect/aconnect.c:169
+#: ../seq/aconnect/aconnect.c:169
#, c-format
msgid "client %d: '%s' [type=%s]\n"
msgstr "client %d: '%s' [type=%s]\n"
-#: seq/aconnect/aconnect.c:173
+#: ../seq/aconnect/aconnect.c:173
msgid "user"
msgstr "utilisateur"
-#: seq/aconnect/aconnect.c:173
+#: ../seq/aconnect/aconnect.c:173
msgid "kernel"
msgstr "noyau"
-#: seq/aconnect/aconnect.c:307
+#: ../seq/aconnect/aconnect.c:307
#, c-format
msgid "can't open sequencer\n"
msgstr "le séquenceur n'a pas pu être ouvert\n"
-#: seq/aconnect/aconnect.c:335
+#: ../seq/aconnect/aconnect.c:335
#, c-format
msgid "can't get client id\n"
msgstr "l'identifiant du client n'as pas pu être obtenu\n"
-#: seq/aconnect/aconnect.c:342
+#: ../seq/aconnect/aconnect.c:342
#, c-format
msgid "can't set client info\n"
msgstr "les infos du client n'ont pas pu être définies\n"
-#: seq/aconnect/aconnect.c:349
+#: ../seq/aconnect/aconnect.c:349
#, c-format
msgid "invalid sender address %s\n"
msgstr "l'addresse envoyeur %s est incorrecte\n"
-#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
+#: ../seq/aconnect/aconnect.c:354 ../seq/aseqnet/aseqnet.c:290
#, c-format
msgid "invalid destination address %s\n"
msgstr "l'addresse destinataire %s est incorrecte\n"
-#: seq/aconnect/aconnect.c:368
+#: ../seq/aconnect/aconnect.c:368
#, c-format
msgid "No subscription is found\n"
msgstr "Aucune souscription trouvée\n"
-#: seq/aconnect/aconnect.c:373
+#: ../seq/aconnect/aconnect.c:373
#, c-format
msgid "Disconnection failed (%s)\n"
msgstr "La déconnexion a échoué (%s)\n"
-#: seq/aconnect/aconnect.c:379
+#: ../seq/aconnect/aconnect.c:379
#, c-format
msgid "Connection is already subscribed\n"
msgstr "La connexion a déjà été souscrite\n"
-#: seq/aconnect/aconnect.c:384
+#: ../seq/aconnect/aconnect.c:384
#, c-format
msgid "Connection failed (%s)\n"
msgstr "Échec de connexion (%s)\n"
-#: seq/aseqnet/aseqnet.c:164
+#: ../seq/aseqnet/aseqnet.c:164
#, c-format
msgid "aseqnet - network client/server on ALSA sequencer\n"
msgstr "aseqnet - client/serveur réseau sur le séquenceur ALSA\n"
-#: seq/aseqnet/aseqnet.c:165
+#: ../seq/aseqnet/aseqnet.c:165
#, c-format
msgid " Copyright (C) 1999 Takashi Iwai\n"
msgstr ""
-#: seq/aseqnet/aseqnet.c:166
+#: ../seq/aseqnet/aseqnet.c:166
#, c-format
msgid "usage:\n"
msgstr "utilisation:\n"
-#: seq/aseqnet/aseqnet.c:167
+#: ../seq/aseqnet/aseqnet.c:167
#, c-format
msgid " server mode: aseqnet [-options]\n"
msgstr " mode serveur: aseqnet [-options]\n"
-#: seq/aseqnet/aseqnet.c:168
+#: ../seq/aseqnet/aseqnet.c:168
#, c-format
msgid " client mode: aseqnet [-options] server_host\n"
msgstr " mode client: aseqnet [-options] hôte_serveur\n"
-#: seq/aseqnet/aseqnet.c:169
+#: ../seq/aseqnet/aseqnet.c:169
#, c-format
msgid "options:\n"
msgstr "options:\n"
-#: seq/aseqnet/aseqnet.c:170
-#, fuzzy, c-format
-msgid " -p,--port # : specify TCP port (digit or service name)\n"
+#: ../seq/aseqnet/aseqnet.c:170
+#, c-format
+msgid " -p,--port # : sepcify TCP port (digit or service name)\n"
msgstr " -p,--port # : spécifier le port TCP (numéro ou nom de service)\n"
-#: seq/aseqnet/aseqnet.c:171
+#: ../seq/aseqnet/aseqnet.c:171
#, c-format
msgid " -s,--source addr : read from given addr (client:port)\n"
msgstr " -s,--source addr : lire à partir de l'addr. donnée (client:port)\n"
-#: seq/aseqnet/aseqnet.c:172
+#: ../seq/aseqnet/aseqnet.c:172
#, c-format
msgid " -d,--dest addr : write to given addr (client:port)\n"
msgstr " -d,--dest addr : écrire à l'addr. donnée (client:port)\n"
-#: seq/aseqnet/aseqnet.c:173
+#: ../seq/aseqnet/aseqnet.c:173
#, c-format
msgid " -v, --verbose : print verbose messages\n"
msgstr " -v, --verbose : affichage locace de messages\n"
-#: seq/aseqnet/aseqnet.c:174
+#: ../seq/aseqnet/aseqnet.c:174
#, c-format
msgid " -i, --info : print certain received events\n"
msgstr " -i, --info : afficher certains évènements reçus\n"
-#: seq/aseqnet/aseqnet.c:188
+#: ../seq/aseqnet/aseqnet.c:188
#, c-format
msgid "can't malloc\n"
msgstr "échec allocation mémoire (malloc)\n"
-#: seq/aseqnet/aseqnet.c:213
+#: ../seq/aseqnet/aseqnet.c:213
#, c-format
msgid "closing files..\n"
msgstr "fermeture des fichiers...\n"
-#: seq/aseqnet/aseqnet.c:272
+#: ../seq/aseqnet/aseqnet.c:272
#, c-format
msgid "sequencer opened: %d:%d\n"
msgstr "séquenceur ouvert: %d:%d\n"
-#: seq/aseqnet/aseqnet.c:279
+#: ../seq/aseqnet/aseqnet.c:279
#, c-format
msgid "invalid source address %s\n"
msgstr "addresse source %s incorrecte\n"
-#: seq/aseqnet/aseqnet.c:309
+#: ../seq/aseqnet/aseqnet.c:309
#, c-format
msgid "service '%s' is not found in /etc/services\n"
msgstr "le service '%s' n'as pas été trouvé dans /etc/services\n"
-#: seq/aseqnet/aseqnet.c:377
+#: ../seq/aseqnet/aseqnet.c:377
#, c-format
msgid "too many connections!\n"
msgstr "trop de connexions!\n"
-#: seq/aseqnet/aseqnet.c:388
+#: ../seq/aseqnet/aseqnet.c:388
#, c-format
msgid "accepted[%d]\n"
msgstr "accepté[%d]\n"
-#: seq/aseqnet/aseqnet.c:411
+#: ../seq/aseqnet/aseqnet.c:411
#, c-format
msgid "can't get address %s\n"
msgstr "l'addresse %s na pas pu être obtenue\n"
-#: seq/aseqnet/aseqnet.c:422
+#: ../seq/aseqnet/aseqnet.c:422
#, c-format
msgid "ok.. connected\n"
msgstr "ok.. connecté\n"
-#: seq/aseqnet/aseqnet.c:518
+#: ../seq/aseqnet/aseqnet.c:518
#, c-format
msgid "Channel %2d: Control event : %5d\n"
msgstr "Canal %2d: Évènement de contrôle: %5d\n"
-#: seq/aseqnet/aseqnet.c:522
+#: ../seq/aseqnet/aseqnet.c:522
#, c-format
msgid "Channel %2d: Pitchbender : %5d\n"
msgstr "Canal %2d: Pitchbender : %5d\n"
-#: seq/aseqnet/aseqnet.c:526
+#: ../seq/aseqnet/aseqnet.c:526
#, c-format
msgid "Channel %2d: Note On event : %5d\n"
msgstr "Canal %2d: évènement Note On : %5d\n"
-#: seq/aseqnet/aseqnet.c:530
+#: ../seq/aseqnet/aseqnet.c:530
#, c-format
msgid "Channel %2d: Note Off event: %5d\n"
msgstr "Canal %2d: évènement Note Off : %5d\n"
-#: seq/aseqnet/aseqnet.c:585
+#: ../seq/aseqnet/aseqnet.c:585
#, c-format
msgid "disconnected\n"
msgstr "déconnecté\n"
-#: speaker-test/speaker-test.c:116
+#. 0
+#: ../speaker-test/speaker-test.c:103
msgid "Front Left"
msgstr "Avant Gauche"
-#: speaker-test/speaker-test.c:117
+#. 1
+#: ../speaker-test/speaker-test.c:104
msgid "Front Right"
msgstr "Avant Droit"
-#: speaker-test/speaker-test.c:118
+#. 2
+#: ../speaker-test/speaker-test.c:105
msgid "Rear Left"
msgstr "Arrière Gauche"
-#: speaker-test/speaker-test.c:119
+#. 3
+#: ../speaker-test/speaker-test.c:106
msgid "Rear Right"
msgstr "Arrière Droit"
-#: speaker-test/speaker-test.c:121
+#. 5
+#: ../speaker-test/speaker-test.c:108
msgid "LFE"
msgstr ""
-#: speaker-test/speaker-test.c:122
+#. 6
+#: ../speaker-test/speaker-test.c:109
msgid "Side Left"
msgstr "Côté Gauche"
-#: speaker-test/speaker-test.c:123
+#. 7
+#: ../speaker-test/speaker-test.c:110
msgid "Side Right"
msgstr "Côté Droit"
-#: speaker-test/speaker-test.c:124
+#. 8
+#: ../speaker-test/speaker-test.c:111
msgid "Channel 9"
msgstr "Canal 9"
-#: speaker-test/speaker-test.c:125
+#. 9
+#: ../speaker-test/speaker-test.c:112
msgid "Channel 10"
msgstr "Canal 10"
-#: speaker-test/speaker-test.c:126
+#. 10
+#: ../speaker-test/speaker-test.c:113
msgid "Channel 11"
msgstr "Canal 11"
-#: speaker-test/speaker-test.c:127
+#. 11
+#: ../speaker-test/speaker-test.c:114
msgid "Channel 12"
msgstr "Canal 12"
-#: speaker-test/speaker-test.c:128
+#. 12
+#: ../speaker-test/speaker-test.c:115
msgid "Channel 13"
msgstr "Canal 13"
-#: speaker-test/speaker-test.c:129
+#. 13
+#: ../speaker-test/speaker-test.c:116
msgid "Channel 14"
msgstr "Canal 14"
-#: speaker-test/speaker-test.c:130
+#. 14
+#: ../speaker-test/speaker-test.c:117
msgid "Channel 15"
msgstr "Canal 15"
-#: speaker-test/speaker-test.c:131
+#. 15
+#: ../speaker-test/speaker-test.c:118
msgid "Channel 16"
msgstr "Canal 16"
-#: speaker-test/speaker-test.c:454
+#: ../speaker-test/speaker-test.c:317
#, c-format
msgid "Broken configuration for playback: no configurations available: %s\n"
msgstr "Configuration erronée pour la lecture: pas de configuration: %s\n"
-#: speaker-test/speaker-test.c:461
+#: ../speaker-test/speaker-test.c:324
#, c-format
msgid "Access type not available for playback: %s\n"
msgstr "Le type d'accès est indisponible à la lecture: %s\n"
-#: speaker-test/speaker-test.c:468
+#: ../speaker-test/speaker-test.c:331
#, c-format
msgid "Sample format not available for playback: %s\n"
msgstr "Le format d'échantillonage est indisponible à la lecture: %s\n"
-#: speaker-test/speaker-test.c:475
+#: ../speaker-test/speaker-test.c:338
#, c-format
msgid "Channels count (%i) not available for playbacks: %s\n"
msgstr "Le nombre (%i) de canaux est indisponible à la lecture: %s\n"
-#: speaker-test/speaker-test.c:483
+#: ../speaker-test/speaker-test.c:346
#, c-format
msgid "Rate %iHz not available for playback: %s\n"
msgstr "La fréquence %iHz est indisponible à la lecture: %s\n"
-#: speaker-test/speaker-test.c:488
+#: ../speaker-test/speaker-test.c:351
#, c-format
msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
-msgstr ""
-"La fréquence ne correspond pas (demandée: %iHz, obtenue %iHz, err %d)\n"
+msgstr "La fréquence ne correspond pas (demandée: %iHz, obtenue %iHz, err %d)\n"
-#: speaker-test/speaker-test.c:492
+#: ../speaker-test/speaker-test.c:355
#, c-format
msgid "Rate set to %iHz (requested %iHz)\n"
msgstr "La fréquence est %iHz (demandée %iHz)\n"
-#: speaker-test/speaker-test.c:498
+#: ../speaker-test/speaker-test.c:361
#, c-format
msgid "Buffer size range from %lu to %lu\n"
msgstr "L'intervalle de la taille du tampon est de %lu à %lu\n"
-#: speaker-test/speaker-test.c:499
+#: ../speaker-test/speaker-test.c:362
#, c-format
msgid "Period size range from %lu to %lu\n"
msgstr "L'intervalle de la taille de la période est de %lu à %lu\n"
-#: speaker-test/speaker-test.c:501
+#: ../speaker-test/speaker-test.c:364
#, c-format
msgid "Requested period time %u us\n"
msgstr "Temps de période demandé %u µs\n"
-#: speaker-test/speaker-test.c:504
+#: ../speaker-test/speaker-test.c:367
#, c-format
msgid "Unable to set period time %u us for playback: %s\n"
msgstr "Le temps de période %u µs n'a pas pu être défini pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:510
+#: ../speaker-test/speaker-test.c:373
#, c-format
msgid "Requested buffer time %u us\n"
msgstr "Temps tampon demandé %u µs\n"
-#: speaker-test/speaker-test.c:513
+#: ../speaker-test/speaker-test.c:376
#, c-format
msgid "Unable to set buffer time %u us for playback: %s\n"
msgstr "Le temps tampon de %u µs n'a pas pu être définie pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:522
+#: ../speaker-test/speaker-test.c:385
#, c-format
msgid "Using max buffer size %lu\n"
msgstr "Taille max. de tampon %lu utilisée\n"
-#: speaker-test/speaker-test.c:525
+#: ../speaker-test/speaker-test.c:388
#, c-format
msgid "Unable to set buffer size %lu for playback: %s\n"
msgstr "La taile de tampon %lu n'a pas pu être définie pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:531
+#: ../speaker-test/speaker-test.c:394
#, c-format
msgid "Periods = %u\n"
msgstr "Périodes = %u\n"
-#: speaker-test/speaker-test.c:534
+#: ../speaker-test/speaker-test.c:397
#, c-format
msgid "Unable to set nperiods %u for playback: %s\n"
msgstr "nperiods %u n'a pas pu être défini pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:543
+#: ../speaker-test/speaker-test.c:406
#, c-format
msgid "Unable to set hw params for playback: %s\n"
-msgstr ""
-"Les paramètres matériel n'ont pas pu être définis pour la lecture: %s\n"
+msgstr "Les paramètres matériel n'ont pas pu être définis pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:549
+#: ../speaker-test/speaker-test.c:412
#, c-format
msgid "was set period_size = %lu\n"
msgstr ""
-#: speaker-test/speaker-test.c:550
+#: ../speaker-test/speaker-test.c:413
#, c-format
msgid "was set buffer_size = %lu\n"
msgstr ""
-#: speaker-test/speaker-test.c:552
+#: ../speaker-test/speaker-test.c:415
#, c-format
msgid "buffer to small, could not use\n"
msgstr "tampon trop petit, il n'a pas pu être utilisé\n"
-#: speaker-test/speaker-test.c:565
+#: ../speaker-test/speaker-test.c:428
#, c-format
msgid "Unable to determine current swparams for playback: %s\n"
-msgstr ""
-"Les paramètres logiciels actuels n'ont pas pu être déterminés pour la "
-"lecture: %s\n"
+msgstr "Les paramètres logiciels actuels n'ont pas pu être déterminés pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:572
+#: ../speaker-test/speaker-test.c:435
#, c-format
msgid "Unable to set start threshold mode for playback: %s\n"
msgstr ""
-#: speaker-test/speaker-test.c:579
+#: ../speaker-test/speaker-test.c:442
#, c-format
msgid "Unable to set avail min for playback: %s\n"
msgstr ""
-#: speaker-test/speaker-test.c:586
+#: ../speaker-test/speaker-test.c:449
#, c-format
msgid "Unable to set sw params for playback: %s\n"
-msgstr ""
-"Les paramètres logiciel n'ont pas pu être définis pour la lecture: %s\n"
+msgstr "Les paramètres logiciel n'ont pas pu être définis pour la lecture: %s\n"
-#: speaker-test/speaker-test.c:606
-#, fuzzy, c-format
-msgid "Unable to set channel map: %s\n"
-msgstr ""
-"Les paramètres matériel n'ont pas pu être définis pour la lecture: %s\n"
-
-#: speaker-test/speaker-test.c:626
+#: ../speaker-test/speaker-test.c:464
#, c-format
msgid "Can't recovery from underrun, prepare failed: %s\n"
msgstr ""
-#: speaker-test/speaker-test.c:637
+#: ../speaker-test/speaker-test.c:475
#, c-format
msgid "Can't recovery from suspend, prepare failed: %s\n"
msgstr ""
-#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#: ../speaker-test/speaker-test.c:539 ../speaker-test/speaker-test.c:954
#, c-format
msgid "No enough memory\n"
msgstr "Pas assez de mémoire\n"
-#: speaker-test/speaker-test.c:706
+#: ../speaker-test/speaker-test.c:544
#, c-format
msgid "Cannot open WAV file %s\n"
msgstr "Le fichier WAV %s n'a pas pu être ouvert\n"
-#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#: ../speaker-test/speaker-test.c:548 ../speaker-test/speaker-test.c:577
#, c-format
msgid "Invalid WAV file %s\n"
msgstr "Fichier WAV incorrect %s\n"
-#: speaker-test/speaker-test.c:715
+#: ../speaker-test/speaker-test.c:553
#, c-format
msgid "Not a WAV file: %s\n"
msgstr "Le fichier %s n'est pas au format WAV\n"
-#: speaker-test/speaker-test.c:719
+#: ../speaker-test/speaker-test.c:557
#, c-format
msgid "Unsupported WAV format %d for %s\n"
msgstr "Format WAV %d non supporté pour %s\n"
-#: speaker-test/speaker-test.c:724
+#: ../speaker-test/speaker-test.c:562
#, c-format
msgid "%s is not a mono stream (%d channels)\n"
msgstr "%s n'est pas un flux en mono (%d canaux)\n"
-#: speaker-test/speaker-test.c:729
+#: ../speaker-test/speaker-test.c:567
#, c-format
msgid "Sample rate doesn't match (%d) for %s\n"
msgstr "La fréquence d'échantillonage (%d) ne correspond pas à %s\n"
-#: speaker-test/speaker-test.c:734
+#: ../speaker-test/speaker-test.c:572
#, c-format
msgid "Unsupported sample format bits %d for %s\n"
msgstr "Le format d'échantillonage %d bits n'est pas supporté pour %s\n"
-#: speaker-test/speaker-test.c:795
+#: ../speaker-test/speaker-test.c:622
#, c-format
msgid "Undefined channel %d\n"
msgstr "Canal non-défini %d\n"
-#: speaker-test/speaker-test.c:846
+#: ../speaker-test/speaker-test.c:673
#, c-format
msgid "Write error: %d,%s\n"
msgstr "Erreur en écriture: %d,%s\n"
-#: speaker-test/speaker-test.c:848
+#: ../speaker-test/speaker-test.c:675
#, c-format
msgid "xrun_recovery failed: %d,%s\n"
msgstr ""
-#: speaker-test/speaker-test.c:934
-#, fuzzy, c-format
+#: ../speaker-test/speaker-test.c:734
+#, c-format
msgid ""
"Usage: speaker-test [OPTION]... \n"
"-h,--help\thelp\n"
@@ -1530,7 +1474,6 @@
"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
"-w,--wavfile\tUse the given WAV file as a test sound\n"
"-W,--wavdir\tSpecify the directory containing WAV files\n"
-"-m,--chmap\tSpecify the channel map to override\n"
"\n"
msgstr ""
"Utilisation: speaker-test [OPTION]...\n"
@@ -1551,81 +1494,73 @@
"-w,--wavdir\tSpécifier le répertoire contenant les fichiers WAV\n"
"\n"
-#: speaker-test/speaker-test.c:1063
+#: ../speaker-test/speaker-test.c:852
#, c-format
msgid "Invalid number of periods %d\n"
msgstr "Nombre de périodes %d incorrect\n"
-#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#: ../speaker-test/speaker-test.c:866 ../speaker-test/speaker-test.c:870
#, c-format
msgid "Invalid test type %s\n"
msgstr "Type de test %s incorrect\n"
-#: speaker-test/speaker-test.c:1095
+#: ../speaker-test/speaker-test.c:882
#, c-format
msgid "Invalid parameter for -s option.\n"
msgstr "Paramètre incorrect pour l'option -s.\n"
-#: speaker-test/speaker-test.c:1114
+#: ../speaker-test/speaker-test.c:896
#, c-format
msgid "Unknown option '%c'\n"
msgstr "Option '%c' inconnue\n"
-#: speaker-test/speaker-test.c:1128
+#. fixed format
+#: ../speaker-test/speaker-test.c:910
#, c-format
msgid "Playback device is %s\n"
msgstr "Le périphérique de lecture est %s\n"
-#: speaker-test/speaker-test.c:1129
+#: ../speaker-test/speaker-test.c:911
#, c-format
msgid "Stream parameters are %iHz, %s, %i channels\n"
msgstr "Les paramètres du flux sont %iHz, %s, %i canaux\n"
-#: speaker-test/speaker-test.c:1132
+#: ../speaker-test/speaker-test.c:914
#, c-format
msgid "Using 16 octaves of pink noise\n"
msgstr "Utilisation de 16 octaves de 'pink noise'\n"
-#: speaker-test/speaker-test.c:1135
+#: ../speaker-test/speaker-test.c:917
#, c-format
msgid "Sine wave rate is %.4fHz\n"
msgstr "La fréquence de la courbe sinus est %.4fHz\n"
-#: speaker-test/speaker-test.c:1138
+#: ../speaker-test/speaker-test.c:920
#, c-format
msgid "WAV file(s)\n"
msgstr "fichier(s) WAV\n"
-#: speaker-test/speaker-test.c:1148
+#: ../speaker-test/speaker-test.c:926
#, c-format
msgid "Playback open error: %d,%s\n"
msgstr "Erreur d'ouverture à la lecture: %d,%s\n"
-#: speaker-test/speaker-test.c:1154
+#: ../speaker-test/speaker-test.c:931
#, c-format
msgid "Setting of hwparams failed: %s\n"
msgstr "Échec de la configuration des paramètres matériel: %s\n"
-#: speaker-test/speaker-test.c:1158
+#: ../speaker-test/speaker-test.c:936
#, c-format
msgid "Setting of swparams failed: %s\n"
msgstr "Échec de la configuration des paramètres logiciel: %s\n"
-#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#: ../speaker-test/speaker-test.c:985 ../speaker-test/speaker-test.c:1007
#, c-format
msgid "Transfer failed: %s\n"
msgstr "Échec du transfer: %s\n"
-#: speaker-test/speaker-test.c:1213
+#: ../speaker-test/speaker-test.c:995
#, c-format
msgid "Time per period = %lf\n"
msgstr "Temps par période = %lf\n"
-
-#~ msgid "Warning: format is changed to S16_LE\n"
-#~ msgstr "Avertissement: le format est changé en S16_LE\n"
-
-#~ msgid "Warning: format is changed to S24_3LE\n"
-#~ msgstr "Avertissement: le format est changé en S24_3LE\n"
-
-#~ msgid "Warning: format is changed to S24_LE\n"
-#~ msgstr "Avertissement: le format est changé en S24_LE\n"
diff --git a/po/insert-header.sin b/po/insert-header.sin
deleted file mode 100644
index b26de01..0000000
--- a/po/insert-header.sin
+++ /dev/null
@@ -1,23 +0,0 @@
-# Sed script that inserts the file called HEADER before the header entry.
-#
-# At each occurrence of a line starting with "msgid ", we execute the following
-# commands. At the first occurrence, insert the file. At the following
-# occurrences, do nothing. The distinction between the first and the following
-# occurrences is achieved by looking at the hold space.
-/^msgid /{
-x
-# Test if the hold space is empty.
-s/m/m/
-ta
-# Yes it was empty. First occurrence. Read the file.
-r HEADER
-# Output the file's contents by reading the next line. But don't lose the
-# current line while doing this.
-g
-N
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/po/ja.gmo b/po/ja.gmo
deleted file mode 100644
index d62f2af..0000000
--- a/po/ja.gmo
+++ /dev/null
Binary files differ
diff --git a/po/ja.po b/po/ja.po
index 3c81448..2c234f4 100644
--- a/po/ja.po
+++ b/po/ja.po
@@ -8,11 +8,10 @@
msgstr ""
"Project-Id-Version: alsa-utils 1.0.9a\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-07-10 09:29+0200\n"
+"POT-Creation-Date: 2009-05-24 19:56+0200\n"
"PO-Revision-Date: 2009-05-27 15:08+0200\n"
"Last-Translator: Takashi Iwai <tiwai@suse.de>\n"
"Language-Team: Japanese\n"
-"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -90,267 +89,267 @@
msgid "%s: %s\n"
msgstr ""
-#: alsamixer/mixer_display.c:98
+#: alsamixer/mixer_display.c:95
msgid "Card:"
msgstr "カード:"
-#: alsamixer/mixer_display.c:99
+#: alsamixer/mixer_display.c:96
msgid "Chip:"
msgstr "チップ:"
-#: alsamixer/mixer_display.c:100
+#: alsamixer/mixer_display.c:97
msgid "View:"
msgstr "表示:"
-#: alsamixer/mixer_display.c:101
+#: alsamixer/mixer_display.c:98
msgid "Item:"
msgstr "項目:"
-#: alsamixer/mixer_display.c:104
+#: alsamixer/mixer_display.c:101
msgid "F1: Help"
msgstr "F1: ヘルプ"
-#: alsamixer/mixer_display.c:105
+#: alsamixer/mixer_display.c:102
msgid "F2: System information"
msgstr "F2: システム情報"
-#: alsamixer/mixer_display.c:106
+#: alsamixer/mixer_display.c:103
msgid "F6: Select sound card"
msgstr "F6: サウンドカード選択"
-#: alsamixer/mixer_display.c:107
+#: alsamixer/mixer_display.c:104
msgid "Esc: Exit"
msgstr "Esc: 終了"
-#: alsamixer/mixer_display.c:174
+#: alsamixer/mixer_display.c:171
msgid "(unplugged)"
msgstr ""
-#: alsamixer/mixer_display.c:192
+#: alsamixer/mixer_display.c:189
msgid "Playback"
msgstr "再生"
-#: alsamixer/mixer_display.c:193
+#: alsamixer/mixer_display.c:190
msgid "Capture"
msgstr "録音"
-#: alsamixer/mixer_display.c:194
+#: alsamixer/mixer_display.c:191
msgid "All"
msgstr "全て"
-#: alsamixer/mixer_display.c:234
+#: alsamixer/mixer_display.c:231
msgid "mute"
msgstr "ミュート"
-#: alsamixer/mixer_display.c:275 alsamixer/mixer_display.c:285
+#: alsamixer/mixer_display.c:272 alsamixer/mixer_display.c:282
msgid "dB gain:"
msgstr "dBゲイン:"
-#: alsamixer/mixer_display.c:285
+#: alsamixer/mixer_display.c:282
#, c-format
msgid " [%s %s, %s]"
msgstr ""
-#: alsamixer/mixer_display.c:294 alsamixer/mixer_display.c:300
-#: alsamixer/mixer_display.c:306 alsamixer/mixer_display.c:312
+#: alsamixer/mixer_display.c:291 alsamixer/mixer_display.c:297
+#: alsamixer/mixer_display.c:303 alsamixer/mixer_display.c:309
msgid "Off"
msgstr "オフ"
-#: alsamixer/mixer_display.c:300 alsamixer/mixer_display.c:312
+#: alsamixer/mixer_display.c:297 alsamixer/mixer_display.c:309
msgid "On"
msgstr "オン"
-#: alsamixer/mixer_display.c:363
+#: alsamixer/mixer_display.c:360
msgid "The sound device was unplugged."
msgstr "デバイスが接続されていません"
-#: alsamixer/mixer_display.c:364
+#: alsamixer/mixer_display.c:361
msgid "Press F6 to select another sound card."
msgstr "他のカードを選択するにはF6を押して下さい"
-#: alsamixer/mixer_display.c:379
+#: alsamixer/mixer_display.c:376
msgid "This sound device does not have any playback controls."
msgstr "このカードには再生ミキサーがありません"
-#: alsamixer/mixer_display.c:381
+#: alsamixer/mixer_display.c:378
msgid "This sound device does not have any capture controls."
msgstr "このカードには録音ミキサーがありません"
-#: alsamixer/mixer_display.c:383
+#: alsamixer/mixer_display.c:380
msgid "This sound device does not have any controls."
msgstr "このカードには制御可能なミキサーがありません"
#. TRANSLATORS: playback on; one character
-#: alsamixer/mixer_display.c:516 alsamixer/mixer_display.c:521
+#: alsamixer/mixer_display.c:512 alsamixer/mixer_display.c:517
msgid "O"
msgstr ""
#. TRANSLATORS: playback muted; one character
-#: alsamixer/mixer_display.c:518 alsamixer/mixer_display.c:522
+#: alsamixer/mixer_display.c:514 alsamixer/mixer_display.c:518
msgid "M"
msgstr ""
#. TRANSLATORS: "left"; no more than two characters
-#: alsamixer/mixer_display.c:536
+#: alsamixer/mixer_display.c:532
msgid "L"
msgstr ""
#. TRANSLATORS: "right"; no more than two characters
-#: alsamixer/mixer_display.c:540
+#: alsamixer/mixer_display.c:536
msgid "R"
msgstr ""
#. TRANSLATORS: no more than eight characters
-#: alsamixer/mixer_display.c:542
+#: alsamixer/mixer_display.c:538
msgid "CAPTURE"
msgstr "録音"
-#: alsamixer/mixer_display.c:592
+#: alsamixer/mixer_display.c:588
msgid "Front"
msgstr "フロント"
-#: alsamixer/mixer_display.c:595
+#: alsamixer/mixer_display.c:591
msgid "Rear"
msgstr "リア"
-#: alsamixer/mixer_display.c:598 speaker-test/speaker-test.c:120
+#: alsamixer/mixer_display.c:594 speaker-test/speaker-test.c:106
msgid "Center"
msgstr "センター"
-#: alsamixer/mixer_display.c:601
+#: alsamixer/mixer_display.c:597
msgid "Woofer"
msgstr "低音"
-#: alsamixer/mixer_display.c:604
+#: alsamixer/mixer_display.c:600
msgid "Side"
msgstr "サイド"
-#: alsamixer/mixer_widget.c:91 alsamixer/mixer_widget.c:96
+#: alsamixer/mixer_widget.c:83 alsamixer/mixer_widget.c:88
msgid "cannot open mixer"
msgstr "ミキサーを開けません"
-#: alsamixer/mixer_widget.c:102 alsamixer/mixer_widget.c:179
+#: alsamixer/mixer_widget.c:94 alsamixer/mixer_widget.c:171
msgid "cannot load mixer controls"
msgstr "ミキサーをロードできません"
-#: alsamixer/mixer_widget.c:169
+#: alsamixer/mixer_widget.c:161
#, c-format
msgid "Cannot open mixer device '%s'."
msgstr "ミキサーデバイス'%s'を開けません"
-#: alsamixer/mixer_widget.c:190
+#: alsamixer/mixer_widget.c:182
msgid "Esc Exit"
msgstr "Esc 終了"
-#: alsamixer/mixer_widget.c:191
+#: alsamixer/mixer_widget.c:183
msgid "F1 ? H Help"
msgstr "F1 ? H ヘルプ"
-#: alsamixer/mixer_widget.c:192
+#: alsamixer/mixer_widget.c:184
msgid "F2 / System information"
msgstr "F2 / システム情報"
-#: alsamixer/mixer_widget.c:193
+#: alsamixer/mixer_widget.c:185
msgid "F3 Show playback controls"
msgstr "F3 再生ミキサー表示"
-#: alsamixer/mixer_widget.c:194
+#: alsamixer/mixer_widget.c:186
msgid "F4 Show capture controls"
msgstr "F4 録音ミキサー表示"
-#: alsamixer/mixer_widget.c:195
+#: alsamixer/mixer_widget.c:187
msgid "F5 Show all controls"
msgstr "F5 全て表示"
-#: alsamixer/mixer_widget.c:196
+#: alsamixer/mixer_widget.c:188
msgid "Tab Toggle view mode (F3/F4/F5)"
msgstr "Tab 表示モード変更 (F3/F4/F5)"
-#: alsamixer/mixer_widget.c:197
+#: alsamixer/mixer_widget.c:189
msgid "F6 S Select sound card"
msgstr "F5 S サウンドカード選択"
-#: alsamixer/mixer_widget.c:198
+#: alsamixer/mixer_widget.c:190
msgid "L Redraw screen"
msgstr "L 画面再描画"
-#: alsamixer/mixer_widget.c:200
+#: alsamixer/mixer_widget.c:192
msgid "Left Move to the previous control"
msgstr "← 前の項目に移る"
-#: alsamixer/mixer_widget.c:201
+#: alsamixer/mixer_widget.c:193
msgid "Right Move to the next control"
msgstr "→ 次の項目に移る"
# ↑
-#: alsamixer/mixer_widget.c:203
+#: alsamixer/mixer_widget.c:195
msgid "Up/Down Change volume"
msgstr "↑/↓ 音量変更"
-#: alsamixer/mixer_widget.c:204
+#: alsamixer/mixer_widget.c:196
msgid "+ - Change volume"
msgstr "+ - 音量変更"
-#: alsamixer/mixer_widget.c:205
+#: alsamixer/mixer_widget.c:197
msgid "Page Up/Dn Change volume in big steps"
msgstr "Page Up/dn 音量変更"
-#: alsamixer/mixer_widget.c:206
+#: alsamixer/mixer_widget.c:198
msgid "End Set volume to 0%"
msgstr "End 音量 0%"
-#: alsamixer/mixer_widget.c:207
+#: alsamixer/mixer_widget.c:199
msgid "0-9 Set volume to 0%-90%"
msgstr "0-9 音量 0%-90%"
-#: alsamixer/mixer_widget.c:208
+#: alsamixer/mixer_widget.c:200
msgid "Q W E Increase left/both/right volumes"
msgstr "Q W E 左/両/右音量アップ"
#. TRANSLATORS: or Y instead of Z
-#: alsamixer/mixer_widget.c:210
+#: alsamixer/mixer_widget.c:202
msgid "Z X C Decrease left/both/right volumes"
msgstr "Z X C 左/両/右音量ダウン"
-#: alsamixer/mixer_widget.c:211
+#: alsamixer/mixer_widget.c:203
msgid "B Balance left and right volumes"
msgstr "B 左右音量を平均化する"
-#: alsamixer/mixer_widget.c:213
+#: alsamixer/mixer_widget.c:205
msgid "M Toggle mute"
msgstr "M ミュートをトグル"
#. TRANSLATORS: or , .
-#: alsamixer/mixer_widget.c:215
+#: alsamixer/mixer_widget.c:207
msgid "< > Toggle left/right mute"
msgstr "< > 左/右ミュートをトグル"
-#: alsamixer/mixer_widget.c:217
+#: alsamixer/mixer_widget.c:209
msgid "Space Toggle capture"
msgstr "スペース 録音をトグル"
#. TRANSLATORS: or Insert Delete
-#: alsamixer/mixer_widget.c:219
+#: alsamixer/mixer_widget.c:211
msgid "; ' Toggle left/right capture"
msgstr "; ' 左/右録音をトグル"
-#: alsamixer/mixer_widget.c:221
+#: alsamixer/mixer_widget.c:213
msgid "Authors:"
msgstr "作者:"
-#: alsamixer/mixer_widget.c:222
-msgid " Tim Janik"
+#: alsamixer/mixer_widget.c:214
+msgid " Tim Janik <timj@gtk.org>"
msgstr ""
-#: alsamixer/mixer_widget.c:223
+#: alsamixer/mixer_widget.c:215
msgid " Jaroslav Kysela <perex@perex.cz>"
msgstr ""
-#: alsamixer/mixer_widget.c:224
+#: alsamixer/mixer_widget.c:216
msgid " Clemens Ladisch <clemens@ladisch.de>"
msgstr ""
-#: alsamixer/mixer_widget.c:226
+#: alsamixer/mixer_widget.c:218
msgid "Help"
msgstr "ヘルプ"
@@ -367,24 +366,24 @@
msgid "Cannot open file \"%s\"."
msgstr "\"%s\"をオープンできません"
-#: aplay/aplay.c:175
+#: aplay/aplay.c:139
msgid "raw data"
msgstr "raw データ"
-#: aplay/aplay.c:176
+#: aplay/aplay.c:140
msgid "VOC"
msgstr "VOC"
-#: aplay/aplay.c:178
+#: aplay/aplay.c:142
msgid "WAVE"
msgstr "WAVE"
-#: aplay/aplay.c:179
+#: aplay/aplay.c:143
msgid "Sparc Audio"
msgstr "Sparc オーディオ"
-#: aplay/aplay.c:200
-#, fuzzy, c-format
+#: aplay/aplay.c:164
+#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"\n"
@@ -413,25 +412,15 @@
"-v, --verbose show PCM structure and setup (accumulative)\n"
"-V, --vumeter=TYPE enable VU meter (TYPE: mono or stereo)\n"
"-I, --separate-channels one file for each channel\n"
-"-i, --interactive allow interactive operation from stdin\n"
-"-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n"
" --disable-resample disable automatic rate resample\n"
" --disable-channels disable automatic channel conversions\n"
" --disable-format disable automatic format conversions\n"
" --disable-softvol disable software volume control (softvol)\n"
" --test-position test ring buffer position\n"
-" --test-coef=# test coefficient for ring buffer position (default "
-"8)\n"
+" --test-coef=#\t test coeficient for ring buffer position (default 8)\n"
" expression for validation is: coef * (buffer_size / "
"2)\n"
" --test-nowait do not wait for ring buffer - eats whole CPU\n"
-" --max-file-time=# start another output file when the old file has "
-"recorded\n"
-" for this many seconds\n"
-" --process-id-file write the process ID here\n"
-" --use-strftime apply the strftime facility to the output file name\n"
-" --dump-hw-params dump hw_params of the device\n"
-" --fatal-errors treat all errors as fatal\n"
msgstr ""
"使用法: %s [オプション]... [ファイル]...\n"
"\n"
@@ -468,12 +457,12 @@
" テスト範囲: coef * (buffer_size / 2)\n"
" --test-nowait リングバッファのウエイトを禁止 - 注意:高CPU負荷\n"
-#: aplay/aplay.c:244 speaker-test/speaker-test.c:951
+#: aplay/aplay.c:199 speaker-test/speaker-test.c:740
#, c-format
msgid "Recognized sample formats are:"
msgstr "認識されるサンプルフォーマット:"
-#: aplay/aplay.c:250
+#: aplay/aplay.c:205
#, c-format
msgid ""
"\n"
@@ -482,155 +471,154 @@
"\n"
"これらのいくつかは指定のハードウェアで使用不可能な場合があります\n"
-#: aplay/aplay.c:251
-#, fuzzy, c-format
-msgid "The available format shortcuts are:\n"
+#: aplay/aplay.c:206
+#, c-format
+msgid "The availabled format shortcuts are:\n"
msgstr "可能なフォーマットの省略形:\n"
-#: aplay/aplay.c:252
+#: aplay/aplay.c:207
#, c-format
msgid "-f cd (16 bit little endian, 44100, stereo)\n"
msgstr "-f cd (16 ビット、リトルエンディアン、44100、ステレオ)\n"
-#: aplay/aplay.c:253
+#: aplay/aplay.c:208
#, c-format
msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
msgstr "-f cdr (16 ビット、ビッグエンディアン、44100、ステレオ)\n"
-#: aplay/aplay.c:254
+#: aplay/aplay.c:209
#, c-format
msgid "-f dat (16 bit little endian, 48000, stereo)\n"
msgstr "-f dat (16 ビット、リトルエンディアン、48000、ステレオ)\n"
-#: aplay/aplay.c:268
+#: aplay/aplay.c:223
msgid "no soundcards found..."
msgstr "サウンドカードが見つかりません..."
-#: aplay/aplay.c:271
+#: aplay/aplay.c:226
#, c-format
msgid "**** List of %s Hardware Devices ****\n"
msgstr "**** ハードウェアデバイス %s のリスト ****\n"
-#: aplay/aplay.c:300
+#: aplay/aplay.c:255
#, c-format
msgid "card %i: %s [%s], device %i: %s [%s]\n"
msgstr "カード %i: %s [%s], デバイス %i: %s [%s]\n"
-#: aplay/aplay.c:306
+#: aplay/aplay.c:261
#, c-format
msgid " Subdevices: %i/%i\n"
msgstr " サブデバイス: %i/%i\n"
-#: aplay/aplay.c:313
+#: aplay/aplay.c:268
#, c-format
msgid " Subdevice #%i: %s\n"
msgstr " サブデバイス #%i: %s\n"
-#: aplay/aplay.c:394
+#: aplay/aplay.c:332
#, c-format
msgid "Aborted by signal %s...\n"
msgstr "シグナル %s で中断...\n"
-#: aplay/aplay.c:512
+#: aplay/aplay.c:430
msgid "command should be named either arecord or aplay"
msgstr "arecord または aplay コマンドのみ可能"
-#: aplay/aplay.c:556
+#: aplay/aplay.c:469
#, c-format
msgid "unrecognized file format %s"
msgstr "不正なファイルフォーマット %s"
-#: aplay/aplay.c:563
+#: aplay/aplay.c:476
#, c-format
msgid "value %i for channels is invalid"
msgstr "不正なチャネル数 %i"
-#: aplay/aplay.c:582
+#: aplay/aplay.c:495
#, c-format
msgid "wrong extended format '%s'"
msgstr "不正な拡張フォーマット '%s'"
-#: aplay/aplay.c:593
+#: aplay/aplay.c:506
#, c-format
msgid "bad speed value %i"
msgstr "不正なレート値 %i"
-#: aplay/aplay.c:700 speaker-test/speaker-test.c:601
-#, fuzzy, c-format
-msgid "Unable to parse channel map string: %s\n"
-msgstr "avail_min を設定できません: %s\n"
-
-#: aplay/aplay.c:706
+#: aplay/aplay.c:592
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "より詳しい情報は「%s --help」を実行してください\n"
-#: aplay/aplay.c:722
+#: aplay/aplay.c:608
#, c-format
msgid "audio open error: %s"
msgstr ""
-#: aplay/aplay.c:727
+#: aplay/aplay.c:613
#, c-format
msgid "info error: %s"
msgstr ""
-#: aplay/aplay.c:734
+#: aplay/aplay.c:620
#, c-format
msgid "nonblock setting error: %s"
msgstr ""
-#: aplay/aplay.c:744 aplay/aplay.c:868 aplay/aplay.c:1158 aplay/aplay.c:1351
-#: aplay/aplay.c:1867 aplay/aplay.c:1897
+#: aplay/aplay.c:630 aplay/aplay.c:737 aplay/aplay.c:1092
msgid "not enough memory"
msgstr "メモリが足りません"
-#: aplay/aplay.c:768
-#, fuzzy, c-format
-msgid "Cannot create process ID file %s: %s"
-msgstr "WAVファイルがオープンできません: %s\n"
-
-#: aplay/aplay.c:858
+#: aplay/aplay.c:727
#, c-format
msgid "read error (called from line %i)"
msgstr "リードエラー (%i 行)"
-#: aplay/aplay.c:925
+#: aplay/aplay.c:785
#, c-format
msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
msgstr ""
-#: aplay/aplay.c:936
+#: aplay/aplay.c:795
#, c-format
msgid ""
"unknown length of extensible 'fmt ' chunk (read %u, should be %u at least)"
msgstr ""
-#: aplay/aplay.c:941
+#: aplay/aplay.c:800
msgid "wrong format tag in extensible 'fmt ' chunk"
msgstr ""
-#: aplay/aplay.c:948
+#: aplay/aplay.c:807
#, c-format
msgid "can't play WAVE-file format 0x%04x which is not PCM or FLOAT encoded"
msgstr ""
-#: aplay/aplay.c:953
+#: aplay/aplay.c:811
#, c-format
msgid "can't play WAVE-files with %d tracks"
msgstr "%d トラックを含む WAVE ファイルは再生できません"
-#: aplay/aplay.c:961 aplay/aplay.c:1087
+#: aplay/aplay.c:819 aplay/aplay.c:919
#, c-format
msgid "Warning: format is changed to U8\n"
msgstr "警告: フォーマットは U8 に変更されます\n"
-#: aplay/aplay.c:971 aplay/aplay.c:984 aplay/aplay.c:995
-#, fuzzy, c-format
-msgid "Warning: format is changed to %s\n"
-msgstr "警告: フォーマットは U8 に変更されます\n"
+#: aplay/aplay.c:825
+#, c-format
+msgid "Warning: format is changed to S16_LE\n"
+msgstr "警告: フォーマットは S16_LE に変更されます\n"
-#: aplay/aplay.c:1000
+#: aplay/aplay.c:833
+#, c-format
+msgid "Warning: format is changed to S24_3LE\n"
+msgstr "警告: フォーマットは S24_3LE に変更されます\n"
+
+#: aplay/aplay.c:839
+#, c-format
+msgid "Warning: format is changed to S24_LE\n"
+msgstr "警告: フォーマットは S24_LE に変更されます\n"
+
+#: aplay/aplay.c:843
#, c-format
msgid ""
" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
@@ -638,316 +626,261 @@
"%2$d バイト長 %1$d サンプルビット (%3$d チャネル) の WAVE ファイルは再生でき"
"ません"
-#: aplay/aplay.c:1023
+#: aplay/aplay.c:855
#, c-format
msgid " can't play WAVE-files with sample %d bits wide"
msgstr "%d ビット長のサンプルの WAVE ファイルは再生できません"
-#: aplay/aplay.c:1081
+#: aplay/aplay.c:913
#, c-format
msgid "Warning: format is changed to MU_LAW\n"
msgstr "警告: フォーマットは MU_LAW に変更されます\n"
-#: aplay/aplay.c:1093
+#: aplay/aplay.c:925
#, c-format
msgid "Warning: format is changed to S16_BE\n"
msgstr "警告: フォーマットは S16_BE に変更されます\n"
-#: aplay/aplay.c:1106 aplay/aplay.c:2182 aplay/aplay.c:2189 aplay/aplay.c:2715
-#: aplay/aplay.c:2727
+#: aplay/aplay.c:938 aplay/aplay.c:1768 aplay/aplay.c:1775 aplay/aplay.c:2297
+#: aplay/aplay.c:2309
msgid "read error"
msgstr "リードエラー"
-#: aplay/aplay.c:1136
-msgid "Channel numbers don't match between hw_params and channel map"
-msgstr ""
-
-#: aplay/aplay.c:1145
-#, c-format
-msgid "Warning: unable to get channel map\n"
-msgstr ""
-
-#: aplay/aplay.c:1178
-#, c-format
-msgid "Channel %d doesn't match with hw_parmas"
-msgstr ""
-
-#: aplay/aplay.c:1204
+#: aplay/aplay.c:957
msgid "Broken configuration for this PCM: no configurations available"
msgstr "指定の PCM を使用できません: 設定がありません"
-#: aplay/aplay.c:1208
-#, c-format
-msgid "HW Params of device \"%s\":\n"
-msgstr ""
-
-#: aplay/aplay.c:1228
+#: aplay/aplay.c:974
msgid "Access type not available"
msgstr "アクセスタイプが使用不可能"
-#: aplay/aplay.c:1233
+#: aplay/aplay.c:979
msgid "Sample format non available"
msgstr "サンプルフォーマットが使用不可能"
-#: aplay/aplay.c:1239
+#: aplay/aplay.c:984
msgid "Channels count non available"
msgstr "チャネル数が使用不可能"
-#: aplay/aplay.c:1254
+#: aplay/aplay.c:999
#, c-format
msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
msgstr "警告: レートが不正確です (要求値 = %iHz, 使用値 = %iHz)\n"
-#: aplay/aplay.c:1260
+#: aplay/aplay.c:1005
#, c-format
msgid " please, try the plug plugin %s\n"
msgstr " plug プラグイン%s を使用してください\n"
-#: aplay/aplay.c:1297
+#: aplay/aplay.c:1041
msgid "Unable to install hw params:"
msgstr "hw params のインストールに失敗しました:"
-#: aplay/aplay.c:1304
+#: aplay/aplay.c:1048
#, c-format
msgid "Can't use period equal to buffer size (%lu == %lu)"
msgstr "period と buffer サイズには同じ値を使用できません (%lu == %lu)"
-#: aplay/aplay.c:1335
+#: aplay/aplay.c:1079
msgid "unable to install sw params:"
msgstr "sw params のインストールに失敗しました:"
-#: aplay/aplay.c:1369
-#, c-format
-msgid "snd_pcm_mmap_begin problem: %s"
-msgstr ""
-
-#: aplay/aplay.c:1398
-#, c-format
-msgid "stdin O_NONBLOCK flag setup failed\n"
-msgstr ""
-
-#: aplay/aplay.c:1422
-#, c-format
-msgid "\rPAUSE command ignored (no hw support)\n"
-msgstr ""
-
-#: aplay/aplay.c:1427
-#, fuzzy, c-format
-msgid "pause push error: %s"
-msgstr "ステータスエラー: %s"
-
-#: aplay/aplay.c:1436
-#, fuzzy, c-format
-msgid "pause release error: %s"
-msgstr "サスペンド: prepare エラー: %s"
-
-#: aplay/aplay.c:1452
-#, c-format
-msgid ""
-"\r=== PAUSE === "
-msgstr ""
-
-#: aplay/aplay.c:1494
+#: aplay/aplay.c:1154
#, c-format
msgid "status error: %s"
msgstr "ステータスエラー: %s"
-#: aplay/aplay.c:1499
-#, c-format
-msgid "fatal %s: %s"
-msgstr ""
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1514 aplay/aplay.c:1522
-msgid "underrun"
-msgstr "アンダーラン"
-
-#: aplay/aplay.c:1500 aplay/aplay.c:1511 aplay/aplay.c:1522
-msgid "overrun"
-msgstr "オーバーラン"
-
-#: aplay/aplay.c:1510 aplay/aplay.c:1521
+#: aplay/aplay.c:1164 aplay/aplay.c:1175
#, c-format
msgid "%s!!! (at least %.3f ms long)\n"
msgstr "%s!!! (少なくとも %.3f ms)\n"
-#: aplay/aplay.c:1526
+#: aplay/aplay.c:1165 aplay/aplay.c:1168 aplay/aplay.c:1176
+msgid "underrun"
+msgstr "アンダーラン"
+
+#: aplay/aplay.c:1165 aplay/aplay.c:1176
+msgid "overrun"
+msgstr "オーバーラン"
+
+#: aplay/aplay.c:1180
#, c-format
msgid "Status:\n"
msgstr "ステータス:\n"
-#: aplay/aplay.c:1530
+#: aplay/aplay.c:1184
#, c-format
msgid "xrun: prepare error: %s"
msgstr ""
-#: aplay/aplay.c:1536
+#: aplay/aplay.c:1190
#, c-format
msgid "Status(DRAINING):\n"
msgstr "ステータス(DRAINING):\n"
-#: aplay/aplay.c:1540
+#: aplay/aplay.c:1194
#, c-format
msgid "capture stream format change? attempting recover...\n"
msgstr "録音ストリームのフォーマットが変更？ 修復を試みます...\n"
-#: aplay/aplay.c:1542
+#: aplay/aplay.c:1196
#, c-format
msgid "xrun(DRAINING): prepare error: %s"
msgstr ""
-#: aplay/aplay.c:1549
+#: aplay/aplay.c:1203
#, c-format
msgid "Status(R/W):\n"
msgstr "ステータス(R/W):\n"
-#: aplay/aplay.c:1552
+#: aplay/aplay.c:1206
#, c-format
msgid "read/write error, state = %s"
msgstr "読み書きエラー, ステータス = %s"
-#: aplay/aplay.c:1562
+#: aplay/aplay.c:1216
#, c-format
msgid "Suspended. Trying resume. "
msgstr "サスペンド中です。レジュームします。"
-#: aplay/aplay.c:1567
+#: aplay/aplay.c:1221
#, c-format
msgid "Failed. Restarting stream. "
msgstr "失敗しました。ストリームを再スタートします。"
-#: aplay/aplay.c:1569
+#: aplay/aplay.c:1223
#, c-format
msgid "suspend: prepare error: %s"
msgstr "サスペンド: prepare エラー: %s"
-#: aplay/aplay.c:1574
+#: aplay/aplay.c:1228
#, c-format
msgid "Done.\n"
msgstr "終了\n"
-#: aplay/aplay.c:1596
+#: aplay/aplay.c:1250
#, c-format
msgid " !clip "
msgstr ""
-#: aplay/aplay.c:1743
+#: aplay/aplay.c:1397
#, c-format
msgid "Unsupported bit size %d.\n"
msgstr ""
-#: aplay/aplay.c:1777
+#: aplay/aplay.c:1431
#, c-format
msgid "Max peak (%li samples): 0x%08x "
msgstr "最大ピーク (%li サンプル): 0x%08x "
-#: aplay/aplay.c:1811
+#: aplay/aplay.c:1465
#, c-format
msgid ""
-"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = "
-"%li\n"
+"Suspicious buffer position (%li total): avail = %li, delay = %li, buffer = %"
+"li\n"
msgstr ""
-#: aplay/aplay.c:1939
+#: aplay/aplay.c:1528
#, c-format
msgid "write error: %s"
msgstr "書込エラー: %s"
-#: aplay/aplay.c:1987
+#: aplay/aplay.c:1574
#, c-format
msgid "writev error: %s"
msgstr "書込(writev)エラー: %s"
-#: aplay/aplay.c:2031
+#: aplay/aplay.c:1617
#, c-format
msgid "read error: %s"
msgstr "読込エラー: %s"
-#: aplay/aplay.c:2075
+#: aplay/aplay.c:1660
#, c-format
msgid "readv error: %s"
msgstr "読込(readv)エラー: %s"
-#: aplay/aplay.c:2123
+#: aplay/aplay.c:1708
msgid "can't allocate buffer for silence"
msgstr "サイレンス用のバッファの取得に失敗しました"
-#: aplay/aplay.c:2132 aplay/aplay.c:2360 aplay/aplay.c:2365 aplay/aplay.c:2412
-#: aplay/aplay.c:2421 aplay/aplay.c:2428 aplay/aplay.c:2438 aplay/aplay.c:2444
-#: aplay/aplay.c:2516 aplay/aplay.c:2546 aplay/aplay.c:2560
+#: aplay/aplay.c:1717 aplay/aplay.c:1943 aplay/aplay.c:1948 aplay/aplay.c:1995
+#: aplay/aplay.c:2004 aplay/aplay.c:2011 aplay/aplay.c:2021 aplay/aplay.c:2027
+#: aplay/aplay.c:2099 aplay/aplay.c:2129 aplay/aplay.c:2143
msgid "write error"
msgstr "書込エラー"
-#: aplay/aplay.c:2145
+#: aplay/aplay.c:1730
#, c-format
msgid "voc_pcm_flush - silence error"
msgstr ""
-#: aplay/aplay.c:2148
+#: aplay/aplay.c:1733
msgid "voc_pcm_flush error"
msgstr ""
-#: aplay/aplay.c:2173
+#: aplay/aplay.c:1759
msgid "malloc error"
msgstr "malloc エラー"
-#: aplay/aplay.c:2177
+#: aplay/aplay.c:1763
#, c-format
msgid "Playing Creative Labs Channel file '%s'...\n"
msgstr "Creative Labs Channel ファイル '%s' を演奏中...\n"
-#: aplay/aplay.c:2245 aplay/aplay.c:2340
+#: aplay/aplay.c:1831 aplay/aplay.c:1923
msgid "can't play packed .voc files"
msgstr "packed .voc ファイルは演奏できません"
-#: aplay/aplay.c:2300
+#: aplay/aplay.c:1883
#, c-format
msgid "can't play loops; %s isn't seekable\n"
msgstr "ループ演奏できません。%s はシーク不可能です\n"
-#: aplay/aplay.c:2349
+#: aplay/aplay.c:1932
#, c-format
msgid "unknown blocktype %d. terminate."
msgstr "未知のブロックタイプ %d: 終了します。"
-#: aplay/aplay.c:2480
+#: aplay/aplay.c:2063
#, c-format
msgid "Wave doesn't support %s format..."
msgstr "WAVE は %s フォーマットをサポートしません..."
-#: aplay/aplay.c:2540
+#: aplay/aplay.c:2123
#, c-format
msgid "Sparc Audio doesn't support %s format..."
msgstr "Sparc オーディオは %s フォーマットをサポートしません..."
-#: aplay/aplay.c:2621
+#: aplay/aplay.c:2204
msgid "Playing"
msgstr "再生中"
-#: aplay/aplay.c:2621
+#: aplay/aplay.c:2204
msgid "Recording"
msgstr "録音中"
-#: aplay/aplay.c:2625
+#: aplay/aplay.c:2208
#, c-format
msgid "Rate %d Hz, "
msgstr "レート %d Hz, "
-#: aplay/aplay.c:2627
+#: aplay/aplay.c:2210
#, c-format
msgid "Mono"
msgstr "モノラル"
-#: aplay/aplay.c:2629
+#: aplay/aplay.c:2212
#, c-format
msgid "Stereo"
msgstr "ステレオ"
-#: aplay/aplay.c:2631
+#: aplay/aplay.c:2214
#, c-format
msgid "Channels %i"
msgstr "チャネル数 %i"
-#: aplay/aplay.c:3145 aplay/aplay.c:3198
+#: aplay/aplay.c:2573 aplay/aplay.c:2626
#, c-format
msgid "You need to specify %d files"
msgstr "%d 個のファイルを指定してください"
@@ -1058,47 +991,47 @@
msgid "kernel"
msgstr "カーネル"
-#: seq/aconnect/aconnect.c:307
+#: seq/aconnect/aconnect.c:326
#, c-format
msgid "can't open sequencer\n"
msgstr "sequencer をオープンできません\n"
-#: seq/aconnect/aconnect.c:335
+#: seq/aconnect/aconnect.c:354
#, c-format
msgid "can't get client id\n"
msgstr "クライアント ID を取得できません\n"
-#: seq/aconnect/aconnect.c:342
+#: seq/aconnect/aconnect.c:361
#, c-format
msgid "can't set client info\n"
msgstr "クライアント情報を取得できません\n"
-#: seq/aconnect/aconnect.c:349
+#: seq/aconnect/aconnect.c:368
#, c-format
msgid "invalid sender address %s\n"
msgstr "送信アドレスが不正です: %s\n"
-#: seq/aconnect/aconnect.c:354 seq/aseqnet/aseqnet.c:290
+#: seq/aconnect/aconnect.c:373 seq/aseqnet/aseqnet.c:290
#, c-format
msgid "invalid destination address %s\n"
msgstr "受信アドレスが不正です: %s\n"
-#: seq/aconnect/aconnect.c:368
+#: seq/aconnect/aconnect.c:387
#, c-format
msgid "No subscription is found\n"
msgstr "接続が見つかりません\n"
-#: seq/aconnect/aconnect.c:373
+#: seq/aconnect/aconnect.c:392
#, c-format
msgid "Disconnection failed (%s)\n"
msgstr "切り離しに失敗 (%s)\n"
-#: seq/aconnect/aconnect.c:379
+#: seq/aconnect/aconnect.c:398
#, c-format
msgid "Connection is already subscribed\n"
msgstr "既に接続されています\n"
-#: seq/aconnect/aconnect.c:384
+#: seq/aconnect/aconnect.c:403
#, c-format
msgid "Connection failed (%s)\n"
msgstr "接続に失敗 (%s)\n"
@@ -1134,8 +1067,8 @@
msgstr "オプション:\n"
#: seq/aseqnet/aseqnet.c:170
-#, fuzzy, c-format
-msgid " -p,--port # : specify TCP port (digit or service name)\n"
+#, c-format
+msgid " -p,--port # : sepcify TCP port (digit or service name)\n"
msgstr " -p,--port # : TCP ポートの指定 (数字またはサービス名)\n"
#: seq/aseqnet/aseqnet.c:171
@@ -1228,263 +1161,258 @@
msgid "disconnected\n"
msgstr "切り離し\n"
-#: speaker-test/speaker-test.c:116
+#: speaker-test/speaker-test.c:102
msgid "Front Left"
msgstr ""
-#: speaker-test/speaker-test.c:117
+#: speaker-test/speaker-test.c:103
msgid "Front Right"
msgstr ""
-#: speaker-test/speaker-test.c:118
+#: speaker-test/speaker-test.c:104
msgid "Rear Left"
msgstr ""
-#: speaker-test/speaker-test.c:119
+#: speaker-test/speaker-test.c:105
msgid "Rear Right"
msgstr ""
-#: speaker-test/speaker-test.c:121
+#: speaker-test/speaker-test.c:107
msgid "LFE"
msgstr ""
-#: speaker-test/speaker-test.c:122
+#: speaker-test/speaker-test.c:108
msgid "Side Left"
msgstr ""
-#: speaker-test/speaker-test.c:123
+#: speaker-test/speaker-test.c:109
msgid "Side Right"
msgstr ""
-#: speaker-test/speaker-test.c:124
+#: speaker-test/speaker-test.c:110
msgid "Channel 9"
msgstr ""
-#: speaker-test/speaker-test.c:125
+#: speaker-test/speaker-test.c:111
msgid "Channel 10"
msgstr ""
-#: speaker-test/speaker-test.c:126
+#: speaker-test/speaker-test.c:112
msgid "Channel 11"
msgstr ""
-#: speaker-test/speaker-test.c:127
+#: speaker-test/speaker-test.c:113
msgid "Channel 12"
msgstr ""
-#: speaker-test/speaker-test.c:128
+#: speaker-test/speaker-test.c:114
msgid "Channel 13"
msgstr ""
-#: speaker-test/speaker-test.c:129
+#: speaker-test/speaker-test.c:115
msgid "Channel 14"
msgstr ""
-#: speaker-test/speaker-test.c:130
+#: speaker-test/speaker-test.c:116
msgid "Channel 15"
msgstr ""
-#: speaker-test/speaker-test.c:131
+#: speaker-test/speaker-test.c:117
msgid "Channel 16"
msgstr ""
-#: speaker-test/speaker-test.c:454
+#: speaker-test/speaker-test.c:307
#, c-format
msgid "Broken configuration for playback: no configurations available: %s\n"
msgstr "再生用に設定できません: 設定がみつかりません: %s\n"
-#: speaker-test/speaker-test.c:461
+#: speaker-test/speaker-test.c:314
#, c-format
msgid "Access type not available for playback: %s\n"
msgstr "アクセスタイプが不正です: %s\n"
-#: speaker-test/speaker-test.c:468
+#: speaker-test/speaker-test.c:321
#, c-format
msgid "Sample format not available for playback: %s\n"
msgstr "指定のサンプルフォーマットを使用できません: %s\n"
-#: speaker-test/speaker-test.c:475
+#: speaker-test/speaker-test.c:328
#, c-format
msgid "Channels count (%i) not available for playbacks: %s\n"
msgstr "チャネル数 (%i) を使用できません: %s\n"
-#: speaker-test/speaker-test.c:483
+#: speaker-test/speaker-test.c:336
#, c-format
msgid "Rate %iHz not available for playback: %s\n"
msgstr "レート %iHz を使用できません: %s\n"
-#: speaker-test/speaker-test.c:488
+#: speaker-test/speaker-test.c:341
#, c-format
msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
msgstr "設定レートが一致しません< (要求値 %iHz, 取得値 %iHz, エラー %d)\n"
-#: speaker-test/speaker-test.c:492
+#: speaker-test/speaker-test.c:345
#, c-format
msgid "Rate set to %iHz (requested %iHz)\n"
msgstr "レート %iHz (要求値 %iHz)\n"
-#: speaker-test/speaker-test.c:498
+#: speaker-test/speaker-test.c:351
#, c-format
msgid "Buffer size range from %lu to %lu\n"
msgstr "バッファサイズ範囲 %lu 〜 %lu\n"
-#: speaker-test/speaker-test.c:499
+#: speaker-test/speaker-test.c:352
#, c-format
msgid "Period size range from %lu to %lu\n"
msgstr "ピリオドサイズ範囲 %lu 〜 %lu\n"
-#: speaker-test/speaker-test.c:501
+#: speaker-test/speaker-test.c:354
#, c-format
msgid "Requested period time %u us\n"
msgstr "要求されたピリオド長 %u us\n"
-#: speaker-test/speaker-test.c:504
+#: speaker-test/speaker-test.c:357
#, c-format
msgid "Unable to set period time %u us for playback: %s\n"
msgstr "ピリオド長 %u us を設定できません: %s\n"
-#: speaker-test/speaker-test.c:510
+#: speaker-test/speaker-test.c:363
#, c-format
msgid "Requested buffer time %u us\n"
msgstr "要求されたバッファ長 %u us\n"
-#: speaker-test/speaker-test.c:513
+#: speaker-test/speaker-test.c:366
#, c-format
msgid "Unable to set buffer time %u us for playback: %s\n"
msgstr "バッファ長 %u us を設定できません: %s\n"
-#: speaker-test/speaker-test.c:522
+#: speaker-test/speaker-test.c:375
#, c-format
msgid "Using max buffer size %lu\n"
msgstr "最大バッファサイズ %lu を使用\n"
-#: speaker-test/speaker-test.c:525
+#: speaker-test/speaker-test.c:378
#, c-format
msgid "Unable to set buffer size %lu for playback: %s\n"
msgstr "バッファサイズ %lu を設定できません: %s\n"
-#: speaker-test/speaker-test.c:531
+#: speaker-test/speaker-test.c:384
#, c-format
msgid "Periods = %u\n"
msgstr "ピリオド数 = %u\n"
-#: speaker-test/speaker-test.c:534
+#: speaker-test/speaker-test.c:387
#, c-format
msgid "Unable to set nperiods %u for playback: %s\n"
msgstr "ピリオド数 %u を設定できません: %s\n"
-#: speaker-test/speaker-test.c:543
+#: speaker-test/speaker-test.c:396
#, c-format
msgid "Unable to set hw params for playback: %s\n"
msgstr "hw params を設定できません: %s\n"
-#: speaker-test/speaker-test.c:549
+#: speaker-test/speaker-test.c:402
#, c-format
msgid "was set period_size = %lu\n"
msgstr "period_size = %lu で設定\n"
-#: speaker-test/speaker-test.c:550
+#: speaker-test/speaker-test.c:403
#, c-format
msgid "was set buffer_size = %lu\n"
msgstr "buffer_size = %lu で設定\n"
-#: speaker-test/speaker-test.c:552
+#: speaker-test/speaker-test.c:405
#, c-format
msgid "buffer to small, could not use\n"
msgstr "バッファが小さすぎます\n"
-#: speaker-test/speaker-test.c:565
+#: speaker-test/speaker-test.c:418
#, c-format
msgid "Unable to determine current swparams for playback: %s\n"
msgstr "現在の swparams を取得できません: %s\n"
-#: speaker-test/speaker-test.c:572
+#: speaker-test/speaker-test.c:425
#, c-format
msgid "Unable to set start threshold mode for playback: %s\n"
msgstr "start_threshold モードを設定できません: %s\n"
-#: speaker-test/speaker-test.c:579
+#: speaker-test/speaker-test.c:432
#, c-format
msgid "Unable to set avail min for playback: %s\n"
msgstr "avail_min を設定できません: %s\n"
-#: speaker-test/speaker-test.c:586
+#: speaker-test/speaker-test.c:439
#, c-format
msgid "Unable to set sw params for playback: %s\n"
msgstr "再生用の sw params を設定できません: %s\n"
-#: speaker-test/speaker-test.c:606
-#, fuzzy, c-format
-msgid "Unable to set channel map: %s\n"
-msgstr "avail_min を設定できません: %s\n"
-
-#: speaker-test/speaker-test.c:626
+#: speaker-test/speaker-test.c:454
#, c-format
msgid "Can't recovery from underrun, prepare failed: %s\n"
msgstr "アンダーランから復帰失敗: %s\n"
-#: speaker-test/speaker-test.c:637
+#: speaker-test/speaker-test.c:465
#, c-format
msgid "Can't recovery from suspend, prepare failed: %s\n"
msgstr "サスペンドから復帰失敗: %s\n"
-#: speaker-test/speaker-test.c:701 speaker-test/speaker-test.c:1182
+#: speaker-test/speaker-test.c:529 speaker-test/speaker-test.c:926
#, c-format
msgid "No enough memory\n"
msgstr "メモリが足りません\n"
-#: speaker-test/speaker-test.c:706
+#: speaker-test/speaker-test.c:534
#, c-format
msgid "Cannot open WAV file %s\n"
msgstr "WAVファイルがオープンできません: %s\n"
-#: speaker-test/speaker-test.c:710 speaker-test/speaker-test.c:739
+#: speaker-test/speaker-test.c:538 speaker-test/speaker-test.c:567
#, c-format
msgid "Invalid WAV file %s\n"
msgstr "不正なWAVファイルです: %s\n"
-#: speaker-test/speaker-test.c:715
+#: speaker-test/speaker-test.c:543
#, c-format
msgid "Not a WAV file: %s\n"
msgstr "WAVファイルではありません: %s\n"
-#: speaker-test/speaker-test.c:719
+#: speaker-test/speaker-test.c:547
#, c-format
msgid "Unsupported WAV format %d for %s\n"
msgstr "未サポートのWAVフォーマット %d: %s\n"
-#: speaker-test/speaker-test.c:724
+#: speaker-test/speaker-test.c:552
#, c-format
msgid "%s is not a mono stream (%d channels)\n"
msgstr "%s はモノストリームではありません (%d チャネル)\n"
-#: speaker-test/speaker-test.c:729
+#: speaker-test/speaker-test.c:557
#, c-format
msgid "Sample rate doesn't match (%d) for %s\n"
msgstr "サンプルレートが不一致です(%d): %s\n"
-#: speaker-test/speaker-test.c:734
+#: speaker-test/speaker-test.c:562
#, c-format
msgid "Unsupported sample format bits %d for %s\n"
msgstr "未サポートのサンプルフォーマットビット %d: %s\n"
-#: speaker-test/speaker-test.c:795
+#: speaker-test/speaker-test.c:612
#, c-format
msgid "Undefined channel %d\n"
msgstr "未定義のチャネル %d\n"
-#: speaker-test/speaker-test.c:846
+#: speaker-test/speaker-test.c:663
#, c-format
msgid "Write error: %d,%s\n"
msgstr "書込エラー: %d,%s\n"
-#: speaker-test/speaker-test.c:848
+#: speaker-test/speaker-test.c:665
#, c-format
msgid "xrun_recovery failed: %d,%s\n"
msgstr "xrun_recovery 失敗: %d,%s\n"
-#: speaker-test/speaker-test.c:934
-#, fuzzy, c-format
+#: speaker-test/speaker-test.c:723
+#, c-format
msgid ""
"Usage: speaker-test [OPTION]... \n"
"-h,--help\thelp\n"
@@ -1501,7 +1429,6 @@
"-s,--speaker\tsingle speaker test. Values 1=Left, 2=right, etc\n"
"-w,--wavfile\tUse the given WAV file as a test sound\n"
"-W,--wavdir\tSpecify the directory containing WAV files\n"
-"-m,--chmap\tSpecify the channel map to override\n"
"\n"
msgstr ""
"使用法: speaker-test [オプション]...\n"
@@ -1522,81 +1449,72 @@
"-W,--wavdir WAVファイルのあるディレクトリを指定\n"
"\n"
-#: speaker-test/speaker-test.c:1063
+#: speaker-test/speaker-test.c:835
#, c-format
msgid "Invalid number of periods %d\n"
msgstr "不正なピリオド数 %d\n"
-#: speaker-test/speaker-test.c:1079 speaker-test/speaker-test.c:1083
+#: speaker-test/speaker-test.c:849 speaker-test/speaker-test.c:853
#, c-format
msgid "Invalid test type %s\n"
msgstr "不正なテストタイプ %s\n"
-#: speaker-test/speaker-test.c:1095
+#: speaker-test/speaker-test.c:865
#, c-format
msgid "Invalid parameter for -s option.\n"
msgstr "-s オプションの値が不正です\n"
-#: speaker-test/speaker-test.c:1114
+#: speaker-test/speaker-test.c:876
#, c-format
msgid "Unknown option '%c'\n"
msgstr "未知のオプション '%c'\n"
-#: speaker-test/speaker-test.c:1128
+#: speaker-test/speaker-test.c:890
#, c-format
msgid "Playback device is %s\n"
msgstr "再生デバイス: %s\n"
-#: speaker-test/speaker-test.c:1129
+#: speaker-test/speaker-test.c:891
#, c-format
msgid "Stream parameters are %iHz, %s, %i channels\n"
msgstr "ストリームパラメータ: %iHz, %s, %i チャネル\n"
-#: speaker-test/speaker-test.c:1132
+#: speaker-test/speaker-test.c:894
#, c-format
msgid "Using 16 octaves of pink noise\n"
msgstr "16 オクターブのピンクノイズを使用\n"
-#: speaker-test/speaker-test.c:1135
+#: speaker-test/speaker-test.c:897
#, c-format
msgid "Sine wave rate is %.4fHz\n"
msgstr "正弦波レート: %.4fHz\n"
-#: speaker-test/speaker-test.c:1138
+#: speaker-test/speaker-test.c:900
#, c-format
msgid "WAV file(s)\n"
msgstr "WAV ファイル\n"
-#: speaker-test/speaker-test.c:1148
+#: speaker-test/speaker-test.c:906
#, c-format
msgid "Playback open error: %d,%s\n"
msgstr "再生オープンエラー: %d,%s\n"
-#: speaker-test/speaker-test.c:1154
+#: speaker-test/speaker-test.c:911
#, c-format
msgid "Setting of hwparams failed: %s\n"
msgstr "hwparams の設定に失敗: %s\n"
-#: speaker-test/speaker-test.c:1158
+#: speaker-test/speaker-test.c:916
#, c-format
msgid "Setting of swparams failed: %s\n"
msgstr "swparams の設定に失敗: %s\n"
-#: speaker-test/speaker-test.c:1205 speaker-test/speaker-test.c:1227
+#: speaker-test/speaker-test.c:957 speaker-test/speaker-test.c:979
#, c-format
msgid "Transfer failed: %s\n"
msgstr "転送に失敗しました: %s\n"
-#: speaker-test/speaker-test.c:1213
+#: speaker-test/speaker-test.c:967
#, c-format
msgid "Time per period = %lf\n"
msgstr "ピリオド時間 = %lf\n"
-
-#~ msgid "Warning: format is changed to S16_LE\n"
-#~ msgstr "警告: フォーマットは S16_LE に変更されます\n"
-
-#~ msgid "Warning: format is changed to S24_3LE\n"
-#~ msgstr "警告: フォーマットは S24_3LE に変更されます\n"
-
-#~ msgid "Warning: format is changed to S24_LE\n"
-#~ msgstr "警告: フォーマットは S24_LE に変更されます\n"
diff --git a/po/quot.sed b/po/quot.sed
deleted file mode 100644
index 0122c46..0000000
--- a/po/quot.sed
+++ /dev/null
@@ -1,6 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
deleted file mode 100644
index 2436c49..0000000
--- a/po/remove-potcdate.sin
+++ /dev/null
@@ -1,19 +0,0 @@
-# Sed script that remove the POT-Creation-Date line in the header entry
-# from a POT file.
-#
-# The distinction between the first and the following occurrences of the
-# pattern is achieved by looking at the hold space.
-/^"POT-Creation-Date: .*"$/{
-x
-# Test if the hold space is empty.
-s/P/P/
-ta
-# Yes it was empty. First occurrence. Remove the line.
-g
-d
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/po/stamp-po b/po/stamp-po
deleted file mode 100644
index 9788f70..0000000
--- a/po/stamp-po
+++ /dev/null
@@ -1 +0,0 @@
-timestamp
diff --git a/seq/Makefile.in b/seq/Makefile.in
deleted file mode 100644
index 5e4e9c8..0000000
--- a/seq/Makefile.in
+++ /dev/null
@@ -1,592 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = seq
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-SUBDIRS = aconnect aplaymidi aseqdump aseqnet
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign seq/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
- cscopelist-recursive ctags-recursive install-am install-strip \
- tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic cscopelist \
- cscopelist-recursive ctags ctags-recursive distclean \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/seq/aconnect/Makefile.in b/seq/aconnect/Makefile.in
deleted file mode 100644
index 35d58ed..0000000
--- a/seq/aconnect/Makefile.in
+++ /dev/null
@@ -1,649 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = aconnect$(EXEEXT)
-subdir = seq/aconnect
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_aconnect_OBJECTS = aconnect.$(OBJEXT)
-aconnect_OBJECTS = $(am_aconnect_OBJECTS)
-aconnect_LDADD = $(LDADD)
-am__DEPENDENCIES_1 =
-aconnect_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(aconnect_SOURCES)
-DIST_SOURCES = $(aconnect_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-EXTRA_DIST = README.aconnect aconnect.1
-LDADD = $(LIBINTL)
-aconnect_SOURCES = aconnect.c
-man_MANS = aconnect.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aconnect/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign seq/aconnect/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-aconnect$(EXEEXT): $(aconnect_OBJECTS) $(aconnect_DEPENDENCIES) $(EXTRA_aconnect_DEPENDENCIES)
- @rm -f aconnect$(EXEEXT)
- $(LINK) $(aconnect_OBJECTS) $(aconnect_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aconnect.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/seq/aplaymidi/Makefile.in b/seq/aplaymidi/Makefile.in
deleted file mode 100644
index 21fc316..0000000
--- a/seq/aplaymidi/Makefile.in
+++ /dev/null
@@ -1,652 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = aplaymidi$(EXEEXT) arecordmidi$(EXEEXT)
-subdir = seq/aplaymidi
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-aplaymidi_SOURCES = aplaymidi.c
-aplaymidi_OBJECTS = aplaymidi.$(OBJEXT)
-aplaymidi_LDADD = $(LDADD)
-arecordmidi_SOURCES = arecordmidi.c
-arecordmidi_OBJECTS = arecordmidi.$(OBJEXT)
-arecordmidi_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = aplaymidi.c arecordmidi.c
-DIST_SOURCES = aplaymidi.c arecordmidi.c
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-EXTRA_DIST = aplaymidi.1 arecordmidi.1
-man_MANS = aplaymidi.1 arecordmidi.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aplaymidi/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign seq/aplaymidi/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-aplaymidi$(EXEEXT): $(aplaymidi_OBJECTS) $(aplaymidi_DEPENDENCIES) $(EXTRA_aplaymidi_DEPENDENCIES)
- @rm -f aplaymidi$(EXEEXT)
- $(LINK) $(aplaymidi_OBJECTS) $(aplaymidi_LDADD) $(LIBS)
-arecordmidi$(EXEEXT): $(arecordmidi_OBJECTS) $(arecordmidi_DEPENDENCIES) $(EXTRA_arecordmidi_DEPENDENCIES)
- @rm -f arecordmidi$(EXEEXT)
- $(LINK) $(arecordmidi_OBJECTS) $(arecordmidi_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aplaymidi.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arecordmidi.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/seq/aseqdump/Makefile.in b/seq/aseqdump/Makefile.in
deleted file mode 100644
index d93a96c..0000000
--- a/seq/aseqdump/Makefile.in
+++ /dev/null
@@ -1,645 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = aseqdump$(EXEEXT)
-subdir = seq/aseqdump
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-aseqdump_SOURCES = aseqdump.c
-aseqdump_OBJECTS = aseqdump.$(OBJEXT)
-aseqdump_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = aseqdump.c
-DIST_SOURCES = aseqdump.c
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-EXTRA_DIST = aseqdump.1
-man_MANS = aseqdump.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aseqdump/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign seq/aseqdump/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-aseqdump$(EXEEXT): $(aseqdump_OBJECTS) $(aseqdump_DEPENDENCIES) $(EXTRA_aseqdump_DEPENDENCIES)
- @rm -f aseqdump$(EXEEXT)
- $(LINK) $(aseqdump_OBJECTS) $(aseqdump_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aseqdump.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/seq/aseqnet/Makefile.in b/seq/aseqnet/Makefile.in
deleted file mode 100644
index 7647fc6..0000000
--- a/seq/aseqnet/Makefile.in
+++ /dev/null
@@ -1,648 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = aseqnet$(EXEEXT)
-subdir = seq/aseqnet
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_aseqnet_OBJECTS = aseqnet.$(OBJEXT)
-aseqnet_OBJECTS = $(am_aseqnet_OBJECTS)
-am__DEPENDENCIES_1 =
-aseqnet_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(aseqnet_SOURCES)
-DIST_SOURCES = $(aseqnet_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-EXTRA_DIST = README.aseqnet aseqnet.1
-aseqnet_SOURCES = aseqnet.c
-aseqnet_LDADD = $(INTLLIBS)
-man_MANS = aseqnet.1
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign seq/aseqnet/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign seq/aseqnet/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-aseqnet$(EXEEXT): $(aseqnet_OBJECTS) $(aseqnet_DEPENDENCIES) $(EXTRA_aseqnet_DEPENDENCIES)
- @rm -f aseqnet$(EXEEXT)
- $(LINK) $(aseqnet_OBJECTS) $(aseqnet_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aseqnet.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/seq/aseqnet/aseqnet.1 b/seq/aseqnet/aseqnet.1
index 2cb6eb7..a1dc1d3 100644
--- a/seq/aseqnet/aseqnet.1
+++ b/seq/aseqnet/aseqnet.1
@@ -1,4 +1,5 @@
.TH aseqnet 1 "January 1, 2000"
+.LO 1
.SH NAME
aseqnet \- ALSA sequencer connectors over network
diff --git a/seq/aseqnet/aseqnet.c b/seq/aseqnet/aseqnet.c
index 70a1cfd..e071ad9 100644
--- a/seq/aseqnet/aseqnet.c
+++ b/seq/aseqnet/aseqnet.c
@@ -167,7 +167,7 @@
printf(_(" server mode: aseqnet [-options]\n"));
printf(_(" client mode: aseqnet [-options] server_host\n"));
printf(_("options:\n"));
- printf(_(" -p,--port # : specify TCP port (digit or service name)\n"));
+ printf(_(" -p,--port # : sepcify TCP port (digit or service name)\n"));
printf(_(" -s,--source addr : read from given addr (client:port)\n"));
printf(_(" -d,--dest addr : write to given addr (client:port)\n"));
printf(_(" -v, --verbose : print verbose messages\n"));
diff --git a/speaker-test/Android.mk b/speaker-test/Android.mk
deleted file mode 100644
index f0ab1a7..0000000
--- a/speaker-test/Android.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := speaker-test
-LOCAL_MODULE_TAGS := eng
-LOCAL_SRC_FILES := pink.c \
- speaker-test.c
-LOCAL_SHARED_LIBRARIES := libasound
-LOCAL_CFLAGS := $(COMMON_ALSA_UTILS_CFLAGS)
-LOCAL_C_INCLUDES := $(COMMON_ALSA_UTILS_INCLUDES)
-
-include $(BUILD_EXECUTABLE)
diff --git a/speaker-test/Makefile.in b/speaker-test/Makefile.in
deleted file mode 100644
index 95360ca..0000000
--- a/speaker-test/Makefile.in
+++ /dev/null
@@ -1,779 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = speaker-test$(EXEEXT)
-subdir = speaker-test
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/depcomp
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_speaker_test_OBJECTS = speaker-test.$(OBJEXT) pink.$(OBJEXT)
-speaker_test_OBJECTS = $(am_speaker_test_OBJECTS)
-speaker_test_LDADD = $(LDADD)
-am__DEPENDENCIES_1 =
-speaker_test_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(speaker_test_SOURCES)
-DIST_SOURCES = $(speaker_test_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-INCLUDES = -I$(top_srcdir)/include
-SUBDIRS = samples
-LDADD = $(LIBINTL) -lm
-speaker_test_SOURCES = speaker-test.c pink.c
-man_MANS = speaker-test.1
-EXTRA_DIST = readme.txt speaker-test.1 pink.h
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign speaker-test/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign speaker-test/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-speaker-test$(EXEEXT): $(speaker_test_OBJECTS) $(speaker_test_DEPENDENCIES) $(EXTRA_speaker_test_DEPENDENCIES)
- @rm -f speaker-test$(EXEEXT)
- $(LINK) $(speaker_test_OBJECTS) $(speaker_test_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pink.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/speaker-test.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically 'make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(PROGRAMS) $(MANS)
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
- cscopelist-recursive ctags-recursive install-am install-strip \
- tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-binPROGRAMS \
- clean-generic cscopelist cscopelist-recursive ctags \
- ctags-recursive distclean distclean-compile distclean-generic \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-binPROGRAMS install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-man1 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am \
- uninstall-binPROGRAMS uninstall-man uninstall-man1
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/speaker-test/NOTICE b/speaker-test/NOTICE
deleted file mode 100644
index 623b625..0000000
--- a/speaker-test/NOTICE
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/speaker-test/samples/Makefile.in b/speaker-test/samples/Makefile.in
deleted file mode 100644
index 558ce12..0000000
--- a/speaker-test/samples/Makefile.in
+++ /dev/null
@@ -1,498 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = speaker-test/samples
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(alsadir)" "$(DESTDIR)$(sounddir)"
-DATA = $(alsa_DATA) $(sound_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-sounddir = $(datadir)/sounds/alsa
-wav_files = Front_Left.wav \
- Rear_Center.wav \
- Rear_Right.wav \
- Side_Right.wav \
- Front_Center.wav \
- Front_Right.wav \
- Noise.wav \
- Rear_Left.wav \
- Side_Left.wav
-
-sound_DATA = $(wav_files)
-alsadir = $(datadir)/alsa/speaker-test
-cfg_files = sample_map.csv
-alsa_DATA = $(cfg_files)
-EXTRA_DIST = \
- $(wav_files) \
- $(cfg_files)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign speaker-test/samples/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign speaker-test/samples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-alsaDATA: $(alsa_DATA)
- @$(NORMAL_INSTALL)
- @list='$(alsa_DATA)'; test -n "$(alsadir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(alsadir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(alsadir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(alsadir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(alsadir)" || exit $$?; \
- done
-
-uninstall-alsaDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(alsa_DATA)'; test -n "$(alsadir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(alsadir)'; $(am__uninstall_files_from_dir)
-install-soundDATA: $(sound_DATA)
- @$(NORMAL_INSTALL)
- @list='$(sound_DATA)'; test -n "$(sounddir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(sounddir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(sounddir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sounddir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(sounddir)" || exit $$?; \
- done
-
-uninstall-soundDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(sound_DATA)'; test -n "$(sounddir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(sounddir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
- for dir in "$(DESTDIR)$(alsadir)" "$(DESTDIR)$(sounddir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-alsaDATA install-soundDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-alsaDATA uninstall-soundDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-alsaDATA install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-soundDATA install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-alsaDATA uninstall-am \
- uninstall-soundDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/speaker-test/speaker-test.1 b/speaker-test/speaker-test.1
index 26d9882..6ef0814 100644
--- a/speaker-test/speaker-test.1
+++ b/speaker-test/speaker-test.1
@@ -11,26 +11,26 @@
. fi
. PP
..
-.TH SPEAKER\-TEST 1 "April 2nd, 2011" speaker\-test
+.TH SPEAKER\-TEST 1 "April 2nd, 2011" speaker-test
.SH NAME
-speaker\-test \- command\-line speaker test tone generator for ALSA
+speaker\-test \- command-line speaker test tone generator for ALSA
.SH SYNOPSIS
.B speaker\-test [\-options]
.SH DESCRIPTION
\fBspeaker\-test\fP generates a tone that can be used to test the speakers of a computer.
-\fBspeaker\-test\fP by default will test the \fIdefault\fP device. If you
+\fBspeaker-test\fP by default will test the \fIdefault\fP device. If you
want to test another sound device you will have first to get a list of
all of the sound cards in your system and the devices associated with
those cards. Notice that there might be for example, one device for
analog sound, one for digital sound and one for HDMI sound.
-To get the list of available cards and devices you can run \fBaplay \-L\fR.
+To get the list of available cards and devices you can run \fBaplay -L\fR.
.P \fBaplay\fR's output will be similar to this one:
.nf
-$ aplay \-L
+$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=ICH5
@@ -48,7 +48,7 @@
.P Each of the devices is listed in the beginning of the definition so,
in the above example, there are four devices listed: null, default, front
and surround40. So, if you want to test the last device you can
-run \fBspeaker\-test \-Dsurround40:ICH5 \-c 6\fR. The \fB\-c\fR option will
+run \fBspeaker-test -Dsurround40:ICH5 -c 6\fR. The \fB-c\fR option will
indicate that the six audio channels in the device have to be tested.
@@ -86,7 +86,7 @@
The default value is 0.
.TP
-\fB\-P\fP | \fB\-\-nperiods\fP \fPPERIODS\fP
+\fB\-P\fP | \fB\-\-nperiods\fP \fPERIODS\fP
Use number of periods. The default value is 4.
.TP
@@ -131,48 +131,39 @@
Specify the directory containing WAV files for playback.
The default path is \fI/usr/share/sounds/alsa\fP.
-.TP
-\fB\-m\fP | \fB\-\-chmap\fP
-Pass the channel map to override.
-If the playback in a specific channel order or channel positions is
-required, pass the channel position strings to this option.
.SH USAGE EXAMPLES
Produce stereo sound from one stereo jack:
.EX
- speaker\-test \-Dplug:front \-c2
+ speaker-test -Dplug:front -c2
.EE
Produce 4 speaker sound from two stereo jacks:
.EX
- speaker\-test \-Dplug:surround40 \-c4
+ speaker-test -Dplug:surround40 -c4
.EE
Produce 5.1 speaker sound from three stereo jacks:
.EX
- speaker\-test \-Dplug:surround51 \-c6
+ speaker-test -Dplug:surround51 -c6
.EE
To send a nice low 75Hz tone to the Woofer and then exit without touching any other speakers:
.EX
- speaker\-test \-Dplug:surround51 \-c6 \-s1 \-f75
+ speaker-test -Dplug:surround51 -c6 -s1 -f75
.EE
-To do a 2\-speaker test using the spdif (coax or optical) output:
+To do a 2-speaker test using the spdif (coax or optical) output:
.EX
- speaker\-test \-Dplug:spdif \-c2
+ speaker-test -Dplug:spdif -c2
.EE
-Play in the order of front\-right and front-left from the front PCM
-.EX
- speaker\-test \-Dplug:front \-c2 \-mFR,FL
-.EE
.SH SEE ALSO
.BR aplay(1)
.SH AUTHOR
-The speaker\-test program was written by James Courtier-Dutton.
+The speaker-test program was written by James Courtier-Dutton.
Pink noise support was added by Nathan Hurst.
Further extensions by Takashi Iwai.
diff --git a/speaker-test/speaker-test.c b/speaker-test/speaker-test.c
index d35065f..3029110 100644
--- a/speaker-test/speaker-test.c
+++ b/speaker-test/speaker-test.c
@@ -45,7 +45,6 @@
#include <inttypes.h>
#include <ctype.h>
#include <byteswap.h>
-#include <signal.h>
#define ALSA_PCM_NEW_HW_PARAMS_API
#define ALSA_PCM_NEW_SW_PARAMS_API
@@ -61,10 +60,6 @@
#include <locale.h>
#endif
-#ifdef SND_CHMAP_API_VERSION
-#define CONFIG_SUPPORT_CHMAP 1
-#endif
-
enum {
TEST_PINK_NOISE = 1,
TEST_SINE,
@@ -104,13 +99,6 @@
static const char *given_test_wav_file = NULL;
static char *wav_file_dir = SOUNDSDIR;
static int debug = 0;
-static int in_aborting = 0;
-static snd_pcm_t *pcm_handle = NULL;
-
-#ifdef CONFIG_SUPPORT_CHMAP
-static snd_pcm_chmap_t *channel_map;
-static int channel_map_set;
-#endif
static const char *const channel_name[MAX_CHANNELS] = {
/* 0 */ N_("Front Left"),
@@ -155,65 +143,6 @@
6, /* Side Left */
5, /* LFE */
};
-
-static int get_mapped_channel(int chn)
-{
-#ifdef CONFIG_SUPPORT_CHMAP
- static const int maps[MAX_CHANNELS] = {
- SND_CHMAP_FL,
- SND_CHMAP_FR,
- SND_CHMAP_RL,
- SND_CHMAP_RR,
- SND_CHMAP_FC,
- SND_CHMAP_LFE,
- SND_CHMAP_SL,
- SND_CHMAP_SR,
- };
-
- if (channel_map && maps[chn]) {
- int i;
- for (i = 0; i < channel_map->channels; i++) {
- if (channel_map->pos[i] == maps[chn])
- return i;
- }
- }
-#endif
- return chn;
-}
-
-static int get_speaker_channel(int chn)
-{
-#ifdef CONFIG_SUPPORT_CHMAP
- if (channel_map_set)
- return chn;
-#endif
-
- switch (channels) {
- case 4:
- chn = channels4[chn];
- break;
- case 6:
- chn = channels6[chn];
- break;
- case 8:
- chn = channels8[chn];
- break;
- }
-
- return get_mapped_channel(chn);
-}
-
-static const char *get_channel_name(int chn)
-{
-#ifdef CONFIG_SUPPORT_CHMAP
- if (channel_map_set && chn < channel_map->channels) {
- const char *name = snd_pcm_chmap_long_name(channel_map->pos[chn]);
- return name ? name : "Unknown";
- }
-#endif
- return gettext(channel_name[chn]);
-}
-
static const int supported_formats[] = {
SND_PCM_FORMAT_S8,
SND_PCM_FORMAT_S16_LE,
@@ -590,31 +519,6 @@
return 0;
}
-#ifdef CONFIG_SUPPORT_CHMAP
-static int config_chmap(snd_pcm_t *handle, const char *mapstr)
-{
- int err;
-
- if (mapstr) {
- channel_map = snd_pcm_chmap_parse_string(mapstr);
- if (!channel_map) {
- fprintf(stderr, _("Unable to parse channel map string: %s\n"), mapstr);
- return -EINVAL;
- }
- err = snd_pcm_set_chmap(handle, channel_map);
- if (err < 0) {
- fprintf(stderr, _("Unable to set channel map: %s\n"), mapstr);
- return err;
- }
- channel_map_set = 1;
- return 0;
- }
-
- channel_map = snd_pcm_get_chmap(handle);
- return 0;
-}
-#endif
-
/*
* Underrun and suspend recovery
*/
@@ -771,16 +675,8 @@
if (given_test_wav_file)
return check_wav_file(chn, given_test_wav_file);
-
-#ifdef CONFIG_SUPPORT_CHMAP
- if (channel_map_set && chn < channel_map->channels) {
- int channel = channel_map->pos[chn] - SND_CHMAP_FL;
- if (channel >= 0 && channel < MAX_CHANNELS)
- return check_wav_file(chn, wavs[channel]);
- }
-#endif
-
- return check_wav_file(chn, wavs[chn]);
+ else
+ return check_wav_file(chn, wavs[chn]);
}
static int read_wav(uint16_t *buf, int channel, int offset, int bufsize)
@@ -788,9 +684,6 @@
static FILE *wavfp = NULL;
int size;
- if (in_aborting)
- return -EFAULT;
-
if (! wav_file[channel]) {
fprintf(stderr, _("Undefined channel %d\n"), channel);
return -EINVAL;
@@ -835,7 +728,7 @@
{
int err;
- while (cptr > 0 && !in_aborting) {
+ while (cptr > 0) {
err = snd_pcm_writei(handle, ptr, cptr);
@@ -844,9 +737,9 @@
if (err < 0) {
fprintf(stderr, _("Write error: %d,%s\n"), err, snd_strerror(err));
- if ((err = xrun_recovery(handle, err)) < 0) {
+ if (xrun_recovery(handle, err) < 0) {
fprintf(stderr, _("xrun_recovery failed: %d,%s\n"), err, snd_strerror(err));
- return err;
+ return -1;
}
break; /* skip one period */
}
@@ -867,13 +760,13 @@
if (test_type == TEST_WAV) {
int bufsize = snd_pcm_frames_to_bytes(handle, period_size);
n = 0;
- while ((err = read_wav((uint16_t *)frames, channel, n, bufsize)) > 0 && !in_aborting) {
+ while ((err = read_wav((uint16_t *)frames, channel, n, bufsize)) > 0) {
n += err;
if ((err = write_buffer(handle, frames,
snd_pcm_bytes_to_frames(handle, err * channels))) < 0)
break;
}
- if (buffer_size > n && !in_aborting) {
+ if (buffer_size > n) {
snd_pcm_drain(handle);
snd_pcm_prepare(handle);
}
@@ -884,7 +777,7 @@
if (periods <= 0)
periods = 1;
- for(n = 0; n < periods && !in_aborting; n++) {
+ for(n = 0; n < periods; n++) {
if (test_type == TEST_PINK_NOISE)
generate_pink_noise(frames, channel, period_size);
else if (test_type == TEST_PATTERN)
@@ -895,37 +788,13 @@
if ((err = write_buffer(handle, frames, period_size)) < 0)
return err;
}
- if (buffer_size > n * period_size && !in_aborting) {
+ if (buffer_size > n * period_size) {
snd_pcm_drain(handle);
snd_pcm_prepare(handle);
}
return 0;
}
-static int prg_exit(int code)
-{
- if (pcm_handle)
- snd_pcm_close(pcm_handle);
- exit(code);
- return code;
-}
-
-static void signal_handler(int sig)
-{
- if (in_aborting)
- return;
-
- in_aborting = 1;
-
- if (pcm_handle)
- snd_pcm_abort(pcm_handle);
- if (sig == SIGABRT) {
- pcm_handle = NULL;
- prg_exit(EXIT_FAILURE);
- }
- signal(sig, signal_handler);
-}
-
static void help(void)
{
const int *fmt;
@@ -946,7 +815,6 @@
"-s,--speaker single speaker test. Values 1=Left, 2=right, etc\n"
"-w,--wavfile Use the given WAV file as a test sound\n"
"-W,--wavdir Specify the directory containing WAV files\n"
- "-m,--chmap Specify the channel map to override\n"
"\n"));
printf(_("Recognized sample formats are:"));
for (fmt = supported_formats; *fmt >= 0; fmt++) {
@@ -969,9 +837,6 @@
double time1,time2,time3;
unsigned int n, nloops;
struct timeval tv1,tv2;
-#ifdef CONFIG_SUPPORT_CHMAP
- const char *chmap = NULL;
-#endif
static const struct option long_option[] = {
{"help", 0, NULL, 'h'},
@@ -989,9 +854,6 @@
{"wavfile", 1, NULL, 'w'},
{"wavdir", 1, NULL, 'W'},
{"debug", 0, NULL, 'd'},
-#ifdef CONFIG_SUPPORT_CHMAP
- {"chmap", 1, NULL, 'm'},
-#endif
{NULL, 0, NULL, 0 },
};
@@ -1010,11 +872,7 @@
while (1) {
int c;
- if ((c = getopt_long(argc, argv, "hD:r:c:f:F:b:p:P:t:l:s:w:W:d"
-#ifdef CONFIG_SUPPORT_CHMAP
- "m:"
-#endif
- , long_option, NULL)) < 0)
+ if ((c = getopt_long(argc, argv, "hD:r:c:f:F:b:p:P:t:l:s:w:W:d", long_option, NULL)) < 0)
break;
switch (c) {
@@ -1037,7 +895,7 @@
case 'r':
rate = atoi(optarg);
rate = rate < 4000 ? 4000 : rate;
- rate = rate > 384000 ? 384000 : rate;
+ rate = rate > 196000 ? 196000 : rate;
break;
case 'c':
channels = atoi(optarg);
@@ -1105,11 +963,6 @@
case 'd':
debug = 1;
break;
-#ifdef CONFIG_SUPPORT_CHMAP
- case 'm':
- chmap = optarg;
- break;
-#endif
default:
fprintf(stderr, _("Unknown option '%c'\n"), c);
exit(EXIT_FAILURE);
@@ -1140,31 +993,21 @@
}
- signal(SIGINT, signal_handler);
- signal(SIGTERM, signal_handler);
- signal(SIGABRT, signal_handler);
-
if ((err = snd_pcm_open(&handle, device, SND_PCM_STREAM_PLAYBACK, 0)) < 0) {
printf(_("Playback open error: %d,%s\n"), err,snd_strerror(err));
- prg_exit(EXIT_FAILURE);
+ exit(EXIT_FAILURE);
}
- pcm_handle = handle;
if ((err = set_hwparams(handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
printf(_("Setting of hwparams failed: %s\n"), snd_strerror(err));
- prg_exit(EXIT_FAILURE);
+ snd_pcm_close(handle);
+ exit(EXIT_FAILURE);
}
if ((err = set_swparams(handle, swparams)) < 0) {
printf(_("Setting of swparams failed: %s\n"), snd_strerror(err));
- prg_exit(EXIT_FAILURE);
+ snd_pcm_close(handle);
+ exit(EXIT_FAILURE);
}
-
-#ifdef CONFIG_SUPPORT_CHMAP
- err = config_chmap(handle, chmap);
- if (err < 0)
- prg_exit(EXIT_FAILURE);
-#endif
-
if (debug) {
snd_output_t *log;
err = snd_output_stdio_attach(&log, stderr, 0);
@@ -1180,30 +1023,40 @@
if (frames == NULL) {
fprintf(stderr, _("No enough memory\n"));
- prg_exit(EXIT_FAILURE);
+ exit(EXIT_FAILURE);
}
-
if (speaker==0) {
if (test_type == TEST_WAV) {
for (chn = 0; chn < channels; chn++) {
- if (setup_wav_file(get_speaker_channel(chn)) < 0)
- prg_exit(EXIT_FAILURE);
+ if (setup_wav_file(chn) < 0)
+ exit(EXIT_FAILURE);
}
}
- for (n = 0; (! nloops || n < nloops) && !in_aborting; n++) {
+ for (n = 0; ! nloops || n < nloops; n++) {
gettimeofday(&tv1, NULL);
for(chn = 0; chn < channels; chn++) {
- int channel = get_speaker_channel(chn);
- printf(" %d - %s\n", channel, get_channel_name(channel));
+ int channel=chn;
+ if (channels == 4) {
+ channel=channels4[chn];
+ }
+ if (channels == 6) {
+ channel=channels6[chn];
+ }
+ if (channels == 8) {
+ channel=channels8[chn];
+ }
+ printf(" %d - %s\n", channel, gettext(channel_name[channel]));
err = write_loop(handle, channel, ((rate*3)/period_size), frames);
if (err < 0) {
fprintf(stderr, _("Transfer failed: %s\n"), snd_strerror(err));
- prg_exit(EXIT_SUCCESS);
+ free(frames);
+ snd_pcm_close(handle);
+ exit(EXIT_SUCCESS);
}
}
gettimeofday(&tv2, NULL);
@@ -1213,15 +1066,13 @@
printf(_("Time per period = %lf\n"), time3 );
}
} else {
- chn = get_speaker_channel(speaker - 1);
-
if (test_type == TEST_WAV) {
- if (setup_wav_file(chn) < 0)
- prg_exit(EXIT_FAILURE);
+ if (setup_wav_file(speaker - 1) < 0)
+ exit(EXIT_FAILURE);
}
- printf(" - %s\n", get_channel_name(chn));
- err = write_loop(handle, chn, ((rate*5)/period_size), frames);
+ printf(" - %s\n", gettext(channel_name[speaker-1]));
+ err = write_loop(handle, speaker-1, ((rate*5)/period_size), frames);
if (err < 0) {
fprintf(stderr, _("Transfer failed: %s\n"), snd_strerror(err));
@@ -1230,6 +1081,7 @@
free(frames);
+ snd_pcm_close(handle);
- return prg_exit(EXIT_SUCCESS);
+ exit(EXIT_SUCCESS);
}
diff --git a/utils/Makefile.in b/utils/Makefile.in
deleted file mode 100644
index be83897..0000000
--- a/utils/Makefile.in
+++ /dev/null
@@ -1,409 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
- { \
- am__dry=no; \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
- | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
- *) \
- for am__flg in $$MAKEFLAGS; do \
- case $$am__flg in \
- *=*|--*) ;; \
- *n*) am__dry=yes; break;; \
- esac; \
- done;; \
- esac; \
- test $$am__dry = yes; \
- }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = utils
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/alsa-utils.spec.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
- $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/include/aconfig.h
-CONFIG_CLEAN_FILES = alsa-utils.spec
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALSACTL_DAEMONSWITCH = @ALSACTL_DAEMONSWITCH@
-ALSACTL_PIDFILE_DIR = @ALSACTL_PIDFILE_DIR@
-ALSA_CFLAGS = @ALSA_CFLAGS@
-ALSA_LIBS = @ALSA_LIBS@
-AMTAR = @AMTAR@
-ASOUND_STATE_DIR = @ASOUND_STATE_DIR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURSESINC = @CURSESINC@
-CURSESLIB = @CURSESLIB@
-CURSES_CFLAGS = @CURSES_CFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBRT = @LIBRT@
-LIBS = @LIBS@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NCURSESW_CFLAGS = @NCURSESW_CFLAGS@
-NCURSESW_LIBS = @NCURSESW_LIBS@
-NCURSES_CFLAGS = @NCURSES_CFLAGS@
-NCURSES_LIBS = @NCURSES_LIBS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SND_UTIL_MAJOR = @SND_UTIL_MAJOR@
-SND_UTIL_MINOR = @SND_UTIL_MINOR@
-SND_UTIL_SUBMINOR = @SND_UTIL_SUBMINOR@
-SND_UTIL_VERSION = @SND_UTIL_VERSION@
-STRIP = @STRIP@
-TESTSOUND = @TESTSOUND@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-ncurses5_config = @ncurses5_config@
-ncursesw5_config = @ncursesw5_config@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-systemdsystemunitdir = @systemdsystemunitdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-udevrulesdir = @udevrulesdir@
-xmlto = @xmlto@
-EXTRA_DIST = buildrpm
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign utils/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-alsa-utils.spec: $(top_builddir)/config.status $(srcdir)/alsa-utils.spec.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
-
-
-rpm: buildrpm alsa-lib.spec
- VERSION=$(VERSION) $(srcdir)/buildrpm
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
